diff options
Diffstat (limited to 'include/linux/kgdb.h')
| -rw-r--r-- | include/linux/kgdb.h | 96 |
1 files changed, 64 insertions, 32 deletions
diff --git a/include/linux/kgdb.h b/include/linux/kgdb.h index c6e091bf39a5..5eebbe7a3545 100644 --- a/include/linux/kgdb.h +++ b/include/linux/kgdb.h @@ -16,6 +16,7 @@ #include <linux/linkage.h> #include <linux/init.h> #include <linux/atomic.h> +#include <linux/kprobes.h> #ifdef CONFIG_HAVE_ARCH_KGDB #include <asm/kgdb.h> #endif @@ -104,9 +105,9 @@ extern int dbg_set_reg(int regno, void *mem, struct pt_regs *regs); */ /** - * kgdb_arch_init - Perform any architecture specific initalization. + * kgdb_arch_init - Perform any architecture specific initialization. * - * This function will handle the initalization of any architecture + * This function will handle the initialization of any architecture * specific callbacks. */ extern int kgdb_arch_init(void); @@ -177,22 +178,39 @@ kgdb_arch_handle_exception(int vector, int signo, int err_code, struct pt_regs *regs); /** + * kgdb_arch_handle_qxfer_pkt - Handle architecture specific GDB XML + * packets. + * @remcom_in_buffer: The buffer of the packet we have read. + * @remcom_out_buffer: The buffer of %BUFMAX bytes to write a packet into. + */ + +extern void +kgdb_arch_handle_qxfer_pkt(char *remcom_in_buffer, + char *remcom_out_buffer); + +/** + * kgdb_call_nmi_hook - Call kgdb_nmicallback() on the current CPU + * @ignored: This parameter is only here to match the prototype. + * + * If you're using the default implementation of kgdb_roundup_cpus() + * this function will be called per CPU. If you don't implement + * kgdb_call_nmi_hook() a default will be used. + */ + +extern void kgdb_call_nmi_hook(void *ignored); + +/** * kgdb_roundup_cpus - Get other CPUs into a holding pattern - * @flags: Current IRQ state * * On SMP systems, we need to get the attention of the other CPUs * and get them into a known state. This should do what is needed * to get the other CPUs to call kgdb_wait(). Note that on some arches, - * the NMI approach is not used for rounding up all the CPUs. For example, - * in case of MIPS, smp_call_function() is used to roundup CPUs. In - * this case, we have to make sure that interrupts are enabled before - * calling smp_call_function(). The argument to this function is - * the flags that will be used when restoring the interrupts. There is - * local_irq_save() call before kgdb_roundup_cpus(). + * the NMI approach is not used for rounding up all the CPUs. Normally + * those architectures can just not implement this and get the default. * * On non-SMP systems, this is not called. */ -extern void kgdb_roundup_cpus(unsigned long flags); +extern void kgdb_roundup_cpus(void); /** * kgdb_arch_set_pc - Generic call back to the program counter @@ -211,9 +229,9 @@ extern int kgdb_arch_set_breakpoint(struct kgdb_bkpt *bpt); extern int kgdb_arch_remove_breakpoint(struct kgdb_bkpt *bpt); /** - * kgdb_arch_late - Perform any architecture specific initalization. + * kgdb_arch_late - Perform any architecture specific initialization. * - * This function will handle the late initalization of any + * This function will handle the late initialization of any * architecture specific callbacks. This is an optional function for * handling things like late initialization of hw breakpoints. The * default implementation does nothing. @@ -239,7 +257,6 @@ extern void kgdb_arch_late(void); * hardware breakpoints. * @correct_hw_break: Allow an architecture to specify how to correct the * hardware debug registers. - * @enable_nmi: Manage NMI-triggered entry to KGDB */ struct kgdb_arch { unsigned char gdb_bpt_instr[BREAK_INSTR_SIZE]; @@ -252,8 +269,6 @@ struct kgdb_arch { void (*disable_hw_break)(struct pt_regs *regs); void (*remove_all_hw_break)(void); void (*correct_hw_break)(void); - - void (*enable_nmi)(bool on); }; /** @@ -263,12 +278,14 @@ struct kgdb_arch { * @write_char: Pointer to a function that will write one char. * @flush: Pointer to a function that will flush any pending writes. * @init: Pointer to a function that will initialize the device. + * @deinit: Pointer to a function that will deinit the device. Implies that + * this I/O driver is temporary and expects to be replaced. Called when + * an I/O driver is replaced or explicitly unregistered. * @pre_exception: Pointer to a function that will do any prep work for * the I/O driver. * @post_exception: Pointer to a function that will do any cleanup work * for the I/O driver. - * @is_console: 1 if the end device is a console 0 if the I/O device is - * not a console + * @cons: valid if the I/O device is a console; else NULL. */ struct kgdb_io { const char *name; @@ -276,24 +293,15 @@ struct kgdb_io { void (*write_char) (u8); void (*flush) (void); int (*init) (void); + void (*deinit) (void); void (*pre_exception) (void); void (*post_exception) (void); - int is_console; + struct console *cons; }; -extern struct kgdb_arch arch_kgdb_ops; - -extern unsigned long __weak kgdb_arch_pc(int exception, struct pt_regs *regs); +extern const struct kgdb_arch arch_kgdb_ops; -#ifdef CONFIG_SERIAL_KGDB_NMI -extern int kgdb_register_nmi_console(void); -extern int kgdb_unregister_nmi_console(void); -extern bool kgdb_nmi_poll_knock(void); -#else -static inline int kgdb_register_nmi_console(void) { return 0; } -static inline int kgdb_unregister_nmi_console(void) { return 0; } -static inline bool kgdb_nmi_poll_knock(void) { return 1; } -#endif +extern unsigned long kgdb_arch_pc(int exception, struct pt_regs *regs); extern int kgdb_register_io_module(struct kgdb_io *local_kgdb_io_ops); extern void kgdb_unregister_io_module(struct kgdb_io *local_kgdb_io_ops); @@ -304,22 +312,46 @@ extern char *kgdb_mem2hex(char *mem, char *buf, int count); extern int kgdb_hex2mem(char *buf, char *mem, int count); extern int kgdb_isremovedbreak(unsigned long addr); -extern void kgdb_schedule_breakpoint(void); +extern int kgdb_has_hit_break(unsigned long addr); extern int kgdb_handle_exception(int ex_vector, int signo, int err_code, struct pt_regs *regs); extern int kgdb_nmicallback(int cpu, void *regs); +extern int kgdb_nmicallin(int cpu, int trapnr, void *regs, int err_code, + atomic_t *snd_rdy); extern void gdbstub_exit(int status); +/* + * kgdb and kprobes both use the same (kprobe) blocklist (which makes sense + * given they are both typically hooked up to the same trap meaning on most + * architectures one cannot be used to debug the other) + * + * However on architectures where kprobes is not (yet) implemented we permit + * breakpoints everywhere rather than blocking everything by default. + */ +static inline bool kgdb_within_blocklist(unsigned long addr) +{ +#ifdef CONFIG_KGDB_HONOUR_BLOCKLIST + return within_kprobe_blacklist(addr); +#else + return false; +#endif +} + extern int kgdb_single_step; extern atomic_t kgdb_active; #define in_dbg_master() \ - (raw_smp_processor_id() == atomic_read(&kgdb_active)) + (irqs_disabled() && (smp_processor_id() == atomic_read(&kgdb_active))) extern bool dbg_is_early; extern void __init dbg_late_init(void); +extern void kgdb_panic(const char *msg); +extern void kgdb_free_init_mem(void); #else /* ! CONFIG_KGDB */ #define in_dbg_master() (0) #define dbg_late_init() +static inline void kgdb_panic(const char *msg) {} +static inline void kgdb_free_init_mem(void) { } +static inline int kgdb_nmicallback(int cpu, void *regs) { return 1; } #endif /* ! CONFIG_KGDB */ #endif /* _KGDB_H_ */ |