diff options
Diffstat (limited to 'include/linux/mdio.h')
| -rw-r--r-- | include/linux/mdio.h | 147 |
1 files changed, 99 insertions, 48 deletions
diff --git a/include/linux/mdio.h b/include/linux/mdio.h index c1b7008826e5..42d6d47e445b 100644 --- a/include/linux/mdio.h +++ b/include/linux/mdio.h @@ -31,23 +31,21 @@ struct mdio_device { struct mii_bus *bus; char modalias[MDIO_NAME_SIZE]; - int (*bus_match)(struct device *dev, struct device_driver *drv); + int (*bus_match)(struct device *dev, const struct device_driver *drv); void (*device_free)(struct mdio_device *mdiodev); void (*device_remove)(struct mdio_device *mdiodev); /* Bus address of the MDIO device (0-31) */ int addr; int flags; + int reset_state; struct gpio_desc *reset_gpio; struct reset_control *reset_ctrl; unsigned int reset_assert_delay; unsigned int reset_deassert_delay; }; -static inline struct mdio_device *to_mdio_device(const struct device *dev) -{ - return container_of(dev, struct mdio_device, dev); -} +#define to_mdio_device(__dev) container_of_const(__dev, struct mdio_device, dev) /* struct mdio_driver_common: Common to all MDIO drivers */ struct mdio_driver_common { @@ -56,11 +54,8 @@ struct mdio_driver_common { }; #define MDIO_DEVICE_FLAG_PHY 1 -static inline struct mdio_driver_common * -to_mdio_common_driver(const struct device_driver *driver) -{ - return container_of(driver, struct mdio_driver_common, driver); -} +#define to_mdio_common_driver(__drv_c) container_of_const(__drv_c, struct mdio_driver_common, \ + driver) /* struct mdio_driver: Generic MDIO driver */ struct mdio_driver { @@ -79,12 +74,8 @@ struct mdio_driver { void (*shutdown)(struct mdio_device *mdiodev); }; -static inline struct mdio_driver * -to_mdio_driver(const struct device_driver *driver) -{ - return container_of(to_mdio_common_driver(driver), struct mdio_driver, - mdiodrv); -} +#define to_mdio_driver(__drv_m) container_of_const(to_mdio_common_driver(__drv_m), \ + struct mdio_driver, mdiodrv) /* device driver data */ static inline void mdiodev_set_drvdata(struct mdio_device *mdio, void *data) @@ -104,7 +95,6 @@ void mdio_device_remove(struct mdio_device *mdiodev); void mdio_device_reset(struct mdio_device *mdiodev, int value); int mdio_driver_register(struct mdio_driver *drv); void mdio_driver_unregister(struct mdio_driver *drv); -int mdio_device_bus_match(struct device *dev, struct device_driver *drv); static inline void mdio_device_get(struct mdio_device *mdiodev) { @@ -171,31 +161,12 @@ extern int mdio_set_flag(const struct mdio_if_info *mdio, bool sense); extern int mdio45_links_ok(const struct mdio_if_info *mdio, u32 mmds); extern int mdio45_nway_restart(const struct mdio_if_info *mdio); -extern void mdio45_ethtool_gset_npage(const struct mdio_if_info *mdio, - struct ethtool_cmd *ecmd, - u32 npage_adv, u32 npage_lpa); extern void mdio45_ethtool_ksettings_get_npage(const struct mdio_if_info *mdio, struct ethtool_link_ksettings *cmd, u32 npage_adv, u32 npage_lpa); /** - * mdio45_ethtool_gset - get settings for ETHTOOL_GSET - * @mdio: MDIO interface - * @ecmd: Ethtool request structure - * - * Since the CSRs for auto-negotiation using next pages are not fully - * standardised, this function does not attempt to decode them. Use - * mdio45_ethtool_gset_npage() to specify advertisement bits from next - * pages. - */ -static inline void mdio45_ethtool_gset(const struct mdio_if_info *mdio, - struct ethtool_cmd *ecmd) -{ - mdio45_ethtool_gset_npage(mdio, ecmd, 0, 0); -} - -/** * mdio45_ethtool_ksettings_get - get settings for ETHTOOL_GLINKSETTINGS * @mdio: MDIO interface * @cmd: Ethtool request structure @@ -372,6 +343,10 @@ static inline void mii_t1_adv_m_mod_linkmode_t(unsigned long *advertising, u32 l { linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT, advertising, lpa & MDIO_AN_T1_ADV_M_B10L); + linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT1_Full_BIT, + advertising, lpa & MDIO_AN_T1_ADV_M_100BT1); + linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT1_Full_BIT, + advertising, lpa & MDIO_AN_T1_ADV_M_1000BT1); } /** @@ -408,6 +383,10 @@ static inline u32 linkmode_adv_to_mii_t1_adv_m_t(unsigned long *advertising) if (linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT, advertising)) result |= MDIO_AN_T1_ADV_M_B10L; + if (linkmode_test_bit(ETHTOOL_LINK_MODE_100baseT1_Full_BIT, advertising)) + result |= MDIO_AN_T1_ADV_M_100BT1; + if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT1_Full_BIT, advertising)) + result |= MDIO_AN_T1_ADV_M_1000BT1; return result; } @@ -420,7 +399,7 @@ static inline u32 linkmode_adv_to_mii_t1_adv_m_t(unsigned long *advertising) * A function that translates value of following registers to the linkmode: * IEEE 802.3-2018 45.2.3.10 "EEE control and capability 1" register (3.20) * IEEE 802.3-2018 45.2.7.13 "EEE advertisement 1" register (7.60) - * IEEE 802.3-2018 45.2.7.14 "EEE "link partner ability 1 register (7.61) + * IEEE 802.3-2018 45.2.7.14 "EEE link partner ability 1" register (7.61) */ static inline void mii_eee_cap1_mod_linkmode_t(unsigned long *adv, u32 val) { @@ -439,6 +418,42 @@ static inline void mii_eee_cap1_mod_linkmode_t(unsigned long *adv, u32 val) } /** + * mii_eee_cap2_mod_linkmode_sup_t() + * @adv: target the linkmode settings + * @val: register value + * + * A function that translates value of following registers to the linkmode: + * IEEE 802.3-2022 45.2.3.11 "EEE control and capability 2" register (3.21) + */ +static inline void mii_eee_cap2_mod_linkmode_sup_t(unsigned long *adv, u32 val) +{ + linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, + adv, val & MDIO_EEE_2_5GT); + linkmode_mod_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT, + adv, val & MDIO_EEE_5GT); +} + +/** + * mii_eee_cap2_mod_linkmode_adv_t() + * @adv: target the linkmode advertisement settings + * @val: register value + * + * A function that translates value of following registers to the linkmode: + * IEEE 802.3-2022 45.2.7.16 "EEE advertisement 2" register (7.62) + * IEEE 802.3-2022 45.2.7.17 "EEE link partner ability 2" register (7.63) + * Note: Currently this function is the same as mii_eee_cap2_mod_linkmode_sup_t. + * For certain, not yet supported, modes however the bits differ. + * Therefore create separate functions already. + */ +static inline void mii_eee_cap2_mod_linkmode_adv_t(unsigned long *adv, u32 val) +{ + linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, + adv, val & MDIO_EEE_2_5GT); + linkmode_mod_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT, + adv, val & MDIO_EEE_5GT); +} + +/** * linkmode_to_mii_eee_cap1_t() * @adv: the linkmode advertisement settings * @@ -466,6 +481,25 @@ static inline u32 linkmode_to_mii_eee_cap1_t(unsigned long *adv) } /** + * linkmode_to_mii_eee_cap2_t() + * @adv: the linkmode advertisement settings + * + * A function that translates linkmode to value for IEEE 802.3-2022 45.2.7.16 + * "EEE advertisement 2" register (7.62) + */ +static inline u32 linkmode_to_mii_eee_cap2_t(unsigned long *adv) +{ + u32 result = 0; + + if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, adv)) + result |= MDIO_EEE_2_5GT; + if (linkmode_test_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT, adv)) + result |= MDIO_EEE_5GT; + + return result; +} + +/** * mii_10base_t1_adv_mod_linkmode_t() * @adv: linkmode advertisement settings * @val: register value @@ -537,6 +571,8 @@ static inline void mii_c73_mod_linkmode(unsigned long *adv, u16 *lpa) int __mdiobus_read(struct mii_bus *bus, int addr, u32 regnum); int __mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val); +int __mdiobus_modify(struct mii_bus *bus, int addr, u32 regnum, u16 mask, + u16 set); int __mdiobus_modify_changed(struct mii_bus *bus, int addr, u32 regnum, u16 mask, u16 set); @@ -564,6 +600,30 @@ int mdiobus_c45_modify(struct mii_bus *bus, int addr, int devad, u32 regnum, int mdiobus_c45_modify_changed(struct mii_bus *bus, int addr, int devad, u32 regnum, u16 mask, u16 set); +static inline int __mdiodev_read(struct mdio_device *mdiodev, u32 regnum) +{ + return __mdiobus_read(mdiodev->bus, mdiodev->addr, regnum); +} + +static inline int __mdiodev_write(struct mdio_device *mdiodev, u32 regnum, + u16 val) +{ + return __mdiobus_write(mdiodev->bus, mdiodev->addr, regnum, val); +} + +static inline int __mdiodev_modify(struct mdio_device *mdiodev, u32 regnum, + u16 mask, u16 set) +{ + return __mdiobus_modify(mdiodev->bus, mdiodev->addr, regnum, mask, set); +} + +static inline int __mdiodev_modify_changed(struct mdio_device *mdiodev, + u32 regnum, u16 mask, u16 set) +{ + return __mdiobus_modify_changed(mdiodev->bus, mdiodev->addr, regnum, + mask, set); +} + static inline int mdiodev_read(struct mdio_device *mdiodev, u32 regnum) { return mdiobus_read(mdiodev->bus, mdiodev->addr, regnum); @@ -629,16 +689,7 @@ struct phy_device *mdiobus_get_phy(struct mii_bus *bus, int addr); * init/exit. Each module may only use this macro once, and calling it * replaces module_init() and module_exit(). */ -#define mdio_module_driver(_mdio_driver) \ -static int __init mdio_module_init(void) \ -{ \ - return mdio_driver_register(&_mdio_driver); \ -} \ -module_init(mdio_module_init); \ -static void __exit mdio_module_exit(void) \ -{ \ - mdio_driver_unregister(&_mdio_driver); \ -} \ -module_exit(mdio_module_exit) +#define mdio_module_driver(_mdio_driver) \ + module_driver(_mdio_driver, mdio_driver_register, mdio_driver_unregister) #endif /* __LINUX_MDIO_H__ */ |