diff options
Diffstat (limited to 'include/linux/mfd/rtsx_pci.h')
| -rw-r--r-- | include/linux/mfd/rtsx_pci.h | 855 |
1 files changed, 0 insertions, 855 deletions
diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h deleted file mode 100644 index 7a9f7089435d..000000000000 --- a/include/linux/mfd/rtsx_pci.h +++ /dev/null @@ -1,855 +0,0 @@ -/* Driver for Realtek PCI-Express card reader - * - * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2, or (at your option) any - * later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, see <http://www.gnu.org/licenses/>. - * - * Author: - * Wei WANG <wei_wang@realsil.com.cn> - * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China - */ - -#ifndef __RTSX_PCI_H -#define __RTSX_PCI_H - -#include <linux/sched.h> -#include <linux/pci.h> - -#include "rtsx_common.h" - -#define MAX_RW_REG_CNT 1024 - -/* PCI Operation Register Address */ -#define RTSX_HCBAR 0x00 -#define RTSX_HCBCTLR 0x04 -#define RTSX_HDBAR 0x08 -#define RTSX_HDBCTLR 0x0C -#define RTSX_HAIMR 0x10 -#define RTSX_BIPR 0x14 -#define RTSX_BIER 0x18 - -/* Host command buffer control register */ -#define STOP_CMD (0x01 << 28) - -/* Host data buffer control register */ -#define SDMA_MODE 0x00 -#define ADMA_MODE (0x02 << 26) -#define STOP_DMA (0x01 << 28) -#define TRIG_DMA (0x01 << 31) - -/* Host access internal memory register */ -#define HAIMR_TRANS_START (0x01 << 31) -#define HAIMR_READ 0x00 -#define HAIMR_WRITE (0x01 << 30) -#define HAIMR_READ_START (HAIMR_TRANS_START | HAIMR_READ) -#define HAIMR_WRITE_START (HAIMR_TRANS_START | HAIMR_WRITE) -#define HAIMR_TRANS_END (HAIMR_TRANS_START) - -/* Bus interrupt pending register */ -#define CMD_DONE_INT (1 << 31) -#define DATA_DONE_INT (1 << 30) -#define TRANS_OK_INT (1 << 29) -#define TRANS_FAIL_INT (1 << 28) -#define XD_INT (1 << 27) -#define MS_INT (1 << 26) -#define SD_INT (1 << 25) -#define GPIO0_INT (1 << 24) -#define OC_INT (1 << 23) -#define SD_WRITE_PROTECT (1 << 19) -#define XD_EXIST (1 << 18) -#define MS_EXIST (1 << 17) -#define SD_EXIST (1 << 16) -#define DELINK_INT GPIO0_INT -#define MS_OC_INT (1 << 23) -#define SD_OC_INT (1 << 22) - -#define CARD_INT (XD_INT | MS_INT | SD_INT) -#define NEED_COMPLETE_INT (DATA_DONE_INT | TRANS_OK_INT | TRANS_FAIL_INT) -#define RTSX_INT (CMD_DONE_INT | NEED_COMPLETE_INT | \ - CARD_INT | GPIO0_INT | OC_INT) - -#define CARD_EXIST (XD_EXIST | MS_EXIST | SD_EXIST) - -/* Bus interrupt enable register */ -#define CMD_DONE_INT_EN (1 << 31) -#define DATA_DONE_INT_EN (1 << 30) -#define TRANS_OK_INT_EN (1 << 29) -#define TRANS_FAIL_INT_EN (1 << 28) -#define XD_INT_EN (1 << 27) -#define MS_INT_EN (1 << 26) -#define SD_INT_EN (1 << 25) -#define GPIO0_INT_EN (1 << 24) -#define OC_INT_EN (1 << 23) -#define DELINK_INT_EN GPIO0_INT_EN -#define MS_OC_INT_EN (1 << 23) -#define SD_OC_INT_EN (1 << 22) - -#define READ_REG_CMD 0 -#define WRITE_REG_CMD 1 -#define CHECK_REG_CMD 2 - -/* - * macros for easy use - */ -#define rtsx_pci_writel(pcr, reg, value) \ - iowrite32(value, (pcr)->remap_addr + reg) -#define rtsx_pci_readl(pcr, reg) \ - ioread32((pcr)->remap_addr + reg) -#define rtsx_pci_writew(pcr, reg, value) \ - iowrite16(value, (pcr)->remap_addr + reg) -#define rtsx_pci_readw(pcr, reg) \ - ioread16((pcr)->remap_addr + reg) -#define rtsx_pci_writeb(pcr, reg, value) \ - iowrite8(value, (pcr)->remap_addr + reg) -#define rtsx_pci_readb(pcr, reg) \ - ioread8((pcr)->remap_addr + reg) - -#define rtsx_pci_read_config_byte(pcr, where, val) \ - pci_read_config_byte((pcr)->pci, where, val) - -#define rtsx_pci_write_config_byte(pcr, where, val) \ - pci_write_config_byte((pcr)->pci, where, val) - -#define rtsx_pci_read_config_dword(pcr, where, val) \ - pci_read_config_dword((pcr)->pci, where, val) - -#define rtsx_pci_write_config_dword(pcr, where, val) \ - pci_write_config_dword((pcr)->pci, where, val) - -#define STATE_TRANS_NONE 0 -#define STATE_TRANS_CMD 1 -#define STATE_TRANS_BUF 2 -#define STATE_TRANS_SG 3 - -#define TRANS_NOT_READY 0 -#define TRANS_RESULT_OK 1 -#define TRANS_RESULT_FAIL 2 -#define TRANS_NO_DEVICE 3 - -#define RTSX_RESV_BUF_LEN 4096 -#define HOST_CMDS_BUF_LEN 1024 -#define HOST_SG_TBL_BUF_LEN (RTSX_RESV_BUF_LEN - HOST_CMDS_BUF_LEN) -#define HOST_SG_TBL_ITEMS (HOST_SG_TBL_BUF_LEN / 8) -#define MAX_SG_ITEM_LEN 0x80000 - -#define HOST_TO_DEVICE 0 -#define DEVICE_TO_HOST 1 - -#define MAX_PHASE 31 -#define RX_TUNING_CNT 3 - -/* SG descriptor */ -#define SG_INT 0x04 -#define SG_END 0x02 -#define SG_VALID 0x01 - -#define SG_NO_OP 0x00 -#define SG_TRANS_DATA (0x02 << 4) -#define SG_LINK_DESC (0x03 << 4) - -/* Output voltage */ -#define OUTPUT_3V3 0 -#define OUTPUT_1V8 1 - -/* Card Clock Enable Register */ -#define SD_CLK_EN 0x04 -#define MS_CLK_EN 0x08 - -/* Card Select Register */ -#define SD_MOD_SEL 2 -#define MS_MOD_SEL 3 - -/* Card Output Enable Register */ -#define SD_OUTPUT_EN 0x04 -#define MS_OUTPUT_EN 0x08 - -/* CARD_SHARE_MODE */ -#define CARD_SHARE_MASK 0x0F -#define CARD_SHARE_MULTI_LUN 0x00 -#define CARD_SHARE_NORMAL 0x00 -#define CARD_SHARE_48_SD 0x04 -#define CARD_SHARE_48_MS 0x08 -/* CARD_SHARE_MODE for barossa */ -#define CARD_SHARE_BAROSSA_SD 0x01 -#define CARD_SHARE_BAROSSA_MS 0x02 - -/* SD30_DRIVE_SEL */ -#define DRIVER_TYPE_A 0x05 -#define DRIVER_TYPE_B 0x03 -#define DRIVER_TYPE_C 0x02 -#define DRIVER_TYPE_D 0x01 - -/* FPDCTL */ -#define SSC_POWER_DOWN 0x01 -#define SD_OC_POWER_DOWN 0x02 -#define ALL_POWER_DOWN 0x07 -#define OC_POWER_DOWN 0x06 - -/* CLK_CTL */ -#define CHANGE_CLK 0x01 - -/* LDO_CTL */ -#define BPP_ASIC_1V7 0x00 -#define BPP_ASIC_1V8 0x01 -#define BPP_ASIC_1V9 0x02 -#define BPP_ASIC_2V0 0x03 -#define BPP_ASIC_2V7 0x04 -#define BPP_ASIC_2V8 0x05 -#define BPP_ASIC_3V2 0x06 -#define BPP_ASIC_3V3 0x07 -#define BPP_REG_TUNED18 0x07 -#define BPP_TUNED18_SHIFT_8402 5 -#define BPP_TUNED18_SHIFT_8411 4 -#define BPP_PAD_MASK 0x04 -#define BPP_PAD_3V3 0x04 -#define BPP_PAD_1V8 0x00 -#define BPP_LDO_POWB 0x03 -#define BPP_LDO_ON 0x00 -#define BPP_LDO_SUSPEND 0x02 -#define BPP_LDO_OFF 0x03 - -/* CD_PAD_CTL */ -#define CD_DISABLE_MASK 0x07 -#define MS_CD_DISABLE 0x04 -#define SD_CD_DISABLE 0x02 -#define XD_CD_DISABLE 0x01 -#define CD_DISABLE 0x07 -#define CD_ENABLE 0x00 -#define MS_CD_EN_ONLY 0x03 -#define SD_CD_EN_ONLY 0x05 -#define XD_CD_EN_ONLY 0x06 -#define FORCE_CD_LOW_MASK 0x38 -#define FORCE_CD_XD_LOW 0x08 -#define FORCE_CD_SD_LOW 0x10 -#define FORCE_CD_MS_LOW 0x20 -#define CD_AUTO_DISABLE 0x40 - -/* SD_STAT1 */ -#define SD_CRC7_ERR 0x80 -#define SD_CRC16_ERR 0x40 -#define SD_CRC_WRITE_ERR 0x20 -#define SD_CRC_WRITE_ERR_MASK 0x1C -#define GET_CRC_TIME_OUT 0x02 -#define SD_TUNING_COMPARE_ERR 0x01 - -/* SD_STAT2 */ -#define SD_RSP_80CLK_TIMEOUT 0x01 - -/* SD_BUS_STAT */ -#define SD_CLK_TOGGLE_EN 0x80 -#define SD_CLK_FORCE_STOP 0x40 -#define SD_DAT3_STATUS 0x10 -#define SD_DAT2_STATUS 0x08 -#define SD_DAT1_STATUS 0x04 -#define SD_DAT0_STATUS 0x02 -#define SD_CMD_STATUS 0x01 - -/* SD_PAD_CTL */ -#define SD_IO_USING_1V8 0x80 -#define SD_IO_USING_3V3 0x7F -#define TYPE_A_DRIVING 0x00 -#define TYPE_B_DRIVING 0x01 -#define TYPE_C_DRIVING 0x02 -#define TYPE_D_DRIVING 0x03 - -/* SD_SAMPLE_POINT_CTL */ -#define DDR_FIX_RX_DAT 0x00 -#define DDR_VAR_RX_DAT 0x80 -#define DDR_FIX_RX_DAT_EDGE 0x00 -#define DDR_FIX_RX_DAT_14_DELAY 0x40 -#define DDR_FIX_RX_CMD 0x00 -#define DDR_VAR_RX_CMD 0x20 -#define DDR_FIX_RX_CMD_POS_EDGE 0x00 -#define DDR_FIX_RX_CMD_14_DELAY 0x10 -#define SD20_RX_POS_EDGE 0x00 -#define SD20_RX_14_DELAY 0x08 -#define SD20_RX_SEL_MASK 0x08 - -/* SD_PUSH_POINT_CTL */ -#define DDR_FIX_TX_CMD_DAT 0x00 -#define DDR_VAR_TX_CMD_DAT 0x80 -#define DDR_FIX_TX_DAT_14_TSU 0x00 -#define DDR_FIX_TX_DAT_12_TSU 0x40 -#define DDR_FIX_TX_CMD_NEG_EDGE 0x00 -#define DDR_FIX_TX_CMD_14_AHEAD 0x20 -#define SD20_TX_NEG_EDGE 0x00 -#define SD20_TX_14_AHEAD 0x10 -#define SD20_TX_SEL_MASK 0x10 -#define DDR_VAR_SDCLK_POL_SWAP 0x01 - -/* SD_TRANSFER */ -#define SD_TRANSFER_START 0x80 -#define SD_TRANSFER_END 0x40 -#define SD_STAT_IDLE 0x20 -#define SD_TRANSFER_ERR 0x10 -/* SD Transfer Mode definition */ -#define SD_TM_NORMAL_WRITE 0x00 -#define SD_TM_AUTO_WRITE_3 0x01 -#define SD_TM_AUTO_WRITE_4 0x02 -#define SD_TM_AUTO_READ_3 0x05 -#define SD_TM_AUTO_READ_4 0x06 -#define SD_TM_CMD_RSP 0x08 -#define SD_TM_AUTO_WRITE_1 0x09 -#define SD_TM_AUTO_WRITE_2 0x0A -#define SD_TM_NORMAL_READ 0x0C -#define SD_TM_AUTO_READ_1 0x0D -#define SD_TM_AUTO_READ_2 0x0E -#define SD_TM_AUTO_TUNING 0x0F - -/* SD_VPTX_CTL / SD_VPRX_CTL */ -#define PHASE_CHANGE 0x80 -#define PHASE_NOT_RESET 0x40 - -/* SD_DCMPS_TX_CTL / SD_DCMPS_RX_CTL */ -#define DCMPS_CHANGE 0x80 -#define DCMPS_CHANGE_DONE 0x40 -#define DCMPS_ERROR 0x20 -#define DCMPS_CURRENT_PHASE 0x1F - -/* SD Configure 1 Register */ -#define SD_CLK_DIVIDE_0 0x00 -#define SD_CLK_DIVIDE_256 0xC0 -#define SD_CLK_DIVIDE_128 0x80 -#define SD_BUS_WIDTH_1BIT 0x00 -#define SD_BUS_WIDTH_4BIT 0x01 -#define SD_BUS_WIDTH_8BIT 0x02 -#define SD_ASYNC_FIFO_NOT_RST 0x10 -#define SD_20_MODE 0x00 -#define SD_DDR_MODE 0x04 -#define SD_30_MODE 0x08 - -#define SD_CLK_DIVIDE_MASK 0xC0 - -/* SD_CMD_STATE */ -#define SD_CMD_IDLE 0x80 - -/* SD_DATA_STATE */ -#define SD_DATA_IDLE 0x80 - -/* DCM_DRP_CTL */ -#define DCM_RESET 0x08 -#define DCM_LOCKED 0x04 -#define DCM_208M 0x00 -#define DCM_TX 0x01 -#define DCM_RX 0x02 - -/* DCM_DRP_TRIG */ -#define DRP_START 0x80 -#define DRP_DONE 0x40 - -/* DCM_DRP_CFG */ -#define DRP_WRITE 0x80 -#define DRP_READ 0x00 -#define DCM_WRITE_ADDRESS_50 0x50 -#define DCM_WRITE_ADDRESS_51 0x51 -#define DCM_READ_ADDRESS_00 0x00 -#define DCM_READ_ADDRESS_51 0x51 - -/* IRQSTAT0 */ -#define DMA_DONE_INT 0x80 -#define SUSPEND_INT 0x40 -#define LINK_RDY_INT 0x20 -#define LINK_DOWN_INT 0x10 - -/* DMACTL */ -#define DMA_RST 0x80 -#define DMA_BUSY 0x04 -#define DMA_DIR_TO_CARD 0x00 -#define DMA_DIR_FROM_CARD 0x02 -#define DMA_EN 0x01 -#define DMA_128 (0 << 4) -#define DMA_256 (1 << 4) -#define DMA_512 (2 << 4) -#define DMA_1024 (3 << 4) -#define DMA_PACK_SIZE_MASK 0x30 - -/* SSC_CTL1 */ -#define SSC_RSTB 0x80 -#define SSC_8X_EN 0x40 -#define SSC_FIX_FRAC 0x20 -#define SSC_SEL_1M 0x00 -#define SSC_SEL_2M 0x08 -#define SSC_SEL_4M 0x10 -#define SSC_SEL_8M 0x18 - -/* SSC_CTL2 */ -#define SSC_DEPTH_MASK 0x07 -#define SSC_DEPTH_DISALBE 0x00 -#define SSC_DEPTH_4M 0x01 -#define SSC_DEPTH_2M 0x02 -#define SSC_DEPTH_1M 0x03 -#define SSC_DEPTH_500K 0x04 -#define SSC_DEPTH_250K 0x05 - -/* System Clock Control Register */ -#define CLK_LOW_FREQ 0x01 - -/* System Clock Divider Register */ -#define CLK_DIV_1 0x01 -#define CLK_DIV_2 0x02 -#define CLK_DIV_4 0x03 -#define CLK_DIV_8 0x04 - -/* MS_CFG */ -#define SAMPLE_TIME_RISING 0x00 -#define SAMPLE_TIME_FALLING 0x80 -#define PUSH_TIME_DEFAULT 0x00 -#define PUSH_TIME_ODD 0x40 -#define NO_EXTEND_TOGGLE 0x00 -#define EXTEND_TOGGLE_CHK 0x20 -#define MS_BUS_WIDTH_1 0x00 -#define MS_BUS_WIDTH_4 0x10 -#define MS_BUS_WIDTH_8 0x18 -#define MS_2K_SECTOR_MODE 0x04 -#define MS_512_SECTOR_MODE 0x00 -#define MS_TOGGLE_TIMEOUT_EN 0x00 -#define MS_TOGGLE_TIMEOUT_DISEN 0x01 -#define MS_NO_CHECK_INT 0x02 - -/* MS_TRANS_CFG */ -#define WAIT_INT 0x80 -#define NO_WAIT_INT 0x00 -#define NO_AUTO_READ_INT_REG 0x00 -#define AUTO_READ_INT_REG 0x40 -#define MS_CRC16_ERR 0x20 -#define MS_RDY_TIMEOUT 0x10 -#define MS_INT_CMDNK 0x08 -#define MS_INT_BREQ 0x04 -#define MS_INT_ERR 0x02 -#define MS_INT_CED 0x01 - -/* MS_TRANSFER */ -#define MS_TRANSFER_START 0x80 -#define MS_TRANSFER_END 0x40 -#define MS_TRANSFER_ERR 0x20 -#define MS_BS_STATE 0x10 -#define MS_TM_READ_BYTES 0x00 -#define MS_TM_NORMAL_READ 0x01 -#define MS_TM_WRITE_BYTES 0x04 -#define MS_TM_NORMAL_WRITE 0x05 -#define MS_TM_AUTO_READ 0x08 -#define MS_TM_AUTO_WRITE 0x0C - -/* SD Configure 2 Register */ -#define SD_CALCULATE_CRC7 0x00 -#define SD_NO_CALCULATE_CRC7 0x80 -#define SD_CHECK_CRC16 0x00 -#define SD_NO_CHECK_CRC16 0x40 -#define SD_NO_CHECK_WAIT_CRC_TO 0x20 -#define SD_WAIT_BUSY_END 0x08 -#define SD_NO_WAIT_BUSY_END 0x00 -#define SD_CHECK_CRC7 0x00 -#define SD_NO_CHECK_CRC7 0x04 -#define SD_RSP_LEN_0 0x00 -#define SD_RSP_LEN_6 0x01 -#define SD_RSP_LEN_17 0x02 -/* SD/MMC Response Type Definition */ -#define SD_RSP_TYPE_R0 0x04 -#define SD_RSP_TYPE_R1 0x01 -#define SD_RSP_TYPE_R1b 0x09 -#define SD_RSP_TYPE_R2 0x02 -#define SD_RSP_TYPE_R3 0x05 -#define SD_RSP_TYPE_R4 0x05 -#define SD_RSP_TYPE_R5 0x01 -#define SD_RSP_TYPE_R6 0x01 -#define SD_RSP_TYPE_R7 0x01 - -/* SD_CONFIGURE3 */ -#define SD_RSP_80CLK_TIMEOUT_EN 0x01 - -/* Card Transfer Reset Register */ -#define SPI_STOP 0x01 -#define XD_STOP 0x02 -#define SD_STOP 0x04 -#define MS_STOP 0x08 -#define SPI_CLR_ERR 0x10 -#define XD_CLR_ERR 0x20 -#define SD_CLR_ERR 0x40 -#define MS_CLR_ERR 0x80 - -/* Card Data Source Register */ -#define PINGPONG_BUFFER 0x01 -#define RING_BUFFER 0x00 - -/* Card Power Control Register */ -#define PMOS_STRG_MASK 0x10 -#define PMOS_STRG_800mA 0x10 -#define PMOS_STRG_400mA 0x00 -#define SD_POWER_OFF 0x03 -#define SD_PARTIAL_POWER_ON 0x01 -#define SD_POWER_ON 0x00 -#define SD_POWER_MASK 0x03 -#define MS_POWER_OFF 0x0C -#define MS_PARTIAL_POWER_ON 0x04 -#define MS_POWER_ON 0x00 -#define MS_POWER_MASK 0x0C -#define BPP_POWER_OFF 0x0F -#define BPP_POWER_5_PERCENT_ON 0x0E -#define BPP_POWER_10_PERCENT_ON 0x0C -#define BPP_POWER_15_PERCENT_ON 0x08 -#define BPP_POWER_ON 0x00 -#define BPP_POWER_MASK 0x0F -#define SD_VCC_PARTIAL_POWER_ON 0x02 -#define SD_VCC_POWER_ON 0x00 - -/* PWR_GATE_CTRL */ -#define PWR_GATE_EN 0x01 -#define LDO3318_PWR_MASK 0x06 -#define LDO_ON 0x00 -#define LDO_SUSPEND 0x04 -#define LDO_OFF 0x06 - -/* CARD_CLK_SOURCE */ -#define CRC_FIX_CLK (0x00 << 0) -#define CRC_VAR_CLK0 (0x01 << 0) -#define CRC_VAR_CLK1 (0x02 << 0) -#define SD30_FIX_CLK (0x00 << 2) -#define SD30_VAR_CLK0 (0x01 << 2) -#define SD30_VAR_CLK1 (0x02 << 2) -#define SAMPLE_FIX_CLK (0x00 << 4) -#define SAMPLE_VAR_CLK0 (0x01 << 4) -#define SAMPLE_VAR_CLK1 (0x02 << 4) - -#define MS_CFG 0xFD40 -#define MS_TPC 0xFD41 -#define MS_TRANS_CFG 0xFD42 -#define MS_TRANSFER 0xFD43 -#define MS_INT_REG 0xFD44 -#define MS_BYTE_CNT 0xFD45 -#define MS_SECTOR_CNT_L 0xFD46 -#define MS_SECTOR_CNT_H 0xFD47 -#define MS_DBUS_H 0xFD48 - -#define SD_CFG1 0xFDA0 -#define SD_CFG2 0xFDA1 -#define SD_CFG3 0xFDA2 -#define SD_STAT1 0xFDA3 -#define SD_STAT2 0xFDA4 -#define SD_BUS_STAT 0xFDA5 -#define SD_PAD_CTL 0xFDA6 -#define SD_SAMPLE_POINT_CTL 0xFDA7 -#define SD_PUSH_POINT_CTL 0xFDA8 -#define SD_CMD0 0xFDA9 -#define SD_CMD1 0xFDAA -#define SD_CMD2 0xFDAB -#define SD_CMD3 0xFDAC -#define SD_CMD4 0xFDAD -#define SD_CMD5 0xFDAE -#define SD_BYTE_CNT_L 0xFDAF -#define SD_BYTE_CNT_H 0xFDB0 -#define SD_BLOCK_CNT_L 0xFDB1 -#define SD_BLOCK_CNT_H 0xFDB2 -#define SD_TRANSFER 0xFDB3 -#define SD_CMD_STATE 0xFDB5 -#define SD_DATA_STATE 0xFDB6 - -#define SRCTL 0xFC13 - -#define DCM_DRP_CTL 0xFC23 -#define DCM_DRP_TRIG 0xFC24 -#define DCM_DRP_CFG 0xFC25 -#define DCM_DRP_WR_DATA_L 0xFC26 -#define DCM_DRP_WR_DATA_H 0xFC27 -#define DCM_DRP_RD_DATA_L 0xFC28 -#define DCM_DRP_RD_DATA_H 0xFC29 -#define SD_VPCLK0_CTL 0xFC2A -#define SD_VPCLK1_CTL 0xFC2B -#define SD_DCMPS0_CTL 0xFC2C -#define SD_DCMPS1_CTL 0xFC2D -#define SD_VPTX_CTL SD_VPCLK0_CTL -#define SD_VPRX_CTL SD_VPCLK1_CTL -#define SD_DCMPS_TX_CTL SD_DCMPS0_CTL -#define SD_DCMPS_RX_CTL SD_DCMPS1_CTL -#define CARD_CLK_SOURCE 0xFC2E - -#define CARD_PWR_CTL 0xFD50 -#define CARD_CLK_SWITCH 0xFD51 -#define RTL8411B_PACKAGE_MODE 0xFD51 -#define CARD_SHARE_MODE 0xFD52 -#define CARD_DRIVE_SEL 0xFD53 -#define CARD_STOP 0xFD54 -#define CARD_OE 0xFD55 -#define CARD_AUTO_BLINK 0xFD56 -#define CARD_GPIO_DIR 0xFD57 -#define CARD_GPIO 0xFD58 -#define CARD_DATA_SOURCE 0xFD5B -#define SD30_CLK_DRIVE_SEL 0xFD5A -#define CARD_SELECT 0xFD5C -#define SD30_DRIVE_SEL 0xFD5E -#define SD30_CMD_DRIVE_SEL 0xFD5E -#define SD30_DAT_DRIVE_SEL 0xFD5F -#define CARD_CLK_EN 0xFD69 -#define SDIO_CTRL 0xFD6B -#define CD_PAD_CTL 0xFD73 - -#define FPDCTL 0xFC00 -#define PDINFO 0xFC01 - -#define CLK_CTL 0xFC02 -#define CLK_DIV 0xFC03 -#define CLK_SEL 0xFC04 - -#define SSC_DIV_N_0 0xFC0F -#define SSC_DIV_N_1 0xFC10 -#define SSC_CTL1 0xFC11 -#define SSC_CTL2 0xFC12 - -#define RCCTL 0xFC14 - -#define FPGA_PULL_CTL 0xFC1D -#define OLT_LED_CTL 0xFC1E -#define GPIO_CTL 0xFC1F - -#define LDO_CTL 0xFC1E -#define SYS_VER 0xFC32 - -#define CARD_PULL_CTL1 0xFD60 -#define CARD_PULL_CTL2 0xFD61 -#define CARD_PULL_CTL3 0xFD62 -#define CARD_PULL_CTL4 0xFD63 -#define CARD_PULL_CTL5 0xFD64 -#define CARD_PULL_CTL6 0xFD65 - -/* PCI Express Related Registers */ -#define IRQEN0 0xFE20 -#define IRQSTAT0 0xFE21 -#define IRQEN1 0xFE22 -#define IRQSTAT1 0xFE23 -#define TLPRIEN 0xFE24 -#define TLPRISTAT 0xFE25 -#define TLPTIEN 0xFE26 -#define TLPTISTAT 0xFE27 -#define DMATC0 0xFE28 -#define DMATC1 0xFE29 -#define DMATC2 0xFE2A -#define DMATC3 0xFE2B -#define DMACTL 0xFE2C -#define BCTL 0xFE2D -#define RBBC0 0xFE2E -#define RBBC1 0xFE2F -#define RBDAT 0xFE30 -#define RBCTL 0xFE34 -#define CFGADDR0 0xFE35 -#define CFGADDR1 0xFE36 -#define CFGDATA0 0xFE37 -#define CFGDATA1 0xFE38 -#define CFGDATA2 0xFE39 -#define CFGDATA3 0xFE3A -#define CFGRWCTL 0xFE3B -#define PHYRWCTL 0xFE3C -#define PHYDATA0 0xFE3D -#define PHYDATA1 0xFE3E -#define PHYADDR 0xFE3F -#define MSGRXDATA0 0xFE40 -#define MSGRXDATA1 0xFE41 -#define MSGRXDATA2 0xFE42 -#define MSGRXDATA3 0xFE43 -#define MSGTXDATA0 0xFE44 -#define MSGTXDATA1 0xFE45 -#define MSGTXDATA2 0xFE46 -#define MSGTXDATA3 0xFE47 -#define MSGTXCTL 0xFE48 -#define PETXCFG 0xFE49 -#define LTR_CTL 0xFE4A -#define OBFF_CFG 0xFE4C - -#define CDRESUMECTL 0xFE52 -#define WAKE_SEL_CTL 0xFE54 -#define PME_FORCE_CTL 0xFE56 -#define ASPM_FORCE_CTL 0xFE57 -#define PM_CLK_FORCE_CTL 0xFE58 -#define PERST_GLITCH_WIDTH 0xFE5C -#define CHANGE_LINK_STATE 0xFE5B -#define RESET_LOAD_REG 0xFE5E -#define EFUSE_CONTENT 0xFE5F -#define HOST_SLEEP_STATE 0xFE60 -#define SDIO_CFG 0xFE70 - -#define NFTS_TX_CTRL 0xFE72 - -#define PWR_GATE_CTRL 0xFE75 -#define PWD_SUSPEND_EN 0xFE76 -#define LDO_PWR_SEL 0xFE78 - -#define DUMMY_REG_RESET_0 0xFE90 - -/* Memory mapping */ -#define SRAM_BASE 0xE600 -#define RBUF_BASE 0xF400 -#define PPBUF_BASE1 0xF800 -#define PPBUF_BASE2 0xFA00 -#define IMAGE_FLAG_ADDR0 0xCE80 -#define IMAGE_FLAG_ADDR1 0xCE81 - -/* Phy register */ -#define PHY_PCR 0x00 -#define PHY_RCR0 0x01 -#define PHY_RCR1 0x02 -#define PHY_RCR2 0x03 -#define PHY_RTCR 0x04 -#define PHY_RDR 0x05 -#define PHY_TCR0 0x06 -#define PHY_TCR1 0x07 -#define PHY_TUNE 0x08 -#define PHY_IMR 0x09 -#define PHY_BPCR 0x0A -#define PHY_BIST 0x0B -#define PHY_RAW_L 0x0C -#define PHY_RAW_H 0x0D -#define PHY_RAW_DATA 0x0E -#define PHY_HOST_CLK_CTRL 0x0F -#define PHY_DMR 0x10 -#define PHY_BACR 0x11 -#define PHY_IER 0x12 -#define PHY_BCSR 0x13 -#define PHY_BPR 0x14 -#define PHY_BPNR2 0x15 -#define PHY_BPNR 0x16 -#define PHY_BRNR2 0x17 -#define PHY_BENR 0x18 -#define PHY_REG_REV 0x19 -#define PHY_FLD0 0x1A -#define PHY_FLD1 0x1B -#define PHY_FLD2 0x1C -#define PHY_FLD3 0x1D -#define PHY_FLD4 0x1E -#define PHY_DUM_REG 0x1F - -#define rtsx_pci_init_cmd(pcr) ((pcr)->ci = 0) - -struct rtsx_pcr; - -struct pcr_handle { - struct rtsx_pcr *pcr; -}; - -struct pcr_ops { - int (*extra_init_hw)(struct rtsx_pcr *pcr); - int (*optimize_phy)(struct rtsx_pcr *pcr); - int (*turn_on_led)(struct rtsx_pcr *pcr); - int (*turn_off_led)(struct rtsx_pcr *pcr); - int (*enable_auto_blink)(struct rtsx_pcr *pcr); - int (*disable_auto_blink)(struct rtsx_pcr *pcr); - int (*card_power_on)(struct rtsx_pcr *pcr, int card); - int (*card_power_off)(struct rtsx_pcr *pcr, int card); - int (*switch_output_voltage)(struct rtsx_pcr *pcr, - u8 voltage); - unsigned int (*cd_deglitch)(struct rtsx_pcr *pcr); - int (*conv_clk_and_div_n)(int clk, int dir); -}; - -enum PDEV_STAT {PDEV_STAT_IDLE, PDEV_STAT_RUN}; - -struct rtsx_pcr { - struct pci_dev *pci; - unsigned int id; - - /* pci resources */ - unsigned long addr; - void __iomem *remap_addr; - int irq; - - /* host reserved buffer */ - void *rtsx_resv_buf; - dma_addr_t rtsx_resv_buf_addr; - - void *host_cmds_ptr; - dma_addr_t host_cmds_addr; - int ci; - - void *host_sg_tbl_ptr; - dma_addr_t host_sg_tbl_addr; - int sgi; - - u32 bier; - char trans_result; - - unsigned int card_inserted; - unsigned int card_removed; - unsigned int card_exist; - - struct delayed_work carddet_work; - struct delayed_work idle_work; - - spinlock_t lock; - struct mutex pcr_mutex; - struct completion *done; - struct completion *finish_me; - - unsigned int cur_clock; - bool ms_pmos; - bool remove_pci; - bool msi_en; - -#define EXTRA_CAPS_SD_SDR50 (1 << 0) -#define EXTRA_CAPS_SD_SDR104 (1 << 1) -#define EXTRA_CAPS_SD_DDR50 (1 << 2) -#define EXTRA_CAPS_MMC_HSDDR (1 << 3) -#define EXTRA_CAPS_MMC_HS200 (1 << 4) -#define EXTRA_CAPS_MMC_8BIT (1 << 5) - u32 extra_caps; - -#define IC_VER_A 0 -#define IC_VER_B 1 -#define IC_VER_C 2 -#define IC_VER_D 3 - u8 ic_version; - - const u32 *sd_pull_ctl_enable_tbl; - const u32 *sd_pull_ctl_disable_tbl; - const u32 *ms_pull_ctl_enable_tbl; - const u32 *ms_pull_ctl_disable_tbl; - - const struct pcr_ops *ops; - enum PDEV_STAT state; - - int num_slots; - struct rtsx_slot *slots; -}; - -#define CHK_PCI_PID(pcr, pid) ((pcr)->pci->device == (pid)) -#define PCI_VID(pcr) ((pcr)->pci->vendor) -#define PCI_PID(pcr) ((pcr)->pci->device) - -void rtsx_pci_start_run(struct rtsx_pcr *pcr); -int rtsx_pci_write_register(struct rtsx_pcr *pcr, u16 addr, u8 mask, u8 data); -int rtsx_pci_read_register(struct rtsx_pcr *pcr, u16 addr, u8 *data); -int rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 val); -int rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 *val); -void rtsx_pci_stop_cmd(struct rtsx_pcr *pcr); -void rtsx_pci_add_cmd(struct rtsx_pcr *pcr, - u8 cmd_type, u16 reg_addr, u8 mask, u8 data); -void rtsx_pci_send_cmd_no_wait(struct rtsx_pcr *pcr); -int rtsx_pci_send_cmd(struct rtsx_pcr *pcr, int timeout); -int rtsx_pci_transfer_data(struct rtsx_pcr *pcr, struct scatterlist *sglist, - int num_sg, bool read, int timeout); -int rtsx_pci_read_ppbuf(struct rtsx_pcr *pcr, u8 *buf, int buf_len); -int rtsx_pci_write_ppbuf(struct rtsx_pcr *pcr, u8 *buf, int buf_len); -int rtsx_pci_card_pull_ctl_enable(struct rtsx_pcr *pcr, int card); -int rtsx_pci_card_pull_ctl_disable(struct rtsx_pcr *pcr, int card); -int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock, - u8 ssc_depth, bool initial_mode, bool double_clk, bool vpclk); -int rtsx_pci_card_power_on(struct rtsx_pcr *pcr, int card); -int rtsx_pci_card_power_off(struct rtsx_pcr *pcr, int card); -int rtsx_pci_card_exclusive_check(struct rtsx_pcr *pcr, int card); -int rtsx_pci_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage); -unsigned int rtsx_pci_card_exist(struct rtsx_pcr *pcr); -void rtsx_pci_complete_unfinished_transfer(struct rtsx_pcr *pcr); - -static inline u8 *rtsx_pci_get_cmd_data(struct rtsx_pcr *pcr) -{ - return (u8 *)(pcr->host_cmds_ptr); -} - -#endif |