diff options
Diffstat (limited to 'include/linux/pinctrl/pinconf-generic.h')
| -rw-r--r-- | include/linux/pinctrl/pinconf-generic.h | 48 |
1 files changed, 37 insertions, 11 deletions
diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h index d74b7a4ea154..1be4032071c2 100644 --- a/include/linux/pinctrl/pinconf-generic.h +++ b/include/linux/pinctrl/pinconf-generic.h @@ -81,14 +81,20 @@ struct pinctrl_map; * @PIN_CONFIG_INPUT_SCHMITT_ENABLE: control schmitt-trigger mode on the pin. * If the argument != 0, schmitt-trigger mode is enabled. If it's 0, * schmitt-trigger mode is disabled. + * @PIN_CONFIG_INPUT_SCHMITT_UV: this will configure an input pin to run in + * schmitt-trigger mode. The argument is in uV. * @PIN_CONFIG_MODE_LOW_POWER: this will configure the pin for low power * operation, if several modes of operation are supported these can be * passed in the argument on a custom form, else just use argument 1 * to indicate low power mode, argument 0 turns low power mode off. * @PIN_CONFIG_MODE_PWM: this will configure the pin for PWM - * @PIN_CONFIG_OUTPUT: this will configure the pin as an output and drive a - * value on the line. Use argument 1 to indicate high level, argument 0 to - * indicate low level. (Please see Documentation/driver-api/pin-control.rst, + * @PIN_CONFIG_LEVEL: setting this will configure the pin as an output and + * drive a value on the line. Use argument 1 to indicate high level, + * argument 0 to indicate low level. Conversely the value of the line + * can be read using this parameter, if and only if that value can be + * represented as a binary 0 or 1 where 0 indicate a low voltage level + * and 1 indicate a high voltage level. + * (Please see Documentation/driver-api/pin-control.rst, * section "GPIO mode pitfalls" for a discussion around this parameter.) * @PIN_CONFIG_OUTPUT_ENABLE: this will enable the pin's output mode * without driving a value there. For most platforms this reduces to @@ -106,6 +112,12 @@ struct pinctrl_map; * or latch delay (on outputs) this parameter (in a custom format) * specifies the clock skew or latch delay. It typically controls how * many double inverters are put in front of the line. + * @PIN_CONFIG_SKEW_DELAY_INPUT_PS: if the pin has independent values for the + * programmable skew rate (on inputs) and latch delay (on outputs), then + * this parameter specifies the clock skew only. The argument is in ps. + * @PIN_CONFIG_SKEW_DELAY_OUPUT_PS: if the pin has independent values for the + * programmable skew rate (on inputs) and latch delay (on outputs), then + * this parameter specifies the latch delay only. The argument is in ps. * @PIN_CONFIG_SLEEP_HARDWARE_STATE: indicate this is sleep related state. * @PIN_CONFIG_SLEW_RATE: if the pin can select slew rate, the argument to * this parameter (on a custom format) tells the driver which alternative @@ -132,14 +144,17 @@ enum pin_config_param { PIN_CONFIG_INPUT_ENABLE, PIN_CONFIG_INPUT_SCHMITT, PIN_CONFIG_INPUT_SCHMITT_ENABLE, + PIN_CONFIG_INPUT_SCHMITT_UV, PIN_CONFIG_MODE_LOW_POWER, PIN_CONFIG_MODE_PWM, - PIN_CONFIG_OUTPUT, + PIN_CONFIG_LEVEL, PIN_CONFIG_OUTPUT_ENABLE, PIN_CONFIG_OUTPUT_IMPEDANCE_OHMS, PIN_CONFIG_PERSIST_STATE, PIN_CONFIG_POWER_SOURCE, PIN_CONFIG_SKEW_DELAY, + PIN_CONFIG_SKEW_DELAY_INPUT_PS, + PIN_CONFIG_SKEW_DELAY_OUTPUT_PS, PIN_CONFIG_SLEEP_HARDWARE_STATE, PIN_CONFIG_SLEW_RATE, PIN_CONFIG_END = 0x7F, @@ -174,36 +189,43 @@ static inline unsigned long pinconf_to_config_packed(enum pin_config_param param return PIN_CONF_PACKED(param, argument); } -#define PCONFDUMP(a, b, c, d) { \ - .param = a, .display = b, .format = c, .has_arg = d \ +#define PCONFDUMP_WITH_VALUES(a, b, c, d, e, f) { \ + .param = a, .display = b, .format = c, .has_arg = d, \ + .values = e, .num_values = f \ } +#define PCONFDUMP(a, b, c, d) PCONFDUMP_WITH_VALUES(a, b, c, d, NULL, 0) + struct pin_config_item { const enum pin_config_param param; const char * const display; const char * const format; bool has_arg; + const char * const *values; + size_t num_values; }; struct pinconf_generic_params { const char * const property; enum pin_config_param param; u32 default_value; + const char * const *values; + size_t num_values; }; int pinconf_generic_dt_subnode_to_map(struct pinctrl_dev *pctldev, struct device_node *np, struct pinctrl_map **map, - unsigned *reserved_maps, unsigned *num_maps, + unsigned int *reserved_maps, unsigned int *num_maps, enum pinctrl_map_type type); int pinconf_generic_dt_node_to_map(struct pinctrl_dev *pctldev, struct device_node *np_config, struct pinctrl_map **map, - unsigned *num_maps, enum pinctrl_map_type type); + unsigned int *num_maps, enum pinctrl_map_type type); void pinconf_generic_dt_free_map(struct pinctrl_dev *pctldev, - struct pinctrl_map *map, unsigned num_maps); + struct pinctrl_map *map, unsigned int num_maps); static inline int pinconf_generic_dt_node_to_map_group(struct pinctrl_dev *pctldev, struct device_node *np_config, struct pinctrl_map **map, - unsigned *num_maps) + unsigned int *num_maps) { return pinconf_generic_dt_node_to_map(pctldev, np_config, map, num_maps, PIN_MAP_TYPE_CONFIGS_GROUP); @@ -211,7 +233,7 @@ static inline int pinconf_generic_dt_node_to_map_group(struct pinctrl_dev *pctld static inline int pinconf_generic_dt_node_to_map_pin(struct pinctrl_dev *pctldev, struct device_node *np_config, struct pinctrl_map **map, - unsigned *num_maps) + unsigned int *num_maps) { return pinconf_generic_dt_node_to_map(pctldev, np_config, map, num_maps, PIN_MAP_TYPE_CONFIGS_PIN); @@ -229,4 +251,8 @@ static inline int pinconf_generic_dt_node_to_map_all(struct pinctrl_dev *pctldev PIN_MAP_TYPE_INVALID); } +int pinconf_generic_dt_node_to_map_pinmux(struct pinctrl_dev *pctldev, + struct device_node *np, + struct pinctrl_map **map, + unsigned int *num_maps); #endif /* __LINUX_PINCTRL_PINCONF_GENERIC_H */ |