diff options
Diffstat (limited to 'include/linux/platform_data')
278 files changed, 9759 insertions, 5788 deletions
diff --git a/include/linux/platform_data/ad5449.h b/include/linux/platform_data/ad5449.h deleted file mode 100644 index bd712bd4b94e..000000000000 --- a/include/linux/platform_data/ad5449.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * AD5415, AD5426, AD5429, AD5432, AD5439, AD5443, AD5449 Digital to Analog - * Converter driver. - * - * Copyright 2012 Analog Devices Inc. - * Author: Lars-Peter Clausen <lars@metafoo.de> - * - * Licensed under the GPL-2. - */ - -#ifndef __LINUX_PLATFORM_DATA_AD5449_H__ -#define __LINUX_PLATFORM_DATA_AD5449_H__ - -/** - * enum ad5449_sdo_mode - AD5449 SDO pin configuration - * @AD5449_SDO_DRIVE_FULL: Drive the SDO pin with full strength. - * @AD5449_SDO_DRIVE_WEAK: Drive the SDO pin with not full strength. - * @AD5449_SDO_OPEN_DRAIN: Operate the SDO pin in open-drain mode. - * @AD5449_SDO_DISABLED: Disable the SDO pin, in this mode it is not possible to - * read back from the device. - */ -enum ad5449_sdo_mode { - AD5449_SDO_DRIVE_FULL = 0x0, - AD5449_SDO_DRIVE_WEAK = 0x1, - AD5449_SDO_OPEN_DRAIN = 0x2, - AD5449_SDO_DISABLED = 0x3, -}; - -/** - * struct ad5449_platform_data - Platform data for the ad5449 DAC driver - * @sdo_mode: SDO pin mode - * @hardware_clear_to_midscale: Whether asserting the hardware CLR pin sets the - * outputs to midscale (true) or to zero scale(false). - */ -struct ad5449_platform_data { - enum ad5449_sdo_mode sdo_mode; - bool hardware_clear_to_midscale; -}; - -#endif diff --git a/include/linux/platform_data/ad5755.h b/include/linux/platform_data/ad5755.h deleted file mode 100644 index a5a1cb751874..000000000000 --- a/include/linux/platform_data/ad5755.h +++ /dev/null @@ -1,103 +0,0 @@ -/* - * Copyright 2012 Analog Devices Inc. - * - * Licensed under the GPL-2. - */ -#ifndef __LINUX_PLATFORM_DATA_AD5755_H__ -#define __LINUX_PLATFORM_DATA_AD5755_H__ - -enum ad5755_mode { - AD5755_MODE_VOLTAGE_0V_5V = 0, - AD5755_MODE_VOLTAGE_0V_10V = 1, - AD5755_MODE_VOLTAGE_PLUSMINUS_5V = 2, - AD5755_MODE_VOLTAGE_PLUSMINUS_10V = 3, - AD5755_MODE_CURRENT_4mA_20mA = 4, - AD5755_MODE_CURRENT_0mA_20mA = 5, - AD5755_MODE_CURRENT_0mA_24mA = 6, -}; - -enum ad5755_dc_dc_phase { - AD5755_DC_DC_PHASE_ALL_SAME_EDGE = 0, - AD5755_DC_DC_PHASE_A_B_SAME_EDGE_C_D_OPP_EDGE = 1, - AD5755_DC_DC_PHASE_A_C_SAME_EDGE_B_D_OPP_EDGE = 2, - AD5755_DC_DC_PHASE_90_DEGREE = 3, -}; - -enum ad5755_dc_dc_freq { - AD5755_DC_DC_FREQ_250kHZ = 0, - AD5755_DC_DC_FREQ_410kHZ = 1, - AD5755_DC_DC_FREQ_650kHZ = 2, -}; - -enum ad5755_dc_dc_maxv { - AD5755_DC_DC_MAXV_23V = 0, - AD5755_DC_DC_MAXV_24V5 = 1, - AD5755_DC_DC_MAXV_27V = 2, - AD5755_DC_DC_MAXV_29V5 = 3, -}; - -enum ad5755_slew_rate { - AD5755_SLEW_RATE_64k = 0, - AD5755_SLEW_RATE_32k = 1, - AD5755_SLEW_RATE_16k = 2, - AD5755_SLEW_RATE_8k = 3, - AD5755_SLEW_RATE_4k = 4, - AD5755_SLEW_RATE_2k = 5, - AD5755_SLEW_RATE_1k = 6, - AD5755_SLEW_RATE_500 = 7, - AD5755_SLEW_RATE_250 = 8, - AD5755_SLEW_RATE_125 = 9, - AD5755_SLEW_RATE_64 = 10, - AD5755_SLEW_RATE_32 = 11, - AD5755_SLEW_RATE_16 = 12, - AD5755_SLEW_RATE_8 = 13, - AD5755_SLEW_RATE_4 = 14, - AD5755_SLEW_RATE_0_5 = 15, -}; - -enum ad5755_slew_step_size { - AD5755_SLEW_STEP_SIZE_1 = 0, - AD5755_SLEW_STEP_SIZE_2 = 1, - AD5755_SLEW_STEP_SIZE_4 = 2, - AD5755_SLEW_STEP_SIZE_8 = 3, - AD5755_SLEW_STEP_SIZE_16 = 4, - AD5755_SLEW_STEP_SIZE_32 = 5, - AD5755_SLEW_STEP_SIZE_64 = 6, - AD5755_SLEW_STEP_SIZE_128 = 7, - AD5755_SLEW_STEP_SIZE_256 = 8, -}; - -/** - * struct ad5755_platform_data - AD5755 DAC driver platform data - * @ext_dc_dc_compenstation_resistor: Whether an external DC-DC converter - * compensation register is used. - * @dc_dc_phase: DC-DC converter phase. - * @dc_dc_freq: DC-DC converter frequency. - * @dc_dc_maxv: DC-DC maximum allowed boost voltage. - * @dac.mode: The mode to be used for the DAC output. - * @dac.ext_current_sense_resistor: Whether an external current sense resistor - * is used. - * @dac.enable_voltage_overrange: Whether to enable 20% voltage output overrange. - * @dac.slew.enable: Whether to enable digital slew. - * @dac.slew.rate: Slew rate of the digital slew. - * @dac.slew.step_size: Slew step size of the digital slew. - **/ -struct ad5755_platform_data { - bool ext_dc_dc_compenstation_resistor; - enum ad5755_dc_dc_phase dc_dc_phase; - enum ad5755_dc_dc_freq dc_dc_freq; - enum ad5755_dc_dc_maxv dc_dc_maxv; - - struct { - enum ad5755_mode mode; - bool ext_current_sense_resistor; - bool enable_voltage_overrange; - struct { - bool enable; - enum ad5755_slew_rate rate; - enum ad5755_slew_step_size step_size; - } slew; - } dac[4]; -}; - -#endif diff --git a/include/linux/platform_data/ad5761.h b/include/linux/platform_data/ad5761.h index 7bd8ed7d978e..69e261e2ca14 100644 --- a/include/linux/platform_data/ad5761.h +++ b/include/linux/platform_data/ad5761.h @@ -1,10 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * AD5721, AD5721R, AD5761, AD5761R, Voltage Output Digital to Analog Converter * * Copyright 2016 Qtechnology A/S - * 2016 Ricardo Ribalda <ricardo.ribalda@gmail.com> - * - * Licensed under the GPL-2. + * 2016 Ricardo Ribalda <ribalda@kernel.org> */ #ifndef __LINUX_PLATFORM_DATA_AD5761_H__ #define __LINUX_PLATFORM_DATA_AD5761_H__ diff --git a/include/linux/platform_data/ad7266.h b/include/linux/platform_data/ad7266.h index eabfdcb26992..f0652567afba 100644 --- a/include/linux/platform_data/ad7266.h +++ b/include/linux/platform_data/ad7266.h @@ -1,9 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * AD7266/65 SPI ADC driver * * Copyright 2012 Analog Devices Inc. - * - * Licensed under the GPL-2. */ #ifndef __IIO_ADC_AD7266_H__ @@ -41,14 +40,11 @@ enum ad7266_mode { * @range: Reference voltage range the device is configured for * @mode: Sample mode the device is configured for * @fixed_addr: Whether the address pins are hard-wired - * @addr_gpios: GPIOs used for controlling the address pins, only used if - * fixed_addr is set to false. */ struct ad7266_platform_data { enum ad7266_range range; enum ad7266_mode mode; bool fixed_addr; - unsigned int addr_gpios[3]; }; #endif diff --git a/include/linux/platform_data/ad7291.h b/include/linux/platform_data/ad7291.h deleted file mode 100644 index b1fd1530c9a5..000000000000 --- a/include/linux/platform_data/ad7291.h +++ /dev/null @@ -1,13 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __IIO_AD7291_H__ -#define __IIO_AD7291_H__ - -/** - * struct ad7291_platform_data - AD7291 platform data - * @use_external_ref: Whether to use an external or internal reference voltage - */ -struct ad7291_platform_data { - bool use_external_ref; -}; - -#endif diff --git a/include/linux/platform_data/ad7298.h b/include/linux/platform_data/ad7298.h deleted file mode 100644 index fbf8adf1363a..000000000000 --- a/include/linux/platform_data/ad7298.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * AD7298 SPI ADC driver - * - * Copyright 2011 Analog Devices Inc. - * - * Licensed under the GPL-2. - */ - -#ifndef __LINUX_PLATFORM_DATA_AD7298_H__ -#define __LINUX_PLATFORM_DATA_AD7298_H__ - -/** - * struct ad7298_platform_data - Platform data for the ad7298 ADC driver - * @ext_ref: Whether to use an external reference voltage. - **/ -struct ad7298_platform_data { - bool ext_ref; -}; - -#endif /* IIO_ADC_AD7298_H_ */ diff --git a/include/linux/platform_data/ad7303.h b/include/linux/platform_data/ad7303.h deleted file mode 100644 index de6a7a6b4bbf..000000000000 --- a/include/linux/platform_data/ad7303.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Analog Devices AD7303 DAC driver - * - * Copyright 2013 Analog Devices Inc. - * - * Licensed under the GPL-2. - */ - -#ifndef __IIO_ADC_AD7303_H__ -#define __IIO_ADC_AD7303_H__ - -/** - * struct ad7303_platform_data - AD7303 platform data - * @use_external_ref: If set to true use an external voltage reference connected - * to the REF pin, otherwise use the internal reference derived from Vdd. - */ -struct ad7303_platform_data { - bool use_external_ref; -}; - -#endif diff --git a/include/linux/platform_data/ad7793.h b/include/linux/platform_data/ad7793.h index 7ea6751aae6d..7c697e58f02a 100644 --- a/include/linux/platform_data/ad7793.h +++ b/include/linux/platform_data/ad7793.h @@ -1,9 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * AD7792/AD7793 SPI ADC driver * * Copyright 2011 Analog Devices Inc. - * - * Licensed under the GPL-2. */ #ifndef __LINUX_PLATFORM_DATA_AD7793_H__ #define __LINUX_PLATFORM_DATA_AD7793_H__ @@ -41,7 +40,7 @@ enum ad7793_bias_voltage { * enum ad7793_refsel - AD7793 reference voltage selection * @AD7793_REFSEL_REFIN1: External reference applied between REFIN1(+) * and REFIN1(-). - * @AD7793_REFSEL_REFIN2: External reference applied between REFIN2(+) and + * @AD7793_REFSEL_REFIN2: External reference applied between REFIN2(+) * and REFIN1(-). Only valid for AD7795/AD7796. * @AD7793_REFSEL_INTERNAL: Internal 1.17 V reference. */ diff --git a/include/linux/platform_data/ad7887.h b/include/linux/platform_data/ad7887.h index 1e06eac3174d..9b4dca6ae70b 100644 --- a/include/linux/platform_data/ad7887.h +++ b/include/linux/platform_data/ad7887.h @@ -1,9 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * AD7887 SPI ADC driver * * Copyright 2010 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. */ #ifndef IIO_ADC_AD7887_H_ #define IIO_ADC_AD7887_H_ @@ -14,13 +13,9 @@ * second input channel, and Vref is internally connected to Vdd. If set to * false the device is used in single channel mode and AIN1/Vref is used as * VREF input. - * @use_onchip_ref: Whether to use the onchip reference. If set to true the - * internal 2.5V reference is used. If set to false a external reference is - * used. */ struct ad7887_platform_data { bool en_dual; - bool use_onchip_ref; }; #endif /* IIO_ADC_AD7887_H_ */ diff --git a/include/linux/platform_data/adau17x1.h b/include/linux/platform_data/adau17x1.h index 9db1b905df24..27a39cc6faec 100644 --- a/include/linux/platform_data/adau17x1.h +++ b/include/linux/platform_data/adau17x1.h @@ -1,10 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Driver for ADAU1361/ADAU1461/ADAU1761/ADAU1961/ADAU1381/ADAU1781 codecs * * Copyright 2011-2014 Analog Devices Inc. * Author: Lars-Peter Clausen <lars@metafoo.de> - * - * Licensed under the GPL-2 or later. */ #ifndef __LINUX_PLATFORM_DATA_ADAU17X1_H__ diff --git a/include/linux/platform_data/adau1977.h b/include/linux/platform_data/adau1977.h deleted file mode 100644 index bed11d908f92..000000000000 --- a/include/linux/platform_data/adau1977.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * ADAU1977/ADAU1978/ADAU1979 driver - * - * Copyright 2014 Analog Devices Inc. - * Author: Lars-Peter Clausen <lars@metafoo.de> - * - * Licensed under the GPL-2. - */ - -#ifndef __LINUX_PLATFORM_DATA_ADAU1977_H__ -#define __LINUX_PLATFORM_DATA_ADAU1977_H__ - -/** - * enum adau1977_micbias - ADAU1977 MICBIAS pin voltage setting - * @ADAU1977_MICBIAS_5V0: MICBIAS is set to 5.0 V - * @ADAU1977_MICBIAS_5V5: MICBIAS is set to 5.5 V - * @ADAU1977_MICBIAS_6V0: MICBIAS is set to 6.0 V - * @ADAU1977_MICBIAS_6V5: MICBIAS is set to 6.5 V - * @ADAU1977_MICBIAS_7V0: MICBIAS is set to 7.0 V - * @ADAU1977_MICBIAS_7V5: MICBIAS is set to 7.5 V - * @ADAU1977_MICBIAS_8V0: MICBIAS is set to 8.0 V - * @ADAU1977_MICBIAS_8V5: MICBIAS is set to 8.5 V - * @ADAU1977_MICBIAS_9V0: MICBIAS is set to 9.0 V - */ -enum adau1977_micbias { - ADAU1977_MICBIAS_5V0 = 0x0, - ADAU1977_MICBIAS_5V5 = 0x1, - ADAU1977_MICBIAS_6V0 = 0x2, - ADAU1977_MICBIAS_6V5 = 0x3, - ADAU1977_MICBIAS_7V0 = 0x4, - ADAU1977_MICBIAS_7V5 = 0x5, - ADAU1977_MICBIAS_8V0 = 0x6, - ADAU1977_MICBIAS_8V5 = 0x7, - ADAU1977_MICBIAS_9V0 = 0x8, -}; - -/** - * struct adau1977_platform_data - Platform configuration data for the ADAU1977 - * @micbias: Specifies the voltage for the MICBIAS pin - */ -struct adau1977_platform_data { - enum adau1977_micbias micbias; -}; - -#endif diff --git a/include/linux/platform_data/adp5588.h b/include/linux/platform_data/adp5588.h deleted file mode 100644 index c2153049cfbd..000000000000 --- a/include/linux/platform_data/adp5588.h +++ /dev/null @@ -1,172 +0,0 @@ -/* - * Analog Devices ADP5588 I/O Expander and QWERTY Keypad Controller - * - * Copyright 2009-2010 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#ifndef _ADP5588_H -#define _ADP5588_H - -#define DEV_ID 0x00 /* Device ID */ -#define CFG 0x01 /* Configuration Register1 */ -#define INT_STAT 0x02 /* Interrupt Status Register */ -#define KEY_LCK_EC_STAT 0x03 /* Key Lock and Event Counter Register */ -#define Key_EVENTA 0x04 /* Key Event Register A */ -#define Key_EVENTB 0x05 /* Key Event Register B */ -#define Key_EVENTC 0x06 /* Key Event Register C */ -#define Key_EVENTD 0x07 /* Key Event Register D */ -#define Key_EVENTE 0x08 /* Key Event Register E */ -#define Key_EVENTF 0x09 /* Key Event Register F */ -#define Key_EVENTG 0x0A /* Key Event Register G */ -#define Key_EVENTH 0x0B /* Key Event Register H */ -#define Key_EVENTI 0x0C /* Key Event Register I */ -#define Key_EVENTJ 0x0D /* Key Event Register J */ -#define KP_LCK_TMR 0x0E /* Keypad Lock1 to Lock2 Timer */ -#define UNLOCK1 0x0F /* Unlock Key1 */ -#define UNLOCK2 0x10 /* Unlock Key2 */ -#define GPIO_INT_STAT1 0x11 /* GPIO Interrupt Status */ -#define GPIO_INT_STAT2 0x12 /* GPIO Interrupt Status */ -#define GPIO_INT_STAT3 0x13 /* GPIO Interrupt Status */ -#define GPIO_DAT_STAT1 0x14 /* GPIO Data Status, Read twice to clear */ -#define GPIO_DAT_STAT2 0x15 /* GPIO Data Status, Read twice to clear */ -#define GPIO_DAT_STAT3 0x16 /* GPIO Data Status, Read twice to clear */ -#define GPIO_DAT_OUT1 0x17 /* GPIO DATA OUT */ -#define GPIO_DAT_OUT2 0x18 /* GPIO DATA OUT */ -#define GPIO_DAT_OUT3 0x19 /* GPIO DATA OUT */ -#define GPIO_INT_EN1 0x1A /* GPIO Interrupt Enable */ -#define GPIO_INT_EN2 0x1B /* GPIO Interrupt Enable */ -#define GPIO_INT_EN3 0x1C /* GPIO Interrupt Enable */ -#define KP_GPIO1 0x1D /* Keypad or GPIO Selection */ -#define KP_GPIO2 0x1E /* Keypad or GPIO Selection */ -#define KP_GPIO3 0x1F /* Keypad or GPIO Selection */ -#define GPI_EM1 0x20 /* GPI Event Mode 1 */ -#define GPI_EM2 0x21 /* GPI Event Mode 2 */ -#define GPI_EM3 0x22 /* GPI Event Mode 3 */ -#define GPIO_DIR1 0x23 /* GPIO Data Direction */ -#define GPIO_DIR2 0x24 /* GPIO Data Direction */ -#define GPIO_DIR3 0x25 /* GPIO Data Direction */ -#define GPIO_INT_LVL1 0x26 /* GPIO Edge/Level Detect */ -#define GPIO_INT_LVL2 0x27 /* GPIO Edge/Level Detect */ -#define GPIO_INT_LVL3 0x28 /* GPIO Edge/Level Detect */ -#define Debounce_DIS1 0x29 /* Debounce Disable */ -#define Debounce_DIS2 0x2A /* Debounce Disable */ -#define Debounce_DIS3 0x2B /* Debounce Disable */ -#define GPIO_PULL1 0x2C /* GPIO Pull Disable */ -#define GPIO_PULL2 0x2D /* GPIO Pull Disable */ -#define GPIO_PULL3 0x2E /* GPIO Pull Disable */ -#define CMP_CFG_STAT 0x30 /* Comparator Configuration and Status Register */ -#define CMP_CONFG_SENS1 0x31 /* Sensor1 Comparator Configuration Register */ -#define CMP_CONFG_SENS2 0x32 /* L2 Light Sensor Reference Level, Output Falling for Sensor 1 */ -#define CMP1_LVL2_TRIP 0x33 /* L2 Light Sensor Hysteresis (Active when Output Rising) for Sensor 1 */ -#define CMP1_LVL2_HYS 0x34 /* L3 Light Sensor Reference Level, Output Falling For Sensor 1 */ -#define CMP1_LVL3_TRIP 0x35 /* L3 Light Sensor Hysteresis (Active when Output Rising) For Sensor 1 */ -#define CMP1_LVL3_HYS 0x36 /* Sensor 2 Comparator Configuration Register */ -#define CMP2_LVL2_TRIP 0x37 /* L2 Light Sensor Reference Level, Output Falling for Sensor 2 */ -#define CMP2_LVL2_HYS 0x38 /* L2 Light Sensor Hysteresis (Active when Output Rising) for Sensor 2 */ -#define CMP2_LVL3_TRIP 0x39 /* L3 Light Sensor Reference Level, Output Falling For Sensor 2 */ -#define CMP2_LVL3_HYS 0x3A /* L3 Light Sensor Hysteresis (Active when Output Rising) For Sensor 2 */ -#define CMP1_ADC_DAT_R1 0x3B /* Comparator 1 ADC data Register1 */ -#define CMP1_ADC_DAT_R2 0x3C /* Comparator 1 ADC data Register2 */ -#define CMP2_ADC_DAT_R1 0x3D /* Comparator 2 ADC data Register1 */ -#define CMP2_ADC_DAT_R2 0x3E /* Comparator 2 ADC data Register2 */ - -#define ADP5588_DEVICE_ID_MASK 0xF - - /* Configuration Register1 */ -#define ADP5588_AUTO_INC (1 << 7) -#define ADP5588_GPIEM_CFG (1 << 6) -#define ADP5588_OVR_FLOW_M (1 << 5) -#define ADP5588_INT_CFG (1 << 4) -#define ADP5588_OVR_FLOW_IEN (1 << 3) -#define ADP5588_K_LCK_IM (1 << 2) -#define ADP5588_GPI_IEN (1 << 1) -#define ADP5588_KE_IEN (1 << 0) - -/* Interrupt Status Register */ -#define ADP5588_CMP2_INT (1 << 5) -#define ADP5588_CMP1_INT (1 << 4) -#define ADP5588_OVR_FLOW_INT (1 << 3) -#define ADP5588_K_LCK_INT (1 << 2) -#define ADP5588_GPI_INT (1 << 1) -#define ADP5588_KE_INT (1 << 0) - -/* Key Lock and Event Counter Register */ -#define ADP5588_K_LCK_EN (1 << 6) -#define ADP5588_LCK21 0x30 -#define ADP5588_KEC 0xF - -#define ADP5588_MAXGPIO 18 -#define ADP5588_BANK(offs) ((offs) >> 3) -#define ADP5588_BIT(offs) (1u << ((offs) & 0x7)) - -/* Put one of these structures in i2c_board_info platform_data */ - -#define ADP5588_KEYMAPSIZE 80 - -#define GPI_PIN_ROW0 97 -#define GPI_PIN_ROW1 98 -#define GPI_PIN_ROW2 99 -#define GPI_PIN_ROW3 100 -#define GPI_PIN_ROW4 101 -#define GPI_PIN_ROW5 102 -#define GPI_PIN_ROW6 103 -#define GPI_PIN_ROW7 104 -#define GPI_PIN_COL0 105 -#define GPI_PIN_COL1 106 -#define GPI_PIN_COL2 107 -#define GPI_PIN_COL3 108 -#define GPI_PIN_COL4 109 -#define GPI_PIN_COL5 110 -#define GPI_PIN_COL6 111 -#define GPI_PIN_COL7 112 -#define GPI_PIN_COL8 113 -#define GPI_PIN_COL9 114 - -#define GPI_PIN_ROW_BASE GPI_PIN_ROW0 -#define GPI_PIN_ROW_END GPI_PIN_ROW7 -#define GPI_PIN_COL_BASE GPI_PIN_COL0 -#define GPI_PIN_COL_END GPI_PIN_COL9 - -#define GPI_PIN_BASE GPI_PIN_ROW_BASE -#define GPI_PIN_END GPI_PIN_COL_END - -#define ADP5588_GPIMAPSIZE_MAX (GPI_PIN_END - GPI_PIN_BASE + 1) - -struct adp5588_gpi_map { - unsigned short pin; - unsigned short sw_evt; -}; - -struct adp5588_kpad_platform_data { - int rows; /* Number of rows */ - int cols; /* Number of columns */ - const unsigned short *keymap; /* Pointer to keymap */ - unsigned short keymapsize; /* Keymap size */ - unsigned repeat:1; /* Enable key repeat */ - unsigned en_keylock:1; /* Enable Key Lock feature */ - unsigned short unlock_key1; /* Unlock Key 1 */ - unsigned short unlock_key2; /* Unlock Key 2 */ - const struct adp5588_gpi_map *gpimap; - unsigned short gpimapsize; - const struct adp5588_gpio_platform_data *gpio_data; -}; - -struct i2c_client; /* forward declaration */ - -struct adp5588_gpio_platform_data { - int gpio_start; /* GPIO Chip base # */ - const char *const *names; - unsigned irq_base; /* interrupt base # */ - unsigned pullup_dis_mask; /* Pull-Up Disable Mask */ - int (*setup)(struct i2c_client *client, - unsigned gpio, unsigned ngpio, - void *context); - int (*teardown)(struct i2c_client *client, - unsigned gpio, unsigned ngpio, - void *context); - void *context; -}; - -#endif diff --git a/include/linux/platform_data/adp8860.h b/include/linux/platform_data/adp8860.h index 0b4d39855c91..523c43740ec6 100644 --- a/include/linux/platform_data/adp8860.h +++ b/include/linux/platform_data/adp8860.h @@ -1,10 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Definitions and platform data for Analog Devices * Backlight drivers ADP8860 * * Copyright 2009-2010 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. */ #ifndef __LINUX_I2C_ADP8860_H diff --git a/include/linux/platform_data/adp8870.h b/include/linux/platform_data/adp8870.h index 624dceccbd5b..c5e55df2d809 100644 --- a/include/linux/platform_data/adp8870.h +++ b/include/linux/platform_data/adp8870.h @@ -1,10 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Definitions and platform data for Analog Devices * Backlight drivers ADP8870 * * Copyright 2009-2010 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. */ #ifndef __LINUX_I2C_ADP8870_H diff --git a/include/linux/platform_data/ads1015.h b/include/linux/platform_data/ads1015.h deleted file mode 100644 index d5aa2a045669..000000000000 --- a/include/linux/platform_data/ads1015.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Platform Data for ADS1015 12-bit 4-input ADC - * (C) Copyright 2010 - * Dirk Eibach, Guntermann & Drunck GmbH <eibach@gdsys.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef LINUX_ADS1015_H -#define LINUX_ADS1015_H - -#define ADS1015_CHANNELS 8 - -struct ads1015_channel_data { - bool enabled; - unsigned int pga; - unsigned int data_rate; -}; - -struct ads1015_platform_data { - struct ads1015_channel_data channel_data[ADS1015_CHANNELS]; -}; - -#endif /* LINUX_ADS1015_H */ diff --git a/include/linux/platform_data/ads7828.h b/include/linux/platform_data/ads7828.h index 3245f45f9d77..0fa4186c6171 100644 --- a/include/linux/platform_data/ads7828.h +++ b/include/linux/platform_data/ads7828.h @@ -1,14 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * TI ADS7828 A/D Converter platform data definition * * Copyright (c) 2012 Savoir-faire Linux Inc. * Vivien Didelot <vivien.didelot@savoirfairelinux.com> * - * For further information, see the Documentation/hwmon/ads7828 file. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * For further information, see the Documentation/hwmon/ads7828.rst file. */ #ifndef _PDATA_ADS7828_H diff --git a/include/linux/platform_data/amd_qdma.h b/include/linux/platform_data/amd_qdma.h new file mode 100644 index 000000000000..967a6ef31cf9 --- /dev/null +++ b/include/linux/platform_data/amd_qdma.h @@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2023-2024, Advanced Micro Devices, Inc. + */ + +#ifndef _PLATDATA_AMD_QDMA_H +#define _PLATDATA_AMD_QDMA_H + +#include <linux/dmaengine.h> + +/** + * struct qdma_queue_info - DMA queue information. This information is used to + * match queue when DMA channel is requested + * @dir: Channel transfer direction + */ +struct qdma_queue_info { + enum dma_transfer_direction dir; +}; + +#define QDMA_FILTER_PARAM(qinfo) ((void *)(qinfo)) + +struct dma_slave_map; + +/** + * struct qdma_platdata - Platform specific data for QDMA engine + * @max_mm_channels: Maximum number of MM DMA channels in each direction + * @device_map: DMA slave map + * @irq_index: The index of first IRQ + * @dma_dev: The device pointer for dma operations + */ +struct qdma_platdata { + u32 max_mm_channels; + u32 irq_index; + struct dma_slave_map *device_map; + struct device *dma_dev; +}; + +#endif /* _PLATDATA_AMD_QDMA_H */ diff --git a/include/linux/platform_data/amd_xdma.h b/include/linux/platform_data/amd_xdma.h new file mode 100644 index 000000000000..b5e23e14bac8 --- /dev/null +++ b/include/linux/platform_data/amd_xdma.h @@ -0,0 +1,34 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2022, Advanced Micro Devices, Inc. + */ + +#ifndef _PLATDATA_AMD_XDMA_H +#define _PLATDATA_AMD_XDMA_H + +#include <linux/dmaengine.h> + +/** + * struct xdma_chan_info - DMA channel information + * This information is used to match channel when request dma channel + * @dir: Channel transfer direction + */ +struct xdma_chan_info { + enum dma_transfer_direction dir; +}; + +#define XDMA_FILTER_PARAM(chan_info) ((void *)(chan_info)) + +struct dma_slave_map; + +/** + * struct xdma_platdata - platform specific data for XDMA engine + * @max_dma_channels: Maximum dma channels in each direction + */ +struct xdma_platdata { + u32 max_dma_channels; + u32 device_map_cnt; + struct dma_slave_map *device_map; +}; + +#endif /* _PLATDATA_AMD_XDMA_H */ diff --git a/include/linux/platform_data/apds990x.h b/include/linux/platform_data/apds990x.h index d186fcc5d257..94dfbaa365e1 100644 --- a/include/linux/platform_data/apds990x.h +++ b/include/linux/platform_data/apds990x.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * This file is part of the APDS990x sensor driver. * Chip is combined proximity and ambient light sensor. @@ -5,21 +6,6 @@ * Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies). * * Contact: Samu Onkalo <samu.p.onkalo@nokia.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * */ #ifndef __APDS990X_H__ diff --git a/include/linux/platform_data/arm-ux500-pm.h b/include/linux/platform_data/arm-ux500-pm.h index 8dff64b29ec0..9f6f01cfdd6c 100644 --- a/include/linux/platform_data/arm-ux500-pm.h +++ b/include/linux/platform_data/arm-ux500-pm.h @@ -1,10 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) ST-Ericsson SA 2010-2013 * Author: Rickard Andersson <rickard.andersson@stericsson.com> for * ST-Ericsson. * Author: Daniel Lezcano <daniel.lezcano@linaro.org> for Linaro. - * License terms: GNU General Public License (GPL) version 2 - * */ #ifndef ARM_UX500_PM_H diff --git a/include/linux/platform_data/asoc-mx27vis.h b/include/linux/platform_data/asoc-mx27vis.h deleted file mode 100644 index 2107d0d992dd..000000000000 --- a/include/linux/platform_data/asoc-mx27vis.h +++ /dev/null @@ -1,12 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __PLATFORM_DATA_ASOC_MX27VIS_H -#define __PLATFORM_DATA_ASOC_MX27VIS_H - -struct snd_mx27vis_platform_data { - int amp_gain0_gpio; - int amp_gain1_gpio; - int amp_mutel_gpio; - int amp_muter_gpio; -}; - -#endif /* __PLATFORM_DATA_ASOC_MX27VIS_H */ diff --git a/include/linux/platform_data/asoc-palm27x.h b/include/linux/platform_data/asoc-palm27x.h deleted file mode 100644 index 22b69a393a57..000000000000 --- a/include/linux/platform_data/asoc-palm27x.h +++ /dev/null @@ -1,9 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _INCLUDE_PALMASOC_H_ -#define _INCLUDE_PALMASOC_H_ - -struct palm27x_asoc_info { - int jack_gpio; -}; - -#endif diff --git a/include/linux/platform_data/asoc-pxa.h b/include/linux/platform_data/asoc-pxa.h new file mode 100644 index 000000000000..7b5b9e20fbf5 --- /dev/null +++ b/include/linux/platform_data/asoc-pxa.h @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __SOC_PXA_AUDIO_H__ +#define __SOC_PXA_AUDIO_H__ + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/ac97_codec.h> + +/* + * @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95) + * a -1 value means no gpio will be used for reset + * @codec_pdata: AC97 codec platform_data + + * reset_gpio should only be specified for pxa27x CPUs where a silicon + * bug prevents correct operation of the reset line. If not specified, + * the default behaviour on these CPUs is to consider gpio 113 as the + * AC97 reset line, which is the default on most boards. + */ +typedef struct { + int (*startup)(struct snd_pcm_substream *, void *); + void (*shutdown)(struct snd_pcm_substream *, void *); + void (*suspend)(void *); + void (*resume)(void *); + void *priv; + int reset_gpio; + void *codec_pdata[AC97_BUS_MAX_DEVICES]; +} pxa2xx_audio_ops_t; + +extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops); +extern void pxa27x_configure_ac97reset(int reset_gpio, bool to_gpio); + +#endif diff --git a/include/linux/platform_data/asoc-s3c.h b/include/linux/platform_data/asoc-s3c.h index 90641a5daaf0..085dd8e8af76 100644 --- a/include/linux/platform_data/asoc-s3c.h +++ b/include/linux/platform_data/asoc-s3c.h @@ -1,10 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (c) 2009 Samsung Electronics Co. Ltd * Author: Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* The machine init code calls s3c*_ac97_setup_gpio with @@ -16,8 +13,6 @@ #include <linux/dmaengine.h> -extern void s3c64xx_ac97_setup_gpio(int); - struct samsung_i2s_type { /* If the Primary DAI has 5.1 Channels */ #define QUIRK_PRI_6CHAN (1 << 0) diff --git a/include/linux/platform_data/asoc-s3c24xx_simtec.h b/include/linux/platform_data/asoc-s3c24xx_simtec.h deleted file mode 100644 index d220e54123aa..000000000000 --- a/include/linux/platform_data/asoc-s3c24xx_simtec.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Simtec Audio support. -*/ - -/** - * struct s3c24xx_audio_simtec_pdata - platform data for simtec audio - * @use_mpllin: Select codec clock from MPLLin - * @output_cdclk: Need to output CDCLK to the codec - * @have_mic: Set if we have a MIC socket - * @have_lout: Set if we have a LineOut socket - * @amp_gpio: GPIO pin to enable the AMP - * @amp_gain: Option GPIO to control AMP gain - */ -struct s3c24xx_audio_simtec_pdata { - unsigned int use_mpllin:1; - unsigned int output_cdclk:1; - - unsigned int have_mic:1; - unsigned int have_lout:1; - - int amp_gpio; - int amp_gain[2]; - - void (*startup)(void); -}; diff --git a/include/linux/platform_data/asoc-ti-mcbsp.h b/include/linux/platform_data/asoc-ti-mcbsp.h index e319d0a2ec82..cc8197760015 100644 --- a/include/linux/platform_data/asoc-ti-mcbsp.h +++ b/include/linux/platform_data/asoc-ti-mcbsp.h @@ -1,23 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Defines for Multi-Channel Buffered Serial Port * * Copyright (C) 2002 RidgeRun, Inc. * Author: Steve Johnson - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ #ifndef __ASOC_TI_MCBSP_H #define __ASOC_TI_MCBSP_H diff --git a/include/linux/platform_data/asoc-ux500-msp.h b/include/linux/platform_data/asoc-ux500-msp.h deleted file mode 100644 index 2f34bb98fe2a..000000000000 --- a/include/linux/platform_data/asoc-ux500-msp.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL), version 2. - */ - -#ifndef __MSP_H -#define __MSP_H - -#include <linux/platform_data/dma-ste-dma40.h> - -/* Platform data structure for a MSP I2S-device */ -struct msp_i2s_platform_data { - int id; - struct stedma40_chan_cfg *msp_i2s_dma_rx; - struct stedma40_chan_cfg *msp_i2s_dma_tx; -}; - -#endif diff --git a/include/linux/platform_data/at24.h b/include/linux/platform_data/at24.h deleted file mode 100644 index 63507ff464ee..000000000000 --- a/include/linux/platform_data/at24.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * at24.h - platform_data for the at24 (generic eeprom) driver - * (C) Copyright 2008 by Pengutronix - * (C) Copyright 2012 by Wolfram Sang - * same license as the driver - */ - -#ifndef _LINUX_AT24_H -#define _LINUX_AT24_H - -#include <linux/types.h> -#include <linux/nvmem-consumer.h> -#include <linux/bitops.h> - -/** - * struct at24_platform_data - data to set up at24 (generic eeprom) driver - * @byte_len: size of eeprom in byte - * @page_size: number of byte which can be written in one go - * @flags: tunable options, check AT24_FLAG_* defines - * @setup: an optional callback invoked after eeprom is probed; enables kernel - code to access eeprom via nvmem, see example - * @context: optional parameter passed to setup() - * - * If you set up a custom eeprom type, please double-check the parameters. - * Especially page_size needs extra care, as you risk data loss if your value - * is bigger than what the chip actually supports! - * - * An example in pseudo code for a setup() callback: - * - * void get_mac_addr(struct nvmem_device *nvmem, void *context) - * { - * u8 *mac_addr = ethernet_pdata->mac_addr; - * off_t offset = context; - * - * // Read MAC addr from EEPROM - * if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN) - * pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr); - * } - * - * This function pointer and context can now be set up in at24_platform_data. - */ - -struct at24_platform_data { - u32 byte_len; /* size (sum of all addr) */ - u16 page_size; /* for writes */ - u8 flags; -#define AT24_FLAG_ADDR16 BIT(7) /* address pointer is 16 bit */ -#define AT24_FLAG_READONLY BIT(6) /* sysfs-entry will be read-only */ -#define AT24_FLAG_IRUGO BIT(5) /* sysfs-entry will be world-readable */ -#define AT24_FLAG_TAKE8ADDR BIT(4) /* take always 8 addresses (24c00) */ -#define AT24_FLAG_SERIAL BIT(3) /* factory-programmed serial number */ -#define AT24_FLAG_MAC BIT(2) /* factory-programmed mac address */ -#define AT24_FLAG_NO_RDROL BIT(1) /* does not auto-rollover reads to */ - /* the next slave address */ - - void (*setup)(struct nvmem_device *nvmem, void *context); - void *context; -}; - -#endif /* _LINUX_AT24_H */ diff --git a/include/linux/platform_data/at91_adc.h b/include/linux/platform_data/at91_adc.h deleted file mode 100644 index 7819fc787731..000000000000 --- a/include/linux/platform_data/at91_adc.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * Copyright (C) 2011 Free Electrons - * - * Licensed under the GPLv2 or later. - */ - -#ifndef _AT91_ADC_H_ -#define _AT91_ADC_H_ - -enum atmel_adc_ts_type { - ATMEL_ADC_TOUCHSCREEN_NONE = 0, - ATMEL_ADC_TOUCHSCREEN_4WIRE = 4, - ATMEL_ADC_TOUCHSCREEN_5WIRE = 5, -}; - -/** - * struct at91_adc_trigger - description of triggers - * @name: name of the trigger advertised to the user - * @value: value to set in the ADC's trigger setup register - to enable the trigger - * @is_external: Does the trigger rely on an external pin? - */ -struct at91_adc_trigger { - const char *name; - u8 value; - bool is_external; -}; - -/** - * struct at91_adc_data - platform data for ADC driver - * @channels_used: channels in use on the board as a bitmask - * @startup_time: startup time of the ADC in microseconds - * @trigger_list: Triggers available in the ADC - * @trigger_number: Number of triggers available in the ADC - * @use_external_triggers: does the board has external triggers availables - * @vref: Reference voltage for the ADC in millivolts - * @touchscreen_type: If a touchscreen is connected, its type (4 or 5 wires) - */ -struct at91_adc_data { - unsigned long channels_used; - u8 startup_time; - struct at91_adc_trigger *trigger_list; - u8 trigger_number; - bool use_external_triggers; - u16 vref; - enum atmel_adc_ts_type touchscreen_type; -}; - -extern void __init at91_add_device_adc(struct at91_adc_data *data); -#endif diff --git a/include/linux/platform_data/ata-pxa.h b/include/linux/platform_data/ata-pxa.h index 6cf7df1d5830..0b65fd0aa509 100644 --- a/include/linux/platform_data/ata-pxa.h +++ b/include/linux/platform_data/ata-pxa.h @@ -1,21 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Generic PXA PATA driver * * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifndef __MACH_PATA_PXA_H__ diff --git a/include/linux/platform_data/ata-samsung_cf.h b/include/linux/platform_data/ata-samsung_cf.h deleted file mode 100644 index 748e71642c4a..000000000000 --- a/include/linux/platform_data/ata-samsung_cf.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Samsung CF-ATA platform_device info - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ATA_SAMSUNG_CF_H -#define __ATA_SAMSUNG_CF_H __FILE__ - -/** - * struct s3c_ide_platdata - S3C IDE driver platform data. - * @setup_gpio: Setup the external GPIO pins to the right state for data - * transfer in true-ide mode. - */ -struct s3c_ide_platdata { - void (*setup_gpio)(void); -}; - -/* - * s3c_ide_set_platdata() - Setup the platform specifc data for IDE driver. - * @pdata: Platform data for IDE driver. - */ -extern void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata); - -/* architecture-specific IDE configuration */ -extern void s3c64xx_ide_setup_gpio(void); -extern void s5pv210_ide_setup_gpio(void); - -#endif /*__ATA_SAMSUNG_CF_H */ diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h index cdceb4d4ef9d..73f63be509c4 100644 --- a/include/linux/platform_data/atmel.h +++ b/include/linux/platform_data/atmel.h @@ -1,24 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * atmel platform data - * - * GPL v2 Only */ #ifndef __ATMEL_H__ #define __ATMEL_H__ - /* Compact Flash */ -struct at91_cf_data { - int irq_pin; /* I/O IRQ */ - int det_pin; /* Card detect */ - int vcc_pin; /* power switching */ - int rst_pin; /* card reset */ - u8 chipselect; /* EBI Chip Select number */ - u8 flags; -#define AT91_CF_TRUE_IDE 0x01 -#define AT91_IDE_SWAP_A0_A2 0x02 -}; - /* FIXME: this needs a better location, but gets stuff building again */ #ifdef CONFIG_ATMEL_PM extern int at91_suspend_entering_slow_clock(void); diff --git a/include/linux/platform_data/b53.h b/include/linux/platform_data/b53.h index c3b61ead41f2..6f6fed2b171d 100644 --- a/include/linux/platform_data/b53.h +++ b/include/linux/platform_data/b53.h @@ -19,7 +19,7 @@ #ifndef __B53_H #define __B53_H -#include <linux/kernel.h> +#include <linux/types.h> #include <linux/platform_data/dsa.h> struct b53_platform_data { diff --git a/include/linux/platform_data/bcm7038_wdt.h b/include/linux/platform_data/bcm7038_wdt.h new file mode 100644 index 000000000000..e18cfd9ec8f9 --- /dev/null +++ b/include/linux/platform_data/bcm7038_wdt.h @@ -0,0 +1,8 @@ +#ifndef __BCM7038_WDT_PDATA_H +#define __BCM7038_WDT_PDATA_H + +struct bcm7038_wdt_platform_data { + const char *clk_name; +}; + +#endif /* __BCM7038_WDT_PDATA_H */ diff --git a/include/linux/platform_data/bcmgenet.h b/include/linux/platform_data/bcmgenet.h deleted file mode 100644 index d8f8738629d2..000000000000 --- a/include/linux/platform_data/bcmgenet.h +++ /dev/null @@ -1,19 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __LINUX_PLATFORM_DATA_BCMGENET_H__ -#define __LINUX_PLATFORM_DATA_BCMGENET_H__ - -#include <linux/types.h> -#include <linux/if_ether.h> -#include <linux/phy.h> - -struct bcmgenet_platform_data { - bool mdio_enabled; - phy_interface_t phy_interface; - int phy_address; - int phy_speed; - int phy_duplex; - u8 mac_address[ETH_ALEN]; - int genet_version; -}; - -#endif diff --git a/include/linux/platform_data/bd6107.h b/include/linux/platform_data/bd6107.h index 671d6502d241..596ca4f95cfa 100644 --- a/include/linux/platform_data/bd6107.h +++ b/include/linux/platform_data/bd6107.h @@ -1,9 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * bd6107.h - Rohm BD6107 LEDs Driver - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __BD6107_H__ #define __BD6107_H__ @@ -11,8 +8,7 @@ struct device; struct bd6107_platform_data { - struct device *fbdev; - int reset; /* Reset GPIO */ + struct device *dev; unsigned int def_value; }; diff --git a/include/linux/platform_data/bh1770glc.h b/include/linux/platform_data/bh1770glc.h index 8b5e2df36c72..cbb613915f0d 100644 --- a/include/linux/platform_data/bh1770glc.h +++ b/include/linux/platform_data/bh1770glc.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * This file is part of the ROHM BH1770GLC / OSRAM SFH7770 sensor driver. * Chip is combined proximity and ambient light sensor. @@ -5,21 +6,6 @@ * Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies). * * Contact: Samu Onkalo <samu.p.onkalo@nokia.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * */ #ifndef __BH1770_H__ diff --git a/include/linux/platform_data/brcmfmac.h b/include/linux/platform_data/brcmfmac.h index 1d30bf278231..ec99b7b73d1d 100644 --- a/include/linux/platform_data/brcmfmac.h +++ b/include/linux/platform_data/brcmfmac.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 201 Broadcom Corporation + * Copyright (c) 2016 Broadcom Corporation * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -125,7 +125,7 @@ struct brcmfmac_pd_cc_entry { */ struct brcmfmac_pd_cc { int table_size; - struct brcmfmac_pd_cc_entry table[0]; + struct brcmfmac_pd_cc_entry table[]; }; /** @@ -178,7 +178,7 @@ struct brcmfmac_platform_data { void (*power_off)(void); char *fw_alternative_path; int device_count; - struct brcmfmac_pd_device devices[0]; + struct brcmfmac_pd_device devices[]; }; diff --git a/include/linux/platform_data/brcmnand.h b/include/linux/platform_data/brcmnand.h new file mode 100644 index 000000000000..8b8777985dce --- /dev/null +++ b/include/linux/platform_data/brcmnand.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +#ifndef BRCMNAND_PLAT_DATA_H +#define BRCMNAND_PLAT_DATA_H + +struct brcmnand_platform_data { + int chip_select; + const char * const *part_probe_types; + unsigned int ecc_stepsize; + unsigned int ecc_strength; +}; + +#endif /* BRCMNAND_PLAT_DATA_H */ diff --git a/include/linux/platform_data/clk-davinci-pll.h b/include/linux/platform_data/clk-davinci-pll.h deleted file mode 100644 index e55dab1d578b..000000000000 --- a/include/linux/platform_data/clk-davinci-pll.h +++ /dev/null @@ -1,21 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * PLL clock driver for TI Davinci SoCs - * - * Copyright (C) 2018 David Lechner <david@lechnology.com> - */ - -#ifndef __LINUX_PLATFORM_DATA_CLK_DAVINCI_PLL_H__ -#define __LINUX_PLATFORM_DATA_CLK_DAVINCI_PLL_H__ - -#include <linux/regmap.h> - -/** - * davinci_pll_platform_data - * @cfgchip: CFGCHIP syscon regmap - */ -struct davinci_pll_platform_data { - struct regmap *cfgchip; -}; - -#endif /* __LINUX_PLATFORM_DATA_CLK_DAVINCI_PLL_H__ */ diff --git a/include/linux/platform_data/clk-st.h b/include/linux/platform_data/clk-fch.h index 7cdb6a402b35..11a2a23fd9b2 100644 --- a/include/linux/platform_data/clk-st.h +++ b/include/linux/platform_data/clk-fch.h @@ -1,17 +1,18 @@ /* SPDX-License-Identifier: MIT */ /* - * clock framework for AMD Stoney based clock + * clock framework for AMD misc clocks * * Copyright 2018 Advanced Micro Devices, Inc. */ -#ifndef __CLK_ST_H -#define __CLK_ST_H +#ifndef __CLK_FCH_H +#define __CLK_FCH_H #include <linux/compiler.h> -struct st_clk_data { +struct fch_clk_data { void __iomem *base; + char *name; }; -#endif /* __CLK_ST_H */ +#endif /* __CLK_FCH_H */ diff --git a/include/linux/platform_data/clk-integrator.h b/include/linux/platform_data/clk-integrator.h deleted file mode 100644 index addd48cac625..000000000000 --- a/include/linux/platform_data/clk-integrator.h +++ /dev/null @@ -1,2 +0,0 @@ -void integrator_impd1_clk_init(void __iomem *base, unsigned int id); -void integrator_impd1_clk_exit(unsigned int id); diff --git a/include/linux/platform_data/clk-u300.h b/include/linux/platform_data/clk-u300.h deleted file mode 100644 index 8429e73911a1..000000000000 --- a/include/linux/platform_data/clk-u300.h +++ /dev/null @@ -1 +0,0 @@ -void __init u300_clk_init(void __iomem *base); diff --git a/include/linux/platform_data/cpuidle-exynos.h b/include/linux/platform_data/cpuidle-exynos.h index bfa40e4c5d5f..075cbf0302a5 100644 --- a/include/linux/platform_data/cpuidle-exynos.h +++ b/include/linux/platform_data/cpuidle-exynos.h @@ -1,10 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (c) 2014 Samsung Electronics Co., Ltd. * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __CPUIDLE_EXYNOS_H diff --git a/include/linux/platform_data/cros_ec_chardev.h b/include/linux/platform_data/cros_ec_chardev.h new file mode 100644 index 000000000000..7de8faaf77df --- /dev/null +++ b/include/linux/platform_data/cros_ec_chardev.h @@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * ChromeOS EC device interface. + * + * Copyright (C) 2014 Google, Inc. + */ + +#ifndef _UAPI_LINUX_CROS_EC_DEV_H_ +#define _UAPI_LINUX_CROS_EC_DEV_H_ + +#include <linux/bits.h> +#include <linux/ioctl.h> +#include <linux/types.h> + +#include <linux/platform_data/cros_ec_commands.h> + +#define CROS_EC_DEV_VERSION "1.0.0" + +/** + * struct cros_ec_readmem - Struct used to read mapped memory. + * @offset: Within EC_LPC_ADDR_MEMMAP region. + * @bytes: Number of bytes to read. Zero means "read a string" (including '\0') + * At most only EC_MEMMAP_SIZE bytes can be read. + * @buffer: Where to store the result. The ioctl returns the number of bytes + * read or negative on error. + */ +struct cros_ec_readmem { + uint32_t offset; + uint32_t bytes; + uint8_t buffer[EC_MEMMAP_SIZE]; +}; + +#define CROS_EC_DEV_IOC 0xEC +#define CROS_EC_DEV_IOCXCMD _IOWR(CROS_EC_DEV_IOC, 0, struct cros_ec_command) +#define CROS_EC_DEV_IOCRDMEM _IOWR(CROS_EC_DEV_IOC, 1, struct cros_ec_readmem) +#define CROS_EC_DEV_IOCEVENTMASK _IO(CROS_EC_DEV_IOC, 2) + +#endif /* _CROS_EC_DEV_H_ */ diff --git a/include/linux/platform_data/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h new file mode 100644 index 000000000000..69294f79cc88 --- /dev/null +++ b/include/linux/platform_data/cros_ec_commands.h @@ -0,0 +1,6638 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Host communication command constants for ChromeOS EC + * + * Copyright (C) 2012 Google, Inc + * + * NOTE: This file is auto-generated from ChromeOS EC Open Source code from + * https://chromium.googlesource.com/chromiumos/platform/ec/+/master/include/ec_commands.h + */ + +/* Host communication command constants for Chrome EC */ + +#ifndef __CROS_EC_COMMANDS_H +#define __CROS_EC_COMMANDS_H + +#include <linux/bits.h> +#include <linux/types.h> + +#define BUILD_ASSERT(_cond) + +/* + * Current version of this protocol + * + * TODO(crosbug.com/p/11223): This is effectively useless; protocol is + * determined in other ways. Remove this once the kernel code no longer + * depends on it. + */ +#define EC_PROTO_VERSION 0x00000002 + +/* Command version mask */ +#define EC_VER_MASK(version) BIT(version) + +/* I/O addresses for ACPI commands */ +#define EC_LPC_ADDR_ACPI_DATA 0x62 +#define EC_LPC_ADDR_ACPI_CMD 0x66 + +/* I/O addresses for host command */ +#define EC_LPC_ADDR_HOST_DATA 0x200 +#define EC_LPC_ADDR_HOST_CMD 0x204 + +/* I/O addresses for host command args and params */ +/* Protocol version 2 */ +#define EC_LPC_ADDR_HOST_ARGS 0x800 /* And 0x801, 0x802, 0x803 */ +#define EC_LPC_ADDR_HOST_PARAM 0x804 /* For version 2 params; size is + * EC_PROTO2_MAX_PARAM_SIZE + */ +/* Protocol version 3 */ +#define EC_LPC_ADDR_HOST_PACKET 0x800 /* Offset of version 3 packet */ +#define EC_LPC_HOST_PACKET_SIZE 0x100 /* Max size of version 3 packet */ + +/* + * The actual block is 0x800-0x8ff, but some BIOSes think it's 0x880-0x8ff + * and they tell the kernel that so we have to think of it as two parts. + * + * Other BIOSes report only the I/O port region spanned by the Microchip + * MEC series EC; an attempt to address a larger region may fail. + */ +#define EC_HOST_CMD_REGION0 0x800 +#define EC_HOST_CMD_REGION1 0x880 +#define EC_HOST_CMD_REGION_SIZE 0x80 +#define EC_HOST_CMD_MEC_REGION_SIZE 0x8 + +/* EC command register bit functions */ +#define EC_LPC_CMDR_DATA BIT(0) /* Data ready for host to read */ +#define EC_LPC_CMDR_PENDING BIT(1) /* Write pending to EC */ +#define EC_LPC_CMDR_BUSY BIT(2) /* EC is busy processing a command */ +#define EC_LPC_CMDR_CMD BIT(3) /* Last host write was a command */ +#define EC_LPC_CMDR_ACPI_BRST BIT(4) /* Burst mode (not used) */ +#define EC_LPC_CMDR_SCI BIT(5) /* SCI event is pending */ +#define EC_LPC_CMDR_SMI BIT(6) /* SMI event is pending */ + +#define EC_LPC_ADDR_MEMMAP 0x900 +#define EC_MEMMAP_SIZE 255 /* ACPI IO buffer max is 255 bytes */ +#define EC_MEMMAP_TEXT_MAX 8 /* Size of a string in the memory map */ + +/* The offset address of each type of data in mapped memory. */ +#define EC_MEMMAP_TEMP_SENSOR 0x00 /* Temp sensors 0x00 - 0x0f */ +#define EC_MEMMAP_FAN 0x10 /* Fan speeds 0x10 - 0x17 */ +#define EC_MEMMAP_TEMP_SENSOR_B 0x18 /* More temp sensors 0x18 - 0x1f */ +#define EC_MEMMAP_ID 0x20 /* 0x20 == 'E', 0x21 == 'C' */ +#define EC_MEMMAP_ID_VERSION 0x22 /* Version of data in 0x20 - 0x2f */ +#define EC_MEMMAP_THERMAL_VERSION 0x23 /* Version of data in 0x00 - 0x1f */ +#define EC_MEMMAP_BATTERY_VERSION 0x24 /* Version of data in 0x40 - 0x7f */ +#define EC_MEMMAP_SWITCHES_VERSION 0x25 /* Version of data in 0x30 - 0x33 */ +#define EC_MEMMAP_EVENTS_VERSION 0x26 /* Version of data in 0x34 - 0x3f */ +#define EC_MEMMAP_HOST_CMD_FLAGS 0x27 /* Host cmd interface flags (8 bits) */ +/* Unused 0x28 - 0x2f */ +#define EC_MEMMAP_SWITCHES 0x30 /* 8 bits */ +/* Unused 0x31 - 0x33 */ +#define EC_MEMMAP_HOST_EVENTS 0x34 /* 64 bits */ +/* Battery values are all 32 bits, unless otherwise noted. */ +#define EC_MEMMAP_BATT_VOLT 0x40 /* Battery Present Voltage */ +#define EC_MEMMAP_BATT_RATE 0x44 /* Battery Present Rate */ +#define EC_MEMMAP_BATT_CAP 0x48 /* Battery Remaining Capacity */ +#define EC_MEMMAP_BATT_FLAG 0x4c /* Battery State, see below (8-bit) */ +#define EC_MEMMAP_BATT_COUNT 0x4d /* Battery Count (8-bit) */ +#define EC_MEMMAP_BATT_INDEX 0x4e /* Current Battery Data Index (8-bit) */ +/* Unused 0x4f */ +#define EC_MEMMAP_BATT_DCAP 0x50 /* Battery Design Capacity */ +#define EC_MEMMAP_BATT_DVLT 0x54 /* Battery Design Voltage */ +#define EC_MEMMAP_BATT_LFCC 0x58 /* Battery Last Full Charge Capacity */ +#define EC_MEMMAP_BATT_CCNT 0x5c /* Battery Cycle Count */ +/* Strings are all 8 bytes (EC_MEMMAP_TEXT_MAX) */ +#define EC_MEMMAP_BATT_MFGR 0x60 /* Battery Manufacturer String */ +#define EC_MEMMAP_BATT_MODEL 0x68 /* Battery Model Number String */ +#define EC_MEMMAP_BATT_SERIAL 0x70 /* Battery Serial Number String */ +#define EC_MEMMAP_BATT_TYPE 0x78 /* Battery Type String */ +#define EC_MEMMAP_ALS 0x80 /* ALS readings in lux (2 X 16 bits) */ +/* Unused 0x84 - 0x8f */ +#define EC_MEMMAP_ACC_STATUS 0x90 /* Accelerometer status (8 bits )*/ +/* Unused 0x91 */ +#define EC_MEMMAP_ACC_DATA 0x92 /* Accelerometers data 0x92 - 0x9f */ +/* 0x92: Lid Angle if available, LID_ANGLE_UNRELIABLE otherwise */ +/* 0x94 - 0x99: 1st Accelerometer */ +/* 0x9a - 0x9f: 2nd Accelerometer */ +#define EC_MEMMAP_GYRO_DATA 0xa0 /* Gyroscope data 0xa0 - 0xa5 */ +/* Unused 0xa6 - 0xdf */ + +/* + * ACPI is unable to access memory mapped data at or above this offset due to + * limitations of the ACPI protocol. Do not place data in the range 0xe0 - 0xfe + * which might be needed by ACPI. + */ +#define EC_MEMMAP_NO_ACPI 0xe0 + +/* Define the format of the accelerometer mapped memory status byte. */ +#define EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK 0x0f +#define EC_MEMMAP_ACC_STATUS_BUSY_BIT BIT(4) +#define EC_MEMMAP_ACC_STATUS_PRESENCE_BIT BIT(7) + +/* Number of temp sensors at EC_MEMMAP_TEMP_SENSOR */ +#define EC_TEMP_SENSOR_ENTRIES 16 +/* + * Number of temp sensors at EC_MEMMAP_TEMP_SENSOR_B. + * + * Valid only if EC_MEMMAP_THERMAL_VERSION returns >= 2. + */ +#define EC_TEMP_SENSOR_B_ENTRIES 8 + +/* Special values for mapped temperature sensors */ +#define EC_TEMP_SENSOR_NOT_PRESENT 0xff +#define EC_TEMP_SENSOR_ERROR 0xfe +#define EC_TEMP_SENSOR_NOT_POWERED 0xfd +#define EC_TEMP_SENSOR_NOT_CALIBRATED 0xfc +/* + * The offset of temperature value stored in mapped memory. This allows + * reporting a temperature range of 200K to 454K = -73C to 181C. + */ +#define EC_TEMP_SENSOR_OFFSET 200 + +/* + * Number of ALS readings at EC_MEMMAP_ALS + */ +#define EC_ALS_ENTRIES 2 + +/* + * The default value a temperature sensor will return when it is present but + * has not been read this boot. This is a reasonable number to avoid + * triggering alarms on the host. + */ +#define EC_TEMP_SENSOR_DEFAULT (296 - EC_TEMP_SENSOR_OFFSET) + +#define EC_FAN_SPEED_ENTRIES 4 /* Number of fans at EC_MEMMAP_FAN */ +#define EC_FAN_SPEED_NOT_PRESENT 0xffff /* Entry not present */ +#define EC_FAN_SPEED_STALLED 0xfffe /* Fan stalled */ + +/* Battery bit flags at EC_MEMMAP_BATT_FLAG. */ +#define EC_BATT_FLAG_AC_PRESENT 0x01 +#define EC_BATT_FLAG_BATT_PRESENT 0x02 +#define EC_BATT_FLAG_DISCHARGING 0x04 +#define EC_BATT_FLAG_CHARGING 0x08 +#define EC_BATT_FLAG_LEVEL_CRITICAL 0x10 +/* Set if some of the static/dynamic data is invalid (or outdated). */ +#define EC_BATT_FLAG_INVALID_DATA 0x20 + +/* Switch flags at EC_MEMMAP_SWITCHES */ +#define EC_SWITCH_LID_OPEN 0x01 +#define EC_SWITCH_POWER_BUTTON_PRESSED 0x02 +#define EC_SWITCH_WRITE_PROTECT_DISABLED 0x04 +/* Was recovery requested via keyboard; now unused. */ +#define EC_SWITCH_IGNORE1 0x08 +/* Recovery requested via dedicated signal (from servo board) */ +#define EC_SWITCH_DEDICATED_RECOVERY 0x10 +/* Was fake developer mode switch; now unused. Remove in next refactor. */ +#define EC_SWITCH_IGNORE0 0x20 + +/* Host command interface flags */ +/* Host command interface supports LPC args (LPC interface only) */ +#define EC_HOST_CMD_FLAG_LPC_ARGS_SUPPORTED 0x01 +/* Host command interface supports version 3 protocol */ +#define EC_HOST_CMD_FLAG_VERSION_3 0x02 + +/* Wireless switch flags */ +#define EC_WIRELESS_SWITCH_ALL ~0x00 /* All flags */ +#define EC_WIRELESS_SWITCH_WLAN 0x01 /* WLAN radio */ +#define EC_WIRELESS_SWITCH_BLUETOOTH 0x02 /* Bluetooth radio */ +#define EC_WIRELESS_SWITCH_WWAN 0x04 /* WWAN power */ +#define EC_WIRELESS_SWITCH_WLAN_POWER 0x08 /* WLAN power */ + +/*****************************************************************************/ +/* + * ACPI commands + * + * These are valid ONLY on the ACPI command/data port. + */ + +/* + * ACPI Read Embedded Controller + * + * This reads from ACPI memory space on the EC (EC_ACPI_MEM_*). + * + * Use the following sequence: + * + * - Write EC_CMD_ACPI_READ to EC_LPC_ADDR_ACPI_CMD + * - Wait for EC_LPC_CMDR_PENDING bit to clear + * - Write address to EC_LPC_ADDR_ACPI_DATA + * - Wait for EC_LPC_CMDR_DATA bit to set + * - Read value from EC_LPC_ADDR_ACPI_DATA + */ +#define EC_CMD_ACPI_READ 0x0080 + +/* + * ACPI Write Embedded Controller + * + * This reads from ACPI memory space on the EC (EC_ACPI_MEM_*). + * + * Use the following sequence: + * + * - Write EC_CMD_ACPI_WRITE to EC_LPC_ADDR_ACPI_CMD + * - Wait for EC_LPC_CMDR_PENDING bit to clear + * - Write address to EC_LPC_ADDR_ACPI_DATA + * - Wait for EC_LPC_CMDR_PENDING bit to clear + * - Write value to EC_LPC_ADDR_ACPI_DATA + */ +#define EC_CMD_ACPI_WRITE 0x0081 + +/* + * ACPI Burst Enable Embedded Controller + * + * This enables burst mode on the EC to allow the host to issue several + * commands back-to-back. While in this mode, writes to mapped multi-byte + * data are locked out to ensure data consistency. + */ +#define EC_CMD_ACPI_BURST_ENABLE 0x0082 + +/* + * ACPI Burst Disable Embedded Controller + * + * This disables burst mode on the EC and stops preventing EC writes to mapped + * multi-byte data. + */ +#define EC_CMD_ACPI_BURST_DISABLE 0x0083 + +/* + * ACPI Query Embedded Controller + * + * This clears the lowest-order bit in the currently pending host events, and + * sets the result code to the 1-based index of the bit (event 0x00000001 = 1, + * event 0x80000000 = 32), or 0 if no event was pending. + */ +#define EC_CMD_ACPI_QUERY_EVENT 0x0084 + +/* Valid addresses in ACPI memory space, for read/write commands */ + +/* Memory space version; set to EC_ACPI_MEM_VERSION_CURRENT */ +#define EC_ACPI_MEM_VERSION 0x00 +/* + * Test location; writing value here updates test compliment byte to (0xff - + * value). + */ +#define EC_ACPI_MEM_TEST 0x01 +/* Test compliment; writes here are ignored. */ +#define EC_ACPI_MEM_TEST_COMPLIMENT 0x02 + +/* Keyboard backlight brightness percent (0 - 100) */ +#define EC_ACPI_MEM_KEYBOARD_BACKLIGHT 0x03 +/* DPTF Target Fan Duty (0-100, 0xff for auto/none) */ +#define EC_ACPI_MEM_FAN_DUTY 0x04 + +/* + * DPTF temp thresholds. Any of the EC's temp sensors can have up to two + * independent thresholds attached to them. The current value of the ID + * register determines which sensor is affected by the THRESHOLD and COMMIT + * registers. The THRESHOLD register uses the same EC_TEMP_SENSOR_OFFSET scheme + * as the memory-mapped sensors. The COMMIT register applies those settings. + * + * The spec does not mandate any way to read back the threshold settings + * themselves, but when a threshold is crossed the AP needs a way to determine + * which sensor(s) are responsible. Each reading of the ID register clears and + * returns one sensor ID that has crossed one of its threshold (in either + * direction) since the last read. A value of 0xFF means "no new thresholds + * have tripped". Setting or enabling the thresholds for a sensor will clear + * the unread event count for that sensor. + */ +#define EC_ACPI_MEM_TEMP_ID 0x05 +#define EC_ACPI_MEM_TEMP_THRESHOLD 0x06 +#define EC_ACPI_MEM_TEMP_COMMIT 0x07 +/* + * Here are the bits for the COMMIT register: + * bit 0 selects the threshold index for the chosen sensor (0/1) + * bit 1 enables/disables the selected threshold (0 = off, 1 = on) + * Each write to the commit register affects one threshold. + */ +#define EC_ACPI_MEM_TEMP_COMMIT_SELECT_MASK BIT(0) +#define EC_ACPI_MEM_TEMP_COMMIT_ENABLE_MASK BIT(1) +/* + * Example: + * + * Set the thresholds for sensor 2 to 50 C and 60 C: + * write 2 to [0x05] -- select temp sensor 2 + * write 0x7b to [0x06] -- C_TO_K(50) - EC_TEMP_SENSOR_OFFSET + * write 0x2 to [0x07] -- enable threshold 0 with this value + * write 0x85 to [0x06] -- C_TO_K(60) - EC_TEMP_SENSOR_OFFSET + * write 0x3 to [0x07] -- enable threshold 1 with this value + * + * Disable the 60 C threshold, leaving the 50 C threshold unchanged: + * write 2 to [0x05] -- select temp sensor 2 + * write 0x1 to [0x07] -- disable threshold 1 + */ + +/* DPTF battery charging current limit */ +#define EC_ACPI_MEM_CHARGING_LIMIT 0x08 + +/* Charging limit is specified in 64 mA steps */ +#define EC_ACPI_MEM_CHARGING_LIMIT_STEP_MA 64 +/* Value to disable DPTF battery charging limit */ +#define EC_ACPI_MEM_CHARGING_LIMIT_DISABLED 0xff + +/* + * Report device orientation + * Bits Definition + * 3:1 Device DPTF Profile Number (DDPN) + * 0 = Reserved for backward compatibility (indicates no valid + * profile number. Host should fall back to using TBMD). + * 1..7 = DPTF Profile number to indicate to host which table needs + * to be loaded. + * 0 Tablet Mode Device Indicator (TBMD) + */ +#define EC_ACPI_MEM_DEVICE_ORIENTATION 0x09 +#define EC_ACPI_MEM_TBMD_SHIFT 0 +#define EC_ACPI_MEM_TBMD_MASK 0x1 +#define EC_ACPI_MEM_DDPN_SHIFT 1 +#define EC_ACPI_MEM_DDPN_MASK 0x7 + +/* + * Report device features. Uses the same format as the host command, except: + * + * bit 0 (EC_FEATURE_LIMITED) changes meaning from "EC code has a limited set + * of features", which is of limited interest when the system is already + * interpreting ACPI bytecode, to "EC_FEATURES[0-7] is not supported". Since + * these are supported, it defaults to 0. + * This allows detecting the presence of this field since older versions of + * the EC codebase would simply return 0xff to that unknown address. Check + * FEATURES0 != 0xff (or FEATURES0[0] == 0) to make sure that the other bits + * are valid. + */ +#define EC_ACPI_MEM_DEVICE_FEATURES0 0x0a +#define EC_ACPI_MEM_DEVICE_FEATURES1 0x0b +#define EC_ACPI_MEM_DEVICE_FEATURES2 0x0c +#define EC_ACPI_MEM_DEVICE_FEATURES3 0x0d +#define EC_ACPI_MEM_DEVICE_FEATURES4 0x0e +#define EC_ACPI_MEM_DEVICE_FEATURES5 0x0f +#define EC_ACPI_MEM_DEVICE_FEATURES6 0x10 +#define EC_ACPI_MEM_DEVICE_FEATURES7 0x11 + +#define EC_ACPI_MEM_BATTERY_INDEX 0x12 + +/* + * USB Port Power. Each bit indicates whether the corresponding USB ports' power + * is enabled (1) or disabled (0). + * bit 0 USB port ID 0 + * ... + * bit 7 USB port ID 7 + */ +#define EC_ACPI_MEM_USB_PORT_POWER 0x13 + +/* + * ACPI addresses 0x20 - 0xff map to EC_MEMMAP offset 0x00 - 0xdf. This data + * is read-only from the AP. Added in EC_ACPI_MEM_VERSION 2. + */ +#define EC_ACPI_MEM_MAPPED_BEGIN 0x20 +#define EC_ACPI_MEM_MAPPED_SIZE 0xe0 + +/* Current version of ACPI memory address space */ +#define EC_ACPI_MEM_VERSION_CURRENT 2 + + +/* + * This header file is used in coreboot both in C and ACPI code. The ACPI code + * is pre-processed to handle constants but the ASL compiler is unable to + * handle actual C code so keep it separate. + */ + + +/* + * Attributes for EC request and response packets. Just defining __packed + * results in inefficient assembly code on ARM, if the structure is actually + * 32-bit aligned, as it should be for all buffers. + * + * Be very careful when adding these to existing structures. They will round + * up the structure size to the specified boundary. + * + * Also be very careful to make that if a structure is included in some other + * parent structure that the alignment will still be true given the packing of + * the parent structure. This is particularly important if the sub-structure + * will be passed as a pointer to another function, since that function will + * not know about the misaligment caused by the parent structure's packing. + * + * Also be very careful using __packed - particularly when nesting non-packed + * structures inside packed ones. In fact, DO NOT use __packed directly; + * always use one of these attributes. + * + * Once everything is annotated properly, the following search strings should + * not return ANY matches in this file other than right here: + * + * "__packed" - generates inefficient code; all sub-structs must also be packed + * + * "struct [^_]" - all structs should be annotated, except for structs that are + * members of other structs/unions (and their original declarations should be + * annotated). + */ + +/* + * Packed structures make no assumption about alignment, so they do inefficient + * byte-wise reads. + */ +#define __ec_align1 __packed +#define __ec_align2 __packed +#define __ec_align4 __packed +#define __ec_align_size1 __packed +#define __ec_align_offset1 __packed +#define __ec_align_offset2 __packed +#define __ec_todo_packed __packed +#define __ec_todo_unpacked + + +/* LPC command status byte masks */ +/* EC has written a byte in the data register and host hasn't read it yet */ +#define EC_LPC_STATUS_TO_HOST 0x01 +/* Host has written a command/data byte and the EC hasn't read it yet */ +#define EC_LPC_STATUS_FROM_HOST 0x02 +/* EC is processing a command */ +#define EC_LPC_STATUS_PROCESSING 0x04 +/* Last write to EC was a command, not data */ +#define EC_LPC_STATUS_LAST_CMD 0x08 +/* EC is in burst mode */ +#define EC_LPC_STATUS_BURST_MODE 0x10 +/* SCI event is pending (requesting SCI query) */ +#define EC_LPC_STATUS_SCI_PENDING 0x20 +/* SMI event is pending (requesting SMI query) */ +#define EC_LPC_STATUS_SMI_PENDING 0x40 +/* (reserved) */ +#define EC_LPC_STATUS_RESERVED 0x80 + +/* + * EC is busy. This covers both the EC processing a command, and the host has + * written a new command but the EC hasn't picked it up yet. + */ +#define EC_LPC_STATUS_BUSY_MASK \ + (EC_LPC_STATUS_FROM_HOST | EC_LPC_STATUS_PROCESSING) + +/* + * Host command response codes (16-bit). Note that response codes should be + * stored in a uint16_t rather than directly in a value of this type. + */ +enum ec_status { + EC_RES_SUCCESS = 0, + EC_RES_INVALID_COMMAND = 1, + EC_RES_ERROR = 2, + EC_RES_INVALID_PARAM = 3, + EC_RES_ACCESS_DENIED = 4, + EC_RES_INVALID_RESPONSE = 5, + EC_RES_INVALID_VERSION = 6, + EC_RES_INVALID_CHECKSUM = 7, + EC_RES_IN_PROGRESS = 8, /* Accepted, command in progress */ + EC_RES_UNAVAILABLE = 9, /* No response available */ + EC_RES_TIMEOUT = 10, /* We got a timeout */ + EC_RES_OVERFLOW = 11, /* Table / data overflow */ + EC_RES_INVALID_HEADER = 12, /* Header contains invalid data */ + EC_RES_REQUEST_TRUNCATED = 13, /* Didn't get the entire request */ + EC_RES_RESPONSE_TOO_BIG = 14, /* Response was too big to handle */ + EC_RES_BUS_ERROR = 15, /* Communications bus error */ + EC_RES_BUSY = 16, /* Up but too busy. Should retry */ + EC_RES_INVALID_HEADER_VERSION = 17, /* Header version invalid */ + EC_RES_INVALID_HEADER_CRC = 18, /* Header CRC invalid */ + EC_RES_INVALID_DATA_CRC = 19, /* Data CRC invalid */ + EC_RES_DUP_UNAVAILABLE = 20, /* Can't resend response */ +}; + +/* + * Host event codes. Note these are 1-based, not 0-based, because ACPI query + * EC command uses code 0 to mean "no event pending". We explicitly specify + * each value in the enum listing so they won't change if we delete/insert an + * item or rearrange the list (it needs to be stable across platforms, not + * just within a single compiled instance). + */ +enum host_event_code { + EC_HOST_EVENT_LID_CLOSED = 1, + EC_HOST_EVENT_LID_OPEN = 2, + EC_HOST_EVENT_POWER_BUTTON = 3, + EC_HOST_EVENT_AC_CONNECTED = 4, + EC_HOST_EVENT_AC_DISCONNECTED = 5, + EC_HOST_EVENT_BATTERY_LOW = 6, + EC_HOST_EVENT_BATTERY_CRITICAL = 7, + EC_HOST_EVENT_BATTERY = 8, + EC_HOST_EVENT_THERMAL_THRESHOLD = 9, + /* Event generated by a device attached to the EC */ + EC_HOST_EVENT_DEVICE = 10, + EC_HOST_EVENT_THERMAL = 11, + EC_HOST_EVENT_USB_CHARGER = 12, + EC_HOST_EVENT_KEY_PRESSED = 13, + /* + * EC has finished initializing the host interface. The host can check + * for this event following sending a EC_CMD_REBOOT_EC command to + * determine when the EC is ready to accept subsequent commands. + */ + EC_HOST_EVENT_INTERFACE_READY = 14, + /* Keyboard recovery combo has been pressed */ + EC_HOST_EVENT_KEYBOARD_RECOVERY = 15, + + /* Shutdown due to thermal overload */ + EC_HOST_EVENT_THERMAL_SHUTDOWN = 16, + /* Shutdown due to battery level too low */ + EC_HOST_EVENT_BATTERY_SHUTDOWN = 17, + + /* Suggest that the AP throttle itself */ + EC_HOST_EVENT_THROTTLE_START = 18, + /* Suggest that the AP resume normal speed */ + EC_HOST_EVENT_THROTTLE_STOP = 19, + + /* Hang detect logic detected a hang and host event timeout expired */ + EC_HOST_EVENT_HANG_DETECT = 20, + /* Hang detect logic detected a hang and warm rebooted the AP */ + EC_HOST_EVENT_HANG_REBOOT = 21, + + /* PD MCU triggering host event */ + EC_HOST_EVENT_PD_MCU = 22, + + /* Battery Status flags have changed */ + EC_HOST_EVENT_BATTERY_STATUS = 23, + + /* EC encountered a panic, triggering a reset */ + EC_HOST_EVENT_PANIC = 24, + + /* Keyboard fastboot combo has been pressed */ + EC_HOST_EVENT_KEYBOARD_FASTBOOT = 25, + + /* EC RTC event occurred */ + EC_HOST_EVENT_RTC = 26, + + /* Emulate MKBP event */ + EC_HOST_EVENT_MKBP = 27, + + /* EC desires to change state of host-controlled USB mux */ + EC_HOST_EVENT_USB_MUX = 28, + + /* TABLET/LAPTOP mode or detachable base attach/detach event */ + EC_HOST_EVENT_MODE_CHANGE = 29, + + /* Keyboard recovery combo with hardware reinitialization */ + EC_HOST_EVENT_KEYBOARD_RECOVERY_HW_REINIT = 30, + + /* WoV */ + EC_HOST_EVENT_WOV = 31, + + /* + * The high bit of the event mask is not used as a host event code. If + * it reads back as set, then the entire event mask should be + * considered invalid by the host. This can happen when reading the + * raw event status via EC_MEMMAP_HOST_EVENTS but the LPC interface is + * not initialized on the EC, or improperly configured on the host. + */ + EC_HOST_EVENT_INVALID = 32 +}; +/* Host event mask */ +#define EC_HOST_EVENT_MASK(event_code) BIT_ULL((event_code) - 1) + +/** + * struct ec_lpc_host_args - Arguments at EC_LPC_ADDR_HOST_ARGS + * @flags: The host argument flags. + * @command_version: Command version. + * @data_size: The length of data. + * @checksum: Checksum; sum of command + flags + command_version + data_size + + * all params/response data bytes. + */ +struct ec_lpc_host_args { + uint8_t flags; + uint8_t command_version; + uint8_t data_size; + uint8_t checksum; +} __ec_align4; + +/* Flags for ec_lpc_host_args.flags */ +/* + * Args are from host. Data area at EC_LPC_ADDR_HOST_PARAM contains command + * params. + * + * If EC gets a command and this flag is not set, this is an old-style command. + * Command version is 0 and params from host are at EC_LPC_ADDR_OLD_PARAM with + * unknown length. EC must respond with an old-style response (that is, + * without setting EC_HOST_ARGS_FLAG_TO_HOST). + */ +#define EC_HOST_ARGS_FLAG_FROM_HOST 0x01 +/* + * Args are from EC. Data area at EC_LPC_ADDR_HOST_PARAM contains response. + * + * If EC responds to a command and this flag is not set, this is an old-style + * response. Command version is 0 and response data from EC is at + * EC_LPC_ADDR_OLD_PARAM with unknown length. + */ +#define EC_HOST_ARGS_FLAG_TO_HOST 0x02 + +/*****************************************************************************/ +/* + * Byte codes returned by EC over SPI interface. + * + * These can be used by the AP to debug the EC interface, and to determine + * when the EC is not in a state where it will ever get around to responding + * to the AP. + * + * Example of sequence of bytes read from EC for a current good transfer: + * 1. - - AP asserts chip select (CS#) + * 2. EC_SPI_OLD_READY - AP sends first byte(s) of request + * 3. - - EC starts handling CS# interrupt + * 4. EC_SPI_RECEIVING - AP sends remaining byte(s) of request + * 5. EC_SPI_PROCESSING - EC starts processing request; AP is clocking in + * bytes looking for EC_SPI_FRAME_START + * 6. - - EC finishes processing and sets up response + * 7. EC_SPI_FRAME_START - AP reads frame byte + * 8. (response packet) - AP reads response packet + * 9. EC_SPI_PAST_END - Any additional bytes read by AP + * 10 - - AP deasserts chip select + * 11 - - EC processes CS# interrupt and sets up DMA for + * next request + * + * If the AP is waiting for EC_SPI_FRAME_START and sees any value other than + * the following byte values: + * EC_SPI_OLD_READY + * EC_SPI_RX_READY + * EC_SPI_RECEIVING + * EC_SPI_PROCESSING + * + * Then the EC found an error in the request, or was not ready for the request + * and lost data. The AP should give up waiting for EC_SPI_FRAME_START, + * because the EC is unable to tell when the AP is done sending its request. + */ + +/* + * Framing byte which precedes a response packet from the EC. After sending a + * request, the AP will clock in bytes until it sees the framing byte, then + * clock in the response packet. + */ +#define EC_SPI_FRAME_START 0xec + +/* + * Padding bytes which are clocked out after the end of a response packet. + */ +#define EC_SPI_PAST_END 0xed + +/* + * EC is ready to receive, and has ignored the byte sent by the AP. EC expects + * that the AP will send a valid packet header (starting with + * EC_COMMAND_PROTOCOL_3) in the next 32 bytes. + */ +#define EC_SPI_RX_READY 0xf8 + +/* + * EC has started receiving the request from the AP, but hasn't started + * processing it yet. + */ +#define EC_SPI_RECEIVING 0xf9 + +/* EC has received the entire request from the AP and is processing it. */ +#define EC_SPI_PROCESSING 0xfa + +/* + * EC received bad data from the AP, such as a packet header with an invalid + * length. EC will ignore all data until chip select deasserts. + */ +#define EC_SPI_RX_BAD_DATA 0xfb + +/* + * EC received data from the AP before it was ready. That is, the AP asserted + * chip select and started clocking data before the EC was ready to receive it. + * EC will ignore all data until chip select deasserts. + */ +#define EC_SPI_NOT_READY 0xfc + +/* + * EC was ready to receive a request from the AP. EC has treated the byte sent + * by the AP as part of a request packet, or (for old-style ECs) is processing + * a fully received packet but is not ready to respond yet. + */ +#define EC_SPI_OLD_READY 0xfd + +/*****************************************************************************/ + +/* + * Protocol version 2 for I2C and SPI send a request this way: + * + * 0 EC_CMD_VERSION0 + (command version) + * 1 Command number + * 2 Length of params = N + * 3..N+2 Params, if any + * N+3 8-bit checksum of bytes 0..N+2 + * + * The corresponding response is: + * + * 0 Result code (EC_RES_*) + * 1 Length of params = M + * 2..M+1 Params, if any + * M+2 8-bit checksum of bytes 0..M+1 + */ +#define EC_PROTO2_REQUEST_HEADER_BYTES 3 +#define EC_PROTO2_REQUEST_TRAILER_BYTES 1 +#define EC_PROTO2_REQUEST_OVERHEAD (EC_PROTO2_REQUEST_HEADER_BYTES + \ + EC_PROTO2_REQUEST_TRAILER_BYTES) + +#define EC_PROTO2_RESPONSE_HEADER_BYTES 2 +#define EC_PROTO2_RESPONSE_TRAILER_BYTES 1 +#define EC_PROTO2_RESPONSE_OVERHEAD (EC_PROTO2_RESPONSE_HEADER_BYTES + \ + EC_PROTO2_RESPONSE_TRAILER_BYTES) + +/* Parameter length was limited by the LPC interface */ +#define EC_PROTO2_MAX_PARAM_SIZE 0xfc + +/* Maximum request and response packet sizes for protocol version 2 */ +#define EC_PROTO2_MAX_REQUEST_SIZE (EC_PROTO2_REQUEST_OVERHEAD + \ + EC_PROTO2_MAX_PARAM_SIZE) +#define EC_PROTO2_MAX_RESPONSE_SIZE (EC_PROTO2_RESPONSE_OVERHEAD + \ + EC_PROTO2_MAX_PARAM_SIZE) + +/*****************************************************************************/ + +/* + * Value written to legacy command port / prefix byte to indicate protocol + * 3+ structs are being used. Usage is bus-dependent. + */ +#define EC_COMMAND_PROTOCOL_3 0xda + +#define EC_HOST_REQUEST_VERSION 3 + +/** + * struct ec_host_request - Version 3 request from host. + * @struct_version: Should be 3. The EC will return EC_RES_INVALID_HEADER if it + * receives a header with a version it doesn't know how to + * parse. + * @checksum: Checksum of request and data; sum of all bytes including checksum + * should total to 0. + * @command: Command to send (EC_CMD_...) + * @command_version: Command version. + * @reserved: Unused byte in current protocol version; set to 0. + * @data_len: Length of data which follows this header. + */ +struct ec_host_request { + uint8_t struct_version; + uint8_t checksum; + uint16_t command; + uint8_t command_version; + uint8_t reserved; + uint16_t data_len; +} __ec_align4; + +#define EC_HOST_RESPONSE_VERSION 3 + +/** + * struct ec_host_response - Version 3 response from EC. + * @struct_version: Struct version (=3). + * @checksum: Checksum of response and data; sum of all bytes including + * checksum should total to 0. + * @result: EC's response to the command (separate from communication failure) + * @data_len: Length of data which follows this header. + * @reserved: Unused bytes in current protocol version; set to 0. + */ +struct ec_host_response { + uint8_t struct_version; + uint8_t checksum; + uint16_t result; + uint16_t data_len; + uint16_t reserved; +} __ec_align4; + +/*****************************************************************************/ + +/* + * Host command protocol V4. + * + * Packets always start with a request or response header. They are followed + * by data_len bytes of data. If the data_crc_present flag is set, the data + * bytes are followed by a CRC-8 of that data, using x^8 + x^2 + x + 1 + * polynomial. + * + * Host algorithm when sending a request q: + * + * 101) tries_left=(some value, e.g. 3); + * 102) q.seq_num++ + * 103) q.seq_dup=0 + * 104) Calculate q.header_crc. + * 105) Send request q to EC. + * 106) Wait for response r. Go to 201 if received or 301 if timeout. + * + * 201) If r.struct_version != 4, go to 301. + * 202) If r.header_crc mismatches calculated CRC for r header, go to 301. + * 203) If r.data_crc_present and r.data_crc mismatches, go to 301. + * 204) If r.seq_num != q.seq_num, go to 301. + * 205) If r.seq_dup == q.seq_dup, return success. + * 207) If r.seq_dup == 1, go to 301. + * 208) Return error. + * + * 301) If --tries_left <= 0, return error. + * 302) If q.seq_dup == 1, go to 105. + * 303) q.seq_dup = 1 + * 304) Go to 104. + * + * EC algorithm when receiving a request q. + * EC has response buffer r, error buffer e. + * + * 101) If q.struct_version != 4, set e.result = EC_RES_INVALID_HEADER_VERSION + * and go to 301 + * 102) If q.header_crc mismatches calculated CRC, set e.result = + * EC_RES_INVALID_HEADER_CRC and go to 301 + * 103) If q.data_crc_present, calculate data CRC. If that mismatches the CRC + * byte at the end of the packet, set e.result = EC_RES_INVALID_DATA_CRC + * and go to 301. + * 104) If q.seq_dup == 0, go to 201. + * 105) If q.seq_num != r.seq_num, go to 201. + * 106) If q.seq_dup == r.seq_dup, go to 205, else go to 203. + * + * 201) Process request q into response r. + * 202) r.seq_num = q.seq_num + * 203) r.seq_dup = q.seq_dup + * 204) Calculate r.header_crc + * 205) If r.data_len > 0 and data is no longer available, set e.result = + * EC_RES_DUP_UNAVAILABLE and go to 301. + * 206) Send response r. + * + * 301) e.seq_num = q.seq_num + * 302) e.seq_dup = q.seq_dup + * 303) Calculate e.header_crc. + * 304) Send error response e. + */ + +/* Version 4 request from host */ +struct ec_host_request4 { + /* + * bits 0-3: struct_version: Structure version (=4) + * bit 4: is_response: Is response (=0) + * bits 5-6: seq_num: Sequence number + * bit 7: seq_dup: Sequence duplicate flag + */ + uint8_t fields0; + + /* + * bits 0-4: command_version: Command version + * bits 5-6: Reserved (set 0, ignore on read) + * bit 7: data_crc_present: Is data CRC present after data + */ + uint8_t fields1; + + /* Command code (EC_CMD_*) */ + uint16_t command; + + /* Length of data which follows this header (not including data CRC) */ + uint16_t data_len; + + /* Reserved (set 0, ignore on read) */ + uint8_t reserved; + + /* CRC-8 of above fields, using x^8 + x^2 + x + 1 polynomial */ + uint8_t header_crc; +} __ec_align4; + +/* Version 4 response from EC */ +struct ec_host_response4 { + /* + * bits 0-3: struct_version: Structure version (=4) + * bit 4: is_response: Is response (=1) + * bits 5-6: seq_num: Sequence number + * bit 7: seq_dup: Sequence duplicate flag + */ + uint8_t fields0; + + /* + * bits 0-6: Reserved (set 0, ignore on read) + * bit 7: data_crc_present: Is data CRC present after data + */ + uint8_t fields1; + + /* Result code (EC_RES_*) */ + uint16_t result; + + /* Length of data which follows this header (not including data CRC) */ + uint16_t data_len; + + /* Reserved (set 0, ignore on read) */ + uint8_t reserved; + + /* CRC-8 of above fields, using x^8 + x^2 + x + 1 polynomial */ + uint8_t header_crc; +} __ec_align4; + +/* Fields in fields0 byte */ +#define EC_PACKET4_0_STRUCT_VERSION_MASK 0x0f +#define EC_PACKET4_0_IS_RESPONSE_MASK 0x10 +#define EC_PACKET4_0_SEQ_NUM_SHIFT 5 +#define EC_PACKET4_0_SEQ_NUM_MASK 0x60 +#define EC_PACKET4_0_SEQ_DUP_MASK 0x80 + +/* Fields in fields1 byte */ +#define EC_PACKET4_1_COMMAND_VERSION_MASK 0x1f /* (request only) */ +#define EC_PACKET4_1_DATA_CRC_PRESENT_MASK 0x80 + +/*****************************************************************************/ +/* + * Notes on commands: + * + * Each command is an 16-bit command value. Commands which take params or + * return response data specify structures for that data. If no structure is + * specified, the command does not input or output data, respectively. + * Parameter/response length is implicit in the structs. Some underlying + * communication protocols (I2C, SPI) may add length or checksum headers, but + * those are implementation-dependent and not defined here. + * + * All commands MUST be #defined to be 4-digit UPPER CASE hex values + * (e.g., 0x00AB, not 0xab) for CONFIG_HOSTCMD_SECTION_SORTED to work. + */ + +/*****************************************************************************/ +/* General / test commands */ + +/* + * Get protocol version, used to deal with non-backward compatible protocol + * changes. + */ +#define EC_CMD_PROTO_VERSION 0x0000 + +/** + * struct ec_response_proto_version - Response to the proto version command. + * @version: The protocol version. + */ +struct ec_response_proto_version { + uint32_t version; +} __ec_align4; + +/* + * Hello. This is a simple command to test the EC is responsive to + * commands. + */ +#define EC_CMD_HELLO 0x0001 + +/** + * struct ec_params_hello - Parameters to the hello command. + * @in_data: Pass anything here. + */ +struct ec_params_hello { + uint32_t in_data; +} __ec_align4; + +/** + * struct ec_response_hello - Response to the hello command. + * @out_data: Output will be in_data + 0x01020304. + */ +struct ec_response_hello { + uint32_t out_data; +} __ec_align4; + +/* Get version number */ +#define EC_CMD_GET_VERSION 0x0002 + +enum ec_current_image { + EC_IMAGE_UNKNOWN = 0, + EC_IMAGE_RO, + EC_IMAGE_RW +}; + +/** + * struct ec_response_get_version - Response to the get version command. + * @version_string_ro: Null-terminated RO firmware version string. + * @version_string_rw: Null-terminated RW firmware version string. + * @reserved: Unused bytes; was previously RW-B firmware version string. + * @current_image: One of ec_current_image. + */ +struct ec_response_get_version { + char version_string_ro[32]; + char version_string_rw[32]; + char reserved[32]; + uint32_t current_image; +} __ec_align4; + +/* Read test */ +#define EC_CMD_READ_TEST 0x0003 + +/** + * struct ec_params_read_test - Parameters for the read test command. + * @offset: Starting value for read buffer. + * @size: Size to read in bytes. + */ +struct ec_params_read_test { + uint32_t offset; + uint32_t size; +} __ec_align4; + +/** + * struct ec_response_read_test - Response to the read test command. + * @data: Data returned by the read test command. + */ +struct ec_response_read_test { + uint32_t data[32]; +} __ec_align4; + +/* + * Get build information + * + * Response is null-terminated string. + */ +#define EC_CMD_GET_BUILD_INFO 0x0004 + +/* Get chip info */ +#define EC_CMD_GET_CHIP_INFO 0x0005 + +/** + * struct ec_response_get_chip_info - Response to the get chip info command. + * @vendor: Null-terminated string for chip vendor. + * @name: Null-terminated string for chip name. + * @revision: Null-terminated string for chip mask version. + */ +struct ec_response_get_chip_info { + char vendor[32]; + char name[32]; + char revision[32]; +} __ec_align4; + +/* Get board HW version */ +#define EC_CMD_GET_BOARD_VERSION 0x0006 + +/** + * struct ec_response_board_version - Response to the board version command. + * @board_version: A monotonously incrementing number. + */ +struct ec_response_board_version { + uint16_t board_version; +} __ec_align2; + +/* + * Read memory-mapped data. + * + * This is an alternate interface to memory-mapped data for bus protocols + * which don't support direct-mapped memory - I2C, SPI, etc. + * + * Response is params.size bytes of data. + */ +#define EC_CMD_READ_MEMMAP 0x0007 + +/** + * struct ec_params_read_memmap - Parameters for the read memory map command. + * @offset: Offset in memmap (EC_MEMMAP_*). + * @size: Size to read in bytes. + */ +struct ec_params_read_memmap { + uint8_t offset; + uint8_t size; +} __ec_align1; + +/* Read versions supported for a command */ +#define EC_CMD_GET_CMD_VERSIONS 0x0008 + +/** + * struct ec_params_get_cmd_versions - Parameters for the get command versions. + * @cmd: Command to check. + */ +struct ec_params_get_cmd_versions { + uint8_t cmd; +} __ec_align1; + +/** + * struct ec_params_get_cmd_versions_v1 - Parameters for the get command + * versions (v1) + * @cmd: Command to check. + */ +struct ec_params_get_cmd_versions_v1 { + uint16_t cmd; +} __ec_align2; + +/** + * struct ec_response_get_cmd_versions - Response to the get command versions. + * @version_mask: Mask of supported versions; use EC_VER_MASK() to compare with + * a desired version. + */ +struct ec_response_get_cmd_versions { + uint32_t version_mask; +} __ec_align4; + +/* + * Check EC communications status (busy). This is needed on i2c/spi but not + * on lpc since it has its own out-of-band busy indicator. + * + * lpc must read the status from the command register. Attempting this on + * lpc will overwrite the args/parameter space and corrupt its data. + */ +#define EC_CMD_GET_COMMS_STATUS 0x0009 + +/* Avoid using ec_status which is for return values */ +enum ec_comms_status { + EC_COMMS_STATUS_PROCESSING = BIT(0), /* Processing cmd */ +}; + +/** + * struct ec_response_get_comms_status - Response to the get comms status + * command. + * @flags: Mask of enum ec_comms_status. + */ +struct ec_response_get_comms_status { + uint32_t flags; /* Mask of enum ec_comms_status */ +} __ec_align4; + +/* Fake a variety of responses, purely for testing purposes. */ +#define EC_CMD_TEST_PROTOCOL 0x000A + +/* Tell the EC what to send back to us. */ +struct ec_params_test_protocol { + uint32_t ec_result; + uint32_t ret_len; + uint8_t buf[32]; +} __ec_align4; + +/* Here it comes... */ +struct ec_response_test_protocol { + uint8_t buf[32]; +} __ec_align4; + +/* Get protocol information */ +#define EC_CMD_GET_PROTOCOL_INFO 0x000B + +/* Flags for ec_response_get_protocol_info.flags */ +/* EC_RES_IN_PROGRESS may be returned if a command is slow */ +#define EC_PROTOCOL_INFO_IN_PROGRESS_SUPPORTED BIT(0) + +/** + * struct ec_response_get_protocol_info - Response to the get protocol info. + * @protocol_versions: Bitmask of protocol versions supported (1 << n means + * version n). + * @max_request_packet_size: Maximum request packet size in bytes. + * @max_response_packet_size: Maximum response packet size in bytes. + * @flags: see EC_PROTOCOL_INFO_* + */ +struct ec_response_get_protocol_info { + /* Fields which exist if at least protocol version 3 supported */ + uint32_t protocol_versions; + uint16_t max_request_packet_size; + uint16_t max_response_packet_size; + uint32_t flags; +} __ec_align4; + + +/*****************************************************************************/ +/* Get/Set miscellaneous values */ + +/* The upper byte of .flags tells what to do (nothing means "get") */ +#define EC_GSV_SET 0x80000000 + +/* + * The lower three bytes of .flags identifies the parameter, if that has + * meaning for an individual command. + */ +#define EC_GSV_PARAM_MASK 0x00ffffff + +struct ec_params_get_set_value { + uint32_t flags; + uint32_t value; +} __ec_align4; + +struct ec_response_get_set_value { + uint32_t flags; + uint32_t value; +} __ec_align4; + +/* More than one command can use these structs to get/set parameters. */ +#define EC_CMD_GSV_PAUSE_IN_S5 0x000C + +/*****************************************************************************/ +/* List the features supported by the firmware */ +#define EC_CMD_GET_FEATURES 0x000D + +/* Supported features */ +enum ec_feature_code { + /* + * This image contains a limited set of features. Another image + * in RW partition may support more features. + */ + EC_FEATURE_LIMITED = 0, + /* + * Commands for probing/reading/writing/erasing the flash in the + * EC are present. + */ + EC_FEATURE_FLASH = 1, + /* + * Can control the fan speed directly. + */ + EC_FEATURE_PWM_FAN = 2, + /* + * Can control the intensity of the keyboard backlight. + */ + EC_FEATURE_PWM_KEYB = 3, + /* + * Support Google lightbar, introduced on Pixel. + */ + EC_FEATURE_LIGHTBAR = 4, + /* Control of LEDs */ + EC_FEATURE_LED = 5, + /* Exposes an interface to control gyro and sensors. + * The host goes through the EC to access these sensors. + * In addition, the EC may provide composite sensors, like lid angle. + */ + EC_FEATURE_MOTION_SENSE = 6, + /* The keyboard is controlled by the EC */ + EC_FEATURE_KEYB = 7, + /* The AP can use part of the EC flash as persistent storage. */ + EC_FEATURE_PSTORE = 8, + /* The EC monitors BIOS port 80h, and can return POST codes. */ + EC_FEATURE_PORT80 = 9, + /* + * Thermal management: include TMP specific commands. + * Higher level than direct fan control. + */ + EC_FEATURE_THERMAL = 10, + /* Can switch the screen backlight on/off */ + EC_FEATURE_BKLIGHT_SWITCH = 11, + /* Can switch the wifi module on/off */ + EC_FEATURE_WIFI_SWITCH = 12, + /* Monitor host events, through for example SMI or SCI */ + EC_FEATURE_HOST_EVENTS = 13, + /* The EC exposes GPIO commands to control/monitor connected devices. */ + EC_FEATURE_GPIO = 14, + /* The EC can send i2c messages to downstream devices. */ + EC_FEATURE_I2C = 15, + /* Command to control charger are included */ + EC_FEATURE_CHARGER = 16, + /* Simple battery support. */ + EC_FEATURE_BATTERY = 17, + /* + * Support Smart battery protocol + * (Common Smart Battery System Interface Specification) + */ + EC_FEATURE_SMART_BATTERY = 18, + /* EC can detect when the host hangs. */ + EC_FEATURE_HANG_DETECT = 19, + /* Report power information, for pit only */ + EC_FEATURE_PMU = 20, + /* Another Cros EC device is present downstream of this one */ + EC_FEATURE_SUB_MCU = 21, + /* Support USB Power delivery (PD) commands */ + EC_FEATURE_USB_PD = 22, + /* Control USB multiplexer, for audio through USB port for instance. */ + EC_FEATURE_USB_MUX = 23, + /* Motion Sensor code has an internal software FIFO */ + EC_FEATURE_MOTION_SENSE_FIFO = 24, + /* Support temporary secure vstore */ + EC_FEATURE_VSTORE = 25, + /* EC decides on USB-C SS mux state, muxes configured by host */ + EC_FEATURE_USBC_SS_MUX_VIRTUAL = 26, + /* EC has RTC feature that can be controlled by host commands */ + EC_FEATURE_RTC = 27, + /* The MCU exposes a Fingerprint sensor */ + EC_FEATURE_FINGERPRINT = 28, + /* The MCU exposes a Touchpad */ + EC_FEATURE_TOUCHPAD = 29, + /* The MCU has RWSIG task enabled */ + EC_FEATURE_RWSIG = 30, + /* EC has device events support */ + EC_FEATURE_DEVICE_EVENT = 31, + /* EC supports the unified wake masks for LPC/eSPI systems */ + EC_FEATURE_UNIFIED_WAKE_MASKS = 32, + /* EC supports 64-bit host events */ + EC_FEATURE_HOST_EVENT64 = 33, + /* EC runs code in RAM (not in place, a.k.a. XIP) */ + EC_FEATURE_EXEC_IN_RAM = 34, + /* EC supports CEC commands */ + EC_FEATURE_CEC = 35, + /* EC supports tight sensor timestamping. */ + EC_FEATURE_MOTION_SENSE_TIGHT_TIMESTAMPS = 36, + /* + * EC supports tablet mode detection aligned to Chrome and allows + * setting of threshold by host command using + * MOTIONSENSE_CMD_TABLET_MODE_LID_ANGLE. + */ + EC_FEATURE_REFINED_TABLET_MODE_HYSTERESIS = 37, + /* The MCU is a System Companion Processor (SCP). */ + EC_FEATURE_SCP = 39, + /* The MCU is an Integrated Sensor Hub */ + EC_FEATURE_ISH = 40, + /* New TCPMv2 TYPEC_ prefaced commands supported */ + EC_FEATURE_TYPEC_CMD = 41, + /* + * The EC will wait for direction from the AP to enter Type-C alternate + * modes or USB4. + */ + EC_FEATURE_TYPEC_REQUIRE_AP_MODE_ENTRY = 42, + /* + * The EC will wait for an acknowledge from the AP after setting the + * mux. + */ + EC_FEATURE_TYPEC_MUX_REQUIRE_AP_ACK = 43, + /* + * The EC supports entering and residing in S4. + */ + EC_FEATURE_S4_RESIDENCY = 44, + /* + * The EC supports the AP directing mux sets for the board. + */ + EC_FEATURE_TYPEC_AP_MUX_SET = 45, + /* + * The EC supports the AP composing VDMs for us to send. + */ + EC_FEATURE_TYPEC_AP_VDM_SEND = 46, + /* + * The EC supports system safe mode panic recovery. + */ + EC_FEATURE_SYSTEM_SAFE_MODE = 47, + /* + * The EC will reboot on runtime assertion failures. + */ + EC_FEATURE_ASSERT_REBOOTS = 48, + /* + * The EC image is built with tokenized logging enabled. + */ + EC_FEATURE_TOKENIZED_LOGGING = 49, + /* + * The EC supports triggering an STB dump. + */ + EC_FEATURE_AMD_STB_DUMP = 50, + /* + * The EC supports memory dump commands. + */ + EC_FEATURE_MEMORY_DUMP = 51, + /* + * The EC supports DP2.1 capability + */ + EC_FEATURE_TYPEC_DP2_1 = 52, + /* + * The MCU is System Companion Processor Core 1 + */ + EC_FEATURE_SCP_C1 = 53, + /* + * The EC supports UCSI PPM. + */ + EC_FEATURE_UCSI_PPM = 54, +}; + +#define EC_FEATURE_MASK_0(event_code) BIT(event_code % 32) +#define EC_FEATURE_MASK_1(event_code) BIT(event_code - 32) + +struct ec_response_get_features { + uint32_t flags[2]; +} __ec_align4; + +/*****************************************************************************/ +/* Get the board's SKU ID from EC */ +#define EC_CMD_GET_SKU_ID 0x000E + +/* Set SKU ID from AP */ +#define EC_CMD_SET_SKU_ID 0x000F + +struct ec_sku_id_info { + uint32_t sku_id; +} __ec_align4; + +/*****************************************************************************/ +/* Flash commands */ + +/* Get flash info */ +#define EC_CMD_FLASH_INFO 0x0010 +#define EC_VER_FLASH_INFO 2 + +/** + * struct ec_response_flash_info - Response to the flash info command. + * @flash_size: Usable flash size in bytes. + * @write_block_size: Write block size. Write offset and size must be a + * multiple of this. + * @erase_block_size: Erase block size. Erase offset and size must be a + * multiple of this. + * @protect_block_size: Protection block size. Protection offset and size + * must be a multiple of this. + * + * Version 0 returns these fields. + */ +struct ec_response_flash_info { + uint32_t flash_size; + uint32_t write_block_size; + uint32_t erase_block_size; + uint32_t protect_block_size; +} __ec_align4; + +/* + * Flags for version 1+ flash info command + * EC flash erases bits to 0 instead of 1. + */ +#define EC_FLASH_INFO_ERASE_TO_0 BIT(0) + +/* + * Flash must be selected for read/write/erase operations to succeed. This may + * be necessary on a chip where write/erase can be corrupted by other board + * activity, or where the chip needs to enable some sort of programming voltage, + * or where the read/write/erase operations require cleanly suspending other + * chip functionality. + */ +#define EC_FLASH_INFO_SELECT_REQUIRED BIT(1) + +/** + * struct ec_response_flash_info_1 - Response to the flash info v1 command. + * @flash_size: Usable flash size in bytes. + * @write_block_size: Write block size. Write offset and size must be a + * multiple of this. + * @erase_block_size: Erase block size. Erase offset and size must be a + * multiple of this. + * @protect_block_size: Protection block size. Protection offset and size + * must be a multiple of this. + * @write_ideal_size: Ideal write size in bytes. Writes will be fastest if + * size is exactly this and offset is a multiple of this. + * For example, an EC may have a write buffer which can do + * half-page operations if data is aligned, and a slower + * word-at-a-time write mode. + * @flags: Flags; see EC_FLASH_INFO_* + * + * Version 1 returns the same initial fields as version 0, with additional + * fields following. + * + * gcc anonymous structs don't seem to get along with the __packed directive; + * if they did we'd define the version 0 structure as a sub-structure of this + * one. + * + * Version 2 supports flash banks of different sizes: + * The caller specified the number of banks it has preallocated + * (num_banks_desc) + * The EC returns the number of banks describing the flash memory. + * It adds banks descriptions up to num_banks_desc. + */ +struct ec_response_flash_info_1 { + /* Version 0 fields; see above for description */ + uint32_t flash_size; + uint32_t write_block_size; + uint32_t erase_block_size; + uint32_t protect_block_size; + + /* Version 1 adds these fields: */ + uint32_t write_ideal_size; + uint32_t flags; +} __ec_align4; + +struct ec_params_flash_info_2 { + /* Number of banks to describe */ + uint16_t num_banks_desc; + /* Reserved; set 0; ignore on read */ + uint8_t reserved[2]; +} __ec_align4; + +struct ec_flash_bank { + /* Number of sector is in this bank. */ + uint16_t count; + /* Size in power of 2 of each sector (8 --> 256 bytes) */ + uint8_t size_exp; + /* Minimal write size for the sectors in this bank */ + uint8_t write_size_exp; + /* Erase size for the sectors in this bank */ + uint8_t erase_size_exp; + /* Size for write protection, usually identical to erase size. */ + uint8_t protect_size_exp; + /* Reserved; set 0; ignore on read */ + uint8_t reserved[2]; +}; + +struct ec_response_flash_info_2 { + /* Total flash in the EC. */ + uint32_t flash_size; + /* Flags; see EC_FLASH_INFO_* */ + uint32_t flags; + /* Maximum size to use to send data to write to the EC. */ + uint32_t write_ideal_size; + /* Number of banks present in the EC. */ + uint16_t num_banks_total; + /* Number of banks described in banks array. */ + uint16_t num_banks_desc; + struct ec_flash_bank banks[]; +} __ec_align4; + +/* + * Read flash + * + * Response is params.size bytes of data. + */ +#define EC_CMD_FLASH_READ 0x0011 + +/** + * struct ec_params_flash_read - Parameters for the flash read command. + * @offset: Byte offset to read. + * @size: Size to read in bytes. + */ +struct ec_params_flash_read { + uint32_t offset; + uint32_t size; +} __ec_align4; + +/* Write flash */ +#define EC_CMD_FLASH_WRITE 0x0012 +#define EC_VER_FLASH_WRITE 1 + +/* Version 0 of the flash command supported only 64 bytes of data */ +#define EC_FLASH_WRITE_VER0_SIZE 64 + +/** + * struct ec_params_flash_write - Parameters for the flash write command. + * @offset: Byte offset to write. + * @size: Size to write in bytes. + */ +struct ec_params_flash_write { + uint32_t offset; + uint32_t size; + /* Followed by data to write */ +} __ec_align4; + +/* Erase flash */ +#define EC_CMD_FLASH_ERASE 0x0013 + +/** + * struct ec_params_flash_erase - Parameters for the flash erase command, v0. + * @offset: Byte offset to erase. + * @size: Size to erase in bytes. + */ +struct ec_params_flash_erase { + uint32_t offset; + uint32_t size; +} __ec_align4; + +/* + * v1 add async erase: + * subcommands can returns: + * EC_RES_SUCCESS : erased (see ERASE_SECTOR_ASYNC case below). + * EC_RES_INVALID_PARAM : offset/size are not aligned on a erase boundary. + * EC_RES_ERROR : other errors. + * EC_RES_BUSY : an existing erase operation is in progress. + * EC_RES_ACCESS_DENIED: Trying to erase running image. + * + * When ERASE_SECTOR_ASYNC returns EC_RES_SUCCESS, the operation is just + * properly queued. The user must call ERASE_GET_RESULT subcommand to get + * the proper result. + * When ERASE_GET_RESULT returns EC_RES_BUSY, the caller must wait and send + * ERASE_GET_RESULT again to get the result of ERASE_SECTOR_ASYNC. + * ERASE_GET_RESULT command may timeout on EC where flash access is not + * permitted while erasing. (For instance, STM32F4). + */ +enum ec_flash_erase_cmd { + FLASH_ERASE_SECTOR, /* Erase and wait for result */ + FLASH_ERASE_SECTOR_ASYNC, /* Erase and return immediately. */ + FLASH_ERASE_GET_RESULT, /* Ask for last erase result */ +}; + +/** + * struct ec_params_flash_erase_v1 - Parameters for the flash erase command, v1. + * @cmd: One of ec_flash_erase_cmd. + * @reserved: Pad byte; currently always contains 0. + * @flag: No flags defined yet; set to 0. + * @params: Same as v0 parameters. + */ +struct ec_params_flash_erase_v1 { + uint8_t cmd; + uint8_t reserved; + uint16_t flag; + struct ec_params_flash_erase params; +} __ec_align4; + +/* + * Get/set flash protection. + * + * If mask!=0, sets/clear the requested bits of flags. Depending on the + * firmware write protect GPIO, not all flags will take effect immediately; + * some flags require a subsequent hard reset to take effect. Check the + * returned flags bits to see what actually happened. + * + * If mask=0, simply returns the current flags state. + */ +#define EC_CMD_FLASH_PROTECT 0x0015 +#define EC_VER_FLASH_PROTECT 1 /* Command version 1 */ + +/* Flags for flash protection */ +/* RO flash code protected when the EC boots */ +#define EC_FLASH_PROTECT_RO_AT_BOOT BIT(0) +/* + * RO flash code protected now. If this bit is set, at-boot status cannot + * be changed. + */ +#define EC_FLASH_PROTECT_RO_NOW BIT(1) +/* Entire flash code protected now, until reboot. */ +#define EC_FLASH_PROTECT_ALL_NOW BIT(2) +/* Flash write protect GPIO is asserted now */ +#define EC_FLASH_PROTECT_GPIO_ASSERTED BIT(3) +/* Error - at least one bank of flash is stuck locked, and cannot be unlocked */ +#define EC_FLASH_PROTECT_ERROR_STUCK BIT(4) +/* + * Error - flash protection is in inconsistent state. At least one bank of + * flash which should be protected is not protected. Usually fixed by + * re-requesting the desired flags, or by a hard reset if that fails. + */ +#define EC_FLASH_PROTECT_ERROR_INCONSISTENT BIT(5) +/* Entire flash code protected when the EC boots */ +#define EC_FLASH_PROTECT_ALL_AT_BOOT BIT(6) +/* RW flash code protected when the EC boots */ +#define EC_FLASH_PROTECT_RW_AT_BOOT BIT(7) +/* RW flash code protected now. */ +#define EC_FLASH_PROTECT_RW_NOW BIT(8) +/* Rollback information flash region protected when the EC boots */ +#define EC_FLASH_PROTECT_ROLLBACK_AT_BOOT BIT(9) +/* Rollback information flash region protected now */ +#define EC_FLASH_PROTECT_ROLLBACK_NOW BIT(10) + + +/** + * struct ec_params_flash_protect - Parameters for the flash protect command. + * @mask: Bits in flags to apply. + * @flags: New flags to apply. + */ +struct ec_params_flash_protect { + uint32_t mask; + uint32_t flags; +} __ec_align4; + +/** + * struct ec_response_flash_protect - Response to the flash protect command. + * @flags: Current value of flash protect flags. + * @valid_flags: Flags which are valid on this platform. This allows the + * caller to distinguish between flags which aren't set vs. flags + * which can't be set on this platform. + * @writable_flags: Flags which can be changed given the current protection + * state. + */ +struct ec_response_flash_protect { + uint32_t flags; + uint32_t valid_flags; + uint32_t writable_flags; +} __ec_align4; + +/* + * Note: commands 0x14 - 0x19 version 0 were old commands to get/set flash + * write protect. These commands may be reused with version > 0. + */ + +/* Get the region offset/size */ +#define EC_CMD_FLASH_REGION_INFO 0x0016 +#define EC_VER_FLASH_REGION_INFO 1 + +enum ec_flash_region { + /* Region which holds read-only EC image */ + EC_FLASH_REGION_RO = 0, + /* + * Region which holds active RW image. 'Active' is different from + * 'running'. Active means 'scheduled-to-run'. Since RO image always + * scheduled to run, active/non-active applies only to RW images (for + * the same reason 'update' applies only to RW images. It's a state of + * an image on a flash. Running image can be RO, RW_A, RW_B but active + * image can only be RW_A or RW_B. In recovery mode, an active RW image + * doesn't enter 'running' state but it's still active on a flash. + */ + EC_FLASH_REGION_ACTIVE, + /* + * Region which should be write-protected in the factory (a superset of + * EC_FLASH_REGION_RO) + */ + EC_FLASH_REGION_WP_RO, + /* Region which holds updatable (non-active) RW image */ + EC_FLASH_REGION_UPDATE, + /* Number of regions */ + EC_FLASH_REGION_COUNT, +}; +/* + * 'RW' is vague if there are multiple RW images; we mean the active one, + * so the old constant is deprecated. + */ +#define EC_FLASH_REGION_RW EC_FLASH_REGION_ACTIVE + +/** + * struct ec_params_flash_region_info - Parameters for the flash region info + * command. + * @region: Flash region; see EC_FLASH_REGION_* + */ +struct ec_params_flash_region_info { + uint32_t region; +} __ec_align4; + +struct ec_response_flash_region_info { + uint32_t offset; + uint32_t size; +} __ec_align4; + +/* Read/write VbNvContext */ +#define EC_CMD_VBNV_CONTEXT 0x0017 +#define EC_VER_VBNV_CONTEXT 1 +#define EC_VBNV_BLOCK_SIZE 16 + +enum ec_vbnvcontext_op { + EC_VBNV_CONTEXT_OP_READ, + EC_VBNV_CONTEXT_OP_WRITE, +}; + +struct ec_params_vbnvcontext { + uint32_t op; + uint8_t block[EC_VBNV_BLOCK_SIZE]; +} __ec_align4; + +struct ec_response_vbnvcontext { + uint8_t block[EC_VBNV_BLOCK_SIZE]; +} __ec_align4; + + +/* Get SPI flash information */ +#define EC_CMD_FLASH_SPI_INFO 0x0018 + +struct ec_response_flash_spi_info { + /* JEDEC info from command 0x9F (manufacturer, memory type, size) */ + uint8_t jedec[3]; + + /* Pad byte; currently always contains 0 */ + uint8_t reserved0; + + /* Manufacturer / device ID from command 0x90 */ + uint8_t mfr_dev_id[2]; + + /* Status registers from command 0x05 and 0x35 */ + uint8_t sr1, sr2; +} __ec_align1; + + +/* Select flash during flash operations */ +#define EC_CMD_FLASH_SELECT 0x0019 + +/** + * struct ec_params_flash_select - Parameters for the flash select command. + * @select: 1 to select flash, 0 to deselect flash + */ +struct ec_params_flash_select { + uint8_t select; +} __ec_align4; + + +/*****************************************************************************/ +/* PWM commands */ + +/* Get fan target RPM */ +#define EC_CMD_PWM_GET_FAN_TARGET_RPM 0x0020 + +struct ec_response_pwm_get_fan_rpm { + uint32_t rpm; +} __ec_align4; + +/* Set target fan RPM */ +#define EC_CMD_PWM_SET_FAN_TARGET_RPM 0x0021 + +/* Version 0 of input params */ +struct ec_params_pwm_set_fan_target_rpm_v0 { + uint32_t rpm; +} __ec_align4; + +/* Version 1 of input params */ +struct ec_params_pwm_set_fan_target_rpm_v1 { + uint32_t rpm; + uint8_t fan_idx; +} __ec_align_size1; + +/* Get keyboard backlight */ +/* OBSOLETE - Use EC_CMD_PWM_SET_DUTY */ +#define EC_CMD_PWM_GET_KEYBOARD_BACKLIGHT 0x0022 + +struct ec_response_pwm_get_keyboard_backlight { + uint8_t percent; + uint8_t enabled; +} __ec_align1; + +/* Set keyboard backlight */ +/* OBSOLETE - Use EC_CMD_PWM_SET_DUTY */ +#define EC_CMD_PWM_SET_KEYBOARD_BACKLIGHT 0x0023 + +struct ec_params_pwm_set_keyboard_backlight { + uint8_t percent; +} __ec_align1; + +/* Set target fan PWM duty cycle */ +#define EC_CMD_PWM_SET_FAN_DUTY 0x0024 + +/* Version 0 of input params */ +struct ec_params_pwm_set_fan_duty_v0 { + uint32_t percent; +} __ec_align4; + +/* Version 1 of input params */ +struct ec_params_pwm_set_fan_duty_v1 { + uint32_t percent; + uint8_t fan_idx; +} __ec_align_size1; + +#define EC_CMD_PWM_SET_DUTY 0x0025 +/* 16 bit duty cycle, 0xffff = 100% */ +#define EC_PWM_MAX_DUTY 0xffff + +enum ec_pwm_type { + /* All types, indexed by board-specific enum pwm_channel */ + EC_PWM_TYPE_GENERIC = 0, + /* Keyboard backlight */ + EC_PWM_TYPE_KB_LIGHT, + /* Display backlight */ + EC_PWM_TYPE_DISPLAY_LIGHT, + EC_PWM_TYPE_COUNT, +}; + +struct ec_params_pwm_set_duty { + uint16_t duty; /* Duty cycle, EC_PWM_MAX_DUTY = 100% */ + uint8_t pwm_type; /* ec_pwm_type */ + uint8_t index; /* Type-specific index, or 0 if unique */ +} __ec_align4; + +#define EC_CMD_PWM_GET_DUTY 0x0026 + +struct ec_params_pwm_get_duty { + uint8_t pwm_type; /* ec_pwm_type */ + uint8_t index; /* Type-specific index, or 0 if unique */ +} __ec_align1; + +struct ec_response_pwm_get_duty { + uint16_t duty; /* Duty cycle, EC_PWM_MAX_DUTY = 100% */ +} __ec_align2; + +#define EC_CMD_PWM_GET_FAN_DUTY 0x0027 + +struct ec_params_pwm_get_fan_duty { + uint8_t fan_idx; +} __ec_align1; + +struct ec_response_pwm_get_fan_duty { + uint32_t percent; /* Percentage of duty cycle, ranging from 0 ~ 100 */ +} __ec_align4; + +/*****************************************************************************/ +/* + * Lightbar commands. This looks worse than it is. Since we only use one HOST + * command to say "talk to the lightbar", we put the "and tell it to do X" part + * into a subcommand. We'll make separate structs for subcommands with + * different input args, so that we know how much to expect. + */ +#define EC_CMD_LIGHTBAR_CMD 0x0028 + +struct rgb_s { + uint8_t r, g, b; +} __ec_todo_unpacked; + +#define LB_BATTERY_LEVELS 4 + +/* + * List of tweakable parameters. NOTE: It's __packed so it can be sent in a + * host command, but the alignment is the same regardless. Keep it that way. + */ +struct lightbar_params_v0 { + /* Timing */ + int32_t google_ramp_up; + int32_t google_ramp_down; + int32_t s3s0_ramp_up; + int32_t s0_tick_delay[2]; /* AC=0/1 */ + int32_t s0a_tick_delay[2]; /* AC=0/1 */ + int32_t s0s3_ramp_down; + int32_t s3_sleep_for; + int32_t s3_ramp_up; + int32_t s3_ramp_down; + + /* Oscillation */ + uint8_t new_s0; + uint8_t osc_min[2]; /* AC=0/1 */ + uint8_t osc_max[2]; /* AC=0/1 */ + uint8_t w_ofs[2]; /* AC=0/1 */ + + /* Brightness limits based on the backlight and AC. */ + uint8_t bright_bl_off_fixed[2]; /* AC=0/1 */ + uint8_t bright_bl_on_min[2]; /* AC=0/1 */ + uint8_t bright_bl_on_max[2]; /* AC=0/1 */ + + /* Battery level thresholds */ + uint8_t battery_threshold[LB_BATTERY_LEVELS - 1]; + + /* Map [AC][battery_level] to color index */ + uint8_t s0_idx[2][LB_BATTERY_LEVELS]; /* AP is running */ + uint8_t s3_idx[2][LB_BATTERY_LEVELS]; /* AP is sleeping */ + + /* Color palette */ + struct rgb_s color[8]; /* 0-3 are Google colors */ +} __ec_todo_packed; + +struct lightbar_params_v1 { + /* Timing */ + int32_t google_ramp_up; + int32_t google_ramp_down; + int32_t s3s0_ramp_up; + int32_t s0_tick_delay[2]; /* AC=0/1 */ + int32_t s0a_tick_delay[2]; /* AC=0/1 */ + int32_t s0s3_ramp_down; + int32_t s3_sleep_for; + int32_t s3_ramp_up; + int32_t s3_ramp_down; + int32_t s5_ramp_up; + int32_t s5_ramp_down; + int32_t tap_tick_delay; + int32_t tap_gate_delay; + int32_t tap_display_time; + + /* Tap-for-battery params */ + uint8_t tap_pct_red; + uint8_t tap_pct_green; + uint8_t tap_seg_min_on; + uint8_t tap_seg_max_on; + uint8_t tap_seg_osc; + uint8_t tap_idx[3]; + + /* Oscillation */ + uint8_t osc_min[2]; /* AC=0/1 */ + uint8_t osc_max[2]; /* AC=0/1 */ + uint8_t w_ofs[2]; /* AC=0/1 */ + + /* Brightness limits based on the backlight and AC. */ + uint8_t bright_bl_off_fixed[2]; /* AC=0/1 */ + uint8_t bright_bl_on_min[2]; /* AC=0/1 */ + uint8_t bright_bl_on_max[2]; /* AC=0/1 */ + + /* Battery level thresholds */ + uint8_t battery_threshold[LB_BATTERY_LEVELS - 1]; + + /* Map [AC][battery_level] to color index */ + uint8_t s0_idx[2][LB_BATTERY_LEVELS]; /* AP is running */ + uint8_t s3_idx[2][LB_BATTERY_LEVELS]; /* AP is sleeping */ + + /* s5: single color pulse on inhibited power-up */ + uint8_t s5_idx; + + /* Color palette */ + struct rgb_s color[8]; /* 0-3 are Google colors */ +} __ec_todo_packed; + +/* Lightbar command params v2 + * crbug.com/467716 + * + * lightbar_parms_v1 was too big for i2c, therefore in v2, we split them up by + * logical groups to make it more manageable ( < 120 bytes). + * + * NOTE: Each of these groups must be less than 120 bytes. + */ + +struct lightbar_params_v2_timing { + /* Timing */ + int32_t google_ramp_up; + int32_t google_ramp_down; + int32_t s3s0_ramp_up; + int32_t s0_tick_delay[2]; /* AC=0/1 */ + int32_t s0a_tick_delay[2]; /* AC=0/1 */ + int32_t s0s3_ramp_down; + int32_t s3_sleep_for; + int32_t s3_ramp_up; + int32_t s3_ramp_down; + int32_t s5_ramp_up; + int32_t s5_ramp_down; + int32_t tap_tick_delay; + int32_t tap_gate_delay; + int32_t tap_display_time; +} __ec_todo_packed; + +struct lightbar_params_v2_tap { + /* Tap-for-battery params */ + uint8_t tap_pct_red; + uint8_t tap_pct_green; + uint8_t tap_seg_min_on; + uint8_t tap_seg_max_on; + uint8_t tap_seg_osc; + uint8_t tap_idx[3]; +} __ec_todo_packed; + +struct lightbar_params_v2_oscillation { + /* Oscillation */ + uint8_t osc_min[2]; /* AC=0/1 */ + uint8_t osc_max[2]; /* AC=0/1 */ + uint8_t w_ofs[2]; /* AC=0/1 */ +} __ec_todo_packed; + +struct lightbar_params_v2_brightness { + /* Brightness limits based on the backlight and AC. */ + uint8_t bright_bl_off_fixed[2]; /* AC=0/1 */ + uint8_t bright_bl_on_min[2]; /* AC=0/1 */ + uint8_t bright_bl_on_max[2]; /* AC=0/1 */ +} __ec_todo_packed; + +struct lightbar_params_v2_thresholds { + /* Battery level thresholds */ + uint8_t battery_threshold[LB_BATTERY_LEVELS - 1]; +} __ec_todo_packed; + +struct lightbar_params_v2_colors { + /* Map [AC][battery_level] to color index */ + uint8_t s0_idx[2][LB_BATTERY_LEVELS]; /* AP is running */ + uint8_t s3_idx[2][LB_BATTERY_LEVELS]; /* AP is sleeping */ + + /* s5: single color pulse on inhibited power-up */ + uint8_t s5_idx; + + /* Color palette */ + struct rgb_s color[8]; /* 0-3 are Google colors */ +} __ec_todo_packed; + +/* Lightbar program. */ +#define EC_LB_PROG_LEN 192 +struct lightbar_program { + uint8_t size; + uint8_t data[EC_LB_PROG_LEN]; +} __ec_todo_unpacked; + +struct ec_params_lightbar { + uint8_t cmd; /* Command (see enum lightbar_command) */ + union { + /* + * The following commands have no args: + * + * dump, off, on, init, get_seq, get_params_v0, get_params_v1, + * version, get_brightness, get_demo, suspend, resume, + * get_params_v2_timing, get_params_v2_tap, get_params_v2_osc, + * get_params_v2_bright, get_params_v2_thlds, + * get_params_v2_colors + * + * Don't use an empty struct, because C++ hates that. + */ + + struct __ec_todo_unpacked { + uint8_t num; + } set_brightness, seq, demo; + + struct __ec_todo_unpacked { + uint8_t ctrl, reg, value; + } reg; + + struct __ec_todo_unpacked { + uint8_t led, red, green, blue; + } set_rgb; + + struct __ec_todo_unpacked { + uint8_t led; + } get_rgb; + + struct __ec_todo_unpacked { + uint8_t enable; + } manual_suspend_ctrl; + + struct lightbar_params_v0 set_params_v0; + struct lightbar_params_v1 set_params_v1; + + struct lightbar_params_v2_timing set_v2par_timing; + struct lightbar_params_v2_tap set_v2par_tap; + struct lightbar_params_v2_oscillation set_v2par_osc; + struct lightbar_params_v2_brightness set_v2par_bright; + struct lightbar_params_v2_thresholds set_v2par_thlds; + struct lightbar_params_v2_colors set_v2par_colors; + + struct lightbar_program set_program; + }; +} __ec_todo_packed; + +struct ec_response_lightbar { + union { + struct __ec_todo_unpacked { + struct __ec_todo_unpacked { + uint8_t reg; + uint8_t ic0; + uint8_t ic1; + } vals[23]; + } dump; + + struct __ec_todo_unpacked { + uint8_t num; + } get_seq, get_brightness, get_demo; + + struct lightbar_params_v0 get_params_v0; + struct lightbar_params_v1 get_params_v1; + + + struct lightbar_params_v2_timing get_params_v2_timing; + struct lightbar_params_v2_tap get_params_v2_tap; + struct lightbar_params_v2_oscillation get_params_v2_osc; + struct lightbar_params_v2_brightness get_params_v2_bright; + struct lightbar_params_v2_thresholds get_params_v2_thlds; + struct lightbar_params_v2_colors get_params_v2_colors; + + struct __ec_todo_unpacked { + uint32_t num; + uint32_t flags; + } version; + + struct __ec_todo_unpacked { + uint8_t red, green, blue; + } get_rgb; + + /* + * The following commands have no response: + * + * off, on, init, set_brightness, seq, reg, set_rgb, demo, + * set_params_v0, set_params_v1, set_program, + * manual_suspend_ctrl, suspend, resume, set_v2par_timing, + * set_v2par_tap, set_v2par_osc, set_v2par_bright, + * set_v2par_thlds, set_v2par_colors + */ + }; +} __ec_todo_packed; + +/* Lightbar commands */ +enum lightbar_command { + LIGHTBAR_CMD_DUMP = 0, + LIGHTBAR_CMD_OFF = 1, + LIGHTBAR_CMD_ON = 2, + LIGHTBAR_CMD_INIT = 3, + LIGHTBAR_CMD_SET_BRIGHTNESS = 4, + LIGHTBAR_CMD_SEQ = 5, + LIGHTBAR_CMD_REG = 6, + LIGHTBAR_CMD_SET_RGB = 7, + LIGHTBAR_CMD_GET_SEQ = 8, + LIGHTBAR_CMD_DEMO = 9, + LIGHTBAR_CMD_GET_PARAMS_V0 = 10, + LIGHTBAR_CMD_SET_PARAMS_V0 = 11, + LIGHTBAR_CMD_VERSION = 12, + LIGHTBAR_CMD_GET_BRIGHTNESS = 13, + LIGHTBAR_CMD_GET_RGB = 14, + LIGHTBAR_CMD_GET_DEMO = 15, + LIGHTBAR_CMD_GET_PARAMS_V1 = 16, + LIGHTBAR_CMD_SET_PARAMS_V1 = 17, + LIGHTBAR_CMD_SET_PROGRAM = 18, + LIGHTBAR_CMD_MANUAL_SUSPEND_CTRL = 19, + LIGHTBAR_CMD_SUSPEND = 20, + LIGHTBAR_CMD_RESUME = 21, + LIGHTBAR_CMD_GET_PARAMS_V2_TIMING = 22, + LIGHTBAR_CMD_SET_PARAMS_V2_TIMING = 23, + LIGHTBAR_CMD_GET_PARAMS_V2_TAP = 24, + LIGHTBAR_CMD_SET_PARAMS_V2_TAP = 25, + LIGHTBAR_CMD_GET_PARAMS_V2_OSCILLATION = 26, + LIGHTBAR_CMD_SET_PARAMS_V2_OSCILLATION = 27, + LIGHTBAR_CMD_GET_PARAMS_V2_BRIGHTNESS = 28, + LIGHTBAR_CMD_SET_PARAMS_V2_BRIGHTNESS = 29, + LIGHTBAR_CMD_GET_PARAMS_V2_THRESHOLDS = 30, + LIGHTBAR_CMD_SET_PARAMS_V2_THRESHOLDS = 31, + LIGHTBAR_CMD_GET_PARAMS_V2_COLORS = 32, + LIGHTBAR_CMD_SET_PARAMS_V2_COLORS = 33, + LIGHTBAR_NUM_CMDS +}; + +/*****************************************************************************/ +/* LED control commands */ + +#define EC_CMD_LED_CONTROL 0x0029 + +enum ec_led_id { + /* LED to indicate battery state of charge */ + EC_LED_ID_BATTERY_LED = 0, + /* + * LED to indicate system power state (on or in suspend). + * May be on power button or on C-panel. + */ + EC_LED_ID_POWER_LED, + /* LED on power adapter or its plug */ + EC_LED_ID_ADAPTER_LED, + /* LED to indicate left side */ + EC_LED_ID_LEFT_LED, + /* LED to indicate right side */ + EC_LED_ID_RIGHT_LED, + /* LED to indicate recovery mode with HW_REINIT */ + EC_LED_ID_RECOVERY_HW_REINIT_LED, + /* LED to indicate sysrq debug mode. */ + EC_LED_ID_SYSRQ_DEBUG_LED, + + EC_LED_ID_COUNT +}; + +/* LED control flags */ +#define EC_LED_FLAGS_QUERY BIT(0) /* Query LED capability only */ +#define EC_LED_FLAGS_AUTO BIT(1) /* Switch LED back to automatic control */ + +enum ec_led_colors { + EC_LED_COLOR_RED = 0, + EC_LED_COLOR_GREEN, + EC_LED_COLOR_BLUE, + EC_LED_COLOR_YELLOW, + EC_LED_COLOR_WHITE, + EC_LED_COLOR_AMBER, + + EC_LED_COLOR_COUNT +}; + +struct ec_params_led_control { + uint8_t led_id; /* Which LED to control */ + uint8_t flags; /* Control flags */ + + uint8_t brightness[EC_LED_COLOR_COUNT]; +} __ec_align1; + +struct ec_response_led_control { + /* + * Available brightness value range. + * + * Range 0 means color channel not present. + * Range 1 means on/off control. + * Other values means the LED is control by PWM. + */ + uint8_t brightness_range[EC_LED_COLOR_COUNT]; +} __ec_align1; + +/*****************************************************************************/ +/* Verified boot commands */ + +/* + * Note: command code 0x29 version 0 was VBOOT_CMD in Link EVT; it may be + * reused for other purposes with version > 0. + */ + +/* Verified boot hash command */ +#define EC_CMD_VBOOT_HASH 0x002A + +struct ec_params_vboot_hash { + uint8_t cmd; /* enum ec_vboot_hash_cmd */ + uint8_t hash_type; /* enum ec_vboot_hash_type */ + uint8_t nonce_size; /* Nonce size; may be 0 */ + uint8_t reserved0; /* Reserved; set 0 */ + uint32_t offset; /* Offset in flash to hash */ + uint32_t size; /* Number of bytes to hash */ + uint8_t nonce_data[64]; /* Nonce data; ignored if nonce_size=0 */ +} __ec_align4; + +struct ec_response_vboot_hash { + uint8_t status; /* enum ec_vboot_hash_status */ + uint8_t hash_type; /* enum ec_vboot_hash_type */ + uint8_t digest_size; /* Size of hash digest in bytes */ + uint8_t reserved0; /* Ignore; will be 0 */ + uint32_t offset; /* Offset in flash which was hashed */ + uint32_t size; /* Number of bytes hashed */ + uint8_t hash_digest[64]; /* Hash digest data */ +} __ec_align4; + +enum ec_vboot_hash_cmd { + EC_VBOOT_HASH_GET = 0, /* Get current hash status */ + EC_VBOOT_HASH_ABORT = 1, /* Abort calculating current hash */ + EC_VBOOT_HASH_START = 2, /* Start computing a new hash */ + EC_VBOOT_HASH_RECALC = 3, /* Synchronously compute a new hash */ +}; + +enum ec_vboot_hash_type { + EC_VBOOT_HASH_TYPE_SHA256 = 0, /* SHA-256 */ +}; + +enum ec_vboot_hash_status { + EC_VBOOT_HASH_STATUS_NONE = 0, /* No hash (not started, or aborted) */ + EC_VBOOT_HASH_STATUS_DONE = 1, /* Finished computing a hash */ + EC_VBOOT_HASH_STATUS_BUSY = 2, /* Busy computing a hash */ +}; + +/* + * Special values for offset for EC_VBOOT_HASH_START and EC_VBOOT_HASH_RECALC. + * If one of these is specified, the EC will automatically update offset and + * size to the correct values for the specified image (RO or RW). + */ +#define EC_VBOOT_HASH_OFFSET_RO 0xfffffffe +#define EC_VBOOT_HASH_OFFSET_ACTIVE 0xfffffffd +#define EC_VBOOT_HASH_OFFSET_UPDATE 0xfffffffc + +/* + * 'RW' is vague if there are multiple RW images; we mean the active one, + * so the old constant is deprecated. + */ +#define EC_VBOOT_HASH_OFFSET_RW EC_VBOOT_HASH_OFFSET_ACTIVE + +/*****************************************************************************/ +/* + * Motion sense commands. We'll make separate structs for sub-commands with + * different input args, so that we know how much to expect. + */ +#define EC_CMD_MOTION_SENSE_CMD 0x002B + +/* Motion sense commands */ +enum motionsense_command { + /* + * Dump command returns all motion sensor data including motion sense + * module flags and individual sensor flags. + */ + MOTIONSENSE_CMD_DUMP = 0, + + /* + * Info command returns data describing the details of a given sensor, + * including enum motionsensor_type, enum motionsensor_location, and + * enum motionsensor_chip. + */ + MOTIONSENSE_CMD_INFO = 1, + + /* + * EC Rate command is a setter/getter command for the EC sampling rate + * in milliseconds. + * It is per sensor, the EC run sample task at the minimum of all + * sensors EC_RATE. + * For sensors without hardware FIFO, EC_RATE should be equals to 1/ODR + * to collect all the sensor samples. + * For sensor with hardware FIFO, EC_RATE is used as the maximal delay + * to process of all motion sensors in milliseconds. + */ + MOTIONSENSE_CMD_EC_RATE = 2, + + /* + * Sensor ODR command is a setter/getter command for the output data + * rate of a specific motion sensor in millihertz. + */ + MOTIONSENSE_CMD_SENSOR_ODR = 3, + + /* + * Sensor range command is a setter/getter command for the range of + * a specified motion sensor in +/-G's or +/- deg/s. + */ + MOTIONSENSE_CMD_SENSOR_RANGE = 4, + + /* + * Setter/getter command for the keyboard wake angle. When the lid + * angle is greater than this value, keyboard wake is disabled in S3, + * and when the lid angle goes less than this value, keyboard wake is + * enabled. Note, the lid angle measurement is an approximate, + * un-calibrated value, hence the wake angle isn't exact. + */ + MOTIONSENSE_CMD_KB_WAKE_ANGLE = 5, + + /* + * Returns a single sensor data. + */ + MOTIONSENSE_CMD_DATA = 6, + + /* + * Return sensor fifo info. + */ + MOTIONSENSE_CMD_FIFO_INFO = 7, + + /* + * Insert a flush element in the fifo and return sensor fifo info. + * The host can use that element to synchronize its operation. + */ + MOTIONSENSE_CMD_FIFO_FLUSH = 8, + + /* + * Return a portion of the fifo. + */ + MOTIONSENSE_CMD_FIFO_READ = 9, + + /* + * Perform low level calibration. + * On sensors that support it, ask to do offset calibration. + */ + MOTIONSENSE_CMD_PERFORM_CALIB = 10, + + /* + * Sensor Offset command is a setter/getter command for the offset + * used for calibration. + * The offsets can be calculated by the host, or via + * PERFORM_CALIB command. + */ + MOTIONSENSE_CMD_SENSOR_OFFSET = 11, + + /* + * List available activities for a MOTION sensor. + * Indicates if they are enabled or disabled. + */ + MOTIONSENSE_CMD_LIST_ACTIVITIES = 12, + + /* + * Activity management + * Enable/Disable activity recognition. + */ + MOTIONSENSE_CMD_SET_ACTIVITY = 13, + + /* + * Lid Angle + */ + MOTIONSENSE_CMD_LID_ANGLE = 14, + + /* + * Allow the FIFO to trigger interrupt via MKBP events. + * By default the FIFO does not send interrupt to process the FIFO + * until the AP is ready or it is coming from a wakeup sensor. + */ + MOTIONSENSE_CMD_FIFO_INT_ENABLE = 15, + + /* + * Spoof the readings of the sensors. The spoofed readings can be set + * to arbitrary values, or will lock to the last read actual values. + */ + MOTIONSENSE_CMD_SPOOF = 16, + + /* Set lid angle for tablet mode detection. */ + MOTIONSENSE_CMD_TABLET_MODE_LID_ANGLE = 17, + + /* + * Sensor Scale command is a setter/getter command for the calibration + * scale. + */ + MOTIONSENSE_CMD_SENSOR_SCALE = 18, + + /* + * Activity management + * Retrieve current status of given activity. + */ + MOTIONSENSE_CMD_GET_ACTIVITY = 20, + + /* Number of motionsense sub-commands. */ + MOTIONSENSE_NUM_CMDS +}; + +/* List of motion sensor types. */ +enum motionsensor_type { + MOTIONSENSE_TYPE_ACCEL = 0, + MOTIONSENSE_TYPE_GYRO = 1, + MOTIONSENSE_TYPE_MAG = 2, + MOTIONSENSE_TYPE_PROX = 3, + MOTIONSENSE_TYPE_LIGHT = 4, + MOTIONSENSE_TYPE_ACTIVITY = 5, + MOTIONSENSE_TYPE_BARO = 6, + MOTIONSENSE_TYPE_SYNC = 7, + MOTIONSENSE_TYPE_MAX, +}; + +/* List of motion sensor locations. */ +enum motionsensor_location { + MOTIONSENSE_LOC_BASE = 0, + MOTIONSENSE_LOC_LID = 1, + MOTIONSENSE_LOC_CAMERA = 2, + MOTIONSENSE_LOC_MAX, +}; + +/* List of motion sensor chips. */ +enum motionsensor_chip { + MOTIONSENSE_CHIP_KXCJ9 = 0, + MOTIONSENSE_CHIP_LSM6DS0 = 1, + MOTIONSENSE_CHIP_BMI160 = 2, + MOTIONSENSE_CHIP_SI1141 = 3, + MOTIONSENSE_CHIP_SI1142 = 4, + MOTIONSENSE_CHIP_SI1143 = 5, + MOTIONSENSE_CHIP_KX022 = 6, + MOTIONSENSE_CHIP_L3GD20H = 7, + MOTIONSENSE_CHIP_BMA255 = 8, + MOTIONSENSE_CHIP_BMP280 = 9, + MOTIONSENSE_CHIP_OPT3001 = 10, + MOTIONSENSE_CHIP_BH1730 = 11, + MOTIONSENSE_CHIP_GPIO = 12, + MOTIONSENSE_CHIP_LIS2DH = 13, + MOTIONSENSE_CHIP_LSM6DSM = 14, + MOTIONSENSE_CHIP_LIS2DE = 15, + MOTIONSENSE_CHIP_LIS2MDL = 16, + MOTIONSENSE_CHIP_LSM6DS3 = 17, + MOTIONSENSE_CHIP_LSM6DSO = 18, + MOTIONSENSE_CHIP_LNG2DM = 19, + MOTIONSENSE_CHIP_MAX, +}; + +/* List of orientation positions */ +enum motionsensor_orientation { + MOTIONSENSE_ORIENTATION_LANDSCAPE = 0, + MOTIONSENSE_ORIENTATION_PORTRAIT = 1, + MOTIONSENSE_ORIENTATION_UPSIDE_DOWN_PORTRAIT = 2, + MOTIONSENSE_ORIENTATION_UPSIDE_DOWN_LANDSCAPE = 3, + MOTIONSENSE_ORIENTATION_UNKNOWN = 4, +}; + +struct ec_response_activity_data { + uint8_t activity; /* motionsensor_activity */ + uint8_t state; +} __ec_todo_packed; + +struct ec_response_motion_sensor_data { + /* Flags for each sensor. */ + uint8_t flags; + /* Sensor number the data comes from. */ + uint8_t sensor_num; + /* Each sensor is up to 3-axis. */ + union { + int16_t data[3]; + struct __ec_todo_packed { + uint16_t reserved; + uint32_t timestamp; + }; + struct __ec_todo_unpacked { + struct ec_response_activity_data activity_data; + int16_t add_info[2]; + }; + }; +} __ec_todo_packed; + +/* Note: used in ec_response_get_next_data */ +struct ec_response_motion_sense_fifo_info { + /* Size of the fifo */ + uint16_t size; + /* Amount of space used in the fifo */ + uint16_t count; + /* Timestamp recorded in us. + * aka accurate timestamp when host event was triggered. + */ + uint32_t timestamp; + /* Total amount of vector lost */ + uint16_t total_lost; + /* Lost events since the last fifo_info, per sensors */ + uint16_t lost[]; +} __ec_todo_packed; + +struct ec_response_motion_sense_fifo_data { + uint32_t number_data; + struct ec_response_motion_sensor_data data[]; +} __ec_todo_packed; + +/* List supported activity recognition */ +enum motionsensor_activity { + MOTIONSENSE_ACTIVITY_RESERVED = 0, + MOTIONSENSE_ACTIVITY_SIG_MOTION = 1, + MOTIONSENSE_ACTIVITY_DOUBLE_TAP = 2, + MOTIONSENSE_ACTIVITY_ORIENTATION = 3, + MOTIONSENSE_ACTIVITY_BODY_DETECTION = 4, +}; + +struct ec_motion_sense_activity { + uint8_t sensor_num; + uint8_t activity; /* one of enum motionsensor_activity */ + uint8_t enable; /* 1: enable, 0: disable */ + uint8_t reserved; + uint16_t parameters[3]; /* activity dependent parameters */ +} __ec_todo_unpacked; + +/* Module flag masks used for the dump sub-command. */ +#define MOTIONSENSE_MODULE_FLAG_ACTIVE BIT(0) + +/* Sensor flag masks used for the dump sub-command. */ +#define MOTIONSENSE_SENSOR_FLAG_PRESENT BIT(0) + +/* + * Flush entry for synchronization. + * data contains time stamp + */ +#define MOTIONSENSE_SENSOR_FLAG_FLUSH BIT(0) +#define MOTIONSENSE_SENSOR_FLAG_TIMESTAMP BIT(1) +#define MOTIONSENSE_SENSOR_FLAG_WAKEUP BIT(2) +#define MOTIONSENSE_SENSOR_FLAG_TABLET_MODE BIT(3) +#define MOTIONSENSE_SENSOR_FLAG_ODR BIT(4) + +/* + * Send this value for the data element to only perform a read. If you + * send any other value, the EC will interpret it as data to set and will + * return the actual value set. + */ +#define EC_MOTION_SENSE_NO_VALUE -1 + +#define EC_MOTION_SENSE_INVALID_CALIB_TEMP 0x8000 + +/* MOTIONSENSE_CMD_SENSOR_OFFSET subcommand flag */ +/* Set Calibration information */ +#define MOTION_SENSE_SET_OFFSET BIT(0) + +/* Default Scale value, factor 1. */ +#define MOTION_SENSE_DEFAULT_SCALE BIT(15) + +#define LID_ANGLE_UNRELIABLE 500 + +enum motionsense_spoof_mode { + /* Disable spoof mode. */ + MOTIONSENSE_SPOOF_MODE_DISABLE = 0, + + /* Enable spoof mode, but use provided component values. */ + MOTIONSENSE_SPOOF_MODE_CUSTOM, + + /* Enable spoof mode, but use the current sensor values. */ + MOTIONSENSE_SPOOF_MODE_LOCK_CURRENT, + + /* Query the current spoof mode status for the sensor. */ + MOTIONSENSE_SPOOF_MODE_QUERY, +}; + +struct ec_params_motion_sense { + uint8_t cmd; + union { + /* Used for MOTIONSENSE_CMD_DUMP. */ + struct __ec_todo_unpacked { + /* + * Maximal number of sensor the host is expecting. + * 0 means the host is only interested in the number + * of sensors controlled by the EC. + */ + uint8_t max_sensor_count; + } dump; + + /* + * Used for MOTIONSENSE_CMD_KB_WAKE_ANGLE. + */ + struct __ec_todo_unpacked { + /* Data to set or EC_MOTION_SENSE_NO_VALUE to read. + * kb_wake_angle: angle to wakup AP. + */ + int16_t data; + } kb_wake_angle; + + /* + * Used for MOTIONSENSE_CMD_INFO, MOTIONSENSE_CMD_DATA + * and MOTIONSENSE_CMD_PERFORM_CALIB. + */ + struct __ec_todo_unpacked { + uint8_t sensor_num; + } info, info_3, data, fifo_flush, perform_calib, + list_activities; + + /* + * Used for MOTIONSENSE_CMD_EC_RATE, MOTIONSENSE_CMD_SENSOR_ODR + * and MOTIONSENSE_CMD_SENSOR_RANGE. + */ + struct __ec_todo_unpacked { + uint8_t sensor_num; + + /* Rounding flag, true for round-up, false for down. */ + uint8_t roundup; + + uint16_t reserved; + + /* Data to set or EC_MOTION_SENSE_NO_VALUE to read. */ + int32_t data; + } ec_rate, sensor_odr, sensor_range; + + /* Used for MOTIONSENSE_CMD_SENSOR_OFFSET */ + struct __ec_todo_packed { + uint8_t sensor_num; + + /* + * bit 0: If set (MOTION_SENSE_SET_OFFSET), set + * the calibration information in the EC. + * If unset, just retrieve calibration information. + */ + uint16_t flags; + + /* + * Temperature at calibration, in units of 0.01 C + * 0x8000: invalid / unknown. + * 0x0: 0C + * 0x7fff: +327.67C + */ + int16_t temp; + + /* + * Offset for calibration. + * Unit: + * Accelerometer: 1/1024 g + * Gyro: 1/1024 deg/s + * Compass: 1/16 uT + */ + int16_t offset[3]; + } sensor_offset; + + /* Used for MOTIONSENSE_CMD_SENSOR_SCALE */ + struct __ec_todo_packed { + uint8_t sensor_num; + + /* + * bit 0: If set (MOTION_SENSE_SET_OFFSET), set + * the calibration information in the EC. + * If unset, just retrieve calibration information. + */ + uint16_t flags; + + /* + * Temperature at calibration, in units of 0.01 C + * 0x8000: invalid / unknown. + * 0x0: 0C + * 0x7fff: +327.67C + */ + int16_t temp; + + /* + * Scale for calibration: + * By default scale is 1, it is encoded on 16bits: + * 1 = BIT(15) + * ~2 = 0xFFFF + * ~0 = 0. + */ + uint16_t scale[3]; + } sensor_scale; + + + /* Used for MOTIONSENSE_CMD_FIFO_INFO */ + /* (no params) */ + + /* Used for MOTIONSENSE_CMD_FIFO_READ */ + struct __ec_todo_unpacked { + /* + * Number of expected vector to return. + * EC may return less or 0 if none available. + */ + uint32_t max_data_vector; + } fifo_read; + + /* Used for MOTIONSENSE_CMD_SET_ACTIVITY */ + struct ec_motion_sense_activity set_activity; + + /* Used for MOTIONSENSE_CMD_LID_ANGLE */ + /* (no params) */ + + /* Used for MOTIONSENSE_CMD_FIFO_INT_ENABLE */ + struct __ec_todo_unpacked { + /* + * 1: enable, 0 disable fifo, + * EC_MOTION_SENSE_NO_VALUE return value. + */ + int8_t enable; + } fifo_int_enable; + + /* Used for MOTIONSENSE_CMD_SPOOF */ + struct __ec_todo_packed { + uint8_t sensor_id; + + /* See enum motionsense_spoof_mode. */ + uint8_t spoof_enable; + + /* Ignored, used for alignment. */ + uint8_t reserved; + + /* Individual component values to spoof. */ + int16_t components[3]; + } spoof; + + /* Used for MOTIONSENSE_CMD_TABLET_MODE_LID_ANGLE. */ + struct __ec_todo_unpacked { + /* + * Lid angle threshold for switching between tablet and + * clamshell mode. + */ + int16_t lid_angle; + + /* + * Hysteresis degree to prevent fluctuations between + * clamshell and tablet mode if lid angle keeps + * changing around the threshold. Lid motion driver will + * use lid_angle + hys_degree to trigger tablet mode and + * lid_angle - hys_degree to trigger clamshell mode. + */ + int16_t hys_degree; + } tablet_mode_threshold; + + /* Used for MOTIONSENSE_CMD_GET_ACTIVITY */ + struct __ec_todo_unpacked { + uint8_t sensor_num; + uint8_t activity; /* enum motionsensor_activity */ + } get_activity; + }; +} __ec_todo_packed; + +struct ec_response_motion_sense { + union { + /* Used for MOTIONSENSE_CMD_DUMP */ + struct __ec_todo_unpacked { + /* Flags representing the motion sensor module. */ + uint8_t module_flags; + + /* Number of sensors managed directly by the EC. */ + uint8_t sensor_count; + + /* + * Sensor data is truncated if response_max is too small + * for holding all the data. + */ + DECLARE_FLEX_ARRAY(struct ec_response_motion_sensor_data, sensor); + } dump; + + /* Used for MOTIONSENSE_CMD_INFO. */ + struct __ec_todo_unpacked { + /* Should be element of enum motionsensor_type. */ + uint8_t type; + + /* Should be element of enum motionsensor_location. */ + uint8_t location; + + /* Should be element of enum motionsensor_chip. */ + uint8_t chip; + } info; + + /* Used for MOTIONSENSE_CMD_INFO version 3 */ + struct __ec_todo_unpacked { + /* Should be element of enum motionsensor_type. */ + uint8_t type; + + /* Should be element of enum motionsensor_location. */ + uint8_t location; + + /* Should be element of enum motionsensor_chip. */ + uint8_t chip; + + /* Minimum sensor sampling frequency */ + uint32_t min_frequency; + + /* Maximum sensor sampling frequency */ + uint32_t max_frequency; + + /* Max number of sensor events that could be in fifo */ + uint32_t fifo_max_event_count; + } info_3; + + /* Used for MOTIONSENSE_CMD_DATA */ + struct ec_response_motion_sensor_data data; + + /* + * Used for MOTIONSENSE_CMD_EC_RATE, MOTIONSENSE_CMD_SENSOR_ODR, + * MOTIONSENSE_CMD_SENSOR_RANGE, + * MOTIONSENSE_CMD_KB_WAKE_ANGLE, + * MOTIONSENSE_CMD_FIFO_INT_ENABLE and + * MOTIONSENSE_CMD_SPOOF. + */ + struct __ec_todo_unpacked { + /* Current value of the parameter queried. */ + int32_t ret; + } ec_rate, sensor_odr, sensor_range, kb_wake_angle, + fifo_int_enable, spoof; + + /* + * Used for MOTIONSENSE_CMD_SENSOR_OFFSET, + * PERFORM_CALIB. + */ + struct __ec_todo_unpacked { + int16_t temp; + int16_t offset[3]; + } sensor_offset, perform_calib; + + /* Used for MOTIONSENSE_CMD_SENSOR_SCALE */ + struct __ec_todo_unpacked { + int16_t temp; + uint16_t scale[3]; + } sensor_scale; + + struct ec_response_motion_sense_fifo_info fifo_info, fifo_flush; + + struct ec_response_motion_sense_fifo_data fifo_read; + + struct __ec_todo_packed { + uint16_t reserved; + uint32_t enabled; + uint32_t disabled; + } list_activities; + + /* No params for set activity */ + + /* Used for MOTIONSENSE_CMD_LID_ANGLE */ + struct __ec_todo_unpacked { + /* + * Angle between 0 and 360 degree if available, + * LID_ANGLE_UNRELIABLE otherwise. + */ + uint16_t value; + } lid_angle; + + /* Used for MOTIONSENSE_CMD_TABLET_MODE_LID_ANGLE. */ + struct __ec_todo_unpacked { + /* + * Lid angle threshold for switching between tablet and + * clamshell mode. + */ + uint16_t lid_angle; + + /* Hysteresis degree. */ + uint16_t hys_degree; + } tablet_mode_threshold; + + /* USED for MOTIONSENSE_CMD_GET_ACTIVITY. */ + struct __ec_todo_unpacked { + uint8_t state; + } get_activity; + }; +} __ec_todo_packed; + +/*****************************************************************************/ +/* Force lid open command */ + +/* Make lid event always open */ +#define EC_CMD_FORCE_LID_OPEN 0x002C + +struct ec_params_force_lid_open { + uint8_t enabled; +} __ec_align1; + +/*****************************************************************************/ +/* Configure the behavior of the power button */ +#define EC_CMD_CONFIG_POWER_BUTTON 0x002D + +enum ec_config_power_button_flags { + /* Enable/Disable power button pulses for x86 devices */ + EC_POWER_BUTTON_ENABLE_PULSE = BIT(0), +}; + +struct ec_params_config_power_button { + /* See enum ec_config_power_button_flags */ + uint8_t flags; +} __ec_align1; + +/*****************************************************************************/ +/* USB charging control commands */ + +/* Set USB port charging mode */ +#define EC_CMD_USB_CHARGE_SET_MODE 0x0030 + +struct ec_params_usb_charge_set_mode { + uint8_t usb_port_id; + uint8_t mode:7; + uint8_t inhibit_charge:1; +} __ec_align1; + +/*****************************************************************************/ +/* Persistent storage for host */ + +/* Maximum bytes that can be read/written in a single command */ +#define EC_PSTORE_SIZE_MAX 64 + +/* Get persistent storage info */ +#define EC_CMD_PSTORE_INFO 0x0040 + +struct ec_response_pstore_info { + /* Persistent storage size, in bytes */ + uint32_t pstore_size; + /* Access size; read/write offset and size must be a multiple of this */ + uint32_t access_size; +} __ec_align4; + +/* + * Read persistent storage + * + * Response is params.size bytes of data. + */ +#define EC_CMD_PSTORE_READ 0x0041 + +struct ec_params_pstore_read { + uint32_t offset; /* Byte offset to read */ + uint32_t size; /* Size to read in bytes */ +} __ec_align4; + +/* Write persistent storage */ +#define EC_CMD_PSTORE_WRITE 0x0042 + +struct ec_params_pstore_write { + uint32_t offset; /* Byte offset to write */ + uint32_t size; /* Size to write in bytes */ + uint8_t data[EC_PSTORE_SIZE_MAX]; +} __ec_align4; + +/*****************************************************************************/ +/* Real-time clock */ + +/* RTC params and response structures */ +struct ec_params_rtc { + uint32_t time; +} __ec_align4; + +struct ec_response_rtc { + uint32_t time; +} __ec_align4; + +/* These use ec_response_rtc */ +#define EC_CMD_RTC_GET_VALUE 0x0044 +#define EC_CMD_RTC_GET_ALARM 0x0045 + +/* These all use ec_params_rtc */ +#define EC_CMD_RTC_SET_VALUE 0x0046 +#define EC_CMD_RTC_SET_ALARM 0x0047 + +/* Pass as time param to SET_ALARM to clear the current alarm */ +#define EC_RTC_ALARM_CLEAR 0 + +/*****************************************************************************/ +/* Port80 log access */ + +/* Maximum entries that can be read/written in a single command */ +#define EC_PORT80_SIZE_MAX 32 + +/* Get last port80 code from previous boot */ +#define EC_CMD_PORT80_LAST_BOOT 0x0048 +#define EC_CMD_PORT80_READ 0x0048 + +enum ec_port80_subcmd { + EC_PORT80_GET_INFO = 0, + EC_PORT80_READ_BUFFER, +}; + +struct ec_params_port80_read { + uint16_t subcmd; + union { + struct __ec_todo_unpacked { + uint32_t offset; + uint32_t num_entries; + } read_buffer; + }; +} __ec_todo_packed; + +struct ec_response_port80_read { + union { + struct __ec_todo_unpacked { + uint32_t writes; + uint32_t history_size; + uint32_t last_boot; + } get_info; + struct __ec_todo_unpacked { + uint16_t codes[EC_PORT80_SIZE_MAX]; + } data; + }; +} __ec_todo_packed; + +struct ec_response_port80_last_boot { + uint16_t code; +} __ec_align2; + +/*****************************************************************************/ +/* Temporary secure storage for host verified boot use */ + +/* Number of bytes in a vstore slot */ +#define EC_VSTORE_SLOT_SIZE 64 + +/* Maximum number of vstore slots */ +#define EC_VSTORE_SLOT_MAX 32 + +/* Get persistent storage info */ +#define EC_CMD_VSTORE_INFO 0x0049 +struct ec_response_vstore_info { + /* Indicates which slots are locked */ + uint32_t slot_locked; + /* Total number of slots available */ + uint8_t slot_count; +} __ec_align_size1; + +/* + * Read temporary secure storage + * + * Response is EC_VSTORE_SLOT_SIZE bytes of data. + */ +#define EC_CMD_VSTORE_READ 0x004A + +struct ec_params_vstore_read { + uint8_t slot; /* Slot to read from */ +} __ec_align1; + +struct ec_response_vstore_read { + uint8_t data[EC_VSTORE_SLOT_SIZE]; +} __ec_align1; + +/* + * Write temporary secure storage and lock it. + */ +#define EC_CMD_VSTORE_WRITE 0x004B + +struct ec_params_vstore_write { + uint8_t slot; /* Slot to write to */ + uint8_t data[EC_VSTORE_SLOT_SIZE]; +} __ec_align1; + +/*****************************************************************************/ +/* Thermal engine commands. Note that there are two implementations. We'll + * reuse the command number, but the data and behavior is incompatible. + * Version 0 is what originally shipped on Link. + * Version 1 separates the CPU thermal limits from the fan control. + */ + +#define EC_CMD_THERMAL_SET_THRESHOLD 0x0050 +#define EC_CMD_THERMAL_GET_THRESHOLD 0x0051 + +/* The version 0 structs are opaque. You have to know what they are for + * the get/set commands to make any sense. + */ + +/* Version 0 - set */ +struct ec_params_thermal_set_threshold { + uint8_t sensor_type; + uint8_t threshold_id; + uint16_t value; +} __ec_align2; + +/* Version 0 - get */ +struct ec_params_thermal_get_threshold { + uint8_t sensor_type; + uint8_t threshold_id; +} __ec_align1; + +struct ec_response_thermal_get_threshold { + uint16_t value; +} __ec_align2; + + +/* The version 1 structs are visible. */ +enum ec_temp_thresholds { + EC_TEMP_THRESH_WARN = 0, + EC_TEMP_THRESH_HIGH, + EC_TEMP_THRESH_HALT, + + EC_TEMP_THRESH_COUNT +}; + +/* + * Thermal configuration for one temperature sensor. Temps are in degrees K. + * Zero values will be silently ignored by the thermal task. + * + * Set 'temp_host' value allows thermal task to trigger some event with 1 degree + * hysteresis. + * For example, + * temp_host[EC_TEMP_THRESH_HIGH] = 300 K + * temp_host_release[EC_TEMP_THRESH_HIGH] = 0 K + * EC will throttle ap when temperature >= 301 K, and release throttling when + * temperature <= 299 K. + * + * Set 'temp_host_release' value allows thermal task has a custom hysteresis. + * For example, + * temp_host[EC_TEMP_THRESH_HIGH] = 300 K + * temp_host_release[EC_TEMP_THRESH_HIGH] = 295 K + * EC will throttle ap when temperature >= 301 K, and release throttling when + * temperature <= 294 K. + * + * Note that this structure is a sub-structure of + * ec_params_thermal_set_threshold_v1, but maintains its alignment there. + */ +struct ec_thermal_config { + uint32_t temp_host[EC_TEMP_THRESH_COUNT]; /* levels of hotness */ + uint32_t temp_host_release[EC_TEMP_THRESH_COUNT]; /* release levels */ + uint32_t temp_fan_off; /* no active cooling needed */ + uint32_t temp_fan_max; /* max active cooling needed */ +} __ec_align4; + +/* Version 1 - get config for one sensor. */ +struct ec_params_thermal_get_threshold_v1 { + uint32_t sensor_num; +} __ec_align4; +/* This returns a struct ec_thermal_config */ + +/* + * Version 1 - set config for one sensor. + * Use read-modify-write for best results! + */ +struct ec_params_thermal_set_threshold_v1 { + uint32_t sensor_num; + struct ec_thermal_config cfg; +} __ec_align4; +/* This returns no data */ + +/****************************************************************************/ + +/* Set or get fan control mode */ +#define EC_CMD_THERMAL_AUTO_FAN_CTRL 0x0052 + +enum ec_auto_fan_ctrl_cmd { + EC_AUTO_FAN_CONTROL_CMD_SET = 0, + EC_AUTO_FAN_CONTROL_CMD_GET, +}; + +/* Version 1 of input params */ +struct ec_params_auto_fan_ctrl_v1 { + uint8_t fan_idx; +} __ec_align1; + +/* Version 2 of input params */ +struct ec_params_auto_fan_ctrl_v2 { + uint8_t fan_idx; + uint8_t cmd; /* enum ec_auto_fan_ctrl_cmd */ + uint8_t set_auto; /* only used with EC_AUTO_FAN_CONTROL_CMD_SET - bool + */ +} __ec_align4; + +struct ec_response_auto_fan_control { + uint8_t is_auto; /* bool */ +} __ec_align1; + +/* Get/Set TMP006 calibration data */ +#define EC_CMD_TMP006_GET_CALIBRATION 0x0053 +#define EC_CMD_TMP006_SET_CALIBRATION 0x0054 + +/* + * The original TMP006 calibration only needed four params, but now we need + * more. Since the algorithm is nothing but magic numbers anyway, we'll leave + * the params opaque. The v1 "get" response will include the algorithm number + * and how many params it requires. That way we can change the EC code without + * needing to update this file. We can also use a different algorithm on each + * sensor. + */ + +/* This is the same struct for both v0 and v1. */ +struct ec_params_tmp006_get_calibration { + uint8_t index; +} __ec_align1; + +/* Version 0 */ +struct ec_response_tmp006_get_calibration_v0 { + float s0; + float b0; + float b1; + float b2; +} __ec_align4; + +struct ec_params_tmp006_set_calibration_v0 { + uint8_t index; + uint8_t reserved[3]; + float s0; + float b0; + float b1; + float b2; +} __ec_align4; + +/* Version 1 */ +struct ec_response_tmp006_get_calibration_v1 { + uint8_t algorithm; + uint8_t num_params; + uint8_t reserved[2]; + float val[]; +} __ec_align4; + +struct ec_params_tmp006_set_calibration_v1 { + uint8_t index; + uint8_t algorithm; + uint8_t num_params; + uint8_t reserved; + float val[]; +} __ec_align4; + + +/* Read raw TMP006 data */ +#define EC_CMD_TMP006_GET_RAW 0x0055 + +struct ec_params_tmp006_get_raw { + uint8_t index; +} __ec_align1; + +struct ec_response_tmp006_get_raw { + int32_t t; /* In 1/100 K */ + int32_t v; /* In nV */ +} __ec_align4; + +/*****************************************************************************/ +/* MKBP - Matrix KeyBoard Protocol */ + +/* + * Read key state + * + * Returns raw data for keyboard cols; see ec_response_mkbp_info.cols for + * expected response size. + * + * NOTE: This has been superseded by EC_CMD_MKBP_GET_NEXT_EVENT. If you wish + * to obtain the instantaneous state, use EC_CMD_MKBP_INFO with the type + * EC_MKBP_INFO_CURRENT and event EC_MKBP_EVENT_KEY_MATRIX. + */ +#define EC_CMD_MKBP_STATE 0x0060 + +/* + * Provide information about various MKBP things. See enum ec_mkbp_info_type. + */ +#define EC_CMD_MKBP_INFO 0x0061 + +struct ec_response_mkbp_info { + uint32_t rows; + uint32_t cols; + /* Formerly "switches", which was 0. */ + uint8_t reserved; +} __ec_align_size1; + +struct ec_params_mkbp_info { + uint8_t info_type; + uint8_t event_type; +} __ec_align1; + +enum ec_mkbp_info_type { + /* + * Info about the keyboard matrix: number of rows and columns. + * + * Returns struct ec_response_mkbp_info. + */ + EC_MKBP_INFO_KBD = 0, + + /* + * For buttons and switches, info about which specifically are + * supported. event_type must be set to one of the values in enum + * ec_mkbp_event. + * + * For EC_MKBP_EVENT_BUTTON and EC_MKBP_EVENT_SWITCH, returns a 4 byte + * bitmask indicating which buttons or switches are present. See the + * bit inidices below. + */ + EC_MKBP_INFO_SUPPORTED = 1, + + /* + * Instantaneous state of buttons and switches. + * + * event_type must be set to one of the values in enum ec_mkbp_event. + * + * For EC_MKBP_EVENT_KEY_MATRIX, returns uint8_t key_matrix[13] + * indicating the current state of the keyboard matrix. + * + * For EC_MKBP_EVENT_HOST_EVENT, return uint32_t host_event, the raw + * event state. + * + * For EC_MKBP_EVENT_BUTTON, returns uint32_t buttons, indicating the + * state of supported buttons. + * + * For EC_MKBP_EVENT_SWITCH, returns uint32_t switches, indicating the + * state of supported switches. + */ + EC_MKBP_INFO_CURRENT = 2, +}; + +/* Simulate key press */ +#define EC_CMD_MKBP_SIMULATE_KEY 0x0062 + +struct ec_params_mkbp_simulate_key { + uint8_t col; + uint8_t row; + uint8_t pressed; +} __ec_align1; + +#define EC_CMD_GET_KEYBOARD_ID 0x0063 + +struct ec_response_keyboard_id { + uint32_t keyboard_id; +} __ec_align4; + +enum keyboard_id { + KEYBOARD_ID_UNSUPPORTED = 0, + KEYBOARD_ID_UNREADABLE = 0xffffffff, +}; + +/* Configure keyboard scanning */ +#define EC_CMD_MKBP_SET_CONFIG 0x0064 +#define EC_CMD_MKBP_GET_CONFIG 0x0065 + +/* flags */ +enum mkbp_config_flags { + EC_MKBP_FLAGS_ENABLE = 1, /* Enable keyboard scanning */ +}; + +enum mkbp_config_valid { + EC_MKBP_VALID_SCAN_PERIOD = BIT(0), + EC_MKBP_VALID_POLL_TIMEOUT = BIT(1), + EC_MKBP_VALID_MIN_POST_SCAN_DELAY = BIT(3), + EC_MKBP_VALID_OUTPUT_SETTLE = BIT(4), + EC_MKBP_VALID_DEBOUNCE_DOWN = BIT(5), + EC_MKBP_VALID_DEBOUNCE_UP = BIT(6), + EC_MKBP_VALID_FIFO_MAX_DEPTH = BIT(7), +}; + +/* + * Configuration for our key scanning algorithm. + * + * Note that this is used as a sub-structure of + * ec_{params/response}_mkbp_get_config. + */ +struct ec_mkbp_config { + uint32_t valid_mask; /* valid fields */ + uint8_t flags; /* some flags (enum mkbp_config_flags) */ + uint8_t valid_flags; /* which flags are valid */ + uint16_t scan_period_us; /* period between start of scans */ + /* revert to interrupt mode after no activity for this long */ + uint32_t poll_timeout_us; + /* + * minimum post-scan relax time. Once we finish a scan we check + * the time until we are due to start the next one. If this time is + * shorter this field, we use this instead. + */ + uint16_t min_post_scan_delay_us; + /* delay between setting up output and waiting for it to settle */ + uint16_t output_settle_us; + uint16_t debounce_down_us; /* time for debounce on key down */ + uint16_t debounce_up_us; /* time for debounce on key up */ + /* maximum depth to allow for fifo (0 = no keyscan output) */ + uint8_t fifo_max_depth; +} __ec_align_size1; + +struct ec_params_mkbp_set_config { + struct ec_mkbp_config config; +} __ec_align_size1; + +struct ec_response_mkbp_get_config { + struct ec_mkbp_config config; +} __ec_align_size1; + +/* Run the key scan emulation */ +#define EC_CMD_KEYSCAN_SEQ_CTRL 0x0066 + +enum ec_keyscan_seq_cmd { + EC_KEYSCAN_SEQ_STATUS = 0, /* Get status information */ + EC_KEYSCAN_SEQ_CLEAR = 1, /* Clear sequence */ + EC_KEYSCAN_SEQ_ADD = 2, /* Add item to sequence */ + EC_KEYSCAN_SEQ_START = 3, /* Start running sequence */ + EC_KEYSCAN_SEQ_COLLECT = 4, /* Collect sequence summary data */ +}; + +enum ec_collect_flags { + /* + * Indicates this scan was processed by the EC. Due to timing, some + * scans may be skipped. + */ + EC_KEYSCAN_SEQ_FLAG_DONE = BIT(0), +}; + +struct ec_collect_item { + uint8_t flags; /* some flags (enum ec_collect_flags) */ +} __ec_align1; + +struct ec_params_keyscan_seq_ctrl { + uint8_t cmd; /* Command to send (enum ec_keyscan_seq_cmd) */ + union { + struct __ec_align1 { + uint8_t active; /* still active */ + uint8_t num_items; /* number of items */ + /* Current item being presented */ + uint8_t cur_item; + } status; + struct __ec_todo_unpacked { + /* + * Absolute time for this scan, measured from the + * start of the sequence. + */ + uint32_t time_us; + uint8_t scan[0]; /* keyscan data */ + } add; + struct __ec_align1 { + uint8_t start_item; /* First item to return */ + uint8_t num_items; /* Number of items to return */ + } collect; + }; +} __ec_todo_packed; + +struct ec_result_keyscan_seq_ctrl { + union { + struct __ec_todo_unpacked { + uint8_t num_items; /* Number of items */ + /* Data for each item */ + struct ec_collect_item item[0]; + } collect; + }; +} __ec_todo_packed; + +/* + * Get the next pending MKBP event. + * + * Returns EC_RES_UNAVAILABLE if there is no event pending. + */ +#define EC_CMD_GET_NEXT_EVENT 0x0067 + +#define EC_MKBP_HAS_MORE_EVENTS_SHIFT 7 + +/* + * We use the most significant bit of the event type to indicate to the host + * that the EC has more MKBP events available to provide. + */ +#define EC_MKBP_HAS_MORE_EVENTS BIT(EC_MKBP_HAS_MORE_EVENTS_SHIFT) + +/* The mask to apply to get the raw event type */ +#define EC_MKBP_EVENT_TYPE_MASK (BIT(EC_MKBP_HAS_MORE_EVENTS_SHIFT) - 1) + +enum ec_mkbp_event { + /* Keyboard matrix changed. The event data is the new matrix state. */ + EC_MKBP_EVENT_KEY_MATRIX = 0, + + /* New host event. The event data is 4 bytes of host event flags. */ + EC_MKBP_EVENT_HOST_EVENT = 1, + + /* New Sensor FIFO data. The event data is fifo_info structure. */ + EC_MKBP_EVENT_SENSOR_FIFO = 2, + + /* The state of the non-matrixed buttons have changed. */ + EC_MKBP_EVENT_BUTTON = 3, + + /* The state of the switches have changed. */ + EC_MKBP_EVENT_SWITCH = 4, + + /* New Fingerprint sensor event, the event data is fp_events bitmap. */ + EC_MKBP_EVENT_FINGERPRINT = 5, + + /* + * Sysrq event: send emulated sysrq. The event data is sysrq, + * corresponding to the key to be pressed. + */ + EC_MKBP_EVENT_SYSRQ = 6, + + /* + * New 64-bit host event. + * The event data is 8 bytes of host event flags. + */ + EC_MKBP_EVENT_HOST_EVENT64 = 7, + + /* Notify the AP that something happened on CEC */ + EC_MKBP_EVENT_CEC_EVENT = 8, + + /* Send an incoming CEC message to the AP */ + EC_MKBP_EVENT_CEC_MESSAGE = 9, + + /* Peripheral device charger event */ + EC_MKBP_EVENT_PCHG = 12, + + /* Number of MKBP events */ + EC_MKBP_EVENT_COUNT, +}; +BUILD_ASSERT(EC_MKBP_EVENT_COUNT <= EC_MKBP_EVENT_TYPE_MASK); + +union __ec_align_offset1 ec_response_get_next_data { + uint8_t key_matrix[13]; + + /* Unaligned */ + uint32_t host_event; + uint64_t host_event64; + + struct __ec_todo_unpacked { + /* For aligning the fifo_info */ + uint8_t reserved[3]; + struct ec_response_motion_sense_fifo_info info; + } sensor_fifo; + + uint32_t buttons; + + uint32_t switches; + + uint32_t fp_events; + + uint32_t sysrq; + + /* CEC events from enum mkbp_cec_event */ + uint32_t cec_events; +}; + +union __ec_align_offset1 ec_response_get_next_data_v1 { + uint8_t key_matrix[16]; + + /* Unaligned */ + uint32_t host_event; + uint64_t host_event64; + + struct __ec_todo_unpacked { + /* For aligning the fifo_info */ + uint8_t reserved[3]; + struct ec_response_motion_sense_fifo_info info; + } sensor_fifo; + + uint32_t buttons; + + uint32_t switches; + + uint32_t fp_events; + + uint32_t sysrq; + + /* CEC events from enum mkbp_cec_event */ + uint32_t cec_events; + + uint8_t cec_message[16]; +}; +BUILD_ASSERT(sizeof(union ec_response_get_next_data_v1) == 16); + +union __ec_align_offset1 ec_response_get_next_data_v3 { + uint8_t key_matrix[18]; + + /* Unaligned */ + uint32_t host_event; + uint64_t host_event64; + + struct __ec_todo_unpacked { + /* For aligning the fifo_info */ + uint8_t reserved[3]; + struct ec_response_motion_sense_fifo_info info; + } sensor_fifo; + + uint32_t buttons; + + uint32_t switches; + + uint32_t fp_events; + + uint32_t sysrq; + + /* CEC events from enum mkbp_cec_event */ + uint32_t cec_events; + + uint8_t cec_message[16]; +}; +BUILD_ASSERT(sizeof(union ec_response_get_next_data_v3) == 18); + +struct ec_response_get_next_event { + uint8_t event_type; + /* Followed by event data if any */ + union ec_response_get_next_data data; +} __ec_align1; + +struct ec_response_get_next_event_v1 { + uint8_t event_type; + /* Followed by event data if any */ + union ec_response_get_next_data_v1 data; +} __ec_align1; + +struct ec_response_get_next_event_v3 { + uint8_t event_type; + /* Followed by event data if any */ + union ec_response_get_next_data_v3 data; +} __ec_align1; + +/* Bit indices for buttons and switches.*/ +/* Buttons */ +#define EC_MKBP_POWER_BUTTON 0 +#define EC_MKBP_VOL_UP 1 +#define EC_MKBP_VOL_DOWN 2 +#define EC_MKBP_RECOVERY 3 +#define EC_MKBP_BRI_UP 4 +#define EC_MKBP_BRI_DOWN 5 +#define EC_MKBP_SCREEN_LOCK 6 + +/* Switches */ +#define EC_MKBP_LID_OPEN 0 +#define EC_MKBP_TABLET_MODE 1 +#define EC_MKBP_BASE_ATTACHED 2 +#define EC_MKBP_FRONT_PROXIMITY 3 + +/* Run keyboard factory test scanning */ +#define EC_CMD_KEYBOARD_FACTORY_TEST 0x0068 + +struct ec_response_keyboard_factory_test { + uint16_t shorted; /* Keyboard pins are shorted */ +} __ec_align2; + +/* Fingerprint events in 'fp_events' for EC_MKBP_EVENT_FINGERPRINT */ +#define EC_MKBP_FP_RAW_EVENT(fp_events) ((fp_events) & 0x00FFFFFF) +#define EC_MKBP_FP_ERRCODE(fp_events) ((fp_events) & 0x0000000F) +#define EC_MKBP_FP_ENROLL_PROGRESS_OFFSET 4 +#define EC_MKBP_FP_ENROLL_PROGRESS(fpe) (((fpe) & 0x00000FF0) \ + >> EC_MKBP_FP_ENROLL_PROGRESS_OFFSET) +#define EC_MKBP_FP_MATCH_IDX_OFFSET 12 +#define EC_MKBP_FP_MATCH_IDX_MASK 0x0000F000 +#define EC_MKBP_FP_MATCH_IDX(fpe) (((fpe) & EC_MKBP_FP_MATCH_IDX_MASK) \ + >> EC_MKBP_FP_MATCH_IDX_OFFSET) +#define EC_MKBP_FP_ENROLL BIT(27) +#define EC_MKBP_FP_MATCH BIT(28) +#define EC_MKBP_FP_FINGER_DOWN BIT(29) +#define EC_MKBP_FP_FINGER_UP BIT(30) +#define EC_MKBP_FP_IMAGE_READY BIT(31) +/* code given by EC_MKBP_FP_ERRCODE() when EC_MKBP_FP_ENROLL is set */ +#define EC_MKBP_FP_ERR_ENROLL_OK 0 +#define EC_MKBP_FP_ERR_ENROLL_LOW_QUALITY 1 +#define EC_MKBP_FP_ERR_ENROLL_IMMOBILE 2 +#define EC_MKBP_FP_ERR_ENROLL_LOW_COVERAGE 3 +#define EC_MKBP_FP_ERR_ENROLL_INTERNAL 5 +/* Can be used to detect if image was usable for enrollment or not. */ +#define EC_MKBP_FP_ERR_ENROLL_PROBLEM_MASK 1 +/* code given by EC_MKBP_FP_ERRCODE() when EC_MKBP_FP_MATCH is set */ +#define EC_MKBP_FP_ERR_MATCH_NO 0 +#define EC_MKBP_FP_ERR_MATCH_NO_INTERNAL 6 +#define EC_MKBP_FP_ERR_MATCH_NO_TEMPLATES 7 +#define EC_MKBP_FP_ERR_MATCH_NO_LOW_QUALITY 2 +#define EC_MKBP_FP_ERR_MATCH_NO_LOW_COVERAGE 4 +#define EC_MKBP_FP_ERR_MATCH_YES 1 +#define EC_MKBP_FP_ERR_MATCH_YES_UPDATED 3 +#define EC_MKBP_FP_ERR_MATCH_YES_UPDATE_FAILED 5 + + +/*****************************************************************************/ +/* Temperature sensor commands */ + +/* Read temperature sensor info */ +#define EC_CMD_TEMP_SENSOR_GET_INFO 0x0070 + +struct ec_params_temp_sensor_get_info { + uint8_t id; +} __ec_align1; + +struct ec_response_temp_sensor_get_info { + char sensor_name[32]; + uint8_t sensor_type; +} __ec_align1; + +/*****************************************************************************/ + +/* + * Note: host commands 0x80 - 0x87 are reserved to avoid conflict with ACPI + * commands accidentally sent to the wrong interface. See the ACPI section + * below. + */ + +/*****************************************************************************/ +/* Host event commands */ + + +/* Obsolete. New implementation should use EC_CMD_HOST_EVENT instead */ +/* + * Host event mask params and response structures, shared by all of the host + * event commands below. + */ +struct ec_params_host_event_mask { + uint32_t mask; +} __ec_align4; + +struct ec_response_host_event_mask { + uint32_t mask; +} __ec_align4; + +/* These all use ec_response_host_event_mask */ +#define EC_CMD_HOST_EVENT_GET_B 0x0087 +#define EC_CMD_HOST_EVENT_GET_SMI_MASK 0x0088 +#define EC_CMD_HOST_EVENT_GET_SCI_MASK 0x0089 +#define EC_CMD_HOST_EVENT_GET_WAKE_MASK 0x008D + +/* These all use ec_params_host_event_mask */ +#define EC_CMD_HOST_EVENT_SET_SMI_MASK 0x008A +#define EC_CMD_HOST_EVENT_SET_SCI_MASK 0x008B +#define EC_CMD_HOST_EVENT_CLEAR 0x008C +#define EC_CMD_HOST_EVENT_SET_WAKE_MASK 0x008E +#define EC_CMD_HOST_EVENT_CLEAR_B 0x008F + +/* + * Unified host event programming interface - Should be used by newer versions + * of BIOS/OS to program host events and masks + */ + +struct ec_params_host_event { + + /* Action requested by host - one of enum ec_host_event_action. */ + uint8_t action; + + /* + * Mask type that the host requested the action on - one of + * enum ec_host_event_mask_type. + */ + uint8_t mask_type; + + /* Set to 0, ignore on read */ + uint16_t reserved; + + /* Value to be used in case of set operations. */ + uint64_t value; +} __ec_align4; + +/* + * Response structure returned by EC_CMD_HOST_EVENT. + * Update the value on a GET request. Set to 0 on GET/CLEAR + */ + +struct ec_response_host_event { + + /* Mask value in case of get operation */ + uint64_t value; +} __ec_align4; + +enum ec_host_event_action { + /* + * params.value is ignored. Value of mask_type populated + * in response.value + */ + EC_HOST_EVENT_GET, + + /* Bits in params.value are set */ + EC_HOST_EVENT_SET, + + /* Bits in params.value are cleared */ + EC_HOST_EVENT_CLEAR, +}; + +enum ec_host_event_mask_type { + + /* Main host event copy */ + EC_HOST_EVENT_MAIN, + + /* Copy B of host events */ + EC_HOST_EVENT_B, + + /* SCI Mask */ + EC_HOST_EVENT_SCI_MASK, + + /* SMI Mask */ + EC_HOST_EVENT_SMI_MASK, + + /* Mask of events that should be always reported in hostevents */ + EC_HOST_EVENT_ALWAYS_REPORT_MASK, + + /* Active wake mask */ + EC_HOST_EVENT_ACTIVE_WAKE_MASK, + + /* Lazy wake mask for S0ix */ + EC_HOST_EVENT_LAZY_WAKE_MASK_S0IX, + + /* Lazy wake mask for S3 */ + EC_HOST_EVENT_LAZY_WAKE_MASK_S3, + + /* Lazy wake mask for S5 */ + EC_HOST_EVENT_LAZY_WAKE_MASK_S5, +}; + +#define EC_CMD_HOST_EVENT 0x00A4 + +/*****************************************************************************/ +/* Switch commands */ + +/* Enable/disable LCD backlight */ +#define EC_CMD_SWITCH_ENABLE_BKLIGHT 0x0090 + +struct ec_params_switch_enable_backlight { + uint8_t enabled; +} __ec_align1; + +/* Enable/disable WLAN/Bluetooth */ +#define EC_CMD_SWITCH_ENABLE_WIRELESS 0x0091 +#define EC_VER_SWITCH_ENABLE_WIRELESS 1 + +/* Version 0 params; no response */ +struct ec_params_switch_enable_wireless_v0 { + uint8_t enabled; +} __ec_align1; + +/* Version 1 params */ +struct ec_params_switch_enable_wireless_v1 { + /* Flags to enable now */ + uint8_t now_flags; + + /* Which flags to copy from now_flags */ + uint8_t now_mask; + + /* + * Flags to leave enabled in S3, if they're on at the S0->S3 + * transition. (Other flags will be disabled by the S0->S3 + * transition.) + */ + uint8_t suspend_flags; + + /* Which flags to copy from suspend_flags */ + uint8_t suspend_mask; +} __ec_align1; + +/* Version 1 response */ +struct ec_response_switch_enable_wireless_v1 { + /* Flags to enable now */ + uint8_t now_flags; + + /* Flags to leave enabled in S3 */ + uint8_t suspend_flags; +} __ec_align1; + +/*****************************************************************************/ +/* GPIO commands. Only available on EC if write protect has been disabled. */ + +/* Set GPIO output value */ +#define EC_CMD_GPIO_SET 0x0092 + +struct ec_params_gpio_set { + char name[32]; + uint8_t val; +} __ec_align1; + +/* Get GPIO value */ +#define EC_CMD_GPIO_GET 0x0093 + +/* Version 0 of input params and response */ +struct ec_params_gpio_get { + char name[32]; +} __ec_align1; + +struct ec_response_gpio_get { + uint8_t val; +} __ec_align1; + +/* Version 1 of input params and response */ +struct ec_params_gpio_get_v1 { + uint8_t subcmd; + union { + struct __ec_align1 { + char name[32]; + } get_value_by_name; + struct __ec_align1 { + uint8_t index; + } get_info; + }; +} __ec_align1; + +struct ec_response_gpio_get_v1 { + union { + struct __ec_align1 { + uint8_t val; + } get_value_by_name, get_count; + struct __ec_todo_unpacked { + uint8_t val; + char name[32]; + uint32_t flags; + } get_info; + }; +} __ec_todo_packed; + +enum gpio_get_subcmd { + EC_GPIO_GET_BY_NAME = 0, + EC_GPIO_GET_COUNT = 1, + EC_GPIO_GET_INFO = 2, +}; + +/*****************************************************************************/ +/* I2C commands. Only available when flash write protect is unlocked. */ + +/* + * CAUTION: These commands are deprecated, and are not supported anymore in EC + * builds >= 8398.0.0 (see crosbug.com/p/23570). + * + * Use EC_CMD_I2C_PASSTHRU instead. + */ + +/* Read I2C bus */ +#define EC_CMD_I2C_READ 0x0094 + +struct ec_params_i2c_read { + uint16_t addr; /* 8-bit address (7-bit shifted << 1) */ + uint8_t read_size; /* Either 8 or 16. */ + uint8_t port; + uint8_t offset; +} __ec_align_size1; + +struct ec_response_i2c_read { + uint16_t data; +} __ec_align2; + +/* Write I2C bus */ +#define EC_CMD_I2C_WRITE 0x0095 + +struct ec_params_i2c_write { + uint16_t data; + uint16_t addr; /* 8-bit address (7-bit shifted << 1) */ + uint8_t write_size; /* Either 8 or 16. */ + uint8_t port; + uint8_t offset; +} __ec_align_size1; + +/*****************************************************************************/ +/* Charge state commands. Only available when flash write protect unlocked. */ + +/* Force charge state machine to stop charging the battery or force it to + * discharge the battery. + */ +#define EC_CMD_CHARGE_CONTROL 0x0096 +#define EC_VER_CHARGE_CONTROL 3 + +enum ec_charge_control_mode { + CHARGE_CONTROL_NORMAL = 0, + CHARGE_CONTROL_IDLE, + CHARGE_CONTROL_DISCHARGE, + /* Add no more entry below. */ + CHARGE_CONTROL_COUNT, +}; + +#define EC_CHARGE_MODE_TEXT \ + { \ + [CHARGE_CONTROL_NORMAL] = "NORMAL", \ + [CHARGE_CONTROL_IDLE] = "IDLE", \ + [CHARGE_CONTROL_DISCHARGE] = "DISCHARGE", \ + } + +enum ec_charge_control_cmd { + EC_CHARGE_CONTROL_CMD_SET = 0, + EC_CHARGE_CONTROL_CMD_GET, +}; + +enum ec_charge_control_flag { + EC_CHARGE_CONTROL_FLAG_NO_IDLE = BIT(0), +}; + +struct ec_params_charge_control { + uint32_t mode; /* enum charge_control_mode */ + + /* Below are the fields added in V2. */ + uint8_t cmd; /* enum ec_charge_control_cmd. */ + uint8_t flags; /* enum ec_charge_control_flag (v3+) */ + /* + * Lower and upper thresholds for battery sustainer. This struct isn't + * named to avoid tainting foreign projects' name spaces. + * + * If charge mode is explicitly set (e.g. DISCHARGE), battery sustainer + * will be disabled. To disable battery sustainer, set mode=NORMAL, + * lower=-1, upper=-1. + */ + struct { + int8_t lower; /* Display SoC in percentage. */ + int8_t upper; /* Display SoC in percentage. */ + } sustain_soc; +} __ec_align4; + +/* Added in v2 */ +struct ec_response_charge_control { + uint32_t mode; /* enum charge_control_mode */ + struct { /* Battery sustainer thresholds */ + int8_t lower; + int8_t upper; + } sustain_soc; + uint8_t flags; /* enum ec_charge_control_flag (v3+) */ + uint8_t reserved; +} __ec_align4; + +/*****************************************************************************/ + +/* Snapshot console output buffer for use by EC_CMD_CONSOLE_READ. */ +#define EC_CMD_CONSOLE_SNAPSHOT 0x0097 + +/* + * Read data from the saved snapshot. If the subcmd parameter is + * CONSOLE_READ_NEXT, this will return data starting from the beginning of + * the latest snapshot. If it is CONSOLE_READ_RECENT, it will start from the + * end of the previous snapshot. + * + * The params are only looked at in version >= 1 of this command. Prior + * versions will just default to CONSOLE_READ_NEXT behavior. + * + * Response is null-terminated string. Empty string, if there is no more + * remaining output. + */ +#define EC_CMD_CONSOLE_READ 0x0098 + +enum ec_console_read_subcmd { + CONSOLE_READ_NEXT = 0, + CONSOLE_READ_RECENT +}; + +struct ec_params_console_read_v1 { + uint8_t subcmd; /* enum ec_console_read_subcmd */ +} __ec_align1; + +/*****************************************************************************/ + +/* + * Cut off battery power immediately or after the host has shut down. + * + * return EC_RES_INVALID_COMMAND if unsupported by a board/battery. + * EC_RES_SUCCESS if the command was successful. + * EC_RES_ERROR if the cut off command failed. + */ +#define EC_CMD_BATTERY_CUT_OFF 0x0099 + +#define EC_BATTERY_CUTOFF_FLAG_AT_SHUTDOWN BIT(0) + +struct ec_params_battery_cutoff { + uint8_t flags; +} __ec_align1; + +/*****************************************************************************/ +/* USB port mux control. */ + +/* + * Switch USB mux or return to automatic switching. + */ +#define EC_CMD_USB_MUX 0x009A + +struct ec_params_usb_mux { + uint8_t mux; +} __ec_align1; + +/*****************************************************************************/ +/* LDOs / FETs control. */ + +enum ec_ldo_state { + EC_LDO_STATE_OFF = 0, /* the LDO / FET is shut down */ + EC_LDO_STATE_ON = 1, /* the LDO / FET is ON / providing power */ +}; + +/* + * Switch on/off a LDO. + */ +#define EC_CMD_LDO_SET 0x009B + +struct ec_params_ldo_set { + uint8_t index; + uint8_t state; +} __ec_align1; + +/* + * Get LDO state. + */ +#define EC_CMD_LDO_GET 0x009C + +struct ec_params_ldo_get { + uint8_t index; +} __ec_align1; + +struct ec_response_ldo_get { + uint8_t state; +} __ec_align1; + +/*****************************************************************************/ +/* Power info. */ + +/* + * Get power info. + */ +#define EC_CMD_POWER_INFO 0x009D + +struct ec_response_power_info { + uint32_t usb_dev_type; + uint16_t voltage_ac; + uint16_t voltage_system; + uint16_t current_system; + uint16_t usb_current_limit; +} __ec_align4; + +/*****************************************************************************/ +/* I2C passthru command */ + +#define EC_CMD_I2C_PASSTHRU 0x009E + +/* Read data; if not present, message is a write */ +#define EC_I2C_FLAG_READ BIT(15) + +/* Mask for address */ +#define EC_I2C_ADDR_MASK 0x3ff + +#define EC_I2C_STATUS_NAK BIT(0) /* Transfer was not acknowledged */ +#define EC_I2C_STATUS_TIMEOUT BIT(1) /* Timeout during transfer */ + +/* Any error */ +#define EC_I2C_STATUS_ERROR (EC_I2C_STATUS_NAK | EC_I2C_STATUS_TIMEOUT) + +struct ec_params_i2c_passthru_msg { + uint16_t addr_flags; /* I2C slave address (7 or 10 bits) and flags */ + uint16_t len; /* Number of bytes to read or write */ +} __ec_align2; + +struct ec_params_i2c_passthru { + uint8_t port; /* I2C port number */ + uint8_t num_msgs; /* Number of messages */ + struct ec_params_i2c_passthru_msg msg[]; + /* Data to write for all messages is concatenated here */ +} __ec_align2; + +struct ec_response_i2c_passthru { + uint8_t i2c_status; /* Status flags (EC_I2C_STATUS_...) */ + uint8_t num_msgs; /* Number of messages processed */ + uint8_t data[]; /* Data read by messages concatenated here */ +} __ec_align1; + +/*****************************************************************************/ +/* AP hang detect */ +#define EC_CMD_HANG_DETECT 0x009F + +#define EC_HANG_DETECT_MIN_TIMEOUT 5 +#define EC_HANG_DETECT_MAX_TIMEOUT 65535 + +/* EC hang detect commands */ +enum ec_hang_detect_cmds { + /* Reload AP hang detect timer. */ + EC_HANG_DETECT_CMD_RELOAD = 0x0, + + /* Stop AP hang detect timer. */ + EC_HANG_DETECT_CMD_CANCEL = 0x1, + + /* Configure watchdog with given reboot timeout and + * cancel currently running AP hang detect timer. + */ + EC_HANG_DETECT_CMD_SET_TIMEOUT = 0x2, + + /* Get last hang status - whether the AP boot was clear or not */ + EC_HANG_DETECT_CMD_GET_STATUS = 0x3, + + /* Clear last hang status. Called when AP is rebooting/shutting down + * gracefully. + */ + EC_HANG_DETECT_CMD_CLEAR_STATUS = 0x4 +}; + +struct ec_params_hang_detect { + uint16_t command; /* enum ec_hang_detect_cmds */ + /* Timeout in seconds before generating reboot */ + uint16_t reboot_timeout_sec; +} __ec_align2; + +/* Status codes that describe whether AP has boot normally or the hang has been + * detected and EC has reset AP + */ +enum ec_hang_detect_status { + EC_HANG_DETECT_AP_BOOT_NORMAL = 0x0, + EC_HANG_DETECT_AP_BOOT_EC_WDT = 0x1, + EC_HANG_DETECT_AP_BOOT_COUNT, +}; + +struct ec_response_hang_detect { + uint8_t status; /* enum ec_hang_detect_status */ +} __ec_align1; +/*****************************************************************************/ +/* Commands for battery charging */ + +/* + * This is the single catch-all host command to exchange data regarding the + * charge state machine (v2 and up). + */ +#define EC_CMD_CHARGE_STATE 0x00A0 + +/* Subcommands for this host command */ +enum charge_state_command { + CHARGE_STATE_CMD_GET_STATE, + CHARGE_STATE_CMD_GET_PARAM, + CHARGE_STATE_CMD_SET_PARAM, + CHARGE_STATE_NUM_CMDS +}; + +/* + * Known param numbers are defined here. Ranges are reserved for board-specific + * params, which are handled by the particular implementations. + */ +enum charge_state_params { + CS_PARAM_CHG_VOLTAGE, /* charger voltage limit */ + CS_PARAM_CHG_CURRENT, /* charger current limit */ + CS_PARAM_CHG_INPUT_CURRENT, /* charger input current limit */ + CS_PARAM_CHG_STATUS, /* charger-specific status */ + CS_PARAM_CHG_OPTION, /* charger-specific options */ + CS_PARAM_LIMIT_POWER, /* + * Check if power is limited due to + * low battery and / or a weak external + * charger. READ ONLY. + */ + /* How many so far? */ + CS_NUM_BASE_PARAMS, + + /* Range for CONFIG_CHARGER_PROFILE_OVERRIDE params */ + CS_PARAM_CUSTOM_PROFILE_MIN = 0x10000, + CS_PARAM_CUSTOM_PROFILE_MAX = 0x1ffff, + + /* Range for CONFIG_CHARGE_STATE_DEBUG params */ + CS_PARAM_DEBUG_MIN = 0x20000, + CS_PARAM_DEBUG_CTL_MODE = 0x20000, + CS_PARAM_DEBUG_MANUAL_MODE, + CS_PARAM_DEBUG_SEEMS_DEAD, + CS_PARAM_DEBUG_SEEMS_DISCONNECTED, + CS_PARAM_DEBUG_BATT_REMOVED, + CS_PARAM_DEBUG_MANUAL_CURRENT, + CS_PARAM_DEBUG_MANUAL_VOLTAGE, + CS_PARAM_DEBUG_MAX = 0x2ffff, + + /* Other custom param ranges go here... */ +}; + +struct ec_params_charge_state { + uint8_t cmd; /* enum charge_state_command */ + union { + /* get_state has no args */ + + struct __ec_todo_unpacked { + uint32_t param; /* enum charge_state_param */ + } get_param; + + struct __ec_todo_unpacked { + uint32_t param; /* param to set */ + uint32_t value; /* value to set */ + } set_param; + }; +} __ec_todo_packed; + +struct ec_response_charge_state { + union { + struct __ec_align4 { + int ac; + int chg_voltage; + int chg_current; + int chg_input_current; + int batt_state_of_charge; + } get_state; + + struct __ec_align4 { + uint32_t value; + } get_param; + + /* set_param returns no args */ + }; +} __ec_align4; + + +/* + * Set maximum battery charging current. + */ +#define EC_CMD_CHARGE_CURRENT_LIMIT 0x00A1 + +struct ec_params_current_limit { + uint32_t limit; /* in mA */ +} __ec_align4; + +/* + * Set maximum external voltage / current. + */ +#define EC_CMD_EXTERNAL_POWER_LIMIT 0x00A2 + +/* Command v0 is used only on Spring and is obsolete + unsupported */ +struct ec_params_external_power_limit_v1 { + uint16_t current_lim; /* in mA, or EC_POWER_LIMIT_NONE to clear limit */ + uint16_t voltage_lim; /* in mV, or EC_POWER_LIMIT_NONE to clear limit */ +} __ec_align2; + +#define EC_POWER_LIMIT_NONE 0xffff + +/* + * Set maximum voltage & current of a dedicated charge port + */ +#define EC_CMD_OVERRIDE_DEDICATED_CHARGER_LIMIT 0x00A3 + +struct ec_params_dedicated_charger_limit { + uint16_t current_lim; /* in mA */ + uint16_t voltage_lim; /* in mV */ +} __ec_align2; + +/*****************************************************************************/ +/* Hibernate/Deep Sleep Commands */ + +/* Set the delay before going into hibernation. */ +#define EC_CMD_HIBERNATION_DELAY 0x00A8 + +struct ec_params_hibernation_delay { + /* + * Seconds to wait in G3 before hibernate. Pass in 0 to read the + * current settings without changing them. + */ + uint32_t seconds; +} __ec_align4; + +struct ec_response_hibernation_delay { + /* + * The current time in seconds in which the system has been in the G3 + * state. This value is reset if the EC transitions out of G3. + */ + uint32_t time_g3; + + /* + * The current time remaining in seconds until the EC should hibernate. + * This value is also reset if the EC transitions out of G3. + */ + uint32_t time_remaining; + + /* + * The current time in seconds that the EC should wait in G3 before + * hibernating. + */ + uint32_t hibernate_delay; +} __ec_align4; + +/* Inform the EC when entering a sleep state */ +#define EC_CMD_HOST_SLEEP_EVENT 0x00A9 + +enum host_sleep_event { + HOST_SLEEP_EVENT_S3_SUSPEND = 1, + HOST_SLEEP_EVENT_S3_RESUME = 2, + HOST_SLEEP_EVENT_S0IX_SUSPEND = 3, + HOST_SLEEP_EVENT_S0IX_RESUME = 4, + /* S3 suspend with additional enabled wake sources */ + HOST_SLEEP_EVENT_S3_WAKEABLE_SUSPEND = 5, +}; + +struct ec_params_host_sleep_event { + uint8_t sleep_event; +} __ec_align1; + +/* + * Use a default timeout value (CONFIG_SLEEP_TIMEOUT_MS) for detecting sleep + * transition failures + */ +#define EC_HOST_SLEEP_TIMEOUT_DEFAULT 0 + +/* Disable timeout detection for this sleep transition */ +#define EC_HOST_SLEEP_TIMEOUT_INFINITE 0xFFFF + +struct ec_params_host_sleep_event_v1 { + /* The type of sleep being entered or exited. */ + uint8_t sleep_event; + + /* Padding */ + uint8_t reserved; + union { + /* Parameters that apply for suspend messages. */ + struct { + /* + * The timeout in milliseconds between when this message + * is received and when the EC will declare sleep + * transition failure if the sleep signal is not + * asserted. + */ + uint16_t sleep_timeout_ms; + } suspend_params; + + /* No parameters for non-suspend messages. */ + }; +} __ec_align2; + +/* A timeout occurred when this bit is set */ +#define EC_HOST_RESUME_SLEEP_TIMEOUT 0x80000000 + +/* + * The mask defining which bits correspond to the number of sleep transitions, + * as well as the maximum number of suspend line transitions that will be + * reported back to the host. + */ +#define EC_HOST_RESUME_SLEEP_TRANSITIONS_MASK 0x7FFFFFFF + +struct ec_response_host_sleep_event_v1 { + union { + /* Response fields that apply for resume messages. */ + struct { + /* + * The number of sleep power signal transitions that + * occurred since the suspend message. The high bit + * indicates a timeout occurred. + */ + uint32_t sleep_transitions; + } resume_response; + + /* No response fields for non-resume messages. */ + }; +} __ec_align4; + +/*****************************************************************************/ +/* Device events */ +#define EC_CMD_DEVICE_EVENT 0x00AA + +enum ec_device_event { + EC_DEVICE_EVENT_TRACKPAD, + EC_DEVICE_EVENT_DSP, + EC_DEVICE_EVENT_WIFI, + EC_DEVICE_EVENT_WLC, +}; + +enum ec_device_event_param { + /* Get and clear pending device events */ + EC_DEVICE_EVENT_PARAM_GET_CURRENT_EVENTS, + /* Get device event mask */ + EC_DEVICE_EVENT_PARAM_GET_ENABLED_EVENTS, + /* Set device event mask */ + EC_DEVICE_EVENT_PARAM_SET_ENABLED_EVENTS, +}; + +#define EC_DEVICE_EVENT_MASK(event_code) BIT(event_code % 32) + +struct ec_params_device_event { + uint32_t event_mask; + uint8_t param; +} __ec_align_size1; + +struct ec_response_device_event { + uint32_t event_mask; +} __ec_align4; + +/*****************************************************************************/ +/* Smart battery pass-through */ + +/* Get / Set 16-bit smart battery registers */ +#define EC_CMD_SB_READ_WORD 0x00B0 +#define EC_CMD_SB_WRITE_WORD 0x00B1 + +/* Get / Set string smart battery parameters + * formatted as SMBUS "block". + */ +#define EC_CMD_SB_READ_BLOCK 0x00B2 +#define EC_CMD_SB_WRITE_BLOCK 0x00B3 + +struct ec_params_sb_rd { + uint8_t reg; +} __ec_align1; + +struct ec_response_sb_rd_word { + uint16_t value; +} __ec_align2; + +struct ec_params_sb_wr_word { + uint8_t reg; + uint16_t value; +} __ec_align1; + +struct ec_response_sb_rd_block { + uint8_t data[32]; +} __ec_align1; + +struct ec_params_sb_wr_block { + uint8_t reg; + uint16_t data[32]; +} __ec_align1; + +/*****************************************************************************/ +/* Battery vendor parameters + * + * Get or set vendor-specific parameters in the battery. Implementations may + * differ between boards or batteries. On a set operation, the response + * contains the actual value set, which may be rounded or clipped from the + * requested value. + */ + +#define EC_CMD_BATTERY_VENDOR_PARAM 0x00B4 + +enum ec_battery_vendor_param_mode { + BATTERY_VENDOR_PARAM_MODE_GET = 0, + BATTERY_VENDOR_PARAM_MODE_SET, +}; + +struct ec_params_battery_vendor_param { + uint32_t param; + uint32_t value; + uint8_t mode; +} __ec_align_size1; + +struct ec_response_battery_vendor_param { + uint32_t value; +} __ec_align4; + +/*****************************************************************************/ +/* + * Smart Battery Firmware Update Commands + */ +#define EC_CMD_SB_FW_UPDATE 0x00B5 + +enum ec_sb_fw_update_subcmd { + EC_SB_FW_UPDATE_PREPARE = 0x0, + EC_SB_FW_UPDATE_INFO = 0x1, /*query sb info */ + EC_SB_FW_UPDATE_BEGIN = 0x2, /*check if protected */ + EC_SB_FW_UPDATE_WRITE = 0x3, /*check if protected */ + EC_SB_FW_UPDATE_END = 0x4, + EC_SB_FW_UPDATE_STATUS = 0x5, + EC_SB_FW_UPDATE_PROTECT = 0x6, + EC_SB_FW_UPDATE_MAX = 0x7, +}; + +#define SB_FW_UPDATE_CMD_WRITE_BLOCK_SIZE 32 +#define SB_FW_UPDATE_CMD_STATUS_SIZE 2 +#define SB_FW_UPDATE_CMD_INFO_SIZE 8 + +struct ec_sb_fw_update_header { + uint16_t subcmd; /* enum ec_sb_fw_update_subcmd */ + uint16_t fw_id; /* firmware id */ +} __ec_align4; + +struct ec_params_sb_fw_update { + struct ec_sb_fw_update_header hdr; + union { + /* EC_SB_FW_UPDATE_PREPARE = 0x0 */ + /* EC_SB_FW_UPDATE_INFO = 0x1 */ + /* EC_SB_FW_UPDATE_BEGIN = 0x2 */ + /* EC_SB_FW_UPDATE_END = 0x4 */ + /* EC_SB_FW_UPDATE_STATUS = 0x5 */ + /* EC_SB_FW_UPDATE_PROTECT = 0x6 */ + /* Those have no args */ + + /* EC_SB_FW_UPDATE_WRITE = 0x3 */ + struct __ec_align4 { + uint8_t data[SB_FW_UPDATE_CMD_WRITE_BLOCK_SIZE]; + } write; + }; +} __ec_align4; + +struct ec_response_sb_fw_update { + union { + /* EC_SB_FW_UPDATE_INFO = 0x1 */ + struct __ec_align1 { + uint8_t data[SB_FW_UPDATE_CMD_INFO_SIZE]; + } info; + + /* EC_SB_FW_UPDATE_STATUS = 0x5 */ + struct __ec_align1 { + uint8_t data[SB_FW_UPDATE_CMD_STATUS_SIZE]; + } status; + }; +} __ec_align1; + +/* + * Entering Verified Boot Mode Command + * Default mode is VBOOT_MODE_NORMAL if EC did not receive this command. + * Valid Modes are: normal, developer, and recovery. + */ +#define EC_CMD_ENTERING_MODE 0x00B6 + +struct ec_params_entering_mode { + int vboot_mode; +} __ec_align4; + +#define VBOOT_MODE_NORMAL 0 +#define VBOOT_MODE_DEVELOPER 1 +#define VBOOT_MODE_RECOVERY 2 + +/*****************************************************************************/ +/* + * I2C passthru protection command: Protects I2C tunnels against access on + * certain addresses (board-specific). + */ +#define EC_CMD_I2C_PASSTHRU_PROTECT 0x00B7 + +enum ec_i2c_passthru_protect_subcmd { + EC_CMD_I2C_PASSTHRU_PROTECT_STATUS = 0x0, + EC_CMD_I2C_PASSTHRU_PROTECT_ENABLE = 0x1, +}; + +struct ec_params_i2c_passthru_protect { + uint8_t subcmd; + uint8_t port; /* I2C port number */ +} __ec_align1; + +struct ec_response_i2c_passthru_protect { + uint8_t status; /* Status flags (0: unlocked, 1: locked) */ +} __ec_align1; + + +/*****************************************************************************/ +/* + * HDMI CEC commands + * + * These commands are for sending and receiving message via HDMI CEC + */ + +#define EC_CEC_MAX_PORTS 16 + +#define MAX_CEC_MSG_LEN 16 + +/* + * Helper macros for packing/unpacking cec_events. + * bits[27:0] : bitmask of events from enum mkbp_cec_event + * bits[31:28]: port number + */ +#define EC_MKBP_EVENT_CEC_PACK(events, port) \ + (((events) & GENMASK(27, 0)) | (((port) & 0xf) << 28)) +#define EC_MKBP_EVENT_CEC_GET_EVENTS(event) ((event) & GENMASK(27, 0)) +#define EC_MKBP_EVENT_CEC_GET_PORT(event) (((event) >> 28) & 0xf) + +/* CEC message from the AP to be written on the CEC bus */ +#define EC_CMD_CEC_WRITE_MSG 0x00B8 + +/** + * struct ec_params_cec_write - Message to write to the CEC bus + * @msg: message content to write to the CEC bus + */ +struct ec_params_cec_write { + uint8_t msg[MAX_CEC_MSG_LEN]; +} __ec_align1; + +/** + * struct ec_params_cec_write_v1 - Message to write to the CEC bus + * @port: CEC port to write the message on + * @msg_len: length of msg in bytes + * @msg: message content to write to the CEC bus + */ +struct ec_params_cec_write_v1 { + uint8_t port; + uint8_t msg_len; + uint8_t msg[MAX_CEC_MSG_LEN]; +} __ec_align1; + +/* CEC message read from a CEC bus reported back to the AP */ +#define EC_CMD_CEC_READ_MSG 0x00B9 + +/** + * struct ec_params_cec_read - Read a message from the CEC bus + * @port: CEC port to read a message on + */ +struct ec_params_cec_read { + uint8_t port; +} __ec_align1; + +/** + * struct ec_response_cec_read - Message read from the CEC bus + * @msg_len: length of msg in bytes + * @msg: message content read from the CEC bus + */ +struct ec_response_cec_read { + uint8_t msg_len; + uint8_t msg[MAX_CEC_MSG_LEN]; +} __ec_align1; + +/* Set various CEC parameters */ +#define EC_CMD_CEC_SET 0x00BA + +/** + * struct ec_params_cec_set - CEC parameters set + * @cmd: parameter type, can be CEC_CMD_ENABLE or CEC_CMD_LOGICAL_ADDRESS + * @port: CEC port to set the parameter on + * @val: in case cmd is CEC_CMD_ENABLE, this field can be 0 to disable CEC + * or 1 to enable CEC functionality, in case cmd is + * CEC_CMD_LOGICAL_ADDRESS, this field encodes the requested logical + * address between 0 and 15 or 0xff to unregister + */ +struct ec_params_cec_set { + uint8_t cmd : 4; /* enum cec_command */ + uint8_t port : 4; + uint8_t val; +} __ec_align1; + +/* Read various CEC parameters */ +#define EC_CMD_CEC_GET 0x00BB + +/** + * struct ec_params_cec_get - CEC parameters get + * @cmd: parameter type, can be CEC_CMD_ENABLE or CEC_CMD_LOGICAL_ADDRESS + * @port: CEC port to get the parameter on + */ +struct ec_params_cec_get { + uint8_t cmd : 4; /* enum cec_command */ + uint8_t port : 4; +} __ec_align1; + +/** + * struct ec_response_cec_get - CEC parameters get response + * @val: in case cmd was CEC_CMD_ENABLE, this field will 0 if CEC is + * disabled or 1 if CEC functionality is enabled, + * in case cmd was CEC_CMD_LOGICAL_ADDRESS, this will encode the + * configured logical address between 0 and 15 or 0xff if unregistered + */ +struct ec_response_cec_get { + uint8_t val; +} __ec_align1; + +/* Get the number of CEC ports */ +#define EC_CMD_CEC_PORT_COUNT 0x00C1 + +/** + * struct ec_response_cec_port_count - CEC port count response + * @port_count: number of CEC ports + */ +struct ec_response_cec_port_count { + uint8_t port_count; +} __ec_align1; + +/* CEC parameters command */ +enum cec_command { + /* CEC reading, writing and events enable */ + CEC_CMD_ENABLE, + /* CEC logical address */ + CEC_CMD_LOGICAL_ADDRESS, +}; + +/* Events from CEC to AP */ +enum mkbp_cec_event { + /* Outgoing message was acknowledged by a follower */ + EC_MKBP_CEC_SEND_OK = BIT(0), + /* Outgoing message was not acknowledged */ + EC_MKBP_CEC_SEND_FAILED = BIT(1), + /* Incoming message can be read out by AP */ + EC_MKBP_CEC_HAVE_DATA = BIT(2), +}; + +/*****************************************************************************/ + +/* Commands for audio codec. */ +#define EC_CMD_EC_CODEC 0x00BC + +enum ec_codec_subcmd { + EC_CODEC_GET_CAPABILITIES = 0x0, + EC_CODEC_GET_SHM_ADDR = 0x1, + EC_CODEC_SET_SHM_ADDR = 0x2, + EC_CODEC_SUBCMD_COUNT, +}; + +enum ec_codec_cap { + EC_CODEC_CAP_WOV_AUDIO_SHM = 0, + EC_CODEC_CAP_WOV_LANG_SHM = 1, + EC_CODEC_CAP_LAST = 32, +}; + +enum ec_codec_shm_id { + EC_CODEC_SHM_ID_WOV_AUDIO = 0x0, + EC_CODEC_SHM_ID_WOV_LANG = 0x1, + EC_CODEC_SHM_ID_LAST, +}; + +enum ec_codec_shm_type { + EC_CODEC_SHM_TYPE_EC_RAM = 0x0, + EC_CODEC_SHM_TYPE_SYSTEM_RAM = 0x1, +}; + +struct __ec_align1 ec_param_ec_codec_get_shm_addr { + uint8_t shm_id; + uint8_t reserved[3]; +}; + +struct __ec_align4 ec_param_ec_codec_set_shm_addr { + uint64_t phys_addr; + uint32_t len; + uint8_t shm_id; + uint8_t reserved[3]; +}; + +struct __ec_align4 ec_param_ec_codec { + uint8_t cmd; /* enum ec_codec_subcmd */ + uint8_t reserved[3]; + + union { + struct ec_param_ec_codec_get_shm_addr + get_shm_addr_param; + struct ec_param_ec_codec_set_shm_addr + set_shm_addr_param; + }; +}; + +struct __ec_align4 ec_response_ec_codec_get_capabilities { + uint32_t capabilities; +}; + +struct __ec_align4 ec_response_ec_codec_get_shm_addr { + uint64_t phys_addr; + uint32_t len; + uint8_t type; + uint8_t reserved[3]; +}; + +/*****************************************************************************/ + +/* Commands for DMIC on audio codec. */ +#define EC_CMD_EC_CODEC_DMIC 0x00BD + +enum ec_codec_dmic_subcmd { + EC_CODEC_DMIC_GET_MAX_GAIN = 0x0, + EC_CODEC_DMIC_SET_GAIN_IDX = 0x1, + EC_CODEC_DMIC_GET_GAIN_IDX = 0x2, + EC_CODEC_DMIC_SUBCMD_COUNT, +}; + +enum ec_codec_dmic_channel { + EC_CODEC_DMIC_CHANNEL_0 = 0x0, + EC_CODEC_DMIC_CHANNEL_1 = 0x1, + EC_CODEC_DMIC_CHANNEL_2 = 0x2, + EC_CODEC_DMIC_CHANNEL_3 = 0x3, + EC_CODEC_DMIC_CHANNEL_4 = 0x4, + EC_CODEC_DMIC_CHANNEL_5 = 0x5, + EC_CODEC_DMIC_CHANNEL_6 = 0x6, + EC_CODEC_DMIC_CHANNEL_7 = 0x7, + EC_CODEC_DMIC_CHANNEL_COUNT, +}; + +struct __ec_align1 ec_param_ec_codec_dmic_set_gain_idx { + uint8_t channel; /* enum ec_codec_dmic_channel */ + uint8_t gain; + uint8_t reserved[2]; +}; + +struct __ec_align1 ec_param_ec_codec_dmic_get_gain_idx { + uint8_t channel; /* enum ec_codec_dmic_channel */ + uint8_t reserved[3]; +}; + +struct __ec_align4 ec_param_ec_codec_dmic { + uint8_t cmd; /* enum ec_codec_dmic_subcmd */ + uint8_t reserved[3]; + + union { + struct ec_param_ec_codec_dmic_set_gain_idx + set_gain_idx_param; + struct ec_param_ec_codec_dmic_get_gain_idx + get_gain_idx_param; + }; +}; + +struct __ec_align1 ec_response_ec_codec_dmic_get_max_gain { + uint8_t max_gain; +}; + +struct __ec_align1 ec_response_ec_codec_dmic_get_gain_idx { + uint8_t gain; +}; + +/*****************************************************************************/ + +/* Commands for I2S RX on audio codec. */ + +#define EC_CMD_EC_CODEC_I2S_RX 0x00BE + +enum ec_codec_i2s_rx_subcmd { + EC_CODEC_I2S_RX_ENABLE = 0x0, + EC_CODEC_I2S_RX_DISABLE = 0x1, + EC_CODEC_I2S_RX_SET_SAMPLE_DEPTH = 0x2, + EC_CODEC_I2S_RX_SET_DAIFMT = 0x3, + EC_CODEC_I2S_RX_SET_BCLK = 0x4, + EC_CODEC_I2S_RX_RESET = 0x5, + EC_CODEC_I2S_RX_SUBCMD_COUNT, +}; + +enum ec_codec_i2s_rx_sample_depth { + EC_CODEC_I2S_RX_SAMPLE_DEPTH_16 = 0x0, + EC_CODEC_I2S_RX_SAMPLE_DEPTH_24 = 0x1, + EC_CODEC_I2S_RX_SAMPLE_DEPTH_COUNT, +}; + +enum ec_codec_i2s_rx_daifmt { + EC_CODEC_I2S_RX_DAIFMT_I2S = 0x0, + EC_CODEC_I2S_RX_DAIFMT_RIGHT_J = 0x1, + EC_CODEC_I2S_RX_DAIFMT_LEFT_J = 0x2, + EC_CODEC_I2S_RX_DAIFMT_COUNT, +}; + +struct __ec_align1 ec_param_ec_codec_i2s_rx_set_sample_depth { + uint8_t depth; + uint8_t reserved[3]; +}; + +struct __ec_align1 ec_param_ec_codec_i2s_rx_set_gain { + uint8_t left; + uint8_t right; + uint8_t reserved[2]; +}; + +struct __ec_align1 ec_param_ec_codec_i2s_rx_set_daifmt { + uint8_t daifmt; + uint8_t reserved[3]; +}; + +struct __ec_align4 ec_param_ec_codec_i2s_rx_set_bclk { + uint32_t bclk; +}; + +struct __ec_align4 ec_param_ec_codec_i2s_rx { + uint8_t cmd; /* enum ec_codec_i2s_rx_subcmd */ + uint8_t reserved[3]; + + union { + struct ec_param_ec_codec_i2s_rx_set_sample_depth + set_sample_depth_param; + struct ec_param_ec_codec_i2s_rx_set_daifmt + set_daifmt_param; + struct ec_param_ec_codec_i2s_rx_set_bclk + set_bclk_param; + }; +}; + +/*****************************************************************************/ +/* Commands for WoV on audio codec. */ + +#define EC_CMD_EC_CODEC_WOV 0x00BF + +enum ec_codec_wov_subcmd { + EC_CODEC_WOV_SET_LANG = 0x0, + EC_CODEC_WOV_SET_LANG_SHM = 0x1, + EC_CODEC_WOV_GET_LANG = 0x2, + EC_CODEC_WOV_ENABLE = 0x3, + EC_CODEC_WOV_DISABLE = 0x4, + EC_CODEC_WOV_READ_AUDIO = 0x5, + EC_CODEC_WOV_READ_AUDIO_SHM = 0x6, + EC_CODEC_WOV_SUBCMD_COUNT, +}; + +/* + * @hash is SHA256 of the whole language model. + * @total_len indicates the length of whole language model. + * @offset is the cursor from the beginning of the model. + * @buf is the packet buffer. + * @len denotes how many bytes in the buf. + */ +struct __ec_align4 ec_param_ec_codec_wov_set_lang { + uint8_t hash[32]; + uint32_t total_len; + uint32_t offset; + uint8_t buf[128]; + uint32_t len; +}; + +struct __ec_align4 ec_param_ec_codec_wov_set_lang_shm { + uint8_t hash[32]; + uint32_t total_len; +}; + +struct __ec_align4 ec_param_ec_codec_wov { + uint8_t cmd; /* enum ec_codec_wov_subcmd */ + uint8_t reserved[3]; + + union { + struct ec_param_ec_codec_wov_set_lang + set_lang_param; + struct ec_param_ec_codec_wov_set_lang_shm + set_lang_shm_param; + }; +}; + +struct __ec_align4 ec_response_ec_codec_wov_get_lang { + uint8_t hash[32]; +}; + +struct __ec_align4 ec_response_ec_codec_wov_read_audio { + uint8_t buf[128]; + uint32_t len; +}; + +struct __ec_align4 ec_response_ec_codec_wov_read_audio_shm { + uint32_t offset; + uint32_t len; +}; + +/*****************************************************************************/ +/* System commands */ + +/* + * TODO(crosbug.com/p/23747): This is a confusing name, since it doesn't + * necessarily reboot the EC. Rename to "image" or something similar? + */ +#define EC_CMD_REBOOT_EC 0x00D2 + +/* Command */ +enum ec_reboot_cmd { + EC_REBOOT_CANCEL = 0, /* Cancel a pending reboot */ + EC_REBOOT_JUMP_RO = 1, /* Jump to RO without rebooting */ + EC_REBOOT_JUMP_RW = 2, /* Jump to active RW without rebooting */ + /* (command 3 was jump to RW-B) */ + EC_REBOOT_COLD = 4, /* Cold-reboot */ + EC_REBOOT_DISABLE_JUMP = 5, /* Disable jump until next reboot */ + EC_REBOOT_HIBERNATE = 6, /* Hibernate EC */ + EC_REBOOT_HIBERNATE_CLEAR_AP_OFF = 7, /* and clears AP_OFF flag */ + EC_REBOOT_COLD_AP_OFF = 8, /* Cold-reboot and don't boot AP */ +}; + +/* Flags for ec_params_reboot_ec.reboot_flags */ +#define EC_REBOOT_FLAG_RESERVED0 BIT(0) /* Was recovery request */ +#define EC_REBOOT_FLAG_ON_AP_SHUTDOWN BIT(1) /* Reboot after AP shutdown */ +#define EC_REBOOT_FLAG_SWITCH_RW_SLOT BIT(2) /* Switch RW slot */ + +struct ec_params_reboot_ec { + uint8_t cmd; /* enum ec_reboot_cmd */ + uint8_t flags; /* See EC_REBOOT_FLAG_* */ +} __ec_align1; + +/* + * Get information on last EC panic. + * + * Returns variable-length platform-dependent panic information. See panic.h + * for details. + */ +#define EC_CMD_GET_PANIC_INFO 0x00D3 + +/*****************************************************************************/ +/* + * Special commands + * + * These do not follow the normal rules for commands. See each command for + * details. + */ + +/* + * Reboot NOW + * + * This command will work even when the EC LPC interface is busy, because the + * reboot command is processed at interrupt level. Note that when the EC + * reboots, the host will reboot too, so there is no response to this command. + * + * Use EC_CMD_REBOOT_EC to reboot the EC more politely. + */ +#define EC_CMD_REBOOT 0x00D1 /* Think "die" */ + +/* + * Resend last response (not supported on LPC). + * + * Returns EC_RES_UNAVAILABLE if there is no response available - for example, + * there was no previous command, or the previous command's response was too + * big to save. + */ +#define EC_CMD_RESEND_RESPONSE 0x00DB + +/* + * This header byte on a command indicate version 0. Any header byte less + * than this means that we are talking to an old EC which doesn't support + * versioning. In that case, we assume version 0. + * + * Header bytes greater than this indicate a later version. For example, + * EC_CMD_VERSION0 + 1 means we are using version 1. + * + * The old EC interface must not use commands 0xdc or higher. + */ +#define EC_CMD_VERSION0 0x00DC + +/*****************************************************************************/ +/* + * PD commands + * + * These commands are for PD MCU communication. + */ + +/* EC to PD MCU exchange status command */ +#define EC_CMD_PD_EXCHANGE_STATUS 0x0100 +#define EC_VER_PD_EXCHANGE_STATUS 2 + +enum pd_charge_state { + PD_CHARGE_NO_CHANGE = 0, /* Don't change charge state */ + PD_CHARGE_NONE, /* No charging allowed */ + PD_CHARGE_5V, /* 5V charging only */ + PD_CHARGE_MAX /* Charge at max voltage */ +}; + +/* Status of EC being sent to PD */ +#define EC_STATUS_HIBERNATING BIT(0) + +struct ec_params_pd_status { + uint8_t status; /* EC status */ + int8_t batt_soc; /* battery state of charge */ + uint8_t charge_state; /* charging state (from enum pd_charge_state) */ +} __ec_align1; + +/* Status of PD being sent back to EC */ +#define PD_STATUS_HOST_EVENT BIT(0) /* Forward host event to AP */ +#define PD_STATUS_IN_RW BIT(1) /* Running RW image */ +#define PD_STATUS_JUMPED_TO_IMAGE BIT(2) /* Current image was jumped to */ +#define PD_STATUS_TCPC_ALERT_0 BIT(3) /* Alert active in port 0 TCPC */ +#define PD_STATUS_TCPC_ALERT_1 BIT(4) /* Alert active in port 1 TCPC */ +#define PD_STATUS_TCPC_ALERT_2 BIT(5) /* Alert active in port 2 TCPC */ +#define PD_STATUS_TCPC_ALERT_3 BIT(6) /* Alert active in port 3 TCPC */ +#define PD_STATUS_EC_INT_ACTIVE (PD_STATUS_TCPC_ALERT_0 | \ + PD_STATUS_TCPC_ALERT_1 | \ + PD_STATUS_HOST_EVENT) +struct ec_response_pd_status { + uint32_t curr_lim_ma; /* input current limit */ + uint16_t status; /* PD MCU status */ + int8_t active_charge_port; /* active charging port */ +} __ec_align_size1; + +/* AP to PD MCU host event status command, cleared on read */ +#define EC_CMD_PD_HOST_EVENT_STATUS 0x0104 + +/* PD MCU host event status bits */ +#define PD_EVENT_UPDATE_DEVICE BIT(0) +#define PD_EVENT_POWER_CHANGE BIT(1) +#define PD_EVENT_IDENTITY_RECEIVED BIT(2) +#define PD_EVENT_DATA_SWAP BIT(3) +#define PD_EVENT_TYPEC BIT(4) +#define PD_EVENT_PPM BIT(5) +#define PD_EVENT_INIT BIT(6) + +struct ec_response_host_event_status { + uint32_t status; /* PD MCU host event status */ +} __ec_align4; + +/* Set USB type-C port role and muxes */ +#define EC_CMD_USB_PD_CONTROL 0x0101 + +enum usb_pd_control_role { + USB_PD_CTRL_ROLE_NO_CHANGE = 0, + USB_PD_CTRL_ROLE_TOGGLE_ON = 1, /* == AUTO */ + USB_PD_CTRL_ROLE_TOGGLE_OFF = 2, + USB_PD_CTRL_ROLE_FORCE_SINK = 3, + USB_PD_CTRL_ROLE_FORCE_SOURCE = 4, + USB_PD_CTRL_ROLE_FREEZE = 5, + USB_PD_CTRL_ROLE_COUNT +}; + +enum usb_pd_control_mux { + USB_PD_CTRL_MUX_NO_CHANGE = 0, + USB_PD_CTRL_MUX_NONE = 1, + USB_PD_CTRL_MUX_USB = 2, + USB_PD_CTRL_MUX_DP = 3, + USB_PD_CTRL_MUX_DOCK = 4, + USB_PD_CTRL_MUX_AUTO = 5, + USB_PD_CTRL_MUX_COUNT +}; + +enum usb_pd_control_swap { + USB_PD_CTRL_SWAP_NONE = 0, + USB_PD_CTRL_SWAP_DATA = 1, + USB_PD_CTRL_SWAP_POWER = 2, + USB_PD_CTRL_SWAP_VCONN = 3, + USB_PD_CTRL_SWAP_COUNT +}; + +struct ec_params_usb_pd_control { + uint8_t port; + uint8_t role; + uint8_t mux; + uint8_t swap; +} __ec_align1; + +#define PD_CTRL_RESP_ENABLED_COMMS BIT(0) /* Communication enabled */ +#define PD_CTRL_RESP_ENABLED_CONNECTED BIT(1) /* Device connected */ +#define PD_CTRL_RESP_ENABLED_PD_CAPABLE BIT(2) /* Partner is PD capable */ + +#define PD_CTRL_RESP_ROLE_POWER BIT(0) /* 0=SNK/1=SRC */ +#define PD_CTRL_RESP_ROLE_DATA BIT(1) /* 0=UFP/1=DFP */ +#define PD_CTRL_RESP_ROLE_VCONN BIT(2) /* Vconn status */ +#define PD_CTRL_RESP_ROLE_DR_POWER BIT(3) /* Partner is dualrole power */ +#define PD_CTRL_RESP_ROLE_DR_DATA BIT(4) /* Partner is dualrole data */ +#define PD_CTRL_RESP_ROLE_USB_COMM BIT(5) /* Partner USB comm capable */ +#define PD_CTRL_RESP_ROLE_EXT_POWERED BIT(6) /* Partner externally powerd */ + +struct ec_response_usb_pd_control { + uint8_t enabled; + uint8_t role; + uint8_t polarity; + uint8_t state; +} __ec_align1; + +struct ec_response_usb_pd_control_v1 { + uint8_t enabled; + uint8_t role; + uint8_t polarity; + char state[32]; +} __ec_align1; + +/* Values representing usbc PD CC state */ +#define USBC_PD_CC_NONE 0 /* No accessory connected */ +#define USBC_PD_CC_NO_UFP 1 /* No UFP accessory connected */ +#define USBC_PD_CC_AUDIO_ACC 2 /* Audio accessory connected */ +#define USBC_PD_CC_DEBUG_ACC 3 /* Debug accessory connected */ +#define USBC_PD_CC_UFP_ATTACHED 4 /* UFP attached to usbc */ +#define USBC_PD_CC_DFP_ATTACHED 5 /* DPF attached to usbc */ + +/* Active/Passive Cable */ +#define USB_PD_CTRL_ACTIVE_CABLE BIT(0) +/* Optical/Non-optical cable */ +#define USB_PD_CTRL_OPTICAL_CABLE BIT(1) +/* 3rd Gen TBT device (or AMA)/2nd gen tbt Adapter */ +#define USB_PD_CTRL_TBT_LEGACY_ADAPTER BIT(2) +/* Active Link Uni-Direction */ +#define USB_PD_CTRL_ACTIVE_LINK_UNIDIR BIT(3) + +struct ec_response_usb_pd_control_v2 { + uint8_t enabled; + uint8_t role; + uint8_t polarity; + char state[32]; + uint8_t cc_state; /* enum pd_cc_states representing cc state */ + uint8_t dp_mode; /* Current DP pin mode (MODE_DP_PIN_[A-E]) */ + uint8_t reserved; /* Reserved for future use */ + uint8_t control_flags; /* USB_PD_CTRL_*flags */ + uint8_t cable_speed; /* TBT_SS_* cable speed */ + uint8_t cable_gen; /* TBT_GEN3_* cable rounded support */ +} __ec_align1; + +#define EC_CMD_USB_PD_PORTS 0x0102 + +/* Maximum number of PD ports on a device, num_ports will be <= this */ +#define EC_USB_PD_MAX_PORTS 8 + +struct ec_response_usb_pd_ports { + uint8_t num_ports; +} __ec_align1; + +#define EC_CMD_USB_PD_POWER_INFO 0x0103 + +#define PD_POWER_CHARGING_PORT 0xff +struct ec_params_usb_pd_power_info { + uint8_t port; +} __ec_align1; + +enum usb_chg_type { + USB_CHG_TYPE_NONE, + USB_CHG_TYPE_PD, + USB_CHG_TYPE_C, + USB_CHG_TYPE_PROPRIETARY, + USB_CHG_TYPE_BC12_DCP, + USB_CHG_TYPE_BC12_CDP, + USB_CHG_TYPE_BC12_SDP, + USB_CHG_TYPE_OTHER, + USB_CHG_TYPE_VBUS, + USB_CHG_TYPE_UNKNOWN, + USB_CHG_TYPE_DEDICATED, +}; +enum usb_power_roles { + USB_PD_PORT_POWER_DISCONNECTED, + USB_PD_PORT_POWER_SOURCE, + USB_PD_PORT_POWER_SINK, + USB_PD_PORT_POWER_SINK_NOT_CHARGING, +}; + +struct usb_chg_measures { + uint16_t voltage_max; + uint16_t voltage_now; + uint16_t current_max; + uint16_t current_lim; +} __ec_align2; + +struct ec_response_usb_pd_power_info { + uint8_t role; + uint8_t type; + uint8_t dualrole; + uint8_t reserved1; + struct usb_chg_measures meas; + uint32_t max_power; +} __ec_align4; + + +/* + * This command will return the number of USB PD charge port + the number + * of dedicated port present. + * EC_CMD_USB_PD_PORTS does NOT include the dedicated ports + */ +#define EC_CMD_CHARGE_PORT_COUNT 0x0105 +struct ec_response_charge_port_count { + uint8_t port_count; +} __ec_align1; + +/* Write USB-PD device FW */ +#define EC_CMD_USB_PD_FW_UPDATE 0x0110 + +enum usb_pd_fw_update_cmds { + USB_PD_FW_REBOOT, + USB_PD_FW_FLASH_ERASE, + USB_PD_FW_FLASH_WRITE, + USB_PD_FW_ERASE_SIG, +}; + +struct ec_params_usb_pd_fw_update { + uint16_t dev_id; + uint8_t cmd; + uint8_t port; + uint32_t size; /* Size to write in bytes */ + /* Followed by data to write */ +} __ec_align4; + +/* Write USB-PD Accessory RW_HASH table entry */ +#define EC_CMD_USB_PD_RW_HASH_ENTRY 0x0111 +/* RW hash is first 20 bytes of SHA-256 of RW section */ +#define PD_RW_HASH_SIZE 20 +struct ec_params_usb_pd_rw_hash_entry { + uint16_t dev_id; + uint8_t dev_rw_hash[PD_RW_HASH_SIZE]; + uint8_t reserved; /* + * For alignment of current_image + * TODO(rspangler) but it's not aligned! + * Should have been reserved[2]. + */ + uint32_t current_image; /* One of ec_current_image */ +} __ec_align1; + +/* Read USB-PD Accessory info */ +#define EC_CMD_USB_PD_DEV_INFO 0x0112 + +struct ec_params_usb_pd_info_request { + uint8_t port; +} __ec_align1; + +/* Read USB-PD Device discovery info */ +#define EC_CMD_USB_PD_DISCOVERY 0x0113 +struct ec_params_usb_pd_discovery_entry { + uint16_t vid; /* USB-IF VID */ + uint16_t pid; /* USB-IF PID */ + uint8_t ptype; /* product type (hub,periph,cable,ama) */ +} __ec_align_size1; + +/* Override default charge behavior */ +#define EC_CMD_PD_CHARGE_PORT_OVERRIDE 0x0114 + +/* Negative port parameters have special meaning */ +enum usb_pd_override_ports { + OVERRIDE_DONT_CHARGE = -2, + OVERRIDE_OFF = -1, + /* [0, CONFIG_USB_PD_PORT_COUNT): Port# */ +}; + +struct ec_params_charge_port_override { + int16_t override_port; /* Override port# */ +} __ec_align2; + +/* + * Read (and delete) one entry of PD event log. + * TODO(crbug.com/751742): Make this host command more generic to accommodate + * future non-PD logs that use the same internal EC event_log. + */ +#define EC_CMD_PD_GET_LOG_ENTRY 0x0115 + +struct ec_response_pd_log { + uint32_t timestamp; /* relative timestamp in milliseconds */ + uint8_t type; /* event type : see PD_EVENT_xx below */ + uint8_t size_port; /* [7:5] port number [4:0] payload size in bytes */ + uint16_t data; /* type-defined data payload */ + uint8_t payload[]; /* optional additional data payload: 0..16 bytes */ +} __ec_align4; + +/* The timestamp is the microsecond counter shifted to get about a ms. */ +#define PD_LOG_TIMESTAMP_SHIFT 10 /* 1 LSB = 1024us */ + +#define PD_LOG_SIZE_MASK 0x1f +#define PD_LOG_PORT_MASK 0xe0 +#define PD_LOG_PORT_SHIFT 5 +#define PD_LOG_PORT_SIZE(port, size) (((port) << PD_LOG_PORT_SHIFT) | \ + ((size) & PD_LOG_SIZE_MASK)) +#define PD_LOG_PORT(size_port) ((size_port) >> PD_LOG_PORT_SHIFT) +#define PD_LOG_SIZE(size_port) ((size_port) & PD_LOG_SIZE_MASK) + +/* PD event log : entry types */ +/* PD MCU events */ +#define PD_EVENT_MCU_BASE 0x00 +#define PD_EVENT_MCU_CHARGE (PD_EVENT_MCU_BASE+0) +#define PD_EVENT_MCU_CONNECT (PD_EVENT_MCU_BASE+1) +/* Reserved for custom board event */ +#define PD_EVENT_MCU_BOARD_CUSTOM (PD_EVENT_MCU_BASE+2) +/* PD generic accessory events */ +#define PD_EVENT_ACC_BASE 0x20 +#define PD_EVENT_ACC_RW_FAIL (PD_EVENT_ACC_BASE+0) +#define PD_EVENT_ACC_RW_ERASE (PD_EVENT_ACC_BASE+1) +/* PD power supply events */ +#define PD_EVENT_PS_BASE 0x40 +#define PD_EVENT_PS_FAULT (PD_EVENT_PS_BASE+0) +/* PD video dongles events */ +#define PD_EVENT_VIDEO_BASE 0x60 +#define PD_EVENT_VIDEO_DP_MODE (PD_EVENT_VIDEO_BASE+0) +#define PD_EVENT_VIDEO_CODEC (PD_EVENT_VIDEO_BASE+1) +/* Returned in the "type" field, when there is no entry available */ +#define PD_EVENT_NO_ENTRY 0xff + +/* + * PD_EVENT_MCU_CHARGE event definition : + * the payload is "struct usb_chg_measures" + * the data field contains the port state flags as defined below : + */ +/* Port partner is a dual role device */ +#define CHARGE_FLAGS_DUAL_ROLE BIT(15) +/* Port is the pending override port */ +#define CHARGE_FLAGS_DELAYED_OVERRIDE BIT(14) +/* Port is the override port */ +#define CHARGE_FLAGS_OVERRIDE BIT(13) +/* Charger type */ +#define CHARGE_FLAGS_TYPE_SHIFT 3 +#define CHARGE_FLAGS_TYPE_MASK (0xf << CHARGE_FLAGS_TYPE_SHIFT) +/* Power delivery role */ +#define CHARGE_FLAGS_ROLE_MASK (7 << 0) + +/* + * PD_EVENT_PS_FAULT data field flags definition : + */ +#define PS_FAULT_OCP 1 +#define PS_FAULT_FAST_OCP 2 +#define PS_FAULT_OVP 3 +#define PS_FAULT_DISCH 4 + +/* + * PD_EVENT_VIDEO_CODEC payload is "struct mcdp_info". + */ +struct mcdp_version { + uint8_t major; + uint8_t minor; + uint16_t build; +} __ec_align4; + +struct mcdp_info { + uint8_t family[2]; + uint8_t chipid[2]; + struct mcdp_version irom; + struct mcdp_version fw; +} __ec_align4; + +/* struct mcdp_info field decoding */ +#define MCDP_CHIPID(chipid) ((chipid[0] << 8) | chipid[1]) +#define MCDP_FAMILY(family) ((family[0] << 8) | family[1]) + +/* Get/Set USB-PD Alternate mode info */ +#define EC_CMD_USB_PD_GET_AMODE 0x0116 +struct ec_params_usb_pd_get_mode_request { + uint16_t svid_idx; /* SVID index to get */ + uint8_t port; /* port */ +} __ec_align_size1; + +struct ec_params_usb_pd_get_mode_response { + uint16_t svid; /* SVID */ + uint16_t opos; /* Object Position */ + uint32_t vdo[6]; /* Mode VDOs */ +} __ec_align4; + +#define EC_CMD_USB_PD_SET_AMODE 0x0117 + +enum pd_mode_cmd { + PD_EXIT_MODE = 0, + PD_ENTER_MODE = 1, + /* Not a command. Do NOT remove. */ + PD_MODE_CMD_COUNT, +}; + +struct ec_params_usb_pd_set_mode_request { + uint32_t cmd; /* enum pd_mode_cmd */ + uint16_t svid; /* SVID to set */ + uint8_t opos; /* Object Position */ + uint8_t port; /* port */ +} __ec_align4; + +/* Ask the PD MCU to record a log of a requested type */ +#define EC_CMD_PD_WRITE_LOG_ENTRY 0x0118 + +struct ec_params_pd_write_log_entry { + uint8_t type; /* event type : see PD_EVENT_xx above */ + uint8_t port; /* port#, or 0 for events unrelated to a given port */ +} __ec_align1; + + +/* Control USB-PD chip */ +#define EC_CMD_PD_CONTROL 0x0119 + +enum ec_pd_control_cmd { + PD_SUSPEND = 0, /* Suspend the PD chip (EC: stop talking to PD) */ + PD_RESUME, /* Resume the PD chip (EC: start talking to PD) */ + PD_RESET, /* Force reset the PD chip */ + PD_CONTROL_DISABLE, /* Disable further calls to this command */ + PD_CHIP_ON, /* Power on the PD chip */ +}; + +struct ec_params_pd_control { + uint8_t chip; /* chip id */ + uint8_t subcmd; +} __ec_align1; + +/* Get info about USB-C SS muxes */ +#define EC_CMD_USB_PD_MUX_INFO 0x011A + +struct ec_params_usb_pd_mux_info { + uint8_t port; /* USB-C port number */ +} __ec_align1; + +/* Flags representing mux state */ +#define USB_PD_MUX_NONE 0 /* Open switch */ +#define USB_PD_MUX_USB_ENABLED BIT(0) /* USB connected */ +#define USB_PD_MUX_DP_ENABLED BIT(1) /* DP connected */ +#define USB_PD_MUX_POLARITY_INVERTED BIT(2) /* CC line Polarity inverted */ +#define USB_PD_MUX_HPD_IRQ BIT(3) /* HPD IRQ is asserted */ +#define USB_PD_MUX_HPD_LVL BIT(4) /* HPD level is asserted */ +#define USB_PD_MUX_SAFE_MODE BIT(5) /* DP is in safe mode */ +#define USB_PD_MUX_TBT_COMPAT_ENABLED BIT(6) /* TBT compat enabled */ +#define USB_PD_MUX_USB4_ENABLED BIT(7) /* USB4 enabled */ + +struct ec_response_usb_pd_mux_info { + uint8_t flags; /* USB_PD_MUX_*-encoded USB mux state */ +} __ec_align1; + +#define EC_CMD_PD_CHIP_INFO 0x011B + +struct ec_params_pd_chip_info { + uint8_t port; /* USB-C port number */ + uint8_t renew; /* Force renewal */ +} __ec_align1; + +struct ec_response_pd_chip_info { + uint16_t vendor_id; + uint16_t product_id; + uint16_t device_id; + union { + uint8_t fw_version_string[8]; + uint64_t fw_version_number; + }; +} __ec_align2; + +struct ec_response_pd_chip_info_v1 { + uint16_t vendor_id; + uint16_t product_id; + uint16_t device_id; + union { + uint8_t fw_version_string[8]; + uint64_t fw_version_number; + }; + union { + uint8_t min_req_fw_version_string[8]; + uint64_t min_req_fw_version_number; + }; +} __ec_align2; + +/* Run RW signature verification and get status */ +#define EC_CMD_RWSIG_CHECK_STATUS 0x011C + +struct ec_response_rwsig_check_status { + uint32_t status; +} __ec_align4; + +/* For controlling RWSIG task */ +#define EC_CMD_RWSIG_ACTION 0x011D + +enum rwsig_action { + RWSIG_ACTION_ABORT = 0, /* Abort RWSIG and prevent jumping */ + RWSIG_ACTION_CONTINUE = 1, /* Jump to RW immediately */ +}; + +struct ec_params_rwsig_action { + uint32_t action; +} __ec_align4; + +/* Run verification on a slot */ +#define EC_CMD_EFS_VERIFY 0x011E + +struct ec_params_efs_verify { + uint8_t region; /* enum ec_flash_region */ +} __ec_align1; + +/* + * Retrieve info from Cros Board Info store. Response is based on the data + * type. Integers return a uint32. Strings return a string, using the response + * size to determine how big it is. + */ +#define EC_CMD_GET_CROS_BOARD_INFO 0x011F +/* + * Write info into Cros Board Info on EEPROM. Write fails if the board has + * hardware write-protect enabled. + */ +#define EC_CMD_SET_CROS_BOARD_INFO 0x0120 + +enum cbi_data_tag { + CBI_TAG_BOARD_VERSION = 0, /* uint32_t or smaller */ + CBI_TAG_OEM_ID = 1, /* uint32_t or smaller */ + CBI_TAG_SKU_ID = 2, /* uint32_t or smaller */ + CBI_TAG_DRAM_PART_NUM = 3, /* variable length ascii, nul terminated. */ + CBI_TAG_OEM_NAME = 4, /* variable length ascii, nul terminated. */ + CBI_TAG_MODEL_ID = 5, /* uint32_t or smaller */ + CBI_TAG_COUNT, +}; + +/* + * Flags to control read operation + * + * RELOAD: Invalidate cache and read data from EEPROM. Useful to verify + * write was successful without reboot. + */ +#define CBI_GET_RELOAD BIT(0) + +struct ec_params_get_cbi { + uint32_t tag; /* enum cbi_data_tag */ + uint32_t flag; /* CBI_GET_* */ +} __ec_align4; + +/* + * Flags to control write behavior. + * + * NO_SYNC: Makes EC update data in RAM but skip writing to EEPROM. It's + * useful when writing multiple fields in a row. + * INIT: Need to be set when creating a new CBI from scratch. All fields + * will be initialized to zero first. + */ +#define CBI_SET_NO_SYNC BIT(0) +#define CBI_SET_INIT BIT(1) + +struct ec_params_set_cbi { + uint32_t tag; /* enum cbi_data_tag */ + uint32_t flag; /* CBI_SET_* */ + uint32_t size; /* Data size */ + uint8_t data[]; /* For string and raw data */ +} __ec_align1; + +/* + * Information about resets of the AP by the EC and the EC's own uptime. + */ +#define EC_CMD_GET_UPTIME_INFO 0x0121 + +struct ec_response_uptime_info { + /* + * Number of milliseconds since the last EC boot. Sysjump resets + * typically do not restart the EC's time_since_boot epoch. + * + * WARNING: The EC's sense of time is much less accurate than the AP's + * sense of time, in both phase and frequency. This timebase is similar + * to CLOCK_MONOTONIC_RAW, but with 1% or more frequency error. + */ + uint32_t time_since_ec_boot_ms; + + /* + * Number of times the AP was reset by the EC since the last EC boot. + * Note that the AP may be held in reset by the EC during the initial + * boot sequence, such that the very first AP boot may count as more + * than one here. + */ + uint32_t ap_resets_since_ec_boot; + + /* + * The set of flags which describe the EC's most recent reset. See + * include/system.h RESET_FLAG_* for details. + */ + uint32_t ec_reset_flags; + + /* Empty log entries have both the cause and timestamp set to zero. */ + struct ap_reset_log_entry { + /* + * See include/chipset.h: enum chipset_{reset,shutdown}_reason + * for details. + */ + uint16_t reset_cause; + + /* Reserved for protocol growth. */ + uint16_t reserved; + + /* + * The time of the reset's assertion, in milliseconds since the + * last EC boot, in the same epoch as time_since_ec_boot_ms. + * Set to zero if the log entry is empty. + */ + uint32_t reset_time_ms; + } recent_ap_reset[4]; +} __ec_align4; + +/* + * Add entropy to the device secret (stored in the rollback region). + * + * Depending on the chip, the operation may take a long time (e.g. to erase + * flash), so the commands are asynchronous. + */ +#define EC_CMD_ADD_ENTROPY 0x0122 + +enum add_entropy_action { + /* Add entropy to the current secret. */ + ADD_ENTROPY_ASYNC = 0, + /* + * Add entropy, and also make sure that the previous secret is erased. + * (this can be implemented by adding entropy multiple times until + * all rolback blocks have been overwritten). + */ + ADD_ENTROPY_RESET_ASYNC = 1, + /* Read back result from the previous operation. */ + ADD_ENTROPY_GET_RESULT = 2, +}; + +struct ec_params_rollback_add_entropy { + uint8_t action; +} __ec_align1; + +/* + * Perform a single read of a given ADC channel. + */ +#define EC_CMD_ADC_READ 0x0123 + +struct ec_params_adc_read { + uint8_t adc_channel; +} __ec_align1; + +struct ec_response_adc_read { + int32_t adc_value; +} __ec_align4; + +/* + * Read back rollback info + */ +#define EC_CMD_ROLLBACK_INFO 0x0124 + +struct ec_response_rollback_info { + int32_t id; /* Incrementing number to indicate which region to use. */ + int32_t rollback_min_version; + int32_t rw_rollback_version; +} __ec_align4; + + +/* Issue AP reset */ +#define EC_CMD_AP_RESET 0x0125 + +/* + * Get the number of peripheral charge ports + */ +#define EC_CMD_PCHG_COUNT 0x0134 + +#define EC_PCHG_MAX_PORTS 8 + +struct ec_response_pchg_count { + uint8_t port_count; +} __ec_align1; + +/* + * Get the status of a peripheral charge port + */ +#define EC_CMD_PCHG 0x0135 + +struct ec_params_pchg { + uint8_t port; +} __ec_align1; + +struct ec_response_pchg { + uint32_t error; /* enum pchg_error */ + uint8_t state; /* enum pchg_state state */ + uint8_t battery_percentage; + uint8_t unused0; + uint8_t unused1; + /* Fields added in version 1 */ + uint32_t fw_version; + uint32_t dropped_event_count; +} __ec_align2; + +enum pchg_state { + /* Charger is reset and not initialized. */ + PCHG_STATE_RESET = 0, + /* Charger is initialized or disabled. */ + PCHG_STATE_INITIALIZED, + /* Charger is enabled and ready to detect a device. */ + PCHG_STATE_ENABLED, + /* Device is in proximity. */ + PCHG_STATE_DETECTED, + /* Device is being charged. */ + PCHG_STATE_CHARGING, + /* Device is fully charged. It implies DETECTED (& not charging). */ + PCHG_STATE_FULL, + /* In download (a.k.a. firmware update) mode */ + PCHG_STATE_DOWNLOAD, + /* In download mode. Ready for receiving data. */ + PCHG_STATE_DOWNLOADING, + /* Device is ready for data communication. */ + PCHG_STATE_CONNECTED, + /* Put no more entry below */ + PCHG_STATE_COUNT, +}; + +#define EC_PCHG_STATE_TEXT { \ + [PCHG_STATE_RESET] = "RESET", \ + [PCHG_STATE_INITIALIZED] = "INITIALIZED", \ + [PCHG_STATE_ENABLED] = "ENABLED", \ + [PCHG_STATE_DETECTED] = "DETECTED", \ + [PCHG_STATE_CHARGING] = "CHARGING", \ + [PCHG_STATE_FULL] = "FULL", \ + [PCHG_STATE_DOWNLOAD] = "DOWNLOAD", \ + [PCHG_STATE_DOWNLOADING] = "DOWNLOADING", \ + [PCHG_STATE_CONNECTED] = "CONNECTED", \ + } + +/* + * Update firmware of peripheral chip + */ +#define EC_CMD_PCHG_UPDATE 0x0136 + +/* Port number is encoded in bit[28:31]. */ +#define EC_MKBP_PCHG_PORT_SHIFT 28 +/* Utility macro for converting MKBP event to port number. */ +#define EC_MKBP_PCHG_EVENT_TO_PORT(e) (((e) >> EC_MKBP_PCHG_PORT_SHIFT) & 0xf) +/* Utility macro for extracting event bits. */ +#define EC_MKBP_PCHG_EVENT_MASK(e) ((e) \ + & GENMASK(EC_MKBP_PCHG_PORT_SHIFT-1, 0)) + +#define EC_MKBP_PCHG_UPDATE_OPENED BIT(0) +#define EC_MKBP_PCHG_WRITE_COMPLETE BIT(1) +#define EC_MKBP_PCHG_UPDATE_CLOSED BIT(2) +#define EC_MKBP_PCHG_UPDATE_ERROR BIT(3) +#define EC_MKBP_PCHG_DEVICE_EVENT BIT(4) + +enum ec_pchg_update_cmd { + /* Reset chip to normal mode. */ + EC_PCHG_UPDATE_CMD_RESET_TO_NORMAL = 0, + /* Reset and put a chip in update (a.k.a. download) mode. */ + EC_PCHG_UPDATE_CMD_OPEN, + /* Write a block of data containing FW image. */ + EC_PCHG_UPDATE_CMD_WRITE, + /* Close update session. */ + EC_PCHG_UPDATE_CMD_CLOSE, + /* End of commands */ + EC_PCHG_UPDATE_CMD_COUNT, +}; + +struct ec_params_pchg_update { + /* PCHG port number */ + uint8_t port; + /* enum ec_pchg_update_cmd */ + uint8_t cmd; + /* Padding */ + uint8_t reserved0; + uint8_t reserved1; + /* Version of new firmware */ + uint32_t version; + /* CRC32 of new firmware */ + uint32_t crc32; + /* Address in chip memory where <data> is written to */ + uint32_t addr; + /* Size of <data> */ + uint32_t size; + /* Partial data of new firmware */ + uint8_t data[]; +} __ec_align4; + +BUILD_ASSERT(EC_PCHG_UPDATE_CMD_COUNT + < BIT(sizeof(((struct ec_params_pchg_update *)0)->cmd)*8)); + +struct ec_response_pchg_update { + /* Block size */ + uint32_t block_size; +} __ec_align4; + + +/*****************************************************************************/ +/* Voltage regulator controls */ + +/* + * Get basic info of voltage regulator for given index. + * + * Returns the regulator name and supported voltage list in mV. + */ +#define EC_CMD_REGULATOR_GET_INFO 0x012C + +/* Maximum length of regulator name */ +#define EC_REGULATOR_NAME_MAX_LEN 16 + +/* Maximum length of the supported voltage list. */ +#define EC_REGULATOR_VOLTAGE_MAX_COUNT 16 + +struct ec_params_regulator_get_info { + uint32_t index; +} __ec_align4; + +struct ec_response_regulator_get_info { + char name[EC_REGULATOR_NAME_MAX_LEN]; + uint16_t num_voltages; + uint16_t voltages_mv[EC_REGULATOR_VOLTAGE_MAX_COUNT]; +} __ec_align2; + +/* + * Configure the regulator as enabled / disabled. + */ +#define EC_CMD_REGULATOR_ENABLE 0x012D + +struct ec_params_regulator_enable { + uint32_t index; + uint8_t enable; +} __ec_align4; + +/* + * Query if the regulator is enabled. + * + * Returns 1 if the regulator is enabled, 0 if not. + */ +#define EC_CMD_REGULATOR_IS_ENABLED 0x012E + +struct ec_params_regulator_is_enabled { + uint32_t index; +} __ec_align4; + +struct ec_response_regulator_is_enabled { + uint8_t enabled; +} __ec_align1; + +/* + * Set voltage for the voltage regulator within the range specified. + * + * The driver should select the voltage in range closest to min_mv. + * + * Also note that this might be called before the regulator is enabled, and the + * setting should be in effect after the regulator is enabled. + */ +#define EC_CMD_REGULATOR_SET_VOLTAGE 0x012F + +struct ec_params_regulator_set_voltage { + uint32_t index; + uint32_t min_mv; + uint32_t max_mv; +} __ec_align4; + +/* + * Get the currently configured voltage for the voltage regulator. + * + * Note that this might be called before the regulator is enabled, and this + * should return the configured output voltage if the regulator is enabled. + */ +#define EC_CMD_REGULATOR_GET_VOLTAGE 0x0130 + +struct ec_params_regulator_get_voltage { + uint32_t index; +} __ec_align4; + +struct ec_response_regulator_get_voltage { + uint32_t voltage_mv; +} __ec_align4; + +/* + * Gather all discovery information for the given port and partner type. + * + * Note that if discovery has not yet completed, only the currently completed + * responses will be filled in. If the discovery data structures are changed + * in the process of the command running, BUSY will be returned. + * + * VDO field sizes are set to the maximum possible number of VDOs a VDM may + * contain, while the number of SVIDs here is selected to fit within the PROTO2 + * maximum parameter size. + */ +#define EC_CMD_TYPEC_DISCOVERY 0x0131 + +enum typec_partner_type { + TYPEC_PARTNER_SOP = 0, + TYPEC_PARTNER_SOP_PRIME = 1, +}; + +struct ec_params_typec_discovery { + uint8_t port; + uint8_t partner_type; /* enum typec_partner_type */ +} __ec_align1; + +struct svid_mode_info { + uint16_t svid; + uint16_t mode_count; /* Number of modes partner sent */ + uint32_t mode_vdo[6]; /* Max VDOs allowed after VDM header is 6 */ +}; + +struct ec_response_typec_discovery { + uint8_t identity_count; /* Number of identity VDOs partner sent */ + uint8_t svid_count; /* Number of SVIDs partner sent */ + uint16_t reserved; + uint32_t discovery_vdo[6]; /* Max VDOs allowed after VDM header is 6 */ + struct svid_mode_info svids[]; +} __ec_align1; + +/* USB Type-C commands for AP-controlled device policy. */ +#define EC_CMD_TYPEC_CONTROL 0x0132 + +enum typec_control_command { + TYPEC_CONTROL_COMMAND_EXIT_MODES, + TYPEC_CONTROL_COMMAND_CLEAR_EVENTS, + TYPEC_CONTROL_COMMAND_ENTER_MODE, + TYPEC_CONTROL_COMMAND_TBT_UFP_REPLY, + TYPEC_CONTROL_COMMAND_USB_MUX_SET, + TYPEC_CONTROL_COMMAND_BIST_SHARE_MODE, + TYPEC_CONTROL_COMMAND_SEND_VDM_REQ, +}; + +/* Replies the AP may specify to the TBT EnterMode command as a UFP */ +enum typec_tbt_ufp_reply { + TYPEC_TBT_UFP_REPLY_NAK, + TYPEC_TBT_UFP_REPLY_ACK, +}; + +struct typec_usb_mux_set { + uint8_t mux_index; /* Index of the mux to set in the chain */ + uint8_t mux_flags; /* USB_PD_MUX_*-encoded USB mux state to set */ +} __ec_align1; + +#define VDO_MAX_SIZE 7 + +struct typec_vdm_req { + /* VDM data, including VDM header */ + uint32_t vdm_data[VDO_MAX_SIZE]; + /* Number of 32-bit fields filled in */ + uint8_t vdm_data_objects; + /* Partner to address - see enum typec_partner_type */ + uint8_t partner_type; +} __ec_align1; + +struct ec_params_typec_control { + uint8_t port; + uint8_t command; /* enum typec_control_command */ + uint16_t reserved; + + /* + * This section will be interpreted based on |command|. Define a + * placeholder structure to avoid having to increase the size and bump + * the command version when adding new sub-commands. + */ + union { + uint32_t clear_events_mask; + uint8_t mode_to_enter; /* enum typec_mode */ + uint8_t tbt_ufp_reply; /* enum typec_tbt_ufp_reply */ + struct typec_usb_mux_set mux_params; + /* Used for VMD_REQ */ + struct typec_vdm_req vdm_req_params; + uint8_t placeholder[128]; + }; +} __ec_align1; + +/* + * Gather all status information for a port. + * + * Note: this covers many of the return fields from the deprecated + * EC_CMD_USB_PD_CONTROL command, except those that are redundant with the + * discovery data. The "enum pd_cc_states" is defined with the deprecated + * EC_CMD_USB_PD_CONTROL command. + * + * This also combines in the EC_CMD_USB_PD_MUX_INFO flags. + */ +#define EC_CMD_TYPEC_STATUS 0x0133 + +/* + * Power role. + * + * Note this is also used for PD header creation, and values align to those in + * the Power Delivery Specification Revision 3.0 (See + * 6.2.1.1.4 Port Power Role). + */ +enum pd_power_role { + PD_ROLE_SINK = 0, + PD_ROLE_SOURCE = 1 +}; + +/* + * Data role. + * + * Note this is also used for PD header creation, and the first two values + * align to those in the Power Delivery Specification Revision 3.0 (See + * 6.2.1.1.6 Port Data Role). + */ +enum pd_data_role { + PD_ROLE_UFP = 0, + PD_ROLE_DFP = 1, + PD_ROLE_DISCONNECTED = 2, +}; + +enum pd_vconn_role { + PD_ROLE_VCONN_OFF = 0, + PD_ROLE_VCONN_SRC = 1, +}; + +/* + * Note: BIT(0) may be used to determine whether the polarity is CC1 or CC2, + * regardless of whether a debug accessory is connected. + */ +enum tcpc_cc_polarity { + /* + * _CCx: is used to indicate the polarity while not connected to + * a Debug Accessory. Only one CC line will assert a resistor and + * the other will be open. + */ + POLARITY_CC1 = 0, + POLARITY_CC2 = 1, + + /* + * _CCx_DTS is used to indicate the polarity while connected to a + * SRC Debug Accessory. Assert resistors on both lines. + */ + POLARITY_CC1_DTS = 2, + POLARITY_CC2_DTS = 3, + + /* + * The current TCPC code relies on these specific POLARITY values. + * Adding in a check to verify if the list grows for any reason + * that this will give a hint that other places need to be + * adjusted. + */ + POLARITY_COUNT +}; + +#define PD_STATUS_EVENT_SOP_DISC_DONE BIT(0) +#define PD_STATUS_EVENT_SOP_PRIME_DISC_DONE BIT(1) +#define PD_STATUS_EVENT_HARD_RESET BIT(2) +#define PD_STATUS_EVENT_DISCONNECTED BIT(3) +#define PD_STATUS_EVENT_MUX_0_SET_DONE BIT(4) +#define PD_STATUS_EVENT_MUX_1_SET_DONE BIT(5) +#define PD_STATUS_EVENT_VDM_REQ_REPLY BIT(6) +#define PD_STATUS_EVENT_VDM_REQ_FAILED BIT(7) +#define PD_STATUS_EVENT_VDM_ATTENTION BIT(8) + +struct ec_params_typec_status { + uint8_t port; +} __ec_align1; + +struct ec_response_typec_status { + uint8_t pd_enabled; /* PD communication enabled - bool */ + uint8_t dev_connected; /* Device connected - bool */ + uint8_t sop_connected; /* Device is SOP PD capable - bool */ + uint8_t source_cap_count; /* Number of Source Cap PDOs */ + + uint8_t power_role; /* enum pd_power_role */ + uint8_t data_role; /* enum pd_data_role */ + uint8_t vconn_role; /* enum pd_vconn_role */ + uint8_t sink_cap_count; /* Number of Sink Cap PDOs */ + + uint8_t polarity; /* enum tcpc_cc_polarity */ + uint8_t cc_state; /* enum pd_cc_states */ + uint8_t dp_pin; /* DP pin mode (MODE_DP_IN_[A-E]) */ + uint8_t mux_state; /* USB_PD_MUX* - encoded mux state */ + + char tc_state[32]; /* TC state name */ + + uint32_t events; /* PD_STATUS_EVENT bitmask */ + + /* + * BCD PD revisions for partners + * + * The format has the PD major reversion in the upper nibble, and PD + * minor version in the next nibble. Following two nibbles are + * currently 0. + * ex. PD 3.2 would map to 0x3200 + * + * PD major/minor will be 0 if no PD device is connected. + */ + uint16_t sop_revision; + uint16_t sop_prime_revision; + + uint32_t source_cap_pdos[7]; /* Max 7 PDOs can be present */ + + uint32_t sink_cap_pdos[7]; /* Max 7 PDOs can be present */ +} __ec_align1; + +/* + * Gather the response to the most recent VDM REQ from the AP, as well + * as popping the oldest VDM:Attention from the DPM queue + */ +#define EC_CMD_TYPEC_VDM_RESPONSE 0x013C + +struct ec_params_typec_vdm_response { + uint8_t port; +} __ec_align1; + +struct ec_response_typec_vdm_response { + /* Number of 32-bit fields filled in */ + uint8_t vdm_data_objects; + /* Partner to address - see enum typec_partner_type */ + uint8_t partner_type; + /* enum ec_status describing VDM response */ + uint16_t vdm_response_err; + /* VDM data, including VDM header */ + uint32_t vdm_response[VDO_MAX_SIZE]; + /* Number of 32-bit Attention fields filled in */ + uint8_t vdm_attention_objects; + /* Number of remaining messages to consume */ + uint8_t vdm_attention_left; + /* Reserved */ + uint16_t reserved1; + /* VDM:Attention contents */ + uint32_t vdm_attention[2]; +} __ec_align1; + +#undef VDO_MAX_SIZE + +/* + * UCSI OPM-PPM commands + * + * These commands are used for communication between OPM and PPM. + * Only UCSI3.0 is tested. + */ + +#define EC_CMD_UCSI_PPM_SET 0x0140 + +/* The data size is stored in the host command protocol header. */ +struct ec_params_ucsi_ppm_set { + uint16_t offset; + uint8_t data[]; +} __ec_align2; + +#define EC_CMD_UCSI_PPM_GET 0x0141 + +/* For 'GET' sub-commands, data will be returned as a raw payload. */ +struct ec_params_ucsi_ppm_get { + uint16_t offset; + uint8_t size; +} __ec_align2; + +/*****************************************************************************/ +/* The command range 0x200-0x2FF is reserved for Rotor. */ + +/*****************************************************************************/ +/* + * Reserve a range of host commands for the CR51 firmware. + */ +#define EC_CMD_CR51_BASE 0x0300 +#define EC_CMD_CR51_LAST 0x03FF + +/*****************************************************************************/ +/* Fingerprint MCU commands: range 0x0400-0x040x */ + +/* Fingerprint SPI sensor passthru command: prototyping ONLY */ +#define EC_CMD_FP_PASSTHRU 0x0400 + +#define EC_FP_FLAG_NOT_COMPLETE 0x1 + +struct ec_params_fp_passthru { + uint16_t len; /* Number of bytes to write then read */ + uint16_t flags; /* EC_FP_FLAG_xxx */ + uint8_t data[]; /* Data to send */ +} __ec_align2; + +/* Configure the Fingerprint MCU behavior */ +#define EC_CMD_FP_MODE 0x0402 + +/* Put the sensor in its lowest power mode */ +#define FP_MODE_DEEPSLEEP BIT(0) +/* Wait to see a finger on the sensor */ +#define FP_MODE_FINGER_DOWN BIT(1) +/* Poll until the finger has left the sensor */ +#define FP_MODE_FINGER_UP BIT(2) +/* Capture the current finger image */ +#define FP_MODE_CAPTURE BIT(3) +/* Finger enrollment session on-going */ +#define FP_MODE_ENROLL_SESSION BIT(4) +/* Enroll the current finger image */ +#define FP_MODE_ENROLL_IMAGE BIT(5) +/* Try to match the current finger image */ +#define FP_MODE_MATCH BIT(6) +/* Reset and re-initialize the sensor. */ +#define FP_MODE_RESET_SENSOR BIT(7) +/* special value: don't change anything just read back current mode */ +#define FP_MODE_DONT_CHANGE BIT(31) + +#define FP_VALID_MODES (FP_MODE_DEEPSLEEP | \ + FP_MODE_FINGER_DOWN | \ + FP_MODE_FINGER_UP | \ + FP_MODE_CAPTURE | \ + FP_MODE_ENROLL_SESSION | \ + FP_MODE_ENROLL_IMAGE | \ + FP_MODE_MATCH | \ + FP_MODE_RESET_SENSOR | \ + FP_MODE_DONT_CHANGE) + +/* Capture types defined in bits [30..28] */ +#define FP_MODE_CAPTURE_TYPE_SHIFT 28 +#define FP_MODE_CAPTURE_TYPE_MASK (0x7 << FP_MODE_CAPTURE_TYPE_SHIFT) +/* + * This enum must remain ordered, if you add new values you must ensure that + * FP_CAPTURE_TYPE_MAX is still the last one. + */ +enum fp_capture_type { + /* Full blown vendor-defined capture (produces 'frame_size' bytes) */ + FP_CAPTURE_VENDOR_FORMAT = 0, + /* Simple raw image capture (produces width x height x bpp bits) */ + FP_CAPTURE_SIMPLE_IMAGE = 1, + /* Self test pattern (e.g. checkerboard) */ + FP_CAPTURE_PATTERN0 = 2, + /* Self test pattern (e.g. inverted checkerboard) */ + FP_CAPTURE_PATTERN1 = 3, + /* Capture for Quality test with fixed contrast */ + FP_CAPTURE_QUALITY_TEST = 4, + /* Capture for pixel reset value test */ + FP_CAPTURE_RESET_TEST = 5, + FP_CAPTURE_TYPE_MAX, +}; +/* Extracts the capture type from the sensor 'mode' word */ +#define FP_CAPTURE_TYPE(mode) (((mode) & FP_MODE_CAPTURE_TYPE_MASK) \ + >> FP_MODE_CAPTURE_TYPE_SHIFT) + +struct ec_params_fp_mode { + uint32_t mode; /* as defined by FP_MODE_ constants */ +} __ec_align4; + +struct ec_response_fp_mode { + uint32_t mode; /* as defined by FP_MODE_ constants */ +} __ec_align4; + +/* Retrieve Fingerprint sensor information */ +#define EC_CMD_FP_INFO 0x0403 + +/* Number of dead pixels detected on the last maintenance */ +#define FP_ERROR_DEAD_PIXELS(errors) ((errors) & 0x3FF) +/* Unknown number of dead pixels detected on the last maintenance */ +#define FP_ERROR_DEAD_PIXELS_UNKNOWN (0x3FF) +/* No interrupt from the sensor */ +#define FP_ERROR_NO_IRQ BIT(12) +/* SPI communication error */ +#define FP_ERROR_SPI_COMM BIT(13) +/* Invalid sensor Hardware ID */ +#define FP_ERROR_BAD_HWID BIT(14) +/* Sensor initialization failed */ +#define FP_ERROR_INIT_FAIL BIT(15) + +struct ec_response_fp_info_v0 { + /* Sensor identification */ + uint32_t vendor_id; + uint32_t product_id; + uint32_t model_id; + uint32_t version; + /* Image frame characteristics */ + uint32_t frame_size; + uint32_t pixel_format; /* using V4L2_PIX_FMT_ */ + uint16_t width; + uint16_t height; + uint16_t bpp; + uint16_t errors; /* see FP_ERROR_ flags above */ +} __ec_align4; + +struct ec_response_fp_info { + /* Sensor identification */ + uint32_t vendor_id; + uint32_t product_id; + uint32_t model_id; + uint32_t version; + /* Image frame characteristics */ + uint32_t frame_size; + uint32_t pixel_format; /* using V4L2_PIX_FMT_ */ + uint16_t width; + uint16_t height; + uint16_t bpp; + uint16_t errors; /* see FP_ERROR_ flags above */ + /* Template/finger current information */ + uint32_t template_size; /* max template size in bytes */ + uint16_t template_max; /* maximum number of fingers/templates */ + uint16_t template_valid; /* number of valid fingers/templates */ + uint32_t template_dirty; /* bitmap of templates with MCU side changes */ + uint32_t template_version; /* version of the template format */ +} __ec_align4; + +/* Get the last captured finger frame or a template content */ +#define EC_CMD_FP_FRAME 0x0404 + +/* constants defining the 'offset' field which also contains the frame index */ +#define FP_FRAME_INDEX_SHIFT 28 +/* Frame buffer where the captured image is stored */ +#define FP_FRAME_INDEX_RAW_IMAGE 0 +/* First frame buffer holding a template */ +#define FP_FRAME_INDEX_TEMPLATE 1 +#define FP_FRAME_GET_BUFFER_INDEX(offset) ((offset) >> FP_FRAME_INDEX_SHIFT) +#define FP_FRAME_OFFSET_MASK 0x0FFFFFFF + +/* Version of the format of the encrypted templates. */ +#define FP_TEMPLATE_FORMAT_VERSION 3 + +/* Constants for encryption parameters */ +#define FP_CONTEXT_NONCE_BYTES 12 +#define FP_CONTEXT_USERID_WORDS (32 / sizeof(uint32_t)) +#define FP_CONTEXT_TAG_BYTES 16 +#define FP_CONTEXT_SALT_BYTES 16 +#define FP_CONTEXT_TPM_BYTES 32 + +struct ec_fp_template_encryption_metadata { + /* + * Version of the structure format (N=3). + */ + uint16_t struct_version; + /* Reserved bytes, set to 0. */ + uint16_t reserved; + /* + * The salt is *only* ever used for key derivation. The nonce is unique, + * a different one is used for every message. + */ + uint8_t nonce[FP_CONTEXT_NONCE_BYTES]; + uint8_t salt[FP_CONTEXT_SALT_BYTES]; + uint8_t tag[FP_CONTEXT_TAG_BYTES]; +}; + +struct ec_params_fp_frame { + /* + * The offset contains the template index or FP_FRAME_INDEX_RAW_IMAGE + * in the high nibble, and the real offset within the frame in + * FP_FRAME_OFFSET_MASK. + */ + uint32_t offset; + uint32_t size; +} __ec_align4; + +/* Load a template into the MCU */ +#define EC_CMD_FP_TEMPLATE 0x0405 + +/* Flag in the 'size' field indicating that the full template has been sent */ +#define FP_TEMPLATE_COMMIT 0x80000000 + +struct ec_params_fp_template { + uint32_t offset; + uint32_t size; + uint8_t data[]; +} __ec_align4; + +/* Clear the current fingerprint user context and set a new one */ +#define EC_CMD_FP_CONTEXT 0x0406 + +struct ec_params_fp_context { + uint32_t userid[FP_CONTEXT_USERID_WORDS]; +} __ec_align4; + +#define EC_CMD_FP_STATS 0x0407 + +#define FPSTATS_CAPTURE_INV BIT(0) +#define FPSTATS_MATCHING_INV BIT(1) + +struct ec_response_fp_stats { + uint32_t capture_time_us; + uint32_t matching_time_us; + uint32_t overall_time_us; + struct { + uint32_t lo; + uint32_t hi; + } overall_t0; + uint8_t timestamps_invalid; + int8_t template_matched; +} __ec_align2; + +#define EC_CMD_FP_SEED 0x0408 +struct ec_params_fp_seed { + /* + * Version of the structure format (N=3). + */ + uint16_t struct_version; + /* Reserved bytes, set to 0. */ + uint16_t reserved; + /* Seed from the TPM. */ + uint8_t seed[FP_CONTEXT_TPM_BYTES]; +} __ec_align4; + +#define EC_CMD_FP_ENC_STATUS 0x0409 + +/* FP TPM seed has been set or not */ +#define FP_ENC_STATUS_SEED_SET BIT(0) + +struct ec_response_fp_encryption_status { + /* Used bits in encryption engine status */ + uint32_t valid_flags; + /* Encryption engine status */ + uint32_t status; +} __ec_align4; + +/*****************************************************************************/ +/* Touchpad MCU commands: range 0x0500-0x05FF */ + +/* Perform touchpad self test */ +#define EC_CMD_TP_SELF_TEST 0x0500 + +/* Get number of frame types, and the size of each type */ +#define EC_CMD_TP_FRAME_INFO 0x0501 + +struct ec_response_tp_frame_info { + uint32_t n_frames; + uint32_t frame_sizes[]; +} __ec_align4; + +/* Create a snapshot of current frame readings */ +#define EC_CMD_TP_FRAME_SNAPSHOT 0x0502 + +/* Read the frame */ +#define EC_CMD_TP_FRAME_GET 0x0503 + +struct ec_params_tp_frame_get { + uint32_t frame_index; + uint32_t offset; + uint32_t size; +} __ec_align4; + +/*****************************************************************************/ +/* EC-EC communication commands: range 0x0600-0x06FF */ + +#define EC_COMM_TEXT_MAX 8 + +/* + * Get battery static information, i.e. information that never changes, or + * very infrequently. + */ +#define EC_CMD_BATTERY_GET_STATIC 0x0600 + +/** + * struct ec_params_battery_static_info - Battery static info parameters + * @index: Battery index. + */ +struct ec_params_battery_static_info { + uint8_t index; +} __ec_align_size1; + +/** + * struct ec_response_battery_static_info - Battery static info response + * @design_capacity: Battery Design Capacity (mAh) + * @design_voltage: Battery Design Voltage (mV) + * @manufacturer: Battery Manufacturer String + * @model: Battery Model Number String + * @serial: Battery Serial Number String + * @type: Battery Type String + * @cycle_count: Battery Cycle Count + */ +struct ec_response_battery_static_info { + uint16_t design_capacity; + uint16_t design_voltage; + char manufacturer[EC_COMM_TEXT_MAX]; + char model[EC_COMM_TEXT_MAX]; + char serial[EC_COMM_TEXT_MAX]; + char type[EC_COMM_TEXT_MAX]; + /* TODO(crbug.com/795991): Consider moving to dynamic structure. */ + uint32_t cycle_count; +} __ec_align4; + +/* + * Get battery dynamic information, i.e. information that is likely to change + * every time it is read. + */ +#define EC_CMD_BATTERY_GET_DYNAMIC 0x0601 + +/** + * struct ec_params_battery_dynamic_info - Battery dynamic info parameters + * @index: Battery index. + */ +struct ec_params_battery_dynamic_info { + uint8_t index; +} __ec_align_size1; + +/** + * struct ec_response_battery_dynamic_info - Battery dynamic info response + * @actual_voltage: Battery voltage (mV) + * @actual_current: Battery current (mA); negative=discharging + * @remaining_capacity: Remaining capacity (mAh) + * @full_capacity: Capacity (mAh, might change occasionally) + * @flags: Flags, see EC_BATT_FLAG_* + * @desired_voltage: Charging voltage desired by battery (mV) + * @desired_current: Charging current desired by battery (mA) + */ +struct ec_response_battery_dynamic_info { + int16_t actual_voltage; + int16_t actual_current; + int16_t remaining_capacity; + int16_t full_capacity; + int16_t flags; + int16_t desired_voltage; + int16_t desired_current; +} __ec_align2; + +/* + * Control charger chip. Used to control charger chip on the slave. + */ +#define EC_CMD_CHARGER_CONTROL 0x0602 + +/** + * struct ec_params_charger_control - Charger control parameters + * @max_current: Charger current (mA). Positive to allow base to draw up to + * max_current and (possibly) charge battery, negative to request current + * from base (OTG). + * @otg_voltage: Voltage (mV) to use in OTG mode, ignored if max_current is + * >= 0. + * @allow_charging: Allow base battery charging (only makes sense if + * max_current > 0). + */ +struct ec_params_charger_control { + int16_t max_current; + uint16_t otg_voltage; + uint8_t allow_charging; +} __ec_align_size1; + +/* Get ACK from the USB-C SS muxes */ +#define EC_CMD_USB_PD_MUX_ACK 0x0603 + +struct ec_params_usb_pd_mux_ack { + uint8_t port; /* USB-C port number */ +} __ec_align1; + +/*****************************************************************************/ +/* + * Reserve a range of host commands for board-specific, experimental, or + * special purpose features. These can be (re)used without updating this file. + * + * CAUTION: Don't go nuts with this. Shipping products should document ALL + * their EC commands for easier development, testing, debugging, and support. + * + * All commands MUST be #defined to be 4-digit UPPER CASE hex values + * (e.g., 0x00AB, not 0xab) for CONFIG_HOSTCMD_SECTION_SORTED to work. + * + * In your experimental code, you may want to do something like this: + * + * #define EC_CMD_MAGIC_FOO 0x0000 + * #define EC_CMD_MAGIC_BAR 0x0001 + * #define EC_CMD_MAGIC_HEY 0x0002 + * + * DECLARE_PRIVATE_HOST_COMMAND(EC_CMD_MAGIC_FOO, magic_foo_handler, + * EC_VER_MASK(0); + * + * DECLARE_PRIVATE_HOST_COMMAND(EC_CMD_MAGIC_BAR, magic_bar_handler, + * EC_VER_MASK(0); + * + * DECLARE_PRIVATE_HOST_COMMAND(EC_CMD_MAGIC_HEY, magic_hey_handler, + * EC_VER_MASK(0); + */ +#define EC_CMD_BOARD_SPECIFIC_BASE 0x3E00 +#define EC_CMD_BOARD_SPECIFIC_LAST 0x3FFF + +/* + * Given the private host command offset, calculate the true private host + * command value. + */ +#define EC_PRIVATE_HOST_COMMAND_VALUE(command) \ + (EC_CMD_BOARD_SPECIFIC_BASE + (command)) + +/*****************************************************************************/ +/* + * Passthru commands + * + * Some platforms have sub-processors chained to each other. For example. + * + * AP <--> EC <--> PD MCU + * + * The top 2 bits of the command number are used to indicate which device the + * command is intended for. Device 0 is always the device receiving the + * command; other device mapping is board-specific. + * + * When a device receives a command to be passed to a sub-processor, it passes + * it on with the device number set back to 0. This allows the sub-processor + * to remain blissfully unaware of whether the command originated on the next + * device up the chain, or was passed through from the AP. + * + * In the above example, if the AP wants to send command 0x0002 to the PD MCU, + * AP sends command 0x4002 to the EC + * EC sends command 0x0002 to the PD MCU + * EC forwards PD MCU response back to the AP + */ + +/* Offset and max command number for sub-device n */ +#define EC_CMD_PASSTHRU_OFFSET(n) (0x4000 * (n)) +#define EC_CMD_PASSTHRU_MAX(n) (EC_CMD_PASSTHRU_OFFSET(n) + 0x3fff) + +/*****************************************************************************/ +/* + * Deprecated constants. These constants have been renamed for clarity. The + * meaning and size has not changed. Programs that use the old names should + * switch to the new names soon, as the old names may not be carried forward + * forever. + */ +#define EC_HOST_PARAM_SIZE EC_PROTO2_MAX_PARAM_SIZE +#define EC_LPC_ADDR_OLD_PARAM EC_HOST_CMD_REGION1 +#define EC_OLD_PARAM_SIZE EC_HOST_CMD_REGION_SIZE + + + +#endif /* __CROS_EC_COMMANDS_H */ diff --git a/include/linux/platform_data/cros_ec_proto.h b/include/linux/platform_data/cros_ec_proto.h new file mode 100644 index 000000000000..de14923720a5 --- /dev/null +++ b/include/linux/platform_data/cros_ec_proto.h @@ -0,0 +1,298 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * ChromeOS Embedded Controller protocol interface. + * + * Copyright (C) 2012 Google, Inc + */ + +#ifndef __LINUX_CROS_EC_PROTO_H +#define __LINUX_CROS_EC_PROTO_H + +#include <linux/device.h> +#include <linux/lockdep_types.h> +#include <linux/mutex.h> +#include <linux/notifier.h> + +#include <linux/platform_data/cros_ec_commands.h> + +#define CROS_EC_DEV_NAME "cros_ec" +#define CROS_EC_DEV_FP_NAME "cros_fp" +#define CROS_EC_DEV_ISH_NAME "cros_ish" +#define CROS_EC_DEV_PD_NAME "cros_pd" +#define CROS_EC_DEV_SCP_NAME "cros_scp" +#define CROS_EC_DEV_TP_NAME "cros_tp" + +#define CROS_EC_DEV_EC_INDEX 0 +#define CROS_EC_DEV_PD_INDEX 1 + +/* + * The EC is unresponsive for a time after a reboot command. Add a + * simple delay to make sure that the bus stays locked. + */ +#define EC_REBOOT_DELAY_MS 50 + +/* + * Max bus-specific overhead incurred by request/responses. + * + * Request: + * - I2C requires 1 byte (see struct ec_host_request_i2c). + * - ISHTP requires 4 bytes (see struct cros_ish_out_msg). + * + * Response: + * - I2C requires 2 bytes (see struct ec_host_response_i2c). + * - ISHTP requires 4 bytes (see struct cros_ish_in_msg). + * - SPI requires 32 bytes (see EC_MSG_PREAMBLE_COUNT). + */ +#define EC_PROTO_VERSION_UNKNOWN 0 +#define EC_MAX_REQUEST_OVERHEAD 4 +#define EC_MAX_RESPONSE_OVERHEAD 32 + +/* + * ACPI notify value for MKBP host event. + */ +#define ACPI_NOTIFY_CROS_EC_MKBP 0x80 + +/* + * EC panic is not covered by the standard (0-F) ACPI notify values. + * Arbitrarily choosing B0 to notify ec panic, which is in the 84-BF + * device specific ACPI notify range. + */ +#define ACPI_NOTIFY_CROS_EC_PANIC 0xB0 + +/* + * Command interface between EC and AP, for LPC, I2C and SPI interfaces. + */ +enum { + EC_MSG_TX_HEADER_BYTES = 3, + EC_MSG_TX_TRAILER_BYTES = 1, + EC_MSG_TX_PROTO_BYTES = EC_MSG_TX_HEADER_BYTES + + EC_MSG_TX_TRAILER_BYTES, + EC_MSG_RX_PROTO_BYTES = 3, + + /* Max length of messages for proto 2*/ + EC_PROTO2_MSG_BYTES = EC_PROTO2_MAX_PARAM_SIZE + + EC_MSG_TX_PROTO_BYTES, + + EC_MAX_MSG_BYTES = 64 * 1024, +}; + +/** + * struct cros_ec_command - Information about a ChromeOS EC command. + * @version: Command version number (often 0). + * @command: Command to send (EC_CMD_...). + * @outsize: Outgoing length in bytes. + * @insize: Max number of bytes to accept from the EC. + * @result: EC's response to the command (separate from communication failure). + * @data: Where to put the incoming data from EC and outgoing data to EC. + */ +struct cros_ec_command { + uint32_t version; + uint32_t command; + uint32_t outsize; + uint32_t insize; + uint32_t result; + uint8_t data[]; +}; + +/** + * struct cros_ec_device - Information about a ChromeOS EC device. + * @phys_name: Name of physical comms layer (e.g. 'i2c-4'). + * @dev: Device pointer for physical comms device + * @cros_class: The class structure for this device. + * @cmd_readmem: Direct read of the EC memory-mapped region, if supported. + * @offset: Is within EC_LPC_ADDR_MEMMAP region. + * @bytes: Number of bytes to read. zero means "read a string" (including + * the trailing '\0'). At most only EC_MEMMAP_SIZE bytes can be + * read. Caller must ensure that the buffer is large enough for the + * result when reading a string. + * @max_request: Max size of message requested. + * @max_response: Max size of message response. + * @max_passthru: Max sice of passthru message. + * @proto_version: The protocol version used for this device. + * @priv: Private data. + * @irq: Interrupt to use. + * @id: Device id. + * @din: Input buffer (for data from EC). This buffer will always be + * dword-aligned and include enough space for up to 7 word-alignment + * bytes also, so we can ensure that the body of the message is always + * dword-aligned (64-bit). We use this alignment to keep ARM and x86 + * happy. Probably word alignment would be OK, there might be a small + * performance advantage to using dword. + * @dout: Output buffer (for data to EC). This buffer will always be + * dword-aligned and include enough space for up to 7 word-alignment + * bytes also, so we can ensure that the body of the message is always + * dword-aligned (64-bit). We use this alignment to keep ARM and x86 + * happy. Probably word alignment would be OK, there might be a small + * performance advantage to using dword. + * @din_size: Size of din buffer to allocate (zero to use static din). + * @dout_size: Size of dout buffer to allocate (zero to use static dout). + * @wake_enabled: True if this device can wake the system from sleep. + * @suspended: True if this device had been suspended. + * @registered: True if this device had been registered. + * @cmd_xfer: Send command to EC and get response. + * Returns the number of bytes received if the communication + * succeeded, but that doesn't mean the EC was happy with the + * command. The caller should check msg.result for the EC's result + * code. + * @pkt_xfer: Send packet to EC and get response. + * @lockdep_key: Lockdep class for each instance. Unused if CONFIG_LOCKDEP is + * not enabled. + * @lock: One transaction at a time. + * @mkbp_event_supported: 0 if MKBP not supported. Otherwise its value is + * the maximum supported version of the MKBP host event + * command + 1. + * @host_sleep_v1: True if this EC supports the sleep v1 command. + * @event_notifier: Interrupt event notifier for transport devices. + * @event_data: Raw payload transferred with the MKBP event. + * @event_size: Size in bytes of the event data. + * @host_event_wake_mask: Mask of host events that cause wake from suspend. + * @suspend_timeout_ms: The timeout in milliseconds between when sleep event + * is received and when the EC will declare sleep + * transition failure if the sleep signal is not + * asserted. See also struct + * ec_params_host_sleep_event_v1 in cros_ec_commands.h. + * @last_resume_result: The number of sleep power signal transitions that + * occurred since the suspend message. The high bit + * indicates a timeout occurred. See also struct + * ec_response_host_sleep_event_v1 in cros_ec_commands.h. + * @last_event_time: exact time from the hard irq when we got notified of + * a new event. + * @notifier_ready: The notifier_block to let the kernel re-query EC + * communication protocol when the EC sends + * EC_HOST_EVENT_INTERFACE_READY. + * @ec: The platform_device used by the mfd driver to interface with the + * main EC. + * @pd: The platform_device used by the mfd driver to interface with the + * PD behind an EC. + * @panic_notifier: EC panic notifier. + */ +struct cros_ec_device { + /* These are used by other drivers that want to talk to the EC */ + const char *phys_name; + struct device *dev; + struct class *cros_class; + int (*cmd_readmem)(struct cros_ec_device *ec, unsigned int offset, + unsigned int bytes, void *dest); + + /* These are used to implement the platform-specific interface */ + u16 max_request; + u16 max_response; + u16 max_passthru; + u16 proto_version; + void *priv; + int irq; + u8 *din; + u8 *dout; + int din_size; + int dout_size; + bool wake_enabled; + bool suspended; + bool registered; + int (*cmd_xfer)(struct cros_ec_device *ec, + struct cros_ec_command *msg); + int (*pkt_xfer)(struct cros_ec_device *ec, + struct cros_ec_command *msg); + struct lock_class_key lockdep_key; + struct mutex lock; + u8 mkbp_event_supported; + bool host_sleep_v1; + struct blocking_notifier_head event_notifier; + + struct ec_response_get_next_event_v3 event_data; + int event_size; + u32 host_event_wake_mask; + u32 last_resume_result; + u16 suspend_timeout_ms; + ktime_t last_event_time; + struct notifier_block notifier_ready; + + /* The platform devices used by the mfd driver */ + struct platform_device *ec; + struct platform_device *pd; + + struct blocking_notifier_head panic_notifier; +}; + +/** + * struct cros_ec_platform - ChromeOS EC platform information. + * @ec_name: Name of EC device (e.g. 'cros-ec', 'cros-pd', ...) + * used in /dev/ and sysfs. + * @cmd_offset: Offset to apply for each command. Set when + * registering a device behind another one. + */ +struct cros_ec_platform { + const char *ec_name; + u16 cmd_offset; +}; + +/** + * struct cros_ec_dev - ChromeOS EC device entry point. + * @class_dev: Device structure used in sysfs. + * @ec_dev: cros_ec_device structure to talk to the physical device. + * @dev: Pointer to the platform device. + * @debug_info: cros_ec_debugfs structure for debugging information. + * @has_kb_wake_angle: True if at least 2 accelerometer are connected to the EC. + * @cmd_offset: Offset to apply for each command. + * @features: Features supported by the EC. + */ +struct cros_ec_dev { + struct device class_dev; + struct cros_ec_device *ec_dev; + struct device *dev; + struct cros_ec_debugfs *debug_info; + bool has_kb_wake_angle; + u16 cmd_offset; + struct ec_response_get_features features; +}; + +#define to_cros_ec_dev(dev) container_of(dev, struct cros_ec_dev, class_dev) + +int cros_ec_prepare_tx(struct cros_ec_device *ec_dev, + struct cros_ec_command *msg); + +int cros_ec_check_result(struct cros_ec_device *ec_dev, + struct cros_ec_command *msg); + +int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev, + struct cros_ec_command *msg); + +int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev, + struct cros_ec_command *msg); + +int cros_ec_rwsig_continue(struct cros_ec_device *ec_dev); + +int cros_ec_query_all(struct cros_ec_device *ec_dev); + +int cros_ec_get_next_event(struct cros_ec_device *ec_dev, + bool *wake_event, + bool *has_more_events); + +u32 cros_ec_get_host_event(struct cros_ec_device *ec_dev); + +bool cros_ec_check_features(struct cros_ec_dev *ec, int feature); + +int cros_ec_get_sensor_count(struct cros_ec_dev *ec); + +int cros_ec_cmd(struct cros_ec_device *ec_dev, unsigned int version, int command, const void *outdata, + size_t outsize, void *indata, size_t insize); + +int cros_ec_cmd_readmem(struct cros_ec_device *ec_dev, u8 offset, u8 size, void *dest); + +int cros_ec_get_cmd_versions(struct cros_ec_device *ec_dev, u16 cmd); + +bool cros_ec_device_registered(struct cros_ec_device *ec_dev); + +/** + * cros_ec_get_time_ns() - Return time in ns. + * + * This is the function used to record the time for last_event_time in struct + * cros_ec_device during the hard irq. + * + * Return: ktime_t format since boot. + */ +static inline ktime_t cros_ec_get_time_ns(void) +{ + return ktime_get_boottime_ns(); +} + +#endif /* __LINUX_CROS_EC_PROTO_H */ diff --git a/include/linux/platform_data/cros_ec_sensorhub.h b/include/linux/platform_data/cros_ec_sensorhub.h new file mode 100644 index 000000000000..0ecce6aa69d5 --- /dev/null +++ b/include/linux/platform_data/cros_ec_sensorhub.h @@ -0,0 +1,194 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Chrome OS EC MEMS Sensor Hub driver. + * + * Copyright 2019 Google LLC + */ + +#ifndef __LINUX_PLATFORM_DATA_CROS_EC_SENSORHUB_H +#define __LINUX_PLATFORM_DATA_CROS_EC_SENSORHUB_H + +#include <linux/ktime.h> +#include <linux/mutex.h> +#include <linux/notifier.h> +#include <linux/platform_data/cros_ec_commands.h> + +struct iio_dev; + +/** + * struct cros_ec_sensor_platform - ChromeOS EC sensor platform information. + * @sensor_num: Id of the sensor, as reported by the EC. + */ +struct cros_ec_sensor_platform { + u8 sensor_num; +}; + +/** + * typedef cros_ec_sensorhub_push_data_cb_t - Callback function to send datum + * to specific sensors. + * + * @indio_dev: The IIO device that will process the sample. + * @data: Vector array of the ring sample. + * @timestamp: Timestamp in host timespace when the sample was acquired by + * the EC. + */ +typedef int (*cros_ec_sensorhub_push_data_cb_t)(struct iio_dev *indio_dev, + s16 *data, + s64 timestamp); + +struct cros_ec_sensorhub_sensor_push_data { + struct iio_dev *indio_dev; + cros_ec_sensorhub_push_data_cb_t push_data_cb; +}; + +enum { + CROS_EC_SENSOR_LAST_TS, + CROS_EC_SENSOR_NEW_TS, + CROS_EC_SENSOR_ALL_TS +}; + +struct cros_ec_sensors_ring_sample { + u8 sensor_id; + u8 flag; + s16 vector[3]; + s64 timestamp; +} __packed; + +/* State used for cros_ec_ring_fix_overflow */ +struct cros_ec_sensors_ec_overflow_state { + s64 offset; + s64 last; +}; + +/* Length of the filter, how long to remember entries for */ +#define CROS_EC_SENSORHUB_TS_HISTORY_SIZE 64 + +/** + * struct cros_ec_sensors_ts_filter_state - Timestamp filetr state. + * + * @x_offset: x is EC interrupt time. x_offset its last value. + * @y_offset: y is the difference between AP and EC time, y_offset its last + * value. + * @x_history: The past history of x, relative to x_offset. + * @y_history: The past history of y, relative to y_offset. + * @m_history: rate between y and x. + * @history_len: Amount of valid historic data in the arrays. + * @temp_buf: Temporary buffer used when updating the filter. + * @median_m: median value of m_history + * @median_error: final error to apply to AP interrupt timestamp to get the + * "true timestamp" the event occurred. + */ +struct cros_ec_sensors_ts_filter_state { + s64 x_offset, y_offset; + s64 x_history[CROS_EC_SENSORHUB_TS_HISTORY_SIZE]; + s64 y_history[CROS_EC_SENSORHUB_TS_HISTORY_SIZE]; + s64 m_history[CROS_EC_SENSORHUB_TS_HISTORY_SIZE]; + int history_len; + + s64 temp_buf[CROS_EC_SENSORHUB_TS_HISTORY_SIZE]; + + s64 median_m; + s64 median_error; +}; + +/* struct cros_ec_sensors_ts_batch_state - State of batch of a single sensor. + * + * Use to store information to batch data using median fileter information. + * + * @penul_ts: last but one batch timestamp (penultimate timestamp). + * Used for timestamp spreading calculations + * when a batch shows up. + * @penul_len: last but one batch length. + * @last_ts: Last batch timestam. + * @last_len: Last batch length. + * @newest_sensor_event: Last sensor timestamp. + */ +struct cros_ec_sensors_ts_batch_state { + s64 penul_ts; + int penul_len; + s64 last_ts; + int last_len; + s64 newest_sensor_event; +}; + +/* + * struct cros_ec_sensorhub - Sensor Hub device data. + * + * @dev: Device object, mostly used for logging. + * @ec: Embedded Controller where the hub is located. + * @sensor_num: Number of MEMS sensors present in the EC. + * @msg: Structure to send FIFO requests. + * @params: Pointer to parameters in msg. + * @resp: Pointer to responses in msg. + * @cmd_lock : Lock for sending msg. + * @notifier: Notifier to kick the FIFO interrupt. + * @ring: Preprocessed ring to store events. + * @fifo_timestamp: Array for event timestamp and spreading. + * @fifo_info: Copy of FIFO information coming from the EC. + * @fifo_size: Size of the ring. + * @batch_state: Per sensor information of the last batches received. + * @overflow_a: For handling timestamp overflow for a time (sensor events) + * @overflow_b: For handling timestamp overflow for b time (ec interrupts) + * @filter: Medium fileter structure. + * @tight_timestamps: Set to truen when EC support tight timestamping: + * The timestamps reported from the EC have low jitter. + * Timestamps also come before every sample. Set either + * by feature bits coming from the EC or userspace. + * @future_timestamp_count: Statistics used to compute shaved time. + * This occurs when timestamp interpolation from EC + * time to AP time accidentally puts timestamps in + * the future. These timestamps are clamped to + * `now` and these count/total_ns maintain the + * statistics for how much time was removed in a + * given period. + * @future_timestamp_total_ns: Total amount of time shaved. + * @push_data: Array of callback to send datums to iio sensor object. + */ +struct cros_ec_sensorhub { + struct device *dev; + struct cros_ec_dev *ec; + int sensor_num; + + struct cros_ec_command *msg; + struct ec_params_motion_sense *params; + struct ec_response_motion_sense *resp; + struct mutex cmd_lock; /* Lock for protecting msg structure. */ + + struct notifier_block notifier; + + struct cros_ec_sensors_ring_sample *ring; + + ktime_t fifo_timestamp[CROS_EC_SENSOR_ALL_TS]; + struct ec_response_motion_sense_fifo_info *fifo_info; + int fifo_size; + + struct cros_ec_sensors_ts_batch_state *batch_state; + + struct cros_ec_sensors_ec_overflow_state overflow_a; + struct cros_ec_sensors_ec_overflow_state overflow_b; + + struct cros_ec_sensors_ts_filter_state filter; + + int tight_timestamps; + + s32 future_timestamp_count; + s64 future_timestamp_total_ns; + + struct cros_ec_sensorhub_sensor_push_data *push_data; +}; + +int cros_ec_sensorhub_register_push_data(struct cros_ec_sensorhub *sensorhub, + u8 sensor_num, + struct iio_dev *indio_dev, + cros_ec_sensorhub_push_data_cb_t cb); + +void cros_ec_sensorhub_unregister_push_data(struct cros_ec_sensorhub *sensorhub, + u8 sensor_num); + +int cros_ec_sensorhub_ring_allocate(struct cros_ec_sensorhub *sensorhub); +int cros_ec_sensorhub_ring_add(struct cros_ec_sensorhub *sensorhub); +void cros_ec_sensorhub_ring_remove(void *arg); +int cros_ec_sensorhub_ring_fifo_enable(struct cros_ec_sensorhub *sensorhub, + bool on); + +#endif /* __LINUX_PLATFORM_DATA_CROS_EC_SENSORHUB_H */ diff --git a/include/linux/platform_data/cros_usbpd_notify.h b/include/linux/platform_data/cros_usbpd_notify.h new file mode 100644 index 000000000000..4f2791722b6d --- /dev/null +++ b/include/linux/platform_data/cros_usbpd_notify.h @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * ChromeOS EC Power Delivery Notifier Driver + * + * Copyright 2020 Google LLC + */ + +#ifndef __LINUX_PLATFORM_DATA_CROS_USBPD_NOTIFY_H +#define __LINUX_PLATFORM_DATA_CROS_USBPD_NOTIFY_H + +#include <linux/notifier.h> + +int cros_usbpd_register_notify(struct notifier_block *nb); + +void cros_usbpd_unregister_notify(struct notifier_block *nb); + +#endif /* __LINUX_PLATFORM_DATA_CROS_USBPD_NOTIFY_H */ diff --git a/include/linux/platform_data/crypto-atmel.h b/include/linux/platform_data/crypto-atmel.h deleted file mode 100644 index 0471aaf6999b..000000000000 --- a/include/linux/platform_data/crypto-atmel.h +++ /dev/null @@ -1,23 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __LINUX_CRYPTO_ATMEL_H -#define __LINUX_CRYPTO_ATMEL_H - -#include <linux/platform_data/dma-atmel.h> - -/** - * struct crypto_dma_data - DMA data for AES/TDES/SHA - */ -struct crypto_dma_data { - struct at_dma_slave txdata; - struct at_dma_slave rxdata; -}; - -/** - * struct crypto_platform_data - board-specific AES/TDES/SHA configuration - * @dma_slave: DMA slave interface to use in data transfers. - */ -struct crypto_platform_data { - struct crypto_dma_data *dma_slave; -}; - -#endif /* __LINUX_CRYPTO_ATMEL_H */ diff --git a/include/linux/platform_data/crypto-ux500.h b/include/linux/platform_data/crypto-ux500.h index 94df96d9a336..5d43350e32cc 100644 --- a/include/linux/platform_data/crypto-ux500.h +++ b/include/linux/platform_data/crypto-ux500.h @@ -1,8 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) ST-Ericsson SA 2011 * * Author: Joakim Bech <joakim.xx.bech@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 */ #ifndef _CRYPTO_UX500_H #define _CRYPTO_UX500_H diff --git a/include/linux/platform_data/cyttsp4.h b/include/linux/platform_data/cyttsp4.h deleted file mode 100644 index 6eba54aff1dc..000000000000 --- a/include/linux/platform_data/cyttsp4.h +++ /dev/null @@ -1,76 +0,0 @@ -/* - * Header file for: - * Cypress TrueTouch(TM) Standard Product (TTSP) touchscreen drivers. - * For use with Cypress Txx3xx parts. - * Supported parts include: - * CY8CTST341 - * CY8CTMA340 - * - * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc. - * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2, and only version 2, as published by the - * Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - * - * Contact Cypress Semiconductor at www.cypress.com (kev@cypress.com) - * - */ -#ifndef _CYTTSP4_H_ -#define _CYTTSP4_H_ - -#define CYTTSP4_MT_NAME "cyttsp4_mt" -#define CYTTSP4_I2C_NAME "cyttsp4_i2c_adapter" -#define CYTTSP4_SPI_NAME "cyttsp4_spi_adapter" - -#define CY_TOUCH_SETTINGS_MAX 32 - -struct touch_framework { - const uint16_t *abs; - uint8_t size; - uint8_t enable_vkeys; -} __packed; - -struct cyttsp4_mt_platform_data { - struct touch_framework *frmwrk; - unsigned short flags; - char const *inp_dev_name; -}; - -struct touch_settings { - const uint8_t *data; - uint32_t size; - uint8_t tag; -} __packed; - -struct cyttsp4_core_platform_data { - int irq_gpio; - int rst_gpio; - int level_irq_udelay; - int (*xres)(struct cyttsp4_core_platform_data *pdata, - struct device *dev); - int (*init)(struct cyttsp4_core_platform_data *pdata, - int on, struct device *dev); - int (*power)(struct cyttsp4_core_platform_data *pdata, - int on, struct device *dev, atomic_t *ignore_irq); - int (*irq_stat)(struct cyttsp4_core_platform_data *pdata, - struct device *dev); - struct touch_settings *sett[CY_TOUCH_SETTINGS_MAX]; -}; - -struct cyttsp4_platform_data { - struct cyttsp4_core_platform_data *core_pdata; - struct cyttsp4_mt_platform_data *mt_pdata; -}; - -#endif /* _CYTTSP4_H_ */ diff --git a/include/linux/platform_data/davinci-cpufreq.h b/include/linux/platform_data/davinci-cpufreq.h new file mode 100644 index 000000000000..1ef91c36f609 --- /dev/null +++ b/include/linux/platform_data/davinci-cpufreq.h @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * TI DaVinci CPUFreq platform support. + * + * Copyright (C) 2009 Texas Instruments, Inc. https://www.ti.com/ + */ + +#ifndef _MACH_DAVINCI_CPUFREQ_H +#define _MACH_DAVINCI_CPUFREQ_H + +#include <linux/cpufreq.h> + +struct davinci_cpufreq_config { + struct cpufreq_frequency_table *freq_table; + int (*set_voltage)(unsigned int index); + int (*init)(void); +}; + +#ifdef CONFIG_CPU_FREQ +int davinci_cpufreq_init(void); +#else +static inline int davinci_cpufreq_init(void) { return 0; } +#endif + +#endif /* _MACH_DAVINCI_CPUFREQ_H */ diff --git a/include/linux/platform_data/davinci_asp.h b/include/linux/platform_data/davinci_asp.h index 7fe80f1c7e08..b9c8520b4bd3 100644 --- a/include/linux/platform_data/davinci_asp.h +++ b/include/linux/platform_data/davinci_asp.h @@ -1,16 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * TI DaVinci Audio Serial Port support * - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */ #ifndef __DAVINCI_ASP_H @@ -34,16 +26,6 @@ struct davinci_mcasp_pdata { struct gen_pool *sram_pool; /* - * If McBSP peripheral gets the clock from an external pin, - * there are three chooses, that are MCBSP_CLKX, MCBSP_CLKR - * and MCBSP_CLKS. - * Depending on different hardware connections it is possible - * to use this setting to change the behaviour of McBSP - * driver. - */ - int clk_input_pin; - - /* * This flag works when both clock and FS are outputs for the cpu * and makes clock more accurate (FS is not symmetrical and the * clock is very fast. @@ -96,11 +78,7 @@ enum { MCASP_VERSION_2, /* DA8xx/OMAPL1x */ MCASP_VERSION_3, /* TI81xx/AM33xx */ MCASP_VERSION_4, /* DRA7xxx */ -}; - -enum mcbsp_clk_input_pin { - MCBSP_CLKR = 0, /* as in DM365 */ - MCBSP_CLKS, + MCASP_VERSION_OMAP, /* OMAP4/5 */ }; #define INACTIVE_MODE 0 diff --git a/include/linux/platform_data/db8500_thermal.h b/include/linux/platform_data/db8500_thermal.h deleted file mode 100644 index 3bf60902e902..000000000000 --- a/include/linux/platform_data/db8500_thermal.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * db8500_thermal.h - DB8500 Thermal Management Implementation - * - * Copyright (C) 2012 ST-Ericsson - * Copyright (C) 2012 Linaro Ltd. - * - * Author: Hongbo Zhang <hongbo.zhang@linaro.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef _DB8500_THERMAL_H_ -#define _DB8500_THERMAL_H_ - -#include <linux/thermal.h> - -#define COOLING_DEV_MAX 8 - -struct db8500_trip_point { - unsigned long temp; - enum thermal_trip_type type; - char cdev_name[COOLING_DEV_MAX][THERMAL_NAME_LENGTH]; -}; - -struct db8500_thsens_platform_data { - struct db8500_trip_point trip_points[THERMAL_MAX_TRIPS]; - int num_trips; -}; - -#endif /* _DB8500_THERMAL_H_ */ diff --git a/include/linux/platform_data/dma-atmel.h b/include/linux/platform_data/dma-atmel.h deleted file mode 100644 index e95f19c65873..000000000000 --- a/include/linux/platform_data/dma-atmel.h +++ /dev/null @@ -1,65 +0,0 @@ -/* - * Header file for the Atmel AHB DMA Controller driver - * - * Copyright (C) 2008 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ -#ifndef AT_HDMAC_H -#define AT_HDMAC_H - -#include <linux/dmaengine.h> - -/** - * struct at_dma_platform_data - Controller configuration parameters - * @nr_channels: Number of channels supported by hardware (max 8) - * @cap_mask: dma_capability flags supported by the platform - */ -struct at_dma_platform_data { - unsigned int nr_channels; - dma_cap_mask_t cap_mask; -}; - -/** - * struct at_dma_slave - Controller-specific information about a slave - * @dma_dev: required DMA master device - * @cfg: Platform-specific initializer for the CFG register - */ -struct at_dma_slave { - struct device *dma_dev; - u32 cfg; -}; - - -/* Platform-configurable bits in CFG */ -#define ATC_PER_MSB(h) ((0x30U & (h)) >> 4) /* Extract most significant bits of a handshaking identifier */ - -#define ATC_SRC_PER(h) (0xFU & (h)) /* Channel src rq associated with periph handshaking ifc h */ -#define ATC_DST_PER(h) ((0xFU & (h)) << 4) /* Channel dst rq associated with periph handshaking ifc h */ -#define ATC_SRC_REP (0x1 << 8) /* Source Replay Mod */ -#define ATC_SRC_H2SEL (0x1 << 9) /* Source Handshaking Mod */ -#define ATC_SRC_H2SEL_SW (0x0 << 9) -#define ATC_SRC_H2SEL_HW (0x1 << 9) -#define ATC_SRC_PER_MSB(h) (ATC_PER_MSB(h) << 10) /* Channel src rq (most significant bits) */ -#define ATC_DST_REP (0x1 << 12) /* Destination Replay Mod */ -#define ATC_DST_H2SEL (0x1 << 13) /* Destination Handshaking Mod */ -#define ATC_DST_H2SEL_SW (0x0 << 13) -#define ATC_DST_H2SEL_HW (0x1 << 13) -#define ATC_DST_PER_MSB(h) (ATC_PER_MSB(h) << 14) /* Channel dst rq (most significant bits) */ -#define ATC_SOD (0x1 << 16) /* Stop On Done */ -#define ATC_LOCK_IF (0x1 << 20) /* Interface Lock */ -#define ATC_LOCK_B (0x1 << 21) /* AHB Bus Lock */ -#define ATC_LOCK_IF_L (0x1 << 22) /* Master Interface Arbiter Lock */ -#define ATC_LOCK_IF_L_CHUNK (0x0 << 22) -#define ATC_LOCK_IF_L_BUFFER (0x1 << 22) -#define ATC_AHB_PROT_MASK (0x7 << 24) /* AHB Protection */ -#define ATC_FIFOCFG_MASK (0x3 << 28) /* FIFO Request Configuration */ -#define ATC_FIFOCFG_LARGESTBURST (0x0 << 28) -#define ATC_FIFOCFG_HALFFIFO (0x1 << 28) -#define ATC_FIFOCFG_ENOUGHSPACE (0x2 << 28) - - -#endif /* AT_HDMAC_H */ diff --git a/include/linux/platform_data/dma-coh901318.h b/include/linux/platform_data/dma-coh901318.h deleted file mode 100644 index c4cb9590d115..000000000000 --- a/include/linux/platform_data/dma-coh901318.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - * Platform data for the COH901318 DMA controller - * Copyright (C) 2007-2013 ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - */ - -#ifndef PLAT_COH901318_H -#define PLAT_COH901318_H - -#ifdef CONFIG_COH901318 - -/* We only support the U300 DMA channels */ -#define U300_DMA_MSL_TX_0 0 -#define U300_DMA_MSL_TX_1 1 -#define U300_DMA_MSL_TX_2 2 -#define U300_DMA_MSL_TX_3 3 -#define U300_DMA_MSL_TX_4 4 -#define U300_DMA_MSL_TX_5 5 -#define U300_DMA_MSL_TX_6 6 -#define U300_DMA_MSL_RX_0 7 -#define U300_DMA_MSL_RX_1 8 -#define U300_DMA_MSL_RX_2 9 -#define U300_DMA_MSL_RX_3 10 -#define U300_DMA_MSL_RX_4 11 -#define U300_DMA_MSL_RX_5 12 -#define U300_DMA_MSL_RX_6 13 -#define U300_DMA_MMCSD_RX_TX 14 -#define U300_DMA_MSPRO_TX 15 -#define U300_DMA_MSPRO_RX 16 -#define U300_DMA_UART0_TX 17 -#define U300_DMA_UART0_RX 18 -#define U300_DMA_APEX_TX 19 -#define U300_DMA_APEX_RX 20 -#define U300_DMA_PCM_I2S0_TX 21 -#define U300_DMA_PCM_I2S0_RX 22 -#define U300_DMA_PCM_I2S1_TX 23 -#define U300_DMA_PCM_I2S1_RX 24 -#define U300_DMA_XGAM_CDI 25 -#define U300_DMA_XGAM_PDI 26 -#define U300_DMA_SPI_TX 27 -#define U300_DMA_SPI_RX 28 -#define U300_DMA_GENERAL_PURPOSE_0 29 -#define U300_DMA_GENERAL_PURPOSE_1 30 -#define U300_DMA_GENERAL_PURPOSE_2 31 -#define U300_DMA_GENERAL_PURPOSE_3 32 -#define U300_DMA_GENERAL_PURPOSE_4 33 -#define U300_DMA_GENERAL_PURPOSE_5 34 -#define U300_DMA_GENERAL_PURPOSE_6 35 -#define U300_DMA_GENERAL_PURPOSE_7 36 -#define U300_DMA_GENERAL_PURPOSE_8 37 -#define U300_DMA_UART1_TX 38 -#define U300_DMA_UART1_RX 39 - -#define U300_DMA_DEVICE_CHANNELS 32 -#define U300_DMA_CHANNELS 40 - -/** - * coh901318_filter_id() - DMA channel filter function - * @chan: dma channel handle - * @chan_id: id of dma channel to be filter out - * - * In dma_request_channel() it specifies what channel id to be requested - */ -bool coh901318_filter_id(struct dma_chan *chan, void *chan_id); -#else -static inline bool coh901318_filter_id(struct dma_chan *chan, void *chan_id) -{ - return false; -} -#endif - -#endif /* PLAT_COH901318_H */ diff --git a/include/linux/platform_data/dma-dw.h b/include/linux/platform_data/dma-dw.h index 1a1d58ebffbf..860ba4bc5ead 100644 --- a/include/linux/platform_data/dma-dw.h +++ b/include/linux/platform_data/dma-dw.h @@ -1,20 +1,22 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Driver for the Synopsys DesignWare DMA Controller * * Copyright (C) 2007 Atmel Corporation * Copyright (C) 2010-2011 ST Microelectronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _PLATFORM_DATA_DMA_DW_H #define _PLATFORM_DATA_DMA_DW_H -#include <linux/device.h> +#include <linux/bits.h> +#include <linux/types.h> #define DW_DMA_MAX_NR_MASTERS 4 #define DW_DMA_MAX_NR_CHANNELS 8 +#define DW_DMA_MIN_BURST 1 +#define DW_DMA_MAX_BURST 256 + +struct device; /** * struct dw_dma_slave - Controller-specific information about a slave @@ -24,6 +26,7 @@ * @dst_id: dst request line * @m_master: memory master for transfers on allocated channel * @p_master: peripheral master for transfers on allocated channel + * @channels: mask of the channels permitted for allocation (zero value means any) * @hs_polarity:set active low polarity of handshake interface */ struct dw_dma_slave { @@ -32,45 +35,45 @@ struct dw_dma_slave { u8 dst_id; u8 m_master; u8 p_master; + u8 channels; bool hs_polarity; }; /** * struct dw_dma_platform_data - Controller configuration parameters + * @nr_masters: Number of AHB masters supported by the controller * @nr_channels: Number of channels supported by hardware (max 8) - * @is_private: The device channels should be marked as private and not for - * by the general purpose DMA channel allocator. - * @is_memcpy: The device channels do support memory-to-memory transfers. - * @is_idma32: The type of the DMA controller is iDMA32 * @chan_allocation_order: Allocate channels starting from 0 or 7 * @chan_priority: Set channel priority increasing from 0 to 7 or 7 to 0. * @block_size: Maximum block size supported by the controller - * @nr_masters: Number of AHB masters supported by the controller * @data_width: Maximum data width supported by hardware per AHB master * (in bytes, power of 2) * @multi_block: Multi block transfers supported by hardware per channel. + * @max_burst: Maximum value of burst transaction size supported by hardware + * per channel (in units of CTL.SRC_TR_WIDTH/CTL.DST_TR_WIDTH). * @protctl: Protection control signals setting per channel. + * @quirks: Optional platform quirks. */ struct dw_dma_platform_data { - unsigned int nr_channels; - bool is_private; - bool is_memcpy; - bool is_idma32; + u32 nr_masters; + u32 nr_channels; #define CHAN_ALLOCATION_ASCENDING 0 /* zero to seven */ #define CHAN_ALLOCATION_DESCENDING 1 /* seven to zero */ - unsigned char chan_allocation_order; + u32 chan_allocation_order; #define CHAN_PRIORITY_ASCENDING 0 /* chan0 highest */ #define CHAN_PRIORITY_DESCENDING 1 /* chan7 highest */ - unsigned char chan_priority; - unsigned int block_size; - unsigned char nr_masters; - unsigned char data_width[DW_DMA_MAX_NR_MASTERS]; - unsigned char multi_block[DW_DMA_MAX_NR_CHANNELS]; + u32 chan_priority; + u32 block_size; + u32 data_width[DW_DMA_MAX_NR_MASTERS]; + u32 multi_block[DW_DMA_MAX_NR_CHANNELS]; + u32 max_burst[DW_DMA_MAX_NR_CHANNELS]; #define CHAN_PROTCTL_PRIVILEGED BIT(0) #define CHAN_PROTCTL_BUFFERABLE BIT(1) #define CHAN_PROTCTL_CACHEABLE BIT(2) #define CHAN_PROTCTL_MASK GENMASK(2, 0) - unsigned char protctl; + u32 protctl; +#define DW_DMA_QUIRK_XBAR_PRESENT BIT(0) + u32 quirks; }; #endif /* _PLATFORM_DATA_DMA_DW_H */ diff --git a/include/linux/platform_data/dma-ep93xx.h b/include/linux/platform_data/dma-ep93xx.h deleted file mode 100644 index eb9805bb3fe8..000000000000 --- a/include/linux/platform_data/dma-ep93xx.h +++ /dev/null @@ -1,94 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -#include <linux/types.h> -#include <linux/dmaengine.h> -#include <linux/dma-mapping.h> - -/* - * M2P channels. - * - * Note that these values are also directly used for setting the PPALLOC - * register. - */ -#define EP93XX_DMA_I2S1 0 -#define EP93XX_DMA_I2S2 1 -#define EP93XX_DMA_AAC1 2 -#define EP93XX_DMA_AAC2 3 -#define EP93XX_DMA_AAC3 4 -#define EP93XX_DMA_I2S3 5 -#define EP93XX_DMA_UART1 6 -#define EP93XX_DMA_UART2 7 -#define EP93XX_DMA_UART3 8 -#define EP93XX_DMA_IRDA 9 -/* M2M channels */ -#define EP93XX_DMA_SSP 10 -#define EP93XX_DMA_IDE 11 - -/** - * struct ep93xx_dma_data - configuration data for the EP93xx dmaengine - * @port: peripheral which is requesting the channel - * @direction: TX/RX channel - * @name: optional name for the channel, this is displayed in /proc/interrupts - * - * This information is passed as private channel parameter in a filter - * function. Note that this is only needed for slave/cyclic channels. For - * memcpy channels %NULL data should be passed. - */ -struct ep93xx_dma_data { - int port; - enum dma_transfer_direction direction; - const char *name; -}; - -/** - * struct ep93xx_dma_chan_data - platform specific data for a DMA channel - * @name: name of the channel, used for getting the right clock for the channel - * @base: mapped registers - * @irq: interrupt number used by this channel - */ -struct ep93xx_dma_chan_data { - const char *name; - void __iomem *base; - int irq; -}; - -/** - * struct ep93xx_dma_platform_data - platform data for the dmaengine driver - * @channels: array of channels which are passed to the driver - * @num_channels: number of channels in the array - * - * This structure is passed to the DMA engine driver via platform data. For - * M2P channels, contract is that even channels are for TX and odd for RX. - * There is no requirement for the M2M channels. - */ -struct ep93xx_dma_platform_data { - struct ep93xx_dma_chan_data *channels; - size_t num_channels; -}; - -static inline bool ep93xx_dma_chan_is_m2p(struct dma_chan *chan) -{ - return !strcmp(dev_name(chan->device->dev), "ep93xx-dma-m2p"); -} - -/** - * ep93xx_dma_chan_direction - returns direction the channel can be used - * @chan: channel - * - * This function can be used in filter functions to find out whether the - * channel supports given DMA direction. Only M2P channels have such - * limitation, for M2M channels the direction is configurable. - */ -static inline enum dma_transfer_direction -ep93xx_dma_chan_direction(struct dma_chan *chan) -{ - if (!ep93xx_dma_chan_is_m2p(chan)) - return DMA_TRANS_NONE; - - /* even channels are for TX, odd for RX */ - return (chan->chan_id % 2 == 0) ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM; -} - -#endif /* __ASM_ARCH_DMA_H */ diff --git a/include/linux/platform_data/dma-hsu.h b/include/linux/platform_data/dma-hsu.h index 3453fa655502..611bae193c1c 100644 --- a/include/linux/platform_data/dma-hsu.h +++ b/include/linux/platform_data/dma-hsu.h @@ -1,17 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Driver for the High Speed UART DMA * * Copyright (C) 2015 Intel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _PLATFORM_DATA_DMA_HSU_H #define _PLATFORM_DATA_DMA_HSU_H -#include <linux/device.h> +struct device; struct hsu_dma_slave { struct device *dma_dev; diff --git a/include/linux/platform_data/dma-imx-sdma.h b/include/linux/platform_data/dma-imx-sdma.h deleted file mode 100644 index 6eaa53cef0bd..000000000000 --- a/include/linux/platform_data/dma-imx-sdma.h +++ /dev/null @@ -1,68 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __MACH_MXC_SDMA_H__ -#define __MACH_MXC_SDMA_H__ - -/** - * struct sdma_script_start_addrs - SDMA script start pointers - * - * start addresses of the different functions in the physical - * address space of the SDMA engine. - */ -struct sdma_script_start_addrs { - s32 ap_2_ap_addr; - s32 ap_2_bp_addr; - s32 ap_2_ap_fixed_addr; - s32 bp_2_ap_addr; - s32 loopback_on_dsp_side_addr; - s32 mcu_interrupt_only_addr; - s32 firi_2_per_addr; - s32 firi_2_mcu_addr; - s32 per_2_firi_addr; - s32 mcu_2_firi_addr; - s32 uart_2_per_addr; - s32 uart_2_mcu_addr; - s32 per_2_app_addr; - s32 mcu_2_app_addr; - s32 per_2_per_addr; - s32 uartsh_2_per_addr; - s32 uartsh_2_mcu_addr; - s32 per_2_shp_addr; - s32 mcu_2_shp_addr; - s32 ata_2_mcu_addr; - s32 mcu_2_ata_addr; - s32 app_2_per_addr; - s32 app_2_mcu_addr; - s32 shp_2_per_addr; - s32 shp_2_mcu_addr; - s32 mshc_2_mcu_addr; - s32 mcu_2_mshc_addr; - s32 spdif_2_mcu_addr; - s32 mcu_2_spdif_addr; - s32 asrc_2_mcu_addr; - s32 ext_mem_2_ipu_addr; - s32 descrambler_addr; - s32 dptc_dvfs_addr; - s32 utra_addr; - s32 ram_code_start_addr; - /* End of v1 array */ - s32 mcu_2_ssish_addr; - s32 ssish_2_mcu_addr; - s32 hdmi_dma_addr; - /* End of v2 array */ - s32 zcanfd_2_mcu_addr; - s32 zqspi_2_mcu_addr; - /* End of v3 array */ -}; - -/** - * struct sdma_platform_data - platform specific data for SDMA engine - * - * @fw_name The firmware name - * @script_addrs SDMA scripts addresses in SDMA ROM - */ -struct sdma_platform_data { - char *fw_name; - struct sdma_script_start_addrs *script_addrs; -}; - -#endif /* __MACH_MXC_SDMA_H__ */ diff --git a/include/linux/platform_data/dma-imx.h b/include/linux/platform_data/dma-imx.h deleted file mode 100644 index 7d964e787299..000000000000 --- a/include/linux/platform_data/dma-imx.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_DMA_H__ -#define __ASM_ARCH_MXC_DMA_H__ - -#include <linux/scatterlist.h> -#include <linux/device.h> -#include <linux/dmaengine.h> - -/* - * This enumerates peripheral types. Used for SDMA. - */ -enum sdma_peripheral_type { - IMX_DMATYPE_SSI, /* MCU domain SSI */ - IMX_DMATYPE_SSI_SP, /* Shared SSI */ - IMX_DMATYPE_MMC, /* MMC */ - IMX_DMATYPE_SDHC, /* SDHC */ - IMX_DMATYPE_UART, /* MCU domain UART */ - IMX_DMATYPE_UART_SP, /* Shared UART */ - IMX_DMATYPE_FIRI, /* FIRI */ - IMX_DMATYPE_CSPI, /* MCU domain CSPI */ - IMX_DMATYPE_CSPI_SP, /* Shared CSPI */ - IMX_DMATYPE_SIM, /* SIM */ - IMX_DMATYPE_ATA, /* ATA */ - IMX_DMATYPE_CCM, /* CCM */ - IMX_DMATYPE_EXT, /* External peripheral */ - IMX_DMATYPE_MSHC, /* Memory Stick Host Controller */ - IMX_DMATYPE_MSHC_SP, /* Shared Memory Stick Host Controller */ - IMX_DMATYPE_DSP, /* DSP */ - IMX_DMATYPE_MEMORY, /* Memory */ - IMX_DMATYPE_FIFO_MEMORY,/* FIFO type Memory */ - IMX_DMATYPE_SPDIF, /* SPDIF */ - IMX_DMATYPE_IPU_MEMORY, /* IPU Memory */ - IMX_DMATYPE_ASRC, /* ASRC */ - IMX_DMATYPE_ESAI, /* ESAI */ - IMX_DMATYPE_SSI_DUAL, /* SSI Dual FIFO */ - IMX_DMATYPE_ASRC_SP, /* Shared ASRC */ - IMX_DMATYPE_SAI, /* SAI */ -}; - -enum imx_dma_prio { - DMA_PRIO_HIGH = 0, - DMA_PRIO_MEDIUM = 1, - DMA_PRIO_LOW = 2 -}; - -struct imx_dma_data { - int dma_request; /* DMA request line */ - int dma_request2; /* secondary DMA request line */ - enum sdma_peripheral_type peripheral_type; - int priority; -}; - -static inline int imx_dma_is_ipu(struct dma_chan *chan) -{ - return !strcmp(dev_name(chan->device->dev), "ipu-core"); -} - -static inline int imx_dma_is_general_purpose(struct dma_chan *chan) -{ - return !strcmp(chan->device->dev->driver->name, "imx-sdma") || - !strcmp(chan->device->dev->driver->name, "imx-dma"); -} - -#endif diff --git a/include/linux/platform_data/dma-iop32x.h b/include/linux/platform_data/dma-iop32x.h new file mode 100644 index 000000000000..ac83cff89549 --- /dev/null +++ b/include/linux/platform_data/dma-iop32x.h @@ -0,0 +1,110 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright © 2006, Intel Corporation. + */ +#ifndef IOP_ADMA_H +#define IOP_ADMA_H +#include <linux/types.h> +#include <linux/dmaengine.h> +#include <linux/interrupt.h> + +#define IOP_ADMA_SLOT_SIZE 32 +#define IOP_ADMA_THRESHOLD 4 +#ifdef DEBUG +#define IOP_PARANOIA 1 +#else +#define IOP_PARANOIA 0 +#endif +#define iop_paranoia(x) BUG_ON(IOP_PARANOIA && (x)) + +#define DMA0_ID 0 +#define DMA1_ID 1 +#define AAU_ID 2 + +/** + * struct iop_adma_device - internal representation of an ADMA device + * @pdev: Platform device + * @id: HW ADMA Device selector + * @dma_desc_pool: base of DMA descriptor region (DMA address) + * @dma_desc_pool_virt: base of DMA descriptor region (CPU address) + * @common: embedded struct dma_device + */ +struct iop_adma_device { + struct platform_device *pdev; + int id; + dma_addr_t dma_desc_pool; + void *dma_desc_pool_virt; + struct dma_device common; +}; + +/** + * struct iop_adma_chan - internal representation of an ADMA device + * @pending: allows batching of hardware operations + * @lock: serializes enqueue/dequeue operations to the slot pool + * @mmr_base: memory mapped register base + * @chain: device chain view of the descriptors + * @device: parent device + * @common: common dmaengine channel object members + * @last_used: place holder for allocation to continue from where it left off + * @all_slots: complete domain of slots usable by the channel + * @slots_allocated: records the actual size of the descriptor slot pool + * @irq_tasklet: bottom half where iop_adma_slot_cleanup runs + */ +struct iop_adma_chan { + int pending; + spinlock_t lock; /* protects the descriptor slot pool */ + void __iomem *mmr_base; + struct list_head chain; + struct iop_adma_device *device; + struct dma_chan common; + struct iop_adma_desc_slot *last_used; + struct list_head all_slots; + int slots_allocated; + struct tasklet_struct irq_tasklet; +}; + +/** + * struct iop_adma_desc_slot - IOP-ADMA software descriptor + * @slot_node: node on the iop_adma_chan.all_slots list + * @chain_node: node on the op_adma_chan.chain list + * @hw_desc: virtual address of the hardware descriptor chain + * @phys: hardware address of the hardware descriptor chain + * @group_head: first operation in a transaction + * @slot_cnt: total slots used in an transaction (group of operations) + * @slots_per_op: number of slots per operation + * @idx: pool index + * @tx_list: list of descriptors that are associated with one operation + * @async_tx: support for the async_tx api + * @group_list: list of slots that make up a multi-descriptor transaction + * for example transfer lengths larger than the supported hw max + * @xor_check_result: result of zero sum + * @crc32_result: result crc calculation + */ +struct iop_adma_desc_slot { + struct list_head slot_node; + struct list_head chain_node; + void *hw_desc; + struct iop_adma_desc_slot *group_head; + u16 slot_cnt; + u16 slots_per_op; + u16 idx; + struct list_head tx_list; + struct dma_async_tx_descriptor async_tx; + union { + u32 *xor_check_result; + u32 *crc32_result; + u32 *pq_check_result; + }; +}; + +struct iop_adma_platform_data { + int hw_id; + dma_cap_mask_t cap_mask; + size_t pool_size; +}; + +#define to_iop_sw_desc(addr_hw_desc) \ + container_of(addr_hw_desc, struct iop_adma_desc_slot, hw_desc) +#define iop_hw_desc_slot_idx(hw_desc, idx) \ + ( (void *) (((unsigned long) hw_desc) + ((idx) << 5)) ) +#endif diff --git a/include/linux/platform_data/dma-mmp_tdma.h b/include/linux/platform_data/dma-mmp_tdma.h deleted file mode 100644 index 422d4504dbac..000000000000 --- a/include/linux/platform_data/dma-mmp_tdma.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * SRAM Memory Management - * - * Copyright (c) 2011 Marvell Semiconductors Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#ifndef __DMA_MMP_TDMA_H -#define __DMA_MMP_TDMA_H - -#include <linux/genalloc.h> - -/* ARBITRARY: SRAM allocations are multiples of this 2^N size */ -#define SRAM_GRANULARITY 512 - -enum sram_type { - MMP_SRAM_UNDEFINED = 0, - MMP_ASRAM, - MMP_ISRAM, -}; - -struct sram_platdata { - char *pool_name; - int granularity; -}; - -#ifdef CONFIG_MMP_SRAM -extern struct gen_pool *sram_get_gpool(char *pool_name); -#else -static inline struct gen_pool *sram_get_gpool(char *pool_name) -{ - return NULL; -} -#endif - -#endif /* __DMA_MMP_TDMA_H */ diff --git a/include/linux/platform_data/dma-s3c24xx.h b/include/linux/platform_data/dma-s3c24xx.h deleted file mode 100644 index 4f9aba405e96..000000000000 --- a/include/linux/platform_data/dma-s3c24xx.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * S3C24XX DMA handling - * - * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 of the License, or (at your option) - * any later version. - */ - -/* Helper to encode the source selection constraints for early s3c socs. */ -#define S3C24XX_DMA_CHANREQ(src, chan) ((BIT(3) | src) << chan * 4) - -enum s3c24xx_dma_bus { - S3C24XX_DMA_APB, - S3C24XX_DMA_AHB, -}; - -/** - * @bus: on which bus does the peripheral reside - AHB or APB. - * @handshake: is a handshake with the peripheral necessary - * @chansel: channel selection information, depending on variant; reqsel for - * s3c2443 and later and channel-selection map for earlier SoCs - * see CHANSEL doc in s3c2443-dma.c - */ -struct s3c24xx_dma_channel { - enum s3c24xx_dma_bus bus; - bool handshake; - u16 chansel; -}; - -struct dma_slave_map; - -/** - * struct s3c24xx_dma_platdata - platform specific settings - * @num_phy_channels: number of physical channels - * @channels: array of virtual channel descriptions - * @num_channels: number of virtual channels - * @slave_map: dma slave map matching table - * @slavecnt: number of elements in slave_map - */ -struct s3c24xx_dma_platdata { - int num_phy_channels; - struct s3c24xx_dma_channel *channels; - int num_channels; - const struct dma_slave_map *slave_map; - int slavecnt; -}; - -struct dma_chan; -bool s3c24xx_dma_filter(struct dma_chan *chan, void *param); diff --git a/include/linux/platform_data/dma-ste-dma40.h b/include/linux/platform_data/dma-ste-dma40.h deleted file mode 100644 index 1bb9b1852256..000000000000 --- a/include/linux/platform_data/dma-ste-dma40.h +++ /dev/null @@ -1,209 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2007-2010 - * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson - * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - */ - - -#ifndef STE_DMA40_H -#define STE_DMA40_H - -#include <linux/dmaengine.h> -#include <linux/scatterlist.h> -#include <linux/workqueue.h> -#include <linux/interrupt.h> - -/* - * Maxium size for a single dma descriptor - * Size is limited to 16 bits. - * Size is in the units of addr-widths (1,2,4,8 bytes) - * Larger transfers will be split up to multiple linked desc - */ -#define STEDMA40_MAX_SEG_SIZE 0xFFFF - -/* dev types for memcpy */ -#define STEDMA40_DEV_DST_MEMORY (-1) -#define STEDMA40_DEV_SRC_MEMORY (-1) - -enum stedma40_mode { - STEDMA40_MODE_LOGICAL = 0, - STEDMA40_MODE_PHYSICAL, - STEDMA40_MODE_OPERATION, -}; - -enum stedma40_mode_opt { - STEDMA40_PCHAN_BASIC_MODE = 0, - STEDMA40_LCHAN_SRC_LOG_DST_LOG = 0, - STEDMA40_PCHAN_MODULO_MODE, - STEDMA40_PCHAN_DOUBLE_DST_MODE, - STEDMA40_LCHAN_SRC_PHY_DST_LOG, - STEDMA40_LCHAN_SRC_LOG_DST_PHY, -}; - -#define STEDMA40_ESIZE_8_BIT 0x0 -#define STEDMA40_ESIZE_16_BIT 0x1 -#define STEDMA40_ESIZE_32_BIT 0x2 -#define STEDMA40_ESIZE_64_BIT 0x3 - -/* The value 4 indicates that PEN-reg shall be set to 0 */ -#define STEDMA40_PSIZE_PHY_1 0x4 -#define STEDMA40_PSIZE_PHY_2 0x0 -#define STEDMA40_PSIZE_PHY_4 0x1 -#define STEDMA40_PSIZE_PHY_8 0x2 -#define STEDMA40_PSIZE_PHY_16 0x3 - -/* - * The number of elements differ in logical and - * physical mode - */ -#define STEDMA40_PSIZE_LOG_1 STEDMA40_PSIZE_PHY_2 -#define STEDMA40_PSIZE_LOG_4 STEDMA40_PSIZE_PHY_4 -#define STEDMA40_PSIZE_LOG_8 STEDMA40_PSIZE_PHY_8 -#define STEDMA40_PSIZE_LOG_16 STEDMA40_PSIZE_PHY_16 - -/* Maximum number of possible physical channels */ -#define STEDMA40_MAX_PHYS 32 - -enum stedma40_flow_ctrl { - STEDMA40_NO_FLOW_CTRL, - STEDMA40_FLOW_CTRL, -}; - -/** - * struct stedma40_half_channel_info - dst/src channel configuration - * - * @big_endian: true if the src/dst should be read as big endian - * @data_width: Data width of the src/dst hardware - * @p_size: Burst size - * @flow_ctrl: Flow control on/off. - */ -struct stedma40_half_channel_info { - bool big_endian; - enum dma_slave_buswidth data_width; - int psize; - enum stedma40_flow_ctrl flow_ctrl; -}; - -/** - * struct stedma40_chan_cfg - Structure to be filled by client drivers. - * - * @dir: MEM 2 MEM, PERIPH 2 MEM , MEM 2 PERIPH, PERIPH 2 PERIPH - * @high_priority: true if high-priority - * @realtime: true if realtime mode is to be enabled. Only available on DMA40 - * version 3+, i.e DB8500v2+ - * @mode: channel mode: physical, logical, or operation - * @mode_opt: options for the chosen channel mode - * @dev_type: src/dst device type (driver uses dir to figure out which) - * @src_info: Parameters for dst half channel - * @dst_info: Parameters for dst half channel - * @use_fixed_channel: if true, use physical channel specified by phy_channel - * @phy_channel: physical channel to use, only if use_fixed_channel is true - * - * This structure has to be filled by the client drivers. - * It is recommended to do all dma configurations for clients in the machine. - * - */ -struct stedma40_chan_cfg { - enum dma_transfer_direction dir; - bool high_priority; - bool realtime; - enum stedma40_mode mode; - enum stedma40_mode_opt mode_opt; - int dev_type; - struct stedma40_half_channel_info src_info; - struct stedma40_half_channel_info dst_info; - - bool use_fixed_channel; - int phy_channel; -}; - -/** - * struct stedma40_platform_data - Configuration struct for the dma device. - * - * @dev_tx: mapping between destination event line and io address - * @dev_rx: mapping between source event line and io address - * @disabled_channels: A vector, ending with -1, that marks physical channels - * that are for different reasons not available for the driver. - * @soft_lli_chans: A vector, that marks physical channels will use LLI by SW - * which avoids HW bug that exists in some versions of the controller. - * SoftLLI introduces relink overhead that could impact performace for - * certain use cases. - * @num_of_soft_lli_chans: The number of channels that needs to be configured - * to use SoftLLI. - * @use_esram_lcla: flag for mapping the lcla into esram region - * @num_of_memcpy_chans: The number of channels reserved for memcpy. - * @num_of_phy_chans: The number of physical channels implemented in HW. - * 0 means reading the number of channels from DMA HW but this is only valid - * for 'multiple of 4' channels, like 8. - */ -struct stedma40_platform_data { - int disabled_channels[STEDMA40_MAX_PHYS]; - int *soft_lli_chans; - int num_of_soft_lli_chans; - bool use_esram_lcla; - int num_of_memcpy_chans; - int num_of_phy_chans; -}; - -#ifdef CONFIG_STE_DMA40 - -/** - * stedma40_filter() - Provides stedma40_chan_cfg to the - * ste_dma40 dma driver via the dmaengine framework. - * does some checking of what's provided. - * - * Never directly called by client. It used by dmaengine. - * @chan: dmaengine handle. - * @data: Must be of type: struct stedma40_chan_cfg and is - * the configuration of the framework. - * - * - */ - -bool stedma40_filter(struct dma_chan *chan, void *data); - -/** - * stedma40_slave_mem() - Transfers a raw data buffer to or from a slave - * (=device) - * - * @chan: dmaengine handle - * @addr: source or destination physicall address. - * @size: bytes to transfer - * @direction: direction of transfer - * @flags: is actually enum dma_ctrl_flags. See dmaengine.h - */ - -static inline struct -dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan, - dma_addr_t addr, - unsigned int size, - enum dma_transfer_direction direction, - unsigned long flags) -{ - struct scatterlist sg; - sg_init_table(&sg, 1); - sg.dma_address = addr; - sg.length = size; - - return dmaengine_prep_slave_sg(chan, &sg, 1, direction, flags); -} - -#else -static inline bool stedma40_filter(struct dma_chan *chan, void *data) -{ - return false; -} - -static inline struct -dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan, - dma_addr_t addr, - unsigned int size, - enum dma_transfer_direction direction, - unsigned long flags) -{ - return NULL; -} -#endif - -#endif diff --git a/include/linux/platform_data/dmtimer-omap.h b/include/linux/platform_data/dmtimer-omap.h index 757a0f9e26f9..726d89143842 100644 --- a/include/linux/platform_data/dmtimer-omap.h +++ b/include/linux/platform_data/dmtimer-omap.h @@ -1,20 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * DMTIMER platform data for TI OMAP platforms * * Copyright (C) 2012 Texas Instruments * Author: Jon Hunter <jon-hunter@ti.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. */ #ifndef __PLATFORM_DATA_DMTIMER_OMAP_H__ @@ -41,15 +30,19 @@ struct omap_dm_timer_ops { int (*stop)(struct omap_dm_timer *timer); int (*set_source)(struct omap_dm_timer *timer, int source); - int (*set_load)(struct omap_dm_timer *timer, int autoreload, - unsigned int value); + int (*set_load)(struct omap_dm_timer *timer, unsigned int value); int (*set_match)(struct omap_dm_timer *timer, int enable, unsigned int match); int (*set_pwm)(struct omap_dm_timer *timer, int def_on, - int toggle, int trigger); + int toggle, int trigger, int autoreload); + int (*get_pwm_status)(struct omap_dm_timer *timer); + int (*set_cap)(struct omap_dm_timer *timer, + int autoreload, bool config_period); + int (*get_cap_status)(struct omap_dm_timer *timer); int (*set_prescaler)(struct omap_dm_timer *timer, int prescaler); unsigned int (*read_counter)(struct omap_dm_timer *timer); + unsigned int (*read_cap)(struct omap_dm_timer *timer, bool is_period); int (*write_counter)(struct omap_dm_timer *timer, unsigned int value); unsigned int (*read_status)(struct omap_dm_timer *timer); diff --git a/include/linux/platform_data/ds620.h b/include/linux/platform_data/ds620.h index 6ef58bb77e46..f0ce22a78bb8 100644 --- a/include/linux/platform_data/ds620.h +++ b/include/linux/platform_data/ds620.h @@ -14,7 +14,7 @@ struct ds620_platform_data { * 1 = PO_LOW * 2 = PO_HIGH * - * (see Documentation/hwmon/ds620) + * (see Documentation/hwmon/ds620.rst) */ int pomode; }; diff --git a/include/linux/platform_data/dwc3-omap.h b/include/linux/platform_data/dwc3-omap.h deleted file mode 100644 index 1d36ca874cc8..000000000000 --- a/include/linux/platform_data/dwc3-omap.h +++ /dev/null @@ -1,43 +0,0 @@ -/** - * dwc3-omap.h - OMAP Specific Glue layer, header. - * - * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com - * All rights reserved. - * - * Author: Felipe Balbi <balbi@ti.com> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The names of the above-listed copyright holders may not be used - * to endorse or promote products derived from this software without - * specific prior written permission. - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2, as published by the Free - * Software Foundation. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -enum dwc3_omap_utmi_mode { - DWC3_OMAP_UTMI_MODE_UNKNOWN = 0, - DWC3_OMAP_UTMI_MODE_HW, - DWC3_OMAP_UTMI_MODE_SW, -}; diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h index 0a533f94438f..ee13d5ca630d 100644 --- a/include/linux/platform_data/edma.h +++ b/include/linux/platform_data/edma.h @@ -1,12 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * TI EDMA definitions * * Copyright (C) 2006-2013 Texas Instruments. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. */ /* diff --git a/include/linux/platform_data/efm32-spi.h b/include/linux/platform_data/efm32-spi.h deleted file mode 100644 index a2c56fcd0534..000000000000 --- a/include/linux/platform_data/efm32-spi.h +++ /dev/null @@ -1,15 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __LINUX_PLATFORM_DATA_EFM32_SPI_H__ -#define __LINUX_PLATFORM_DATA_EFM32_SPI_H__ - -#include <linux/types.h> - -/** - * struct efm32_spi_pdata - * @location: pinmux location for the I/O pins (to be written to the ROUTE - * register) - */ -struct efm32_spi_pdata { - u8 location; -}; -#endif /* ifndef __LINUX_PLATFORM_DATA_EFM32_SPI_H__ */ diff --git a/include/linux/platform_data/efm32-uart.h b/include/linux/platform_data/efm32-uart.h deleted file mode 100644 index ccbb8f11db75..000000000000 --- a/include/linux/platform_data/efm32-uart.h +++ /dev/null @@ -1,19 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * - * - */ -#ifndef __LINUX_PLATFORM_DATA_EFM32_UART_H__ -#define __LINUX_PLATFORM_DATA_EFM32_UART_H__ - -#include <linux/types.h> - -/** - * struct efm32_uart_pdata - * @location: pinmux location for the I/O pins (to be written to the ROUTE - * register) - */ -struct efm32_uart_pdata { - u8 location; -}; -#endif /* ifndef __LINUX_PLATFORM_DATA_EFM32_UART_H__ */ diff --git a/include/linux/platform_data/ehci-sh.h b/include/linux/platform_data/ehci-sh.h deleted file mode 100644 index 219bd79dabfc..000000000000 --- a/include/linux/platform_data/ehci-sh.h +++ /dev/null @@ -1,16 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 - * - * EHCI SuperH driver platform data - * - * Copyright (C) 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> - * Copyright (C) 2012 Renesas Solutions Corp. - */ - -#ifndef __USB_EHCI_SH_H -#define __USB_EHCI_SH_H - -struct ehci_sh_platdata { - void (*phy_init)(void); /* Phy init function */ -}; - -#endif /* __USB_EHCI_SH_H */ diff --git a/include/linux/platform_data/elm.h b/include/linux/platform_data/elm.h index b8686c00f15f..3cc78f0447b1 100644 --- a/include/linux/platform_data/elm.h +++ b/include/linux/platform_data/elm.h @@ -1,18 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * BCH Error Location Module * - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */ #ifndef __ELM_H @@ -60,6 +50,6 @@ static inline int elm_config(struct device *dev, enum bch_ecc bch_type, { return -ENOSYS; } -#endif /* CONFIG_MTD_NAND_ECC_BCH */ +#endif /* CONFIG_MTD_NAND_OMAP_BCH */ #endif /* __ELM_H */ diff --git a/include/linux/platform_data/emc2305.h b/include/linux/platform_data/emc2305.h new file mode 100644 index 000000000000..76043a97f975 --- /dev/null +++ b/include/linux/platform_data/emc2305.h @@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef __LINUX_PLATFORM_DATA_EMC2305__ +#define __LINUX_PLATFORM_DATA_EMC2305__ + +#define EMC2305_PWM_MAX 5 + +/** + * struct emc2305_platform_data - EMC2305 driver platform data + * @max_state: maximum cooling state of the cooling device; + * @pwm_num: number of active channels; + * @pwm_output_mask: PWM output mask + * @pwm_polarity_mask: PWM polarity mask + * @pwm_separate: separate PWM settings for every channel; + * @pwm_min: array of minimum PWM per channel; + * @pwm_freq: array of PWM frequency per channel + */ +struct emc2305_platform_data { + u8 max_state; + u8 pwm_num; + u8 pwm_output_mask; + u8 pwm_polarity_mask; + bool pwm_separate; + u8 pwm_min[EMC2305_PWM_MAX]; + u16 pwm_freq[EMC2305_PWM_MAX]; +}; + +#endif diff --git a/include/linux/platform_data/emif_plat.h b/include/linux/platform_data/emif_plat.h index 5c19a2a647c4..b93feef5d586 100644 --- a/include/linux/platform_data/emif_plat.h +++ b/include/linux/platform_data/emif_plat.h @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Definitions for TI EMIF device platform data * * Copyright (C) 2012 Texas Instruments, Inc. * * Aneesh V <aneesh@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __EMIF_PLAT_H #define __EMIF_PLAT_H diff --git a/include/linux/platform_data/eth-netx.h b/include/linux/platform_data/eth-netx.h deleted file mode 100644 index a395159725d5..000000000000 --- a/include/linux/platform_data/eth-netx.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ETH_NETX_H -#define __ETH_NETX_H - -struct netxeth_platform_data { - unsigned int xcno; /* number of xmac/xpec engine this eth uses */ -}; - -#endif diff --git a/include/linux/platform_data/fsa9480.h b/include/linux/platform_data/fsa9480.h deleted file mode 100644 index 72dddcb4bed1..000000000000 --- a/include/linux/platform_data/fsa9480.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (C) 2010 Samsung Electronics - * Minkyu Kang <mk7.kang@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef _FSA9480_H_ -#define _FSA9480_H_ - -#define FSA9480_ATTACHED 1 -#define FSA9480_DETACHED 0 - -struct fsa9480_platform_data { - void (*cfg_gpio) (void); - void (*usb_cb) (u8 attached); - void (*uart_cb) (u8 attached); - void (*charger_cb) (u8 attached); - void (*jig_cb) (u8 attached); - void (*reset_cb) (void); - void (*usb_power) (u8 on); - int wakeup; -}; - -#endif /* _FSA9480_H_ */ diff --git a/include/linux/platform_data/g762.h b/include/linux/platform_data/g762.h index d3c51283764d..249257ee2132 100644 --- a/include/linux/platform_data/g762.h +++ b/include/linux/platform_data/g762.h @@ -1,21 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Platform data structure for g762 fan controller driver * * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __LINUX_PLATFORM_DATA_G762_H__ #define __LINUX_PLATFORM_DATA_G762_H__ diff --git a/include/linux/platform_data/gpio-ath79.h b/include/linux/platform_data/gpio-ath79.h deleted file mode 100644 index 88b0db7bee74..000000000000 --- a/include/linux/platform_data/gpio-ath79.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Atheros AR7XXX/AR9XXX GPIO controller platform data - * - * Copyright (C) 2015 Alban Bedel <albeu@free.fr> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __LINUX_PLATFORM_DATA_GPIO_ATH79_H -#define __LINUX_PLATFORM_DATA_GPIO_ATH79_H - -struct ath79_gpio_platform_data { - unsigned ngpios; - bool oe_inverted; -}; - -#endif diff --git a/include/linux/platform_data/gpio-davinci.h b/include/linux/platform_data/gpio-davinci.h deleted file mode 100644 index a93841bfb9f7..000000000000 --- a/include/linux/platform_data/gpio-davinci.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * DaVinci GPIO Platform Related Defines - * - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __DAVINCI_GPIO_PLATFORM_H -#define __DAVINCI_GPIO_PLATFORM_H - -struct davinci_gpio_platform_data { - bool no_auto_base; - u32 base; - u32 ngpio; - u32 gpio_unbanked; -}; - -/* Convert GPIO signal to GPIO pin number */ -#define GPIO_TO_PIN(bank, gpio) (16 * (bank) + (gpio)) - -#endif diff --git a/include/linux/platform_data/gpio-dwapb.h b/include/linux/platform_data/gpio-dwapb.h deleted file mode 100644 index 419cfacb4b42..000000000000 --- a/include/linux/platform_data/gpio-dwapb.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Copyright(c) 2014 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - */ - -#ifndef GPIO_DW_APB_H -#define GPIO_DW_APB_H - -struct dwapb_port_property { - struct fwnode_handle *fwnode; - unsigned int idx; - unsigned int ngpio; - unsigned int gpio_base; - int irq[32]; - bool has_irq; - bool irq_shared; -}; - -struct dwapb_platform_data { - struct dwapb_port_property *properties; - unsigned int nports; -}; - -#endif diff --git a/include/linux/platform_data/gpio-htc-egpio.h b/include/linux/platform_data/gpio-htc-egpio.h index 9a3e78082883..eaefba0b6465 100644 --- a/include/linux/platform_data/gpio-htc-egpio.h +++ b/include/linux/platform_data/gpio-htc-egpio.h @@ -50,7 +50,4 @@ struct htc_egpio_platform_data { int num_chips; }; -/* Determine the wakeup irq, to be called during early resume */ -extern int htc_egpio_get_wakeup_irq(struct device *dev); - #endif diff --git a/include/linux/platform_data/gpio-omap.h b/include/linux/platform_data/gpio-omap.h index 6d07eebb3f75..cdd8cfb424f5 100644 --- a/include/linux/platform_data/gpio-omap.h +++ b/include/linux/platform_data/gpio-omap.h @@ -1,24 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * OMAP GPIO handling defines and functions * * Copyright (C) 2003-2005 Nokia Corporation * * Written by Juha Yrjölä <juha.yrjola@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ #ifndef __ASM_ARCH_OMAP_GPIO_H @@ -99,6 +85,7 @@ * omap2+ specific GPIO registers */ #define OMAP24XX_GPIO_REVISION 0x0000 +#define OMAP24XX_GPIO_SYSCONFIG 0x0010 #define OMAP24XX_GPIO_IRQSTATUS1 0x0018 #define OMAP24XX_GPIO_IRQSTATUS2 0x0028 #define OMAP24XX_GPIO_IRQENABLE2 0x002c @@ -122,6 +109,7 @@ #define OMAP24XX_GPIO_SETDATAOUT 0x0094 #define OMAP4_GPIO_REVISION 0x0000 +#define OMAP4_GPIO_SYSCONFIG 0x0010 #define OMAP4_GPIO_EOI 0x0020 #define OMAP4_GPIO_IRQSTATUSRAW0 0x0024 #define OMAP4_GPIO_IRQSTATUSRAW1 0x0028 @@ -156,12 +144,10 @@ #define OMAP_MAX_GPIO_LINES 192 -#define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr)) -#define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES) - #ifndef __ASSEMBLER__ struct omap_gpio_reg_offs { u16 revision; + u16 sysconfig; u16 direction; u16 datain; u16 dataout; @@ -200,9 +186,7 @@ struct omap_gpio_platform_data { bool is_mpuio; /* whether the bank is of type MPUIO */ u32 non_wakeup_gpios; - u32 quirks; /* Version specific quirks mask */ - - struct omap_gpio_reg_offs *regs; + const struct omap_gpio_reg_offs *regs; /* Return context loss count due to PM states changing */ int (*get_context_loss_count)(struct device *dev); diff --git a/include/linux/platform_data/gpio/gpio-amd-fch.h b/include/linux/platform_data/gpio/gpio-amd-fch.h new file mode 100644 index 000000000000..255d51c9d36d --- /dev/null +++ b/include/linux/platform_data/gpio/gpio-amd-fch.h @@ -0,0 +1,46 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +/* + * AMD FCH gpio driver platform-data + * + * Copyright (C) 2018 metux IT consult + * Author: Enrico Weigelt <info@metux.net> + * + */ + +#ifndef __LINUX_PLATFORM_DATA_GPIO_AMD_FCH_H +#define __LINUX_PLATFORM_DATA_GPIO_AMD_FCH_H + +#define AMD_FCH_GPIO_DRIVER_NAME "gpio_amd_fch" + +/* + * gpio register index definitions + */ +#define AMD_FCH_GPIO_REG_GPIO49 0x40 +#define AMD_FCH_GPIO_REG_GPIO50 0x41 +#define AMD_FCH_GPIO_REG_GPIO51 0x42 +#define AMD_FCH_GPIO_REG_GPIO55_DEVSLP0 0x43 +#define AMD_FCH_GPIO_REG_GPIO57 0x44 +#define AMD_FCH_GPIO_REG_GPIO58 0x45 +#define AMD_FCH_GPIO_REG_GPIO59_DEVSLP1 0x46 +#define AMD_FCH_GPIO_REG_GPIO64 0x47 +#define AMD_FCH_GPIO_REG_GPIO68 0x48 +#define AMD_FCH_GPIO_REG_GPIO66_SPKR 0x5B +#define AMD_FCH_GPIO_REG_GPIO71 0x4D +#define AMD_FCH_GPIO_REG_GPIO32_GE1 0x59 +#define AMD_FCH_GPIO_REG_GPIO33_GE2 0x5A +#define AMT_FCH_GPIO_REG_GEVT22 0x09 + +/* + * struct amd_fch_gpio_pdata - GPIO chip platform data + * @gpio_num: number of entries + * @gpio_reg: array of gpio registers + * @gpio_names: array of gpio names + */ +struct amd_fch_gpio_pdata { + int gpio_num; + int *gpio_reg; + const char * const *gpio_names; +}; + +#endif /* __LINUX_PLATFORM_DATA_GPIO_AMD_FCH_H */ diff --git a/include/linux/platform_data/gpio_backlight.h b/include/linux/platform_data/gpio_backlight.h index 683d90453c41..323fbf5f7613 100644 --- a/include/linux/platform_data/gpio_backlight.h +++ b/include/linux/platform_data/gpio_backlight.h @@ -1,9 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * gpio_backlight.h - Simple GPIO-controlled backlight - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __GPIO_BACKLIGHT_H__ #define __GPIO_BACKLIGHT_H__ @@ -11,10 +8,7 @@ struct device; struct gpio_backlight_platform_data { - struct device *fbdev; - int gpio; - int def_value; - const char *name; + struct device *dev; }; #endif diff --git a/include/linux/platform_data/gpmc-omap.h b/include/linux/platform_data/gpmc-omap.h index 67ccdb0e1606..dcca6c5e23bb 100644 --- a/include/linux/platform_data/gpmc-omap.h +++ b/include/linux/platform_data/gpmc-omap.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP GPMC Platform data * - * Copyright (C) 2014 Texas Instruments, Inc. - http://www.ti.com + * Copyright (C) 2014 Texas Instruments, Inc. - https://www.ti.com * Roger Quadros <rogerq@ti.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. */ #ifndef _GPMC_OMAP_H_ @@ -139,6 +136,13 @@ struct gpmc_device_timings { #define GPMC_MUX_AAD 1 /* Addr-Addr-Data multiplex */ #define GPMC_MUX_AD 2 /* Addr-Data multiplex */ +/* Wait pin polarity values */ +#define GPMC_WAITPINPOLARITY_INVALID UINT_MAX +#define GPMC_WAITPINPOLARITY_ACTIVE_LOW 0 +#define GPMC_WAITPINPOLARITY_ACTIVE_HIGH 1 + +#define GPMC_WAITPIN_INVALID UINT_MAX + struct gpmc_settings { bool burst_wrap; /* enables wrap bursting */ bool burst_read; /* enables read page/burst mode */ @@ -152,6 +156,7 @@ struct gpmc_settings { u32 device_width; /* device bus width (8 or 16 bit) */ u32 mux_add_data; /* multiplex address & data */ u32 wait_pin; /* wait-pin to be used */ + u32 wait_pin_polarity; }; /* Data for each chip select */ diff --git a/include/linux/platform_data/gsc_hwmon.h b/include/linux/platform_data/gsc_hwmon.h new file mode 100644 index 000000000000..70e8a6bec0f6 --- /dev/null +++ b/include/linux/platform_data/gsc_hwmon.h @@ -0,0 +1,45 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _GSC_HWMON_H +#define _GSC_HWMON_H + +enum gsc_hwmon_mode { + mode_temperature, + mode_voltage_24bit, + mode_voltage_raw, + mode_voltage_16bit, + mode_fan, + mode_max, +}; + +/** + * struct gsc_hwmon_channel - configuration parameters + * @reg: I2C register offset + * @mode: channel mode + * @name: channel name + * @mvoffset: voltage offset + * @vdiv: voltage divider array (2 resistor values in milli-ohms) + */ +struct gsc_hwmon_channel { + unsigned int reg; + unsigned int mode; + const char *name; + unsigned int mvoffset; + unsigned int vdiv[2]; +}; + +/** + * struct gsc_hwmon_platform_data - platform data for gsc_hwmon driver + * @nchannels: number of elements in @channels array + * @vreference: voltage reference (mV) + * @resolution: ADC bit resolution + * @fan_base: register base for FAN controller + * @channels: array of gsc_hwmon_channel structures describing channels + */ +struct gsc_hwmon_platform_data { + int nchannels; + unsigned int resolution; + unsigned int vreference; + unsigned int fan_base; + struct gsc_hwmon_channel channels[] __counted_by(nchannels); +}; +#endif diff --git a/include/linux/platform_data/hirschmann-hellcreek.h b/include/linux/platform_data/hirschmann-hellcreek.h new file mode 100644 index 000000000000..8748680e9e3c --- /dev/null +++ b/include/linux/platform_data/hirschmann-hellcreek.h @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */ +/* + * Hirschmann Hellcreek TSN switch platform data. + * + * Copyright (C) 2020 Linutronix GmbH + * Author Kurt Kanzenbach <kurt@linutronix.de> + */ + +#ifndef _HIRSCHMANN_HELLCREEK_H_ +#define _HIRSCHMANN_HELLCREEK_H_ + +#include <linux/types.h> + +struct hellcreek_platform_data { + const char *name; /* Switch name */ + int num_ports; /* Amount of switch ports */ + int is_100_mbits; /* Is it configured to 100 or 1000 mbit/s */ + int qbv_support; /* Qbv support on front TSN ports */ + int qbv_on_cpu_port; /* Qbv support on the CPU port */ + int qbu_support; /* Qbu support on front TSN ports */ + u16 module_id; /* Module identificaton */ +}; + +#endif /* _HIRSCHMANN_HELLCREEK_H_ */ diff --git a/include/linux/platform_data/hsmmc-omap.h b/include/linux/platform_data/hsmmc-omap.h index 85da11916bd5..7124a5f4bf06 100644 --- a/include/linux/platform_data/hsmmc-omap.h +++ b/include/linux/platform_data/hsmmc-omap.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * MMC definitions for OMAP2 * * Copyright (C) 2006 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* @@ -70,9 +67,6 @@ struct omap_hsmmc_platform_data { /* string specifying a particular variant of hardware */ char *version; - /* if we have special card, init it using this callback */ - void (*init_card)(struct mmc_card *card); - const char *name; u32 ocr_mask; }; diff --git a/include/linux/platform_data/huawei-gaokun-ec.h b/include/linux/platform_data/huawei-gaokun-ec.h new file mode 100644 index 000000000000..faa15d315128 --- /dev/null +++ b/include/linux/platform_data/huawei-gaokun-ec.h @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Huawei Matebook E Go Embedded Controller + * + * Copyright (C) 2024-2025 Pengyu Luo <mitltlatltl@gmail.com> + */ + +#ifndef __HUAWEI_GAOKUN_EC_H__ +#define __HUAWEI_GAOKUN_EC_H__ + +#define GAOKUN_UCSI_CCI_SIZE 4 +#define GAOKUN_UCSI_MSGI_SIZE 16 +#define GAOKUN_UCSI_READ_SIZE (GAOKUN_UCSI_CCI_SIZE + GAOKUN_UCSI_MSGI_SIZE) +#define GAOKUN_UCSI_WRITE_SIZE 24 /* 8B CTRL, 16B MSGO */ + +#define GAOKUN_UCSI_NO_PORT_UPDATE (-1) + +#define GAOKUN_SMART_CHARGE_DATA_SIZE 4 /* mode, delay, start, end */ + +/* -------------------------------------------------------------------------- */ + +struct gaokun_ec; +struct gaokun_ucsi_reg; +struct notifier_block; + +#define GAOKUN_MOD_NAME "huawei_gaokun_ec" +#define GAOKUN_DEV_PSY "psy" +#define GAOKUN_DEV_UCSI "ucsi" + +/* -------------------------------------------------------------------------- */ +/* Common API */ + +int gaokun_ec_register_notify(struct gaokun_ec *ec, + struct notifier_block *nb); +void gaokun_ec_unregister_notify(struct gaokun_ec *ec, + struct notifier_block *nb); + +int gaokun_ec_read(struct gaokun_ec *ec, const u8 *req, + size_t resp_len, u8 *resp); +int gaokun_ec_write(struct gaokun_ec *ec, const u8 *req); +int gaokun_ec_read_byte(struct gaokun_ec *ec, const u8 *req, u8 *byte); + +/* -------------------------------------------------------------------------- */ +/* API for PSY */ + +int gaokun_ec_psy_multi_read(struct gaokun_ec *ec, u8 reg, + size_t resp_len, u8 *resp); + +static inline int gaokun_ec_psy_read_byte(struct gaokun_ec *ec, + u8 reg, u8 *byte) +{ + return gaokun_ec_psy_multi_read(ec, reg, sizeof(*byte), byte); +} + +static inline int gaokun_ec_psy_read_word(struct gaokun_ec *ec, + u8 reg, u16 *word) +{ + return gaokun_ec_psy_multi_read(ec, reg, sizeof(*word), (u8 *)word); +} + +int gaokun_ec_psy_get_smart_charge(struct gaokun_ec *ec, + u8 resp[GAOKUN_SMART_CHARGE_DATA_SIZE]); +int gaokun_ec_psy_set_smart_charge(struct gaokun_ec *ec, + const u8 req[GAOKUN_SMART_CHARGE_DATA_SIZE]); + +int gaokun_ec_psy_get_smart_charge_enable(struct gaokun_ec *ec, bool *on); +int gaokun_ec_psy_set_smart_charge_enable(struct gaokun_ec *ec, bool on); + +/* -------------------------------------------------------------------------- */ +/* API for UCSI */ + +int gaokun_ec_ucsi_read(struct gaokun_ec *ec, u8 resp[GAOKUN_UCSI_READ_SIZE]); +int gaokun_ec_ucsi_write(struct gaokun_ec *ec, + const u8 req[GAOKUN_UCSI_WRITE_SIZE]); + +int gaokun_ec_ucsi_get_reg(struct gaokun_ec *ec, struct gaokun_ucsi_reg *ureg); +int gaokun_ec_ucsi_pan_ack(struct gaokun_ec *ec, int port_id); + +#endif /* __HUAWEI_GAOKUN_EC_H__ */ diff --git a/include/linux/platform_data/hwmon-s3c.h b/include/linux/platform_data/hwmon-s3c.h index 0e3cce130fe2..7d21e0c41037 100644 --- a/include/linux/platform_data/hwmon-s3c.h +++ b/include/linux/platform_data/hwmon-s3c.h @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright 2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * http://armlinux.simtec.co.uk/ * * S3C - HWMon interface for ADC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __HWMON_S3C_H__ @@ -36,14 +33,4 @@ struct s3c_hwmon_pdata { struct s3c_hwmon_chcfg *in[8]; }; -/** - * s3c_hwmon_set_platdata - Set platform data for S3C HWMON device - * @pd: Platform data to register to device. - * - * Register the given platform data for use with the S3C HWMON device. - * The call will copy the platform data, so the board definitions can - * make the structure itself __initdata. - */ -extern void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd); - #endif /* __HWMON_S3C_H__ */ diff --git a/include/linux/platform_data/i2c-cbus-gpio.h b/include/linux/platform_data/i2c-cbus-gpio.h deleted file mode 100644 index 6faa992a9502..000000000000 --- a/include/linux/platform_data/i2c-cbus-gpio.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * i2c-cbus-gpio.h - CBUS I2C platform_data definition - * - * Copyright (C) 2004-2009 Nokia Corporation - * - * Written by Felipe Balbi and Aaro Koskinen. - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of this - * archive for more details. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __INCLUDE_LINUX_I2C_CBUS_GPIO_H -#define __INCLUDE_LINUX_I2C_CBUS_GPIO_H - -struct i2c_cbus_platform_data { - int dat_gpio; - int clk_gpio; - int sel_gpio; -}; - -#endif /* __INCLUDE_LINUX_I2C_CBUS_GPIO_H */ diff --git a/include/linux/platform_data/i2c-davinci.h b/include/linux/platform_data/i2c-davinci.h deleted file mode 100644 index 98967df07468..000000000000 --- a/include/linux/platform_data/i2c-davinci.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * DaVinci I2C controller platform_device info - * - * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com> - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. -*/ - -#ifndef __ASM_ARCH_I2C_H -#define __ASM_ARCH_I2C_H - -/* All frequencies are expressed in kHz */ -struct davinci_i2c_platform_data { - unsigned int bus_freq; /* standard bus frequency (kHz) */ - unsigned int bus_delay; /* post-transaction delay (usec) */ - bool gpio_recovery; /* Use GPIO recovery method */ - bool has_pfunc; /* Chip has a ICPFUNC register */ -}; - -/* for board setup code */ -void davinci_init_i2c(struct davinci_i2c_platform_data *); - -#endif /* __ASM_ARCH_I2C_H */ diff --git a/include/linux/platform_data/i2c-designware.h b/include/linux/platform_data/i2c-designware.h deleted file mode 100644 index 7a61fb27c25b..000000000000 --- a/include/linux/platform_data/i2c-designware.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Copyright(c) 2014 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - */ - -#ifndef I2C_DESIGNWARE_H -#define I2C_DESIGNWARE_H - -struct dw_i2c_platform_data { - unsigned int i2c_scl_freq; -}; - -#endif diff --git a/include/linux/platform_data/i2c-gpio.h b/include/linux/platform_data/i2c-gpio.h index 352c1426fd4d..545639bcca72 100644 --- a/include/linux/platform_data/i2c-gpio.h +++ b/include/linux/platform_data/i2c-gpio.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * i2c-gpio interface to platform code * * Copyright (C) 2007 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _LINUX_I2C_GPIO_H #define _LINUX_I2C_GPIO_H @@ -19,16 +16,25 @@ * isn't actively driven high when setting the output value high. * gpio_get_value() must return the actual pin state even if the * pin is configured as an output. + * @sda_is_output_only: SDA output drivers can't be turned off. + * This is for clients that can only read SDA/SCL. + * @sda_has_no_pullup: SDA is used in a non-compliant way and has no pull-up. + * Therefore disable open-drain. * @scl_is_open_drain: SCL is set up as open drain. Same requirements * as for sda_is_open_drain apply. * @scl_is_output_only: SCL output drivers cannot be turned off. + * @scl_has_no_pullup: SCL is used in a non-compliant way and has no pull-up. + * Therefore disable open-drain. */ struct i2c_gpio_platform_data { int udelay; int timeout; unsigned int sda_is_open_drain:1; + unsigned int sda_is_output_only:1; + unsigned int sda_has_no_pullup:1; unsigned int scl_is_open_drain:1; unsigned int scl_is_output_only:1; + unsigned int scl_has_no_pullup:1; }; #endif /* _LINUX_I2C_GPIO_H */ diff --git a/include/linux/platform_data/i2c-hid.h b/include/linux/platform_data/i2c-hid.h deleted file mode 100644 index c628bb5e1061..000000000000 --- a/include/linux/platform_data/i2c-hid.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * HID over I2C protocol implementation - * - * Copyright (c) 2012 Benjamin Tissoires <benjamin.tissoires@gmail.com> - * Copyright (c) 2012 Ecole Nationale de l'Aviation Civile, France - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - */ - -#ifndef __LINUX_I2C_HID_H -#define __LINUX_I2C_HID_H - -#include <linux/regulator/consumer.h> -#include <linux/types.h> - -/** - * struct i2chid_platform_data - used by hid over i2c implementation. - * @hid_descriptor_address: i2c register where the HID descriptor is stored. - * @supplies: regulators for powering on the device. - * @post_power_delay_ms: delay after powering on before device is usable. - * - * Note that it is the responsibility of the platform driver (or the acpi 5.0 - * driver, or the flattened device tree) to setup the irq related to the gpio in - * the struct i2c_board_info. - * The platform driver should also setup the gpio according to the device: - * - * A typical example is the following: - * irq = gpio_to_irq(intr_gpio); - * hkdk4412_i2c_devs5[0].irq = irq; // store the irq in i2c_board_info - * gpio_request(intr_gpio, "elan-irq"); - * s3c_gpio_setpull(intr_gpio, S3C_GPIO_PULL_UP); - */ -struct i2c_hid_platform_data { - u16 hid_descriptor_address; - struct regulator_bulk_data supplies[2]; - int post_power_delay_ms; -}; - -#endif /* __LINUX_I2C_HID_H */ diff --git a/include/linux/platform_data/i2c-imx.h b/include/linux/platform_data/i2c-imx.h index 8289d915e615..962bfc3273eb 100644 --- a/include/linux/platform_data/i2c-imx.h +++ b/include/linux/platform_data/i2c-imx.h @@ -1,9 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * i2c.h - i.MX I2C driver header file * * Copyright (c) 2008, Darius Augulis <augulis.darius@gmail.com> - * - * This file is released under the GPLv2 */ #ifndef __ASM_ARCH_I2C_H_ diff --git a/include/linux/platform_data/i2c-mux-gpio.h b/include/linux/platform_data/i2c-mux-gpio.h index 4406108201fe..96843aab4d1e 100644 --- a/include/linux/platform_data/i2c-mux-gpio.h +++ b/include/linux/platform_data/i2c-mux-gpio.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * i2c-mux-gpio interface to platform code * * Peter Korsgaard <peter.korsgaard@barco.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _LINUX_I2C_MUX_GPIO_H @@ -21,23 +18,16 @@ * @values: Array of bitmasks of GPIO settings (low/high) for each * position * @n_values: Number of multiplexer positions (busses to instantiate) - * @classes: Optional I2C auto-detection classes - * @gpio_chip: Optional GPIO chip name; if set, GPIO pin numbers are given - * relative to the base GPIO number of that chip - * @gpios: Array of GPIO numbers used to control MUX - * @n_gpios: Number of GPIOs used to control MUX * @idle: Bitmask to write to MUX when idle or GPIO_I2CMUX_NO_IDLE if not used + * @settle_time: Delay to wait when a new bus is selected */ struct i2c_mux_gpio_platform_data { int parent; int base_nr; const unsigned *values; int n_values; - const unsigned *classes; - char *gpio_chip; - const unsigned *gpios; - int n_gpios; unsigned idle; + u32 settle_time; }; #endif /* _LINUX_I2C_MUX_GPIO_H */ diff --git a/include/linux/platform_data/i2c-mux-reg.h b/include/linux/platform_data/i2c-mux-reg.h index c68712aadf43..e2e895768311 100644 --- a/include/linux/platform_data/i2c-mux-reg.h +++ b/include/linux/platform_data/i2c-mux-reg.h @@ -1,13 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * I2C multiplexer using a single register * * Copyright 2015 Freescale Semiconductor * York Sun <yorksun@freescale.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. */ #ifndef __LINUX_PLATFORM_DATA_I2C_MUX_REG_H @@ -21,7 +17,6 @@ * @n_values: Number of multiplexer channels * @little_endian: Indicating if the register is in little endian * @write_only: Reading the register is not allowed by hardware - * @classes: Optional I2C auto-detection classes * @idle: Value to write to mux when idle * @idle_in_use: indicate if idle value is in use * @reg: Virtual address of the register to switch channel @@ -34,7 +29,6 @@ struct i2c_mux_reg_platform_data { int n_values; bool little_endian; bool write_only; - const unsigned int *classes; u32 idle; bool idle_in_use; void __iomem *reg; diff --git a/include/linux/platform_data/i2c-ocores.h b/include/linux/platform_data/i2c-ocores.h index 113d6b12f650..e6326cbafe59 100644 --- a/include/linux/platform_data/i2c-ocores.h +++ b/include/linux/platform_data/i2c-ocores.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * i2c-ocores.h - definitions for the i2c-ocores interface * * Peter Korsgaard <peter@korsgaard.com> - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #ifndef _LINUX_I2C_OCORES_H @@ -15,6 +12,7 @@ struct ocores_i2c_platform_data { u32 reg_shift; /* register offset shift value */ u32 reg_io_width; /* register io read/write width */ u32 clock_khz; /* input clock in kHz */ + u32 bus_khz; /* bus clock in kHz */ bool big_endian; /* registers are big endian */ u8 num_devices; /* number of devices in the devices list */ struct i2c_board_info const *devices; /* devices connected to the bus */ diff --git a/include/linux/platform_data/i2c-pxa.h b/include/linux/platform_data/i2c-pxa.h index 5236f216dfae..24953981bd9f 100644 --- a/include/linux/platform_data/i2c-pxa.h +++ b/include/linux/platform_data/i2c-pxa.h @@ -1,69 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * i2c_pxa.h * * Copyright (C) 2002 Intrinsyc Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef _I2C_PXA_H_ #define _I2C_PXA_H_ -#if 0 -#define DEF_TIMEOUT 3 -#else -/* need a longer timeout if we're dealing with the fact we may well be - * looking at a multi-master environment -*/ -#define DEF_TIMEOUT 32 -#endif - -#define BUS_ERROR (-EREMOTEIO) -#define XFER_NAKED (-ECONNREFUSED) -#define I2C_RETRY (-2000) /* an error has occurred retry transmit */ - -/* ICR initialize bit values -* -* 15. FM 0 (100 Khz operation) -* 14. UR 0 (No unit reset) -* 13. SADIE 0 (Disables the unit from interrupting on slave addresses -* matching its slave address) -* 12. ALDIE 0 (Disables the unit from interrupt when it loses arbitration -* in master mode) -* 11. SSDIE 0 (Disables interrupts from a slave stop detected, in slave mode) -* 10. BEIE 1 (Enable interrupts from detected bus errors, no ACK sent) -* 9. IRFIE 1 (Enable interrupts from full buffer received) -* 8. ITEIE 1 (Enables the I2C unit to interrupt when transmit buffer empty) -* 7. GCD 1 (Disables i2c unit response to general call messages as a slave) -* 6. IUE 0 (Disable unit until we change settings) -* 5. SCLE 1 (Enables the i2c clock output for master mode (drives SCL) -* 4. MA 0 (Only send stop with the ICR stop bit) -* 3. TB 0 (We are not transmitting a byte initially) -* 2. ACKNAK 0 (Send an ACK after the unit receives a byte) -* 1. STOP 0 (Do not send a STOP) -* 0. START 0 (Do not send a START) -* -*/ -#define I2C_ICR_INIT (ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE) - -/* I2C status register init values - * - * 10. BED 1 (Clear bus error detected) - * 9. SAD 1 (Clear slave address detected) - * 7. IRF 1 (Clear IDBR Receive Full) - * 6. ITE 1 (Clear IDBR Transmit Empty) - * 5. ALD 1 (Clear Arbitration Loss Detected) - * 4. SSD 1 (Clear Slave Stop Detected) - */ -#define I2C_ISR_INIT 0x7FF /* status register init */ - -struct i2c_slave_client; - struct i2c_pxa_platform_data { - unsigned int slave_addr; - struct i2c_slave_client *slave; unsigned int class; unsigned int use_pio :1; unsigned int fast_mode :1; diff --git a/include/linux/platform_data/i2c-s3c2410.h b/include/linux/platform_data/i2c-s3c2410.h index 05af66b840b9..550746715139 100644 --- a/include/linux/platform_data/i2c-s3c2410.h +++ b/include/linux/platform_data/i2c-s3c2410.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright 2004-2009 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * S3C - I2C Controller platform_device info - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __I2C_S3C2410_H diff --git a/include/linux/platform_data/i2c-xiic.h b/include/linux/platform_data/i2c-xiic.h index 4f9f2256a97e..2e3683c2398d 100644 --- a/include/linux/platform_data/i2c-xiic.h +++ b/include/linux/platform_data/i2c-xiic.h @@ -1,19 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * i2c-xiic.h * Copyright (c) 2009 Intel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /* Supports: diff --git a/include/linux/platform_data/ina2xx.h b/include/linux/platform_data/ina2xx.h index 9f0aa1b48c78..2aa5ee9a9050 100644 --- a/include/linux/platform_data/ina2xx.h +++ b/include/linux/platform_data/ina2xx.h @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Driver for Texas Instruments INA219, INA226 power monitor chips * * Copyright (C) 2012 Lothar Felten <lothar.felten@gmail.com> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * For further information, see the Documentation/hwmon/ina2xx file. + * For further information, see the Documentation/hwmon/ina2xx.rst file. */ /** diff --git a/include/linux/platform_data/invensense_mpu6050.h b/include/linux/platform_data/invensense_mpu6050.h index 554b59801aa8..f05b37521f67 100644 --- a/include/linux/platform_data/invensense_mpu6050.h +++ b/include/linux/platform_data/invensense_mpu6050.h @@ -1,14 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2012 Invensense, Inc. -* -* This software is licensed under the terms of the GNU General Public -* License version 2, as published by the Free Software Foundation, and -* may be copied, distributed, and modified under those terms. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. */ #ifndef __INV_MPU6050_PLATFORM_H_ @@ -20,7 +12,7 @@ * mounting matrix retrieved from device-tree) * * Contains platform specific information on how to configure the MPU6050 to - * work on this platform. The orientation matricies are 3x3 rotation matricies + * work on this platform. The orientation matrices are 3x3 rotation matrices * that are applied to the data to rotate from the mounting orientation to the * platform orientation. The values must be one of 0, 1, or -1 and each row and * column should have exactly 1 non-zero value. diff --git a/include/linux/platform_data/iommu-omap.h b/include/linux/platform_data/iommu-omap.h index e8b12dbf6170..8474a0208b34 100644 --- a/include/linux/platform_data/iommu-omap.h +++ b/include/linux/platform_data/iommu-omap.h @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * omap iommu: main structures * * Copyright (C) 2008-2009 Nokia Corporation * * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/platform_device.h> @@ -16,4 +13,8 @@ struct iommu_platform_data { const char *reset_name; int (*assert_reset)(struct platform_device *pdev, const char *name); int (*deassert_reset)(struct platform_device *pdev, const char *name); + int (*device_enable)(struct platform_device *pdev); + int (*device_idle)(struct platform_device *pdev); + int (*set_pwrdm_constraint)(struct platform_device *pdev, bool request, + u8 *pwrst); }; diff --git a/include/linux/platform_data/irda-pxaficp.h b/include/linux/platform_data/irda-pxaficp.h deleted file mode 100644 index bd35ddcf3068..000000000000 --- a/include/linux/platform_data/irda-pxaficp.h +++ /dev/null @@ -1,26 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef ASMARM_ARCH_IRDA_H -#define ASMARM_ARCH_IRDA_H - -/* board specific transceiver capabilities */ - -#define IR_OFF 1 -#define IR_SIRMODE 2 -#define IR_FIRMODE 4 - -struct pxaficp_platform_data { - int transceiver_cap; - void (*transceiver_mode)(struct device *dev, int mode); - int (*startup)(struct device *dev); - void (*shutdown)(struct device *dev); - int gpio_pwdown; /* powerdown GPIO for the IrDA chip */ - bool gpio_pwdown_inverted; /* gpio_pwdown is inverted */ -}; - -extern void pxa_set_ficp_info(struct pxaficp_platform_data *info); - -#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x) -void pxa2xx_transceiver_mode(struct device *dev, int mode); -#endif - -#endif diff --git a/include/linux/platform_data/irda-sa11x0.h b/include/linux/platform_data/irda-sa11x0.h deleted file mode 100644 index 38f77b5e56cf..000000000000 --- a/include/linux/platform_data/irda-sa11x0.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * arch/arm/include/asm/mach/irda.h - * - * Copyright (C) 2004 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARM_MACH_IRDA_H -#define __ASM_ARM_MACH_IRDA_H - -struct irda_platform_data { - int (*startup)(struct device *); - void (*shutdown)(struct device *); - int (*set_power)(struct device *, unsigned int state); - void (*set_speed)(struct device *, unsigned int speed); -}; - -#endif diff --git a/include/linux/platform_data/isl9305.h b/include/linux/platform_data/isl9305.h index 4ac1a070af0a..6893fdaae7d4 100644 --- a/include/linux/platform_data/isl9305.h +++ b/include/linux/platform_data/isl9305.h @@ -1,14 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * isl9305 - Intersil ISL9305 DCDC regulator * * Copyright 2014 Linaro Ltd * * Author: Mark Brown <broonie@kernel.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. */ #ifndef __ISL9305_H diff --git a/include/linux/platform_data/itco_wdt.h b/include/linux/platform_data/itco_wdt.h index 2ccdce6a4e27..45d860cac2b0 100644 --- a/include/linux/platform_data/itco_wdt.h +++ b/include/linux/platform_data/itco_wdt.h @@ -12,13 +12,16 @@ #define ICH_RES_MEM_OFF 2 #define ICH_RES_MEM_GCS_PMC 0 +/** + * struct itco_wdt_platform_data - iTCO_wdt platform data + * @name: Name of the platform + * @version: iTCO version + * @no_reboot_use_pmc: Use PMC BXT API to set and clear NO_REBOOT bit + */ struct itco_wdt_platform_data { char name[32]; unsigned int version; - /* private data to be passed to update_no_reboot_bit API */ - void *no_reboot_priv; - /* pointer for platform specific no reboot update function */ - int (*update_no_reboot_bit)(void *priv, bool set); + bool no_reboot_use_pmc; }; #endif /* _ITCO_WDT_H_ */ diff --git a/include/linux/platform_data/jz4740/jz4740_nand.h b/include/linux/platform_data/jz4740/jz4740_nand.h deleted file mode 100644 index bc571f6d5ced..000000000000 --- a/include/linux/platform_data/jz4740/jz4740_nand.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de> - * JZ4740 SoC NAND controller driver - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#ifndef __JZ4740_NAND_H__ -#define __JZ4740_NAND_H__ - -#include <linux/mtd/rawnand.h> -#include <linux/mtd/partitions.h> - -#define JZ_NAND_NUM_BANKS 4 - -struct jz_nand_platform_data { - int num_partitions; - struct mtd_partition *partitions; - - unsigned char banks[JZ_NAND_NUM_BANKS]; - - void (*ident_callback)(struct platform_device *, struct mtd_info *, - struct mtd_partition **, int *num_partitions); -}; - -#endif diff --git a/include/linux/platform_data/keyboard-pxa930_rotary.h b/include/linux/platform_data/keyboard-pxa930_rotary.h deleted file mode 100644 index 3271aa01cbe8..000000000000 --- a/include/linux/platform_data/keyboard-pxa930_rotary.h +++ /dev/null @@ -1,21 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_ARCH_PXA930_ROTARY_H -#define __ASM_ARCH_PXA930_ROTARY_H - -/* NOTE: - * - * rotary can be either interpreted as a ralative input event (e.g. - * REL_WHEEL or REL_HWHEEL) or a specific key event (e.g. UP/DOWN - * or LEFT/RIGHT), depending on if up_key & down_key are assigned - * or rel_code is assigned a non-zero value. When all are non-zero, - * up_key and down_key will be preferred. - */ -struct pxa930_rotary_platform_data { - int up_key; - int down_key; - int rel_code; -}; - -void __init pxa930_set_rotarykey_info(struct pxa930_rotary_platform_data *info); - -#endif /* __ASM_ARCH_PXA930_ROTARY_H */ diff --git a/include/linux/platform_data/keyboard-spear.h b/include/linux/platform_data/keyboard-spear.h deleted file mode 100644 index 5e3ff653900c..000000000000 --- a/include/linux/platform_data/keyboard-spear.h +++ /dev/null @@ -1,164 +0,0 @@ -/* - * Copyright (C) 2010 ST Microelectronics - * Rajeev Kumar <rajeevkumar.linux@gmail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __PLAT_KEYBOARD_H -#define __PLAT_KEYBOARD_H - -#include <linux/bitops.h> -#include <linux/input.h> -#include <linux/input/matrix_keypad.h> -#include <linux/types.h> - -#define DECLARE_9x9_KEYMAP(_name) \ -int _name[] = { \ - KEY(0, 0, KEY_ESC), \ - KEY(0, 1, KEY_1), \ - KEY(0, 2, KEY_2), \ - KEY(0, 3, KEY_3), \ - KEY(0, 4, KEY_4), \ - KEY(0, 5, KEY_5), \ - KEY(0, 6, KEY_6), \ - KEY(0, 7, KEY_7), \ - KEY(0, 8, KEY_8), \ - KEY(1, 0, KEY_9), \ - KEY(1, 1, KEY_MINUS), \ - KEY(1, 2, KEY_EQUAL), \ - KEY(1, 3, KEY_BACKSPACE), \ - KEY(1, 4, KEY_TAB), \ - KEY(1, 5, KEY_Q), \ - KEY(1, 6, KEY_W), \ - KEY(1, 7, KEY_E), \ - KEY(1, 8, KEY_R), \ - KEY(2, 0, KEY_T), \ - KEY(2, 1, KEY_Y), \ - KEY(2, 2, KEY_U), \ - KEY(2, 3, KEY_I), \ - KEY(2, 4, KEY_O), \ - KEY(2, 5, KEY_P), \ - KEY(2, 6, KEY_LEFTBRACE), \ - KEY(2, 7, KEY_RIGHTBRACE), \ - KEY(2, 8, KEY_ENTER), \ - KEY(3, 0, KEY_LEFTCTRL), \ - KEY(3, 1, KEY_A), \ - KEY(3, 2, KEY_S), \ - KEY(3, 3, KEY_D), \ - KEY(3, 4, KEY_F), \ - KEY(3, 5, KEY_G), \ - KEY(3, 6, KEY_H), \ - KEY(3, 7, KEY_J), \ - KEY(3, 8, KEY_K), \ - KEY(4, 0, KEY_L), \ - KEY(4, 1, KEY_SEMICOLON), \ - KEY(4, 2, KEY_APOSTROPHE), \ - KEY(4, 3, KEY_GRAVE), \ - KEY(4, 4, KEY_LEFTSHIFT), \ - KEY(4, 5, KEY_BACKSLASH), \ - KEY(4, 6, KEY_Z), \ - KEY(4, 7, KEY_X), \ - KEY(4, 8, KEY_C), \ - KEY(5, 0, KEY_V), \ - KEY(5, 1, KEY_B), \ - KEY(5, 2, KEY_N), \ - KEY(5, 3, KEY_M), \ - KEY(5, 4, KEY_COMMA), \ - KEY(5, 5, KEY_DOT), \ - KEY(5, 6, KEY_SLASH), \ - KEY(5, 7, KEY_RIGHTSHIFT), \ - KEY(5, 8, KEY_KPASTERISK), \ - KEY(6, 0, KEY_LEFTALT), \ - KEY(6, 1, KEY_SPACE), \ - KEY(6, 2, KEY_CAPSLOCK), \ - KEY(6, 3, KEY_F1), \ - KEY(6, 4, KEY_F2), \ - KEY(6, 5, KEY_F3), \ - KEY(6, 6, KEY_F4), \ - KEY(6, 7, KEY_F5), \ - KEY(6, 8, KEY_F6), \ - KEY(7, 0, KEY_F7), \ - KEY(7, 1, KEY_F8), \ - KEY(7, 2, KEY_F9), \ - KEY(7, 3, KEY_F10), \ - KEY(7, 4, KEY_NUMLOCK), \ - KEY(7, 5, KEY_SCROLLLOCK), \ - KEY(7, 6, KEY_KP7), \ - KEY(7, 7, KEY_KP8), \ - KEY(7, 8, KEY_KP9), \ - KEY(8, 0, KEY_KPMINUS), \ - KEY(8, 1, KEY_KP4), \ - KEY(8, 2, KEY_KP5), \ - KEY(8, 3, KEY_KP6), \ - KEY(8, 4, KEY_KPPLUS), \ - KEY(8, 5, KEY_KP1), \ - KEY(8, 6, KEY_KP2), \ - KEY(8, 7, KEY_KP3), \ - KEY(8, 8, KEY_KP0), \ -} - -#define DECLARE_6x6_KEYMAP(_name) \ -int _name[] = { \ - KEY(0, 0, KEY_RESERVED), \ - KEY(0, 1, KEY_1), \ - KEY(0, 2, KEY_2), \ - KEY(0, 3, KEY_3), \ - KEY(0, 4, KEY_4), \ - KEY(0, 5, KEY_5), \ - KEY(1, 0, KEY_Q), \ - KEY(1, 1, KEY_W), \ - KEY(1, 2, KEY_E), \ - KEY(1, 3, KEY_R), \ - KEY(1, 4, KEY_T), \ - KEY(1, 5, KEY_Y), \ - KEY(2, 0, KEY_D), \ - KEY(2, 1, KEY_F), \ - KEY(2, 2, KEY_G), \ - KEY(2, 3, KEY_H), \ - KEY(2, 4, KEY_J), \ - KEY(2, 5, KEY_K), \ - KEY(3, 0, KEY_B), \ - KEY(3, 1, KEY_N), \ - KEY(3, 2, KEY_M), \ - KEY(3, 3, KEY_COMMA), \ - KEY(3, 4, KEY_DOT), \ - KEY(3, 5, KEY_SLASH), \ - KEY(4, 0, KEY_F6), \ - KEY(4, 1, KEY_F7), \ - KEY(4, 2, KEY_F8), \ - KEY(4, 3, KEY_F9), \ - KEY(4, 4, KEY_F10), \ - KEY(4, 5, KEY_NUMLOCK), \ - KEY(5, 0, KEY_KP2), \ - KEY(5, 1, KEY_KP3), \ - KEY(5, 2, KEY_KP0), \ - KEY(5, 3, KEY_KPDOT), \ - KEY(5, 4, KEY_RO), \ - KEY(5, 5, KEY_ZENKAKUHANKAKU), \ -} - -#define KEYPAD_9x9 0 -#define KEYPAD_6x6 1 -#define KEYPAD_2x2 2 - -/** - * struct kbd_platform_data - spear keyboard platform data - * keymap: pointer to keymap data (table and size) - * rep: enables key autorepeat - * mode: choose keyboard support(9x9, 6x6, 2x2) - * suspended_rate: rate at which keyboard would operate in suspended mode - * - * This structure is supposed to be used by platform code to supply - * keymaps to drivers that implement keyboards. - */ -struct kbd_platform_data { - const struct matrix_keymap_data *keymap; - bool rep; - unsigned int mode; - unsigned int suspended_rate; -}; - -#endif /* __PLAT_KEYBOARD_H */ diff --git a/include/linux/platform_data/keypad-ep93xx.h b/include/linux/platform_data/keypad-ep93xx.h deleted file mode 100644 index 0e36818e3680..000000000000 --- a/include/linux/platform_data/keypad-ep93xx.h +++ /dev/null @@ -1,32 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __KEYPAD_EP93XX_H -#define __KEYPAD_EP93XX_H - -struct matrix_keymap_data; - -/* flags for the ep93xx_keypad driver */ -#define EP93XX_KEYPAD_DISABLE_3_KEY (1<<0) /* disable 3-key reset */ -#define EP93XX_KEYPAD_DIAG_MODE (1<<1) /* diagnostic mode */ -#define EP93XX_KEYPAD_BACK_DRIVE (1<<2) /* back driving mode */ -#define EP93XX_KEYPAD_TEST_MODE (1<<3) /* scan only column 0 */ -#define EP93XX_KEYPAD_KDIV (1<<4) /* 1/4 clock or 1/16 clock */ -#define EP93XX_KEYPAD_AUTOREPEAT (1<<5) /* enable key autorepeat */ - -/** - * struct ep93xx_keypad_platform_data - platform specific device structure - * @keymap_data: pointer to &matrix_keymap_data - * @debounce: debounce start count; terminal count is 0xff - * @prescale: row/column counter pre-scaler load value - * @flags: see above - */ -struct ep93xx_keypad_platform_data { - struct matrix_keymap_data *keymap_data; - unsigned int debounce; - unsigned int prescale; - unsigned int flags; -}; - -#define EP93XX_MATRIX_ROWS (8) -#define EP93XX_MATRIX_COLS (8) - -#endif /* __KEYPAD_EP93XX_H */ diff --git a/include/linux/platform_data/keypad-nomadik-ske.h b/include/linux/platform_data/keypad-nomadik-ske.h deleted file mode 100644 index 31382fbc07dc..000000000000 --- a/include/linux/platform_data/keypad-nomadik-ske.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License Terms: GNU General Public License v2 - * Author: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com> - * - * ux500 Scroll key and Keypad Encoder (SKE) header - */ - -#ifndef __SKE_H -#define __SKE_H - -#include <linux/input/matrix_keypad.h> - -/* register definitions for SKE peripheral */ -#define SKE_CR 0x00 -#define SKE_VAL0 0x04 -#define SKE_VAL1 0x08 -#define SKE_DBCR 0x0C -#define SKE_IMSC 0x10 -#define SKE_RIS 0x14 -#define SKE_MIS 0x18 -#define SKE_ICR 0x1C - -/* - * Keypad module - */ - -/** - * struct keypad_platform_data - structure for platform specific data - * @init: pointer to keypad init function - * @exit: pointer to keypad deinitialisation function - * @keymap_data: matrix scan code table for keycodes - * @krow: maximum number of rows - * @kcol: maximum number of columns - * @debounce_ms: platform specific debounce time - * @no_autorepeat: flag for auto repetition - * @wakeup_enable: allow waking up the system - */ -struct ske_keypad_platform_data { - int (*init)(void); - int (*exit)(void); - const struct matrix_keymap_data *keymap_data; - u8 krow; - u8 kcol; - u8 debounce_ms; - bool no_autorepeat; - bool wakeup_enable; -}; -#endif /*__SKE_KPD_H*/ diff --git a/include/linux/platform_data/keypad-omap.h b/include/linux/platform_data/keypad-omap.h index c3a3abae98f0..f3f1311cdf3a 100644 --- a/include/linux/platform_data/keypad-omap.h +++ b/include/linux/platform_data/keypad-omap.h @@ -1,9 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __KEYPAD_OMAP_H #define __KEYPAD_OMAP_H @@ -22,9 +19,6 @@ struct omap_kp_platform_data { bool rep; unsigned long delay; bool dbounce; - /* specific to OMAP242x*/ - unsigned int *row_gpios; - unsigned int *col_gpios; }; /* Group (0..3) -- when multiple keys are pressed, only the diff --git a/include/linux/platform_data/keypad-pxa27x.h b/include/linux/platform_data/keypad-pxa27x.h deleted file mode 100644 index a376442b9935..000000000000 --- a/include/linux/platform_data/keypad-pxa27x.h +++ /dev/null @@ -1,73 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_ARCH_PXA27x_KEYPAD_H -#define __ASM_ARCH_PXA27x_KEYPAD_H - -#include <linux/input.h> -#include <linux/input/matrix_keypad.h> - -#define MAX_MATRIX_KEY_ROWS (8) -#define MAX_MATRIX_KEY_COLS (8) -#define MATRIX_ROW_SHIFT (3) -#define MAX_DIRECT_KEY_NUM (8) - -/* pxa3xx keypad platform specific parameters - * - * NOTE: - * 1. direct_key_num indicates the number of keys in the direct keypad - * _plus_ the number of rotary-encoder sensor inputs, this can be - * left as 0 if only rotary encoders are enabled, the driver will - * automatically calculate this - * - * 2. direct_key_map is the key code map for the direct keys, if rotary - * encoder(s) are enabled, direct key 0/1(2/3) will be ignored - * - * 3. rotary can be either interpreted as a relative input event (e.g. - * REL_WHEEL/REL_HWHEEL) or specific keys (e.g. UP/DOWN/LEFT/RIGHT) - * - * 4. matrix key and direct key will use the same debounce_interval by - * default, which should be sufficient in most cases - * - * pxa168 keypad platform specific parameter - * - * NOTE: - * clear_wakeup_event callback is a workaround required to clear the - * keypad interrupt. The keypad wake must be cleared in addition to - * reading the MI/DI bits in the KPC register. - */ -struct pxa27x_keypad_platform_data { - - /* code map for the matrix keys */ - const struct matrix_keymap_data *matrix_keymap_data; - unsigned int matrix_key_rows; - unsigned int matrix_key_cols; - - /* direct keys */ - int direct_key_num; - unsigned int direct_key_map[MAX_DIRECT_KEY_NUM]; - /* the key output may be low active */ - int direct_key_low_active; - /* give board a chance to choose the start direct key */ - unsigned int direct_key_mask; - - /* rotary encoders 0 */ - int enable_rotary0; - int rotary0_rel_code; - int rotary0_up_key; - int rotary0_down_key; - - /* rotary encoders 1 */ - int enable_rotary1; - int rotary1_rel_code; - int rotary1_up_key; - int rotary1_down_key; - - /* key debounce interval */ - unsigned int debounce_interval; - - /* clear wakeup event requirement for pxa168 */ - void (*clear_wakeup_event)(void); -}; - -extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info); - -#endif /* __ASM_ARCH_PXA27x_KEYPAD_H */ diff --git a/include/linux/platform_data/keypad-w90p910.h b/include/linux/platform_data/keypad-w90p910.h deleted file mode 100644 index 206ca4ecd93f..000000000000 --- a/include/linux/platform_data/keypad-w90p910.h +++ /dev/null @@ -1,16 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_ARCH_W90P910_KEYPAD_H -#define __ASM_ARCH_W90P910_KEYPAD_H - -#include <linux/input/matrix_keypad.h> - -extern void mfp_set_groupi(struct device *dev); - -struct w90p910_keypad_platform_data { - const struct matrix_keymap_data *keymap_data; - - unsigned int prescale; - unsigned int debounce; -}; - -#endif /* __ASM_ARCH_W90P910_KEYPAD_H */ diff --git a/include/linux/platform_data/keyscan-davinci.h b/include/linux/platform_data/keyscan-davinci.h deleted file mode 100644 index 7a560e05bda8..000000000000 --- a/include/linux/platform_data/keyscan-davinci.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright (C) 2009 Texas Instruments, Inc - * - * Author: Miguel Aguilar <miguel.aguilar@ridgerun.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef DAVINCI_KEYSCAN_H -#define DAVINCI_KEYSCAN_H - -#include <linux/io.h> - -enum davinci_matrix_types { - DAVINCI_KEYSCAN_MATRIX_4X4, - DAVINCI_KEYSCAN_MATRIX_5X3, -}; - -struct davinci_ks_platform_data { - int (*device_enable)(struct device *dev); - unsigned short *keymap; - u32 keymapsize; - u8 rep:1; - u8 strobe; - u8 interval; - u8 matrix_type; -}; - -#endif - diff --git a/include/linux/platform_data/lcd-mipid.h b/include/linux/platform_data/lcd-mipid.h index 63f05eb23827..4927cfc5158c 100644 --- a/include/linux/platform_data/lcd-mipid.h +++ b/include/linux/platform_data/lcd-mipid.h @@ -15,10 +15,8 @@ enum mipid_test_result { #ifdef __KERNEL__ struct mipid_platform_data { - int nreset_gpio; int data_lines; - void (*shutdown)(struct mipid_platform_data *pdata); void (*set_bklight_level)(struct mipid_platform_data *pdata, int level); int (*get_bklight_level)(struct mipid_platform_data *pdata); diff --git a/include/linux/platform_data/leds-kirkwood-netxbig.h b/include/linux/platform_data/leds-kirkwood-netxbig.h deleted file mode 100644 index 3c85a735c380..000000000000 --- a/include/linux/platform_data/leds-kirkwood-netxbig.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * Platform data structure for netxbig LED driver - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __LEDS_KIRKWOOD_NETXBIG_H -#define __LEDS_KIRKWOOD_NETXBIG_H - -struct netxbig_gpio_ext { - unsigned *addr; - int num_addr; - unsigned *data; - int num_data; - unsigned enable; -}; - -enum netxbig_led_mode { - NETXBIG_LED_OFF, - NETXBIG_LED_ON, - NETXBIG_LED_SATA, - NETXBIG_LED_TIMER1, - NETXBIG_LED_TIMER2, - NETXBIG_LED_MODE_NUM, -}; - -#define NETXBIG_LED_INVALID_MODE NETXBIG_LED_MODE_NUM - -struct netxbig_led_timer { - unsigned long delay_on; - unsigned long delay_off; - enum netxbig_led_mode mode; -}; - -struct netxbig_led { - const char *name; - const char *default_trigger; - int mode_addr; - int *mode_val; - int bright_addr; - int bright_max; -}; - -struct netxbig_led_platform_data { - struct netxbig_gpio_ext *gpio_ext; - struct netxbig_led_timer *timer; - int num_timer; - struct netxbig_led *leds; - int num_leds; -}; - -#endif /* __LEDS_KIRKWOOD_NETXBIG_H */ diff --git a/include/linux/platform_data/leds-kirkwood-ns2.h b/include/linux/platform_data/leds-kirkwood-ns2.h deleted file mode 100644 index eb8a6860e816..000000000000 --- a/include/linux/platform_data/leds-kirkwood-ns2.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * Platform data structure for Network Space v2 LED driver - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __LEDS_KIRKWOOD_NS2_H -#define __LEDS_KIRKWOOD_NS2_H - -enum ns2_led_modes { - NS_V2_LED_OFF, - NS_V2_LED_ON, - NS_V2_LED_SATA, -}; - -struct ns2_led_modval { - enum ns2_led_modes mode; - int cmd_level; - int slow_level; -}; - -struct ns2_led { - const char *name; - const char *default_trigger; - unsigned cmd; - unsigned slow; - int num_modes; - struct ns2_led_modval *modval; -}; - -struct ns2_led_platform_data { - int num_leds; - struct ns2_led *leds; -}; - -#endif /* __LEDS_KIRKWOOD_NS2_H */ diff --git a/include/linux/platform_data/leds-lm355x.h b/include/linux/platform_data/leds-lm355x.h index b88724bb0b46..b1090487b4b0 100644 --- a/include/linux/platform_data/leds-lm355x.h +++ b/include/linux/platform_data/leds-lm355x.h @@ -1,8 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2012 Texas Instruments * - * License Terms: GNU General Public License v2 - * * Simple driver for Texas Instruments LM355x LED driver chip * * Author: G.Shark Jeong <gshark.jeong@gmail.com> diff --git a/include/linux/platform_data/leds-lm3642.h b/include/linux/platform_data/leds-lm3642.h index 72d6ee6ade57..2490a2fb6549 100644 --- a/include/linux/platform_data/leds-lm3642.h +++ b/include/linux/platform_data/leds-lm3642.h @@ -1,8 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2012 Texas Instruments * -* License Terms: GNU General Public License v2 -* * Simple driver for Texas Instruments LM3642 LED driver chip * * Author: G.Shark Jeong <gshark.jeong@gmail.com> diff --git a/include/linux/platform_data/leds-lp55xx.h b/include/linux/platform_data/leds-lp55xx.h index 624ff9edad6f..3cc8db0b12b5 100644 --- a/include/linux/platform_data/leds-lp55xx.h +++ b/include/linux/platform_data/leds-lp55xx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * LP55XX Platform Data Header * @@ -5,27 +6,32 @@ * * Author: Milo(Woogyom) Kim <milo.kim@ti.com> * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * * Derived from leds-lp5521.h, leds-lp5523.h */ #ifndef _LEDS_LP55XX_H #define _LEDS_LP55XX_H +#include <linux/gpio/consumer.h> +#include <linux/led-class-multicolor.h> + /* Clock configuration */ #define LP55XX_CLOCK_AUTO 0 #define LP55XX_CLOCK_INT 1 #define LP55XX_CLOCK_EXT 2 +#define LP55XX_MAX_GROUPED_CHAN 4 + struct lp55xx_led_config { const char *name; const char *default_trigger; u8 chan_nr; u8 led_current; /* mA x10, 0 if led is not connected */ u8 max_current; + int num_colors; + unsigned int max_channel; + int color_id[LED_COLOR_ID_MAX]; + int output_num[LED_COLOR_ID_MAX]; }; struct lp55xx_predef_pattern { @@ -52,7 +58,7 @@ enum lp8501_pwr_sel { * @clock_mode : Input clock mode. LP55XX_CLOCK_AUTO or _INT or _EXT * @setup_resources : Platform specific function before enabling the chip * @release_resources : Platform specific function after disabling the chip - * @enable : EN pin control by platform side + * @enable_gpiod : enable GPIO descriptor * @patterns : Predefined pattern data for RGB channels * @num_patterns : Number of patterns * @update_config : Value of CONFIG register @@ -67,8 +73,11 @@ struct lp55xx_platform_data { /* Clock configuration */ u8 clock_mode; + /* Charge pump mode */ + u32 charge_pump_mode; + /* optional enable GPIO */ - int enable_gpio; + struct gpio_desc *enable_gpiod; /* Predefined pattern data */ struct lp55xx_predef_pattern *patterns; diff --git a/include/linux/platform_data/leds-omap.h b/include/linux/platform_data/leds-omap.h deleted file mode 100644 index 56c9b2a0ada5..000000000000 --- a/include/linux/platform_data/leds-omap.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright (C) 2006 Samsung Electronics - * Kyungmin Park <kyungmin.park@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef ASMARM_ARCH_LED_H -#define ASMARM_ARCH_LED_H - -struct omap_led_config { - struct led_classdev cdev; - s16 gpio; -}; - -struct omap_led_platform_data { - s16 nr_leds; - struct omap_led_config *leds; -}; - -#endif diff --git a/include/linux/platform_data/leds-pca963x.h b/include/linux/platform_data/leds-pca963x.h deleted file mode 100644 index 54e845ffb5ed..000000000000 --- a/include/linux/platform_data/leds-pca963x.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * PCA963X LED chip driver. - * - * Copyright 2012 bct electronic GmbH - * Copyright 2013 Qtechnology A/S - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - */ - -#ifndef __LINUX_PCA963X_H -#define __LINUX_PCA963X_H -#include <linux/leds.h> - -enum pca963x_outdrv { - PCA963X_OPEN_DRAIN, - PCA963X_TOTEM_POLE, /* aka push-pull */ -}; - -enum pca963x_blink_type { - PCA963X_SW_BLINK, - PCA963X_HW_BLINK, -}; - -enum pca963x_direction { - PCA963X_NORMAL, - PCA963X_INVERTED, -}; - -struct pca963x_platform_data { - struct led_platform_data leds; - enum pca963x_outdrv outdrv; - enum pca963x_blink_type blink_type; - enum pca963x_direction dir; -}; - -#endif /* __LINUX_PCA963X_H*/ diff --git a/include/linux/platform_data/leds-s3c24xx.h b/include/linux/platform_data/leds-s3c24xx.h deleted file mode 100644 index 441a6f290649..000000000000 --- a/include/linux/platform_data/leds-s3c24xx.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (c) 2006 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX - LEDs GPIO connector - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __LEDS_S3C24XX_H -#define __LEDS_S3C24XX_H - -#define S3C24XX_LEDF_ACTLOW (1<<0) /* LED is on when GPIO low */ -#define S3C24XX_LEDF_TRISTATE (1<<1) /* tristate to turn off */ - -struct s3c24xx_led_platdata { - unsigned int gpio; - unsigned int flags; - - char *name; - char *def_trigger; -}; - -#endif /* __LEDS_S3C24XX_H */ diff --git a/include/linux/platform_data/lenovo-yoga-c630.h b/include/linux/platform_data/lenovo-yoga-c630.h new file mode 100644 index 000000000000..5d1f9fb33cfc --- /dev/null +++ b/include/linux/platform_data/lenovo-yoga-c630.h @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2022-2024, Linaro Ltd + * Authors: + * Bjorn Andersson + * Dmitry Baryshkov + */ + +#ifndef _LENOVO_YOGA_C630_DATA_H +#define _LENOVO_YOGA_C630_DATA_H + +struct yoga_c630_ec; +struct notifier_block; + +#define YOGA_C630_MOD_NAME "lenovo_yoga_c630" + +#define YOGA_C630_DEV_UCSI "ucsi" +#define YOGA_C630_DEV_PSY "psy" + +int yoga_c630_ec_read8(struct yoga_c630_ec *ec, u8 addr); +int yoga_c630_ec_read16(struct yoga_c630_ec *ec, u8 addr); + +int yoga_c630_ec_register_notify(struct yoga_c630_ec *ec, struct notifier_block *nb); +void yoga_c630_ec_unregister_notify(struct yoga_c630_ec *ec, struct notifier_block *nb); + +#define YOGA_C630_UCSI_WRITE_SIZE 8 +#define YOGA_C630_UCSI_CCI_SIZE 4 +#define YOGA_C630_UCSI_DATA_SIZE 16 +#define YOGA_C630_UCSI_READ_SIZE (YOGA_C630_UCSI_CCI_SIZE + YOGA_C630_UCSI_DATA_SIZE) + +u16 yoga_c630_ec_ucsi_get_version(struct yoga_c630_ec *ec); +int yoga_c630_ec_ucsi_write(struct yoga_c630_ec *ec, + const u8 req[YOGA_C630_UCSI_WRITE_SIZE]); +int yoga_c630_ec_ucsi_read(struct yoga_c630_ec *ec, + u8 resp[YOGA_C630_UCSI_READ_SIZE]); + +#define LENOVO_EC_EVENT_USB 0x20 +#define LENOVO_EC_EVENT_UCSI 0x21 +#define LENOVO_EC_EVENT_HPD 0x22 +#define LENOVO_EC_EVENT_BAT_STATUS 0x24 +#define LENOVO_EC_EVENT_BAT_INFO 0x25 +#define LENOVO_EC_EVENT_BAT_ADPT_STATUS 0x37 + +#endif diff --git a/include/linux/platform_data/lm3630a_bl.h b/include/linux/platform_data/lm3630a_bl.h index 7538e38e270b..530be9318711 100644 --- a/include/linux/platform_data/lm3630a_bl.h +++ b/include/linux/platform_data/lm3630a_bl.h @@ -1,11 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Simple driver for Texas Instruments LM3630A LED Flash driver chip * Copyright (C) 2012 Texas Instruments -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -* */ #ifndef __LINUX_LM3630A_H @@ -38,9 +34,11 @@ enum lm3630a_ledb_ctrl { #define LM3630A_MAX_BRIGHTNESS 255 /* + *@leda_label : optional led a label. *@leda_init_brt : led a init brightness. 4~255 *@leda_max_brt : led a max brightness. 4~255 *@leda_ctrl : led a disable, enable linear, enable exponential + *@ledb_label : optional led b label. *@ledb_init_brt : led b init brightness. 4~255 *@ledb_max_brt : led b max brightness. 4~255 *@ledb_ctrl : led b disable, enable linear, enable exponential @@ -50,10 +48,12 @@ enum lm3630a_ledb_ctrl { struct lm3630a_platform_data { /* led a config. */ + const char *leda_label; int leda_init_brt; int leda_max_brt; enum lm3630a_leda_ctrl leda_ctrl; /* led b config. */ + const char *ledb_label; int ledb_init_brt; int ledb_max_brt; enum lm3630a_ledb_ctrl ledb_ctrl; diff --git a/include/linux/platform_data/lm3639_bl.h b/include/linux/platform_data/lm3639_bl.h index 5234cd5ed166..341f24051db4 100644 --- a/include/linux/platform_data/lm3639_bl.h +++ b/include/linux/platform_data/lm3639_bl.h @@ -1,11 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Simple driver for Texas Instruments LM3630 LED Flash driver chip * Copyright (C) 2012 Texas Instruments -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -* */ #ifndef __LINUX_LM3639_H diff --git a/include/linux/platform_data/lm8323.h b/include/linux/platform_data/lm8323.h index 478d668bc590..311999260614 100644 --- a/include/linux/platform_data/lm8323.h +++ b/include/linux/platform_data/lm8323.h @@ -1,18 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * lm8323.h - Configuration for LM8323 keypad driver. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation (version 2 of the License only). - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __LINUX_LM8323_H diff --git a/include/linux/platform_data/lp855x.h b/include/linux/platform_data/lp855x.h index 1b2ba24e4e03..3b4a891acefe 100644 --- a/include/linux/platform_data/lp855x.h +++ b/include/linux/platform_data/lp855x.h @@ -1,12 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * LP855x Backlight Driver * * Copyright (C) 2011 Texas Instruments - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef _LP855X_H @@ -128,12 +124,12 @@ struct lp855x_rom_data { }; /** - * struct lp855x_platform_data + * struct lp855x_platform_data - lp855 platform-specific data * @name : Backlight driver name. If it is not defined, default name is set. * @device_control : value of DEVICE CONTROL register * @initial_brightness : initial value of backlight brightness * @period_ns : platform specific pwm period value. unit is nano. - Only valid when mode is PWM_BASED. + * Only valid when mode is PWM_BASED. * @size_program : total size of lp855x_rom_data * @rom_data : list of new eeprom/eprom registers */ diff --git a/include/linux/platform_data/lp8727.h b/include/linux/platform_data/lp8727.h index 47128a50e04e..c701a7b96f0b 100644 --- a/include/linux/platform_data/lp8727.h +++ b/include/linux/platform_data/lp8727.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * LP8727 Micro/Mini USB IC with integrated charger * * Copyright (C) 2011 Texas Instruments * Copyright (C) 2011 National Semiconductor - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _LP8727_H diff --git a/include/linux/platform_data/lp8755.h b/include/linux/platform_data/lp8755.h index a7fd0776c9bf..7bf4221d62dd 100644 --- a/include/linux/platform_data/lp8755.h +++ b/include/linux/platform_data/lp8755.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * LP8755 High Performance Power Management Unit Driver:System Interface Driver * @@ -5,11 +6,6 @@ * * Author: Daniel(Geon Si) Jeong <daniel.jeong@ti.com> * G.Shark Jeong <gshark.jeong@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef _LP8755_H diff --git a/include/linux/platform_data/ltc4245.h b/include/linux/platform_data/ltc4245.h index 56bda4be0016..f07fa05ea6c4 100644 --- a/include/linux/platform_data/ltc4245.h +++ b/include/linux/platform_data/ltc4245.h @@ -1,12 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Platform Data for LTC4245 hardware monitor chip * * Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. */ #ifndef LINUX_LTC4245_H diff --git a/include/linux/platform_data/lv5207lp.h b/include/linux/platform_data/lv5207lp.h index 7dc4d9a219a6..95d85c1394bc 100644 --- a/include/linux/platform_data/lv5207lp.h +++ b/include/linux/platform_data/lv5207lp.h @@ -1,9 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * lv5207lp.h - Sanyo LV5207LP LEDs Driver - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __LV5207LP_H__ #define __LV5207LP_H__ @@ -11,7 +8,7 @@ struct device; struct lv5207lp_platform_data { - struct device *fbdev; + struct device *dev; unsigned int max_value; unsigned int def_value; }; diff --git a/include/linux/platform_data/macb.h b/include/linux/platform_data/macb.h deleted file mode 100644 index 7815d50c26ff..000000000000 --- a/include/linux/platform_data/macb.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Copyright (C) 2004-2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __MACB_PDATA_H__ -#define __MACB_PDATA_H__ - -#include <linux/clk.h> - -/** - * struct macb_platform_data - platform data for MACB Ethernet - * @phy_mask: phy mask passed when register the MDIO bus - * within the driver - * @phy_irq_pin: PHY IRQ - * @is_rmii: using RMII interface? - * @rev_eth_addr: reverse Ethernet address byte order - * @pclk: platform clock - * @hclk: AHB clock - */ -struct macb_platform_data { - u32 phy_mask; - int phy_irq_pin; - u8 is_rmii; - u8 rev_eth_addr; - struct clk *pclk; - struct clk *hclk; -}; - -#endif /* __MACB_PDATA_H__ */ diff --git a/include/linux/platform_data/max197.h b/include/linux/platform_data/max197.h index 8da8f94ee15c..03ef46f9cd65 100644 --- a/include/linux/platform_data/max197.h +++ b/include/linux/platform_data/max197.h @@ -1,14 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Maxim MAX197 A/D Converter Driver * * Copyright (c) 2012 Savoir-faire Linux Inc. * Vivien Didelot <vivien.didelot@savoirfairelinux.com> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * For further information, see the Documentation/hwmon/max197 file. + * For further information, see the Documentation/hwmon/max197.rst file. */ #ifndef _PDATA_MAX197_H diff --git a/include/linux/platform_data/max6639.h b/include/linux/platform_data/max6639.h deleted file mode 100644 index 65bfdb4fdc15..000000000000 --- a/include/linux/platform_data/max6639.h +++ /dev/null @@ -1,15 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _LINUX_MAX6639_H -#define _LINUX_MAX6639_H - -#include <linux/types.h> - -/* platform data for the MAX6639 temperature sensor and fan control */ - -struct max6639_platform_data { - bool pwm_polarity; /* Polarity low (0) or high (1, default) */ - int ppr; /* Pulses per rotation 1..4 (default == 2) */ - int rpm_range; /* 2000, 4000 (default), 8000 or 16000 */ -}; - -#endif /* _LINUX_MAX6639_H */ diff --git a/include/linux/platform_data/max6697.h b/include/linux/platform_data/max6697.h deleted file mode 100644 index ed9d3b3daf02..000000000000 --- a/include/linux/platform_data/max6697.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * max6697.h - * Copyright (c) 2012 Guenter Roeck <linux@roeck-us.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef MAX6697_H -#define MAX6697_H - -#include <linux/types.h> - -/* - * For all bit masks: - * bit 0: local temperature - * bit 1..7: remote temperatures - */ -struct max6697_platform_data { - bool smbus_timeout_disable; /* set to disable SMBus timeouts */ - bool extended_range_enable; /* set to enable extended temp range */ - bool beta_compensation; /* set to enable beta compensation */ - u8 alert_mask; /* set bit to 1 to disable alert */ - u8 over_temperature_mask; /* set bit to 1 to disable */ - u8 resistance_cancellation; /* set bit to 0 to disable - * bit mask for MAX6581, - * boolean for other chips - */ - u8 ideality_mask; /* set bit to 0 to disable */ - u8 ideality_value; /* transistor ideality as per - * MAX6581 datasheet - */ -}; - -#endif /* MAX6697_H */ diff --git a/include/linux/platform_data/max732x.h b/include/linux/platform_data/max732x.h index f231c635faec..423999207cd5 100644 --- a/include/linux/platform_data/max732x.h +++ b/include/linux/platform_data/max732x.h @@ -7,17 +7,5 @@ struct max732x_platform_data { /* number of the first GPIO */ unsigned gpio_base; - - /* interrupt base */ - int irq_base; - - void *context; /* param to setup/teardown */ - - int (*setup)(struct i2c_client *client, - unsigned gpio, unsigned ngpio, - void *context); - int (*teardown)(struct i2c_client *client, - unsigned gpio, unsigned ngpio, - void *context); }; #endif /* __LINUX_I2C_MAX732X_H */ diff --git a/include/linux/platform_data/mcs.h b/include/linux/platform_data/mcs.h deleted file mode 100644 index 61bb18a4fd3c..000000000000 --- a/include/linux/platform_data/mcs.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Copyright (C) 2009 - 2010 Samsung Electronics Co.Ltd - * Author: Joonyoung Shim <jy0922.shim@samsung.com> - * Author: HeungJun Kim <riverful.kim@samsung.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef __LINUX_MCS_H -#define __LINUX_MCS_H - -#define MCS_KEY_MAP(v, c) ((((v) & 0xff) << 16) | ((c) & 0xffff)) -#define MCS_KEY_VAL(v) (((v) >> 16) & 0xff) -#define MCS_KEY_CODE(v) ((v) & 0xffff) - -struct mcs_platform_data { - void (*poweron)(bool); - void (*cfg_pin)(void); - - /* touchscreen */ - unsigned int x_size; - unsigned int y_size; - - /* touchkey */ - const u32 *keymap; - unsigned int keymap_size; - unsigned int key_maxval; - bool no_autorepeat; -}; - -#endif /* __LINUX_MCS_H */ diff --git a/include/linux/platform_data/mdio-bcm-unimac.h b/include/linux/platform_data/mdio-bcm-unimac.h index 8a5f9f0b2c52..724e1f57b81f 100644 --- a/include/linux/platform_data/mdio-bcm-unimac.h +++ b/include/linux/platform_data/mdio-bcm-unimac.h @@ -1,11 +1,14 @@ #ifndef __MDIO_BCM_UNIMAC_PDATA_H #define __MDIO_BCM_UNIMAC_PDATA_H +struct clk; + struct unimac_mdio_pdata { u32 phy_mask; int (*wait_func)(void *data); void *wait_func_data; const char *bus_name; + struct clk *clk; }; #define UNIMAC_MDIO_DRV_NAME "unimac-mdio" diff --git a/include/linux/platform_data/media/camera-mx2.h b/include/linux/platform_data/media/camera-mx2.h deleted file mode 100644 index 7ded6f1f74bc..000000000000 --- a/include/linux/platform_data/media/camera-mx2.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * mx2-cam.h - i.MX27/i.MX25 camera driver header file - * - * Copyright (C) 2003, Intel Corporation - * Copyright (C) 2008, Sascha Hauer <s.hauer@pengutronix.de> - * Copyright (C) 2010, Baruch Siach <baruch@tkos.co.il> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#ifndef __MACH_MX2_CAM_H_ -#define __MACH_MX2_CAM_H_ - -#define MX2_CAMERA_EXT_VSYNC (1 << 1) -#define MX2_CAMERA_CCIR (1 << 2) -#define MX2_CAMERA_CCIR_INTERLACE (1 << 3) -#define MX2_CAMERA_HSYNC_HIGH (1 << 4) -#define MX2_CAMERA_GATED_CLOCK (1 << 5) -#define MX2_CAMERA_INV_DATA (1 << 6) -#define MX2_CAMERA_PCLK_SAMPLE_RISING (1 << 7) - -/** - * struct mx2_camera_platform_data - optional platform data for mx2_camera - * @flags: any combination of MX2_CAMERA_* - * @clk: clock rate of the csi block / 2 - */ -struct mx2_camera_platform_data { - unsigned long flags; - unsigned long clk; -}; - -#endif /* __MACH_MX2_CAM_H_ */ diff --git a/include/linux/platform_data/media/camera-mx3.h b/include/linux/platform_data/media/camera-mx3.h deleted file mode 100644 index a910dadc8258..000000000000 --- a/include/linux/platform_data/media/camera-mx3.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * mx3_camera.h - i.MX3x camera driver header file - * - * Copyright (C) 2008, Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef _MX3_CAMERA_H_ -#define _MX3_CAMERA_H_ - -#include <linux/device.h> - -#define MX3_CAMERA_CLK_SRC 1 -#define MX3_CAMERA_EXT_VSYNC 2 -#define MX3_CAMERA_DP 4 -#define MX3_CAMERA_PCP 8 -#define MX3_CAMERA_HSP 0x10 -#define MX3_CAMERA_VSP 0x20 -#define MX3_CAMERA_DATAWIDTH_4 0x40 -#define MX3_CAMERA_DATAWIDTH_8 0x80 -#define MX3_CAMERA_DATAWIDTH_10 0x100 -#define MX3_CAMERA_DATAWIDTH_15 0x200 - -#define MX3_CAMERA_DATAWIDTH_MASK (MX3_CAMERA_DATAWIDTH_4 | MX3_CAMERA_DATAWIDTH_8 | \ - MX3_CAMERA_DATAWIDTH_10 | MX3_CAMERA_DATAWIDTH_15) - -struct v4l2_async_subdev; - -/** - * struct mx3_camera_pdata - i.MX3x camera platform data - * @flags: MX3_CAMERA_* flags - * @mclk_10khz: master clock frequency in 10kHz units - * @dma_dev: IPU DMA device to match against in channel allocation - */ -struct mx3_camera_pdata { - unsigned long flags; - unsigned long mclk_10khz; - struct device *dma_dev; - struct v4l2_async_subdev **asd; /* Flat array, arranged in groups */ - int *asd_sizes; /* 0-terminated array of asd group sizes */ -}; - -#endif diff --git a/include/linux/platform_data/media/camera-pxa.h b/include/linux/platform_data/media/camera-pxa.h index ce5d90e1a6e4..846a47b8c540 100644 --- a/include/linux/platform_data/media/camera-pxa.h +++ b/include/linux/platform_data/media/camera-pxa.h @@ -1,22 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* camera.h - PXA camera driver header file Copyright (C) 2003, Intel Corporation Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de> - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifndef __ASM_ARCH_CAMERA_H_ diff --git a/include/linux/platform_data/media/coda.h b/include/linux/platform_data/media/coda.h deleted file mode 100644 index 6ad4410d9e20..000000000000 --- a/include/linux/platform_data/media/coda.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Copyright (C) 2013 Philipp Zabel, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ -#ifndef PLATFORM_CODA_H -#define PLATFORM_CODA_H - -struct device; - -struct coda_platform_data { - struct device *iram_dev; -}; - -#endif diff --git a/include/linux/platform_data/media/mmp-camera.h b/include/linux/platform_data/media/mmp-camera.h index d2d3a443eedf..53adaab64f28 100644 --- a/include/linux/platform_data/media/mmp-camera.h +++ b/include/linux/platform_data/media/mmp-camera.h @@ -12,11 +12,7 @@ enum dphy3_algo { }; struct mmp_camera_platform_data { - struct platform_device *i2c_device; - int sensor_power_gpio; - int sensor_reset_gpio; enum v4l2_mbus_type bus_type; - int mclk_min; /* The minimal value of MCLK */ int mclk_src; /* which clock source the MCLK derives from */ int mclk_div; /* Clock Divider Value for MCLK */ /* diff --git a/include/linux/platform_data/media/omap1_camera.h b/include/linux/platform_data/media/omap1_camera.h deleted file mode 100644 index 819767cf04d4..000000000000 --- a/include/linux/platform_data/media/omap1_camera.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Header for V4L2 SoC Camera driver for OMAP1 Camera Interface - * - * Copyright (C) 2010, Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __MEDIA_OMAP1_CAMERA_H_ -#define __MEDIA_OMAP1_CAMERA_H_ - -#include <linux/bitops.h> - -#define OMAP1_CAMERA_IOSIZE 0x1c - -enum omap1_cam_vb_mode { - OMAP1_CAM_DMA_CONTIG = 0, - OMAP1_CAM_DMA_SG, -}; - -#define OMAP1_CAMERA_MIN_BUF_COUNT(x) ((x) == OMAP1_CAM_DMA_CONTIG ? 3 : 2) - -struct omap1_cam_platform_data { - unsigned long camexclk_khz; - unsigned long lclk_khz_max; - unsigned long flags; -}; - -#define OMAP1_CAMERA_LCLK_RISING BIT(0) -#define OMAP1_CAMERA_RST_LOW BIT(1) -#define OMAP1_CAMERA_RST_HIGH BIT(2) - -#endif /* __MEDIA_OMAP1_CAMERA_H_ */ diff --git a/include/linux/platform_data/media/omap4iss.h b/include/linux/platform_data/media/omap4iss.h deleted file mode 100644 index 2a511a8fcda7..000000000000 --- a/include/linux/platform_data/media/omap4iss.h +++ /dev/null @@ -1,66 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef ARCH_ARM_PLAT_OMAP4_ISS_H -#define ARCH_ARM_PLAT_OMAP4_ISS_H - -#include <linux/i2c.h> - -struct iss_device; - -enum iss_interface_type { - ISS_INTERFACE_CSI2A_PHY1, - ISS_INTERFACE_CSI2B_PHY2, -}; - -/** - * struct iss_csiphy_lane: CSI2 lane position and polarity - * @pos: position of the lane - * @pol: polarity of the lane - */ -struct iss_csiphy_lane { - u8 pos; - u8 pol; -}; - -#define ISS_CSIPHY1_NUM_DATA_LANES 4 -#define ISS_CSIPHY2_NUM_DATA_LANES 1 - -/** - * struct iss_csiphy_lanes_cfg - CSI2 lane configuration - * @data: Configuration of one or two data lanes - * @clk: Clock lane configuration - */ -struct iss_csiphy_lanes_cfg { - struct iss_csiphy_lane data[ISS_CSIPHY1_NUM_DATA_LANES]; - struct iss_csiphy_lane clk; -}; - -/** - * struct iss_csi2_platform_data - CSI2 interface platform data - * @crc: Enable the cyclic redundancy check - * @vpclk_div: Video port output clock control - */ -struct iss_csi2_platform_data { - unsigned crc:1; - unsigned vpclk_div:2; - struct iss_csiphy_lanes_cfg lanecfg; -}; - -struct iss_subdev_i2c_board_info { - struct i2c_board_info *board_info; - int i2c_adapter_id; -}; - -struct iss_v4l2_subdevs_group { - struct iss_subdev_i2c_board_info *subdevs; - enum iss_interface_type interface; - union { - struct iss_csi2_platform_data csi2; - } bus; /* gcc < 4.6.0 chokes on anonymous union initializers */ -}; - -struct iss_platform_data { - struct iss_v4l2_subdevs_group *subdevs; - void (*set_constraints)(struct iss_device *iss, bool enable); -}; - -#endif diff --git a/include/linux/platform_data/media/s5p_hdmi.h b/include/linux/platform_data/media/s5p_hdmi.h deleted file mode 100644 index bb9cacb0cbb0..000000000000 --- a/include/linux/platform_data/media/s5p_hdmi.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Driver header for S5P HDMI chip. - * - * Copyright (c) 2011 Samsung Electronics, Co. Ltd - * Contact: Tomasz Stanislawski <t.stanislaws@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef S5P_HDMI_H -#define S5P_HDMI_H - -struct i2c_board_info; - -/** - * @hdmiphy_bus: controller id for HDMIPHY bus - * @hdmiphy_info: template for HDMIPHY I2C device - * @mhl_bus: controller id for MHL control bus - * @mhl_info: template for MHL I2C device - * @hpd_gpio: GPIO for Hot-Plug-Detect pin - * - * NULL pointer for *_info fields indicates that - * the corresponding chip is not present - */ -struct s5p_hdmi_platform_data { - int hdmiphy_bus; - struct i2c_board_info *hdmiphy_info; - int mhl_bus; - struct i2c_board_info *mhl_info; - int hpd_gpio; -}; - -#endif /* S5P_HDMI_H */ diff --git a/include/linux/platform_data/media/si4713.h b/include/linux/platform_data/media/si4713.h index 932668ad54f7..13b3eb7a9059 100644 --- a/include/linux/platform_data/media/si4713.h +++ b/include/linux/platform_data/media/si4713.h @@ -31,7 +31,7 @@ struct si4713_platform_data { */ struct si4713_rnl { __u32 index; /* modulator index */ - __u32 frequency; /* frequency to peform rnl measurement */ + __u32 frequency; /* frequency to perform rnl measurement */ __s32 rnl; /* result of measurement in dBuV */ __u32 reserved[4]; /* drivers and apps must init this to 0 */ }; @@ -40,7 +40,7 @@ struct si4713_rnl { * This is the ioctl number to query for rnl. Users must pass a * struct si4713_rnl pointer specifying desired frequency in 'frequency' field * following driver capabilities (i.e V4L2_TUNER_CAP_LOW). - * Driver must return measured value in the same struture, filling 'rnl' field. + * Driver must return measured value in the same structure, filling 'rnl' field. */ #define SI4713_IOC_MEASURE_RNL _IOWR('V', BASE_VIDIOC_PRIVATE + 0, \ struct si4713_rnl) diff --git a/include/linux/platform_data/media/soc_camera_platform.h b/include/linux/platform_data/media/soc_camera_platform.h deleted file mode 100644 index 1e5065dab430..000000000000 --- a/include/linux/platform_data/media/soc_camera_platform.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - * Generic Platform Camera Driver Header - * - * Copyright (C) 2008 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __SOC_CAMERA_H__ -#define __SOC_CAMERA_H__ - -#include <linux/videodev2.h> -#include <media/soc_camera.h> -#include <media/v4l2-mediabus.h> - -struct device; - -struct soc_camera_platform_info { - const char *format_name; - unsigned long format_depth; - struct v4l2_mbus_framefmt format; - unsigned long mbus_param; - enum v4l2_mbus_type mbus_type; - struct soc_camera_device *icd; - int (*set_capture)(struct soc_camera_platform_info *info, int enable); -}; - -static inline void soc_camera_platform_release(struct platform_device **pdev) -{ - *pdev = NULL; -} - -static inline int soc_camera_platform_add(struct soc_camera_device *icd, - struct platform_device **pdev, - struct soc_camera_link *plink, - void (*release)(struct device *dev), - int id) -{ - struct soc_camera_subdev_desc *ssdd = - (struct soc_camera_subdev_desc *)plink; - struct soc_camera_platform_info *info = ssdd->drv_priv; - int ret; - - if (&icd->sdesc->subdev_desc != ssdd) - return -ENODEV; - - if (*pdev) - return -EBUSY; - - *pdev = platform_device_alloc("soc_camera_platform", id); - if (!*pdev) - return -ENOMEM; - - info->icd = icd; - - (*pdev)->dev.platform_data = info; - (*pdev)->dev.release = release; - - ret = platform_device_add(*pdev); - if (ret < 0) { - platform_device_put(*pdev); - *pdev = NULL; - info->icd = NULL; - } - - return ret; -} - -static inline void soc_camera_platform_del(const struct soc_camera_device *icd, - struct platform_device *pdev, - const struct soc_camera_link *plink) -{ - const struct soc_camera_subdev_desc *ssdd = - (const struct soc_camera_subdev_desc *)plink; - if (&icd->sdesc->subdev_desc != ssdd || !pdev) - return; - - platform_device_unregister(pdev); -} - -#endif /* __SOC_CAMERA_H__ */ diff --git a/include/linux/platform_data/media/timb_radio.h b/include/linux/platform_data/media/timb_radio.h index a40a6a348d21..109a0d4a4f07 100644 --- a/include/linux/platform_data/media/timb_radio.h +++ b/include/linux/platform_data/media/timb_radio.h @@ -1,19 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * timb_radio.h Platform struct for the Timberdale radio driver * Copyright (c) 2009 Intel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifndef _TIMB_RADIO_ diff --git a/include/linux/platform_data/media/timb_video.h b/include/linux/platform_data/media/timb_video.h index 70ae43970a49..38764cc09b4f 100644 --- a/include/linux/platform_data/media/timb_video.h +++ b/include/linux/platform_data/media/timb_video.h @@ -1,19 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * timb_video.h Platform struct for the Timberdale video driver * Copyright (c) 2009-2010 Intel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifndef _TIMB_VIDEO_ diff --git a/include/linux/platform_data/mfd-mcp-sa11x0.h b/include/linux/platform_data/mfd-mcp-sa11x0.h index 747cd6baf711..b589e61bbc2e 100644 --- a/include/linux/platform_data/mfd-mcp-sa11x0.h +++ b/include/linux/platform_data/mfd-mcp-sa11x0.h @@ -1,9 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2005 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __MFD_MCP_SA11X0_H #define __MFD_MCP_SA11X0_H diff --git a/include/linux/platform_data/microchip-ksz.h b/include/linux/platform_data/microchip-ksz.h index 84789ca634aa..028781ad4059 100644 --- a/include/linux/platform_data/microchip-ksz.h +++ b/include/linux/platform_data/microchip-ksz.h @@ -19,11 +19,37 @@ #ifndef __MICROCHIP_KSZ_H #define __MICROCHIP_KSZ_H -#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/platform_data/dsa.h> + +enum ksz_chip_id { + KSZ8463_CHIP_ID = 0x8463, + KSZ8563_CHIP_ID = 0x8563, + KSZ8795_CHIP_ID = 0x8795, + KSZ8794_CHIP_ID = 0x8794, + KSZ8765_CHIP_ID = 0x8765, + KSZ88X3_CHIP_ID = 0x8830, + KSZ8864_CHIP_ID = 0x8864, + KSZ8895_CHIP_ID = 0x8895, + KSZ9477_CHIP_ID = 0x00947700, + KSZ9896_CHIP_ID = 0x00989600, + KSZ9897_CHIP_ID = 0x00989700, + KSZ9893_CHIP_ID = 0x00989300, + KSZ9563_CHIP_ID = 0x00956300, + KSZ8567_CHIP_ID = 0x00856700, + KSZ9567_CHIP_ID = 0x00956700, + LAN9370_CHIP_ID = 0x00937000, + LAN9371_CHIP_ID = 0x00937100, + LAN9372_CHIP_ID = 0x00937200, + LAN9373_CHIP_ID = 0x00937300, + LAN9374_CHIP_ID = 0x00937400, + LAN9646_CHIP_ID = 0x00964600, +}; struct ksz_platform_data { + /* Must be first such that dsa_register_switch() can access it */ + struct dsa_chip_data cd; u32 chip_id; - u16 enabled_ports; }; #endif diff --git a/include/linux/platform_data/mlxcpld.h b/include/linux/platform_data/mlxcpld.h new file mode 100644 index 000000000000..d7610b528856 --- /dev/null +++ b/include/linux/platform_data/mlxcpld.h @@ -0,0 +1,31 @@ +/* SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 */ +/* + * Mellanox I2C multiplexer support in CPLD + * + * Copyright (C) 2016-2020 Mellanox Technologies + */ + +#ifndef _LINUX_I2C_MLXCPLD_H +#define _LINUX_I2C_MLXCPLD_H + +/* Platform data for the CPLD I2C multiplexers */ + +/* mlxcpld_mux_plat_data - per mux data, used with i2c_register_board_info + * @chan_ids - channels array + * @num_adaps - number of adapters + * @sel_reg_addr - mux select register offset in CPLD space + * @reg_size: register size in bytes + * @handle: handle to be passed by callback + * @completion_notify: callback to notify when all the adapters are created + */ +struct mlxcpld_mux_plat_data { + int *chan_ids; + int num_adaps; + int sel_reg_addr; + u8 reg_size; + void *handle; + int (*completion_notify)(void *handle, struct i2c_adapter *parent, + struct i2c_adapter *adapters[]); +}; + +#endif /* _LINUX_I2C_MLXCPLD_H */ diff --git a/include/linux/platform_data/mlxreg.h b/include/linux/platform_data/mlxreg.h index 19f5cb618c55..f6cca7a035c7 100644 --- a/include/linux/platform_data/mlxreg.h +++ b/include/linux/platform_data/mlxreg.h @@ -1,40 +1,86 @@ +/* SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 */ /* - * Copyright (c) 2017 Mellanox Technologies. All rights reserved. - * Copyright (c) 2017 Vadim Pasternak <vadimp@mellanox.com> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the names of the copyright holders nor the names of its - * contributors may be used to endorse or promote products derived from - * this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. + * Copyright (C) 2017-2020 Mellanox Technologies Ltd. */ #ifndef __LINUX_PLATFORM_DATA_MLXREG_H #define __LINUX_PLATFORM_DATA_MLXREG_H #define MLXREG_CORE_LABEL_MAX_SIZE 32 +#define MLXREG_CORE_WD_FEATURE_NOWAYOUT BIT(0) +#define MLXREG_CORE_WD_FEATURE_START_AT_BOOT BIT(1) + +/** + * enum mlxreg_wdt_type - type of HW watchdog + * + * TYPE1 HW watchdog implementation exist in old systems. + * All new systems have TYPE2 HW watchdog. + * TYPE3 HW watchdog can exist on all systems with new CPLD. + * TYPE3 is selected by WD capability bit. + */ +enum mlxreg_wdt_type { + MLX_WDT_TYPE1, + MLX_WDT_TYPE2, + MLX_WDT_TYPE3, +}; + +/** + * enum mlxreg_hotplug_kind - kind of hotplug entry + * + * @MLXREG_HOTPLUG_DEVICE_NA: do not care; + * @MLXREG_HOTPLUG_LC_PRESENT: entry for line card presence in/out events; + * @MLXREG_HOTPLUG_LC_VERIFIED: entry for line card verification status events + * coming after line card security signature validation; + * @MLXREG_HOTPLUG_LC_POWERED: entry for line card power on/off events; + * @MLXREG_HOTPLUG_LC_SYNCED: entry for line card synchronization events, coming + * after hardware-firmware synchronization handshake; + * @MLXREG_HOTPLUG_LC_READY: entry for line card ready events, indicating line card + PHYs ready / unready state; + * @MLXREG_HOTPLUG_LC_ACTIVE: entry for line card active events, indicating firmware + * availability / unavailability for the ports on line card; + * @MLXREG_HOTPLUG_LC_THERMAL: entry for line card thermal shutdown events, positive + * event indicates that system should power off the line + * card for which this event has been received; + */ +enum mlxreg_hotplug_kind { + MLXREG_HOTPLUG_DEVICE_NA = 0, + MLXREG_HOTPLUG_LC_PRESENT = 1, + MLXREG_HOTPLUG_LC_VERIFIED = 2, + MLXREG_HOTPLUG_LC_POWERED = 3, + MLXREG_HOTPLUG_LC_SYNCED = 4, + MLXREG_HOTPLUG_LC_READY = 5, + MLXREG_HOTPLUG_LC_ACTIVE = 6, + MLXREG_HOTPLUG_LC_THERMAL = 7, +}; + +/** + * enum mlxreg_hotplug_device_action - hotplug device action required for + * driver's connectivity + * + * @MLXREG_HOTPLUG_DEVICE_DEFAULT_ACTION: probe device for 'on' event, remove + * for 'off' event; + * @MLXREG_HOTPLUG_DEVICE_PLATFORM_ACTION: probe platform device for 'on' + * event, remove for 'off' event; + * @MLXREG_HOTPLUG_DEVICE_NO_ACTION: no connectivity action is required; + */ +enum mlxreg_hotplug_device_action { + MLXREG_HOTPLUG_DEVICE_DEFAULT_ACTION = 0, + MLXREG_HOTPLUG_DEVICE_PLATFORM_ACTION = 1, + MLXREG_HOTPLUG_DEVICE_NO_ACTION = 2, +}; + +/** + * struct mlxreg_core_hotplug_notifier - hotplug notifier block: + * + * @identity: notifier identity name; + * @handle: user handle to be passed by user handler function; + * @user_handler: user handler function associated with the event; + */ +struct mlxreg_core_hotplug_notifier { + char identity[MLXREG_CORE_LABEL_MAX_SIZE]; + void *handle; + int (*user_handler)(void *handle, enum mlxreg_hotplug_kind kind, u8 action); +}; /** * struct mlxreg_hotplug_device - I2C device data: @@ -43,6 +89,11 @@ * @client: I2C device client; * @brdinfo: device board information; * @nr: I2C device adapter number, to which device is to be attached; + * @pdev: platform device, if device is instantiated as a platform device; + * @action: action to be performed upon event receiving; + * @handle: user handle to be passed by user handler function; + * @user_handler: user handler function associated with the event; + * @notifier: pointer to event notifier block; * * Structure represents I2C hotplug device static data (board topology) and * dynamic data (related kernel objects handles). @@ -52,6 +103,11 @@ struct mlxreg_hotplug_device { struct i2c_client *client; struct i2c_board_info *brdinfo; int nr; + struct platform_device *pdev; + enum mlxreg_hotplug_device_action action; + void *handle; + int (*user_handler)(void *handle, enum mlxreg_hotplug_kind kind, u8 action); + struct mlxreg_core_hotplug_notifier *notifier; }; /** @@ -61,31 +117,51 @@ struct mlxreg_hotplug_device { * @reg: attribute register; * @mask: attribute access mask; * @bit: attribute effective bit; + * @capability: attribute capability register; + * @reg_prsnt: attribute presence register; + * @reg_sync: attribute synch register; + * @reg_pwr: attribute power register; + * @reg_ena: attribute enable register; * @mode: access mode; * @np - pointer to node platform associated with attribute; * @hpdev - hotplug device data; + * @notifier: pointer to event notifier block; * @health_cntr: dynamic device health indication counter; * @attached: true if device has been attached after good health indication; + * @regnum: number of registers occupied by multi-register attribute; + * @slot: slot number, at which device is located; + * @secured: if set indicates that entry access is secured; */ struct mlxreg_core_data { char label[MLXREG_CORE_LABEL_MAX_SIZE]; u32 reg; u32 mask; u32 bit; + u32 capability; + u32 reg_prsnt; + u32 reg_sync; + u32 reg_pwr; + u32 reg_ena; umode_t mode; struct device_node *np; struct mlxreg_hotplug_device hpdev; - u8 health_cntr; + struct mlxreg_core_hotplug_notifier *notifier; + u32 health_cntr; bool attached; + u8 regnum; + u8 slot; + u8 secured; }; /** * struct mlxreg_core_item - same type components controlled by the driver: * * @data: component data; + * @kind: kind of hotplug attribute; * @aggr_mask: group aggregation mask; * @reg: group interrupt status register; * @mask: group interrupt mask; + * @capability: group capability register; * @cache: last status value for elements fro the same group; * @count: number of available elements in the group; * @ind: element's index inside the group; @@ -94,9 +170,11 @@ struct mlxreg_core_data { */ struct mlxreg_core_item { struct mlxreg_core_data *data; + enum mlxreg_hotplug_kind kind; u32 aggr_mask; u32 reg; u32 mask; + u32 capability; u32 cache; u8 count; u8 ind; @@ -107,14 +185,22 @@ struct mlxreg_core_item { /** * struct mlxreg_core_platform_data - platform data: * - * @led_data: led private data; + * @data: instance private data; * @regmap: register map of parent device; - * @counter: number of led instances; + * @counter: number of instances; + * @features: supported features of device; + * @version: implementation version; + * @identity: device identity name; + * @capability: device capability register; */ struct mlxreg_core_platform_data { struct mlxreg_core_data *data; void *regmap; int counter; + u32 features; + u32 version; + char identity[MLXREG_CORE_LABEL_MAX_SIZE]; + u32 capability; }; /** @@ -123,25 +209,31 @@ struct mlxreg_core_platform_data { * @items: same type components with the hotplug capability; * @irq: platform interrupt number; * @regmap: register map of parent device; - * @counter: number of the components with the hotplug capability; + * @count: number of the components with the hotplug capability; * @cell: location of top aggregation interrupt register; * @mask: top aggregation interrupt common mask; * @cell_low: location of low aggregation interrupt register; * @mask_low: low aggregation interrupt common mask; * @deferred_nr: I2C adapter number must be exist prior probing execution; * @shift_nr: I2C adapter numbers must be incremented by this value; + * @addr: mapped resource address; + * @handle: handle to be passed by callback; + * @completion_notify: callback to notify when platform driver probing is done; */ struct mlxreg_core_hotplug_platform_data { struct mlxreg_core_item *items; int irq; void *regmap; - int counter; + int count; u32 cell; u32 mask; u32 cell_low; u32 mask_low; int deferred_nr; int shift_nr; + void __iomem *addr; + void *handle; + int (*completion_notify)(void *handle, int id); }; #endif /* __LINUX_PLATFORM_DATA_MLXREG_H */ diff --git a/include/linux/platform_data/mmc-esdhc-imx.h b/include/linux/platform_data/mmc-esdhc-imx.h deleted file mode 100644 index b606ca4197df..000000000000 --- a/include/linux/platform_data/mmc-esdhc-imx.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * Copyright 2010 Wolfram Sang <w.sang@pengutronix.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; version 2 - * of the License. - */ - -#ifndef __ASM_ARCH_IMX_ESDHC_H -#define __ASM_ARCH_IMX_ESDHC_H - -#include <linux/types.h> - -enum wp_types { - ESDHC_WP_NONE, /* no WP, neither controller nor gpio */ - ESDHC_WP_CONTROLLER, /* mmc controller internal WP */ - ESDHC_WP_GPIO, /* external gpio pin for WP */ -}; - -enum cd_types { - ESDHC_CD_NONE, /* no CD, neither controller nor gpio */ - ESDHC_CD_CONTROLLER, /* mmc controller internal CD */ - ESDHC_CD_GPIO, /* external gpio pin for CD */ - ESDHC_CD_PERMANENT, /* no CD, card permanently wired to host */ -}; - -/** - * struct esdhc_platform_data - platform data for esdhc on i.MX - * - * ESDHC_WP(CD)_CONTROLLER type is not available on i.MX25/35. - * - * @wp_type: type of write_protect method (see wp_types enum above) - * @cd_type: type of card_detect method (see cd_types enum above) - */ - -struct esdhc_platform_data { - enum wp_types wp_type; - enum cd_types cd_type; - int max_bus_width; - unsigned int delay_line; - unsigned int tuning_step; /* The delay cell steps in tuning procedure */ - unsigned int tuning_start_tap; /* The start delay cell point in tuning procedure */ -}; -#endif /* __ASM_ARCH_IMX_ESDHC_H */ diff --git a/include/linux/platform_data/mmc-esdhc-mcf.h b/include/linux/platform_data/mmc-esdhc-mcf.h new file mode 100644 index 000000000000..85cb786a62fe --- /dev/null +++ b/include/linux/platform_data/mmc-esdhc-mcf.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef __LINUX_PLATFORM_DATA_MCF_ESDHC_H__ +#define __LINUX_PLATFORM_DATA_MCF_ESDHC_H__ + +enum cd_types { + ESDHC_CD_NONE, /* no CD, neither controller nor gpio */ + ESDHC_CD_CONTROLLER, /* mmc controller internal CD */ + ESDHC_CD_PERMANENT, /* no CD, card permanently wired to host */ +}; + +struct mcf_esdhc_platform_data { + int max_bus_width; + int cd_type; +}; + +#endif /* __LINUX_PLATFORM_DATA_MCF_ESDHC_H__ */ diff --git a/include/linux/platform_data/mmc-omap.h b/include/linux/platform_data/mmc-omap.h index 929469291406..054d0c3c5ec5 100644 --- a/include/linux/platform_data/mmc-omap.h +++ b/include/linux/platform_data/mmc-omap.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * MMC definitions for OMAP2 * * Copyright (C) 2006 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #define OMAP_MMC_MAX_SLOTS 2 @@ -23,8 +20,6 @@ struct omap_mmc_platform_data { * maximum frequency on the MMC bus */ unsigned int max_freq; - /* switch the bus to a new slot */ - int (*switch_slot)(struct device *dev, int slot); /* initialize board-specific MMC functionality, can be NULL if * not supported */ int (*init)(struct device *dev); @@ -111,11 +106,13 @@ struct omap_mmc_platform_data { const char *name; u32 ocr_mask; - /* Card detection IRQs */ - int card_detect_irq; + /* Card detection */ int (*card_detect)(struct device *dev, int slot); unsigned int ban_openended:1; } slots[OMAP_MMC_MAX_SLOTS]; }; + +extern void omap_mmc_notify_cover_event(struct device *dev, int slot, + int is_closed); diff --git a/include/linux/platform_data/mmc-pxamci.h b/include/linux/platform_data/mmc-pxamci.h index 7e44e84e7150..652f323b5ecc 100644 --- a/include/linux/platform_data/mmc-pxamci.h +++ b/include/linux/platform_data/mmc-pxamci.h @@ -7,6 +7,7 @@ struct device; struct mmc_host; +struct property_entry; struct pxamci_platform_data { unsigned int ocr_mask; /* available voltages */ @@ -18,7 +19,8 @@ struct pxamci_platform_data { bool gpio_card_ro_invert; /* gpio ro is inverted */ }; -extern void pxa_set_mci_info(struct pxamci_platform_data *info); +extern void pxa_set_mci_info(const struct pxamci_platform_data *info, + const struct property_entry *props); extern void pxa3xx_set_mci2_info(struct pxamci_platform_data *info); extern void pxa3xx_set_mci3_info(struct pxamci_platform_data *info); diff --git a/include/linux/platform_data/mmc-s3cmci.h b/include/linux/platform_data/mmc-s3cmci.h deleted file mode 100644 index 33310b11cbdd..000000000000 --- a/include/linux/platform_data/mmc-s3cmci.h +++ /dev/null @@ -1,49 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ARCH_MCI_H -#define _ARCH_MCI_H - -/** - * struct s3c24xx_mci_pdata - sd/mmc controller platform data - * @no_wprotect: Set this to indicate there is no write-protect switch. - * @no_detect: Set this if there is no detect switch. - * @wprotect_invert: Invert the default sense of the write protect switch. - * @use_dma: Set to allow the use of DMA. - * @gpio_detect: GPIO number for the card detect line. - * @gpio_wprotect: GPIO number for the write protect line. - * @ocr_avail: The mask of the available power states, non-zero to use. - * @set_power: Callback to control the power mode. - * - * The @gpio_detect is used for card detection when @no_wprotect is unset, - * and the default sense is that 0 returned from gpio_get_value() means - * that a card is inserted. If @detect_invert is set, then the value from - * gpio_get_value() is inverted, which makes 1 mean card inserted. - * - * The driver will use @gpio_wprotect to signal whether the card is write - * protected if @no_wprotect is not set. A 0 returned from gpio_get_value() - * means the card is read/write, and 1 means read-only. The @wprotect_invert - * will invert the value returned from gpio_get_value(). - * - * Card power is set by @ocr_availa, using MCC_VDD_ constants if it is set - * to a non-zero value, otherwise the default of 3.2-3.4V is used. - */ -struct s3c24xx_mci_pdata { - unsigned int no_wprotect:1; - unsigned int no_detect:1; - unsigned int wprotect_invert:1; - unsigned int use_dma:1; - - unsigned long ocr_avail; - void (*set_power)(unsigned char power_mode, - unsigned short vdd); -}; - -/** - * s3c24xx_mci_set_platdata - set platform data for mmc/sdi device - * @pdata: The platform data - * - * Copy the platform data supplied by @pdata so that this can be marked - * __initdata. - */ -extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata); - -#endif /* _ARCH_NCI_H */ diff --git a/include/linux/platform_data/mmp_audio.h b/include/linux/platform_data/mmp_audio.h deleted file mode 100644 index 0f25d165abd6..000000000000 --- a/include/linux/platform_data/mmp_audio.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * MMP Platform AUDIO Management - * - * Copyright (c) 2011 Marvell Semiconductors Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#ifndef MMP_AUDIO_H -#define MMP_AUDIO_H - -struct mmp_audio_platdata { - u32 period_max_capture; - u32 buffer_max_capture; - u32 period_max_playback; - u32 buffer_max_playback; -}; - -#endif /* MMP_AUDIO_H */ diff --git a/include/linux/platform_data/mmp_dma.h b/include/linux/platform_data/mmp_dma.h index 6397b9c8149a..030241cb9cc1 100644 --- a/include/linux/platform_data/mmp_dma.h +++ b/include/linux/platform_data/mmp_dma.h @@ -1,12 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * MMP Platform DMA Management * * Copyright (c) 2011 Marvell Semiconductors Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef MMP_DMA_H diff --git a/include/linux/platform_data/mouse-pxa930_trkball.h b/include/linux/platform_data/mouse-pxa930_trkball.h deleted file mode 100644 index ba0ac7a30d8c..000000000000 --- a/include/linux/platform_data/mouse-pxa930_trkball.h +++ /dev/null @@ -1,11 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_ARCH_PXA930_TRKBALL_H -#define __ASM_ARCH_PXA930_TRKBALL_H - -struct pxa930_trkball_platform_data { - int x_filter; - int y_filter; -}; - -#endif /* __ASM_ARCH_PXA930_TRKBALL_H */ - diff --git a/include/linux/platform_data/mtd-davinci-aemif.h b/include/linux/platform_data/mtd-davinci-aemif.h deleted file mode 100644 index a403dd51dacc..000000000000 --- a/include/linux/platform_data/mtd-davinci-aemif.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * TI DaVinci AEMIF support - * - * Copyright 2010 (C) Texas Instruments, Inc. http://www.ti.com/ - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ -#ifndef _MACH_DAVINCI_AEMIF_H -#define _MACH_DAVINCI_AEMIF_H - -#include <linux/platform_device.h> - -#define NRCSR_OFFSET 0x00 -#define AWCCR_OFFSET 0x04 -#define A1CR_OFFSET 0x10 - -#define ACR_ASIZE_MASK 0x3 -#define ACR_EW_MASK BIT(30) -#define ACR_SS_MASK BIT(31) - -/* All timings in nanoseconds */ -struct davinci_aemif_timing { - u8 wsetup; - u8 wstrobe; - u8 whold; - - u8 rsetup; - u8 rstrobe; - u8 rhold; - - u8 ta; -}; - -#endif diff --git a/include/linux/platform_data/mtd-davinci.h b/include/linux/platform_data/mtd-davinci.h deleted file mode 100644 index 1bbfa27cccb4..000000000000 --- a/include/linux/platform_data/mtd-davinci.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - * mach-davinci/nand.h - * - * Copyright © 2006 Texas Instruments. - * - * Ported to 2.6.23 Copyright © 2008 by - * Sander Huijsen <Shuijsen@optelecom-nkf.com> - * Troy Kisky <troy.kisky@boundarydevices.com> - * Dirk Behme <Dirk.Behme@gmail.com> - * - * -------------------------------------------------------------------------- - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ARCH_ARM_DAVINCI_NAND_H -#define __ARCH_ARM_DAVINCI_NAND_H - -#include <linux/mtd/rawnand.h> - -#define NANDFCR_OFFSET 0x60 -#define NANDFSR_OFFSET 0x64 -#define NANDF1ECC_OFFSET 0x70 - -/* 4-bit ECC syndrome registers */ -#define NAND_4BIT_ECC_LOAD_OFFSET 0xbc -#define NAND_4BIT_ECC1_OFFSET 0xc0 -#define NAND_4BIT_ECC2_OFFSET 0xc4 -#define NAND_4BIT_ECC3_OFFSET 0xc8 -#define NAND_4BIT_ECC4_OFFSET 0xcc -#define NAND_ERR_ADD1_OFFSET 0xd0 -#define NAND_ERR_ADD2_OFFSET 0xd4 -#define NAND_ERR_ERRVAL1_OFFSET 0xd8 -#define NAND_ERR_ERRVAL2_OFFSET 0xdc - -/* NOTE: boards don't need to use these address bits - * for ALE/CLE unless they support booting from NAND. - * They're used unless platform data overrides them. - */ -#define MASK_ALE 0x08 -#define MASK_CLE 0x10 - -struct davinci_nand_pdata { /* platform_data */ - uint32_t mask_ale; - uint32_t mask_cle; - - /* - * 0-indexed chip-select number of the asynchronous - * interface to which the NAND device has been connected. - * - * So, if you have NAND connected to CS3 of DA850, you - * will pass '1' here. Since the asynchronous interface - * on DA850 starts from CS2. - */ - uint32_t core_chipsel; - - /* for packages using two chipselects */ - uint32_t mask_chipsel; - - /* board's default static partition info */ - struct mtd_partition *parts; - unsigned nr_parts; - - /* none == NAND_ECC_NONE (strongly *not* advised!!) - * soft == NAND_ECC_SOFT - * else == NAND_ECC_HW, according to ecc_bits - * - * All DaVinci-family chips support 1-bit hardware ECC. - * Newer ones also support 4-bit ECC, but are awkward - * using it with large page chips. - */ - nand_ecc_modes_t ecc_mode; - u8 ecc_bits; - - /* e.g. NAND_BUSWIDTH_16 */ - unsigned options; - /* e.g. NAND_BBT_USE_FLASH */ - unsigned bbt_options; - - /* Main and mirror bbt descriptor overrides */ - struct nand_bbt_descr *bbt_td; - struct nand_bbt_descr *bbt_md; - - /* Access timings */ - struct davinci_aemif_timing *timing; -}; - -#endif /* __ARCH_ARM_DAVINCI_NAND_H */ diff --git a/include/linux/platform_data/mtd-mxc_nand.h b/include/linux/platform_data/mtd-mxc_nand.h deleted file mode 100644 index 6bb96ef1600b..000000000000 --- a/include/linux/platform_data/mtd-mxc_nand.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Sascha Hauer, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_NAND_H -#define __ASM_ARCH_NAND_H - -#include <linux/mtd/partitions.h> - -struct mxc_nand_platform_data { - unsigned int width; /* data bus width in bytes */ - unsigned int hw_ecc:1; /* 0 if suppress hardware ECC */ - unsigned int flash_bbt:1; /* set to 1 to use a flash based bbt */ - struct mtd_partition *parts; /* partition table */ - int nr_parts; /* size of parts */ -}; -#endif /* __ASM_ARCH_NAND_H */ diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h index 619df2431e75..8c2f1f185353 100644 --- a/include/linux/platform_data/mtd-nand-omap2.h +++ b/include/linux/platform_data/mtd-nand-omap2.h @@ -1,15 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2006 Micron Technology Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _MTD_NAND_OMAP2_H #define _MTD_NAND_OMAP2_H #include <linux/mtd/partitions.h> +#include <linux/mod_devicetable.h> #define GPMC_BCH_NUM_REMAINDER 8 @@ -64,4 +62,11 @@ struct gpmc_nand_regs { void __iomem *gpmc_bch_result5[GPMC_BCH_NUM_REMAINDER]; void __iomem *gpmc_bch_result6[GPMC_BCH_NUM_REMAINDER]; }; -#endif + +static const struct of_device_id omap_nand_ids[] = { + { .compatible = "ti,omap2-nand", }, + { .compatible = "ti,am64-nand", }, + {}, +}; + +#endif /* _MTD_NAND_OMAP2_H */ diff --git a/include/linux/platform_data/mtd-nand-s3c2410.h b/include/linux/platform_data/mtd-nand-s3c2410.h deleted file mode 100644 index f8c553f92655..000000000000 --- a/include/linux/platform_data/mtd-nand-s3c2410.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * Copyright (c) 2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 - NAND device controller platform_device info - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __MTD_NAND_S3C2410_H -#define __MTD_NAND_S3C2410_H - -#include <linux/mtd/rawnand.h> - -/** - * struct s3c2410_nand_set - define a set of one or more nand chips - * @flash_bbt: Openmoko u-boot can create a Bad Block Table - * Setting this flag will allow the kernel to - * look for it at boot time and also skip the NAND - * scan. - * @options: Default value to set into 'struct nand_chip' options. - * @nr_chips: Number of chips in this set - * @nr_partitions: Number of partitions pointed to by @partitions - * @name: Name of set (optional) - * @nr_map: Map for low-layer logical to physical chip numbers (option) - * @partitions: The mtd partition list - * - * define a set of one or more nand chips registered with an unique mtd. Also - * allows to pass flag to the underlying NAND layer. 'disable_ecc' will trigger - * a warning at boot time. - */ -struct s3c2410_nand_set { - unsigned int flash_bbt:1; - - unsigned int options; - int nr_chips; - int nr_partitions; - char *name; - int *nr_map; - struct mtd_partition *partitions; - struct device_node *of_node; -}; - -struct s3c2410_platform_nand { - /* timing information for controller, all times in nanoseconds */ - - int tacls; /* time for active CLE/ALE to nWE/nOE */ - int twrph0; /* active time for nWE/nOE */ - int twrph1; /* time for release CLE/ALE from nWE/nOE inactive */ - - unsigned int ignore_unset_ecc:1; - - nand_ecc_modes_t ecc_mode; - - int nr_sets; - struct s3c2410_nand_set *sets; - - void (*select_chip)(struct s3c2410_nand_set *, - int chip); -}; - -/** - * s3c_nand_set_platdata() - register NAND platform data. - * @nand: The NAND platform data to register with s3c_device_nand. - * - * This function copies the given NAND platform data, @nand and registers - * it with the s3c_device_nand. This allows @nand to be __initdata. -*/ -extern void s3c_nand_set_platdata(struct s3c2410_platform_nand *nand); - -#endif /*__MTD_NAND_S3C2410_H */ diff --git a/include/linux/platform_data/mv88e6xxx.h b/include/linux/platform_data/mv88e6xxx.h index 963730b44aea..21452a9365e1 100644 --- a/include/linux/platform_data/mv88e6xxx.h +++ b/include/linux/platform_data/mv88e6xxx.h @@ -13,6 +13,7 @@ struct dsa_mv88e6xxx_pdata { unsigned int enabled_ports; struct net_device *netdev; u32 eeprom_len; + int irq; }; #endif diff --git a/include/linux/platform_data/mv_usb.h b/include/linux/platform_data/mv_usb.h index c0f624aca81c..20d239c02bf3 100644 --- a/include/linux/platform_data/mv_usb.h +++ b/include/linux/platform_data/mv_usb.h @@ -1,23 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright (C) 2011 Marvell International Ltd. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. */ #ifndef __MV_PLATFORM_USB_H #define __MV_PLATFORM_USB_H -enum pxa_ehci_type { - EHCI_UNDEFINED = 0, - PXA_U2OEHCI, /* pxa 168, 9xx */ - PXA_SPH, /* pxa 168, 9xx SPH */ - MMP3_HSIC, /* mmp3 hsic */ - MMP3_FSIC, /* mmp3 fsic */ -}; - enum { MV_USB_MODE_OTG, MV_USB_MODE_HOST, diff --git a/include/linux/platform_data/net-cw1200.h b/include/linux/platform_data/net-cw1200.h index c6fbc3ce4ab0..89d0ec6f7d46 100644 --- a/include/linux/platform_data/net-cw1200.h +++ b/include/linux/platform_data/net-cw1200.h @@ -1,8 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) ST-Ericsson SA 2011 * * Author: Dmitry Tarnyagin <dmitry.tarnyagin@stericsson.com> - * License terms: GNU General Public License (GPL) version 2 */ #ifndef CW1200_PLAT_H_INCLUDED @@ -14,8 +14,6 @@ struct cw1200_platform_data_spi { /* All others are optional */ bool have_5ghz; - int reset; /* GPIO to RSTn signal (0 disables) */ - int powerup; /* GPIO to POWERUP signal (0 disables) */ int (*power_ctrl)(const struct cw1200_platform_data_spi *pdata, bool enable); /* Control 3v3 / 1v8 supply */ int (*clk_ctrl)(const struct cw1200_platform_data_spi *pdata, @@ -30,8 +28,6 @@ struct cw1200_platform_data_sdio { /* All others are optional */ bool have_5ghz; bool no_nptb; /* SDIO hardware does not support non-power-of-2-blocksizes */ - int reset; /* GPIO to RSTn signal (0 disables) */ - int powerup; /* GPIO to POWERUP signal (0 disables) */ int irq; /* IRQ line or 0 to use SDIO IRQ */ int (*power_ctrl)(const struct cw1200_platform_data_sdio *pdata, bool enable); /* Control 3v3 / 1v8 supply */ diff --git a/include/linux/platform_data/nfcmrvl.h b/include/linux/platform_data/nfcmrvl.h deleted file mode 100644 index 9e75ac8d19be..000000000000 --- a/include/linux/platform_data/nfcmrvl.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Copyright (C) 2015, Marvell International Ltd. - * - * This software file (the "File") is distributed by Marvell International - * Ltd. under the terms of the GNU General Public License Version 2, June 1991 - * (the "License"). You may use, redistribute and/or modify this File in - * accordance with the terms and conditions of the License, a copy of which - * is available on the worldwide web at - * http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. - * - * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE - * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE - * ARE EXPRESSLY DISCLAIMED. The License provides additional details about - * this warranty disclaimer. - */ - -#ifndef _NFCMRVL_PTF_H_ -#define _NFCMRVL_PTF_H_ - -struct nfcmrvl_platform_data { - /* - * Generic - */ - - /* GPIO that is wired to RESET_N signal */ - int reset_n_io; - /* Tell if transport is muxed in HCI one */ - unsigned int hci_muxed; - - /* - * UART specific - */ - - /* Tell if UART needs flow control at init */ - unsigned int flow_control; - /* Tell if firmware supports break control for power management */ - unsigned int break_control; - - - /* - * I2C specific - */ - - unsigned int irq; - unsigned int irq_polarity; -}; - -#endif /* _NFCMRVL_PTF_H_ */ diff --git a/include/linux/platform_data/ntc_thermistor.h b/include/linux/platform_data/ntc_thermistor.h deleted file mode 100644 index ee03d429742b..000000000000 --- a/include/linux/platform_data/ntc_thermistor.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * ntc_thermistor.h - NTC Thermistors - * - * Copyright (C) 2010 Samsung Electronics - * MyungJoo Ham <myungjoo.ham@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef _LINUX_NTC_H -#define _LINUX_NTC_H - -struct iio_channel; - -enum ntc_thermistor_type { - TYPE_B57330V2103, - TYPE_B57891S0103, - TYPE_NCPXXWB473, - TYPE_NCPXXWF104, - TYPE_NCPXXWL333, - TYPE_NCPXXXH103, -}; - -struct ntc_thermistor_platform_data { - /* - * One (not both) of read_uV and read_ohm should be provided and only - * one of the two should be provided. - * Both functions should return negative value for an error case. - * - * pullup_uV, pullup_ohm, pulldown_ohm, and connect are required to use - * read_uV() - * - * How to setup pullup_ohm, pulldown_ohm, and connect is - * described at Documentation/hwmon/ntc_thermistor - * - * pullup/down_ohm: 0 for infinite / not-connected - * - * chan: iio_channel pointer to communicate with the ADC which the - * thermistor is using for conversion of the analog values. - */ - int (*read_uv)(struct ntc_thermistor_platform_data *); - unsigned int pullup_uv; - - unsigned int pullup_ohm; - unsigned int pulldown_ohm; - enum { NTC_CONNECTED_POSITIVE, NTC_CONNECTED_GROUND } connect; - struct iio_channel *chan; - - int (*read_ohm)(void); -}; - -#endif /* _LINUX_NTC_H */ diff --git a/include/linux/platform_data/nxp-nci.h b/include/linux/platform_data/nxp-nci.h deleted file mode 100644 index d6ed28679bb2..000000000000 --- a/include/linux/platform_data/nxp-nci.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Generic platform data for the NXP NCI NFC chips. - * - * Copyright (C) 2014 NXP Semiconductors All rights reserved. - * - * Authors: Clément Perrochaud <clement.perrochaud@nxp.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef _NXP_NCI_H_ -#define _NXP_NCI_H_ - -struct nxp_nci_nfc_platform_data { - unsigned int gpio_en; - unsigned int gpio_fw; - unsigned int irq; -}; - -#endif /* _NXP_NCI_H_ */ diff --git a/include/linux/platform_data/omap-twl4030.h b/include/linux/platform_data/omap-twl4030.h index ee60ef79d792..7fcb55fe21c9 100644 --- a/include/linux/platform_data/omap-twl4030.h +++ b/include/linux/platform_data/omap-twl4030.h @@ -1,25 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /** * omap-twl4030.h - ASoC machine driver for TI SoC based boards with twl4030 * codec, header. * - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com * All rights reserved. * * Author: Peter Ujfalusi <peter.ujfalusi@ti.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA */ #ifndef _OMAP_TWL4030_H_ @@ -50,9 +37,6 @@ struct omap_tw4030_pdata { bool has_digimic0; bool has_digimic1; u8 has_linein; - - /* Jack detect GPIO or <= 0 if it is not implemented */ - int jack_detect; }; #endif /* _OMAP_TWL4030_H_ */ diff --git a/include/linux/platform_data/omap-wd-timer.h b/include/linux/platform_data/omap-wd-timer.h index d75f5f802d98..f2788ec984e9 100644 --- a/include/linux/platform_data/omap-wd-timer.h +++ b/include/linux/platform_data/omap-wd-timer.h @@ -1,13 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * OMAP2+ WDTIMER-specific function prototypes * * Copyright (C) 2012 Texas Instruments, Inc. * Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ #ifndef __LINUX_PLATFORM_DATA_OMAP_WD_TIMER_H diff --git a/include/linux/platform_data/omap1_bl.h b/include/linux/platform_data/omap1_bl.h index 5e8b17d77a5f..3d0bab31a0a9 100644 --- a/include/linux/platform_data/omap1_bl.h +++ b/include/linux/platform_data/omap1_bl.h @@ -6,7 +6,6 @@ struct omap_backlight_config { int default_intensity; - int (*set_power)(struct device *dev, int state); }; #endif diff --git a/include/linux/platform_data/omapdss.h b/include/linux/platform_data/omapdss.h index 7feb011ed500..a377090d90e8 100644 --- a/include/linux/platform_data/omapdss.h +++ b/include/linux/platform_data/omapdss.h @@ -1,10 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright (C) 2016 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ #ifndef __OMAPDSS_PDATA_H diff --git a/include/linux/platform_data/pca953x.h b/include/linux/platform_data/pca953x.h index 4eb53e023997..3c3787c4d96c 100644 --- a/include/linux/platform_data/pca953x.h +++ b/include/linux/platform_data/pca953x.h @@ -11,21 +11,8 @@ struct pca953x_platform_data { /* number of the first GPIO */ unsigned gpio_base; - /* initial polarity inversion setting */ - u32 invert; - /* interrupt base */ int irq_base; - - void *context; /* param to setup/teardown */ - - int (*setup)(struct i2c_client *client, - unsigned gpio, unsigned ngpio, - void *context); - int (*teardown)(struct i2c_client *client, - unsigned gpio, unsigned ngpio, - void *context); - const char *const *names; }; #endif /* _LINUX_PCA953X_H */ diff --git a/include/linux/platform_data/pca954x.h b/include/linux/platform_data/pca954x.h deleted file mode 100644 index 1712677d5904..000000000000 --- a/include/linux/platform_data/pca954x.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * - * pca954x.h - I2C multiplexer/switch support - * - * Copyright (c) 2008-2009 Rodolfo Giometti <giometti@linux.it> - * Copyright (c) 2008-2009 Eurotech S.p.A. <info@eurotech.it> - * Michael Lawnick <michael.lawnick.ext@nsn.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - - -#ifndef _LINUX_I2C_PCA954X_H -#define _LINUX_I2C_PCA954X_H - -/* Platform data for the PCA954x I2C multiplexers */ - -/* Per channel initialisation data: - * @adap_id: bus number for the adapter. 0 = don't care - * @deselect_on_exit: set this entry to 1, if your H/W needs deselection - * of this channel after transaction. - * - */ -struct pca954x_platform_mode { - int adap_id; - unsigned int deselect_on_exit:1; - unsigned int class; -}; - -/* Per mux/switch data, used with i2c_register_board_info */ -struct pca954x_platform_data { - struct pca954x_platform_mode *modes; - int num_modes; -}; - -#endif /* _LINUX_I2C_PCA954X_H */ diff --git a/include/linux/platform_data/pcf857x.h b/include/linux/platform_data/pcf857x.h deleted file mode 100644 index 11d4ed78c7f4..000000000000 --- a/include/linux/platform_data/pcf857x.h +++ /dev/null @@ -1,45 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __LINUX_PCF857X_H -#define __LINUX_PCF857X_H - -/** - * struct pcf857x_platform_data - data to set up pcf857x driver - * @gpio_base: number of the chip's first GPIO - * @n_latch: optional bit-inverse of initial register value; if - * you leave this initialized to zero the driver will act - * like the chip was just reset - * @setup: optional callback issued once the GPIOs are valid - * @teardown: optional callback issued before the GPIOs are invalidated - * @context: optional parameter passed to setup() and teardown() - * - * In addition to the I2C_BOARD_INFO() state appropriate to each chip, - * the i2c_board_info used with the pcf875x driver must provide its - * platform_data (pointer to one of these structures) with at least - * the gpio_base value initialized. - * - * The @setup callback may be used with the kind of board-specific glue - * which hands the (now-valid) GPIOs to other drivers, or which puts - * devices in their initial states using these GPIOs. - * - * These GPIO chips are only "quasi-bidirectional"; read the chip specs - * to understand the behavior. They don't have separate registers to - * record which pins are used for input or output, record which output - * values are driven, or provide access to input values. That must be - * inferred by reading the chip's value and knowing the last value written - * to it. If you leave n_latch initialized to zero, that last written - * value is presumed to be all ones (as if the chip were just reset). - */ -struct pcf857x_platform_data { - unsigned gpio_base; - unsigned n_latch; - - int (*setup)(struct i2c_client *client, - int gpio, unsigned ngpio, - void *context); - int (*teardown)(struct i2c_client *client, - int gpio, unsigned ngpio, - void *context); - void *context; -}; - -#endif /* __LINUX_PCF857X_H */ diff --git a/include/linux/platform_data/pcmcia-pxa2xx_viper.h b/include/linux/platform_data/pcmcia-pxa2xx_viper.h deleted file mode 100644 index a23b58aff9e1..000000000000 --- a/include/linux/platform_data/pcmcia-pxa2xx_viper.h +++ /dev/null @@ -1,12 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ARCOM_PCMCIA_H -#define __ARCOM_PCMCIA_H - -struct arcom_pcmcia_pdata { - int cd_gpio; - int rdy_gpio; - int pwr_gpio; - void (*reset)(int state); -}; - -#endif diff --git a/include/linux/platform_data/pinctrl-single.h b/include/linux/platform_data/pinctrl-single.h index 1cf36fdf9510..7473d3c4cabf 100644 --- a/include/linux/platform_data/pinctrl-single.h +++ b/include/linux/platform_data/pinctrl-single.h @@ -1,4 +1,8 @@ /* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef _PINCTRL_SINGLE_H +#define _PINCTRL_SINGLE_H + /** * irq: optional wake-up interrupt * rearm: optional soc specific rearm function @@ -11,3 +15,5 @@ struct pcs_pdata { int irq; void (*rearm)(void); }; + +#endif /* _PINCTRL_SINGLE_H */ diff --git a/include/linux/platform_data/pixcir_i2c_ts.h b/include/linux/platform_data/pixcir_i2c_ts.h deleted file mode 100644 index 4ab3cd6f1cc2..000000000000 --- a/include/linux/platform_data/pixcir_i2c_ts.h +++ /dev/null @@ -1,64 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _PIXCIR_I2C_TS_H -#define _PIXCIR_I2C_TS_H - -/* - * Register map - */ -#define PIXCIR_REG_POWER_MODE 51 -#define PIXCIR_REG_INT_MODE 52 - -/* - * Power modes: - * active: max scan speed - * idle: lower scan speed with automatic transition to active on touch - * halt: datasheet says sleep but this is more like halt as the chip - * clocks are cut and it can only be brought out of this mode - * using the RESET pin. - */ -enum pixcir_power_mode { - PIXCIR_POWER_ACTIVE, - PIXCIR_POWER_IDLE, - PIXCIR_POWER_HALT, -}; - -#define PIXCIR_POWER_MODE_MASK 0x03 -#define PIXCIR_POWER_ALLOW_IDLE (1UL << 2) - -/* - * Interrupt modes: - * periodical: interrupt is asserted periodicaly - * diff coordinates: interrupt is asserted when coordinates change - * level on touch: interrupt level asserted during touch - * pulse on touch: interrupt pulse asserted druing touch - * - */ -enum pixcir_int_mode { - PIXCIR_INT_PERIODICAL, - PIXCIR_INT_DIFF_COORD, - PIXCIR_INT_LEVEL_TOUCH, - PIXCIR_INT_PULSE_TOUCH, -}; - -#define PIXCIR_INT_MODE_MASK 0x03 -#define PIXCIR_INT_ENABLE (1UL << 3) -#define PIXCIR_INT_POL_HIGH (1UL << 2) - -/** - * struct pixcir_irc_chip_data - chip related data - * @max_fingers: Max number of fingers reported simultaneously by h/w - * @has_hw_ids: Hardware supports finger tracking IDs - * - */ -struct pixcir_i2c_chip_data { - u8 max_fingers; - bool has_hw_ids; -}; - -struct pixcir_ts_platform_data { - int x_max; - int y_max; - struct pixcir_i2c_chip_data chip; -}; - -#endif diff --git a/include/linux/platform_data/pm33xx.h b/include/linux/platform_data/pm33xx.h index fbf5ed73c7cc..7037ba7a53ca 100644 --- a/include/linux/platform_data/pm33xx.h +++ b/include/linux/platform_data/pm33xx.h @@ -46,11 +46,17 @@ struct am33xx_pm_sram_addr { }; struct am33xx_pm_platform_data { - int (*init)(void); + int (*init)(int (*idle)(u32 wfi_flags)); + int (*deinit)(void); int (*soc_suspend)(unsigned int state, int (*fn)(unsigned long), unsigned long args); + int (*cpu_suspend)(int (*fn)(unsigned long), unsigned long args); + void (*begin_suspend)(void); + void (*finish_suspend)(void); struct am33xx_pm_sram_addr *(*get_sram_addrs)(void); - void __iomem *(*get_rtc_base_addr)(void); + void (*save_context)(void); + void (*restore_context)(void); + int (*check_off_mode_enable)(void); }; struct am33xx_pm_sram_data { diff --git a/include/linux/platform_data/pwm_omap_dmtimer.h b/include/linux/platform_data/pwm_omap_dmtimer.h deleted file mode 100644 index e7d521e48855..000000000000 --- a/include/linux/platform_data/pwm_omap_dmtimer.h +++ /dev/null @@ -1,90 +0,0 @@ -/* - * include/linux/platform_data/pwm_omap_dmtimer.h - * - * OMAP Dual-Mode Timer PWM platform data - * - * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ - * Tarun Kanti DebBarma <tarun.kanti@ti.com> - * Thara Gopinath <thara@ti.com> - * - * Platform device conversion and hwmod support. - * - * Copyright (C) 2005 Nokia Corporation - * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com> - * PWM and clock framework support by Timo Teras. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __PWM_OMAP_DMTIMER_PDATA_H -#define __PWM_OMAP_DMTIMER_PDATA_H - -/* clock sources */ -#define PWM_OMAP_DMTIMER_SRC_SYS_CLK 0x00 -#define PWM_OMAP_DMTIMER_SRC_32_KHZ 0x01 -#define PWM_OMAP_DMTIMER_SRC_EXT_CLK 0x02 - -/* timer interrupt enable bits */ -#define PWM_OMAP_DMTIMER_INT_CAPTURE (1 << 2) -#define PWM_OMAP_DMTIMER_INT_OVERFLOW (1 << 1) -#define PWM_OMAP_DMTIMER_INT_MATCH (1 << 0) - -/* trigger types */ -#define PWM_OMAP_DMTIMER_TRIGGER_NONE 0x00 -#define PWM_OMAP_DMTIMER_TRIGGER_OVERFLOW 0x01 -#define PWM_OMAP_DMTIMER_TRIGGER_OVERFLOW_AND_COMPARE 0x02 - -struct omap_dm_timer; -typedef struct omap_dm_timer pwm_omap_dmtimer; - -struct pwm_omap_dmtimer_pdata { - pwm_omap_dmtimer *(*request_by_node)(struct device_node *np); - pwm_omap_dmtimer *(*request_specific)(int timer_id); - pwm_omap_dmtimer *(*request)(void); - - int (*free)(pwm_omap_dmtimer *timer); - - void (*enable)(pwm_omap_dmtimer *timer); - void (*disable)(pwm_omap_dmtimer *timer); - - int (*get_irq)(pwm_omap_dmtimer *timer); - int (*set_int_enable)(pwm_omap_dmtimer *timer, unsigned int value); - int (*set_int_disable)(pwm_omap_dmtimer *timer, u32 mask); - - struct clk *(*get_fclk)(pwm_omap_dmtimer *timer); - - int (*start)(pwm_omap_dmtimer *timer); - int (*stop)(pwm_omap_dmtimer *timer); - int (*set_source)(pwm_omap_dmtimer *timer, int source); - - int (*set_load)(pwm_omap_dmtimer *timer, int autoreload, - unsigned int value); - int (*set_match)(pwm_omap_dmtimer *timer, int enable, - unsigned int match); - int (*set_pwm)(pwm_omap_dmtimer *timer, int def_on, - int toggle, int trigger); - int (*set_prescaler)(pwm_omap_dmtimer *timer, int prescaler); - - unsigned int (*read_counter)(pwm_omap_dmtimer *timer); - int (*write_counter)(pwm_omap_dmtimer *timer, unsigned int value); - unsigned int (*read_status)(pwm_omap_dmtimer *timer); - int (*write_status)(pwm_omap_dmtimer *timer, unsigned int value); -}; - -#endif /* __PWM_OMAP_DMTIMER_PDATA_H */ diff --git a/include/linux/platform_data/pxa2xx_udc.h b/include/linux/platform_data/pxa2xx_udc.h index ff9c35dca59d..bc99cc6a3c5f 100644 --- a/include/linux/platform_data/pxa2xx_udc.h +++ b/include/linux/platform_data/pxa2xx_udc.h @@ -25,4 +25,10 @@ struct pxa2xx_udc_mach_info { int gpio_pullup; /* high == pullup activated */ }; +#ifdef CONFIG_PXA27x +extern void pxa27x_clear_otgph(void); +#else +#define pxa27x_clear_otgph() do {} while (0) +#endif + #endif diff --git a/include/linux/platform_data/pxa_sdhci.h b/include/linux/platform_data/pxa_sdhci.h index 4977c06d8a86..899457cee425 100644 --- a/include/linux/platform_data/pxa_sdhci.h +++ b/include/linux/platform_data/pxa_sdhci.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * include/linux/platform_data/pxa_sdhci.h * @@ -5,10 +6,6 @@ * Zhangfei Gao <zhangfei.gao@marvell.com> * * PXA Platform - SDHCI platform data definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _PXA_SDHCI_H_ diff --git a/include/linux/platform_data/regulator-haptic.h b/include/linux/platform_data/regulator-haptic.h index 5658e58e0738..4213e1b01316 100644 --- a/include/linux/platform_data/regulator-haptic.h +++ b/include/linux/platform_data/regulator-haptic.h @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Regulator Haptic Platform Data * * Copyright (c) 2014 Samsung Electronics Co., Ltd. * Author: Jaewon Kim <jaewon02.kim@samsung.com> * Author: Hyunhee Kim <hyunhee.kim@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _REGULATOR_HAPTIC_H diff --git a/include/linux/platform_data/remoteproc-omap.h b/include/linux/platform_data/remoteproc-omap.h deleted file mode 100644 index 71a1b2399c48..000000000000 --- a/include/linux/platform_data/remoteproc-omap.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * Remote Processor - omap-specific bits - * - * Copyright (C) 2011 Texas Instruments, Inc. - * Copyright (C) 2011 Google, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef _PLAT_REMOTEPROC_H -#define _PLAT_REMOTEPROC_H - -struct rproc_ops; -struct platform_device; - -/* - * struct omap_rproc_pdata - omap remoteproc's platform data - * @name: the remoteproc's name - * @oh_name: omap hwmod device - * @oh_name_opt: optional, secondary omap hwmod device - * @firmware: name of firmware file to load - * @mbox_name: name of omap mailbox device to use with this rproc - * @ops: start/stop rproc handlers - * @device_enable: omap-specific handler for enabling a device - * @device_shutdown: omap-specific handler for shutting down a device - * @set_bootaddr: omap-specific handler for setting the rproc boot address - */ -struct omap_rproc_pdata { - const char *name; - const char *oh_name; - const char *oh_name_opt; - const char *firmware; - const char *mbox_name; - const struct rproc_ops *ops; - int (*device_enable)(struct platform_device *pdev); - int (*device_shutdown)(struct platform_device *pdev); - void (*set_bootaddr)(u32); -}; - -#if defined(CONFIG_OMAP_REMOTEPROC) || defined(CONFIG_OMAP_REMOTEPROC_MODULE) - -void __init omap_rproc_reserve_cma(void); - -#else - -static inline void __init omap_rproc_reserve_cma(void) -{ -} - -#endif - -#endif /* _PLAT_REMOTEPROC_H */ diff --git a/include/linux/platform_data/rtc-ds2404.h b/include/linux/platform_data/rtc-ds2404.h deleted file mode 100644 index 22c53825528f..000000000000 --- a/include/linux/platform_data/rtc-ds2404.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * ds2404.h - platform data structure for the DS2404 RTC. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2012 Sven Schnelle <svens@stackframe.org> - */ - -#ifndef __LINUX_DS2404_H -#define __LINUX_DS2404_H - -struct ds2404_platform_data { - - unsigned int gpio_rst; - unsigned int gpio_clk; - unsigned int gpio_dq; -}; -#endif diff --git a/include/linux/platform_data/rtc-v3020.h b/include/linux/platform_data/rtc-v3020.h deleted file mode 100644 index e55d82cebf80..000000000000 --- a/include/linux/platform_data/rtc-v3020.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * v3020.h - Registers definition and platform data structure for the v3020 RTC. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2006, 8D Technologies inc. - */ -#ifndef __LINUX_V3020_H -#define __LINUX_V3020_H - -/* The v3020 has only one data pin but which one - * is used depends on the board. */ -struct v3020_platform_data { - int leftshift; /* (1<<(leftshift)) & readl() */ - - unsigned int use_gpio:1; - unsigned int gpio_cs; - unsigned int gpio_wr; - unsigned int gpio_rd; - unsigned int gpio_io; -}; - -#define V3020_STATUS_0 0x00 -#define V3020_STATUS_1 0x01 -#define V3020_SECONDS 0x02 -#define V3020_MINUTES 0x03 -#define V3020_HOURS 0x04 -#define V3020_MONTH_DAY 0x05 -#define V3020_MONTH 0x06 -#define V3020_YEAR 0x07 -#define V3020_WEEK_DAY 0x08 -#define V3020_WEEK 0x09 - -#define V3020_IS_COMMAND(val) ((val)>=0x0E) - -#define V3020_CMD_RAM2CLOCK 0x0E -#define V3020_CMD_CLOCK2RAM 0x0F - -#endif /* __LINUX_V3020_H */ diff --git a/include/linux/platform_data/s3c-hsotg.h b/include/linux/platform_data/s3c-hsotg.h index 3982586ba6df..004ddaf650cd 100644 --- a/include/linux/platform_data/s3c-hsotg.h +++ b/include/linux/platform_data/s3c-hsotg.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* include/linux/platform_data/s3c-hsotg.h * * Copyright 2008 Openmoko, Inc. @@ -6,10 +7,6 @@ * http://armlinux.simtec.co.uk/ * * S3C USB2.0 High-speed / OtG platform information - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __LINUX_USB_S3C_HSOTG_H diff --git a/include/linux/platform_data/s3c-hsudc.h b/include/linux/platform_data/s3c-hsudc.h deleted file mode 100644 index 6fa109339bf9..000000000000 --- a/include/linux/platform_data/s3c-hsudc.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * S3C24XX USB 2.0 High-speed USB controller gadget driver - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * The S3C24XX USB 2.0 high-speed USB controller supports upto 9 endpoints. - * Each endpoint can be configured as either in or out endpoint. Endpoints - * can be configured for Bulk or Interrupt transfer mode. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __LINUX_USB_S3C_HSUDC_H -#define __LINUX_USB_S3C_HSUDC_H - -/** - * s3c24xx_hsudc_platdata - Platform data for USB High-Speed gadget controller. - * @epnum: Number of endpoints to be instantiated by the controller driver. - * @gpio_init: Platform specific USB related GPIO initialization. - * @gpio_uninit: Platform specific USB releted GPIO uninitialzation. - * - * Representation of platform data for the S3C24XX USB 2.0 High Speed gadget - * controllers. - */ -struct s3c24xx_hsudc_platdata { - unsigned int epnum; - void (*gpio_init)(void); - void (*gpio_uninit)(void); -}; - -#endif /* __LINUX_USB_S3C_HSUDC_H */ diff --git a/include/linux/platform_data/sa11x0-serial.h b/include/linux/platform_data/sa11x0-serial.h index 8b79ab08af45..a88096bc74e4 100644 --- a/include/linux/platform_data/sa11x0-serial.h +++ b/include/linux/platform_data/sa11x0-serial.h @@ -10,7 +10,6 @@ #define SA11X0_SERIAL_H struct uart_port; -struct uart_info; /* * This is a temporary structure for registering these diff --git a/include/linux/platform_data/sc18is602.h b/include/linux/platform_data/sc18is602.h index 18602cab7799..0e91489edfe6 100644 --- a/include/linux/platform_data/sc18is602.h +++ b/include/linux/platform_data/sc18is602.h @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Platform data for NXP SC18IS602/603 * * Copyright (C) 2012 Guenter Roeck <linux@roeck-us.net> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * For further information, see the Documentation/spi/spi-sc18is602 file. + * For further information, see the Documentation/spi/spi-sc18is602.rst file. */ /** diff --git a/include/linux/platform_data/sdhci-pic32.h b/include/linux/platform_data/sdhci-pic32.h index 7e0efe64c8c5..8a53fd34daf7 100644 --- a/include/linux/platform_data/sdhci-pic32.h +++ b/include/linux/platform_data/sdhci-pic32.h @@ -1,15 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Purna Chandra Mandal, purna.mandal@microchip.com * Copyright (C) 2015 Microchip Technology Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. */ #ifndef __PIC32_SDHCI_PDATA_H__ #define __PIC32_SDHCI_PDATA_H__ diff --git a/include/linux/platform_data/serial-imx.h b/include/linux/platform_data/serial-imx.h deleted file mode 100644 index a938eba2f18e..000000000000 --- a/include/linux/platform_data/serial-imx.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef ASMARM_ARCH_UART_H -#define ASMARM_ARCH_UART_H - -#define IMXUART_HAVE_RTSCTS (1<<0) - -struct imxuart_platform_data { - unsigned int flags; -}; - -#endif diff --git a/include/linux/platform_data/serial-omap.h b/include/linux/platform_data/serial-omap.h index 2ba2c34ca3d3..0061d2451900 100644 --- a/include/linux/platform_data/serial-omap.h +++ b/include/linux/platform_data/serial-omap.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Driver for OMAP-UART controller. * Based on drivers/serial/8250.c @@ -7,11 +8,6 @@ * Authors: * Govindraj R <govindraj.raja@ti.com> * Thara Gopinath <thara@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ #ifndef __OMAP_SERIAL_H__ diff --git a/include/linux/platform_data/serial-sccnxp.h b/include/linux/platform_data/serial-sccnxp.h index af0c8c3b89ae..dc670f24e710 100644 --- a/include/linux/platform_data/serial-sccnxp.h +++ b/include/linux/platform_data/serial-sccnxp.h @@ -1,14 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * NXP (Philips) SCC+++(SCN+++) serial driver * * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru> * * Based on sc26xx.c, by Thomas Bogendörfer (tsbogend@alpha.franken.de) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ #ifndef _PLATFORM_DATA_SERIAL_SCCNXP_H_ diff --git a/include/linux/platform_data/sgi-w1.h b/include/linux/platform_data/sgi-w1.h new file mode 100644 index 000000000000..e28c8a90ff84 --- /dev/null +++ b/include/linux/platform_data/sgi-w1.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * SGI One-Wire (W1) IP + */ + +#ifndef PLATFORM_DATA_SGI_W1_H +#define PLATFORM_DATA_SGI_W1_H + +struct sgi_w1_platform_data { + char dev_id[64]; +}; + +#endif /* PLATFORM_DATA_SGI_W1_H */ diff --git a/include/linux/platform_data/sh_mmcif.h b/include/linux/platform_data/sh_mmcif.h new file mode 100644 index 000000000000..6eb914f958f9 --- /dev/null +++ b/include/linux/platform_data/sh_mmcif.h @@ -0,0 +1,207 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * platform data for eMMC driver + * + * Copyright (C) 2010 Renesas Solutions Corp. + */ + +#ifndef LINUX_MMC_SH_MMCIF_H +#define LINUX_MMC_SH_MMCIF_H + +#include <linux/io.h> +#include <linux/platform_device.h> + +/* + * MMCIF : CE_CLK_CTRL [19:16] + * 1000 : Peripheral clock / 512 + * 0111 : Peripheral clock / 256 + * 0110 : Peripheral clock / 128 + * 0101 : Peripheral clock / 64 + * 0100 : Peripheral clock / 32 + * 0011 : Peripheral clock / 16 + * 0010 : Peripheral clock / 8 + * 0001 : Peripheral clock / 4 + * 0000 : Peripheral clock / 2 + * 1111 : Peripheral clock (sup_pclk set '1') + */ + +struct sh_mmcif_plat_data { + unsigned int slave_id_tx; /* embedded slave_id_[tr]x */ + unsigned int slave_id_rx; + u8 sup_pclk; /* 1 :SH7757, 0: SH7724/SH7372 */ + unsigned long caps; + u32 ocr; +}; + +#define MMCIF_CE_CMD_SET 0x00000000 +#define MMCIF_CE_ARG 0x00000008 +#define MMCIF_CE_ARG_CMD12 0x0000000C +#define MMCIF_CE_CMD_CTRL 0x00000010 +#define MMCIF_CE_BLOCK_SET 0x00000014 +#define MMCIF_CE_CLK_CTRL 0x00000018 +#define MMCIF_CE_BUF_ACC 0x0000001C +#define MMCIF_CE_RESP3 0x00000020 +#define MMCIF_CE_RESP2 0x00000024 +#define MMCIF_CE_RESP1 0x00000028 +#define MMCIF_CE_RESP0 0x0000002C +#define MMCIF_CE_RESP_CMD12 0x00000030 +#define MMCIF_CE_DATA 0x00000034 +#define MMCIF_CE_INT 0x00000040 +#define MMCIF_CE_INT_MASK 0x00000044 +#define MMCIF_CE_HOST_STS1 0x00000048 +#define MMCIF_CE_HOST_STS2 0x0000004C +#define MMCIF_CE_CLK_CTRL2 0x00000070 +#define MMCIF_CE_VERSION 0x0000007C + +/* CE_BUF_ACC */ +#define BUF_ACC_DMAWEN (1 << 25) +#define BUF_ACC_DMAREN (1 << 24) +#define BUF_ACC_BUSW_32 (0 << 17) +#define BUF_ACC_BUSW_16 (1 << 17) +#define BUF_ACC_ATYP (1 << 16) + +/* CE_CLK_CTRL */ +#define CLK_ENABLE (1 << 24) /* 1: output mmc clock */ +#define CLK_CLEAR (0xf << 16) +#define CLK_SUP_PCLK (0xf << 16) +#define CLKDIV_4 (1 << 16) /* mmc clock frequency. + * n: bus clock/(2^(n+1)) */ +#define CLKDIV_256 (7 << 16) /* mmc clock frequency. (see above) */ +#define SRSPTO_256 (2 << 12) /* resp timeout */ +#define SRBSYTO_29 (0xf << 8) /* resp busy timeout */ +#define SRWDTO_29 (0xf << 4) /* read/write timeout */ +#define SCCSTO_29 (0xf << 0) /* ccs timeout */ + +/* CE_VERSION */ +#define SOFT_RST_ON (1 << 31) +#define SOFT_RST_OFF 0 + +static inline u32 sh_mmcif_readl(void __iomem *addr, int reg) +{ + return __raw_readl(addr + reg); +} + +static inline void sh_mmcif_writel(void __iomem *addr, int reg, u32 val) +{ + __raw_writel(val, addr + reg); +} + +#define SH_MMCIF_BBS 512 /* boot block size */ + +static inline void sh_mmcif_boot_cmd_send(void __iomem *base, + unsigned long cmd, unsigned long arg) +{ + sh_mmcif_writel(base, MMCIF_CE_INT, 0); + sh_mmcif_writel(base, MMCIF_CE_ARG, arg); + sh_mmcif_writel(base, MMCIF_CE_CMD_SET, cmd); +} + +static inline int sh_mmcif_boot_cmd_poll(void __iomem *base, unsigned long mask) +{ + unsigned long tmp; + int cnt; + + for (cnt = 0; cnt < 1000000; cnt++) { + tmp = sh_mmcif_readl(base, MMCIF_CE_INT); + if (tmp & mask) { + sh_mmcif_writel(base, MMCIF_CE_INT, tmp & ~mask); + return 0; + } + } + + return -1; +} + +static inline int sh_mmcif_boot_cmd(void __iomem *base, + unsigned long cmd, unsigned long arg) +{ + sh_mmcif_boot_cmd_send(base, cmd, arg); + return sh_mmcif_boot_cmd_poll(base, 0x00010000); +} + +static inline int sh_mmcif_boot_do_read_single(void __iomem *base, + unsigned int block_nr, + unsigned long *buf) +{ + int k; + + /* CMD13 - Status */ + sh_mmcif_boot_cmd(base, 0x0d400000, 0x00010000); + + if (sh_mmcif_readl(base, MMCIF_CE_RESP0) != 0x0900) + return -1; + + /* CMD17 - Read */ + sh_mmcif_boot_cmd(base, 0x11480000, block_nr * SH_MMCIF_BBS); + if (sh_mmcif_boot_cmd_poll(base, 0x00100000) < 0) + return -1; + + for (k = 0; k < (SH_MMCIF_BBS / 4); k++) + buf[k] = sh_mmcif_readl(base, MMCIF_CE_DATA); + + return 0; +} + +static inline int sh_mmcif_boot_do_read(void __iomem *base, + unsigned long first_block, + unsigned long nr_blocks, + void *buf) +{ + unsigned long k; + int ret = 0; + + /* In data transfer mode: Set clock to Bus clock/4 (about 20Mhz) */ + sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL, + CLK_ENABLE | CLKDIV_4 | SRSPTO_256 | + SRBSYTO_29 | SRWDTO_29 | SCCSTO_29); + + /* CMD9 - Get CSD */ + sh_mmcif_boot_cmd(base, 0x09806000, 0x00010000); + + /* CMD7 - Select the card */ + sh_mmcif_boot_cmd(base, 0x07400000, 0x00010000); + + /* CMD16 - Set the block size */ + sh_mmcif_boot_cmd(base, 0x10400000, SH_MMCIF_BBS); + + for (k = 0; !ret && k < nr_blocks; k++) + ret = sh_mmcif_boot_do_read_single(base, first_block + k, + buf + (k * SH_MMCIF_BBS)); + + return ret; +} + +static inline void sh_mmcif_boot_init(void __iomem *base) +{ + /* reset */ + sh_mmcif_writel(base, MMCIF_CE_VERSION, SOFT_RST_ON); + sh_mmcif_writel(base, MMCIF_CE_VERSION, SOFT_RST_OFF); + + /* byte swap */ + sh_mmcif_writel(base, MMCIF_CE_BUF_ACC, BUF_ACC_ATYP); + + /* Set block size in MMCIF hardware */ + sh_mmcif_writel(base, MMCIF_CE_BLOCK_SET, SH_MMCIF_BBS); + + /* Enable the clock, set it to Bus clock/256 (about 325Khz). */ + sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL, + CLK_ENABLE | CLKDIV_256 | SRSPTO_256 | + SRBSYTO_29 | SRWDTO_29 | SCCSTO_29); + + /* CMD0 */ + sh_mmcif_boot_cmd(base, 0x00000040, 0); + + /* CMD1 - Get OCR */ + do { + sh_mmcif_boot_cmd(base, 0x01405040, 0x40300000); /* CMD1 */ + } while ((sh_mmcif_readl(base, MMCIF_CE_RESP0) & 0x80000000) + != 0x80000000); + + /* CMD2 - Get CID */ + sh_mmcif_boot_cmd(base, 0x02806040, 0); + + /* CMD3 - Set card relative address */ + sh_mmcif_boot_cmd(base, 0x03400040, 0x00010000); +} + +#endif /* LINUX_MMC_SH_MMCIF_H */ diff --git a/include/linux/platform_data/shmob_drm.h b/include/linux/platform_data/shmob_drm.h index fe815d7d9f58..6c19d4fbbe39 100644 --- a/include/linux/platform_data/shmob_drm.h +++ b/include/linux/platform_data/shmob_drm.h @@ -10,9 +10,7 @@ #ifndef __SHMOB_DRM_H__ #define __SHMOB_DRM_H__ -#include <linux/kernel.h> - -#include <drm/drm_mode.h> +#include <video/videomode.h> enum shmob_drm_clk_source { SHMOB_DRM_CLK_BUS, @@ -20,72 +18,21 @@ enum shmob_drm_clk_source { SHMOB_DRM_CLK_EXTERNAL, }; -enum shmob_drm_interface { - SHMOB_DRM_IFACE_RGB8, /* 24bpp, 8:8:8 */ - SHMOB_DRM_IFACE_RGB9, /* 18bpp, 9:9 */ - SHMOB_DRM_IFACE_RGB12A, /* 24bpp, 12:12 */ - SHMOB_DRM_IFACE_RGB12B, /* 12bpp */ - SHMOB_DRM_IFACE_RGB16, /* 16bpp */ - SHMOB_DRM_IFACE_RGB18, /* 18bpp */ - SHMOB_DRM_IFACE_RGB24, /* 24bpp */ - SHMOB_DRM_IFACE_YUV422, /* 16bpp */ - SHMOB_DRM_IFACE_SYS8A, /* 24bpp, 8:8:8 */ - SHMOB_DRM_IFACE_SYS8B, /* 18bpp, 8:8:2 */ - SHMOB_DRM_IFACE_SYS8C, /* 18bpp, 2:8:8 */ - SHMOB_DRM_IFACE_SYS8D, /* 16bpp, 8:8 */ - SHMOB_DRM_IFACE_SYS9, /* 18bpp, 9:9 */ - SHMOB_DRM_IFACE_SYS12, /* 24bpp, 12:12 */ - SHMOB_DRM_IFACE_SYS16A, /* 16bpp */ - SHMOB_DRM_IFACE_SYS16B, /* 18bpp, 16:2 */ - SHMOB_DRM_IFACE_SYS16C, /* 18bpp, 2:16 */ - SHMOB_DRM_IFACE_SYS18, /* 18bpp */ - SHMOB_DRM_IFACE_SYS24, /* 24bpp */ -}; - -struct shmob_drm_backlight_data { - const char *name; - int max_brightness; - int (*get_brightness)(void); - int (*set_brightness)(int brightness); -}; - struct shmob_drm_panel_data { unsigned int width_mm; /* Panel width in mm */ unsigned int height_mm; /* Panel height in mm */ - struct drm_mode_modeinfo mode; -}; - -struct shmob_drm_sys_interface_data { - unsigned int read_latch:6; - unsigned int read_setup:8; - unsigned int read_cycle:8; - unsigned int read_strobe:8; - unsigned int write_setup:8; - unsigned int write_cycle:8; - unsigned int write_strobe:8; - unsigned int cs_setup:3; - unsigned int vsync_active_high:1; - unsigned int vsync_dir_input:1; + struct videomode mode; }; -#define SHMOB_DRM_IFACE_FL_DWPOL (1 << 0) /* Rising edge dot clock data latch */ -#define SHMOB_DRM_IFACE_FL_DIPOL (1 << 1) /* Active low display enable */ -#define SHMOB_DRM_IFACE_FL_DAPOL (1 << 2) /* Active low display data */ -#define SHMOB_DRM_IFACE_FL_HSCNT (1 << 3) /* Disable HSYNC during VBLANK */ -#define SHMOB_DRM_IFACE_FL_DWCNT (1 << 4) /* Disable dotclock during blanking */ - struct shmob_drm_interface_data { - enum shmob_drm_interface interface; - struct shmob_drm_sys_interface_data sys; + unsigned int bus_fmt; /* MEDIA_BUS_FMT_* */ unsigned int clk_div; - unsigned int flags; }; struct shmob_drm_platform_data { enum shmob_drm_clk_source clk_source; struct shmob_drm_interface_data iface; struct shmob_drm_panel_data panel; - struct shmob_drm_backlight_data backlight; }; #endif /* __SHMOB_DRM_H__ */ diff --git a/include/linux/platform_data/sht3x.h b/include/linux/platform_data/sht3x.h deleted file mode 100644 index 2e5eea358194..000000000000 --- a/include/linux/platform_data/sht3x.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * Copyright (C) 2016 Sensirion AG, Switzerland - * Author: David Frey <david.frey@sensirion.com> - * Author: Pascal Sachs <pascal.sachs@sensirion.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __SHT3X_H_ -#define __SHT3X_H_ - -struct sht3x_platform_data { - bool blocking_io; - bool high_precision; -}; -#endif /* __SHT3X_H_ */ diff --git a/include/linux/platform_data/shtc1.h b/include/linux/platform_data/shtc1.h index 7b8c353f7dc8..5ba6f8f9a9a1 100644 --- a/include/linux/platform_data/shtc1.h +++ b/include/linux/platform_data/shtc1.h @@ -1,16 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2014 Sensirion AG, Switzerland * Author: Johannes Winkelmann <johannes.winkelmann@sensirion.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * */ #ifndef __SHTC1_H_ diff --git a/include/linux/platform_data/si5351.h b/include/linux/platform_data/si5351.h index c71a2dd66143..5f412a615532 100644 --- a/include/linux/platform_data/si5351.h +++ b/include/linux/platform_data/si5351.h @@ -105,10 +105,12 @@ struct si5351_clkout_config { * @clk_xtal: xtal input clock * @clk_clkin: clkin input clock * @pll_src: array of pll source clock setting + * @pll_reset: array indicating if plls should be reset after setting the rate * @clkout: array of clkout configuration */ struct si5351_platform_data { enum si5351_pll_src pll_src[2]; + bool pll_reset[2]; struct si5351_clkout_config clkout[8]; }; diff --git a/include/linux/platform_data/simplefb.h b/include/linux/platform_data/simplefb.h index 077303cedbf4..4f94d52ac99f 100644 --- a/include/linux/platform_data/simplefb.h +++ b/include/linux/platform_data/simplefb.h @@ -1,12 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * simplefb.h - Simple Framebuffer Device * * Copyright (C) 2013 David Herrmann <dh.herrmann@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ #ifndef __PLATFORM_DATA_SIMPLEFB_H__ @@ -14,17 +10,19 @@ #include <drm/drm_fourcc.h> #include <linux/fb.h> -#include <linux/kernel.h> +#include <linux/types.h> /* format array, use it to initialize a "struct simplefb_format" array */ #define SIMPLEFB_FORMATS \ { \ { "r5g6b5", 16, {11, 5}, {5, 6}, {0, 5}, {0, 0}, DRM_FORMAT_RGB565 }, \ + { "r5g5b5a1", 16, {11, 5}, {6, 5}, {1, 5}, {0, 1}, DRM_FORMAT_RGBA5551 }, \ { "x1r5g5b5", 16, {10, 5}, {5, 5}, {0, 5}, {0, 0}, DRM_FORMAT_XRGB1555 }, \ { "a1r5g5b5", 16, {10, 5}, {5, 5}, {0, 5}, {15, 1}, DRM_FORMAT_ARGB1555 }, \ { "r8g8b8", 24, {16, 8}, {8, 8}, {0, 8}, {0, 0}, DRM_FORMAT_RGB888 }, \ { "x8r8g8b8", 32, {16, 8}, {8, 8}, {0, 8}, {0, 0}, DRM_FORMAT_XRGB8888 }, \ { "a8r8g8b8", 32, {16, 8}, {8, 8}, {0, 8}, {24, 8}, DRM_FORMAT_ARGB8888 }, \ + { "x8b8g8r8", 32, {0, 8}, {8, 8}, {16, 8}, {0, 0}, DRM_FORMAT_XBGR8888 }, \ { "a8b8g8r8", 32, {0, 8}, {8, 8}, {16, 8}, {24, 8}, DRM_FORMAT_ABGR8888 }, \ { "x2r10g10b10", 32, {20, 10}, {10, 10}, {0, 10}, {0, 0}, DRM_FORMAT_XRGB2101010 }, \ { "a2r10g10b10", 32, {20, 10}, {10, 10}, {0, 10}, {30, 2}, DRM_FORMAT_ARGB2101010 }, \ diff --git a/include/linux/platform_data/sky81452-backlight.h b/include/linux/platform_data/sky81452-backlight.h deleted file mode 100644 index 1231e9bb00f1..000000000000 --- a/include/linux/platform_data/sky81452-backlight.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * sky81452.h SKY81452 backlight driver - * - * Copyright 2014 Skyworks Solutions Inc. - * Author : Gyungoh Yoo <jack.yoo@skyworksinc.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, see <http://www.gnu.org/licenses/>. - */ - -#ifndef _SKY81452_BACKLIGHT_H -#define _SKY81452_BACKLIGHT_H - -/** - * struct sky81452_platform_data - * @name: backlight driver name. - If it is not defined, default name is lcd-backlight. - * @gpio_enable:GPIO number which control EN pin - * @enable: Enable mask for current sink channel 1, 2, 3, 4, 5 and 6. - * @ignore_pwm: true if DPWMI should be ignored. - * @dpwm_mode: true is DPWM dimming mode, otherwise Analog dimming mode. - * @phase_shift:true is phase shift mode. - * @short_detecion_threshold: It should be one of 4, 5, 6 and 7V. - * @boost_current_limit: It should be one of 2300, 2750mA. - */ -struct sky81452_bl_platform_data { - const char *name; - int gpio_enable; - unsigned int enable; - bool ignore_pwm; - bool dpwm_mode; - bool phase_shift; - unsigned int short_detection_threshold; - unsigned int boost_current_limit; -}; - -#endif diff --git a/include/linux/platform_data/spi-clps711x.h b/include/linux/platform_data/spi-clps711x.h deleted file mode 100644 index 301956e63143..000000000000 --- a/include/linux/platform_data/spi-clps711x.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * CLPS711X SPI bus driver definitions - * - * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef ____LINUX_PLATFORM_DATA_SPI_CLPS711X_H -#define ____LINUX_PLATFORM_DATA_SPI_CLPS711X_H - -/* Board specific platform_data */ -struct spi_clps711x_pdata { - int *chipselect; /* Array of GPIO-numbers */ - int num_chipselect; /* Total count of GPIOs */ -}; - -#endif diff --git a/include/linux/platform_data/spi-davinci.h b/include/linux/platform_data/spi-davinci.h deleted file mode 100644 index 0638fb6353bc..000000000000 --- a/include/linux/platform_data/spi-davinci.h +++ /dev/null @@ -1,86 +0,0 @@ -/* - * Copyright 2009 Texas Instruments. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ARCH_ARM_DAVINCI_SPI_H -#define __ARCH_ARM_DAVINCI_SPI_H - -#include <linux/platform_data/edma.h> - -#define SPI_INTERN_CS 0xFF - -enum { - SPI_VERSION_1, /* For DM355/DM365/DM6467 */ - SPI_VERSION_2, /* For DA8xx */ -}; - -/** - * davinci_spi_platform_data - Platform data for SPI master device on DaVinci - * - * @version: version of the SPI IP. Different DaVinci devices have slightly - * varying versions of the same IP. - * @num_chipselect: number of chipselects supported by this SPI master - * @intr_line: interrupt line used to connect the SPI IP to the ARM interrupt - * controller withn the SoC. Possible values are 0 and 1. - * @cshold_bug: set this to true if the SPI controller on your chip requires - * a write to CSHOLD bit in between transfers (like in DM355). - * @dma_event_q: DMA event queue to use if SPI_IO_TYPE_DMA is used for any - * device on the bus. - */ -struct davinci_spi_platform_data { - u8 version; - u8 num_chipselect; - u8 intr_line; - u8 prescaler_limit; - bool cshold_bug; - enum dma_event_q dma_event_q; -}; - -/** - * davinci_spi_config - Per-chip-select configuration for SPI slave devices - * - * @wdelay: amount of delay between transmissions. Measured in number of - * SPI module clocks. - * @odd_parity: polarity of parity flag at the end of transmit data stream. - * 0 - odd parity, 1 - even parity. - * @parity_enable: enable transmission of parity at end of each transmit - * data stream. - * @io_type: type of IO transfer. Choose between polled, interrupt and DMA. - * @timer_disable: disable chip-select timers (setup and hold) - * @c2tdelay: chip-select setup time. Measured in number of SPI module clocks. - * @t2cdelay: chip-select hold time. Measured in number of SPI module clocks. - * @t2edelay: transmit data finished to SPI ENAn pin inactive time. Measured - * in number of SPI clocks. - * @c2edelay: chip-select active to SPI ENAn signal active time. Measured in - * number of SPI clocks. - */ -struct davinci_spi_config { - u8 wdelay; - u8 odd_parity; - u8 parity_enable; -#define SPI_IO_TYPE_INTR 0 -#define SPI_IO_TYPE_POLL 1 -#define SPI_IO_TYPE_DMA 2 - u8 io_type; - u8 timer_disable; - u8 c2tdelay; - u8 t2cdelay; - u8 t2edelay; - u8 c2edelay; -}; - -#endif /* __ARCH_ARM_DAVINCI_SPI_H */ diff --git a/include/linux/platform_data/spi-ep93xx.h b/include/linux/platform_data/spi-ep93xx.h deleted file mode 100644 index eb16c6739ac2..000000000000 --- a/include/linux/platform_data/spi-ep93xx.h +++ /dev/null @@ -1,19 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_MACH_EP93XX_SPI_H -#define __ASM_MACH_EP93XX_SPI_H - -struct spi_device; - -/** - * struct ep93xx_spi_info - EP93xx specific SPI descriptor - * @chipselect: array of gpio numbers to use as chip selects - * @num_chipselect: ARRAY_SIZE(chipselect) - * @use_dma: use DMA for the transfers - */ -struct ep93xx_spi_info { - int *chipselect; - int num_chipselect; - bool use_dma; -}; - -#endif /* __ASM_MACH_EP93XX_SPI_H */ diff --git a/include/linux/platform_data/spi-imx.h b/include/linux/platform_data/spi-imx.h deleted file mode 100644 index 328f670d10bd..000000000000 --- a/include/linux/platform_data/spi-imx.h +++ /dev/null @@ -1,33 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ - -#ifndef __MACH_SPI_H_ -#define __MACH_SPI_H_ - -/* - * struct spi_imx_master - device.platform_data for SPI controller devices. - * @chipselect: Array of chipselects for this master or NULL. Numbers >= 0 - * mean GPIO pins, -ENOENT means internal CSPI chipselect - * matching the position in the array. E.g., if chipselect[1] = - * -ENOENT then a SPI slave using chip select 1 will use the - * native SS1 line of the CSPI. Omitting the array will use - * all native chip selects. - - * Normally you want to use gpio based chip selects as the CSPI - * module tries to be intelligent about when to assert the - * chipselect: The CSPI module deasserts the chipselect once it - * runs out of input data. The other problem is that it is not - * possible to mix between high active and low active chipselects - * on one single bus using the internal chipselects. - * Unfortunately, on some SoCs, Freescale decided to put some - * chipselects on dedicated pins which are not usable as gpios, - * so we have to support the internal chipselects. - * - * @num_chipselect: If @chipselect is specified, ARRAY_SIZE(chipselect), - * otherwise the number of native chip selects. - */ -struct spi_imx_master { - int *chipselect; - int num_chipselect; -}; - -#endif /* __MACH_SPI_H_*/ diff --git a/include/linux/platform_data/spi-mt65xx.h b/include/linux/platform_data/spi-mt65xx.h index ba4e4bb70262..f0db674f07b8 100644 --- a/include/linux/platform_data/spi-mt65xx.h +++ b/include/linux/platform_data/spi-mt65xx.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * MTK SPI bus driver definitions * * Copyright (c) 2015 MediaTek Inc. * Author: Leilk Liu <leilk.liu@mediatek.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef ____LINUX_PLATFORM_DATA_SPI_MTK_H @@ -14,9 +11,7 @@ /* Board specific platform_data */ struct mtk_chip_config { - u32 tx_mlsb; - u32 rx_mlsb; - u32 cs_pol; u32 sample_sel; + u32 tick_delay; }; #endif diff --git a/include/linux/platform_data/spi-nuc900.h b/include/linux/platform_data/spi-nuc900.h deleted file mode 100644 index 4b3f46832e19..000000000000 --- a/include/linux/platform_data/spi-nuc900.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * Copyright (c) 2009 Nuvoton technology corporation. - * - * Wan ZongShun <mcuos.com@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation;version 2 of the License. - * - */ - -#ifndef __SPI_NUC900_H -#define __SPI_NUC900_H - -extern void mfp_set_groupg(struct device *dev, const char *subname); - -struct nuc900_spi_info { - unsigned int num_cs; - unsigned int lsb; - unsigned int txneg; - unsigned int rxneg; - unsigned int divider; - unsigned int sleep; - unsigned int txnum; - unsigned int txbitlen; - int bus_num; -}; - -struct nuc900_spi_chip { - unsigned char bits_per_word; -}; - -#endif /* __SPI_NUC900_H */ diff --git a/include/linux/platform_data/spi-omap2-mcspi.h b/include/linux/platform_data/spi-omap2-mcspi.h index 0bf9fddb8306..9e3c15b4ac91 100644 --- a/include/linux/platform_data/spi-omap2-mcspi.h +++ b/include/linux/platform_data/spi-omap2-mcspi.h @@ -11,13 +11,11 @@ struct omap2_mcspi_platform_config { unsigned short num_cs; unsigned int regs_offset; unsigned int pin_dir:1; + size_t max_xfer_len; }; struct omap2_mcspi_device_config { unsigned turbo_mode:1; - - /* toggle chip select after every word */ - unsigned cs_per_word:1; }; #endif diff --git a/include/linux/platform_data/spi-s3c64xx.h b/include/linux/platform_data/spi-s3c64xx.h index 773daf7915a3..1d6e6c424fc6 100644 --- a/include/linux/platform_data/spi-s3c64xx.h +++ b/include/linux/platform_data/spi-s3c64xx.h @@ -16,7 +16,6 @@ struct platform_device; * struct s3c64xx_spi_csinfo - ChipSelect description * @fb_delay: Slave specific feedback delay. * Refer to FB_CLK_SEL register definition in SPI chapter. - * @line: Custom 'identity' of the CS line. * * This is per SPI-Slave Chipselect information. * Allocate and initialize one in machine init code and make the @@ -24,45 +23,36 @@ struct platform_device; */ struct s3c64xx_spi_csinfo { u8 fb_delay; - unsigned line; }; /** * struct s3c64xx_spi_info - SPI Controller defining structure * @src_clk_nr: Clock source index for the CLK_CFG[SPI_CLKSEL] field. * @num_cs: Number of CS this controller emulates. + * @no_cs: Used when CS line is not connected. * @cfg_gpio: Configure pins for this SPI controller. */ struct s3c64xx_spi_info { int src_clk_nr; int num_cs; bool no_cs; + bool polling; int (*cfg_gpio)(void); }; /** * s3c64xx_spi_set_platdata - SPI Controller configure callback by the board * initialization code. - * @cfg_gpio: Pointer to gpio setup function. * @src_clk_nr: Clock the SPI controller is to use to generate SPI clocks. * @num_cs: Number of elements in the 'cs' array. * * Call this from machine init code for each SPI Controller that * has some chips attached to it. */ -extern void s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, - int num_cs); -extern void s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, - int num_cs); -extern void s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, - int num_cs); +extern void s3c64xx_spi0_set_platdata(int src_clk_nr, int num_cs); /* defined by architecture to configure gpio */ extern int s3c64xx_spi0_cfg_gpio(void); -extern int s3c64xx_spi1_cfg_gpio(void); -extern int s3c64xx_spi2_cfg_gpio(void); extern struct s3c64xx_spi_info s3c64xx_spi0_pdata; -extern struct s3c64xx_spi_info s3c64xx_spi1_pdata; -extern struct s3c64xx_spi_info s3c64xx_spi2_pdata; #endif /*__SPI_S3C64XX_H */ diff --git a/include/linux/platform_data/ssm2518.h b/include/linux/platform_data/ssm2518.h deleted file mode 100644 index 9a8e3ea287e3..000000000000 --- a/include/linux/platform_data/ssm2518.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * SSM2518 amplifier audio driver - * - * Copyright 2013 Analog Devices Inc. - * Author: Lars-Peter Clausen <lars@metafoo.de> - * - * Licensed under the GPL-2. - */ - -#ifndef __LINUX_PLATFORM_DATA_SSM2518_H__ -#define __LINUX_PLATFORM_DATA_SSM2518_H__ - -/** - * struct ssm2518_platform_data - Platform data for the ssm2518 driver - * @enable_gpio: GPIO connected to the nSD pin. Set to -1 if the nSD pin is - * hardwired. - */ -struct ssm2518_platform_data { - int enable_gpio; -}; - -#endif diff --git a/include/linux/platform_data/st33zp24.h b/include/linux/platform_data/st33zp24.h deleted file mode 100644 index 6f0fb6ebd7db..000000000000 --- a/include/linux/platform_data/st33zp24.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * STMicroelectronics TPM Linux driver for TPM 1.2 ST33ZP24 - * Copyright (C) 2009 - 2016 STMicroelectronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see <http://www.gnu.org/licenses/>. - */ -#ifndef __ST33ZP24_H__ -#define __ST33ZP24_H__ - -#define TPM_ST33_I2C "st33zp24-i2c" -#define TPM_ST33_SPI "st33zp24-spi" - -struct st33zp24_platform_data { - int io_lpcpd; -}; - -#endif /* __ST33ZP24_H__ */ diff --git a/include/linux/platform_data/st_sensors_pdata.h b/include/linux/platform_data/st_sensors_pdata.h index 728193111c2f..a657830232ae 100644 --- a/include/linux/platform_data/st_sensors_pdata.h +++ b/include/linux/platform_data/st_sensors_pdata.h @@ -1,11 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * STMicroelectronics sensors platform-data driver * * Copyright 2013 STMicroelectronics Inc. * * Denis Ciocca <denis.ciocca@st.com> - * - * Licensed under the GPL-2. */ #ifndef ST_SENSORS_PDATA_H @@ -14,17 +13,20 @@ /** * struct st_sensors_platform_data - Platform data for the ST sensors * @drdy_int_pin: Redirect DRDY on pin 1 (1) or pin 2 (2). - * Available only for accelerometer and pressure sensors. + * Available only for accelerometer, magnetometer and pressure sensors. * Accelerometer DRDY on LSM330 available only on pin 1 (see datasheet). + * Magnetometer DRDY is supported only on LSM9DS0 and LSM303D. * @open_drain: set the interrupt line to be open drain if possible. * @spi_3wire: enable spi-3wire mode. * @pullups: enable/disable i2c controller pullup resistors. + * @wakeup_source: enable/disable device as wakeup generator. */ struct st_sensors_platform_data { u8 drdy_int_pin; bool open_drain; bool spi_3wire; bool pullups; + bool wakeup_source; }; #endif /* ST_SENSORS_PDATA_H */ diff --git a/include/linux/platform_data/syscon.h b/include/linux/platform_data/syscon.h deleted file mode 100644 index 2c089dd3e2bd..000000000000 --- a/include/linux/platform_data/syscon.h +++ /dev/null @@ -1,9 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef PLATFORM_DATA_SYSCON_H -#define PLATFORM_DATA_SYSCON_H - -struct syscon_platform_data { - const char *label; -}; - -#endif diff --git a/include/linux/platform_data/tc35876x.h b/include/linux/platform_data/tc35876x.h deleted file mode 100644 index cd6a51c71e7e..000000000000 --- a/include/linux/platform_data/tc35876x.h +++ /dev/null @@ -1,11 +0,0 @@ - -#ifndef _TC35876X_H -#define _TC35876X_H - -struct tc35876x_platform_data { - int gpio_bridge_reset; - int gpio_panel_bl_en; - int gpio_panel_vadd; -}; - -#endif /* _TC35876X_H */ diff --git a/include/linux/platform_data/ti-aemif.h b/include/linux/platform_data/ti-aemif.h deleted file mode 100644 index e6407bafcbf8..000000000000 --- a/include/linux/platform_data/ti-aemif.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * TI DaVinci AEMIF platform glue. - * - * Copyright (C) 2017 BayLibre SAS - * - * Author: - * Bartosz Golaszewski <bgolaszewski@baylibre.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __TI_DAVINCI_AEMIF_DATA_H__ -#define __TI_DAVINCI_AEMIF_DATA_H__ - -#include <linux/of_platform.h> - -/** - * struct aemif_abus_data - Async bus configuration parameters. - * - * @cs - Chip-select number. - */ -struct aemif_abus_data { - u32 cs; -}; - -/** - * struct aemif_platform_data - Data to set up the TI aemif driver. - * - * @dev_lookup: of_dev_auxdata passed to of_platform_populate() for aemif - * subdevices. - * @cs_offset: Lowest allowed chip-select number. - * @abus_data: Array of async bus configuration entries. - * @num_abus_data: Number of abus entries. - * @sub_devices: Array of platform subdevices. - * @num_sub_devices: Number of subdevices. - */ -struct aemif_platform_data { - struct of_dev_auxdata *dev_lookup; - u32 cs_offset; - struct aemif_abus_data *abus_data; - size_t num_abus_data; - struct platform_device *sub_devices; - size_t num_sub_devices; -}; - -#endif /* __TI_DAVINCI_AEMIF_DATA_H__ */ diff --git a/include/linux/platform_data/ti-prm.h b/include/linux/platform_data/ti-prm.h new file mode 100644 index 000000000000..28154c3226c2 --- /dev/null +++ b/include/linux/platform_data/ti-prm.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * TI PRM (Power & Reset Manager) platform data + * + * Copyright (C) 2019 Texas Instruments, Inc. + * + * Tero Kristo <t-kristo@ti.com> + */ + +#ifndef _LINUX_PLATFORM_DATA_TI_PRM_H +#define _LINUX_PLATFORM_DATA_TI_PRM_H + +struct clockdomain; + +struct ti_prm_platform_data { + void (*clkdm_deny_idle)(struct clockdomain *clkdm); + void (*clkdm_allow_idle)(struct clockdomain *clkdm); + struct clockdomain * (*clkdm_lookup)(const char *name); +}; + +#endif /* _LINUX_PLATFORM_DATA_TI_PRM_H */ diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h index 1ea3aab972b4..d8f15770a522 100644 --- a/include/linux/platform_data/ti-sysc.h +++ b/include/linux/platform_data/ti-sysc.h @@ -1,3 +1,5 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + #ifndef __TI_SYSC_DATA_H__ #define __TI_SYSC_DATA_H__ @@ -15,10 +17,12 @@ enum ti_sysc_module_type { TI_SYSC_OMAP4_MCASP, TI_SYSC_OMAP4_USB_HOST_FS, TI_SYSC_DRA7_MCAN, + TI_SYSC_PRUSS, }; struct ti_sysc_cookie { void *data; + void *clkdm; }; /** @@ -46,8 +50,29 @@ struct sysc_regbits { s8 emufree_shift; }; -#define SYSC_QUIRK_LEGACY_IDLE BIT(8) -#define SYSC_QUIRK_RESET_STATUS BIT(7) +#define SYSC_MODULE_QUIRK_OTG BIT(30) +#define SYSC_QUIRK_RESET_ON_CTX_LOST BIT(29) +#define SYSC_QUIRK_REINIT_ON_CTX_LOST BIT(28) +#define SYSC_QUIRK_REINIT_ON_RESUME BIT(27) +#define SYSC_QUIRK_GPMC_DEBUG BIT(26) +#define SYSC_MODULE_QUIRK_ENA_RESETDONE BIT(25) +#define SYSC_MODULE_QUIRK_PRUSS BIT(24) +#define SYSC_MODULE_QUIRK_DSS_RESET BIT(23) +#define SYSC_MODULE_QUIRK_RTC_UNLOCK BIT(22) +#define SYSC_QUIRK_CLKDM_NOAUTO BIT(21) +#define SYSC_QUIRK_FORCE_MSTANDBY BIT(20) +#define SYSC_MODULE_QUIRK_AESS BIT(19) +#define SYSC_MODULE_QUIRK_SGX BIT(18) +#define SYSC_MODULE_QUIRK_HDQ1W BIT(17) +#define SYSC_MODULE_QUIRK_I2C BIT(16) +#define SYSC_MODULE_QUIRK_WDT BIT(15) +#define SYSS_QUIRK_RESETDONE_INVERTED BIT(14) +#define SYSC_QUIRK_SWSUP_MSTANDBY BIT(13) +#define SYSC_QUIRK_SWSUP_SIDLE_ACT BIT(12) +#define SYSC_QUIRK_SWSUP_SIDLE BIT(11) +#define SYSC_QUIRK_EXT_OPT_CLOCK BIT(10) +#define SYSC_QUIRK_RESET_STATUS BIT(8) +#define SYSC_QUIRK_NO_IDLE BIT(7) #define SYSC_QUIRK_NO_IDLE_ON_INIT BIT(6) #define SYSC_QUIRK_NO_RESET_ON_INIT BIT(5) #define SYSC_QUIRK_OPT_CLKS_NEEDED BIT(4) @@ -60,7 +85,7 @@ struct sysc_regbits { /** * struct sysc_capabilities - capabilities for an interconnect target module - * + * @type: sysc type identifier for the module * @sysc_mask: bitmask of supported SYSCONFIG register bits * @regbits: bitmask of SYSCONFIG register bits * @mod_quirks: bitmask of module specific quirks @@ -75,8 +100,9 @@ struct sysc_capabilities { /** * struct sysc_config - configuration for an interconnect target module * @sysc_val: configured value for sysc register + * @syss_mask: configured mask value for SYSSTATUS register * @midlemodes: bitmask of supported master idle modes - * @sidlemodes: bitmask of supported master idle modes + * @sidlemodes: bitmask of supported slave idle modes * @srst_udelay: optional delay needed after OCP soft reset * @quirks: bitmask of enabled quirks */ @@ -120,9 +146,17 @@ struct ti_sysc_module_data { }; struct device; +struct clk; struct ti_sysc_platform_data { struct of_dev_auxdata *auxdata; + bool (*soc_type_gp)(void); + int (*init_clockdomain)(struct device *dev, struct clk *fck, + struct clk *ick, struct ti_sysc_cookie *cookie); + void (*clkdm_deny_idle)(struct device *dev, + const struct ti_sysc_cookie *cookie); + void (*clkdm_allow_idle)(struct device *dev, + const struct ti_sysc_cookie *cookie); int (*init_module)(struct device *dev, const struct ti_sysc_module_data *data, struct ti_sysc_cookie *cookie); diff --git a/include/linux/platform_data/tmio.h b/include/linux/platform_data/tmio.h new file mode 100644 index 000000000000..426291713b83 --- /dev/null +++ b/include/linux/platform_data/tmio.h @@ -0,0 +1,65 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef MFD_TMIO_H +#define MFD_TMIO_H + +#include <linux/platform_device.h> +#include <linux/types.h> + +/* TMIO MMC platform flags */ + +/* + * Some controllers can support a 2-byte block size when the bus width is + * configured in 4-bit mode. + */ +#define TMIO_MMC_BLKSZ_2BYTES BIT(1) + +/* Some controllers can support SDIO IRQ signalling */ +#define TMIO_MMC_SDIO_IRQ BIT(2) + +/* Some features are only available or tested on R-Car Gen2 or later */ +#define TMIO_MMC_MIN_RCAR2 BIT(3) + +/* + * Some controllers require waiting for the SD bus to become idle before + * writing to some registers. + */ +#define TMIO_MMC_HAS_IDLE_WAIT BIT(4) + +/* + * Use the busy timeout feature. Probably all TMIO versions support it. Yet, + * we don't have documentation for old variants, so we enable only known good + * variants with this flag. Can be removed once all variants are known good. + */ +#define TMIO_MMC_USE_BUSY_TIMEOUT BIT(5) + +/* Some controllers have CMD12 automatically issue/non-issue register */ +#define TMIO_MMC_HAVE_CMD12_CTRL BIT(7) + +/* Controller has some SDIO status bits which must be 1 */ +#define TMIO_MMC_SDIO_STATUS_SETBITS BIT(8) + +/* Some controllers have a 32-bit wide data port register */ +#define TMIO_MMC_32BIT_DATA_PORT BIT(9) + +/* Some controllers allows to set SDx actual clock */ +#define TMIO_MMC_CLK_ACTUAL BIT(10) + +/* Some controllers have a CBSY bit */ +#define TMIO_MMC_HAVE_CBSY BIT(11) + +/* Some controllers have a 64-bit wide data port register */ +#define TMIO_MMC_64BIT_DATA_PORT BIT(12) + +struct tmio_mmc_data { + void *chan_priv_tx; + void *chan_priv_rx; + unsigned int hclk; + unsigned long capabilities; + unsigned long capabilities2; + unsigned long flags; + u32 ocr_mask; /* available voltages */ + dma_addr_t dma_rx_offset; + unsigned int max_blk_count; + unsigned short max_segs; +}; +#endif diff --git a/include/linux/platform_data/touchscreen-s3c2410.h b/include/linux/platform_data/touchscreen-s3c2410.h deleted file mode 100644 index 71eccaa9835d..000000000000 --- a/include/linux/platform_data/touchscreen-s3c2410.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __TOUCHSCREEN_S3C2410_H -#define __TOUCHSCREEN_S3C2410_H - -struct s3c2410_ts_mach_info { - int delay; - int presc; - int oversampling_shift; - void (*cfg_gpio)(struct platform_device *dev); -}; - -extern void s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *); -extern void s3c64xx_ts_set_platdata(struct s3c2410_ts_mach_info *); - -/* defined by architecture to configure gpio */ -extern void s3c24xx_ts_cfg_gpio(struct platform_device *dev); - -#endif /*__TOUCHSCREEN_S3C2410_H */ diff --git a/include/linux/platform_data/tps68470.h b/include/linux/platform_data/tps68470.h new file mode 100644 index 000000000000..e605a2cab07f --- /dev/null +++ b/include/linux/platform_data/tps68470.h @@ -0,0 +1,40 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * TI TPS68470 PMIC platform data definition. + * + * Copyright (c) 2021 Red Hat Inc. + * + * Red Hat authors: + * Hans de Goede <hdegoede@redhat.com> + */ +#ifndef __PDATA_TPS68470_H +#define __PDATA_TPS68470_H + +enum tps68470_regulators { + TPS68470_CORE, + TPS68470_ANA, + TPS68470_VCM, + TPS68470_VIO, + TPS68470_VSIO, + TPS68470_AUX1, + TPS68470_AUX2, + TPS68470_NUM_REGULATORS +}; + +struct regulator_init_data; + +struct tps68470_regulator_platform_data { + const struct regulator_init_data *reg_init_data[TPS68470_NUM_REGULATORS]; +}; + +struct tps68470_clk_consumer { + const char *consumer_dev_name; + const char *consumer_con_id; +}; + +struct tps68470_clk_platform_data { + unsigned int n_consumers; + struct tps68470_clk_consumer consumers[]; +}; + +#endif diff --git a/include/linux/platform_data/tsl2563.h b/include/linux/platform_data/tsl2563.h deleted file mode 100644 index 9cf9309c3f24..000000000000 --- a/include/linux/platform_data/tsl2563.h +++ /dev/null @@ -1,9 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __LINUX_TSL2563_H -#define __LINUX_TSL2563_H - -struct tsl2563_platform_data { - int cover_comp_gain; -}; - -#endif /* __LINUX_TSL2563_H */ diff --git a/include/linux/platform_data/txx9/ndfmc.h b/include/linux/platform_data/txx9/ndfmc.h index fc172627d54e..7aaa4cd34d31 100644 --- a/include/linux/platform_data/txx9/ndfmc.h +++ b/include/linux/platform_data/txx9/ndfmc.h @@ -1,7 +1,5 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. * * (C) Copyright TOSHIBA CORPORATION 2007 */ diff --git a/include/linux/platform_data/uio_dmem_genirq.h b/include/linux/platform_data/uio_dmem_genirq.h index 973c1bb32168..c8f6de685306 100644 --- a/include/linux/platform_data/uio_dmem_genirq.h +++ b/include/linux/platform_data/uio_dmem_genirq.h @@ -1,16 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * include/linux/platform_data/uio_dmem_genirq.h * * Copyright (C) 2012 Damian Hobson-Garcia - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #ifndef _UIO_DMEM_GENIRQ_H diff --git a/include/linux/platform_data/uio_pruss.h b/include/linux/platform_data/uio_pruss.h deleted file mode 100644 index 3d47d219827f..000000000000 --- a/include/linux/platform_data/uio_pruss.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * include/linux/platform_data/uio_pruss.h - * - * Platform data for uio_pruss driver - * - * Copyright (C) 2010-11 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef _UIO_PRUSS_H_ -#define _UIO_PRUSS_H_ - -/* To configure the PRUSS INTC base offset for UIO driver */ -struct uio_pruss_pdata { - u32 pintc_base; - struct gen_pool *sram_pool; -}; -#endif /* _UIO_PRUSS_H_ */ diff --git a/include/linux/platform_data/usb-davinci.h b/include/linux/platform_data/usb-davinci.h deleted file mode 100644 index 0926e99f2e8f..000000000000 --- a/include/linux/platform_data/usb-davinci.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * USB related definitions - * - * Copyright (C) 2009 MontaVista Software, Inc. <source@mvista.com> - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_USB_H -#define __ASM_ARCH_USB_H - -struct da8xx_ohci_root_hub; - -typedef void (*da8xx_ocic_handler_t)(struct da8xx_ohci_root_hub *hub, - unsigned port); - -/* Passed as the platform data to the OHCI driver */ -struct da8xx_ohci_root_hub { - /* Switch the port power on/off */ - int (*set_power)(unsigned port, int on); - /* Read the port power status */ - int (*get_power)(unsigned port); - /* Read the port over-current indicator */ - int (*get_oci)(unsigned port); - /* Over-current indicator change notification (pass NULL to disable) */ - int (*ocic_notify)(da8xx_ocic_handler_t handler); - - /* Time from power on to power good (in 2 ms units) */ - u8 potpgt; -}; - -void davinci_setup_usb(unsigned mA, unsigned potpgt_ms); - -#endif /* ifndef __ASM_ARCH_USB_H */ diff --git a/include/linux/platform_data/usb-ehci-mxc.h b/include/linux/platform_data/usb-ehci-mxc.h deleted file mode 100644 index ad9794d09bc8..000000000000 --- a/include/linux/platform_data/usb-ehci-mxc.h +++ /dev/null @@ -1,14 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __INCLUDE_ASM_ARCH_MXC_EHCI_H -#define __INCLUDE_ASM_ARCH_MXC_EHCI_H - -struct mxc_usbh_platform_data { - int (*init)(struct platform_device *pdev); - int (*exit)(struct platform_device *pdev); - - unsigned int portsc; - struct usb_phy *otg; -}; - -#endif /* __INCLUDE_ASM_ARCH_MXC_EHCI_H */ - diff --git a/include/linux/platform_data/usb-musb-ux500.h b/include/linux/platform_data/usb-musb-ux500.h index dd9c83ac7de0..8909f396febc 100644 --- a/include/linux/platform_data/usb-musb-ux500.h +++ b/include/linux/platform_data/usb-musb-ux500.h @@ -1,8 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) ST-Ericsson SA 2011 * * Author: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> - * License terms: GNU General Public License (GPL) version 2 */ #ifndef __ASM_ARCH_USB_H #define __ASM_ARCH_USB_H diff --git a/include/linux/platform_data/usb-mx2.h b/include/linux/platform_data/usb-mx2.h deleted file mode 100644 index 22d0b596262c..000000000000 --- a/include/linux/platform_data/usb-mx2.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * Copyright (C) 2009 Martin Fuzzey <mfuzzey@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_MX21_USBH -#define __ASM_ARCH_MX21_USBH - -enum mx21_usbh_xcvr { - /* Values below as used by hardware (HWMODE register) */ - MX21_USBXCVR_TXDIF_RXDIF = 0, - MX21_USBXCVR_TXDIF_RXSE = 1, - MX21_USBXCVR_TXSE_RXDIF = 2, - MX21_USBXCVR_TXSE_RXSE = 3, -}; - -struct mx21_usbh_platform_data { - enum mx21_usbh_xcvr host_xcvr; /* tranceiver mode host 1,2 ports */ - enum mx21_usbh_xcvr otg_xcvr; /* tranceiver mode otg (as host) port */ - u16 enable_host1:1, - enable_host2:1, - enable_otg_host:1, /* enable "OTG" port (as host) */ - host1_xcverless:1, /* traceiverless host1 port */ - host1_txenoe:1, /* output enable host1 transmit enable */ - otg_ext_xcvr:1, /* external tranceiver for OTG port */ - unused:10; -}; - -#endif /* __ASM_ARCH_MX21_USBH */ diff --git a/include/linux/platform_data/usb-ohci-s3c2410.h b/include/linux/platform_data/usb-ohci-s3c2410.h index cc7554ae6e8b..558a9605be78 100644 --- a/include/linux/platform_data/usb-ohci-s3c2410.h +++ b/include/linux/platform_data/usb-ohci-s3c2410.h @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* arch/arm/plat-samsung/include/plat/usb-control.h * * Copyright (c) 2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * S3C - USB host port information - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ASM_ARCH_USBCONTROL_H diff --git a/include/linux/platform_data/usb-omap.h b/include/linux/platform_data/usb-omap.h index fa579b4c666b..580978e468f8 100644 --- a/include/linux/platform_data/usb-omap.h +++ b/include/linux/platform_data/usb-omap.h @@ -1,22 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * usb-omap.h - Platform data for the various OMAP USB IPs * - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com - * - * This software is distributed under the terms of the GNU General Public - * License ("GPL") version 2, as published by the Free Software Foundation. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com */ #define OMAP3_HS_USB_PORTS 3 diff --git a/include/linux/platform_data/usb-omap1.h b/include/linux/platform_data/usb-omap1.h index 43b5ce139c37..e7b8dc92a269 100644 --- a/include/linux/platform_data/usb-omap1.h +++ b/include/linux/platform_data/usb-omap1.h @@ -48,6 +48,10 @@ struct omap_usb_config { u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup); int (*ocpi_enable)(void); + + void (*lb_reset)(void); + + int (*transceiver_power)(int on); }; #endif /* __LINUX_USB_OMAP1_H */ diff --git a/include/linux/platform_data/usb-pxa3xx-ulpi.h b/include/linux/platform_data/usb-pxa3xx-ulpi.h deleted file mode 100644 index 9d82cb65ea56..000000000000 --- a/include/linux/platform_data/usb-pxa3xx-ulpi.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * PXA3xx U2D header - * - * Copyright (C) 2010 CompuLab Ltd. - * - * Igor Grinberg <grinberg@compulab.co.il> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __PXA310_U2D__ -#define __PXA310_U2D__ - -#include <linux/usb/ulpi.h> - -struct pxa3xx_u2d_platform_data { - -#define ULPI_SER_6PIN (1 << 0) -#define ULPI_SER_3PIN (1 << 1) - unsigned int ulpi_mode; - - int (*init)(struct device *); - void (*exit)(struct device *); -}; - - -/* Start PXA3xx U2D host */ -int pxa3xx_u2d_start_hc(struct usb_bus *host); -/* Stop PXA3xx U2D host */ -void pxa3xx_u2d_stop_hc(struct usb_bus *host); - -extern void pxa3xx_set_u2d_info(struct pxa3xx_u2d_platform_data *info); - -#endif /* __PXA310_U2D__ */ diff --git a/include/linux/platform_data/usb-s3c2410_udc.h b/include/linux/platform_data/usb-s3c2410_udc.h deleted file mode 100644 index de8e2288a509..000000000000 --- a/include/linux/platform_data/usb-s3c2410_udc.h +++ /dev/null @@ -1,44 +0,0 @@ -/* arch/arm/plat-samsung/include/plat/udc.h - * - * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org> - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * - * Changelog: - * 14-Mar-2005 RTP Created file - * 02-Aug-2005 RTP File rename - * 07-Sep-2005 BJD Minor cleanups, changed cmd to enum - * 18-Jan-2007 HMW Add per-platform vbus_draw function -*/ - -#ifndef __ASM_ARM_ARCH_UDC_H -#define __ASM_ARM_ARCH_UDC_H - -enum s3c2410_udc_cmd_e { - S3C2410_UDC_P_ENABLE = 1, /* Pull-up enable */ - S3C2410_UDC_P_DISABLE = 2, /* Pull-up disable */ - S3C2410_UDC_P_RESET = 3, /* UDC reset, in case of */ -}; - -struct s3c2410_udc_mach_info { - void (*udc_command)(enum s3c2410_udc_cmd_e); - void (*vbus_draw)(unsigned int ma); - - unsigned int pullup_pin; - unsigned int pullup_pin_inverted; - - unsigned int vbus_pin; - unsigned char vbus_pin_inverted; -}; - -extern void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *); - -struct s3c24xx_hsudc_platdata; - -extern void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd); - -#endif /* __ASM_ARM_ARCH_UDC_H */ diff --git a/include/linux/platform_data/usb3503.h b/include/linux/platform_data/usb3503.h index e049d51c1353..f3c942f396f8 100644 --- a/include/linux/platform_data/usb3503.h +++ b/include/linux/platform_data/usb3503.h @@ -12,14 +12,12 @@ enum usb3503_mode { USB3503_MODE_UNKNOWN, USB3503_MODE_HUB, USB3503_MODE_STANDBY, + USB3503_MODE_BYPASS, }; struct usb3503_platform_data { enum usb3503_mode initial_mode; u8 port_off_mask; - int gpio_intn; - int gpio_connect; - int gpio_reset; }; #endif diff --git a/include/linux/platform_data/ux500_wdt.h b/include/linux/platform_data/ux500_wdt.h deleted file mode 100644 index 1689ff4c3bfd..000000000000 --- a/include/linux/platform_data/ux500_wdt.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright (C) ST Ericsson SA 2011 - * - * License Terms: GNU General Public License v2 - * - * STE Ux500 Watchdog platform data - */ -#ifndef __UX500_WDT_H -#define __UX500_WDT_H - -/** - * struct ux500_wdt_data - */ -struct ux500_wdt_data { - unsigned int timeout; - bool has_28_bits_resolution; -}; - -#endif /* __UX500_WDT_H */ diff --git a/include/linux/platform_data/video-clcd-versatile.h b/include/linux/platform_data/video-clcd-versatile.h deleted file mode 100644 index 305ebaec3afd..000000000000 --- a/include/linux/platform_data/video-clcd-versatile.h +++ /dev/null @@ -1,28 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef PLAT_CLCD_H -#define PLAT_CLCD_H - -#ifdef CONFIG_PLAT_VERSATILE_CLCD -struct clcd_panel *versatile_clcd_get_panel(const char *); -int versatile_clcd_setup_dma(struct clcd_fb *, unsigned long); -int versatile_clcd_mmap_dma(struct clcd_fb *, struct vm_area_struct *); -void versatile_clcd_remove_dma(struct clcd_fb *); -#else -static inline struct clcd_panel *versatile_clcd_get_panel(const char *s) -{ - return NULL; -} -static inline int versatile_clcd_setup_dma(struct clcd_fb *fb, unsigned long framesize) -{ - return -ENODEV; -} -static inline int versatile_clcd_mmap_dma(struct clcd_fb *fb, struct vm_area_struct *vm) -{ - return -ENODEV; -} -static inline void versatile_clcd_remove_dma(struct clcd_fb *fb) -{ -} -#endif - -#endif diff --git a/include/linux/platform_data/video-imxfb.h b/include/linux/platform_data/video-imxfb.h deleted file mode 100644 index 02812651af7d..000000000000 --- a/include/linux/platform_data/video-imxfb.h +++ /dev/null @@ -1,70 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * This structure describes the machine which we are running on. - */ -#ifndef __MACH_IMXFB_H__ -#define __MACH_IMXFB_H__ - -#include <linux/fb.h> - -#define PCR_TFT (1 << 31) -#define PCR_COLOR (1 << 30) -#define PCR_PBSIZ_1 (0 << 28) -#define PCR_PBSIZ_2 (1 << 28) -#define PCR_PBSIZ_4 (2 << 28) -#define PCR_PBSIZ_8 (3 << 28) -#define PCR_BPIX_1 (0 << 25) -#define PCR_BPIX_2 (1 << 25) -#define PCR_BPIX_4 (2 << 25) -#define PCR_BPIX_8 (3 << 25) -#define PCR_BPIX_12 (4 << 25) -#define PCR_BPIX_16 (5 << 25) -#define PCR_BPIX_18 (6 << 25) -#define PCR_PIXPOL (1 << 24) -#define PCR_FLMPOL (1 << 23) -#define PCR_LPPOL (1 << 22) -#define PCR_CLKPOL (1 << 21) -#define PCR_OEPOL (1 << 20) -#define PCR_SCLKIDLE (1 << 19) -#define PCR_END_SEL (1 << 18) -#define PCR_END_BYTE_SWAP (1 << 17) -#define PCR_REV_VS (1 << 16) -#define PCR_ACD_SEL (1 << 15) -#define PCR_ACD(x) (((x) & 0x7f) << 8) -#define PCR_SCLK_SEL (1 << 7) -#define PCR_SHARP (1 << 6) -#define PCR_PCD(x) ((x) & 0x3f) - -#define PWMR_CLS(x) (((x) & 0x1ff) << 16) -#define PWMR_LDMSK (1 << 15) -#define PWMR_SCR1 (1 << 10) -#define PWMR_SCR0 (1 << 9) -#define PWMR_CC_EN (1 << 8) -#define PWMR_PW(x) ((x) & 0xff) - -#define LSCR1_PS_RISE_DELAY(x) (((x) & 0x7f) << 26) -#define LSCR1_CLS_RISE_DELAY(x) (((x) & 0x3f) << 16) -#define LSCR1_REV_TOGGLE_DELAY(x) (((x) & 0xf) << 8) -#define LSCR1_GRAY2(x) (((x) & 0xf) << 4) -#define LSCR1_GRAY1(x) (((x) & 0xf)) - -struct imx_fb_videomode { - struct fb_videomode mode; - u32 pcr; - bool aus_mode; - unsigned char bpp; -}; - -struct imx_fb_platform_data { - struct imx_fb_videomode *mode; - int num_modes; - - u_int pwmr; - u_int lscr1; - u_int dmacr; - - int (*init)(struct platform_device *); - void (*exit)(struct platform_device *); -}; - -#endif /* ifndef __MACH_IMXFB_H__ */ diff --git a/include/linux/platform_data/video-mx3fb.h b/include/linux/platform_data/video-mx3fb.h deleted file mode 100644 index fdbe60001542..000000000000 --- a/include/linux/platform_data/video-mx3fb.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * Copyright (C) 2008 - * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MX3FB_H__ -#define __ASM_ARCH_MX3FB_H__ - -#include <linux/device.h> -#include <linux/fb.h> - -/* Proprietary FB_SYNC_ flags */ -#define FB_SYNC_OE_ACT_HIGH 0x80000000 -#define FB_SYNC_CLK_INVERT 0x40000000 -#define FB_SYNC_DATA_INVERT 0x20000000 -#define FB_SYNC_CLK_IDLE_EN 0x10000000 -#define FB_SYNC_SHARP_MODE 0x08000000 -#define FB_SYNC_SWAP_RGB 0x04000000 -#define FB_SYNC_CLK_SEL_EN 0x02000000 - -/* - * Specify the way your display is connected. The IPU can arbitrarily - * map the internal colors to the external data lines. We only support - * the following mappings at the moment. - */ -enum disp_data_mapping { - /* blue -> d[0..5], green -> d[6..11], red -> d[12..17] */ - IPU_DISP_DATA_MAPPING_RGB666, - /* blue -> d[0..4], green -> d[5..10], red -> d[11..15] */ - IPU_DISP_DATA_MAPPING_RGB565, - /* blue -> d[0..7], green -> d[8..15], red -> d[16..23] */ - IPU_DISP_DATA_MAPPING_RGB888, -}; - -/** - * struct mx3fb_platform_data - mx3fb platform data - * - * @dma_dev: pointer to the dma-device, used for dma-slave connection - * @mode: pointer to a platform-provided per mxc_register_fb() videomode - */ -struct mx3fb_platform_data { - struct device *dma_dev; - const char *name; - const struct fb_videomode *mode; - int num_modes; - enum disp_data_mapping disp_data_fmt; -}; - -#endif diff --git a/include/linux/platform_data/video-nuc900fb.h b/include/linux/platform_data/video-nuc900fb.h deleted file mode 100644 index cec5ece765ed..000000000000 --- a/include/linux/platform_data/video-nuc900fb.h +++ /dev/null @@ -1,83 +0,0 @@ -/* linux/include/asm/arch-nuc900/fb.h - * - * Copyright (c) 2008 Nuvoton technology corporation - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * Changelog: - * - * 2008/08/26 vincen.zswan modify this file for LCD. - */ - -#ifndef __ASM_ARM_FB_H -#define __ASM_ARM_FB_H - - - -/* LCD Controller Hardware Desc */ -struct nuc900fb_hw { - unsigned int lcd_dccs; - unsigned int lcd_device_ctrl; - unsigned int lcd_mpulcd_cmd; - unsigned int lcd_int_cs; - unsigned int lcd_crtc_size; - unsigned int lcd_crtc_dend; - unsigned int lcd_crtc_hr; - unsigned int lcd_crtc_hsync; - unsigned int lcd_crtc_vr; - unsigned int lcd_va_baddr0; - unsigned int lcd_va_baddr1; - unsigned int lcd_va_fbctrl; - unsigned int lcd_va_scale; - unsigned int lcd_va_test; - unsigned int lcd_va_win; - unsigned int lcd_va_stuff; -}; - -/* LCD Display Description */ -struct nuc900fb_display { - /* LCD Image type */ - unsigned type; - - /* LCD Screen Size */ - unsigned short width; - unsigned short height; - - /* LCD Screen Info */ - unsigned short xres; - unsigned short yres; - unsigned short bpp; - - unsigned long pixclock; - unsigned short left_margin; - unsigned short right_margin; - unsigned short hsync_len; - unsigned short upper_margin; - unsigned short lower_margin; - unsigned short vsync_len; - - /* hardware special register value */ - unsigned int dccs; - unsigned int devctl; - unsigned int fbctrl; - unsigned int scale; -}; - -struct nuc900fb_mach_info { - struct nuc900fb_display *displays; - unsigned num_displays; - unsigned default_display; - /* GPIO Setting Info */ - unsigned gpio_dir; - unsigned gpio_dir_mask; - unsigned gpio_data; - unsigned gpio_data_mask; -}; - -extern void __init nuc900_fb_set_platdata(struct nuc900fb_mach_info *); - -#endif /* __ASM_ARM_FB_H */ diff --git a/include/linux/platform_data/video-pxafb.h b/include/linux/platform_data/video-pxafb.h index 07c6c1e153f8..38c24c77ba43 100644 --- a/include/linux/platform_data/video-pxafb.h +++ b/include/linux/platform_data/video-pxafb.h @@ -1,17 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Support for the xscale frame buffer. * * Author: Jean-Frederic Clere * Created: Sep 22, 2003 * Copyright: jfclere@sinix.net - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/fb.h> -#include <mach/regs-lcd.h> /* * Supported LCD connections @@ -154,7 +150,27 @@ struct pxafb_mach_info { }; void pxa_set_fb_info(struct device *, struct pxafb_mach_info *); -unsigned long pxafb_get_hsync_time(struct device *dev); + +/* smartpanel related */ +#define SMART_CMD_A0 (0x1 << 8) +#define SMART_CMD_READ_STATUS_REG (0x0 << 9) +#define SMART_CMD_READ_FRAME_BUFFER ((0x0 << 9) | SMART_CMD_A0) +#define SMART_CMD_WRITE_COMMAND (0x1 << 9) +#define SMART_CMD_WRITE_DATA ((0x1 << 9) | SMART_CMD_A0) +#define SMART_CMD_WRITE_FRAME ((0x2 << 9) | SMART_CMD_A0) +#define SMART_CMD_WAIT_FOR_VSYNC (0x3 << 9) +#define SMART_CMD_NOOP (0x4 << 9) +#define SMART_CMD_INTERRUPT (0x5 << 9) + +#define SMART_CMD(x) (SMART_CMD_WRITE_COMMAND | ((x) & 0xff)) +#define SMART_DAT(x) (SMART_CMD_WRITE_DATA | ((x) & 0xff)) + +/* SMART_DELAY() is introduced for software controlled delay primitive which + * can be inserted between command sequences, unused command 0x6 is used here + * and delay ranges from 0ms ~ 255ms + */ +#define SMART_CMD_DELAY (0x6 << 9) +#define SMART_DELAY(ms) (SMART_CMD_DELAY | ((ms) & 0xff)) #ifdef CONFIG_FB_PXA_SMARTPANEL extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int); diff --git a/include/linux/platform_data/voltage-omap.h b/include/linux/platform_data/voltage-omap.h index 5be4d5def427..6d74e507dbd2 100644 --- a/include/linux/platform_data/voltage-omap.h +++ b/include/linux/platform_data/voltage-omap.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * OMAP Voltage Management Routines * * Copyright (C) 2011, Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __ARCH_ARM_OMAP_VOLTAGE_H @@ -32,7 +29,6 @@ struct omap_volt_data { struct voltagedomain; struct voltagedomain *voltdm_lookup(const char *name); -int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt); unsigned long voltdm_get_voltage(struct voltagedomain *voltdm); struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, unsigned long volt); diff --git a/include/linux/platform_data/wilco-ec.h b/include/linux/platform_data/wilco-ec.h new file mode 100644 index 000000000000..3e268e636b5b --- /dev/null +++ b/include/linux/platform_data/wilco-ec.h @@ -0,0 +1,225 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * ChromeOS Wilco Embedded Controller + * + * Copyright 2018 Google LLC + */ + +#ifndef WILCO_EC_H +#define WILCO_EC_H + +#include <linux/mutex.h> +#include <linux/types.h> + +/* Message flags for using the mailbox() interface */ +#define WILCO_EC_FLAG_NO_RESPONSE BIT(0) /* EC does not respond */ + +/* Normal commands have a maximum 32 bytes of data */ +#define EC_MAILBOX_DATA_SIZE 32 + +struct device; +struct resource; +struct platform_device; + +/** + * struct wilco_ec_device - Wilco Embedded Controller handle. + * @dev: Device handle. + * @mailbox_lock: Mutex to ensure one mailbox command at a time. + * @io_command: I/O port for mailbox command. Provided by ACPI. + * @io_data: I/O port for mailbox data. Provided by ACPI. + * @io_packet: I/O port for mailbox packet data. Provided by ACPI. + * @data_buffer: Buffer used for EC communication. The same buffer + * is used to hold the request and the response. + * @data_size: Size of the data buffer used for EC communication. + * @debugfs_pdev: The child platform_device used by the debugfs sub-driver. + * @rtc_pdev: The child platform_device used by the RTC sub-driver. + * @charger_pdev: Child platform_device used by the charger config sub-driver. + * @telem_pdev: The child platform_device used by the telemetry sub-driver. + */ +struct wilco_ec_device { + struct device *dev; + struct mutex mailbox_lock; + struct resource *io_command; + struct resource *io_data; + struct resource *io_packet; + void *data_buffer; + size_t data_size; + struct platform_device *debugfs_pdev; + struct platform_device *rtc_pdev; + struct platform_device *charger_pdev; + struct platform_device *telem_pdev; +}; + +/** + * struct wilco_ec_request - Mailbox request message format. + * @struct_version: Should be %EC_MAILBOX_PROTO_VERSION + * @checksum: Sum of all bytes must be 0. + * @mailbox_id: Mailbox identifier, specifies the command set. + * @mailbox_version: Mailbox interface version %EC_MAILBOX_VERSION + * @reserved: Set to zero. + * @data_size: Length of following data. + */ +struct wilco_ec_request { + u8 struct_version; + u8 checksum; + u16 mailbox_id; + u8 mailbox_version; + u8 reserved; + u16 data_size; +} __packed; + +/** + * struct wilco_ec_response - Mailbox response message format. + * @struct_version: Should be %EC_MAILBOX_PROTO_VERSION + * @checksum: Sum of all bytes must be 0. + * @result: Result code from the EC. Non-zero indicates an error. + * @data_size: Length of the response data buffer. + * @reserved: Set to zero. + * @data: Response data buffer. Max size is %EC_MAILBOX_DATA_SIZE_EXTENDED. + */ +struct wilco_ec_response { + u8 struct_version; + u8 checksum; + u16 result; + u16 data_size; + u8 reserved[2]; + u8 data[]; +} __packed; + +/** + * enum wilco_ec_msg_type - Message type to select a set of command codes. + * @WILCO_EC_MSG_LEGACY: Legacy EC messages for standard EC behavior. + * @WILCO_EC_MSG_PROPERTY: Get/Set/Sync EC controlled NVRAM property. + * @WILCO_EC_MSG_TELEMETRY: Request telemetry data from the EC. + */ +enum wilco_ec_msg_type { + WILCO_EC_MSG_LEGACY = 0x00f0, + WILCO_EC_MSG_PROPERTY = 0x00f2, + WILCO_EC_MSG_TELEMETRY = 0x00f5, +}; + +/** + * struct wilco_ec_message - Request and response message. + * @type: Mailbox message type. + * @flags: Message flags, e.g. %WILCO_EC_FLAG_NO_RESPONSE. + * @request_size: Number of bytes to send to the EC. + * @request_data: Buffer containing the request data. + * @response_size: Number of bytes to read from EC. + * @response_data: Buffer containing the response data, should be + * response_size bytes and allocated by caller. + */ +struct wilco_ec_message { + enum wilco_ec_msg_type type; + u8 flags; + size_t request_size; + void *request_data; + size_t response_size; + void *response_data; +}; + +/** + * wilco_ec_mailbox() - Send request to the EC and receive the response. + * @ec: Wilco EC device. + * @msg: Wilco EC message. + * + * Return: Number of bytes received or negative error code on failure. + */ +int wilco_ec_mailbox(struct wilco_ec_device *ec, struct wilco_ec_message *msg); + +/** + * wilco_keyboard_leds_init() - Set up the keyboard backlight LEDs. + * @ec: EC device to query. + * + * After this call, the keyboard backlight will be exposed through a an LED + * device at /sys/class/leds. + * + * This may sleep because it uses wilco_ec_mailbox(). + * + * Return: 0 on success, negative error code on failure. + */ +int wilco_keyboard_leds_init(struct wilco_ec_device *ec); + +/* + * A Property is typically a data item that is stored to NVRAM + * by the EC. Each of these data items has an index associated + * with it, known as the Property ID (PID). Properties may have + * variable lengths, up to a max of WILCO_EC_PROPERTY_MAX_SIZE + * bytes. Properties can be simple integers, or they may be more + * complex binary data. + */ + +#define WILCO_EC_PROPERTY_MAX_SIZE 4 + +/** + * struct ec_property_set_msg - Message to get or set a property. + * @property_id: Which property to get or set. + * @length: Number of bytes of |data| that are used. + * @data: Actual property data. + */ +struct wilco_ec_property_msg { + u32 property_id; + int length; + u8 data[WILCO_EC_PROPERTY_MAX_SIZE]; +}; + +/** + * wilco_ec_get_property() - Retrieve a property from the EC. + * @ec: Embedded Controller device. + * @prop_msg: Message for request and response. + * + * The property_id field of |prop_msg| should be filled before calling this + * function. The result will be stored in the data and length fields. + * + * Return: 0 on success, negative error code on failure. + */ +int wilco_ec_get_property(struct wilco_ec_device *ec, + struct wilco_ec_property_msg *prop_msg); + +/** + * wilco_ec_set_property() - Store a property on the EC. + * @ec: Embedded Controller device. + * @prop_msg: Message for request and response. + * + * The property_id, length, and data fields of |prop_msg| should be + * filled before calling this function. + * + * Return: 0 on success, negative error code on failure. + */ +int wilco_ec_set_property(struct wilco_ec_device *ec, + struct wilco_ec_property_msg *prop_msg); + +/** + * wilco_ec_get_byte_property() - Retrieve a byte-size property from the EC. + * @ec: Embedded Controller device. + * @property_id: Which property to retrieve. + * @val: The result value, will be filled by this function. + * + * Return: 0 on success, negative error code on failure. + */ +int wilco_ec_get_byte_property(struct wilco_ec_device *ec, u32 property_id, + u8 *val); + +/** + * wilco_ec_get_byte_property() - Store a byte-size property on the EC. + * @ec: Embedded Controller device. + * @property_id: Which property to store. + * @val: Value to store. + * + * Return: 0 on success, negative error code on failure. + */ +int wilco_ec_set_byte_property(struct wilco_ec_device *ec, u32 property_id, + u8 val); + +/** + * wilco_ec_add_sysfs() - Create sysfs entries + * @ec: Wilco EC device + * + * wilco_ec_remove_sysfs() needs to be called afterwards + * to perform the necessary cleanup. + * + * Return: 0 on success or negative error code on failure. + */ +int wilco_ec_add_sysfs(struct wilco_ec_device *ec); +void wilco_ec_remove_sysfs(struct wilco_ec_device *ec); + +#endif /* WILCO_EC_H */ diff --git a/include/linux/platform_data/wiznet.h b/include/linux/platform_data/wiznet.h index b5d8c192d84d..1154c4db8a13 100644 --- a/include/linux/platform_data/wiznet.h +++ b/include/linux/platform_data/wiznet.h @@ -1,7 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Ethernet driver for the WIZnet W5x00 chip. - * - * Licensed under the GPL-2 or later. */ #ifndef PLATFORM_DATA_WIZNET_H diff --git a/include/linux/platform_data/wkup_m3.h b/include/linux/platform_data/wkup_m3.h index 3f1d77effd71..629660ff5806 100644 --- a/include/linux/platform_data/wkup_m3.h +++ b/include/linux/platform_data/wkup_m3.h @@ -1,18 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * TI Wakeup M3 remote processor platform data * * Copyright (C) 2014-2015 Texas Instruments, Inc. * * Dave Gerlach <d-gerlach@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #ifndef _LINUX_PLATFORM_DATA_WKUP_M3_H diff --git a/include/linux/platform_data/x86/amd-fch.h b/include/linux/platform_data/x86/amd-fch.h new file mode 100644 index 000000000000..2cf5153edbc2 --- /dev/null +++ b/include/linux/platform_data/x86/amd-fch.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_X86_AMD_FCH_H_ +#define _ASM_X86_AMD_FCH_H_ + +#define FCH_PM_BASE 0xFED80300 + +/* Register offsets from PM base: */ +#define FCH_PM_DECODEEN 0x00 +#define FCH_PM_DECODEEN_SMBUS0SEL GENMASK(20, 19) +#define FCH_PM_SCRATCH 0x80 +#define FCH_PM_S5_RESET_STATUS 0xC0 + +#endif /* _ASM_X86_AMD_FCH_H_ */ diff --git a/include/linux/platform_data/x86/asus-wmi-leds-ids.h b/include/linux/platform_data/x86/asus-wmi-leds-ids.h new file mode 100644 index 000000000000..034a039c4e37 --- /dev/null +++ b/include/linux/platform_data/x86/asus-wmi-leds-ids.h @@ -0,0 +1,50 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __PLATFORM_DATA_X86_ASUS_WMI_LEDS_IDS_H +#define __PLATFORM_DATA_X86_ASUS_WMI_LEDS_IDS_H + +#include <linux/dmi.h> +#include <linux/types.h> + +/* To be used by both hid-asus and asus-wmi to determine which controls kbd_brightness */ +#if IS_REACHABLE(CONFIG_ASUS_WMI) || IS_REACHABLE(CONFIG_HID_ASUS) +static const struct dmi_system_id asus_use_hid_led_dmi_ids[] = { + { + .matches = { + DMI_MATCH(DMI_PRODUCT_FAMILY, "ROG Zephyrus"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_PRODUCT_FAMILY, "ROG Strix"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_PRODUCT_FAMILY, "ROG Flow"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_PRODUCT_FAMILY, "ProArt P16"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "GA403U"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "GU605M"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "RC71L"), + }, + }, + { }, +}; +#endif + +#endif /* __PLATFORM_DATA_X86_ASUS_WMI_LEDS_IDS_H */ diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h index 53dfc2541960..419491d4abca 100644 --- a/include/linux/platform_data/x86/asus-wmi.h +++ b/include/linux/platform_data/x86/asus-wmi.h @@ -5,6 +5,9 @@ #include <linux/errno.h> #include <linux/types.h> +#define ASUS_WMI_MGMT_GUID "97845ED0-4E6D-11DE-8A39-0800200C9A66" +#define ASUS_ACPI_UID_ASUSWMI "ASUSWMI" + /* WMI Methods */ #define ASUS_WMI_METHODID_SPEC 0x43455053 /* BIOS SPECification */ #define ASUS_WMI_METHODID_SFBD 0x44424653 /* Set First Boot Device */ @@ -12,14 +15,14 @@ #define ASUS_WMI_METHODID_GPID 0x44495047 /* Get Panel ID?? (Resol) */ #define ASUS_WMI_METHODID_QMOD 0x444F4D51 /* Quiet MODe */ #define ASUS_WMI_METHODID_SPLV 0x4C425053 /* Set Panel Light Value */ -#define ASUS_WMI_METHODID_AGFN 0x4E464741 /* FaN? */ +#define ASUS_WMI_METHODID_AGFN 0x4E464741 /* Atk Generic FuNction */ #define ASUS_WMI_METHODID_SFUN 0x4E554653 /* FUNCtionalities */ #define ASUS_WMI_METHODID_SDSP 0x50534453 /* Set DiSPlay output */ #define ASUS_WMI_METHODID_GDSP 0x50534447 /* Get DiSPlay output */ #define ASUS_WMI_METHODID_DEVP 0x50564544 /* DEVice Policy */ #define ASUS_WMI_METHODID_OSVR 0x5256534F /* OS VeRsion */ -#define ASUS_WMI_METHODID_DSTS 0x53544344 /* Device STatuS */ -#define ASUS_WMI_METHODID_DSTS2 0x53545344 /* Device STatuS #2*/ +#define ASUS_WMI_METHODID_DCTS 0x53544344 /* Device status (DCTS) */ +#define ASUS_WMI_METHODID_DSTS 0x53545344 /* Device status (DSTS) */ #define ASUS_WMI_METHODID_BSTS 0x53545342 /* Bios STatuS ? */ #define ASUS_WMI_METHODID_DEVS 0x53564544 /* DEVice Set */ #define ASUS_WMI_METHODID_CFVS 0x53564643 /* CPU Frequency Volt Set */ @@ -49,6 +52,11 @@ #define ASUS_WMI_DEVID_LED4 0x00020014 #define ASUS_WMI_DEVID_LED5 0x00020015 #define ASUS_WMI_DEVID_LED6 0x00020016 +#define ASUS_WMI_DEVID_MICMUTE_LED 0x00040017 + +/* Disable Camera LED */ +#define ASUS_WMI_DEVID_CAMERA_LED_NEG 0x00060078 /* 0 = on (unused) */ +#define ASUS_WMI_DEVID_CAMERA_LED 0x00060079 /* 1 = on */ /* Backlight and Brightness */ #define ASUS_WMI_DEVID_ALS_ENABLE 0x00050001 /* Ambient Light Sensor */ @@ -57,9 +65,24 @@ #define ASUS_WMI_DEVID_KBD_BACKLIGHT 0x00050021 #define ASUS_WMI_DEVID_LIGHT_SENSOR 0x00050022 /* ?? */ #define ASUS_WMI_DEVID_LIGHTBAR 0x00050025 +#define ASUS_WMI_DEVID_OOBE 0x0005002F +/* This can only be used to disable the screen, not re-enable */ +#define ASUS_WMI_DEVID_SCREENPAD_POWER 0x00050031 +/* Writing a brightness re-enables the screen if disabled */ +#define ASUS_WMI_DEVID_SCREENPAD_LIGHT 0x00050032 +#define ASUS_WMI_DEVID_FAN_BOOST_MODE 0x00110018 +#define ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY 0x00120075 +#define ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO 0x00110019 /* Misc */ +#define ASUS_WMI_DEVID_PANEL_HD 0x0005001C +#define ASUS_WMI_DEVID_PANEL_OD 0x00050019 #define ASUS_WMI_DEVID_CAMERA 0x00060013 +#define ASUS_WMI_DEVID_LID_FLIP 0x00060062 +#define ASUS_WMI_DEVID_LID_FLIP_ROG 0x00060077 +#define ASUS_WMI_DEVID_MINI_LED_MODE 0x0005001E +#define ASUS_WMI_DEVID_MINI_LED_MODE2 0x0005002E +#define ASUS_WMI_DEVID_SCREEN_AUTO_BRIGHTNESS 0x0005002A /* Storage */ #define ASUS_WMI_DEVID_CARDREADER 0x00080013 @@ -67,10 +90,26 @@ /* Input */ #define ASUS_WMI_DEVID_TOUCHPAD 0x00100011 #define ASUS_WMI_DEVID_TOUCHPAD_LED 0x00100012 +#define ASUS_WMI_DEVID_FNLOCK 0x00100023 /* Fan, Thermal */ #define ASUS_WMI_DEVID_THERMAL_CTRL 0x00110011 -#define ASUS_WMI_DEVID_FAN_CTRL 0x00110012 +#define ASUS_WMI_DEVID_FAN_CTRL 0x00110012 /* deprecated */ +#define ASUS_WMI_DEVID_CPU_FAN_CTRL 0x00110013 +#define ASUS_WMI_DEVID_GPU_FAN_CTRL 0x00110014 +#define ASUS_WMI_DEVID_MID_FAN_CTRL 0x00110031 +#define ASUS_WMI_DEVID_CPU_FAN_CURVE 0x00110024 +#define ASUS_WMI_DEVID_GPU_FAN_CURVE 0x00110025 +#define ASUS_WMI_DEVID_MID_FAN_CURVE 0x00110032 + +/* Tunables for AUS ROG laptops */ +#define ASUS_WMI_DEVID_PPT_PL2_SPPT 0x001200A0 +#define ASUS_WMI_DEVID_PPT_PL1_SPL 0x001200A3 +#define ASUS_WMI_DEVID_PPT_APU_SPPT 0x001200B0 +#define ASUS_WMI_DEVID_PPT_PLAT_SPPT 0x001200B1 +#define ASUS_WMI_DEVID_PPT_PL3_FPPT 0x001200C1 +#define ASUS_WMI_DEVID_NV_DYN_BOOST 0x001200C0 +#define ASUS_WMI_DEVID_NV_THERM_TARGET 0x001200C2 /* Power */ #define ASUS_WMI_DEVID_PROCESSOR_STATE 0x00120012 @@ -78,6 +117,45 @@ /* Deep S3 / Resume on LID open */ #define ASUS_WMI_DEVID_LID_RESUME 0x00120031 +/* Maximum charging percentage */ +#define ASUS_WMI_DEVID_RSOC 0x00120057 + +/* Keyboard dock */ +#define ASUS_WMI_DEVID_KBD_DOCK 0x00120063 + +/* Charging mode - 1=Barrel, 2=USB */ +#define ASUS_WMI_DEVID_CHARGE_MODE 0x0012006C + +/* MCU powersave mode */ +#define ASUS_WMI_DEVID_MCU_POWERSAVE 0x001200E2 + +/* epu is connected? 1 == true */ +#define ASUS_WMI_DEVID_EGPU_CONNECTED 0x00090018 +/* egpu on/off */ +#define ASUS_WMI_DEVID_EGPU 0x00090019 + +/* dgpu on/off */ +#define ASUS_WMI_DEVID_DGPU 0x00090020 + +#define ASUS_WMI_DEVID_APU_MEM 0x000600C1 + +#define ASUS_WMI_DEVID_DGPU_BASE_TGP 0x00120099 +#define ASUS_WMI_DEVID_DGPU_SET_TGP 0x00120098 + +/* gpu mux switch, 0 = dGPU, 1 = Optimus */ +#define ASUS_WMI_DEVID_GPU_MUX 0x00090016 +#define ASUS_WMI_DEVID_GPU_MUX_VIVO 0x00090026 + +/* TUF laptop RGB modes/colours */ +#define ASUS_WMI_DEVID_TUF_RGB_MODE 0x00100056 +#define ASUS_WMI_DEVID_TUF_RGB_MODE2 0x0010005A + +/* TUF laptop RGB power/state */ +#define ASUS_WMI_DEVID_TUF_RGB_STATE 0x00100057 + +/* Bootup sound control */ +#define ASUS_WMI_DEVID_BOOT_SOUND 0x00130022 + /* DSTS masks */ #define ASUS_WMI_DSTS_STATUS_BIT 0x00000001 #define ASUS_WMI_DSTS_UNKNOWN_BIT 0x00000002 @@ -88,9 +166,33 @@ #define ASUS_WMI_DSTS_MAX_BRIGTH_MASK 0x0000FF00 #define ASUS_WMI_DSTS_LIGHTBAR_MASK 0x0000000F +enum asus_ally_mcu_hack { + ASUS_WMI_ALLY_MCU_HACK_INIT, + ASUS_WMI_ALLY_MCU_HACK_ENABLED, + ASUS_WMI_ALLY_MCU_HACK_DISABLED, +}; + #if IS_REACHABLE(CONFIG_ASUS_WMI) +void set_ally_mcu_hack(enum asus_ally_mcu_hack status); +void set_ally_mcu_powersave(bool enabled); +int asus_wmi_get_devstate_dsts(u32 dev_id, u32 *retval); +int asus_wmi_set_devstate(u32 dev_id, u32 ctrl_param, u32 *retval); int asus_wmi_evaluate_method(u32 method_id, u32 arg0, u32 arg1, u32 *retval); #else +static inline void set_ally_mcu_hack(enum asus_ally_mcu_hack status) +{ +} +static inline void set_ally_mcu_powersave(bool enabled) +{ +} +static inline int asus_wmi_set_devstate(u32 dev_id, u32 ctrl_param, u32 *retval) +{ + return -ENODEV; +} +static inline int asus_wmi_get_devstate_dsts(u32 dev_id, u32 *retval) +{ + return -ENODEV; +} static inline int asus_wmi_evaluate_method(u32 method_id, u32 arg0, u32 arg1, u32 *retval) { diff --git a/include/linux/platform_data/clk-lpss.h b/include/linux/platform_data/x86/clk-lpss.h index 23901992b9dd..7f132029316a 100644 --- a/include/linux/platform_data/clk-lpss.h +++ b/include/linux/platform_data/x86/clk-lpss.h @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Intel Low Power Subsystem clocks. * * Copyright (C) 2013, Intel Corporation * Authors: Mika Westerberg <mika.westerberg@linux.intel.com> * Rafael J. Wysocki <rafael.j.wysocki@intel.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __CLK_LPSS_H @@ -18,6 +15,6 @@ struct lpss_clk_data { struct clk *clk; }; -extern int lpt_clk_init(void); +int lpss_atom_clk_init(void); #endif /* __CLK_LPSS_H */ diff --git a/include/linux/platform_data/x86/clk-pmc-atom.h b/include/linux/platform_data/x86/clk-pmc-atom.h index 3ab892208343..2bdcf39b13ed 100644 --- a/include/linux/platform_data/x86/clk-pmc-atom.h +++ b/include/linux/platform_data/x86/clk-pmc-atom.h @@ -1,17 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Intel Atom platform clocks for BayTrail and CherryTrail SoC. * * Copyright (C) 2016, Intel Corporation * Author: Irina Tirdea <irina.tirdea@intel.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. */ #ifndef __PLATFORM_DATA_X86_CLK_PMC_ATOM_H @@ -35,10 +27,13 @@ struct pmc_clk { * * @base: PMC clock register base offset * @clks: pointer to set of registered clocks, typically 0..5 + * @critical: flag to indicate if firmware enabled pmc_plt_clks + * should be marked as critial or not */ struct pmc_clk_data { void __iomem *base; const struct pmc_clk *clks; + bool critical; }; #endif /* __PLATFORM_DATA_X86_CLK_PMC_ATOM_H */ diff --git a/include/linux/platform_data/x86/int3472.h b/include/linux/platform_data/x86/int3472.h new file mode 100644 index 000000000000..b1b837583d54 --- /dev/null +++ b/include/linux/platform_data/x86/int3472.h @@ -0,0 +1,166 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Intel INT3472 ACPI camera sensor power-management support + * + * Author: Dan Scally <djrscally@gmail.com> + */ + +#ifndef __PLATFORM_DATA_X86_INT3472_H +#define __PLATFORM_DATA_X86_INT3472_H + +#include <linux/clk-provider.h> +#include <linux/gpio/machine.h> +#include <linux/leds.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/types.h> + +/* FIXME drop this once the I2C_DEV_NAME_FORMAT macro has been added to include/linux/i2c.h */ +#ifndef I2C_DEV_NAME_FORMAT +#define I2C_DEV_NAME_FORMAT "i2c-%s" +#endif + +/* PMIC GPIO Types */ +#define INT3472_GPIO_TYPE_RESET 0x00 +#define INT3472_GPIO_TYPE_POWERDOWN 0x01 +#define INT3472_GPIO_TYPE_POWER_ENABLE 0x0b +#define INT3472_GPIO_TYPE_CLK_ENABLE 0x0c +#define INT3472_GPIO_TYPE_PRIVACY_LED 0x0d +#define INT3472_GPIO_TYPE_HANDSHAKE 0x12 +#define INT3472_GPIO_TYPE_HOTPLUG_DETECT 0x13 + +#define INT3472_PDEV_MAX_NAME_LEN 23 +#define INT3472_MAX_SENSOR_GPIOS 3 +#define INT3472_MAX_REGULATORS 3 + +/* E.g. "avdd\0" */ +#define GPIO_SUPPLY_NAME_LENGTH 5 +/* 12 chars for acpi_dev_name() + "-", e.g. "ABCD1234:00-" */ +#define GPIO_REGULATOR_NAME_LENGTH (12 + GPIO_SUPPLY_NAME_LENGTH) +/* lower- and upper-case mapping */ +#define GPIO_REGULATOR_SUPPLY_MAP_COUNT 2 +/* + * Ensure the GPIO is driven low/high for at least 2 ms before changing. + * + * 2 ms has been chosen because it is the minimum time ovXXXX sensors need to + * have their reset line driven logical high to properly register a reset. + */ +#define GPIO_REGULATOR_ENABLE_TIME (2 * USEC_PER_MSEC) +#define GPIO_REGULATOR_OFF_ON_DELAY (2 * USEC_PER_MSEC) + +#define INT3472_LED_MAX_NAME_LEN 32 + +#define CIO2_SENSOR_SSDB_MCLKSPEED_OFFSET 86 + +#define INT3472_REGULATOR(_name, _ops, _enable_time, _off_on_delay) \ + (const struct regulator_desc) { \ + .name = _name, \ + .type = REGULATOR_VOLTAGE, \ + .ops = _ops, \ + .owner = THIS_MODULE, \ + .enable_time = _enable_time, \ + .off_on_delay = _off_on_delay, \ + } + +#define to_int3472_clk(hw) \ + container_of(hw, struct int3472_clock, clk_hw) + +#define to_int3472_device(clk) \ + container_of(clk, struct int3472_discrete_device, clock) + +struct acpi_device; +struct dmi_system_id; +struct i2c_client; +struct platform_device; + +struct int3472_cldb { + u8 version; + /* + * control logic type + * 0: UNKNOWN + * 1: DISCRETE(CRD-D) + * 2: PMIC TPS68470 + * 3: PMIC uP6641 + */ + u8 control_logic_type; + u8 control_logic_id; + u8 sensor_card_sku; + u8 reserved[10]; + u8 clock_source; + u8 reserved2[17]; +}; + +struct int3472_discrete_quirks { + /* For models where AVDD GPIO is shared between sensors */ + const char *avdd_second_sensor; +}; + +struct int3472_gpio_regulator { + /* SUPPLY_MAP_COUNT * 2 to make room for second sensor mappings */ + struct regulator_consumer_supply supply_map[GPIO_REGULATOR_SUPPLY_MAP_COUNT * 2]; + char supply_name_upper[GPIO_SUPPLY_NAME_LENGTH]; + char regulator_name[GPIO_REGULATOR_NAME_LENGTH]; + struct regulator_dev *rdev; + struct regulator_desc rdesc; +}; + +struct int3472_discrete_device { + struct acpi_device *adev; + struct device *dev; + struct acpi_device *sensor; + const char *sensor_name; + + struct int3472_gpio_regulator regulators[INT3472_MAX_REGULATORS]; + + struct int3472_clock { + struct clk *clk; + struct clk_hw clk_hw; + struct clk_lookup *cl; + struct gpio_desc *ena_gpio; + u32 frequency; + u8 imgclk_index; + } clock; + + struct int3472_pled { + struct led_classdev classdev; + struct led_lookup_data lookup; + char name[INT3472_LED_MAX_NAME_LEN]; + struct gpio_desc *gpio; + } pled; + + struct int3472_discrete_quirks quirks; + + unsigned int ngpios; /* how many GPIOs have we seen */ + unsigned int n_sensor_gpios; /* how many have we mapped to sensor */ + unsigned int n_regulator_gpios; /* how many have we mapped to a regulator */ + struct gpiod_lookup_table gpios; +}; + +extern const struct dmi_system_id skl_int3472_discrete_quirks[]; + +union acpi_object *skl_int3472_get_acpi_buffer(struct acpi_device *adev, + char *id); +int skl_int3472_fill_cldb(struct acpi_device *adev, struct int3472_cldb *cldb); +int skl_int3472_get_sensor_adev_and_name(struct device *dev, + struct acpi_device **sensor_adev_ret, + const char **name_ret); + +int int3472_discrete_parse_crs(struct int3472_discrete_device *int3472); +void int3472_discrete_cleanup(struct int3472_discrete_device *int3472); + +int skl_int3472_register_gpio_clock(struct int3472_discrete_device *int3472, + struct gpio_desc *gpio); +int skl_int3472_register_dsm_clock(struct int3472_discrete_device *int3472); +void skl_int3472_unregister_clock(struct int3472_discrete_device *int3472); + +int skl_int3472_register_regulator(struct int3472_discrete_device *int3472, + struct gpio_desc *gpio, + unsigned int enable_time, + const char *supply_name, + const char *second_sensor); +void skl_int3472_unregister_regulator(struct int3472_discrete_device *int3472); + +int skl_int3472_register_pled(struct int3472_discrete_device *int3472, struct gpio_desc *gpio); +void skl_int3472_unregister_pled(struct int3472_discrete_device *int3472); + +#endif diff --git a/include/linux/platform_data/intel-mid_wdt.h b/include/linux/platform_data/x86/intel-mid_wdt.h index b98253466ace..e5c0210d0fec 100644 --- a/include/linux/platform_data/intel-mid_wdt.h +++ b/include/linux/platform_data/x86/intel-mid_wdt.h @@ -1,16 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * intel-mid_wdt: generic Intel MID SCU watchdog driver * * Copyright (C) 2014 Intel Corporation. All rights reserved. * Contact: David Cohen <david.a.cohen@linux.intel.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of version 2 of the GNU General - * Public License as published by the Free Software Foundation. */ -#ifndef __INTEL_MID_WDT_H__ -#define __INTEL_MID_WDT_H__ +#ifndef __PLATFORM_X86_INTEL_MID_WDT_H_ +#define __PLATFORM_X86_INTEL_MID_WDT_H_ #include <linux/platform_device.h> @@ -19,4 +16,4 @@ struct intel_mid_wdt_pdata { int (*probe)(struct platform_device *pdev); }; -#endif /*__INTEL_MID_WDT_H__*/ +#endif /* __PLATFORM_X86_INTEL_MID_WDT_H_ */ diff --git a/include/linux/platform_data/x86/intel_pmc_ipc.h b/include/linux/platform_data/x86/intel_pmc_ipc.h new file mode 100644 index 000000000000..85ea381e4a27 --- /dev/null +++ b/include/linux/platform_data/x86/intel_pmc_ipc.h @@ -0,0 +1,98 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Intel Core SoC Power Management Controller Header File + * + * Copyright (c) 2025, Intel Corporation. + * All Rights Reserved. + * + */ +#ifndef INTEL_PMC_IPC_H +#define INTEL_PMC_IPC_H +#include <linux/acpi.h> +#include <linux/cleanup.h> + +#define IPC_SOC_REGISTER_ACCESS 0xAA +#define IPC_SOC_SUB_CMD_READ 0x00 +#define IPC_SOC_SUB_CMD_WRITE 0x01 +#define PMC_IPCS_PARAM_COUNT 7 +#define VALID_IPC_RESPONSE 5 + +struct pmc_ipc_cmd { + u32 cmd; + u32 sub_cmd; + u32 size; + u32 wbuf[4]; +}; + +struct pmc_ipc_rbuf { + u32 buf[4]; +}; + +/** + * intel_pmc_ipc() - PMC IPC Mailbox accessor + * @ipc_cmd: Prepared input command to send + * @rbuf: Allocated array for returned IPC data + * + * Return: 0 on success. Non-zero on mailbox error + */ +static inline int intel_pmc_ipc(struct pmc_ipc_cmd *ipc_cmd, struct pmc_ipc_rbuf *rbuf) +{ +#ifdef CONFIG_ACPI + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object params[PMC_IPCS_PARAM_COUNT] = { + {.type = ACPI_TYPE_INTEGER,}, + {.type = ACPI_TYPE_INTEGER,}, + {.type = ACPI_TYPE_INTEGER,}, + {.type = ACPI_TYPE_INTEGER,}, + {.type = ACPI_TYPE_INTEGER,}, + {.type = ACPI_TYPE_INTEGER,}, + {.type = ACPI_TYPE_INTEGER,}, + }; + struct acpi_object_list arg_list = { PMC_IPCS_PARAM_COUNT, params }; + int status; + + if (!ipc_cmd || !rbuf) + return -EINVAL; + + /* + * 0: IPC Command + * 1: IPC Sub Command + * 2: Size + * 3-6: Write Buffer for offset + */ + params[0].integer.value = ipc_cmd->cmd; + params[1].integer.value = ipc_cmd->sub_cmd; + params[2].integer.value = ipc_cmd->size; + params[3].integer.value = ipc_cmd->wbuf[0]; + params[4].integer.value = ipc_cmd->wbuf[1]; + params[5].integer.value = ipc_cmd->wbuf[2]; + params[6].integer.value = ipc_cmd->wbuf[3]; + + status = acpi_evaluate_object(NULL, "\\IPCS", &arg_list, &buffer); + if (ACPI_FAILURE(status)) + return -ENODEV; + + union acpi_object *obj __free(kfree) = buffer.pointer; + + if (obj && obj->type == ACPI_TYPE_PACKAGE && + obj->package.count == VALID_IPC_RESPONSE) { + const union acpi_object *objs = obj->package.elements; + + if ((u8)objs[0].integer.value != 0) + return -EINVAL; + + rbuf->buf[0] = objs[1].integer.value; + rbuf->buf[1] = objs[2].integer.value; + rbuf->buf[2] = objs[3].integer.value; + rbuf->buf[3] = objs[4].integer.value; + } else { + return -EINVAL; + } + + return 0; +#else + return -ENODEV; +#endif /* CONFIG_ACPI */ +} + +#endif /* INTEL_PMC_IPC_H */ diff --git a/include/linux/platform_data/x86/intel_scu_ipc.h b/include/linux/platform_data/x86/intel_scu_ipc.h new file mode 100644 index 000000000000..b287627759f7 --- /dev/null +++ b/include/linux/platform_data/x86/intel_scu_ipc.h @@ -0,0 +1,72 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __PLATFORM_X86_INTEL_SCU_IPC_H_ +#define __PLATFORM_X86_INTEL_SCU_IPC_H_ + +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/types.h> + +struct device; +struct module; + +struct intel_scu_ipc_dev; + +/** + * struct intel_scu_ipc_data - Data used to configure SCU IPC + * @mem: Base address of SCU IPC MMIO registers + * @irq: The IRQ number used for SCU (optional) + */ +struct intel_scu_ipc_data { + struct resource mem; + int irq; +}; + +struct intel_scu_ipc_dev * +__intel_scu_ipc_register(struct device *parent, + const struct intel_scu_ipc_data *scu_data, + struct module *owner); + +#define intel_scu_ipc_register(parent, scu_data) \ + __intel_scu_ipc_register(parent, scu_data, THIS_MODULE) + +void intel_scu_ipc_unregister(struct intel_scu_ipc_dev *scu); + +struct intel_scu_ipc_dev * +__devm_intel_scu_ipc_register(struct device *parent, + const struct intel_scu_ipc_data *scu_data, + struct module *owner); + +#define devm_intel_scu_ipc_register(parent, scu_data) \ + __devm_intel_scu_ipc_register(parent, scu_data, THIS_MODULE) + +struct intel_scu_ipc_dev *intel_scu_ipc_dev_get(void); +void intel_scu_ipc_dev_put(struct intel_scu_ipc_dev *scu); +struct intel_scu_ipc_dev *devm_intel_scu_ipc_dev_get(struct device *dev); + +int intel_scu_ipc_dev_ioread8(struct intel_scu_ipc_dev *scu, u16 addr, + u8 *data); +int intel_scu_ipc_dev_iowrite8(struct intel_scu_ipc_dev *scu, u16 addr, + u8 data); +int intel_scu_ipc_dev_readv(struct intel_scu_ipc_dev *scu, u16 *addr, + u8 *data, size_t len); +int intel_scu_ipc_dev_writev(struct intel_scu_ipc_dev *scu, u16 *addr, + u8 *data, size_t len); + +int intel_scu_ipc_dev_update(struct intel_scu_ipc_dev *scu, u16 addr, + u8 data, u8 mask); + +int intel_scu_ipc_dev_simple_command(struct intel_scu_ipc_dev *scu, int cmd, + int sub); +int intel_scu_ipc_dev_command_with_size(struct intel_scu_ipc_dev *scu, int cmd, + int sub, const void *in, size_t inlen, + size_t size, void *out, size_t outlen); + +static inline int intel_scu_ipc_dev_command(struct intel_scu_ipc_dev *scu, int cmd, + int sub, const void *in, size_t inlen, + void *out, size_t outlen) +{ + return intel_scu_ipc_dev_command_with_size(scu, cmd, sub, in, inlen, + inlen, out, outlen); +} + +#endif diff --git a/include/linux/platform_data/x86/mlxcpld.h b/include/linux/platform_data/x86/mlxcpld.h deleted file mode 100644 index b08dcb183fca..000000000000 --- a/include/linux/platform_data/x86/mlxcpld.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * mlxcpld.h - Mellanox I2C multiplexer support in CPLD - * - * Copyright (c) 2016 Mellanox Technologies. All rights reserved. - * Copyright (c) 2016 Michael Shych <michaels@mellanox.com> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the names of the copyright holders nor the names of its - * contributors may be used to endorse or promote products derived from - * this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _LINUX_I2C_MLXCPLD_H -#define _LINUX_I2C_MLXCPLD_H - -/* Platform data for the CPLD I2C multiplexers */ - -/* mlxcpld_mux_plat_data - per mux data, used with i2c_register_board_info - * @adap_ids - adapter array - * @num_adaps - number of adapters - * @sel_reg_addr - mux select register offset in CPLD space - */ -struct mlxcpld_mux_plat_data { - int *adap_ids; - int num_adaps; - int sel_reg_addr; -}; - -#endif /* _LINUX_I2C_MLXCPLD_H */ diff --git a/include/linux/platform_data/x86/nvidia-wmi-ec-backlight.h b/include/linux/platform_data/x86/nvidia-wmi-ec-backlight.h new file mode 100644 index 000000000000..23d60130272c --- /dev/null +++ b/include/linux/platform_data/x86/nvidia-wmi-ec-backlight.h @@ -0,0 +1,76 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2020, NVIDIA CORPORATION. All rights reserved. + */ + +#ifndef __PLATFORM_DATA_X86_NVIDIA_WMI_EC_BACKLIGHT_H +#define __PLATFORM_DATA_X86_NVIDIA_WMI_EC_BACKLIGHT_H + +#define WMI_BRIGHTNESS_GUID "603E9613-EF25-4338-A3D0-C46177516DB7" + +/** + * enum wmi_brightness_method - WMI method IDs + * @WMI_BRIGHTNESS_METHOD_LEVEL: Get/Set EC brightness level status + * @WMI_BRIGHTNESS_METHOD_SOURCE: Get/Set EC Brightness Source + */ +enum wmi_brightness_method { + WMI_BRIGHTNESS_METHOD_LEVEL = 1, + WMI_BRIGHTNESS_METHOD_SOURCE = 2, + WMI_BRIGHTNESS_METHOD_MAX +}; + +/** + * enum wmi_brightness_mode - Operation mode for WMI-wrapped method + * @WMI_BRIGHTNESS_MODE_GET: Get the current brightness level/source. + * @WMI_BRIGHTNESS_MODE_SET: Set the brightness level. + * @WMI_BRIGHTNESS_MODE_GET_MAX_LEVEL: Get the maximum brightness level. This + * is only valid when the WMI method is + * %WMI_BRIGHTNESS_METHOD_LEVEL. + */ +enum wmi_brightness_mode { + WMI_BRIGHTNESS_MODE_GET = 0, + WMI_BRIGHTNESS_MODE_SET = 1, + WMI_BRIGHTNESS_MODE_GET_MAX_LEVEL = 2, + WMI_BRIGHTNESS_MODE_MAX +}; + +/** + * enum wmi_brightness_source - Backlight brightness control source selection + * @WMI_BRIGHTNESS_SOURCE_GPU: Backlight brightness is controlled by the GPU. + * @WMI_BRIGHTNESS_SOURCE_EC: Backlight brightness is controlled by the + * system's Embedded Controller (EC). + * @WMI_BRIGHTNESS_SOURCE_AUX: Backlight brightness is controlled over the + * DisplayPort AUX channel. + */ +enum wmi_brightness_source { + WMI_BRIGHTNESS_SOURCE_GPU = 1, + WMI_BRIGHTNESS_SOURCE_EC = 2, + WMI_BRIGHTNESS_SOURCE_AUX = 3, + WMI_BRIGHTNESS_SOURCE_MAX +}; + +/** + * struct wmi_brightness_args - arguments for the WMI-wrapped ACPI method + * @mode: Pass in an &enum wmi_brightness_mode value to select between + * getting or setting a value. + * @val: In parameter for value to set when using %WMI_BRIGHTNESS_MODE_SET + * mode. Not used in conjunction with %WMI_BRIGHTNESS_MODE_GET or + * %WMI_BRIGHTNESS_MODE_GET_MAX_LEVEL mode. + * @ret: Out parameter returning retrieved value when operating in + * %WMI_BRIGHTNESS_MODE_GET or %WMI_BRIGHTNESS_MODE_GET_MAX_LEVEL + * mode. Not used in %WMI_BRIGHTNESS_MODE_SET mode. + * @ignored: Padding; not used. The ACPI method expects a 24 byte params struct. + * + * This is the parameters structure for the WmiBrightnessNotify ACPI method as + * wrapped by WMI. The value passed in to @val or returned by @ret will be a + * brightness value when the WMI method ID is %WMI_BRIGHTNESS_METHOD_LEVEL, or + * an &enum wmi_brightness_source value with %WMI_BRIGHTNESS_METHOD_SOURCE. + */ +struct wmi_brightness_args { + u32 mode; + u32 val; + u32 ret; + u32 ignored[3]; +}; + +#endif diff --git a/include/linux/platform_data/x86/p2sb.h b/include/linux/platform_data/x86/p2sb.h new file mode 100644 index 000000000000..a1d5fddc8f13 --- /dev/null +++ b/include/linux/platform_data/x86/p2sb.h @@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Primary to Sideband (P2SB) bridge access support + */ + +#ifndef _PLATFORM_DATA_X86_P2SB_H +#define _PLATFORM_DATA_X86_P2SB_H + +#include <linux/errno.h> +#include <linux/kconfig.h> + +struct pci_bus; +struct resource; + +#if IS_BUILTIN(CONFIG_P2SB) + +int p2sb_bar(struct pci_bus *bus, unsigned int devfn, struct resource *mem); + +#else /* CONFIG_P2SB */ + +static inline int p2sb_bar(struct pci_bus *bus, unsigned int devfn, struct resource *mem) +{ + return -ENODEV; +} + +#endif /* CONFIG_P2SB is not set */ + +#endif /* _PLATFORM_DATA_X86_P2SB_H */ diff --git a/include/linux/platform_data/x86/pmc_atom.h b/include/linux/platform_data/x86/pmc_atom.h index e4905fe69c38..161e4bc1c9ee 100644 --- a/include/linux/platform_data/x86/pmc_atom.h +++ b/include/linux/platform_data/x86/pmc_atom.h @@ -1,21 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* - * Intel Atom SOC Power Management Controller Header File - * Copyright (c) 2014, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * + * Intel Atom SoC Power Management Controller Header File + * Copyright (c) 2014-2015,2022 Intel Corporation. */ #ifndef PMC_ATOM_H #define PMC_ATOM_H +#include <linux/bits.h> + /* ValleyView Power Control Unit PCI Device ID */ #define PCI_DEVICE_ID_VLV_PMC 0x0F1C /* CherryTrail Power Control Unit PCI Device ID */ @@ -50,13 +43,26 @@ BIT_ORED_DEDICATED_IRQ_GPSC | \ BIT_SHARED_IRQ_GPSS) +/* External clk generator settings */ +#define PMC_CLK_CTL_OFFSET 0x60 +#define PMC_CLK_CTL_SIZE 4 +#define PMC_CLK_NUM 6 +#define PMC_CLK_CTL_GATED_ON_D3 0x0 +#define PMC_CLK_CTL_FORCE_ON 0x1 +#define PMC_CLK_CTL_FORCE_OFF 0x2 +#define PMC_CLK_CTL_RESERVED 0x3 +#define PMC_MASK_CLK_CTL GENMASK(1, 0) +#define PMC_MASK_CLK_FREQ BIT(2) +#define PMC_CLK_FREQ_XTAL (0 << 2) /* 25 MHz */ +#define PMC_CLK_FREQ_PLL (1 << 2) /* 19.2 MHz */ + /* The timers accumulate time spent in sleep state */ #define PMC_S0IR_TMR 0x80 #define PMC_S0I1_TMR 0x84 #define PMC_S0I2_TMR 0x88 #define PMC_S0I3_TMR 0x8C #define PMC_S0_TMR 0x90 -/* Sleep state counter is in units of of 32us */ +/* Sleep state counter is in units of 32us */ #define PMC_TMR_SHIFT 5 /* Power status of power islands */ @@ -111,14 +117,14 @@ #define BIT_SCC_SDIO BIT(9) #define BIT_SCC_SDCARD BIT(10) #define BIT_SCC_MIPI BIT(11) -#define BIT_HDA BIT(12) +#define BIT_HDA BIT(12) /* CHT datasheet: reserved */ #define BIT_LPE BIT(13) #define BIT_OTG BIT(14) -#define BIT_USH BIT(15) -#define BIT_GBE BIT(16) -#define BIT_SATA BIT(17) -#define BIT_USB_EHCI BIT(18) -#define BIT_SEC BIT(19) +#define BIT_USH BIT(15) /* CHT datasheet: reserved */ +#define BIT_GBE BIT(16) /* CHT datasheet: reserved */ +#define BIT_SATA BIT(17) /* CHT datasheet: reserved */ +#define BIT_USB_EHCI BIT(18) /* CHT datasheet: XHCI! */ +#define BIT_SEC BIT(19) /* BYT datasheet: reserved */ #define BIT_PCIE_PORT0 BIT(20) #define BIT_PCIE_PORT1 BIT(21) #define BIT_PCIE_PORT2 BIT(22) @@ -148,11 +154,10 @@ #define ACPI_MMIO_REG_LEN 0x100 #define PM1_CNT 0x4 -#define SLEEP_TYPE_MASK 0xFFFFECFF +#define SLEEP_TYPE_MASK GENMASK(12, 10) #define SLEEP_TYPE_S5 0x1C00 -#define SLEEP_ENABLE 0x2000 +#define SLEEP_ENABLE BIT(13) extern int pmc_atom_read(int offset, u32 *value); -extern int pmc_atom_write(int offset, u32 value); #endif /* PMC_ATOM_H */ diff --git a/include/linux/platform_data/x86/pwm-lpss.h b/include/linux/platform_data/x86/pwm-lpss.h new file mode 100644 index 000000000000..f0349edb47f4 --- /dev/null +++ b/include/linux/platform_data/x86/pwm-lpss.h @@ -0,0 +1,60 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* Intel Low Power Subsystem PWM controller driver */ + +#ifndef __PLATFORM_DATA_X86_PWM_LPSS_H +#define __PLATFORM_DATA_X86_PWM_LPSS_H + +#include <linux/types.h> + +struct device; + +struct pwm_lpss_chip; + +struct pwm_lpss_boardinfo { + unsigned long clk_rate; + unsigned int npwm; + unsigned long base_unit_bits; + /* + * NOTE: + * Intel Broxton, Apollo Lake, and Gemini Lake have different programming flow. + * + * Initial Enable or First Activation + * 1. Program the base unit and on time divisor values. + * 2. Set the software update bit. + * 3. Poll in a loop on the PWMCTRL bit until software update bit is cleared.+ + * 4. Enable the PWM output by setting PWM Enable. + * 5. Repeat the above steps for the next PWM Module. + * + * Dynamic update while PWM is Enabled + * 1. Program the base unit and on-time divisor values. + * 2. Set the software update bit. + * 3. Repeat the above steps for the next PWM module. + * + * + After setting PWMCTRL register's SW update bit, hardware automatically + * deasserts the SW update bit after a brief delay. It was observed that + * setting of PWM enable is typically done via read-modify-write of the PWMCTRL + * register. If there is no/little delay between setting software update bit + * and setting enable bit via read-modify-write, it is possible that the read + * could return with software enable as 1. In that case, the last write to set + * enable to 1 could also set sw_update to 1. If this happens, sw_update gets + * stuck and the driver code can hang as it explicitly waits for sw_update bit + * to be 0 after setting the enable bit to 1. To avoid this race condition, + * SW should poll on the software update bit to make sure that it is 0 before + * doing the read-modify-write to set the enable bit to 1. + * + * Also, we noted that if sw_update bit was set in step #1 above then when it + * is set again in step #2, sw_update bit never gets cleared and the flow hangs. + * As such, we need to make sure that sw_update bit is 0 when doing step #1. + */ + bool bypass; + /* + * On some devices the _PS0/_PS3 AML code of the GPU (GFX0) device + * messes with the PWM0 controllers state, + */ + bool other_devices_aml_touches_pwm_regs; +}; + +struct pwm_chip *devm_pwm_lpss_probe(struct device *dev, void __iomem *base, + const struct pwm_lpss_boardinfo *info); + +#endif /* __PLATFORM_DATA_X86_PWM_LPSS_H */ diff --git a/include/linux/platform_data/x86/simatic-ipc-base.h b/include/linux/platform_data/x86/simatic-ipc-base.h new file mode 100644 index 000000000000..2d7f7120ba6b --- /dev/null +++ b/include/linux/platform_data/x86/simatic-ipc-base.h @@ -0,0 +1,31 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Siemens SIMATIC IPC drivers + * + * Copyright (c) Siemens AG, 2018-2023 + * + * Authors: + * Henning Schild <henning.schild@siemens.com> + * Gerd Haeussler <gerd.haeussler.ext@siemens.com> + */ + +#ifndef __PLATFORM_DATA_X86_SIMATIC_IPC_BASE_H +#define __PLATFORM_DATA_X86_SIMATIC_IPC_BASE_H + +#include <linux/types.h> + +#define SIMATIC_IPC_DEVICE_NONE 0 +#define SIMATIC_IPC_DEVICE_227D 1 +#define SIMATIC_IPC_DEVICE_427E 2 +#define SIMATIC_IPC_DEVICE_127E 3 +#define SIMATIC_IPC_DEVICE_227E 4 +#define SIMATIC_IPC_DEVICE_227G 5 +#define SIMATIC_IPC_DEVICE_BX_21A 6 +#define SIMATIC_IPC_DEVICE_BX_39A 7 +#define SIMATIC_IPC_DEVICE_BX_59A 8 + +struct simatic_ipc_platform { + u8 devmode; +}; + +#endif /* __PLATFORM_DATA_X86_SIMATIC_IPC_BASE_H */ diff --git a/include/linux/platform_data/x86/simatic-ipc.h b/include/linux/platform_data/x86/simatic-ipc.h new file mode 100644 index 000000000000..8d8b3b919674 --- /dev/null +++ b/include/linux/platform_data/x86/simatic-ipc.h @@ -0,0 +1,79 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Siemens SIMATIC IPC drivers + * + * Copyright (c) Siemens AG, 2018-2023 + * + * Authors: + * Henning Schild <henning.schild@siemens.com> + * Gerd Haeussler <gerd.haeussler.ext@siemens.com> + */ + +#ifndef __PLATFORM_DATA_X86_SIMATIC_IPC_H +#define __PLATFORM_DATA_X86_SIMATIC_IPC_H + +#include <linux/dmi.h> +#include <linux/platform_data/x86/simatic-ipc-base.h> + +#define SIMATIC_IPC_DMI_ENTRY_OEM 129 +/* binary type */ +#define SIMATIC_IPC_DMI_TYPE 0xff +#define SIMATIC_IPC_DMI_GROUP 0x05 +#define SIMATIC_IPC_DMI_ENTRY 0x02 +#define SIMATIC_IPC_DMI_TID 0x02 + +enum simatic_ipc_station_ids { + SIMATIC_IPC_INVALID_STATION_ID = 0, + SIMATIC_IPC_IPC227D = 0x00000501, + SIMATIC_IPC_IPC427D = 0x00000701, + SIMATIC_IPC_IPC227E = 0x00000901, + SIMATIC_IPC_IPC277E = 0x00000902, + SIMATIC_IPC_IPC427E = 0x00000A01, + SIMATIC_IPC_IPC477E = 0x00000A02, + SIMATIC_IPC_IPC127E = 0x00000D01, + SIMATIC_IPC_IPC227G = 0x00000F01, + SIMATIC_IPC_IPC277G = 0x00000F02, + SIMATIC_IPC_IPCBX_39A = 0x00001001, + SIMATIC_IPC_IPCPX_39A = 0x00001002, + SIMATIC_IPC_IPCBX_21A = 0x00001101, + SIMATIC_IPC_IPCBX_56A = 0x00001201, + SIMATIC_IPC_IPCBX_59A = 0x00001202, +}; + +static inline u32 simatic_ipc_get_station_id(u8 *data, int max_len) +{ + struct { + u8 type; /* type (0xff = binary) */ + u8 len; /* len of data entry */ + u8 group; + u8 entry; + u8 tid; + __le32 station_id; /* station id (LE) */ + } __packed * data_entry = (void *)data + sizeof(struct dmi_header); + + while ((u8 *)data_entry < data + max_len) { + if (data_entry->type == SIMATIC_IPC_DMI_TYPE && + data_entry->len == sizeof(*data_entry) && + data_entry->group == SIMATIC_IPC_DMI_GROUP && + data_entry->entry == SIMATIC_IPC_DMI_ENTRY && + data_entry->tid == SIMATIC_IPC_DMI_TID) { + return le32_to_cpu(data_entry->station_id); + } + data_entry = (void *)((u8 *)(data_entry) + data_entry->len); + } + + return SIMATIC_IPC_INVALID_STATION_ID; +} + +static inline void +simatic_ipc_find_dmi_entry_helper(const struct dmi_header *dh, void *_data) +{ + u32 *id = _data; + + if (dh->type != SIMATIC_IPC_DMI_ENTRY_OEM) + return; + + *id = simatic_ipc_get_station_id((u8 *)dh, dh->length); +} + +#endif /* __PLATFORM_DATA_X86_SIMATIC_IPC_H */ diff --git a/include/linux/platform_data/x86/soc.h b/include/linux/platform_data/x86/soc.h new file mode 100644 index 000000000000..f981907a5cb0 --- /dev/null +++ b/include/linux/platform_data/x86/soc.h @@ -0,0 +1,70 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Helpers for Intel SoC model detection + * + * Copyright (c) 2019, Intel Corporation. + */ + +#ifndef __PLATFORM_DATA_X86_SOC_H +#define __PLATFORM_DATA_X86_SOC_H + +#include <linux/types.h> + +#if IS_ENABLED(CONFIG_X86) + +#include <linux/mod_devicetable.h> + +#include <asm/cpu_device_id.h> + +#define SOC_INTEL_IS_CPU(soc, type) \ +static inline bool soc_intel_is_##soc(void) \ +{ \ + static const struct x86_cpu_id soc##_cpu_ids[] = { \ + X86_MATCH_VFM(type, NULL), \ + {} \ + }; \ + const struct x86_cpu_id *id; \ + \ + id = x86_match_cpu(soc##_cpu_ids); \ + if (id) \ + return true; \ + return false; \ +} + +SOC_INTEL_IS_CPU(byt, INTEL_ATOM_SILVERMONT); +SOC_INTEL_IS_CPU(cht, INTEL_ATOM_AIRMONT); +SOC_INTEL_IS_CPU(apl, INTEL_ATOM_GOLDMONT); +SOC_INTEL_IS_CPU(glk, INTEL_ATOM_GOLDMONT_PLUS); +SOC_INTEL_IS_CPU(cml, INTEL_KABYLAKE_L); + +#undef SOC_INTEL_IS_CPU + +#else /* IS_ENABLED(CONFIG_X86) */ + +static inline bool soc_intel_is_byt(void) +{ + return false; +} + +static inline bool soc_intel_is_cht(void) +{ + return false; +} + +static inline bool soc_intel_is_apl(void) +{ + return false; +} + +static inline bool soc_intel_is_glk(void) +{ + return false; +} + +static inline bool soc_intel_is_cml(void) +{ + return false; +} +#endif /* IS_ENABLED(CONFIG_X86) */ + +#endif /* __PLATFORM_DATA_X86_SOC_H */ diff --git a/include/linux/platform_data/intel-spi.h b/include/linux/platform_data/x86/spi-intel.h index 942b0c3f8f08..a512ec37abbb 100644 --- a/include/linux/platform_data/intel-spi.h +++ b/include/linux/platform_data/x86/spi-intel.h @@ -1,31 +1,31 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Intel PCH/PCU SPI flash driver. * * Copyright (C) 2016, Intel Corporation * Author: Mika Westerberg <mika.westerberg@linux.intel.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ -#ifndef INTEL_SPI_PDATA_H -#define INTEL_SPI_PDATA_H +#ifndef SPI_INTEL_PDATA_H +#define SPI_INTEL_PDATA_H enum intel_spi_type { INTEL_SPI_BYT = 1, INTEL_SPI_LPT, INTEL_SPI_BXT, + INTEL_SPI_CNL, }; /** * struct intel_spi_boardinfo - Board specific data for Intel SPI driver * @type: Type which this controller is compatible with - * @writeable: The chip is writeable + * @set_writeable: Try to make the chip writeable (optional) + * @data: Data to be passed to @set_writeable can be %NULL */ struct intel_spi_boardinfo { enum intel_spi_type type; - bool writeable; + bool (*set_writeable)(void __iomem *base, void *data); + void *data; }; -#endif /* INTEL_SPI_PDATA_H */ +#endif /* SPI_INTEL_PDATA_H */ diff --git a/include/linux/platform_data/xilinx-ll-temac.h b/include/linux/platform_data/xilinx-ll-temac.h new file mode 100644 index 000000000000..f4a68136afa6 --- /dev/null +++ b/include/linux/platform_data/xilinx-ll-temac.h @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __LINUX_XILINX_LL_TEMAC_H +#define __LINUX_XILINX_LL_TEMAC_H + +#include <linux/if_ether.h> +#include <linux/phy.h> +#include <linux/spinlock.h> + +struct ll_temac_platform_data { + bool txcsum; /* Enable/disable TX checksum */ + bool rxcsum; /* Enable/disable RX checksum */ + u8 mac_addr[ETH_ALEN]; /* MAC address (6 bytes) */ + /* Clock frequency for input to MDIO clock generator */ + u32 mdio_clk_freq; + unsigned long long mdio_bus_id; /* Unique id for MDIO bus */ + int phy_addr; /* Address of the PHY to connect to */ + phy_interface_t phy_interface; /* PHY interface mode */ + bool reg_little_endian; /* Little endian TEMAC register access */ + bool dma_little_endian; /* Little endian DMA register access */ + /* Pre-initialized mutex to use for synchronizing indirect + * register access. When using both interfaces of a single + * TEMAC IP block, the same mutex should be passed here, as + * they share the same DCR bus bridge. + */ + spinlock_t *indirect_lock; + /* DMA channel control setup */ + u8 tx_irq_timeout; /* TX Interrupt Delay Time-out */ + u8 tx_irq_count; /* TX Interrupt Coalescing Threshold Count */ + u8 rx_irq_timeout; /* RX Interrupt Delay Time-out */ + u8 rx_irq_count; /* RX Interrupt Coalescing Threshold Count */ +}; + +#endif /* __LINUX_XILINX_LL_TEMAC_H */ diff --git a/include/linux/platform_data/xtalk-bridge.h b/include/linux/platform_data/xtalk-bridge.h new file mode 100644 index 000000000000..51e5001f2c05 --- /dev/null +++ b/include/linux/platform_data/xtalk-bridge.h @@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * SGI PCI Xtalk Bridge + */ + +#ifndef PLATFORM_DATA_XTALK_BRIDGE_H +#define PLATFORM_DATA_XTALK_BRIDGE_H + +#include <asm/sn/types.h> + +struct xtalk_bridge_platform_data { + struct resource mem; + struct resource io; + unsigned long bridge_addr; + unsigned long intr_addr; + unsigned long mem_offset; + unsigned long io_offset; + nasid_t nasid; + int masterwid; +}; + +#endif /* PLATFORM_DATA_XTALK_BRIDGE_H */ diff --git a/include/linux/platform_data/zforce_ts.h b/include/linux/platform_data/zforce_ts.h deleted file mode 100644 index 7bdece8ef33e..000000000000 --- a/include/linux/platform_data/zforce_ts.h +++ /dev/null @@ -1,23 +0,0 @@ -/* drivers/input/touchscreen/zforce.c - * - * Copyright (C) 2012-2013 MundoReader S.L. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef _LINUX_INPUT_ZFORCE_TS_H -#define _LINUX_INPUT_ZFORCE_TS_H - -struct zforce_ts_platdata { - unsigned int x_max; - unsigned int y_max; -}; - -#endif /* _LINUX_INPUT_ZFORCE_TS_H */ |