diff options
Diffstat (limited to 'include/linux/platform_data')
119 files changed, 1307 insertions, 2494 deletions
diff --git a/include/linux/platform_data/ad5449.h b/include/linux/platform_data/ad5449.h deleted file mode 100644 index d687ef5726c2..000000000000 --- a/include/linux/platform_data/ad5449.h +++ /dev/null @@ -1,39 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * AD5415, AD5426, AD5429, AD5432, AD5439, AD5443, AD5449 Digital to Analog - * Converter driver. - * - * Copyright 2012 Analog Devices Inc. - * Author: Lars-Peter Clausen <lars@metafoo.de> - */ - -#ifndef __LINUX_PLATFORM_DATA_AD5449_H__ -#define __LINUX_PLATFORM_DATA_AD5449_H__ - -/** - * enum ad5449_sdo_mode - AD5449 SDO pin configuration - * @AD5449_SDO_DRIVE_FULL: Drive the SDO pin with full strength. - * @AD5449_SDO_DRIVE_WEAK: Drive the SDO pin with not full strength. - * @AD5449_SDO_OPEN_DRAIN: Operate the SDO pin in open-drain mode. - * @AD5449_SDO_DISABLED: Disable the SDO pin, in this mode it is not possible to - * read back from the device. - */ -enum ad5449_sdo_mode { - AD5449_SDO_DRIVE_FULL = 0x0, - AD5449_SDO_DRIVE_WEAK = 0x1, - AD5449_SDO_OPEN_DRAIN = 0x2, - AD5449_SDO_DISABLED = 0x3, -}; - -/** - * struct ad5449_platform_data - Platform data for the ad5449 DAC driver - * @sdo_mode: SDO pin mode - * @hardware_clear_to_midscale: Whether asserting the hardware CLR pin sets the - * outputs to midscale (true) or to zero scale(false). - */ -struct ad5449_platform_data { - enum ad5449_sdo_mode sdo_mode; - bool hardware_clear_to_midscale; -}; - -#endif diff --git a/include/linux/platform_data/amd_qdma.h b/include/linux/platform_data/amd_qdma.h new file mode 100644 index 000000000000..967a6ef31cf9 --- /dev/null +++ b/include/linux/platform_data/amd_qdma.h @@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2023-2024, Advanced Micro Devices, Inc. + */ + +#ifndef _PLATDATA_AMD_QDMA_H +#define _PLATDATA_AMD_QDMA_H + +#include <linux/dmaengine.h> + +/** + * struct qdma_queue_info - DMA queue information. This information is used to + * match queue when DMA channel is requested + * @dir: Channel transfer direction + */ +struct qdma_queue_info { + enum dma_transfer_direction dir; +}; + +#define QDMA_FILTER_PARAM(qinfo) ((void *)(qinfo)) + +struct dma_slave_map; + +/** + * struct qdma_platdata - Platform specific data for QDMA engine + * @max_mm_channels: Maximum number of MM DMA channels in each direction + * @device_map: DMA slave map + * @irq_index: The index of first IRQ + * @dma_dev: The device pointer for dma operations + */ +struct qdma_platdata { + u32 max_mm_channels; + u32 irq_index; + struct dma_slave_map *device_map; + struct device *dma_dev; +}; + +#endif /* _PLATDATA_AMD_QDMA_H */ diff --git a/include/linux/platform_data/amd_xdma.h b/include/linux/platform_data/amd_xdma.h new file mode 100644 index 000000000000..b5e23e14bac8 --- /dev/null +++ b/include/linux/platform_data/amd_xdma.h @@ -0,0 +1,34 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2022, Advanced Micro Devices, Inc. + */ + +#ifndef _PLATDATA_AMD_XDMA_H +#define _PLATDATA_AMD_XDMA_H + +#include <linux/dmaengine.h> + +/** + * struct xdma_chan_info - DMA channel information + * This information is used to match channel when request dma channel + * @dir: Channel transfer direction + */ +struct xdma_chan_info { + enum dma_transfer_direction dir; +}; + +#define XDMA_FILTER_PARAM(chan_info) ((void *)(chan_info)) + +struct dma_slave_map; + +/** + * struct xdma_platdata - platform specific data for XDMA engine + * @max_dma_channels: Maximum dma channels in each direction + */ +struct xdma_platdata { + u32 max_dma_channels; + u32 device_map_cnt; + struct dma_slave_map *device_map; +}; + +#endif /* _PLATDATA_AMD_XDMA_H */ diff --git a/include/linux/platform_data/asoc-palm27x.h b/include/linux/platform_data/asoc-palm27x.h deleted file mode 100644 index 22b69a393a57..000000000000 --- a/include/linux/platform_data/asoc-palm27x.h +++ /dev/null @@ -1,9 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _INCLUDE_PALMASOC_H_ -#define _INCLUDE_PALMASOC_H_ - -struct palm27x_asoc_info { - int jack_gpio; -}; - -#endif diff --git a/include/linux/platform_data/asoc-poodle.h b/include/linux/platform_data/asoc-poodle.h deleted file mode 100644 index 2052fad55c5c..000000000000 --- a/include/linux/platform_data/asoc-poodle.h +++ /dev/null @@ -1,16 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __LINUX_PLATFORM_DATA_POODLE_AUDIO -#define __LINUX_PLATFORM_DATA_POODLE_AUDIO - -/* locomo is not a proper gpio driver, and uses its own api */ -struct poodle_audio_platform_data { - struct device *locomo_dev; - - int gpio_amp_on; - int gpio_mute_l; - int gpio_mute_r; - int gpio_232vcc_on; - int gpio_jk_b; -}; - -#endif diff --git a/include/linux/platform_data/asoc-pxa.h b/include/linux/platform_data/asoc-pxa.h index 327454cd8246..7b5b9e20fbf5 100644 --- a/include/linux/platform_data/asoc-pxa.h +++ b/include/linux/platform_data/asoc-pxa.h @@ -27,5 +27,6 @@ typedef struct { } pxa2xx_audio_ops_t; extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops); +extern void pxa27x_configure_ac97reset(int reset_gpio, bool to_gpio); #endif diff --git a/include/linux/platform_data/asoc-s3c.h b/include/linux/platform_data/asoc-s3c.h index f9c00f839e9f..085dd8e8af76 100644 --- a/include/linux/platform_data/asoc-s3c.h +++ b/include/linux/platform_data/asoc-s3c.h @@ -13,8 +13,6 @@ #include <linux/dmaengine.h> -extern void s3c64xx_ac97_setup_gpio(int); - struct samsung_i2s_type { /* If the Primary DAI has 5.1 Channels */ #define QUIRK_PRI_6CHAN (1 << 0) diff --git a/include/linux/platform_data/asoc-s3c24xx_simtec.h b/include/linux/platform_data/asoc-s3c24xx_simtec.h deleted file mode 100644 index 1a7efc98d108..000000000000 --- a/include/linux/platform_data/asoc-s3c24xx_simtec.h +++ /dev/null @@ -1,30 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * Simtec Audio support. -*/ - -/** - * struct s3c24xx_audio_simtec_pdata - platform data for simtec audio - * @use_mpllin: Select codec clock from MPLLin - * @output_cdclk: Need to output CDCLK to the codec - * @have_mic: Set if we have a MIC socket - * @have_lout: Set if we have a LineOut socket - * @amp_gpio: GPIO pin to enable the AMP - * @amp_gain: Option GPIO to control AMP gain - */ -struct s3c24xx_audio_simtec_pdata { - unsigned int use_mpllin:1; - unsigned int output_cdclk:1; - - unsigned int have_mic:1; - unsigned int have_lout:1; - - int amp_gpio; - int amp_gain[2]; - - void (*startup)(void); -}; diff --git a/include/linux/platform_data/asoc-ux500-msp.h b/include/linux/platform_data/asoc-ux500-msp.h deleted file mode 100644 index b8d0f730dda8..000000000000 --- a/include/linux/platform_data/asoc-ux500-msp.h +++ /dev/null @@ -1,20 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - */ - -#ifndef __MSP_H -#define __MSP_H - -#include <linux/platform_data/dma-ste-dma40.h> - -/* Platform data structure for a MSP I2S-device */ -struct msp_i2s_platform_data { - int id; - struct stedma40_chan_cfg *msp_i2s_dma_rx; - struct stedma40_chan_cfg *msp_i2s_dma_tx; -}; - -#endif diff --git a/include/linux/platform_data/ata-samsung_cf.h b/include/linux/platform_data/ata-samsung_cf.h deleted file mode 100644 index fccf969dc4da..000000000000 --- a/include/linux/platform_data/ata-samsung_cf.h +++ /dev/null @@ -1,31 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Samsung CF-ATA platform_device info -*/ - -#ifndef __ATA_SAMSUNG_CF_H -#define __ATA_SAMSUNG_CF_H __FILE__ - -/** - * struct s3c_ide_platdata - S3C IDE driver platform data. - * @setup_gpio: Setup the external GPIO pins to the right state for data - * transfer in true-ide mode. - */ -struct s3c_ide_platdata { - void (*setup_gpio)(void); -}; - -/* - * s3c_ide_set_platdata() - Setup the platform specifc data for IDE driver. - * @pdata: Platform data for IDE driver. - */ -extern void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata); - -/* architecture-specific IDE configuration */ -extern void s3c64xx_ide_setup_gpio(void); -extern void s5pv210_ide_setup_gpio(void); - -#endif /*__ATA_SAMSUNG_CF_H */ diff --git a/include/linux/platform_data/bcmgenet.h b/include/linux/platform_data/bcmgenet.h deleted file mode 100644 index d8f8738629d2..000000000000 --- a/include/linux/platform_data/bcmgenet.h +++ /dev/null @@ -1,19 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __LINUX_PLATFORM_DATA_BCMGENET_H__ -#define __LINUX_PLATFORM_DATA_BCMGENET_H__ - -#include <linux/types.h> -#include <linux/if_ether.h> -#include <linux/phy.h> - -struct bcmgenet_platform_data { - bool mdio_enabled; - phy_interface_t phy_interface; - int phy_address; - int phy_speed; - int phy_duplex; - u8 mac_address[ETH_ALEN]; - int genet_version; -}; - -#endif diff --git a/include/linux/platform_data/bd6107.h b/include/linux/platform_data/bd6107.h index 54a06a4d2618..596ca4f95cfa 100644 --- a/include/linux/platform_data/bd6107.h +++ b/include/linux/platform_data/bd6107.h @@ -8,7 +8,7 @@ struct device; struct bd6107_platform_data { - struct device *fbdev; + struct device *dev; unsigned int def_value; }; diff --git a/include/linux/platform_data/brcmfmac.h b/include/linux/platform_data/brcmfmac.h index f922a192fe58..ec99b7b73d1d 100644 --- a/include/linux/platform_data/brcmfmac.h +++ b/include/linux/platform_data/brcmfmac.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 201 Broadcom Corporation + * Copyright (c) 2016 Broadcom Corporation * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above diff --git a/include/linux/platform_data/clk-davinci-pll.h b/include/linux/platform_data/clk-davinci-pll.h deleted file mode 100644 index e55dab1d578b..000000000000 --- a/include/linux/platform_data/clk-davinci-pll.h +++ /dev/null @@ -1,21 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * PLL clock driver for TI Davinci SoCs - * - * Copyright (C) 2018 David Lechner <david@lechnology.com> - */ - -#ifndef __LINUX_PLATFORM_DATA_CLK_DAVINCI_PLL_H__ -#define __LINUX_PLATFORM_DATA_CLK_DAVINCI_PLL_H__ - -#include <linux/regmap.h> - -/** - * davinci_pll_platform_data - * @cfgchip: CFGCHIP syscon regmap - */ -struct davinci_pll_platform_data { - struct regmap *cfgchip; -}; - -#endif /* __LINUX_PLATFORM_DATA_CLK_DAVINCI_PLL_H__ */ diff --git a/include/linux/platform_data/clk-s3c2410.h b/include/linux/platform_data/clk-s3c2410.h deleted file mode 100644 index 7eb1cfa5409b..000000000000 --- a/include/linux/platform_data/clk-s3c2410.h +++ /dev/null @@ -1,19 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (c) 2020 Krzysztof Kozlowski <krzk@kernel.org> - */ - -#ifndef __LINUX_PLATFORM_DATA_CLK_S3C2410_H_ -#define __LINUX_PLATFORM_DATA_CLK_S3C2410_H_ - -/** - * struct s3c2410_clk_platform_data - platform data for S3C2410 clock driver - * - * @modify_misccr: Function to modify the MISCCR and return the new value - */ -struct s3c2410_clk_platform_data { - unsigned int (*modify_misccr)(unsigned int clr, unsigned int chg); -}; - -#endif /* __LINUX_PLATFORM_DATA_CLK_S3C2410_H_ */ - diff --git a/include/linux/platform_data/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h index 5744a2d746aa..69294f79cc88 100644 --- a/include/linux/platform_data/cros_ec_commands.h +++ b/include/linux/platform_data/cros_ec_commands.h @@ -1082,7 +1082,7 @@ struct ec_params_get_cmd_versions_v1 { } __ec_align2; /** - * struct ec_response_get_cmd_version - Response to the get command versions. + * struct ec_response_get_cmd_versions - Response to the get command versions. * @version_mask: Mask of supported versions; use EC_VER_MASK() to compare with * a desired version. */ @@ -1300,8 +1300,50 @@ enum ec_feature_code { * mux. */ EC_FEATURE_TYPEC_MUX_REQUIRE_AP_ACK = 43, - /* The MCU is a System Companion Processor (SCP) 2nd Core. */ - EC_FEATURE_SCP_C1 = 45, + /* + * The EC supports entering and residing in S4. + */ + EC_FEATURE_S4_RESIDENCY = 44, + /* + * The EC supports the AP directing mux sets for the board. + */ + EC_FEATURE_TYPEC_AP_MUX_SET = 45, + /* + * The EC supports the AP composing VDMs for us to send. + */ + EC_FEATURE_TYPEC_AP_VDM_SEND = 46, + /* + * The EC supports system safe mode panic recovery. + */ + EC_FEATURE_SYSTEM_SAFE_MODE = 47, + /* + * The EC will reboot on runtime assertion failures. + */ + EC_FEATURE_ASSERT_REBOOTS = 48, + /* + * The EC image is built with tokenized logging enabled. + */ + EC_FEATURE_TOKENIZED_LOGGING = 49, + /* + * The EC supports triggering an STB dump. + */ + EC_FEATURE_AMD_STB_DUMP = 50, + /* + * The EC supports memory dump commands. + */ + EC_FEATURE_MEMORY_DUMP = 51, + /* + * The EC supports DP2.1 capability + */ + EC_FEATURE_TYPEC_DP2_1 = 52, + /* + * The MCU is System Companion Processor Core 1 + */ + EC_FEATURE_SCP_C1 = 53, + /* + * The EC supports UCSI PPM. + */ + EC_FEATURE_UCSI_PPM = 54, }; #define EC_FEATURE_MASK_0(event_code) BIT(event_code % 32) @@ -1783,6 +1825,16 @@ struct ec_response_pwm_get_duty { uint16_t duty; /* Duty cycle, EC_PWM_MAX_DUTY = 100% */ } __ec_align2; +#define EC_CMD_PWM_GET_FAN_DUTY 0x0027 + +struct ec_params_pwm_get_fan_duty { + uint8_t fan_idx; +} __ec_align1; + +struct ec_response_pwm_get_fan_duty { + uint32_t percent; /* Percentage of duty cycle, ranging from 0 ~ 100 */ +} __ec_align4; + /*****************************************************************************/ /* * Lightbar commands. This looks worse than it is. Since we only use one HOST @@ -2346,6 +2398,12 @@ enum motionsense_command { */ MOTIONSENSE_CMD_SENSOR_SCALE = 18, + /* + * Activity management + * Retrieve current status of given activity. + */ + MOTIONSENSE_CMD_GET_ACTIVITY = 20, + /* Number of motionsense sub-commands. */ MOTIONSENSE_NUM_CMDS }; @@ -2405,6 +2463,11 @@ enum motionsensor_orientation { MOTIONSENSE_ORIENTATION_UNKNOWN = 4, }; +struct ec_response_activity_data { + uint8_t activity; /* motionsensor_activity */ + uint8_t state; +} __ec_todo_packed; + struct ec_response_motion_sensor_data { /* Flags for each sensor. */ uint8_t flags; @@ -2418,8 +2481,7 @@ struct ec_response_motion_sensor_data { uint32_t timestamp; }; struct __ec_todo_unpacked { - uint8_t activity; /* motionsensor_activity */ - uint8_t state; + struct ec_response_activity_data activity_data; int16_t add_info[2]; }; }; @@ -2452,6 +2514,7 @@ enum motionsensor_activity { MOTIONSENSE_ACTIVITY_SIG_MOTION = 1, MOTIONSENSE_ACTIVITY_DOUBLE_TAP = 2, MOTIONSENSE_ACTIVITY_ORIENTATION = 3, + MOTIONSENSE_ACTIVITY_BODY_DETECTION = 4, }; struct ec_motion_sense_activity { @@ -2629,6 +2692,7 @@ struct ec_params_motion_sense { uint32_t max_data_vector; } fifo_read; + /* Used for MOTIONSENSE_CMD_SET_ACTIVITY */ struct ec_motion_sense_activity set_activity; /* Used for MOTIONSENSE_CMD_LID_ANGLE */ @@ -2674,6 +2738,12 @@ struct ec_params_motion_sense { */ int16_t hys_degree; } tablet_mode_threshold; + + /* Used for MOTIONSENSE_CMD_GET_ACTIVITY */ + struct __ec_todo_unpacked { + uint8_t sensor_num; + uint8_t activity; /* enum motionsensor_activity */ + } get_activity; }; } __ec_todo_packed; @@ -2691,7 +2761,7 @@ struct ec_response_motion_sense { * Sensor data is truncated if response_max is too small * for holding all the data. */ - struct ec_response_motion_sensor_data sensor[0]; + DECLARE_FLEX_ARRAY(struct ec_response_motion_sensor_data, sensor); } dump; /* Used for MOTIONSENSE_CMD_INFO. */ @@ -2791,6 +2861,10 @@ struct ec_response_motion_sense { uint16_t hys_degree; } tablet_mode_threshold; + /* USED for MOTIONSENSE_CMD_GET_ACTIVITY. */ + struct __ec_todo_unpacked { + uint8_t state; + } get_activity; }; } __ec_todo_packed; @@ -3063,14 +3137,31 @@ struct ec_params_thermal_set_threshold_v1 { /****************************************************************************/ -/* Toggle automatic fan control */ +/* Set or get fan control mode */ #define EC_CMD_THERMAL_AUTO_FAN_CTRL 0x0052 +enum ec_auto_fan_ctrl_cmd { + EC_AUTO_FAN_CONTROL_CMD_SET = 0, + EC_AUTO_FAN_CONTROL_CMD_GET, +}; + /* Version 1 of input params */ struct ec_params_auto_fan_ctrl_v1 { uint8_t fan_idx; } __ec_align1; +/* Version 2 of input params */ +struct ec_params_auto_fan_ctrl_v2 { + uint8_t fan_idx; + uint8_t cmd; /* enum ec_auto_fan_ctrl_cmd */ + uint8_t set_auto; /* only used with EC_AUTO_FAN_CONTROL_CMD_SET - bool + */ +} __ec_align4; + +struct ec_response_auto_fan_control { + uint8_t is_auto; /* bool */ +} __ec_align1; + /* Get/Set TMP006 calibration data */ #define EC_CMD_TMP006_GET_CALIBRATION 0x0053 #define EC_CMD_TMP006_SET_CALIBRATION 0x0054 @@ -3453,6 +3544,34 @@ union __ec_align_offset1 ec_response_get_next_data_v1 { }; BUILD_ASSERT(sizeof(union ec_response_get_next_data_v1) == 16); +union __ec_align_offset1 ec_response_get_next_data_v3 { + uint8_t key_matrix[18]; + + /* Unaligned */ + uint32_t host_event; + uint64_t host_event64; + + struct __ec_todo_unpacked { + /* For aligning the fifo_info */ + uint8_t reserved[3]; + struct ec_response_motion_sense_fifo_info info; + } sensor_fifo; + + uint32_t buttons; + + uint32_t switches; + + uint32_t fp_events; + + uint32_t sysrq; + + /* CEC events from enum mkbp_cec_event */ + uint32_t cec_events; + + uint8_t cec_message[16]; +}; +BUILD_ASSERT(sizeof(union ec_response_get_next_data_v3) == 18); + struct ec_response_get_next_event { uint8_t event_type; /* Followed by event data if any */ @@ -3465,12 +3584,21 @@ struct ec_response_get_next_event_v1 { union ec_response_get_next_data_v1 data; } __ec_align1; +struct ec_response_get_next_event_v3 { + uint8_t event_type; + /* Followed by event data if any */ + union ec_response_get_next_data_v3 data; +} __ec_align1; + /* Bit indices for buttons and switches.*/ /* Buttons */ #define EC_MKBP_POWER_BUTTON 0 #define EC_MKBP_VOL_UP 1 #define EC_MKBP_VOL_DOWN 2 #define EC_MKBP_RECOVERY 3 +#define EC_MKBP_BRI_UP 4 +#define EC_MKBP_BRI_DOWN 5 +#define EC_MKBP_SCREEN_LOCK 6 /* Switches */ #define EC_MKBP_LID_OPEN 0 @@ -3796,16 +3924,61 @@ struct ec_params_i2c_write { * discharge the battery. */ #define EC_CMD_CHARGE_CONTROL 0x0096 -#define EC_VER_CHARGE_CONTROL 1 +#define EC_VER_CHARGE_CONTROL 3 enum ec_charge_control_mode { CHARGE_CONTROL_NORMAL = 0, CHARGE_CONTROL_IDLE, CHARGE_CONTROL_DISCHARGE, + /* Add no more entry below. */ + CHARGE_CONTROL_COUNT, +}; + +#define EC_CHARGE_MODE_TEXT \ + { \ + [CHARGE_CONTROL_NORMAL] = "NORMAL", \ + [CHARGE_CONTROL_IDLE] = "IDLE", \ + [CHARGE_CONTROL_DISCHARGE] = "DISCHARGE", \ + } + +enum ec_charge_control_cmd { + EC_CHARGE_CONTROL_CMD_SET = 0, + EC_CHARGE_CONTROL_CMD_GET, +}; + +enum ec_charge_control_flag { + EC_CHARGE_CONTROL_FLAG_NO_IDLE = BIT(0), }; struct ec_params_charge_control { - uint32_t mode; /* enum charge_control_mode */ + uint32_t mode; /* enum charge_control_mode */ + + /* Below are the fields added in V2. */ + uint8_t cmd; /* enum ec_charge_control_cmd. */ + uint8_t flags; /* enum ec_charge_control_flag (v3+) */ + /* + * Lower and upper thresholds for battery sustainer. This struct isn't + * named to avoid tainting foreign projects' name spaces. + * + * If charge mode is explicitly set (e.g. DISCHARGE), battery sustainer + * will be disabled. To disable battery sustainer, set mode=NORMAL, + * lower=-1, upper=-1. + */ + struct { + int8_t lower; /* Display SoC in percentage. */ + int8_t upper; /* Display SoC in percentage. */ + } sustain_soc; +} __ec_align4; + +/* Added in v2 */ +struct ec_response_charge_control { + uint32_t mode; /* enum charge_control_mode */ + struct { /* Battery sustainer thresholds */ + int8_t lower; + int8_t upper; + } sustain_soc; + uint8_t flags; /* enum ec_charge_control_flag (v3+) */ + uint8_t reserved; } __ec_align4; /*****************************************************************************/ @@ -3948,60 +4121,52 @@ struct ec_response_i2c_passthru { } __ec_align1; /*****************************************************************************/ -/* Power button hang detect */ - +/* AP hang detect */ #define EC_CMD_HANG_DETECT 0x009F -/* Reasons to start hang detection timer */ -/* Power button pressed */ -#define EC_HANG_START_ON_POWER_PRESS BIT(0) - -/* Lid closed */ -#define EC_HANG_START_ON_LID_CLOSE BIT(1) - - /* Lid opened */ -#define EC_HANG_START_ON_LID_OPEN BIT(2) - -/* Start of AP S3->S0 transition (booting or resuming from suspend) */ -#define EC_HANG_START_ON_RESUME BIT(3) +#define EC_HANG_DETECT_MIN_TIMEOUT 5 +#define EC_HANG_DETECT_MAX_TIMEOUT 65535 -/* Reasons to cancel hang detection */ +/* EC hang detect commands */ +enum ec_hang_detect_cmds { + /* Reload AP hang detect timer. */ + EC_HANG_DETECT_CMD_RELOAD = 0x0, -/* Power button released */ -#define EC_HANG_STOP_ON_POWER_RELEASE BIT(8) + /* Stop AP hang detect timer. */ + EC_HANG_DETECT_CMD_CANCEL = 0x1, -/* Any host command from AP received */ -#define EC_HANG_STOP_ON_HOST_COMMAND BIT(9) + /* Configure watchdog with given reboot timeout and + * cancel currently running AP hang detect timer. + */ + EC_HANG_DETECT_CMD_SET_TIMEOUT = 0x2, -/* Stop on end of AP S0->S3 transition (suspending or shutting down) */ -#define EC_HANG_STOP_ON_SUSPEND BIT(10) + /* Get last hang status - whether the AP boot was clear or not */ + EC_HANG_DETECT_CMD_GET_STATUS = 0x3, -/* - * If this flag is set, all the other fields are ignored, and the hang detect - * timer is started. This provides the AP a way to start the hang timer - * without reconfiguring any of the other hang detect settings. Note that - * you must previously have configured the timeouts. - */ -#define EC_HANG_START_NOW BIT(30) - -/* - * If this flag is set, all the other fields are ignored (including - * EC_HANG_START_NOW). This provides the AP a way to stop the hang timer - * without reconfiguring any of the other hang detect settings. - */ -#define EC_HANG_STOP_NOW BIT(31) + /* Clear last hang status. Called when AP is rebooting/shutting down + * gracefully. + */ + EC_HANG_DETECT_CMD_CLEAR_STATUS = 0x4 +}; struct ec_params_hang_detect { - /* Flags; see EC_HANG_* */ - uint32_t flags; - - /* Timeout in msec before generating host event, if enabled */ - uint16_t host_event_timeout_msec; + uint16_t command; /* enum ec_hang_detect_cmds */ + /* Timeout in seconds before generating reboot */ + uint16_t reboot_timeout_sec; +} __ec_align2; - /* Timeout in msec before generating warm reboot, if enabled */ - uint16_t warm_reboot_timeout_msec; -} __ec_align4; +/* Status codes that describe whether AP has boot normally or the hang has been + * detected and EC has reset AP + */ +enum ec_hang_detect_status { + EC_HANG_DETECT_AP_BOOT_NORMAL = 0x0, + EC_HANG_DETECT_AP_BOOT_EC_WDT = 0x1, + EC_HANG_DETECT_AP_BOOT_COUNT, +}; +struct ec_response_hang_detect { + uint8_t status; /* enum ec_hang_detect_status */ +} __ec_align1; /*****************************************************************************/ /* Commands for battery charging */ @@ -4423,8 +4588,20 @@ struct ec_response_i2c_passthru_protect { * These commands are for sending and receiving message via HDMI CEC */ +#define EC_CEC_MAX_PORTS 16 + #define MAX_CEC_MSG_LEN 16 +/* + * Helper macros for packing/unpacking cec_events. + * bits[27:0] : bitmask of events from enum mkbp_cec_event + * bits[31:28]: port number + */ +#define EC_MKBP_EVENT_CEC_PACK(events, port) \ + (((events) & GENMASK(27, 0)) | (((port) & 0xf) << 28)) +#define EC_MKBP_EVENT_CEC_GET_EVENTS(event) ((event) & GENMASK(27, 0)) +#define EC_MKBP_EVENT_CEC_GET_PORT(event) (((event) >> 28) & 0xf) + /* CEC message from the AP to be written on the CEC bus */ #define EC_CMD_CEC_WRITE_MSG 0x00B8 @@ -4436,19 +4613,54 @@ struct ec_params_cec_write { uint8_t msg[MAX_CEC_MSG_LEN]; } __ec_align1; +/** + * struct ec_params_cec_write_v1 - Message to write to the CEC bus + * @port: CEC port to write the message on + * @msg_len: length of msg in bytes + * @msg: message content to write to the CEC bus + */ +struct ec_params_cec_write_v1 { + uint8_t port; + uint8_t msg_len; + uint8_t msg[MAX_CEC_MSG_LEN]; +} __ec_align1; + +/* CEC message read from a CEC bus reported back to the AP */ +#define EC_CMD_CEC_READ_MSG 0x00B9 + +/** + * struct ec_params_cec_read - Read a message from the CEC bus + * @port: CEC port to read a message on + */ +struct ec_params_cec_read { + uint8_t port; +} __ec_align1; + +/** + * struct ec_response_cec_read - Message read from the CEC bus + * @msg_len: length of msg in bytes + * @msg: message content read from the CEC bus + */ +struct ec_response_cec_read { + uint8_t msg_len; + uint8_t msg[MAX_CEC_MSG_LEN]; +} __ec_align1; + /* Set various CEC parameters */ #define EC_CMD_CEC_SET 0x00BA /** * struct ec_params_cec_set - CEC parameters set * @cmd: parameter type, can be CEC_CMD_ENABLE or CEC_CMD_LOGICAL_ADDRESS + * @port: CEC port to set the parameter on * @val: in case cmd is CEC_CMD_ENABLE, this field can be 0 to disable CEC * or 1 to enable CEC functionality, in case cmd is * CEC_CMD_LOGICAL_ADDRESS, this field encodes the requested logical * address between 0 and 15 or 0xff to unregister */ struct ec_params_cec_set { - uint8_t cmd; /* enum cec_command */ + uint8_t cmd : 4; /* enum cec_command */ + uint8_t port : 4; uint8_t val; } __ec_align1; @@ -4458,9 +4670,11 @@ struct ec_params_cec_set { /** * struct ec_params_cec_get - CEC parameters get * @cmd: parameter type, can be CEC_CMD_ENABLE or CEC_CMD_LOGICAL_ADDRESS + * @port: CEC port to get the parameter on */ struct ec_params_cec_get { - uint8_t cmd; /* enum cec_command */ + uint8_t cmd : 4; /* enum cec_command */ + uint8_t port : 4; } __ec_align1; /** @@ -4474,6 +4688,17 @@ struct ec_response_cec_get { uint8_t val; } __ec_align1; +/* Get the number of CEC ports */ +#define EC_CMD_CEC_PORT_COUNT 0x00C1 + +/** + * struct ec_response_cec_port_count - CEC port count response + * @port_count: number of CEC ports + */ +struct ec_response_cec_port_count { + uint8_t port_count; +} __ec_align1; + /* CEC parameters command */ enum cec_command { /* CEC reading, writing and events enable */ @@ -4488,6 +4713,8 @@ enum mkbp_cec_event { EC_MKBP_CEC_SEND_OK = BIT(0), /* Outgoing message was not acknowledged */ EC_MKBP_CEC_SEND_FAILED = BIT(1), + /* Incoming message can be read out by AP */ + EC_MKBP_CEC_HAVE_DATA = BIT(2), }; /*****************************************************************************/ @@ -4866,8 +5093,12 @@ struct ec_response_pd_status { #define PD_EVENT_POWER_CHANGE BIT(1) #define PD_EVENT_IDENTITY_RECEIVED BIT(2) #define PD_EVENT_DATA_SWAP BIT(3) +#define PD_EVENT_TYPEC BIT(4) +#define PD_EVENT_PPM BIT(5) +#define PD_EVENT_INIT BIT(6) + struct ec_response_host_event_status { - uint32_t status; /* PD MCU host event status */ + uint32_t status; /* PD MCU host event status */ } __ec_align4; /* Set USB type-C port role and muxes */ @@ -5470,7 +5701,7 @@ struct ec_response_rollback_info { /* Issue AP reset */ #define EC_CMD_AP_RESET 0x0125 -/** +/* * Get the number of peripheral charge ports */ #define EC_CMD_PCHG_COUNT 0x0134 @@ -5481,7 +5712,7 @@ struct ec_response_pchg_count { uint8_t port_count; } __ec_align1; -/** +/* * Get the status of a peripheral charge port */ #define EC_CMD_PCHG 0x0135 @@ -5726,6 +5957,8 @@ enum typec_control_command { TYPEC_CONTROL_COMMAND_ENTER_MODE, TYPEC_CONTROL_COMMAND_TBT_UFP_REPLY, TYPEC_CONTROL_COMMAND_USB_MUX_SET, + TYPEC_CONTROL_COMMAND_BIST_SHARE_MODE, + TYPEC_CONTROL_COMMAND_SEND_VDM_REQ, }; /* Replies the AP may specify to the TBT EnterMode command as a UFP */ @@ -5739,6 +5972,17 @@ struct typec_usb_mux_set { uint8_t mux_flags; /* USB_PD_MUX_*-encoded USB mux state to set */ } __ec_align1; +#define VDO_MAX_SIZE 7 + +struct typec_vdm_req { + /* VDM data, including VDM header */ + uint32_t vdm_data[VDO_MAX_SIZE]; + /* Number of 32-bit fields filled in */ + uint8_t vdm_data_objects; + /* Partner to address - see enum typec_partner_type */ + uint8_t partner_type; +} __ec_align1; + struct ec_params_typec_control { uint8_t port; uint8_t command; /* enum typec_control_command */ @@ -5754,6 +5998,8 @@ struct ec_params_typec_control { uint8_t mode_to_enter; /* enum typec_mode */ uint8_t tbt_ufp_reply; /* enum typec_tbt_ufp_reply */ struct typec_usb_mux_set mux_params; + /* Used for VMD_REQ */ + struct typec_vdm_req vdm_req_params; uint8_t placeholder[128]; }; } __ec_align1; @@ -5835,6 +6081,9 @@ enum tcpc_cc_polarity { #define PD_STATUS_EVENT_DISCONNECTED BIT(3) #define PD_STATUS_EVENT_MUX_0_SET_DONE BIT(4) #define PD_STATUS_EVENT_MUX_1_SET_DONE BIT(5) +#define PD_STATUS_EVENT_VDM_REQ_REPLY BIT(6) +#define PD_STATUS_EVENT_VDM_REQ_FAILED BIT(7) +#define PD_STATUS_EVENT_VDM_ATTENTION BIT(8) struct ec_params_typec_status { uint8_t port; @@ -5878,6 +6127,60 @@ struct ec_response_typec_status { uint32_t sink_cap_pdos[7]; /* Max 7 PDOs can be present */ } __ec_align1; +/* + * Gather the response to the most recent VDM REQ from the AP, as well + * as popping the oldest VDM:Attention from the DPM queue + */ +#define EC_CMD_TYPEC_VDM_RESPONSE 0x013C + +struct ec_params_typec_vdm_response { + uint8_t port; +} __ec_align1; + +struct ec_response_typec_vdm_response { + /* Number of 32-bit fields filled in */ + uint8_t vdm_data_objects; + /* Partner to address - see enum typec_partner_type */ + uint8_t partner_type; + /* enum ec_status describing VDM response */ + uint16_t vdm_response_err; + /* VDM data, including VDM header */ + uint32_t vdm_response[VDO_MAX_SIZE]; + /* Number of 32-bit Attention fields filled in */ + uint8_t vdm_attention_objects; + /* Number of remaining messages to consume */ + uint8_t vdm_attention_left; + /* Reserved */ + uint16_t reserved1; + /* VDM:Attention contents */ + uint32_t vdm_attention[2]; +} __ec_align1; + +#undef VDO_MAX_SIZE + +/* + * UCSI OPM-PPM commands + * + * These commands are used for communication between OPM and PPM. + * Only UCSI3.0 is tested. + */ + +#define EC_CMD_UCSI_PPM_SET 0x0140 + +/* The data size is stored in the host command protocol header. */ +struct ec_params_ucsi_ppm_set { + uint16_t offset; + uint8_t data[]; +} __ec_align2; + +#define EC_CMD_UCSI_PPM_GET 0x0141 + +/* For 'GET' sub-commands, data will be returned as a raw payload. */ +struct ec_params_ucsi_ppm_get { + uint16_t offset; + uint8_t size; +} __ec_align2; + /*****************************************************************************/ /* The command range 0x200-0x2FF is reserved for Rotor. */ diff --git a/include/linux/platform_data/cros_ec_proto.h b/include/linux/platform_data/cros_ec_proto.h index e43107e0bee1..de14923720a5 100644 --- a/include/linux/platform_data/cros_ec_proto.h +++ b/include/linux/platform_data/cros_ec_proto.h @@ -9,6 +9,7 @@ #define __LINUX_CROS_EC_PROTO_H #include <linux/device.h> +#include <linux/lockdep_types.h> #include <linux/mutex.h> #include <linux/notifier.h> @@ -19,7 +20,6 @@ #define CROS_EC_DEV_ISH_NAME "cros_ish" #define CROS_EC_DEV_PD_NAME "cros_pd" #define CROS_EC_DEV_SCP_NAME "cros_scp" -#define CROS_EC_DEV_SCP_C1_NAME "cros_scp_c1" #define CROS_EC_DEV_TP_NAME "cros_tp" #define CROS_EC_DEV_EC_INDEX 0 @@ -33,15 +33,33 @@ /* * Max bus-specific overhead incurred by request/responses. - * I2C requires 1 additional byte for requests. - * I2C requires 2 additional bytes for responses. - * SPI requires up to 32 additional bytes for responses. + * + * Request: + * - I2C requires 1 byte (see struct ec_host_request_i2c). + * - ISHTP requires 4 bytes (see struct cros_ish_out_msg). + * + * Response: + * - I2C requires 2 bytes (see struct ec_host_response_i2c). + * - ISHTP requires 4 bytes (see struct cros_ish_in_msg). + * - SPI requires 32 bytes (see EC_MSG_PREAMBLE_COUNT). */ #define EC_PROTO_VERSION_UNKNOWN 0 -#define EC_MAX_REQUEST_OVERHEAD 1 +#define EC_MAX_REQUEST_OVERHEAD 4 #define EC_MAX_RESPONSE_OVERHEAD 32 /* + * ACPI notify value for MKBP host event. + */ +#define ACPI_NOTIFY_CROS_EC_MKBP 0x80 + +/* + * EC panic is not covered by the standard (0-F) ACPI notify values. + * Arbitrarily choosing B0 to notify ec panic, which is in the 84-BF + * device specific ACPI notify range. + */ +#define ACPI_NOTIFY_CROS_EC_PANIC 0xB0 + +/* * Command interface between EC and AP, for LPC, I2C and SPI interfaces. */ enum { @@ -110,12 +128,15 @@ struct cros_ec_command { * @dout_size: Size of dout buffer to allocate (zero to use static dout). * @wake_enabled: True if this device can wake the system from sleep. * @suspended: True if this device had been suspended. + * @registered: True if this device had been registered. * @cmd_xfer: Send command to EC and get response. * Returns the number of bytes received if the communication * succeeded, but that doesn't mean the EC was happy with the * command. The caller should check msg.result for the EC's result * code. * @pkt_xfer: Send packet to EC and get response. + * @lockdep_key: Lockdep class for each instance. Unused if CONFIG_LOCKDEP is + * not enabled. * @lock: One transaction at a time. * @mkbp_event_supported: 0 if MKBP not supported. Otherwise its value is * the maximum supported version of the MKBP host event @@ -125,6 +146,15 @@ struct cros_ec_command { * @event_data: Raw payload transferred with the MKBP event. * @event_size: Size in bytes of the event data. * @host_event_wake_mask: Mask of host events that cause wake from suspend. + * @suspend_timeout_ms: The timeout in milliseconds between when sleep event + * is received and when the EC will declare sleep + * transition failure if the sleep signal is not + * asserted. See also struct + * ec_params_host_sleep_event_v1 in cros_ec_commands.h. + * @last_resume_result: The number of sleep power signal transitions that + * occurred since the suspend message. The high bit + * indicates a timeout occurred. See also struct + * ec_response_host_sleep_event_v1 in cros_ec_commands.h. * @last_event_time: exact time from the hard irq when we got notified of * a new event. * @notifier_ready: The notifier_block to let the kernel re-query EC @@ -134,6 +164,7 @@ struct cros_ec_command { * main EC. * @pd: The platform_device used by the mfd driver to interface with the * PD behind an EC. + * @panic_notifier: EC panic notifier. */ struct cros_ec_device { /* These are used by other drivers that want to talk to the EC */ @@ -156,16 +187,18 @@ struct cros_ec_device { int dout_size; bool wake_enabled; bool suspended; + bool registered; int (*cmd_xfer)(struct cros_ec_device *ec, struct cros_ec_command *msg); int (*pkt_xfer)(struct cros_ec_device *ec, struct cros_ec_command *msg); + struct lock_class_key lockdep_key; struct mutex lock; u8 mkbp_event_supported; bool host_sleep_v1; struct blocking_notifier_head event_notifier; - struct ec_response_get_next_event_v1 event_data; + struct ec_response_get_next_event_v3 event_data; int event_size; u32 host_event_wake_mask; u32 last_resume_result; @@ -176,6 +209,8 @@ struct cros_ec_device { /* The platform devices used by the mfd driver */ struct platform_device *ec; struct platform_device *pd; + + struct blocking_notifier_head panic_notifier; }; /** @@ -224,6 +259,8 @@ int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev, int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev, struct cros_ec_command *msg); +int cros_ec_rwsig_continue(struct cros_ec_device *ec_dev); + int cros_ec_query_all(struct cros_ec_device *ec_dev); int cros_ec_get_next_event(struct cros_ec_device *ec_dev, @@ -236,9 +273,15 @@ bool cros_ec_check_features(struct cros_ec_dev *ec, int feature); int cros_ec_get_sensor_count(struct cros_ec_dev *ec); -int cros_ec_cmd(struct cros_ec_device *ec_dev, unsigned int version, int command, void *outdata, +int cros_ec_cmd(struct cros_ec_device *ec_dev, unsigned int version, int command, const void *outdata, size_t outsize, void *indata, size_t insize); +int cros_ec_cmd_readmem(struct cros_ec_device *ec_dev, u8 offset, u8 size, void *dest); + +int cros_ec_get_cmd_versions(struct cros_ec_device *ec_dev, u16 cmd); + +bool cros_ec_device_registered(struct cros_ec_device *ec_dev); + /** * cros_ec_get_time_ns() - Return time in ns. * diff --git a/include/linux/platform_data/cyttsp4.h b/include/linux/platform_data/cyttsp4.h deleted file mode 100644 index 5dc9d2be384b..000000000000 --- a/include/linux/platform_data/cyttsp4.h +++ /dev/null @@ -1,62 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Header file for: - * Cypress TrueTouch(TM) Standard Product (TTSP) touchscreen drivers. - * For use with Cypress Txx3xx parts. - * Supported parts include: - * CY8CTST341 - * CY8CTMA340 - * - * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc. - * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org> - * - * Contact Cypress Semiconductor at www.cypress.com (kev@cypress.com) - */ -#ifndef _CYTTSP4_H_ -#define _CYTTSP4_H_ - -#define CYTTSP4_MT_NAME "cyttsp4_mt" -#define CYTTSP4_I2C_NAME "cyttsp4_i2c_adapter" -#define CYTTSP4_SPI_NAME "cyttsp4_spi_adapter" - -#define CY_TOUCH_SETTINGS_MAX 32 - -struct touch_framework { - const uint16_t *abs; - uint8_t size; - uint8_t enable_vkeys; -} __packed; - -struct cyttsp4_mt_platform_data { - struct touch_framework *frmwrk; - unsigned short flags; - char const *inp_dev_name; -}; - -struct touch_settings { - const uint8_t *data; - uint32_t size; - uint8_t tag; -} __packed; - -struct cyttsp4_core_platform_data { - int irq_gpio; - int rst_gpio; - int level_irq_udelay; - int (*xres)(struct cyttsp4_core_platform_data *pdata, - struct device *dev); - int (*init)(struct cyttsp4_core_platform_data *pdata, - int on, struct device *dev); - int (*power)(struct cyttsp4_core_platform_data *pdata, - int on, struct device *dev, atomic_t *ignore_irq); - int (*irq_stat)(struct cyttsp4_core_platform_data *pdata, - struct device *dev); - struct touch_settings *sett[CY_TOUCH_SETTINGS_MAX]; -}; - -struct cyttsp4_platform_data { - struct cyttsp4_core_platform_data *core_pdata; - struct cyttsp4_mt_platform_data *mt_pdata; -}; - -#endif /* _CYTTSP4_H_ */ diff --git a/include/linux/platform_data/davinci-cpufreq.h b/include/linux/platform_data/davinci-cpufreq.h index bc208c64e3d7..1ef91c36f609 100644 --- a/include/linux/platform_data/davinci-cpufreq.h +++ b/include/linux/platform_data/davinci-cpufreq.h @@ -16,4 +16,10 @@ struct davinci_cpufreq_config { int (*init)(void); }; +#ifdef CONFIG_CPU_FREQ +int davinci_cpufreq_init(void); +#else +static inline int davinci_cpufreq_init(void) { return 0; } +#endif + #endif /* _MACH_DAVINCI_CPUFREQ_H */ diff --git a/include/linux/platform_data/davinci_asp.h b/include/linux/platform_data/davinci_asp.h index c8645b2ed3c0..b9c8520b4bd3 100644 --- a/include/linux/platform_data/davinci_asp.h +++ b/include/linux/platform_data/davinci_asp.h @@ -26,16 +26,6 @@ struct davinci_mcasp_pdata { struct gen_pool *sram_pool; /* - * If McBSP peripheral gets the clock from an external pin, - * there are three chooses, that are MCBSP_CLKX, MCBSP_CLKR - * and MCBSP_CLKS. - * Depending on different hardware connections it is possible - * to use this setting to change the behaviour of McBSP - * driver. - */ - int clk_input_pin; - - /* * This flag works when both clock and FS are outputs for the cpu * and makes clock more accurate (FS is not symmetrical and the * clock is very fast. @@ -91,11 +81,6 @@ enum { MCASP_VERSION_OMAP, /* OMAP4/5 */ }; -enum mcbsp_clk_input_pin { - MCBSP_CLKR = 0, /* as in DM365 */ - MCBSP_CLKS, -}; - #define INACTIVE_MODE 0 #define TX_MODE 1 #define RX_MODE 2 diff --git a/include/linux/platform_data/dma-ep93xx.h b/include/linux/platform_data/dma-ep93xx.h deleted file mode 100644 index eb9805bb3fe8..000000000000 --- a/include/linux/platform_data/dma-ep93xx.h +++ /dev/null @@ -1,94 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -#include <linux/types.h> -#include <linux/dmaengine.h> -#include <linux/dma-mapping.h> - -/* - * M2P channels. - * - * Note that these values are also directly used for setting the PPALLOC - * register. - */ -#define EP93XX_DMA_I2S1 0 -#define EP93XX_DMA_I2S2 1 -#define EP93XX_DMA_AAC1 2 -#define EP93XX_DMA_AAC2 3 -#define EP93XX_DMA_AAC3 4 -#define EP93XX_DMA_I2S3 5 -#define EP93XX_DMA_UART1 6 -#define EP93XX_DMA_UART2 7 -#define EP93XX_DMA_UART3 8 -#define EP93XX_DMA_IRDA 9 -/* M2M channels */ -#define EP93XX_DMA_SSP 10 -#define EP93XX_DMA_IDE 11 - -/** - * struct ep93xx_dma_data - configuration data for the EP93xx dmaengine - * @port: peripheral which is requesting the channel - * @direction: TX/RX channel - * @name: optional name for the channel, this is displayed in /proc/interrupts - * - * This information is passed as private channel parameter in a filter - * function. Note that this is only needed for slave/cyclic channels. For - * memcpy channels %NULL data should be passed. - */ -struct ep93xx_dma_data { - int port; - enum dma_transfer_direction direction; - const char *name; -}; - -/** - * struct ep93xx_dma_chan_data - platform specific data for a DMA channel - * @name: name of the channel, used for getting the right clock for the channel - * @base: mapped registers - * @irq: interrupt number used by this channel - */ -struct ep93xx_dma_chan_data { - const char *name; - void __iomem *base; - int irq; -}; - -/** - * struct ep93xx_dma_platform_data - platform data for the dmaengine driver - * @channels: array of channels which are passed to the driver - * @num_channels: number of channels in the array - * - * This structure is passed to the DMA engine driver via platform data. For - * M2P channels, contract is that even channels are for TX and odd for RX. - * There is no requirement for the M2M channels. - */ -struct ep93xx_dma_platform_data { - struct ep93xx_dma_chan_data *channels; - size_t num_channels; -}; - -static inline bool ep93xx_dma_chan_is_m2p(struct dma_chan *chan) -{ - return !strcmp(dev_name(chan->device->dev), "ep93xx-dma-m2p"); -} - -/** - * ep93xx_dma_chan_direction - returns direction the channel can be used - * @chan: channel - * - * This function can be used in filter functions to find out whether the - * channel supports given DMA direction. Only M2P channels have such - * limitation, for M2M channels the direction is configurable. - */ -static inline enum dma_transfer_direction -ep93xx_dma_chan_direction(struct dma_chan *chan) -{ - if (!ep93xx_dma_chan_is_m2p(chan)) - return DMA_TRANS_NONE; - - /* even channels are for TX, odd for RX */ - return (chan->chan_id % 2 == 0) ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM; -} - -#endif /* __ASM_ARCH_DMA_H */ diff --git a/include/linux/platform_data/dma-mmp_tdma.h b/include/linux/platform_data/dma-mmp_tdma.h deleted file mode 100644 index 8bec5484dc86..000000000000 --- a/include/linux/platform_data/dma-mmp_tdma.h +++ /dev/null @@ -1,36 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * SRAM Memory Management - * - * Copyright (c) 2011 Marvell Semiconductors Inc. - */ - -#ifndef __DMA_MMP_TDMA_H -#define __DMA_MMP_TDMA_H - -#include <linux/genalloc.h> - -/* ARBITRARY: SRAM allocations are multiples of this 2^N size */ -#define SRAM_GRANULARITY 512 - -enum sram_type { - MMP_SRAM_UNDEFINED = 0, - MMP_ASRAM, - MMP_ISRAM, -}; - -struct sram_platdata { - char *pool_name; - int granularity; -}; - -#ifdef CONFIG_MMP_SRAM -extern struct gen_pool *sram_get_gpool(char *pool_name); -#else -static inline struct gen_pool *sram_get_gpool(char *pool_name) -{ - return NULL; -} -#endif - -#endif /* __DMA_MMP_TDMA_H */ diff --git a/include/linux/platform_data/dma-s3c24xx.h b/include/linux/platform_data/dma-s3c24xx.h deleted file mode 100644 index 96d02dbeea67..000000000000 --- a/include/linux/platform_data/dma-s3c24xx.h +++ /dev/null @@ -1,48 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * S3C24XX DMA handling - * - * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> - */ - -/* Helper to encode the source selection constraints for early s3c socs. */ -#define S3C24XX_DMA_CHANREQ(src, chan) ((BIT(3) | src) << chan * 4) - -enum s3c24xx_dma_bus { - S3C24XX_DMA_APB, - S3C24XX_DMA_AHB, -}; - -/** - * @bus: on which bus does the peripheral reside - AHB or APB. - * @handshake: is a handshake with the peripheral necessary - * @chansel: channel selection information, depending on variant; reqsel for - * s3c2443 and later and channel-selection map for earlier SoCs - * see CHANSEL doc in s3c2443-dma.c - */ -struct s3c24xx_dma_channel { - enum s3c24xx_dma_bus bus; - bool handshake; - u16 chansel; -}; - -struct dma_slave_map; - -/** - * struct s3c24xx_dma_platdata - platform specific settings - * @num_phy_channels: number of physical channels - * @channels: array of virtual channel descriptions - * @num_channels: number of virtual channels - * @slave_map: dma slave map matching table - * @slavecnt: number of elements in slave_map - */ -struct s3c24xx_dma_platdata { - int num_phy_channels; - struct s3c24xx_dma_channel *channels; - int num_channels; - const struct dma_slave_map *slave_map; - int slavecnt; -}; - -struct dma_chan; -bool s3c24xx_dma_filter(struct dma_chan *chan, void *param); diff --git a/include/linux/platform_data/dma-ste-dma40.h b/include/linux/platform_data/dma-ste-dma40.h deleted file mode 100644 index 10641633facc..000000000000 --- a/include/linux/platform_data/dma-ste-dma40.h +++ /dev/null @@ -1,209 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) ST-Ericsson SA 2007-2010 - * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson - * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson - */ - - -#ifndef STE_DMA40_H -#define STE_DMA40_H - -#include <linux/dmaengine.h> -#include <linux/scatterlist.h> -#include <linux/workqueue.h> -#include <linux/interrupt.h> - -/* - * Maxium size for a single dma descriptor - * Size is limited to 16 bits. - * Size is in the units of addr-widths (1,2,4,8 bytes) - * Larger transfers will be split up to multiple linked desc - */ -#define STEDMA40_MAX_SEG_SIZE 0xFFFF - -/* dev types for memcpy */ -#define STEDMA40_DEV_DST_MEMORY (-1) -#define STEDMA40_DEV_SRC_MEMORY (-1) - -enum stedma40_mode { - STEDMA40_MODE_LOGICAL = 0, - STEDMA40_MODE_PHYSICAL, - STEDMA40_MODE_OPERATION, -}; - -enum stedma40_mode_opt { - STEDMA40_PCHAN_BASIC_MODE = 0, - STEDMA40_LCHAN_SRC_LOG_DST_LOG = 0, - STEDMA40_PCHAN_MODULO_MODE, - STEDMA40_PCHAN_DOUBLE_DST_MODE, - STEDMA40_LCHAN_SRC_PHY_DST_LOG, - STEDMA40_LCHAN_SRC_LOG_DST_PHY, -}; - -#define STEDMA40_ESIZE_8_BIT 0x0 -#define STEDMA40_ESIZE_16_BIT 0x1 -#define STEDMA40_ESIZE_32_BIT 0x2 -#define STEDMA40_ESIZE_64_BIT 0x3 - -/* The value 4 indicates that PEN-reg shall be set to 0 */ -#define STEDMA40_PSIZE_PHY_1 0x4 -#define STEDMA40_PSIZE_PHY_2 0x0 -#define STEDMA40_PSIZE_PHY_4 0x1 -#define STEDMA40_PSIZE_PHY_8 0x2 -#define STEDMA40_PSIZE_PHY_16 0x3 - -/* - * The number of elements differ in logical and - * physical mode - */ -#define STEDMA40_PSIZE_LOG_1 STEDMA40_PSIZE_PHY_2 -#define STEDMA40_PSIZE_LOG_4 STEDMA40_PSIZE_PHY_4 -#define STEDMA40_PSIZE_LOG_8 STEDMA40_PSIZE_PHY_8 -#define STEDMA40_PSIZE_LOG_16 STEDMA40_PSIZE_PHY_16 - -/* Maximum number of possible physical channels */ -#define STEDMA40_MAX_PHYS 32 - -enum stedma40_flow_ctrl { - STEDMA40_NO_FLOW_CTRL, - STEDMA40_FLOW_CTRL, -}; - -/** - * struct stedma40_half_channel_info - dst/src channel configuration - * - * @big_endian: true if the src/dst should be read as big endian - * @data_width: Data width of the src/dst hardware - * @p_size: Burst size - * @flow_ctrl: Flow control on/off. - */ -struct stedma40_half_channel_info { - bool big_endian; - enum dma_slave_buswidth data_width; - int psize; - enum stedma40_flow_ctrl flow_ctrl; -}; - -/** - * struct stedma40_chan_cfg - Structure to be filled by client drivers. - * - * @dir: MEM 2 MEM, PERIPH 2 MEM , MEM 2 PERIPH, PERIPH 2 PERIPH - * @high_priority: true if high-priority - * @realtime: true if realtime mode is to be enabled. Only available on DMA40 - * version 3+, i.e DB8500v2+ - * @mode: channel mode: physical, logical, or operation - * @mode_opt: options for the chosen channel mode - * @dev_type: src/dst device type (driver uses dir to figure out which) - * @src_info: Parameters for dst half channel - * @dst_info: Parameters for dst half channel - * @use_fixed_channel: if true, use physical channel specified by phy_channel - * @phy_channel: physical channel to use, only if use_fixed_channel is true - * - * This structure has to be filled by the client drivers. - * It is recommended to do all dma configurations for clients in the machine. - * - */ -struct stedma40_chan_cfg { - enum dma_transfer_direction dir; - bool high_priority; - bool realtime; - enum stedma40_mode mode; - enum stedma40_mode_opt mode_opt; - int dev_type; - struct stedma40_half_channel_info src_info; - struct stedma40_half_channel_info dst_info; - - bool use_fixed_channel; - int phy_channel; -}; - -/** - * struct stedma40_platform_data - Configuration struct for the dma device. - * - * @dev_tx: mapping between destination event line and io address - * @dev_rx: mapping between source event line and io address - * @disabled_channels: A vector, ending with -1, that marks physical channels - * that are for different reasons not available for the driver. - * @soft_lli_chans: A vector, that marks physical channels will use LLI by SW - * which avoids HW bug that exists in some versions of the controller. - * SoftLLI introduces relink overhead that could impact performace for - * certain use cases. - * @num_of_soft_lli_chans: The number of channels that needs to be configured - * to use SoftLLI. - * @use_esram_lcla: flag for mapping the lcla into esram region - * @num_of_memcpy_chans: The number of channels reserved for memcpy. - * @num_of_phy_chans: The number of physical channels implemented in HW. - * 0 means reading the number of channels from DMA HW but this is only valid - * for 'multiple of 4' channels, like 8. - */ -struct stedma40_platform_data { - int disabled_channels[STEDMA40_MAX_PHYS]; - int *soft_lli_chans; - int num_of_soft_lli_chans; - bool use_esram_lcla; - int num_of_memcpy_chans; - int num_of_phy_chans; -}; - -#ifdef CONFIG_STE_DMA40 - -/** - * stedma40_filter() - Provides stedma40_chan_cfg to the - * ste_dma40 dma driver via the dmaengine framework. - * does some checking of what's provided. - * - * Never directly called by client. It used by dmaengine. - * @chan: dmaengine handle. - * @data: Must be of type: struct stedma40_chan_cfg and is - * the configuration of the framework. - * - * - */ - -bool stedma40_filter(struct dma_chan *chan, void *data); - -/** - * stedma40_slave_mem() - Transfers a raw data buffer to or from a slave - * (=device) - * - * @chan: dmaengine handle - * @addr: source or destination physicall address. - * @size: bytes to transfer - * @direction: direction of transfer - * @flags: is actually enum dma_ctrl_flags. See dmaengine.h - */ - -static inline struct -dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan, - dma_addr_t addr, - unsigned int size, - enum dma_transfer_direction direction, - unsigned long flags) -{ - struct scatterlist sg; - sg_init_table(&sg, 1); - sg.dma_address = addr; - sg.length = size; - - return dmaengine_prep_slave_sg(chan, &sg, 1, direction, flags); -} - -#else -static inline bool stedma40_filter(struct dma_chan *chan, void *data) -{ - return false; -} - -static inline struct -dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan, - dma_addr_t addr, - unsigned int size, - enum dma_transfer_direction direction, - unsigned long flags) -{ - return NULL; -} -#endif - -#endif diff --git a/include/linux/platform_data/dmtimer-omap.h b/include/linux/platform_data/dmtimer-omap.h index 95d852aef130..726d89143842 100644 --- a/include/linux/platform_data/dmtimer-omap.h +++ b/include/linux/platform_data/dmtimer-omap.h @@ -36,9 +36,13 @@ struct omap_dm_timer_ops { int (*set_pwm)(struct omap_dm_timer *timer, int def_on, int toggle, int trigger, int autoreload); int (*get_pwm_status)(struct omap_dm_timer *timer); + int (*set_cap)(struct omap_dm_timer *timer, + int autoreload, bool config_period); + int (*get_cap_status)(struct omap_dm_timer *timer); int (*set_prescaler)(struct omap_dm_timer *timer, int prescaler); unsigned int (*read_counter)(struct omap_dm_timer *timer); + unsigned int (*read_cap)(struct omap_dm_timer *timer, bool is_period); int (*write_counter)(struct omap_dm_timer *timer, unsigned int value); unsigned int (*read_status)(struct omap_dm_timer *timer); diff --git a/include/linux/platform_data/emc2305.h b/include/linux/platform_data/emc2305.h index 54d672dd6f7d..76043a97f975 100644 --- a/include/linux/platform_data/emc2305.h +++ b/include/linux/platform_data/emc2305.h @@ -9,14 +9,20 @@ * struct emc2305_platform_data - EMC2305 driver platform data * @max_state: maximum cooling state of the cooling device; * @pwm_num: number of active channels; + * @pwm_output_mask: PWM output mask + * @pwm_polarity_mask: PWM polarity mask * @pwm_separate: separate PWM settings for every channel; * @pwm_min: array of minimum PWM per channel; + * @pwm_freq: array of PWM frequency per channel */ struct emc2305_platform_data { u8 max_state; u8 pwm_num; + u8 pwm_output_mask; + u8 pwm_polarity_mask; bool pwm_separate; u8 pwm_min[EMC2305_PWM_MAX]; + u16 pwm_freq[EMC2305_PWM_MAX]; }; #endif diff --git a/include/linux/platform_data/eth-ep93xx.h b/include/linux/platform_data/eth-ep93xx.h deleted file mode 100644 index 8eef637a804d..000000000000 --- a/include/linux/platform_data/eth-ep93xx.h +++ /dev/null @@ -1,10 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _LINUX_PLATFORM_DATA_ETH_EP93XX -#define _LINUX_PLATFORM_DATA_ETH_EP93XX - -struct ep93xx_eth_data { - unsigned char dev_addr[6]; - unsigned char phy_id; -}; - -#endif diff --git a/include/linux/platform_data/fb-s3c2410.h b/include/linux/platform_data/fb-s3c2410.h deleted file mode 100644 index 10c11e6316d6..000000000000 --- a/include/linux/platform_data/fb-s3c2410.h +++ /dev/null @@ -1,99 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (c) 2004 Arnaud Patard <arnaud.patard@rtp-net.org> - * - * Inspired by pxafb.h -*/ - -#ifndef __ASM_PLAT_FB_S3C2410_H -#define __ASM_PLAT_FB_S3C2410_H __FILE__ - -#include <linux/compiler_types.h> - -struct s3c2410fb_hw { - unsigned long lcdcon1; - unsigned long lcdcon2; - unsigned long lcdcon3; - unsigned long lcdcon4; - unsigned long lcdcon5; -}; - -/* LCD description */ -struct s3c2410fb_display { - /* LCD type */ - unsigned type; -#define S3C2410_LCDCON1_DSCAN4 (0<<5) -#define S3C2410_LCDCON1_STN4 (1<<5) -#define S3C2410_LCDCON1_STN8 (2<<5) -#define S3C2410_LCDCON1_TFT (3<<5) - -#define S3C2410_LCDCON1_TFT1BPP (8<<1) -#define S3C2410_LCDCON1_TFT2BPP (9<<1) -#define S3C2410_LCDCON1_TFT4BPP (10<<1) -#define S3C2410_LCDCON1_TFT8BPP (11<<1) -#define S3C2410_LCDCON1_TFT16BPP (12<<1) -#define S3C2410_LCDCON1_TFT24BPP (13<<1) - - /* Screen size */ - unsigned short width; - unsigned short height; - - /* Screen info */ - unsigned short xres; - unsigned short yres; - unsigned short bpp; - - unsigned pixclock; /* pixclock in picoseconds */ - unsigned short left_margin; /* value in pixels (TFT) or HCLKs (STN) */ - unsigned short right_margin; /* value in pixels (TFT) or HCLKs (STN) */ - unsigned short hsync_len; /* value in pixels (TFT) or HCLKs (STN) */ - unsigned short upper_margin; /* value in lines (TFT) or 0 (STN) */ - unsigned short lower_margin; /* value in lines (TFT) or 0 (STN) */ - unsigned short vsync_len; /* value in lines (TFT) or 0 (STN) */ - - /* lcd configuration registers */ - unsigned long lcdcon5; -#define S3C2410_LCDCON5_BPP24BL (1<<12) -#define S3C2410_LCDCON5_FRM565 (1<<11) -#define S3C2410_LCDCON5_INVVCLK (1<<10) -#define S3C2410_LCDCON5_INVVLINE (1<<9) -#define S3C2410_LCDCON5_INVVFRAME (1<<8) -#define S3C2410_LCDCON5_INVVD (1<<7) -#define S3C2410_LCDCON5_INVVDEN (1<<6) -#define S3C2410_LCDCON5_INVPWREN (1<<5) -#define S3C2410_LCDCON5_INVLEND (1<<4) -#define S3C2410_LCDCON5_PWREN (1<<3) -#define S3C2410_LCDCON5_ENLEND (1<<2) -#define S3C2410_LCDCON5_BSWP (1<<1) -#define S3C2410_LCDCON5_HWSWP (1<<0) -}; - -struct s3c2410fb_mach_info { - - struct s3c2410fb_display *displays; /* attached displays info */ - unsigned num_displays; /* number of defined displays */ - unsigned default_display; - - /* GPIOs */ - - unsigned long gpcup; - unsigned long gpcup_mask; - unsigned long gpccon; - unsigned long gpccon_mask; - unsigned long gpdup; - unsigned long gpdup_mask; - unsigned long gpdcon; - unsigned long gpdcon_mask; - - void __iomem * gpccon_reg; - void __iomem * gpcup_reg; - void __iomem * gpdcon_reg; - void __iomem * gpdup_reg; - - /* lpc3600 control register */ - unsigned long lpcsel; -}; - -extern void s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *); - -#endif /* __ASM_PLAT_FB_S3C2410_H */ diff --git a/include/linux/platform_data/gpio-ath79.h b/include/linux/platform_data/gpio-ath79.h deleted file mode 100644 index 3ea6dd942c27..000000000000 --- a/include/linux/platform_data/gpio-ath79.h +++ /dev/null @@ -1,16 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Atheros AR7XXX/AR9XXX GPIO controller platform data - * - * Copyright (C) 2015 Alban Bedel <albeu@free.fr> - */ - -#ifndef __LINUX_PLATFORM_DATA_GPIO_ATH79_H -#define __LINUX_PLATFORM_DATA_GPIO_ATH79_H - -struct ath79_gpio_platform_data { - unsigned ngpios; - bool oe_inverted; -}; - -#endif diff --git a/include/linux/platform_data/gpio-davinci.h b/include/linux/platform_data/gpio-davinci.h deleted file mode 100644 index b82e44662efe..000000000000 --- a/include/linux/platform_data/gpio-davinci.h +++ /dev/null @@ -1,21 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * DaVinci GPIO Platform Related Defines - * - * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ - */ - -#ifndef __DAVINCI_GPIO_PLATFORM_H -#define __DAVINCI_GPIO_PLATFORM_H - -struct davinci_gpio_platform_data { - bool no_auto_base; - u32 base; - u32 ngpio; - u32 gpio_unbanked; -}; - -/* Convert GPIO signal to GPIO pin number */ -#define GPIO_TO_PIN(bank, gpio) (16 * (bank) + (gpio)) - -#endif diff --git a/include/linux/platform_data/gpio-omap.h b/include/linux/platform_data/gpio-omap.h index f377817ce75c..cdd8cfb424f5 100644 --- a/include/linux/platform_data/gpio-omap.h +++ b/include/linux/platform_data/gpio-omap.h @@ -144,9 +144,6 @@ #define OMAP_MAX_GPIO_LINES 192 -#define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr)) -#define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES) - #ifndef __ASSEMBLER__ struct omap_gpio_reg_offs { u16 revision; diff --git a/include/linux/platform_data/gpio_backlight.h b/include/linux/platform_data/gpio_backlight.h index 1a8b5b1946fe..323fbf5f7613 100644 --- a/include/linux/platform_data/gpio_backlight.h +++ b/include/linux/platform_data/gpio_backlight.h @@ -8,7 +8,7 @@ struct device; struct gpio_backlight_platform_data { - struct device *fbdev; + struct device *dev; }; #endif diff --git a/include/linux/platform_data/gsc_hwmon.h b/include/linux/platform_data/gsc_hwmon.h index f2781aa7eff8..70e8a6bec0f6 100644 --- a/include/linux/platform_data/gsc_hwmon.h +++ b/include/linux/platform_data/gsc_hwmon.h @@ -40,6 +40,6 @@ struct gsc_hwmon_platform_data { unsigned int resolution; unsigned int vreference; unsigned int fan_base; - struct gsc_hwmon_channel channels[]; + struct gsc_hwmon_channel channels[] __counted_by(nchannels); }; #endif diff --git a/include/linux/platform_data/hirschmann-hellcreek.h b/include/linux/platform_data/hirschmann-hellcreek.h index 6a000df5541f..8748680e9e3c 100644 --- a/include/linux/platform_data/hirschmann-hellcreek.h +++ b/include/linux/platform_data/hirschmann-hellcreek.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: (GPL-2.0 or MIT) */ +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */ /* * Hirschmann Hellcreek TSN switch platform data. * diff --git a/include/linux/platform_data/huawei-gaokun-ec.h b/include/linux/platform_data/huawei-gaokun-ec.h new file mode 100644 index 000000000000..faa15d315128 --- /dev/null +++ b/include/linux/platform_data/huawei-gaokun-ec.h @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Huawei Matebook E Go Embedded Controller + * + * Copyright (C) 2024-2025 Pengyu Luo <mitltlatltl@gmail.com> + */ + +#ifndef __HUAWEI_GAOKUN_EC_H__ +#define __HUAWEI_GAOKUN_EC_H__ + +#define GAOKUN_UCSI_CCI_SIZE 4 +#define GAOKUN_UCSI_MSGI_SIZE 16 +#define GAOKUN_UCSI_READ_SIZE (GAOKUN_UCSI_CCI_SIZE + GAOKUN_UCSI_MSGI_SIZE) +#define GAOKUN_UCSI_WRITE_SIZE 24 /* 8B CTRL, 16B MSGO */ + +#define GAOKUN_UCSI_NO_PORT_UPDATE (-1) + +#define GAOKUN_SMART_CHARGE_DATA_SIZE 4 /* mode, delay, start, end */ + +/* -------------------------------------------------------------------------- */ + +struct gaokun_ec; +struct gaokun_ucsi_reg; +struct notifier_block; + +#define GAOKUN_MOD_NAME "huawei_gaokun_ec" +#define GAOKUN_DEV_PSY "psy" +#define GAOKUN_DEV_UCSI "ucsi" + +/* -------------------------------------------------------------------------- */ +/* Common API */ + +int gaokun_ec_register_notify(struct gaokun_ec *ec, + struct notifier_block *nb); +void gaokun_ec_unregister_notify(struct gaokun_ec *ec, + struct notifier_block *nb); + +int gaokun_ec_read(struct gaokun_ec *ec, const u8 *req, + size_t resp_len, u8 *resp); +int gaokun_ec_write(struct gaokun_ec *ec, const u8 *req); +int gaokun_ec_read_byte(struct gaokun_ec *ec, const u8 *req, u8 *byte); + +/* -------------------------------------------------------------------------- */ +/* API for PSY */ + +int gaokun_ec_psy_multi_read(struct gaokun_ec *ec, u8 reg, + size_t resp_len, u8 *resp); + +static inline int gaokun_ec_psy_read_byte(struct gaokun_ec *ec, + u8 reg, u8 *byte) +{ + return gaokun_ec_psy_multi_read(ec, reg, sizeof(*byte), byte); +} + +static inline int gaokun_ec_psy_read_word(struct gaokun_ec *ec, + u8 reg, u16 *word) +{ + return gaokun_ec_psy_multi_read(ec, reg, sizeof(*word), (u8 *)word); +} + +int gaokun_ec_psy_get_smart_charge(struct gaokun_ec *ec, + u8 resp[GAOKUN_SMART_CHARGE_DATA_SIZE]); +int gaokun_ec_psy_set_smart_charge(struct gaokun_ec *ec, + const u8 req[GAOKUN_SMART_CHARGE_DATA_SIZE]); + +int gaokun_ec_psy_get_smart_charge_enable(struct gaokun_ec *ec, bool *on); +int gaokun_ec_psy_set_smart_charge_enable(struct gaokun_ec *ec, bool on); + +/* -------------------------------------------------------------------------- */ +/* API for UCSI */ + +int gaokun_ec_ucsi_read(struct gaokun_ec *ec, u8 resp[GAOKUN_UCSI_READ_SIZE]); +int gaokun_ec_ucsi_write(struct gaokun_ec *ec, + const u8 req[GAOKUN_UCSI_WRITE_SIZE]); + +int gaokun_ec_ucsi_get_reg(struct gaokun_ec *ec, struct gaokun_ucsi_reg *ureg); +int gaokun_ec_ucsi_pan_ack(struct gaokun_ec *ec, int port_id); + +#endif /* __HUAWEI_GAOKUN_EC_H__ */ diff --git a/include/linux/platform_data/hwmon-s3c.h b/include/linux/platform_data/hwmon-s3c.h index 1707ad4147df..7d21e0c41037 100644 --- a/include/linux/platform_data/hwmon-s3c.h +++ b/include/linux/platform_data/hwmon-s3c.h @@ -33,14 +33,4 @@ struct s3c_hwmon_pdata { struct s3c_hwmon_chcfg *in[8]; }; -/** - * s3c_hwmon_set_platdata - Set platform data for S3C HWMON device - * @pd: Platform data to register to device. - * - * Register the given platform data for use with the S3C HWMON device. - * The call will copy the platform data, so the board definitions can - * make the structure itself __initdata. - */ -extern void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd); - #endif /* __HWMON_S3C_H__ */ diff --git a/include/linux/platform_data/i2c-davinci.h b/include/linux/platform_data/i2c-davinci.h deleted file mode 100644 index 98967df07468..000000000000 --- a/include/linux/platform_data/i2c-davinci.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * DaVinci I2C controller platform_device info - * - * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com> - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. -*/ - -#ifndef __ASM_ARCH_I2C_H -#define __ASM_ARCH_I2C_H - -/* All frequencies are expressed in kHz */ -struct davinci_i2c_platform_data { - unsigned int bus_freq; /* standard bus frequency (kHz) */ - unsigned int bus_delay; /* post-transaction delay (usec) */ - bool gpio_recovery; /* Use GPIO recovery method */ - bool has_pfunc; /* Chip has a ICPFUNC register */ -}; - -/* for board setup code */ -void davinci_init_i2c(struct davinci_i2c_platform_data *); - -#endif /* __ASM_ARCH_I2C_H */ diff --git a/include/linux/platform_data/i2c-gpio.h b/include/linux/platform_data/i2c-gpio.h index a907774fd177..545639bcca72 100644 --- a/include/linux/platform_data/i2c-gpio.h +++ b/include/linux/platform_data/i2c-gpio.h @@ -16,16 +16,25 @@ * isn't actively driven high when setting the output value high. * gpio_get_value() must return the actual pin state even if the * pin is configured as an output. + * @sda_is_output_only: SDA output drivers can't be turned off. + * This is for clients that can only read SDA/SCL. + * @sda_has_no_pullup: SDA is used in a non-compliant way and has no pull-up. + * Therefore disable open-drain. * @scl_is_open_drain: SCL is set up as open drain. Same requirements * as for sda_is_open_drain apply. * @scl_is_output_only: SCL output drivers cannot be turned off. + * @scl_has_no_pullup: SCL is used in a non-compliant way and has no pull-up. + * Therefore disable open-drain. */ struct i2c_gpio_platform_data { int udelay; int timeout; unsigned int sda_is_open_drain:1; + unsigned int sda_is_output_only:1; + unsigned int sda_has_no_pullup:1; unsigned int scl_is_open_drain:1; unsigned int scl_is_output_only:1; + unsigned int scl_has_no_pullup:1; }; #endif /* _LINUX_I2C_GPIO_H */ diff --git a/include/linux/platform_data/i2c-mux-gpio.h b/include/linux/platform_data/i2c-mux-gpio.h index 5e4c2c272a73..96843aab4d1e 100644 --- a/include/linux/platform_data/i2c-mux-gpio.h +++ b/include/linux/platform_data/i2c-mux-gpio.h @@ -18,16 +18,16 @@ * @values: Array of bitmasks of GPIO settings (low/high) for each * position * @n_values: Number of multiplexer positions (busses to instantiate) - * @classes: Optional I2C auto-detection classes * @idle: Bitmask to write to MUX when idle or GPIO_I2CMUX_NO_IDLE if not used + * @settle_time: Delay to wait when a new bus is selected */ struct i2c_mux_gpio_platform_data { int parent; int base_nr; const unsigned *values; int n_values; - const unsigned *classes; unsigned idle; + u32 settle_time; }; #endif /* _LINUX_I2C_MUX_GPIO_H */ diff --git a/include/linux/platform_data/i2c-mux-reg.h b/include/linux/platform_data/i2c-mux-reg.h index 2543c2a1c9ae..e2e895768311 100644 --- a/include/linux/platform_data/i2c-mux-reg.h +++ b/include/linux/platform_data/i2c-mux-reg.h @@ -17,7 +17,6 @@ * @n_values: Number of multiplexer channels * @little_endian: Indicating if the register is in little endian * @write_only: Reading the register is not allowed by hardware - * @classes: Optional I2C auto-detection classes * @idle: Value to write to mux when idle * @idle_in_use: indicate if idle value is in use * @reg: Virtual address of the register to switch channel @@ -30,7 +29,6 @@ struct i2c_mux_reg_platform_data { int n_values; bool little_endian; bool write_only; - const unsigned int *classes; u32 idle; bool idle_in_use; void __iomem *reg; diff --git a/include/linux/platform_data/irda-pxaficp.h b/include/linux/platform_data/irda-pxaficp.h deleted file mode 100644 index bd35ddcf3068..000000000000 --- a/include/linux/platform_data/irda-pxaficp.h +++ /dev/null @@ -1,26 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef ASMARM_ARCH_IRDA_H -#define ASMARM_ARCH_IRDA_H - -/* board specific transceiver capabilities */ - -#define IR_OFF 1 -#define IR_SIRMODE 2 -#define IR_FIRMODE 4 - -struct pxaficp_platform_data { - int transceiver_cap; - void (*transceiver_mode)(struct device *dev, int mode); - int (*startup)(struct device *dev); - void (*shutdown)(struct device *dev); - int gpio_pwdown; /* powerdown GPIO for the IrDA chip */ - bool gpio_pwdown_inverted; /* gpio_pwdown is inverted */ -}; - -extern void pxa_set_ficp_info(struct pxaficp_platform_data *info); - -#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x) -void pxa2xx_transceiver_mode(struct device *dev, int mode); -#endif - -#endif diff --git a/include/linux/platform_data/irda-sa11x0.h b/include/linux/platform_data/irda-sa11x0.h deleted file mode 100644 index 7db59c917575..000000000000 --- a/include/linux/platform_data/irda-sa11x0.h +++ /dev/null @@ -1,17 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/include/asm/mach/irda.h - * - * Copyright (C) 2004 Russell King. - */ -#ifndef __ASM_ARM_MACH_IRDA_H -#define __ASM_ARM_MACH_IRDA_H - -struct irda_platform_data { - int (*startup)(struct device *); - void (*shutdown)(struct device *); - int (*set_power)(struct device *, unsigned int state); - void (*set_speed)(struct device *, unsigned int speed); -}; - -#endif diff --git a/include/linux/platform_data/keyboard-pxa930_rotary.h b/include/linux/platform_data/keyboard-pxa930_rotary.h deleted file mode 100644 index 3271aa01cbe8..000000000000 --- a/include/linux/platform_data/keyboard-pxa930_rotary.h +++ /dev/null @@ -1,21 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_ARCH_PXA930_ROTARY_H -#define __ASM_ARCH_PXA930_ROTARY_H - -/* NOTE: - * - * rotary can be either interpreted as a ralative input event (e.g. - * REL_WHEEL or REL_HWHEEL) or a specific key event (e.g. UP/DOWN - * or LEFT/RIGHT), depending on if up_key & down_key are assigned - * or rel_code is assigned a non-zero value. When all are non-zero, - * up_key and down_key will be preferred. - */ -struct pxa930_rotary_platform_data { - int up_key; - int down_key; - int rel_code; -}; - -void __init pxa930_set_rotarykey_info(struct pxa930_rotary_platform_data *info); - -#endif /* __ASM_ARCH_PXA930_ROTARY_H */ diff --git a/include/linux/platform_data/keyboard-spear.h b/include/linux/platform_data/keyboard-spear.h deleted file mode 100644 index 5e3ff653900c..000000000000 --- a/include/linux/platform_data/keyboard-spear.h +++ /dev/null @@ -1,164 +0,0 @@ -/* - * Copyright (C) 2010 ST Microelectronics - * Rajeev Kumar <rajeevkumar.linux@gmail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __PLAT_KEYBOARD_H -#define __PLAT_KEYBOARD_H - -#include <linux/bitops.h> -#include <linux/input.h> -#include <linux/input/matrix_keypad.h> -#include <linux/types.h> - -#define DECLARE_9x9_KEYMAP(_name) \ -int _name[] = { \ - KEY(0, 0, KEY_ESC), \ - KEY(0, 1, KEY_1), \ - KEY(0, 2, KEY_2), \ - KEY(0, 3, KEY_3), \ - KEY(0, 4, KEY_4), \ - KEY(0, 5, KEY_5), \ - KEY(0, 6, KEY_6), \ - KEY(0, 7, KEY_7), \ - KEY(0, 8, KEY_8), \ - KEY(1, 0, KEY_9), \ - KEY(1, 1, KEY_MINUS), \ - KEY(1, 2, KEY_EQUAL), \ - KEY(1, 3, KEY_BACKSPACE), \ - KEY(1, 4, KEY_TAB), \ - KEY(1, 5, KEY_Q), \ - KEY(1, 6, KEY_W), \ - KEY(1, 7, KEY_E), \ - KEY(1, 8, KEY_R), \ - KEY(2, 0, KEY_T), \ - KEY(2, 1, KEY_Y), \ - KEY(2, 2, KEY_U), \ - KEY(2, 3, KEY_I), \ - KEY(2, 4, KEY_O), \ - KEY(2, 5, KEY_P), \ - KEY(2, 6, KEY_LEFTBRACE), \ - KEY(2, 7, KEY_RIGHTBRACE), \ - KEY(2, 8, KEY_ENTER), \ - KEY(3, 0, KEY_LEFTCTRL), \ - KEY(3, 1, KEY_A), \ - KEY(3, 2, KEY_S), \ - KEY(3, 3, KEY_D), \ - KEY(3, 4, KEY_F), \ - KEY(3, 5, KEY_G), \ - KEY(3, 6, KEY_H), \ - KEY(3, 7, KEY_J), \ - KEY(3, 8, KEY_K), \ - KEY(4, 0, KEY_L), \ - KEY(4, 1, KEY_SEMICOLON), \ - KEY(4, 2, KEY_APOSTROPHE), \ - KEY(4, 3, KEY_GRAVE), \ - KEY(4, 4, KEY_LEFTSHIFT), \ - KEY(4, 5, KEY_BACKSLASH), \ - KEY(4, 6, KEY_Z), \ - KEY(4, 7, KEY_X), \ - KEY(4, 8, KEY_C), \ - KEY(5, 0, KEY_V), \ - KEY(5, 1, KEY_B), \ - KEY(5, 2, KEY_N), \ - KEY(5, 3, KEY_M), \ - KEY(5, 4, KEY_COMMA), \ - KEY(5, 5, KEY_DOT), \ - KEY(5, 6, KEY_SLASH), \ - KEY(5, 7, KEY_RIGHTSHIFT), \ - KEY(5, 8, KEY_KPASTERISK), \ - KEY(6, 0, KEY_LEFTALT), \ - KEY(6, 1, KEY_SPACE), \ - KEY(6, 2, KEY_CAPSLOCK), \ - KEY(6, 3, KEY_F1), \ - KEY(6, 4, KEY_F2), \ - KEY(6, 5, KEY_F3), \ - KEY(6, 6, KEY_F4), \ - KEY(6, 7, KEY_F5), \ - KEY(6, 8, KEY_F6), \ - KEY(7, 0, KEY_F7), \ - KEY(7, 1, KEY_F8), \ - KEY(7, 2, KEY_F9), \ - KEY(7, 3, KEY_F10), \ - KEY(7, 4, KEY_NUMLOCK), \ - KEY(7, 5, KEY_SCROLLLOCK), \ - KEY(7, 6, KEY_KP7), \ - KEY(7, 7, KEY_KP8), \ - KEY(7, 8, KEY_KP9), \ - KEY(8, 0, KEY_KPMINUS), \ - KEY(8, 1, KEY_KP4), \ - KEY(8, 2, KEY_KP5), \ - KEY(8, 3, KEY_KP6), \ - KEY(8, 4, KEY_KPPLUS), \ - KEY(8, 5, KEY_KP1), \ - KEY(8, 6, KEY_KP2), \ - KEY(8, 7, KEY_KP3), \ - KEY(8, 8, KEY_KP0), \ -} - -#define DECLARE_6x6_KEYMAP(_name) \ -int _name[] = { \ - KEY(0, 0, KEY_RESERVED), \ - KEY(0, 1, KEY_1), \ - KEY(0, 2, KEY_2), \ - KEY(0, 3, KEY_3), \ - KEY(0, 4, KEY_4), \ - KEY(0, 5, KEY_5), \ - KEY(1, 0, KEY_Q), \ - KEY(1, 1, KEY_W), \ - KEY(1, 2, KEY_E), \ - KEY(1, 3, KEY_R), \ - KEY(1, 4, KEY_T), \ - KEY(1, 5, KEY_Y), \ - KEY(2, 0, KEY_D), \ - KEY(2, 1, KEY_F), \ - KEY(2, 2, KEY_G), \ - KEY(2, 3, KEY_H), \ - KEY(2, 4, KEY_J), \ - KEY(2, 5, KEY_K), \ - KEY(3, 0, KEY_B), \ - KEY(3, 1, KEY_N), \ - KEY(3, 2, KEY_M), \ - KEY(3, 3, KEY_COMMA), \ - KEY(3, 4, KEY_DOT), \ - KEY(3, 5, KEY_SLASH), \ - KEY(4, 0, KEY_F6), \ - KEY(4, 1, KEY_F7), \ - KEY(4, 2, KEY_F8), \ - KEY(4, 3, KEY_F9), \ - KEY(4, 4, KEY_F10), \ - KEY(4, 5, KEY_NUMLOCK), \ - KEY(5, 0, KEY_KP2), \ - KEY(5, 1, KEY_KP3), \ - KEY(5, 2, KEY_KP0), \ - KEY(5, 3, KEY_KPDOT), \ - KEY(5, 4, KEY_RO), \ - KEY(5, 5, KEY_ZENKAKUHANKAKU), \ -} - -#define KEYPAD_9x9 0 -#define KEYPAD_6x6 1 -#define KEYPAD_2x2 2 - -/** - * struct kbd_platform_data - spear keyboard platform data - * keymap: pointer to keymap data (table and size) - * rep: enables key autorepeat - * mode: choose keyboard support(9x9, 6x6, 2x2) - * suspended_rate: rate at which keyboard would operate in suspended mode - * - * This structure is supposed to be used by platform code to supply - * keymaps to drivers that implement keyboards. - */ -struct kbd_platform_data { - const struct matrix_keymap_data *keymap; - bool rep; - unsigned int mode; - unsigned int suspended_rate; -}; - -#endif /* __PLAT_KEYBOARD_H */ diff --git a/include/linux/platform_data/keypad-ep93xx.h b/include/linux/platform_data/keypad-ep93xx.h deleted file mode 100644 index 3054fced8509..000000000000 --- a/include/linux/platform_data/keypad-ep93xx.h +++ /dev/null @@ -1,32 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __KEYPAD_EP93XX_H -#define __KEYPAD_EP93XX_H - -struct matrix_keymap_data; - -/* flags for the ep93xx_keypad driver */ -#define EP93XX_KEYPAD_DISABLE_3_KEY (1<<0) /* disable 3-key reset */ -#define EP93XX_KEYPAD_DIAG_MODE (1<<1) /* diagnostic mode */ -#define EP93XX_KEYPAD_BACK_DRIVE (1<<2) /* back driving mode */ -#define EP93XX_KEYPAD_TEST_MODE (1<<3) /* scan only column 0 */ -#define EP93XX_KEYPAD_AUTOREPEAT (1<<4) /* enable key autorepeat */ - -/** - * struct ep93xx_keypad_platform_data - platform specific device structure - * @keymap_data: pointer to &matrix_keymap_data - * @debounce: debounce start count; terminal count is 0xff - * @prescale: row/column counter pre-scaler load value - * @flags: see above - */ -struct ep93xx_keypad_platform_data { - struct matrix_keymap_data *keymap_data; - unsigned int debounce; - unsigned int prescale; - unsigned int flags; - unsigned int clk_rate; -}; - -#define EP93XX_MATRIX_ROWS (8) -#define EP93XX_MATRIX_COLS (8) - -#endif /* __KEYPAD_EP93XX_H */ diff --git a/include/linux/platform_data/keypad-nomadik-ske.h b/include/linux/platform_data/keypad-nomadik-ske.h deleted file mode 100644 index 7efabbca1dca..000000000000 --- a/include/linux/platform_data/keypad-nomadik-ske.h +++ /dev/null @@ -1,50 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com> - * - * ux500 Scroll key and Keypad Encoder (SKE) header - */ - -#ifndef __SKE_H -#define __SKE_H - -#include <linux/input/matrix_keypad.h> - -/* register definitions for SKE peripheral */ -#define SKE_CR 0x00 -#define SKE_VAL0 0x04 -#define SKE_VAL1 0x08 -#define SKE_DBCR 0x0C -#define SKE_IMSC 0x10 -#define SKE_RIS 0x14 -#define SKE_MIS 0x18 -#define SKE_ICR 0x1C - -/* - * Keypad module - */ - -/** - * struct keypad_platform_data - structure for platform specific data - * @init: pointer to keypad init function - * @exit: pointer to keypad deinitialisation function - * @keymap_data: matrix scan code table for keycodes - * @krow: maximum number of rows - * @kcol: maximum number of columns - * @debounce_ms: platform specific debounce time - * @no_autorepeat: flag for auto repetition - * @wakeup_enable: allow waking up the system - */ -struct ske_keypad_platform_data { - int (*init)(void); - int (*exit)(void); - const struct matrix_keymap_data *keymap_data; - u8 krow; - u8 kcol; - u8 debounce_ms; - bool no_autorepeat; - bool wakeup_enable; -}; -#endif /*__SKE_KPD_H*/ diff --git a/include/linux/platform_data/keypad-omap.h b/include/linux/platform_data/keypad-omap.h index 3e7c64c854f4..f3f1311cdf3a 100644 --- a/include/linux/platform_data/keypad-omap.h +++ b/include/linux/platform_data/keypad-omap.h @@ -19,9 +19,6 @@ struct omap_kp_platform_data { bool rep; unsigned long delay; bool dbounce; - /* specific to OMAP242x*/ - unsigned int *row_gpios; - unsigned int *col_gpios; }; /* Group (0..3) -- when multiple keys are pressed, only the diff --git a/include/linux/platform_data/keypad-pxa27x.h b/include/linux/platform_data/keypad-pxa27x.h deleted file mode 100644 index a376442b9935..000000000000 --- a/include/linux/platform_data/keypad-pxa27x.h +++ /dev/null @@ -1,73 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_ARCH_PXA27x_KEYPAD_H -#define __ASM_ARCH_PXA27x_KEYPAD_H - -#include <linux/input.h> -#include <linux/input/matrix_keypad.h> - -#define MAX_MATRIX_KEY_ROWS (8) -#define MAX_MATRIX_KEY_COLS (8) -#define MATRIX_ROW_SHIFT (3) -#define MAX_DIRECT_KEY_NUM (8) - -/* pxa3xx keypad platform specific parameters - * - * NOTE: - * 1. direct_key_num indicates the number of keys in the direct keypad - * _plus_ the number of rotary-encoder sensor inputs, this can be - * left as 0 if only rotary encoders are enabled, the driver will - * automatically calculate this - * - * 2. direct_key_map is the key code map for the direct keys, if rotary - * encoder(s) are enabled, direct key 0/1(2/3) will be ignored - * - * 3. rotary can be either interpreted as a relative input event (e.g. - * REL_WHEEL/REL_HWHEEL) or specific keys (e.g. UP/DOWN/LEFT/RIGHT) - * - * 4. matrix key and direct key will use the same debounce_interval by - * default, which should be sufficient in most cases - * - * pxa168 keypad platform specific parameter - * - * NOTE: - * clear_wakeup_event callback is a workaround required to clear the - * keypad interrupt. The keypad wake must be cleared in addition to - * reading the MI/DI bits in the KPC register. - */ -struct pxa27x_keypad_platform_data { - - /* code map for the matrix keys */ - const struct matrix_keymap_data *matrix_keymap_data; - unsigned int matrix_key_rows; - unsigned int matrix_key_cols; - - /* direct keys */ - int direct_key_num; - unsigned int direct_key_map[MAX_DIRECT_KEY_NUM]; - /* the key output may be low active */ - int direct_key_low_active; - /* give board a chance to choose the start direct key */ - unsigned int direct_key_mask; - - /* rotary encoders 0 */ - int enable_rotary0; - int rotary0_rel_code; - int rotary0_up_key; - int rotary0_down_key; - - /* rotary encoders 1 */ - int enable_rotary1; - int rotary1_rel_code; - int rotary1_up_key; - int rotary1_down_key; - - /* key debounce interval */ - unsigned int debounce_interval; - - /* clear wakeup event requirement for pxa168 */ - void (*clear_wakeup_event)(void); -}; - -extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info); - -#endif /* __ASM_ARCH_PXA27x_KEYPAD_H */ diff --git a/include/linux/platform_data/keyscan-davinci.h b/include/linux/platform_data/keyscan-davinci.h deleted file mode 100644 index 260d596ba0af..000000000000 --- a/include/linux/platform_data/keyscan-davinci.h +++ /dev/null @@ -1,29 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2009 Texas Instruments, Inc - * - * Author: Miguel Aguilar <miguel.aguilar@ridgerun.com> - */ - -#ifndef DAVINCI_KEYSCAN_H -#define DAVINCI_KEYSCAN_H - -#include <linux/io.h> - -enum davinci_matrix_types { - DAVINCI_KEYSCAN_MATRIX_4X4, - DAVINCI_KEYSCAN_MATRIX_5X3, -}; - -struct davinci_ks_platform_data { - int (*device_enable)(struct device *dev); - unsigned short *keymap; - u32 keymapsize; - u8 rep:1; - u8 strobe; - u8 interval; - u8 matrix_type; -}; - -#endif - diff --git a/include/linux/platform_data/lcd-mipid.h b/include/linux/platform_data/lcd-mipid.h index 63f05eb23827..4927cfc5158c 100644 --- a/include/linux/platform_data/lcd-mipid.h +++ b/include/linux/platform_data/lcd-mipid.h @@ -15,10 +15,8 @@ enum mipid_test_result { #ifdef __KERNEL__ struct mipid_platform_data { - int nreset_gpio; int data_lines; - void (*shutdown)(struct mipid_platform_data *pdata); void (*set_bklight_level)(struct mipid_platform_data *pdata, int level); int (*get_bklight_level)(struct mipid_platform_data *pdata); diff --git a/include/linux/platform_data/leds-lp55xx.h b/include/linux/platform_data/leds-lp55xx.h index 3441064713a3..3cc8db0b12b5 100644 --- a/include/linux/platform_data/leds-lp55xx.h +++ b/include/linux/platform_data/leds-lp55xx.h @@ -73,6 +73,9 @@ struct lp55xx_platform_data { /* Clock configuration */ u8 clock_mode; + /* Charge pump mode */ + u32 charge_pump_mode; + /* optional enable GPIO */ struct gpio_desc *enable_gpiod; diff --git a/include/linux/platform_data/leds-omap.h b/include/linux/platform_data/leds-omap.h deleted file mode 100644 index dd1a3ec86fe4..000000000000 --- a/include/linux/platform_data/leds-omap.h +++ /dev/null @@ -1,19 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2006 Samsung Electronics - * Kyungmin Park <kyungmin.park@samsung.com> - */ -#ifndef ASMARM_ARCH_LED_H -#define ASMARM_ARCH_LED_H - -struct omap_led_config { - struct led_classdev cdev; - s16 gpio; -}; - -struct omap_led_platform_data { - s16 nr_leds; - struct omap_led_config *leds; -}; - -#endif diff --git a/include/linux/platform_data/leds-s3c24xx.h b/include/linux/platform_data/leds-s3c24xx.h deleted file mode 100644 index 64f8d14876e0..000000000000 --- a/include/linux/platform_data/leds-s3c24xx.h +++ /dev/null @@ -1,18 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (c) 2006 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX - LEDs GPIO connector -*/ - -#ifndef __LEDS_S3C24XX_H -#define __LEDS_S3C24XX_H - -struct s3c24xx_led_platdata { - char *name; - char *def_trigger; -}; - -#endif /* __LEDS_S3C24XX_H */ diff --git a/include/linux/platform_data/lenovo-yoga-c630.h b/include/linux/platform_data/lenovo-yoga-c630.h new file mode 100644 index 000000000000..5d1f9fb33cfc --- /dev/null +++ b/include/linux/platform_data/lenovo-yoga-c630.h @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2022-2024, Linaro Ltd + * Authors: + * Bjorn Andersson + * Dmitry Baryshkov + */ + +#ifndef _LENOVO_YOGA_C630_DATA_H +#define _LENOVO_YOGA_C630_DATA_H + +struct yoga_c630_ec; +struct notifier_block; + +#define YOGA_C630_MOD_NAME "lenovo_yoga_c630" + +#define YOGA_C630_DEV_UCSI "ucsi" +#define YOGA_C630_DEV_PSY "psy" + +int yoga_c630_ec_read8(struct yoga_c630_ec *ec, u8 addr); +int yoga_c630_ec_read16(struct yoga_c630_ec *ec, u8 addr); + +int yoga_c630_ec_register_notify(struct yoga_c630_ec *ec, struct notifier_block *nb); +void yoga_c630_ec_unregister_notify(struct yoga_c630_ec *ec, struct notifier_block *nb); + +#define YOGA_C630_UCSI_WRITE_SIZE 8 +#define YOGA_C630_UCSI_CCI_SIZE 4 +#define YOGA_C630_UCSI_DATA_SIZE 16 +#define YOGA_C630_UCSI_READ_SIZE (YOGA_C630_UCSI_CCI_SIZE + YOGA_C630_UCSI_DATA_SIZE) + +u16 yoga_c630_ec_ucsi_get_version(struct yoga_c630_ec *ec); +int yoga_c630_ec_ucsi_write(struct yoga_c630_ec *ec, + const u8 req[YOGA_C630_UCSI_WRITE_SIZE]); +int yoga_c630_ec_ucsi_read(struct yoga_c630_ec *ec, + u8 resp[YOGA_C630_UCSI_READ_SIZE]); + +#define LENOVO_EC_EVENT_USB 0x20 +#define LENOVO_EC_EVENT_UCSI 0x21 +#define LENOVO_EC_EVENT_HPD 0x22 +#define LENOVO_EC_EVENT_BAT_STATUS 0x24 +#define LENOVO_EC_EVENT_BAT_INFO 0x25 +#define LENOVO_EC_EVENT_BAT_ADPT_STATUS 0x37 + +#endif diff --git a/include/linux/platform_data/lp855x.h b/include/linux/platform_data/lp855x.h index ab222dd05bbc..3b4a891acefe 100644 --- a/include/linux/platform_data/lp855x.h +++ b/include/linux/platform_data/lp855x.h @@ -124,12 +124,12 @@ struct lp855x_rom_data { }; /** - * struct lp855x_platform_data + * struct lp855x_platform_data - lp855 platform-specific data * @name : Backlight driver name. If it is not defined, default name is set. * @device_control : value of DEVICE CONTROL register * @initial_brightness : initial value of backlight brightness * @period_ns : platform specific pwm period value. unit is nano. - Only valid when mode is PWM_BASED. + * Only valid when mode is PWM_BASED. * @size_program : total size of lp855x_rom_data * @rom_data : list of new eeprom/eprom registers */ diff --git a/include/linux/platform_data/lv5207lp.h b/include/linux/platform_data/lv5207lp.h index c9da8d402750..95d85c1394bc 100644 --- a/include/linux/platform_data/lv5207lp.h +++ b/include/linux/platform_data/lv5207lp.h @@ -8,7 +8,7 @@ struct device; struct lv5207lp_platform_data { - struct device *fbdev; + struct device *dev; unsigned int max_value; unsigned int def_value; }; diff --git a/include/linux/platform_data/max6639.h b/include/linux/platform_data/max6639.h deleted file mode 100644 index 65bfdb4fdc15..000000000000 --- a/include/linux/platform_data/max6639.h +++ /dev/null @@ -1,15 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _LINUX_MAX6639_H -#define _LINUX_MAX6639_H - -#include <linux/types.h> - -/* platform data for the MAX6639 temperature sensor and fan control */ - -struct max6639_platform_data { - bool pwm_polarity; /* Polarity low (0) or high (1, default) */ - int ppr; /* Pulses per rotation 1..4 (default == 2) */ - int rpm_range; /* 2000, 4000 (default), 8000 or 16000 */ -}; - -#endif /* _LINUX_MAX6639_H */ diff --git a/include/linux/platform_data/max6697.h b/include/linux/platform_data/max6697.h deleted file mode 100644 index 6fbb70005541..000000000000 --- a/include/linux/platform_data/max6697.h +++ /dev/null @@ -1,33 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * max6697.h - * Copyright (c) 2012 Guenter Roeck <linux@roeck-us.net> - */ - -#ifndef MAX6697_H -#define MAX6697_H - -#include <linux/types.h> - -/* - * For all bit masks: - * bit 0: local temperature - * bit 1..7: remote temperatures - */ -struct max6697_platform_data { - bool smbus_timeout_disable; /* set to disable SMBus timeouts */ - bool extended_range_enable; /* set to enable extended temp range */ - bool beta_compensation; /* set to enable beta compensation */ - u8 alert_mask; /* set bit to 1 to disable alert */ - u8 over_temperature_mask; /* set bit to 1 to disable */ - u8 resistance_cancellation; /* set bit to 0 to disable - * bit mask for MAX6581, - * boolean for other chips - */ - u8 ideality_mask; /* set bit to 0 to disable */ - u8 ideality_value; /* transistor ideality as per - * MAX6581 datasheet - */ -}; - -#endif /* MAX6697_H */ diff --git a/include/linux/platform_data/mcs.h b/include/linux/platform_data/mcs.h deleted file mode 100644 index fcc6f2a1f5c3..000000000000 --- a/include/linux/platform_data/mcs.h +++ /dev/null @@ -1,30 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2009 - 2010 Samsung Electronics Co.Ltd - * Author: Joonyoung Shim <jy0922.shim@samsung.com> - * Author: HeungJun Kim <riverful.kim@samsung.com> - */ - -#ifndef __LINUX_MCS_H -#define __LINUX_MCS_H - -#define MCS_KEY_MAP(v, c) ((((v) & 0xff) << 16) | ((c) & 0xffff)) -#define MCS_KEY_VAL(v) (((v) >> 16) & 0xff) -#define MCS_KEY_CODE(v) ((v) & 0xffff) - -struct mcs_platform_data { - void (*poweron)(bool); - void (*cfg_pin)(void); - - /* touchscreen */ - unsigned int x_size; - unsigned int y_size; - - /* touchkey */ - const u32 *keymap; - unsigned int keymap_size; - unsigned int key_maxval; - bool no_autorepeat; -}; - -#endif /* __LINUX_MCS_H */ diff --git a/include/linux/platform_data/mdio-bcm-unimac.h b/include/linux/platform_data/mdio-bcm-unimac.h index 8a5f9f0b2c52..724e1f57b81f 100644 --- a/include/linux/platform_data/mdio-bcm-unimac.h +++ b/include/linux/platform_data/mdio-bcm-unimac.h @@ -1,11 +1,14 @@ #ifndef __MDIO_BCM_UNIMAC_PDATA_H #define __MDIO_BCM_UNIMAC_PDATA_H +struct clk; + struct unimac_mdio_pdata { u32 phy_mask; int (*wait_func)(void *data); void *wait_func_data; const char *bus_name; + struct clk *clk; }; #define UNIMAC_MDIO_DRV_NAME "unimac-mdio" diff --git a/include/linux/platform_data/media/omap4iss.h b/include/linux/platform_data/media/omap4iss.h deleted file mode 100644 index 2a511a8fcda7..000000000000 --- a/include/linux/platform_data/media/omap4iss.h +++ /dev/null @@ -1,66 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef ARCH_ARM_PLAT_OMAP4_ISS_H -#define ARCH_ARM_PLAT_OMAP4_ISS_H - -#include <linux/i2c.h> - -struct iss_device; - -enum iss_interface_type { - ISS_INTERFACE_CSI2A_PHY1, - ISS_INTERFACE_CSI2B_PHY2, -}; - -/** - * struct iss_csiphy_lane: CSI2 lane position and polarity - * @pos: position of the lane - * @pol: polarity of the lane - */ -struct iss_csiphy_lane { - u8 pos; - u8 pol; -}; - -#define ISS_CSIPHY1_NUM_DATA_LANES 4 -#define ISS_CSIPHY2_NUM_DATA_LANES 1 - -/** - * struct iss_csiphy_lanes_cfg - CSI2 lane configuration - * @data: Configuration of one or two data lanes - * @clk: Clock lane configuration - */ -struct iss_csiphy_lanes_cfg { - struct iss_csiphy_lane data[ISS_CSIPHY1_NUM_DATA_LANES]; - struct iss_csiphy_lane clk; -}; - -/** - * struct iss_csi2_platform_data - CSI2 interface platform data - * @crc: Enable the cyclic redundancy check - * @vpclk_div: Video port output clock control - */ -struct iss_csi2_platform_data { - unsigned crc:1; - unsigned vpclk_div:2; - struct iss_csiphy_lanes_cfg lanecfg; -}; - -struct iss_subdev_i2c_board_info { - struct i2c_board_info *board_info; - int i2c_adapter_id; -}; - -struct iss_v4l2_subdevs_group { - struct iss_subdev_i2c_board_info *subdevs; - enum iss_interface_type interface; - union { - struct iss_csi2_platform_data csi2; - } bus; /* gcc < 4.6.0 chokes on anonymous union initializers */ -}; - -struct iss_platform_data { - struct iss_v4l2_subdevs_group *subdevs; - void (*set_constraints)(struct iss_device *iss, bool enable); -}; - -#endif diff --git a/include/linux/platform_data/media/s5p_hdmi.h b/include/linux/platform_data/media/s5p_hdmi.h deleted file mode 100644 index 457321e917b9..000000000000 --- a/include/linux/platform_data/media/s5p_hdmi.h +++ /dev/null @@ -1,32 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Driver header for S5P HDMI chip. - * - * Copyright (c) 2011 Samsung Electronics, Co. Ltd - * Contact: Tomasz Stanislawski <t.stanislaws@samsung.com> - */ - -#ifndef S5P_HDMI_H -#define S5P_HDMI_H - -struct i2c_board_info; - -/** - * @hdmiphy_bus: controller id for HDMIPHY bus - * @hdmiphy_info: template for HDMIPHY I2C device - * @mhl_bus: controller id for MHL control bus - * @mhl_info: template for MHL I2C device - * @hpd_gpio: GPIO for Hot-Plug-Detect pin - * - * NULL pointer for *_info fields indicates that - * the corresponding chip is not present - */ -struct s5p_hdmi_platform_data { - int hdmiphy_bus; - struct i2c_board_info *hdmiphy_info; - int mhl_bus; - struct i2c_board_info *mhl_info; - int hpd_gpio; -}; - -#endif /* S5P_HDMI_H */ diff --git a/include/linux/platform_data/microchip-ksz.h b/include/linux/platform_data/microchip-ksz.h index ea1cc6d829e9..028781ad4059 100644 --- a/include/linux/platform_data/microchip-ksz.h +++ b/include/linux/platform_data/microchip-ksz.h @@ -20,10 +20,36 @@ #define __MICROCHIP_KSZ_H #include <linux/types.h> +#include <linux/platform_data/dsa.h> + +enum ksz_chip_id { + KSZ8463_CHIP_ID = 0x8463, + KSZ8563_CHIP_ID = 0x8563, + KSZ8795_CHIP_ID = 0x8795, + KSZ8794_CHIP_ID = 0x8794, + KSZ8765_CHIP_ID = 0x8765, + KSZ88X3_CHIP_ID = 0x8830, + KSZ8864_CHIP_ID = 0x8864, + KSZ8895_CHIP_ID = 0x8895, + KSZ9477_CHIP_ID = 0x00947700, + KSZ9896_CHIP_ID = 0x00989600, + KSZ9897_CHIP_ID = 0x00989700, + KSZ9893_CHIP_ID = 0x00989300, + KSZ9563_CHIP_ID = 0x00956300, + KSZ8567_CHIP_ID = 0x00856700, + KSZ9567_CHIP_ID = 0x00956700, + LAN9370_CHIP_ID = 0x00937000, + LAN9371_CHIP_ID = 0x00937100, + LAN9372_CHIP_ID = 0x00937200, + LAN9373_CHIP_ID = 0x00937300, + LAN9374_CHIP_ID = 0x00937400, + LAN9646_CHIP_ID = 0x00964600, +}; struct ksz_platform_data { + /* Must be first such that dsa_register_switch() can access it */ + struct dsa_chip_data cd; u32 chip_id; - u16 enabled_ports; }; #endif diff --git a/include/linux/platform_data/mlxreg.h b/include/linux/platform_data/mlxreg.h index a6bd74e29b6b..f6cca7a035c7 100644 --- a/include/linux/platform_data/mlxreg.h +++ b/include/linux/platform_data/mlxreg.h @@ -209,13 +209,14 @@ struct mlxreg_core_platform_data { * @items: same type components with the hotplug capability; * @irq: platform interrupt number; * @regmap: register map of parent device; - * @counter: number of the components with the hotplug capability; + * @count: number of the components with the hotplug capability; * @cell: location of top aggregation interrupt register; * @mask: top aggregation interrupt common mask; * @cell_low: location of low aggregation interrupt register; * @mask_low: low aggregation interrupt common mask; * @deferred_nr: I2C adapter number must be exist prior probing execution; * @shift_nr: I2C adapter numbers must be incremented by this value; + * @addr: mapped resource address; * @handle: handle to be passed by callback; * @completion_notify: callback to notify when platform driver probing is done; */ @@ -223,13 +224,14 @@ struct mlxreg_core_hotplug_platform_data { struct mlxreg_core_item *items; int irq; void *regmap; - int counter; + int count; u32 cell; u32 mask; u32 cell_low; u32 mask_low; int deferred_nr; int shift_nr; + void __iomem *addr; void *handle; int (*completion_notify)(void *handle, int id); }; diff --git a/include/linux/platform_data/mmc-omap.h b/include/linux/platform_data/mmc-omap.h index 91051e9907f3..054d0c3c5ec5 100644 --- a/include/linux/platform_data/mmc-omap.h +++ b/include/linux/platform_data/mmc-omap.h @@ -20,8 +20,6 @@ struct omap_mmc_platform_data { * maximum frequency on the MMC bus */ unsigned int max_freq; - /* switch the bus to a new slot */ - int (*switch_slot)(struct device *dev, int slot); /* initialize board-specific MMC functionality, can be NULL if * not supported */ int (*init)(struct device *dev); diff --git a/include/linux/platform_data/mmc-pxamci.h b/include/linux/platform_data/mmc-pxamci.h index 7e44e84e7150..652f323b5ecc 100644 --- a/include/linux/platform_data/mmc-pxamci.h +++ b/include/linux/platform_data/mmc-pxamci.h @@ -7,6 +7,7 @@ struct device; struct mmc_host; +struct property_entry; struct pxamci_platform_data { unsigned int ocr_mask; /* available voltages */ @@ -18,7 +19,8 @@ struct pxamci_platform_data { bool gpio_card_ro_invert; /* gpio ro is inverted */ }; -extern void pxa_set_mci_info(struct pxamci_platform_data *info); +extern void pxa_set_mci_info(const struct pxamci_platform_data *info, + const struct property_entry *props); extern void pxa3xx_set_mci2_info(struct pxamci_platform_data *info); extern void pxa3xx_set_mci3_info(struct pxamci_platform_data *info); diff --git a/include/linux/platform_data/mmc-s3cmci.h b/include/linux/platform_data/mmc-s3cmci.h deleted file mode 100644 index bacb86db3112..000000000000 --- a/include/linux/platform_data/mmc-s3cmci.h +++ /dev/null @@ -1,51 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ARCH_MCI_H -#define _ARCH_MCI_H - -/** - * struct s3c24xx_mci_pdata - sd/mmc controller platform data - * @no_wprotect: Set this to indicate there is no write-protect switch. - * @no_detect: Set this if there is no detect switch. - * @wprotect_invert: Invert the default sense of the write protect switch. - * @use_dma: Set to allow the use of DMA. - * @gpio_detect: GPIO number for the card detect line. - * @gpio_wprotect: GPIO number for the write protect line. - * @ocr_avail: The mask of the available power states, non-zero to use. - * @set_power: Callback to control the power mode. - * - * The @gpio_detect is used for card detection when @no_wprotect is unset, - * and the default sense is that 0 returned from gpio_get_value() means - * that a card is inserted. If @detect_invert is set, then the value from - * gpio_get_value() is inverted, which makes 1 mean card inserted. - * - * The driver will use @gpio_wprotect to signal whether the card is write - * protected if @no_wprotect is not set. A 0 returned from gpio_get_value() - * means the card is read/write, and 1 means read-only. The @wprotect_invert - * will invert the value returned from gpio_get_value(). - * - * Card power is set by @ocr_availa, using MCC_VDD_ constants if it is set - * to a non-zero value, otherwise the default of 3.2-3.4V is used. - */ -struct s3c24xx_mci_pdata { - unsigned int no_wprotect:1; - unsigned int no_detect:1; - unsigned int wprotect_invert:1; - unsigned int use_dma:1; - - unsigned long ocr_avail; - void (*set_power)(unsigned char power_mode, - unsigned short vdd); - struct gpio_desc *bus[6]; -}; - -/** - * s3c24xx_mci_set_platdata - set platform data for mmc/sdi device - * @pdata: The platform data - * - * Copy the platform data supplied by @pdata so that this can be marked - * __initdata. - */ -extern void s3c24xx_mci_def_set_power(unsigned char power_mode, unsigned short vdd); -extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata); - -#endif /* _ARCH_NCI_H */ diff --git a/include/linux/platform_data/mmp_audio.h b/include/linux/platform_data/mmp_audio.h deleted file mode 100644 index 83428d8ee18d..000000000000 --- a/include/linux/platform_data/mmp_audio.h +++ /dev/null @@ -1,18 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * MMP Platform AUDIO Management - * - * Copyright (c) 2011 Marvell Semiconductors Inc. - */ - -#ifndef MMP_AUDIO_H -#define MMP_AUDIO_H - -struct mmp_audio_platdata { - u32 period_max_capture; - u32 buffer_max_capture; - u32 period_max_playback; - u32 buffer_max_playback; -}; - -#endif /* MMP_AUDIO_H */ diff --git a/include/linux/platform_data/mouse-pxa930_trkball.h b/include/linux/platform_data/mouse-pxa930_trkball.h deleted file mode 100644 index ba0ac7a30d8c..000000000000 --- a/include/linux/platform_data/mouse-pxa930_trkball.h +++ /dev/null @@ -1,11 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_ARCH_PXA930_TRKBALL_H -#define __ASM_ARCH_PXA930_TRKBALL_H - -struct pxa930_trkball_platform_data { - int x_filter; - int y_filter; -}; - -#endif /* __ASM_ARCH_PXA930_TRKBALL_H */ - diff --git a/include/linux/platform_data/mtd-davinci-aemif.h b/include/linux/platform_data/mtd-davinci-aemif.h deleted file mode 100644 index a49826214a39..000000000000 --- a/include/linux/platform_data/mtd-davinci-aemif.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * TI DaVinci AEMIF support - * - * Copyright 2010 (C) Texas Instruments, Inc. https://www.ti.com/ - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ -#ifndef _MACH_DAVINCI_AEMIF_H -#define _MACH_DAVINCI_AEMIF_H - -#include <linux/platform_device.h> - -#define NRCSR_OFFSET 0x00 -#define AWCCR_OFFSET 0x04 -#define A1CR_OFFSET 0x10 - -#define ACR_ASIZE_MASK 0x3 -#define ACR_EW_MASK BIT(30) -#define ACR_SS_MASK BIT(31) - -/* All timings in nanoseconds */ -struct davinci_aemif_timing { - u8 wsetup; - u8 wstrobe; - u8 whold; - - u8 rsetup; - u8 rstrobe; - u8 rhold; - - u8 ta; -}; - -#endif diff --git a/include/linux/platform_data/mtd-davinci.h b/include/linux/platform_data/mtd-davinci.h deleted file mode 100644 index dd474dd44848..000000000000 --- a/include/linux/platform_data/mtd-davinci.h +++ /dev/null @@ -1,88 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * mach-davinci/nand.h - * - * Copyright © 2006 Texas Instruments. - * - * Ported to 2.6.23 Copyright © 2008 by - * Sander Huijsen <Shuijsen@optelecom-nkf.com> - * Troy Kisky <troy.kisky@boundarydevices.com> - * Dirk Behme <Dirk.Behme@gmail.com> - * - * -------------------------------------------------------------------------- - */ - -#ifndef __ARCH_ARM_DAVINCI_NAND_H -#define __ARCH_ARM_DAVINCI_NAND_H - -#include <linux/mtd/rawnand.h> - -#define NANDFCR_OFFSET 0x60 -#define NANDFSR_OFFSET 0x64 -#define NANDF1ECC_OFFSET 0x70 - -/* 4-bit ECC syndrome registers */ -#define NAND_4BIT_ECC_LOAD_OFFSET 0xbc -#define NAND_4BIT_ECC1_OFFSET 0xc0 -#define NAND_4BIT_ECC2_OFFSET 0xc4 -#define NAND_4BIT_ECC3_OFFSET 0xc8 -#define NAND_4BIT_ECC4_OFFSET 0xcc -#define NAND_ERR_ADD1_OFFSET 0xd0 -#define NAND_ERR_ADD2_OFFSET 0xd4 -#define NAND_ERR_ERRVAL1_OFFSET 0xd8 -#define NAND_ERR_ERRVAL2_OFFSET 0xdc - -/* NOTE: boards don't need to use these address bits - * for ALE/CLE unless they support booting from NAND. - * They're used unless platform data overrides them. - */ -#define MASK_ALE 0x08 -#define MASK_CLE 0x10 - -struct davinci_nand_pdata { /* platform_data */ - uint32_t mask_ale; - uint32_t mask_cle; - - /* - * 0-indexed chip-select number of the asynchronous - * interface to which the NAND device has been connected. - * - * So, if you have NAND connected to CS3 of DA850, you - * will pass '1' here. Since the asynchronous interface - * on DA850 starts from CS2. - */ - uint32_t core_chipsel; - - /* for packages using two chipselects */ - uint32_t mask_chipsel; - - /* board's default static partition info */ - struct mtd_partition *parts; - unsigned nr_parts; - - /* none == NAND_ECC_ENGINE_TYPE_NONE (strongly *not* advised!!) - * soft == NAND_ECC_ENGINE_TYPE_SOFT - * else == NAND_ECC_ENGINE_TYPE_ON_HOST, according to ecc_bits - * - * All DaVinci-family chips support 1-bit hardware ECC. - * Newer ones also support 4-bit ECC, but are awkward - * using it with large page chips. - */ - enum nand_ecc_engine_type engine_type; - enum nand_ecc_placement ecc_placement; - u8 ecc_bits; - - /* e.g. NAND_BUSWIDTH_16 */ - unsigned options; - /* e.g. NAND_BBT_USE_FLASH */ - unsigned bbt_options; - - /* Main and mirror bbt descriptor overrides */ - struct nand_bbt_descr *bbt_td; - struct nand_bbt_descr *bbt_md; - - /* Access timings */ - struct davinci_aemif_timing *timing; -}; - -#endif /* __ARCH_ARM_DAVINCI_NAND_H */ diff --git a/include/linux/platform_data/mtd-nand-s3c2410.h b/include/linux/platform_data/mtd-nand-s3c2410.h deleted file mode 100644 index 25390fc3e795..000000000000 --- a/include/linux/platform_data/mtd-nand-s3c2410.h +++ /dev/null @@ -1,70 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (c) 2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 - NAND device controller platform_device info -*/ - -#ifndef __MTD_NAND_S3C2410_H -#define __MTD_NAND_S3C2410_H - -#include <linux/mtd/rawnand.h> - -/** - * struct s3c2410_nand_set - define a set of one or more nand chips - * @flash_bbt: Openmoko u-boot can create a Bad Block Table - * Setting this flag will allow the kernel to - * look for it at boot time and also skip the NAND - * scan. - * @options: Default value to set into 'struct nand_chip' options. - * @nr_chips: Number of chips in this set - * @nr_partitions: Number of partitions pointed to by @partitions - * @name: Name of set (optional) - * @nr_map: Map for low-layer logical to physical chip numbers (option) - * @partitions: The mtd partition list - * - * define a set of one or more nand chips registered with an unique mtd. Also - * allows to pass flag to the underlying NAND layer. 'disable_ecc' will trigger - * a warning at boot time. - */ -struct s3c2410_nand_set { - unsigned int flash_bbt:1; - - unsigned int options; - int nr_chips; - int nr_partitions; - char *name; - int *nr_map; - struct mtd_partition *partitions; - struct device_node *of_node; -}; - -struct s3c2410_platform_nand { - /* timing information for controller, all times in nanoseconds */ - - int tacls; /* time for active CLE/ALE to nWE/nOE */ - int twrph0; /* active time for nWE/nOE */ - int twrph1; /* time for release CLE/ALE from nWE/nOE inactive */ - - unsigned int ignore_unset_ecc:1; - - enum nand_ecc_engine_type engine_type; - - int nr_sets; - struct s3c2410_nand_set *sets; - - void (*select_chip)(struct s3c2410_nand_set *, - int chip); -}; - -/** - * s3c_nand_set_platdata() - register NAND platform data. - * @nand: The NAND platform data to register with s3c_device_nand. - * - * This function copies the given NAND platform data, @nand and registers - * it with the s3c_device_nand. This allows @nand to be __initdata. -*/ -extern void s3c_nand_set_platdata(struct s3c2410_platform_nand *nand); - -#endif /*__MTD_NAND_S3C2410_H */ diff --git a/include/linux/platform_data/net-cw1200.h b/include/linux/platform_data/net-cw1200.h index c510734405bb..89d0ec6f7d46 100644 --- a/include/linux/platform_data/net-cw1200.h +++ b/include/linux/platform_data/net-cw1200.h @@ -14,8 +14,6 @@ struct cw1200_platform_data_spi { /* All others are optional */ bool have_5ghz; - int reset; /* GPIO to RSTn signal (0 disables) */ - int powerup; /* GPIO to POWERUP signal (0 disables) */ int (*power_ctrl)(const struct cw1200_platform_data_spi *pdata, bool enable); /* Control 3v3 / 1v8 supply */ int (*clk_ctrl)(const struct cw1200_platform_data_spi *pdata, @@ -30,8 +28,6 @@ struct cw1200_platform_data_sdio { /* All others are optional */ bool have_5ghz; bool no_nptb; /* SDIO hardware does not support non-power-of-2-blocksizes */ - int reset; /* GPIO to RSTn signal (0 disables) */ - int powerup; /* GPIO to POWERUP signal (0 disables) */ int irq; /* IRQ line or 0 to use SDIO IRQ */ int (*power_ctrl)(const struct cw1200_platform_data_sdio *pdata, bool enable); /* Control 3v3 / 1v8 supply */ diff --git a/include/linux/platform_data/nfcmrvl.h b/include/linux/platform_data/nfcmrvl.h deleted file mode 100644 index 9e75ac8d19be..000000000000 --- a/include/linux/platform_data/nfcmrvl.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Copyright (C) 2015, Marvell International Ltd. - * - * This software file (the "File") is distributed by Marvell International - * Ltd. under the terms of the GNU General Public License Version 2, June 1991 - * (the "License"). You may use, redistribute and/or modify this File in - * accordance with the terms and conditions of the License, a copy of which - * is available on the worldwide web at - * http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. - * - * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE - * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE - * ARE EXPRESSLY DISCLAIMED. The License provides additional details about - * this warranty disclaimer. - */ - -#ifndef _NFCMRVL_PTF_H_ -#define _NFCMRVL_PTF_H_ - -struct nfcmrvl_platform_data { - /* - * Generic - */ - - /* GPIO that is wired to RESET_N signal */ - int reset_n_io; - /* Tell if transport is muxed in HCI one */ - unsigned int hci_muxed; - - /* - * UART specific - */ - - /* Tell if UART needs flow control at init */ - unsigned int flow_control; - /* Tell if firmware supports break control for power management */ - unsigned int break_control; - - - /* - * I2C specific - */ - - unsigned int irq; - unsigned int irq_polarity; -}; - -#endif /* _NFCMRVL_PTF_H_ */ diff --git a/include/linux/platform_data/omap-twl4030.h b/include/linux/platform_data/omap-twl4030.h index 0dd851ea1c72..7fcb55fe21c9 100644 --- a/include/linux/platform_data/omap-twl4030.h +++ b/include/linux/platform_data/omap-twl4030.h @@ -37,9 +37,6 @@ struct omap_tw4030_pdata { bool has_digimic0; bool has_digimic1; u8 has_linein; - - /* Jack detect GPIO or <= 0 if it is not implemented */ - int jack_detect; }; #endif /* _OMAP_TWL4030_H_ */ diff --git a/include/linux/platform_data/omap1_bl.h b/include/linux/platform_data/omap1_bl.h index 5e8b17d77a5f..3d0bab31a0a9 100644 --- a/include/linux/platform_data/omap1_bl.h +++ b/include/linux/platform_data/omap1_bl.h @@ -6,7 +6,6 @@ struct omap_backlight_config { int default_intensity; - int (*set_power)(struct device *dev, int state); }; #endif diff --git a/include/linux/platform_data/pca953x.h b/include/linux/platform_data/pca953x.h index 96c1a14ab365..3c3787c4d96c 100644 --- a/include/linux/platform_data/pca953x.h +++ b/include/linux/platform_data/pca953x.h @@ -11,21 +11,8 @@ struct pca953x_platform_data { /* number of the first GPIO */ unsigned gpio_base; - /* initial polarity inversion setting */ - u32 invert; - /* interrupt base */ int irq_base; - - void *context; /* param to setup/teardown */ - - int (*setup)(struct i2c_client *client, - unsigned gpio, unsigned ngpio, - void *context); - void (*teardown)(struct i2c_client *client, - unsigned gpio, unsigned ngpio, - void *context); - const char *const *names; }; #endif /* _LINUX_PCA953X_H */ diff --git a/include/linux/platform_data/pcf857x.h b/include/linux/platform_data/pcf857x.h deleted file mode 100644 index 01d0a3ea3aef..000000000000 --- a/include/linux/platform_data/pcf857x.h +++ /dev/null @@ -1,45 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __LINUX_PCF857X_H -#define __LINUX_PCF857X_H - -/** - * struct pcf857x_platform_data - data to set up pcf857x driver - * @gpio_base: number of the chip's first GPIO - * @n_latch: optional bit-inverse of initial register value; if - * you leave this initialized to zero the driver will act - * like the chip was just reset - * @setup: optional callback issued once the GPIOs are valid - * @teardown: optional callback issued before the GPIOs are invalidated - * @context: optional parameter passed to setup() and teardown() - * - * In addition to the I2C_BOARD_INFO() state appropriate to each chip, - * the i2c_board_info used with the pcf875x driver must provide its - * platform_data (pointer to one of these structures) with at least - * the gpio_base value initialized. - * - * The @setup callback may be used with the kind of board-specific glue - * which hands the (now-valid) GPIOs to other drivers, or which puts - * devices in their initial states using these GPIOs. - * - * These GPIO chips are only "quasi-bidirectional"; read the chip specs - * to understand the behavior. They don't have separate registers to - * record which pins are used for input or output, record which output - * values are driven, or provide access to input values. That must be - * inferred by reading the chip's value and knowing the last value written - * to it. If you leave n_latch initialized to zero, that last written - * value is presumed to be all ones (as if the chip were just reset). - */ -struct pcf857x_platform_data { - unsigned gpio_base; - unsigned n_latch; - - int (*setup)(struct i2c_client *client, - int gpio, unsigned ngpio, - void *context); - void (*teardown)(struct i2c_client *client, - int gpio, unsigned ngpio, - void *context); - void *context; -}; - -#endif /* __LINUX_PCF857X_H */ diff --git a/include/linux/platform_data/pxa2xx_udc.h b/include/linux/platform_data/pxa2xx_udc.h index ff9c35dca59d..bc99cc6a3c5f 100644 --- a/include/linux/platform_data/pxa2xx_udc.h +++ b/include/linux/platform_data/pxa2xx_udc.h @@ -25,4 +25,10 @@ struct pxa2xx_udc_mach_info { int gpio_pullup; /* high == pullup activated */ }; +#ifdef CONFIG_PXA27x +extern void pxa27x_clear_otgph(void); +#else +#define pxa27x_clear_otgph() do {} while (0) +#endif + #endif diff --git a/include/linux/platform_data/rtc-ds2404.h b/include/linux/platform_data/rtc-ds2404.h deleted file mode 100644 index 22c53825528f..000000000000 --- a/include/linux/platform_data/rtc-ds2404.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * ds2404.h - platform data structure for the DS2404 RTC. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2012 Sven Schnelle <svens@stackframe.org> - */ - -#ifndef __LINUX_DS2404_H -#define __LINUX_DS2404_H - -struct ds2404_platform_data { - - unsigned int gpio_rst; - unsigned int gpio_clk; - unsigned int gpio_dq; -}; -#endif diff --git a/include/linux/platform_data/rtc-v3020.h b/include/linux/platform_data/rtc-v3020.h deleted file mode 100644 index e55d82cebf80..000000000000 --- a/include/linux/platform_data/rtc-v3020.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * v3020.h - Registers definition and platform data structure for the v3020 RTC. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2006, 8D Technologies inc. - */ -#ifndef __LINUX_V3020_H -#define __LINUX_V3020_H - -/* The v3020 has only one data pin but which one - * is used depends on the board. */ -struct v3020_platform_data { - int leftshift; /* (1<<(leftshift)) & readl() */ - - unsigned int use_gpio:1; - unsigned int gpio_cs; - unsigned int gpio_wr; - unsigned int gpio_rd; - unsigned int gpio_io; -}; - -#define V3020_STATUS_0 0x00 -#define V3020_STATUS_1 0x01 -#define V3020_SECONDS 0x02 -#define V3020_MINUTES 0x03 -#define V3020_HOURS 0x04 -#define V3020_MONTH_DAY 0x05 -#define V3020_MONTH 0x06 -#define V3020_YEAR 0x07 -#define V3020_WEEK_DAY 0x08 -#define V3020_WEEK 0x09 - -#define V3020_IS_COMMAND(val) ((val)>=0x0E) - -#define V3020_CMD_RAM2CLOCK 0x0E -#define V3020_CMD_CLOCK2RAM 0x0F - -#endif /* __LINUX_V3020_H */ diff --git a/include/linux/platform_data/s3c-hsudc.h b/include/linux/platform_data/s3c-hsudc.h deleted file mode 100644 index a170939832d5..000000000000 --- a/include/linux/platform_data/s3c-hsudc.h +++ /dev/null @@ -1,33 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * S3C24XX USB 2.0 High-speed USB controller gadget driver - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * The S3C24XX USB 2.0 high-speed USB controller supports upto 9 endpoints. - * Each endpoint can be configured as either in or out endpoint. Endpoints - * can be configured for Bulk or Interrupt transfer mode. -*/ - -#ifndef __LINUX_USB_S3C_HSUDC_H -#define __LINUX_USB_S3C_HSUDC_H - -/** - * s3c24xx_hsudc_platdata - Platform data for USB High-Speed gadget controller. - * @epnum: Number of endpoints to be instantiated by the controller driver. - * @gpio_init: Platform specific USB related GPIO initialization. - * @gpio_uninit: Platform specific USB releted GPIO uninitialzation. - * - * Representation of platform data for the S3C24XX USB 2.0 High Speed gadget - * controllers. - */ -struct s3c24xx_hsudc_platdata { - unsigned int epnum; - void (*gpio_init)(void); - void (*gpio_uninit)(void); - void (*phy_init)(void); - void (*phy_uninit)(void); -}; - -#endif /* __LINUX_USB_S3C_HSUDC_H */ diff --git a/include/linux/platform_data/sa11x0-serial.h b/include/linux/platform_data/sa11x0-serial.h index 8b79ab08af45..a88096bc74e4 100644 --- a/include/linux/platform_data/sa11x0-serial.h +++ b/include/linux/platform_data/sa11x0-serial.h @@ -10,7 +10,6 @@ #define SA11X0_SERIAL_H struct uart_port; -struct uart_info; /* * This is a temporary structure for registering these diff --git a/include/linux/platform_data/shmob_drm.h b/include/linux/platform_data/shmob_drm.h index d661399b217d..6c19d4fbbe39 100644 --- a/include/linux/platform_data/shmob_drm.h +++ b/include/linux/platform_data/shmob_drm.h @@ -10,7 +10,7 @@ #ifndef __SHMOB_DRM_H__ #define __SHMOB_DRM_H__ -#include <drm/drm_mode.h> +#include <video/videomode.h> enum shmob_drm_clk_source { SHMOB_DRM_CLK_BUS, @@ -18,72 +18,21 @@ enum shmob_drm_clk_source { SHMOB_DRM_CLK_EXTERNAL, }; -enum shmob_drm_interface { - SHMOB_DRM_IFACE_RGB8, /* 24bpp, 8:8:8 */ - SHMOB_DRM_IFACE_RGB9, /* 18bpp, 9:9 */ - SHMOB_DRM_IFACE_RGB12A, /* 24bpp, 12:12 */ - SHMOB_DRM_IFACE_RGB12B, /* 12bpp */ - SHMOB_DRM_IFACE_RGB16, /* 16bpp */ - SHMOB_DRM_IFACE_RGB18, /* 18bpp */ - SHMOB_DRM_IFACE_RGB24, /* 24bpp */ - SHMOB_DRM_IFACE_YUV422, /* 16bpp */ - SHMOB_DRM_IFACE_SYS8A, /* 24bpp, 8:8:8 */ - SHMOB_DRM_IFACE_SYS8B, /* 18bpp, 8:8:2 */ - SHMOB_DRM_IFACE_SYS8C, /* 18bpp, 2:8:8 */ - SHMOB_DRM_IFACE_SYS8D, /* 16bpp, 8:8 */ - SHMOB_DRM_IFACE_SYS9, /* 18bpp, 9:9 */ - SHMOB_DRM_IFACE_SYS12, /* 24bpp, 12:12 */ - SHMOB_DRM_IFACE_SYS16A, /* 16bpp */ - SHMOB_DRM_IFACE_SYS16B, /* 18bpp, 16:2 */ - SHMOB_DRM_IFACE_SYS16C, /* 18bpp, 2:16 */ - SHMOB_DRM_IFACE_SYS18, /* 18bpp */ - SHMOB_DRM_IFACE_SYS24, /* 24bpp */ -}; - -struct shmob_drm_backlight_data { - const char *name; - int max_brightness; - int (*get_brightness)(void); - int (*set_brightness)(int brightness); -}; - struct shmob_drm_panel_data { unsigned int width_mm; /* Panel width in mm */ unsigned int height_mm; /* Panel height in mm */ - struct drm_mode_modeinfo mode; + struct videomode mode; }; -struct shmob_drm_sys_interface_data { - unsigned int read_latch:6; - unsigned int read_setup:8; - unsigned int read_cycle:8; - unsigned int read_strobe:8; - unsigned int write_setup:8; - unsigned int write_cycle:8; - unsigned int write_strobe:8; - unsigned int cs_setup:3; - unsigned int vsync_active_high:1; - unsigned int vsync_dir_input:1; -}; - -#define SHMOB_DRM_IFACE_FL_DWPOL (1 << 0) /* Rising edge dot clock data latch */ -#define SHMOB_DRM_IFACE_FL_DIPOL (1 << 1) /* Active low display enable */ -#define SHMOB_DRM_IFACE_FL_DAPOL (1 << 2) /* Active low display data */ -#define SHMOB_DRM_IFACE_FL_HSCNT (1 << 3) /* Disable HSYNC during VBLANK */ -#define SHMOB_DRM_IFACE_FL_DWCNT (1 << 4) /* Disable dotclock during blanking */ - struct shmob_drm_interface_data { - enum shmob_drm_interface interface; - struct shmob_drm_sys_interface_data sys; + unsigned int bus_fmt; /* MEDIA_BUS_FMT_* */ unsigned int clk_div; - unsigned int flags; }; struct shmob_drm_platform_data { enum shmob_drm_clk_source clk_source; struct shmob_drm_interface_data iface; struct shmob_drm_panel_data panel; - struct shmob_drm_backlight_data backlight; }; #endif /* __SHMOB_DRM_H__ */ diff --git a/include/linux/platform_data/sht3x.h b/include/linux/platform_data/sht3x.h deleted file mode 100644 index 14680d2a98f7..000000000000 --- a/include/linux/platform_data/sht3x.h +++ /dev/null @@ -1,15 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2016 Sensirion AG, Switzerland - * Author: David Frey <david.frey@sensirion.com> - * Author: Pascal Sachs <pascal.sachs@sensirion.com> - */ - -#ifndef __SHT3X_H_ -#define __SHT3X_H_ - -struct sht3x_platform_data { - bool blocking_io; - bool high_precision; -}; -#endif /* __SHT3X_H_ */ diff --git a/include/linux/platform_data/si5351.h b/include/linux/platform_data/si5351.h index c71a2dd66143..5f412a615532 100644 --- a/include/linux/platform_data/si5351.h +++ b/include/linux/platform_data/si5351.h @@ -105,10 +105,12 @@ struct si5351_clkout_config { * @clk_xtal: xtal input clock * @clk_clkin: clkin input clock * @pll_src: array of pll source clock setting + * @pll_reset: array indicating if plls should be reset after setting the rate * @clkout: array of clkout configuration */ struct si5351_platform_data { enum si5351_pll_src pll_src[2]; + bool pll_reset[2]; struct si5351_clkout_config clkout[8]; }; diff --git a/include/linux/platform_data/spi-davinci.h b/include/linux/platform_data/spi-davinci.h deleted file mode 100644 index 2cb5cc70fd9d..000000000000 --- a/include/linux/platform_data/spi-davinci.h +++ /dev/null @@ -1,73 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright 2009 Texas Instruments. - */ - -#ifndef __ARCH_ARM_DAVINCI_SPI_H -#define __ARCH_ARM_DAVINCI_SPI_H - -#include <linux/platform_data/edma.h> - -#define SPI_INTERN_CS 0xFF - -enum { - SPI_VERSION_1, /* For DM355/DM365/DM6467 */ - SPI_VERSION_2, /* For DA8xx */ -}; - -/** - * davinci_spi_platform_data - Platform data for SPI master device on DaVinci - * - * @version: version of the SPI IP. Different DaVinci devices have slightly - * varying versions of the same IP. - * @num_chipselect: number of chipselects supported by this SPI master - * @intr_line: interrupt line used to connect the SPI IP to the ARM interrupt - * controller withn the SoC. Possible values are 0 and 1. - * @cshold_bug: set this to true if the SPI controller on your chip requires - * a write to CSHOLD bit in between transfers (like in DM355). - * @dma_event_q: DMA event queue to use if SPI_IO_TYPE_DMA is used for any - * device on the bus. - */ -struct davinci_spi_platform_data { - u8 version; - u8 num_chipselect; - u8 intr_line; - u8 prescaler_limit; - bool cshold_bug; - enum dma_event_q dma_event_q; -}; - -/** - * davinci_spi_config - Per-chip-select configuration for SPI slave devices - * - * @wdelay: amount of delay between transmissions. Measured in number of - * SPI module clocks. - * @odd_parity: polarity of parity flag at the end of transmit data stream. - * 0 - odd parity, 1 - even parity. - * @parity_enable: enable transmission of parity at end of each transmit - * data stream. - * @io_type: type of IO transfer. Choose between polled, interrupt and DMA. - * @timer_disable: disable chip-select timers (setup and hold) - * @c2tdelay: chip-select setup time. Measured in number of SPI module clocks. - * @t2cdelay: chip-select hold time. Measured in number of SPI module clocks. - * @t2edelay: transmit data finished to SPI ENAn pin inactive time. Measured - * in number of SPI clocks. - * @c2edelay: chip-select active to SPI ENAn signal active time. Measured in - * number of SPI clocks. - */ -struct davinci_spi_config { - u8 wdelay; - u8 odd_parity; - u8 parity_enable; -#define SPI_IO_TYPE_INTR 0 -#define SPI_IO_TYPE_POLL 1 -#define SPI_IO_TYPE_DMA 2 - u8 io_type; - u8 timer_disable; - u8 c2tdelay; - u8 t2cdelay; - u8 t2edelay; - u8 c2edelay; -}; - -#endif /* __ARCH_ARM_DAVINCI_SPI_H */ diff --git a/include/linux/platform_data/spi-ep93xx.h b/include/linux/platform_data/spi-ep93xx.h deleted file mode 100644 index b439f2a896e0..000000000000 --- a/include/linux/platform_data/spi-ep93xx.h +++ /dev/null @@ -1,15 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_MACH_EP93XX_SPI_H -#define __ASM_MACH_EP93XX_SPI_H - -struct spi_device; - -/** - * struct ep93xx_spi_info - EP93xx specific SPI descriptor - * @use_dma: use DMA for the transfers - */ -struct ep93xx_spi_info { - bool use_dma; -}; - -#endif /* __ASM_MACH_EP93XX_SPI_H */ diff --git a/include/linux/platform_data/spi-omap2-mcspi.h b/include/linux/platform_data/spi-omap2-mcspi.h index 3b400b1919a9..9e3c15b4ac91 100644 --- a/include/linux/platform_data/spi-omap2-mcspi.h +++ b/include/linux/platform_data/spi-omap2-mcspi.h @@ -16,9 +16,6 @@ struct omap2_mcspi_platform_config { struct omap2_mcspi_device_config { unsigned turbo_mode:1; - - /* toggle chip select after every word */ - unsigned cs_per_word:1; }; #endif diff --git a/include/linux/platform_data/spi-s3c64xx.h b/include/linux/platform_data/spi-s3c64xx.h index 5df1ace6d2c9..1d6e6c424fc6 100644 --- a/include/linux/platform_data/spi-s3c64xx.h +++ b/include/linux/platform_data/spi-s3c64xx.h @@ -29,12 +29,14 @@ struct s3c64xx_spi_csinfo { * struct s3c64xx_spi_info - SPI Controller defining structure * @src_clk_nr: Clock source index for the CLK_CFG[SPI_CLKSEL] field. * @num_cs: Number of CS this controller emulates. + * @no_cs: Used when CS line is not connected. * @cfg_gpio: Configure pins for this SPI controller. */ struct s3c64xx_spi_info { int src_clk_nr; int num_cs; bool no_cs; + bool polling; int (*cfg_gpio)(void); }; diff --git a/include/linux/platform_data/st_sensors_pdata.h b/include/linux/platform_data/st_sensors_pdata.h index 897051e51b78..a657830232ae 100644 --- a/include/linux/platform_data/st_sensors_pdata.h +++ b/include/linux/platform_data/st_sensors_pdata.h @@ -15,7 +15,7 @@ * @drdy_int_pin: Redirect DRDY on pin 1 (1) or pin 2 (2). * Available only for accelerometer, magnetometer and pressure sensors. * Accelerometer DRDY on LSM330 available only on pin 1 (see datasheet). - * Magnetometer DRDY is supported only on LSM9DS0. + * Magnetometer DRDY is supported only on LSM9DS0 and LSM303D. * @open_drain: set the interrupt line to be open drain if possible. * @spi_3wire: enable spi-3wire mode. * @pullups: enable/disable i2c controller pullup resistors. diff --git a/include/linux/platform_data/syscon.h b/include/linux/platform_data/syscon.h deleted file mode 100644 index 2c089dd3e2bd..000000000000 --- a/include/linux/platform_data/syscon.h +++ /dev/null @@ -1,9 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef PLATFORM_DATA_SYSCON_H -#define PLATFORM_DATA_SYSCON_H - -struct syscon_platform_data { - const char *label; -}; - -#endif diff --git a/include/linux/platform_data/ti-aemif.h b/include/linux/platform_data/ti-aemif.h deleted file mode 100644 index 77625251df07..000000000000 --- a/include/linux/platform_data/ti-aemif.h +++ /dev/null @@ -1,45 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * TI DaVinci AEMIF platform glue. - * - * Copyright (C) 2017 BayLibre SAS - * - * Author: - * Bartosz Golaszewski <bgolaszewski@baylibre.com> - */ - -#ifndef __TI_DAVINCI_AEMIF_DATA_H__ -#define __TI_DAVINCI_AEMIF_DATA_H__ - -#include <linux/of_platform.h> - -/** - * struct aemif_abus_data - Async bus configuration parameters. - * - * @cs - Chip-select number. - */ -struct aemif_abus_data { - u32 cs; -}; - -/** - * struct aemif_platform_data - Data to set up the TI aemif driver. - * - * @dev_lookup: of_dev_auxdata passed to of_platform_populate() for aemif - * subdevices. - * @cs_offset: Lowest allowed chip-select number. - * @abus_data: Array of async bus configuration entries. - * @num_abus_data: Number of abus entries. - * @sub_devices: Array of platform subdevices. - * @num_sub_devices: Number of subdevices. - */ -struct aemif_platform_data { - struct of_dev_auxdata *dev_lookup; - u32 cs_offset; - struct aemif_abus_data *abus_data; - size_t num_abus_data; - struct platform_device *sub_devices; - size_t num_sub_devices; -}; - -#endif /* __TI_DAVINCI_AEMIF_DATA_H__ */ diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h index eb556f988d57..d8f15770a522 100644 --- a/include/linux/platform_data/ti-sysc.h +++ b/include/linux/platform_data/ti-sysc.h @@ -71,7 +71,6 @@ struct sysc_regbits { #define SYSC_QUIRK_SWSUP_SIDLE_ACT BIT(12) #define SYSC_QUIRK_SWSUP_SIDLE BIT(11) #define SYSC_QUIRK_EXT_OPT_CLOCK BIT(10) -#define SYSC_QUIRK_LEGACY_IDLE BIT(9) #define SYSC_QUIRK_RESET_STATUS BIT(8) #define SYSC_QUIRK_NO_IDLE BIT(7) #define SYSC_QUIRK_NO_IDLE_ON_INIT BIT(6) diff --git a/include/linux/platform_data/tmio.h b/include/linux/platform_data/tmio.h new file mode 100644 index 000000000000..426291713b83 --- /dev/null +++ b/include/linux/platform_data/tmio.h @@ -0,0 +1,65 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef MFD_TMIO_H +#define MFD_TMIO_H + +#include <linux/platform_device.h> +#include <linux/types.h> + +/* TMIO MMC platform flags */ + +/* + * Some controllers can support a 2-byte block size when the bus width is + * configured in 4-bit mode. + */ +#define TMIO_MMC_BLKSZ_2BYTES BIT(1) + +/* Some controllers can support SDIO IRQ signalling */ +#define TMIO_MMC_SDIO_IRQ BIT(2) + +/* Some features are only available or tested on R-Car Gen2 or later */ +#define TMIO_MMC_MIN_RCAR2 BIT(3) + +/* + * Some controllers require waiting for the SD bus to become idle before + * writing to some registers. + */ +#define TMIO_MMC_HAS_IDLE_WAIT BIT(4) + +/* + * Use the busy timeout feature. Probably all TMIO versions support it. Yet, + * we don't have documentation for old variants, so we enable only known good + * variants with this flag. Can be removed once all variants are known good. + */ +#define TMIO_MMC_USE_BUSY_TIMEOUT BIT(5) + +/* Some controllers have CMD12 automatically issue/non-issue register */ +#define TMIO_MMC_HAVE_CMD12_CTRL BIT(7) + +/* Controller has some SDIO status bits which must be 1 */ +#define TMIO_MMC_SDIO_STATUS_SETBITS BIT(8) + +/* Some controllers have a 32-bit wide data port register */ +#define TMIO_MMC_32BIT_DATA_PORT BIT(9) + +/* Some controllers allows to set SDx actual clock */ +#define TMIO_MMC_CLK_ACTUAL BIT(10) + +/* Some controllers have a CBSY bit */ +#define TMIO_MMC_HAVE_CBSY BIT(11) + +/* Some controllers have a 64-bit wide data port register */ +#define TMIO_MMC_64BIT_DATA_PORT BIT(12) + +struct tmio_mmc_data { + void *chan_priv_tx; + void *chan_priv_rx; + unsigned int hclk; + unsigned long capabilities; + unsigned long capabilities2; + unsigned long flags; + u32 ocr_mask; /* available voltages */ + dma_addr_t dma_rx_offset; + unsigned int max_blk_count; + unsigned short max_segs; +}; +#endif diff --git a/include/linux/platform_data/touchscreen-s3c2410.h b/include/linux/platform_data/touchscreen-s3c2410.h deleted file mode 100644 index bf8d3b9d7c6a..000000000000 --- a/include/linux/platform_data/touchscreen-s3c2410.h +++ /dev/null @@ -1,22 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org> -*/ - -#ifndef __TOUCHSCREEN_S3C2410_H -#define __TOUCHSCREEN_S3C2410_H - -struct s3c2410_ts_mach_info { - int delay; - int presc; - int oversampling_shift; - void (*cfg_gpio)(struct platform_device *dev); -}; - -extern void s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *); -extern void s3c64xx_ts_set_platdata(struct s3c2410_ts_mach_info *); - -/* defined by architecture to configure gpio */ -extern void s3c24xx_ts_cfg_gpio(struct platform_device *dev); - -#endif /*__TOUCHSCREEN_S3C2410_H */ diff --git a/include/linux/platform_data/tsl2563.h b/include/linux/platform_data/tsl2563.h deleted file mode 100644 index 9cf9309c3f24..000000000000 --- a/include/linux/platform_data/tsl2563.h +++ /dev/null @@ -1,9 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __LINUX_TSL2563_H -#define __LINUX_TSL2563_H - -struct tsl2563_platform_data { - int cover_comp_gain; -}; - -#endif /* __LINUX_TSL2563_H */ diff --git a/include/linux/platform_data/uio_pruss.h b/include/linux/platform_data/uio_pruss.h deleted file mode 100644 index f76fa393b802..000000000000 --- a/include/linux/platform_data/uio_pruss.h +++ /dev/null @@ -1,18 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * include/linux/platform_data/uio_pruss.h - * - * Platform data for uio_pruss driver - * - * Copyright (C) 2010-11 Texas Instruments Incorporated - https://www.ti.com/ - */ - -#ifndef _UIO_PRUSS_H_ -#define _UIO_PRUSS_H_ - -/* To configure the PRUSS INTC base offset for UIO driver */ -struct uio_pruss_pdata { - u32 pintc_base; - struct gen_pool *sram_pool; -}; -#endif /* _UIO_PRUSS_H_ */ diff --git a/include/linux/platform_data/usb-davinci.h b/include/linux/platform_data/usb-davinci.h deleted file mode 100644 index 879f5c78b91a..000000000000 --- a/include/linux/platform_data/usb-davinci.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * USB related definitions - * - * Copyright (C) 2009 MontaVista Software, Inc. <source@mvista.com> - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_USB_H -#define __ASM_ARCH_USB_H - -/* Passed as the platform data to the OHCI driver */ -struct da8xx_ohci_root_hub { - /* Time from power on to power good (in 2 ms units) */ - u8 potpgt; -}; - -void davinci_setup_usb(unsigned mA, unsigned potpgt_ms); - -#endif /* ifndef __ASM_ARCH_USB_H */ diff --git a/include/linux/platform_data/usb-pxa3xx-ulpi.h b/include/linux/platform_data/usb-pxa3xx-ulpi.h deleted file mode 100644 index 4d31a5cbdeb1..000000000000 --- a/include/linux/platform_data/usb-pxa3xx-ulpi.h +++ /dev/null @@ -1,32 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * PXA3xx U2D header - * - * Copyright (C) 2010 CompuLab Ltd. - * - * Igor Grinberg <grinberg@compulab.co.il> - */ -#ifndef __PXA310_U2D__ -#define __PXA310_U2D__ - -#include <linux/usb/ulpi.h> - -struct pxa3xx_u2d_platform_data { - -#define ULPI_SER_6PIN (1 << 0) -#define ULPI_SER_3PIN (1 << 1) - unsigned int ulpi_mode; - - int (*init)(struct device *); - void (*exit)(struct device *); -}; - - -/* Start PXA3xx U2D host */ -int pxa3xx_u2d_start_hc(struct usb_bus *host); -/* Stop PXA3xx U2D host */ -void pxa3xx_u2d_stop_hc(struct usb_bus *host); - -extern void pxa3xx_set_u2d_info(struct pxa3xx_u2d_platform_data *info); - -#endif /* __PXA310_U2D__ */ diff --git a/include/linux/platform_data/usb-s3c2410_udc.h b/include/linux/platform_data/usb-s3c2410_udc.h deleted file mode 100644 index c0fbe1fe3426..000000000000 --- a/include/linux/platform_data/usb-s3c2410_udc.h +++ /dev/null @@ -1,33 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* arch/arm/plat-samsung/include/plat/udc.h - * - * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org> - * - * Changelog: - * 14-Mar-2005 RTP Created file - * 02-Aug-2005 RTP File rename - * 07-Sep-2005 BJD Minor cleanups, changed cmd to enum - * 18-Jan-2007 HMW Add per-platform vbus_draw function -*/ - -#ifndef __ASM_ARM_ARCH_UDC_H -#define __ASM_ARM_ARCH_UDC_H - -enum s3c2410_udc_cmd_e { - S3C2410_UDC_P_ENABLE = 1, /* Pull-up enable */ - S3C2410_UDC_P_DISABLE = 2, /* Pull-up disable */ - S3C2410_UDC_P_RESET = 3, /* UDC reset, in case of */ -}; - -struct s3c2410_udc_mach_info { - void (*udc_command)(enum s3c2410_udc_cmd_e); - void (*vbus_draw)(unsigned int ma); -}; - -extern void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *); - -struct s3c24xx_hsudc_platdata; - -extern void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd); - -#endif /* __ASM_ARM_ARCH_UDC_H */ diff --git a/include/linux/platform_data/usb3503.h b/include/linux/platform_data/usb3503.h index d01ef97ddf36..f3c942f396f8 100644 --- a/include/linux/platform_data/usb3503.h +++ b/include/linux/platform_data/usb3503.h @@ -12,6 +12,7 @@ enum usb3503_mode { USB3503_MODE_UNKNOWN, USB3503_MODE_HUB, USB3503_MODE_STANDBY, + USB3503_MODE_BYPASS, }; struct usb3503_platform_data { diff --git a/include/linux/platform_data/video-mx3fb.h b/include/linux/platform_data/video-mx3fb.h deleted file mode 100644 index d03dc322a616..000000000000 --- a/include/linux/platform_data/video-mx3fb.h +++ /dev/null @@ -1,50 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2008 - * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> - */ - -#ifndef __ASM_ARCH_MX3FB_H__ -#define __ASM_ARCH_MX3FB_H__ - -#include <linux/device.h> -#include <linux/fb.h> - -/* Proprietary FB_SYNC_ flags */ -#define FB_SYNC_OE_ACT_HIGH 0x80000000 -#define FB_SYNC_CLK_INVERT 0x40000000 -#define FB_SYNC_DATA_INVERT 0x20000000 -#define FB_SYNC_CLK_IDLE_EN 0x10000000 -#define FB_SYNC_SHARP_MODE 0x08000000 -#define FB_SYNC_SWAP_RGB 0x04000000 -#define FB_SYNC_CLK_SEL_EN 0x02000000 - -/* - * Specify the way your display is connected. The IPU can arbitrarily - * map the internal colors to the external data lines. We only support - * the following mappings at the moment. - */ -enum disp_data_mapping { - /* blue -> d[0..5], green -> d[6..11], red -> d[12..17] */ - IPU_DISP_DATA_MAPPING_RGB666, - /* blue -> d[0..4], green -> d[5..10], red -> d[11..15] */ - IPU_DISP_DATA_MAPPING_RGB565, - /* blue -> d[0..7], green -> d[8..15], red -> d[16..23] */ - IPU_DISP_DATA_MAPPING_RGB888, -}; - -/** - * struct mx3fb_platform_data - mx3fb platform data - * - * @dma_dev: pointer to the dma-device, used for dma-slave connection - * @mode: pointer to a platform-provided per mxc_register_fb() videomode - */ -struct mx3fb_platform_data { - struct device *dma_dev; - const char *name; - const struct fb_videomode *mode; - int num_modes; - enum disp_data_mapping disp_data_fmt; -}; - -#endif diff --git a/include/linux/platform_data/video-pxafb.h b/include/linux/platform_data/video-pxafb.h index 6333bac166a5..38c24c77ba43 100644 --- a/include/linux/platform_data/video-pxafb.h +++ b/include/linux/platform_data/video-pxafb.h @@ -150,7 +150,6 @@ struct pxafb_mach_info { }; void pxa_set_fb_info(struct device *, struct pxafb_mach_info *); -unsigned long pxafb_get_hsync_time(struct device *dev); /* smartpanel related */ #define SMART_CMD_A0 (0x1 << 8) diff --git a/include/linux/platform_data/voltage-omap.h b/include/linux/platform_data/voltage-omap.h index 43e8da9fb447..6d74e507dbd2 100644 --- a/include/linux/platform_data/voltage-omap.h +++ b/include/linux/platform_data/voltage-omap.h @@ -29,7 +29,6 @@ struct omap_volt_data { struct voltagedomain; struct voltagedomain *voltdm_lookup(const char *name); -int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt); unsigned long voltdm_get_voltage(struct voltagedomain *voltdm); struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, unsigned long volt); diff --git a/include/linux/platform_data/x86/amd-fch.h b/include/linux/platform_data/x86/amd-fch.h new file mode 100644 index 000000000000..2cf5153edbc2 --- /dev/null +++ b/include/linux/platform_data/x86/amd-fch.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_X86_AMD_FCH_H_ +#define _ASM_X86_AMD_FCH_H_ + +#define FCH_PM_BASE 0xFED80300 + +/* Register offsets from PM base: */ +#define FCH_PM_DECODEEN 0x00 +#define FCH_PM_DECODEEN_SMBUS0SEL GENMASK(20, 19) +#define FCH_PM_SCRATCH 0x80 +#define FCH_PM_S5_RESET_STATUS 0xC0 + +#endif /* _ASM_X86_AMD_FCH_H_ */ diff --git a/include/linux/platform_data/x86/asus-wmi-leds-ids.h b/include/linux/platform_data/x86/asus-wmi-leds-ids.h new file mode 100644 index 000000000000..034a039c4e37 --- /dev/null +++ b/include/linux/platform_data/x86/asus-wmi-leds-ids.h @@ -0,0 +1,50 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __PLATFORM_DATA_X86_ASUS_WMI_LEDS_IDS_H +#define __PLATFORM_DATA_X86_ASUS_WMI_LEDS_IDS_H + +#include <linux/dmi.h> +#include <linux/types.h> + +/* To be used by both hid-asus and asus-wmi to determine which controls kbd_brightness */ +#if IS_REACHABLE(CONFIG_ASUS_WMI) || IS_REACHABLE(CONFIG_HID_ASUS) +static const struct dmi_system_id asus_use_hid_led_dmi_ids[] = { + { + .matches = { + DMI_MATCH(DMI_PRODUCT_FAMILY, "ROG Zephyrus"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_PRODUCT_FAMILY, "ROG Strix"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_PRODUCT_FAMILY, "ROG Flow"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_PRODUCT_FAMILY, "ProArt P16"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "GA403U"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "GU605M"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "RC71L"), + }, + }, + { }, +}; +#endif + +#endif /* __PLATFORM_DATA_X86_ASUS_WMI_LEDS_IDS_H */ diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h index 28234dc9fa6a..419491d4abca 100644 --- a/include/linux/platform_data/x86/asus-wmi.h +++ b/include/linux/platform_data/x86/asus-wmi.h @@ -5,6 +5,9 @@ #include <linux/errno.h> #include <linux/types.h> +#define ASUS_WMI_MGMT_GUID "97845ED0-4E6D-11DE-8A39-0800200C9A66" +#define ASUS_ACPI_UID_ASUSWMI "ASUSWMI" + /* WMI Methods */ #define ASUS_WMI_METHODID_SPEC 0x43455053 /* BIOS SPECification */ #define ASUS_WMI_METHODID_SFBD 0x44424653 /* Set First Boot Device */ @@ -51,6 +54,10 @@ #define ASUS_WMI_DEVID_LED6 0x00020016 #define ASUS_WMI_DEVID_MICMUTE_LED 0x00040017 +/* Disable Camera LED */ +#define ASUS_WMI_DEVID_CAMERA_LED_NEG 0x00060078 /* 0 = on (unused) */ +#define ASUS_WMI_DEVID_CAMERA_LED 0x00060079 /* 1 = on */ + /* Backlight and Brightness */ #define ASUS_WMI_DEVID_ALS_ENABLE 0x00050001 /* Ambient Light Sensor */ #define ASUS_WMI_DEVID_BACKLIGHT 0x00050011 @@ -58,14 +65,24 @@ #define ASUS_WMI_DEVID_KBD_BACKLIGHT 0x00050021 #define ASUS_WMI_DEVID_LIGHT_SENSOR 0x00050022 /* ?? */ #define ASUS_WMI_DEVID_LIGHTBAR 0x00050025 +#define ASUS_WMI_DEVID_OOBE 0x0005002F +/* This can only be used to disable the screen, not re-enable */ +#define ASUS_WMI_DEVID_SCREENPAD_POWER 0x00050031 +/* Writing a brightness re-enables the screen if disabled */ +#define ASUS_WMI_DEVID_SCREENPAD_LIGHT 0x00050032 #define ASUS_WMI_DEVID_FAN_BOOST_MODE 0x00110018 #define ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY 0x00120075 +#define ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO 0x00110019 /* Misc */ +#define ASUS_WMI_DEVID_PANEL_HD 0x0005001C #define ASUS_WMI_DEVID_PANEL_OD 0x00050019 #define ASUS_WMI_DEVID_CAMERA 0x00060013 #define ASUS_WMI_DEVID_LID_FLIP 0x00060062 #define ASUS_WMI_DEVID_LID_FLIP_ROG 0x00060077 +#define ASUS_WMI_DEVID_MINI_LED_MODE 0x0005001E +#define ASUS_WMI_DEVID_MINI_LED_MODE2 0x0005002E +#define ASUS_WMI_DEVID_SCREEN_AUTO_BRIGHTNESS 0x0005002A /* Storage */ #define ASUS_WMI_DEVID_CARDREADER 0x00080013 @@ -80,8 +97,19 @@ #define ASUS_WMI_DEVID_FAN_CTRL 0x00110012 /* deprecated */ #define ASUS_WMI_DEVID_CPU_FAN_CTRL 0x00110013 #define ASUS_WMI_DEVID_GPU_FAN_CTRL 0x00110014 +#define ASUS_WMI_DEVID_MID_FAN_CTRL 0x00110031 #define ASUS_WMI_DEVID_CPU_FAN_CURVE 0x00110024 #define ASUS_WMI_DEVID_GPU_FAN_CURVE 0x00110025 +#define ASUS_WMI_DEVID_MID_FAN_CURVE 0x00110032 + +/* Tunables for AUS ROG laptops */ +#define ASUS_WMI_DEVID_PPT_PL2_SPPT 0x001200A0 +#define ASUS_WMI_DEVID_PPT_PL1_SPL 0x001200A3 +#define ASUS_WMI_DEVID_PPT_APU_SPPT 0x001200B0 +#define ASUS_WMI_DEVID_PPT_PLAT_SPPT 0x001200B1 +#define ASUS_WMI_DEVID_PPT_PL3_FPPT 0x001200C1 +#define ASUS_WMI_DEVID_NV_DYN_BOOST 0x001200C0 +#define ASUS_WMI_DEVID_NV_THERM_TARGET 0x001200C2 /* Power */ #define ASUS_WMI_DEVID_PROCESSOR_STATE 0x00120012 @@ -95,21 +123,39 @@ /* Keyboard dock */ #define ASUS_WMI_DEVID_KBD_DOCK 0x00120063 -/* dgpu on/off */ +/* Charging mode - 1=Barrel, 2=USB */ +#define ASUS_WMI_DEVID_CHARGE_MODE 0x0012006C + +/* MCU powersave mode */ +#define ASUS_WMI_DEVID_MCU_POWERSAVE 0x001200E2 + +/* epu is connected? 1 == true */ +#define ASUS_WMI_DEVID_EGPU_CONNECTED 0x00090018 +/* egpu on/off */ #define ASUS_WMI_DEVID_EGPU 0x00090019 /* dgpu on/off */ #define ASUS_WMI_DEVID_DGPU 0x00090020 +#define ASUS_WMI_DEVID_APU_MEM 0x000600C1 + +#define ASUS_WMI_DEVID_DGPU_BASE_TGP 0x00120099 +#define ASUS_WMI_DEVID_DGPU_SET_TGP 0x00120098 + /* gpu mux switch, 0 = dGPU, 1 = Optimus */ #define ASUS_WMI_DEVID_GPU_MUX 0x00090016 +#define ASUS_WMI_DEVID_GPU_MUX_VIVO 0x00090026 /* TUF laptop RGB modes/colours */ #define ASUS_WMI_DEVID_TUF_RGB_MODE 0x00100056 +#define ASUS_WMI_DEVID_TUF_RGB_MODE2 0x0010005A /* TUF laptop RGB power/state */ #define ASUS_WMI_DEVID_TUF_RGB_STATE 0x00100057 +/* Bootup sound control */ +#define ASUS_WMI_DEVID_BOOT_SOUND 0x00130022 + /* DSTS masks */ #define ASUS_WMI_DSTS_STATUS_BIT 0x00000001 #define ASUS_WMI_DSTS_UNKNOWN_BIT 0x00000002 @@ -120,9 +166,33 @@ #define ASUS_WMI_DSTS_MAX_BRIGTH_MASK 0x0000FF00 #define ASUS_WMI_DSTS_LIGHTBAR_MASK 0x0000000F +enum asus_ally_mcu_hack { + ASUS_WMI_ALLY_MCU_HACK_INIT, + ASUS_WMI_ALLY_MCU_HACK_ENABLED, + ASUS_WMI_ALLY_MCU_HACK_DISABLED, +}; + #if IS_REACHABLE(CONFIG_ASUS_WMI) +void set_ally_mcu_hack(enum asus_ally_mcu_hack status); +void set_ally_mcu_powersave(bool enabled); +int asus_wmi_get_devstate_dsts(u32 dev_id, u32 *retval); +int asus_wmi_set_devstate(u32 dev_id, u32 ctrl_param, u32 *retval); int asus_wmi_evaluate_method(u32 method_id, u32 arg0, u32 arg1, u32 *retval); #else +static inline void set_ally_mcu_hack(enum asus_ally_mcu_hack status) +{ +} +static inline void set_ally_mcu_powersave(bool enabled) +{ +} +static inline int asus_wmi_set_devstate(u32 dev_id, u32 ctrl_param, u32 *retval) +{ + return -ENODEV; +} +static inline int asus_wmi_get_devstate_dsts(u32 dev_id, u32 *retval) +{ + return -ENODEV; +} static inline int asus_wmi_evaluate_method(u32 method_id, u32 arg0, u32 arg1, u32 *retval) { diff --git a/include/linux/platform_data/x86/clk-lpss.h b/include/linux/platform_data/x86/clk-lpss.h index 41df326583f9..7f132029316a 100644 --- a/include/linux/platform_data/x86/clk-lpss.h +++ b/include/linux/platform_data/x86/clk-lpss.h @@ -15,6 +15,6 @@ struct lpss_clk_data { struct clk *clk; }; -extern int lpss_atom_clk_init(void); +int lpss_atom_clk_init(void); #endif /* __CLK_LPSS_H */ diff --git a/include/linux/platform_data/x86/int3472.h b/include/linux/platform_data/x86/int3472.h new file mode 100644 index 000000000000..b1b837583d54 --- /dev/null +++ b/include/linux/platform_data/x86/int3472.h @@ -0,0 +1,166 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Intel INT3472 ACPI camera sensor power-management support + * + * Author: Dan Scally <djrscally@gmail.com> + */ + +#ifndef __PLATFORM_DATA_X86_INT3472_H +#define __PLATFORM_DATA_X86_INT3472_H + +#include <linux/clk-provider.h> +#include <linux/gpio/machine.h> +#include <linux/leds.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/types.h> + +/* FIXME drop this once the I2C_DEV_NAME_FORMAT macro has been added to include/linux/i2c.h */ +#ifndef I2C_DEV_NAME_FORMAT +#define I2C_DEV_NAME_FORMAT "i2c-%s" +#endif + +/* PMIC GPIO Types */ +#define INT3472_GPIO_TYPE_RESET 0x00 +#define INT3472_GPIO_TYPE_POWERDOWN 0x01 +#define INT3472_GPIO_TYPE_POWER_ENABLE 0x0b +#define INT3472_GPIO_TYPE_CLK_ENABLE 0x0c +#define INT3472_GPIO_TYPE_PRIVACY_LED 0x0d +#define INT3472_GPIO_TYPE_HANDSHAKE 0x12 +#define INT3472_GPIO_TYPE_HOTPLUG_DETECT 0x13 + +#define INT3472_PDEV_MAX_NAME_LEN 23 +#define INT3472_MAX_SENSOR_GPIOS 3 +#define INT3472_MAX_REGULATORS 3 + +/* E.g. "avdd\0" */ +#define GPIO_SUPPLY_NAME_LENGTH 5 +/* 12 chars for acpi_dev_name() + "-", e.g. "ABCD1234:00-" */ +#define GPIO_REGULATOR_NAME_LENGTH (12 + GPIO_SUPPLY_NAME_LENGTH) +/* lower- and upper-case mapping */ +#define GPIO_REGULATOR_SUPPLY_MAP_COUNT 2 +/* + * Ensure the GPIO is driven low/high for at least 2 ms before changing. + * + * 2 ms has been chosen because it is the minimum time ovXXXX sensors need to + * have their reset line driven logical high to properly register a reset. + */ +#define GPIO_REGULATOR_ENABLE_TIME (2 * USEC_PER_MSEC) +#define GPIO_REGULATOR_OFF_ON_DELAY (2 * USEC_PER_MSEC) + +#define INT3472_LED_MAX_NAME_LEN 32 + +#define CIO2_SENSOR_SSDB_MCLKSPEED_OFFSET 86 + +#define INT3472_REGULATOR(_name, _ops, _enable_time, _off_on_delay) \ + (const struct regulator_desc) { \ + .name = _name, \ + .type = REGULATOR_VOLTAGE, \ + .ops = _ops, \ + .owner = THIS_MODULE, \ + .enable_time = _enable_time, \ + .off_on_delay = _off_on_delay, \ + } + +#define to_int3472_clk(hw) \ + container_of(hw, struct int3472_clock, clk_hw) + +#define to_int3472_device(clk) \ + container_of(clk, struct int3472_discrete_device, clock) + +struct acpi_device; +struct dmi_system_id; +struct i2c_client; +struct platform_device; + +struct int3472_cldb { + u8 version; + /* + * control logic type + * 0: UNKNOWN + * 1: DISCRETE(CRD-D) + * 2: PMIC TPS68470 + * 3: PMIC uP6641 + */ + u8 control_logic_type; + u8 control_logic_id; + u8 sensor_card_sku; + u8 reserved[10]; + u8 clock_source; + u8 reserved2[17]; +}; + +struct int3472_discrete_quirks { + /* For models where AVDD GPIO is shared between sensors */ + const char *avdd_second_sensor; +}; + +struct int3472_gpio_regulator { + /* SUPPLY_MAP_COUNT * 2 to make room for second sensor mappings */ + struct regulator_consumer_supply supply_map[GPIO_REGULATOR_SUPPLY_MAP_COUNT * 2]; + char supply_name_upper[GPIO_SUPPLY_NAME_LENGTH]; + char regulator_name[GPIO_REGULATOR_NAME_LENGTH]; + struct regulator_dev *rdev; + struct regulator_desc rdesc; +}; + +struct int3472_discrete_device { + struct acpi_device *adev; + struct device *dev; + struct acpi_device *sensor; + const char *sensor_name; + + struct int3472_gpio_regulator regulators[INT3472_MAX_REGULATORS]; + + struct int3472_clock { + struct clk *clk; + struct clk_hw clk_hw; + struct clk_lookup *cl; + struct gpio_desc *ena_gpio; + u32 frequency; + u8 imgclk_index; + } clock; + + struct int3472_pled { + struct led_classdev classdev; + struct led_lookup_data lookup; + char name[INT3472_LED_MAX_NAME_LEN]; + struct gpio_desc *gpio; + } pled; + + struct int3472_discrete_quirks quirks; + + unsigned int ngpios; /* how many GPIOs have we seen */ + unsigned int n_sensor_gpios; /* how many have we mapped to sensor */ + unsigned int n_regulator_gpios; /* how many have we mapped to a regulator */ + struct gpiod_lookup_table gpios; +}; + +extern const struct dmi_system_id skl_int3472_discrete_quirks[]; + +union acpi_object *skl_int3472_get_acpi_buffer(struct acpi_device *adev, + char *id); +int skl_int3472_fill_cldb(struct acpi_device *adev, struct int3472_cldb *cldb); +int skl_int3472_get_sensor_adev_and_name(struct device *dev, + struct acpi_device **sensor_adev_ret, + const char **name_ret); + +int int3472_discrete_parse_crs(struct int3472_discrete_device *int3472); +void int3472_discrete_cleanup(struct int3472_discrete_device *int3472); + +int skl_int3472_register_gpio_clock(struct int3472_discrete_device *int3472, + struct gpio_desc *gpio); +int skl_int3472_register_dsm_clock(struct int3472_discrete_device *int3472); +void skl_int3472_unregister_clock(struct int3472_discrete_device *int3472); + +int skl_int3472_register_regulator(struct int3472_discrete_device *int3472, + struct gpio_desc *gpio, + unsigned int enable_time, + const char *supply_name, + const char *second_sensor); +void skl_int3472_unregister_regulator(struct int3472_discrete_device *int3472); + +int skl_int3472_register_pled(struct int3472_discrete_device *int3472, struct gpio_desc *gpio); +void skl_int3472_unregister_pled(struct int3472_discrete_device *int3472); + +#endif diff --git a/include/linux/platform_data/intel-mid_wdt.h b/include/linux/platform_data/x86/intel-mid_wdt.h index 8dba70b4b020..e5c0210d0fec 100644 --- a/include/linux/platform_data/intel-mid_wdt.h +++ b/include/linux/platform_data/x86/intel-mid_wdt.h @@ -6,8 +6,8 @@ * Contact: David Cohen <david.a.cohen@linux.intel.com> */ -#ifndef __INTEL_MID_WDT_H__ -#define __INTEL_MID_WDT_H__ +#ifndef __PLATFORM_X86_INTEL_MID_WDT_H_ +#define __PLATFORM_X86_INTEL_MID_WDT_H_ #include <linux/platform_device.h> @@ -16,4 +16,4 @@ struct intel_mid_wdt_pdata { int (*probe)(struct platform_device *pdev); }; -#endif /*__INTEL_MID_WDT_H__*/ +#endif /* __PLATFORM_X86_INTEL_MID_WDT_H_ */ diff --git a/include/linux/platform_data/x86/intel_pmc_ipc.h b/include/linux/platform_data/x86/intel_pmc_ipc.h new file mode 100644 index 000000000000..85ea381e4a27 --- /dev/null +++ b/include/linux/platform_data/x86/intel_pmc_ipc.h @@ -0,0 +1,98 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Intel Core SoC Power Management Controller Header File + * + * Copyright (c) 2025, Intel Corporation. + * All Rights Reserved. + * + */ +#ifndef INTEL_PMC_IPC_H +#define INTEL_PMC_IPC_H +#include <linux/acpi.h> +#include <linux/cleanup.h> + +#define IPC_SOC_REGISTER_ACCESS 0xAA +#define IPC_SOC_SUB_CMD_READ 0x00 +#define IPC_SOC_SUB_CMD_WRITE 0x01 +#define PMC_IPCS_PARAM_COUNT 7 +#define VALID_IPC_RESPONSE 5 + +struct pmc_ipc_cmd { + u32 cmd; + u32 sub_cmd; + u32 size; + u32 wbuf[4]; +}; + +struct pmc_ipc_rbuf { + u32 buf[4]; +}; + +/** + * intel_pmc_ipc() - PMC IPC Mailbox accessor + * @ipc_cmd: Prepared input command to send + * @rbuf: Allocated array for returned IPC data + * + * Return: 0 on success. Non-zero on mailbox error + */ +static inline int intel_pmc_ipc(struct pmc_ipc_cmd *ipc_cmd, struct pmc_ipc_rbuf *rbuf) +{ +#ifdef CONFIG_ACPI + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object params[PMC_IPCS_PARAM_COUNT] = { + {.type = ACPI_TYPE_INTEGER,}, + {.type = ACPI_TYPE_INTEGER,}, + {.type = ACPI_TYPE_INTEGER,}, + {.type = ACPI_TYPE_INTEGER,}, + {.type = ACPI_TYPE_INTEGER,}, + {.type = ACPI_TYPE_INTEGER,}, + {.type = ACPI_TYPE_INTEGER,}, + }; + struct acpi_object_list arg_list = { PMC_IPCS_PARAM_COUNT, params }; + int status; + + if (!ipc_cmd || !rbuf) + return -EINVAL; + + /* + * 0: IPC Command + * 1: IPC Sub Command + * 2: Size + * 3-6: Write Buffer for offset + */ + params[0].integer.value = ipc_cmd->cmd; + params[1].integer.value = ipc_cmd->sub_cmd; + params[2].integer.value = ipc_cmd->size; + params[3].integer.value = ipc_cmd->wbuf[0]; + params[4].integer.value = ipc_cmd->wbuf[1]; + params[5].integer.value = ipc_cmd->wbuf[2]; + params[6].integer.value = ipc_cmd->wbuf[3]; + + status = acpi_evaluate_object(NULL, "\\IPCS", &arg_list, &buffer); + if (ACPI_FAILURE(status)) + return -ENODEV; + + union acpi_object *obj __free(kfree) = buffer.pointer; + + if (obj && obj->type == ACPI_TYPE_PACKAGE && + obj->package.count == VALID_IPC_RESPONSE) { + const union acpi_object *objs = obj->package.elements; + + if ((u8)objs[0].integer.value != 0) + return -EINVAL; + + rbuf->buf[0] = objs[1].integer.value; + rbuf->buf[1] = objs[2].integer.value; + rbuf->buf[2] = objs[3].integer.value; + rbuf->buf[3] = objs[4].integer.value; + } else { + return -EINVAL; + } + + return 0; +#else + return -ENODEV; +#endif /* CONFIG_ACPI */ +} + +#endif /* INTEL_PMC_IPC_H */ diff --git a/include/linux/platform_data/x86/intel_scu_ipc.h b/include/linux/platform_data/x86/intel_scu_ipc.h new file mode 100644 index 000000000000..b287627759f7 --- /dev/null +++ b/include/linux/platform_data/x86/intel_scu_ipc.h @@ -0,0 +1,72 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __PLATFORM_X86_INTEL_SCU_IPC_H_ +#define __PLATFORM_X86_INTEL_SCU_IPC_H_ + +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/types.h> + +struct device; +struct module; + +struct intel_scu_ipc_dev; + +/** + * struct intel_scu_ipc_data - Data used to configure SCU IPC + * @mem: Base address of SCU IPC MMIO registers + * @irq: The IRQ number used for SCU (optional) + */ +struct intel_scu_ipc_data { + struct resource mem; + int irq; +}; + +struct intel_scu_ipc_dev * +__intel_scu_ipc_register(struct device *parent, + const struct intel_scu_ipc_data *scu_data, + struct module *owner); + +#define intel_scu_ipc_register(parent, scu_data) \ + __intel_scu_ipc_register(parent, scu_data, THIS_MODULE) + +void intel_scu_ipc_unregister(struct intel_scu_ipc_dev *scu); + +struct intel_scu_ipc_dev * +__devm_intel_scu_ipc_register(struct device *parent, + const struct intel_scu_ipc_data *scu_data, + struct module *owner); + +#define devm_intel_scu_ipc_register(parent, scu_data) \ + __devm_intel_scu_ipc_register(parent, scu_data, THIS_MODULE) + +struct intel_scu_ipc_dev *intel_scu_ipc_dev_get(void); +void intel_scu_ipc_dev_put(struct intel_scu_ipc_dev *scu); +struct intel_scu_ipc_dev *devm_intel_scu_ipc_dev_get(struct device *dev); + +int intel_scu_ipc_dev_ioread8(struct intel_scu_ipc_dev *scu, u16 addr, + u8 *data); +int intel_scu_ipc_dev_iowrite8(struct intel_scu_ipc_dev *scu, u16 addr, + u8 data); +int intel_scu_ipc_dev_readv(struct intel_scu_ipc_dev *scu, u16 *addr, + u8 *data, size_t len); +int intel_scu_ipc_dev_writev(struct intel_scu_ipc_dev *scu, u16 *addr, + u8 *data, size_t len); + +int intel_scu_ipc_dev_update(struct intel_scu_ipc_dev *scu, u16 addr, + u8 data, u8 mask); + +int intel_scu_ipc_dev_simple_command(struct intel_scu_ipc_dev *scu, int cmd, + int sub); +int intel_scu_ipc_dev_command_with_size(struct intel_scu_ipc_dev *scu, int cmd, + int sub, const void *in, size_t inlen, + size_t size, void *out, size_t outlen); + +static inline int intel_scu_ipc_dev_command(struct intel_scu_ipc_dev *scu, int cmd, + int sub, const void *in, size_t inlen, + void *out, size_t outlen) +{ + return intel_scu_ipc_dev_command_with_size(scu, cmd, sub, in, inlen, + inlen, out, outlen); +} + +#endif diff --git a/include/linux/platform_data/x86/pmc_atom.h b/include/linux/platform_data/x86/pmc_atom.h index b8a701c77fd0..161e4bc1c9ee 100644 --- a/include/linux/platform_data/x86/pmc_atom.h +++ b/include/linux/platform_data/x86/pmc_atom.h @@ -43,6 +43,19 @@ BIT_ORED_DEDICATED_IRQ_GPSC | \ BIT_SHARED_IRQ_GPSS) +/* External clk generator settings */ +#define PMC_CLK_CTL_OFFSET 0x60 +#define PMC_CLK_CTL_SIZE 4 +#define PMC_CLK_NUM 6 +#define PMC_CLK_CTL_GATED_ON_D3 0x0 +#define PMC_CLK_CTL_FORCE_ON 0x1 +#define PMC_CLK_CTL_FORCE_OFF 0x2 +#define PMC_CLK_CTL_RESERVED 0x3 +#define PMC_MASK_CLK_CTL GENMASK(1, 0) +#define PMC_MASK_CLK_FREQ BIT(2) +#define PMC_CLK_FREQ_XTAL (0 << 2) /* 25 MHz */ +#define PMC_CLK_FREQ_PLL (1 << 2) /* 19.2 MHz */ + /* The timers accumulate time spent in sleep state */ #define PMC_S0IR_TMR 0x80 #define PMC_S0I1_TMR 0x84 @@ -104,14 +117,14 @@ #define BIT_SCC_SDIO BIT(9) #define BIT_SCC_SDCARD BIT(10) #define BIT_SCC_MIPI BIT(11) -#define BIT_HDA BIT(12) +#define BIT_HDA BIT(12) /* CHT datasheet: reserved */ #define BIT_LPE BIT(13) #define BIT_OTG BIT(14) -#define BIT_USH BIT(15) -#define BIT_GBE BIT(16) -#define BIT_SATA BIT(17) -#define BIT_USB_EHCI BIT(18) -#define BIT_SEC BIT(19) +#define BIT_USH BIT(15) /* CHT datasheet: reserved */ +#define BIT_GBE BIT(16) /* CHT datasheet: reserved */ +#define BIT_SATA BIT(17) /* CHT datasheet: reserved */ +#define BIT_USB_EHCI BIT(18) /* CHT datasheet: XHCI! */ +#define BIT_SEC BIT(19) /* BYT datasheet: reserved */ #define BIT_PCIE_PORT0 BIT(20) #define BIT_PCIE_PORT1 BIT(21) #define BIT_PCIE_PORT2 BIT(22) diff --git a/include/linux/platform_data/x86/pwm-lpss.h b/include/linux/platform_data/x86/pwm-lpss.h index c852fe24fe2a..f0349edb47f4 100644 --- a/include/linux/platform_data/x86/pwm-lpss.h +++ b/include/linux/platform_data/x86/pwm-lpss.h @@ -15,9 +15,36 @@ struct pwm_lpss_boardinfo { unsigned int npwm; unsigned long base_unit_bits; /* - * Some versions of the IP may stuck in the state machine if enable - * bit is not set, and hence update bit will show busy status till - * the reset. For the rest it may be otherwise. + * NOTE: + * Intel Broxton, Apollo Lake, and Gemini Lake have different programming flow. + * + * Initial Enable or First Activation + * 1. Program the base unit and on time divisor values. + * 2. Set the software update bit. + * 3. Poll in a loop on the PWMCTRL bit until software update bit is cleared.+ + * 4. Enable the PWM output by setting PWM Enable. + * 5. Repeat the above steps for the next PWM Module. + * + * Dynamic update while PWM is Enabled + * 1. Program the base unit and on-time divisor values. + * 2. Set the software update bit. + * 3. Repeat the above steps for the next PWM module. + * + * + After setting PWMCTRL register's SW update bit, hardware automatically + * deasserts the SW update bit after a brief delay. It was observed that + * setting of PWM enable is typically done via read-modify-write of the PWMCTRL + * register. If there is no/little delay between setting software update bit + * and setting enable bit via read-modify-write, it is possible that the read + * could return with software enable as 1. In that case, the last write to set + * enable to 1 could also set sw_update to 1. If this happens, sw_update gets + * stuck and the driver code can hang as it explicitly waits for sw_update bit + * to be 0 after setting the enable bit to 1. To avoid this race condition, + * SW should poll on the software update bit to make sure that it is 0 before + * doing the read-modify-write to set the enable bit to 1. + * + * Also, we noted that if sw_update bit was set in step #1 above then when it + * is set again in step #2, sw_update bit never gets cleared and the flow hangs. + * As such, we need to make sure that sw_update bit is 0 when doing step #1. */ bool bypass; /* @@ -27,7 +54,7 @@ struct pwm_lpss_boardinfo { bool other_devices_aml_touches_pwm_regs; }; -struct pwm_lpss_chip *devm_pwm_lpss_probe(struct device *dev, void __iomem *base, - const struct pwm_lpss_boardinfo *info); +struct pwm_chip *devm_pwm_lpss_probe(struct device *dev, void __iomem *base, + const struct pwm_lpss_boardinfo *info); #endif /* __PLATFORM_DATA_X86_PWM_LPSS_H */ diff --git a/include/linux/platform_data/x86/simatic-ipc-base.h b/include/linux/platform_data/x86/simatic-ipc-base.h index 57d6a10dfc9e..2d7f7120ba6b 100644 --- a/include/linux/platform_data/x86/simatic-ipc-base.h +++ b/include/linux/platform_data/x86/simatic-ipc-base.h @@ -2,7 +2,7 @@ /* * Siemens SIMATIC IPC drivers * - * Copyright (c) Siemens AG, 2018-2021 + * Copyright (c) Siemens AG, 2018-2023 * * Authors: * Henning Schild <henning.schild@siemens.com> @@ -20,6 +20,9 @@ #define SIMATIC_IPC_DEVICE_127E 3 #define SIMATIC_IPC_DEVICE_227E 4 #define SIMATIC_IPC_DEVICE_227G 5 +#define SIMATIC_IPC_DEVICE_BX_21A 6 +#define SIMATIC_IPC_DEVICE_BX_39A 7 +#define SIMATIC_IPC_DEVICE_BX_59A 8 struct simatic_ipc_platform { u8 devmode; diff --git a/include/linux/platform_data/x86/simatic-ipc.h b/include/linux/platform_data/x86/simatic-ipc.h index a48bb5240977..8d8b3b919674 100644 --- a/include/linux/platform_data/x86/simatic-ipc.h +++ b/include/linux/platform_data/x86/simatic-ipc.h @@ -2,7 +2,7 @@ /* * Siemens SIMATIC IPC drivers * - * Copyright (c) Siemens AG, 2018-2021 + * Copyright (c) Siemens AG, 2018-2023 * * Authors: * Henning Schild <henning.schild@siemens.com> @@ -32,8 +32,12 @@ enum simatic_ipc_station_ids { SIMATIC_IPC_IPC477E = 0x00000A02, SIMATIC_IPC_IPC127E = 0x00000D01, SIMATIC_IPC_IPC227G = 0x00000F01, + SIMATIC_IPC_IPC277G = 0x00000F02, SIMATIC_IPC_IPCBX_39A = 0x00001001, SIMATIC_IPC_IPCPX_39A = 0x00001002, + SIMATIC_IPC_IPCBX_21A = 0x00001101, + SIMATIC_IPC_IPCBX_56A = 0x00001201, + SIMATIC_IPC_IPCBX_59A = 0x00001202, }; static inline u32 simatic_ipc_get_station_id(u8 *data, int max_len) diff --git a/include/linux/platform_data/x86/soc.h b/include/linux/platform_data/x86/soc.h index da05f425587a..f981907a5cb0 100644 --- a/include/linux/platform_data/x86/soc.h +++ b/include/linux/platform_data/x86/soc.h @@ -8,16 +8,19 @@ #ifndef __PLATFORM_DATA_X86_SOC_H #define __PLATFORM_DATA_X86_SOC_H +#include <linux/types.h> + #if IS_ENABLED(CONFIG_X86) +#include <linux/mod_devicetable.h> + #include <asm/cpu_device_id.h> -#include <asm/intel-family.h> #define SOC_INTEL_IS_CPU(soc, type) \ static inline bool soc_intel_is_##soc(void) \ { \ static const struct x86_cpu_id soc##_cpu_ids[] = { \ - X86_MATCH_INTEL_FAM6_MODEL(type, NULL), \ + X86_MATCH_VFM(type, NULL), \ {} \ }; \ const struct x86_cpu_id *id; \ @@ -28,11 +31,13 @@ static inline bool soc_intel_is_##soc(void) \ return false; \ } -SOC_INTEL_IS_CPU(byt, ATOM_SILVERMONT); -SOC_INTEL_IS_CPU(cht, ATOM_AIRMONT); -SOC_INTEL_IS_CPU(apl, ATOM_GOLDMONT); -SOC_INTEL_IS_CPU(glk, ATOM_GOLDMONT_PLUS); -SOC_INTEL_IS_CPU(cml, KABYLAKE_L); +SOC_INTEL_IS_CPU(byt, INTEL_ATOM_SILVERMONT); +SOC_INTEL_IS_CPU(cht, INTEL_ATOM_AIRMONT); +SOC_INTEL_IS_CPU(apl, INTEL_ATOM_GOLDMONT); +SOC_INTEL_IS_CPU(glk, INTEL_ATOM_GOLDMONT_PLUS); +SOC_INTEL_IS_CPU(cml, INTEL_KABYLAKE_L); + +#undef SOC_INTEL_IS_CPU #else /* IS_ENABLED(CONFIG_X86) */ diff --git a/include/linux/platform_data/zforce_ts.h b/include/linux/platform_data/zforce_ts.h deleted file mode 100644 index 2463a4a856a6..000000000000 --- a/include/linux/platform_data/zforce_ts.h +++ /dev/null @@ -1,15 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* drivers/input/touchscreen/zforce.c - * - * Copyright (C) 2012-2013 MundoReader S.L. - */ - -#ifndef _LINUX_INPUT_ZFORCE_TS_H -#define _LINUX_INPUT_ZFORCE_TS_H - -struct zforce_ts_platdata { - unsigned int x_max; - unsigned int y_max; -}; - -#endif /* _LINUX_INPUT_ZFORCE_TS_H */ |