diff options
Diffstat (limited to 'include/linux/platform_data')
29 files changed, 592 insertions, 582 deletions
diff --git a/include/linux/platform_data/amd_qdma.h b/include/linux/platform_data/amd_qdma.h index 576d952f97ed..967a6ef31cf9 100644 --- a/include/linux/platform_data/amd_qdma.h +++ b/include/linux/platform_data/amd_qdma.h @@ -26,11 +26,13 @@ struct dma_slave_map; * @max_mm_channels: Maximum number of MM DMA channels in each direction * @device_map: DMA slave map * @irq_index: The index of first IRQ + * @dma_dev: The device pointer for dma operations */ struct qdma_platdata { u32 max_mm_channels; u32 irq_index; struct dma_slave_map *device_map; + struct device *dma_dev; }; #endif /* _PLATDATA_AMD_QDMA_H */ diff --git a/include/linux/platform_data/bcmgenet.h b/include/linux/platform_data/bcmgenet.h deleted file mode 100644 index d8f8738629d2..000000000000 --- a/include/linux/platform_data/bcmgenet.h +++ /dev/null @@ -1,19 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __LINUX_PLATFORM_DATA_BCMGENET_H__ -#define __LINUX_PLATFORM_DATA_BCMGENET_H__ - -#include <linux/types.h> -#include <linux/if_ether.h> -#include <linux/phy.h> - -struct bcmgenet_platform_data { - bool mdio_enabled; - phy_interface_t phy_interface; - int phy_address; - int phy_speed; - int phy_duplex; - u8 mac_address[ETH_ALEN]; - int genet_version; -}; - -#endif diff --git a/include/linux/platform_data/clk-davinci-pll.h b/include/linux/platform_data/clk-davinci-pll.h deleted file mode 100644 index e55dab1d578b..000000000000 --- a/include/linux/platform_data/clk-davinci-pll.h +++ /dev/null @@ -1,21 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * PLL clock driver for TI Davinci SoCs - * - * Copyright (C) 2018 David Lechner <david@lechnology.com> - */ - -#ifndef __LINUX_PLATFORM_DATA_CLK_DAVINCI_PLL_H__ -#define __LINUX_PLATFORM_DATA_CLK_DAVINCI_PLL_H__ - -#include <linux/regmap.h> - -/** - * davinci_pll_platform_data - * @cfgchip: CFGCHIP syscon regmap - */ -struct davinci_pll_platform_data { - struct regmap *cfgchip; -}; - -#endif /* __LINUX_PLATFORM_DATA_CLK_DAVINCI_PLL_H__ */ diff --git a/include/linux/platform_data/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h index b3c4993e656e..69294f79cc88 100644 --- a/include/linux/platform_data/cros_ec_commands.h +++ b/include/linux/platform_data/cros_ec_commands.h @@ -1825,6 +1825,16 @@ struct ec_response_pwm_get_duty { uint16_t duty; /* Duty cycle, EC_PWM_MAX_DUTY = 100% */ } __ec_align2; +#define EC_CMD_PWM_GET_FAN_DUTY 0x0027 + +struct ec_params_pwm_get_fan_duty { + uint8_t fan_idx; +} __ec_align1; + +struct ec_response_pwm_get_fan_duty { + uint32_t percent; /* Percentage of duty cycle, ranging from 0 ~ 100 */ +} __ec_align4; + /*****************************************************************************/ /* * Lightbar commands. This looks worse than it is. Since we only use one HOST @@ -2388,6 +2398,12 @@ enum motionsense_command { */ MOTIONSENSE_CMD_SENSOR_SCALE = 18, + /* + * Activity management + * Retrieve current status of given activity. + */ + MOTIONSENSE_CMD_GET_ACTIVITY = 20, + /* Number of motionsense sub-commands. */ MOTIONSENSE_NUM_CMDS }; @@ -2447,6 +2463,11 @@ enum motionsensor_orientation { MOTIONSENSE_ORIENTATION_UNKNOWN = 4, }; +struct ec_response_activity_data { + uint8_t activity; /* motionsensor_activity */ + uint8_t state; +} __ec_todo_packed; + struct ec_response_motion_sensor_data { /* Flags for each sensor. */ uint8_t flags; @@ -2460,8 +2481,7 @@ struct ec_response_motion_sensor_data { uint32_t timestamp; }; struct __ec_todo_unpacked { - uint8_t activity; /* motionsensor_activity */ - uint8_t state; + struct ec_response_activity_data activity_data; int16_t add_info[2]; }; }; @@ -2494,6 +2514,7 @@ enum motionsensor_activity { MOTIONSENSE_ACTIVITY_SIG_MOTION = 1, MOTIONSENSE_ACTIVITY_DOUBLE_TAP = 2, MOTIONSENSE_ACTIVITY_ORIENTATION = 3, + MOTIONSENSE_ACTIVITY_BODY_DETECTION = 4, }; struct ec_motion_sense_activity { @@ -2671,6 +2692,7 @@ struct ec_params_motion_sense { uint32_t max_data_vector; } fifo_read; + /* Used for MOTIONSENSE_CMD_SET_ACTIVITY */ struct ec_motion_sense_activity set_activity; /* Used for MOTIONSENSE_CMD_LID_ANGLE */ @@ -2716,6 +2738,12 @@ struct ec_params_motion_sense { */ int16_t hys_degree; } tablet_mode_threshold; + + /* Used for MOTIONSENSE_CMD_GET_ACTIVITY */ + struct __ec_todo_unpacked { + uint8_t sensor_num; + uint8_t activity; /* enum motionsensor_activity */ + } get_activity; }; } __ec_todo_packed; @@ -2833,6 +2861,10 @@ struct ec_response_motion_sense { uint16_t hys_degree; } tablet_mode_threshold; + /* USED for MOTIONSENSE_CMD_GET_ACTIVITY. */ + struct __ec_todo_unpacked { + uint8_t state; + } get_activity; }; } __ec_todo_packed; @@ -3105,14 +3137,31 @@ struct ec_params_thermal_set_threshold_v1 { /****************************************************************************/ -/* Toggle automatic fan control */ +/* Set or get fan control mode */ #define EC_CMD_THERMAL_AUTO_FAN_CTRL 0x0052 +enum ec_auto_fan_ctrl_cmd { + EC_AUTO_FAN_CONTROL_CMD_SET = 0, + EC_AUTO_FAN_CONTROL_CMD_GET, +}; + /* Version 1 of input params */ struct ec_params_auto_fan_ctrl_v1 { uint8_t fan_idx; } __ec_align1; +/* Version 2 of input params */ +struct ec_params_auto_fan_ctrl_v2 { + uint8_t fan_idx; + uint8_t cmd; /* enum ec_auto_fan_ctrl_cmd */ + uint8_t set_auto; /* only used with EC_AUTO_FAN_CONTROL_CMD_SET - bool + */ +} __ec_align4; + +struct ec_response_auto_fan_control { + uint8_t is_auto; /* bool */ +} __ec_align1; + /* Get/Set TMP006 calibration data */ #define EC_CMD_TMP006_GET_CALIBRATION 0x0053 #define EC_CMD_TMP006_SET_CALIBRATION 0x0054 @@ -5044,8 +5093,12 @@ struct ec_response_pd_status { #define PD_EVENT_POWER_CHANGE BIT(1) #define PD_EVENT_IDENTITY_RECEIVED BIT(2) #define PD_EVENT_DATA_SWAP BIT(3) +#define PD_EVENT_TYPEC BIT(4) +#define PD_EVENT_PPM BIT(5) +#define PD_EVENT_INIT BIT(6) + struct ec_response_host_event_status { - uint32_t status; /* PD MCU host event status */ + uint32_t status; /* PD MCU host event status */ } __ec_align4; /* Set USB type-C port role and muxes */ @@ -6105,6 +6158,29 @@ struct ec_response_typec_vdm_response { #undef VDO_MAX_SIZE +/* + * UCSI OPM-PPM commands + * + * These commands are used for communication between OPM and PPM. + * Only UCSI3.0 is tested. + */ + +#define EC_CMD_UCSI_PPM_SET 0x0140 + +/* The data size is stored in the host command protocol header. */ +struct ec_params_ucsi_ppm_set { + uint16_t offset; + uint8_t data[]; +} __ec_align2; + +#define EC_CMD_UCSI_PPM_GET 0x0141 + +/* For 'GET' sub-commands, data will be returned as a raw payload. */ +struct ec_params_ucsi_ppm_get { + uint16_t offset; + uint8_t size; +} __ec_align2; + /*****************************************************************************/ /* The command range 0x200-0x2FF is reserved for Rotor. */ diff --git a/include/linux/platform_data/cros_ec_proto.h b/include/linux/platform_data/cros_ec_proto.h index b34ed0cc1f8d..de14923720a5 100644 --- a/include/linux/platform_data/cros_ec_proto.h +++ b/include/linux/platform_data/cros_ec_proto.h @@ -33,15 +33,26 @@ /* * Max bus-specific overhead incurred by request/responses. - * I2C requires 1 additional byte for requests. - * I2C requires 2 additional bytes for responses. - * SPI requires up to 32 additional bytes for responses. + * + * Request: + * - I2C requires 1 byte (see struct ec_host_request_i2c). + * - ISHTP requires 4 bytes (see struct cros_ish_out_msg). + * + * Response: + * - I2C requires 2 bytes (see struct ec_host_response_i2c). + * - ISHTP requires 4 bytes (see struct cros_ish_in_msg). + * - SPI requires 32 bytes (see EC_MSG_PREAMBLE_COUNT). */ #define EC_PROTO_VERSION_UNKNOWN 0 -#define EC_MAX_REQUEST_OVERHEAD 1 +#define EC_MAX_REQUEST_OVERHEAD 4 #define EC_MAX_RESPONSE_OVERHEAD 32 /* + * ACPI notify value for MKBP host event. + */ +#define ACPI_NOTIFY_CROS_EC_MKBP 0x80 + +/* * EC panic is not covered by the standard (0-F) ACPI notify values. * Arbitrarily choosing B0 to notify ec panic, which is in the 84-BF * device specific ACPI notify range. @@ -117,6 +128,7 @@ struct cros_ec_command { * @dout_size: Size of dout buffer to allocate (zero to use static dout). * @wake_enabled: True if this device can wake the system from sleep. * @suspended: True if this device had been suspended. + * @registered: True if this device had been registered. * @cmd_xfer: Send command to EC and get response. * Returns the number of bytes received if the communication * succeeded, but that doesn't mean the EC was happy with the @@ -175,6 +187,7 @@ struct cros_ec_device { int dout_size; bool wake_enabled; bool suspended; + bool registered; int (*cmd_xfer)(struct cros_ec_device *ec, struct cros_ec_command *msg); int (*pkt_xfer)(struct cros_ec_device *ec, @@ -246,6 +259,8 @@ int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev, int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev, struct cros_ec_command *msg); +int cros_ec_rwsig_continue(struct cros_ec_device *ec_dev); + int cros_ec_query_all(struct cros_ec_device *ec_dev); int cros_ec_get_next_event(struct cros_ec_device *ec_dev, @@ -265,6 +280,8 @@ int cros_ec_cmd_readmem(struct cros_ec_device *ec_dev, u8 offset, u8 size, void int cros_ec_get_cmd_versions(struct cros_ec_device *ec_dev, u16 cmd); +bool cros_ec_device_registered(struct cros_ec_device *ec_dev); + /** * cros_ec_get_time_ns() - Return time in ns. * diff --git a/include/linux/platform_data/dmtimer-omap.h b/include/linux/platform_data/dmtimer-omap.h index 95d852aef130..726d89143842 100644 --- a/include/linux/platform_data/dmtimer-omap.h +++ b/include/linux/platform_data/dmtimer-omap.h @@ -36,9 +36,13 @@ struct omap_dm_timer_ops { int (*set_pwm)(struct omap_dm_timer *timer, int def_on, int toggle, int trigger, int autoreload); int (*get_pwm_status)(struct omap_dm_timer *timer); + int (*set_cap)(struct omap_dm_timer *timer, + int autoreload, bool config_period); + int (*get_cap_status)(struct omap_dm_timer *timer); int (*set_prescaler)(struct omap_dm_timer *timer, int prescaler); unsigned int (*read_counter)(struct omap_dm_timer *timer); + unsigned int (*read_cap)(struct omap_dm_timer *timer, bool is_period); int (*write_counter)(struct omap_dm_timer *timer, unsigned int value); unsigned int (*read_status)(struct omap_dm_timer *timer); diff --git a/include/linux/platform_data/emc2305.h b/include/linux/platform_data/emc2305.h index 54d672dd6f7d..76043a97f975 100644 --- a/include/linux/platform_data/emc2305.h +++ b/include/linux/platform_data/emc2305.h @@ -9,14 +9,20 @@ * struct emc2305_platform_data - EMC2305 driver platform data * @max_state: maximum cooling state of the cooling device; * @pwm_num: number of active channels; + * @pwm_output_mask: PWM output mask + * @pwm_polarity_mask: PWM polarity mask * @pwm_separate: separate PWM settings for every channel; * @pwm_min: array of minimum PWM per channel; + * @pwm_freq: array of PWM frequency per channel */ struct emc2305_platform_data { u8 max_state; u8 pwm_num; + u8 pwm_output_mask; + u8 pwm_polarity_mask; bool pwm_separate; u8 pwm_min[EMC2305_PWM_MAX]; + u16 pwm_freq[EMC2305_PWM_MAX]; }; #endif diff --git a/include/linux/platform_data/huawei-gaokun-ec.h b/include/linux/platform_data/huawei-gaokun-ec.h new file mode 100644 index 000000000000..faa15d315128 --- /dev/null +++ b/include/linux/platform_data/huawei-gaokun-ec.h @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Huawei Matebook E Go Embedded Controller + * + * Copyright (C) 2024-2025 Pengyu Luo <mitltlatltl@gmail.com> + */ + +#ifndef __HUAWEI_GAOKUN_EC_H__ +#define __HUAWEI_GAOKUN_EC_H__ + +#define GAOKUN_UCSI_CCI_SIZE 4 +#define GAOKUN_UCSI_MSGI_SIZE 16 +#define GAOKUN_UCSI_READ_SIZE (GAOKUN_UCSI_CCI_SIZE + GAOKUN_UCSI_MSGI_SIZE) +#define GAOKUN_UCSI_WRITE_SIZE 24 /* 8B CTRL, 16B MSGO */ + +#define GAOKUN_UCSI_NO_PORT_UPDATE (-1) + +#define GAOKUN_SMART_CHARGE_DATA_SIZE 4 /* mode, delay, start, end */ + +/* -------------------------------------------------------------------------- */ + +struct gaokun_ec; +struct gaokun_ucsi_reg; +struct notifier_block; + +#define GAOKUN_MOD_NAME "huawei_gaokun_ec" +#define GAOKUN_DEV_PSY "psy" +#define GAOKUN_DEV_UCSI "ucsi" + +/* -------------------------------------------------------------------------- */ +/* Common API */ + +int gaokun_ec_register_notify(struct gaokun_ec *ec, + struct notifier_block *nb); +void gaokun_ec_unregister_notify(struct gaokun_ec *ec, + struct notifier_block *nb); + +int gaokun_ec_read(struct gaokun_ec *ec, const u8 *req, + size_t resp_len, u8 *resp); +int gaokun_ec_write(struct gaokun_ec *ec, const u8 *req); +int gaokun_ec_read_byte(struct gaokun_ec *ec, const u8 *req, u8 *byte); + +/* -------------------------------------------------------------------------- */ +/* API for PSY */ + +int gaokun_ec_psy_multi_read(struct gaokun_ec *ec, u8 reg, + size_t resp_len, u8 *resp); + +static inline int gaokun_ec_psy_read_byte(struct gaokun_ec *ec, + u8 reg, u8 *byte) +{ + return gaokun_ec_psy_multi_read(ec, reg, sizeof(*byte), byte); +} + +static inline int gaokun_ec_psy_read_word(struct gaokun_ec *ec, + u8 reg, u16 *word) +{ + return gaokun_ec_psy_multi_read(ec, reg, sizeof(*word), (u8 *)word); +} + +int gaokun_ec_psy_get_smart_charge(struct gaokun_ec *ec, + u8 resp[GAOKUN_SMART_CHARGE_DATA_SIZE]); +int gaokun_ec_psy_set_smart_charge(struct gaokun_ec *ec, + const u8 req[GAOKUN_SMART_CHARGE_DATA_SIZE]); + +int gaokun_ec_psy_get_smart_charge_enable(struct gaokun_ec *ec, bool *on); +int gaokun_ec_psy_set_smart_charge_enable(struct gaokun_ec *ec, bool on); + +/* -------------------------------------------------------------------------- */ +/* API for UCSI */ + +int gaokun_ec_ucsi_read(struct gaokun_ec *ec, u8 resp[GAOKUN_UCSI_READ_SIZE]); +int gaokun_ec_ucsi_write(struct gaokun_ec *ec, + const u8 req[GAOKUN_UCSI_WRITE_SIZE]); + +int gaokun_ec_ucsi_get_reg(struct gaokun_ec *ec, struct gaokun_ucsi_reg *ureg); +int gaokun_ec_ucsi_pan_ack(struct gaokun_ec *ec, int port_id); + +#endif /* __HUAWEI_GAOKUN_EC_H__ */ diff --git a/include/linux/platform_data/i2c-davinci.h b/include/linux/platform_data/i2c-davinci.h deleted file mode 100644 index 98967df07468..000000000000 --- a/include/linux/platform_data/i2c-davinci.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * DaVinci I2C controller platform_device info - * - * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com> - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. -*/ - -#ifndef __ASM_ARCH_I2C_H -#define __ASM_ARCH_I2C_H - -/* All frequencies are expressed in kHz */ -struct davinci_i2c_platform_data { - unsigned int bus_freq; /* standard bus frequency (kHz) */ - unsigned int bus_delay; /* post-transaction delay (usec) */ - bool gpio_recovery; /* Use GPIO recovery method */ - bool has_pfunc; /* Chip has a ICPFUNC register */ -}; - -/* for board setup code */ -void davinci_init_i2c(struct davinci_i2c_platform_data *); - -#endif /* __ASM_ARCH_I2C_H */ diff --git a/include/linux/platform_data/keyboard-spear.h b/include/linux/platform_data/keyboard-spear.h deleted file mode 100644 index 5e3ff653900c..000000000000 --- a/include/linux/platform_data/keyboard-spear.h +++ /dev/null @@ -1,164 +0,0 @@ -/* - * Copyright (C) 2010 ST Microelectronics - * Rajeev Kumar <rajeevkumar.linux@gmail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __PLAT_KEYBOARD_H -#define __PLAT_KEYBOARD_H - -#include <linux/bitops.h> -#include <linux/input.h> -#include <linux/input/matrix_keypad.h> -#include <linux/types.h> - -#define DECLARE_9x9_KEYMAP(_name) \ -int _name[] = { \ - KEY(0, 0, KEY_ESC), \ - KEY(0, 1, KEY_1), \ - KEY(0, 2, KEY_2), \ - KEY(0, 3, KEY_3), \ - KEY(0, 4, KEY_4), \ - KEY(0, 5, KEY_5), \ - KEY(0, 6, KEY_6), \ - KEY(0, 7, KEY_7), \ - KEY(0, 8, KEY_8), \ - KEY(1, 0, KEY_9), \ - KEY(1, 1, KEY_MINUS), \ - KEY(1, 2, KEY_EQUAL), \ - KEY(1, 3, KEY_BACKSPACE), \ - KEY(1, 4, KEY_TAB), \ - KEY(1, 5, KEY_Q), \ - KEY(1, 6, KEY_W), \ - KEY(1, 7, KEY_E), \ - KEY(1, 8, KEY_R), \ - KEY(2, 0, KEY_T), \ - KEY(2, 1, KEY_Y), \ - KEY(2, 2, KEY_U), \ - KEY(2, 3, KEY_I), \ - KEY(2, 4, KEY_O), \ - KEY(2, 5, KEY_P), \ - KEY(2, 6, KEY_LEFTBRACE), \ - KEY(2, 7, KEY_RIGHTBRACE), \ - KEY(2, 8, KEY_ENTER), \ - KEY(3, 0, KEY_LEFTCTRL), \ - KEY(3, 1, KEY_A), \ - KEY(3, 2, KEY_S), \ - KEY(3, 3, KEY_D), \ - KEY(3, 4, KEY_F), \ - KEY(3, 5, KEY_G), \ - KEY(3, 6, KEY_H), \ - KEY(3, 7, KEY_J), \ - KEY(3, 8, KEY_K), \ - KEY(4, 0, KEY_L), \ - KEY(4, 1, KEY_SEMICOLON), \ - KEY(4, 2, KEY_APOSTROPHE), \ - KEY(4, 3, KEY_GRAVE), \ - KEY(4, 4, KEY_LEFTSHIFT), \ - KEY(4, 5, KEY_BACKSLASH), \ - KEY(4, 6, KEY_Z), \ - KEY(4, 7, KEY_X), \ - KEY(4, 8, KEY_C), \ - KEY(5, 0, KEY_V), \ - KEY(5, 1, KEY_B), \ - KEY(5, 2, KEY_N), \ - KEY(5, 3, KEY_M), \ - KEY(5, 4, KEY_COMMA), \ - KEY(5, 5, KEY_DOT), \ - KEY(5, 6, KEY_SLASH), \ - KEY(5, 7, KEY_RIGHTSHIFT), \ - KEY(5, 8, KEY_KPASTERISK), \ - KEY(6, 0, KEY_LEFTALT), \ - KEY(6, 1, KEY_SPACE), \ - KEY(6, 2, KEY_CAPSLOCK), \ - KEY(6, 3, KEY_F1), \ - KEY(6, 4, KEY_F2), \ - KEY(6, 5, KEY_F3), \ - KEY(6, 6, KEY_F4), \ - KEY(6, 7, KEY_F5), \ - KEY(6, 8, KEY_F6), \ - KEY(7, 0, KEY_F7), \ - KEY(7, 1, KEY_F8), \ - KEY(7, 2, KEY_F9), \ - KEY(7, 3, KEY_F10), \ - KEY(7, 4, KEY_NUMLOCK), \ - KEY(7, 5, KEY_SCROLLLOCK), \ - KEY(7, 6, KEY_KP7), \ - KEY(7, 7, KEY_KP8), \ - KEY(7, 8, KEY_KP9), \ - KEY(8, 0, KEY_KPMINUS), \ - KEY(8, 1, KEY_KP4), \ - KEY(8, 2, KEY_KP5), \ - KEY(8, 3, KEY_KP6), \ - KEY(8, 4, KEY_KPPLUS), \ - KEY(8, 5, KEY_KP1), \ - KEY(8, 6, KEY_KP2), \ - KEY(8, 7, KEY_KP3), \ - KEY(8, 8, KEY_KP0), \ -} - -#define DECLARE_6x6_KEYMAP(_name) \ -int _name[] = { \ - KEY(0, 0, KEY_RESERVED), \ - KEY(0, 1, KEY_1), \ - KEY(0, 2, KEY_2), \ - KEY(0, 3, KEY_3), \ - KEY(0, 4, KEY_4), \ - KEY(0, 5, KEY_5), \ - KEY(1, 0, KEY_Q), \ - KEY(1, 1, KEY_W), \ - KEY(1, 2, KEY_E), \ - KEY(1, 3, KEY_R), \ - KEY(1, 4, KEY_T), \ - KEY(1, 5, KEY_Y), \ - KEY(2, 0, KEY_D), \ - KEY(2, 1, KEY_F), \ - KEY(2, 2, KEY_G), \ - KEY(2, 3, KEY_H), \ - KEY(2, 4, KEY_J), \ - KEY(2, 5, KEY_K), \ - KEY(3, 0, KEY_B), \ - KEY(3, 1, KEY_N), \ - KEY(3, 2, KEY_M), \ - KEY(3, 3, KEY_COMMA), \ - KEY(3, 4, KEY_DOT), \ - KEY(3, 5, KEY_SLASH), \ - KEY(4, 0, KEY_F6), \ - KEY(4, 1, KEY_F7), \ - KEY(4, 2, KEY_F8), \ - KEY(4, 3, KEY_F9), \ - KEY(4, 4, KEY_F10), \ - KEY(4, 5, KEY_NUMLOCK), \ - KEY(5, 0, KEY_KP2), \ - KEY(5, 1, KEY_KP3), \ - KEY(5, 2, KEY_KP0), \ - KEY(5, 3, KEY_KPDOT), \ - KEY(5, 4, KEY_RO), \ - KEY(5, 5, KEY_ZENKAKUHANKAKU), \ -} - -#define KEYPAD_9x9 0 -#define KEYPAD_6x6 1 -#define KEYPAD_2x2 2 - -/** - * struct kbd_platform_data - spear keyboard platform data - * keymap: pointer to keymap data (table and size) - * rep: enables key autorepeat - * mode: choose keyboard support(9x9, 6x6, 2x2) - * suspended_rate: rate at which keyboard would operate in suspended mode - * - * This structure is supposed to be used by platform code to supply - * keymaps to drivers that implement keyboards. - */ -struct kbd_platform_data { - const struct matrix_keymap_data *keymap; - bool rep; - unsigned int mode; - unsigned int suspended_rate; -}; - -#endif /* __PLAT_KEYBOARD_H */ diff --git a/include/linux/platform_data/keypad-pxa27x.h b/include/linux/platform_data/keypad-pxa27x.h deleted file mode 100644 index a376442b9935..000000000000 --- a/include/linux/platform_data/keypad-pxa27x.h +++ /dev/null @@ -1,73 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_ARCH_PXA27x_KEYPAD_H -#define __ASM_ARCH_PXA27x_KEYPAD_H - -#include <linux/input.h> -#include <linux/input/matrix_keypad.h> - -#define MAX_MATRIX_KEY_ROWS (8) -#define MAX_MATRIX_KEY_COLS (8) -#define MATRIX_ROW_SHIFT (3) -#define MAX_DIRECT_KEY_NUM (8) - -/* pxa3xx keypad platform specific parameters - * - * NOTE: - * 1. direct_key_num indicates the number of keys in the direct keypad - * _plus_ the number of rotary-encoder sensor inputs, this can be - * left as 0 if only rotary encoders are enabled, the driver will - * automatically calculate this - * - * 2. direct_key_map is the key code map for the direct keys, if rotary - * encoder(s) are enabled, direct key 0/1(2/3) will be ignored - * - * 3. rotary can be either interpreted as a relative input event (e.g. - * REL_WHEEL/REL_HWHEEL) or specific keys (e.g. UP/DOWN/LEFT/RIGHT) - * - * 4. matrix key and direct key will use the same debounce_interval by - * default, which should be sufficient in most cases - * - * pxa168 keypad platform specific parameter - * - * NOTE: - * clear_wakeup_event callback is a workaround required to clear the - * keypad interrupt. The keypad wake must be cleared in addition to - * reading the MI/DI bits in the KPC register. - */ -struct pxa27x_keypad_platform_data { - - /* code map for the matrix keys */ - const struct matrix_keymap_data *matrix_keymap_data; - unsigned int matrix_key_rows; - unsigned int matrix_key_cols; - - /* direct keys */ - int direct_key_num; - unsigned int direct_key_map[MAX_DIRECT_KEY_NUM]; - /* the key output may be low active */ - int direct_key_low_active; - /* give board a chance to choose the start direct key */ - unsigned int direct_key_mask; - - /* rotary encoders 0 */ - int enable_rotary0; - int rotary0_rel_code; - int rotary0_up_key; - int rotary0_down_key; - - /* rotary encoders 1 */ - int enable_rotary1; - int rotary1_rel_code; - int rotary1_up_key; - int rotary1_down_key; - - /* key debounce interval */ - unsigned int debounce_interval; - - /* clear wakeup event requirement for pxa168 */ - void (*clear_wakeup_event)(void); -}; - -extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info); - -#endif /* __ASM_ARCH_PXA27x_KEYPAD_H */ diff --git a/include/linux/platform_data/keyscan-davinci.h b/include/linux/platform_data/keyscan-davinci.h deleted file mode 100644 index 260d596ba0af..000000000000 --- a/include/linux/platform_data/keyscan-davinci.h +++ /dev/null @@ -1,29 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2009 Texas Instruments, Inc - * - * Author: Miguel Aguilar <miguel.aguilar@ridgerun.com> - */ - -#ifndef DAVINCI_KEYSCAN_H -#define DAVINCI_KEYSCAN_H - -#include <linux/io.h> - -enum davinci_matrix_types { - DAVINCI_KEYSCAN_MATRIX_4X4, - DAVINCI_KEYSCAN_MATRIX_5X3, -}; - -struct davinci_ks_platform_data { - int (*device_enable)(struct device *dev); - unsigned short *keymap; - u32 keymapsize; - u8 rep:1; - u8 strobe; - u8 interval; - u8 matrix_type; -}; - -#endif - diff --git a/include/linux/platform_data/lp855x.h b/include/linux/platform_data/lp855x.h index ab222dd05bbc..3b4a891acefe 100644 --- a/include/linux/platform_data/lp855x.h +++ b/include/linux/platform_data/lp855x.h @@ -124,12 +124,12 @@ struct lp855x_rom_data { }; /** - * struct lp855x_platform_data + * struct lp855x_platform_data - lp855 platform-specific data * @name : Backlight driver name. If it is not defined, default name is set. * @device_control : value of DEVICE CONTROL register * @initial_brightness : initial value of backlight brightness * @period_ns : platform specific pwm period value. unit is nano. - Only valid when mode is PWM_BASED. + * Only valid when mode is PWM_BASED. * @size_program : total size of lp855x_rom_data * @rom_data : list of new eeprom/eprom registers */ diff --git a/include/linux/platform_data/microchip-ksz.h b/include/linux/platform_data/microchip-ksz.h index 0e0e8fe6975f..028781ad4059 100644 --- a/include/linux/platform_data/microchip-ksz.h +++ b/include/linux/platform_data/microchip-ksz.h @@ -23,6 +23,7 @@ #include <linux/platform_data/dsa.h> enum ksz_chip_id { + KSZ8463_CHIP_ID = 0x8463, KSZ8563_CHIP_ID = 0x8563, KSZ8795_CHIP_ID = 0x8795, KSZ8794_CHIP_ID = 0x8794, diff --git a/include/linux/platform_data/mlxreg.h b/include/linux/platform_data/mlxreg.h index 0b9f81a6f753..f6cca7a035c7 100644 --- a/include/linux/platform_data/mlxreg.h +++ b/include/linux/platform_data/mlxreg.h @@ -209,7 +209,7 @@ struct mlxreg_core_platform_data { * @items: same type components with the hotplug capability; * @irq: platform interrupt number; * @regmap: register map of parent device; - * @counter: number of the components with the hotplug capability; + * @count: number of the components with the hotplug capability; * @cell: location of top aggregation interrupt register; * @mask: top aggregation interrupt common mask; * @cell_low: location of low aggregation interrupt register; @@ -224,7 +224,7 @@ struct mlxreg_core_hotplug_platform_data { struct mlxreg_core_item *items; int irq; void *regmap; - int counter; + int count; u32 cell; u32 mask; u32 cell_low; diff --git a/include/linux/platform_data/mtd-nand-s3c2410.h b/include/linux/platform_data/mtd-nand-s3c2410.h deleted file mode 100644 index 25390fc3e795..000000000000 --- a/include/linux/platform_data/mtd-nand-s3c2410.h +++ /dev/null @@ -1,70 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (c) 2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 - NAND device controller platform_device info -*/ - -#ifndef __MTD_NAND_S3C2410_H -#define __MTD_NAND_S3C2410_H - -#include <linux/mtd/rawnand.h> - -/** - * struct s3c2410_nand_set - define a set of one or more nand chips - * @flash_bbt: Openmoko u-boot can create a Bad Block Table - * Setting this flag will allow the kernel to - * look for it at boot time and also skip the NAND - * scan. - * @options: Default value to set into 'struct nand_chip' options. - * @nr_chips: Number of chips in this set - * @nr_partitions: Number of partitions pointed to by @partitions - * @name: Name of set (optional) - * @nr_map: Map for low-layer logical to physical chip numbers (option) - * @partitions: The mtd partition list - * - * define a set of one or more nand chips registered with an unique mtd. Also - * allows to pass flag to the underlying NAND layer. 'disable_ecc' will trigger - * a warning at boot time. - */ -struct s3c2410_nand_set { - unsigned int flash_bbt:1; - - unsigned int options; - int nr_chips; - int nr_partitions; - char *name; - int *nr_map; - struct mtd_partition *partitions; - struct device_node *of_node; -}; - -struct s3c2410_platform_nand { - /* timing information for controller, all times in nanoseconds */ - - int tacls; /* time for active CLE/ALE to nWE/nOE */ - int twrph0; /* active time for nWE/nOE */ - int twrph1; /* time for release CLE/ALE from nWE/nOE inactive */ - - unsigned int ignore_unset_ecc:1; - - enum nand_ecc_engine_type engine_type; - - int nr_sets; - struct s3c2410_nand_set *sets; - - void (*select_chip)(struct s3c2410_nand_set *, - int chip); -}; - -/** - * s3c_nand_set_platdata() - register NAND platform data. - * @nand: The NAND platform data to register with s3c_device_nand. - * - * This function copies the given NAND platform data, @nand and registers - * it with the s3c_device_nand. This allows @nand to be __initdata. -*/ -extern void s3c_nand_set_platdata(struct s3c2410_platform_nand *nand); - -#endif /*__MTD_NAND_S3C2410_H */ diff --git a/include/linux/platform_data/sa11x0-serial.h b/include/linux/platform_data/sa11x0-serial.h index 8b79ab08af45..a88096bc74e4 100644 --- a/include/linux/platform_data/sa11x0-serial.h +++ b/include/linux/platform_data/sa11x0-serial.h @@ -10,7 +10,6 @@ #define SA11X0_SERIAL_H struct uart_port; -struct uart_info; /* * This is a temporary structure for registering these diff --git a/include/linux/platform_data/spi-davinci.h b/include/linux/platform_data/spi-davinci.h deleted file mode 100644 index 2cb5cc70fd9d..000000000000 --- a/include/linux/platform_data/spi-davinci.h +++ /dev/null @@ -1,73 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright 2009 Texas Instruments. - */ - -#ifndef __ARCH_ARM_DAVINCI_SPI_H -#define __ARCH_ARM_DAVINCI_SPI_H - -#include <linux/platform_data/edma.h> - -#define SPI_INTERN_CS 0xFF - -enum { - SPI_VERSION_1, /* For DM355/DM365/DM6467 */ - SPI_VERSION_2, /* For DA8xx */ -}; - -/** - * davinci_spi_platform_data - Platform data for SPI master device on DaVinci - * - * @version: version of the SPI IP. Different DaVinci devices have slightly - * varying versions of the same IP. - * @num_chipselect: number of chipselects supported by this SPI master - * @intr_line: interrupt line used to connect the SPI IP to the ARM interrupt - * controller withn the SoC. Possible values are 0 and 1. - * @cshold_bug: set this to true if the SPI controller on your chip requires - * a write to CSHOLD bit in between transfers (like in DM355). - * @dma_event_q: DMA event queue to use if SPI_IO_TYPE_DMA is used for any - * device on the bus. - */ -struct davinci_spi_platform_data { - u8 version; - u8 num_chipselect; - u8 intr_line; - u8 prescaler_limit; - bool cshold_bug; - enum dma_event_q dma_event_q; -}; - -/** - * davinci_spi_config - Per-chip-select configuration for SPI slave devices - * - * @wdelay: amount of delay between transmissions. Measured in number of - * SPI module clocks. - * @odd_parity: polarity of parity flag at the end of transmit data stream. - * 0 - odd parity, 1 - even parity. - * @parity_enable: enable transmission of parity at end of each transmit - * data stream. - * @io_type: type of IO transfer. Choose between polled, interrupt and DMA. - * @timer_disable: disable chip-select timers (setup and hold) - * @c2tdelay: chip-select setup time. Measured in number of SPI module clocks. - * @t2cdelay: chip-select hold time. Measured in number of SPI module clocks. - * @t2edelay: transmit data finished to SPI ENAn pin inactive time. Measured - * in number of SPI clocks. - * @c2edelay: chip-select active to SPI ENAn signal active time. Measured in - * number of SPI clocks. - */ -struct davinci_spi_config { - u8 wdelay; - u8 odd_parity; - u8 parity_enable; -#define SPI_IO_TYPE_INTR 0 -#define SPI_IO_TYPE_POLL 1 -#define SPI_IO_TYPE_DMA 2 - u8 io_type; - u8 timer_disable; - u8 c2tdelay; - u8 t2cdelay; - u8 t2edelay; - u8 c2edelay; -}; - -#endif /* __ARCH_ARM_DAVINCI_SPI_H */ diff --git a/include/linux/platform_data/syscon.h b/include/linux/platform_data/syscon.h deleted file mode 100644 index 2c089dd3e2bd..000000000000 --- a/include/linux/platform_data/syscon.h +++ /dev/null @@ -1,9 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef PLATFORM_DATA_SYSCON_H -#define PLATFORM_DATA_SYSCON_H - -struct syscon_platform_data { - const char *label; -}; - -#endif diff --git a/include/linux/platform_data/tmio.h b/include/linux/platform_data/tmio.h index b060124ba1ae..426291713b83 100644 --- a/include/linux/platform_data/tmio.h +++ b/include/linux/platform_data/tmio.h @@ -47,6 +47,9 @@ /* Some controllers have a CBSY bit */ #define TMIO_MMC_HAVE_CBSY BIT(11) +/* Some controllers have a 64-bit wide data port register */ +#define TMIO_MMC_64BIT_DATA_PORT BIT(12) + struct tmio_mmc_data { void *chan_priv_tx; void *chan_priv_rx; diff --git a/include/linux/platform_data/touchscreen-s3c2410.h b/include/linux/platform_data/touchscreen-s3c2410.h deleted file mode 100644 index bf8d3b9d7c6a..000000000000 --- a/include/linux/platform_data/touchscreen-s3c2410.h +++ /dev/null @@ -1,22 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org> -*/ - -#ifndef __TOUCHSCREEN_S3C2410_H -#define __TOUCHSCREEN_S3C2410_H - -struct s3c2410_ts_mach_info { - int delay; - int presc; - int oversampling_shift; - void (*cfg_gpio)(struct platform_device *dev); -}; - -extern void s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *); -extern void s3c64xx_ts_set_platdata(struct s3c2410_ts_mach_info *); - -/* defined by architecture to configure gpio */ -extern void s3c24xx_ts_cfg_gpio(struct platform_device *dev); - -#endif /*__TOUCHSCREEN_S3C2410_H */ diff --git a/include/linux/platform_data/usb-davinci.h b/include/linux/platform_data/usb-davinci.h deleted file mode 100644 index 879f5c78b91a..000000000000 --- a/include/linux/platform_data/usb-davinci.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * USB related definitions - * - * Copyright (C) 2009 MontaVista Software, Inc. <source@mvista.com> - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_USB_H -#define __ASM_ARCH_USB_H - -/* Passed as the platform data to the OHCI driver */ -struct da8xx_ohci_root_hub { - /* Time from power on to power good (in 2 ms units) */ - u8 potpgt; -}; - -void davinci_setup_usb(unsigned mA, unsigned potpgt_ms); - -#endif /* ifndef __ASM_ARCH_USB_H */ diff --git a/include/linux/platform_data/video-pxafb.h b/include/linux/platform_data/video-pxafb.h index 6333bac166a5..38c24c77ba43 100644 --- a/include/linux/platform_data/video-pxafb.h +++ b/include/linux/platform_data/video-pxafb.h @@ -150,7 +150,6 @@ struct pxafb_mach_info { }; void pxa_set_fb_info(struct device *, struct pxafb_mach_info *); -unsigned long pxafb_get_hsync_time(struct device *dev); /* smartpanel related */ #define SMART_CMD_A0 (0x1 << 8) diff --git a/include/linux/platform_data/x86/amd-fch.h b/include/linux/platform_data/x86/amd-fch.h new file mode 100644 index 000000000000..2cf5153edbc2 --- /dev/null +++ b/include/linux/platform_data/x86/amd-fch.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_X86_AMD_FCH_H_ +#define _ASM_X86_AMD_FCH_H_ + +#define FCH_PM_BASE 0xFED80300 + +/* Register offsets from PM base: */ +#define FCH_PM_DECODEEN 0x00 +#define FCH_PM_DECODEEN_SMBUS0SEL GENMASK(20, 19) +#define FCH_PM_SCRATCH 0x80 +#define FCH_PM_S5_RESET_STATUS 0xC0 + +#endif /* _ASM_X86_AMD_FCH_H_ */ diff --git a/include/linux/platform_data/x86/asus-wmi-leds-ids.h b/include/linux/platform_data/x86/asus-wmi-leds-ids.h new file mode 100644 index 000000000000..034a039c4e37 --- /dev/null +++ b/include/linux/platform_data/x86/asus-wmi-leds-ids.h @@ -0,0 +1,50 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __PLATFORM_DATA_X86_ASUS_WMI_LEDS_IDS_H +#define __PLATFORM_DATA_X86_ASUS_WMI_LEDS_IDS_H + +#include <linux/dmi.h> +#include <linux/types.h> + +/* To be used by both hid-asus and asus-wmi to determine which controls kbd_brightness */ +#if IS_REACHABLE(CONFIG_ASUS_WMI) || IS_REACHABLE(CONFIG_HID_ASUS) +static const struct dmi_system_id asus_use_hid_led_dmi_ids[] = { + { + .matches = { + DMI_MATCH(DMI_PRODUCT_FAMILY, "ROG Zephyrus"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_PRODUCT_FAMILY, "ROG Strix"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_PRODUCT_FAMILY, "ROG Flow"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_PRODUCT_FAMILY, "ProArt P16"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "GA403U"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "GU605M"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "RC71L"), + }, + }, + { }, +}; +#endif + +#endif /* __PLATFORM_DATA_X86_ASUS_WMI_LEDS_IDS_H */ diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h index 365e119bebaa..419491d4abca 100644 --- a/include/linux/platform_data/x86/asus-wmi.h +++ b/include/linux/platform_data/x86/asus-wmi.h @@ -4,7 +4,9 @@ #include <linux/errno.h> #include <linux/types.h> -#include <linux/dmi.h> + +#define ASUS_WMI_MGMT_GUID "97845ED0-4E6D-11DE-8A39-0800200C9A66" +#define ASUS_ACPI_UID_ASUSWMI "ASUSWMI" /* WMI Methods */ #define ASUS_WMI_METHODID_SPEC 0x43455053 /* BIOS SPECification */ @@ -73,12 +75,14 @@ #define ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO 0x00110019 /* Misc */ +#define ASUS_WMI_DEVID_PANEL_HD 0x0005001C #define ASUS_WMI_DEVID_PANEL_OD 0x00050019 #define ASUS_WMI_DEVID_CAMERA 0x00060013 #define ASUS_WMI_DEVID_LID_FLIP 0x00060062 #define ASUS_WMI_DEVID_LID_FLIP_ROG 0x00060077 #define ASUS_WMI_DEVID_MINI_LED_MODE 0x0005001E #define ASUS_WMI_DEVID_MINI_LED_MODE2 0x0005002E +#define ASUS_WMI_DEVID_SCREEN_AUTO_BRIGHTNESS 0x0005002A /* Storage */ #define ASUS_WMI_DEVID_CARDREADER 0x00080013 @@ -103,7 +107,7 @@ #define ASUS_WMI_DEVID_PPT_PL1_SPL 0x001200A3 #define ASUS_WMI_DEVID_PPT_APU_SPPT 0x001200B0 #define ASUS_WMI_DEVID_PPT_PLAT_SPPT 0x001200B1 -#define ASUS_WMI_DEVID_PPT_FPPT 0x001200C1 +#define ASUS_WMI_DEVID_PPT_PL3_FPPT 0x001200C1 #define ASUS_WMI_DEVID_NV_DYN_BOOST 0x001200C0 #define ASUS_WMI_DEVID_NV_THERM_TARGET 0x001200C2 @@ -133,6 +137,11 @@ /* dgpu on/off */ #define ASUS_WMI_DEVID_DGPU 0x00090020 +#define ASUS_WMI_DEVID_APU_MEM 0x000600C1 + +#define ASUS_WMI_DEVID_DGPU_BASE_TGP 0x00120099 +#define ASUS_WMI_DEVID_DGPU_SET_TGP 0x00120098 + /* gpu mux switch, 0 = dGPU, 1 = Optimus */ #define ASUS_WMI_DEVID_GPU_MUX 0x00090016 #define ASUS_WMI_DEVID_GPU_MUX_VIVO 0x00090026 @@ -157,9 +166,33 @@ #define ASUS_WMI_DSTS_MAX_BRIGTH_MASK 0x0000FF00 #define ASUS_WMI_DSTS_LIGHTBAR_MASK 0x0000000F +enum asus_ally_mcu_hack { + ASUS_WMI_ALLY_MCU_HACK_INIT, + ASUS_WMI_ALLY_MCU_HACK_ENABLED, + ASUS_WMI_ALLY_MCU_HACK_DISABLED, +}; + #if IS_REACHABLE(CONFIG_ASUS_WMI) +void set_ally_mcu_hack(enum asus_ally_mcu_hack status); +void set_ally_mcu_powersave(bool enabled); +int asus_wmi_get_devstate_dsts(u32 dev_id, u32 *retval); +int asus_wmi_set_devstate(u32 dev_id, u32 ctrl_param, u32 *retval); int asus_wmi_evaluate_method(u32 method_id, u32 arg0, u32 arg1, u32 *retval); #else +static inline void set_ally_mcu_hack(enum asus_ally_mcu_hack status) +{ +} +static inline void set_ally_mcu_powersave(bool enabled) +{ +} +static inline int asus_wmi_set_devstate(u32 dev_id, u32 ctrl_param, u32 *retval) +{ + return -ENODEV; +} +static inline int asus_wmi_get_devstate_dsts(u32 dev_id, u32 *retval) +{ + return -ENODEV; +} static inline int asus_wmi_evaluate_method(u32 method_id, u32 arg0, u32 arg1, u32 *retval) { @@ -167,39 +200,4 @@ static inline int asus_wmi_evaluate_method(u32 method_id, u32 arg0, u32 arg1, } #endif -/* To be used by both hid-asus and asus-wmi to determine which controls kbd_brightness */ -static const struct dmi_system_id asus_use_hid_led_dmi_ids[] = { - { - .matches = { - DMI_MATCH(DMI_PRODUCT_FAMILY, "ROG Zephyrus"), - }, - }, - { - .matches = { - DMI_MATCH(DMI_PRODUCT_FAMILY, "ROG Strix"), - }, - }, - { - .matches = { - DMI_MATCH(DMI_PRODUCT_FAMILY, "ROG Flow"), - }, - }, - { - .matches = { - DMI_MATCH(DMI_BOARD_NAME, "GA403U"), - }, - }, - { - .matches = { - DMI_MATCH(DMI_BOARD_NAME, "GU605M"), - }, - }, - { - .matches = { - DMI_MATCH(DMI_BOARD_NAME, "RC71L"), - }, - }, - { }, -}; - #endif /* __PLATFORM_DATA_X86_ASUS_WMI_H */ diff --git a/include/linux/platform_data/x86/int3472.h b/include/linux/platform_data/x86/int3472.h new file mode 100644 index 000000000000..b1b837583d54 --- /dev/null +++ b/include/linux/platform_data/x86/int3472.h @@ -0,0 +1,166 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Intel INT3472 ACPI camera sensor power-management support + * + * Author: Dan Scally <djrscally@gmail.com> + */ + +#ifndef __PLATFORM_DATA_X86_INT3472_H +#define __PLATFORM_DATA_X86_INT3472_H + +#include <linux/clk-provider.h> +#include <linux/gpio/machine.h> +#include <linux/leds.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/types.h> + +/* FIXME drop this once the I2C_DEV_NAME_FORMAT macro has been added to include/linux/i2c.h */ +#ifndef I2C_DEV_NAME_FORMAT +#define I2C_DEV_NAME_FORMAT "i2c-%s" +#endif + +/* PMIC GPIO Types */ +#define INT3472_GPIO_TYPE_RESET 0x00 +#define INT3472_GPIO_TYPE_POWERDOWN 0x01 +#define INT3472_GPIO_TYPE_POWER_ENABLE 0x0b +#define INT3472_GPIO_TYPE_CLK_ENABLE 0x0c +#define INT3472_GPIO_TYPE_PRIVACY_LED 0x0d +#define INT3472_GPIO_TYPE_HANDSHAKE 0x12 +#define INT3472_GPIO_TYPE_HOTPLUG_DETECT 0x13 + +#define INT3472_PDEV_MAX_NAME_LEN 23 +#define INT3472_MAX_SENSOR_GPIOS 3 +#define INT3472_MAX_REGULATORS 3 + +/* E.g. "avdd\0" */ +#define GPIO_SUPPLY_NAME_LENGTH 5 +/* 12 chars for acpi_dev_name() + "-", e.g. "ABCD1234:00-" */ +#define GPIO_REGULATOR_NAME_LENGTH (12 + GPIO_SUPPLY_NAME_LENGTH) +/* lower- and upper-case mapping */ +#define GPIO_REGULATOR_SUPPLY_MAP_COUNT 2 +/* + * Ensure the GPIO is driven low/high for at least 2 ms before changing. + * + * 2 ms has been chosen because it is the minimum time ovXXXX sensors need to + * have their reset line driven logical high to properly register a reset. + */ +#define GPIO_REGULATOR_ENABLE_TIME (2 * USEC_PER_MSEC) +#define GPIO_REGULATOR_OFF_ON_DELAY (2 * USEC_PER_MSEC) + +#define INT3472_LED_MAX_NAME_LEN 32 + +#define CIO2_SENSOR_SSDB_MCLKSPEED_OFFSET 86 + +#define INT3472_REGULATOR(_name, _ops, _enable_time, _off_on_delay) \ + (const struct regulator_desc) { \ + .name = _name, \ + .type = REGULATOR_VOLTAGE, \ + .ops = _ops, \ + .owner = THIS_MODULE, \ + .enable_time = _enable_time, \ + .off_on_delay = _off_on_delay, \ + } + +#define to_int3472_clk(hw) \ + container_of(hw, struct int3472_clock, clk_hw) + +#define to_int3472_device(clk) \ + container_of(clk, struct int3472_discrete_device, clock) + +struct acpi_device; +struct dmi_system_id; +struct i2c_client; +struct platform_device; + +struct int3472_cldb { + u8 version; + /* + * control logic type + * 0: UNKNOWN + * 1: DISCRETE(CRD-D) + * 2: PMIC TPS68470 + * 3: PMIC uP6641 + */ + u8 control_logic_type; + u8 control_logic_id; + u8 sensor_card_sku; + u8 reserved[10]; + u8 clock_source; + u8 reserved2[17]; +}; + +struct int3472_discrete_quirks { + /* For models where AVDD GPIO is shared between sensors */ + const char *avdd_second_sensor; +}; + +struct int3472_gpio_regulator { + /* SUPPLY_MAP_COUNT * 2 to make room for second sensor mappings */ + struct regulator_consumer_supply supply_map[GPIO_REGULATOR_SUPPLY_MAP_COUNT * 2]; + char supply_name_upper[GPIO_SUPPLY_NAME_LENGTH]; + char regulator_name[GPIO_REGULATOR_NAME_LENGTH]; + struct regulator_dev *rdev; + struct regulator_desc rdesc; +}; + +struct int3472_discrete_device { + struct acpi_device *adev; + struct device *dev; + struct acpi_device *sensor; + const char *sensor_name; + + struct int3472_gpio_regulator regulators[INT3472_MAX_REGULATORS]; + + struct int3472_clock { + struct clk *clk; + struct clk_hw clk_hw; + struct clk_lookup *cl; + struct gpio_desc *ena_gpio; + u32 frequency; + u8 imgclk_index; + } clock; + + struct int3472_pled { + struct led_classdev classdev; + struct led_lookup_data lookup; + char name[INT3472_LED_MAX_NAME_LEN]; + struct gpio_desc *gpio; + } pled; + + struct int3472_discrete_quirks quirks; + + unsigned int ngpios; /* how many GPIOs have we seen */ + unsigned int n_sensor_gpios; /* how many have we mapped to sensor */ + unsigned int n_regulator_gpios; /* how many have we mapped to a regulator */ + struct gpiod_lookup_table gpios; +}; + +extern const struct dmi_system_id skl_int3472_discrete_quirks[]; + +union acpi_object *skl_int3472_get_acpi_buffer(struct acpi_device *adev, + char *id); +int skl_int3472_fill_cldb(struct acpi_device *adev, struct int3472_cldb *cldb); +int skl_int3472_get_sensor_adev_and_name(struct device *dev, + struct acpi_device **sensor_adev_ret, + const char **name_ret); + +int int3472_discrete_parse_crs(struct int3472_discrete_device *int3472); +void int3472_discrete_cleanup(struct int3472_discrete_device *int3472); + +int skl_int3472_register_gpio_clock(struct int3472_discrete_device *int3472, + struct gpio_desc *gpio); +int skl_int3472_register_dsm_clock(struct int3472_discrete_device *int3472); +void skl_int3472_unregister_clock(struct int3472_discrete_device *int3472); + +int skl_int3472_register_regulator(struct int3472_discrete_device *int3472, + struct gpio_desc *gpio, + unsigned int enable_time, + const char *supply_name, + const char *second_sensor); +void skl_int3472_unregister_regulator(struct int3472_discrete_device *int3472); + +int skl_int3472_register_pled(struct int3472_discrete_device *int3472, struct gpio_desc *gpio); +void skl_int3472_unregister_pled(struct int3472_discrete_device *int3472); + +#endif diff --git a/include/linux/platform_data/x86/intel_pmc_ipc.h b/include/linux/platform_data/x86/intel_pmc_ipc.h new file mode 100644 index 000000000000..85ea381e4a27 --- /dev/null +++ b/include/linux/platform_data/x86/intel_pmc_ipc.h @@ -0,0 +1,98 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Intel Core SoC Power Management Controller Header File + * + * Copyright (c) 2025, Intel Corporation. + * All Rights Reserved. + * + */ +#ifndef INTEL_PMC_IPC_H +#define INTEL_PMC_IPC_H +#include <linux/acpi.h> +#include <linux/cleanup.h> + +#define IPC_SOC_REGISTER_ACCESS 0xAA +#define IPC_SOC_SUB_CMD_READ 0x00 +#define IPC_SOC_SUB_CMD_WRITE 0x01 +#define PMC_IPCS_PARAM_COUNT 7 +#define VALID_IPC_RESPONSE 5 + +struct pmc_ipc_cmd { + u32 cmd; + u32 sub_cmd; + u32 size; + u32 wbuf[4]; +}; + +struct pmc_ipc_rbuf { + u32 buf[4]; +}; + +/** + * intel_pmc_ipc() - PMC IPC Mailbox accessor + * @ipc_cmd: Prepared input command to send + * @rbuf: Allocated array for returned IPC data + * + * Return: 0 on success. Non-zero on mailbox error + */ +static inline int intel_pmc_ipc(struct pmc_ipc_cmd *ipc_cmd, struct pmc_ipc_rbuf *rbuf) +{ +#ifdef CONFIG_ACPI + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object params[PMC_IPCS_PARAM_COUNT] = { + {.type = ACPI_TYPE_INTEGER,}, + {.type = ACPI_TYPE_INTEGER,}, + {.type = ACPI_TYPE_INTEGER,}, + {.type = ACPI_TYPE_INTEGER,}, + {.type = ACPI_TYPE_INTEGER,}, + {.type = ACPI_TYPE_INTEGER,}, + {.type = ACPI_TYPE_INTEGER,}, + }; + struct acpi_object_list arg_list = { PMC_IPCS_PARAM_COUNT, params }; + int status; + + if (!ipc_cmd || !rbuf) + return -EINVAL; + + /* + * 0: IPC Command + * 1: IPC Sub Command + * 2: Size + * 3-6: Write Buffer for offset + */ + params[0].integer.value = ipc_cmd->cmd; + params[1].integer.value = ipc_cmd->sub_cmd; + params[2].integer.value = ipc_cmd->size; + params[3].integer.value = ipc_cmd->wbuf[0]; + params[4].integer.value = ipc_cmd->wbuf[1]; + params[5].integer.value = ipc_cmd->wbuf[2]; + params[6].integer.value = ipc_cmd->wbuf[3]; + + status = acpi_evaluate_object(NULL, "\\IPCS", &arg_list, &buffer); + if (ACPI_FAILURE(status)) + return -ENODEV; + + union acpi_object *obj __free(kfree) = buffer.pointer; + + if (obj && obj->type == ACPI_TYPE_PACKAGE && + obj->package.count == VALID_IPC_RESPONSE) { + const union acpi_object *objs = obj->package.elements; + + if ((u8)objs[0].integer.value != 0) + return -EINVAL; + + rbuf->buf[0] = objs[1].integer.value; + rbuf->buf[1] = objs[2].integer.value; + rbuf->buf[2] = objs[3].integer.value; + rbuf->buf[3] = objs[4].integer.value; + } else { + return -EINVAL; + } + + return 0; +#else + return -ENODEV; +#endif /* CONFIG_ACPI */ +} + +#endif /* INTEL_PMC_IPC_H */ diff --git a/include/linux/platform_data/x86/pwm-lpss.h b/include/linux/platform_data/x86/pwm-lpss.h index 752c06b47cc8..f0349edb47f4 100644 --- a/include/linux/platform_data/x86/pwm-lpss.h +++ b/include/linux/platform_data/x86/pwm-lpss.h @@ -15,9 +15,36 @@ struct pwm_lpss_boardinfo { unsigned int npwm; unsigned long base_unit_bits; /* - * Some versions of the IP may stuck in the state machine if enable - * bit is not set, and hence update bit will show busy status till - * the reset. For the rest it may be otherwise. + * NOTE: + * Intel Broxton, Apollo Lake, and Gemini Lake have different programming flow. + * + * Initial Enable or First Activation + * 1. Program the base unit and on time divisor values. + * 2. Set the software update bit. + * 3. Poll in a loop on the PWMCTRL bit until software update bit is cleared.+ + * 4. Enable the PWM output by setting PWM Enable. + * 5. Repeat the above steps for the next PWM Module. + * + * Dynamic update while PWM is Enabled + * 1. Program the base unit and on-time divisor values. + * 2. Set the software update bit. + * 3. Repeat the above steps for the next PWM module. + * + * + After setting PWMCTRL register's SW update bit, hardware automatically + * deasserts the SW update bit after a brief delay. It was observed that + * setting of PWM enable is typically done via read-modify-write of the PWMCTRL + * register. If there is no/little delay between setting software update bit + * and setting enable bit via read-modify-write, it is possible that the read + * could return with software enable as 1. In that case, the last write to set + * enable to 1 could also set sw_update to 1. If this happens, sw_update gets + * stuck and the driver code can hang as it explicitly waits for sw_update bit + * to be 0 after setting the enable bit to 1. To avoid this race condition, + * SW should poll on the software update bit to make sure that it is 0 before + * doing the read-modify-write to set the enable bit to 1. + * + * Also, we noted that if sw_update bit was set in step #1 above then when it + * is set again in step #2, sw_update bit never gets cleared and the flow hangs. + * As such, we need to make sure that sw_update bit is 0 when doing step #1. */ bool bypass; /* |