diff options
Diffstat (limited to 'include/linux/regmap.h')
| -rw-r--r-- | include/linux/regmap.h | 1157 |
1 files changed, 1053 insertions, 104 deletions
diff --git a/include/linux/regmap.h b/include/linux/regmap.h index 978abfbac617..b0b9be750d93 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ #ifndef __LINUX_REGMAP_H #define __LINUX_REGMAP_H @@ -7,36 +8,70 @@ * Copyright 2011 Wolfson Microelectronics plc * * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/list.h> #include <linux/rbtree.h> +#include <linux/ktime.h> #include <linux/delay.h> #include <linux/err.h> #include <linux/bug.h> #include <linux/lockdep.h> +#include <linux/iopoll.h> +#include <linux/fwnode.h> struct module; +struct clk; struct device; +struct device_node; +struct fsi_device; struct i2c_client; +struct i3c_device; struct irq_domain; +struct mdio_device; +struct slim_device; struct spi_device; struct spmi_device; struct regmap; struct regmap_range_cfg; struct regmap_field; struct snd_ac97; +struct sdw_slave; + +/* + * regmap_mdio address encoding. IEEE 802.3ae clause 45 addresses consist of a + * device address and a register address. + */ +#define REGMAP_MDIO_C45_DEVAD_SHIFT 16 +#define REGMAP_MDIO_C45_DEVAD_MASK GENMASK(20, 16) +#define REGMAP_MDIO_C45_REGNUM_MASK GENMASK(15, 0) -/* An enum of all the supported cache types */ +/* + * regmap.reg_shift indicates by how much we must shift registers prior to + * performing any operation. It's a signed value, positive numbers means + * downshifting the register's address, while negative numbers means upshifting. + */ +#define REGMAP_UPSHIFT(s) (-(s)) +#define REGMAP_DOWNSHIFT(s) (s) + +/* + * The supported cache types, the default is no cache. Any new caches should + * usually use the maple tree cache unless they specifically require that there + * are never any allocations at runtime in which case they should use the sparse + * flat cache. The rbtree cache *may* have some performance advantage for very + * low end systems that make heavy use of cache syncs but is mainly legacy. + * These caches are sparse and entries will be initialized from hardware if no + * default has been provided. + * The non-sparse flat cache is provided for compatibility with existing users + * and will zero-initialize cache entries for which no defaults are provided. + * New users should use the sparse flat cache. + */ enum regcache_type { REGCACHE_NONE, REGCACHE_RBTREE, - REGCACHE_COMPRESSED, REGCACHE_FLAT, + REGCACHE_MAPLE, + REGCACHE_FLAT_S, }; /** @@ -69,35 +104,12 @@ struct reg_sequence { unsigned int delay_us; }; -#define regmap_update_bits(map, reg, mask, val) \ - regmap_update_bits_base(map, reg, mask, val, NULL, false, false) -#define regmap_update_bits_async(map, reg, mask, val)\ - regmap_update_bits_base(map, reg, mask, val, NULL, true, false) -#define regmap_update_bits_check(map, reg, mask, val, change)\ - regmap_update_bits_base(map, reg, mask, val, change, false, false) -#define regmap_update_bits_check_async(map, reg, mask, val, change)\ - regmap_update_bits_base(map, reg, mask, val, change, true, false) - -#define regmap_write_bits(map, reg, mask, val) \ - regmap_update_bits_base(map, reg, mask, val, NULL, false, true) - -#define regmap_field_write(field, val) \ - regmap_field_update_bits_base(field, ~0, val, NULL, false, false) -#define regmap_field_force_write(field, val) \ - regmap_field_update_bits_base(field, ~0, val, NULL, false, true) -#define regmap_field_update_bits(field, mask, val)\ - regmap_field_update_bits_base(field, mask, val, NULL, false, false) -#define regmap_field_force_update_bits(field, mask, val) \ - regmap_field_update_bits_base(field, mask, val, NULL, false, true) - -#define regmap_fields_write(field, id, val) \ - regmap_fields_update_bits_base(field, id, ~0, val, NULL, false, false) -#define regmap_fields_force_write(field, id, val) \ - regmap_fields_update_bits_base(field, id, ~0, val, NULL, false, true) -#define regmap_fields_update_bits(field, id, mask, val)\ - regmap_fields_update_bits_base(field, id, mask, val, NULL, false, false) -#define regmap_fields_force_update_bits(field, id, mask, val) \ - regmap_fields_update_bits_base(field, id, mask, val, NULL, false, true) +#define REG_SEQ(_reg, _def, _delay_us) { \ + .reg = _reg, \ + .def = _def, \ + .delay_us = _delay_us, \ + } +#define REG_SEQ0(_reg, _def) REG_SEQ(_reg, _def, 0) /** * regmap_read_poll_timeout - Poll until a condition is met or a timeout occurs @@ -106,37 +118,95 @@ struct reg_sequence { * @addr: Address to poll * @val: Unsigned integer variable to read the value into * @cond: Break condition (usually involving @val) - * @sleep_us: Maximum time to sleep between reads in us (0 - * tight-loops). Should be less than ~20ms since usleep_range - * is used (see Documentation/timers/timers-howto.txt). + * @sleep_us: Maximum time to sleep between reads in us (0 tight-loops). Please + * read usleep_range() function description for details and + * limitations. * @timeout_us: Timeout in us, 0 means never timeout * - * Returns 0 on success and -ETIMEDOUT upon a timeout or the regmap_read + * This is modelled after the readx_poll_timeout macros in linux/iopoll.h. + * + * Returns: 0 on success and -ETIMEDOUT upon a timeout or the regmap_read * error return value in case of a error read. In the two former cases, * the last read value at @addr is stored in @val. Must not be called * from atomic context if sleep_us or timeout_us are used. - * - * This is modelled after the readx_poll_timeout macros in linux/iopoll.h. */ #define regmap_read_poll_timeout(map, addr, val, cond, sleep_us, timeout_us) \ ({ \ - ktime_t timeout = ktime_add_us(ktime_get(), timeout_us); \ - int pollret; \ - might_sleep_if(sleep_us); \ + int __ret, __tmp; \ + __tmp = read_poll_timeout(regmap_read, __ret, __ret || (cond), \ + sleep_us, timeout_us, false, (map), (addr), &(val)); \ + __ret ?: __tmp; \ +}) + +/** + * regmap_read_poll_timeout_atomic - Poll until a condition is met or a timeout occurs + * + * @map: Regmap to read from + * @addr: Address to poll + * @val: Unsigned integer variable to read the value into + * @cond: Break condition (usually involving @val) + * @delay_us: Time to udelay between reads in us (0 tight-loops). Please + * read udelay() function description for details and + * limitations. + * @timeout_us: Timeout in us, 0 means never timeout + * + * This is modelled after the readx_poll_timeout_atomic macros in linux/iopoll.h. + * + * Note: In general regmap cannot be used in atomic context. If you want to use + * this macro then first setup your regmap for atomic use (flat or no cache + * and MMIO regmap). + * + * Returns: 0 on success and -ETIMEDOUT upon a timeout or the regmap_read + * error return value in case of a error read. In the two former cases, + * the last read value at @addr is stored in @val. + */ +#define regmap_read_poll_timeout_atomic(map, addr, val, cond, delay_us, timeout_us) \ +({ \ + u64 __timeout_us = (timeout_us); \ + unsigned long __delay_us = (delay_us); \ + ktime_t __timeout = ktime_add_us(ktime_get(), __timeout_us); \ + int __ret; \ for (;;) { \ - pollret = regmap_read((map), (addr), &(val)); \ - if (pollret) \ + __ret = regmap_read((map), (addr), &(val)); \ + if (__ret) \ break; \ if (cond) \ break; \ - if (timeout_us && ktime_compare(ktime_get(), timeout) > 0) { \ - pollret = regmap_read((map), (addr), &(val)); \ + if ((__timeout_us) && \ + ktime_compare(ktime_get(), __timeout) > 0) { \ + __ret = regmap_read((map), (addr), &(val)); \ break; \ } \ - if (sleep_us) \ - usleep_range((sleep_us >> 2) + 1, sleep_us); \ + if (__delay_us) \ + udelay(__delay_us); \ } \ - pollret ?: ((cond) ? 0 : -ETIMEDOUT); \ + __ret ?: ((cond) ? 0 : -ETIMEDOUT); \ +}) + +/** + * regmap_field_read_poll_timeout - Poll until a condition is met or timeout + * + * @field: Regmap field to read from + * @val: Unsigned integer variable to read the value into + * @cond: Break condition (usually involving @val) + * @sleep_us: Maximum time to sleep between reads in us (0 tight-loops). Please + * read usleep_range() function description for details and + * limitations. + * @timeout_us: Timeout in us, 0 means never timeout + * + * This is modelled after the readx_poll_timeout macros in linux/iopoll.h. + * + * Returns: 0 on success and -ETIMEDOUT upon a timeout or the regmap_field_read + * error return value in case of a error read. In the two former cases, + * the last read value at @addr is stored in @val. Must not be called + * from atomic context if sleep_us or timeout_us are used. + */ +#define regmap_field_read_poll_timeout(field, val, cond, sleep_us, timeout_us) \ +({ \ + int __ret, __tmp; \ + __tmp = read_poll_timeout(regmap_field_read, __ret, __ret || (cond), \ + sleep_us, timeout_us, false, (field), &(val)); \ + __ret ?: __tmp; \ }) #ifdef CONFIG_REGMAP @@ -196,6 +266,11 @@ typedef void (*regmap_unlock)(void *); * @reg_stride: The register address stride. Valid register addresses are a * multiple of this value. If set to 0, a value of 1 will be * used. + * @reg_shift: The number of bits to shift the register before performing any + * operations. Any positive number will be downshifted, and negative + * values will be upshifted + * @reg_base: Value to be added to every register address before performing any + * operation. * @pad_bits: Number of bits of padding between register and value. * @val_bits: Number of bits in a register value, mandatory. * @@ -220,30 +295,67 @@ typedef void (*regmap_unlock)(void *); * field is NULL but precious_table (see below) is not, the * check is performed on such table (a register is precious if * it belongs to one of the ranges specified by precious_table). - * @lock: Optional lock callback (overrides regmap's default lock - * function, based on spinlock or mutex). - * @unlock: As above for unlocking. - * @lock_arg: this field is passed as the only argument of lock/unlock - * functions (ignored in case regular lock/unlock functions - * are not overridden). + * @writeable_noinc_reg: Optional callback returning true if the register + * supports multiple write operations without incrementing + * the register number. If this field is NULL but + * wr_noinc_table (see below) is not, the check is + * performed on such table (a register is no increment + * writeable if it belongs to one of the ranges specified + * by wr_noinc_table). + * @readable_noinc_reg: Optional callback returning true if the register + * supports multiple read operations without incrementing + * the register number. If this field is NULL but + * rd_noinc_table (see below) is not, the check is + * performed on such table (a register is no increment + * readable if it belongs to one of the ranges specified + * by rd_noinc_table). * @reg_read: Optional callback that if filled will be used to perform * all the reads from the registers. Should only be provided for * devices whose read operation cannot be represented as a simple * read operation on a bus such as SPI, I2C, etc. Most of the * devices do not need this. * @reg_write: Same as above for writing. + * @reg_update_bits: Optional callback that if filled will be used to perform + * all the update_bits(rmw) operation. Should only be provided + * if the function require special handling with lock and reg + * handling and the operation cannot be represented as a simple + * update_bits operation on a bus such as SPI, I2C, etc. + * @read: Optional callback that if filled will be used to perform all the + * bulk reads from the registers. Data is returned in the buffer used + * to transmit data. + * @write: Same as above for writing. + * @max_raw_read: Max raw read size that can be used on the device. + * @max_raw_write: Max raw write size that can be used on the device. + * @can_sleep: Optional, specifies whether regmap operations can sleep. * @fast_io: Register IO is fast. Use a spinlock instead of a mutex * to perform locking. This field is ignored if custom lock/unlock * functions are used (see fields lock/unlock of struct regmap_config). * This field is a duplicate of a similar file in * 'struct regmap_bus' and serves exact same purpose. * Use it only for "no-bus" cases. + * @io_port: Support IO port accessors. Makes sense only when MMIO vs. IO port + * access can be distinguished. + * @disable_locking: This regmap is either protected by external means or + * is guaranteed not to be accessed from multiple threads. + * Don't use any locking mechanisms. + * @lock: Optional lock callback (overrides regmap's default lock + * function, based on spinlock or mutex). + * @unlock: As above for unlocking. + * @lock_arg: This field is passed as the only argument of lock/unlock + * functions (ignored in case regular lock/unlock functions + * are not overridden). * @max_register: Optional, specifies the maximum valid register address. + * @max_register_is_0: Optional, specifies that zero value in @max_register + * should be taken into account. This is a workaround to + * apply handling of @max_register for regmap that contains + * only one register. * @wr_table: Optional, points to a struct regmap_access_table specifying * valid ranges for write access. * @rd_table: As above, for read access. * @volatile_table: As above, for volatile registers. * @precious_table: As above, for precious registers. + * @wr_noinc_table: As above, for no increment writeable registers. + * @rd_noinc_table: As above, for no increment readable registers. * @reg_defaults: Power on reset values for registers (for use with * register cache support). * @num_reg_defaults: Number of elements in reg_defaults. @@ -252,10 +364,20 @@ typedef void (*regmap_unlock)(void *); * a read. * @write_flag_mask: Mask to be set in the top bytes of the register when doing * a write. If both read_flag_mask and write_flag_mask are - * empty the regmap_bus default masks are used. - * @use_single_rw: If set, converts the bulk read and write operations into - * a series of single read and write operations. This is useful - * for device that does not support bulk read and write. + * empty and zero_flag_mask is not set the regmap_bus default + * masks are used. + * @zero_flag_mask: If set, read_flag_mask and write_flag_mask are used even + * if they are both empty. + * @use_relaxed_mmio: If set, MMIO R/W operations will not use memory barriers. + * This can avoid load on devices which don't require strict + * orderings, but drivers should carefully add any explicit + * memory barriers when they may require them. + * @use_single_read: If set, converts the bulk read operation into a series of + * single read operations. This is useful for a device that + * does not support bulk read. + * @use_single_write: If set, converts the bulk write operation into a series of + * single write operations. This is useful for a device that + * does not support bulk write. * @can_multi_write: If set, the device supports the multi write mode of bulk * write operations, if clear multi write requests will be * split into individual write operations @@ -264,12 +386,17 @@ typedef void (*regmap_unlock)(void *); * @reg_defaults_raw: Power on reset values for registers (for use with * register cache support). * @num_reg_defaults_raw: Number of elements in reg_defaults_raw. + * @use_hwlock: Indicate if a hardware spinlock should be used. + * @use_raw_spinlock: Indicate if a raw spinlock should be used. + * @hwlock_id: Specify the hardware spinlock id. + * @hwlock_mode: The hardware spinlock mode, should be HWLOCK_IRQSTATE, + * HWLOCK_IRQ or 0. * @reg_format_endian: Endianness for formatted register addresses. If this is - * DEFAULT, the @reg_format_endian_default value from the - * regmap bus is used. + * DEFAULT, the @reg_format_endian_default value from the + * regmap bus is used. * @val_format_endian: Endianness for formatted register values. If this is - * DEFAULT, the @reg_format_endian_default value from the - * regmap bus is used. + * DEFAULT, the @reg_format_endian_default value from the + * regmap bus is used. * * @ranges: Array of configuration entries for virtual address ranges. * @num_ranges: Number of range configuration entries. @@ -279,6 +406,8 @@ struct regmap_config { int reg_bits; int reg_stride; + int reg_shift; + unsigned int reg_base; int pad_bits; int val_bits; @@ -286,20 +415,38 @@ struct regmap_config { bool (*readable_reg)(struct device *dev, unsigned int reg); bool (*volatile_reg)(struct device *dev, unsigned int reg); bool (*precious_reg)(struct device *dev, unsigned int reg); - regmap_lock lock; - regmap_unlock unlock; - void *lock_arg; + bool (*writeable_noinc_reg)(struct device *dev, unsigned int reg); + bool (*readable_noinc_reg)(struct device *dev, unsigned int reg); int (*reg_read)(void *context, unsigned int reg, unsigned int *val); int (*reg_write)(void *context, unsigned int reg, unsigned int val); + int (*reg_update_bits)(void *context, unsigned int reg, + unsigned int mask, unsigned int val); + /* Bulk read/write */ + int (*read)(void *context, const void *reg_buf, size_t reg_size, + void *val_buf, size_t val_size); + int (*write)(void *context, const void *data, size_t count); + size_t max_raw_read; + size_t max_raw_write; + + bool can_sleep; bool fast_io; + bool io_port; + + bool disable_locking; + regmap_lock lock; + regmap_unlock unlock; + void *lock_arg; unsigned int max_register; + bool max_register_is_0; const struct regmap_access_table *wr_table; const struct regmap_access_table *rd_table; const struct regmap_access_table *volatile_table; const struct regmap_access_table *precious_table; + const struct regmap_access_table *wr_noinc_table; + const struct regmap_access_table *rd_noinc_table; const struct reg_default *reg_defaults; unsigned int num_reg_defaults; enum regcache_type cache_type; @@ -308,10 +455,18 @@ struct regmap_config { unsigned long read_flag_mask; unsigned long write_flag_mask; + bool zero_flag_mask; - bool use_single_rw; + bool use_single_read; + bool use_single_write; + bool use_relaxed_mmio; bool can_multi_write; + bool use_hwlock; + bool use_raw_spinlock; + unsigned int hwlock_id; + unsigned int hwlock_mode; + enum regmap_endian reg_format_endian; enum regmap_endian val_format_endian; @@ -329,8 +484,8 @@ struct regmap_config { * @range_max: Address of the highest register in virtual range. * * @selector_reg: Register with selector field. - * @selector_mask: Bit shift for selector value. - * @selector_shift: Bit mask for selector value. + * @selector_mask: Bit mask for selector value. + * @selector_shift: Bit shift for selector value. * * @window_start: Address of first (lowest) register in data window. * @window_len: Number of registers in data window. @@ -356,6 +511,32 @@ struct regmap_range_cfg { unsigned int window_len; }; +/** + * struct regmap_sdw_mbq_cfg - Configuration for Multi-Byte Quantities + * + * @mbq_size: Callback returning the actual size of the given register. + * @deferrable: Callback returning true if the hardware can defer + * transactions to the given register. Deferral should + * only be used by SDCA parts and typically which controls + * are deferrable will be specified in either as a hard + * coded list or from the DisCo tables in the platform + * firmware. + * + * @timeout_us: The time in microseconds after which waiting for a deferred + * transaction should time out. + * @retry_us: The time in microseconds between polls of the function busy + * status whilst waiting for an opportunity to retry a deferred + * transaction. + * + * Provides additional configuration required for SoundWire MBQ register maps. + */ +struct regmap_sdw_mbq_cfg { + int (*mbq_size)(struct device *dev, unsigned int reg); + bool (*deferrable)(struct device *dev, unsigned int reg); + unsigned long timeout_us; + unsigned long retry_us; +}; + struct regmap_async; typedef int (*regmap_hw_write)(void *context, const void *data, @@ -372,8 +553,12 @@ typedef int (*regmap_hw_read)(void *context, void *val_buf, size_t val_size); typedef int (*regmap_hw_reg_read)(void *context, unsigned int reg, unsigned int *val); +typedef int (*regmap_hw_reg_noinc_read)(void *context, unsigned int reg, + void *val, size_t val_count); typedef int (*regmap_hw_reg_write)(void *context, unsigned int reg, unsigned int val); +typedef int (*regmap_hw_reg_noinc_write)(void *context, unsigned int reg, + const void *val, size_t val_count); typedef int (*regmap_hw_reg_update_bits)(void *context, unsigned int reg, unsigned int mask, unsigned int val); typedef struct regmap_async *(*regmap_hw_async_alloc)(void); @@ -387,6 +572,7 @@ typedef void (*regmap_hw_free_context)(void *context); * to perform locking. This field is ignored if custom lock/unlock * functions are used (see fields lock/unlock of * struct regmap_config). + * @free_on_exit: kfree this on exit of regmap * @write: Write operation. * @gather_write: Write operation with split register/value, return -ENOTSUPP * if not implemented on a given device. @@ -394,6 +580,8 @@ typedef void (*regmap_hw_free_context)(void *context); * must serialise with respect to non-async I/O. * @reg_write: Write a single register value to the given register address. This * write operation has to complete when returning from the function. + * @reg_write_noinc: Write multiple register value to the same register. This + * write operation has to complete when returning from the function. * @reg_update_bits: Update bits operation to be used against volatile * registers, intended for devices supporting some mechanism * for setting clearing bits without having to @@ -416,13 +604,16 @@ typedef void (*regmap_hw_free_context)(void *context); */ struct regmap_bus { bool fast_io; + bool free_on_exit; regmap_hw_write write; regmap_hw_gather_write gather_write; regmap_hw_async_write async_write; regmap_hw_reg_write reg_write; + regmap_hw_reg_noinc_write reg_noinc_write; regmap_hw_reg_update_bits reg_update_bits; regmap_hw_read read; regmap_hw_reg_read reg_read; + regmap_hw_reg_noinc_read reg_noinc_read; regmap_hw_free_context free_context; regmap_hw_async_alloc async_alloc; u8 read_flag_mask; @@ -449,6 +640,18 @@ struct regmap *__regmap_init_i2c(struct i2c_client *i2c, const struct regmap_config *config, struct lock_class_key *lock_key, const char *lock_name); +struct regmap *__regmap_init_mdio(struct mdio_device *mdio_dev, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__regmap_init_sccb(struct i2c_client *i2c, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__regmap_init_slimbus(struct slim_device *slimbus, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); struct regmap *__regmap_init_spi(struct spi_device *dev, const struct regmap_config *config, struct lock_class_key *lock_key, @@ -474,6 +677,23 @@ struct regmap *__regmap_init_ac97(struct snd_ac97 *ac97, const struct regmap_config *config, struct lock_class_key *lock_key, const char *lock_name); +struct regmap *__regmap_init_sdw(struct sdw_slave *sdw, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__regmap_init_sdw_mbq(struct device *dev, struct sdw_slave *sdw, + const struct regmap_config *config, + const struct regmap_sdw_mbq_cfg *mbq_config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__regmap_init_spi_avmm(struct spi_device *spi, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__regmap_init_fsi(struct fsi_device *fsi_dev, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); struct regmap *__devm_regmap_init(struct device *dev, const struct regmap_bus *bus, @@ -485,6 +705,14 @@ struct regmap *__devm_regmap_init_i2c(struct i2c_client *i2c, const struct regmap_config *config, struct lock_class_key *lock_key, const char *lock_name); +struct regmap *__devm_regmap_init_mdio(struct mdio_device *mdio_dev, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__devm_regmap_init_sccb(struct i2c_client *i2c, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); struct regmap *__devm_regmap_init_spi(struct spi_device *dev, const struct regmap_config *config, struct lock_class_key *lock_key, @@ -511,6 +739,31 @@ struct regmap *__devm_regmap_init_ac97(struct snd_ac97 *ac97, const struct regmap_config *config, struct lock_class_key *lock_key, const char *lock_name); +struct regmap *__devm_regmap_init_sdw(struct sdw_slave *sdw, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__devm_regmap_init_sdw_mbq(struct device *dev, struct sdw_slave *sdw, + const struct regmap_config *config, + const struct regmap_sdw_mbq_cfg *mbq_config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__devm_regmap_init_slimbus(struct slim_device *slimbus, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__devm_regmap_init_i3c(struct i3c_device *i3c, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__devm_regmap_init_spi_avmm(struct spi_device *spi, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__devm_regmap_init_fsi(struct fsi_device *fsi_dev, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); /* * Wrapper for regmap_init macros to include a unique lockdep key and name @@ -566,6 +819,45 @@ int regmap_attach_dev(struct device *dev, struct regmap *map, i2c, config) /** + * regmap_init_mdio() - Initialise register map + * + * @mdio_dev: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer to + * a struct regmap. + */ +#define regmap_init_mdio(mdio_dev, config) \ + __regmap_lockdep_wrapper(__regmap_init_mdio, #config, \ + mdio_dev, config) + +/** + * regmap_init_sccb() - Initialise register map + * + * @i2c: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer to + * a struct regmap. + */ +#define regmap_init_sccb(i2c, config) \ + __regmap_lockdep_wrapper(__regmap_init_sccb, #config, \ + i2c, config) + +/** + * regmap_init_slimbus() - Initialise register map + * + * @slimbus: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer to + * a struct regmap. + */ +#define regmap_init_slimbus(slimbus, config) \ + __regmap_lockdep_wrapper(__regmap_init_slimbus, #config, \ + slimbus, config) + +/** * regmap_init_spi() - Initialise register map * * @dev: Device that will be interacted with @@ -626,7 +918,7 @@ int regmap_attach_dev(struct device *dev, struct regmap *map, * @config: Configuration for register map * * The return value will be an ERR_PTR() on error or a valid pointer to - * a struct regmap. + * a struct regmap. Implies 'fast_io'. */ #define regmap_init_mmio_clk(dev, clk_id, regs, config) \ __regmap_lockdep_wrapper(__regmap_init_mmio_clk, #config, \ @@ -640,7 +932,7 @@ int regmap_attach_dev(struct device *dev, struct regmap *map, * @config: Configuration for register map * * The return value will be an ERR_PTR() on error or a valid pointer to - * a struct regmap. + * a struct regmap. Implies 'fast_io'. */ #define regmap_init_mmio(dev, regs, config) \ regmap_init_mmio_clk(dev, NULL, regs, config) @@ -660,6 +952,74 @@ int regmap_attach_dev(struct device *dev, struct regmap *map, bool regmap_ac97_default_volatile(struct device *dev, unsigned int reg); /** + * regmap_init_sdw() - Initialise register map + * + * @sdw: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer to + * a struct regmap. + */ +#define regmap_init_sdw(sdw, config) \ + __regmap_lockdep_wrapper(__regmap_init_sdw, #config, \ + sdw, config) + +/** + * regmap_init_sdw_mbq() - Initialise register map + * + * @sdw: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer to + * a struct regmap. + */ +#define regmap_init_sdw_mbq(sdw, config) \ + __regmap_lockdep_wrapper(__regmap_init_sdw_mbq, #config, \ + &sdw->dev, sdw, config, NULL) + +/** + * regmap_init_sdw_mbq_cfg() - Initialise MBQ SDW register map with config + * + * @sdw: Device that will be interacted with + * @config: Configuration for register map + * @mbq_config: Properties for the MBQ registers + * + * The return value will be an ERR_PTR() on error or a valid pointer + * to a struct regmap. The regmap will be automatically freed by the + * device management code. + */ +#define regmap_init_sdw_mbq_cfg(dev, sdw, config, mbq_config) \ + __regmap_lockdep_wrapper(__regmap_init_sdw_mbq, #config, \ + dev, sdw, config, mbq_config) + +/** + * regmap_init_spi_avmm() - Initialize register map for Intel SPI Slave + * to AVMM Bus Bridge + * + * @spi: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer + * to a struct regmap. + */ +#define regmap_init_spi_avmm(spi, config) \ + __regmap_lockdep_wrapper(__regmap_init_spi_avmm, #config, \ + spi, config) + +/** + * regmap_init_fsi() - Initialise register map + * + * @fsi_dev: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer to + * a struct regmap. + */ +#define regmap_init_fsi(fsi_dev, config) \ + __regmap_lockdep_wrapper(__regmap_init_fsi, #config, fsi_dev, \ + config) + +/** * devm_regmap_init() - Initialise managed register map * * @dev: Device that will be interacted with @@ -691,6 +1051,34 @@ bool regmap_ac97_default_volatile(struct device *dev, unsigned int reg); i2c, config) /** + * devm_regmap_init_mdio() - Initialise managed register map + * + * @mdio_dev: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer + * to a struct regmap. The regmap will be automatically freed by the + * device management code. + */ +#define devm_regmap_init_mdio(mdio_dev, config) \ + __regmap_lockdep_wrapper(__devm_regmap_init_mdio, #config, \ + mdio_dev, config) + +/** + * devm_regmap_init_sccb() - Initialise managed register map + * + * @i2c: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer + * to a struct regmap. The regmap will be automatically freed by the + * device management code. + */ +#define devm_regmap_init_sccb(i2c, config) \ + __regmap_lockdep_wrapper(__devm_regmap_init_sccb, #config, \ + i2c, config) + +/** * devm_regmap_init_spi() - Initialise register map * * @dev: Device that will be interacted with @@ -755,7 +1143,7 @@ bool regmap_ac97_default_volatile(struct device *dev, unsigned int reg); * * The return value will be an ERR_PTR() on error or a valid pointer * to a struct regmap. The regmap will be automatically freed by the - * device management code. + * device management code. Implies 'fast_io'. */ #define devm_regmap_init_mmio_clk(dev, clk_id, regs, config) \ __regmap_lockdep_wrapper(__devm_regmap_init_mmio_clk, #config, \ @@ -770,7 +1158,7 @@ bool regmap_ac97_default_volatile(struct device *dev, unsigned int reg); * * The return value will be an ERR_PTR() on error or a valid pointer * to a struct regmap. The regmap will be automatically freed by the - * device management code. + * device management code. Implies 'fast_io'. */ #define devm_regmap_init_mmio(dev, regs, config) \ devm_regmap_init_mmio_clk(dev, NULL, regs, config) @@ -789,6 +1177,109 @@ bool regmap_ac97_default_volatile(struct device *dev, unsigned int reg); __regmap_lockdep_wrapper(__devm_regmap_init_ac97, #config, \ ac97, config) +/** + * devm_regmap_init_sdw() - Initialise managed register map + * + * @sdw: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer + * to a struct regmap. The regmap will be automatically freed by the + * device management code. + */ +#define devm_regmap_init_sdw(sdw, config) \ + __regmap_lockdep_wrapper(__devm_regmap_init_sdw, #config, \ + sdw, config) + +/** + * devm_regmap_init_sdw_mbq() - Initialise managed register map + * + * @sdw: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer + * to a struct regmap. The regmap will be automatically freed by the + * device management code. + */ +#define devm_regmap_init_sdw_mbq(sdw, config) \ + __regmap_lockdep_wrapper(__devm_regmap_init_sdw_mbq, #config, \ + &sdw->dev, sdw, config, NULL) + +/** + * devm_regmap_init_sdw_mbq_cfg() - Initialise managed MBQ SDW register map with config + * + * @dev: Device that will be interacted with + * @sdw: SoundWire Device that will be interacted with + * @config: Configuration for register map + * @mbq_config: Properties for the MBQ registers + * + * The return value will be an ERR_PTR() on error or a valid pointer + * to a struct regmap. The regmap will be automatically freed by the + * device management code. + */ +#define devm_regmap_init_sdw_mbq_cfg(dev, sdw, config, mbq_config) \ + __regmap_lockdep_wrapper(__devm_regmap_init_sdw_mbq, \ + #config, dev, sdw, config, mbq_config) + +/** + * devm_regmap_init_slimbus() - Initialise managed register map + * + * @slimbus: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer + * to a struct regmap. The regmap will be automatically freed by the + * device management code. + */ +#define devm_regmap_init_slimbus(slimbus, config) \ + __regmap_lockdep_wrapper(__devm_regmap_init_slimbus, #config, \ + slimbus, config) + +/** + * devm_regmap_init_i3c() - Initialise managed register map + * + * @i3c: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer + * to a struct regmap. The regmap will be automatically freed by the + * device management code. + */ +#define devm_regmap_init_i3c(i3c, config) \ + __regmap_lockdep_wrapper(__devm_regmap_init_i3c, #config, \ + i3c, config) + +/** + * devm_regmap_init_spi_avmm() - Initialize register map for Intel SPI Slave + * to AVMM Bus Bridge + * + * @spi: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer + * to a struct regmap. The map will be automatically freed by the + * device management code. + */ +#define devm_regmap_init_spi_avmm(spi, config) \ + __regmap_lockdep_wrapper(__devm_regmap_init_spi_avmm, #config, \ + spi, config) + +/** + * devm_regmap_init_fsi() - Initialise managed register map + * + * @fsi_dev: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer + * to a struct regmap. The regmap will be automatically freed by the + * device management code. + */ +#define devm_regmap_init_fsi(fsi_dev, config) \ + __regmap_lockdep_wrapper(__devm_regmap_init_fsi, #config, \ + fsi_dev, config) + +int regmap_mmio_attach_clk(struct regmap *map, struct clk *clk); +void regmap_mmio_detach_clk(struct regmap *map); void regmap_exit(struct regmap *map); int regmap_reinit_cache(struct regmap *map, const struct regmap_config *config); @@ -798,6 +1289,8 @@ int regmap_write(struct regmap *map, unsigned int reg, unsigned int val); int regmap_write_async(struct regmap *map, unsigned int reg, unsigned int val); int regmap_raw_write(struct regmap *map, unsigned int reg, const void *val, size_t val_len); +int regmap_noinc_write(struct regmap *map, unsigned int reg, + const void *val, size_t val_len); int regmap_bulk_write(struct regmap *map, unsigned int reg, const void *val, size_t val_count); int regmap_multi_reg_write(struct regmap *map, const struct reg_sequence *regs, @@ -808,21 +1301,64 @@ int regmap_multi_reg_write_bypassed(struct regmap *map, int regmap_raw_write_async(struct regmap *map, unsigned int reg, const void *val, size_t val_len); int regmap_read(struct regmap *map, unsigned int reg, unsigned int *val); +int regmap_read_bypassed(struct regmap *map, unsigned int reg, unsigned int *val); int regmap_raw_read(struct regmap *map, unsigned int reg, void *val, size_t val_len); +int regmap_noinc_read(struct regmap *map, unsigned int reg, + void *val, size_t val_len); int regmap_bulk_read(struct regmap *map, unsigned int reg, void *val, size_t val_count); +int regmap_multi_reg_read(struct regmap *map, const unsigned int *reg, void *val, + size_t val_count); int regmap_update_bits_base(struct regmap *map, unsigned int reg, unsigned int mask, unsigned int val, bool *change, bool async, bool force); + +static inline int regmap_update_bits(struct regmap *map, unsigned int reg, + unsigned int mask, unsigned int val) +{ + return regmap_update_bits_base(map, reg, mask, val, NULL, false, false); +} + +static inline int regmap_update_bits_async(struct regmap *map, unsigned int reg, + unsigned int mask, unsigned int val) +{ + return regmap_update_bits_base(map, reg, mask, val, NULL, true, false); +} + +static inline int regmap_update_bits_check(struct regmap *map, unsigned int reg, + unsigned int mask, unsigned int val, + bool *change) +{ + return regmap_update_bits_base(map, reg, mask, val, + change, false, false); +} + +static inline int +regmap_update_bits_check_async(struct regmap *map, unsigned int reg, + unsigned int mask, unsigned int val, + bool *change) +{ + return regmap_update_bits_base(map, reg, mask, val, + change, true, false); +} + +static inline int regmap_write_bits(struct regmap *map, unsigned int reg, + unsigned int mask, unsigned int val) +{ + return regmap_update_bits_base(map, reg, mask, val, NULL, false, true); +} + int regmap_get_val_bytes(struct regmap *map); int regmap_get_max_register(struct regmap *map); int regmap_get_reg_stride(struct regmap *map); +bool regmap_might_sleep(struct regmap *map); int regmap_async_complete(struct regmap *map); bool regmap_can_raw_write(struct regmap *map); size_t regmap_get_raw_read_max(struct regmap *map); size_t regmap_get_raw_write_max(struct regmap *map); +void regcache_sort_defaults(struct reg_default *defaults, unsigned int ndefaults); int regcache_sync(struct regmap *map); int regcache_sync_region(struct regmap *map, unsigned int min, unsigned int max); @@ -831,6 +1367,7 @@ int regcache_drop_region(struct regmap *map, unsigned int min, void regcache_cache_only(struct regmap *map, bool enable); void regcache_cache_bypass(struct regmap *map, bool enable); void regcache_mark_dirty(struct regmap *map); +bool regcache_reg_cached(struct regmap *map, unsigned int reg); bool regmap_check_range_table(struct regmap *map, unsigned int reg, const struct regmap_access_table *table); @@ -850,6 +1387,30 @@ bool regmap_reg_in_ranges(unsigned int reg, const struct regmap_range *ranges, unsigned int nranges); +static inline int regmap_set_bits(struct regmap *map, + unsigned int reg, unsigned int bits) +{ + return regmap_update_bits_base(map, reg, bits, bits, + NULL, false, false); +} + +static inline int regmap_clear_bits(struct regmap *map, + unsigned int reg, unsigned int bits) +{ + return regmap_update_bits_base(map, reg, bits, 0, NULL, false, false); +} + +static inline int regmap_assign_bits(struct regmap *map, unsigned int reg, + unsigned int bits, bool value) +{ + if (value) + return regmap_set_bits(map, reg, bits); + else + return regmap_clear_bits(map, reg, bits); +} + +int regmap_test_bits(struct regmap *map, unsigned int reg, unsigned int bits); + /** * struct reg_field - Description of an register field * @@ -873,6 +1434,14 @@ struct reg_field { .msb = _msb, \ } +#define REG_FIELD_ID(_reg, _lsb, _msb, _size, _offset) { \ + .reg = _reg, \ + .lsb = _lsb, \ + .msb = _msb, \ + .id_size = _size, \ + .id_offset = _offset, \ + } + struct regmap_field *regmap_field_alloc(struct regmap *regmap, struct reg_field reg_field); void regmap_field_free(struct regmap_field *field); @@ -881,6 +1450,18 @@ struct regmap_field *devm_regmap_field_alloc(struct device *dev, struct regmap *regmap, struct reg_field reg_field); void devm_regmap_field_free(struct device *dev, struct regmap_field *field); +int regmap_field_bulk_alloc(struct regmap *regmap, + struct regmap_field **rm_field, + const struct reg_field *reg_field, + int num_fields); +void regmap_field_bulk_free(struct regmap_field *field); +int devm_regmap_field_bulk_alloc(struct device *dev, struct regmap *regmap, + struct regmap_field **field, + const struct reg_field *reg_field, + int num_fields); +void devm_regmap_field_bulk_free(struct device *dev, + struct regmap_field *field); + int regmap_field_read(struct regmap_field *field, unsigned int *val); int regmap_field_update_bits_base(struct regmap_field *field, unsigned int mask, unsigned int val, @@ -891,60 +1472,217 @@ int regmap_fields_update_bits_base(struct regmap_field *field, unsigned int id, unsigned int mask, unsigned int val, bool *change, bool async, bool force); +static inline int regmap_field_write(struct regmap_field *field, + unsigned int val) +{ + return regmap_field_update_bits_base(field, ~0, val, + NULL, false, false); +} + +static inline int regmap_field_force_write(struct regmap_field *field, + unsigned int val) +{ + return regmap_field_update_bits_base(field, ~0, val, NULL, false, true); +} + +static inline int regmap_field_update_bits(struct regmap_field *field, + unsigned int mask, unsigned int val) +{ + return regmap_field_update_bits_base(field, mask, val, + NULL, false, false); +} + +static inline int regmap_field_set_bits(struct regmap_field *field, + unsigned int bits) +{ + return regmap_field_update_bits_base(field, bits, bits, NULL, false, + false); +} + +static inline int regmap_field_clear_bits(struct regmap_field *field, + unsigned int bits) +{ + return regmap_field_update_bits_base(field, bits, 0, NULL, false, + false); +} + +int regmap_field_test_bits(struct regmap_field *field, unsigned int bits); + +static inline int +regmap_field_force_update_bits(struct regmap_field *field, + unsigned int mask, unsigned int val) +{ + return regmap_field_update_bits_base(field, mask, val, + NULL, false, true); +} + +static inline int regmap_fields_write(struct regmap_field *field, + unsigned int id, unsigned int val) +{ + return regmap_fields_update_bits_base(field, id, ~0, val, + NULL, false, false); +} + +static inline int regmap_fields_force_write(struct regmap_field *field, + unsigned int id, unsigned int val) +{ + return regmap_fields_update_bits_base(field, id, ~0, val, + NULL, false, true); +} + +static inline int +regmap_fields_update_bits(struct regmap_field *field, unsigned int id, + unsigned int mask, unsigned int val) +{ + return regmap_fields_update_bits_base(field, id, mask, val, + NULL, false, false); +} + +static inline int +regmap_fields_force_update_bits(struct regmap_field *field, unsigned int id, + unsigned int mask, unsigned int val) +{ + return regmap_fields_update_bits_base(field, id, mask, val, + NULL, false, true); +} + +/** + * struct regmap_irq_type - IRQ type definitions. + * + * @type_reg_offset: Offset register for the irq type setting. + * @type_rising_val: Register value to configure RISING type irq. + * @type_falling_val: Register value to configure FALLING type irq. + * @type_level_low_val: Register value to configure LEVEL_LOW type irq. + * @type_level_high_val: Register value to configure LEVEL_HIGH type irq. + * @types_supported: logical OR of IRQ_TYPE_* flags indicating supported types. + */ +struct regmap_irq_type { + unsigned int type_reg_offset; + unsigned int type_reg_mask; + unsigned int type_rising_val; + unsigned int type_falling_val; + unsigned int type_level_low_val; + unsigned int type_level_high_val; + unsigned int types_supported; +}; + /** * struct regmap_irq - Description of an IRQ for the generic regmap irq_chip. * * @reg_offset: Offset of the status/mask register within the bank * @mask: Mask used to flag/control the register. - * @type_reg_offset: Offset register for the irq type setting. - * @type_rising_mask: Mask bit to configure RISING type irq. - * @type_falling_mask: Mask bit to configure FALLING type irq. + * @type: IRQ trigger type setting details if supported. */ struct regmap_irq { unsigned int reg_offset; unsigned int mask; - unsigned int type_reg_offset; - unsigned int type_rising_mask; - unsigned int type_falling_mask; + struct regmap_irq_type type; }; #define REGMAP_IRQ_REG(_irq, _off, _mask) \ [_irq] = { .reg_offset = (_off), .mask = (_mask) } +#define REGMAP_IRQ_REG_LINE(_id, _reg_bits) \ + [_id] = { \ + .mask = BIT((_id) % (_reg_bits)), \ + .reg_offset = (_id) / (_reg_bits), \ + } + +#define REGMAP_IRQ_MAIN_REG_OFFSET(arr) \ + { .num_regs = ARRAY_SIZE((arr)), .offset = &(arr)[0] } + +struct regmap_irq_sub_irq_map { + unsigned int num_regs; + unsigned int *offset; +}; + +struct regmap_irq_chip_data; + /** * struct regmap_irq_chip - Description of a generic regmap irq_chip. * * @name: Descriptive name for IRQ controller. + * @domain_suffix: Name suffix to be appended to end of IRQ domain name. Needed + * when multiple regmap-IRQ controllers are created from same + * device. + * + * @main_status: Base main status register address. For chips which have + * interrupts arranged in separate sub-irq blocks with own IRQ + * registers and which have a main IRQ registers indicating + * sub-irq blocks with unhandled interrupts. For such chips fill + * sub-irq register information in status_base, mask_base and + * ack_base. + * @num_main_status_bits: Should be given to chips where number of meaningfull + * main status bits differs from num_regs. + * @sub_reg_offsets: arrays of mappings from main register bits to sub irq + * registers. First item in array describes the registers + * for first main status bit. Second array for second bit etc. + * Offset is given as sub register status offset to + * status_base. Should contain num_regs arrays. + * Can be provided for chips with more complex mapping than + * 1.st bit to 1.st sub-reg, 2.nd bit to 2.nd sub-reg, ... + * @num_main_regs: Number of 'main status' irq registers for chips which have + * main_status set. * * @status_base: Base status register address. - * @mask_base: Base mask register address. - * @mask_writeonly: Base mask register is write only. - * @unmask_base: Base unmask register address. for chips who have - * separate mask and unmask registers + * @mask_base: Base mask register address. Mask bits are set to 1 when an + * interrupt is masked, 0 when unmasked. + * @unmask_base: Base unmask register address. Unmask bits are set to 1 when + * an interrupt is unmasked and 0 when masked. * @ack_base: Base ack address. If zero then the chip is clear on read. * Using zero value is possible with @use_ack bit. * @wake_base: Base address for wake enables. If zero unsupported. - * @type_base: Base address for irq type. If zero unsupported. + * @config_base: Base address for IRQ type config regs. If null unsupported. * @irq_reg_stride: Stride to use for chips where registers are not contiguous. * @init_ack_masked: Ack all masked interrupts once during initalization. - * @mask_invert: Inverted mask register: cleared bits are masked out. + * @mask_unmask_non_inverted: Controls mask bit inversion for chips that set + * both @mask_base and @unmask_base. If false, mask and unmask bits are + * inverted (which is deprecated behavior); if true, bits will not be + * inverted and the registers keep their normal behavior. Note that if + * you use only one of @mask_base or @unmask_base, this flag has no + * effect and is unnecessary. Any new drivers that set both @mask_base + * and @unmask_base should set this to true to avoid relying on the + * deprecated behavior. * @use_ack: Use @ack register even if it is zero. * @ack_invert: Inverted ack register: cleared bits for ack. - * @wake_invert: Inverted wake register: cleared bits are wake enabled. - * @type_invert: Invert the type flags. + * @clear_ack: Use this to set 1 and 0 or vice-versa to clear interrupts. + * @status_invert: Inverted status register: cleared bits are active interrupts. + * @status_is_level: Status register is actuall signal level: Xor status + * register with previous value to get active interrupts. + * @wake_invert: Inverted wake register: cleared bits are wake disabled. + * @type_in_mask: Use the mask registers for controlling irq type. Use this if + * the hardware provides separate bits for rising/falling edge + * or low/high level interrupts and they should be combined into + * a single logical interrupt. Use &struct regmap_irq_type data + * to define the mask bit for each irq type. + * @clear_on_unmask: For chips with interrupts cleared on read: read the status + * registers before unmasking interrupts to clear any bits + * set when they were masked. * @runtime_pm: Hold a runtime PM lock on the device when accessing it. + * @no_status: No status register: all interrupts assumed generated by device. * * @num_regs: Number of registers in each control bank. + * * @irqs: Descriptors for individual IRQs. Interrupt numbers are * assigned based on the index in the array of the interrupt. * @num_irqs: Number of descriptors. - * @num_type_reg: Number of type registers. - * @type_reg_stride: Stride to use for chips where type registers are not - * contiguous. + * @num_config_bases: Number of config base registers. + * @num_config_regs: Number of config registers for each config base register. + * * @handle_pre_irq: Driver specific callback to handle interrupt from device * before regmap_irq_handler process the interrupts. * @handle_post_irq: Driver specific callback to handle interrupt from device * after handling the interrupts in regmap_irq_handler(). + * @handle_mask_sync: Callback used to handle IRQ mask syncs. The index will be + * in the range [0, num_regs) + * @set_type_config: Callback used for configuring irq types. + * @get_irq_reg: Callback for mapping (base register, index) pairs to register + * addresses. The base register will be one of @status_base, + * @mask_base, etc., @main_status, or any of @config_base. + * The index will be in the range [0, num_main_regs[ for the + * main status base, [0, num_config_regs[ for any config + * register base, and [0, num_regs[ for any other base. + * If unspecified then regmap_irq_get_irq_reg_linear() is used. * @irq_drv_data: Driver specific IRQ data which is passed as parameter when * driver specific pre/post interrupt handler is called. * @@ -954,47 +1692,79 @@ struct regmap_irq { */ struct regmap_irq_chip { const char *name; + const char *domain_suffix; + + unsigned int main_status; + unsigned int num_main_status_bits; + const struct regmap_irq_sub_irq_map *sub_reg_offsets; + int num_main_regs; unsigned int status_base; unsigned int mask_base; unsigned int unmask_base; unsigned int ack_base; unsigned int wake_base; - unsigned int type_base; + const unsigned int *config_base; unsigned int irq_reg_stride; - bool mask_writeonly:1; - bool init_ack_masked:1; - bool mask_invert:1; - bool use_ack:1; - bool ack_invert:1; - bool wake_invert:1; - bool runtime_pm:1; - bool type_invert:1; + unsigned int init_ack_masked:1; + unsigned int mask_unmask_non_inverted:1; + unsigned int use_ack:1; + unsigned int ack_invert:1; + unsigned int clear_ack:1; + unsigned int status_invert:1; + unsigned int status_is_level:1; + unsigned int wake_invert:1; + unsigned int type_in_mask:1; + unsigned int clear_on_unmask:1; + unsigned int runtime_pm:1; + unsigned int no_status:1; int num_regs; const struct regmap_irq *irqs; int num_irqs; - int num_type_reg; - unsigned int type_reg_stride; + int num_config_bases; + int num_config_regs; int (*handle_pre_irq)(void *irq_drv_data); int (*handle_post_irq)(void *irq_drv_data); + int (*handle_mask_sync)(int index, unsigned int mask_buf_def, + unsigned int mask_buf, void *irq_drv_data); + int (*set_type_config)(unsigned int **buf, unsigned int type, + const struct regmap_irq *irq_data, int idx, + void *irq_drv_data); + unsigned int (*get_irq_reg)(struct regmap_irq_chip_data *data, + unsigned int base, int index); void *irq_drv_data; }; -struct regmap_irq_chip_data; +unsigned int regmap_irq_get_irq_reg_linear(struct regmap_irq_chip_data *data, + unsigned int base, int index); +int regmap_irq_set_type_config_simple(unsigned int **buf, unsigned int type, + const struct regmap_irq *irq_data, + int idx, void *irq_drv_data); int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags, int irq_base, const struct regmap_irq_chip *chip, struct regmap_irq_chip_data **data); +int regmap_add_irq_chip_fwnode(struct fwnode_handle *fwnode, + struct regmap *map, int irq, + int irq_flags, int irq_base, + const struct regmap_irq_chip *chip, + struct regmap_irq_chip_data **data); void regmap_del_irq_chip(int irq, struct regmap_irq_chip_data *data); int devm_regmap_add_irq_chip(struct device *dev, struct regmap *map, int irq, int irq_flags, int irq_base, const struct regmap_irq_chip *chip, struct regmap_irq_chip_data **data); +int devm_regmap_add_irq_chip_fwnode(struct device *dev, + struct fwnode_handle *fwnode, + struct regmap *map, int irq, + int irq_flags, int irq_base, + const struct regmap_irq_chip *chip, + struct regmap_irq_chip_data **data); void devm_regmap_del_irq_chip(struct device *dev, int irq, struct regmap_irq_chip_data *data); @@ -1039,6 +1809,13 @@ static inline int regmap_raw_write_async(struct regmap *map, unsigned int reg, return -EINVAL; } +static inline int regmap_noinc_write(struct regmap *map, unsigned int reg, + const void *val, size_t val_len) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + static inline int regmap_bulk_write(struct regmap *map, unsigned int reg, const void *val, size_t val_count) { @@ -1053,6 +1830,13 @@ static inline int regmap_read(struct regmap *map, unsigned int reg, return -EINVAL; } +static inline int regmap_read_bypassed(struct regmap *map, unsigned int reg, + unsigned int *val) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + static inline int regmap_raw_read(struct regmap *map, unsigned int reg, void *val, size_t val_len) { @@ -1060,6 +1844,13 @@ static inline int regmap_raw_read(struct regmap *map, unsigned int reg, return -EINVAL; } +static inline int regmap_noinc_read(struct regmap *map, unsigned int reg, + void *val, size_t val_len) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + static inline int regmap_bulk_read(struct regmap *map, unsigned int reg, void *val, size_t val_count) { @@ -1075,6 +1866,34 @@ static inline int regmap_update_bits_base(struct regmap *map, unsigned int reg, return -EINVAL; } +static inline int regmap_set_bits(struct regmap *map, + unsigned int reg, unsigned int bits) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_clear_bits(struct regmap *map, + unsigned int reg, unsigned int bits) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_assign_bits(struct regmap *map, unsigned int reg, + unsigned int bits, bool value) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_test_bits(struct regmap *map, + unsigned int reg, unsigned int bits) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + static inline int regmap_field_update_bits_base(struct regmap_field *field, unsigned int mask, unsigned int val, bool *change, bool async, bool force) @@ -1092,6 +1911,124 @@ static inline int regmap_fields_update_bits_base(struct regmap_field *field, return -EINVAL; } +static inline int regmap_update_bits(struct regmap *map, unsigned int reg, + unsigned int mask, unsigned int val) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_update_bits_async(struct regmap *map, unsigned int reg, + unsigned int mask, unsigned int val) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_update_bits_check(struct regmap *map, unsigned int reg, + unsigned int mask, unsigned int val, + bool *change) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int +regmap_update_bits_check_async(struct regmap *map, unsigned int reg, + unsigned int mask, unsigned int val, + bool *change) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_write_bits(struct regmap *map, unsigned int reg, + unsigned int mask, unsigned int val) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_field_write(struct regmap_field *field, + unsigned int val) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_field_force_write(struct regmap_field *field, + unsigned int val) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_field_update_bits(struct regmap_field *field, + unsigned int mask, unsigned int val) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int +regmap_field_force_update_bits(struct regmap_field *field, + unsigned int mask, unsigned int val) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_field_set_bits(struct regmap_field *field, + unsigned int bits) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_field_clear_bits(struct regmap_field *field, + unsigned int bits) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_field_test_bits(struct regmap_field *field, + unsigned int bits) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_fields_write(struct regmap_field *field, + unsigned int id, unsigned int val) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_fields_force_write(struct regmap_field *field, + unsigned int id, unsigned int val) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int +regmap_fields_update_bits(struct regmap_field *field, unsigned int id, + unsigned int mask, unsigned int val) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int +regmap_fields_force_update_bits(struct regmap_field *field, unsigned int id, + unsigned int mask, unsigned int val) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + static inline int regmap_get_val_bytes(struct regmap *map) { WARN_ONCE(1, "regmap API is disabled"); @@ -1110,6 +2047,18 @@ static inline int regmap_get_reg_stride(struct regmap *map) return -EINVAL; } +static inline bool regmap_might_sleep(struct regmap *map) +{ + WARN_ONCE(1, "regmap API is disabled"); + return true; +} + +static inline void regcache_sort_defaults(struct reg_default *defaults, + unsigned int ndefaults) +{ + WARN_ONCE(1, "regmap API is disabled"); +} + static inline int regcache_sync(struct regmap *map) { WARN_ONCE(1, "regmap API is disabled"); |