diff options
Diffstat (limited to 'include/linux/regmap.h')
| -rw-r--r-- | include/linux/regmap.h | 323 |
1 files changed, 214 insertions, 109 deletions
diff --git a/include/linux/regmap.h b/include/linux/regmap.h index a3bc695bcca0..b0b9be750d93 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -38,12 +38,40 @@ struct regmap_field; struct snd_ac97; struct sdw_slave; -/* An enum of all the supported cache types */ +/* + * regmap_mdio address encoding. IEEE 802.3ae clause 45 addresses consist of a + * device address and a register address. + */ +#define REGMAP_MDIO_C45_DEVAD_SHIFT 16 +#define REGMAP_MDIO_C45_DEVAD_MASK GENMASK(20, 16) +#define REGMAP_MDIO_C45_REGNUM_MASK GENMASK(15, 0) + +/* + * regmap.reg_shift indicates by how much we must shift registers prior to + * performing any operation. It's a signed value, positive numbers means + * downshifting the register's address, while negative numbers means upshifting. + */ +#define REGMAP_UPSHIFT(s) (-(s)) +#define REGMAP_DOWNSHIFT(s) (s) + +/* + * The supported cache types, the default is no cache. Any new caches should + * usually use the maple tree cache unless they specifically require that there + * are never any allocations at runtime in which case they should use the sparse + * flat cache. The rbtree cache *may* have some performance advantage for very + * low end systems that make heavy use of cache syncs but is mainly legacy. + * These caches are sparse and entries will be initialized from hardware if no + * default has been provided. + * The non-sparse flat cache is provided for compatibility with existing users + * and will zero-initialize cache entries for which no defaults are provided. + * New users should use the sparse flat cache. + */ enum regcache_type { REGCACHE_NONE, REGCACHE_RBTREE, - REGCACHE_COMPRESSED, REGCACHE_FLAT, + REGCACHE_MAPLE, + REGCACHE_FLAT_S, }; /** @@ -90,17 +118,17 @@ struct reg_sequence { * @addr: Address to poll * @val: Unsigned integer variable to read the value into * @cond: Break condition (usually involving @val) - * @sleep_us: Maximum time to sleep between reads in us (0 - * tight-loops). Should be less than ~20ms since usleep_range - * is used (see Documentation/timers/timers-howto.rst). + * @sleep_us: Maximum time to sleep between reads in us (0 tight-loops). Please + * read usleep_range() function description for details and + * limitations. * @timeout_us: Timeout in us, 0 means never timeout * - * Returns 0 on success and -ETIMEDOUT upon a timeout or the regmap_read + * This is modelled after the readx_poll_timeout macros in linux/iopoll.h. + * + * Returns: 0 on success and -ETIMEDOUT upon a timeout or the regmap_read * error return value in case of a error read. In the two former cases, * the last read value at @addr is stored in @val. Must not be called * from atomic context if sleep_us or timeout_us are used. - * - * This is modelled after the readx_poll_timeout macros in linux/iopoll.h. */ #define regmap_read_poll_timeout(map, addr, val, cond, sleep_us, timeout_us) \ ({ \ @@ -117,20 +145,20 @@ struct reg_sequence { * @addr: Address to poll * @val: Unsigned integer variable to read the value into * @cond: Break condition (usually involving @val) - * @delay_us: Time to udelay between reads in us (0 tight-loops). - * Should be less than ~10us since udelay is used - * (see Documentation/timers/timers-howto.rst). + * @delay_us: Time to udelay between reads in us (0 tight-loops). Please + * read udelay() function description for details and + * limitations. * @timeout_us: Timeout in us, 0 means never timeout * - * Returns 0 on success and -ETIMEDOUT upon a timeout or the regmap_read - * error return value in case of a error read. In the two former cases, - * the last read value at @addr is stored in @val. - * * This is modelled after the readx_poll_timeout_atomic macros in linux/iopoll.h. * * Note: In general regmap cannot be used in atomic context. If you want to use * this macro then first setup your regmap for atomic use (flat or no cache * and MMIO regmap). + * + * Returns: 0 on success and -ETIMEDOUT upon a timeout or the regmap_read + * error return value in case of a error read. In the two former cases, + * the last read value at @addr is stored in @val. */ #define regmap_read_poll_timeout_atomic(map, addr, val, cond, delay_us, timeout_us) \ ({ \ @@ -161,17 +189,17 @@ struct reg_sequence { * @field: Regmap field to read from * @val: Unsigned integer variable to read the value into * @cond: Break condition (usually involving @val) - * @sleep_us: Maximum time to sleep between reads in us (0 - * tight-loops). Should be less than ~20ms since usleep_range - * is used (see Documentation/timers/timers-howto.rst). + * @sleep_us: Maximum time to sleep between reads in us (0 tight-loops). Please + * read usleep_range() function description for details and + * limitations. * @timeout_us: Timeout in us, 0 means never timeout * - * Returns 0 on success and -ETIMEDOUT upon a timeout or the regmap_field_read + * This is modelled after the readx_poll_timeout macros in linux/iopoll.h. + * + * Returns: 0 on success and -ETIMEDOUT upon a timeout or the regmap_field_read * error return value in case of a error read. In the two former cases, * the last read value at @addr is stored in @val. Must not be called * from atomic context if sleep_us or timeout_us are used. - * - * This is modelled after the readx_poll_timeout macros in linux/iopoll.h. */ #define regmap_field_read_poll_timeout(field, val, cond, sleep_us, timeout_us) \ ({ \ @@ -238,8 +266,9 @@ typedef void (*regmap_unlock)(void *); * @reg_stride: The register address stride. Valid register addresses are a * multiple of this value. If set to 0, a value of 1 will be * used. - * @reg_downshift: The number of bits to downshift the register before - * performing any operations. + * @reg_shift: The number of bits to shift the register before performing any + * operations. Any positive number will be downshifted, and negative + * values will be upshifted * @reg_base: Value to be added to every register address before performing any * operation. * @pad_bits: Number of bits of padding between register and value. @@ -280,15 +309,6 @@ typedef void (*regmap_unlock)(void *); * performed on such table (a register is no increment * readable if it belongs to one of the ranges specified * by rd_noinc_table). - * @disable_locking: This regmap is either protected by external means or - * is guaranteed not to be accessed from multiple threads. - * Don't use any locking mechanisms. - * @lock: Optional lock callback (overrides regmap's default lock - * function, based on spinlock or mutex). - * @unlock: As above for unlocking. - * @lock_arg: this field is passed as the only argument of lock/unlock - * functions (ignored in case regular lock/unlock functions - * are not overridden). * @reg_read: Optional callback that if filled will be used to perform * all the reads from the registers. Should only be provided for * devices whose read operation cannot be represented as a simple @@ -306,6 +326,7 @@ typedef void (*regmap_unlock)(void *); * @write: Same as above for writing. * @max_raw_read: Max raw read size that can be used on the device. * @max_raw_write: Max raw write size that can be used on the device. + * @can_sleep: Optional, specifies whether regmap operations can sleep. * @fast_io: Register IO is fast. Use a spinlock instead of a mutex * to perform locking. This field is ignored if custom lock/unlock * functions are used (see fields lock/unlock of struct regmap_config). @@ -314,7 +335,20 @@ typedef void (*regmap_unlock)(void *); * Use it only for "no-bus" cases. * @io_port: Support IO port accessors. Makes sense only when MMIO vs. IO port * access can be distinguished. + * @disable_locking: This regmap is either protected by external means or + * is guaranteed not to be accessed from multiple threads. + * Don't use any locking mechanisms. + * @lock: Optional lock callback (overrides regmap's default lock + * function, based on spinlock or mutex). + * @unlock: As above for unlocking. + * @lock_arg: This field is passed as the only argument of lock/unlock + * functions (ignored in case regular lock/unlock functions + * are not overridden). * @max_register: Optional, specifies the maximum valid register address. + * @max_register_is_0: Optional, specifies that zero value in @max_register + * should be taken into account. This is a workaround to + * apply handling of @max_register for regmap that contains + * only one register. * @wr_table: Optional, points to a struct regmap_access_table specifying * valid ranges for write access. * @rd_table: As above, for read access. @@ -352,28 +386,27 @@ typedef void (*regmap_unlock)(void *); * @reg_defaults_raw: Power on reset values for registers (for use with * register cache support). * @num_reg_defaults_raw: Number of elements in reg_defaults_raw. - * @reg_format_endian: Endianness for formatted register addresses. If this is - * DEFAULT, the @reg_format_endian_default value from the - * regmap bus is used. - * @val_format_endian: Endianness for formatted register values. If this is - * DEFAULT, the @reg_format_endian_default value from the - * regmap bus is used. - * - * @ranges: Array of configuration entries for virtual address ranges. - * @num_ranges: Number of range configuration entries. * @use_hwlock: Indicate if a hardware spinlock should be used. * @use_raw_spinlock: Indicate if a raw spinlock should be used. * @hwlock_id: Specify the hardware spinlock id. * @hwlock_mode: The hardware spinlock mode, should be HWLOCK_IRQSTATE, * HWLOCK_IRQ or 0. - * @can_sleep: Optional, specifies whether regmap operations can sleep. + * @reg_format_endian: Endianness for formatted register addresses. If this is + * DEFAULT, the @reg_format_endian_default value from the + * regmap bus is used. + * @val_format_endian: Endianness for formatted register values. If this is + * DEFAULT, the @reg_format_endian_default value from the + * regmap bus is used. + * + * @ranges: Array of configuration entries for virtual address ranges. + * @num_ranges: Number of range configuration entries. */ struct regmap_config { const char *name; int reg_bits; int reg_stride; - int reg_downshift; + int reg_shift; unsigned int reg_base; int pad_bits; int val_bits; @@ -385,11 +418,6 @@ struct regmap_config { bool (*writeable_noinc_reg)(struct device *dev, unsigned int reg); bool (*readable_noinc_reg)(struct device *dev, unsigned int reg); - bool disable_locking; - regmap_lock lock; - regmap_unlock unlock; - void *lock_arg; - int (*reg_read)(void *context, unsigned int reg, unsigned int *val); int (*reg_write)(void *context, unsigned int reg, unsigned int val); int (*reg_update_bits)(void *context, unsigned int reg, @@ -401,10 +429,18 @@ struct regmap_config { size_t max_raw_read; size_t max_raw_write; + bool can_sleep; + bool fast_io; bool io_port; + bool disable_locking; + regmap_lock lock; + regmap_unlock unlock; + void *lock_arg; + unsigned int max_register; + bool max_register_is_0; const struct regmap_access_table *wr_table; const struct regmap_access_table *rd_table; const struct regmap_access_table *volatile_table; @@ -426,18 +462,16 @@ struct regmap_config { bool use_relaxed_mmio; bool can_multi_write; - enum regmap_endian reg_format_endian; - enum regmap_endian val_format_endian; - - const struct regmap_range_cfg *ranges; - unsigned int num_ranges; - bool use_hwlock; bool use_raw_spinlock; unsigned int hwlock_id; unsigned int hwlock_mode; - bool can_sleep; + enum regmap_endian reg_format_endian; + enum regmap_endian val_format_endian; + + const struct regmap_range_cfg *ranges; + unsigned int num_ranges; }; /** @@ -477,6 +511,32 @@ struct regmap_range_cfg { unsigned int window_len; }; +/** + * struct regmap_sdw_mbq_cfg - Configuration for Multi-Byte Quantities + * + * @mbq_size: Callback returning the actual size of the given register. + * @deferrable: Callback returning true if the hardware can defer + * transactions to the given register. Deferral should + * only be used by SDCA parts and typically which controls + * are deferrable will be specified in either as a hard + * coded list or from the DisCo tables in the platform + * firmware. + * + * @timeout_us: The time in microseconds after which waiting for a deferred + * transaction should time out. + * @retry_us: The time in microseconds between polls of the function busy + * status whilst waiting for an opportunity to retry a deferred + * transaction. + * + * Provides additional configuration required for SoundWire MBQ register maps. + */ +struct regmap_sdw_mbq_cfg { + int (*mbq_size)(struct device *dev, unsigned int reg); + bool (*deferrable)(struct device *dev, unsigned int reg); + unsigned long timeout_us; + unsigned long retry_us; +}; + struct regmap_async; typedef int (*regmap_hw_write)(void *context, const void *data, @@ -512,6 +572,7 @@ typedef void (*regmap_hw_free_context)(void *context); * to perform locking. This field is ignored if custom lock/unlock * functions are used (see fields lock/unlock of * struct regmap_config). + * @free_on_exit: kfree this on exit of regmap * @write: Write operation. * @gather_write: Write operation with split register/value, return -ENOTSUPP * if not implemented on a given device. @@ -540,10 +601,10 @@ typedef void (*regmap_hw_free_context)(void *context); * DEFAULT, BIG is assumed. * @max_raw_read: Max raw read size that can be used on the bus. * @max_raw_write: Max raw write size that can be used on the bus. - * @free_on_exit: kfree this on exit of regmap */ struct regmap_bus { bool fast_io; + bool free_on_exit; regmap_hw_write write; regmap_hw_gather_write gather_write; regmap_hw_async_write async_write; @@ -560,7 +621,6 @@ struct regmap_bus { enum regmap_endian val_format_endian_default; size_t max_raw_read; size_t max_raw_write; - bool free_on_exit; }; /* @@ -621,8 +681,9 @@ struct regmap *__regmap_init_sdw(struct sdw_slave *sdw, const struct regmap_config *config, struct lock_class_key *lock_key, const char *lock_name); -struct regmap *__regmap_init_sdw_mbq(struct sdw_slave *sdw, +struct regmap *__regmap_init_sdw_mbq(struct device *dev, struct sdw_slave *sdw, const struct regmap_config *config, + const struct regmap_sdw_mbq_cfg *mbq_config, struct lock_class_key *lock_key, const char *lock_name); struct regmap *__regmap_init_spi_avmm(struct spi_device *spi, @@ -682,8 +743,9 @@ struct regmap *__devm_regmap_init_sdw(struct sdw_slave *sdw, const struct regmap_config *config, struct lock_class_key *lock_key, const char *lock_name); -struct regmap *__devm_regmap_init_sdw_mbq(struct sdw_slave *sdw, +struct regmap *__devm_regmap_init_sdw_mbq(struct device *dev, struct sdw_slave *sdw, const struct regmap_config *config, + const struct regmap_sdw_mbq_cfg *mbq_config, struct lock_class_key *lock_key, const char *lock_name); struct regmap *__devm_regmap_init_slimbus(struct slim_device *slimbus, @@ -856,7 +918,7 @@ int regmap_attach_dev(struct device *dev, struct regmap *map, * @config: Configuration for register map * * The return value will be an ERR_PTR() on error or a valid pointer to - * a struct regmap. + * a struct regmap. Implies 'fast_io'. */ #define regmap_init_mmio_clk(dev, clk_id, regs, config) \ __regmap_lockdep_wrapper(__regmap_init_mmio_clk, #config, \ @@ -870,7 +932,7 @@ int regmap_attach_dev(struct device *dev, struct regmap *map, * @config: Configuration for register map * * The return value will be an ERR_PTR() on error or a valid pointer to - * a struct regmap. + * a struct regmap. Implies 'fast_io'. */ #define regmap_init_mmio(dev, regs, config) \ regmap_init_mmio_clk(dev, NULL, regs, config) @@ -913,7 +975,22 @@ bool regmap_ac97_default_volatile(struct device *dev, unsigned int reg); */ #define regmap_init_sdw_mbq(sdw, config) \ __regmap_lockdep_wrapper(__regmap_init_sdw_mbq, #config, \ - sdw, config) + &sdw->dev, sdw, config, NULL) + +/** + * regmap_init_sdw_mbq_cfg() - Initialise MBQ SDW register map with config + * + * @sdw: Device that will be interacted with + * @config: Configuration for register map + * @mbq_config: Properties for the MBQ registers + * + * The return value will be an ERR_PTR() on error or a valid pointer + * to a struct regmap. The regmap will be automatically freed by the + * device management code. + */ +#define regmap_init_sdw_mbq_cfg(dev, sdw, config, mbq_config) \ + __regmap_lockdep_wrapper(__regmap_init_sdw_mbq, #config, \ + dev, sdw, config, mbq_config) /** * regmap_init_spi_avmm() - Initialize register map for Intel SPI Slave @@ -1066,7 +1143,7 @@ bool regmap_ac97_default_volatile(struct device *dev, unsigned int reg); * * The return value will be an ERR_PTR() on error or a valid pointer * to a struct regmap. The regmap will be automatically freed by the - * device management code. + * device management code. Implies 'fast_io'. */ #define devm_regmap_init_mmio_clk(dev, clk_id, regs, config) \ __regmap_lockdep_wrapper(__devm_regmap_init_mmio_clk, #config, \ @@ -1081,7 +1158,7 @@ bool regmap_ac97_default_volatile(struct device *dev, unsigned int reg); * * The return value will be an ERR_PTR() on error or a valid pointer * to a struct regmap. The regmap will be automatically freed by the - * device management code. + * device management code. Implies 'fast_io'. */ #define devm_regmap_init_mmio(dev, regs, config) \ devm_regmap_init_mmio_clk(dev, NULL, regs, config) @@ -1126,7 +1203,23 @@ bool regmap_ac97_default_volatile(struct device *dev, unsigned int reg); */ #define devm_regmap_init_sdw_mbq(sdw, config) \ __regmap_lockdep_wrapper(__devm_regmap_init_sdw_mbq, #config, \ - sdw, config) + &sdw->dev, sdw, config, NULL) + +/** + * devm_regmap_init_sdw_mbq_cfg() - Initialise managed MBQ SDW register map with config + * + * @dev: Device that will be interacted with + * @sdw: SoundWire Device that will be interacted with + * @config: Configuration for register map + * @mbq_config: Properties for the MBQ registers + * + * The return value will be an ERR_PTR() on error or a valid pointer + * to a struct regmap. The regmap will be automatically freed by the + * device management code. + */ +#define devm_regmap_init_sdw_mbq_cfg(dev, sdw, config, mbq_config) \ + __regmap_lockdep_wrapper(__devm_regmap_init_sdw_mbq, \ + #config, dev, sdw, config, mbq_config) /** * devm_regmap_init_slimbus() - Initialise managed register map @@ -1208,12 +1301,15 @@ int regmap_multi_reg_write_bypassed(struct regmap *map, int regmap_raw_write_async(struct regmap *map, unsigned int reg, const void *val, size_t val_len); int regmap_read(struct regmap *map, unsigned int reg, unsigned int *val); +int regmap_read_bypassed(struct regmap *map, unsigned int reg, unsigned int *val); int regmap_raw_read(struct regmap *map, unsigned int reg, void *val, size_t val_len); int regmap_noinc_read(struct regmap *map, unsigned int reg, void *val, size_t val_len); int regmap_bulk_read(struct regmap *map, unsigned int reg, void *val, size_t val_count); +int regmap_multi_reg_read(struct regmap *map, const unsigned int *reg, void *val, + size_t val_count); int regmap_update_bits_base(struct regmap *map, unsigned int reg, unsigned int mask, unsigned int val, bool *change, bool async, bool force); @@ -1262,6 +1358,7 @@ bool regmap_can_raw_write(struct regmap *map); size_t regmap_get_raw_read_max(struct regmap *map); size_t regmap_get_raw_write_max(struct regmap *map); +void regcache_sort_defaults(struct reg_default *defaults, unsigned int ndefaults); int regcache_sync(struct regmap *map); int regcache_sync_region(struct regmap *map, unsigned int min, unsigned int max); @@ -1270,6 +1367,7 @@ int regcache_drop_region(struct regmap *map, unsigned int min, void regcache_cache_only(struct regmap *map, bool enable); void regcache_cache_bypass(struct regmap *map, bool enable); void regcache_mark_dirty(struct regmap *map); +bool regcache_reg_cached(struct regmap *map, unsigned int reg); bool regmap_check_range_table(struct regmap *map, unsigned int reg, const struct regmap_access_table *table); @@ -1302,6 +1400,15 @@ static inline int regmap_clear_bits(struct regmap *map, return regmap_update_bits_base(map, reg, bits, 0, NULL, false, false); } +static inline int regmap_assign_bits(struct regmap *map, unsigned int reg, + unsigned int bits, bool value) +{ + if (value) + return regmap_set_bits(map, reg, bits); + else + return regmap_clear_bits(map, reg, bits); +} + int regmap_test_bits(struct regmap *map, unsigned int reg, unsigned int bits); /** @@ -1495,6 +1602,9 @@ struct regmap_irq_chip_data; * struct regmap_irq_chip - Description of a generic regmap irq_chip. * * @name: Descriptive name for IRQ controller. + * @domain_suffix: Name suffix to be appended to end of IRQ domain name. Needed + * when multiple regmap-IRQ controllers are created from same + * device. * * @main_status: Base main status register address. For chips which have * interrupts arranged in separate sub-irq blocks with own IRQ @@ -1511,9 +1621,6 @@ struct regmap_irq_chip_data; * status_base. Should contain num_regs arrays. * Can be provided for chips with more complex mapping than * 1.st bit to 1.st sub-reg, 2.nd bit to 2.nd sub-reg, ... - * When used with not_fixed_stride, each one-element array - * member contains offset calculated as address from each - * peripheral to first peripheral. * @num_main_regs: Number of 'main status' irq registers for chips which have * main_status set. * @@ -1525,16 +1632,9 @@ struct regmap_irq_chip_data; * @ack_base: Base ack address. If zero then the chip is clear on read. * Using zero value is possible with @use_ack bit. * @wake_base: Base address for wake enables. If zero unsupported. - * @type_base: Base address for irq type. If zero unsupported. Deprecated, - * use @config_base instead. - * @virt_reg_base: Base addresses for extra config regs. Deprecated, use - * @config_base instead. * @config_base: Base address for IRQ type config regs. If null unsupported. * @irq_reg_stride: Stride to use for chips where registers are not contiguous. * @init_ack_masked: Ack all masked interrupts once during initalization. - * @mask_invert: Inverted mask register: cleared bits are masked out. - * Deprecated; prefer describing an inverted mask register as - * an unmask register. * @mask_unmask_non_inverted: Controls mask bit inversion for chips that set * both @mask_base and @unmask_base. If false, mask and unmask bits are * inverted (which is deprecated behavior); if true, bits will not be @@ -1546,9 +1646,10 @@ struct regmap_irq_chip_data; * @use_ack: Use @ack register even if it is zero. * @ack_invert: Inverted ack register: cleared bits for ack. * @clear_ack: Use this to set 1 and 0 or vice-versa to clear interrupts. - * @wake_invert: Inverted wake register: cleared bits are wake enabled. - * @type_invert: Invert the type flags. Deprecated, use config registers - * instead. + * @status_invert: Inverted status register: cleared bits are active interrupts. + * @status_is_level: Status register is actuall signal level: Xor status + * register with previous value to get active interrupts. + * @wake_invert: Inverted wake register: cleared bits are wake disabled. * @type_in_mask: Use the mask registers for controlling irq type. Use this if * the hardware provides separate bits for rising/falling edge * or low/high level interrupts and they should be combined into @@ -1557,40 +1658,29 @@ struct regmap_irq_chip_data; * @clear_on_unmask: For chips with interrupts cleared on read: read the status * registers before unmasking interrupts to clear any bits * set when they were masked. - * @not_fixed_stride: Used when chip peripherals are not laid out with fixed - * stride. Must be used with sub_reg_offsets containing the - * offsets to each peripheral. Deprecated; the same thing - * can be accomplished with a @get_irq_reg callback, without - * the need for a @sub_reg_offsets table. - * @status_invert: Inverted status register: cleared bits are active interrupts. * @runtime_pm: Hold a runtime PM lock on the device when accessing it. + * @no_status: No status register: all interrupts assumed generated by device. * * @num_regs: Number of registers in each control bank. + * * @irqs: Descriptors for individual IRQs. Interrupt numbers are * assigned based on the index in the array of the interrupt. * @num_irqs: Number of descriptors. - * @num_type_reg: Number of type registers. Deprecated, use config registers - * instead. - * @num_virt_regs: Number of non-standard irq configuration registers. - * If zero unsupported. Deprecated, use config registers - * instead. * @num_config_bases: Number of config base registers. * @num_config_regs: Number of config registers for each config base register. + * * @handle_pre_irq: Driver specific callback to handle interrupt from device * before regmap_irq_handler process the interrupts. * @handle_post_irq: Driver specific callback to handle interrupt from device * after handling the interrupts in regmap_irq_handler(). * @handle_mask_sync: Callback used to handle IRQ mask syncs. The index will be * in the range [0, num_regs) - * @set_type_virt: Driver specific callback to extend regmap_irq_set_type() - * and configure virt regs. Deprecated, use @set_type_config - * callback and config registers instead. * @set_type_config: Callback used for configuring irq types. * @get_irq_reg: Callback for mapping (base register, index) pairs to register * addresses. The base register will be one of @status_base, * @mask_base, etc., @main_status, or any of @config_base. * The index will be in the range [0, num_main_regs[ for the - * main status base, [0, num_type_settings[ for any config + * main status base, [0, num_config_regs[ for any config * register base, and [0, num_regs[ for any other base. * If unspecified then regmap_irq_get_irq_reg_linear() is used. * @irq_drv_data: Driver specific IRQ data which is passed as parameter when @@ -1602,10 +1692,11 @@ struct regmap_irq_chip_data; */ struct regmap_irq_chip { const char *name; + const char *domain_suffix; unsigned int main_status; unsigned int num_main_status_bits; - struct regmap_irq_sub_irq_map *sub_reg_offsets; + const struct regmap_irq_sub_irq_map *sub_reg_offsets; int num_main_regs; unsigned int status_base; @@ -1613,43 +1704,36 @@ struct regmap_irq_chip { unsigned int unmask_base; unsigned int ack_base; unsigned int wake_base; - unsigned int type_base; - unsigned int *virt_reg_base; const unsigned int *config_base; unsigned int irq_reg_stride; unsigned int init_ack_masked:1; - unsigned int mask_invert:1; unsigned int mask_unmask_non_inverted:1; unsigned int use_ack:1; unsigned int ack_invert:1; unsigned int clear_ack:1; + unsigned int status_invert:1; + unsigned int status_is_level:1; unsigned int wake_invert:1; - unsigned int runtime_pm:1; - unsigned int type_invert:1; unsigned int type_in_mask:1; unsigned int clear_on_unmask:1; - unsigned int not_fixed_stride:1; - unsigned int status_invert:1; + unsigned int runtime_pm:1; + unsigned int no_status:1; int num_regs; const struct regmap_irq *irqs; int num_irqs; - int num_type_reg; - int num_virt_regs; int num_config_bases; int num_config_regs; int (*handle_pre_irq)(void *irq_drv_data); int (*handle_post_irq)(void *irq_drv_data); - int (*handle_mask_sync)(struct regmap *map, int index, - unsigned int mask_buf_def, + int (*handle_mask_sync)(int index, unsigned int mask_buf_def, unsigned int mask_buf, void *irq_drv_data); - int (*set_type_virt)(unsigned int **buf, unsigned int type, - unsigned long hwirq, int reg); int (*set_type_config)(unsigned int **buf, unsigned int type, - const struct regmap_irq *irq_data, int idx); + const struct regmap_irq *irq_data, int idx, + void *irq_drv_data); unsigned int (*get_irq_reg)(struct regmap_irq_chip_data *data, unsigned int base, int index); void *irq_drv_data; @@ -1658,7 +1742,8 @@ struct regmap_irq_chip { unsigned int regmap_irq_get_irq_reg_linear(struct regmap_irq_chip_data *data, unsigned int base, int index); int regmap_irq_set_type_config_simple(unsigned int **buf, unsigned int type, - const struct regmap_irq *irq_data, int idx); + const struct regmap_irq *irq_data, + int idx, void *irq_drv_data); int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags, int irq_base, const struct regmap_irq_chip *chip, @@ -1745,6 +1830,13 @@ static inline int regmap_read(struct regmap *map, unsigned int reg, return -EINVAL; } +static inline int regmap_read_bypassed(struct regmap *map, unsigned int reg, + unsigned int *val) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + static inline int regmap_raw_read(struct regmap *map, unsigned int reg, void *val, size_t val_len) { @@ -1788,6 +1880,13 @@ static inline int regmap_clear_bits(struct regmap *map, return -EINVAL; } +static inline int regmap_assign_bits(struct regmap *map, unsigned int reg, + unsigned int bits, bool value) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + static inline int regmap_test_bits(struct regmap *map, unsigned int reg, unsigned int bits) { @@ -1954,6 +2053,12 @@ static inline bool regmap_might_sleep(struct regmap *map) return true; } +static inline void regcache_sort_defaults(struct reg_default *defaults, + unsigned int ndefaults) +{ + WARN_ONCE(1, "regmap API is disabled"); +} + static inline int regcache_sync(struct regmap *map) { WARN_ONCE(1, "regmap API is disabled"); |