diff options
Diffstat (limited to 'include/linux/regmap.h')
| -rw-r--r-- | include/linux/regmap.h | 1717 |
1 files changed, 1602 insertions, 115 deletions
diff --git a/include/linux/regmap.h b/include/linux/regmap.h index 75981d0b57dc..b0b9be750d93 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ #ifndef __LINUX_REGMAP_H #define __LINUX_REGMAP_H @@ -7,45 +8,207 @@ * Copyright 2011 Wolfson Microelectronics plc * * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/list.h> #include <linux/rbtree.h> +#include <linux/ktime.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/bug.h> +#include <linux/lockdep.h> +#include <linux/iopoll.h> +#include <linux/fwnode.h> struct module; +struct clk; struct device; +struct device_node; +struct fsi_device; struct i2c_client; +struct i3c_device; struct irq_domain; +struct mdio_device; +struct slim_device; struct spi_device; +struct spmi_device; struct regmap; struct regmap_range_cfg; struct regmap_field; +struct snd_ac97; +struct sdw_slave; + +/* + * regmap_mdio address encoding. IEEE 802.3ae clause 45 addresses consist of a + * device address and a register address. + */ +#define REGMAP_MDIO_C45_DEVAD_SHIFT 16 +#define REGMAP_MDIO_C45_DEVAD_MASK GENMASK(20, 16) +#define REGMAP_MDIO_C45_REGNUM_MASK GENMASK(15, 0) + +/* + * regmap.reg_shift indicates by how much we must shift registers prior to + * performing any operation. It's a signed value, positive numbers means + * downshifting the register's address, while negative numbers means upshifting. + */ +#define REGMAP_UPSHIFT(s) (-(s)) +#define REGMAP_DOWNSHIFT(s) (s) -/* An enum of all the supported cache types */ +/* + * The supported cache types, the default is no cache. Any new caches should + * usually use the maple tree cache unless they specifically require that there + * are never any allocations at runtime in which case they should use the sparse + * flat cache. The rbtree cache *may* have some performance advantage for very + * low end systems that make heavy use of cache syncs but is mainly legacy. + * These caches are sparse and entries will be initialized from hardware if no + * default has been provided. + * The non-sparse flat cache is provided for compatibility with existing users + * and will zero-initialize cache entries for which no defaults are provided. + * New users should use the sparse flat cache. + */ enum regcache_type { REGCACHE_NONE, REGCACHE_RBTREE, - REGCACHE_COMPRESSED, REGCACHE_FLAT, + REGCACHE_MAPLE, + REGCACHE_FLAT_S, }; /** - * Default value for a register. We use an array of structs rather - * than a simple array as many modern devices have very sparse - * register maps. + * struct reg_default - Default value for a register. * * @reg: Register address. * @def: Register default value. + * + * We use an array of structs rather than a simple array as many modern devices + * have very sparse register maps. */ struct reg_default { unsigned int reg; unsigned int def; }; +/** + * struct reg_sequence - An individual write from a sequence of writes. + * + * @reg: Register address. + * @def: Register value. + * @delay_us: Delay to be applied after the register write in microseconds + * + * Register/value pairs for sequences of writes with an optional delay in + * microseconds to be applied after each write. + */ +struct reg_sequence { + unsigned int reg; + unsigned int def; + unsigned int delay_us; +}; + +#define REG_SEQ(_reg, _def, _delay_us) { \ + .reg = _reg, \ + .def = _def, \ + .delay_us = _delay_us, \ + } +#define REG_SEQ0(_reg, _def) REG_SEQ(_reg, _def, 0) + +/** + * regmap_read_poll_timeout - Poll until a condition is met or a timeout occurs + * + * @map: Regmap to read from + * @addr: Address to poll + * @val: Unsigned integer variable to read the value into + * @cond: Break condition (usually involving @val) + * @sleep_us: Maximum time to sleep between reads in us (0 tight-loops). Please + * read usleep_range() function description for details and + * limitations. + * @timeout_us: Timeout in us, 0 means never timeout + * + * This is modelled after the readx_poll_timeout macros in linux/iopoll.h. + * + * Returns: 0 on success and -ETIMEDOUT upon a timeout or the regmap_read + * error return value in case of a error read. In the two former cases, + * the last read value at @addr is stored in @val. Must not be called + * from atomic context if sleep_us or timeout_us are used. + */ +#define regmap_read_poll_timeout(map, addr, val, cond, sleep_us, timeout_us) \ +({ \ + int __ret, __tmp; \ + __tmp = read_poll_timeout(regmap_read, __ret, __ret || (cond), \ + sleep_us, timeout_us, false, (map), (addr), &(val)); \ + __ret ?: __tmp; \ +}) + +/** + * regmap_read_poll_timeout_atomic - Poll until a condition is met or a timeout occurs + * + * @map: Regmap to read from + * @addr: Address to poll + * @val: Unsigned integer variable to read the value into + * @cond: Break condition (usually involving @val) + * @delay_us: Time to udelay between reads in us (0 tight-loops). Please + * read udelay() function description for details and + * limitations. + * @timeout_us: Timeout in us, 0 means never timeout + * + * This is modelled after the readx_poll_timeout_atomic macros in linux/iopoll.h. + * + * Note: In general regmap cannot be used in atomic context. If you want to use + * this macro then first setup your regmap for atomic use (flat or no cache + * and MMIO regmap). + * + * Returns: 0 on success and -ETIMEDOUT upon a timeout or the regmap_read + * error return value in case of a error read. In the two former cases, + * the last read value at @addr is stored in @val. + */ +#define regmap_read_poll_timeout_atomic(map, addr, val, cond, delay_us, timeout_us) \ +({ \ + u64 __timeout_us = (timeout_us); \ + unsigned long __delay_us = (delay_us); \ + ktime_t __timeout = ktime_add_us(ktime_get(), __timeout_us); \ + int __ret; \ + for (;;) { \ + __ret = regmap_read((map), (addr), &(val)); \ + if (__ret) \ + break; \ + if (cond) \ + break; \ + if ((__timeout_us) && \ + ktime_compare(ktime_get(), __timeout) > 0) { \ + __ret = regmap_read((map), (addr), &(val)); \ + break; \ + } \ + if (__delay_us) \ + udelay(__delay_us); \ + } \ + __ret ?: ((cond) ? 0 : -ETIMEDOUT); \ +}) + +/** + * regmap_field_read_poll_timeout - Poll until a condition is met or timeout + * + * @field: Regmap field to read from + * @val: Unsigned integer variable to read the value into + * @cond: Break condition (usually involving @val) + * @sleep_us: Maximum time to sleep between reads in us (0 tight-loops). Please + * read usleep_range() function description for details and + * limitations. + * @timeout_us: Timeout in us, 0 means never timeout + * + * This is modelled after the readx_poll_timeout macros in linux/iopoll.h. + * + * Returns: 0 on success and -ETIMEDOUT upon a timeout or the regmap_field_read + * error return value in case of a error read. In the two former cases, + * the last read value at @addr is stored in @val. Must not be called + * from atomic context if sleep_us or timeout_us are used. + */ +#define regmap_field_read_poll_timeout(field, val, cond, sleep_us, timeout_us) \ +({ \ + int __ret, __tmp; \ + __tmp = read_poll_timeout(regmap_field_read, __ret, __ret || (cond), \ + sleep_us, timeout_us, false, (field), &(val)); \ + __ret ?: __tmp; \ +}) + #ifdef CONFIG_REGMAP enum regmap_endian { @@ -57,8 +220,8 @@ enum regmap_endian { }; /** - * A register range, used for access related checks - * (readable/writeable/volatile/precious checks) + * struct regmap_range - A register range, used for access related checks + * (readable/writeable/volatile/precious checks) * * @range_min: address of first register * @range_max: address of last register @@ -68,16 +231,20 @@ struct regmap_range { unsigned int range_max; }; -/* - * A table of ranges including some yes ranges and some no ranges. - * If a register belongs to a no_range, the corresponding check function - * will return false. If a register belongs to a yes range, the corresponding - * check function will return true. "no_ranges" are searched first. +#define regmap_reg_range(low, high) { .range_min = low, .range_max = high, } + +/** + * struct regmap_access_table - A table of register ranges for access checks * * @yes_ranges : pointer to an array of regmap ranges used as "yes ranges" * @n_yes_ranges: size of the above array * @no_ranges: pointer to an array of regmap ranges used as "no ranges" * @n_no_ranges: size of the above array + * + * A table of ranges including some yes ranges and some no ranges. + * If a register belongs to a no_range, the corresponding check function + * will return false. If a register belongs to a yes range, the corresponding + * check function will return true. "no_ranges" are searched first. */ struct regmap_access_table { const struct regmap_range *yes_ranges; @@ -90,7 +257,7 @@ typedef void (*regmap_lock)(void *); typedef void (*regmap_unlock)(void *); /** - * Configuration for the register map of a device. + * struct regmap_config - Configuration for the register map of a device. * * @name: Optional name of the regmap. Useful when a device has multiple * register regions. @@ -99,6 +266,11 @@ typedef void (*regmap_unlock)(void *); * @reg_stride: The register address stride. Valid register addresses are a * multiple of this value. If set to 0, a value of 1 will be * used. + * @reg_shift: The number of bits to shift the register before performing any + * operations. Any positive number will be downshifted, and negative + * values will be upshifted + * @reg_base: Value to be added to every register address before performing any + * operation. * @pad_bits: Number of bits of padding between register and value. * @val_bits: Number of bits in a register value, mandatory. * @@ -117,59 +289,114 @@ typedef void (*regmap_unlock)(void *); * volatile_table (see below) is not, the check is performed on * such table (a register is volatile if it belongs to one of * the ranges specified by volatile_table). - * @precious_reg: Optional callback returning true if the rgister + * @precious_reg: Optional callback returning true if the register * should not be read outside of a call from the driver - * (eg, a clear on read interrupt status register). If this + * (e.g., a clear on read interrupt status register). If this * field is NULL but precious_table (see below) is not, the * check is performed on such table (a register is precious if * it belongs to one of the ranges specified by precious_table). - * @lock: Optional lock callback (overrides regmap's default lock - * function, based on spinlock or mutex). - * @unlock: As above for unlocking. - * @lock_arg: this field is passed as the only argument of lock/unlock - * functions (ignored in case regular lock/unlock functions - * are not overridden). + * @writeable_noinc_reg: Optional callback returning true if the register + * supports multiple write operations without incrementing + * the register number. If this field is NULL but + * wr_noinc_table (see below) is not, the check is + * performed on such table (a register is no increment + * writeable if it belongs to one of the ranges specified + * by wr_noinc_table). + * @readable_noinc_reg: Optional callback returning true if the register + * supports multiple read operations without incrementing + * the register number. If this field is NULL but + * rd_noinc_table (see below) is not, the check is + * performed on such table (a register is no increment + * readable if it belongs to one of the ranges specified + * by rd_noinc_table). * @reg_read: Optional callback that if filled will be used to perform * all the reads from the registers. Should only be provided for - * devices whos read operation cannot be represented as a simple read - * operation on a bus such as SPI, I2C, etc. Most of the devices do - * not need this. + * devices whose read operation cannot be represented as a simple + * read operation on a bus such as SPI, I2C, etc. Most of the + * devices do not need this. * @reg_write: Same as above for writing. + * @reg_update_bits: Optional callback that if filled will be used to perform + * all the update_bits(rmw) operation. Should only be provided + * if the function require special handling with lock and reg + * handling and the operation cannot be represented as a simple + * update_bits operation on a bus such as SPI, I2C, etc. + * @read: Optional callback that if filled will be used to perform all the + * bulk reads from the registers. Data is returned in the buffer used + * to transmit data. + * @write: Same as above for writing. + * @max_raw_read: Max raw read size that can be used on the device. + * @max_raw_write: Max raw write size that can be used on the device. + * @can_sleep: Optional, specifies whether regmap operations can sleep. * @fast_io: Register IO is fast. Use a spinlock instead of a mutex * to perform locking. This field is ignored if custom lock/unlock * functions are used (see fields lock/unlock of struct regmap_config). * This field is a duplicate of a similar file in * 'struct regmap_bus' and serves exact same purpose. * Use it only for "no-bus" cases. - * @max_register: Optional, specifies the maximum valid register index. + * @io_port: Support IO port accessors. Makes sense only when MMIO vs. IO port + * access can be distinguished. + * @disable_locking: This regmap is either protected by external means or + * is guaranteed not to be accessed from multiple threads. + * Don't use any locking mechanisms. + * @lock: Optional lock callback (overrides regmap's default lock + * function, based on spinlock or mutex). + * @unlock: As above for unlocking. + * @lock_arg: This field is passed as the only argument of lock/unlock + * functions (ignored in case regular lock/unlock functions + * are not overridden). + * @max_register: Optional, specifies the maximum valid register address. + * @max_register_is_0: Optional, specifies that zero value in @max_register + * should be taken into account. This is a workaround to + * apply handling of @max_register for regmap that contains + * only one register. * @wr_table: Optional, points to a struct regmap_access_table specifying * valid ranges for write access. * @rd_table: As above, for read access. * @volatile_table: As above, for volatile registers. * @precious_table: As above, for precious registers. + * @wr_noinc_table: As above, for no increment writeable registers. + * @rd_noinc_table: As above, for no increment readable registers. * @reg_defaults: Power on reset values for registers (for use with * register cache support). * @num_reg_defaults: Number of elements in reg_defaults. * - * @read_flag_mask: Mask to be set in the top byte of the register when doing + * @read_flag_mask: Mask to be set in the top bytes of the register when doing * a read. - * @write_flag_mask: Mask to be set in the top byte of the register when doing + * @write_flag_mask: Mask to be set in the top bytes of the register when doing * a write. If both read_flag_mask and write_flag_mask are - * empty the regmap_bus default masks are used. - * @use_single_rw: If set, converts the bulk read and write operations into - * a series of single read and write operations. This is useful - * for device that does not support bulk read and write. + * empty and zero_flag_mask is not set the regmap_bus default + * masks are used. + * @zero_flag_mask: If set, read_flag_mask and write_flag_mask are used even + * if they are both empty. + * @use_relaxed_mmio: If set, MMIO R/W operations will not use memory barriers. + * This can avoid load on devices which don't require strict + * orderings, but drivers should carefully add any explicit + * memory barriers when they may require them. + * @use_single_read: If set, converts the bulk read operation into a series of + * single read operations. This is useful for a device that + * does not support bulk read. + * @use_single_write: If set, converts the bulk write operation into a series of + * single write operations. This is useful for a device that + * does not support bulk write. + * @can_multi_write: If set, the device supports the multi write mode of bulk + * write operations, if clear multi write requests will be + * split into individual write operations * * @cache_type: The actual cache type. * @reg_defaults_raw: Power on reset values for registers (for use with * register cache support). * @num_reg_defaults_raw: Number of elements in reg_defaults_raw. + * @use_hwlock: Indicate if a hardware spinlock should be used. + * @use_raw_spinlock: Indicate if a raw spinlock should be used. + * @hwlock_id: Specify the hardware spinlock id. + * @hwlock_mode: The hardware spinlock mode, should be HWLOCK_IRQSTATE, + * HWLOCK_IRQ or 0. * @reg_format_endian: Endianness for formatted register addresses. If this is - * DEFAULT, the @reg_format_endian_default value from the - * regmap bus is used. + * DEFAULT, the @reg_format_endian_default value from the + * regmap bus is used. * @val_format_endian: Endianness for formatted register values. If this is - * DEFAULT, the @reg_format_endian_default value from the - * regmap bus is used. + * DEFAULT, the @reg_format_endian_default value from the + * regmap bus is used. * * @ranges: Array of configuration entries for virtual address ranges. * @num_ranges: Number of range configuration entries. @@ -179,6 +406,8 @@ struct regmap_config { int reg_bits; int reg_stride; + int reg_shift; + unsigned int reg_base; int pad_bits; int val_bits; @@ -186,30 +415,57 @@ struct regmap_config { bool (*readable_reg)(struct device *dev, unsigned int reg); bool (*volatile_reg)(struct device *dev, unsigned int reg); bool (*precious_reg)(struct device *dev, unsigned int reg); - regmap_lock lock; - regmap_unlock unlock; - void *lock_arg; + bool (*writeable_noinc_reg)(struct device *dev, unsigned int reg); + bool (*readable_noinc_reg)(struct device *dev, unsigned int reg); int (*reg_read)(void *context, unsigned int reg, unsigned int *val); int (*reg_write)(void *context, unsigned int reg, unsigned int val); + int (*reg_update_bits)(void *context, unsigned int reg, + unsigned int mask, unsigned int val); + /* Bulk read/write */ + int (*read)(void *context, const void *reg_buf, size_t reg_size, + void *val_buf, size_t val_size); + int (*write)(void *context, const void *data, size_t count); + size_t max_raw_read; + size_t max_raw_write; + + bool can_sleep; bool fast_io; + bool io_port; + + bool disable_locking; + regmap_lock lock; + regmap_unlock unlock; + void *lock_arg; unsigned int max_register; + bool max_register_is_0; const struct regmap_access_table *wr_table; const struct regmap_access_table *rd_table; const struct regmap_access_table *volatile_table; const struct regmap_access_table *precious_table; + const struct regmap_access_table *wr_noinc_table; + const struct regmap_access_table *rd_noinc_table; const struct reg_default *reg_defaults; unsigned int num_reg_defaults; enum regcache_type cache_type; const void *reg_defaults_raw; unsigned int num_reg_defaults_raw; - u8 read_flag_mask; - u8 write_flag_mask; + unsigned long read_flag_mask; + unsigned long write_flag_mask; + bool zero_flag_mask; + + bool use_single_read; + bool use_single_write; + bool use_relaxed_mmio; + bool can_multi_write; - bool use_single_rw; + bool use_hwlock; + bool use_raw_spinlock; + unsigned int hwlock_id; + unsigned int hwlock_mode; enum regmap_endian reg_format_endian; enum regmap_endian val_format_endian; @@ -219,22 +475,24 @@ struct regmap_config { }; /** - * Configuration for indirectly accessed or paged registers. - * Registers, mapped to this virtual range, are accessed in two steps: - * 1. page selector register update; - * 2. access through data window registers. + * struct regmap_range_cfg - Configuration for indirectly accessed or paged + * registers. * * @name: Descriptive name for diagnostics * * @range_min: Address of the lowest register address in virtual range. * @range_max: Address of the highest register in virtual range. * - * @page_sel_reg: Register with selector field. - * @page_sel_mask: Bit shift for selector value. - * @page_sel_shift: Bit mask for selector value. + * @selector_reg: Register with selector field. + * @selector_mask: Bit mask for selector value. + * @selector_shift: Bit shift for selector value. * * @window_start: Address of first (lowest) register in data window. * @window_len: Number of registers in data window. + * + * Registers, mapped to this virtual range, are accessed in two steps: + * 1. page selector register update; + * 2. access through data window registers. */ struct regmap_range_cfg { const char *name; @@ -253,6 +511,32 @@ struct regmap_range_cfg { unsigned int window_len; }; +/** + * struct regmap_sdw_mbq_cfg - Configuration for Multi-Byte Quantities + * + * @mbq_size: Callback returning the actual size of the given register. + * @deferrable: Callback returning true if the hardware can defer + * transactions to the given register. Deferral should + * only be used by SDCA parts and typically which controls + * are deferrable will be specified in either as a hard + * coded list or from the DisCo tables in the platform + * firmware. + * + * @timeout_us: The time in microseconds after which waiting for a deferred + * transaction should time out. + * @retry_us: The time in microseconds between polls of the function busy + * status whilst waiting for an opportunity to retry a deferred + * transaction. + * + * Provides additional configuration required for SoundWire MBQ register maps. + */ +struct regmap_sdw_mbq_cfg { + int (*mbq_size)(struct device *dev, unsigned int reg); + bool (*deferrable)(struct device *dev, unsigned int reg); + unsigned long timeout_us; + unsigned long retry_us; +}; + struct regmap_async; typedef int (*regmap_hw_write)(void *context, const void *data, @@ -267,23 +551,45 @@ typedef int (*regmap_hw_async_write)(void *context, typedef int (*regmap_hw_read)(void *context, const void *reg_buf, size_t reg_size, void *val_buf, size_t val_size); +typedef int (*regmap_hw_reg_read)(void *context, unsigned int reg, + unsigned int *val); +typedef int (*regmap_hw_reg_noinc_read)(void *context, unsigned int reg, + void *val, size_t val_count); +typedef int (*regmap_hw_reg_write)(void *context, unsigned int reg, + unsigned int val); +typedef int (*regmap_hw_reg_noinc_write)(void *context, unsigned int reg, + const void *val, size_t val_count); +typedef int (*regmap_hw_reg_update_bits)(void *context, unsigned int reg, + unsigned int mask, unsigned int val); typedef struct regmap_async *(*regmap_hw_async_alloc)(void); typedef void (*regmap_hw_free_context)(void *context); /** - * Description of a hardware bus for the register map infrastructure. + * struct regmap_bus - Description of a hardware bus for the register map + * infrastructure. * * @fast_io: Register IO is fast. Use a spinlock instead of a mutex * to perform locking. This field is ignored if custom lock/unlock * functions are used (see fields lock/unlock of * struct regmap_config). + * @free_on_exit: kfree this on exit of regmap * @write: Write operation. * @gather_write: Write operation with split register/value, return -ENOTSUPP * if not implemented on a given device. * @async_write: Write operation which completes asynchronously, optional and * must serialise with respect to non-async I/O. + * @reg_write: Write a single register value to the given register address. This + * write operation has to complete when returning from the function. + * @reg_write_noinc: Write multiple register value to the same register. This + * write operation has to complete when returning from the function. + * @reg_update_bits: Update bits operation to be used against volatile + * registers, intended for devices supporting some mechanism + * for setting clearing bits without having to + * read/modify/write. * @read: Read operation. Data is returned in the buffer used to transmit * data. + * @reg_read: Read a single register value from a given register address. + * @free_context: Free context. * @async_alloc: Allocate a regmap_async() structure. * @read_flag_mask: Mask to be set in the top byte of the register when doing * a read. @@ -293,64 +599,558 @@ typedef void (*regmap_hw_free_context)(void *context); * @val_format_endian_default: Default endianness for formatted register * values. Used when the regmap_config specifies DEFAULT. If this is * DEFAULT, BIG is assumed. - * @async_size: Size of struct used for async work. + * @max_raw_read: Max raw read size that can be used on the bus. + * @max_raw_write: Max raw write size that can be used on the bus. */ struct regmap_bus { bool fast_io; + bool free_on_exit; regmap_hw_write write; regmap_hw_gather_write gather_write; regmap_hw_async_write async_write; + regmap_hw_reg_write reg_write; + regmap_hw_reg_noinc_write reg_noinc_write; + regmap_hw_reg_update_bits reg_update_bits; regmap_hw_read read; + regmap_hw_reg_read reg_read; + regmap_hw_reg_noinc_read reg_noinc_read; regmap_hw_free_context free_context; regmap_hw_async_alloc async_alloc; u8 read_flag_mask; enum regmap_endian reg_format_endian_default; enum regmap_endian val_format_endian_default; + size_t max_raw_read; + size_t max_raw_write; }; -struct regmap *regmap_init(struct device *dev, - const struct regmap_bus *bus, - void *bus_context, - const struct regmap_config *config); -struct regmap *regmap_init_i2c(struct i2c_client *i2c, - const struct regmap_config *config); -struct regmap *regmap_init_spi(struct spi_device *dev, - const struct regmap_config *config); -struct regmap *regmap_init_mmio_clk(struct device *dev, const char *clk_id, - void __iomem *regs, - const struct regmap_config *config); - -struct regmap *devm_regmap_init(struct device *dev, - const struct regmap_bus *bus, - void *bus_context, - const struct regmap_config *config); -struct regmap *devm_regmap_init_i2c(struct i2c_client *i2c, - const struct regmap_config *config); -struct regmap *devm_regmap_init_spi(struct spi_device *dev, - const struct regmap_config *config); -struct regmap *devm_regmap_init_mmio_clk(struct device *dev, const char *clk_id, - void __iomem *regs, - const struct regmap_config *config); - -/** - * regmap_init_mmio(): Initialise register map +/* + * __regmap_init functions. + * + * These functions take a lock key and name parameter, and should not be called + * directly. Instead, use the regmap_init macros that generate a key and name + * for each call. + */ +struct regmap *__regmap_init(struct device *dev, + const struct regmap_bus *bus, + void *bus_context, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__regmap_init_i2c(struct i2c_client *i2c, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__regmap_init_mdio(struct mdio_device *mdio_dev, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__regmap_init_sccb(struct i2c_client *i2c, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__regmap_init_slimbus(struct slim_device *slimbus, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__regmap_init_spi(struct spi_device *dev, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__regmap_init_spmi_base(struct spmi_device *dev, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__regmap_init_spmi_ext(struct spmi_device *dev, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__regmap_init_w1(struct device *w1_dev, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__regmap_init_mmio_clk(struct device *dev, const char *clk_id, + void __iomem *regs, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__regmap_init_ac97(struct snd_ac97 *ac97, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__regmap_init_sdw(struct sdw_slave *sdw, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__regmap_init_sdw_mbq(struct device *dev, struct sdw_slave *sdw, + const struct regmap_config *config, + const struct regmap_sdw_mbq_cfg *mbq_config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__regmap_init_spi_avmm(struct spi_device *spi, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__regmap_init_fsi(struct fsi_device *fsi_dev, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); + +struct regmap *__devm_regmap_init(struct device *dev, + const struct regmap_bus *bus, + void *bus_context, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__devm_regmap_init_i2c(struct i2c_client *i2c, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__devm_regmap_init_mdio(struct mdio_device *mdio_dev, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__devm_regmap_init_sccb(struct i2c_client *i2c, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__devm_regmap_init_spi(struct spi_device *dev, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__devm_regmap_init_spmi_base(struct spmi_device *dev, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__devm_regmap_init_spmi_ext(struct spmi_device *dev, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__devm_regmap_init_w1(struct device *w1_dev, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__devm_regmap_init_mmio_clk(struct device *dev, + const char *clk_id, + void __iomem *regs, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__devm_regmap_init_ac97(struct snd_ac97 *ac97, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__devm_regmap_init_sdw(struct sdw_slave *sdw, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__devm_regmap_init_sdw_mbq(struct device *dev, struct sdw_slave *sdw, + const struct regmap_config *config, + const struct regmap_sdw_mbq_cfg *mbq_config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__devm_regmap_init_slimbus(struct slim_device *slimbus, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__devm_regmap_init_i3c(struct i3c_device *i3c, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__devm_regmap_init_spi_avmm(struct spi_device *spi, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); +struct regmap *__devm_regmap_init_fsi(struct fsi_device *fsi_dev, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); + +/* + * Wrapper for regmap_init macros to include a unique lockdep key and name + * for each call. No-op if CONFIG_LOCKDEP is not set. + * + * @fn: Real function to call (in the form __[*_]regmap_init[_*]) + * @name: Config variable name (#config in the calling macro) + **/ +#ifdef CONFIG_LOCKDEP +#define __regmap_lockdep_wrapper(fn, name, ...) \ +( \ + ({ \ + static struct lock_class_key _key; \ + fn(__VA_ARGS__, &_key, \ + KBUILD_BASENAME ":" \ + __stringify(__LINE__) ":" \ + "(" name ")->lock"); \ + }) \ +) +#else +#define __regmap_lockdep_wrapper(fn, name, ...) fn(__VA_ARGS__, NULL, NULL) +#endif + +/** + * regmap_init() - Initialise register map + * + * @dev: Device that will be interacted with + * @bus: Bus-specific callbacks to use with device + * @bus_context: Data passed to bus-specific callbacks + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer to + * a struct regmap. This function should generally not be called + * directly, it should be called by bus-specific init functions. + */ +#define regmap_init(dev, bus, bus_context, config) \ + __regmap_lockdep_wrapper(__regmap_init, #config, \ + dev, bus, bus_context, config) +int regmap_attach_dev(struct device *dev, struct regmap *map, + const struct regmap_config *config); + +/** + * regmap_init_i2c() - Initialise register map + * + * @i2c: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer to + * a struct regmap. + */ +#define regmap_init_i2c(i2c, config) \ + __regmap_lockdep_wrapper(__regmap_init_i2c, #config, \ + i2c, config) + +/** + * regmap_init_mdio() - Initialise register map + * + * @mdio_dev: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer to + * a struct regmap. + */ +#define regmap_init_mdio(mdio_dev, config) \ + __regmap_lockdep_wrapper(__regmap_init_mdio, #config, \ + mdio_dev, config) + +/** + * regmap_init_sccb() - Initialise register map + * + * @i2c: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer to + * a struct regmap. + */ +#define regmap_init_sccb(i2c, config) \ + __regmap_lockdep_wrapper(__regmap_init_sccb, #config, \ + i2c, config) + +/** + * regmap_init_slimbus() - Initialise register map + * + * @slimbus: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer to + * a struct regmap. + */ +#define regmap_init_slimbus(slimbus, config) \ + __regmap_lockdep_wrapper(__regmap_init_slimbus, #config, \ + slimbus, config) + +/** + * regmap_init_spi() - Initialise register map + * + * @dev: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer to + * a struct regmap. + */ +#define regmap_init_spi(dev, config) \ + __regmap_lockdep_wrapper(__regmap_init_spi, #config, \ + dev, config) + +/** + * regmap_init_spmi_base() - Create regmap for the Base register space + * + * @dev: SPMI device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer to + * a struct regmap. + */ +#define regmap_init_spmi_base(dev, config) \ + __regmap_lockdep_wrapper(__regmap_init_spmi_base, #config, \ + dev, config) + +/** + * regmap_init_spmi_ext() - Create regmap for Ext register space + * + * @dev: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer to + * a struct regmap. + */ +#define regmap_init_spmi_ext(dev, config) \ + __regmap_lockdep_wrapper(__regmap_init_spmi_ext, #config, \ + dev, config) + +/** + * regmap_init_w1() - Initialise register map + * + * @w1_dev: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer to + * a struct regmap. + */ +#define regmap_init_w1(w1_dev, config) \ + __regmap_lockdep_wrapper(__regmap_init_w1, #config, \ + w1_dev, config) + +/** + * regmap_init_mmio_clk() - Initialise register map with register clock + * + * @dev: Device that will be interacted with + * @clk_id: register clock consumer ID + * @regs: Pointer to memory-mapped IO region + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer to + * a struct regmap. Implies 'fast_io'. + */ +#define regmap_init_mmio_clk(dev, clk_id, regs, config) \ + __regmap_lockdep_wrapper(__regmap_init_mmio_clk, #config, \ + dev, clk_id, regs, config) + +/** + * regmap_init_mmio() - Initialise register map * * @dev: Device that will be interacted with * @regs: Pointer to memory-mapped IO region * @config: Configuration for register map * * The return value will be an ERR_PTR() on error or a valid pointer to + * a struct regmap. Implies 'fast_io'. + */ +#define regmap_init_mmio(dev, regs, config) \ + regmap_init_mmio_clk(dev, NULL, regs, config) + +/** + * regmap_init_ac97() - Initialise AC'97 register map + * + * @ac97: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer to * a struct regmap. */ -static inline struct regmap *regmap_init_mmio(struct device *dev, - void __iomem *regs, - const struct regmap_config *config) -{ - return regmap_init_mmio_clk(dev, NULL, regs, config); -} +#define regmap_init_ac97(ac97, config) \ + __regmap_lockdep_wrapper(__regmap_init_ac97, #config, \ + ac97, config) +bool regmap_ac97_default_volatile(struct device *dev, unsigned int reg); + +/** + * regmap_init_sdw() - Initialise register map + * + * @sdw: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer to + * a struct regmap. + */ +#define regmap_init_sdw(sdw, config) \ + __regmap_lockdep_wrapper(__regmap_init_sdw, #config, \ + sdw, config) + +/** + * regmap_init_sdw_mbq() - Initialise register map + * + * @sdw: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer to + * a struct regmap. + */ +#define regmap_init_sdw_mbq(sdw, config) \ + __regmap_lockdep_wrapper(__regmap_init_sdw_mbq, #config, \ + &sdw->dev, sdw, config, NULL) + +/** + * regmap_init_sdw_mbq_cfg() - Initialise MBQ SDW register map with config + * + * @sdw: Device that will be interacted with + * @config: Configuration for register map + * @mbq_config: Properties for the MBQ registers + * + * The return value will be an ERR_PTR() on error or a valid pointer + * to a struct regmap. The regmap will be automatically freed by the + * device management code. + */ +#define regmap_init_sdw_mbq_cfg(dev, sdw, config, mbq_config) \ + __regmap_lockdep_wrapper(__regmap_init_sdw_mbq, #config, \ + dev, sdw, config, mbq_config) + +/** + * regmap_init_spi_avmm() - Initialize register map for Intel SPI Slave + * to AVMM Bus Bridge + * + * @spi: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer + * to a struct regmap. + */ +#define regmap_init_spi_avmm(spi, config) \ + __regmap_lockdep_wrapper(__regmap_init_spi_avmm, #config, \ + spi, config) + +/** + * regmap_init_fsi() - Initialise register map + * + * @fsi_dev: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer to + * a struct regmap. + */ +#define regmap_init_fsi(fsi_dev, config) \ + __regmap_lockdep_wrapper(__regmap_init_fsi, #config, fsi_dev, \ + config) + +/** + * devm_regmap_init() - Initialise managed register map + * + * @dev: Device that will be interacted with + * @bus: Bus-specific callbacks to use with device + * @bus_context: Data passed to bus-specific callbacks + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer + * to a struct regmap. This function should generally not be called + * directly, it should be called by bus-specific init functions. The + * map will be automatically freed by the device management code. + */ +#define devm_regmap_init(dev, bus, bus_context, config) \ + __regmap_lockdep_wrapper(__devm_regmap_init, #config, \ + dev, bus, bus_context, config) + +/** + * devm_regmap_init_i2c() - Initialise managed register map + * + * @i2c: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer + * to a struct regmap. The regmap will be automatically freed by the + * device management code. + */ +#define devm_regmap_init_i2c(i2c, config) \ + __regmap_lockdep_wrapper(__devm_regmap_init_i2c, #config, \ + i2c, config) + +/** + * devm_regmap_init_mdio() - Initialise managed register map + * + * @mdio_dev: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer + * to a struct regmap. The regmap will be automatically freed by the + * device management code. + */ +#define devm_regmap_init_mdio(mdio_dev, config) \ + __regmap_lockdep_wrapper(__devm_regmap_init_mdio, #config, \ + mdio_dev, config) + +/** + * devm_regmap_init_sccb() - Initialise managed register map + * + * @i2c: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer + * to a struct regmap. The regmap will be automatically freed by the + * device management code. + */ +#define devm_regmap_init_sccb(i2c, config) \ + __regmap_lockdep_wrapper(__devm_regmap_init_sccb, #config, \ + i2c, config) + +/** + * devm_regmap_init_spi() - Initialise register map + * + * @dev: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer + * to a struct regmap. The map will be automatically freed by the + * device management code. + */ +#define devm_regmap_init_spi(dev, config) \ + __regmap_lockdep_wrapper(__devm_regmap_init_spi, #config, \ + dev, config) + +/** + * devm_regmap_init_spmi_base() - Create managed regmap for Base register space + * + * @dev: SPMI device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer + * to a struct regmap. The regmap will be automatically freed by the + * device management code. + */ +#define devm_regmap_init_spmi_base(dev, config) \ + __regmap_lockdep_wrapper(__devm_regmap_init_spmi_base, #config, \ + dev, config) + +/** + * devm_regmap_init_spmi_ext() - Create managed regmap for Ext register space + * + * @dev: SPMI device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer + * to a struct regmap. The regmap will be automatically freed by the + * device management code. + */ +#define devm_regmap_init_spmi_ext(dev, config) \ + __regmap_lockdep_wrapper(__devm_regmap_init_spmi_ext, #config, \ + dev, config) + +/** + * devm_regmap_init_w1() - Initialise managed register map + * + * @w1_dev: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer + * to a struct regmap. The regmap will be automatically freed by the + * device management code. + */ +#define devm_regmap_init_w1(w1_dev, config) \ + __regmap_lockdep_wrapper(__devm_regmap_init_w1, #config, \ + w1_dev, config) +/** + * devm_regmap_init_mmio_clk() - Initialise managed register map with clock + * + * @dev: Device that will be interacted with + * @clk_id: register clock consumer ID + * @regs: Pointer to memory-mapped IO region + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer + * to a struct regmap. The regmap will be automatically freed by the + * device management code. Implies 'fast_io'. + */ +#define devm_regmap_init_mmio_clk(dev, clk_id, regs, config) \ + __regmap_lockdep_wrapper(__devm_regmap_init_mmio_clk, #config, \ + dev, clk_id, regs, config) /** - * devm_regmap_init_mmio(): Initialise managed register map + * devm_regmap_init_mmio() - Initialise managed register map * * @dev: Device that will be interacted with * @regs: Pointer to memory-mapped IO region @@ -358,40 +1158,207 @@ static inline struct regmap *regmap_init_mmio(struct device *dev, * * The return value will be an ERR_PTR() on error or a valid pointer * to a struct regmap. The regmap will be automatically freed by the + * device management code. Implies 'fast_io'. + */ +#define devm_regmap_init_mmio(dev, regs, config) \ + devm_regmap_init_mmio_clk(dev, NULL, regs, config) + +/** + * devm_regmap_init_ac97() - Initialise AC'97 register map + * + * @ac97: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer + * to a struct regmap. The regmap will be automatically freed by the * device management code. */ -static inline struct regmap *devm_regmap_init_mmio(struct device *dev, - void __iomem *regs, - const struct regmap_config *config) -{ - return devm_regmap_init_mmio_clk(dev, NULL, regs, config); -} +#define devm_regmap_init_ac97(ac97, config) \ + __regmap_lockdep_wrapper(__devm_regmap_init_ac97, #config, \ + ac97, config) + +/** + * devm_regmap_init_sdw() - Initialise managed register map + * + * @sdw: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer + * to a struct regmap. The regmap will be automatically freed by the + * device management code. + */ +#define devm_regmap_init_sdw(sdw, config) \ + __regmap_lockdep_wrapper(__devm_regmap_init_sdw, #config, \ + sdw, config) +/** + * devm_regmap_init_sdw_mbq() - Initialise managed register map + * + * @sdw: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer + * to a struct regmap. The regmap will be automatically freed by the + * device management code. + */ +#define devm_regmap_init_sdw_mbq(sdw, config) \ + __regmap_lockdep_wrapper(__devm_regmap_init_sdw_mbq, #config, \ + &sdw->dev, sdw, config, NULL) + +/** + * devm_regmap_init_sdw_mbq_cfg() - Initialise managed MBQ SDW register map with config + * + * @dev: Device that will be interacted with + * @sdw: SoundWire Device that will be interacted with + * @config: Configuration for register map + * @mbq_config: Properties for the MBQ registers + * + * The return value will be an ERR_PTR() on error or a valid pointer + * to a struct regmap. The regmap will be automatically freed by the + * device management code. + */ +#define devm_regmap_init_sdw_mbq_cfg(dev, sdw, config, mbq_config) \ + __regmap_lockdep_wrapper(__devm_regmap_init_sdw_mbq, \ + #config, dev, sdw, config, mbq_config) + +/** + * devm_regmap_init_slimbus() - Initialise managed register map + * + * @slimbus: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer + * to a struct regmap. The regmap will be automatically freed by the + * device management code. + */ +#define devm_regmap_init_slimbus(slimbus, config) \ + __regmap_lockdep_wrapper(__devm_regmap_init_slimbus, #config, \ + slimbus, config) + +/** + * devm_regmap_init_i3c() - Initialise managed register map + * + * @i3c: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer + * to a struct regmap. The regmap will be automatically freed by the + * device management code. + */ +#define devm_regmap_init_i3c(i3c, config) \ + __regmap_lockdep_wrapper(__devm_regmap_init_i3c, #config, \ + i3c, config) + +/** + * devm_regmap_init_spi_avmm() - Initialize register map for Intel SPI Slave + * to AVMM Bus Bridge + * + * @spi: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer + * to a struct regmap. The map will be automatically freed by the + * device management code. + */ +#define devm_regmap_init_spi_avmm(spi, config) \ + __regmap_lockdep_wrapper(__devm_regmap_init_spi_avmm, #config, \ + spi, config) + +/** + * devm_regmap_init_fsi() - Initialise managed register map + * + * @fsi_dev: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer + * to a struct regmap. The regmap will be automatically freed by the + * device management code. + */ +#define devm_regmap_init_fsi(fsi_dev, config) \ + __regmap_lockdep_wrapper(__devm_regmap_init_fsi, #config, \ + fsi_dev, config) + +int regmap_mmio_attach_clk(struct regmap *map, struct clk *clk); +void regmap_mmio_detach_clk(struct regmap *map); void regmap_exit(struct regmap *map); int regmap_reinit_cache(struct regmap *map, const struct regmap_config *config); struct regmap *dev_get_regmap(struct device *dev, const char *name); +struct device *regmap_get_device(struct regmap *map); int regmap_write(struct regmap *map, unsigned int reg, unsigned int val); +int regmap_write_async(struct regmap *map, unsigned int reg, unsigned int val); int regmap_raw_write(struct regmap *map, unsigned int reg, const void *val, size_t val_len); +int regmap_noinc_write(struct regmap *map, unsigned int reg, + const void *val, size_t val_len); int regmap_bulk_write(struct regmap *map, unsigned int reg, const void *val, size_t val_count); +int regmap_multi_reg_write(struct regmap *map, const struct reg_sequence *regs, + int num_regs); +int regmap_multi_reg_write_bypassed(struct regmap *map, + const struct reg_sequence *regs, + int num_regs); int regmap_raw_write_async(struct regmap *map, unsigned int reg, const void *val, size_t val_len); int regmap_read(struct regmap *map, unsigned int reg, unsigned int *val); +int regmap_read_bypassed(struct regmap *map, unsigned int reg, unsigned int *val); int regmap_raw_read(struct regmap *map, unsigned int reg, void *val, size_t val_len); +int regmap_noinc_read(struct regmap *map, unsigned int reg, + void *val, size_t val_len); int regmap_bulk_read(struct regmap *map, unsigned int reg, void *val, size_t val_count); -int regmap_update_bits(struct regmap *map, unsigned int reg, - unsigned int mask, unsigned int val); -int regmap_update_bits_check(struct regmap *map, unsigned int reg, - unsigned int mask, unsigned int val, - bool *change); +int regmap_multi_reg_read(struct regmap *map, const unsigned int *reg, void *val, + size_t val_count); +int regmap_update_bits_base(struct regmap *map, unsigned int reg, + unsigned int mask, unsigned int val, + bool *change, bool async, bool force); + +static inline int regmap_update_bits(struct regmap *map, unsigned int reg, + unsigned int mask, unsigned int val) +{ + return regmap_update_bits_base(map, reg, mask, val, NULL, false, false); +} + +static inline int regmap_update_bits_async(struct regmap *map, unsigned int reg, + unsigned int mask, unsigned int val) +{ + return regmap_update_bits_base(map, reg, mask, val, NULL, true, false); +} + +static inline int regmap_update_bits_check(struct regmap *map, unsigned int reg, + unsigned int mask, unsigned int val, + bool *change) +{ + return regmap_update_bits_base(map, reg, mask, val, + change, false, false); +} + +static inline int +regmap_update_bits_check_async(struct regmap *map, unsigned int reg, + unsigned int mask, unsigned int val, + bool *change) +{ + return regmap_update_bits_base(map, reg, mask, val, + change, true, false); +} + +static inline int regmap_write_bits(struct regmap *map, unsigned int reg, + unsigned int mask, unsigned int val) +{ + return regmap_update_bits_base(map, reg, mask, val, NULL, false, true); +} + int regmap_get_val_bytes(struct regmap *map); +int regmap_get_max_register(struct regmap *map); +int regmap_get_reg_stride(struct regmap *map); +bool regmap_might_sleep(struct regmap *map); int regmap_async_complete(struct regmap *map); bool regmap_can_raw_write(struct regmap *map); +size_t regmap_get_raw_read_max(struct regmap *map); +size_t regmap_get_raw_write_max(struct regmap *map); +void regcache_sort_defaults(struct reg_default *defaults, unsigned int ndefaults); int regcache_sync(struct regmap *map); int regcache_sync_region(struct regmap *map, unsigned int min, unsigned int max); @@ -400,12 +1367,15 @@ int regcache_drop_region(struct regmap *map, unsigned int min, void regcache_cache_only(struct regmap *map, bool enable); void regcache_cache_bypass(struct regmap *map, bool enable); void regcache_mark_dirty(struct regmap *map); +bool regcache_reg_cached(struct regmap *map, unsigned int reg); bool regmap_check_range_table(struct regmap *map, unsigned int reg, const struct regmap_access_table *table); -int regmap_register_patch(struct regmap *map, const struct reg_default *regs, +int regmap_register_patch(struct regmap *map, const struct reg_sequence *regs, int num_regs); +int regmap_parse_val(struct regmap *map, const void *buf, + unsigned int *val); static inline bool regmap_reg_in_range(unsigned int reg, const struct regmap_range *range) @@ -417,17 +1387,45 @@ bool regmap_reg_in_ranges(unsigned int reg, const struct regmap_range *ranges, unsigned int nranges); +static inline int regmap_set_bits(struct regmap *map, + unsigned int reg, unsigned int bits) +{ + return regmap_update_bits_base(map, reg, bits, bits, + NULL, false, false); +} + +static inline int regmap_clear_bits(struct regmap *map, + unsigned int reg, unsigned int bits) +{ + return regmap_update_bits_base(map, reg, bits, 0, NULL, false, false); +} + +static inline int regmap_assign_bits(struct regmap *map, unsigned int reg, + unsigned int bits, bool value) +{ + if (value) + return regmap_set_bits(map, reg, bits); + else + return regmap_clear_bits(map, reg, bits); +} + +int regmap_test_bits(struct regmap *map, unsigned int reg, unsigned int bits); + /** - * Description of an register field + * struct reg_field - Description of an register field * * @reg: Offset of the register within the regmap bank * @lsb: lsb of the register field. - * @reg: msb of the register field. + * @msb: msb of the register field. + * @id_size: port size if it has some ports + * @id_offset: address offset for each ports */ struct reg_field { unsigned int reg; unsigned int lsb; unsigned int msb; + unsigned int id_size; + unsigned int id_offset; }; #define REG_FIELD(_reg, _lsb, _msb) { \ @@ -436,6 +1434,14 @@ struct reg_field { .msb = _msb, \ } +#define REG_FIELD_ID(_reg, _lsb, _msb, _size, _offset) { \ + .reg = _reg, \ + .lsb = _lsb, \ + .msb = _msb, \ + .id_size = _size, \ + .id_offset = _offset, \ + } + struct regmap_field *regmap_field_alloc(struct regmap *regmap, struct reg_field reg_field); void regmap_field_free(struct regmap_field *field); @@ -444,63 +1450,324 @@ struct regmap_field *devm_regmap_field_alloc(struct device *dev, struct regmap *regmap, struct reg_field reg_field); void devm_regmap_field_free(struct device *dev, struct regmap_field *field); +int regmap_field_bulk_alloc(struct regmap *regmap, + struct regmap_field **rm_field, + const struct reg_field *reg_field, + int num_fields); +void regmap_field_bulk_free(struct regmap_field *field); +int devm_regmap_field_bulk_alloc(struct device *dev, struct regmap *regmap, + struct regmap_field **field, + const struct reg_field *reg_field, + int num_fields); +void devm_regmap_field_bulk_free(struct device *dev, + struct regmap_field *field); + int regmap_field_read(struct regmap_field *field, unsigned int *val); -int regmap_field_write(struct regmap_field *field, unsigned int val); +int regmap_field_update_bits_base(struct regmap_field *field, + unsigned int mask, unsigned int val, + bool *change, bool async, bool force); +int regmap_fields_read(struct regmap_field *field, unsigned int id, + unsigned int *val); +int regmap_fields_update_bits_base(struct regmap_field *field, unsigned int id, + unsigned int mask, unsigned int val, + bool *change, bool async, bool force); + +static inline int regmap_field_write(struct regmap_field *field, + unsigned int val) +{ + return regmap_field_update_bits_base(field, ~0, val, + NULL, false, false); +} + +static inline int regmap_field_force_write(struct regmap_field *field, + unsigned int val) +{ + return regmap_field_update_bits_base(field, ~0, val, NULL, false, true); +} + +static inline int regmap_field_update_bits(struct regmap_field *field, + unsigned int mask, unsigned int val) +{ + return regmap_field_update_bits_base(field, mask, val, + NULL, false, false); +} + +static inline int regmap_field_set_bits(struct regmap_field *field, + unsigned int bits) +{ + return regmap_field_update_bits_base(field, bits, bits, NULL, false, + false); +} + +static inline int regmap_field_clear_bits(struct regmap_field *field, + unsigned int bits) +{ + return regmap_field_update_bits_base(field, bits, 0, NULL, false, + false); +} + +int regmap_field_test_bits(struct regmap_field *field, unsigned int bits); + +static inline int +regmap_field_force_update_bits(struct regmap_field *field, + unsigned int mask, unsigned int val) +{ + return regmap_field_update_bits_base(field, mask, val, + NULL, false, true); +} + +static inline int regmap_fields_write(struct regmap_field *field, + unsigned int id, unsigned int val) +{ + return regmap_fields_update_bits_base(field, id, ~0, val, + NULL, false, false); +} + +static inline int regmap_fields_force_write(struct regmap_field *field, + unsigned int id, unsigned int val) +{ + return regmap_fields_update_bits_base(field, id, ~0, val, + NULL, false, true); +} + +static inline int +regmap_fields_update_bits(struct regmap_field *field, unsigned int id, + unsigned int mask, unsigned int val) +{ + return regmap_fields_update_bits_base(field, id, mask, val, + NULL, false, false); +} + +static inline int +regmap_fields_force_update_bits(struct regmap_field *field, unsigned int id, + unsigned int mask, unsigned int val) +{ + return regmap_fields_update_bits_base(field, id, mask, val, + NULL, false, true); +} + +/** + * struct regmap_irq_type - IRQ type definitions. + * + * @type_reg_offset: Offset register for the irq type setting. + * @type_rising_val: Register value to configure RISING type irq. + * @type_falling_val: Register value to configure FALLING type irq. + * @type_level_low_val: Register value to configure LEVEL_LOW type irq. + * @type_level_high_val: Register value to configure LEVEL_HIGH type irq. + * @types_supported: logical OR of IRQ_TYPE_* flags indicating supported types. + */ +struct regmap_irq_type { + unsigned int type_reg_offset; + unsigned int type_reg_mask; + unsigned int type_rising_val; + unsigned int type_falling_val; + unsigned int type_level_low_val; + unsigned int type_level_high_val; + unsigned int types_supported; +}; /** - * Description of an IRQ for the generic regmap irq_chip. + * struct regmap_irq - Description of an IRQ for the generic regmap irq_chip. * * @reg_offset: Offset of the status/mask register within the bank * @mask: Mask used to flag/control the register. + * @type: IRQ trigger type setting details if supported. */ struct regmap_irq { unsigned int reg_offset; unsigned int mask; + struct regmap_irq_type type; +}; + +#define REGMAP_IRQ_REG(_irq, _off, _mask) \ + [_irq] = { .reg_offset = (_off), .mask = (_mask) } + +#define REGMAP_IRQ_REG_LINE(_id, _reg_bits) \ + [_id] = { \ + .mask = BIT((_id) % (_reg_bits)), \ + .reg_offset = (_id) / (_reg_bits), \ + } + +#define REGMAP_IRQ_MAIN_REG_OFFSET(arr) \ + { .num_regs = ARRAY_SIZE((arr)), .offset = &(arr)[0] } + +struct regmap_irq_sub_irq_map { + unsigned int num_regs; + unsigned int *offset; }; +struct regmap_irq_chip_data; + /** - * Description of a generic regmap irq_chip. This is not intended to - * handle every possible interrupt controller, but it should handle a - * substantial proportion of those that are found in the wild. + * struct regmap_irq_chip - Description of a generic regmap irq_chip. * * @name: Descriptive name for IRQ controller. + * @domain_suffix: Name suffix to be appended to end of IRQ domain name. Needed + * when multiple regmap-IRQ controllers are created from same + * device. + * + * @main_status: Base main status register address. For chips which have + * interrupts arranged in separate sub-irq blocks with own IRQ + * registers and which have a main IRQ registers indicating + * sub-irq blocks with unhandled interrupts. For such chips fill + * sub-irq register information in status_base, mask_base and + * ack_base. + * @num_main_status_bits: Should be given to chips where number of meaningfull + * main status bits differs from num_regs. + * @sub_reg_offsets: arrays of mappings from main register bits to sub irq + * registers. First item in array describes the registers + * for first main status bit. Second array for second bit etc. + * Offset is given as sub register status offset to + * status_base. Should contain num_regs arrays. + * Can be provided for chips with more complex mapping than + * 1.st bit to 1.st sub-reg, 2.nd bit to 2.nd sub-reg, ... + * @num_main_regs: Number of 'main status' irq registers for chips which have + * main_status set. * * @status_base: Base status register address. - * @mask_base: Base mask register address. - * @ack_base: Base ack address. If zero then the chip is clear on read. + * @mask_base: Base mask register address. Mask bits are set to 1 when an + * interrupt is masked, 0 when unmasked. + * @unmask_base: Base unmask register address. Unmask bits are set to 1 when + * an interrupt is unmasked and 0 when masked. + * @ack_base: Base ack address. If zero then the chip is clear on read. + * Using zero value is possible with @use_ack bit. * @wake_base: Base address for wake enables. If zero unsupported. + * @config_base: Base address for IRQ type config regs. If null unsupported. * @irq_reg_stride: Stride to use for chips where registers are not contiguous. + * @init_ack_masked: Ack all masked interrupts once during initalization. + * @mask_unmask_non_inverted: Controls mask bit inversion for chips that set + * both @mask_base and @unmask_base. If false, mask and unmask bits are + * inverted (which is deprecated behavior); if true, bits will not be + * inverted and the registers keep their normal behavior. Note that if + * you use only one of @mask_base or @unmask_base, this flag has no + * effect and is unnecessary. Any new drivers that set both @mask_base + * and @unmask_base should set this to true to avoid relying on the + * deprecated behavior. + * @use_ack: Use @ack register even if it is zero. + * @ack_invert: Inverted ack register: cleared bits for ack. + * @clear_ack: Use this to set 1 and 0 or vice-versa to clear interrupts. + * @status_invert: Inverted status register: cleared bits are active interrupts. + * @status_is_level: Status register is actuall signal level: Xor status + * register with previous value to get active interrupts. + * @wake_invert: Inverted wake register: cleared bits are wake disabled. + * @type_in_mask: Use the mask registers for controlling irq type. Use this if + * the hardware provides separate bits for rising/falling edge + * or low/high level interrupts and they should be combined into + * a single logical interrupt. Use &struct regmap_irq_type data + * to define the mask bit for each irq type. + * @clear_on_unmask: For chips with interrupts cleared on read: read the status + * registers before unmasking interrupts to clear any bits + * set when they were masked. * @runtime_pm: Hold a runtime PM lock on the device when accessing it. + * @no_status: No status register: all interrupts assumed generated by device. * * @num_regs: Number of registers in each control bank. + * * @irqs: Descriptors for individual IRQs. Interrupt numbers are * assigned based on the index in the array of the interrupt. * @num_irqs: Number of descriptors. + * @num_config_bases: Number of config base registers. + * @num_config_regs: Number of config registers for each config base register. + * + * @handle_pre_irq: Driver specific callback to handle interrupt from device + * before regmap_irq_handler process the interrupts. + * @handle_post_irq: Driver specific callback to handle interrupt from device + * after handling the interrupts in regmap_irq_handler(). + * @handle_mask_sync: Callback used to handle IRQ mask syncs. The index will be + * in the range [0, num_regs) + * @set_type_config: Callback used for configuring irq types. + * @get_irq_reg: Callback for mapping (base register, index) pairs to register + * addresses. The base register will be one of @status_base, + * @mask_base, etc., @main_status, or any of @config_base. + * The index will be in the range [0, num_main_regs[ for the + * main status base, [0, num_config_regs[ for any config + * register base, and [0, num_regs[ for any other base. + * If unspecified then regmap_irq_get_irq_reg_linear() is used. + * @irq_drv_data: Driver specific IRQ data which is passed as parameter when + * driver specific pre/post interrupt handler is called. + * + * This is not intended to handle every possible interrupt controller, but + * it should handle a substantial proportion of those that are found in the + * wild. */ struct regmap_irq_chip { const char *name; + const char *domain_suffix; + + unsigned int main_status; + unsigned int num_main_status_bits; + const struct regmap_irq_sub_irq_map *sub_reg_offsets; + int num_main_regs; unsigned int status_base; unsigned int mask_base; + unsigned int unmask_base; unsigned int ack_base; unsigned int wake_base; + const unsigned int *config_base; unsigned int irq_reg_stride; - unsigned int mask_invert; - unsigned int wake_invert; - bool runtime_pm; + unsigned int init_ack_masked:1; + unsigned int mask_unmask_non_inverted:1; + unsigned int use_ack:1; + unsigned int ack_invert:1; + unsigned int clear_ack:1; + unsigned int status_invert:1; + unsigned int status_is_level:1; + unsigned int wake_invert:1; + unsigned int type_in_mask:1; + unsigned int clear_on_unmask:1; + unsigned int runtime_pm:1; + unsigned int no_status:1; int num_regs; const struct regmap_irq *irqs; int num_irqs; + + int num_config_bases; + int num_config_regs; + + int (*handle_pre_irq)(void *irq_drv_data); + int (*handle_post_irq)(void *irq_drv_data); + int (*handle_mask_sync)(int index, unsigned int mask_buf_def, + unsigned int mask_buf, void *irq_drv_data); + int (*set_type_config)(unsigned int **buf, unsigned int type, + const struct regmap_irq *irq_data, int idx, + void *irq_drv_data); + unsigned int (*get_irq_reg)(struct regmap_irq_chip_data *data, + unsigned int base, int index); + void *irq_drv_data; }; -struct regmap_irq_chip_data; +unsigned int regmap_irq_get_irq_reg_linear(struct regmap_irq_chip_data *data, + unsigned int base, int index); +int regmap_irq_set_type_config_simple(unsigned int **buf, unsigned int type, + const struct regmap_irq *irq_data, + int idx, void *irq_drv_data); int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags, int irq_base, const struct regmap_irq_chip *chip, struct regmap_irq_chip_data **data); +int regmap_add_irq_chip_fwnode(struct fwnode_handle *fwnode, + struct regmap *map, int irq, + int irq_flags, int irq_base, + const struct regmap_irq_chip *chip, + struct regmap_irq_chip_data **data); void regmap_del_irq_chip(int irq, struct regmap_irq_chip_data *data); + +int devm_regmap_add_irq_chip(struct device *dev, struct regmap *map, int irq, + int irq_flags, int irq_base, + const struct regmap_irq_chip *chip, + struct regmap_irq_chip_data **data); +int devm_regmap_add_irq_chip_fwnode(struct device *dev, + struct fwnode_handle *fwnode, + struct regmap *map, int irq, + int irq_flags, int irq_base, + const struct regmap_irq_chip *chip, + struct regmap_irq_chip_data **data); +void devm_regmap_del_irq_chip(struct device *dev, int irq, + struct regmap_irq_chip_data *data); + int regmap_irq_chip_get_base(struct regmap_irq_chip_data *data); int regmap_irq_get_virq(struct regmap_irq_chip_data *data, int irq); struct irq_domain *regmap_irq_get_domain(struct regmap_irq_chip_data *data); @@ -521,6 +1788,13 @@ static inline int regmap_write(struct regmap *map, unsigned int reg, return -EINVAL; } +static inline int regmap_write_async(struct regmap *map, unsigned int reg, + unsigned int val) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + static inline int regmap_raw_write(struct regmap *map, unsigned int reg, const void *val, size_t val_len) { @@ -535,6 +1809,13 @@ static inline int regmap_raw_write_async(struct regmap *map, unsigned int reg, return -EINVAL; } +static inline int regmap_noinc_write(struct regmap *map, unsigned int reg, + const void *val, size_t val_len) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + static inline int regmap_bulk_write(struct regmap *map, unsigned int reg, const void *val, size_t val_count) { @@ -549,6 +1830,13 @@ static inline int regmap_read(struct regmap *map, unsigned int reg, return -EINVAL; } +static inline int regmap_read_bypassed(struct regmap *map, unsigned int reg, + unsigned int *val) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + static inline int regmap_raw_read(struct regmap *map, unsigned int reg, void *val, size_t val_len) { @@ -556,6 +1844,13 @@ static inline int regmap_raw_read(struct regmap *map, unsigned int reg, return -EINVAL; } +static inline int regmap_noinc_read(struct regmap *map, unsigned int reg, + void *val, size_t val_len) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + static inline int regmap_bulk_read(struct regmap *map, unsigned int reg, void *val, size_t val_count) { @@ -563,6 +1858,59 @@ static inline int regmap_bulk_read(struct regmap *map, unsigned int reg, return -EINVAL; } +static inline int regmap_update_bits_base(struct regmap *map, unsigned int reg, + unsigned int mask, unsigned int val, + bool *change, bool async, bool force) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_set_bits(struct regmap *map, + unsigned int reg, unsigned int bits) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_clear_bits(struct regmap *map, + unsigned int reg, unsigned int bits) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_assign_bits(struct regmap *map, unsigned int reg, + unsigned int bits, bool value) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_test_bits(struct regmap *map, + unsigned int reg, unsigned int bits) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_field_update_bits_base(struct regmap_field *field, + unsigned int mask, unsigned int val, + bool *change, bool async, bool force) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_fields_update_bits_base(struct regmap_field *field, + unsigned int id, + unsigned int mask, unsigned int val, + bool *change, bool async, bool force) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + static inline int regmap_update_bits(struct regmap *map, unsigned int reg, unsigned int mask, unsigned int val) { @@ -570,8 +1918,14 @@ static inline int regmap_update_bits(struct regmap *map, unsigned int reg, return -EINVAL; } -static inline int regmap_update_bits_check(struct regmap *map, - unsigned int reg, +static inline int regmap_update_bits_async(struct regmap *map, unsigned int reg, + unsigned int mask, unsigned int val) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_update_bits_check(struct regmap *map, unsigned int reg, unsigned int mask, unsigned int val, bool *change) { @@ -579,12 +1933,132 @@ static inline int regmap_update_bits_check(struct regmap *map, return -EINVAL; } +static inline int +regmap_update_bits_check_async(struct regmap *map, unsigned int reg, + unsigned int mask, unsigned int val, + bool *change) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_write_bits(struct regmap *map, unsigned int reg, + unsigned int mask, unsigned int val) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_field_write(struct regmap_field *field, + unsigned int val) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_field_force_write(struct regmap_field *field, + unsigned int val) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_field_update_bits(struct regmap_field *field, + unsigned int mask, unsigned int val) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int +regmap_field_force_update_bits(struct regmap_field *field, + unsigned int mask, unsigned int val) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_field_set_bits(struct regmap_field *field, + unsigned int bits) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_field_clear_bits(struct regmap_field *field, + unsigned int bits) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_field_test_bits(struct regmap_field *field, + unsigned int bits) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_fields_write(struct regmap_field *field, + unsigned int id, unsigned int val) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_fields_force_write(struct regmap_field *field, + unsigned int id, unsigned int val) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int +regmap_fields_update_bits(struct regmap_field *field, unsigned int id, + unsigned int mask, unsigned int val) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int +regmap_fields_force_update_bits(struct regmap_field *field, unsigned int id, + unsigned int mask, unsigned int val) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + static inline int regmap_get_val_bytes(struct regmap *map) { WARN_ONCE(1, "regmap API is disabled"); return -EINVAL; } +static inline int regmap_get_max_register(struct regmap *map) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_get_reg_stride(struct regmap *map) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline bool regmap_might_sleep(struct regmap *map) +{ + WARN_ONCE(1, "regmap API is disabled"); + return true; +} + +static inline void regcache_sort_defaults(struct reg_default *defaults, + unsigned int ndefaults) +{ + WARN_ONCE(1, "regmap API is disabled"); +} + static inline int regcache_sync(struct regmap *map) { WARN_ONCE(1, "regmap API is disabled"); @@ -626,19 +2100,32 @@ static inline void regmap_async_complete(struct regmap *map) } static inline int regmap_register_patch(struct regmap *map, - const struct reg_default *regs, + const struct reg_sequence *regs, int num_regs) { WARN_ONCE(1, "regmap API is disabled"); return -EINVAL; } +static inline int regmap_parse_val(struct regmap *map, const void *buf, + unsigned int *val) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + static inline struct regmap *dev_get_regmap(struct device *dev, const char *name) { return NULL; } +static inline struct device *regmap_get_device(struct regmap *map) +{ + WARN_ONCE(1, "regmap API is disabled"); + return NULL; +} + #endif #endif |