diff options
Diffstat (limited to 'include/linux/regulator/machine.h')
| -rw-r--r-- | include/linux/regulator/machine.h | 25 |
1 files changed, 21 insertions, 4 deletions
diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index 621b7f4a3639..1fc440c5c4c7 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -49,6 +49,13 @@ struct regulator; #define DISABLE_IN_SUSPEND 1 #define ENABLE_IN_SUSPEND 2 +/* + * Default time window (in milliseconds) following a critical under-voltage + * event during which less critical actions can be safely carried out by the + * system. + */ +#define REGULATOR_DEF_UV_LESS_CRITICAL_WINDOW_MS 10 + /* Regulator active discharge flags */ enum regulator_active_discharge { REGULATOR_ACTIVE_DISCHARGE_DEFAULT, @@ -106,6 +113,7 @@ struct notification_limit { * @min_uA: Smallest current consumers may set. * @max_uA: Largest current consumers may set. * @ilim_uA: Maximum input current. + * @pw_budget_mW: Power budget for the regulator in mW. * @system_load: Load that isn't captured by any consumer requests. * * @over_curr_limits: Limits for acting on over current. @@ -127,6 +135,8 @@ struct notification_limit { * @ramp_disable: Disable ramp delay when initialising or when setting voltage. * @soft_start: Enable soft start so that voltage ramps slowly. * @pull_down: Enable pull down when regulator is disabled. + * @system_critical: Set if the regulator is critical to system stability or + * functionality. * @over_current_protection: Auto disable on over current event. * * @over_current_detection: Configure over current limits. @@ -153,6 +163,13 @@ struct notification_limit { * regulator_active_discharge values are used for * initialisation. * @enable_time: Turn-on time of the rails (unit: microseconds) + * @uv_less_critical_window_ms: Specifies the time window (in milliseconds) + * following a critical under-voltage (UV) event + * during which less critical actions can be + * safely carried out by the system (for example + * logging). After this time window more critical + * actions should be done (for example prevent + * HW damage). */ struct regulation_constraints { @@ -169,6 +186,7 @@ struct regulation_constraints { int max_uA; int ilim_uA; + int pw_budget_mW; int system_load; /* used for coupled regulators */ @@ -204,6 +222,7 @@ struct regulation_constraints { unsigned int settling_time_up; unsigned int settling_time_down; unsigned int enable_time; + unsigned int uv_less_critical_window_ms; unsigned int active_discharge; @@ -214,6 +233,7 @@ struct regulation_constraints { unsigned ramp_disable:1; /* disable ramp delay */ unsigned soft_start:1; /* ramp voltage slowly */ unsigned pull_down:1; /* pull down resistor when regulator off */ + unsigned system_critical:1; /* critical to system stability */ unsigned over_current_protection:1; /* auto disable on over current */ unsigned over_current_detection:1; /* notify on over current */ unsigned over_voltage_detection:1; /* notify on over voltage */ @@ -255,8 +275,6 @@ struct regulator_consumer_supply { * be usable. * @num_consumer_supplies: Number of consumer device supplies. * @consumer_supplies: Consumer device supply configuration. - * - * @regulator_init: Callback invoked when the regulator has been registered. * @driver_data: Data passed to regulator_init. */ struct regulator_init_data { @@ -267,8 +285,7 @@ struct regulator_init_data { int num_consumer_supplies; struct regulator_consumer_supply *consumer_supplies; - /* optional regulator machine specific init */ - int (*regulator_init)(void *driver_data); + /* optional regulator machine specific data */ void *driver_data; /* core does not touch this */ }; |