diff options
Diffstat (limited to 'include/linux/soc/mediatek/mtk-cmdq.h')
| -rw-r--r-- | include/linux/soc/mediatek/mtk-cmdq.h | 272 |
1 files changed, 254 insertions, 18 deletions
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h index 2b498f4f3946..0c3906e8ad19 100644 --- a/include/linux/soc/mediatek/mtk-cmdq.h +++ b/include/linux/soc/mediatek/mtk-cmdq.h @@ -14,8 +14,42 @@ #define CMDQ_ADDR_HIGH(addr) ((u32)(((addr) >> 16) & GENMASK(31, 0))) #define CMDQ_ADDR_LOW(addr) ((u16)(addr) | BIT(1)) +/* + * Every cmdq thread has its own SPRs (Specific Purpose Registers), + * so there are 4 * N (threads) SPRs in GCE that shares the same indexes below. + */ +#define CMDQ_THR_SPR_IDX0 (0) +#define CMDQ_THR_SPR_IDX1 (1) +#define CMDQ_THR_SPR_IDX2 (2) +#define CMDQ_THR_SPR_IDX3 (3) + struct cmdq_pkt; +enum cmdq_logic_op { + CMDQ_LOGIC_ASSIGN = 0, + CMDQ_LOGIC_ADD = 1, + CMDQ_LOGIC_SUBTRACT = 2, + CMDQ_LOGIC_MULTIPLY = 3, + CMDQ_LOGIC_XOR = 8, + CMDQ_LOGIC_NOT = 9, + CMDQ_LOGIC_OR = 10, + CMDQ_LOGIC_AND = 11, + CMDQ_LOGIC_LEFT_SHIFT = 12, + CMDQ_LOGIC_RIGHT_SHIFT = 13, + CMDQ_LOGIC_MAX, +}; + +struct cmdq_operand { + /* register type */ + bool reg; + union { + /* index */ + u16 idx; + /* value */ + u16 value; + }; +}; + struct cmdq_client_reg { u8 subsys; u16 offset; @@ -27,6 +61,8 @@ struct cmdq_client { struct mbox_chan *chan; }; +#if IS_ENABLED(CONFIG_MTK_CMDQ) + /** * cmdq_dev_get_client_reg() - parse cmdq client reg from the device * node of CMDQ client @@ -60,17 +96,19 @@ void cmdq_mbox_destroy(struct cmdq_client *client); /** * cmdq_pkt_create() - create a CMDQ packet * @client: the CMDQ mailbox client + * @pkt: the CMDQ packet * @size: required CMDQ buffer size * - * Return: CMDQ packet pointer + * Return: 0 for success; else the error code is returned */ -struct cmdq_pkt *cmdq_pkt_create(struct cmdq_client *client, size_t size); +int cmdq_pkt_create(struct cmdq_client *client, struct cmdq_pkt *pkt, size_t size); /** * cmdq_pkt_destroy() - destroy the CMDQ packet + * @client: the CMDQ mailbox client * @pkt: the CMDQ packet */ -void cmdq_pkt_destroy(struct cmdq_pkt *pkt); +void cmdq_pkt_destroy(struct cmdq_client *client, struct cmdq_pkt *pkt); /** * cmdq_pkt_write() - append write command to the CMDQ packet @@ -172,6 +210,18 @@ int cmdq_pkt_write_s_mask_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx, u16 addr_low, u32 value, u32 mask); /** + * cmdq_pkt_mem_move() - append memory move command to the CMDQ packet + * @pkt: the CMDQ packet + * @src_addr: source address + * @dst_addr: destination address + * + * Appends a CMDQ command to copy the value found in `src_addr` to `dst_addr`. + * + * Return: 0 for success; else the error code is returned + */ +int cmdq_pkt_mem_move(struct cmdq_pkt *pkt, dma_addr_t src_addr, dma_addr_t dst_addr); + +/** * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet * @pkt: the CMDQ packet * @event: the desired event type to wait @@ -182,6 +232,21 @@ int cmdq_pkt_write_s_mask_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx, int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event, bool clear); /** + * cmdq_pkt_acquire_event() - append acquire event command to the CMDQ packet + * @pkt: the CMDQ packet + * @event: the desired event to be acquired + * + * User can use cmdq_pkt_acquire_event() as `mutex_lock` and cmdq_pkt_clear_event() + * as `mutex_unlock` to protect some `critical section` instructions between them. + * cmdq_pkt_acquire_event() would wait for event to be cleared. + * After event is cleared by cmdq_pkt_clear_event in other GCE threads, + * cmdq_pkt_acquire_event() would set event and keep executing next instruction. + * + * Return: 0 for success; else the error code is returned + */ +int cmdq_pkt_acquire_event(struct cmdq_pkt *pkt, u16 event); + +/** * cmdq_pkt_clear_event() - append clear event command to the CMDQ packet * @pkt: the CMDQ packet * @event: the desired event to be cleared @@ -233,6 +298,23 @@ int cmdq_pkt_poll_mask(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value, u32 mask); /** + * cmdq_pkt_logic_command() - Append logic command to the CMDQ packet, ask GCE to + * execute an instruction that store the result of logic operation + * with left and right operand into result_reg_idx. + * @pkt: the CMDQ packet + * @result_reg_idx: SPR index that store operation result of left_operand and right_operand + * @left_operand: left operand + * @s_op: the logic operator enum + * @right_operand: right operand + * + * Return: 0 for success; else the error code is returned + */ +int cmdq_pkt_logic_command(struct cmdq_pkt *pkt, u16 result_reg_idx, + struct cmdq_operand *left_operand, + enum cmdq_logic_op s_op, + struct cmdq_operand *right_operand); + +/** * cmdq_pkt_assign() - Append logic assign command to the CMDQ packet, ask GCE * to execute an instruction that set a constant value into * internal register and use as value, mask or address in @@ -246,35 +328,189 @@ int cmdq_pkt_poll_mask(struct cmdq_pkt *pkt, u8 subsys, int cmdq_pkt_assign(struct cmdq_pkt *pkt, u16 reg_idx, u32 value); /** - * cmdq_pkt_jump() - Append jump command to the CMDQ packet, ask GCE - * to execute an instruction that change current thread PC to - * a physical address which should contains more instruction. + * cmdq_pkt_poll_addr() - Append blocking POLL command to CMDQ packet + * @pkt: the CMDQ packet + * @addr: the hardware register address + * @value: the specified target register value + * @mask: the specified target register mask + * + * Appends a polling (POLL) command to the CMDQ packet and asks the GCE + * to execute an instruction that checks for the specified `value` (with + * or without `mask`) to appear in the specified hardware register `addr`. + * All GCE threads will be blocked by this instruction. + * + * Return: 0 for success or negative error code + */ +int cmdq_pkt_poll_addr(struct cmdq_pkt *pkt, dma_addr_t addr, u32 value, u32 mask); + +/** + * cmdq_pkt_jump_abs() - Append jump command to the CMDQ packet, ask GCE + * to execute an instruction that change current thread + * PC to a absolute physical address which should + * contains more instruction. * @pkt: the CMDQ packet - * @addr: physical address of target instruction buffer + * @addr: absolute physical address of target instruction buffer + * @shift_pa: shift bits of physical address in CMDQ instruction. This value + * is got by cmdq_get_shift_pa(). * * Return: 0 for success; else the error code is returned */ -int cmdq_pkt_jump(struct cmdq_pkt *pkt, dma_addr_t addr); +int cmdq_pkt_jump_abs(struct cmdq_pkt *pkt, dma_addr_t addr, u8 shift_pa); + +/* This wrapper has to be removed after all users migrated to jump_abs */ +static inline int cmdq_pkt_jump(struct cmdq_pkt *pkt, dma_addr_t addr, u8 shift_pa) +{ + return cmdq_pkt_jump_abs(pkt, addr, shift_pa); +} /** - * cmdq_pkt_finalize() - Append EOC and jump command to pkt. + * cmdq_pkt_jump_rel() - Append jump command to the CMDQ packet, ask GCE + * to execute an instruction that change current thread + * PC to a physical address with relative offset. The + * target address should contains more instruction. * @pkt: the CMDQ packet + * @offset: relative offset of target instruction buffer from current PC. + * @shift_pa: shift bits of physical address in CMDQ instruction. This value + * is got by cmdq_get_shift_pa(). * * Return: 0 for success; else the error code is returned */ -int cmdq_pkt_finalize(struct cmdq_pkt *pkt); +int cmdq_pkt_jump_rel(struct cmdq_pkt *pkt, s32 offset, u8 shift_pa); /** - * cmdq_pkt_flush_async() - trigger CMDQ to asynchronously execute the CMDQ - * packet and call back at the end of done packet - * @pkt: the CMDQ packet + * cmdq_pkt_eoc() - Append EOC and ask GCE to generate an IRQ at end of execution + * @pkt: The CMDQ packet * - * Return: 0 for success; else the error code is returned + * Appends an End Of Code (EOC) command to the CMDQ packet and asks the GCE + * to generate an interrupt at the end of the execution of all commands in + * the pipeline. + * The EOC command is usually appended to the end of the pipeline to notify + * that all commands are done. * - * Trigger CMDQ to asynchronously execute the CMDQ packet and call back - * at the end of done packet. Note that this is an ASYNC function. When the - * function returned, it may or may not be finished. + * Return: 0 for success or negative error number */ -int cmdq_pkt_flush_async(struct cmdq_pkt *pkt); +int cmdq_pkt_eoc(struct cmdq_pkt *pkt); + +#else /* IS_ENABLED(CONFIG_MTK_CMDQ) */ + +static inline int cmdq_dev_get_client_reg(struct device *dev, + struct cmdq_client_reg *client_reg, int idx) +{ + return -ENODEV; +} + +static inline struct cmdq_client *cmdq_mbox_create(struct device *dev, int index) +{ + return ERR_PTR(-EINVAL); +} + +static inline void cmdq_mbox_destroy(struct cmdq_client *client) { } + +static inline int cmdq_pkt_create(struct cmdq_client *client, struct cmdq_pkt *pkt, size_t size) +{ + return -EINVAL; +} + +static inline void cmdq_pkt_destroy(struct cmdq_client *client, struct cmdq_pkt *pkt) { } + +static inline int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value) +{ + return -ENOENT; +} + +static inline int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys, + u16 offset, u32 value, u32 mask) +{ + return -ENOENT; +} + +static inline int cmdq_pkt_read_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx, + u16 addr_low, u16 reg_idx) +{ + return -ENOENT; +} + +static inline int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx, + u16 addr_low, u16 src_reg_idx) +{ + return -ENOENT; +} + +static inline int cmdq_pkt_write_s_mask(struct cmdq_pkt *pkt, u16 high_addr_reg_idx, + u16 addr_low, u16 src_reg_idx, u32 mask) +{ + return -ENOENT; +} + +static inline int cmdq_pkt_write_s_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx, + u16 addr_low, u32 value) +{ + return -ENOENT; +} + +static inline int cmdq_pkt_write_s_mask_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx, + u16 addr_low, u32 value, u32 mask) +{ + return -ENOENT; +} + +static inline int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event, bool clear) +{ + return -EINVAL; +} + +static inline int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u16 event) +{ + return -EINVAL; +} + +static inline int cmdq_pkt_set_event(struct cmdq_pkt *pkt, u16 event) +{ + return -EINVAL; +} + +static inline int cmdq_pkt_poll(struct cmdq_pkt *pkt, u8 subsys, + u16 offset, u32 value) +{ + return -EINVAL; +} + +static inline int cmdq_pkt_poll_mask(struct cmdq_pkt *pkt, u8 subsys, + u16 offset, u32 value, u32 mask) +{ + return -EINVAL; +} + +static inline int cmdq_pkt_assign(struct cmdq_pkt *pkt, u16 reg_idx, u32 value) +{ + return -EINVAL; +} + +static inline int cmdq_pkt_poll_addr(struct cmdq_pkt *pkt, dma_addr_t addr, u32 value, u32 mask) +{ + return -EINVAL; +} + +static inline int cmdq_pkt_jump_abs(struct cmdq_pkt *pkt, dma_addr_t addr, u8 shift_pa) +{ + return -EINVAL; +} + +static inline int cmdq_pkt_jump(struct cmdq_pkt *pkt, dma_addr_t addr, u8 shift_pa) +{ + return -EINVAL; +} + +static inline int cmdq_pkt_jump_rel(struct cmdq_pkt *pkt, s32 offset, u8 shift_pa) +{ + return -EINVAL; +} + +static inline int cmdq_pkt_eoc(struct cmdq_pkt *pkt) +{ + return -EINVAL; +} + +#endif /* IS_ENABLED(CONFIG_MTK_CMDQ) */ #endif /* __MTK_CMDQ_H__ */ |