diff options
Diffstat (limited to 'include/linux/usb/gadget.h')
| -rw-r--r-- | include/linux/usb/gadget.h | 177 |
1 files changed, 143 insertions, 34 deletions
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 7595056b96c1..8285b19a25e0 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -4,18 +4,19 @@ * * We call the USB code inside a Linux-based peripheral device a "gadget" * driver, except for the hardware-specific bus glue. One USB host can - * master many USB gadgets, but the gadgets are only slaved to one host. + * talk to many USB gadgets, but the gadgets are only able to communicate + * to one host. * * * (C) Copyright 2002-2004 by David Brownell * All Rights Reserved. - * - * This software is licensed under the GNU GPL version 2. */ #ifndef __LINUX_USB_GADGET_H #define __LINUX_USB_GADGET_H +#include <linux/cleanup.h> +#include <linux/configfs.h> #include <linux/device.h> #include <linux/errno.h> #include <linux/init.h> @@ -32,6 +33,7 @@ struct usb_ep; /** * struct usb_request - describes one i/o request + * @ep: The associated endpoint set by usb_ep_alloc_request(). * @buf: Buffer used for data. Always provide this; some controllers * only use PIO, or don't use DMA for some endpoints. * @dma: DMA address corresponding to 'buf'. If you don't set this @@ -42,6 +44,8 @@ struct usb_ep; * @num_mapped_sgs: number of SG entries mapped to DMA (internal) * @length: Length of that data * @stream_id: The stream id, when USB3.0 bulk streams are being used + * @is_last: Indicates if this is the last request of a stream_id before + * switching to a different stream (required for DWC3 controllers). * @no_interrupt: If true, hints that no completion irq is needed. * Helpful sometimes with deep request queues that are handled * directly by DMA controllers. @@ -50,6 +54,7 @@ struct usb_ep; * @short_not_ok: When reading data, makes short packets be * treated as errors (queue stops advancing till cleanup). * @dma_mapped: Indicates if request has been mapped to DMA (internal) + * @sg_was_mapped: Set if the scatterlist has been mapped before the request * @complete: Function called when request completes, so this request and * its buffer may be re-used. The function will always be called with * interrupts disabled, and it must not sleep. @@ -95,6 +100,7 @@ struct usb_ep; */ struct usb_request { + struct usb_ep *ep; void *buf; unsigned length; dma_addr_t dma; @@ -104,10 +110,12 @@ struct usb_request { unsigned num_mapped_sgs; unsigned stream_id:16; + unsigned is_last:1; unsigned no_interrupt:1; unsigned zero:1; unsigned short_not_ok:1; unsigned dma_mapped:1; + unsigned sg_was_mapped:1; void (*complete)(struct usb_ep *ep, struct usb_request *req); @@ -193,7 +201,7 @@ struct usb_ep_caps { * @name:identifier for the endpoint, such as "ep-a" or "ep9in-bulk" * @ops: Function pointers used to access hardware-specific operations. * @ep_list:the gadget's ep_list holds all of its endpoints - * @caps:The structure describing types and directions supported by endoint. + * @caps:The structure describing types and directions supported by endpoint. * @enabled: The current endpoint enabled/disabled state. * @claimed: True if this endpoint is claimed by a function. * @maxpacket:The maximum packet size used on this endpoint. The initial @@ -224,18 +232,18 @@ struct usb_ep { const char *name; const struct usb_ep_ops *ops; + const struct usb_endpoint_descriptor *desc; + const struct usb_ss_ep_comp_descriptor *comp_desc; struct list_head ep_list; struct usb_ep_caps caps; bool claimed; bool enabled; - unsigned maxpacket:16; - unsigned maxpacket_limit:16; - unsigned max_streams:16; unsigned mult:2; unsigned maxburst:5; u8 address; - const struct usb_endpoint_descriptor *desc; - const struct usb_ss_ep_comp_descriptor *comp_desc; + u16 maxpacket; + u16 maxpacket_limit; + u16 max_streams; }; /*-------------------------------------------------------------------------*/ @@ -286,11 +294,36 @@ static inline void usb_ep_fifo_flush(struct usb_ep *ep) /*-------------------------------------------------------------------------*/ +/** + * free_usb_request - frees a usb_request object and its buffer + * @req: the request being freed + * + * This helper function frees both the request's buffer and the request object + * itself by calling usb_ep_free_request(). Its signature is designed to be used + * with DEFINE_FREE() to enable automatic, scope-based cleanup for usb_request + * pointers. + */ +static inline void free_usb_request(struct usb_request *req) +{ + if (!req) + return; + + kfree(req->buf); + usb_ep_free_request(req->ep, req); +} + +DEFINE_FREE(free_usb_request, struct usb_request *, free_usb_request(_T)) + +/*-------------------------------------------------------------------------*/ + struct usb_dcd_config_params { __u8 bU1devExitLat; /* U1 Device exit Latency */ #define USB_DEFAULT_U1_DEV_EXIT_LAT 0x01 /* Less then 1 microsec */ __le16 bU2DevExitLat; /* U2 Device exit Latency */ #define USB_DEFAULT_U2_DEV_EXIT_LAT 0x1F4 /* Less then 500 microsec */ + __u8 besl_baseline; /* Recommended baseline BESL (0-15) */ + __u8 besl_deep; /* Recommended deep BESL (0-15) */ +#define USB_DEFAULT_BESL_UNSPECIFIED 0xFF /* No recommended value */ }; @@ -304,24 +337,31 @@ struct usb_udc; struct usb_gadget_ops { int (*get_frame)(struct usb_gadget *); int (*wakeup)(struct usb_gadget *); + int (*func_wakeup)(struct usb_gadget *gadget, int intf_id); + int (*set_remote_wakeup)(struct usb_gadget *, int set); int (*set_selfpowered) (struct usb_gadget *, int is_selfpowered); int (*vbus_session) (struct usb_gadget *, int is_active); int (*vbus_draw) (struct usb_gadget *, unsigned mA); int (*pullup) (struct usb_gadget *, int is_on); int (*ioctl)(struct usb_gadget *, unsigned code, unsigned long param); - void (*get_config_params)(struct usb_dcd_config_params *); + void (*get_config_params)(struct usb_gadget *, + struct usb_dcd_config_params *); int (*udc_start)(struct usb_gadget *, struct usb_gadget_driver *); int (*udc_stop)(struct usb_gadget *); void (*udc_set_speed)(struct usb_gadget *, enum usb_device_speed); + void (*udc_set_ssp_rate)(struct usb_gadget *gadget, + enum usb_ssp_rate rate); + void (*udc_async_callbacks)(struct usb_gadget *gadget, bool enable); struct usb_ep *(*match_ep)(struct usb_gadget *, struct usb_endpoint_descriptor *, struct usb_ss_ep_comp_descriptor *); + int (*check_config)(struct usb_gadget *gadget); }; /** - * struct usb_gadget - represents a usb slave device + * struct usb_gadget - represents a usb device * @work: (internal use) Workqueue to be used for sysfs_notify() * @udc: struct usb_udc pointer for this gadget * @ops: Function pointers used to access hardware-specific operations. @@ -331,7 +371,14 @@ struct usb_gadget_ops { * @speed: Speed of current connection to USB host. * @max_speed: Maximal speed the UDC can handle. UDC must support this * and all slower speeds. + * @ssp_rate: Current connected SuperSpeed Plus signaling rate and lane count. + * @max_ssp_rate: Maximum SuperSpeed Plus signaling rate and lane count the UDC + * can handle. The UDC must support this and all slower speeds and lower + * number of lanes. * @state: the state we are now (attached, suspended, configured, etc) + * @state_lock: Spinlock protecting the `state` and `teardown` members. + * @teardown: True if the device is undergoing teardown, used to prevent + * new work from being scheduled during cleanup. * @name: Identifies the controller hardware type. Used in diagnostics * and sometimes configuration. * @dev: Driver model state for this abstract device. @@ -369,6 +416,10 @@ struct usb_gadget_ops { * @connected: True if gadget is connected. * @lpm_capable: If the gadget max_speed is FULL or HIGH, this flag * indicates that it supports LPM as per the LPM ECN & errata. + * @wakeup_capable: True if gadget is capable of sending remote wakeup. + * @wakeup_armed: True if gadget is armed by the host for remote wakeup. + * @irq: the interrupt number for device controller. + * @id_number: a unique ID number for ensuring that gadget names are distinct * * Gadgets have a mostly-portable "gadget driver" implementing device * functions, handling all usb configurations and interfaces. Gadget @@ -397,7 +448,14 @@ struct usb_gadget { struct list_head ep_list; /* of usb_ep */ enum usb_device_speed speed; enum usb_device_speed max_speed; + + /* USB SuperSpeed Plus only */ + enum usb_ssp_rate ssp_rate; + enum usb_ssp_rate max_ssp_rate; + enum usb_device_state state; + spinlock_t state_lock; + bool teardown; const char *name; struct device dev; unsigned isoch_delay; @@ -423,9 +481,14 @@ struct usb_gadget { unsigned deactivated:1; unsigned connected:1; unsigned lpm_capable:1; + unsigned wakeup_capable:1; + unsigned wakeup_armed:1; + int irq; + int id_number; }; #define work_to_gadget(w) (container_of((w), struct usb_gadget, work)) +/* Interface to the device model */ static inline void set_gadget_data(struct usb_gadget *gadget, void *data) { dev_set_drvdata(&gadget->dev, data); } static inline void *get_gadget_data(struct usb_gadget *gadget) @@ -434,6 +497,26 @@ static inline struct usb_gadget *dev_to_usb_gadget(struct device *dev) { return container_of(dev, struct usb_gadget, dev); } +static inline struct usb_gadget *usb_get_gadget(struct usb_gadget *gadget) +{ + get_device(&gadget->dev); + return gadget; +} +static inline void usb_put_gadget(struct usb_gadget *gadget) +{ + put_device(&gadget->dev); +} +extern void usb_initialize_gadget(struct device *parent, + struct usb_gadget *gadget, void (*release)(struct device *dev)); +extern int usb_add_gadget(struct usb_gadget *gadget); +extern void usb_del_gadget(struct usb_gadget *gadget); + +/* Legacy device-model interface */ +extern int usb_add_gadget_udc_release(struct device *parent, + struct usb_gadget *gadget, void (*release)(struct device *dev)); +extern int usb_add_gadget_udc(struct device *parent, struct usb_gadget *gadget); +extern void usb_del_gadget_udc(struct usb_gadget *gadget); +extern char *usb_get_gadget_udc_name(void); /* iterates the non-control endpoints; 'tmp' is a struct usb_ep pointer */ #define gadget_for_each_ep(tmp, gadget) \ @@ -448,7 +531,7 @@ static inline struct usb_gadget *dev_to_usb_gadget(struct device *dev) */ static inline size_t usb_ep_align(struct usb_ep *ep, size_t len) { - int max_packet_size = (size_t)usb_endpoint_maxp(ep->desc) & 0x7ff; + int max_packet_size = (size_t)usb_endpoint_maxp(ep->desc); return round_up(len, max_packet_size); } @@ -556,6 +639,7 @@ static inline int gadget_is_otg(struct usb_gadget *g) #if IS_ENABLED(CONFIG_USB_GADGET) int usb_gadget_frame_number(struct usb_gadget *gadget); int usb_gadget_wakeup(struct usb_gadget *gadget); +int usb_gadget_set_remote_wakeup(struct usb_gadget *gadget, int set); int usb_gadget_set_selfpowered(struct usb_gadget *gadget); int usb_gadget_clear_selfpowered(struct usb_gadget *gadget); int usb_gadget_vbus_connect(struct usb_gadget *gadget); @@ -565,11 +649,14 @@ int usb_gadget_connect(struct usb_gadget *gadget); int usb_gadget_disconnect(struct usb_gadget *gadget); int usb_gadget_deactivate(struct usb_gadget *gadget); int usb_gadget_activate(struct usb_gadget *gadget); +int usb_gadget_check_config(struct usb_gadget *gadget); #else static inline int usb_gadget_frame_number(struct usb_gadget *gadget) { return 0; } static inline int usb_gadget_wakeup(struct usb_gadget *gadget) { return 0; } +static inline int usb_gadget_set_remote_wakeup(struct usb_gadget *gadget, int set) +{ return 0; } static inline int usb_gadget_set_selfpowered(struct usb_gadget *gadget) { return 0; } static inline int usb_gadget_clear_selfpowered(struct usb_gadget *gadget) @@ -588,12 +675,14 @@ static inline int usb_gadget_deactivate(struct usb_gadget *gadget) { return 0; } static inline int usb_gadget_activate(struct usb_gadget *gadget) { return 0; } +static inline int usb_gadget_check_config(struct usb_gadget *gadget) +{ return 0; } #endif /* CONFIG_USB_GADGET */ /*-------------------------------------------------------------------------*/ /** - * struct usb_gadget_driver - driver for usb 'slave' devices + * struct usb_gadget_driver - driver for usb gadget devices * @function: String describing the gadget's function * @max_speed: Highest speed the driver handles. * @setup: Invoked for ep0 control requests that aren't handled by @@ -617,9 +706,9 @@ static inline int usb_gadget_activate(struct usb_gadget *gadget) * @driver: Driver model state for this driver. * @udc_name: A name of UDC this driver should be bound to. If udc_name is NULL, * this driver will be bound to any available UDC. - * @pending: UDC core private data used for deferred probe of this driver. - * @match_existing_only: If udc is not found, return an error and don't add this - * gadget driver to list of pending driver + * @match_existing_only: If udc is not found, return an error and fail + * the driver registration + * @is_bound: Allow a driver to be bound to only one gadget * * Devices are disabled till a gadget driver successfully bind()s, which * means the driver will handle setup() requests needed to enumerate (and @@ -654,6 +743,15 @@ static inline int usb_gadget_activate(struct usb_gadget *gadget) * get_interface. Setting a configuration (or interface) is where * endpoints should be activated or (config 0) shut down. * + * The gadget driver's setup() callback does not have to queue a response to + * ep0 within the setup() call, the driver can do it after setup() returns. + * The UDC driver must wait until such a response is queued before proceeding + * with the data/status stages of the control transfer. + * + * NOTE: Currently, a number of UDC drivers rely on USB_GADGET_DELAYED_STATUS + * being returned from the setup() callback, which is a bug. See the comment + * next to USB_GADGET_DELAYED_STATUS for details. + * * (Note that only the default control endpoint is supported. Neither * hosts nor devices generally support control traffic except to ep0.) * @@ -682,8 +780,8 @@ struct usb_gadget_driver { struct device_driver driver; char *udc_name; - struct list_head pending; unsigned match_existing_only:1; + bool is_bound:1; }; @@ -693,22 +791,30 @@ struct usb_gadget_driver { /* driver modules register and unregister, as usual. * these calls must be made in a context that can sleep. * - * these will usually be implemented directly by the hardware-dependent - * usb bus interface driver, which will only support a single driver. + * A gadget driver can be bound to only one gadget at a time. */ /** - * usb_gadget_probe_driver - probe a gadget driver + * usb_gadget_register_driver_owner - register a gadget driver * @driver: the driver being registered + * @owner: the driver module + * @mod_name: the driver module's build name * Context: can sleep * * Call this in your gadget driver's module initialization function, - * to tell the underlying usb controller driver about your driver. + * to tell the underlying UDC controller driver about your driver. * The @bind() function will be called to bind it to a gadget before this * registration call returns. It's expected that the @bind() function will * be in init sections. + * + * Use the macro defined below instead of calling this directly. */ -int usb_gadget_probe_driver(struct usb_gadget_driver *driver); +int usb_gadget_register_driver_owner(struct usb_gadget_driver *driver, + struct module *owner, const char *mod_name); + +/* use a define to avoid include chaining to get THIS_MODULE & friends */ +#define usb_gadget_register_driver(driver) \ + usb_gadget_register_driver_owner(driver, THIS_MODULE, KBUILD_MODNAME) /** * usb_gadget_unregister_driver - unregister a gadget driver @@ -721,16 +827,10 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver); * it will first disconnect(). The driver is also requested * to unbind() and clean up any device state, before this procedure * finally returns. It's expected that the unbind() functions - * will in in exit sections, so may not be linked in some kernels. + * will be in exit sections, so may not be linked in some kernels. */ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver); -extern int usb_add_gadget_udc_release(struct device *parent, - struct usb_gadget *gadget, void (*release)(struct device *dev)); -extern int usb_add_gadget_udc(struct device *parent, struct usb_gadget *gadget); -extern void usb_del_gadget_udc(struct usb_gadget *gadget); -extern char *usb_get_gadget_udc_name(void); - /*-------------------------------------------------------------------------*/ /* utility to simplify dealing with string descriptors */ @@ -763,12 +863,25 @@ struct usb_gadget_strings { struct usb_gadget_string_container { struct list_head list; - u8 *stash[0]; + u8 *stash[]; }; /* put descriptor for string with that id into buf (buflen >= 256) */ int usb_gadget_get_string(const struct usb_gadget_strings *table, int id, u8 *buf); +/* check if the given language identifier is valid */ +bool usb_validate_langid(u16 langid); + +struct gadget_string { + struct config_item item; + struct list_head list; + char string[USB_MAX_STRING_LEN]; + struct usb_string usb_string; +}; + +#define to_gadget_string(str_item)\ +container_of(str_item, struct gadget_string, item) + /*-------------------------------------------------------------------------*/ /* utility to simplify managing config descriptors */ @@ -777,10 +890,6 @@ int usb_gadget_get_string(const struct usb_gadget_strings *table, int id, u8 *bu int usb_descriptor_fillbuf(void *, unsigned, const struct usb_descriptor_header **); -/* build config descriptor from single descriptor vector */ -int usb_gadget_config_buf(const struct usb_config_descriptor *config, - void *buf, unsigned buflen, const struct usb_descriptor_header **desc); - /* copy a NULL-terminated vector of descriptors */ struct usb_descriptor_header **usb_copy_descriptors( struct usb_descriptor_header **); |