diff options
Diffstat (limited to 'include/media/cec.h')
| -rw-r--r-- | include/media/cec.h | 170 |
1 files changed, 157 insertions, 13 deletions
diff --git a/include/media/cec.h b/include/media/cec.h index 707411ef8ba2..0c8e86115b6f 100644 --- a/include/media/cec.h +++ b/include/media/cec.h @@ -10,14 +10,12 @@ #include <linux/poll.h> #include <linux/fs.h> -#include <linux/debugfs.h> #include <linux/device.h> #include <linux/cdev.h> #include <linux/kthread.h> #include <linux/timer.h> #include <linux/cec-funcs.h> #include <media/rc-core.h> -#include <media/cec-notifier.h> #define CEC_CAP_DEFAULTS (CEC_CAP_LOG_ADDRS | CEC_CAP_TRANSMIT | \ CEC_CAP_PASSTHROUGH | CEC_CAP_RC) @@ -27,13 +25,17 @@ * @dev: cec device * @cdev: cec character device * @minor: device node minor number + * @lock: lock to serialize open/release and registration * @registered: the device was correctly registered * @unregistered: the device was unregistered - * @fhs_lock: lock to control access to the filehandle list + * @lock_fhs: lock to control access to @fhs * @fhs: the list of open filehandles (cec_fh) * * This structure represents a cec-related device node. * + * To add or remove filehandles from @fhs the @lock must be taken first, + * followed by @lock_fhs. It is safe to access @fhs if either lock is held. + * * The @parent is a physical device. It must be set by core or device drivers * before registering the node. */ @@ -44,21 +46,27 @@ struct cec_devnode { /* device info */ int minor; + /* serialize open/release and registration */ + struct mutex lock; bool registered; bool unregistered; + /* protect access to fhs */ + struct mutex lock_fhs; struct list_head fhs; - struct mutex lock; }; struct cec_adapter; struct cec_data; struct cec_pin; +struct cec_notifier; struct cec_data { struct list_head list; struct list_head xfer_list; struct cec_adapter *adap; struct cec_msg msg; + u8 match_len; + u8 match_reply[5]; struct cec_fh *fh; struct delayed_work work; struct completion c; @@ -106,21 +114,25 @@ struct cec_fh { #define CEC_FREE_TIME_TO_USEC(ft) ((ft) * 2400) struct cec_adap_ops { - /* Low-level callbacks */ + /* Low-level callbacks, called with adap->lock held */ int (*adap_enable)(struct cec_adapter *adap, bool enable); int (*adap_monitor_all_enable)(struct cec_adapter *adap, bool enable); int (*adap_monitor_pin_enable)(struct cec_adapter *adap, bool enable); int (*adap_log_addr)(struct cec_adapter *adap, u8 logical_addr); + void (*adap_unconfigured)(struct cec_adapter *adap); int (*adap_transmit)(struct cec_adapter *adap, u8 attempts, u32 signal_free_time, struct cec_msg *msg); + void (*adap_nb_transmit_canceled)(struct cec_adapter *adap, + const struct cec_msg *msg); void (*adap_status)(struct cec_adapter *adap, struct seq_file *file); void (*adap_free)(struct cec_adapter *adap); - /* Error injection callbacks */ + /* Error injection callbacks, called without adap->lock held */ int (*error_inj_show)(struct cec_adapter *adap, struct seq_file *sf); bool (*error_inj_parse_line)(struct cec_adapter *adap, char *line); - /* High-level CEC message callback */ + /* High-level CEC message callback, called without adap->lock held */ + void (*configured)(struct cec_adapter *adap); int (*received)(struct cec_adapter *adap, struct cec_msg *msg); }; @@ -144,6 +156,81 @@ struct cec_adap_ops { */ #define CEC_MAX_MSG_TX_QUEUE_SZ (18 * 1) +/** + * struct cec_adapter - cec adapter structure + * @owner: module owner + * @name: name of the CEC adapter + * @devnode: device node for the /dev/cecX device + * @lock: mutex controlling access to this structure + * @rc: remote control device + * @transmit_queue: queue of pending transmits + * @transmit_queue_sz: number of pending transmits + * @wait_queue: queue of transmits waiting for a reply + * @transmitting: CEC messages currently being transmitted + * @transmit_in_progress: true if a transmit is in progress + * @transmit_in_progress_aborted: true if a transmit is in progress is to be + * aborted. This happens if the logical address is + * invalidated while the transmit is ongoing. In that + * case the transmit will finish, but will not retransmit + * and be marked as ABORTED. + * @xfer_timeout_ms: the transfer timeout in ms. + * If 0, then timeout after 2100 ms. + * @kthread_config: kthread used to configure a CEC adapter + * @config_completion: used to signal completion of the config kthread + * @kthread: main CEC processing thread + * @kthread_waitq: main CEC processing wait_queue + * @ops: cec adapter ops + * @priv: cec driver's private data + * @capabilities: cec adapter capabilities + * @available_log_addrs: maximum number of available logical addresses + * @phys_addr: the current physical address + * @needs_hpd: if true, then the HDMI HotPlug Detect pin must be high + * in order to transmit or receive CEC messages. This is usually a HW + * limitation. + * @is_enabled: the CEC adapter is enabled + * @is_claiming_log_addrs: true if cec_claim_log_addrs() is running + * @is_configuring: the CEC adapter is configuring (i.e. claiming LAs) + * @must_reconfigure: while configuring, the PA changed, so reclaim LAs + * @is_configured: the CEC adapter is configured (i.e. has claimed LAs) + * @cec_pin_is_high: if true then the CEC pin is high. Only used with the + * CEC pin framework. + * @adap_controls_phys_addr: if true, then the CEC adapter controls the + * physical address, i.e. the CEC hardware can detect HPD changes and + * read the EDID and is not dependent on an external HDMI driver. + * Drivers that need this can set this field to true after the + * cec_allocate_adapter() call. + * @last_initiator: the initiator of the last transmitted message. + * @monitor_all_cnt: number of filehandles monitoring all msgs + * @monitor_pin_cnt: number of filehandles monitoring pin changes + * @follower_cnt: number of filehandles in follower mode + * @cec_follower: filehandle of the exclusive follower + * @cec_initiator: filehandle of the exclusive initiator + * @passthrough: if true, then the exclusive follower is in + * passthrough mode. + * @log_addrs: current logical addresses + * @conn_info: current connector info + * @tx_timeout_cnt: count the number of Timed Out transmits. + * Reset to 0 when this is reported in cec_adap_status(). + * @tx_low_drive_cnt: count the number of Low Drive transmits. + * Reset to 0 when this is reported in cec_adap_status(). + * @tx_error_cnt: count the number of Error transmits. + * Reset to 0 when this is reported in cec_adap_status(). + * @tx_arb_lost_cnt: count the number of Arb Lost transmits. + * Reset to 0 when this is reported in cec_adap_status(). + * @tx_low_drive_log_cnt: number of logged Low Drive transmits since the + * adapter was enabled. Used to avoid flooding the kernel + * log if this happens a lot. + * @tx_error_log_cnt: number of logged Error transmits since the adapter was + * enabled. Used to avoid flooding the kernel log if this + * happens a lot. + * @notifier: CEC notifier + * @pin: CEC pin status struct + * @cec_dir: debugfs cec directory + * @sequence: transmit sequence counter + * @input_phys: remote control input_phys name + * + * This structure represents a cec adapter. + */ struct cec_adapter { struct module *owner; char name[32]; @@ -156,13 +243,14 @@ struct cec_adapter { struct list_head wait_queue; struct cec_data *transmitting; bool transmit_in_progress; + bool transmit_in_progress_aborted; + unsigned int xfer_timeout_ms; struct task_struct *kthread_config; struct completion config_completion; struct task_struct *kthread; wait_queue_head_t kthread_waitq; - wait_queue_head_t waitq; const struct cec_adap_ops *ops; void *priv; @@ -171,9 +259,13 @@ struct cec_adapter { u16 phys_addr; bool needs_hpd; + bool is_enabled; + bool is_claiming_log_addrs; bool is_configuring; + bool must_reconfigure; bool is_configured; bool cec_pin_is_high; + bool adap_controls_phys_addr; u8 last_initiator; u32 monitor_all_cnt; u32 monitor_pin_cnt; @@ -182,8 +274,14 @@ struct cec_adapter { struct cec_fh *cec_initiator; bool passthrough; struct cec_log_addrs log_addrs; + struct cec_connector_info conn_info; - u32 tx_timeouts; + u32 tx_timeout_cnt; + u32 tx_low_drive_cnt; + u32 tx_error_cnt; + u32 tx_arb_lost_cnt; + u32 tx_low_drive_log_cnt; + u32 tx_error_log_cnt; #ifdef CONFIG_CEC_NOTIFIER struct cec_notifier *notifier; @@ -193,15 +291,43 @@ struct cec_adapter { #endif struct dentry *cec_dir; - struct dentry *status_file; - struct dentry *error_inj_file; - u16 phys_addrs[15]; u32 sequence; - char input_phys[32]; + char input_phys[40]; }; +static inline int cec_get_device(struct cec_adapter *adap) +{ + struct cec_devnode *devnode = &adap->devnode; + + /* + * Check if the cec device is available. This needs to be done with + * the devnode->lock held to prevent an open/unregister race: + * without the lock, the device could be unregistered and freed between + * the devnode->registered check and get_device() calls, leading to + * a crash. + */ + mutex_lock(&devnode->lock); + /* + * return ENODEV if the cec device has been removed + * already or if it is not registered anymore. + */ + if (!devnode->registered) { + mutex_unlock(&devnode->lock); + return -ENODEV; + } + /* and increase the device refcount */ + get_device(&devnode->dev); + mutex_unlock(&devnode->lock); + return 0; +} + +static inline void cec_put_device(struct cec_adapter *adap) +{ + put_device(&adap->devnode.dev); +} + static inline void *cec_get_drvdata(const struct cec_adapter *adap) { return adap->priv; @@ -233,6 +359,7 @@ static inline bool cec_is_registered(const struct cec_adapter *adap) ((pa) >> 12), ((pa) >> 8) & 0xf, ((pa) >> 4) & 0xf, (pa) & 0xf struct edid; +struct drm_connector; #if IS_REACHABLE(CONFIG_CEC_CORE) struct cec_adapter *cec_allocate_adapter(const struct cec_adap_ops *ops, @@ -247,6 +374,8 @@ void cec_s_phys_addr(struct cec_adapter *adap, u16 phys_addr, bool block); void cec_s_phys_addr_from_edid(struct cec_adapter *adap, const struct edid *edid); +void cec_s_conn_info(struct cec_adapter *adap, + const struct cec_connector_info *conn_info); int cec_transmit_msg(struct cec_adapter *adap, struct cec_msg *msg, bool block); @@ -331,6 +460,9 @@ void cec_queue_pin_5v_event(struct cec_adapter *adap, bool is_high, ktime_t ts); u16 cec_get_edid_phys_addr(const u8 *edid, unsigned int size, unsigned int *offset); +void cec_fill_conn_info_from_drm(struct cec_connector_info *conn_info, + const struct drm_connector *connector); + #else static inline int cec_register_adapter(struct cec_adapter *adap, @@ -365,6 +497,18 @@ static inline u16 cec_get_edid_phys_addr(const u8 *edid, unsigned int size, return CEC_PHYS_ADDR_INVALID; } +static inline void cec_s_conn_info(struct cec_adapter *adap, + const struct cec_connector_info *conn_info) +{ +} + +static inline void +cec_fill_conn_info_from_drm(struct cec_connector_info *conn_info, + const struct drm_connector *connector) +{ + memset(conn_info, 0, sizeof(*conn_info)); +} + #endif /** |