diff options
Diffstat (limited to 'include/media/v4l2-common.h')
| -rw-r--r-- | include/media/v4l2-common.h | 170 |
1 files changed, 151 insertions, 19 deletions
diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h index 63ad36f04f72..f8b1faced79c 100644 --- a/include/media/v4l2-common.h +++ b/include/media/v4l2-common.h @@ -7,7 +7,7 @@ Each ioctl begins with VIDIOC_INT_ to clearly mark that it is an internal define, - Copyright (C) 2005 Hans Verkuil <hverkuil@xs4all.nl> + Copyright (C) 2005 Hans Verkuil <hverkuil@kernel.org> */ @@ -97,6 +97,7 @@ int v4l2_ctrl_query_fill(struct v4l2_queryctrl *qctrl, /* ------------------------------------------------------------------------- */ +struct clk; struct v4l2_device; struct v4l2_subdev; struct v4l2_subdev_ops; @@ -390,38 +391,72 @@ void v4l_bound_align_image(unsigned int *width, unsigned int wmin, unsigned int salign); /** - * v4l2_find_nearest_size - Find the nearest size among a discrete - * set of resolutions contained in an array of a driver specific struct. + * v4l2_find_nearest_size_conditional - Find the nearest size among a discrete + * set of resolutions contained in an array of a driver specific struct, + * with conditionally exlusion of certain modes * * @array: a driver specific array of image sizes * @array_size: the length of the driver specific array of image sizes * @width_field: the name of the width field in the driver specific struct * @height_field: the name of the height field in the driver specific struct - * @width: desired width. - * @height: desired height. + * @width: desired width + * @height: desired height + * @func: ignores mode if returns false + * @context: context for the function * * Finds the closest resolution to minimize the width and height differences * between what requested and the supported resolutions. The size of the width * and height fields in the driver specific must equal to that of u32, i.e. four - * bytes. + * bytes. @func is called for each mode considered, a mode is ignored if @func + * returns false for it. * * Returns the best match or NULL if the length of the array is zero. */ -#define v4l2_find_nearest_size(array, array_size, width_field, height_field, \ - width, height) \ +#define v4l2_find_nearest_size_conditional(array, array_size, width_field, \ + height_field, width, height, \ + func, context) \ ({ \ BUILD_BUG_ON(sizeof((array)->width_field) != sizeof(u32) || \ sizeof((array)->height_field) != sizeof(u32)); \ - (typeof(&(array)[0]))__v4l2_find_nearest_size( \ + (typeof(&(array)[0]))__v4l2_find_nearest_size_conditional( \ (array), array_size, sizeof(*(array)), \ offsetof(typeof(*(array)), width_field), \ offsetof(typeof(*(array)), height_field), \ - width, height); \ + width, height, func, context); \ }) const void * -__v4l2_find_nearest_size(const void *array, size_t array_size, - size_t entry_size, size_t width_offset, - size_t height_offset, s32 width, s32 height); +__v4l2_find_nearest_size_conditional(const void *array, size_t array_size, + size_t entry_size, size_t width_offset, + size_t height_offset, s32 width, + s32 height, + bool (*func)(const void *array, + size_t index, + const void *context), + const void *context); + +/** + * v4l2_find_nearest_size - Find the nearest size among a discrete set of + * resolutions contained in an array of a driver specific struct + * + * @array: a driver specific array of image sizes + * @array_size: the length of the driver specific array of image sizes + * @width_field: the name of the width field in the driver specific struct + * @height_field: the name of the height field in the driver specific struct + * @width: desired width + * @height: desired height + * + * Finds the closest resolution to minimize the width and height differences + * between what requested and the supported resolutions. The size of the width + * and height fields in the driver specific must equal to that of u32, i.e. four + * bytes. + * + * Returns the best match or NULL if the length of the array is zero. + */ +#define v4l2_find_nearest_size(array, array_size, width_field, \ + height_field, width, height) \ + v4l2_find_nearest_size_conditional(array, array_size, width_field, \ + height_field, width, height, NULL, \ + NULL) /** * v4l2_g_parm_cap - helper routine for vidioc_g_parm to fill this in by @@ -525,25 +560,49 @@ int v4l2_fill_pixfmt_mp(struct v4l2_pix_format_mplane *pixfmt, u32 pixelformat, /** * v4l2_get_link_freq - Get link rate from transmitter * - * @handler: The transmitter's control handler + * @pad: The transmitter's media pad * @mul: The multiplier between pixel rate and link frequency. Bits per pixel on * D-PHY, samples per clock on parallel. 0 otherwise. * @div: The divisor between pixel rate and link frequency. Number of data lanes * times two on D-PHY, 1 on parallel. 0 otherwise. * - * This function is intended for obtaining the link frequency from the - * transmitter sub-devices. It returns the link rate, either from the - * V4L2_CID_LINK_FREQ control implemented by the transmitter, or value - * calculated based on the V4L2_CID_PIXEL_RATE implemented by the transmitter. + * This function obtains and returns the link frequency from the transmitter + * sub-device's pad. The link frequency is retrieved using the get_mbus_config + * sub-device pad operation. If this fails, the function falls back to obtaining + * the frequency either directly from the V4L2_CID_LINK_FREQ control if + * implemented by the transmitter, or by calculating it from the pixel rate + * obtained from the V4L2_CID_PIXEL_RATE control. * * Return: * * >0: Link frequency * * %-ENOENT: Link frequency or pixel rate control not found * * %-EINVAL: Invalid link frequency value */ -s64 v4l2_get_link_freq(struct v4l2_ctrl_handler *handler, unsigned int mul, +#ifdef CONFIG_MEDIA_CONTROLLER +s64 v4l2_get_link_freq(const struct media_pad *pad, unsigned int mul, unsigned int div); +/** + * v4l2_get_active_data_lanes - Get number of active data lanes from driver + * + * @pad: The transmitter's media pad. + * @max_data_lanes: The maximum number of active data lanes supported by + * the MIPI CSI link in hardware. + * + * This function is intended for obtaining the number of data lanes that are + * actively being used by the driver for a MIPI CSI-2 device on a given media pad. + * This information is derived from a mbus_config fetched from a device driver + * using the get_mbus_config v4l2_subdev pad op. + * + * Return: + * * >0: Number of active data lanes + * * %-EINVAL: Number of active data lanes is invalid, as it exceeds the maximum + * supported data lanes. + */ +int v4l2_get_active_data_lanes(const struct media_pad *pad, + unsigned int max_data_lanes); +#endif + void v4l2_simplify_fraction(u32 *numerator, u32 *denominator, unsigned int n_terms, unsigned int threshold); u32 v4l2_fraction_to_interval(u32 numerator, u32 denominator); @@ -573,6 +632,79 @@ int v4l2_link_freq_to_bitmap(struct device *dev, const u64 *fw_link_freqs, unsigned int num_of_driver_link_freqs, unsigned long *bitmap); +struct clk *__devm_v4l2_sensor_clk_get(struct device *dev, const char *id, + bool legacy, bool fixed_rate, + unsigned long clk_rate); + +/** + * devm_v4l2_sensor_clk_get - lookup and obtain a reference to a clock producer + * for a camera sensor + * + * @dev: device for v4l2 sensor clock "consumer" + * @id: clock consumer ID + * + * This function behaves the same way as devm_clk_get() except where there + * is no clock producer like in ACPI-based platforms. + * + * For ACPI-based platforms, the function will read the "clock-frequency" + * ACPI _DSD property and register a fixed-clock with the frequency indicated + * in the property. + * + * This function also handles the special ACPI-based system case where: + * + * * The clock-frequency _DSD property is present. + * * A reference to the clock producer is present, where the clock is provided + * by a camera sensor PMIC driver (e.g. int3472/tps68470.c) + * + * In this case try to set the clock-frequency value to the provided clock. + * + * As the name indicates, this function may only be used on camera sensor + * devices. This is because generally only camera sensors do need a clock to + * query the frequency from, due to the requirement to configure the PLL for a + * given CSI-2 interface frequency where the sensor's external clock frequency + * is a factor. Additionally, the clock frequency tends to be available on ACPI + * firmware based systems for camera sensors specifically (if e.g. DisCo for + * Imaging compliant). + * + * Returns a pointer to a struct clk on success or an error pointer on failure. + */ +static inline struct clk * +devm_v4l2_sensor_clk_get(struct device *dev, const char *id) +{ + return __devm_v4l2_sensor_clk_get(dev, id, false, false, 0); +} + +/** + * devm_v4l2_sensor_clk_get_legacy - lookup and obtain a reference to a clock + * producer for a camera sensor. + * + * @dev: device for v4l2 sensor clock "consumer" + * @id: clock consumer ID + * @fixed_rate: interpret the @clk_rate as a fixed rate or default rate + * @clk_rate: the clock rate + * + * This function behaves the same way as devm_v4l2_sensor_clk_get() except that + * it extends the behaviour on ACPI platforms to all platforms. + * + * The function also provides the ability to set the clock rate to a fixed + * frequency by setting @fixed_rate to true and specifying the fixed frequency + * in @clk_rate, or to use a default clock rate when the "clock-frequency" + * property is absent by setting @fixed_rate to false and specifying the default + * frequency in @clk_rate. Setting @fixed_rate to true and @clk_rate to 0 is an + * error. + * + * This function is meant to support legacy behaviour in existing drivers only. + * It must not be used in any new driver. + * + * Returns a pointer to a struct clk on success or an error pointer on failure. + */ +static inline struct clk * +devm_v4l2_sensor_clk_get_legacy(struct device *dev, const char *id, + bool fixed_rate, unsigned long clk_rate) +{ + return __devm_v4l2_sensor_clk_get(dev, id, true, fixed_rate, clk_rate); +} + static inline u64 v4l2_buffer_get_timestamp(const struct v4l2_buffer *buf) { /* |