diff options
Diffstat (limited to 'include/sound/tas2781-dsp.h')
| -rw-r--r-- | include/sound/tas2781-dsp.h | 52 |
1 files changed, 47 insertions, 5 deletions
diff --git a/include/sound/tas2781-dsp.h b/include/sound/tas2781-dsp.h index 7fba7ea26a4b..dd6ee45ad096 100644 --- a/include/sound/tas2781-dsp.h +++ b/include/sound/tas2781-dsp.h @@ -2,7 +2,7 @@ // // ALSA SoC Texas Instruments TAS2781 Audio Smart Amplifier // -// Copyright (C) 2022 - 2024 Texas Instruments Incorporated +// Copyright (C) 2022 - 2025 Texas Instruments Incorporated // https://www.ti.com // // The TAS2781 driver implements a flexible and configurable @@ -30,8 +30,11 @@ #define PRE_DEVICE_C 0x12 #define PRE_DEVICE_D 0x16 -#define PPC3_VERSION 0x4100 -#define PPC3_VERSION_TAS2781 0x14600 +#define PPC3_VERSION_BASE 0x4100 +#define PPC3_VERSION_TAS2781_BASIC_MIN 0x14600 +#define PPC3_VERSION_TAS2781_ALPHA_MIN 0x4a00 +#define PPC3_VERSION_TAS2781_BETA_MIN 0x19400 +#define PPC3_VERSION_TAS5825_BASE 0x114200 #define TASDEVICE_DEVICE_SUM 8 #define TASDEVICE_CONFIG_SUM 64 @@ -51,6 +54,8 @@ enum tasdevice_dsp_dev_idx { TASDEVICE_DSP_TAS_2781_DUAL_MONO, TASDEVICE_DSP_TAS_2781_21, TASDEVICE_DSP_TAS_2781_QUAD, + TASDEVICE_DSP_TAS_5825_MONO, + TASDEVICE_DSP_TAS_5825_DUAL, TASDEVICE_DSP_TAS_MAX_DEVICE }; @@ -106,6 +111,27 @@ struct tasdevice_calibration { struct tasdevice_data dev_data; }; +struct fct_param_address { + /* Thermal data for PG 1.0 device */ + unsigned char thr[3]; + /* Thermal data for PG 2.0 device */ + unsigned char thr2[3]; + /* Pilot tone enable flag, usually the sine wave */ + unsigned char plt_flg[3]; + /* Pilot tone gain for calibration */ + unsigned char sin_gn[3]; + /* Pilot tone gain for calibration */ + unsigned char sin_gn2[3]; + /* high 32-bit of real-time spk impedance */ + unsigned char r0_reg[3]; + /* check spk connection */ + unsigned char tf_reg[3]; + /* check spk resonant frequency */ + unsigned char a1_reg[3]; + /* check spk resonant frequency */ + unsigned char a2_reg[3]; +}; + struct tasdevice_fw { struct tasdevice_dspfw_hdr fw_hdr; unsigned short nr_programs; @@ -114,13 +140,21 @@ struct tasdevice_fw { struct tasdevice_config *configs; unsigned short nr_calibrations; struct tasdevice_calibration *calibrations; + struct fct_param_address fct_par_addr; struct device *dev; }; -enum tasdevice_dsp_fw_state { - TASDEVICE_DSP_FW_NONE = 0, +enum tasdevice_fw_state { + /* Driver in startup mode, not load any firmware. */ TASDEVICE_DSP_FW_PENDING, + /* DSP firmware in the system, but parsing error. */ TASDEVICE_DSP_FW_FAIL, + /* + * Only RCA (Reconfigurable Architecture) firmware load + * successfully. + */ + TASDEVICE_RCA_FW_OK, + /* Both RCA and DSP firmware load successfully. */ TASDEVICE_DSP_FW_ALL_OK, }; @@ -167,6 +201,14 @@ struct tasdevice_rca { int ncfgs; struct tasdevice_config_info **cfg_info; int profile_cfg_id; + /* + * Since version 0x105, the keyword 'init' was introduced into the + * profile, which is used for chip initialization, particularly to + * store common settings for other non-initialization profiles. + * if (init_profile_id < 0) + * No init profile inside the RCA firmware. + */ + int init_profile_id; }; void tasdevice_select_cfg_blk(void *context, int conf_no, |