diff options
Diffstat (limited to 'include/uapi/linux/mdio.h')
| -rw-r--r-- | include/uapi/linux/mdio.h | 29 |
1 files changed, 27 insertions, 2 deletions
diff --git a/include/uapi/linux/mdio.h b/include/uapi/linux/mdio.h index d03863da180e..8d769f100de6 100644 --- a/include/uapi/linux/mdio.h +++ b/include/uapi/linux/mdio.h @@ -23,6 +23,7 @@ #define MDIO_MMD_DTEXS 5 /* DTE Extender Sublayer */ #define MDIO_MMD_TC 6 /* Transmission Convergence */ #define MDIO_MMD_AN 7 /* Auto-Negotiation */ +#define MDIO_MMD_POWER_UNIT 13 /* PHY Power Unit */ #define MDIO_MMD_C22EXT 29 /* Clause 22 extension */ #define MDIO_MMD_VEND1 30 /* Vendor specific 1 */ #define MDIO_MMD_VEND2 31 /* Vendor specific 2 */ @@ -115,15 +116,30 @@ #define MDIO_CTRL1_SPEED10G (MDIO_CTRL1_SPEEDSELEXT | 0x00) /* 10PASS-TS/2BASE-TL */ #define MDIO_CTRL1_SPEED10P2B (MDIO_CTRL1_SPEEDSELEXT | 0x04) +/* Note: the MDIO_CTRL1_SPEED_XXX values for everything past 10PASS-TS/2BASE-TL + * do not match between the PCS and PMA values. Any additions past this point + * should be PMA or PCS specific. The following 2 defines are workarounds for + * values added before this was caught. They should be considered deprecated. + */ +#define MDIO_CTRL1_SPEED2_5G MDIO_PMA_CTRL1_SPEED2_5G +#define MDIO_CTRL1_SPEED5G MDIO_PMA_CTRL1_SPEED5G +/* 100 Gb/s */ +#define MDIO_PCS_CTRL1_SPEED100G (MDIO_CTRL1_SPEEDSELEXT | 0x10) +/* 25 Gb/s */ +#define MDIO_PCS_CTRL1_SPEED25G (MDIO_CTRL1_SPEEDSELEXT | 0x14) +/* 50 Gb/s */ +#define MDIO_PCS_CTRL1_SPEED50G (MDIO_CTRL1_SPEEDSELEXT | 0x18) /* 2.5 Gb/s */ -#define MDIO_CTRL1_SPEED2_5G (MDIO_CTRL1_SPEEDSELEXT | 0x18) +#define MDIO_PMA_CTRL1_SPEED2_5G (MDIO_CTRL1_SPEEDSELEXT | 0x18) /* 5 Gb/s */ -#define MDIO_CTRL1_SPEED5G (MDIO_CTRL1_SPEEDSELEXT | 0x1c) +#define MDIO_PMA_CTRL1_SPEED5G (MDIO_CTRL1_SPEEDSELEXT | 0x1c) + /* Status register 1. */ #define MDIO_STAT1_LPOWERABLE 0x0002 /* Low-power ability */ #define MDIO_STAT1_LSTATUS BMSR_LSTATUS #define MDIO_STAT1_FAULT 0x0080 /* Fault */ +#define MDIO_PCS_STAT1_CLKSTOP_CAP 0x0040 #define MDIO_AN_STAT1_LPABLE 0x0001 /* Link partner AN ability */ #define MDIO_AN_STAT1_ABLE BMSR_ANEGCAPABLE #define MDIO_AN_STAT1_RFAULT BMSR_RFAULT @@ -131,6 +147,11 @@ #define MDIO_AN_STAT1_PAGE 0x0040 /* Page received */ #define MDIO_AN_STAT1_XNP 0x0080 /* Extended next page status */ +/* Device Identifier 2 */ +#define MDIO_DEVID2_OUI 0xfc00 /* OUI Portion of PHY ID */ +#define MDIO_DEVID2_MODEL_NUM 0x03f0 /* Manufacturer's Model Number */ +#define MDIO_DEVID2_REV_NUM 0x000f /* Revision Number */ + /* Speed register. */ #define MDIO_SPEED_10G 0x0001 /* 10G capable */ #define MDIO_PMA_SPEED_2B 0x0002 /* 2BASE-TL capable */ @@ -138,6 +159,8 @@ #define MDIO_PMA_SPEED_1000 0x0010 /* 1000M capable */ #define MDIO_PMA_SPEED_100 0x0020 /* 100M capable */ #define MDIO_PMA_SPEED_10 0x0040 /* 10M capable */ +#define MDIO_PMA_SPEED_2_5G 0x2000 /* 2.5G capable */ +#define MDIO_PMA_SPEED_5G 0x4000 /* 5G capable */ #define MDIO_PCS_SPEED_10P2B 0x0002 /* 10PASS-TS/2BASE-TL capable */ #define MDIO_PCS_SPEED_2_5G 0x0040 /* 2.5G capable */ #define MDIO_PCS_SPEED_5G 0x0080 /* 5G capable */ @@ -348,6 +371,8 @@ /* BASE-T1 auto-negotiation advertisement register [31:16] */ #define MDIO_AN_T1_ADV_M_B10L 0x4000 /* device is compatible with 10BASE-T1L */ +#define MDIO_AN_T1_ADV_M_1000BT1 0x0080 /* advertise 1000BASE-T1 */ +#define MDIO_AN_T1_ADV_M_100BT1 0x0020 /* advertise 100BASE-T1 */ #define MDIO_AN_T1_ADV_M_MST 0x0010 /* advertise master preference */ /* BASE-T1 auto-negotiation advertisement register [47:32] */ |