diff options
Diffstat (limited to 'include/uapi/linux/nl80211.h')
| -rw-r--r-- | include/uapi/linux/nl80211.h | 414 |
1 files changed, 383 insertions, 31 deletions
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 6d11437596b9..8134f10e4e6c 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -11,7 +11,7 @@ * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com> * Copyright 2008 Colin McCabe <colin@cozybit.com> * Copyright 2015-2017 Intel Deutschland GmbH - * Copyright (C) 2018-2024 Intel Corporation + * Copyright (C) 2018-2025 Intel Corporation * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -1085,8 +1085,9 @@ * %NL80211_ATTR_NAN_MASTER_PREF attribute and optional * %NL80211_ATTR_BANDS attributes. If %NL80211_ATTR_BANDS is * omitted or set to 0, it means don't-care and the device will - * decide what to use. After this command NAN functions can be - * added. + * decide what to use. Additional cluster configuration may be + * optionally provided with %NL80211_ATTR_NAN_CONFIG. + * After this command NAN functions can be added. * @NL80211_CMD_STOP_NAN: Stop the NAN operation, identified by * its %NL80211_ATTR_WDEV interface. * @NL80211_CMD_ADD_NAN_FUNCTION: Add a NAN function. The function is defined @@ -1115,6 +1116,10 @@ * current configuration is not changed. If it is present but * set to zero, the configuration is changed to don't-care * (i.e. the device can decide what to do). + * Additional parameters may be provided with + * %NL80211_ATTR_NAN_CONFIG. User space should provide all previously + * configured nested attributes under %NL80211_ATTR_NAN_CONFIG, even if + * only a subset was changed. * @NL80211_CMD_NAN_MATCH: Notification sent when a match is reported. * This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and * %NL80211_ATTR_COOKIE. @@ -1329,6 +1334,33 @@ * %NL80211_ATTR_MLO_TTLM_ULINK attributes are used to specify the * TID to Link mapping for downlink/uplink traffic. * + * @NL80211_CMD_ASSOC_MLO_RECONF: For a non-AP MLD station, request to + * add/remove links to/from the association. To indicate link + * reconfiguration request results from the driver, this command is also + * used as an event to notify userspace about the added links information. + * For notifying the removed links information, the existing + * %NL80211_CMD_LINKS_REMOVED command is used. This command is also used to + * notify userspace about newly added links for the current connection in + * case of AP-initiated link recommendation requests, received via + * a BTM (BSS Transition Management) request or a link reconfig notify + * frame, where the driver handles the link recommendation offload. + * + * @NL80211_CMD_EPCS_CFG: EPCS configuration for a station. Used by userland to + * control EPCS configuration. Used to notify userland on the current state + * of EPCS. + * + * @NL80211_CMD_NAN_NEXT_DW_NOTIFICATION: This command is used to notify + * user space about the next NAN Discovery Window (DW). User space may use + * it to prepare frames to be sent in the next DW. + * %NL80211_ATTR_WIPHY_FREQ is used to indicate the frequency of the next + * DW. SDF transmission should be requested with %NL80211_CMD_FRAME and + * the device/driver shall take care of the actual transmission timing. + * This notification is only sent to the NAN interface owning socket + * (see %NL80211_ATTR_SOCKET_OWNER flag). + * @NL80211_CMD_NAN_CLUSTER_JOINED: This command is used to notify + * user space that the NAN new cluster has been joined. The cluster ID is + * indicated by %NL80211_ATTR_MAC. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -1586,6 +1618,12 @@ enum nl80211_commands { NL80211_CMD_SET_TID_TO_LINK_MAPPING, + NL80211_CMD_ASSOC_MLO_RECONF, + NL80211_CMD_EPCS_CFG, + + NL80211_CMD_NAN_NEXT_DW_NOTIFICATION, + NL80211_CMD_NAN_CLUSTER_JOINED, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -1925,8 +1963,9 @@ enum nl80211_commands { * The driver must also specify support for this with the extended * features NL80211_EXT_FEATURE_BEACON_RATE_LEGACY, * NL80211_EXT_FEATURE_BEACON_RATE_HT, - * NL80211_EXT_FEATURE_BEACON_RATE_VHT and - * NL80211_EXT_FEATURE_BEACON_RATE_HE. + * NL80211_EXT_FEATURE_BEACON_RATE_VHT, + * NL80211_EXT_FEATURE_BEACON_RATE_HE and + * NL80211_EXT_FEATURE_BEACON_RATE_EHT. * * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain * at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME. @@ -2265,7 +2304,8 @@ enum nl80211_commands { * @NL80211_ATTR_PEER_AID: Association ID for the peer TDLS station (u16). * This is similar to @NL80211_ATTR_STA_AID but with a difference of being * allowed to be used with the first @NL80211_CMD_SET_STATION command to - * update a TDLS peer STA entry. + * update a TDLS peer STA entry. For S1G interfaces, this is limited to + * 1600 for the current mac80211 implementation. * * @NL80211_ATTR_COALESCE_RULE: Coalesce rule information. * @@ -2871,6 +2911,68 @@ enum nl80211_commands { * @NL80211_ATTR_VIF_RADIO_MASK: Bitmask of allowed radios (u32). * A value of 0 means all radios. * + * @NL80211_ATTR_SUPPORTED_SELECTORS: supported BSS Membership Selectors, array + * of supported selectors as defined by IEEE Std 802.11-2020 9.4.2.3 but + * without the length restriction (at most %NL80211_MAX_SUPP_SELECTORS). + * This can be used to provide a list of selectors that are implemented + * by the supplicant. If not given, support for SAE_H2E is assumed. + * + * @NL80211_ATTR_MLO_RECONF_REM_LINKS: (u16) A bitmask of the links requested + * to be removed from the MLO association. + * + * @NL80211_ATTR_EPCS: Flag attribute indicating that EPCS is enabled for a + * station interface. + * + * @NL80211_ATTR_ASSOC_MLD_EXT_CAPA_OPS: Extended MLD capabilities and + * operations that userspace implements to use during association/ML + * link reconfig, currently only "BTM MLD Recommendation For Multiple + * APs Support". Drivers may set additional flags that they support + * in the kernel or device. + * + * @NL80211_ATTR_WIPHY_RADIO_INDEX: (int) Integer attribute denoting the index + * of the radio in interest. Internally a value of -1 is used to + * indicate that the radio id is not given in user-space. This means + * that all the attributes are applicable to all the radios. If there is + * a radio index provided in user-space, the attributes will be + * applicable to that specific radio only. If the radio id is greater + * thank the number of radios, error denoting invalid value is returned. + * + * @NL80211_ATTR_S1G_LONG_BEACON_PERIOD: (u8) Integer attribute that represents + * the number of beacon intervals between each long beacon transmission + * for an S1G BSS with short beaconing enabled. This is a required + * attribute for initialising an S1G short beaconing BSS. When updating + * the short beacon data, this is not required. It has a minimum value of + * 2 (i.e 2 beacon intervals). + * + * @NL80211_ATTR_S1G_SHORT_BEACON: Nested attribute containing the short beacon + * head and tail used to set or update the short beacon templates. When + * bringing up a new interface, %NL80211_ATTR_S1G_LONG_BEACON_PERIOD is + * required alongside this attribute. Refer to + * @enum nl80211_s1g_short_beacon_attrs for the attribute definitions. + * + * @NL80211_ATTR_BSS_PARAM: nested attribute used with %NL80211_CMD_GET_WIPHY + * which indicates which BSS parameters can be modified. The attribute can + * also be used as flag attribute by user-space in %NL80211_CMD_SET_BSS to + * indicate that it wants strict checking on the BSS parameters to be + * modified. + * + * @NL80211_ATTR_NAN_CONFIG: Nested attribute for + * extended NAN cluster configuration. This is used with + * %NL80211_CMD_START_NAN and %NL80211_CMD_CHANGE_NAN_CONFIG. + * See &enum nl80211_nan_conf_attributes for details. + * This attribute is optional. + * @NL80211_ATTR_NAN_NEW_CLUSTER: Flag attribute indicating that a new + * NAN cluster has been created. This is used with + * %NL80211_CMD_NAN_CLUSTER_JOINED + * @NL80211_ATTR_NAN_CAPABILITIES: Nested attribute for NAN capabilities. + * This is used with %NL80211_CMD_GET_WIPHY to indicate the NAN + * capabilities supported by the driver. See &enum nl80211_nan_capabilities + * for details. + * + * @NL80211_ATTR_S1G_PRIMARY_2MHZ: flag attribute indicating that the S1G + * primary channel is 2 MHz wide, and the control channel designates + * the 1 MHz primary subchannel within that 2 MHz primary. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -3421,6 +3523,24 @@ enum nl80211_attrs { NL80211_ATTR_VIF_RADIO_MASK, + NL80211_ATTR_SUPPORTED_SELECTORS, + + NL80211_ATTR_MLO_RECONF_REM_LINKS, + NL80211_ATTR_EPCS, + + NL80211_ATTR_ASSOC_MLD_EXT_CAPA_OPS, + + NL80211_ATTR_WIPHY_RADIO_INDEX, + + NL80211_ATTR_S1G_LONG_BEACON_PERIOD, + NL80211_ATTR_S1G_SHORT_BEACON, + NL80211_ATTR_BSS_PARAM, + NL80211_ATTR_NAN_CONFIG, + NL80211_ATTR_NAN_NEW_CLUSTER, + NL80211_ATTR_NAN_CAPABILITIES, + + NL80211_ATTR_S1G_PRIMARY_2MHZ, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -3465,6 +3585,7 @@ enum nl80211_attrs { #define NL80211_WIPHY_NAME_MAXLEN 64 #define NL80211_MAX_SUPP_RATES 32 +#define NL80211_MAX_SUPP_SELECTORS 128 #define NL80211_MAX_SUPP_HT_RATES 77 #define NL80211_MAX_SUPP_REG_RULES 128 #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0 @@ -3666,6 +3787,22 @@ enum nl80211_eht_gi { }; /** + * enum nl80211_eht_ltf - EHT long training field + * @NL80211_RATE_INFO_EHT_1XLTF: 3.2 usec + * @NL80211_RATE_INFO_EHT_2XLTF: 6.4 usec + * @NL80211_RATE_INFO_EHT_4XLTF: 12.8 usec + * @NL80211_RATE_INFO_EHT_6XLTF: 19.2 usec + * @NL80211_RATE_INFO_EHT_8XLTF: 25.6 usec + */ +enum nl80211_eht_ltf { + NL80211_RATE_INFO_EHT_1XLTF, + NL80211_RATE_INFO_EHT_2XLTF, + NL80211_RATE_INFO_EHT_4XLTF, + NL80211_RATE_INFO_EHT_6XLTF, + NL80211_RATE_INFO_EHT_8XLTF, +}; + +/** * enum nl80211_eht_ru_alloc - EHT RU allocation values * @NL80211_RATE_INFO_EHT_RU_ALLOC_26: 26-tone RU allocation * @NL80211_RATE_INFO_EHT_RU_ALLOC_52: 52-tone RU allocation @@ -4299,6 +4436,14 @@ enum nl80211_wmm_rule { * otherwise completely disabled. * @NL80211_FREQUENCY_ATTR_ALLOW_6GHZ_VLP_AP: This channel can be used for a * very low power (VLP) AP, despite being NO_IR. + * @NL80211_FREQUENCY_ATTR_ALLOW_20MHZ_ACTIVITY: This channel can be active in + * 20 MHz bandwidth, despite being NO_IR. + * @NL80211_FREQUENCY_ATTR_NO_4MHZ: 4 MHz operation is not allowed on this + * channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_NO_8MHZ: 8 MHz operation is not allowed on this + * channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_NO_16MHZ: 16 MHz operation is not allowed on this + * channel in current regulatory domain. * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use @@ -4343,6 +4488,10 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT, NL80211_FREQUENCY_ATTR_CAN_MONITOR, NL80211_FREQUENCY_ATTR_ALLOW_6GHZ_VLP_AP, + NL80211_FREQUENCY_ATTR_ALLOW_20MHZ_ACTIVITY, + NL80211_FREQUENCY_ATTR_NO_4MHZ, + NL80211_FREQUENCY_ATTR_NO_8MHZ, + NL80211_FREQUENCY_ATTR_NO_16MHZ, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, @@ -4554,31 +4703,34 @@ enum nl80211_sched_scan_match_attr { * @NL80211_RRF_NO_6GHZ_AFC_CLIENT: Client connection to AFC AP not allowed * @NL80211_RRF_ALLOW_6GHZ_VLP_AP: Very low power (VLP) AP can be permitted * despite NO_IR configuration. + * @NL80211_RRF_ALLOW_20MHZ_ACTIVITY: Allow activity in 20 MHz bandwidth, + * despite NO_IR configuration. */ enum nl80211_reg_rule_flags { - NL80211_RRF_NO_OFDM = 1<<0, - NL80211_RRF_NO_CCK = 1<<1, - NL80211_RRF_NO_INDOOR = 1<<2, - NL80211_RRF_NO_OUTDOOR = 1<<3, - NL80211_RRF_DFS = 1<<4, - NL80211_RRF_PTP_ONLY = 1<<5, - NL80211_RRF_PTMP_ONLY = 1<<6, - NL80211_RRF_NO_IR = 1<<7, - __NL80211_RRF_NO_IBSS = 1<<8, - NL80211_RRF_AUTO_BW = 1<<11, - NL80211_RRF_IR_CONCURRENT = 1<<12, - NL80211_RRF_NO_HT40MINUS = 1<<13, - NL80211_RRF_NO_HT40PLUS = 1<<14, - NL80211_RRF_NO_80MHZ = 1<<15, - NL80211_RRF_NO_160MHZ = 1<<16, - NL80211_RRF_NO_HE = 1<<17, - NL80211_RRF_NO_320MHZ = 1<<18, - NL80211_RRF_NO_EHT = 1<<19, - NL80211_RRF_PSD = 1<<20, - NL80211_RRF_DFS_CONCURRENT = 1<<21, - NL80211_RRF_NO_6GHZ_VLP_CLIENT = 1<<22, - NL80211_RRF_NO_6GHZ_AFC_CLIENT = 1<<23, - NL80211_RRF_ALLOW_6GHZ_VLP_AP = 1<<24, + NL80211_RRF_NO_OFDM = 1 << 0, + NL80211_RRF_NO_CCK = 1 << 1, + NL80211_RRF_NO_INDOOR = 1 << 2, + NL80211_RRF_NO_OUTDOOR = 1 << 3, + NL80211_RRF_DFS = 1 << 4, + NL80211_RRF_PTP_ONLY = 1 << 5, + NL80211_RRF_PTMP_ONLY = 1 << 6, + NL80211_RRF_NO_IR = 1 << 7, + __NL80211_RRF_NO_IBSS = 1 << 8, + NL80211_RRF_AUTO_BW = 1 << 11, + NL80211_RRF_IR_CONCURRENT = 1 << 12, + NL80211_RRF_NO_HT40MINUS = 1 << 13, + NL80211_RRF_NO_HT40PLUS = 1 << 14, + NL80211_RRF_NO_80MHZ = 1 << 15, + NL80211_RRF_NO_160MHZ = 1 << 16, + NL80211_RRF_NO_HE = 1 << 17, + NL80211_RRF_NO_320MHZ = 1 << 18, + NL80211_RRF_NO_EHT = 1 << 19, + NL80211_RRF_PSD = 1 << 20, + NL80211_RRF_DFS_CONCURRENT = 1 << 21, + NL80211_RRF_NO_6GHZ_VLP_CLIENT = 1 << 22, + NL80211_RRF_NO_6GHZ_AFC_CLIENT = 1 << 23, + NL80211_RRF_ALLOW_6GHZ_VLP_AP = 1 << 24, + NL80211_RRF_ALLOW_20MHZ_ACTIVITY = 1 << 25, }; #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR @@ -4699,8 +4851,8 @@ enum nl80211_survey_info { * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP * @NL80211_MNTR_FLAG_CONTROL: pass control frames * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering - * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing. - * overrides all other flags. + * @NL80211_MNTR_FLAG_COOK_FRAMES: deprecated + * will unconditionally be refused * @NL80211_MNTR_FLAG_ACTIVE: use the configured MAC address * and ACK incoming unicast packets. * @NL80211_MNTR_FLAG_SKIP_TX: do not pass local tx packets @@ -5405,6 +5557,10 @@ enum nl80211_key_attributes { * see &struct nl80211_txrate_he * @NL80211_TXRATE_HE_GI: configure HE GI, 0.8us, 1.6us and 3.2us. * @NL80211_TXRATE_HE_LTF: configure HE LTF, 1XLTF, 2XLTF and 4XLTF. + * @NL80211_TXRATE_EHT: EHT rates allowed for TX rate selection, + * see &struct nl80211_txrate_eht + * @NL80211_TXRATE_EHT_GI: configure EHT GI, (u8, see &enum nl80211_eht_gi) + * @NL80211_TXRATE_EHT_LTF: configure EHT LTF, (u8, see &enum nl80211_eht_ltf) * @__NL80211_TXRATE_AFTER_LAST: internal * @NL80211_TXRATE_MAX: highest TX rate attribute */ @@ -5417,6 +5573,9 @@ enum nl80211_tx_rate_attributes { NL80211_TXRATE_HE, NL80211_TXRATE_HE_GI, NL80211_TXRATE_HE_LTF, + NL80211_TXRATE_EHT, + NL80211_TXRATE_EHT_GI, + NL80211_TXRATE_EHT_LTF, /* keep last */ __NL80211_TXRATE_AFTER_LAST, @@ -5449,6 +5608,15 @@ enum nl80211_txrate_gi { NL80211_TXRATE_FORCE_LGI, }; +#define NL80211_EHT_NSS_MAX 16 +/** + * struct nl80211_txrate_eht - EHT MCS/NSS txrate bitmap + * @mcs: MCS bitmap table for each NSS (array index 0 for 1 stream, etc.) + */ +struct nl80211_txrate_eht { + __u16 mcs[NL80211_EHT_NSS_MAX]; +}; + /** * enum nl80211_band - Frequency band * @NL80211_BAND_2GHZ: 2.4 GHz ISM band @@ -6573,6 +6741,9 @@ enum nl80211_feature_flags { * (signaling and payload protected) A-MSDUs and this shall be advertised * in the RSNXE. * + * @NL80211_EXT_FEATURE_BEACON_RATE_EHT: Driver supports beacon rate + * configuration (AP/mesh) with EHT rates. + * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. */ @@ -6648,6 +6819,7 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_OWE_OFFLOAD_AP, NL80211_EXT_FEATURE_DFS_CONCURRENT, NL80211_EXT_FEATURE_SPP_AMSDU_SUPPORT, + NL80211_EXT_FEATURE_BEACON_RATE_EHT, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, @@ -7203,6 +7375,105 @@ enum nl80211_nan_match_attributes { }; /** + * enum nl80211_nan_band_conf_attributes - NAN band configuration attributes + * @__NL80211_NAN_BAND_CONF_INVALID: Invalid. + * @NL80211_NAN_BAND_CONF_BAND: Band for which the configuration is + * being set. The value is according to &enum nl80211_band (u8). + * @NL80211_NAN_BAND_CONF_FREQ: Discovery frequency. This attribute shall not + * be present on 2.4 GHZ band. On 5 GHz band its presence is optional. + * The allowed values are 5220 (channel 44) or 5745 (channel 149). + * If not present, channel 149 is used if allowed, otherwise channel 44 + * will be selected. The value is in MHz (u16). + * @NL80211_NAN_BAND_CONF_RSSI_CLOSE: RSSI close threshold used for NAN state + * transition algorithm as described in chapters 3.3.6 and 3.3.7 "NAN + * Device Role and State Transition" of Wi-Fi Aware (TM) Specification + * v4.0. If not specified, default device value is used. The value should + * be greater than -60 dBm (s8). + * @NL80211_NAN_BAND_CONF_RSSI_MIDDLE: RSSI middle threshold used for NAN state + * transition algorithm as described in chapters 3.3.6 and 3.3.7 "NAN + * Device Role and State Transition" of Wi-Fi Aware (TM) Specification + * v4.0. If not present, default device value is used. The value should be + * greater than -75 dBm and less than %NL80211_NAN_BAND_CONF_RSSI_CLOSE + * (s8). + * @NL80211_NAN_BAND_CONF_WAKE_DW: Committed DW information (values 0-5). + * Value 0 means that the device will not wake up during the + * discovery window. Values 1-5 mean that the device will wake up + * during each 2^(n - 1) discovery window, where n is the value of + * this attribute. Setting this attribute to 0 is not allowed on + * 2.4 GHz band (u8). This is an optional parameter (default is 1). + * @NL80211_NAN_BAND_CONF_DISABLE_SCAN: Optional flag attribute to disable + * scanning (for cluster merge) on the band. If set, the device will not + * scan on this band anymore. Disabling scanning on 2.4 GHz band is not + * allowed. + * @NUM_NL80211_NAN_BAND_CONF_ATTR: Internal. + * @NL80211_NAN_BAND_CONF_ATTR_MAX: Highest NAN band configuration attribute. + * + * These attributes are used to configure NAN band-specific parameters. Note, + * that both RSSI attributes should be configured (or both left unset). + */ +enum nl80211_nan_band_conf_attributes { + __NL80211_NAN_BAND_CONF_INVALID, + NL80211_NAN_BAND_CONF_BAND, + NL80211_NAN_BAND_CONF_FREQ, + NL80211_NAN_BAND_CONF_RSSI_CLOSE, + NL80211_NAN_BAND_CONF_RSSI_MIDDLE, + NL80211_NAN_BAND_CONF_WAKE_DW, + NL80211_NAN_BAND_CONF_DISABLE_SCAN, + + /* keep last */ + NUM_NL80211_NAN_BAND_CONF_ATTR, + NL80211_NAN_BAND_CONF_ATTR_MAX = NUM_NL80211_NAN_BAND_CONF_ATTR - 1, +}; + +/** + * enum nl80211_nan_conf_attributes - NAN configuration attributes + * @__NL80211_NAN_CONF_INVALID: Invalid attribute, used for validation. + * @NL80211_NAN_CONF_CLUSTER_ID: ID for the NAN cluster. This is a MAC + * address that can take values from 50-6F-9A-01-00-00 to + * 50-6F-9A-01-FF-FF. This attribute is optional. If not present, + * a random Cluster ID will be chosen. + * @NL80211_NAN_CONF_EXTRA_ATTRS: Additional NAN attributes to be + * published in the beacons. This is an optional byte array. + * @NL80211_NAN_CONF_VENDOR_ELEMS: Vendor-specific elements that will + * be published in the beacons. This is an optional byte array. + * @NL80211_NAN_CONF_BAND_CONFIGS: This is a nested array attribute, + * containing multiple entries for each supported band. Each band + * configuration consists of &enum nl80211_nan_band_conf_attributes. + * @NL80211_NAN_CONF_SCAN_PERIOD: Scan period in seconds. If not configured, + * device default is used. Zero value will disable scanning. + * This is u16 (optional). + * @NL80211_NAN_CONF_SCAN_DWELL_TIME: Scan dwell time in TUs per channel. + * Only non-zero values are valid. If not configured the device default + * value is used. This is u16 (optional) + * @NL80211_NAN_CONF_DISCOVERY_BEACON_INTERVAL: Discovery beacon interval + * in TUs. Valid range is 50-200 TUs. If not configured the device default + * value is used. This is u8 (optional) + * @NL80211_NAN_CONF_NOTIFY_DW: If set, the driver will notify userspace about + * the upcoming discovery window with + * %NL80211_CMD_NAN_NEXT_DW_NOTIFICATION. + * This is a flag attribute. + * @NUM_NL80211_NAN_CONF_ATTR: Internal. + * @NL80211_NAN_CONF_ATTR_MAX: Highest NAN configuration attribute. + * + * These attributes are used to configure NAN-specific parameters. + */ +enum nl80211_nan_conf_attributes { + __NL80211_NAN_CONF_INVALID, + NL80211_NAN_CONF_CLUSTER_ID, + NL80211_NAN_CONF_EXTRA_ATTRS, + NL80211_NAN_CONF_VENDOR_ELEMS, + NL80211_NAN_CONF_BAND_CONFIGS, + NL80211_NAN_CONF_SCAN_PERIOD, + NL80211_NAN_CONF_SCAN_DWELL_TIME, + NL80211_NAN_CONF_DISCOVERY_BEACON_INTERVAL, + NL80211_NAN_CONF_NOTIFY_DW, + + /* keep last */ + NUM_NL80211_NAN_CONF_ATTR, + NL80211_NAN_CONF_ATTR_MAX = NUM_NL80211_NAN_CONF_ATTR - 1, +}; + +/** * enum nl80211_external_auth_action - Action to perform with external * authentication request. Used by NL80211_ATTR_EXTERNAL_AUTH_ACTION. * @NL80211_EXTERNAL_AUTH_START: Start the authentication. @@ -7994,6 +8265,11 @@ enum nl80211_sar_specs_attrs { * Setting this flag is permitted only if the driver advertises EMA support * by setting wiphy->ema_max_profile_periodicity to non-zero. * + * @NL80211_MBSSID_CONFIG_ATTR_TX_LINK_ID: Link ID of the transmitted profile. + * This parameter is mandatory when NL80211_ATTR_MBSSID_CONFIG attributes + * are sent for a non-transmitted profile and if the transmitted profile + * is part of an MLD. For all other cases this parameter is unnecessary. + * * @__NL80211_MBSSID_CONFIG_ATTR_LAST: Internal * @NL80211_MBSSID_CONFIG_ATTR_MAX: highest attribute */ @@ -8005,6 +8281,7 @@ enum nl80211_mbssid_config_attributes { NL80211_MBSSID_CONFIG_ATTR_INDEX, NL80211_MBSSID_CONFIG_ATTR_TX_IFINDEX, NL80211_MBSSID_CONFIG_ATTR_EMA, + NL80211_MBSSID_CONFIG_ATTR_TX_LINK_ID, /* keep last */ __NL80211_MBSSID_CONFIG_ATTR_LAST, @@ -8040,6 +8317,7 @@ enum nl80211_ap_settings_flags { * and contains attributes defined in &enum nl80211_if_combination_attrs. * @NL80211_WIPHY_RADIO_ATTR_ANTENNA_MASK: bitmask (u32) of antennas * connected to this radio. + * @NL80211_WIPHY_RADIO_ATTR_RTS_THRESHOLD: RTS threshold (u32) of this radio. * * @__NL80211_WIPHY_RADIO_ATTR_LAST: Internal * @NL80211_WIPHY_RADIO_ATTR_MAX: Highest attribute @@ -8051,6 +8329,7 @@ enum nl80211_wiphy_radio_attrs { NL80211_WIPHY_RADIO_ATTR_FREQ_RANGE, NL80211_WIPHY_RADIO_ATTR_INTERFACE_COMBINATION, NL80211_WIPHY_RADIO_ATTR_ANTENNA_MASK, + NL80211_WIPHY_RADIO_ATTR_RTS_THRESHOLD, /* keep last */ __NL80211_WIPHY_RADIO_ATTR_LAST, @@ -8080,4 +8359,77 @@ enum nl80211_wiphy_radio_freq_range { NL80211_WIPHY_RADIO_FREQ_ATTR_MAX = __NL80211_WIPHY_RADIO_FREQ_ATTR_LAST - 1, }; +/** + * enum nl80211_s1g_short_beacon_attrs - S1G short beacon data + * + * @__NL80211_S1G_SHORT_BEACON_ATTR_INVALID: Invalid + * + * @NL80211_S1G_SHORT_BEACON_ATTR_HEAD: Short beacon head (binary). + * @NL80211_S1G_SHORT_BEACON_ATTR_TAIL: Short beacon tail (binary). + * + * @__NL80211_S1G_SHORT_BEACON_ATTR_LAST: Internal + * @NL80211_S1G_SHORT_BEACON_ATTR_MAX: Highest attribute + */ +enum nl80211_s1g_short_beacon_attrs { + __NL80211_S1G_SHORT_BEACON_ATTR_INVALID, + + NL80211_S1G_SHORT_BEACON_ATTR_HEAD, + NL80211_S1G_SHORT_BEACON_ATTR_TAIL, + + /* keep last */ + __NL80211_S1G_SHORT_BEACON_ATTR_LAST, + NL80211_S1G_SHORT_BEACON_ATTR_MAX = + __NL80211_S1G_SHORT_BEACON_ATTR_LAST - 1 +}; + +/** + * enum nl80211_nan_capabilities - NAN (Neighbor Aware Networking) + * capabilities. + * + * @__NL80211_NAN_CAPABILITIES_INVALID: Invalid. + * @NL80211_NAN_CAPA_CONFIGURABLE_SYNC: Flag attribute indicating that + * the device supports configurable synchronization. If set, the device + * should be able to handle %NL80211_ATTR_NAN_CONFIG + * attribute in the %NL80211_CMD_START_NAN (and change) command. + * @NL80211_NAN_CAPA_USERSPACE_DE: Flag attribute indicating that + * NAN Discovery Engine (DE) is not offloaded and the driver assumes + * user space DE implementation. When set, %NL80211_CMD_ADD_NAN_FUNCTION, + * %NL80211_CMD_DEL_NAN_FUNCTION and %NL80211_CMD_NAN_MATCH commands + * should not be used. In addition, the device/driver should support + * sending discovery window (DW) notifications using + * %NL80211_CMD_NAN_NEXT_DW_NOTIFICATION and handling transmission and + * reception of NAN SDF frames on NAN device interface during DW windows. + * (%NL80211_CMD_FRAME is used to transmit SDFs) + * @NL80211_NAN_CAPA_OP_MODE: u8 attribute indicating the supported operation + * modes as defined in Wi-Fi Aware (TM) specification Table 81 (Operation + * Mode field format). + * @NL80211_NAN_CAPA_NUM_ANTENNAS: u8 attribute indicating the number of + * TX and RX antennas supported by the device. Lower nibble indicates + * the number of TX antennas and upper nibble indicates the number of RX + * antennas. Value 0 indicates the information is not available. + * See table 79 of Wi-Fi Aware (TM) specification (Number of + * Antennas field). + * @NL80211_NAN_CAPA_MAX_CHANNEL_SWITCH_TIME: u16 attribute indicating the + * maximum time in microseconds that the device requires to switch + * channels. + * @NL80211_NAN_CAPA_CAPABILITIES: u8 attribute containing the + * capabilities of the device as defined in Wi-Fi Aware (TM) + * specification Table 79 (Capabilities field). + * @__NL80211_NAN_CAPABILITIES_LAST: Internal + * @NL80211_NAN_CAPABILITIES_MAX: Highest NAN capability attribute. + */ +enum nl80211_nan_capabilities { + __NL80211_NAN_CAPABILITIES_INVALID, + + NL80211_NAN_CAPA_CONFIGURABLE_SYNC, + NL80211_NAN_CAPA_USERSPACE_DE, + NL80211_NAN_CAPA_OP_MODE, + NL80211_NAN_CAPA_NUM_ANTENNAS, + NL80211_NAN_CAPA_MAX_CHANNEL_SWITCH_TIME, + NL80211_NAN_CAPA_CAPABILITIES, + /* keep last */ + __NL80211_NAN_CAPABILITIES_LAST, + NL80211_NAN_CAPABILITIES_MAX = __NL80211_NAN_CAPABILITIES_LAST - 1, +}; + #endif /* __LINUX_NL80211_H */ |