summaryrefslogtreecommitdiff
path: root/kernel/time/clocksource.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/time/clocksource.c')
-rw-r--r--kernel/time/clocksource.c74
1 files changed, 59 insertions, 15 deletions
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index cf52fda2e096..d3ad022136e5 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -492,6 +492,22 @@ void clocksource_touch_watchdog(void)
}
/**
+ * clocksource_max_adjustment- Returns max adjustment amount
+ * @cs: Pointer to clocksource
+ *
+ */
+static u32 clocksource_max_adjustment(struct clocksource *cs)
+{
+ u64 ret;
+ /*
+ * We won't try to correct for more then 11% adjustments (110,000 ppm),
+ */
+ ret = (u64)cs->mult * 11;
+ do_div(ret,100);
+ return (u32)ret;
+}
+
+/**
* clocksource_max_deferment - Returns max time the clocksource can be deferred
* @cs: Pointer to clocksource
*
@@ -503,25 +519,28 @@ static u64 clocksource_max_deferment(struct clocksource *cs)
/*
* Calculate the maximum number of cycles that we can pass to the
* cyc2ns function without overflowing a 64-bit signed result. The
- * maximum number of cycles is equal to ULLONG_MAX/cs->mult which
- * is equivalent to the below.
- * max_cycles < (2^63)/cs->mult
- * max_cycles < 2^(log2((2^63)/cs->mult))
- * max_cycles < 2^(log2(2^63) - log2(cs->mult))
- * max_cycles < 2^(63 - log2(cs->mult))
- * max_cycles < 1 << (63 - log2(cs->mult))
+ * maximum number of cycles is equal to ULLONG_MAX/(cs->mult+cs->maxadj)
+ * which is equivalent to the below.
+ * max_cycles < (2^63)/(cs->mult + cs->maxadj)
+ * max_cycles < 2^(log2((2^63)/(cs->mult + cs->maxadj)))
+ * max_cycles < 2^(log2(2^63) - log2(cs->mult + cs->maxadj))
+ * max_cycles < 2^(63 - log2(cs->mult + cs->maxadj))
+ * max_cycles < 1 << (63 - log2(cs->mult + cs->maxadj))
* Please note that we add 1 to the result of the log2 to account for
* any rounding errors, ensure the above inequality is satisfied and
* no overflow will occur.
*/
- max_cycles = 1ULL << (63 - (ilog2(cs->mult) + 1));
+ max_cycles = 1ULL << (63 - (ilog2(cs->mult + cs->maxadj) + 1));
/*
* The actual maximum number of cycles we can defer the clocksource is
* determined by the minimum of max_cycles and cs->mask.
+ * Note: Here we subtract the maxadj to make sure we don't sleep for
+ * too long if there's a large negative adjustment.
*/
max_cycles = min_t(u64, max_cycles, (u64) cs->mask);
- max_nsecs = clocksource_cyc2ns(max_cycles, cs->mult, cs->shift);
+ max_nsecs = clocksource_cyc2ns(max_cycles, cs->mult - cs->maxadj,
+ cs->shift);
/*
* To ensure that the clocksource does not wrap whilst we are idle,
@@ -529,7 +548,7 @@ static u64 clocksource_max_deferment(struct clocksource *cs)
* note a margin of 12.5% is used because this can be computed with
* a shift, versus say 10% which would require division.
*/
- return max_nsecs - (max_nsecs >> 5);
+ return max_nsecs - (max_nsecs >> 3);
}
#ifndef CONFIG_ARCH_USES_GETTIMEOFFSET
@@ -628,7 +647,7 @@ static void clocksource_enqueue(struct clocksource *cs)
/**
* __clocksource_updatefreq_scale - Used update clocksource with new freq
- * @t: clocksource to be registered
+ * @cs: clocksource to be registered
* @scale: Scale factor multiplied against freq to get clocksource hz
* @freq: clocksource frequency (cycles per second) divided by scale
*
@@ -640,7 +659,6 @@ static void clocksource_enqueue(struct clocksource *cs)
void __clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq)
{
u64 sec;
-
/*
* Calc the maximum number of seconds which we can run before
* wrapping around. For clocksources which have a mask > 32bit
@@ -651,7 +669,7 @@ void __clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq)
* ~ 0.06ppm granularity for NTP. We apply the same 12.5%
* margin as we do in clocksource_max_deferment()
*/
- sec = (cs->mask - (cs->mask >> 5));
+ sec = (cs->mask - (cs->mask >> 3));
do_div(sec, freq);
do_div(sec, scale);
if (!sec)
@@ -661,13 +679,27 @@ void __clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq)
clocks_calc_mult_shift(&cs->mult, &cs->shift, freq,
NSEC_PER_SEC / scale, sec * scale);
+
+ /*
+ * for clocksources that have large mults, to avoid overflow.
+ * Since mult may be adjusted by ntp, add an safety extra margin
+ *
+ */
+ cs->maxadj = clocksource_max_adjustment(cs);
+ while ((cs->mult + cs->maxadj < cs->mult)
+ || (cs->mult - cs->maxadj > cs->mult)) {
+ cs->mult >>= 1;
+ cs->shift--;
+ cs->maxadj = clocksource_max_adjustment(cs);
+ }
+
cs->max_idle_ns = clocksource_max_deferment(cs);
}
EXPORT_SYMBOL_GPL(__clocksource_updatefreq_scale);
/**
* __clocksource_register_scale - Used to install new clocksources
- * @t: clocksource to be registered
+ * @cs: clocksource to be registered
* @scale: Scale factor multiplied against freq to get clocksource hz
* @freq: clocksource frequency (cycles per second) divided by scale
*
@@ -695,12 +727,18 @@ EXPORT_SYMBOL_GPL(__clocksource_register_scale);
/**
* clocksource_register - Used to install new clocksources
- * @t: clocksource to be registered
+ * @cs: clocksource to be registered
*
* Returns -EBUSY if registration fails, zero otherwise.
*/
int clocksource_register(struct clocksource *cs)
{
+ /* calculate max adjustment for given mult/shift */
+ cs->maxadj = clocksource_max_adjustment(cs);
+ WARN_ONCE(cs->mult + cs->maxadj < cs->mult,
+ "Clocksource %s might overflow on 11%% adjustment\n",
+ cs->name);
+
/* calculate max idle time permitted for this clocksource */
cs->max_idle_ns = clocksource_max_deferment(cs);
@@ -723,6 +761,8 @@ static void __clocksource_change_rating(struct clocksource *cs, int rating)
/**
* clocksource_change_rating - Change the rating of a registered clocksource
+ * @cs: clocksource to be changed
+ * @rating: new rating
*/
void clocksource_change_rating(struct clocksource *cs, int rating)
{
@@ -734,6 +774,7 @@ EXPORT_SYMBOL(clocksource_change_rating);
/**
* clocksource_unregister - remove a registered clocksource
+ * @cs: clocksource to be unregistered
*/
void clocksource_unregister(struct clocksource *cs)
{
@@ -749,6 +790,7 @@ EXPORT_SYMBOL(clocksource_unregister);
/**
* sysfs_show_current_clocksources - sysfs interface for current clocksource
* @dev: unused
+ * @attr: unused
* @buf: char buffer to be filled with clocksource list
*
* Provides sysfs interface for listing current clocksource.
@@ -769,6 +811,7 @@ sysfs_show_current_clocksources(struct sys_device *dev,
/**
* sysfs_override_clocksource - interface for manually overriding clocksource
* @dev: unused
+ * @attr: unused
* @buf: name of override clocksource
* @count: length of buffer
*
@@ -804,6 +847,7 @@ static ssize_t sysfs_override_clocksource(struct sys_device *dev,
/**
* sysfs_show_available_clocksources - sysfs interface for listing clocksource
* @dev: unused
+ * @attr: unused
* @buf: char buffer to be filled with clocksource list
*
* Provides sysfs interface for listing registered clocksources