diff options
Diffstat (limited to 'net/mac80211/Kconfig')
| -rw-r--r-- | net/mac80211/Kconfig | 99 |
1 files changed, 47 insertions, 52 deletions
diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig index 76e30f4797fb..cf0f7780fb10 100644 --- a/net/mac80211/Kconfig +++ b/net/mac80211/Kconfig @@ -1,14 +1,15 @@ +# SPDX-License-Identifier: GPL-2.0-only config MAC80211 tristate "Generic IEEE 802.11 Networking Stack (mac80211)" depends on CFG80211 select CRYPTO - select CRYPTO_ARC4 + select CRYPTO_LIB_ARC4 select CRYPTO_AES select CRYPTO_CCM select CRYPTO_GCM select CRYPTO_CMAC select CRC32 - ---help--- + help This option enables the hardware independent IEEE 802.11 networking stack. @@ -24,28 +25,14 @@ config MAC80211_RC_MINSTREL bool "Minstrel" if EXPERT select MAC80211_HAS_RC default y - ---help--- + help This option enables the 'minstrel' TX rate control algorithm -config MAC80211_RC_MINSTREL_HT - bool "Minstrel 802.11n support" if EXPERT - depends on MAC80211_RC_MINSTREL - default y - ---help--- - This option enables the 'minstrel_ht' TX rate control algorithm - -config MAC80211_RC_MINSTREL_VHT - bool "Minstrel 802.11ac support" if EXPERT - depends on MAC80211_RC_MINSTREL_HT - default n - ---help--- - This option enables VHT in the 'minstrel_ht' TX rate control algorithm - choice prompt "Default rate control algorithm" depends on MAC80211_HAS_RC default MAC80211_RC_DEFAULT_MINSTREL - ---help--- + help This option selects the default rate control algorithm mac80211 will use. Note that this default can still be overridden through the ieee80211_default_rc_algo module @@ -54,7 +41,7 @@ choice config MAC80211_RC_DEFAULT_MINSTREL bool "Minstrel" depends on MAC80211_RC_MINSTREL - ---help--- + help Select Minstrel as the default rate control algorithm. @@ -62,8 +49,7 @@ endchoice config MAC80211_RC_DEFAULT string - default "minstrel_ht" if MAC80211_RC_DEFAULT_MINSTREL && MAC80211_RC_MINSTREL_HT - default "minstrel" if MAC80211_RC_DEFAULT_MINSTREL + default "minstrel_ht" if MAC80211_RC_DEFAULT_MINSTREL default "" endif @@ -71,29 +57,38 @@ endif comment "Some wireless drivers require a rate control algorithm" depends on MAC80211 && MAC80211_HAS_RC=n +config MAC80211_KUNIT_TEST + tristate "KUnit tests for mac80211" if !KUNIT_ALL_TESTS + depends on KUNIT + depends on MAC80211 + default KUNIT_ALL_TESTS + help + Enable this option to test mac80211 internals with kunit. + + If unsure, say N. + config MAC80211_MESH - bool "Enable mac80211 mesh networking (pre-802.11s) support" + bool "Enable mac80211 mesh networking support" depends on MAC80211 - ---help--- - This options enables support of Draft 802.11s mesh networking. - The implementation is based on Draft 2.08 of the Mesh Networking - amendment. However, no compliance with that draft is claimed or even - possible, as drafts leave a number of identifiers to be defined after - ratification. For more information visit http://o11s.org/. + help + Select this option to enable 802.11 mesh operation in mac80211 + drivers that support it. 802.11 mesh connects multiple stations + over (possibly multi-hop) wireless links to form a single logical + LAN. config MAC80211_LEDS bool "Enable LED triggers" depends on MAC80211 - depends on LEDS_CLASS + depends on LEDS_CLASS=y || LEDS_CLASS=MAC80211 select LEDS_TRIGGERS - ---help--- + help This option enables a few LED triggers for different packet receive/transmit events. config MAC80211_DEBUGFS bool "Export mac80211 internals in DebugFS" - depends on MAC80211 && DEBUG_FS - ---help--- + depends on MAC80211 && CFG80211_DEBUGFS + help Select this to see extensive information about the internal state of mac80211 in debugfs. @@ -101,8 +96,8 @@ config MAC80211_DEBUGFS config MAC80211_MESSAGE_TRACING bool "Trace all mac80211 debug messages" - depends on MAC80211 - ---help--- + depends on MAC80211 && TRACING + help Select this option to have mac80211 register the mac80211_msg trace subsystem with tracepoints to collect all debugging messages, independent of @@ -115,13 +110,13 @@ config MAC80211_MESSAGE_TRACING menuconfig MAC80211_DEBUG_MENU bool "Select mac80211 debugging features" depends on MAC80211 - ---help--- + help This option collects various mac80211 debug settings. config MAC80211_NOINLINE bool "Do not inline TX/RX handlers" depends on MAC80211_DEBUG_MENU - ---help--- + help This option affects code generation in mac80211, when selected some functions are marked "noinline" to allow easier debugging of problems in the transmit and receive @@ -137,7 +132,7 @@ config MAC80211_NOINLINE config MAC80211_VERBOSE_DEBUG bool "Verbose debugging output" depends on MAC80211_DEBUG_MENU - ---help--- + help Selecting this option causes mac80211 to print out many debugging messages. It should not be selected on production systems as some of the messages are @@ -148,7 +143,7 @@ config MAC80211_VERBOSE_DEBUG config MAC80211_MLME_DEBUG bool "Verbose managed MLME output" depends on MAC80211_DEBUG_MENU - ---help--- + help Selecting this option causes mac80211 to print out debugging messages for the managed-mode MLME. It should not be selected on production systems as some @@ -159,7 +154,7 @@ config MAC80211_MLME_DEBUG config MAC80211_STA_DEBUG bool "Verbose station debugging" depends on MAC80211_DEBUG_MENU - ---help--- + help Selecting this option causes mac80211 to print out debugging messages for station addition/removal. @@ -168,7 +163,7 @@ config MAC80211_STA_DEBUG config MAC80211_HT_DEBUG bool "Verbose HT debugging" depends on MAC80211_DEBUG_MENU - ---help--- + help This option enables 802.11n High Throughput features debug tracing output. @@ -180,7 +175,7 @@ config MAC80211_HT_DEBUG config MAC80211_OCB_DEBUG bool "Verbose OCB debugging" depends on MAC80211_DEBUG_MENU - ---help--- + help Selecting this option causes mac80211 to print out very verbose OCB debugging messages. It should not be selected on production systems as those messages @@ -191,7 +186,7 @@ config MAC80211_OCB_DEBUG config MAC80211_IBSS_DEBUG bool "Verbose IBSS debugging" depends on MAC80211_DEBUG_MENU - ---help--- + help Selecting this option causes mac80211 to print out very verbose IBSS debugging messages. It should not be selected on production systems as those messages @@ -202,7 +197,7 @@ config MAC80211_IBSS_DEBUG config MAC80211_PS_DEBUG bool "Verbose powersave mode debugging" depends on MAC80211_DEBUG_MENU - ---help--- + help Selecting this option causes mac80211 to print out very verbose power save mode debugging messages (when mac80211 is an AP and has power saving stations.) @@ -215,7 +210,7 @@ config MAC80211_MPL_DEBUG bool "Verbose mesh peer link debugging" depends on MAC80211_DEBUG_MENU depends on MAC80211_MESH - ---help--- + help Selecting this option causes mac80211 to print out very verbose mesh peer link debugging messages (when mac80211 is taking part in a mesh network). @@ -228,7 +223,7 @@ config MAC80211_MPATH_DEBUG bool "Verbose mesh path debugging" depends on MAC80211_DEBUG_MENU depends on MAC80211_MESH - ---help--- + help Selecting this option causes mac80211 to print out very verbose mesh path selection debugging messages (when mac80211 is taking part in a mesh network). @@ -241,7 +236,7 @@ config MAC80211_MHWMP_DEBUG bool "Verbose mesh HWMP routing debugging" depends on MAC80211_DEBUG_MENU depends on MAC80211_MESH - ---help--- + help Selecting this option causes mac80211 to print out very verbose mesh routing (HWMP) debugging messages (when mac80211 is taking part in a mesh network). @@ -254,7 +249,7 @@ config MAC80211_MESH_SYNC_DEBUG bool "Verbose mesh synchronization debugging" depends on MAC80211_DEBUG_MENU depends on MAC80211_MESH - ---help--- + help Selecting this option causes mac80211 to print out very verbose mesh synchronization debugging messages (when mac80211 is taking part in a mesh network). @@ -265,7 +260,7 @@ config MAC80211_MESH_CSA_DEBUG bool "Verbose mesh channel switch debugging" depends on MAC80211_DEBUG_MENU depends on MAC80211_MESH - ---help--- + help Selecting this option causes mac80211 to print out very verbose mesh channel switch debugging messages (when mac80211 is taking part in a mesh network). @@ -276,7 +271,7 @@ config MAC80211_MESH_PS_DEBUG bool "Verbose mesh powersave debugging" depends on MAC80211_DEBUG_MENU depends on MAC80211_MESH - ---help--- + help Selecting this option causes mac80211 to print out very verbose mesh powersave debugging messages (when mac80211 is taking part in a mesh network). @@ -286,7 +281,7 @@ config MAC80211_MESH_PS_DEBUG config MAC80211_TDLS_DEBUG bool "Verbose TDLS debugging" depends on MAC80211_DEBUG_MENU - ---help--- + help Selecting this option causes mac80211 to print out very verbose TDLS selection debugging messages (when mac80211 is a TDLS STA). @@ -299,7 +294,7 @@ config MAC80211_DEBUG_COUNTERS bool "Extra statistics for TX/RX debugging" depends on MAC80211_DEBUG_MENU depends on MAC80211_DEBUGFS - ---help--- + help Selecting this option causes mac80211 to keep additional and very verbose statistics about TX and RX handler use as well as a few selected dot11 counters. These will be @@ -313,7 +308,7 @@ config MAC80211_DEBUG_COUNTERS config MAC80211_STA_HASH_MAX_SIZE int "Station hash table maximum size" if MAC80211_DEBUG_MENU default 0 - ---help--- + help Setting this option to a low value (e.g. 4) allows testing the hash table with collisions relatively deterministically (just connect more stations than the number selected here.) |