diff options
Diffstat (limited to 'net/mac80211/Kconfig')
| -rw-r--r-- | net/mac80211/Kconfig | 145 |
1 files changed, 84 insertions, 61 deletions
diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig index 62535fe9f570..cf0f7780fb10 100644 --- a/net/mac80211/Kconfig +++ b/net/mac80211/Kconfig @@ -1,12 +1,15 @@ +# SPDX-License-Identifier: GPL-2.0-only config MAC80211 tristate "Generic IEEE 802.11 Networking Stack (mac80211)" depends on CFG80211 select CRYPTO - select CRYPTO_ARC4 + select CRYPTO_LIB_ARC4 select CRYPTO_AES + select CRYPTO_CCM + select CRYPTO_GCM + select CRYPTO_CMAC select CRC32 - select AVERAGE - ---help--- + help This option enables the hardware independent IEEE 802.11 networking stack. @@ -18,50 +21,27 @@ if MAC80211 != n config MAC80211_HAS_RC bool -config MAC80211_RC_PID - bool "PID controller based rate control algorithm" if EXPERT - select MAC80211_HAS_RC - ---help--- - This option enables a TX rate control algorithm for - mac80211 that uses a PID controller to select the TX - rate. - config MAC80211_RC_MINSTREL bool "Minstrel" if EXPERT select MAC80211_HAS_RC default y - ---help--- + help This option enables the 'minstrel' TX rate control algorithm -config MAC80211_RC_MINSTREL_HT - bool "Minstrel 802.11n support" if EXPERT - depends on MAC80211_RC_MINSTREL - default y - ---help--- - This option enables the 'minstrel_ht' TX rate control algorithm - choice prompt "Default rate control algorithm" depends on MAC80211_HAS_RC default MAC80211_RC_DEFAULT_MINSTREL - ---help--- + help This option selects the default rate control algorithm mac80211 will use. Note that this default can still be overridden through the ieee80211_default_rc_algo module parameter if different algorithms are available. -config MAC80211_RC_DEFAULT_PID - bool "PID controller based rate control algorithm" - depends on MAC80211_RC_PID - ---help--- - Select the PID controller based rate control as the - default rate control algorithm. You should choose - this unless you know what you are doing. - config MAC80211_RC_DEFAULT_MINSTREL bool "Minstrel" depends on MAC80211_RC_MINSTREL - ---help--- + help Select Minstrel as the default rate control algorithm. @@ -69,9 +49,7 @@ endchoice config MAC80211_RC_DEFAULT string - default "minstrel_ht" if MAC80211_RC_DEFAULT_MINSTREL && MAC80211_RC_MINSTREL_HT - default "minstrel" if MAC80211_RC_DEFAULT_MINSTREL - default "pid" if MAC80211_RC_DEFAULT_PID + default "minstrel_ht" if MAC80211_RC_DEFAULT_MINSTREL default "" endif @@ -79,29 +57,38 @@ endif comment "Some wireless drivers require a rate control algorithm" depends on MAC80211 && MAC80211_HAS_RC=n +config MAC80211_KUNIT_TEST + tristate "KUnit tests for mac80211" if !KUNIT_ALL_TESTS + depends on KUNIT + depends on MAC80211 + default KUNIT_ALL_TESTS + help + Enable this option to test mac80211 internals with kunit. + + If unsure, say N. + config MAC80211_MESH - bool "Enable mac80211 mesh networking (pre-802.11s) support" + bool "Enable mac80211 mesh networking support" depends on MAC80211 - ---help--- - This options enables support of Draft 802.11s mesh networking. - The implementation is based on Draft 2.08 of the Mesh Networking - amendment. However, no compliance with that draft is claimed or even - possible, as drafts leave a number of identifiers to be defined after - ratification. For more information visit http://o11s.org/. + help + Select this option to enable 802.11 mesh operation in mac80211 + drivers that support it. 802.11 mesh connects multiple stations + over (possibly multi-hop) wireless links to form a single logical + LAN. config MAC80211_LEDS bool "Enable LED triggers" depends on MAC80211 - depends on LEDS_CLASS + depends on LEDS_CLASS=y || LEDS_CLASS=MAC80211 select LEDS_TRIGGERS - ---help--- + help This option enables a few LED triggers for different packet receive/transmit events. config MAC80211_DEBUGFS bool "Export mac80211 internals in DebugFS" - depends on MAC80211 && DEBUG_FS - ---help--- + depends on MAC80211 && CFG80211_DEBUGFS + help Select this to see extensive information about the internal state of mac80211 in debugfs. @@ -109,8 +96,8 @@ config MAC80211_DEBUGFS config MAC80211_MESSAGE_TRACING bool "Trace all mac80211 debug messages" - depends on MAC80211 - ---help--- + depends on MAC80211 && TRACING + help Select this option to have mac80211 register the mac80211_msg trace subsystem with tracepoints to collect all debugging messages, independent of @@ -123,13 +110,13 @@ config MAC80211_MESSAGE_TRACING menuconfig MAC80211_DEBUG_MENU bool "Select mac80211 debugging features" depends on MAC80211 - ---help--- + help This option collects various mac80211 debug settings. config MAC80211_NOINLINE bool "Do not inline TX/RX handlers" depends on MAC80211_DEBUG_MENU - ---help--- + help This option affects code generation in mac80211, when selected some functions are marked "noinline" to allow easier debugging of problems in the transmit and receive @@ -145,7 +132,7 @@ config MAC80211_NOINLINE config MAC80211_VERBOSE_DEBUG bool "Verbose debugging output" depends on MAC80211_DEBUG_MENU - ---help--- + help Selecting this option causes mac80211 to print out many debugging messages. It should not be selected on production systems as some of the messages are @@ -156,7 +143,7 @@ config MAC80211_VERBOSE_DEBUG config MAC80211_MLME_DEBUG bool "Verbose managed MLME output" depends on MAC80211_DEBUG_MENU - ---help--- + help Selecting this option causes mac80211 to print out debugging messages for the managed-mode MLME. It should not be selected on production systems as some @@ -167,7 +154,7 @@ config MAC80211_MLME_DEBUG config MAC80211_STA_DEBUG bool "Verbose station debugging" depends on MAC80211_DEBUG_MENU - ---help--- + help Selecting this option causes mac80211 to print out debugging messages for station addition/removal. @@ -176,7 +163,7 @@ config MAC80211_STA_DEBUG config MAC80211_HT_DEBUG bool "Verbose HT debugging" depends on MAC80211_DEBUG_MENU - ---help--- + help This option enables 802.11n High Throughput features debug tracing output. @@ -185,10 +172,21 @@ config MAC80211_HT_DEBUG Do not select this option. +config MAC80211_OCB_DEBUG + bool "Verbose OCB debugging" + depends on MAC80211_DEBUG_MENU + help + Selecting this option causes mac80211 to print out + very verbose OCB debugging messages. It should not + be selected on production systems as those messages + are remotely triggerable. + + Do not select this option. + config MAC80211_IBSS_DEBUG bool "Verbose IBSS debugging" depends on MAC80211_DEBUG_MENU - ---help--- + help Selecting this option causes mac80211 to print out very verbose IBSS debugging messages. It should not be selected on production systems as those messages @@ -199,7 +197,7 @@ config MAC80211_IBSS_DEBUG config MAC80211_PS_DEBUG bool "Verbose powersave mode debugging" depends on MAC80211_DEBUG_MENU - ---help--- + help Selecting this option causes mac80211 to print out very verbose power save mode debugging messages (when mac80211 is an AP and has power saving stations.) @@ -212,7 +210,7 @@ config MAC80211_MPL_DEBUG bool "Verbose mesh peer link debugging" depends on MAC80211_DEBUG_MENU depends on MAC80211_MESH - ---help--- + help Selecting this option causes mac80211 to print out very verbose mesh peer link debugging messages (when mac80211 is taking part in a mesh network). @@ -225,7 +223,7 @@ config MAC80211_MPATH_DEBUG bool "Verbose mesh path debugging" depends on MAC80211_DEBUG_MENU depends on MAC80211_MESH - ---help--- + help Selecting this option causes mac80211 to print out very verbose mesh path selection debugging messages (when mac80211 is taking part in a mesh network). @@ -238,7 +236,7 @@ config MAC80211_MHWMP_DEBUG bool "Verbose mesh HWMP routing debugging" depends on MAC80211_DEBUG_MENU depends on MAC80211_MESH - ---help--- + help Selecting this option causes mac80211 to print out very verbose mesh routing (HWMP) debugging messages (when mac80211 is taking part in a mesh network). @@ -251,18 +249,29 @@ config MAC80211_MESH_SYNC_DEBUG bool "Verbose mesh synchronization debugging" depends on MAC80211_DEBUG_MENU depends on MAC80211_MESH - ---help--- + help Selecting this option causes mac80211 to print out very verbose mesh synchronization debugging messages (when mac80211 is taking part in a mesh network). Do not select this option. +config MAC80211_MESH_CSA_DEBUG + bool "Verbose mesh channel switch debugging" + depends on MAC80211_DEBUG_MENU + depends on MAC80211_MESH + help + Selecting this option causes mac80211 to print out very verbose mesh + channel switch debugging messages (when mac80211 is taking part in a + mesh network). + + Do not select this option. + config MAC80211_MESH_PS_DEBUG bool "Verbose mesh powersave debugging" depends on MAC80211_DEBUG_MENU depends on MAC80211_MESH - ---help--- + help Selecting this option causes mac80211 to print out very verbose mesh powersave debugging messages (when mac80211 is taking part in a mesh network). @@ -272,7 +281,7 @@ config MAC80211_MESH_PS_DEBUG config MAC80211_TDLS_DEBUG bool "Verbose TDLS debugging" depends on MAC80211_DEBUG_MENU - ---help--- + help Selecting this option causes mac80211 to print out very verbose TDLS selection debugging messages (when mac80211 is a TDLS STA). @@ -285,9 +294,23 @@ config MAC80211_DEBUG_COUNTERS bool "Extra statistics for TX/RX debugging" depends on MAC80211_DEBUG_MENU depends on MAC80211_DEBUGFS - ---help--- + help Selecting this option causes mac80211 to keep additional and very verbose statistics about TX and RX handler use - and show them in debugfs. + as well as a few selected dot11 counters. These will be + exposed in debugfs. + + Note that some of the counters are not concurrency safe + and may thus not always be accurate. If unsure, say N. + +config MAC80211_STA_HASH_MAX_SIZE + int "Station hash table maximum size" if MAC80211_DEBUG_MENU + default 0 + help + Setting this option to a low value (e.g. 4) allows testing the + hash table with collisions relatively deterministically (just + connect more stations than the number selected here.) + + If unsure, leave the default of 0. |