diff options
Diffstat (limited to 'sound/pci/hda/Kconfig')
| -rw-r--r-- | sound/pci/hda/Kconfig | 266 |
1 files changed, 0 insertions, 266 deletions
diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig deleted file mode 100644 index 59c5e9c03d53..000000000000 --- a/sound/pci/hda/Kconfig +++ /dev/null @@ -1,266 +0,0 @@ -menuconfig SND_HDA_INTEL - tristate "Intel HD Audio" - select SND_PCM - select SND_VMASTER - select SND_KCTL_JACK - help - Say Y here to include support for Intel "High Definition - Audio" (Azalia) and its compatible devices. - - This option enables the HD-audio controller. Don't forget - to choose the appropriate codec options below. - - To compile this driver as a module, choose M here: the module - will be called snd-hda-intel. - -if SND_HDA_INTEL - -config SND_HDA_DSP_LOADER - bool - -config SND_HDA_PREALLOC_SIZE - int "Pre-allocated buffer size for HD-audio driver" - range 0 32768 - default 64 - help - Specifies the default pre-allocated buffer-size in kB for the - HD-audio driver. A larger buffer (e.g. 2048) is preferred - for systems using PulseAudio. The default 64 is chosen just - for compatibility reasons. - - Note that the pre-allocation size can be changed dynamically - via a proc file (/proc/asound/card*/pcm*/sub*/prealloc), too. - -config SND_HDA_HWDEP - bool "Build hwdep interface for HD-audio driver" - select SND_HWDEP - help - Say Y here to build a hwdep interface for HD-audio driver. - This interface can be used for out-of-band communication - with codecs for debugging purposes. - -config SND_HDA_RECONFIG - bool "Allow dynamic codec reconfiguration" - depends on SND_HDA_HWDEP - help - Say Y here to enable the HD-audio codec re-configuration feature. - This adds the sysfs interfaces to allow user to clear the whole - codec configuration, change the codec setup, add extra verbs, - and re-configure the codec dynamically. - -config SND_HDA_INPUT_BEEP - bool "Support digital beep via input layer" - depends on INPUT=y || INPUT=SND_HDA_INTEL - help - Say Y here to build a digital beep interface for HD-audio - driver. This interface is used to generate digital beeps. - -config SND_HDA_INPUT_BEEP_MODE - int "Digital beep registration mode (0=off, 1=on)" - depends on SND_HDA_INPUT_BEEP=y - default "1" - range 0 1 - help - Set 0 to disable the digital beep interface for HD-audio by default. - Set 1 to always enable the digital beep interface for HD-audio by - default. - -config SND_HDA_INPUT_JACK - bool "Support jack plugging notification via input layer" - depends on INPUT=y || INPUT=SND - select SND_JACK - help - Say Y here to enable the jack plugging notification via - input layer. - -config SND_HDA_PATCH_LOADER - bool "Support initialization patch loading for HD-audio" - select FW_LOADER - select SND_HDA_HWDEP - select SND_HDA_RECONFIG - help - Say Y here to allow the HD-audio driver to load a pseudo - firmware file ("patch") for overriding the BIOS setup at - start up. The "patch" file can be specified via patch module - option, such as patch=hda-init. - - This option turns on hwdep and reconfig features automatically. - -config SND_HDA_CODEC_REALTEK - bool "Build Realtek HD-audio codec support" - default y - select SND_HDA_GENERIC - help - Say Y here to include Realtek HD-audio codec support in - snd-hda-intel driver, such as ALC880. - - When the HD-audio driver is built as a module, the codec - support code is also built as another module, - snd-hda-codec-realtek. - This module is automatically loaded at probing. - -config SND_HDA_CODEC_ANALOG - bool "Build Analog Device HD-audio codec support" - default y - select SND_HDA_GENERIC - help - Say Y here to include Analog Device HD-audio codec support in - snd-hda-intel driver, such as AD1986A. - - When the HD-audio driver is built as a module, the codec - support code is also built as another module, - snd-hda-codec-analog. - This module is automatically loaded at probing. - -config SND_HDA_CODEC_SIGMATEL - bool "Build IDT/Sigmatel HD-audio codec support" - default y - select SND_HDA_GENERIC - help - Say Y here to include IDT (Sigmatel) HD-audio codec support in - snd-hda-intel driver, such as STAC9200. - - When the HD-audio driver is built as a module, the codec - support code is also built as another module, - snd-hda-codec-idt. - This module is automatically loaded at probing. - -config SND_HDA_CODEC_VIA - bool "Build VIA HD-audio codec support" - default y - select SND_HDA_GENERIC - help - Say Y here to include VIA HD-audio codec support in - snd-hda-intel driver, such as VT1708. - - When the HD-audio driver is built as a module, the codec - support code is also built as another module, - snd-hda-codec-via. - This module is automatically loaded at probing. - -config SND_HDA_CODEC_HDMI - bool "Build HDMI/DisplayPort HD-audio codec support" - default y - help - Say Y here to include HDMI and DisplayPort HD-audio codec - support in snd-hda-intel driver. This includes all AMD/ATI, - Intel and Nvidia HDMI/DisplayPort codecs. - - When the HD-audio driver is built as a module, the codec - support code is also built as another module, - snd-hda-codec-hdmi. - This module is automatically loaded at probing. - -config SND_HDA_I915 - bool "Build Display HD-audio controller/codec power well support for i915 cards" - depends on DRM_I915 - help - Say Y here to include full HDMI and DisplayPort HD-audio controller/codec - power-well support for Intel Haswell graphics cards based on the i915 driver. - - Note that this option must be enabled for Intel Haswell C+ stepping machines, otherwise - the GPU audio controller/codecs will not be initialized or damaged when exit from S3 mode. - -config SND_HDA_CODEC_CIRRUS - bool "Build Cirrus Logic codec support" - default y - select SND_HDA_GENERIC - help - Say Y here to include Cirrus Logic codec support in - snd-hda-intel driver, such as CS4206. - - When the HD-audio driver is built as a module, the codec - support code is also built as another module, - snd-hda-codec-cirrus. - This module is automatically loaded at probing. - -config SND_HDA_CODEC_CONEXANT - bool "Build Conexant HD-audio codec support" - default y - select SND_HDA_GENERIC - help - Say Y here to include Conexant HD-audio codec support in - snd-hda-intel driver, such as CX20549. - - When the HD-audio driver is built as a module, the codec - support code is also built as another module, - snd-hda-codec-conexant. - This module is automatically loaded at probing. - -config SND_HDA_CODEC_CA0110 - bool "Build Creative CA0110-IBG codec support" - default y - select SND_HDA_GENERIC - help - Say Y here to include Creative CA0110-IBG codec support in - snd-hda-intel driver, found on some Creative X-Fi cards. - - When the HD-audio driver is built as a module, the codec - support code is also built as another module, - snd-hda-codec-ca0110. - This module is automatically loaded at probing. - -config SND_HDA_CODEC_CA0132 - bool "Build Creative CA0132 codec support" - default y - help - Say Y here to include Creative CA0132 codec support in - snd-hda-intel driver. - - When the HD-audio driver is built as a module, the codec - support code is also built as another module, - snd-hda-codec-ca0132. - This module is automatically loaded at probing. - -config SND_HDA_CODEC_CA0132_DSP - bool "Support new DSP code for CA0132 codec" - depends on SND_HDA_CODEC_CA0132 && FW_LOADER - select SND_HDA_DSP_LOADER - help - Say Y here to enable the DSP for Creative CA0132 for extended - features like equalizer or echo cancellation. - - Note that this option requires the external firmware file - (ctefx.bin). - -config SND_HDA_CODEC_CMEDIA - bool "Build C-Media HD-audio codec support" - default y - select SND_HDA_GENERIC - help - Say Y here to include C-Media HD-audio codec support in - snd-hda-intel driver, such as CMI9880. - - When the HD-audio driver is built as a module, the codec - support code is also built as another module, - snd-hda-codec-cmedia. - This module is automatically loaded at probing. - -config SND_HDA_CODEC_SI3054 - bool "Build Silicon Labs 3054 HD-modem codec support" - default y - help - Say Y here to include Silicon Labs 3054 HD-modem codec - (and compatibles) support in snd-hda-intel driver. - - When the HD-audio driver is built as a module, the codec - support code is also built as another module, - snd-hda-codec-si3054. - This module is automatically loaded at probing. - -config SND_HDA_GENERIC - bool "Enable generic HD-audio codec parser" - default y - help - Say Y here to enable the generic HD-audio codec parser - in snd-hda-intel driver. - -config SND_HDA_POWER_SAVE_DEFAULT - int "Default time-out for HD-audio power-save mode" - depends on PM - default 0 - help - The default time-out value in seconds for HD-audio automatic - power-save mode. 0 means to disable the power-save mode. - -endif |