summaryrefslogtreecommitdiff
path: root/sound/soc/codecs/wm8960.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/soc/codecs/wm8960.c')
-rw-r--r--sound/soc/codecs/wm8960.c425
1 files changed, 264 insertions, 161 deletions
diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c
index 9ed455700954..384e8e703446 100644
--- a/sound/soc/codecs/wm8960.c
+++ b/sound/soc/codecs/wm8960.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* wm8960.c -- WM8960 ALSA SoC Audio driver
*
* Copyright 2007-11 Wolfson Microelectronics, plc
*
* Author: Liam Girdwood
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/module.h>
@@ -17,6 +14,7 @@
#include <linux/pm.h>
#include <linux/clk.h>
#include <linux/i2c.h>
+#include <linux/acpi.h>
#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
@@ -48,8 +46,10 @@
#define WM8960_DISOP 0x40
#define WM8960_DRES_MASK 0x30
+#define WM8960_DSCH_TOUT 600 /* discharge timeout, ms */
+
static bool is_pll_freq_available(unsigned int source, unsigned int target);
-static int wm8960_set_pll(struct snd_soc_codec *codec,
+static int wm8960_set_pll(struct snd_soc_component *component,
unsigned int freq_in, unsigned int freq_out);
/*
* wm8960 register cache
@@ -120,10 +120,19 @@ static bool wm8960_volatile(struct device *dev, unsigned int reg)
}
}
+#define WM8960_NUM_SUPPLIES 5
+static const char *wm8960_supply_names[WM8960_NUM_SUPPLIES] = {
+ "DCVDD",
+ "DBVDD",
+ "AVDD",
+ "SPKVDD1",
+ "SPKVDD2",
+};
+
struct wm8960_priv {
struct clk *mclk;
struct regmap *regmap;
- int (*set_bias_level)(struct snd_soc_codec *,
+ int (*set_bias_level)(struct snd_soc_component *,
enum snd_soc_bias_level level);
struct snd_soc_dapm_widget *lout1;
struct snd_soc_dapm_widget *rout1;
@@ -136,6 +145,8 @@ struct wm8960_priv {
int freq_in;
bool is_stream_in_use[2];
struct wm8960_data pdata;
+ ktime_t dsch_start;
+ struct regulator_bulk_data supplies[WM8960_NUM_SUPPLIES];
};
#define wm8960_reset(c) regmap_write(c, WM8960_RESET, 0)
@@ -154,6 +165,7 @@ static const char *wm8960_adc_data_output_sel[] = {
"Left Data = Right ADC; Right Data = Left ADC",
};
static const char *wm8960_dmonomix[] = {"Stereo", "Mono"};
+static const char *wm8960_dacslope[] = {"Normal", "Sloping"};
static const struct soc_enum wm8960_enum[] = {
SOC_ENUM_SINGLE(WM8960_DACCTL1, 5, 4, wm8960_polarity),
@@ -164,13 +176,14 @@ static const struct soc_enum wm8960_enum[] = {
SOC_ENUM_SINGLE(WM8960_ALC3, 8, 2, wm8960_alcmode),
SOC_ENUM_SINGLE(WM8960_ADDCTL1, 2, 4, wm8960_adc_data_output_sel),
SOC_ENUM_SINGLE(WM8960_ADDCTL1, 4, 2, wm8960_dmonomix),
+ SOC_ENUM_SINGLE(WM8960_DACCTL2, 1, 2, wm8960_dacslope),
};
static const int deemph_settings[] = { 0, 32000, 44100, 48000 };
-static int wm8960_set_deemph(struct snd_soc_codec *codec)
+static int wm8960_set_deemph(struct snd_soc_component *component)
{
- struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
+ struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
int val, i, best;
/* If we're using deemphasis select the nearest available sample
@@ -189,17 +202,17 @@ static int wm8960_set_deemph(struct snd_soc_codec *codec)
val = 0;
}
- dev_dbg(codec->dev, "Set deemphasis %d\n", val);
+ dev_dbg(component->dev, "Set deemphasis %d\n", val);
- return snd_soc_update_bits(codec, WM8960_DACCTL1,
+ return snd_soc_component_update_bits(component, WM8960_DACCTL1,
0x6, val);
}
static int wm8960_get_deemph(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
- struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
- struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
+ struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+ struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
ucontrol->value.integer.value[0] = wm8960->deemph;
return 0;
@@ -208,8 +221,8 @@ static int wm8960_get_deemph(struct snd_kcontrol *kcontrol,
static int wm8960_put_deemph(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
- struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
- struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
+ struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+ struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
unsigned int deemph = ucontrol->value.integer.value[0];
if (deemph > 1)
@@ -217,7 +230,7 @@ static int wm8960_put_deemph(struct snd_kcontrol *kcontrol,
wm8960->deemph = deemph;
- return wm8960_set_deemph(codec);
+ return wm8960_set_deemph(component);
}
static const DECLARE_TLV_DB_SCALE(adc_tlv, -9750, 50, 1);
@@ -306,6 +319,7 @@ SOC_SINGLE_TLV("Right Output Mixer RINPUT3 Volume",
SOC_ENUM("ADC Data Output Select", wm8960_enum[6]),
SOC_ENUM("DAC Mono Mix", wm8960_enum[7]),
+SOC_ENUM("DAC Filter Characteristics", wm8960_enum[8]),
};
static const struct snd_kcontrol_new wm8960_lin_boost[] = {
@@ -470,11 +484,11 @@ static const struct snd_soc_dapm_route audio_paths_capless[] = {
{ "OUT3 VMID", NULL, "Right Output Mixer" },
};
-static int wm8960_add_widgets(struct snd_soc_codec *codec)
+static int wm8960_add_widgets(struct snd_soc_component *component)
{
- struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
+ struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
struct wm8960_data *pdata = &wm8960->pdata;
- struct snd_soc_dapm_context *dapm = snd_soc_codec_get_dapm(codec);
+ struct snd_soc_dapm_context *dapm = snd_soc_component_to_dapm(component);
struct snd_soc_dapm_widget *w;
snd_soc_dapm_new_controls(dapm, wm8960_dapm_widgets,
@@ -504,7 +518,7 @@ static int wm8960_add_widgets(struct snd_soc_codec *codec)
* list each time to find the desired power state do so now
* and save the result.
*/
- list_for_each_entry(w, &codec->component.card->widgets, list) {
+ list_for_each_entry(w, &component->card->widgets, list) {
if (w->dapm != dapm)
continue;
if (strcmp(w->name, "LOUT1 PGA") == 0)
@@ -521,15 +535,15 @@ static int wm8960_add_widgets(struct snd_soc_codec *codec)
static int wm8960_set_dai_fmt(struct snd_soc_dai *codec_dai,
unsigned int fmt)
{
- struct snd_soc_codec *codec = codec_dai->codec;
+ struct snd_soc_component *component = codec_dai->component;
u16 iface = 0;
/* set master/slave audio interface */
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
- case SND_SOC_DAIFMT_CBM_CFM:
+ case SND_SOC_DAIFMT_CBP_CFP:
iface |= 0x0040;
break;
- case SND_SOC_DAIFMT_CBS_CFS:
+ case SND_SOC_DAIFMT_CBC_CFC:
break;
default:
return -EINVAL;
@@ -573,7 +587,7 @@ static int wm8960_set_dai_fmt(struct snd_soc_dai *codec_dai,
}
/* set iface */
- snd_soc_write(codec, WM8960_IFACE1, iface);
+ snd_soc_component_write(component, WM8960_IFACE1, iface);
return 0;
}
@@ -611,11 +625,7 @@ static const int bclk_divs[] = {
* - lrclk = sysclk / dac_divs
* - 10 * bclk = sysclk / bclk_divs
*
- * If we cannot find an exact match for (sysclk, lrclk, bclk)
- * triplet, we relax the bclk such that bclk is chosen as the
- * closest available frequency greater than expected bclk.
- *
- * @wm8960_priv: wm8960 codec private data
+ * @wm8960: codec private data
* @mclk: MCLK used to derive sysclk
* @sysclk_idx: sysclk_divs index for found sysclk
* @dac_idx: dac_divs index for found lrclk
@@ -632,7 +642,7 @@ int wm8960_configure_sysclk(struct wm8960_priv *wm8960, int mclk,
{
int sysclk, bclk, lrclk;
int i, j, k;
- int diff, closest = mclk;
+ int diff;
/* marker for no match */
*bclk_idx = -1;
@@ -656,12 +666,6 @@ int wm8960_configure_sysclk(struct wm8960_priv *wm8960, int mclk,
*bclk_idx = k;
break;
}
- if (diff > 0 && closest > diff) {
- *sysclk_idx = i;
- *dac_idx = j;
- *bclk_idx = k;
- closest = diff;
- }
}
if (k != ARRAY_SIZE(bclk_divs))
break;
@@ -683,7 +687,7 @@ int wm8960_configure_sysclk(struct wm8960_priv *wm8960, int mclk,
* triplet, we relax the bclk such that bclk is chosen as the
* closest available frequency greater than expected bclk.
*
- * @codec: codec structure
+ * @component: component structure
* @freq_in: input frequency used to derive freq out via PLL
* @sysclk_idx: sysclk_divs index for found sysclk
* @dac_idx: dac_divs index for found lrclk
@@ -695,10 +699,10 @@ int wm8960_configure_sysclk(struct wm8960_priv *wm8960, int mclk,
* (@sysclk_idx, @dac_idx, @bclk_idx) dividers
*/
static
-int wm8960_configure_pll(struct snd_soc_codec *codec, int freq_in,
+int wm8960_configure_pll(struct snd_soc_component *component, int freq_in,
int *sysclk_idx, int *dac_idx, int *bclk_idx)
{
- struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
+ struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
int sysclk, bclk, lrclk, freq_out;
int diff, closest, best_freq_out;
int i, j, k;
@@ -710,7 +714,13 @@ int wm8960_configure_pll(struct snd_soc_codec *codec, int freq_in,
best_freq_out = -EINVAL;
*sysclk_idx = *dac_idx = *bclk_idx = -1;
- for (i = 0; i < ARRAY_SIZE(sysclk_divs); ++i) {
+ /*
+ * From Datasheet, the PLL performs best when f2 is between
+ * 90MHz and 100MHz, the desired sysclk output is 11.2896MHz
+ * or 12.288MHz, then sysclkdiv = 2 is the best choice.
+ * So search sysclk_divs from 2 to 1 other than from 1 to 2.
+ */
+ for (i = ARRAY_SIZE(sysclk_divs) - 1; i >= 0; --i) {
if (sysclk_divs[i] == -1)
continue;
for (j = 0; j < ARRAY_SIZE(dac_divs); ++j) {
@@ -741,22 +751,29 @@ int wm8960_configure_pll(struct snd_soc_codec *codec, int freq_in,
return best_freq_out;
}
-static int wm8960_configure_clocking(struct snd_soc_codec *codec)
+static int wm8960_configure_clocking(struct snd_soc_component *component)
{
- struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
+ struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
int freq_out, freq_in;
- u16 iface1 = snd_soc_read(codec, WM8960_IFACE1);
+ u16 iface1 = snd_soc_component_read(component, WM8960_IFACE1);
int i, j, k;
int ret;
- if (!(iface1 & (1<<6))) {
- dev_dbg(codec->dev,
- "Codec is slave mode, no need to configure clock\n");
+ /*
+ * For Slave mode clocking should still be configured,
+ * so this if statement should be removed, but some platform
+ * may not work if the sysclk is not configured, to avoid such
+ * compatible issue, just add '!wm8960->sysclk' condition in
+ * this if statement.
+ */
+ if (!(iface1 & (1 << 6)) && !wm8960->sysclk) {
+ dev_warn(component->dev,
+ "slave mode, but proceeding with no clock configuration\n");
return 0;
}
if (wm8960->clk_id != WM8960_SYSCLK_MCLK && !wm8960->freq_in) {
- dev_err(codec->dev, "No MCLK configured\n");
+ dev_err(component->dev, "No MCLK configured\n");
return -EINVAL;
}
@@ -769,12 +786,12 @@ static int wm8960_configure_clocking(struct snd_soc_codec *codec)
*/
if (wm8960->clk_id == WM8960_SYSCLK_AUTO) {
/* disable the PLL and using MCLK to provide sysclk */
- wm8960_set_pll(codec, 0, 0);
+ wm8960_set_pll(component, 0, 0);
freq_out = freq_in;
} else if (wm8960->sysclk) {
freq_out = wm8960->sysclk;
} else {
- dev_err(codec->dev, "No SYSCLK configured\n");
+ dev_err(component->dev, "No SYSCLK configured\n");
return -EINVAL;
}
@@ -783,28 +800,28 @@ static int wm8960_configure_clocking(struct snd_soc_codec *codec)
if (ret >= 0) {
goto configure_clock;
} else if (wm8960->clk_id != WM8960_SYSCLK_AUTO) {
- dev_err(codec->dev, "failed to configure clock\n");
+ dev_err(component->dev, "failed to configure clock\n");
return -EINVAL;
}
}
- freq_out = wm8960_configure_pll(codec, freq_in, &i, &j, &k);
+ freq_out = wm8960_configure_pll(component, freq_in, &i, &j, &k);
if (freq_out < 0) {
- dev_err(codec->dev, "failed to configure clock via PLL\n");
+ dev_err(component->dev, "failed to configure clock via PLL\n");
return freq_out;
}
- wm8960_set_pll(codec, freq_in, freq_out);
+ wm8960_set_pll(component, freq_in, freq_out);
configure_clock:
/* configure sysclk clock */
- snd_soc_update_bits(codec, WM8960_CLOCK1, 3 << 1, i << 1);
+ snd_soc_component_update_bits(component, WM8960_CLOCK1, 3 << 1, i << 1);
/* configure frame clock */
- snd_soc_update_bits(codec, WM8960_CLOCK1, 0x7 << 3, j << 3);
- snd_soc_update_bits(codec, WM8960_CLOCK1, 0x7 << 6, j << 6);
+ snd_soc_component_update_bits(component, WM8960_CLOCK1, 0x7 << 3, j << 3);
+ snd_soc_component_update_bits(component, WM8960_CLOCK1, 0x7 << 6, j << 6);
/* configure bit clock */
- snd_soc_update_bits(codec, WM8960_CLOCK2, 0xf, k);
+ snd_soc_component_update_bits(component, WM8960_CLOCK2, 0xf, k);
return 0;
}
@@ -813,9 +830,9 @@ static int wm8960_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
- struct snd_soc_codec *codec = dai->codec;
- struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
- u16 iface = snd_soc_read(codec, WM8960_IFACE1) & 0xfff3;
+ struct snd_soc_component *component = dai->component;
+ struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
+ u16 iface = snd_soc_component_read(component, WM8960_IFACE1) & 0xfff3;
bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
int i;
@@ -839,8 +856,9 @@ static int wm8960_hw_params(struct snd_pcm_substream *substream,
iface |= 0x000c;
break;
}
+ fallthrough;
default:
- dev_err(codec->dev, "unsupported width %d\n",
+ dev_err(component->dev, "unsupported width %d\n",
params_width(params));
return -EINVAL;
}
@@ -848,23 +866,22 @@ static int wm8960_hw_params(struct snd_pcm_substream *substream,
wm8960->lrclk = params_rate(params);
/* Update filters for the new rate */
if (tx) {
- wm8960_set_deemph(codec);
+ wm8960_set_deemph(component);
} else {
for (i = 0; i < ARRAY_SIZE(alc_rates); i++)
if (alc_rates[i].rate == params_rate(params))
- snd_soc_update_bits(codec,
+ snd_soc_component_update_bits(component,
WM8960_ADDCTL3, 0x7,
alc_rates[i].val);
}
/* set iface */
- snd_soc_write(codec, WM8960_IFACE1, iface);
+ snd_soc_component_write(component, WM8960_IFACE1, iface);
wm8960->is_stream_in_use[tx] = true;
- if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_ON &&
- !wm8960->is_stream_in_use[!tx])
- return wm8960_configure_clocking(codec);
+ if (!wm8960->is_stream_in_use[!tx])
+ return wm8960_configure_clocking(component);
return 0;
}
@@ -872,8 +889,8 @@ static int wm8960_hw_params(struct snd_pcm_substream *substream,
static int wm8960_hw_free(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
- struct snd_soc_codec *codec = dai->codec;
- struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
+ struct snd_soc_component *component = dai->component;
+ struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
wm8960->is_stream_in_use[tx] = false;
@@ -881,47 +898,49 @@ static int wm8960_hw_free(struct snd_pcm_substream *substream,
return 0;
}
-static int wm8960_mute(struct snd_soc_dai *dai, int mute)
+static int wm8960_mute(struct snd_soc_dai *dai, int mute, int direction)
{
- struct snd_soc_codec *codec = dai->codec;
+ struct snd_soc_component *component = dai->component;
if (mute)
- snd_soc_update_bits(codec, WM8960_DACCTL1, 0x8, 0x8);
+ snd_soc_component_update_bits(component, WM8960_DACCTL1, 0x8, 0x8);
else
- snd_soc_update_bits(codec, WM8960_DACCTL1, 0x8, 0);
+ snd_soc_component_update_bits(component, WM8960_DACCTL1, 0x8, 0);
return 0;
}
-static int wm8960_set_bias_level_out3(struct snd_soc_codec *codec,
+static int wm8960_set_bias_level_out3(struct snd_soc_component *component,
enum snd_soc_bias_level level)
{
- struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
- u16 pm2 = snd_soc_read(codec, WM8960_POWER2);
+ struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
+ struct snd_soc_dapm_context *dapm = snd_soc_component_to_dapm(component);
+ u16 pm2 = snd_soc_component_read(component, WM8960_POWER2);
int ret;
+ ktime_t tout;
switch (level) {
case SND_SOC_BIAS_ON:
break;
case SND_SOC_BIAS_PREPARE:
- switch (snd_soc_codec_get_bias_level(codec)) {
+ switch (snd_soc_dapm_get_bias_level(dapm)) {
case SND_SOC_BIAS_STANDBY:
if (!IS_ERR(wm8960->mclk)) {
ret = clk_prepare_enable(wm8960->mclk);
if (ret) {
- dev_err(codec->dev,
+ dev_err(component->dev,
"Failed to enable MCLK: %d\n",
ret);
return ret;
}
}
- ret = wm8960_configure_clocking(codec);
+ ret = wm8960_configure_clocking(component);
if (ret)
return ret;
/* Set VMID to 2x50k */
- snd_soc_update_bits(codec, WM8960_POWER1, 0x180, 0x80);
+ snd_soc_component_update_bits(component, WM8960_POWER1, 0x180, 0x80);
break;
case SND_SOC_BIAS_ON:
@@ -930,7 +949,7 @@ static int wm8960_set_bias_level_out3(struct snd_soc_codec *codec,
* disable the pll
*/
if (wm8960->clk_id == WM8960_SYSCLK_AUTO && (pm2 & 0x1))
- wm8960_set_pll(codec, 0, 0);
+ wm8960_set_pll(component, 0, 0);
if (!IS_ERR(wm8960->mclk))
clk_disable_unprepare(wm8960->mclk);
@@ -943,50 +962,56 @@ static int wm8960_set_bias_level_out3(struct snd_soc_codec *codec,
break;
case SND_SOC_BIAS_STANDBY:
- if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_OFF) {
+ if (snd_soc_dapm_get_bias_level(dapm) == SND_SOC_BIAS_OFF) {
+ /* ensure discharge is complete */
+ tout = WM8960_DSCH_TOUT - ktime_ms_delta(ktime_get(), wm8960->dsch_start);
+ if (tout > 0)
+ msleep(tout);
+
regcache_sync(wm8960->regmap);
/* Enable anti-pop features */
- snd_soc_write(codec, WM8960_APOP1,
+ snd_soc_component_write(component, WM8960_APOP1,
WM8960_POBCTRL | WM8960_SOFT_ST |
WM8960_BUFDCOPEN | WM8960_BUFIOEN);
/* Enable & ramp VMID at 2x50k */
- snd_soc_update_bits(codec, WM8960_POWER1, 0x80, 0x80);
+ snd_soc_component_update_bits(component, WM8960_POWER1, 0x80, 0x80);
msleep(100);
/* Enable VREF */
- snd_soc_update_bits(codec, WM8960_POWER1, WM8960_VREF,
+ snd_soc_component_update_bits(component, WM8960_POWER1, WM8960_VREF,
WM8960_VREF);
/* Disable anti-pop features */
- snd_soc_write(codec, WM8960_APOP1, WM8960_BUFIOEN);
+ snd_soc_component_write(component, WM8960_APOP1, WM8960_BUFIOEN);
}
/* Set VMID to 2x250k */
- snd_soc_update_bits(codec, WM8960_POWER1, 0x180, 0x100);
+ snd_soc_component_update_bits(component, WM8960_POWER1, 0x180, 0x100);
break;
case SND_SOC_BIAS_OFF:
/* Enable anti-pop features */
- snd_soc_write(codec, WM8960_APOP1,
+ snd_soc_component_write(component, WM8960_APOP1,
WM8960_POBCTRL | WM8960_SOFT_ST |
WM8960_BUFDCOPEN | WM8960_BUFIOEN);
- /* Disable VMID and VREF, let them discharge */
- snd_soc_write(codec, WM8960_POWER1, 0);
- msleep(600);
+ /* Disable VMID and VREF, mark discharge */
+ snd_soc_component_write(component, WM8960_POWER1, 0);
+ wm8960->dsch_start = ktime_get();
break;
}
return 0;
}
-static int wm8960_set_bias_level_capless(struct snd_soc_codec *codec,
+static int wm8960_set_bias_level_capless(struct snd_soc_component *component,
enum snd_soc_bias_level level)
{
- struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
- u16 pm2 = snd_soc_read(codec, WM8960_POWER2);
+ struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
+ struct snd_soc_dapm_context *dapm = snd_soc_component_to_dapm(component);
+ u16 pm2 = snd_soc_component_read(component, WM8960_POWER2);
int reg, ret;
switch (level) {
@@ -994,10 +1019,10 @@ static int wm8960_set_bias_level_capless(struct snd_soc_codec *codec,
break;
case SND_SOC_BIAS_PREPARE:
- switch (snd_soc_codec_get_bias_level(codec)) {
+ switch (snd_soc_dapm_get_bias_level(dapm)) {
case SND_SOC_BIAS_STANDBY:
/* Enable anti pop mode */
- snd_soc_update_bits(codec, WM8960_APOP1,
+ snd_soc_component_update_bits(component, WM8960_APOP1,
WM8960_POBCTRL | WM8960_SOFT_ST |
WM8960_BUFDCOPEN,
WM8960_POBCTRL | WM8960_SOFT_ST |
@@ -1011,20 +1036,20 @@ static int wm8960_set_bias_level_capless(struct snd_soc_codec *codec,
reg |= WM8960_PWR2_ROUT1;
if (wm8960->out3 && wm8960->out3->power)
reg |= WM8960_PWR2_OUT3;
- snd_soc_update_bits(codec, WM8960_POWER2,
+ snd_soc_component_update_bits(component, WM8960_POWER2,
WM8960_PWR2_LOUT1 |
WM8960_PWR2_ROUT1 |
WM8960_PWR2_OUT3, reg);
/* Enable VMID at 2*50k */
- snd_soc_update_bits(codec, WM8960_POWER1,
+ snd_soc_component_update_bits(component, WM8960_POWER1,
WM8960_VMID_MASK, 0x80);
/* Ramp */
msleep(100);
/* Enable VREF */
- snd_soc_update_bits(codec, WM8960_POWER1,
+ snd_soc_component_update_bits(component, WM8960_POWER1,
WM8960_VREF, WM8960_VREF);
msleep(100);
@@ -1032,14 +1057,14 @@ static int wm8960_set_bias_level_capless(struct snd_soc_codec *codec,
if (!IS_ERR(wm8960->mclk)) {
ret = clk_prepare_enable(wm8960->mclk);
if (ret) {
- dev_err(codec->dev,
+ dev_err(component->dev,
"Failed to enable MCLK: %d\n",
ret);
return ret;
}
}
- ret = wm8960_configure_clocking(codec);
+ ret = wm8960_configure_clocking(component);
if (ret)
return ret;
@@ -1051,20 +1076,20 @@ static int wm8960_set_bias_level_capless(struct snd_soc_codec *codec,
* disable the pll
*/
if (wm8960->clk_id == WM8960_SYSCLK_AUTO && (pm2 & 0x1))
- wm8960_set_pll(codec, 0, 0);
+ wm8960_set_pll(component, 0, 0);
if (!IS_ERR(wm8960->mclk))
clk_disable_unprepare(wm8960->mclk);
/* Enable anti-pop mode */
- snd_soc_update_bits(codec, WM8960_APOP1,
+ snd_soc_component_update_bits(component, WM8960_APOP1,
WM8960_POBCTRL | WM8960_SOFT_ST |
WM8960_BUFDCOPEN,
WM8960_POBCTRL | WM8960_SOFT_ST |
WM8960_BUFDCOPEN);
/* Disable VMID and VREF */
- snd_soc_update_bits(codec, WM8960_POWER1,
+ snd_soc_component_update_bits(component, WM8960_POWER1,
WM8960_VREF | WM8960_VMID_MASK, 0);
break;
@@ -1077,15 +1102,15 @@ static int wm8960_set_bias_level_capless(struct snd_soc_codec *codec,
break;
case SND_SOC_BIAS_STANDBY:
- switch (snd_soc_codec_get_bias_level(codec)) {
+ switch (snd_soc_dapm_get_bias_level(dapm)) {
case SND_SOC_BIAS_PREPARE:
/* Disable HP discharge */
- snd_soc_update_bits(codec, WM8960_APOP2,
+ snd_soc_component_update_bits(component, WM8960_APOP2,
WM8960_DISOP | WM8960_DRES_MASK,
0);
/* Disable anti-pop features */
- snd_soc_update_bits(codec, WM8960_APOP1,
+ snd_soc_component_update_bits(component, WM8960_APOP1,
WM8960_POBCTRL | WM8960_SOFT_ST |
WM8960_BUFDCOPEN,
WM8960_POBCTRL | WM8960_SOFT_ST |
@@ -1184,7 +1209,7 @@ static int pll_factors(unsigned int source, unsigned int target,
return 0;
}
-static int wm8960_set_pll(struct snd_soc_codec *codec,
+static int wm8960_set_pll(struct snd_soc_component *component,
unsigned int freq_in, unsigned int freq_out)
{
u16 reg;
@@ -1199,29 +1224,29 @@ static int wm8960_set_pll(struct snd_soc_codec *codec,
/* Disable the PLL: even if we are changing the frequency the
* PLL needs to be disabled while we do so. */
- snd_soc_update_bits(codec, WM8960_CLOCK1, 0x1, 0);
- snd_soc_update_bits(codec, WM8960_POWER2, 0x1, 0);
+ snd_soc_component_update_bits(component, WM8960_CLOCK1, 0x1, 0);
+ snd_soc_component_update_bits(component, WM8960_POWER2, 0x1, 0);
if (!freq_in || !freq_out)
return 0;
- reg = snd_soc_read(codec, WM8960_PLL1) & ~0x3f;
+ reg = snd_soc_component_read(component, WM8960_PLL1) & ~0x3f;
reg |= pll_div.pre_div << 4;
reg |= pll_div.n;
if (pll_div.k) {
reg |= 0x20;
- snd_soc_write(codec, WM8960_PLL2, (pll_div.k >> 16) & 0xff);
- snd_soc_write(codec, WM8960_PLL3, (pll_div.k >> 8) & 0xff);
- snd_soc_write(codec, WM8960_PLL4, pll_div.k & 0xff);
+ snd_soc_component_write(component, WM8960_PLL2, (pll_div.k >> 16) & 0xff);
+ snd_soc_component_write(component, WM8960_PLL3, (pll_div.k >> 8) & 0xff);
+ snd_soc_component_write(component, WM8960_PLL4, pll_div.k & 0xff);
}
- snd_soc_write(codec, WM8960_PLL1, reg);
+ snd_soc_component_write(component, WM8960_PLL1, reg);
/* Turn it on */
- snd_soc_update_bits(codec, WM8960_POWER2, 0x1, 0x1);
+ snd_soc_component_update_bits(component, WM8960_POWER2, 0x1, 0x1);
msleep(250);
- snd_soc_update_bits(codec, WM8960_CLOCK1, 0x1, 0x1);
+ snd_soc_component_update_bits(component, WM8960_CLOCK1, 0x1, 0x1);
return 0;
}
@@ -1229,43 +1254,43 @@ static int wm8960_set_pll(struct snd_soc_codec *codec,
static int wm8960_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id,
int source, unsigned int freq_in, unsigned int freq_out)
{
- struct snd_soc_codec *codec = codec_dai->codec;
- struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
+ struct snd_soc_component *component = codec_dai->component;
+ struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
wm8960->freq_in = freq_in;
if (pll_id == WM8960_SYSCLK_AUTO)
return 0;
- return wm8960_set_pll(codec, freq_in, freq_out);
+ return wm8960_set_pll(component, freq_in, freq_out);
}
static int wm8960_set_dai_clkdiv(struct snd_soc_dai *codec_dai,
int div_id, int div)
{
- struct snd_soc_codec *codec = codec_dai->codec;
+ struct snd_soc_component *component = codec_dai->component;
u16 reg;
switch (div_id) {
case WM8960_SYSCLKDIV:
- reg = snd_soc_read(codec, WM8960_CLOCK1) & 0x1f9;
- snd_soc_write(codec, WM8960_CLOCK1, reg | div);
+ reg = snd_soc_component_read(component, WM8960_CLOCK1) & 0x1f9;
+ snd_soc_component_write(component, WM8960_CLOCK1, reg | div);
break;
case WM8960_DACDIV:
- reg = snd_soc_read(codec, WM8960_CLOCK1) & 0x1c7;
- snd_soc_write(codec, WM8960_CLOCK1, reg | div);
+ reg = snd_soc_component_read(component, WM8960_CLOCK1) & 0x1c7;
+ snd_soc_component_write(component, WM8960_CLOCK1, reg | div);
break;
case WM8960_OPCLKDIV:
- reg = snd_soc_read(codec, WM8960_PLL1) & 0x03f;
- snd_soc_write(codec, WM8960_PLL1, reg | div);
+ reg = snd_soc_component_read(component, WM8960_PLL1) & 0x03f;
+ snd_soc_component_write(component, WM8960_PLL1, reg | div);
break;
case WM8960_DCLKDIV:
- reg = snd_soc_read(codec, WM8960_CLOCK2) & 0x03f;
- snd_soc_write(codec, WM8960_CLOCK2, reg | div);
+ reg = snd_soc_component_read(component, WM8960_CLOCK2) & 0x03f;
+ snd_soc_component_write(component, WM8960_CLOCK2, reg | div);
break;
case WM8960_TOCLKSEL:
- reg = snd_soc_read(codec, WM8960_ADDCTL1) & 0x1fd;
- snd_soc_write(codec, WM8960_ADDCTL1, reg | div);
+ reg = snd_soc_component_read(component, WM8960_ADDCTL1) & 0x1fd;
+ snd_soc_component_write(component, WM8960_ADDCTL1, reg | div);
break;
default:
return -EINVAL;
@@ -1274,27 +1299,27 @@ static int wm8960_set_dai_clkdiv(struct snd_soc_dai *codec_dai,
return 0;
}
-static int wm8960_set_bias_level(struct snd_soc_codec *codec,
+static int wm8960_set_bias_level(struct snd_soc_component *component,
enum snd_soc_bias_level level)
{
- struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
+ struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
- return wm8960->set_bias_level(codec, level);
+ return wm8960->set_bias_level(component, level);
}
static int wm8960_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id,
unsigned int freq, int dir)
{
- struct snd_soc_codec *codec = dai->codec;
- struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
+ struct snd_soc_component *component = dai->component;
+ struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
switch (clk_id) {
case WM8960_SYSCLK_MCLK:
- snd_soc_update_bits(codec, WM8960_CLOCK1,
+ snd_soc_component_update_bits(component, WM8960_CLOCK1,
0x1, WM8960_SYSCLK_MCLK);
break;
case WM8960_SYSCLK_PLL:
- snd_soc_update_bits(codec, WM8960_CLOCK1,
+ snd_soc_component_update_bits(component, WM8960_CLOCK1,
0x1, WM8960_SYSCLK_PLL);
break;
case WM8960_SYSCLK_AUTO:
@@ -1318,11 +1343,12 @@ static int wm8960_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id,
static const struct snd_soc_dai_ops wm8960_dai_ops = {
.hw_params = wm8960_hw_params,
.hw_free = wm8960_hw_free,
- .digital_mute = wm8960_mute,
+ .mute_stream = wm8960_mute,
.set_fmt = wm8960_set_dai_fmt,
.set_clkdiv = wm8960_set_dai_clkdiv,
.set_pll = wm8960_set_dai_pll,
.set_sysclk = wm8960_set_dai_sysclk,
+ .no_capture_mute = 1,
};
static struct snd_soc_dai_driver wm8960_dai = {
@@ -1340,12 +1366,12 @@ static struct snd_soc_dai_driver wm8960_dai = {
.rates = WM8960_RATES,
.formats = WM8960_FORMATS,},
.ops = &wm8960_dai_ops,
- .symmetric_rates = 1,
+ .symmetric_rate = 1,
};
-static int wm8960_probe(struct snd_soc_codec *codec)
+static int wm8960_probe(struct snd_soc_component *component)
{
- struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
+ struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
struct wm8960_data *pdata = &wm8960->pdata;
if (pdata->capless)
@@ -1353,17 +1379,20 @@ static int wm8960_probe(struct snd_soc_codec *codec)
else
wm8960->set_bias_level = wm8960_set_bias_level_out3;
- snd_soc_add_codec_controls(codec, wm8960_snd_controls,
+ snd_soc_add_component_controls(component, wm8960_snd_controls,
ARRAY_SIZE(wm8960_snd_controls));
- wm8960_add_widgets(codec);
+ wm8960_add_widgets(component);
return 0;
}
-static const struct snd_soc_codec_driver soc_codec_dev_wm8960 = {
- .probe = wm8960_probe,
- .set_bias_level = wm8960_set_bias_level,
- .suspend_bias_off = true,
+static const struct snd_soc_component_driver soc_component_dev_wm8960 = {
+ .probe = wm8960_probe,
+ .set_bias_level = wm8960_set_bias_level,
+ .suspend_bias_off = 1,
+ .idle_bias_on = 1,
+ .use_pmdown_time = 1,
+ .endianness = 1,
};
static const struct regmap_config wm8960_regmap = {
@@ -1373,7 +1402,7 @@ static const struct regmap_config wm8960_regmap = {
.reg_defaults = wm8960_reg_defaults,
.num_reg_defaults = ARRAY_SIZE(wm8960_reg_defaults),
- .cache_type = REGCACHE_RBTREE,
+ .cache_type = REGCACHE_MAPLE,
.volatile_reg = wm8960_volatile,
};
@@ -1388,14 +1417,21 @@ static void wm8960_set_pdata_from_of(struct i2c_client *i2c,
if (of_property_read_bool(np, "wlf,shared-lrclk"))
pdata->shared_lrclk = true;
+
+ of_property_read_u32_array(np, "wlf,gpio-cfg", pdata->gpio_cfg,
+ ARRAY_SIZE(pdata->gpio_cfg));
+
+ of_property_read_u32_array(np, "wlf,hp-cfg", pdata->hp_cfg,
+ ARRAY_SIZE(pdata->hp_cfg));
}
-static int wm8960_i2c_probe(struct i2c_client *i2c,
- const struct i2c_device_id *id)
+static int wm8960_i2c_probe(struct i2c_client *i2c)
{
struct wm8960_data *pdata = dev_get_platdata(&i2c->dev);
struct wm8960_priv *wm8960;
+ unsigned int i;
int ret;
+ u8 val;
wm8960 = devm_kzalloc(&i2c->dev, sizeof(struct wm8960_priv),
GFP_KERNEL);
@@ -1406,21 +1442,55 @@ static int wm8960_i2c_probe(struct i2c_client *i2c,
if (IS_ERR(wm8960->mclk)) {
if (PTR_ERR(wm8960->mclk) == -EPROBE_DEFER)
return -EPROBE_DEFER;
+ } else {
+ ret = clk_get_rate(wm8960->mclk);
+ if (ret >= 0) {
+ wm8960->freq_in = ret;
+ } else {
+ dev_err(&i2c->dev, "Failed to read MCLK rate: %d\n",
+ ret);
+ }
+ }
+
+ for (i = 0; i < ARRAY_SIZE(wm8960->supplies); i++)
+ wm8960->supplies[i].supply = wm8960_supply_names[i];
+
+ ret = devm_regulator_bulk_get(&i2c->dev, ARRAY_SIZE(wm8960->supplies),
+ wm8960->supplies);
+ if (ret < 0) {
+ dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret);
+ return ret;
+ }
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(wm8960->supplies),
+ wm8960->supplies);
+ if (ret < 0) {
+ dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret);
+ return ret;
}
wm8960->regmap = devm_regmap_init_i2c(i2c, &wm8960_regmap);
- if (IS_ERR(wm8960->regmap))
- return PTR_ERR(wm8960->regmap);
+ if (IS_ERR(wm8960->regmap)) {
+ ret = PTR_ERR(wm8960->regmap);
+ goto bulk_disable;
+ }
if (pdata)
memcpy(&wm8960->pdata, pdata, sizeof(struct wm8960_data));
else if (i2c->dev.of_node)
wm8960_set_pdata_from_of(i2c, &wm8960->pdata);
+ ret = i2c_master_recv(i2c, &val, sizeof(val));
+ if (ret >= 0) {
+ dev_err(&i2c->dev, "Not wm8960, wm8960 reg can not read by i2c\n");
+ ret = -EINVAL;
+ goto bulk_disable;
+ }
+
ret = wm8960_reset(wm8960->regmap);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to issue reset\n");
- return ret;
+ goto bulk_disable;
}
if (wm8960->pdata.shared_lrclk) {
@@ -1429,7 +1499,7 @@ static int wm8960_i2c_probe(struct i2c_client *i2c,
if (ret != 0) {
dev_err(&i2c->dev, "Failed to enable LRCM: %d\n",
ret);
- return ret;
+ goto bulk_disable;
}
}
@@ -1445,36 +1515,69 @@ static int wm8960_i2c_probe(struct i2c_client *i2c,
regmap_update_bits(wm8960->regmap, WM8960_LOUT2, 0x100, 0x100);
regmap_update_bits(wm8960->regmap, WM8960_ROUT2, 0x100, 0x100);
+ /* ADCLRC pin configured as GPIO. */
+ regmap_update_bits(wm8960->regmap, WM8960_IFACE2, 1 << 6,
+ wm8960->pdata.gpio_cfg[0] << 6);
+ regmap_update_bits(wm8960->regmap, WM8960_ADDCTL4, 0xF << 4,
+ wm8960->pdata.gpio_cfg[1] << 4);
+
+ /* Enable headphone jack detect */
+ regmap_update_bits(wm8960->regmap, WM8960_ADDCTL4, 3 << 2,
+ wm8960->pdata.hp_cfg[0] << 2);
+ regmap_update_bits(wm8960->regmap, WM8960_ADDCTL2, 3 << 5,
+ wm8960->pdata.hp_cfg[1] << 5);
+ regmap_update_bits(wm8960->regmap, WM8960_ADDCTL1, 3,
+ wm8960->pdata.hp_cfg[2]);
+
i2c_set_clientdata(i2c, wm8960);
- ret = snd_soc_register_codec(&i2c->dev,
- &soc_codec_dev_wm8960, &wm8960_dai, 1);
+ ret = devm_snd_soc_register_component(&i2c->dev,
+ &soc_component_dev_wm8960, &wm8960_dai, 1);
+ if (ret)
+ goto bulk_disable;
+
+ return 0;
+bulk_disable:
+ regulator_bulk_disable(ARRAY_SIZE(wm8960->supplies), wm8960->supplies);
return ret;
}
-static int wm8960_i2c_remove(struct i2c_client *client)
+static void wm8960_i2c_remove(struct i2c_client *client)
{
- snd_soc_unregister_codec(&client->dev);
- return 0;
+ struct wm8960_priv *wm8960 = i2c_get_clientdata(client);
+
+ regulator_bulk_disable(ARRAY_SIZE(wm8960->supplies), wm8960->supplies);
}
static const struct i2c_device_id wm8960_i2c_id[] = {
- { "wm8960", 0 },
+ { "wm8960" },
{ }
};
MODULE_DEVICE_TABLE(i2c, wm8960_i2c_id);
+#if defined(CONFIG_OF)
static const struct of_device_id wm8960_of_match[] = {
{ .compatible = "wlf,wm8960", },
{ }
};
MODULE_DEVICE_TABLE(of, wm8960_of_match);
+#endif
+
+#if defined(CONFIG_ACPI)
+static const struct acpi_device_id wm8960_acpi_match[] = {
+ { "1AEC8960", 0 }, /* Wolfson PCI ID + part ID */
+ { "10138960", 0 }, /* Cirrus Logic PCI ID + part ID */
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, wm8960_acpi_match);
+#endif
static struct i2c_driver wm8960_i2c_driver = {
.driver = {
.name = "wm8960",
- .of_match_table = wm8960_of_match,
+ .of_match_table = of_match_ptr(wm8960_of_match),
+ .acpi_match_table = ACPI_PTR(wm8960_acpi_match),
},
.probe = wm8960_i2c_probe,
.remove = wm8960_i2c_remove,
generated by cgit (git 2.34.1) at 2025-12-26 08:13:56 +0000