diff options
Diffstat (limited to 'tools/include/uapi/linux')
48 files changed, 22198 insertions, 0 deletions
diff --git a/tools/include/uapi/linux/bits.h b/tools/include/uapi/linux/bits.h new file mode 100644 index 000000000000..a04afef9efca --- /dev/null +++ b/tools/include/uapi/linux/bits.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* bits.h: Macros for dealing with bitmasks. */ + +#ifndef _UAPI_LINUX_BITS_H +#define _UAPI_LINUX_BITS_H + +#define __GENMASK(h, l) (((~_UL(0)) << (l)) & (~_UL(0) >> (__BITS_PER_LONG - 1 - (h)))) + +#define __GENMASK_ULL(h, l) (((~_ULL(0)) << (l)) & (~_ULL(0) >> (__BITS_PER_LONG_LONG - 1 - (h)))) + +#define __GENMASK_U128(h, l) \ + ((_BIT128((h)) << 1) - (_BIT128(l))) + +#endif /* _UAPI_LINUX_BITS_H */ diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h new file mode 100644 index 000000000000..be7d8e060e10 --- /dev/null +++ b/tools/include/uapi/linux/bpf.h @@ -0,0 +1,7674 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* Copyright (c) 2011-2014 PLUMgrid, http://plumgrid.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of version 2 of the GNU General Public + * License as published by the Free Software Foundation. + */ +#ifndef _UAPI__LINUX_BPF_H__ +#define _UAPI__LINUX_BPF_H__ + +#include <linux/types.h> +#include <linux/bpf_common.h> + +/* Extended instruction set based on top of classic BPF */ + +/* instruction classes */ +#define BPF_JMP32 0x06 /* jmp mode in word width */ +#define BPF_ALU64 0x07 /* alu mode in double word width */ + +/* ld/ldx fields */ +#define BPF_DW 0x18 /* double word (64-bit) */ +#define BPF_MEMSX 0x80 /* load with sign extension */ +#define BPF_ATOMIC 0xc0 /* atomic memory ops - op type in immediate */ +#define BPF_XADD 0xc0 /* exclusive add - legacy name */ + +/* alu/jmp fields */ +#define BPF_MOV 0xb0 /* mov reg to reg */ +#define BPF_ARSH 0xc0 /* sign extending arithmetic shift right */ + +/* change endianness of a register */ +#define BPF_END 0xd0 /* flags for endianness conversion: */ +#define BPF_TO_LE 0x00 /* convert to little-endian */ +#define BPF_TO_BE 0x08 /* convert to big-endian */ +#define BPF_FROM_LE BPF_TO_LE +#define BPF_FROM_BE BPF_TO_BE + +/* jmp encodings */ +#define BPF_JNE 0x50 /* jump != */ +#define BPF_JLT 0xa0 /* LT is unsigned, '<' */ +#define BPF_JLE 0xb0 /* LE is unsigned, '<=' */ +#define BPF_JSGT 0x60 /* SGT is signed '>', GT in x86 */ +#define BPF_JSGE 0x70 /* SGE is signed '>=', GE in x86 */ +#define BPF_JSLT 0xc0 /* SLT is signed, '<' */ +#define BPF_JSLE 0xd0 /* SLE is signed, '<=' */ +#define BPF_JCOND 0xe0 /* conditional pseudo jumps: may_goto, goto_or_nop */ +#define BPF_CALL 0x80 /* function call */ +#define BPF_EXIT 0x90 /* function return */ + +/* atomic op type fields (stored in immediate) */ +#define BPF_FETCH 0x01 /* not an opcode on its own, used to build others */ +#define BPF_XCHG (0xe0 | BPF_FETCH) /* atomic exchange */ +#define BPF_CMPXCHG (0xf0 | BPF_FETCH) /* atomic compare-and-write */ + +#define BPF_LOAD_ACQ 0x100 /* load-acquire */ +#define BPF_STORE_REL 0x110 /* store-release */ + +enum bpf_cond_pseudo_jmp { + BPF_MAY_GOTO = 0, +}; + +/* Register numbers */ +enum { + BPF_REG_0 = 0, + BPF_REG_1, + BPF_REG_2, + BPF_REG_3, + BPF_REG_4, + BPF_REG_5, + BPF_REG_6, + BPF_REG_7, + BPF_REG_8, + BPF_REG_9, + BPF_REG_10, + __MAX_BPF_REG, +}; + +/* BPF has 10 general purpose 64-bit registers and stack frame. */ +#define MAX_BPF_REG __MAX_BPF_REG + +struct bpf_insn { + __u8 code; /* opcode */ + __u8 dst_reg:4; /* dest register */ + __u8 src_reg:4; /* source register */ + __s16 off; /* signed offset */ + __s32 imm; /* signed immediate constant */ +}; + +/* Deprecated: use struct bpf_lpm_trie_key_u8 (when the "data" member is needed for + * byte access) or struct bpf_lpm_trie_key_hdr (when using an alternative type for + * the trailing flexible array member) instead. + */ +struct bpf_lpm_trie_key { + __u32 prefixlen; /* up to 32 for AF_INET, 128 for AF_INET6 */ + __u8 data[0]; /* Arbitrary size */ +}; + +/* Header for bpf_lpm_trie_key structs */ +struct bpf_lpm_trie_key_hdr { + __u32 prefixlen; +}; + +/* Key of an a BPF_MAP_TYPE_LPM_TRIE entry, with trailing byte array. */ +struct bpf_lpm_trie_key_u8 { + union { + struct bpf_lpm_trie_key_hdr hdr; + __u32 prefixlen; + }; + __u8 data[]; /* Arbitrary size */ +}; + +struct bpf_cgroup_storage_key { + __u64 cgroup_inode_id; /* cgroup inode id */ + __u32 attach_type; /* program attach type (enum bpf_attach_type) */ +}; + +enum bpf_cgroup_iter_order { + BPF_CGROUP_ITER_ORDER_UNSPEC = 0, + BPF_CGROUP_ITER_SELF_ONLY, /* process only a single object. */ + BPF_CGROUP_ITER_DESCENDANTS_PRE, /* walk descendants in pre-order. */ + BPF_CGROUP_ITER_DESCENDANTS_POST, /* walk descendants in post-order. */ + BPF_CGROUP_ITER_ANCESTORS_UP, /* walk ancestors upward. */ +}; + +union bpf_iter_link_info { + struct { + __u32 map_fd; + } map; + struct { + enum bpf_cgroup_iter_order order; + + /* At most one of cgroup_fd and cgroup_id can be non-zero. If + * both are zero, the walk starts from the default cgroup v2 + * root. For walking v1 hierarchy, one should always explicitly + * specify cgroup_fd. + */ + __u32 cgroup_fd; + __u64 cgroup_id; + } cgroup; + /* Parameters of task iterators. */ + struct { + __u32 tid; + __u32 pid; + __u32 pid_fd; + } task; +}; + +/* BPF syscall commands, see bpf(2) man-page for more details. */ +/** + * DOC: eBPF Syscall Preamble + * + * The operation to be performed by the **bpf**\ () system call is determined + * by the *cmd* argument. Each operation takes an accompanying argument, + * provided via *attr*, which is a pointer to a union of type *bpf_attr* (see + * below). The size argument is the size of the union pointed to by *attr*. + */ +/** + * DOC: eBPF Syscall Commands + * + * BPF_MAP_CREATE + * Description + * Create a map and return a file descriptor that refers to the + * map. The close-on-exec file descriptor flag (see **fcntl**\ (2)) + * is automatically enabled for the new file descriptor. + * + * Applying **close**\ (2) to the file descriptor returned by + * **BPF_MAP_CREATE** will delete the map (but see NOTES). + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_MAP_LOOKUP_ELEM + * Description + * Look up an element with a given *key* in the map referred to + * by the file descriptor *map_fd*. + * + * The *flags* argument may be specified as one of the + * following: + * + * **BPF_F_LOCK** + * Look up the value of a spin-locked map without + * returning the lock. This must be specified if the + * elements contain a spinlock. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_MAP_UPDATE_ELEM + * Description + * Create or update an element (key/value pair) in a specified map. + * + * The *flags* argument should be specified as one of the + * following: + * + * **BPF_ANY** + * Create a new element or update an existing element. + * **BPF_NOEXIST** + * Create a new element only if it did not exist. + * **BPF_EXIST** + * Update an existing element. + * **BPF_F_LOCK** + * Update a spin_lock-ed map element. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * May set *errno* to **EINVAL**, **EPERM**, **ENOMEM**, + * **E2BIG**, **EEXIST**, or **ENOENT**. + * + * **E2BIG** + * The number of elements in the map reached the + * *max_entries* limit specified at map creation time. + * **EEXIST** + * If *flags* specifies **BPF_NOEXIST** and the element + * with *key* already exists in the map. + * **ENOENT** + * If *flags* specifies **BPF_EXIST** and the element with + * *key* does not exist in the map. + * + * BPF_MAP_DELETE_ELEM + * Description + * Look up and delete an element by key in a specified map. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_MAP_GET_NEXT_KEY + * Description + * Look up an element by key in a specified map and return the key + * of the next element. Can be used to iterate over all elements + * in the map. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * The following cases can be used to iterate over all elements of + * the map: + * + * * If *key* is not found, the operation returns zero and sets + * the *next_key* pointer to the key of the first element. + * * If *key* is found, the operation returns zero and sets the + * *next_key* pointer to the key of the next element. + * * If *key* is the last element, returns -1 and *errno* is set + * to **ENOENT**. + * + * May set *errno* to **ENOMEM**, **EFAULT**, **EPERM**, or + * **EINVAL** on error. + * + * BPF_PROG_LOAD + * Description + * Verify and load an eBPF program, returning a new file + * descriptor associated with the program. + * + * Applying **close**\ (2) to the file descriptor returned by + * **BPF_PROG_LOAD** will unload the eBPF program (but see NOTES). + * + * The close-on-exec file descriptor flag (see **fcntl**\ (2)) is + * automatically enabled for the new file descriptor. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_OBJ_PIN + * Description + * Pin an eBPF program or map referred by the specified *bpf_fd* + * to the provided *pathname* on the filesystem. + * + * The *pathname* argument must not contain a dot ("."). + * + * On success, *pathname* retains a reference to the eBPF object, + * preventing deallocation of the object when the original + * *bpf_fd* is closed. This allow the eBPF object to live beyond + * **close**\ (\ *bpf_fd*\ ), and hence the lifetime of the parent + * process. + * + * Applying **unlink**\ (2) or similar calls to the *pathname* + * unpins the object from the filesystem, removing the reference. + * If no other file descriptors or filesystem nodes refer to the + * same object, it will be deallocated (see NOTES). + * + * The filesystem type for the parent directory of *pathname* must + * be **BPF_FS_MAGIC**. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_OBJ_GET + * Description + * Open a file descriptor for the eBPF object pinned to the + * specified *pathname*. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_PROG_ATTACH + * Description + * Attach an eBPF program to a *target_fd* at the specified + * *attach_type* hook. + * + * The *attach_type* specifies the eBPF attachment point to + * attach the program to, and must be one of *bpf_attach_type* + * (see below). + * + * The *attach_bpf_fd* must be a valid file descriptor for a + * loaded eBPF program of a cgroup, flow dissector, LIRC, sockmap + * or sock_ops type corresponding to the specified *attach_type*. + * + * The *target_fd* must be a valid file descriptor for a kernel + * object which depends on the attach type of *attach_bpf_fd*: + * + * **BPF_PROG_TYPE_CGROUP_DEVICE**, + * **BPF_PROG_TYPE_CGROUP_SKB**, + * **BPF_PROG_TYPE_CGROUP_SOCK**, + * **BPF_PROG_TYPE_CGROUP_SOCK_ADDR**, + * **BPF_PROG_TYPE_CGROUP_SOCKOPT**, + * **BPF_PROG_TYPE_CGROUP_SYSCTL**, + * **BPF_PROG_TYPE_SOCK_OPS** + * + * Control Group v2 hierarchy with the eBPF controller + * enabled. Requires the kernel to be compiled with + * **CONFIG_CGROUP_BPF**. + * + * **BPF_PROG_TYPE_FLOW_DISSECTOR** + * + * Network namespace (eg /proc/self/ns/net). + * + * **BPF_PROG_TYPE_LIRC_MODE2** + * + * LIRC device path (eg /dev/lircN). Requires the kernel + * to be compiled with **CONFIG_BPF_LIRC_MODE2**. + * + * **BPF_PROG_TYPE_SK_SKB**, + * **BPF_PROG_TYPE_SK_MSG** + * + * eBPF map of socket type (eg **BPF_MAP_TYPE_SOCKHASH**). + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_PROG_DETACH + * Description + * Detach the eBPF program associated with the *target_fd* at the + * hook specified by *attach_type*. The program must have been + * previously attached using **BPF_PROG_ATTACH**. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_PROG_TEST_RUN + * Description + * Run the eBPF program associated with the *prog_fd* a *repeat* + * number of times against a provided program context *ctx_in* and + * data *data_in*, and return the modified program context + * *ctx_out*, *data_out* (for example, packet data), result of the + * execution *retval*, and *duration* of the test run. + * + * The sizes of the buffers provided as input and output + * parameters *ctx_in*, *ctx_out*, *data_in*, and *data_out* must + * be provided in the corresponding variables *ctx_size_in*, + * *ctx_size_out*, *data_size_in*, and/or *data_size_out*. If any + * of these parameters are not provided (ie set to NULL), the + * corresponding size field must be zero. + * + * Some program types have particular requirements: + * + * **BPF_PROG_TYPE_SK_LOOKUP** + * *data_in* and *data_out* must be NULL. + * + * **BPF_PROG_TYPE_RAW_TRACEPOINT**, + * **BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE** + * + * *ctx_out*, *data_in* and *data_out* must be NULL. + * *repeat* must be zero. + * + * BPF_PROG_RUN is an alias for BPF_PROG_TEST_RUN. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * **ENOSPC** + * Either *data_size_out* or *ctx_size_out* is too small. + * **ENOTSUPP** + * This command is not supported by the program type of + * the program referred to by *prog_fd*. + * + * BPF_PROG_GET_NEXT_ID + * Description + * Fetch the next eBPF program currently loaded into the kernel. + * + * Looks for the eBPF program with an id greater than *start_id* + * and updates *next_id* on success. If no other eBPF programs + * remain with ids higher than *start_id*, returns -1 and sets + * *errno* to **ENOENT**. + * + * Return + * Returns zero on success. On error, or when no id remains, -1 + * is returned and *errno* is set appropriately. + * + * BPF_MAP_GET_NEXT_ID + * Description + * Fetch the next eBPF map currently loaded into the kernel. + * + * Looks for the eBPF map with an id greater than *start_id* + * and updates *next_id* on success. If no other eBPF maps + * remain with ids higher than *start_id*, returns -1 and sets + * *errno* to **ENOENT**. + * + * Return + * Returns zero on success. On error, or when no id remains, -1 + * is returned and *errno* is set appropriately. + * + * BPF_PROG_GET_FD_BY_ID + * Description + * Open a file descriptor for the eBPF program corresponding to + * *prog_id*. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_MAP_GET_FD_BY_ID + * Description + * Open a file descriptor for the eBPF map corresponding to + * *map_id*. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_OBJ_GET_INFO_BY_FD + * Description + * Obtain information about the eBPF object corresponding to + * *bpf_fd*. + * + * Populates up to *info_len* bytes of *info*, which will be in + * one of the following formats depending on the eBPF object type + * of *bpf_fd*: + * + * * **struct bpf_prog_info** + * * **struct bpf_map_info** + * * **struct bpf_btf_info** + * * **struct bpf_link_info** + * * **struct bpf_token_info** + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_PROG_QUERY + * Description + * Obtain information about eBPF programs associated with the + * specified *attach_type* hook. + * + * The *target_fd* must be a valid file descriptor for a kernel + * object which depends on the attach type of *attach_bpf_fd*: + * + * **BPF_PROG_TYPE_CGROUP_DEVICE**, + * **BPF_PROG_TYPE_CGROUP_SKB**, + * **BPF_PROG_TYPE_CGROUP_SOCK**, + * **BPF_PROG_TYPE_CGROUP_SOCK_ADDR**, + * **BPF_PROG_TYPE_CGROUP_SOCKOPT**, + * **BPF_PROG_TYPE_CGROUP_SYSCTL**, + * **BPF_PROG_TYPE_SOCK_OPS** + * + * Control Group v2 hierarchy with the eBPF controller + * enabled. Requires the kernel to be compiled with + * **CONFIG_CGROUP_BPF**. + * + * **BPF_PROG_TYPE_FLOW_DISSECTOR** + * + * Network namespace (eg /proc/self/ns/net). + * + * **BPF_PROG_TYPE_LIRC_MODE2** + * + * LIRC device path (eg /dev/lircN). Requires the kernel + * to be compiled with **CONFIG_BPF_LIRC_MODE2**. + * + * **BPF_PROG_QUERY** always fetches the number of programs + * attached and the *attach_flags* which were used to attach those + * programs. Additionally, if *prog_ids* is nonzero and the number + * of attached programs is less than *prog_cnt*, populates + * *prog_ids* with the eBPF program ids of the programs attached + * at *target_fd*. + * + * The following flags may alter the result: + * + * **BPF_F_QUERY_EFFECTIVE** + * Only return information regarding programs which are + * currently effective at the specified *target_fd*. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_RAW_TRACEPOINT_OPEN + * Description + * Attach an eBPF program to a tracepoint *name* to access kernel + * internal arguments of the tracepoint in their raw form. + * + * The *prog_fd* must be a valid file descriptor associated with + * a loaded eBPF program of type **BPF_PROG_TYPE_RAW_TRACEPOINT**. + * + * No ABI guarantees are made about the content of tracepoint + * arguments exposed to the corresponding eBPF program. + * + * Applying **close**\ (2) to the file descriptor returned by + * **BPF_RAW_TRACEPOINT_OPEN** will delete the map (but see NOTES). + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_BTF_LOAD + * Description + * Verify and load BPF Type Format (BTF) metadata into the kernel, + * returning a new file descriptor associated with the metadata. + * BTF is described in more detail at + * https://www.kernel.org/doc/html/latest/bpf/btf.html. + * + * The *btf* parameter must point to valid memory providing + * *btf_size* bytes of BTF binary metadata. + * + * The returned file descriptor can be passed to other **bpf**\ () + * subcommands such as **BPF_PROG_LOAD** or **BPF_MAP_CREATE** to + * associate the BTF with those objects. + * + * Similar to **BPF_PROG_LOAD**, **BPF_BTF_LOAD** has optional + * parameters to specify a *btf_log_buf*, *btf_log_size* and + * *btf_log_level* which allow the kernel to return freeform log + * output regarding the BTF verification process. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_BTF_GET_FD_BY_ID + * Description + * Open a file descriptor for the BPF Type Format (BTF) + * corresponding to *btf_id*. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_TASK_FD_QUERY + * Description + * Obtain information about eBPF programs associated with the + * target process identified by *pid* and *fd*. + * + * If the *pid* and *fd* are associated with a tracepoint, kprobe + * or uprobe perf event, then the *prog_id* and *fd_type* will + * be populated with the eBPF program id and file descriptor type + * of type **bpf_task_fd_type**. If associated with a kprobe or + * uprobe, the *probe_offset* and *probe_addr* will also be + * populated. Optionally, if *buf* is provided, then up to + * *buf_len* bytes of *buf* will be populated with the name of + * the tracepoint, kprobe or uprobe. + * + * The resulting *prog_id* may be introspected in deeper detail + * using **BPF_PROG_GET_FD_BY_ID** and **BPF_OBJ_GET_INFO_BY_FD**. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_MAP_LOOKUP_AND_DELETE_ELEM + * Description + * Look up an element with the given *key* in the map referred to + * by the file descriptor *fd*, and if found, delete the element. + * + * For **BPF_MAP_TYPE_QUEUE** and **BPF_MAP_TYPE_STACK** map + * types, the *flags* argument needs to be set to 0, but for other + * map types, it may be specified as: + * + * **BPF_F_LOCK** + * Look up and delete the value of a spin-locked map + * without returning the lock. This must be specified if + * the elements contain a spinlock. + * + * The **BPF_MAP_TYPE_QUEUE** and **BPF_MAP_TYPE_STACK** map types + * implement this command as a "pop" operation, deleting the top + * element rather than one corresponding to *key*. + * The *key* and *key_len* parameters should be zeroed when + * issuing this operation for these map types. + * + * This command is only valid for the following map types: + * * **BPF_MAP_TYPE_QUEUE** + * * **BPF_MAP_TYPE_STACK** + * * **BPF_MAP_TYPE_HASH** + * * **BPF_MAP_TYPE_PERCPU_HASH** + * * **BPF_MAP_TYPE_LRU_HASH** + * * **BPF_MAP_TYPE_LRU_PERCPU_HASH** + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_MAP_FREEZE + * Description + * Freeze the permissions of the specified map. + * + * Write permissions may be frozen by passing zero *flags*. + * Upon success, no future syscall invocations may alter the + * map state of *map_fd*. Write operations from eBPF programs + * are still possible for a frozen map. + * + * Not supported for maps of type **BPF_MAP_TYPE_STRUCT_OPS**. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_BTF_GET_NEXT_ID + * Description + * Fetch the next BPF Type Format (BTF) object currently loaded + * into the kernel. + * + * Looks for the BTF object with an id greater than *start_id* + * and updates *next_id* on success. If no other BTF objects + * remain with ids higher than *start_id*, returns -1 and sets + * *errno* to **ENOENT**. + * + * Return + * Returns zero on success. On error, or when no id remains, -1 + * is returned and *errno* is set appropriately. + * + * BPF_MAP_LOOKUP_BATCH + * Description + * Iterate and fetch multiple elements in a map. + * + * Two opaque values are used to manage batch operations, + * *in_batch* and *out_batch*. Initially, *in_batch* must be set + * to NULL to begin the batched operation. After each subsequent + * **BPF_MAP_LOOKUP_BATCH**, the caller should pass the resultant + * *out_batch* as the *in_batch* for the next operation to + * continue iteration from the current point. Both *in_batch* and + * *out_batch* must point to memory large enough to hold a key, + * except for maps of type **BPF_MAP_TYPE_{HASH, PERCPU_HASH, + * LRU_HASH, LRU_PERCPU_HASH}**, for which batch parameters + * must be at least 4 bytes wide regardless of key size. + * + * The *keys* and *values* are output parameters which must point + * to memory large enough to hold *count* items based on the key + * and value size of the map *map_fd*. The *keys* buffer must be + * of *key_size* * *count*. The *values* buffer must be of + * *value_size* * *count*. + * + * The *elem_flags* argument may be specified as one of the + * following: + * + * **BPF_F_LOCK** + * Look up the value of a spin-locked map without + * returning the lock. This must be specified if the + * elements contain a spinlock. + * + * On success, *count* elements from the map are copied into the + * user buffer, with the keys copied into *keys* and the values + * copied into the corresponding indices in *values*. + * + * If an error is returned and *errno* is not **EFAULT**, *count* + * is set to the number of successfully processed elements. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * May set *errno* to **ENOSPC** to indicate that *keys* or + * *values* is too small to dump an entire bucket during + * iteration of a hash-based map type. + * + * BPF_MAP_LOOKUP_AND_DELETE_BATCH + * Description + * Iterate and delete all elements in a map. + * + * This operation has the same behavior as + * **BPF_MAP_LOOKUP_BATCH** with two exceptions: + * + * * Every element that is successfully returned is also deleted + * from the map. This is at least *count* elements. Note that + * *count* is both an input and an output parameter. + * * Upon returning with *errno* set to **EFAULT**, up to + * *count* elements may be deleted without returning the keys + * and values of the deleted elements. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_MAP_UPDATE_BATCH + * Description + * Update multiple elements in a map by *key*. + * + * The *keys* and *values* are input parameters which must point + * to memory large enough to hold *count* items based on the key + * and value size of the map *map_fd*. The *keys* buffer must be + * of *key_size* * *count*. The *values* buffer must be of + * *value_size* * *count*. + * + * Each element specified in *keys* is sequentially updated to the + * value in the corresponding index in *values*. The *in_batch* + * and *out_batch* parameters are ignored and should be zeroed. + * + * The *elem_flags* argument should be specified as one of the + * following: + * + * **BPF_ANY** + * Create new elements or update a existing elements. + * **BPF_NOEXIST** + * Create new elements only if they do not exist. + * **BPF_EXIST** + * Update existing elements. + * **BPF_F_LOCK** + * Update spin_lock-ed map elements. This must be + * specified if the map value contains a spinlock. + * + * On success, *count* elements from the map are updated. + * + * If an error is returned and *errno* is not **EFAULT**, *count* + * is set to the number of successfully processed elements. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * May set *errno* to **EINVAL**, **EPERM**, **ENOMEM**, or + * **E2BIG**. **E2BIG** indicates that the number of elements in + * the map reached the *max_entries* limit specified at map + * creation time. + * + * May set *errno* to one of the following error codes under + * specific circumstances: + * + * **EEXIST** + * If *flags* specifies **BPF_NOEXIST** and the element + * with *key* already exists in the map. + * **ENOENT** + * If *flags* specifies **BPF_EXIST** and the element with + * *key* does not exist in the map. + * + * BPF_MAP_DELETE_BATCH + * Description + * Delete multiple elements in a map by *key*. + * + * The *keys* parameter is an input parameter which must point + * to memory large enough to hold *count* items based on the key + * size of the map *map_fd*, that is, *key_size* * *count*. + * + * Each element specified in *keys* is sequentially deleted. The + * *in_batch*, *out_batch*, and *values* parameters are ignored + * and should be zeroed. + * + * The *elem_flags* argument may be specified as one of the + * following: + * + * **BPF_F_LOCK** + * Look up the value of a spin-locked map without + * returning the lock. This must be specified if the + * elements contain a spinlock. + * + * On success, *count* elements from the map are updated. + * + * If an error is returned and *errno* is not **EFAULT**, *count* + * is set to the number of successfully processed elements. If + * *errno* is **EFAULT**, up to *count* elements may be been + * deleted. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_LINK_CREATE + * Description + * Attach an eBPF program to a *target_fd* at the specified + * *attach_type* hook and return a file descriptor handle for + * managing the link. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_LINK_UPDATE + * Description + * Update the eBPF program in the specified *link_fd* to + * *new_prog_fd*. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_LINK_GET_FD_BY_ID + * Description + * Open a file descriptor for the eBPF Link corresponding to + * *link_id*. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_LINK_GET_NEXT_ID + * Description + * Fetch the next eBPF link currently loaded into the kernel. + * + * Looks for the eBPF link with an id greater than *start_id* + * and updates *next_id* on success. If no other eBPF links + * remain with ids higher than *start_id*, returns -1 and sets + * *errno* to **ENOENT**. + * + * Return + * Returns zero on success. On error, or when no id remains, -1 + * is returned and *errno* is set appropriately. + * + * BPF_ENABLE_STATS + * Description + * Enable eBPF runtime statistics gathering. + * + * Runtime statistics gathering for the eBPF runtime is disabled + * by default to minimize the corresponding performance overhead. + * This command enables statistics globally. + * + * Multiple programs may independently enable statistics. + * After gathering the desired statistics, eBPF runtime statistics + * may be disabled again by calling **close**\ (2) for the file + * descriptor returned by this function. Statistics will only be + * disabled system-wide when all outstanding file descriptors + * returned by prior calls for this subcommand are closed. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_ITER_CREATE + * Description + * Create an iterator on top of the specified *link_fd* (as + * previously created using **BPF_LINK_CREATE**) and return a + * file descriptor that can be used to trigger the iteration. + * + * If the resulting file descriptor is pinned to the filesystem + * using **BPF_OBJ_PIN**, then subsequent **read**\ (2) syscalls + * for that path will trigger the iterator to read kernel state + * using the eBPF program attached to *link_fd*. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_LINK_DETACH + * Description + * Forcefully detach the specified *link_fd* from its + * corresponding attachment point. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_PROG_BIND_MAP + * Description + * Bind a map to the lifetime of an eBPF program. + * + * The map identified by *map_fd* is bound to the program + * identified by *prog_fd* and only released when *prog_fd* is + * released. This may be used in cases where metadata should be + * associated with a program which otherwise does not contain any + * references to the map (for example, embedded in the eBPF + * program instructions). + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_TOKEN_CREATE + * Description + * Create BPF token with embedded information about what + * BPF-related functionality it allows: + * - a set of allowed bpf() syscall commands; + * - a set of allowed BPF map types to be created with + * BPF_MAP_CREATE command, if BPF_MAP_CREATE itself is allowed; + * - a set of allowed BPF program types and BPF program attach + * types to be loaded with BPF_PROG_LOAD command, if + * BPF_PROG_LOAD itself is allowed. + * + * BPF token is created (derived) from an instance of BPF FS, + * assuming it has necessary delegation mount options specified. + * This BPF token can be passed as an extra parameter to various + * bpf() syscall commands to grant BPF subsystem functionality to + * unprivileged processes. + * + * When created, BPF token is "associated" with the owning + * user namespace of BPF FS instance (super block) that it was + * derived from, and subsequent BPF operations performed with + * BPF token would be performing capabilities checks (i.e., + * CAP_BPF, CAP_PERFMON, CAP_NET_ADMIN, CAP_SYS_ADMIN) within + * that user namespace. Without BPF token, such capabilities + * have to be granted in init user namespace, making bpf() + * syscall incompatible with user namespace, for the most part. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_PROG_STREAM_READ_BY_FD + * Description + * Read data of a program's BPF stream. The program is identified + * by *prog_fd*, and the stream is identified by the *stream_id*. + * The data is copied to a buffer pointed to by *stream_buf*, and + * filled less than or equal to *stream_buf_len* bytes. + * + * Return + * Number of bytes read from the stream on success, or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * NOTES + * eBPF objects (maps and programs) can be shared between processes. + * + * * After **fork**\ (2), the child inherits file descriptors + * referring to the same eBPF objects. + * * File descriptors referring to eBPF objects can be transferred over + * **unix**\ (7) domain sockets. + * * File descriptors referring to eBPF objects can be duplicated in the + * usual way, using **dup**\ (2) and similar calls. + * * File descriptors referring to eBPF objects can be pinned to the + * filesystem using the **BPF_OBJ_PIN** command of **bpf**\ (2). + * + * An eBPF object is deallocated only after all file descriptors referring + * to the object have been closed and no references remain pinned to the + * filesystem or attached (for example, bound to a program or device). + */ +enum bpf_cmd { + BPF_MAP_CREATE, + BPF_MAP_LOOKUP_ELEM, + BPF_MAP_UPDATE_ELEM, + BPF_MAP_DELETE_ELEM, + BPF_MAP_GET_NEXT_KEY, + BPF_PROG_LOAD, + BPF_OBJ_PIN, + BPF_OBJ_GET, + BPF_PROG_ATTACH, + BPF_PROG_DETACH, + BPF_PROG_TEST_RUN, + BPF_PROG_RUN = BPF_PROG_TEST_RUN, + BPF_PROG_GET_NEXT_ID, + BPF_MAP_GET_NEXT_ID, + BPF_PROG_GET_FD_BY_ID, + BPF_MAP_GET_FD_BY_ID, + BPF_OBJ_GET_INFO_BY_FD, + BPF_PROG_QUERY, + BPF_RAW_TRACEPOINT_OPEN, + BPF_BTF_LOAD, + BPF_BTF_GET_FD_BY_ID, + BPF_TASK_FD_QUERY, + BPF_MAP_LOOKUP_AND_DELETE_ELEM, + BPF_MAP_FREEZE, + BPF_BTF_GET_NEXT_ID, + BPF_MAP_LOOKUP_BATCH, + BPF_MAP_LOOKUP_AND_DELETE_BATCH, + BPF_MAP_UPDATE_BATCH, + BPF_MAP_DELETE_BATCH, + BPF_LINK_CREATE, + BPF_LINK_UPDATE, + BPF_LINK_GET_FD_BY_ID, + BPF_LINK_GET_NEXT_ID, + BPF_ENABLE_STATS, + BPF_ITER_CREATE, + BPF_LINK_DETACH, + BPF_PROG_BIND_MAP, + BPF_TOKEN_CREATE, + BPF_PROG_STREAM_READ_BY_FD, + __MAX_BPF_CMD, +}; + +enum bpf_map_type { + BPF_MAP_TYPE_UNSPEC, + BPF_MAP_TYPE_HASH, + BPF_MAP_TYPE_ARRAY, + BPF_MAP_TYPE_PROG_ARRAY, + BPF_MAP_TYPE_PERF_EVENT_ARRAY, + BPF_MAP_TYPE_PERCPU_HASH, + BPF_MAP_TYPE_PERCPU_ARRAY, + BPF_MAP_TYPE_STACK_TRACE, + BPF_MAP_TYPE_CGROUP_ARRAY, + BPF_MAP_TYPE_LRU_HASH, + BPF_MAP_TYPE_LRU_PERCPU_HASH, + BPF_MAP_TYPE_LPM_TRIE, + BPF_MAP_TYPE_ARRAY_OF_MAPS, + BPF_MAP_TYPE_HASH_OF_MAPS, + BPF_MAP_TYPE_DEVMAP, + BPF_MAP_TYPE_SOCKMAP, + BPF_MAP_TYPE_CPUMAP, + BPF_MAP_TYPE_XSKMAP, + BPF_MAP_TYPE_SOCKHASH, + BPF_MAP_TYPE_CGROUP_STORAGE_DEPRECATED, + /* BPF_MAP_TYPE_CGROUP_STORAGE is available to bpf programs attaching + * to a cgroup. The newer BPF_MAP_TYPE_CGRP_STORAGE is available to + * both cgroup-attached and other progs and supports all functionality + * provided by BPF_MAP_TYPE_CGROUP_STORAGE. So mark + * BPF_MAP_TYPE_CGROUP_STORAGE deprecated. + */ + BPF_MAP_TYPE_CGROUP_STORAGE = BPF_MAP_TYPE_CGROUP_STORAGE_DEPRECATED, + BPF_MAP_TYPE_REUSEPORT_SOCKARRAY, + BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE_DEPRECATED, + /* BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE is available to bpf programs + * attaching to a cgroup. The new mechanism (BPF_MAP_TYPE_CGRP_STORAGE + + * local percpu kptr) supports all BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE + * functionality and more. So mark * BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE + * deprecated. + */ + BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE = BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE_DEPRECATED, + BPF_MAP_TYPE_QUEUE, + BPF_MAP_TYPE_STACK, + BPF_MAP_TYPE_SK_STORAGE, + BPF_MAP_TYPE_DEVMAP_HASH, + BPF_MAP_TYPE_STRUCT_OPS, + BPF_MAP_TYPE_RINGBUF, + BPF_MAP_TYPE_INODE_STORAGE, + BPF_MAP_TYPE_TASK_STORAGE, + BPF_MAP_TYPE_BLOOM_FILTER, + BPF_MAP_TYPE_USER_RINGBUF, + BPF_MAP_TYPE_CGRP_STORAGE, + BPF_MAP_TYPE_ARENA, + BPF_MAP_TYPE_INSN_ARRAY, + __MAX_BPF_MAP_TYPE +}; + +/* Note that tracing related programs such as + * BPF_PROG_TYPE_{KPROBE,TRACEPOINT,PERF_EVENT,RAW_TRACEPOINT} + * are not subject to a stable API since kernel internal data + * structures can change from release to release and may + * therefore break existing tracing BPF programs. Tracing BPF + * programs correspond to /a/ specific kernel which is to be + * analyzed, and not /a/ specific kernel /and/ all future ones. + */ +enum bpf_prog_type { + BPF_PROG_TYPE_UNSPEC, + BPF_PROG_TYPE_SOCKET_FILTER, + BPF_PROG_TYPE_KPROBE, + BPF_PROG_TYPE_SCHED_CLS, + BPF_PROG_TYPE_SCHED_ACT, + BPF_PROG_TYPE_TRACEPOINT, + BPF_PROG_TYPE_XDP, + BPF_PROG_TYPE_PERF_EVENT, + BPF_PROG_TYPE_CGROUP_SKB, + BPF_PROG_TYPE_CGROUP_SOCK, + BPF_PROG_TYPE_LWT_IN, + BPF_PROG_TYPE_LWT_OUT, + BPF_PROG_TYPE_LWT_XMIT, + BPF_PROG_TYPE_SOCK_OPS, + BPF_PROG_TYPE_SK_SKB, + BPF_PROG_TYPE_CGROUP_DEVICE, + BPF_PROG_TYPE_SK_MSG, + BPF_PROG_TYPE_RAW_TRACEPOINT, + BPF_PROG_TYPE_CGROUP_SOCK_ADDR, + BPF_PROG_TYPE_LWT_SEG6LOCAL, + BPF_PROG_TYPE_LIRC_MODE2, + BPF_PROG_TYPE_SK_REUSEPORT, + BPF_PROG_TYPE_FLOW_DISSECTOR, + BPF_PROG_TYPE_CGROUP_SYSCTL, + BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE, + BPF_PROG_TYPE_CGROUP_SOCKOPT, + BPF_PROG_TYPE_TRACING, + BPF_PROG_TYPE_STRUCT_OPS, + BPF_PROG_TYPE_EXT, + BPF_PROG_TYPE_LSM, + BPF_PROG_TYPE_SK_LOOKUP, + BPF_PROG_TYPE_SYSCALL, /* a program that can execute syscalls */ + BPF_PROG_TYPE_NETFILTER, + __MAX_BPF_PROG_TYPE +}; + +enum bpf_attach_type { + BPF_CGROUP_INET_INGRESS, + BPF_CGROUP_INET_EGRESS, + BPF_CGROUP_INET_SOCK_CREATE, + BPF_CGROUP_SOCK_OPS, + BPF_SK_SKB_STREAM_PARSER, + BPF_SK_SKB_STREAM_VERDICT, + BPF_CGROUP_DEVICE, + BPF_SK_MSG_VERDICT, + BPF_CGROUP_INET4_BIND, + BPF_CGROUP_INET6_BIND, + BPF_CGROUP_INET4_CONNECT, + BPF_CGROUP_INET6_CONNECT, + BPF_CGROUP_INET4_POST_BIND, + BPF_CGROUP_INET6_POST_BIND, + BPF_CGROUP_UDP4_SENDMSG, + BPF_CGROUP_UDP6_SENDMSG, + BPF_LIRC_MODE2, + BPF_FLOW_DISSECTOR, + BPF_CGROUP_SYSCTL, + BPF_CGROUP_UDP4_RECVMSG, + BPF_CGROUP_UDP6_RECVMSG, + BPF_CGROUP_GETSOCKOPT, + BPF_CGROUP_SETSOCKOPT, + BPF_TRACE_RAW_TP, + BPF_TRACE_FENTRY, + BPF_TRACE_FEXIT, + BPF_MODIFY_RETURN, + BPF_LSM_MAC, + BPF_TRACE_ITER, + BPF_CGROUP_INET4_GETPEERNAME, + BPF_CGROUP_INET6_GETPEERNAME, + BPF_CGROUP_INET4_GETSOCKNAME, + BPF_CGROUP_INET6_GETSOCKNAME, + BPF_XDP_DEVMAP, + BPF_CGROUP_INET_SOCK_RELEASE, + BPF_XDP_CPUMAP, + BPF_SK_LOOKUP, + BPF_XDP, + BPF_SK_SKB_VERDICT, + BPF_SK_REUSEPORT_SELECT, + BPF_SK_REUSEPORT_SELECT_OR_MIGRATE, + BPF_PERF_EVENT, + BPF_TRACE_KPROBE_MULTI, + BPF_LSM_CGROUP, + BPF_STRUCT_OPS, + BPF_NETFILTER, + BPF_TCX_INGRESS, + BPF_TCX_EGRESS, + BPF_TRACE_UPROBE_MULTI, + BPF_CGROUP_UNIX_CONNECT, + BPF_CGROUP_UNIX_SENDMSG, + BPF_CGROUP_UNIX_RECVMSG, + BPF_CGROUP_UNIX_GETPEERNAME, + BPF_CGROUP_UNIX_GETSOCKNAME, + BPF_NETKIT_PRIMARY, + BPF_NETKIT_PEER, + BPF_TRACE_KPROBE_SESSION, + BPF_TRACE_UPROBE_SESSION, + __MAX_BPF_ATTACH_TYPE +}; + +#define MAX_BPF_ATTACH_TYPE __MAX_BPF_ATTACH_TYPE + +/* Add BPF_LINK_TYPE(type, name) in bpf_types.h to keep bpf_link_type_strs[] + * in sync with the definitions below. + */ +enum bpf_link_type { + BPF_LINK_TYPE_UNSPEC = 0, + BPF_LINK_TYPE_RAW_TRACEPOINT = 1, + BPF_LINK_TYPE_TRACING = 2, + BPF_LINK_TYPE_CGROUP = 3, + BPF_LINK_TYPE_ITER = 4, + BPF_LINK_TYPE_NETNS = 5, + BPF_LINK_TYPE_XDP = 6, + BPF_LINK_TYPE_PERF_EVENT = 7, + BPF_LINK_TYPE_KPROBE_MULTI = 8, + BPF_LINK_TYPE_STRUCT_OPS = 9, + BPF_LINK_TYPE_NETFILTER = 10, + BPF_LINK_TYPE_TCX = 11, + BPF_LINK_TYPE_UPROBE_MULTI = 12, + BPF_LINK_TYPE_NETKIT = 13, + BPF_LINK_TYPE_SOCKMAP = 14, + __MAX_BPF_LINK_TYPE, +}; + +#define MAX_BPF_LINK_TYPE __MAX_BPF_LINK_TYPE + +enum bpf_perf_event_type { + BPF_PERF_EVENT_UNSPEC = 0, + BPF_PERF_EVENT_UPROBE = 1, + BPF_PERF_EVENT_URETPROBE = 2, + BPF_PERF_EVENT_KPROBE = 3, + BPF_PERF_EVENT_KRETPROBE = 4, + BPF_PERF_EVENT_TRACEPOINT = 5, + BPF_PERF_EVENT_EVENT = 6, +}; + +/* cgroup-bpf attach flags used in BPF_PROG_ATTACH command + * + * NONE(default): No further bpf programs allowed in the subtree. + * + * BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, + * the program in this cgroup yields to sub-cgroup program. + * + * BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, + * that cgroup program gets run in addition to the program in this cgroup. + * + * Only one program is allowed to be attached to a cgroup with + * NONE or BPF_F_ALLOW_OVERRIDE flag. + * Attaching another program on top of NONE or BPF_F_ALLOW_OVERRIDE will + * release old program and attach the new one. Attach flags has to match. + * + * Multiple programs are allowed to be attached to a cgroup with + * BPF_F_ALLOW_MULTI flag. They are executed in FIFO order + * (those that were attached first, run first) + * The programs of sub-cgroup are executed first, then programs of + * this cgroup and then programs of parent cgroup. + * When children program makes decision (like picking TCP CA or sock bind) + * parent program has a chance to override it. + * + * With BPF_F_ALLOW_MULTI a new program is added to the end of the list of + * programs for a cgroup. Though it's possible to replace an old program at + * any position by also specifying BPF_F_REPLACE flag and position itself in + * replace_bpf_fd attribute. Old program at this position will be released. + * + * A cgroup with MULTI or OVERRIDE flag allows any attach flags in sub-cgroups. + * A cgroup with NONE doesn't allow any programs in sub-cgroups. + * Ex1: + * cgrp1 (MULTI progs A, B) -> + * cgrp2 (OVERRIDE prog C) -> + * cgrp3 (MULTI prog D) -> + * cgrp4 (OVERRIDE prog E) -> + * cgrp5 (NONE prog F) + * the event in cgrp5 triggers execution of F,D,A,B in that order. + * if prog F is detached, the execution is E,D,A,B + * if prog F and D are detached, the execution is E,A,B + * if prog F, E and D are detached, the execution is C,A,B + * + * All eligible programs are executed regardless of return code from + * earlier programs. + */ +#define BPF_F_ALLOW_OVERRIDE (1U << 0) +#define BPF_F_ALLOW_MULTI (1U << 1) +/* Generic attachment flags. */ +#define BPF_F_REPLACE (1U << 2) +#define BPF_F_BEFORE (1U << 3) +#define BPF_F_AFTER (1U << 4) +#define BPF_F_ID (1U << 5) +#define BPF_F_PREORDER (1U << 6) +#define BPF_F_LINK BPF_F_LINK /* 1 << 13 */ + +/* If BPF_F_STRICT_ALIGNMENT is used in BPF_PROG_LOAD command, the + * verifier will perform strict alignment checking as if the kernel + * has been built with CONFIG_EFFICIENT_UNALIGNED_ACCESS not set, + * and NET_IP_ALIGN defined to 2. + */ +#define BPF_F_STRICT_ALIGNMENT (1U << 0) + +/* If BPF_F_ANY_ALIGNMENT is used in BPF_PROG_LOAD command, the + * verifier will allow any alignment whatsoever. On platforms + * with strict alignment requirements for loads ands stores (such + * as sparc and mips) the verifier validates that all loads and + * stores provably follow this requirement. This flag turns that + * checking and enforcement off. + * + * It is mostly used for testing when we want to validate the + * context and memory access aspects of the verifier, but because + * of an unaligned access the alignment check would trigger before + * the one we are interested in. + */ +#define BPF_F_ANY_ALIGNMENT (1U << 1) + +/* BPF_F_TEST_RND_HI32 is used in BPF_PROG_LOAD command for testing purpose. + * Verifier does sub-register def/use analysis and identifies instructions whose + * def only matters for low 32-bit, high 32-bit is never referenced later + * through implicit zero extension. Therefore verifier notifies JIT back-ends + * that it is safe to ignore clearing high 32-bit for these instructions. This + * saves some back-ends a lot of code-gen. However such optimization is not + * necessary on some arches, for example x86_64, arm64 etc, whose JIT back-ends + * hence hasn't used verifier's analysis result. But, we really want to have a + * way to be able to verify the correctness of the described optimization on + * x86_64 on which testsuites are frequently exercised. + * + * So, this flag is introduced. Once it is set, verifier will randomize high + * 32-bit for those instructions who has been identified as safe to ignore them. + * Then, if verifier is not doing correct analysis, such randomization will + * regress tests to expose bugs. + */ +#define BPF_F_TEST_RND_HI32 (1U << 2) + +/* The verifier internal test flag. Behavior is undefined */ +#define BPF_F_TEST_STATE_FREQ (1U << 3) + +/* If BPF_F_SLEEPABLE is used in BPF_PROG_LOAD command, the verifier will + * restrict map and helper usage for such programs. Sleepable BPF programs can + * only be attached to hooks where kernel execution context allows sleeping. + * Such programs are allowed to use helpers that may sleep like + * bpf_copy_from_user(). + */ +#define BPF_F_SLEEPABLE (1U << 4) + +/* If BPF_F_XDP_HAS_FRAGS is used in BPF_PROG_LOAD command, the loaded program + * fully support xdp frags. + */ +#define BPF_F_XDP_HAS_FRAGS (1U << 5) + +/* If BPF_F_XDP_DEV_BOUND_ONLY is used in BPF_PROG_LOAD command, the loaded + * program becomes device-bound but can access XDP metadata. + */ +#define BPF_F_XDP_DEV_BOUND_ONLY (1U << 6) + +/* The verifier internal test flag. Behavior is undefined */ +#define BPF_F_TEST_REG_INVARIANTS (1U << 7) + +/* link_create.kprobe_multi.flags used in LINK_CREATE command for + * BPF_TRACE_KPROBE_MULTI attach type to create return probe. + */ +enum { + BPF_F_KPROBE_MULTI_RETURN = (1U << 0) +}; + +/* link_create.uprobe_multi.flags used in LINK_CREATE command for + * BPF_TRACE_UPROBE_MULTI attach type to create return probe. + */ +enum { + BPF_F_UPROBE_MULTI_RETURN = (1U << 0) +}; + +/* link_create.netfilter.flags used in LINK_CREATE command for + * BPF_PROG_TYPE_NETFILTER to enable IP packet defragmentation. + */ +#define BPF_F_NETFILTER_IP_DEFRAG (1U << 0) + +/* When BPF ldimm64's insn[0].src_reg != 0 then this can have + * the following extensions: + * + * insn[0].src_reg: BPF_PSEUDO_MAP_[FD|IDX] + * insn[0].imm: map fd or fd_idx + * insn[1].imm: 0 + * insn[0].off: 0 + * insn[1].off: 0 + * ldimm64 rewrite: address of map + * verifier type: CONST_PTR_TO_MAP + */ +#define BPF_PSEUDO_MAP_FD 1 +#define BPF_PSEUDO_MAP_IDX 5 + +/* insn[0].src_reg: BPF_PSEUDO_MAP_[IDX_]VALUE + * insn[0].imm: map fd or fd_idx + * insn[1].imm: offset into value + * insn[0].off: 0 + * insn[1].off: 0 + * ldimm64 rewrite: address of map[0]+offset + * verifier type: PTR_TO_MAP_VALUE + */ +#define BPF_PSEUDO_MAP_VALUE 2 +#define BPF_PSEUDO_MAP_IDX_VALUE 6 + +/* insn[0].src_reg: BPF_PSEUDO_BTF_ID + * insn[0].imm: kernel btd id of VAR + * insn[1].imm: 0 + * insn[0].off: 0 + * insn[1].off: 0 + * ldimm64 rewrite: address of the kernel variable + * verifier type: PTR_TO_BTF_ID or PTR_TO_MEM, depending on whether the var + * is struct/union. + */ +#define BPF_PSEUDO_BTF_ID 3 +/* insn[0].src_reg: BPF_PSEUDO_FUNC + * insn[0].imm: insn offset to the func + * insn[1].imm: 0 + * insn[0].off: 0 + * insn[1].off: 0 + * ldimm64 rewrite: address of the function + * verifier type: PTR_TO_FUNC. + */ +#define BPF_PSEUDO_FUNC 4 + +/* when bpf_call->src_reg == BPF_PSEUDO_CALL, bpf_call->imm == pc-relative + * offset to another bpf function + */ +#define BPF_PSEUDO_CALL 1 +/* when bpf_call->src_reg == BPF_PSEUDO_KFUNC_CALL, + * bpf_call->imm == btf_id of a BTF_KIND_FUNC in the running kernel + */ +#define BPF_PSEUDO_KFUNC_CALL 2 + +enum bpf_addr_space_cast { + BPF_ADDR_SPACE_CAST = 1, +}; + +/* flags for BPF_MAP_UPDATE_ELEM command */ +enum { + BPF_ANY = 0, /* create new element or update existing */ + BPF_NOEXIST = 1, /* create new element if it didn't exist */ + BPF_EXIST = 2, /* update existing element */ + BPF_F_LOCK = 4, /* spin_lock-ed map_lookup/map_update */ +}; + +/* flags for BPF_MAP_CREATE command */ +enum { + BPF_F_NO_PREALLOC = (1U << 0), +/* Instead of having one common LRU list in the + * BPF_MAP_TYPE_LRU_[PERCPU_]HASH map, use a percpu LRU list + * which can scale and perform better. + * Note, the LRU nodes (including free nodes) cannot be moved + * across different LRU lists. + */ + BPF_F_NO_COMMON_LRU = (1U << 1), +/* Specify numa node during map creation */ + BPF_F_NUMA_NODE = (1U << 2), + +/* Flags for accessing BPF object from syscall side. */ + BPF_F_RDONLY = (1U << 3), + BPF_F_WRONLY = (1U << 4), + +/* Flag for stack_map, store build_id+offset instead of pointer */ + BPF_F_STACK_BUILD_ID = (1U << 5), + +/* Zero-initialize hash function seed. This should only be used for testing. */ + BPF_F_ZERO_SEED = (1U << 6), + +/* Flags for accessing BPF object from program side. */ + BPF_F_RDONLY_PROG = (1U << 7), + BPF_F_WRONLY_PROG = (1U << 8), + +/* Clone map from listener for newly accepted socket */ + BPF_F_CLONE = (1U << 9), + +/* Enable memory-mapping BPF map */ + BPF_F_MMAPABLE = (1U << 10), + +/* Share perf_event among processes */ + BPF_F_PRESERVE_ELEMS = (1U << 11), + +/* Create a map that is suitable to be an inner map with dynamic max entries */ + BPF_F_INNER_MAP = (1U << 12), + +/* Create a map that will be registered/unregesitered by the backed bpf_link */ + BPF_F_LINK = (1U << 13), + +/* Get path from provided FD in BPF_OBJ_PIN/BPF_OBJ_GET commands */ + BPF_F_PATH_FD = (1U << 14), + +/* Flag for value_type_btf_obj_fd, the fd is available */ + BPF_F_VTYPE_BTF_OBJ_FD = (1U << 15), + +/* BPF token FD is passed in a corresponding command's token_fd field */ + BPF_F_TOKEN_FD = (1U << 16), + +/* When user space page faults in bpf_arena send SIGSEGV instead of inserting new page */ + BPF_F_SEGV_ON_FAULT = (1U << 17), + +/* Do not translate kernel bpf_arena pointers to user pointers */ + BPF_F_NO_USER_CONV = (1U << 18), + +/* Enable BPF ringbuf overwrite mode */ + BPF_F_RB_OVERWRITE = (1U << 19), +}; + +/* Flags for BPF_PROG_QUERY. */ + +/* Query effective (directly attached + inherited from ancestor cgroups) + * programs that will be executed for events within a cgroup. + * attach_flags with this flag are always returned 0. + */ +#define BPF_F_QUERY_EFFECTIVE (1U << 0) + +/* Flags for BPF_PROG_TEST_RUN */ + +/* If set, run the test on the cpu specified by bpf_attr.test.cpu */ +#define BPF_F_TEST_RUN_ON_CPU (1U << 0) +/* If set, XDP frames will be transmitted after processing */ +#define BPF_F_TEST_XDP_LIVE_FRAMES (1U << 1) +/* If set, apply CHECKSUM_COMPLETE to skb and validate the checksum */ +#define BPF_F_TEST_SKB_CHECKSUM_COMPLETE (1U << 2) + +/* type for BPF_ENABLE_STATS */ +enum bpf_stats_type { + /* enabled run_time_ns and run_cnt */ + BPF_STATS_RUN_TIME = 0, +}; + +enum bpf_stack_build_id_status { + /* user space need an empty entry to identify end of a trace */ + BPF_STACK_BUILD_ID_EMPTY = 0, + /* with valid build_id and offset */ + BPF_STACK_BUILD_ID_VALID = 1, + /* couldn't get build_id, fallback to ip */ + BPF_STACK_BUILD_ID_IP = 2, +}; + +#define BPF_BUILD_ID_SIZE 20 +struct bpf_stack_build_id { + __s32 status; + unsigned char build_id[BPF_BUILD_ID_SIZE]; + union { + __u64 offset; + __u64 ip; + }; +}; + +#define BPF_OBJ_NAME_LEN 16U + +enum { + BPF_STREAM_STDOUT = 1, + BPF_STREAM_STDERR = 2, +}; + +union bpf_attr { + struct { /* anonymous struct used by BPF_MAP_CREATE command */ + __u32 map_type; /* one of enum bpf_map_type */ + __u32 key_size; /* size of key in bytes */ + __u32 value_size; /* size of value in bytes */ + __u32 max_entries; /* max number of entries in a map */ + __u32 map_flags; /* BPF_MAP_CREATE related + * flags defined above. + */ + __u32 inner_map_fd; /* fd pointing to the inner map */ + __u32 numa_node; /* numa node (effective only if + * BPF_F_NUMA_NODE is set). + */ + char map_name[BPF_OBJ_NAME_LEN]; + __u32 map_ifindex; /* ifindex of netdev to create on */ + __u32 btf_fd; /* fd pointing to a BTF type data */ + __u32 btf_key_type_id; /* BTF type_id of the key */ + __u32 btf_value_type_id; /* BTF type_id of the value */ + __u32 btf_vmlinux_value_type_id;/* BTF type_id of a kernel- + * struct stored as the + * map value + */ + /* Any per-map-type extra fields + * + * BPF_MAP_TYPE_BLOOM_FILTER - the lowest 4 bits indicate the + * number of hash functions (if 0, the bloom filter will default + * to using 5 hash functions). + * + * BPF_MAP_TYPE_ARENA - contains the address where user space + * is going to mmap() the arena. It has to be page aligned. + */ + __u64 map_extra; + + __s32 value_type_btf_obj_fd; /* fd pointing to a BTF + * type data for + * btf_vmlinux_value_type_id. + */ + /* BPF token FD to use with BPF_MAP_CREATE operation. + * If provided, map_flags should have BPF_F_TOKEN_FD flag set. + */ + __s32 map_token_fd; + + /* Hash of the program that has exclusive access to the map. + */ + __aligned_u64 excl_prog_hash; + /* Size of the passed excl_prog_hash. */ + __u32 excl_prog_hash_size; + }; + + struct { /* anonymous struct used by BPF_MAP_*_ELEM and BPF_MAP_FREEZE commands */ + __u32 map_fd; + __aligned_u64 key; + union { + __aligned_u64 value; + __aligned_u64 next_key; + }; + __u64 flags; + }; + + struct { /* struct used by BPF_MAP_*_BATCH commands */ + __aligned_u64 in_batch; /* start batch, + * NULL to start from beginning + */ + __aligned_u64 out_batch; /* output: next start batch */ + __aligned_u64 keys; + __aligned_u64 values; + __u32 count; /* input/output: + * input: # of key/value + * elements + * output: # of filled elements + */ + __u32 map_fd; + __u64 elem_flags; + __u64 flags; + } batch; + + struct { /* anonymous struct used by BPF_PROG_LOAD command */ + __u32 prog_type; /* one of enum bpf_prog_type */ + __u32 insn_cnt; + __aligned_u64 insns; + __aligned_u64 license; + __u32 log_level; /* verbosity level of verifier */ + __u32 log_size; /* size of user buffer */ + __aligned_u64 log_buf; /* user supplied buffer */ + __u32 kern_version; /* not used */ + __u32 prog_flags; + char prog_name[BPF_OBJ_NAME_LEN]; + __u32 prog_ifindex; /* ifindex of netdev to prep for */ + /* For some prog types expected attach type must be known at + * load time to verify attach type specific parts of prog + * (context accesses, allowed helpers, etc). + */ + __u32 expected_attach_type; + __u32 prog_btf_fd; /* fd pointing to BTF type data */ + __u32 func_info_rec_size; /* userspace bpf_func_info size */ + __aligned_u64 func_info; /* func info */ + __u32 func_info_cnt; /* number of bpf_func_info records */ + __u32 line_info_rec_size; /* userspace bpf_line_info size */ + __aligned_u64 line_info; /* line info */ + __u32 line_info_cnt; /* number of bpf_line_info records */ + __u32 attach_btf_id; /* in-kernel BTF type id to attach to */ + union { + /* valid prog_fd to attach to bpf prog */ + __u32 attach_prog_fd; + /* or valid module BTF object fd or 0 to attach to vmlinux */ + __u32 attach_btf_obj_fd; + }; + __u32 core_relo_cnt; /* number of bpf_core_relo */ + __aligned_u64 fd_array; /* array of FDs */ + __aligned_u64 core_relos; + __u32 core_relo_rec_size; /* sizeof(struct bpf_core_relo) */ + /* output: actual total log contents size (including termintaing zero). + * It could be both larger than original log_size (if log was + * truncated), or smaller (if log buffer wasn't filled completely). + */ + __u32 log_true_size; + /* BPF token FD to use with BPF_PROG_LOAD operation. + * If provided, prog_flags should have BPF_F_TOKEN_FD flag set. + */ + __s32 prog_token_fd; + /* The fd_array_cnt can be used to pass the length of the + * fd_array array. In this case all the [map] file descriptors + * passed in this array will be bound to the program, even if + * the maps are not referenced directly. The functionality is + * similar to the BPF_PROG_BIND_MAP syscall, but maps can be + * used by the verifier during the program load. If provided, + * then the fd_array[0,...,fd_array_cnt-1] is expected to be + * continuous. + */ + __u32 fd_array_cnt; + /* Pointer to a buffer containing the signature of the BPF + * program. + */ + __aligned_u64 signature; + /* Size of the signature buffer in bytes. */ + __u32 signature_size; + /* ID of the kernel keyring to be used for signature + * verification. + */ + __s32 keyring_id; + }; + + struct { /* anonymous struct used by BPF_OBJ_* commands */ + __aligned_u64 pathname; + __u32 bpf_fd; + __u32 file_flags; + /* Same as dirfd in openat() syscall; see openat(2) + * manpage for details of path FD and pathname semantics; + * path_fd should accompanied by BPF_F_PATH_FD flag set in + * file_flags field, otherwise it should be set to zero; + * if BPF_F_PATH_FD flag is not set, AT_FDCWD is assumed. + */ + __s32 path_fd; + }; + + struct { /* anonymous struct used by BPF_PROG_ATTACH/DETACH commands */ + union { + __u32 target_fd; /* target object to attach to or ... */ + __u32 target_ifindex; /* target ifindex */ + }; + __u32 attach_bpf_fd; + __u32 attach_type; + __u32 attach_flags; + __u32 replace_bpf_fd; + union { + __u32 relative_fd; + __u32 relative_id; + }; + __u64 expected_revision; + }; + + struct { /* anonymous struct used by BPF_PROG_TEST_RUN command */ + __u32 prog_fd; + __u32 retval; + __u32 data_size_in; /* input: len of data_in */ + __u32 data_size_out; /* input/output: len of data_out + * returns ENOSPC if data_out + * is too small. + */ + __aligned_u64 data_in; + __aligned_u64 data_out; + __u32 repeat; + __u32 duration; + __u32 ctx_size_in; /* input: len of ctx_in */ + __u32 ctx_size_out; /* input/output: len of ctx_out + * returns ENOSPC if ctx_out + * is too small. + */ + __aligned_u64 ctx_in; + __aligned_u64 ctx_out; + __u32 flags; + __u32 cpu; + __u32 batch_size; + } test; + + struct { /* anonymous struct used by BPF_*_GET_*_ID */ + union { + __u32 start_id; + __u32 prog_id; + __u32 map_id; + __u32 btf_id; + __u32 link_id; + }; + __u32 next_id; + __u32 open_flags; + __s32 fd_by_id_token_fd; + }; + + struct { /* anonymous struct used by BPF_OBJ_GET_INFO_BY_FD */ + __u32 bpf_fd; + __u32 info_len; + __aligned_u64 info; + } info; + + struct { /* anonymous struct used by BPF_PROG_QUERY command */ + union { + __u32 target_fd; /* target object to query or ... */ + __u32 target_ifindex; /* target ifindex */ + }; + __u32 attach_type; + __u32 query_flags; + __u32 attach_flags; + __aligned_u64 prog_ids; + union { + __u32 prog_cnt; + __u32 count; + }; + __u32 :32; + /* output: per-program attach_flags. + * not allowed to be set during effective query. + */ + __aligned_u64 prog_attach_flags; + __aligned_u64 link_ids; + __aligned_u64 link_attach_flags; + __u64 revision; + } query; + + struct { /* anonymous struct used by BPF_RAW_TRACEPOINT_OPEN command */ + __u64 name; + __u32 prog_fd; + __u32 :32; + __aligned_u64 cookie; + } raw_tracepoint; + + struct { /* anonymous struct for BPF_BTF_LOAD */ + __aligned_u64 btf; + __aligned_u64 btf_log_buf; + __u32 btf_size; + __u32 btf_log_size; + __u32 btf_log_level; + /* output: actual total log contents size (including termintaing zero). + * It could be both larger than original log_size (if log was + * truncated), or smaller (if log buffer wasn't filled completely). + */ + __u32 btf_log_true_size; + __u32 btf_flags; + /* BPF token FD to use with BPF_BTF_LOAD operation. + * If provided, btf_flags should have BPF_F_TOKEN_FD flag set. + */ + __s32 btf_token_fd; + }; + + struct { + __u32 pid; /* input: pid */ + __u32 fd; /* input: fd */ + __u32 flags; /* input: flags */ + __u32 buf_len; /* input/output: buf len */ + __aligned_u64 buf; /* input/output: + * tp_name for tracepoint + * symbol for kprobe + * filename for uprobe + */ + __u32 prog_id; /* output: prod_id */ + __u32 fd_type; /* output: BPF_FD_TYPE_* */ + __u64 probe_offset; /* output: probe_offset */ + __u64 probe_addr; /* output: probe_addr */ + } task_fd_query; + + struct { /* struct used by BPF_LINK_CREATE command */ + union { + __u32 prog_fd; /* eBPF program to attach */ + __u32 map_fd; /* struct_ops to attach */ + }; + union { + __u32 target_fd; /* target object to attach to or ... */ + __u32 target_ifindex; /* target ifindex */ + }; + __u32 attach_type; /* attach type */ + __u32 flags; /* extra flags */ + union { + __u32 target_btf_id; /* btf_id of target to attach to */ + struct { + __aligned_u64 iter_info; /* extra bpf_iter_link_info */ + __u32 iter_info_len; /* iter_info length */ + }; + struct { + /* black box user-provided value passed through + * to BPF program at the execution time and + * accessible through bpf_get_attach_cookie() BPF helper + */ + __u64 bpf_cookie; + } perf_event; + struct { + __u32 flags; + __u32 cnt; + __aligned_u64 syms; + __aligned_u64 addrs; + __aligned_u64 cookies; + } kprobe_multi; + struct { + /* this is overlaid with the target_btf_id above. */ + __u32 target_btf_id; + /* black box user-provided value passed through + * to BPF program at the execution time and + * accessible through bpf_get_attach_cookie() BPF helper + */ + __u64 cookie; + } tracing; + struct { + __u32 pf; + __u32 hooknum; + __s32 priority; + __u32 flags; + } netfilter; + struct { + union { + __u32 relative_fd; + __u32 relative_id; + }; + __u64 expected_revision; + } tcx; + struct { + __aligned_u64 path; + __aligned_u64 offsets; + __aligned_u64 ref_ctr_offsets; + __aligned_u64 cookies; + __u32 cnt; + __u32 flags; + __u32 pid; + } uprobe_multi; + struct { + union { + __u32 relative_fd; + __u32 relative_id; + }; + __u64 expected_revision; + } netkit; + struct { + union { + __u32 relative_fd; + __u32 relative_id; + }; + __u64 expected_revision; + } cgroup; + }; + } link_create; + + struct { /* struct used by BPF_LINK_UPDATE command */ + __u32 link_fd; /* link fd */ + union { + /* new program fd to update link with */ + __u32 new_prog_fd; + /* new struct_ops map fd to update link with */ + __u32 new_map_fd; + }; + __u32 flags; /* extra flags */ + union { + /* expected link's program fd; is specified only if + * BPF_F_REPLACE flag is set in flags. + */ + __u32 old_prog_fd; + /* expected link's map fd; is specified only + * if BPF_F_REPLACE flag is set. + */ + __u32 old_map_fd; + }; + } link_update; + + struct { + __u32 link_fd; + } link_detach; + + struct { /* struct used by BPF_ENABLE_STATS command */ + __u32 type; + } enable_stats; + + struct { /* struct used by BPF_ITER_CREATE command */ + __u32 link_fd; + __u32 flags; + } iter_create; + + struct { /* struct used by BPF_PROG_BIND_MAP command */ + __u32 prog_fd; + __u32 map_fd; + __u32 flags; /* extra flags */ + } prog_bind_map; + + struct { /* struct used by BPF_TOKEN_CREATE command */ + __u32 flags; + __u32 bpffs_fd; + } token_create; + + struct { + __aligned_u64 stream_buf; + __u32 stream_buf_len; + __u32 stream_id; + __u32 prog_fd; + } prog_stream_read; + +} __attribute__((aligned(8))); + +/* The description below is an attempt at providing documentation to eBPF + * developers about the multiple available eBPF helper functions. It can be + * parsed and used to produce a manual page. The workflow is the following, + * and requires the rst2man utility: + * + * $ ./scripts/bpf_doc.py \ + * --filename include/uapi/linux/bpf.h > /tmp/bpf-helpers.rst + * $ rst2man /tmp/bpf-helpers.rst > /tmp/bpf-helpers.7 + * $ man /tmp/bpf-helpers.7 + * + * Note that in order to produce this external documentation, some RST + * formatting is used in the descriptions to get "bold" and "italics" in + * manual pages. Also note that the few trailing white spaces are + * intentional, removing them would break paragraphs for rst2man. + * + * Start of BPF helper function descriptions: + * + * void *bpf_map_lookup_elem(struct bpf_map *map, const void *key) + * Description + * Perform a lookup in *map* for an entry associated to *key*. + * Return + * Map value associated to *key*, or **NULL** if no entry was + * found. + * + * long bpf_map_update_elem(struct bpf_map *map, const void *key, const void *value, u64 flags) + * Description + * Add or update the value of the entry associated to *key* in + * *map* with *value*. *flags* is one of: + * + * **BPF_NOEXIST** + * The entry for *key* must not exist in the map. + * **BPF_EXIST** + * The entry for *key* must already exist in the map. + * **BPF_ANY** + * No condition on the existence of the entry for *key*. + * + * Flag value **BPF_NOEXIST** cannot be used for maps of types + * **BPF_MAP_TYPE_ARRAY** or **BPF_MAP_TYPE_PERCPU_ARRAY** (all + * elements always exist), the helper would return an error. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_map_delete_elem(struct bpf_map *map, const void *key) + * Description + * Delete entry with *key* from *map*. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_probe_read(void *dst, u32 size, const void *unsafe_ptr) + * Description + * For tracing programs, safely attempt to read *size* bytes from + * kernel space address *unsafe_ptr* and store the data in *dst*. + * + * Generally, use **bpf_probe_read_user**\ () or + * **bpf_probe_read_kernel**\ () instead. + * Return + * 0 on success, or a negative error in case of failure. + * + * u64 bpf_ktime_get_ns(void) + * Description + * Return the time elapsed since system boot, in nanoseconds. + * Does not include time the system was suspended. + * See: **clock_gettime**\ (**CLOCK_MONOTONIC**) + * Return + * Current *ktime*. + * + * long bpf_trace_printk(const char *fmt, u32 fmt_size, ...) + * Description + * This helper is a "printk()-like" facility for debugging. It + * prints a message defined by format *fmt* (of size *fmt_size*) + * to file *\/sys/kernel/tracing/trace* from TraceFS, if + * available. It can take up to three additional **u64** + * arguments (as an eBPF helpers, the total number of arguments is + * limited to five). + * + * Each time the helper is called, it appends a line to the trace. + * Lines are discarded while *\/sys/kernel/tracing/trace* is + * open, use *\/sys/kernel/tracing/trace_pipe* to avoid this. + * The format of the trace is customizable, and the exact output + * one will get depends on the options set in + * *\/sys/kernel/tracing/trace_options* (see also the + * *README* file under the same directory). However, it usually + * defaults to something like: + * + * :: + * + * telnet-470 [001] .N.. 419421.045894: 0x00000001: <formatted msg> + * + * In the above: + * + * * ``telnet`` is the name of the current task. + * * ``470`` is the PID of the current task. + * * ``001`` is the CPU number on which the task is + * running. + * * In ``.N..``, each character refers to a set of + * options (whether irqs are enabled, scheduling + * options, whether hard/softirqs are running, level of + * preempt_disabled respectively). **N** means that + * **TIF_NEED_RESCHED** and **PREEMPT_NEED_RESCHED** + * are set. + * * ``419421.045894`` is a timestamp. + * * ``0x00000001`` is a fake value used by BPF for the + * instruction pointer register. + * * ``<formatted msg>`` is the message formatted with + * *fmt*. + * + * The conversion specifiers supported by *fmt* are similar, but + * more limited than for printk(). They are **%d**, **%i**, + * **%u**, **%x**, **%ld**, **%li**, **%lu**, **%lx**, **%lld**, + * **%lli**, **%llu**, **%llx**, **%p**, **%s**. No modifier (size + * of field, padding with zeroes, etc.) is available, and the + * helper will return **-EINVAL** (but print nothing) if it + * encounters an unknown specifier. + * + * Also, note that **bpf_trace_printk**\ () is slow, and should + * only be used for debugging purposes. For this reason, a notice + * block (spanning several lines) is printed to kernel logs and + * states that the helper should not be used "for production use" + * the first time this helper is used (or more precisely, when + * **trace_printk**\ () buffers are allocated). For passing values + * to user space, perf events should be preferred. + * Return + * The number of bytes written to the buffer, or a negative error + * in case of failure. + * + * u32 bpf_get_prandom_u32(void) + * Description + * Get a pseudo-random number. + * + * From a security point of view, this helper uses its own + * pseudo-random internal state, and cannot be used to infer the + * seed of other random functions in the kernel. However, it is + * essential to note that the generator used by the helper is not + * cryptographically secure. + * Return + * A random 32-bit unsigned value. + * + * u32 bpf_get_smp_processor_id(void) + * Description + * Get the SMP (symmetric multiprocessing) processor id. Note that + * all programs run with migration disabled, which means that the + * SMP processor id is stable during all the execution of the + * program. + * Return + * The SMP id of the processor running the program. + * Attributes + * __bpf_fastcall + * + * long bpf_skb_store_bytes(struct sk_buff *skb, u32 offset, const void *from, u32 len, u64 flags) + * Description + * Store *len* bytes from address *from* into the packet + * associated to *skb*, at *offset*. The *flags* are a combination + * of the following values: + * + * **BPF_F_RECOMPUTE_CSUM** + * Automatically update *skb*\ **->csum** after storing the + * bytes. + * **BPF_F_INVALIDATE_HASH** + * Set *skb*\ **->hash**, *skb*\ **->swhash** and *skb*\ + * **->l4hash** to 0. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_l3_csum_replace(struct sk_buff *skb, u32 offset, u64 from, u64 to, u64 size) + * Description + * Recompute the layer 3 (e.g. IP) checksum for the packet + * associated to *skb*. Computation is incremental, so the helper + * must know the former value of the header field that was + * modified (*from*), the new value of this field (*to*), and the + * number of bytes (2 or 4) for this field, stored in *size*. + * Alternatively, it is possible to store the difference between + * the previous and the new values of the header field in *to*, by + * setting *from* and *size* to 0. For both methods, *offset* + * indicates the location of the IP checksum within the packet. + * + * This helper works in combination with **bpf_csum_diff**\ (), + * which does not update the checksum in-place, but offers more + * flexibility and can handle sizes larger than 2 or 4 for the + * checksum to update. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_l4_csum_replace(struct sk_buff *skb, u32 offset, u64 from, u64 to, u64 flags) + * Description + * Recompute the layer 4 (e.g. TCP, UDP or ICMP) checksum for the + * packet associated to *skb*. Computation is incremental, so the + * helper must know the former value of the header field that was + * modified (*from*), the new value of this field (*to*), and the + * number of bytes (2 or 4) for this field, stored on the lowest + * four bits of *flags*. Alternatively, it is possible to store + * the difference between the previous and the new values of the + * header field in *to*, by setting *from* and the four lowest + * bits of *flags* to 0. For both methods, *offset* indicates the + * location of the IP checksum within the packet. In addition to + * the size of the field, *flags* can be added (bitwise OR) actual + * flags. With **BPF_F_MARK_MANGLED_0**, a null checksum is left + * untouched (unless **BPF_F_MARK_ENFORCE** is added as well), and + * for updates resulting in a null checksum the value is set to + * **CSUM_MANGLED_0** instead. Flag **BPF_F_PSEUDO_HDR** indicates + * that the modified header field is part of the pseudo-header. + * Flag **BPF_F_IPV6** should be set for IPv6 packets. + * + * This helper works in combination with **bpf_csum_diff**\ (), + * which does not update the checksum in-place, but offers more + * flexibility and can handle sizes larger than 2 or 4 for the + * checksum to update. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_tail_call(void *ctx, struct bpf_map *prog_array_map, u32 index) + * Description + * This special helper is used to trigger a "tail call", or in + * other words, to jump into another eBPF program. The same stack + * frame is used (but values on stack and in registers for the + * caller are not accessible to the callee). This mechanism allows + * for program chaining, either for raising the maximum number of + * available eBPF instructions, or to execute given programs in + * conditional blocks. For security reasons, there is an upper + * limit to the number of successive tail calls that can be + * performed. + * + * Upon call of this helper, the program attempts to jump into a + * program referenced at index *index* in *prog_array_map*, a + * special map of type **BPF_MAP_TYPE_PROG_ARRAY**, and passes + * *ctx*, a pointer to the context. + * + * If the call succeeds, the kernel immediately runs the first + * instruction of the new program. This is not a function call, + * and it never returns to the previous program. If the call + * fails, then the helper has no effect, and the caller continues + * to run its subsequent instructions. A call can fail if the + * destination program for the jump does not exist (i.e. *index* + * is superior to the number of entries in *prog_array_map*), or + * if the maximum number of tail calls has been reached for this + * chain of programs. This limit is defined in the kernel by the + * macro **MAX_TAIL_CALL_CNT** (not accessible to user space), + * which is currently set to 33. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_clone_redirect(struct sk_buff *skb, u32 ifindex, u64 flags) + * Description + * Clone and redirect the packet associated to *skb* to another + * net device of index *ifindex*. Both ingress and egress + * interfaces can be used for redirection. The **BPF_F_INGRESS** + * value in *flags* is used to make the distinction (ingress path + * is selected if the flag is present, egress path otherwise). + * This is the only flag supported for now. + * + * In comparison with **bpf_redirect**\ () helper, + * **bpf_clone_redirect**\ () has the associated cost of + * duplicating the packet buffer, but this can be executed out of + * the eBPF program. Conversely, **bpf_redirect**\ () is more + * efficient, but it is handled through an action code where the + * redirection happens only after the eBPF program has returned. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. Positive + * error indicates a potential drop or congestion in the target + * device. The particular positive error codes are not defined. + * + * u64 bpf_get_current_pid_tgid(void) + * Description + * Get the current pid and tgid. + * Return + * A 64-bit integer containing the current tgid and pid, and + * created as such: + * *current_task*\ **->tgid << 32 \|** + * *current_task*\ **->pid**. + * + * u64 bpf_get_current_uid_gid(void) + * Description + * Get the current uid and gid. + * Return + * A 64-bit integer containing the current GID and UID, and + * created as such: *current_gid* **<< 32 \|** *current_uid*. + * + * long bpf_get_current_comm(void *buf, u32 size_of_buf) + * Description + * Copy the **comm** attribute of the current task into *buf* of + * *size_of_buf*. The **comm** attribute contains the name of + * the executable (excluding the path) for the current task. The + * *size_of_buf* must be strictly positive. On success, the + * helper makes sure that the *buf* is NUL-terminated. On failure, + * it is filled with zeroes. + * Return + * 0 on success, or a negative error in case of failure. + * + * u32 bpf_get_cgroup_classid(struct sk_buff *skb) + * Description + * Retrieve the classid for the current task, i.e. for the net_cls + * cgroup to which *skb* belongs. + * + * This helper can be used on TC egress path, but not on ingress. + * + * The net_cls cgroup provides an interface to tag network packets + * based on a user-provided identifier for all traffic coming from + * the tasks belonging to the related cgroup. See also the related + * kernel documentation, available from the Linux sources in file + * *Documentation/admin-guide/cgroup-v1/net_cls.rst*. + * + * The Linux kernel has two versions for cgroups: there are + * cgroups v1 and cgroups v2. Both are available to users, who can + * use a mixture of them, but note that the net_cls cgroup is for + * cgroup v1 only. This makes it incompatible with BPF programs + * run on cgroups, which is a cgroup-v2-only feature (a socket can + * only hold data for one version of cgroups at a time). + * + * This helper is only available is the kernel was compiled with + * the **CONFIG_CGROUP_NET_CLASSID** configuration option set to + * "**y**" or to "**m**". + * Return + * The classid, or 0 for the default unconfigured classid. + * + * long bpf_skb_vlan_push(struct sk_buff *skb, __be16 vlan_proto, u16 vlan_tci) + * Description + * Push a *vlan_tci* (VLAN tag control information) of protocol + * *vlan_proto* to the packet associated to *skb*, then update + * the checksum. Note that if *vlan_proto* is different from + * **ETH_P_8021Q** and **ETH_P_8021AD**, it is considered to + * be **ETH_P_8021Q**. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_skb_vlan_pop(struct sk_buff *skb) + * Description + * Pop a VLAN header from the packet associated to *skb*. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_skb_get_tunnel_key(struct sk_buff *skb, struct bpf_tunnel_key *key, u32 size, u64 flags) + * Description + * Get tunnel metadata. This helper takes a pointer *key* to an + * empty **struct bpf_tunnel_key** of **size**, that will be + * filled with tunnel metadata for the packet associated to *skb*. + * The *flags* can be set to **BPF_F_TUNINFO_IPV6**, which + * indicates that the tunnel is based on IPv6 protocol instead of + * IPv4. + * + * The **struct bpf_tunnel_key** is an object that generalizes the + * principal parameters used by various tunneling protocols into a + * single struct. This way, it can be used to easily make a + * decision based on the contents of the encapsulation header, + * "summarized" in this struct. In particular, it holds the IP + * address of the remote end (IPv4 or IPv6, depending on the case) + * in *key*\ **->remote_ipv4** or *key*\ **->remote_ipv6**. Also, + * this struct exposes the *key*\ **->tunnel_id**, which is + * generally mapped to a VNI (Virtual Network Identifier), making + * it programmable together with the **bpf_skb_set_tunnel_key**\ + * () helper. + * + * Let's imagine that the following code is part of a program + * attached to the TC ingress interface, on one end of a GRE + * tunnel, and is supposed to filter out all messages coming from + * remote ends with IPv4 address other than 10.0.0.1: + * + * :: + * + * int ret; + * struct bpf_tunnel_key key = {}; + * + * ret = bpf_skb_get_tunnel_key(skb, &key, sizeof(key), 0); + * if (ret < 0) + * return TC_ACT_SHOT; // drop packet + * + * if (key.remote_ipv4 != 0x0a000001) + * return TC_ACT_SHOT; // drop packet + * + * return TC_ACT_OK; // accept packet + * + * This interface can also be used with all encapsulation devices + * that can operate in "collect metadata" mode: instead of having + * one network device per specific configuration, the "collect + * metadata" mode only requires a single device where the + * configuration can be extracted from this helper. + * + * This can be used together with various tunnels such as VXLan, + * Geneve, GRE or IP in IP (IPIP). + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_skb_set_tunnel_key(struct sk_buff *skb, struct bpf_tunnel_key *key, u32 size, u64 flags) + * Description + * Populate tunnel metadata for packet associated to *skb.* The + * tunnel metadata is set to the contents of *key*, of *size*. The + * *flags* can be set to a combination of the following values: + * + * **BPF_F_TUNINFO_IPV6** + * Indicate that the tunnel is based on IPv6 protocol + * instead of IPv4. + * **BPF_F_ZERO_CSUM_TX** + * For IPv4 packets, add a flag to tunnel metadata + * indicating that checksum computation should be skipped + * and checksum set to zeroes. + * **BPF_F_DONT_FRAGMENT** + * Add a flag to tunnel metadata indicating that the + * packet should not be fragmented. + * **BPF_F_SEQ_NUMBER** + * Add a flag to tunnel metadata indicating that a + * sequence number should be added to tunnel header before + * sending the packet. This flag was added for GRE + * encapsulation, but might be used with other protocols + * as well in the future. + * **BPF_F_NO_TUNNEL_KEY** + * Add a flag to tunnel metadata indicating that no tunnel + * key should be set in the resulting tunnel header. + * + * Here is a typical usage on the transmit path: + * + * :: + * + * struct bpf_tunnel_key key; + * populate key ... + * bpf_skb_set_tunnel_key(skb, &key, sizeof(key), 0); + * bpf_clone_redirect(skb, vxlan_dev_ifindex, 0); + * + * See also the description of the **bpf_skb_get_tunnel_key**\ () + * helper for additional information. + * Return + * 0 on success, or a negative error in case of failure. + * + * u64 bpf_perf_event_read(struct bpf_map *map, u64 flags) + * Description + * Read the value of a perf event counter. This helper relies on a + * *map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. The nature of + * the perf event counter is selected when *map* is updated with + * perf event file descriptors. The *map* is an array whose size + * is the number of available CPUs, and each cell contains a value + * relative to one CPU. The value to retrieve is indicated by + * *flags*, that contains the index of the CPU to look up, masked + * with **BPF_F_INDEX_MASK**. Alternatively, *flags* can be set to + * **BPF_F_CURRENT_CPU** to indicate that the value for the + * current CPU should be retrieved. + * + * Note that before Linux 4.13, only hardware perf event can be + * retrieved. + * + * Also, be aware that the newer helper + * **bpf_perf_event_read_value**\ () is recommended over + * **bpf_perf_event_read**\ () in general. The latter has some ABI + * quirks where error and counter value are used as a return code + * (which is wrong to do since ranges may overlap). This issue is + * fixed with **bpf_perf_event_read_value**\ (), which at the same + * time provides more features over the **bpf_perf_event_read**\ + * () interface. Please refer to the description of + * **bpf_perf_event_read_value**\ () for details. + * Return + * The value of the perf event counter read from the map, or a + * negative error code in case of failure. + * + * long bpf_redirect(u32 ifindex, u64 flags) + * Description + * Redirect the packet to another net device of index *ifindex*. + * This helper is somewhat similar to **bpf_clone_redirect**\ + * (), except that the packet is not cloned, which provides + * increased performance. + * + * Except for XDP, both ingress and egress interfaces can be used + * for redirection. The **BPF_F_INGRESS** value in *flags* is used + * to make the distinction (ingress path is selected if the flag + * is present, egress path otherwise). Currently, XDP only + * supports redirection to the egress interface, and accepts no + * flag at all. + * + * The same effect can also be attained with the more generic + * **bpf_redirect_map**\ (), which uses a BPF map to store the + * redirect target instead of providing it directly to the helper. + * Return + * For XDP, the helper returns **XDP_REDIRECT** on success or + * **XDP_ABORTED** on error. For other program types, the values + * are **TC_ACT_REDIRECT** on success or **TC_ACT_SHOT** on + * error. + * + * u32 bpf_get_route_realm(struct sk_buff *skb) + * Description + * Retrieve the realm or the route, that is to say the + * **tclassid** field of the destination for the *skb*. The + * identifier retrieved is a user-provided tag, similar to the + * one used with the net_cls cgroup (see description for + * **bpf_get_cgroup_classid**\ () helper), but here this tag is + * held by a route (a destination entry), not by a task. + * + * Retrieving this identifier works with the clsact TC egress hook + * (see also **tc-bpf(8)**), or alternatively on conventional + * classful egress qdiscs, but not on TC ingress path. In case of + * clsact TC egress hook, this has the advantage that, internally, + * the destination entry has not been dropped yet in the transmit + * path. Therefore, the destination entry does not need to be + * artificially held via **netif_keep_dst**\ () for a classful + * qdisc until the *skb* is freed. + * + * This helper is available only if the kernel was compiled with + * **CONFIG_IP_ROUTE_CLASSID** configuration option. + * Return + * The realm of the route for the packet associated to *skb*, or 0 + * if none was found. + * + * long bpf_perf_event_output(void *ctx, struct bpf_map *map, u64 flags, void *data, u64 size) + * Description + * Write raw *data* blob into a special BPF perf event held by + * *map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. This perf + * event must have the following attributes: **PERF_SAMPLE_RAW** + * as **sample_type**, **PERF_TYPE_SOFTWARE** as **type**, and + * **PERF_COUNT_SW_BPF_OUTPUT** as **config**. + * + * The *flags* are used to indicate the index in *map* for which + * the value must be put, masked with **BPF_F_INDEX_MASK**. + * Alternatively, *flags* can be set to **BPF_F_CURRENT_CPU** + * to indicate that the index of the current CPU core should be + * used. + * + * The value to write, of *size*, is passed through eBPF stack and + * pointed by *data*. + * + * The context of the program *ctx* needs also be passed to the + * helper. + * + * On user space, a program willing to read the values needs to + * call **perf_event_open**\ () on the perf event (either for + * one or for all CPUs) and to store the file descriptor into the + * *map*. This must be done before the eBPF program can send data + * into it. An example is available in file + * *samples/bpf/trace_output_user.c* in the Linux kernel source + * tree (the eBPF program counterpart is in + * *samples/bpf/trace_output.bpf.c*). + * + * **bpf_perf_event_output**\ () achieves better performance + * than **bpf_trace_printk**\ () for sharing data with user + * space, and is much better suitable for streaming data from eBPF + * programs. + * + * Note that this helper is not restricted to tracing use cases + * and can be used with programs attached to TC or XDP as well, + * where it allows for passing data to user space listeners. Data + * can be: + * + * * Only custom structs, + * * Only the packet payload, or + * * A combination of both. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_skb_load_bytes(const void *skb, u32 offset, void *to, u32 len) + * Description + * This helper was provided as an easy way to load data from a + * packet. It can be used to load *len* bytes from *offset* from + * the packet associated to *skb*, into the buffer pointed by + * *to*. + * + * Since Linux 4.7, usage of this helper has mostly been replaced + * by "direct packet access", enabling packet data to be + * manipulated with *skb*\ **->data** and *skb*\ **->data_end** + * pointing respectively to the first byte of packet data and to + * the byte after the last byte of packet data. However, it + * remains useful if one wishes to read large quantities of data + * at once from a packet into the eBPF stack. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_get_stackid(void *ctx, struct bpf_map *map, u64 flags) + * Description + * Walk a user or a kernel stack and return its id. To achieve + * this, the helper needs *ctx*, which is a pointer to the context + * on which the tracing program is executed, and a pointer to a + * *map* of type **BPF_MAP_TYPE_STACK_TRACE**. + * + * The last argument, *flags*, holds the number of stack frames to + * skip (from 0 to 255), masked with + * **BPF_F_SKIP_FIELD_MASK**. The next bits can be used to set + * a combination of the following flags: + * + * **BPF_F_USER_STACK** + * Collect a user space stack instead of a kernel stack. + * **BPF_F_FAST_STACK_CMP** + * Compare stacks by hash only. + * **BPF_F_REUSE_STACKID** + * If two different stacks hash into the same *stackid*, + * discard the old one. + * + * The stack id retrieved is a 32 bit long integer handle which + * can be further combined with other data (including other stack + * ids) and used as a key into maps. This can be useful for + * generating a variety of graphs (such as flame graphs or off-cpu + * graphs). + * + * For walking a stack, this helper is an improvement over + * **bpf_probe_read**\ (), which can be used with unrolled loops + * but is not efficient and consumes a lot of eBPF instructions. + * Instead, **bpf_get_stackid**\ () can collect up to + * **PERF_MAX_STACK_DEPTH** both kernel and user frames. Note that + * this limit can be controlled with the **sysctl** program, and + * that it should be manually increased in order to profile long + * user stacks (such as stacks for Java programs). To do so, use: + * + * :: + * + * # sysctl kernel.perf_event_max_stack=<new value> + * Return + * The positive or null stack id on success, or a negative error + * in case of failure. + * + * s64 bpf_csum_diff(__be32 *from, u32 from_size, __be32 *to, u32 to_size, __wsum seed) + * Description + * Compute a checksum difference, from the raw buffer pointed by + * *from*, of length *from_size* (that must be a multiple of 4), + * towards the raw buffer pointed by *to*, of size *to_size* + * (same remark). An optional *seed* can be added to the value + * (this can be cascaded, the seed may come from a previous call + * to the helper). + * + * This is flexible enough to be used in several ways: + * + * * With *from_size* == 0, *to_size* > 0 and *seed* set to + * checksum, it can be used when pushing new data. + * * With *from_size* > 0, *to_size* == 0 and *seed* set to + * checksum, it can be used when removing data from a packet. + * * With *from_size* > 0, *to_size* > 0 and *seed* set to 0, it + * can be used to compute a diff. Note that *from_size* and + * *to_size* do not need to be equal. + * + * This helper can be used in combination with + * **bpf_l3_csum_replace**\ () and **bpf_l4_csum_replace**\ (), to + * which one can feed in the difference computed with + * **bpf_csum_diff**\ (). + * Return + * The checksum result, or a negative error code in case of + * failure. + * + * long bpf_skb_get_tunnel_opt(struct sk_buff *skb, void *opt, u32 size) + * Description + * Retrieve tunnel options metadata for the packet associated to + * *skb*, and store the raw tunnel option data to the buffer *opt* + * of *size*. + * + * This helper can be used with encapsulation devices that can + * operate in "collect metadata" mode (please refer to the related + * note in the description of **bpf_skb_get_tunnel_key**\ () for + * more details). A particular example where this can be used is + * in combination with the Geneve encapsulation protocol, where it + * allows for pushing (with **bpf_skb_get_tunnel_opt**\ () helper) + * and retrieving arbitrary TLVs (Type-Length-Value headers) from + * the eBPF program. This allows for full customization of these + * headers. + * Return + * The size of the option data retrieved. + * + * long bpf_skb_set_tunnel_opt(struct sk_buff *skb, void *opt, u32 size) + * Description + * Set tunnel options metadata for the packet associated to *skb* + * to the option data contained in the raw buffer *opt* of *size*. + * + * See also the description of the **bpf_skb_get_tunnel_opt**\ () + * helper for additional information. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_skb_change_proto(struct sk_buff *skb, __be16 proto, u64 flags) + * Description + * Change the protocol of the *skb* to *proto*. Currently + * supported are transition from IPv4 to IPv6, and from IPv6 to + * IPv4. The helper takes care of the groundwork for the + * transition, including resizing the socket buffer. The eBPF + * program is expected to fill the new headers, if any, via + * **skb_store_bytes**\ () and to recompute the checksums with + * **bpf_l3_csum_replace**\ () and **bpf_l4_csum_replace**\ + * (). The main case for this helper is to perform NAT64 + * operations out of an eBPF program. + * + * Internally, the GSO type is marked as dodgy so that headers are + * checked and segments are recalculated by the GSO/GRO engine. + * The size for GSO target is adapted as well. + * + * All values for *flags* are reserved for future usage, and must + * be left at zero. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_skb_change_type(struct sk_buff *skb, u32 type) + * Description + * Change the packet type for the packet associated to *skb*. This + * comes down to setting *skb*\ **->pkt_type** to *type*, except + * the eBPF program does not have a write access to *skb*\ + * **->pkt_type** beside this helper. Using a helper here allows + * for graceful handling of errors. + * + * The major use case is to change incoming *skb*s to + * **PACKET_HOST** in a programmatic way instead of having to + * recirculate via **redirect**\ (..., **BPF_F_INGRESS**), for + * example. + * + * Note that *type* only allows certain values. At this time, they + * are: + * + * **PACKET_HOST** + * Packet is for us. + * **PACKET_BROADCAST** + * Send packet to all. + * **PACKET_MULTICAST** + * Send packet to group. + * **PACKET_OTHERHOST** + * Send packet to someone else. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_skb_under_cgroup(struct sk_buff *skb, struct bpf_map *map, u32 index) + * Description + * Check whether *skb* is a descendant of the cgroup2 held by + * *map* of type **BPF_MAP_TYPE_CGROUP_ARRAY**, at *index*. + * Return + * The return value depends on the result of the test, and can be: + * + * * 0, if the *skb* failed the cgroup2 descendant test. + * * 1, if the *skb* succeeded the cgroup2 descendant test. + * * A negative error code, if an error occurred. + * + * u32 bpf_get_hash_recalc(struct sk_buff *skb) + * Description + * Retrieve the hash of the packet, *skb*\ **->hash**. If it is + * not set, in particular if the hash was cleared due to mangling, + * recompute this hash. Later accesses to the hash can be done + * directly with *skb*\ **->hash**. + * + * Calling **bpf_set_hash_invalid**\ (), changing a packet + * prototype with **bpf_skb_change_proto**\ (), or calling + * **bpf_skb_store_bytes**\ () with the + * **BPF_F_INVALIDATE_HASH** are actions susceptible to clear + * the hash and to trigger a new computation for the next call to + * **bpf_get_hash_recalc**\ (). + * Return + * The 32-bit hash. + * + * u64 bpf_get_current_task(void) + * Description + * Get the current task. + * Return + * A pointer to the current task struct. + * + * long bpf_probe_write_user(void *dst, const void *src, u32 len) + * Description + * Attempt in a safe way to write *len* bytes from the buffer + * *src* to *dst* in memory. It only works for threads that are in + * user context, and *dst* must be a valid user space address. + * + * This helper should not be used to implement any kind of + * security mechanism because of TOC-TOU attacks, but rather to + * debug, divert, and manipulate execution of semi-cooperative + * processes. + * + * Keep in mind that this feature is meant for experiments, and it + * has a risk of crashing the system and running programs. + * Therefore, when an eBPF program using this helper is attached, + * a warning including PID and process name is printed to kernel + * logs. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_current_task_under_cgroup(struct bpf_map *map, u32 index) + * Description + * Check whether the probe is being run is the context of a given + * subset of the cgroup2 hierarchy. The cgroup2 to test is held by + * *map* of type **BPF_MAP_TYPE_CGROUP_ARRAY**, at *index*. + * Return + * The return value depends on the result of the test, and can be: + * + * * 1, if current task belongs to the cgroup2. + * * 0, if current task does not belong to the cgroup2. + * * A negative error code, if an error occurred. + * + * long bpf_skb_change_tail(struct sk_buff *skb, u32 len, u64 flags) + * Description + * Resize (trim or grow) the packet associated to *skb* to the + * new *len*. The *flags* are reserved for future usage, and must + * be left at zero. + * + * The basic idea is that the helper performs the needed work to + * change the size of the packet, then the eBPF program rewrites + * the rest via helpers like **bpf_skb_store_bytes**\ (), + * **bpf_l3_csum_replace**\ (), **bpf_l3_csum_replace**\ () + * and others. This helper is a slow path utility intended for + * replies with control messages. And because it is targeted for + * slow path, the helper itself can afford to be slow: it + * implicitly linearizes, unclones and drops offloads from the + * *skb*. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_skb_pull_data(struct sk_buff *skb, u32 len) + * Description + * Pull in non-linear data in case the *skb* is non-linear and not + * all of *len* are part of the linear section. Make *len* bytes + * from *skb* readable and writable. If a zero value is passed for + * *len*, then all bytes in the linear part of *skb* will be made + * readable and writable. + * + * This helper is only needed for reading and writing with direct + * packet access. + * + * For direct packet access, testing that offsets to access + * are within packet boundaries (test on *skb*\ **->data_end**) is + * susceptible to fail if offsets are invalid, or if the requested + * data is in non-linear parts of the *skb*. On failure the + * program can just bail out, or in the case of a non-linear + * buffer, use a helper to make the data available. The + * **bpf_skb_load_bytes**\ () helper is a first solution to access + * the data. Another one consists in using **bpf_skb_pull_data** + * to pull in once the non-linear parts, then retesting and + * eventually access the data. + * + * At the same time, this also makes sure the *skb* is uncloned, + * which is a necessary condition for direct write. As this needs + * to be an invariant for the write part only, the verifier + * detects writes and adds a prologue that is calling + * **bpf_skb_pull_data()** to effectively unclone the *skb* from + * the very beginning in case it is indeed cloned. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * s64 bpf_csum_update(struct sk_buff *skb, __wsum csum) + * Description + * Add the checksum *csum* into *skb*\ **->csum** in case the + * driver has supplied a checksum for the entire packet into that + * field. Return an error otherwise. This helper is intended to be + * used in combination with **bpf_csum_diff**\ (), in particular + * when the checksum needs to be updated after data has been + * written into the packet through direct packet access. + * Return + * The checksum on success, or a negative error code in case of + * failure. + * + * void bpf_set_hash_invalid(struct sk_buff *skb) + * Description + * Invalidate the current *skb*\ **->hash**. It can be used after + * mangling on headers through direct packet access, in order to + * indicate that the hash is outdated and to trigger a + * recalculation the next time the kernel tries to access this + * hash or when the **bpf_get_hash_recalc**\ () helper is called. + * Return + * void. + * + * long bpf_get_numa_node_id(void) + * Description + * Return the id of the current NUMA node. The primary use case + * for this helper is the selection of sockets for the local NUMA + * node, when the program is attached to sockets using the + * **SO_ATTACH_REUSEPORT_EBPF** option (see also **socket(7)**), + * but the helper is also available to other eBPF program types, + * similarly to **bpf_get_smp_processor_id**\ (). + * Return + * The id of current NUMA node. + * + * long bpf_skb_change_head(struct sk_buff *skb, u32 len, u64 flags) + * Description + * Grows headroom of packet associated to *skb* and adjusts the + * offset of the MAC header accordingly, adding *len* bytes of + * space. It automatically extends and reallocates memory as + * required. + * + * This helper can be used on a layer 3 *skb* to push a MAC header + * for redirection into a layer 2 device. + * + * All values for *flags* are reserved for future usage, and must + * be left at zero. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_xdp_adjust_head(struct xdp_buff *xdp_md, int delta) + * Description + * Adjust (move) *xdp_md*\ **->data** by *delta* bytes. Note that + * it is possible to use a negative value for *delta*. This helper + * can be used to prepare the packet for pushing or popping + * headers. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_probe_read_str(void *dst, u32 size, const void *unsafe_ptr) + * Description + * Copy a NUL terminated string from an unsafe kernel address + * *unsafe_ptr* to *dst*. See **bpf_probe_read_kernel_str**\ () for + * more details. + * + * Generally, use **bpf_probe_read_user_str**\ () or + * **bpf_probe_read_kernel_str**\ () instead. + * Return + * On success, the strictly positive length of the string, + * including the trailing NUL character. On error, a negative + * value. + * + * u64 bpf_get_socket_cookie(struct sk_buff *skb) + * Description + * If the **struct sk_buff** pointed by *skb* has a known socket, + * retrieve the cookie (generated by the kernel) of this socket. + * If no cookie has been set yet, generate a new cookie. Once + * generated, the socket cookie remains stable for the life of the + * socket. This helper can be useful for monitoring per socket + * networking traffic statistics as it provides a global socket + * identifier that can be assumed unique. + * Return + * A 8-byte long unique number on success, or 0 if the socket + * field is missing inside *skb*. + * + * u64 bpf_get_socket_cookie(struct bpf_sock_addr *ctx) + * Description + * Equivalent to bpf_get_socket_cookie() helper that accepts + * *skb*, but gets socket from **struct bpf_sock_addr** context. + * Return + * A 8-byte long unique number. + * + * u64 bpf_get_socket_cookie(struct bpf_sock_ops *ctx) + * Description + * Equivalent to **bpf_get_socket_cookie**\ () helper that accepts + * *skb*, but gets socket from **struct bpf_sock_ops** context. + * Return + * A 8-byte long unique number. + * + * u64 bpf_get_socket_cookie(struct sock *sk) + * Description + * Equivalent to **bpf_get_socket_cookie**\ () helper that accepts + * *sk*, but gets socket from a BTF **struct sock**. This helper + * also works for sleepable programs. + * Return + * A 8-byte long unique number or 0 if *sk* is NULL. + * + * u32 bpf_get_socket_uid(struct sk_buff *skb) + * Description + * Get the owner UID of the socked associated to *skb*. + * Return + * The owner UID of the socket associated to *skb*. If the socket + * is **NULL**, or if it is not a full socket (i.e. if it is a + * time-wait or a request socket instead), **overflowuid** value + * is returned (note that **overflowuid** might also be the actual + * UID value for the socket). + * + * long bpf_set_hash(struct sk_buff *skb, u32 hash) + * Description + * Set the full hash for *skb* (set the field *skb*\ **->hash**) + * to value *hash*. + * Return + * 0 + * + * long bpf_setsockopt(void *bpf_socket, int level, int optname, void *optval, int optlen) + * Description + * Emulate a call to **setsockopt()** on the socket associated to + * *bpf_socket*, which must be a full socket. The *level* at + * which the option resides and the name *optname* of the option + * must be specified, see **setsockopt(2)** for more information. + * The option value of length *optlen* is pointed by *optval*. + * + * *bpf_socket* should be one of the following: + * + * * **struct bpf_sock_ops** for **BPF_PROG_TYPE_SOCK_OPS**. + * * **struct bpf_sock_addr** for **BPF_CGROUP_INET4_CONNECT**, + * **BPF_CGROUP_INET6_CONNECT** and **BPF_CGROUP_UNIX_CONNECT**. + * + * This helper actually implements a subset of **setsockopt()**. + * It supports the following *level*\ s: + * + * * **SOL_SOCKET**, which supports the following *optname*\ s: + * **SO_RCVBUF**, **SO_SNDBUF**, **SO_MAX_PACING_RATE**, + * **SO_PRIORITY**, **SO_RCVLOWAT**, **SO_MARK**, + * **SO_BINDTODEVICE**, **SO_KEEPALIVE**, **SO_REUSEADDR**, + * **SO_REUSEPORT**, **SO_BINDTOIFINDEX**, **SO_TXREHASH**. + * * **IPPROTO_TCP**, which supports the following *optname*\ s: + * **TCP_CONGESTION**, **TCP_BPF_IW**, + * **TCP_BPF_SNDCWND_CLAMP**, **TCP_SAVE_SYN**, + * **TCP_KEEPIDLE**, **TCP_KEEPINTVL**, **TCP_KEEPCNT**, + * **TCP_SYNCNT**, **TCP_USER_TIMEOUT**, **TCP_NOTSENT_LOWAT**, + * **TCP_NODELAY**, **TCP_MAXSEG**, **TCP_WINDOW_CLAMP**, + * **TCP_THIN_LINEAR_TIMEOUTS**, **TCP_BPF_DELACK_MAX**, + * **TCP_BPF_RTO_MIN**, **TCP_BPF_SOCK_OPS_CB_FLAGS**. + * * **IPPROTO_IP**, which supports *optname* **IP_TOS**. + * * **IPPROTO_IPV6**, which supports the following *optname*\ s: + * **IPV6_TCLASS**, **IPV6_AUTOFLOWLABEL**. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_skb_adjust_room(struct sk_buff *skb, s32 len_diff, u32 mode, u64 flags) + * Description + * Grow or shrink the room for data in the packet associated to + * *skb* by *len_diff*, and according to the selected *mode*. + * + * By default, the helper will reset any offloaded checksum + * indicator of the skb to CHECKSUM_NONE. This can be avoided + * by the following flag: + * + * * **BPF_F_ADJ_ROOM_NO_CSUM_RESET**: Do not reset offloaded + * checksum data of the skb to CHECKSUM_NONE. + * + * There are two supported modes at this time: + * + * * **BPF_ADJ_ROOM_MAC**: Adjust room at the mac layer + * (room space is added or removed between the layer 2 and + * layer 3 headers). + * + * * **BPF_ADJ_ROOM_NET**: Adjust room at the network layer + * (room space is added or removed between the layer 3 and + * layer 4 headers). + * + * The following flags are supported at this time: + * + * * **BPF_F_ADJ_ROOM_FIXED_GSO**: Do not adjust gso_size. + * Adjusting mss in this way is not allowed for datagrams. + * + * * **BPF_F_ADJ_ROOM_ENCAP_L3_IPV4**, + * **BPF_F_ADJ_ROOM_ENCAP_L3_IPV6**: + * Any new space is reserved to hold a tunnel header. + * Configure skb offsets and other fields accordingly. + * + * * **BPF_F_ADJ_ROOM_ENCAP_L4_GRE**, + * **BPF_F_ADJ_ROOM_ENCAP_L4_UDP**: + * Use with ENCAP_L3 flags to further specify the tunnel type. + * + * * **BPF_F_ADJ_ROOM_ENCAP_L2**\ (*len*): + * Use with ENCAP_L3/L4 flags to further specify the tunnel + * type; *len* is the length of the inner MAC header. + * + * * **BPF_F_ADJ_ROOM_ENCAP_L2_ETH**: + * Use with BPF_F_ADJ_ROOM_ENCAP_L2 flag to further specify the + * L2 type as Ethernet. + * + * * **BPF_F_ADJ_ROOM_DECAP_L3_IPV4**, + * **BPF_F_ADJ_ROOM_DECAP_L3_IPV6**: + * Indicate the new IP header version after decapsulating the outer + * IP header. Used when the inner and outer IP versions are different. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_redirect_map(struct bpf_map *map, u64 key, u64 flags) + * Description + * Redirect the packet to the endpoint referenced by *map* at + * index *key*. Depending on its type, this *map* can contain + * references to net devices (for forwarding packets through other + * ports), or to CPUs (for redirecting XDP frames to another CPU; + * but this is only implemented for native XDP (with driver + * support) as of this writing). + * + * The lower two bits of *flags* are used as the return code if + * the map lookup fails. This is so that the return value can be + * one of the XDP program return codes up to **XDP_TX**, as chosen + * by the caller. The higher bits of *flags* can be set to + * BPF_F_BROADCAST or BPF_F_EXCLUDE_INGRESS as defined below. + * + * With BPF_F_BROADCAST the packet will be broadcasted to all the + * interfaces in the map, with BPF_F_EXCLUDE_INGRESS the ingress + * interface will be excluded when do broadcasting. + * + * See also **bpf_redirect**\ (), which only supports redirecting + * to an ifindex, but doesn't require a map to do so. + * Return + * **XDP_REDIRECT** on success, or the value of the two lower bits + * of the *flags* argument on error. + * + * long bpf_sk_redirect_map(struct sk_buff *skb, struct bpf_map *map, u32 key, u64 flags) + * Description + * Redirect the packet to the socket referenced by *map* (of type + * **BPF_MAP_TYPE_SOCKMAP**) at index *key*. Both ingress and + * egress interfaces can be used for redirection. The + * **BPF_F_INGRESS** value in *flags* is used to make the + * distinction (ingress path is selected if the flag is present, + * egress path otherwise). This is the only flag supported for now. + * Return + * **SK_PASS** on success, or **SK_DROP** on error. + * + * long bpf_sock_map_update(struct bpf_sock_ops *skops, struct bpf_map *map, void *key, u64 flags) + * Description + * Add an entry to, or update a *map* referencing sockets. The + * *skops* is used as a new value for the entry associated to + * *key*. *flags* is one of: + * + * **BPF_NOEXIST** + * The entry for *key* must not exist in the map. + * **BPF_EXIST** + * The entry for *key* must already exist in the map. + * **BPF_ANY** + * No condition on the existence of the entry for *key*. + * + * If the *map* has eBPF programs (parser and verdict), those will + * be inherited by the socket being added. If the socket is + * already attached to eBPF programs, this results in an error. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_xdp_adjust_meta(struct xdp_buff *xdp_md, int delta) + * Description + * Adjust the address pointed by *xdp_md*\ **->data_meta** by + * *delta* (which can be positive or negative). Note that this + * operation modifies the address stored in *xdp_md*\ **->data**, + * so the latter must be loaded only after the helper has been + * called. + * + * The use of *xdp_md*\ **->data_meta** is optional and programs + * are not required to use it. The rationale is that when the + * packet is processed with XDP (e.g. as DoS filter), it is + * possible to push further meta data along with it before passing + * to the stack, and to give the guarantee that an ingress eBPF + * program attached as a TC classifier on the same device can pick + * this up for further post-processing. Since TC works with socket + * buffers, it remains possible to set from XDP the **mark** or + * **priority** pointers, or other pointers for the socket buffer. + * Having this scratch space generic and programmable allows for + * more flexibility as the user is free to store whatever meta + * data they need. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_perf_event_read_value(struct bpf_map *map, u64 flags, struct bpf_perf_event_value *buf, u32 buf_size) + * Description + * Read the value of a perf event counter, and store it into *buf* + * of size *buf_size*. This helper relies on a *map* of type + * **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. The nature of the perf event + * counter is selected when *map* is updated with perf event file + * descriptors. The *map* is an array whose size is the number of + * available CPUs, and each cell contains a value relative to one + * CPU. The value to retrieve is indicated by *flags*, that + * contains the index of the CPU to look up, masked with + * **BPF_F_INDEX_MASK**. Alternatively, *flags* can be set to + * **BPF_F_CURRENT_CPU** to indicate that the value for the + * current CPU should be retrieved. + * + * This helper behaves in a way close to + * **bpf_perf_event_read**\ () helper, save that instead of + * just returning the value observed, it fills the *buf* + * structure. This allows for additional data to be retrieved: in + * particular, the enabled and running times (in *buf*\ + * **->enabled** and *buf*\ **->running**, respectively) are + * copied. In general, **bpf_perf_event_read_value**\ () is + * recommended over **bpf_perf_event_read**\ (), which has some + * ABI issues and provides fewer functionalities. + * + * These values are interesting, because hardware PMU (Performance + * Monitoring Unit) counters are limited resources. When there are + * more PMU based perf events opened than available counters, + * kernel will multiplex these events so each event gets certain + * percentage (but not all) of the PMU time. In case that + * multiplexing happens, the number of samples or counter value + * will not reflect the case compared to when no multiplexing + * occurs. This makes comparison between different runs difficult. + * Typically, the counter value should be normalized before + * comparing to other experiments. The usual normalization is done + * as follows. + * + * :: + * + * normalized_counter = counter * t_enabled / t_running + * + * Where t_enabled is the time enabled for event and t_running is + * the time running for event since last normalization. The + * enabled and running times are accumulated since the perf event + * open. To achieve scaling factor between two invocations of an + * eBPF program, users can use CPU id as the key (which is + * typical for perf array usage model) to remember the previous + * value and do the calculation inside the eBPF program. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_perf_prog_read_value(struct bpf_perf_event_data *ctx, struct bpf_perf_event_value *buf, u32 buf_size) + * Description + * For an eBPF program attached to a perf event, retrieve the + * value of the event counter associated to *ctx* and store it in + * the structure pointed by *buf* and of size *buf_size*. Enabled + * and running times are also stored in the structure (see + * description of helper **bpf_perf_event_read_value**\ () for + * more details). + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_getsockopt(void *bpf_socket, int level, int optname, void *optval, int optlen) + * Description + * Emulate a call to **getsockopt()** on the socket associated to + * *bpf_socket*, which must be a full socket. The *level* at + * which the option resides and the name *optname* of the option + * must be specified, see **getsockopt(2)** for more information. + * The retrieved value is stored in the structure pointed by + * *opval* and of length *optlen*. + * + * *bpf_socket* should be one of the following: + * + * * **struct bpf_sock_ops** for **BPF_PROG_TYPE_SOCK_OPS**. + * * **struct bpf_sock_addr** for **BPF_CGROUP_INET4_CONNECT**, + * **BPF_CGROUP_INET6_CONNECT** and **BPF_CGROUP_UNIX_CONNECT**. + * + * This helper actually implements a subset of **getsockopt()**. + * It supports the same set of *optname*\ s that is supported by + * the **bpf_setsockopt**\ () helper. The exceptions are + * **TCP_BPF_*** is **bpf_setsockopt**\ () only and + * **TCP_SAVED_SYN** is **bpf_getsockopt**\ () only. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_override_return(struct pt_regs *regs, u64 rc) + * Description + * Used for error injection, this helper uses kprobes to override + * the return value of the probed function, and to set it to *rc*. + * The first argument is the context *regs* on which the kprobe + * works. + * + * This helper works by setting the PC (program counter) + * to an override function which is run in place of the original + * probed function. This means the probed function is not run at + * all. The replacement function just returns with the required + * value. + * + * This helper has security implications, and thus is subject to + * restrictions. It is only available if the kernel was compiled + * with the **CONFIG_BPF_KPROBE_OVERRIDE** configuration + * option, and in this case it only works on functions tagged with + * **ALLOW_ERROR_INJECTION** in the kernel code. + * Return + * 0 + * + * long bpf_sock_ops_cb_flags_set(struct bpf_sock_ops *bpf_sock, int argval) + * Description + * Attempt to set the value of the **bpf_sock_ops_cb_flags** field + * for the full TCP socket associated to *bpf_sock_ops* to + * *argval*. + * + * The primary use of this field is to determine if there should + * be calls to eBPF programs of type + * **BPF_PROG_TYPE_SOCK_OPS** at various points in the TCP + * code. A program of the same type can change its value, per + * connection and as necessary, when the connection is + * established. This field is directly accessible for reading, but + * this helper must be used for updates in order to return an + * error if an eBPF program tries to set a callback that is not + * supported in the current kernel. + * + * *argval* is a flag array which can combine these flags: + * + * * **BPF_SOCK_OPS_RTO_CB_FLAG** (retransmission time out) + * * **BPF_SOCK_OPS_RETRANS_CB_FLAG** (retransmission) + * * **BPF_SOCK_OPS_STATE_CB_FLAG** (TCP state change) + * * **BPF_SOCK_OPS_RTT_CB_FLAG** (every RTT) + * + * Therefore, this function can be used to clear a callback flag by + * setting the appropriate bit to zero. e.g. to disable the RTO + * callback: + * + * **bpf_sock_ops_cb_flags_set(bpf_sock,** + * **bpf_sock->bpf_sock_ops_cb_flags & ~BPF_SOCK_OPS_RTO_CB_FLAG)** + * + * Here are some examples of where one could call such eBPF + * program: + * + * * When RTO fires. + * * When a packet is retransmitted. + * * When the connection terminates. + * * When a packet is sent. + * * When a packet is received. + * Return + * Code **-EINVAL** if the socket is not a full TCP socket; + * otherwise, a positive number containing the bits that could not + * be set is returned (which comes down to 0 if all bits were set + * as required). + * + * long bpf_msg_redirect_map(struct sk_msg_buff *msg, struct bpf_map *map, u32 key, u64 flags) + * Description + * This helper is used in programs implementing policies at the + * socket level. If the message *msg* is allowed to pass (i.e. if + * the verdict eBPF program returns **SK_PASS**), redirect it to + * the socket referenced by *map* (of type + * **BPF_MAP_TYPE_SOCKMAP**) at index *key*. Both ingress and + * egress interfaces can be used for redirection. The + * **BPF_F_INGRESS** value in *flags* is used to make the + * distinction (ingress path is selected if the flag is present, + * egress path otherwise). This is the only flag supported for now. + * Return + * **SK_PASS** on success, or **SK_DROP** on error. + * + * long bpf_msg_apply_bytes(struct sk_msg_buff *msg, u32 bytes) + * Description + * For socket policies, apply the verdict of the eBPF program to + * the next *bytes* (number of bytes) of message *msg*. + * + * For example, this helper can be used in the following cases: + * + * * A single **sendmsg**\ () or **sendfile**\ () system call + * contains multiple logical messages that the eBPF program is + * supposed to read and for which it should apply a verdict. + * * An eBPF program only cares to read the first *bytes* of a + * *msg*. If the message has a large payload, then setting up + * and calling the eBPF program repeatedly for all bytes, even + * though the verdict is already known, would create unnecessary + * overhead. + * + * When called from within an eBPF program, the helper sets a + * counter internal to the BPF infrastructure, that is used to + * apply the last verdict to the next *bytes*. If *bytes* is + * smaller than the current data being processed from a + * **sendmsg**\ () or **sendfile**\ () system call, the first + * *bytes* will be sent and the eBPF program will be re-run with + * the pointer for start of data pointing to byte number *bytes* + * **+ 1**. If *bytes* is larger than the current data being + * processed, then the eBPF verdict will be applied to multiple + * **sendmsg**\ () or **sendfile**\ () calls until *bytes* are + * consumed. + * + * Note that if a socket closes with the internal counter holding + * a non-zero value, this is not a problem because data is not + * being buffered for *bytes* and is sent as it is received. + * Return + * 0 + * + * long bpf_msg_cork_bytes(struct sk_msg_buff *msg, u32 bytes) + * Description + * For socket policies, prevent the execution of the verdict eBPF + * program for message *msg* until *bytes* (byte number) have been + * accumulated. + * + * This can be used when one needs a specific number of bytes + * before a verdict can be assigned, even if the data spans + * multiple **sendmsg**\ () or **sendfile**\ () calls. The extreme + * case would be a user calling **sendmsg**\ () repeatedly with + * 1-byte long message segments. Obviously, this is bad for + * performance, but it is still valid. If the eBPF program needs + * *bytes* bytes to validate a header, this helper can be used to + * prevent the eBPF program to be called again until *bytes* have + * been accumulated. + * Return + * 0 + * + * long bpf_msg_pull_data(struct sk_msg_buff *msg, u32 start, u32 end, u64 flags) + * Description + * For socket policies, pull in non-linear data from user space + * for *msg* and set pointers *msg*\ **->data** and *msg*\ + * **->data_end** to *start* and *end* bytes offsets into *msg*, + * respectively. + * + * If a program of type **BPF_PROG_TYPE_SK_MSG** is run on a + * *msg* it can only parse data that the (**data**, **data_end**) + * pointers have already consumed. For **sendmsg**\ () hooks this + * is likely the first scatterlist element. But for calls relying + * on the **sendpage** handler (e.g. **sendfile**\ ()) this will + * be the range (**0**, **0**) because the data is shared with + * user space and by default the objective is to avoid allowing + * user space to modify data while (or after) eBPF verdict is + * being decided. This helper can be used to pull in data and to + * set the start and end pointer to given values. Data will be + * copied if necessary (i.e. if data was not linear and if start + * and end pointers do not point to the same chunk). + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * + * All values for *flags* are reserved for future usage, and must + * be left at zero. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_bind(struct bpf_sock_addr *ctx, struct sockaddr *addr, int addr_len) + * Description + * Bind the socket associated to *ctx* to the address pointed by + * *addr*, of length *addr_len*. This allows for making outgoing + * connection from the desired IP address, which can be useful for + * example when all processes inside a cgroup should use one + * single IP address on a host that has multiple IP configured. + * + * This helper works for IPv4 and IPv6, TCP and UDP sockets. The + * domain (*addr*\ **->sa_family**) must be **AF_INET** (or + * **AF_INET6**). It's advised to pass zero port (**sin_port** + * or **sin6_port**) which triggers IP_BIND_ADDRESS_NO_PORT-like + * behavior and lets the kernel efficiently pick up an unused + * port as long as 4-tuple is unique. Passing non-zero port might + * lead to degraded performance. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_xdp_adjust_tail(struct xdp_buff *xdp_md, int delta) + * Description + * Adjust (move) *xdp_md*\ **->data_end** by *delta* bytes. It is + * possible to both shrink and grow the packet tail. + * Shrink done via *delta* being a negative integer. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_skb_get_xfrm_state(struct sk_buff *skb, u32 index, struct bpf_xfrm_state *xfrm_state, u32 size, u64 flags) + * Description + * Retrieve the XFRM state (IP transform framework, see also + * **ip-xfrm(8)**) at *index* in XFRM "security path" for *skb*. + * + * The retrieved value is stored in the **struct bpf_xfrm_state** + * pointed by *xfrm_state* and of length *size*. + * + * All values for *flags* are reserved for future usage, and must + * be left at zero. + * + * This helper is available only if the kernel was compiled with + * **CONFIG_XFRM** configuration option. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_get_stack(void *ctx, void *buf, u32 size, u64 flags) + * Description + * Return a user or a kernel stack in bpf program provided buffer. + * To achieve this, the helper needs *ctx*, which is a pointer + * to the context on which the tracing program is executed. + * To store the stacktrace, the bpf program provides *buf* with + * a nonnegative *size*. + * + * The last argument, *flags*, holds the number of stack frames to + * skip (from 0 to 255), masked with + * **BPF_F_SKIP_FIELD_MASK**. The next bits can be used to set + * the following flags: + * + * **BPF_F_USER_STACK** + * Collect a user space stack instead of a kernel stack. + * **BPF_F_USER_BUILD_ID** + * Collect (build_id, file_offset) instead of ips for user + * stack, only valid if **BPF_F_USER_STACK** is also + * specified. + * + * *file_offset* is an offset relative to the beginning + * of the executable or shared object file backing the vma + * which the *ip* falls in. It is *not* an offset relative + * to that object's base address. Accordingly, it must be + * adjusted by adding (sh_addr - sh_offset), where + * sh_{addr,offset} correspond to the executable section + * containing *file_offset* in the object, for comparisons + * to symbols' st_value to be valid. + * + * **bpf_get_stack**\ () can collect up to + * **PERF_MAX_STACK_DEPTH** both kernel and user frames, subject + * to sufficient large buffer size. Note that + * this limit can be controlled with the **sysctl** program, and + * that it should be manually increased in order to profile long + * user stacks (such as stacks for Java programs). To do so, use: + * + * :: + * + * # sysctl kernel.perf_event_max_stack=<new value> + * Return + * The non-negative copied *buf* length equal to or less than + * *size* on success, or a negative error in case of failure. + * + * long bpf_skb_load_bytes_relative(const void *skb, u32 offset, void *to, u32 len, u32 start_header) + * Description + * This helper is similar to **bpf_skb_load_bytes**\ () in that + * it provides an easy way to load *len* bytes from *offset* + * from the packet associated to *skb*, into the buffer pointed + * by *to*. The difference to **bpf_skb_load_bytes**\ () is that + * a fifth argument *start_header* exists in order to select a + * base offset to start from. *start_header* can be one of: + * + * **BPF_HDR_START_MAC** + * Base offset to load data from is *skb*'s mac header. + * **BPF_HDR_START_NET** + * Base offset to load data from is *skb*'s network header. + * + * In general, "direct packet access" is the preferred method to + * access packet data, however, this helper is in particular useful + * in socket filters where *skb*\ **->data** does not always point + * to the start of the mac header and where "direct packet access" + * is not available. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_fib_lookup(void *ctx, struct bpf_fib_lookup *params, int plen, u32 flags) + * Description + * Do FIB lookup in kernel tables using parameters in *params*. + * If lookup is successful and result shows packet is to be + * forwarded, the neighbor tables are searched for the nexthop. + * If successful (ie., FIB lookup shows forwarding and nexthop + * is resolved), the nexthop address is returned in ipv4_dst + * or ipv6_dst based on family, smac is set to mac address of + * egress device, dmac is set to nexthop mac address, rt_metric + * is set to metric from route (IPv4/IPv6 only), and ifindex + * is set to the device index of the nexthop from the FIB lookup. + * + * *plen* argument is the size of the passed in struct. + * *flags* argument can be a combination of one or more of the + * following values: + * + * **BPF_FIB_LOOKUP_DIRECT** + * Do a direct table lookup vs full lookup using FIB + * rules. + * **BPF_FIB_LOOKUP_TBID** + * Used with BPF_FIB_LOOKUP_DIRECT. + * Use the routing table ID present in *params*->tbid + * for the fib lookup. + * **BPF_FIB_LOOKUP_OUTPUT** + * Perform lookup from an egress perspective (default is + * ingress). + * **BPF_FIB_LOOKUP_SKIP_NEIGH** + * Skip the neighbour table lookup. *params*->dmac + * and *params*->smac will not be set as output. A common + * use case is to call **bpf_redirect_neigh**\ () after + * doing **bpf_fib_lookup**\ (). + * **BPF_FIB_LOOKUP_SRC** + * Derive and set source IP addr in *params*->ipv{4,6}_src + * for the nexthop. If the src addr cannot be derived, + * **BPF_FIB_LKUP_RET_NO_SRC_ADDR** is returned. In this + * case, *params*->dmac and *params*->smac are not set either. + * **BPF_FIB_LOOKUP_MARK** + * Use the mark present in *params*->mark for the fib lookup. + * This option should not be used with BPF_FIB_LOOKUP_DIRECT, + * as it only has meaning for full lookups. + * + * *ctx* is either **struct xdp_md** for XDP programs or + * **struct sk_buff** tc cls_act programs. + * Return + * * < 0 if any input argument is invalid + * * 0 on success (packet is forwarded, nexthop neighbor exists) + * * > 0 one of **BPF_FIB_LKUP_RET_** codes explaining why the + * packet is not forwarded or needs assist from full stack + * + * If lookup fails with BPF_FIB_LKUP_RET_FRAG_NEEDED, then the MTU + * was exceeded and output params->mtu_result contains the MTU. + * + * long bpf_sock_hash_update(struct bpf_sock_ops *skops, struct bpf_map *map, void *key, u64 flags) + * Description + * Add an entry to, or update a sockhash *map* referencing sockets. + * The *skops* is used as a new value for the entry associated to + * *key*. *flags* is one of: + * + * **BPF_NOEXIST** + * The entry for *key* must not exist in the map. + * **BPF_EXIST** + * The entry for *key* must already exist in the map. + * **BPF_ANY** + * No condition on the existence of the entry for *key*. + * + * If the *map* has eBPF programs (parser and verdict), those will + * be inherited by the socket being added. If the socket is + * already attached to eBPF programs, this results in an error. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_msg_redirect_hash(struct sk_msg_buff *msg, struct bpf_map *map, void *key, u64 flags) + * Description + * This helper is used in programs implementing policies at the + * socket level. If the message *msg* is allowed to pass (i.e. if + * the verdict eBPF program returns **SK_PASS**), redirect it to + * the socket referenced by *map* (of type + * **BPF_MAP_TYPE_SOCKHASH**) using hash *key*. Both ingress and + * egress interfaces can be used for redirection. The + * **BPF_F_INGRESS** value in *flags* is used to make the + * distinction (ingress path is selected if the flag is present, + * egress path otherwise). This is the only flag supported for now. + * Return + * **SK_PASS** on success, or **SK_DROP** on error. + * + * long bpf_sk_redirect_hash(struct sk_buff *skb, struct bpf_map *map, void *key, u64 flags) + * Description + * This helper is used in programs implementing policies at the + * skb socket level. If the sk_buff *skb* is allowed to pass (i.e. + * if the verdict eBPF program returns **SK_PASS**), redirect it + * to the socket referenced by *map* (of type + * **BPF_MAP_TYPE_SOCKHASH**) using hash *key*. Both ingress and + * egress interfaces can be used for redirection. The + * **BPF_F_INGRESS** value in *flags* is used to make the + * distinction (ingress path is selected if the flag is present, + * egress otherwise). This is the only flag supported for now. + * Return + * **SK_PASS** on success, or **SK_DROP** on error. + * + * long bpf_lwt_push_encap(struct sk_buff *skb, u32 type, void *hdr, u32 len) + * Description + * Encapsulate the packet associated to *skb* within a Layer 3 + * protocol header. This header is provided in the buffer at + * address *hdr*, with *len* its size in bytes. *type* indicates + * the protocol of the header and can be one of: + * + * **BPF_LWT_ENCAP_SEG6** + * IPv6 encapsulation with Segment Routing Header + * (**struct ipv6_sr_hdr**). *hdr* only contains the SRH, + * the IPv6 header is computed by the kernel. + * **BPF_LWT_ENCAP_SEG6_INLINE** + * Only works if *skb* contains an IPv6 packet. Insert a + * Segment Routing Header (**struct ipv6_sr_hdr**) inside + * the IPv6 header. + * **BPF_LWT_ENCAP_IP** + * IP encapsulation (GRE/GUE/IPIP/etc). The outer header + * must be IPv4 or IPv6, followed by zero or more + * additional headers, up to **LWT_BPF_MAX_HEADROOM** + * total bytes in all prepended headers. Please note that + * if **skb_is_gso**\ (*skb*) is true, no more than two + * headers can be prepended, and the inner header, if + * present, should be either GRE or UDP/GUE. + * + * **BPF_LWT_ENCAP_SEG6**\ \* types can be called by BPF programs + * of type **BPF_PROG_TYPE_LWT_IN**; **BPF_LWT_ENCAP_IP** type can + * be called by bpf programs of types **BPF_PROG_TYPE_LWT_IN** and + * **BPF_PROG_TYPE_LWT_XMIT**. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_lwt_seg6_store_bytes(struct sk_buff *skb, u32 offset, const void *from, u32 len) + * Description + * Store *len* bytes from address *from* into the packet + * associated to *skb*, at *offset*. Only the flags, tag and TLVs + * inside the outermost IPv6 Segment Routing Header can be + * modified through this helper. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_lwt_seg6_adjust_srh(struct sk_buff *skb, u32 offset, s32 delta) + * Description + * Adjust the size allocated to TLVs in the outermost IPv6 + * Segment Routing Header contained in the packet associated to + * *skb*, at position *offset* by *delta* bytes. Only offsets + * after the segments are accepted. *delta* can be as well + * positive (growing) as negative (shrinking). + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_lwt_seg6_action(struct sk_buff *skb, u32 action, void *param, u32 param_len) + * Description + * Apply an IPv6 Segment Routing action of type *action* to the + * packet associated to *skb*. Each action takes a parameter + * contained at address *param*, and of length *param_len* bytes. + * *action* can be one of: + * + * **SEG6_LOCAL_ACTION_END_X** + * End.X action: Endpoint with Layer-3 cross-connect. + * Type of *param*: **struct in6_addr**. + * **SEG6_LOCAL_ACTION_END_T** + * End.T action: Endpoint with specific IPv6 table lookup. + * Type of *param*: **int**. + * **SEG6_LOCAL_ACTION_END_B6** + * End.B6 action: Endpoint bound to an SRv6 policy. + * Type of *param*: **struct ipv6_sr_hdr**. + * **SEG6_LOCAL_ACTION_END_B6_ENCAP** + * End.B6.Encap action: Endpoint bound to an SRv6 + * encapsulation policy. + * Type of *param*: **struct ipv6_sr_hdr**. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_rc_repeat(void *ctx) + * Description + * This helper is used in programs implementing IR decoding, to + * report a successfully decoded repeat key message. This delays + * the generation of a key up event for previously generated + * key down event. + * + * Some IR protocols like NEC have a special IR message for + * repeating last button, for when a button is held down. + * + * The *ctx* should point to the lirc sample as passed into + * the program. + * + * This helper is only available is the kernel was compiled with + * the **CONFIG_BPF_LIRC_MODE2** configuration option set to + * "**y**". + * Return + * 0 + * + * long bpf_rc_keydown(void *ctx, u32 protocol, u64 scancode, u32 toggle) + * Description + * This helper is used in programs implementing IR decoding, to + * report a successfully decoded key press with *scancode*, + * *toggle* value in the given *protocol*. The scancode will be + * translated to a keycode using the rc keymap, and reported as + * an input key down event. After a period a key up event is + * generated. This period can be extended by calling either + * **bpf_rc_keydown**\ () again with the same values, or calling + * **bpf_rc_repeat**\ (). + * + * Some protocols include a toggle bit, in case the button was + * released and pressed again between consecutive scancodes. + * + * The *ctx* should point to the lirc sample as passed into + * the program. + * + * The *protocol* is the decoded protocol number (see + * **enum rc_proto** for some predefined values). + * + * This helper is only available is the kernel was compiled with + * the **CONFIG_BPF_LIRC_MODE2** configuration option set to + * "**y**". + * Return + * 0 + * + * u64 bpf_skb_cgroup_id(struct sk_buff *skb) + * Description + * Return the cgroup v2 id of the socket associated with the *skb*. + * This is roughly similar to the **bpf_get_cgroup_classid**\ () + * helper for cgroup v1 by providing a tag resp. identifier that + * can be matched on or used for map lookups e.g. to implement + * policy. The cgroup v2 id of a given path in the hierarchy is + * exposed in user space through the f_handle API in order to get + * to the same 64-bit id. + * + * This helper can be used on TC egress path, but not on ingress, + * and is available only if the kernel was compiled with the + * **CONFIG_SOCK_CGROUP_DATA** configuration option. + * Return + * The id is returned or 0 in case the id could not be retrieved. + * + * u64 bpf_get_current_cgroup_id(void) + * Description + * Get the current cgroup id based on the cgroup within which + * the current task is running. + * Return + * A 64-bit integer containing the current cgroup id based + * on the cgroup within which the current task is running. + * + * void *bpf_get_local_storage(void *map, u64 flags) + * Description + * Get the pointer to the local storage area. + * The type and the size of the local storage is defined + * by the *map* argument. + * The *flags* meaning is specific for each map type, + * and has to be 0 for cgroup local storage. + * + * Depending on the BPF program type, a local storage area + * can be shared between multiple instances of the BPF program, + * running simultaneously. + * + * A user should care about the synchronization by himself. + * For example, by using the **BPF_ATOMIC** instructions to alter + * the shared data. + * Return + * A pointer to the local storage area. + * + * long bpf_sk_select_reuseport(struct sk_reuseport_md *reuse, struct bpf_map *map, void *key, u64 flags) + * Description + * Select a **SO_REUSEPORT** socket from a + * **BPF_MAP_TYPE_REUSEPORT_SOCKARRAY** *map*. + * It checks the selected socket is matching the incoming + * request in the socket buffer. + * Return + * 0 on success, or a negative error in case of failure. + * + * u64 bpf_skb_ancestor_cgroup_id(struct sk_buff *skb, int ancestor_level) + * Description + * Return id of cgroup v2 that is ancestor of cgroup associated + * with the *skb* at the *ancestor_level*. The root cgroup is at + * *ancestor_level* zero and each step down the hierarchy + * increments the level. If *ancestor_level* == level of cgroup + * associated with *skb*, then return value will be same as that + * of **bpf_skb_cgroup_id**\ (). + * + * The helper is useful to implement policies based on cgroups + * that are upper in hierarchy than immediate cgroup associated + * with *skb*. + * + * The format of returned id and helper limitations are same as in + * **bpf_skb_cgroup_id**\ (). + * Return + * The id is returned or 0 in case the id could not be retrieved. + * + * struct bpf_sock *bpf_sk_lookup_tcp(void *ctx, struct bpf_sock_tuple *tuple, u32 tuple_size, u64 netns, u64 flags) + * Description + * Look for TCP socket matching *tuple*, optionally in a child + * network namespace *netns*. The return value must be checked, + * and if non-**NULL**, released via **bpf_sk_release**\ (). + * + * The *ctx* should point to the context of the program, such as + * the skb or socket (depending on the hook in use). This is used + * to determine the base network namespace for the lookup. + * + * *tuple_size* must be one of: + * + * **sizeof**\ (*tuple*\ **->ipv4**) + * Look for an IPv4 socket. + * **sizeof**\ (*tuple*\ **->ipv6**) + * Look for an IPv6 socket. + * + * If the *netns* is a negative signed 32-bit integer, then the + * socket lookup table in the netns associated with the *ctx* + * will be used. For the TC hooks, this is the netns of the device + * in the skb. For socket hooks, this is the netns of the socket. + * If *netns* is any other signed 32-bit value greater than or + * equal to zero then it specifies the ID of the netns relative to + * the netns associated with the *ctx*. *netns* values beyond the + * range of 32-bit integers are reserved for future use. + * + * All values for *flags* are reserved for future usage, and must + * be left at zero. + * + * This helper is available only if the kernel was compiled with + * **CONFIG_NET** configuration option. + * Return + * Pointer to **struct bpf_sock**, or **NULL** in case of failure. + * For sockets with reuseport option, the **struct bpf_sock** + * result is from *reuse*\ **->socks**\ [] using the hash of the + * tuple. + * + * struct bpf_sock *bpf_sk_lookup_udp(void *ctx, struct bpf_sock_tuple *tuple, u32 tuple_size, u64 netns, u64 flags) + * Description + * Look for UDP socket matching *tuple*, optionally in a child + * network namespace *netns*. The return value must be checked, + * and if non-**NULL**, released via **bpf_sk_release**\ (). + * + * The *ctx* should point to the context of the program, such as + * the skb or socket (depending on the hook in use). This is used + * to determine the base network namespace for the lookup. + * + * *tuple_size* must be one of: + * + * **sizeof**\ (*tuple*\ **->ipv4**) + * Look for an IPv4 socket. + * **sizeof**\ (*tuple*\ **->ipv6**) + * Look for an IPv6 socket. + * + * If the *netns* is a negative signed 32-bit integer, then the + * socket lookup table in the netns associated with the *ctx* + * will be used. For the TC hooks, this is the netns of the device + * in the skb. For socket hooks, this is the netns of the socket. + * If *netns* is any other signed 32-bit value greater than or + * equal to zero then it specifies the ID of the netns relative to + * the netns associated with the *ctx*. *netns* values beyond the + * range of 32-bit integers are reserved for future use. + * + * All values for *flags* are reserved for future usage, and must + * be left at zero. + * + * This helper is available only if the kernel was compiled with + * **CONFIG_NET** configuration option. + * Return + * Pointer to **struct bpf_sock**, or **NULL** in case of failure. + * For sockets with reuseport option, the **struct bpf_sock** + * result is from *reuse*\ **->socks**\ [] using the hash of the + * tuple. + * + * long bpf_sk_release(void *sock) + * Description + * Release the reference held by *sock*. *sock* must be a + * non-**NULL** pointer that was returned from + * **bpf_sk_lookup_xxx**\ (). + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_map_push_elem(struct bpf_map *map, const void *value, u64 flags) + * Description + * Push an element *value* in *map*. *flags* is one of: + * + * **BPF_EXIST** + * If the queue/stack is full, the oldest element is + * removed to make room for this. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_map_pop_elem(struct bpf_map *map, void *value) + * Description + * Pop an element from *map*. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_map_peek_elem(struct bpf_map *map, void *value) + * Description + * Get an element from *map* without removing it. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_msg_push_data(struct sk_msg_buff *msg, u32 start, u32 len, u64 flags) + * Description + * For socket policies, insert *len* bytes into *msg* at offset + * *start*. + * + * If a program of type **BPF_PROG_TYPE_SK_MSG** is run on a + * *msg* it may want to insert metadata or options into the *msg*. + * This can later be read and used by any of the lower layer BPF + * hooks. + * + * This helper may fail if under memory pressure (a malloc + * fails) in these cases BPF programs will get an appropriate + * error and BPF programs will need to handle them. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_msg_pop_data(struct sk_msg_buff *msg, u32 start, u32 len, u64 flags) + * Description + * Will remove *len* bytes from a *msg* starting at byte *start*. + * This may result in **ENOMEM** errors under certain situations if + * an allocation and copy are required due to a full ring buffer. + * However, the helper will try to avoid doing the allocation + * if possible. Other errors can occur if input parameters are + * invalid either due to *start* byte not being valid part of *msg* + * payload and/or *pop* value being to large. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_rc_pointer_rel(void *ctx, s32 rel_x, s32 rel_y) + * Description + * This helper is used in programs implementing IR decoding, to + * report a successfully decoded pointer movement. + * + * The *ctx* should point to the lirc sample as passed into + * the program. + * + * This helper is only available is the kernel was compiled with + * the **CONFIG_BPF_LIRC_MODE2** configuration option set to + * "**y**". + * Return + * 0 + * + * long bpf_spin_lock(struct bpf_spin_lock *lock) + * Description + * Acquire a spinlock represented by the pointer *lock*, which is + * stored as part of a value of a map. Taking the lock allows to + * safely update the rest of the fields in that value. The + * spinlock can (and must) later be released with a call to + * **bpf_spin_unlock**\ (\ *lock*\ ). + * + * Spinlocks in BPF programs come with a number of restrictions + * and constraints: + * + * * **bpf_spin_lock** objects are only allowed inside maps of + * types **BPF_MAP_TYPE_HASH** and **BPF_MAP_TYPE_ARRAY** (this + * list could be extended in the future). + * * BTF description of the map is mandatory. + * * The BPF program can take ONE lock at a time, since taking two + * or more could cause dead locks. + * * Only one **struct bpf_spin_lock** is allowed per map element. + * * When the lock is taken, calls (either BPF to BPF or helpers) + * are not allowed. + * * The **BPF_LD_ABS** and **BPF_LD_IND** instructions are not + * allowed inside a spinlock-ed region. + * * The BPF program MUST call **bpf_spin_unlock**\ () to release + * the lock, on all execution paths, before it returns. + * * The BPF program can access **struct bpf_spin_lock** only via + * the **bpf_spin_lock**\ () and **bpf_spin_unlock**\ () + * helpers. Loading or storing data into the **struct + * bpf_spin_lock** *lock*\ **;** field of a map is not allowed. + * * To use the **bpf_spin_lock**\ () helper, the BTF description + * of the map value must be a struct and have **struct + * bpf_spin_lock** *anyname*\ **;** field at the top level. + * Nested lock inside another struct is not allowed. + * * The **struct bpf_spin_lock** *lock* field in a map value must + * be aligned on a multiple of 4 bytes in that value. + * * Syscall with command **BPF_MAP_LOOKUP_ELEM** does not copy + * the **bpf_spin_lock** field to user space. + * * Syscall with command **BPF_MAP_UPDATE_ELEM**, or update from + * a BPF program, do not update the **bpf_spin_lock** field. + * * **bpf_spin_lock** cannot be on the stack or inside a + * networking packet (it can only be inside of a map values). + * * **bpf_spin_lock** is available to root only. + * * Tracing programs and socket filter programs cannot use + * **bpf_spin_lock**\ () due to insufficient preemption checks + * (but this may change in the future). + * * **bpf_spin_lock** is not allowed in inner maps of map-in-map. + * Return + * 0 + * + * long bpf_spin_unlock(struct bpf_spin_lock *lock) + * Description + * Release the *lock* previously locked by a call to + * **bpf_spin_lock**\ (\ *lock*\ ). + * Return + * 0 + * + * struct bpf_sock *bpf_sk_fullsock(struct bpf_sock *sk) + * Description + * This helper gets a **struct bpf_sock** pointer such + * that all the fields in this **bpf_sock** can be accessed. + * Return + * A **struct bpf_sock** pointer on success, or **NULL** in + * case of failure. + * + * struct bpf_tcp_sock *bpf_tcp_sock(struct bpf_sock *sk) + * Description + * This helper gets a **struct bpf_tcp_sock** pointer from a + * **struct bpf_sock** pointer. + * Return + * A **struct bpf_tcp_sock** pointer on success, or **NULL** in + * case of failure. + * + * long bpf_skb_ecn_set_ce(struct sk_buff *skb) + * Description + * Set ECN (Explicit Congestion Notification) field of IP header + * to **CE** (Congestion Encountered) if current value is **ECT** + * (ECN Capable Transport). Otherwise, do nothing. Works with IPv6 + * and IPv4. + * Return + * 1 if the **CE** flag is set (either by the current helper call + * or because it was already present), 0 if it is not set. + * + * struct bpf_sock *bpf_get_listener_sock(struct bpf_sock *sk) + * Description + * Return a **struct bpf_sock** pointer in **TCP_LISTEN** state. + * **bpf_sk_release**\ () is unnecessary and not allowed. + * Return + * A **struct bpf_sock** pointer on success, or **NULL** in + * case of failure. + * + * struct bpf_sock *bpf_skc_lookup_tcp(void *ctx, struct bpf_sock_tuple *tuple, u32 tuple_size, u64 netns, u64 flags) + * Description + * Look for TCP socket matching *tuple*, optionally in a child + * network namespace *netns*. The return value must be checked, + * and if non-**NULL**, released via **bpf_sk_release**\ (). + * + * This function is identical to **bpf_sk_lookup_tcp**\ (), except + * that it also returns timewait or request sockets. Use + * **bpf_sk_fullsock**\ () or **bpf_tcp_sock**\ () to access the + * full structure. + * + * This helper is available only if the kernel was compiled with + * **CONFIG_NET** configuration option. + * Return + * Pointer to **struct bpf_sock**, or **NULL** in case of failure. + * For sockets with reuseport option, the **struct bpf_sock** + * result is from *reuse*\ **->socks**\ [] using the hash of the + * tuple. + * + * long bpf_tcp_check_syncookie(void *sk, void *iph, u32 iph_len, struct tcphdr *th, u32 th_len) + * Description + * Check whether *iph* and *th* contain a valid SYN cookie ACK for + * the listening socket in *sk*. + * + * *iph* points to the start of the IPv4 or IPv6 header, while + * *iph_len* contains **sizeof**\ (**struct iphdr**) or + * **sizeof**\ (**struct ipv6hdr**). + * + * *th* points to the start of the TCP header, while *th_len* + * contains the length of the TCP header (at least + * **sizeof**\ (**struct tcphdr**)). + * Return + * 0 if *iph* and *th* are a valid SYN cookie ACK, or a negative + * error otherwise. + * + * long bpf_sysctl_get_name(struct bpf_sysctl *ctx, char *buf, size_t buf_len, u64 flags) + * Description + * Get name of sysctl in /proc/sys/ and copy it into provided by + * program buffer *buf* of size *buf_len*. + * + * The buffer is always NUL terminated, unless it's zero-sized. + * + * If *flags* is zero, full name (e.g. "net/ipv4/tcp_mem") is + * copied. Use **BPF_F_SYSCTL_BASE_NAME** flag to copy base name + * only (e.g. "tcp_mem"). + * Return + * Number of character copied (not including the trailing NUL). + * + * **-E2BIG** if the buffer wasn't big enough (*buf* will contain + * truncated name in this case). + * + * long bpf_sysctl_get_current_value(struct bpf_sysctl *ctx, char *buf, size_t buf_len) + * Description + * Get current value of sysctl as it is presented in /proc/sys + * (incl. newline, etc), and copy it as a string into provided + * by program buffer *buf* of size *buf_len*. + * + * The whole value is copied, no matter what file position user + * space issued e.g. sys_read at. + * + * The buffer is always NUL terminated, unless it's zero-sized. + * Return + * Number of character copied (not including the trailing NUL). + * + * **-E2BIG** if the buffer wasn't big enough (*buf* will contain + * truncated name in this case). + * + * **-EINVAL** if current value was unavailable, e.g. because + * sysctl is uninitialized and read returns -EIO for it. + * + * long bpf_sysctl_get_new_value(struct bpf_sysctl *ctx, char *buf, size_t buf_len) + * Description + * Get new value being written by user space to sysctl (before + * the actual write happens) and copy it as a string into + * provided by program buffer *buf* of size *buf_len*. + * + * User space may write new value at file position > 0. + * + * The buffer is always NUL terminated, unless it's zero-sized. + * Return + * Number of character copied (not including the trailing NUL). + * + * **-E2BIG** if the buffer wasn't big enough (*buf* will contain + * truncated name in this case). + * + * **-EINVAL** if sysctl is being read. + * + * long bpf_sysctl_set_new_value(struct bpf_sysctl *ctx, const char *buf, size_t buf_len) + * Description + * Override new value being written by user space to sysctl with + * value provided by program in buffer *buf* of size *buf_len*. + * + * *buf* should contain a string in same form as provided by user + * space on sysctl write. + * + * User space may write new value at file position > 0. To override + * the whole sysctl value file position should be set to zero. + * Return + * 0 on success. + * + * **-E2BIG** if the *buf_len* is too big. + * + * **-EINVAL** if sysctl is being read. + * + * long bpf_strtol(const char *buf, size_t buf_len, u64 flags, long *res) + * Description + * Convert the initial part of the string from buffer *buf* of + * size *buf_len* to a long integer according to the given base + * and save the result in *res*. + * + * The string may begin with an arbitrary amount of white space + * (as determined by **isspace**\ (3)) followed by a single + * optional '**-**' sign. + * + * Five least significant bits of *flags* encode base, other bits + * are currently unused. + * + * Base must be either 8, 10, 16 or 0 to detect it automatically + * similar to user space **strtol**\ (3). + * Return + * Number of characters consumed on success. Must be positive but + * no more than *buf_len*. + * + * **-EINVAL** if no valid digits were found or unsupported base + * was provided. + * + * **-ERANGE** if resulting value was out of range. + * + * long bpf_strtoul(const char *buf, size_t buf_len, u64 flags, unsigned long *res) + * Description + * Convert the initial part of the string from buffer *buf* of + * size *buf_len* to an unsigned long integer according to the + * given base and save the result in *res*. + * + * The string may begin with an arbitrary amount of white space + * (as determined by **isspace**\ (3)). + * + * Five least significant bits of *flags* encode base, other bits + * are currently unused. + * + * Base must be either 8, 10, 16 or 0 to detect it automatically + * similar to user space **strtoul**\ (3). + * Return + * Number of characters consumed on success. Must be positive but + * no more than *buf_len*. + * + * **-EINVAL** if no valid digits were found or unsupported base + * was provided. + * + * **-ERANGE** if resulting value was out of range. + * + * void *bpf_sk_storage_get(struct bpf_map *map, void *sk, void *value, u64 flags) + * Description + * Get a bpf-local-storage from a *sk*. + * + * Logically, it could be thought of getting the value from + * a *map* with *sk* as the **key**. From this + * perspective, the usage is not much different from + * **bpf_map_lookup_elem**\ (*map*, **&**\ *sk*) except this + * helper enforces the key must be a full socket and the map must + * be a **BPF_MAP_TYPE_SK_STORAGE** also. + * + * Underneath, the value is stored locally at *sk* instead of + * the *map*. The *map* is used as the bpf-local-storage + * "type". The bpf-local-storage "type" (i.e. the *map*) is + * searched against all bpf-local-storages residing at *sk*. + * + * *sk* is a kernel **struct sock** pointer for LSM program. + * *sk* is a **struct bpf_sock** pointer for other program types. + * + * An optional *flags* (**BPF_SK_STORAGE_GET_F_CREATE**) can be + * used such that a new bpf-local-storage will be + * created if one does not exist. *value* can be used + * together with **BPF_SK_STORAGE_GET_F_CREATE** to specify + * the initial value of a bpf-local-storage. If *value* is + * **NULL**, the new bpf-local-storage will be zero initialized. + * Return + * A bpf-local-storage pointer is returned on success. + * + * **NULL** if not found or there was an error in adding + * a new bpf-local-storage. + * + * long bpf_sk_storage_delete(struct bpf_map *map, void *sk) + * Description + * Delete a bpf-local-storage from a *sk*. + * Return + * 0 on success. + * + * **-ENOENT** if the bpf-local-storage cannot be found. + * **-EINVAL** if sk is not a fullsock (e.g. a request_sock). + * + * long bpf_send_signal(u32 sig) + * Description + * Send signal *sig* to the process of the current task. + * The signal may be delivered to any of this process's threads. + * Return + * 0 on success or successfully queued. + * + * **-EBUSY** if work queue under nmi is full. + * + * **-EINVAL** if *sig* is invalid. + * + * **-EPERM** if no permission to send the *sig*. + * + * **-EAGAIN** if bpf program can try again. + * + * s64 bpf_tcp_gen_syncookie(void *sk, void *iph, u32 iph_len, struct tcphdr *th, u32 th_len) + * Description + * Try to issue a SYN cookie for the packet with corresponding + * IP/TCP headers, *iph* and *th*, on the listening socket in *sk*. + * + * *iph* points to the start of the IPv4 or IPv6 header, while + * *iph_len* contains **sizeof**\ (**struct iphdr**) or + * **sizeof**\ (**struct ipv6hdr**). + * + * *th* points to the start of the TCP header, while *th_len* + * contains the length of the TCP header with options (at least + * **sizeof**\ (**struct tcphdr**)). + * Return + * On success, lower 32 bits hold the generated SYN cookie in + * followed by 16 bits which hold the MSS value for that cookie, + * and the top 16 bits are unused. + * + * On failure, the returned value is one of the following: + * + * **-EINVAL** SYN cookie cannot be issued due to error + * + * **-ENOENT** SYN cookie should not be issued (no SYN flood) + * + * **-EOPNOTSUPP** kernel configuration does not enable SYN cookies + * + * **-EPROTONOSUPPORT** IP packet version is not 4 or 6 + * + * long bpf_skb_output(void *ctx, struct bpf_map *map, u64 flags, void *data, u64 size) + * Description + * Write raw *data* blob into a special BPF perf event held by + * *map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. This perf + * event must have the following attributes: **PERF_SAMPLE_RAW** + * as **sample_type**, **PERF_TYPE_SOFTWARE** as **type**, and + * **PERF_COUNT_SW_BPF_OUTPUT** as **config**. + * + * The *flags* are used to indicate the index in *map* for which + * the value must be put, masked with **BPF_F_INDEX_MASK**. + * Alternatively, *flags* can be set to **BPF_F_CURRENT_CPU** + * to indicate that the index of the current CPU core should be + * used. + * + * The value to write, of *size*, is passed through eBPF stack and + * pointed by *data*. + * + * *ctx* is a pointer to in-kernel struct sk_buff. + * + * This helper is similar to **bpf_perf_event_output**\ () but + * restricted to raw_tracepoint bpf programs. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_probe_read_user(void *dst, u32 size, const void *unsafe_ptr) + * Description + * Safely attempt to read *size* bytes from user space address + * *unsafe_ptr* and store the data in *dst*. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_probe_read_kernel(void *dst, u32 size, const void *unsafe_ptr) + * Description + * Safely attempt to read *size* bytes from kernel space address + * *unsafe_ptr* and store the data in *dst*. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_probe_read_user_str(void *dst, u32 size, const void *unsafe_ptr) + * Description + * Copy a NUL terminated string from an unsafe user address + * *unsafe_ptr* to *dst*. The *size* should include the + * terminating NUL byte. In case the string length is smaller than + * *size*, the target is not padded with further NUL bytes. If the + * string length is larger than *size*, just *size*-1 bytes are + * copied and the last byte is set to NUL. + * + * On success, returns the number of bytes that were written, + * including the terminal NUL. This makes this helper useful in + * tracing programs for reading strings, and more importantly to + * get its length at runtime. See the following snippet: + * + * :: + * + * SEC("kprobe/sys_open") + * void bpf_sys_open(struct pt_regs *ctx) + * { + * char buf[PATHLEN]; // PATHLEN is defined to 256 + * int res = bpf_probe_read_user_str(buf, sizeof(buf), + * ctx->di); + * + * // Consume buf, for example push it to + * // userspace via bpf_perf_event_output(); we + * // can use res (the string length) as event + * // size, after checking its boundaries. + * } + * + * In comparison, using **bpf_probe_read_user**\ () helper here + * instead to read the string would require to estimate the length + * at compile time, and would often result in copying more memory + * than necessary. + * + * Another useful use case is when parsing individual process + * arguments or individual environment variables navigating + * *current*\ **->mm->arg_start** and *current*\ + * **->mm->env_start**: using this helper and the return value, + * one can quickly iterate at the right offset of the memory area. + * Return + * On success, the strictly positive length of the output string, + * including the trailing NUL character. On error, a negative + * value. + * + * long bpf_probe_read_kernel_str(void *dst, u32 size, const void *unsafe_ptr) + * Description + * Copy a NUL terminated string from an unsafe kernel address *unsafe_ptr* + * to *dst*. Same semantics as with **bpf_probe_read_user_str**\ () apply. + * Return + * On success, the strictly positive length of the string, including + * the trailing NUL character. On error, a negative value. + * + * long bpf_tcp_send_ack(void *tp, u32 rcv_nxt) + * Description + * Send out a tcp-ack. *tp* is the in-kernel struct **tcp_sock**. + * *rcv_nxt* is the ack_seq to be sent out. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_send_signal_thread(u32 sig) + * Description + * Send signal *sig* to the thread corresponding to the current task. + * Return + * 0 on success or successfully queued. + * + * **-EBUSY** if work queue under nmi is full. + * + * **-EINVAL** if *sig* is invalid. + * + * **-EPERM** if no permission to send the *sig*. + * + * **-EAGAIN** if bpf program can try again. + * + * u64 bpf_jiffies64(void) + * Description + * Obtain the 64bit jiffies + * Return + * The 64 bit jiffies + * + * long bpf_read_branch_records(struct bpf_perf_event_data *ctx, void *buf, u32 size, u64 flags) + * Description + * For an eBPF program attached to a perf event, retrieve the + * branch records (**struct perf_branch_entry**) associated to *ctx* + * and store it in the buffer pointed by *buf* up to size + * *size* bytes. + * Return + * On success, number of bytes written to *buf*. On error, a + * negative value. + * + * The *flags* can be set to **BPF_F_GET_BRANCH_RECORDS_SIZE** to + * instead return the number of bytes required to store all the + * branch entries. If this flag is set, *buf* may be NULL. + * + * **-EINVAL** if arguments invalid or **size** not a multiple + * of **sizeof**\ (**struct perf_branch_entry**\ ). + * + * **-ENOENT** if architecture does not support branch records. + * + * long bpf_get_ns_current_pid_tgid(u64 dev, u64 ino, struct bpf_pidns_info *nsdata, u32 size) + * Description + * Returns 0 on success, values for *pid* and *tgid* as seen from the current + * *namespace* will be returned in *nsdata*. + * Return + * 0 on success, or one of the following in case of failure: + * + * **-EINVAL** if dev and inum supplied don't match dev_t and inode number + * with nsfs of current task, or if dev conversion to dev_t lost high bits. + * + * **-ENOENT** if pidns does not exists for the current task. + * + * long bpf_xdp_output(void *ctx, struct bpf_map *map, u64 flags, void *data, u64 size) + * Description + * Write raw *data* blob into a special BPF perf event held by + * *map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. This perf + * event must have the following attributes: **PERF_SAMPLE_RAW** + * as **sample_type**, **PERF_TYPE_SOFTWARE** as **type**, and + * **PERF_COUNT_SW_BPF_OUTPUT** as **config**. + * + * The *flags* are used to indicate the index in *map* for which + * the value must be put, masked with **BPF_F_INDEX_MASK**. + * Alternatively, *flags* can be set to **BPF_F_CURRENT_CPU** + * to indicate that the index of the current CPU core should be + * used. + * + * The value to write, of *size*, is passed through eBPF stack and + * pointed by *data*. + * + * *ctx* is a pointer to in-kernel struct xdp_buff. + * + * This helper is similar to **bpf_perf_eventoutput**\ () but + * restricted to raw_tracepoint bpf programs. + * Return + * 0 on success, or a negative error in case of failure. + * + * u64 bpf_get_netns_cookie(void *ctx) + * Description + * Retrieve the cookie (generated by the kernel) of the network + * namespace the input *ctx* is associated with. The network + * namespace cookie remains stable for its lifetime and provides + * a global identifier that can be assumed unique. If *ctx* is + * NULL, then the helper returns the cookie for the initial + * network namespace. The cookie itself is very similar to that + * of **bpf_get_socket_cookie**\ () helper, but for network + * namespaces instead of sockets. + * Return + * A 8-byte long opaque number. + * + * u64 bpf_get_current_ancestor_cgroup_id(int ancestor_level) + * Description + * Return id of cgroup v2 that is ancestor of the cgroup associated + * with the current task at the *ancestor_level*. The root cgroup + * is at *ancestor_level* zero and each step down the hierarchy + * increments the level. If *ancestor_level* == level of cgroup + * associated with the current task, then return value will be the + * same as that of **bpf_get_current_cgroup_id**\ (). + * + * The helper is useful to implement policies based on cgroups + * that are upper in hierarchy than immediate cgroup associated + * with the current task. + * + * The format of returned id and helper limitations are same as in + * **bpf_get_current_cgroup_id**\ (). + * Return + * The id is returned or 0 in case the id could not be retrieved. + * + * long bpf_sk_assign(struct sk_buff *skb, void *sk, u64 flags) + * Description + * Helper is overloaded depending on BPF program type. This + * description applies to **BPF_PROG_TYPE_SCHED_CLS** and + * **BPF_PROG_TYPE_SCHED_ACT** programs. + * + * Assign the *sk* to the *skb*. When combined with appropriate + * routing configuration to receive the packet towards the socket, + * will cause *skb* to be delivered to the specified socket. + * Subsequent redirection of *skb* via **bpf_redirect**\ (), + * **bpf_clone_redirect**\ () or other methods outside of BPF may + * interfere with successful delivery to the socket. + * + * This operation is only valid from TC ingress path. + * + * The *flags* argument must be zero. + * Return + * 0 on success, or a negative error in case of failure: + * + * **-EINVAL** if specified *flags* are not supported. + * + * **-ENOENT** if the socket is unavailable for assignment. + * + * **-ENETUNREACH** if the socket is unreachable (wrong netns). + * + * **-EOPNOTSUPP** if the operation is not supported, for example + * a call from outside of TC ingress. + * + * long bpf_sk_assign(struct bpf_sk_lookup *ctx, struct bpf_sock *sk, u64 flags) + * Description + * Helper is overloaded depending on BPF program type. This + * description applies to **BPF_PROG_TYPE_SK_LOOKUP** programs. + * + * Select the *sk* as a result of a socket lookup. + * + * For the operation to succeed passed socket must be compatible + * with the packet description provided by the *ctx* object. + * + * L4 protocol (**IPPROTO_TCP** or **IPPROTO_UDP**) must + * be an exact match. While IP family (**AF_INET** or + * **AF_INET6**) must be compatible, that is IPv6 sockets + * that are not v6-only can be selected for IPv4 packets. + * + * Only TCP listeners and UDP unconnected sockets can be + * selected. *sk* can also be NULL to reset any previous + * selection. + * + * *flags* argument can combination of following values: + * + * * **BPF_SK_LOOKUP_F_REPLACE** to override the previous + * socket selection, potentially done by a BPF program + * that ran before us. + * + * * **BPF_SK_LOOKUP_F_NO_REUSEPORT** to skip + * load-balancing within reuseport group for the socket + * being selected. + * + * On success *ctx->sk* will point to the selected socket. + * + * Return + * 0 on success, or a negative errno in case of failure. + * + * * **-EAFNOSUPPORT** if socket family (*sk->family*) is + * not compatible with packet family (*ctx->family*). + * + * * **-EEXIST** if socket has been already selected, + * potentially by another program, and + * **BPF_SK_LOOKUP_F_REPLACE** flag was not specified. + * + * * **-EINVAL** if unsupported flags were specified. + * + * * **-EPROTOTYPE** if socket L4 protocol + * (*sk->protocol*) doesn't match packet protocol + * (*ctx->protocol*). + * + * * **-ESOCKTNOSUPPORT** if socket is not in allowed + * state (TCP listening or UDP unconnected). + * + * u64 bpf_ktime_get_boot_ns(void) + * Description + * Return the time elapsed since system boot, in nanoseconds. + * Does include the time the system was suspended. + * See: **clock_gettime**\ (**CLOCK_BOOTTIME**) + * Return + * Current *ktime*. + * + * long bpf_seq_printf(struct seq_file *m, const char *fmt, u32 fmt_size, const void *data, u32 data_len) + * Description + * **bpf_seq_printf**\ () uses seq_file **seq_printf**\ () to print + * out the format string. + * The *m* represents the seq_file. The *fmt* and *fmt_size* are for + * the format string itself. The *data* and *data_len* are format string + * arguments. The *data* are a **u64** array and corresponding format string + * values are stored in the array. For strings and pointers where pointees + * are accessed, only the pointer values are stored in the *data* array. + * The *data_len* is the size of *data* in bytes - must be a multiple of 8. + * + * Formats **%s**, **%p{i,I}{4,6}** requires to read kernel memory. + * Reading kernel memory may fail due to either invalid address or + * valid address but requiring a major memory fault. If reading kernel memory + * fails, the string for **%s** will be an empty string, and the ip + * address for **%p{i,I}{4,6}** will be 0. Not returning error to + * bpf program is consistent with what **bpf_trace_printk**\ () does for now. + * Return + * 0 on success, or a negative error in case of failure: + * + * **-EBUSY** if per-CPU memory copy buffer is busy, can try again + * by returning 1 from bpf program. + * + * **-EINVAL** if arguments are invalid, or if *fmt* is invalid/unsupported. + * + * **-E2BIG** if *fmt* contains too many format specifiers. + * + * **-EOVERFLOW** if an overflow happened: The same object will be tried again. + * + * long bpf_seq_write(struct seq_file *m, const void *data, u32 len) + * Description + * **bpf_seq_write**\ () uses seq_file **seq_write**\ () to write the data. + * The *m* represents the seq_file. The *data* and *len* represent the + * data to write in bytes. + * Return + * 0 on success, or a negative error in case of failure: + * + * **-EOVERFLOW** if an overflow happened: The same object will be tried again. + * + * u64 bpf_sk_cgroup_id(void *sk) + * Description + * Return the cgroup v2 id of the socket *sk*. + * + * *sk* must be a non-**NULL** pointer to a socket, e.g. one + * returned from **bpf_sk_lookup_xxx**\ (), + * **bpf_sk_fullsock**\ (), etc. The format of returned id is + * same as in **bpf_skb_cgroup_id**\ (). + * + * This helper is available only if the kernel was compiled with + * the **CONFIG_SOCK_CGROUP_DATA** configuration option. + * Return + * The id is returned or 0 in case the id could not be retrieved. + * + * u64 bpf_sk_ancestor_cgroup_id(void *sk, int ancestor_level) + * Description + * Return id of cgroup v2 that is ancestor of cgroup associated + * with the *sk* at the *ancestor_level*. The root cgroup is at + * *ancestor_level* zero and each step down the hierarchy + * increments the level. If *ancestor_level* == level of cgroup + * associated with *sk*, then return value will be same as that + * of **bpf_sk_cgroup_id**\ (). + * + * The helper is useful to implement policies based on cgroups + * that are upper in hierarchy than immediate cgroup associated + * with *sk*. + * + * The format of returned id and helper limitations are same as in + * **bpf_sk_cgroup_id**\ (). + * Return + * The id is returned or 0 in case the id could not be retrieved. + * + * long bpf_ringbuf_output(void *ringbuf, void *data, u64 size, u64 flags) + * Description + * Copy *size* bytes from *data* into a ring buffer *ringbuf*. + * If **BPF_RB_NO_WAKEUP** is specified in *flags*, no notification + * of new data availability is sent. + * If **BPF_RB_FORCE_WAKEUP** is specified in *flags*, notification + * of new data availability is sent unconditionally. + * If **0** is specified in *flags*, an adaptive notification + * of new data availability is sent. + * + * An adaptive notification is a notification sent whenever the user-space + * process has caught up and consumed all available payloads. In case the user-space + * process is still processing a previous payload, then no notification is needed + * as it will process the newly added payload automatically. + * Return + * 0 on success, or a negative error in case of failure. + * + * void *bpf_ringbuf_reserve(void *ringbuf, u64 size, u64 flags) + * Description + * Reserve *size* bytes of payload in a ring buffer *ringbuf*. + * *flags* must be 0. + * Return + * Valid pointer with *size* bytes of memory available; NULL, + * otherwise. + * + * void bpf_ringbuf_submit(void *data, u64 flags) + * Description + * Submit reserved ring buffer sample, pointed to by *data*. + * If **BPF_RB_NO_WAKEUP** is specified in *flags*, no notification + * of new data availability is sent. + * If **BPF_RB_FORCE_WAKEUP** is specified in *flags*, notification + * of new data availability is sent unconditionally. + * If **0** is specified in *flags*, an adaptive notification + * of new data availability is sent. + * + * See 'bpf_ringbuf_output()' for the definition of adaptive notification. + * Return + * Nothing. Always succeeds. + * + * void bpf_ringbuf_discard(void *data, u64 flags) + * Description + * Discard reserved ring buffer sample, pointed to by *data*. + * If **BPF_RB_NO_WAKEUP** is specified in *flags*, no notification + * of new data availability is sent. + * If **BPF_RB_FORCE_WAKEUP** is specified in *flags*, notification + * of new data availability is sent unconditionally. + * If **0** is specified in *flags*, an adaptive notification + * of new data availability is sent. + * + * See 'bpf_ringbuf_output()' for the definition of adaptive notification. + * Return + * Nothing. Always succeeds. + * + * u64 bpf_ringbuf_query(void *ringbuf, u64 flags) + * Description + * Query various characteristics of provided ring buffer. What + * exactly is queries is determined by *flags*: + * + * * **BPF_RB_AVAIL_DATA**: Amount of data not yet consumed. + * * **BPF_RB_RING_SIZE**: The size of ring buffer. + * * **BPF_RB_CONS_POS**: Consumer position (can wrap around). + * * **BPF_RB_PROD_POS**: Producer(s) position (can wrap around). + * + * Data returned is just a momentary snapshot of actual values + * and could be inaccurate, so this facility should be used to + * power heuristics and for reporting, not to make 100% correct + * calculation. + * Return + * Requested value, or 0, if *flags* are not recognized. + * + * long bpf_csum_level(struct sk_buff *skb, u64 level) + * Description + * Change the skbs checksum level by one layer up or down, or + * reset it entirely to none in order to have the stack perform + * checksum validation. The level is applicable to the following + * protocols: TCP, UDP, GRE, SCTP, FCOE. For example, a decap of + * | ETH | IP | UDP | GUE | IP | TCP | into | ETH | IP | TCP | + * through **bpf_skb_adjust_room**\ () helper with passing in + * **BPF_F_ADJ_ROOM_NO_CSUM_RESET** flag would require one call + * to **bpf_csum_level**\ () with **BPF_CSUM_LEVEL_DEC** since + * the UDP header is removed. Similarly, an encap of the latter + * into the former could be accompanied by a helper call to + * **bpf_csum_level**\ () with **BPF_CSUM_LEVEL_INC** if the + * skb is still intended to be processed in higher layers of the + * stack instead of just egressing at tc. + * + * There are three supported level settings at this time: + * + * * **BPF_CSUM_LEVEL_INC**: Increases skb->csum_level for skbs + * with CHECKSUM_UNNECESSARY. + * * **BPF_CSUM_LEVEL_DEC**: Decreases skb->csum_level for skbs + * with CHECKSUM_UNNECESSARY. + * * **BPF_CSUM_LEVEL_RESET**: Resets skb->csum_level to 0 and + * sets CHECKSUM_NONE to force checksum validation by the stack. + * * **BPF_CSUM_LEVEL_QUERY**: No-op, returns the current + * skb->csum_level. + * Return + * 0 on success, or a negative error in case of failure. In the + * case of **BPF_CSUM_LEVEL_QUERY**, the current skb->csum_level + * is returned or the error code -EACCES in case the skb is not + * subject to CHECKSUM_UNNECESSARY. + * + * struct tcp6_sock *bpf_skc_to_tcp6_sock(void *sk) + * Description + * Dynamically cast a *sk* pointer to a *tcp6_sock* pointer. + * Return + * *sk* if casting is valid, or **NULL** otherwise. + * + * struct tcp_sock *bpf_skc_to_tcp_sock(void *sk) + * Description + * Dynamically cast a *sk* pointer to a *tcp_sock* pointer. + * Return + * *sk* if casting is valid, or **NULL** otherwise. + * + * struct tcp_timewait_sock *bpf_skc_to_tcp_timewait_sock(void *sk) + * Description + * Dynamically cast a *sk* pointer to a *tcp_timewait_sock* pointer. + * Return + * *sk* if casting is valid, or **NULL** otherwise. + * + * struct tcp_request_sock *bpf_skc_to_tcp_request_sock(void *sk) + * Description + * Dynamically cast a *sk* pointer to a *tcp_request_sock* pointer. + * Return + * *sk* if casting is valid, or **NULL** otherwise. + * + * struct udp6_sock *bpf_skc_to_udp6_sock(void *sk) + * Description + * Dynamically cast a *sk* pointer to a *udp6_sock* pointer. + * Return + * *sk* if casting is valid, or **NULL** otherwise. + * + * long bpf_get_task_stack(struct task_struct *task, void *buf, u32 size, u64 flags) + * Description + * Return a user or a kernel stack in bpf program provided buffer. + * Note: the user stack will only be populated if the *task* is + * the current task; all other tasks will return -EOPNOTSUPP. + * To achieve this, the helper needs *task*, which is a valid + * pointer to **struct task_struct**. To store the stacktrace, the + * bpf program provides *buf* with a nonnegative *size*. + * + * The last argument, *flags*, holds the number of stack frames to + * skip (from 0 to 255), masked with + * **BPF_F_SKIP_FIELD_MASK**. The next bits can be used to set + * the following flags: + * + * **BPF_F_USER_STACK** + * Collect a user space stack instead of a kernel stack. + * The *task* must be the current task. + * **BPF_F_USER_BUILD_ID** + * Collect buildid+offset instead of ips for user stack, + * only valid if **BPF_F_USER_STACK** is also specified. + * + * **bpf_get_task_stack**\ () can collect up to + * **PERF_MAX_STACK_DEPTH** both kernel and user frames, subject + * to sufficient large buffer size. Note that + * this limit can be controlled with the **sysctl** program, and + * that it should be manually increased in order to profile long + * user stacks (such as stacks for Java programs). To do so, use: + * + * :: + * + * # sysctl kernel.perf_event_max_stack=<new value> + * Return + * The non-negative copied *buf* length equal to or less than + * *size* on success, or a negative error in case of failure. + * + * long bpf_load_hdr_opt(struct bpf_sock_ops *skops, void *searchby_res, u32 len, u64 flags) + * Description + * Load header option. Support reading a particular TCP header + * option for bpf program (**BPF_PROG_TYPE_SOCK_OPS**). + * + * If *flags* is 0, it will search the option from the + * *skops*\ **->skb_data**. The comment in **struct bpf_sock_ops** + * has details on what skb_data contains under different + * *skops*\ **->op**. + * + * The first byte of the *searchby_res* specifies the + * kind that it wants to search. + * + * If the searching kind is an experimental kind + * (i.e. 253 or 254 according to RFC6994). It also + * needs to specify the "magic" which is either + * 2 bytes or 4 bytes. It then also needs to + * specify the size of the magic by using + * the 2nd byte which is "kind-length" of a TCP + * header option and the "kind-length" also + * includes the first 2 bytes "kind" and "kind-length" + * itself as a normal TCP header option also does. + * + * For example, to search experimental kind 254 with + * 2 byte magic 0xeB9F, the searchby_res should be + * [ 254, 4, 0xeB, 0x9F, 0, 0, .... 0 ]. + * + * To search for the standard window scale option (3), + * the *searchby_res* should be [ 3, 0, 0, .... 0 ]. + * Note, kind-length must be 0 for regular option. + * + * Searching for No-Op (0) and End-of-Option-List (1) are + * not supported. + * + * *len* must be at least 2 bytes which is the minimal size + * of a header option. + * + * Supported flags: + * + * * **BPF_LOAD_HDR_OPT_TCP_SYN** to search from the + * saved_syn packet or the just-received syn packet. + * + * Return + * > 0 when found, the header option is copied to *searchby_res*. + * The return value is the total length copied. On failure, a + * negative error code is returned: + * + * **-EINVAL** if a parameter is invalid. + * + * **-ENOMSG** if the option is not found. + * + * **-ENOENT** if no syn packet is available when + * **BPF_LOAD_HDR_OPT_TCP_SYN** is used. + * + * **-ENOSPC** if there is not enough space. Only *len* number of + * bytes are copied. + * + * **-EFAULT** on failure to parse the header options in the + * packet. + * + * **-EPERM** if the helper cannot be used under the current + * *skops*\ **->op**. + * + * long bpf_store_hdr_opt(struct bpf_sock_ops *skops, const void *from, u32 len, u64 flags) + * Description + * Store header option. The data will be copied + * from buffer *from* with length *len* to the TCP header. + * + * The buffer *from* should have the whole option that + * includes the kind, kind-length, and the actual + * option data. The *len* must be at least kind-length + * long. The kind-length does not have to be 4 byte + * aligned. The kernel will take care of the padding + * and setting the 4 bytes aligned value to th->doff. + * + * This helper will check for duplicated option + * by searching the same option in the outgoing skb. + * + * This helper can only be called during + * **BPF_SOCK_OPS_WRITE_HDR_OPT_CB**. + * + * Return + * 0 on success, or negative error in case of failure: + * + * **-EINVAL** If param is invalid. + * + * **-ENOSPC** if there is not enough space in the header. + * Nothing has been written + * + * **-EEXIST** if the option already exists. + * + * **-EFAULT** on failure to parse the existing header options. + * + * **-EPERM** if the helper cannot be used under the current + * *skops*\ **->op**. + * + * long bpf_reserve_hdr_opt(struct bpf_sock_ops *skops, u32 len, u64 flags) + * Description + * Reserve *len* bytes for the bpf header option. The + * space will be used by **bpf_store_hdr_opt**\ () later in + * **BPF_SOCK_OPS_WRITE_HDR_OPT_CB**. + * + * If **bpf_reserve_hdr_opt**\ () is called multiple times, + * the total number of bytes will be reserved. + * + * This helper can only be called during + * **BPF_SOCK_OPS_HDR_OPT_LEN_CB**. + * + * Return + * 0 on success, or negative error in case of failure: + * + * **-EINVAL** if a parameter is invalid. + * + * **-ENOSPC** if there is not enough space in the header. + * + * **-EPERM** if the helper cannot be used under the current + * *skops*\ **->op**. + * + * void *bpf_inode_storage_get(struct bpf_map *map, void *inode, void *value, u64 flags) + * Description + * Get a bpf_local_storage from an *inode*. + * + * Logically, it could be thought of as getting the value from + * a *map* with *inode* as the **key**. From this + * perspective, the usage is not much different from + * **bpf_map_lookup_elem**\ (*map*, **&**\ *inode*) except this + * helper enforces the key must be an inode and the map must also + * be a **BPF_MAP_TYPE_INODE_STORAGE**. + * + * Underneath, the value is stored locally at *inode* instead of + * the *map*. The *map* is used as the bpf-local-storage + * "type". The bpf-local-storage "type" (i.e. the *map*) is + * searched against all bpf_local_storage residing at *inode*. + * + * An optional *flags* (**BPF_LOCAL_STORAGE_GET_F_CREATE**) can be + * used such that a new bpf_local_storage will be + * created if one does not exist. *value* can be used + * together with **BPF_LOCAL_STORAGE_GET_F_CREATE** to specify + * the initial value of a bpf_local_storage. If *value* is + * **NULL**, the new bpf_local_storage will be zero initialized. + * Return + * A bpf_local_storage pointer is returned on success. + * + * **NULL** if not found or there was an error in adding + * a new bpf_local_storage. + * + * int bpf_inode_storage_delete(struct bpf_map *map, void *inode) + * Description + * Delete a bpf_local_storage from an *inode*. + * Return + * 0 on success. + * + * **-ENOENT** if the bpf_local_storage cannot be found. + * + * long bpf_d_path(const struct path *path, char *buf, u32 sz) + * Description + * Return full path for given **struct path** object, which + * needs to be the kernel BTF *path* object. The path is + * returned in the provided buffer *buf* of size *sz* and + * is zero terminated. + * + * Return + * On success, the strictly positive length of the string, + * including the trailing NUL character. On error, a negative + * value. + * + * long bpf_copy_from_user(void *dst, u32 size, const void *user_ptr) + * Description + * Read *size* bytes from user space address *user_ptr* and store + * the data in *dst*. This is a wrapper of **copy_from_user**\ (). + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_snprintf_btf(char *str, u32 str_size, struct btf_ptr *ptr, u32 btf_ptr_size, u64 flags) + * Description + * Use BTF to store a string representation of *ptr*->ptr in *str*, + * using *ptr*->type_id. This value should specify the type + * that *ptr*->ptr points to. LLVM __builtin_btf_type_id(type, 1) + * can be used to look up vmlinux BTF type ids. Traversing the + * data structure using BTF, the type information and values are + * stored in the first *str_size* - 1 bytes of *str*. Safe copy of + * the pointer data is carried out to avoid kernel crashes during + * operation. Smaller types can use string space on the stack; + * larger programs can use map data to store the string + * representation. + * + * The string can be subsequently shared with userspace via + * bpf_perf_event_output() or ring buffer interfaces. + * bpf_trace_printk() is to be avoided as it places too small + * a limit on string size to be useful. + * + * *flags* is a combination of + * + * **BTF_F_COMPACT** + * no formatting around type information + * **BTF_F_NONAME** + * no struct/union member names/types + * **BTF_F_PTR_RAW** + * show raw (unobfuscated) pointer values; + * equivalent to printk specifier %px. + * **BTF_F_ZERO** + * show zero-valued struct/union members; they + * are not displayed by default + * + * Return + * The number of bytes that were written (or would have been + * written if output had to be truncated due to string size), + * or a negative error in cases of failure. + * + * long bpf_seq_printf_btf(struct seq_file *m, struct btf_ptr *ptr, u32 ptr_size, u64 flags) + * Description + * Use BTF to write to seq_write a string representation of + * *ptr*->ptr, using *ptr*->type_id as per bpf_snprintf_btf(). + * *flags* are identical to those used for bpf_snprintf_btf. + * Return + * 0 on success or a negative error in case of failure. + * + * u64 bpf_skb_cgroup_classid(struct sk_buff *skb) + * Description + * See **bpf_get_cgroup_classid**\ () for the main description. + * This helper differs from **bpf_get_cgroup_classid**\ () in that + * the cgroup v1 net_cls class is retrieved only from the *skb*'s + * associated socket instead of the current process. + * Return + * The id is returned or 0 in case the id could not be retrieved. + * + * long bpf_redirect_neigh(u32 ifindex, struct bpf_redir_neigh *params, int plen, u64 flags) + * Description + * Redirect the packet to another net device of index *ifindex* + * and fill in L2 addresses from neighboring subsystem. This helper + * is somewhat similar to **bpf_redirect**\ (), except that it + * populates L2 addresses as well, meaning, internally, the helper + * relies on the neighbor lookup for the L2 address of the nexthop. + * + * The helper will perform a FIB lookup based on the skb's + * networking header to get the address of the next hop, unless + * this is supplied by the caller in the *params* argument. The + * *plen* argument indicates the len of *params* and should be set + * to 0 if *params* is NULL. + * + * The *flags* argument is reserved and must be 0. The helper is + * currently only supported for tc BPF program types, and enabled + * for IPv4 and IPv6 protocols. + * Return + * The helper returns **TC_ACT_REDIRECT** on success or + * **TC_ACT_SHOT** on error. + * + * void *bpf_per_cpu_ptr(const void *percpu_ptr, u32 cpu) + * Description + * Take a pointer to a percpu ksym, *percpu_ptr*, and return a + * pointer to the percpu kernel variable on *cpu*. A ksym is an + * extern variable decorated with '__ksym'. For ksym, there is a + * global var (either static or global) defined of the same name + * in the kernel. The ksym is percpu if the global var is percpu. + * The returned pointer points to the global percpu var on *cpu*. + * + * bpf_per_cpu_ptr() has the same semantic as per_cpu_ptr() in the + * kernel, except that bpf_per_cpu_ptr() may return NULL. This + * happens if *cpu* is larger than nr_cpu_ids. The caller of + * bpf_per_cpu_ptr() must check the returned value. + * Return + * A pointer pointing to the kernel percpu variable on *cpu*, or + * NULL, if *cpu* is invalid. + * + * void *bpf_this_cpu_ptr(const void *percpu_ptr) + * Description + * Take a pointer to a percpu ksym, *percpu_ptr*, and return a + * pointer to the percpu kernel variable on this cpu. See the + * description of 'ksym' in **bpf_per_cpu_ptr**\ (). + * + * bpf_this_cpu_ptr() has the same semantic as this_cpu_ptr() in + * the kernel. Different from **bpf_per_cpu_ptr**\ (), it would + * never return NULL. + * Return + * A pointer pointing to the kernel percpu variable on this cpu. + * + * long bpf_redirect_peer(u32 ifindex, u64 flags) + * Description + * Redirect the packet to another net device of index *ifindex*. + * This helper is somewhat similar to **bpf_redirect**\ (), except + * that the redirection happens to the *ifindex*' peer device and + * the netns switch takes place from ingress to ingress without + * going through the CPU's backlog queue. + * + * *skb*\ **->mark** and *skb*\ **->tstamp** are not cleared during + * the netns switch. + * + * The *flags* argument is reserved and must be 0. The helper is + * currently only supported for tc BPF program types at the + * ingress hook and for veth and netkit target device types. The + * peer device must reside in a different network namespace. + * Return + * The helper returns **TC_ACT_REDIRECT** on success or + * **TC_ACT_SHOT** on error. + * + * void *bpf_task_storage_get(struct bpf_map *map, struct task_struct *task, void *value, u64 flags) + * Description + * Get a bpf_local_storage from the *task*. + * + * Logically, it could be thought of as getting the value from + * a *map* with *task* as the **key**. From this + * perspective, the usage is not much different from + * **bpf_map_lookup_elem**\ (*map*, **&**\ *task*) except this + * helper enforces the key must be a task_struct and the map must also + * be a **BPF_MAP_TYPE_TASK_STORAGE**. + * + * Underneath, the value is stored locally at *task* instead of + * the *map*. The *map* is used as the bpf-local-storage + * "type". The bpf-local-storage "type" (i.e. the *map*) is + * searched against all bpf_local_storage residing at *task*. + * + * An optional *flags* (**BPF_LOCAL_STORAGE_GET_F_CREATE**) can be + * used such that a new bpf_local_storage will be + * created if one does not exist. *value* can be used + * together with **BPF_LOCAL_STORAGE_GET_F_CREATE** to specify + * the initial value of a bpf_local_storage. If *value* is + * **NULL**, the new bpf_local_storage will be zero initialized. + * Return + * A bpf_local_storage pointer is returned on success. + * + * **NULL** if not found or there was an error in adding + * a new bpf_local_storage. + * + * long bpf_task_storage_delete(struct bpf_map *map, struct task_struct *task) + * Description + * Delete a bpf_local_storage from a *task*. + * Return + * 0 on success. + * + * **-ENOENT** if the bpf_local_storage cannot be found. + * + * struct task_struct *bpf_get_current_task_btf(void) + * Description + * Return a BTF pointer to the "current" task. + * This pointer can also be used in helpers that accept an + * *ARG_PTR_TO_BTF_ID* of type *task_struct*. + * Return + * Pointer to the current task. + * + * long bpf_bprm_opts_set(struct linux_binprm *bprm, u64 flags) + * Description + * Set or clear certain options on *bprm*: + * + * **BPF_F_BPRM_SECUREEXEC** Set the secureexec bit + * which sets the **AT_SECURE** auxv for glibc. The bit + * is cleared if the flag is not specified. + * Return + * **-EINVAL** if invalid *flags* are passed, zero otherwise. + * + * u64 bpf_ktime_get_coarse_ns(void) + * Description + * Return a coarse-grained version of the time elapsed since + * system boot, in nanoseconds. Does not include time the system + * was suspended. + * + * See: **clock_gettime**\ (**CLOCK_MONOTONIC_COARSE**) + * Return + * Current *ktime*. + * + * long bpf_ima_inode_hash(struct inode *inode, void *dst, u32 size) + * Description + * Returns the stored IMA hash of the *inode* (if it's available). + * If the hash is larger than *size*, then only *size* + * bytes will be copied to *dst* + * Return + * The **hash_algo** is returned on success, + * **-EOPNOTSUPP** if IMA is disabled or **-EINVAL** if + * invalid arguments are passed. + * + * struct socket *bpf_sock_from_file(struct file *file) + * Description + * If the given file represents a socket, returns the associated + * socket. + * Return + * A pointer to a struct socket on success or NULL if the file is + * not a socket. + * + * long bpf_check_mtu(void *ctx, u32 ifindex, u32 *mtu_len, s32 len_diff, u64 flags) + * Description + * Check packet size against exceeding MTU of net device (based + * on *ifindex*). This helper will likely be used in combination + * with helpers that adjust/change the packet size. + * + * The argument *len_diff* can be used for querying with a planned + * size change. This allows to check MTU prior to changing packet + * ctx. Providing a *len_diff* adjustment that is larger than the + * actual packet size (resulting in negative packet size) will in + * principle not exceed the MTU, which is why it is not considered + * a failure. Other BPF helpers are needed for performing the + * planned size change; therefore the responsibility for catching + * a negative packet size belongs in those helpers. + * + * Specifying *ifindex* zero means the MTU check is performed + * against the current net device. This is practical if this isn't + * used prior to redirect. + * + * On input *mtu_len* must be a valid pointer, else verifier will + * reject BPF program. If the value *mtu_len* is initialized to + * zero then the ctx packet size is use. When value *mtu_len* is + * provided as input this specify the L3 length that the MTU check + * is done against. Remember XDP and TC length operate at L2, but + * this value is L3 as this correlate to MTU and IP-header tot_len + * values which are L3 (similar behavior as bpf_fib_lookup). + * + * The Linux kernel route table can configure MTUs on a more + * specific per route level, which is not provided by this helper. + * For route level MTU checks use the **bpf_fib_lookup**\ () + * helper. + * + * *ctx* is either **struct xdp_md** for XDP programs or + * **struct sk_buff** for tc cls_act programs. + * + * The *flags* argument can be a combination of one or more of the + * following values: + * + * **BPF_MTU_CHK_SEGS** + * This flag will only works for *ctx* **struct sk_buff**. + * If packet context contains extra packet segment buffers + * (often knows as GSO skb), then MTU check is harder to + * check at this point, because in transmit path it is + * possible for the skb packet to get re-segmented + * (depending on net device features). This could still be + * a MTU violation, so this flag enables performing MTU + * check against segments, with a different violation + * return code to tell it apart. Check cannot use len_diff. + * + * On return *mtu_len* pointer contains the MTU value of the net + * device. Remember the net device configured MTU is the L3 size, + * which is returned here and XDP and TC length operate at L2. + * Helper take this into account for you, but remember when using + * MTU value in your BPF-code. + * + * Return + * * 0 on success, and populate MTU value in *mtu_len* pointer. + * + * * < 0 if any input argument is invalid (*mtu_len* not updated) + * + * MTU violations return positive values, but also populate MTU + * value in *mtu_len* pointer, as this can be needed for + * implementing PMTU handing: + * + * * **BPF_MTU_CHK_RET_FRAG_NEEDED** + * * **BPF_MTU_CHK_RET_SEGS_TOOBIG** + * + * long bpf_for_each_map_elem(struct bpf_map *map, void *callback_fn, void *callback_ctx, u64 flags) + * Description + * For each element in **map**, call **callback_fn** function with + * **map**, **callback_ctx** and other map-specific parameters. + * The **callback_fn** should be a static function and + * the **callback_ctx** should be a pointer to the stack. + * The **flags** is used to control certain aspects of the helper. + * Currently, the **flags** must be 0. + * + * The following are a list of supported map types and their + * respective expected callback signatures: + * + * BPF_MAP_TYPE_HASH, BPF_MAP_TYPE_PERCPU_HASH, + * BPF_MAP_TYPE_LRU_HASH, BPF_MAP_TYPE_LRU_PERCPU_HASH, + * BPF_MAP_TYPE_ARRAY, BPF_MAP_TYPE_PERCPU_ARRAY + * + * long (\*callback_fn)(struct bpf_map \*map, const void \*key, void \*value, void \*ctx); + * + * For per_cpu maps, the map_value is the value on the cpu where the + * bpf_prog is running. + * + * If **callback_fn** return 0, the helper will continue to the next + * element. If return value is 1, the helper will skip the rest of + * elements and return. Other return values are not used now. + * + * Return + * The number of traversed map elements for success, **-EINVAL** for + * invalid **flags**. + * + * long bpf_snprintf(char *str, u32 str_size, const char *fmt, u64 *data, u32 data_len) + * Description + * Outputs a string into the **str** buffer of size **str_size** + * based on a format string stored in a read-only map pointed by + * **fmt**. + * + * Each format specifier in **fmt** corresponds to one u64 element + * in the **data** array. For strings and pointers where pointees + * are accessed, only the pointer values are stored in the *data* + * array. The *data_len* is the size of *data* in bytes - must be + * a multiple of 8. + * + * Formats **%s** and **%p{i,I}{4,6}** require to read kernel + * memory. Reading kernel memory may fail due to either invalid + * address or valid address but requiring a major memory fault. If + * reading kernel memory fails, the string for **%s** will be an + * empty string, and the ip address for **%p{i,I}{4,6}** will be 0. + * Not returning error to bpf program is consistent with what + * **bpf_trace_printk**\ () does for now. + * + * Return + * The strictly positive length of the formatted string, including + * the trailing zero character. If the return value is greater than + * **str_size**, **str** contains a truncated string, guaranteed to + * be zero-terminated except when **str_size** is 0. + * + * Or **-EBUSY** if the per-CPU memory copy buffer is busy. + * + * long bpf_sys_bpf(u32 cmd, void *attr, u32 attr_size) + * Description + * Execute bpf syscall with given arguments. + * Return + * A syscall result. + * + * long bpf_btf_find_by_name_kind(char *name, int name_sz, u32 kind, int flags) + * Description + * Find BTF type with given name and kind in vmlinux BTF or in module's BTFs. + * Return + * Returns btf_id and btf_obj_fd in lower and upper 32 bits. + * + * long bpf_sys_close(u32 fd) + * Description + * Execute close syscall for given FD. + * Return + * A syscall result. + * + * long bpf_timer_init(struct bpf_timer *timer, struct bpf_map *map, u64 flags) + * Description + * Initialize the timer. + * First 4 bits of *flags* specify clockid. + * Only CLOCK_MONOTONIC, CLOCK_REALTIME, CLOCK_BOOTTIME are allowed. + * All other bits of *flags* are reserved. + * The verifier will reject the program if *timer* is not from + * the same *map*. + * Return + * 0 on success. + * **-EBUSY** if *timer* is already initialized. + * **-EINVAL** if invalid *flags* are passed. + * **-EPERM** if *timer* is in a map that doesn't have any user references. + * The user space should either hold a file descriptor to a map with timers + * or pin such map in bpffs. When map is unpinned or file descriptor is + * closed all timers in the map will be cancelled and freed. + * + * long bpf_timer_set_callback(struct bpf_timer *timer, void *callback_fn) + * Description + * Configure the timer to call *callback_fn* static function. + * Return + * 0 on success. + * **-EINVAL** if *timer* was not initialized with bpf_timer_init() earlier. + * **-EPERM** if *timer* is in a map that doesn't have any user references. + * The user space should either hold a file descriptor to a map with timers + * or pin such map in bpffs. When map is unpinned or file descriptor is + * closed all timers in the map will be cancelled and freed. + * + * long bpf_timer_start(struct bpf_timer *timer, u64 nsecs, u64 flags) + * Description + * Set timer expiration N nanoseconds from the current time. The + * configured callback will be invoked in soft irq context on some cpu + * and will not repeat unless another bpf_timer_start() is made. + * In such case the next invocation can migrate to a different cpu. + * Since struct bpf_timer is a field inside map element the map + * owns the timer. The bpf_timer_set_callback() will increment refcnt + * of BPF program to make sure that callback_fn code stays valid. + * When user space reference to a map reaches zero all timers + * in a map are cancelled and corresponding program's refcnts are + * decremented. This is done to make sure that Ctrl-C of a user + * process doesn't leave any timers running. If map is pinned in + * bpffs the callback_fn can re-arm itself indefinitely. + * bpf_map_update/delete_elem() helpers and user space sys_bpf commands + * cancel and free the timer in the given map element. + * The map can contain timers that invoke callback_fn-s from different + * programs. The same callback_fn can serve different timers from + * different maps if key/value layout matches across maps. + * Every bpf_timer_set_callback() can have different callback_fn. + * + * *flags* can be one of: + * + * **BPF_F_TIMER_ABS** + * Start the timer in absolute expire value instead of the + * default relative one. + * **BPF_F_TIMER_CPU_PIN** + * Timer will be pinned to the CPU of the caller. + * + * Return + * 0 on success. + * **-EINVAL** if *timer* was not initialized with bpf_timer_init() earlier + * or invalid *flags* are passed. + * + * long bpf_timer_cancel(struct bpf_timer *timer) + * Description + * Cancel the timer and wait for callback_fn to finish if it was running. + * Return + * 0 if the timer was not active. + * 1 if the timer was active. + * **-EINVAL** if *timer* was not initialized with bpf_timer_init() earlier. + * **-EDEADLK** if callback_fn tried to call bpf_timer_cancel() on its + * own timer which would have led to a deadlock otherwise. + * + * u64 bpf_get_func_ip(void *ctx) + * Description + * Get address of the traced function (for tracing and kprobe programs). + * + * When called for kprobe program attached as uprobe it returns + * probe address for both entry and return uprobe. + * + * Return + * Address of the traced function for kprobe. + * 0 for kprobes placed within the function (not at the entry). + * Address of the probe for uprobe and return uprobe. + * + * u64 bpf_get_attach_cookie(void *ctx) + * Description + * Get bpf_cookie value provided (optionally) during the program + * attachment. It might be different for each individual + * attachment, even if BPF program itself is the same. + * Expects BPF program context *ctx* as a first argument. + * + * Supported for the following program types: + * - kprobe/uprobe; + * - tracepoint; + * - perf_event. + * Return + * Value specified by user at BPF link creation/attachment time + * or 0, if it was not specified. + * + * long bpf_task_pt_regs(struct task_struct *task) + * Description + * Get the struct pt_regs associated with **task**. + * Return + * A pointer to struct pt_regs. + * + * long bpf_get_branch_snapshot(void *entries, u32 size, u64 flags) + * Description + * Get branch trace from hardware engines like Intel LBR. The + * hardware engine is stopped shortly after the helper is + * called. Therefore, the user need to filter branch entries + * based on the actual use case. To capture branch trace + * before the trigger point of the BPF program, the helper + * should be called at the beginning of the BPF program. + * + * The data is stored as struct perf_branch_entry into output + * buffer *entries*. *size* is the size of *entries* in bytes. + * *flags* is reserved for now and must be zero. + * + * Return + * On success, number of bytes written to *buf*. On error, a + * negative value. + * + * **-EINVAL** if *flags* is not zero. + * + * **-ENOENT** if architecture does not support branch records. + * + * long bpf_trace_vprintk(const char *fmt, u32 fmt_size, const void *data, u32 data_len) + * Description + * Behaves like **bpf_trace_printk**\ () helper, but takes an array of u64 + * to format and can handle more format args as a result. + * + * Arguments are to be used as in **bpf_seq_printf**\ () helper. + * Return + * The number of bytes written to the buffer, or a negative error + * in case of failure. + * + * struct unix_sock *bpf_skc_to_unix_sock(void *sk) + * Description + * Dynamically cast a *sk* pointer to a *unix_sock* pointer. + * Return + * *sk* if casting is valid, or **NULL** otherwise. + * + * long bpf_kallsyms_lookup_name(const char *name, int name_sz, int flags, u64 *res) + * Description + * Get the address of a kernel symbol, returned in *res*. *res* is + * set to 0 if the symbol is not found. + * Return + * On success, zero. On error, a negative value. + * + * **-EINVAL** if *flags* is not zero. + * + * **-EINVAL** if string *name* is not the same size as *name_sz*. + * + * **-ENOENT** if symbol is not found. + * + * **-EPERM** if caller does not have permission to obtain kernel address. + * + * long bpf_find_vma(struct task_struct *task, u64 addr, void *callback_fn, void *callback_ctx, u64 flags) + * Description + * Find vma of *task* that contains *addr*, call *callback_fn* + * function with *task*, *vma*, and *callback_ctx*. + * The *callback_fn* should be a static function and + * the *callback_ctx* should be a pointer to the stack. + * The *flags* is used to control certain aspects of the helper. + * Currently, the *flags* must be 0. + * + * The expected callback signature is + * + * long (\*callback_fn)(struct task_struct \*task, struct vm_area_struct \*vma, void \*callback_ctx); + * + * Return + * 0 on success. + * **-ENOENT** if *task->mm* is NULL, or no vma contains *addr*. + * **-EBUSY** if failed to try lock mmap_lock. + * **-EINVAL** for invalid **flags**. + * + * long bpf_loop(u32 nr_loops, void *callback_fn, void *callback_ctx, u64 flags) + * Description + * For **nr_loops**, call **callback_fn** function + * with **callback_ctx** as the context parameter. + * The **callback_fn** should be a static function and + * the **callback_ctx** should be a pointer to the stack. + * The **flags** is used to control certain aspects of the helper. + * Currently, the **flags** must be 0. Currently, nr_loops is + * limited to 1 << 23 (~8 million) loops. + * + * long (\*callback_fn)(u64 index, void \*ctx); + * + * where **index** is the current index in the loop. The index + * is zero-indexed. + * + * If **callback_fn** returns 0, the helper will continue to the next + * loop. If return value is 1, the helper will skip the rest of + * the loops and return. Other return values are not used now, + * and will be rejected by the verifier. + * + * Return + * The number of loops performed, **-EINVAL** for invalid **flags**, + * **-E2BIG** if **nr_loops** exceeds the maximum number of loops. + * + * long bpf_strncmp(const char *s1, u32 s1_sz, const char *s2) + * Description + * Do strncmp() between **s1** and **s2**. **s1** doesn't need + * to be null-terminated and **s1_sz** is the maximum storage + * size of **s1**. **s2** must be a read-only string. + * Return + * An integer less than, equal to, or greater than zero + * if the first **s1_sz** bytes of **s1** is found to be + * less than, to match, or be greater than **s2**. + * + * long bpf_get_func_arg(void *ctx, u32 n, u64 *value) + * Description + * Get **n**-th argument register (zero based) of the traced function (for tracing programs) + * returned in **value**. + * + * Return + * 0 on success. + * **-EINVAL** if n >= argument register count of traced function. + * + * long bpf_get_func_ret(void *ctx, u64 *value) + * Description + * Get return value of the traced function (for tracing programs) + * in **value**. + * + * Return + * 0 on success. + * **-EOPNOTSUPP** for tracing programs other than BPF_TRACE_FEXIT or BPF_MODIFY_RETURN. + * + * long bpf_get_func_arg_cnt(void *ctx) + * Description + * Get number of registers of the traced function (for tracing programs) where + * function arguments are stored in these registers. + * + * Return + * The number of argument registers of the traced function. + * + * int bpf_get_retval(void) + * Description + * Get the BPF program's return value that will be returned to the upper layers. + * + * This helper is currently supported by cgroup programs and only by the hooks + * where BPF program's return value is returned to the userspace via errno. + * Return + * The BPF program's return value. + * + * int bpf_set_retval(int retval) + * Description + * Set the BPF program's return value that will be returned to the upper layers. + * + * This helper is currently supported by cgroup programs and only by the hooks + * where BPF program's return value is returned to the userspace via errno. + * + * Note that there is the following corner case where the program exports an error + * via bpf_set_retval but signals success via 'return 1': + * + * bpf_set_retval(-EPERM); + * return 1; + * + * In this case, the BPF program's return value will use helper's -EPERM. This + * still holds true for cgroup/bind{4,6} which supports extra 'return 3' success case. + * + * Return + * 0 on success, or a negative error in case of failure. + * + * u64 bpf_xdp_get_buff_len(struct xdp_buff *xdp_md) + * Description + * Get the total size of a given xdp buff (linear and paged area) + * Return + * The total size of a given xdp buffer. + * + * long bpf_xdp_load_bytes(struct xdp_buff *xdp_md, u32 offset, void *buf, u32 len) + * Description + * This helper is provided as an easy way to load data from a + * xdp buffer. It can be used to load *len* bytes from *offset* from + * the frame associated to *xdp_md*, into the buffer pointed by + * *buf*. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_xdp_store_bytes(struct xdp_buff *xdp_md, u32 offset, void *buf, u32 len) + * Description + * Store *len* bytes from buffer *buf* into the frame + * associated to *xdp_md*, at *offset*. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_copy_from_user_task(void *dst, u32 size, const void *user_ptr, struct task_struct *tsk, u64 flags) + * Description + * Read *size* bytes from user space address *user_ptr* in *tsk*'s + * address space, and stores the data in *dst*. *flags* is not + * used yet and is provided for future extensibility. This helper + * can only be used by sleepable programs. + * Return + * 0 on success, or a negative error in case of failure. On error + * *dst* buffer is zeroed out. + * + * long bpf_skb_set_tstamp(struct sk_buff *skb, u64 tstamp, u32 tstamp_type) + * Description + * Change the __sk_buff->tstamp_type to *tstamp_type* + * and set *tstamp* to the __sk_buff->tstamp together. + * + * If there is no need to change the __sk_buff->tstamp_type, + * the tstamp value can be directly written to __sk_buff->tstamp + * instead. + * + * BPF_SKB_TSTAMP_DELIVERY_MONO is the only tstamp that + * will be kept during bpf_redirect_*(). A non zero + * *tstamp* must be used with the BPF_SKB_TSTAMP_DELIVERY_MONO + * *tstamp_type*. + * + * A BPF_SKB_TSTAMP_UNSPEC *tstamp_type* can only be used + * with a zero *tstamp*. + * + * Only IPv4 and IPv6 skb->protocol are supported. + * + * This function is most useful when it needs to set a + * mono delivery time to __sk_buff->tstamp and then + * bpf_redirect_*() to the egress of an iface. For example, + * changing the (rcv) timestamp in __sk_buff->tstamp at + * ingress to a mono delivery time and then bpf_redirect_*() + * to sch_fq@phy-dev. + * Return + * 0 on success. + * **-EINVAL** for invalid input + * **-EOPNOTSUPP** for unsupported protocol + * + * long bpf_ima_file_hash(struct file *file, void *dst, u32 size) + * Description + * Returns a calculated IMA hash of the *file*. + * If the hash is larger than *size*, then only *size* + * bytes will be copied to *dst* + * Return + * The **hash_algo** is returned on success, + * **-EOPNOTSUPP** if the hash calculation failed or **-EINVAL** if + * invalid arguments are passed. + * + * void *bpf_kptr_xchg(void *dst, void *ptr) + * Description + * Exchange kptr at pointer *dst* with *ptr*, and return the old value. + * *dst* can be map value or local kptr. *ptr* can be NULL, otherwise + * it must be a referenced pointer which will be released when this helper + * is called. + * Return + * The old value of kptr (which can be NULL). The returned pointer + * if not NULL, is a reference which must be released using its + * corresponding release function, or moved into a BPF map before + * program exit. + * + * void *bpf_map_lookup_percpu_elem(struct bpf_map *map, const void *key, u32 cpu) + * Description + * Perform a lookup in *percpu map* for an entry associated to + * *key* on *cpu*. + * Return + * Map value associated to *key* on *cpu*, or **NULL** if no entry + * was found or *cpu* is invalid. + * + * struct mptcp_sock *bpf_skc_to_mptcp_sock(void *sk) + * Description + * Dynamically cast a *sk* pointer to a *mptcp_sock* pointer. + * Return + * *sk* if casting is valid, or **NULL** otherwise. + * + * long bpf_dynptr_from_mem(void *data, u64 size, u64 flags, struct bpf_dynptr *ptr) + * Description + * Get a dynptr to local memory *data*. + * + * *data* must be a ptr to a map value. + * The maximum *size* supported is DYNPTR_MAX_SIZE. + * *flags* is currently unused. + * Return + * 0 on success, -E2BIG if the size exceeds DYNPTR_MAX_SIZE, + * -EINVAL if flags is not 0. + * + * long bpf_ringbuf_reserve_dynptr(void *ringbuf, u32 size, u64 flags, struct bpf_dynptr *ptr) + * Description + * Reserve *size* bytes of payload in a ring buffer *ringbuf* + * through the dynptr interface. *flags* must be 0. + * + * Please note that a corresponding bpf_ringbuf_submit_dynptr or + * bpf_ringbuf_discard_dynptr must be called on *ptr*, even if the + * reservation fails. This is enforced by the verifier. + * Return + * 0 on success, or a negative error in case of failure. + * + * void bpf_ringbuf_submit_dynptr(struct bpf_dynptr *ptr, u64 flags) + * Description + * Submit reserved ring buffer sample, pointed to by *data*, + * through the dynptr interface. This is a no-op if the dynptr is + * invalid/null. + * + * For more information on *flags*, please see + * 'bpf_ringbuf_submit'. + * Return + * Nothing. Always succeeds. + * + * void bpf_ringbuf_discard_dynptr(struct bpf_dynptr *ptr, u64 flags) + * Description + * Discard reserved ring buffer sample through the dynptr + * interface. This is a no-op if the dynptr is invalid/null. + * + * For more information on *flags*, please see + * 'bpf_ringbuf_discard'. + * Return + * Nothing. Always succeeds. + * + * long bpf_dynptr_read(void *dst, u64 len, const struct bpf_dynptr *src, u64 offset, u64 flags) + * Description + * Read *len* bytes from *src* into *dst*, starting from *offset* + * into *src*. + * *flags* is currently unused. + * Return + * 0 on success, -E2BIG if *offset* + *len* exceeds the length + * of *src*'s data, -EINVAL if *src* is an invalid dynptr or if + * *flags* is not 0. + * + * long bpf_dynptr_write(const struct bpf_dynptr *dst, u64 offset, void *src, u64 len, u64 flags) + * Description + * Write *len* bytes from *src* into *dst*, starting from *offset* + * into *dst*. + * + * *flags* must be 0 except for skb-type dynptrs. + * + * For skb-type dynptrs: + * * All data slices of the dynptr are automatically + * invalidated after **bpf_dynptr_write**\ (). This is + * because writing may pull the skb and change the + * underlying packet buffer. + * + * * For *flags*, please see the flags accepted by + * **bpf_skb_store_bytes**\ (). + * Return + * 0 on success, -E2BIG if *offset* + *len* exceeds the length + * of *dst*'s data, -EINVAL if *dst* is an invalid dynptr or if *dst* + * is a read-only dynptr or if *flags* is not correct. For skb-type dynptrs, + * other errors correspond to errors returned by **bpf_skb_store_bytes**\ (). + * + * void *bpf_dynptr_data(const struct bpf_dynptr *ptr, u64 offset, u64 len) + * Description + * Get a pointer to the underlying dynptr data. + * + * *len* must be a statically known value. The returned data slice + * is invalidated whenever the dynptr is invalidated. + * + * skb and xdp type dynptrs may not use bpf_dynptr_data. They should + * instead use bpf_dynptr_slice and bpf_dynptr_slice_rdwr. + * Return + * Pointer to the underlying dynptr data, NULL if the dynptr is + * read-only, if the dynptr is invalid, or if the offset and length + * is out of bounds. + * + * s64 bpf_tcp_raw_gen_syncookie_ipv4(struct iphdr *iph, struct tcphdr *th, u32 th_len) + * Description + * Try to issue a SYN cookie for the packet with corresponding + * IPv4/TCP headers, *iph* and *th*, without depending on a + * listening socket. + * + * *iph* points to the IPv4 header. + * + * *th* points to the start of the TCP header, while *th_len* + * contains the length of the TCP header (at least + * **sizeof**\ (**struct tcphdr**)). + * Return + * On success, lower 32 bits hold the generated SYN cookie in + * followed by 16 bits which hold the MSS value for that cookie, + * and the top 16 bits are unused. + * + * On failure, the returned value is one of the following: + * + * **-EINVAL** if *th_len* is invalid. + * + * s64 bpf_tcp_raw_gen_syncookie_ipv6(struct ipv6hdr *iph, struct tcphdr *th, u32 th_len) + * Description + * Try to issue a SYN cookie for the packet with corresponding + * IPv6/TCP headers, *iph* and *th*, without depending on a + * listening socket. + * + * *iph* points to the IPv6 header. + * + * *th* points to the start of the TCP header, while *th_len* + * contains the length of the TCP header (at least + * **sizeof**\ (**struct tcphdr**)). + * Return + * On success, lower 32 bits hold the generated SYN cookie in + * followed by 16 bits which hold the MSS value for that cookie, + * and the top 16 bits are unused. + * + * On failure, the returned value is one of the following: + * + * **-EINVAL** if *th_len* is invalid. + * + * **-EPROTONOSUPPORT** if CONFIG_IPV6 is not builtin. + * + * long bpf_tcp_raw_check_syncookie_ipv4(struct iphdr *iph, struct tcphdr *th) + * Description + * Check whether *iph* and *th* contain a valid SYN cookie ACK + * without depending on a listening socket. + * + * *iph* points to the IPv4 header. + * + * *th* points to the TCP header. + * Return + * 0 if *iph* and *th* are a valid SYN cookie ACK. + * + * On failure, the returned value is one of the following: + * + * **-EACCES** if the SYN cookie is not valid. + * + * long bpf_tcp_raw_check_syncookie_ipv6(struct ipv6hdr *iph, struct tcphdr *th) + * Description + * Check whether *iph* and *th* contain a valid SYN cookie ACK + * without depending on a listening socket. + * + * *iph* points to the IPv6 header. + * + * *th* points to the TCP header. + * Return + * 0 if *iph* and *th* are a valid SYN cookie ACK. + * + * On failure, the returned value is one of the following: + * + * **-EACCES** if the SYN cookie is not valid. + * + * **-EPROTONOSUPPORT** if CONFIG_IPV6 is not builtin. + * + * u64 bpf_ktime_get_tai_ns(void) + * Description + * A nonsettable system-wide clock derived from wall-clock time but + * ignoring leap seconds. This clock does not experience + * discontinuities and backwards jumps caused by NTP inserting leap + * seconds as CLOCK_REALTIME does. + * + * See: **clock_gettime**\ (**CLOCK_TAI**) + * Return + * Current *ktime*. + * + * long bpf_user_ringbuf_drain(struct bpf_map *map, void *callback_fn, void *ctx, u64 flags) + * Description + * Drain samples from the specified user ring buffer, and invoke + * the provided callback for each such sample: + * + * long (\*callback_fn)(const struct bpf_dynptr \*dynptr, void \*ctx); + * + * If **callback_fn** returns 0, the helper will continue to try + * and drain the next sample, up to a maximum of + * BPF_MAX_USER_RINGBUF_SAMPLES samples. If the return value is 1, + * the helper will skip the rest of the samples and return. Other + * return values are not used now, and will be rejected by the + * verifier. + * Return + * The number of drained samples if no error was encountered while + * draining samples, or 0 if no samples were present in the ring + * buffer. If a user-space producer was epoll-waiting on this map, + * and at least one sample was drained, they will receive an event + * notification notifying them of available space in the ring + * buffer. If the BPF_RB_NO_WAKEUP flag is passed to this + * function, no wakeup notification will be sent. If the + * BPF_RB_FORCE_WAKEUP flag is passed, a wakeup notification will + * be sent even if no sample was drained. + * + * On failure, the returned value is one of the following: + * + * **-EBUSY** if the ring buffer is contended, and another calling + * context was concurrently draining the ring buffer. + * + * **-EINVAL** if user-space is not properly tracking the ring + * buffer due to the producer position not being aligned to 8 + * bytes, a sample not being aligned to 8 bytes, or the producer + * position not matching the advertised length of a sample. + * + * **-E2BIG** if user-space has tried to publish a sample which is + * larger than the size of the ring buffer, or which cannot fit + * within a struct bpf_dynptr. + * + * void *bpf_cgrp_storage_get(struct bpf_map *map, struct cgroup *cgroup, void *value, u64 flags) + * Description + * Get a bpf_local_storage from the *cgroup*. + * + * Logically, it could be thought of as getting the value from + * a *map* with *cgroup* as the **key**. From this + * perspective, the usage is not much different from + * **bpf_map_lookup_elem**\ (*map*, **&**\ *cgroup*) except this + * helper enforces the key must be a cgroup struct and the map must also + * be a **BPF_MAP_TYPE_CGRP_STORAGE**. + * + * In reality, the local-storage value is embedded directly inside of the + * *cgroup* object itself, rather than being located in the + * **BPF_MAP_TYPE_CGRP_STORAGE** map. When the local-storage value is + * queried for some *map* on a *cgroup* object, the kernel will perform an + * O(n) iteration over all of the live local-storage values for that + * *cgroup* object until the local-storage value for the *map* is found. + * + * An optional *flags* (**BPF_LOCAL_STORAGE_GET_F_CREATE**) can be + * used such that a new bpf_local_storage will be + * created if one does not exist. *value* can be used + * together with **BPF_LOCAL_STORAGE_GET_F_CREATE** to specify + * the initial value of a bpf_local_storage. If *value* is + * **NULL**, the new bpf_local_storage will be zero initialized. + * Return + * A bpf_local_storage pointer is returned on success. + * + * **NULL** if not found or there was an error in adding + * a new bpf_local_storage. + * + * long bpf_cgrp_storage_delete(struct bpf_map *map, struct cgroup *cgroup) + * Description + * Delete a bpf_local_storage from a *cgroup*. + * Return + * 0 on success. + * + * **-ENOENT** if the bpf_local_storage cannot be found. + */ +#define ___BPF_FUNC_MAPPER(FN, ctx...) \ + FN(unspec, 0, ##ctx) \ + FN(map_lookup_elem, 1, ##ctx) \ + FN(map_update_elem, 2, ##ctx) \ + FN(map_delete_elem, 3, ##ctx) \ + FN(probe_read, 4, ##ctx) \ + FN(ktime_get_ns, 5, ##ctx) \ + FN(trace_printk, 6, ##ctx) \ + FN(get_prandom_u32, 7, ##ctx) \ + FN(get_smp_processor_id, 8, ##ctx) \ + FN(skb_store_bytes, 9, ##ctx) \ + FN(l3_csum_replace, 10, ##ctx) \ + FN(l4_csum_replace, 11, ##ctx) \ + FN(tail_call, 12, ##ctx) \ + FN(clone_redirect, 13, ##ctx) \ + FN(get_current_pid_tgid, 14, ##ctx) \ + FN(get_current_uid_gid, 15, ##ctx) \ + FN(get_current_comm, 16, ##ctx) \ + FN(get_cgroup_classid, 17, ##ctx) \ + FN(skb_vlan_push, 18, ##ctx) \ + FN(skb_vlan_pop, 19, ##ctx) \ + FN(skb_get_tunnel_key, 20, ##ctx) \ + FN(skb_set_tunnel_key, 21, ##ctx) \ + FN(perf_event_read, 22, ##ctx) \ + FN(redirect, 23, ##ctx) \ + FN(get_route_realm, 24, ##ctx) \ + FN(perf_event_output, 25, ##ctx) \ + FN(skb_load_bytes, 26, ##ctx) \ + FN(get_stackid, 27, ##ctx) \ + FN(csum_diff, 28, ##ctx) \ + FN(skb_get_tunnel_opt, 29, ##ctx) \ + FN(skb_set_tunnel_opt, 30, ##ctx) \ + FN(skb_change_proto, 31, ##ctx) \ + FN(skb_change_type, 32, ##ctx) \ + FN(skb_under_cgroup, 33, ##ctx) \ + FN(get_hash_recalc, 34, ##ctx) \ + FN(get_current_task, 35, ##ctx) \ + FN(probe_write_user, 36, ##ctx) \ + FN(current_task_under_cgroup, 37, ##ctx) \ + FN(skb_change_tail, 38, ##ctx) \ + FN(skb_pull_data, 39, ##ctx) \ + FN(csum_update, 40, ##ctx) \ + FN(set_hash_invalid, 41, ##ctx) \ + FN(get_numa_node_id, 42, ##ctx) \ + FN(skb_change_head, 43, ##ctx) \ + FN(xdp_adjust_head, 44, ##ctx) \ + FN(probe_read_str, 45, ##ctx) \ + FN(get_socket_cookie, 46, ##ctx) \ + FN(get_socket_uid, 47, ##ctx) \ + FN(set_hash, 48, ##ctx) \ + FN(setsockopt, 49, ##ctx) \ + FN(skb_adjust_room, 50, ##ctx) \ + FN(redirect_map, 51, ##ctx) \ + FN(sk_redirect_map, 52, ##ctx) \ + FN(sock_map_update, 53, ##ctx) \ + FN(xdp_adjust_meta, 54, ##ctx) \ + FN(perf_event_read_value, 55, ##ctx) \ + FN(perf_prog_read_value, 56, ##ctx) \ + FN(getsockopt, 57, ##ctx) \ + FN(override_return, 58, ##ctx) \ + FN(sock_ops_cb_flags_set, 59, ##ctx) \ + FN(msg_redirect_map, 60, ##ctx) \ + FN(msg_apply_bytes, 61, ##ctx) \ + FN(msg_cork_bytes, 62, ##ctx) \ + FN(msg_pull_data, 63, ##ctx) \ + FN(bind, 64, ##ctx) \ + FN(xdp_adjust_tail, 65, ##ctx) \ + FN(skb_get_xfrm_state, 66, ##ctx) \ + FN(get_stack, 67, ##ctx) \ + FN(skb_load_bytes_relative, 68, ##ctx) \ + FN(fib_lookup, 69, ##ctx) \ + FN(sock_hash_update, 70, ##ctx) \ + FN(msg_redirect_hash, 71, ##ctx) \ + FN(sk_redirect_hash, 72, ##ctx) \ + FN(lwt_push_encap, 73, ##ctx) \ + FN(lwt_seg6_store_bytes, 74, ##ctx) \ + FN(lwt_seg6_adjust_srh, 75, ##ctx) \ + FN(lwt_seg6_action, 76, ##ctx) \ + FN(rc_repeat, 77, ##ctx) \ + FN(rc_keydown, 78, ##ctx) \ + FN(skb_cgroup_id, 79, ##ctx) \ + FN(get_current_cgroup_id, 80, ##ctx) \ + FN(get_local_storage, 81, ##ctx) \ + FN(sk_select_reuseport, 82, ##ctx) \ + FN(skb_ancestor_cgroup_id, 83, ##ctx) \ + FN(sk_lookup_tcp, 84, ##ctx) \ + FN(sk_lookup_udp, 85, ##ctx) \ + FN(sk_release, 86, ##ctx) \ + FN(map_push_elem, 87, ##ctx) \ + FN(map_pop_elem, 88, ##ctx) \ + FN(map_peek_elem, 89, ##ctx) \ + FN(msg_push_data, 90, ##ctx) \ + FN(msg_pop_data, 91, ##ctx) \ + FN(rc_pointer_rel, 92, ##ctx) \ + FN(spin_lock, 93, ##ctx) \ + FN(spin_unlock, 94, ##ctx) \ + FN(sk_fullsock, 95, ##ctx) \ + FN(tcp_sock, 96, ##ctx) \ + FN(skb_ecn_set_ce, 97, ##ctx) \ + FN(get_listener_sock, 98, ##ctx) \ + FN(skc_lookup_tcp, 99, ##ctx) \ + FN(tcp_check_syncookie, 100, ##ctx) \ + FN(sysctl_get_name, 101, ##ctx) \ + FN(sysctl_get_current_value, 102, ##ctx) \ + FN(sysctl_get_new_value, 103, ##ctx) \ + FN(sysctl_set_new_value, 104, ##ctx) \ + FN(strtol, 105, ##ctx) \ + FN(strtoul, 106, ##ctx) \ + FN(sk_storage_get, 107, ##ctx) \ + FN(sk_storage_delete, 108, ##ctx) \ + FN(send_signal, 109, ##ctx) \ + FN(tcp_gen_syncookie, 110, ##ctx) \ + FN(skb_output, 111, ##ctx) \ + FN(probe_read_user, 112, ##ctx) \ + FN(probe_read_kernel, 113, ##ctx) \ + FN(probe_read_user_str, 114, ##ctx) \ + FN(probe_read_kernel_str, 115, ##ctx) \ + FN(tcp_send_ack, 116, ##ctx) \ + FN(send_signal_thread, 117, ##ctx) \ + FN(jiffies64, 118, ##ctx) \ + FN(read_branch_records, 119, ##ctx) \ + FN(get_ns_current_pid_tgid, 120, ##ctx) \ + FN(xdp_output, 121, ##ctx) \ + FN(get_netns_cookie, 122, ##ctx) \ + FN(get_current_ancestor_cgroup_id, 123, ##ctx) \ + FN(sk_assign, 124, ##ctx) \ + FN(ktime_get_boot_ns, 125, ##ctx) \ + FN(seq_printf, 126, ##ctx) \ + FN(seq_write, 127, ##ctx) \ + FN(sk_cgroup_id, 128, ##ctx) \ + FN(sk_ancestor_cgroup_id, 129, ##ctx) \ + FN(ringbuf_output, 130, ##ctx) \ + FN(ringbuf_reserve, 131, ##ctx) \ + FN(ringbuf_submit, 132, ##ctx) \ + FN(ringbuf_discard, 133, ##ctx) \ + FN(ringbuf_query, 134, ##ctx) \ + FN(csum_level, 135, ##ctx) \ + FN(skc_to_tcp6_sock, 136, ##ctx) \ + FN(skc_to_tcp_sock, 137, ##ctx) \ + FN(skc_to_tcp_timewait_sock, 138, ##ctx) \ + FN(skc_to_tcp_request_sock, 139, ##ctx) \ + FN(skc_to_udp6_sock, 140, ##ctx) \ + FN(get_task_stack, 141, ##ctx) \ + FN(load_hdr_opt, 142, ##ctx) \ + FN(store_hdr_opt, 143, ##ctx) \ + FN(reserve_hdr_opt, 144, ##ctx) \ + FN(inode_storage_get, 145, ##ctx) \ + FN(inode_storage_delete, 146, ##ctx) \ + FN(d_path, 147, ##ctx) \ + FN(copy_from_user, 148, ##ctx) \ + FN(snprintf_btf, 149, ##ctx) \ + FN(seq_printf_btf, 150, ##ctx) \ + FN(skb_cgroup_classid, 151, ##ctx) \ + FN(redirect_neigh, 152, ##ctx) \ + FN(per_cpu_ptr, 153, ##ctx) \ + FN(this_cpu_ptr, 154, ##ctx) \ + FN(redirect_peer, 155, ##ctx) \ + FN(task_storage_get, 156, ##ctx) \ + FN(task_storage_delete, 157, ##ctx) \ + FN(get_current_task_btf, 158, ##ctx) \ + FN(bprm_opts_set, 159, ##ctx) \ + FN(ktime_get_coarse_ns, 160, ##ctx) \ + FN(ima_inode_hash, 161, ##ctx) \ + FN(sock_from_file, 162, ##ctx) \ + FN(check_mtu, 163, ##ctx) \ + FN(for_each_map_elem, 164, ##ctx) \ + FN(snprintf, 165, ##ctx) \ + FN(sys_bpf, 166, ##ctx) \ + FN(btf_find_by_name_kind, 167, ##ctx) \ + FN(sys_close, 168, ##ctx) \ + FN(timer_init, 169, ##ctx) \ + FN(timer_set_callback, 170, ##ctx) \ + FN(timer_start, 171, ##ctx) \ + FN(timer_cancel, 172, ##ctx) \ + FN(get_func_ip, 173, ##ctx) \ + FN(get_attach_cookie, 174, ##ctx) \ + FN(task_pt_regs, 175, ##ctx) \ + FN(get_branch_snapshot, 176, ##ctx) \ + FN(trace_vprintk, 177, ##ctx) \ + FN(skc_to_unix_sock, 178, ##ctx) \ + FN(kallsyms_lookup_name, 179, ##ctx) \ + FN(find_vma, 180, ##ctx) \ + FN(loop, 181, ##ctx) \ + FN(strncmp, 182, ##ctx) \ + FN(get_func_arg, 183, ##ctx) \ + FN(get_func_ret, 184, ##ctx) \ + FN(get_func_arg_cnt, 185, ##ctx) \ + FN(get_retval, 186, ##ctx) \ + FN(set_retval, 187, ##ctx) \ + FN(xdp_get_buff_len, 188, ##ctx) \ + FN(xdp_load_bytes, 189, ##ctx) \ + FN(xdp_store_bytes, 190, ##ctx) \ + FN(copy_from_user_task, 191, ##ctx) \ + FN(skb_set_tstamp, 192, ##ctx) \ + FN(ima_file_hash, 193, ##ctx) \ + FN(kptr_xchg, 194, ##ctx) \ + FN(map_lookup_percpu_elem, 195, ##ctx) \ + FN(skc_to_mptcp_sock, 196, ##ctx) \ + FN(dynptr_from_mem, 197, ##ctx) \ + FN(ringbuf_reserve_dynptr, 198, ##ctx) \ + FN(ringbuf_submit_dynptr, 199, ##ctx) \ + FN(ringbuf_discard_dynptr, 200, ##ctx) \ + FN(dynptr_read, 201, ##ctx) \ + FN(dynptr_write, 202, ##ctx) \ + FN(dynptr_data, 203, ##ctx) \ + FN(tcp_raw_gen_syncookie_ipv4, 204, ##ctx) \ + FN(tcp_raw_gen_syncookie_ipv6, 205, ##ctx) \ + FN(tcp_raw_check_syncookie_ipv4, 206, ##ctx) \ + FN(tcp_raw_check_syncookie_ipv6, 207, ##ctx) \ + FN(ktime_get_tai_ns, 208, ##ctx) \ + FN(user_ringbuf_drain, 209, ##ctx) \ + FN(cgrp_storage_get, 210, ##ctx) \ + FN(cgrp_storage_delete, 211, ##ctx) \ + /* This helper list is effectively frozen. If you are trying to \ + * add a new helper, you should add a kfunc instead which has \ + * less stability guarantees. See Documentation/bpf/kfuncs.rst \ + */ + +/* backwards-compatibility macros for users of __BPF_FUNC_MAPPER that don't + * know or care about integer value that is now passed as second argument + */ +#define __BPF_FUNC_MAPPER_APPLY(name, value, FN) FN(name), +#define __BPF_FUNC_MAPPER(FN) ___BPF_FUNC_MAPPER(__BPF_FUNC_MAPPER_APPLY, FN) + +/* integer value in 'imm' field of BPF_CALL instruction selects which helper + * function eBPF program intends to call + */ +#define __BPF_ENUM_FN(x, y) BPF_FUNC_ ## x = y, +enum bpf_func_id { + ___BPF_FUNC_MAPPER(__BPF_ENUM_FN) + __BPF_FUNC_MAX_ID, +}; +#undef __BPF_ENUM_FN + +/* All flags used by eBPF helper functions, placed here. */ + +/* BPF_FUNC_skb_store_bytes flags. */ +enum { + BPF_F_RECOMPUTE_CSUM = (1ULL << 0), + BPF_F_INVALIDATE_HASH = (1ULL << 1), +}; + +/* BPF_FUNC_l3_csum_replace and BPF_FUNC_l4_csum_replace flags. + * First 4 bits are for passing the header field size. + */ +enum { + BPF_F_HDR_FIELD_MASK = 0xfULL, +}; + +/* BPF_FUNC_l4_csum_replace flags. */ +enum { + BPF_F_PSEUDO_HDR = (1ULL << 4), + BPF_F_MARK_MANGLED_0 = (1ULL << 5), + BPF_F_MARK_ENFORCE = (1ULL << 6), + BPF_F_IPV6 = (1ULL << 7), +}; + +/* BPF_FUNC_skb_set_tunnel_key and BPF_FUNC_skb_get_tunnel_key flags. */ +enum { + BPF_F_TUNINFO_IPV6 = (1ULL << 0), +}; + +/* flags for both BPF_FUNC_get_stackid and BPF_FUNC_get_stack. */ +enum { + BPF_F_SKIP_FIELD_MASK = 0xffULL, + BPF_F_USER_STACK = (1ULL << 8), +/* flags used by BPF_FUNC_get_stackid only. */ + BPF_F_FAST_STACK_CMP = (1ULL << 9), + BPF_F_REUSE_STACKID = (1ULL << 10), +/* flags used by BPF_FUNC_get_stack only. */ + BPF_F_USER_BUILD_ID = (1ULL << 11), +}; + +/* BPF_FUNC_skb_set_tunnel_key flags. */ +enum { + BPF_F_ZERO_CSUM_TX = (1ULL << 1), + BPF_F_DONT_FRAGMENT = (1ULL << 2), + BPF_F_SEQ_NUMBER = (1ULL << 3), + BPF_F_NO_TUNNEL_KEY = (1ULL << 4), +}; + +/* BPF_FUNC_skb_get_tunnel_key flags. */ +enum { + BPF_F_TUNINFO_FLAGS = (1ULL << 4), +}; + +/* BPF_FUNC_perf_event_output, BPF_FUNC_perf_event_read and + * BPF_FUNC_perf_event_read_value flags. + */ +enum { + BPF_F_INDEX_MASK = 0xffffffffULL, + BPF_F_CURRENT_CPU = BPF_F_INDEX_MASK, +/* BPF_FUNC_perf_event_output for sk_buff input context. */ + BPF_F_CTXLEN_MASK = (0xfffffULL << 32), +}; + +/* Current network namespace */ +enum { + BPF_F_CURRENT_NETNS = (-1L), +}; + +/* BPF_FUNC_csum_level level values. */ +enum { + BPF_CSUM_LEVEL_QUERY, + BPF_CSUM_LEVEL_INC, + BPF_CSUM_LEVEL_DEC, + BPF_CSUM_LEVEL_RESET, +}; + +/* BPF_FUNC_skb_adjust_room flags. */ +enum { + BPF_F_ADJ_ROOM_FIXED_GSO = (1ULL << 0), + BPF_F_ADJ_ROOM_ENCAP_L3_IPV4 = (1ULL << 1), + BPF_F_ADJ_ROOM_ENCAP_L3_IPV6 = (1ULL << 2), + BPF_F_ADJ_ROOM_ENCAP_L4_GRE = (1ULL << 3), + BPF_F_ADJ_ROOM_ENCAP_L4_UDP = (1ULL << 4), + BPF_F_ADJ_ROOM_NO_CSUM_RESET = (1ULL << 5), + BPF_F_ADJ_ROOM_ENCAP_L2_ETH = (1ULL << 6), + BPF_F_ADJ_ROOM_DECAP_L3_IPV4 = (1ULL << 7), + BPF_F_ADJ_ROOM_DECAP_L3_IPV6 = (1ULL << 8), +}; + +enum { + BPF_ADJ_ROOM_ENCAP_L2_MASK = 0xff, + BPF_ADJ_ROOM_ENCAP_L2_SHIFT = 56, +}; + +#define BPF_F_ADJ_ROOM_ENCAP_L2(len) (((__u64)len & \ + BPF_ADJ_ROOM_ENCAP_L2_MASK) \ + << BPF_ADJ_ROOM_ENCAP_L2_SHIFT) + +/* BPF_FUNC_sysctl_get_name flags. */ +enum { + BPF_F_SYSCTL_BASE_NAME = (1ULL << 0), +}; + +/* BPF_FUNC_<kernel_obj>_storage_get flags */ +enum { + BPF_LOCAL_STORAGE_GET_F_CREATE = (1ULL << 0), + /* BPF_SK_STORAGE_GET_F_CREATE is only kept for backward compatibility + * and BPF_LOCAL_STORAGE_GET_F_CREATE must be used instead. + */ + BPF_SK_STORAGE_GET_F_CREATE = BPF_LOCAL_STORAGE_GET_F_CREATE, +}; + +/* BPF_FUNC_read_branch_records flags. */ +enum { + BPF_F_GET_BRANCH_RECORDS_SIZE = (1ULL << 0), +}; + +/* BPF_FUNC_bpf_ringbuf_commit, BPF_FUNC_bpf_ringbuf_discard, and + * BPF_FUNC_bpf_ringbuf_output flags. + */ +enum { + BPF_RB_NO_WAKEUP = (1ULL << 0), + BPF_RB_FORCE_WAKEUP = (1ULL << 1), +}; + +/* BPF_FUNC_bpf_ringbuf_query flags */ +enum { + BPF_RB_AVAIL_DATA = 0, + BPF_RB_RING_SIZE = 1, + BPF_RB_CONS_POS = 2, + BPF_RB_PROD_POS = 3, + BPF_RB_OVERWRITE_POS = 4, +}; + +/* BPF ring buffer constants */ +enum { + BPF_RINGBUF_BUSY_BIT = (1U << 31), + BPF_RINGBUF_DISCARD_BIT = (1U << 30), + BPF_RINGBUF_HDR_SZ = 8, +}; + +/* BPF_FUNC_sk_assign flags in bpf_sk_lookup context. */ +enum { + BPF_SK_LOOKUP_F_REPLACE = (1ULL << 0), + BPF_SK_LOOKUP_F_NO_REUSEPORT = (1ULL << 1), +}; + +/* Mode for BPF_FUNC_skb_adjust_room helper. */ +enum bpf_adj_room_mode { + BPF_ADJ_ROOM_NET, + BPF_ADJ_ROOM_MAC, +}; + +/* Mode for BPF_FUNC_skb_load_bytes_relative helper. */ +enum bpf_hdr_start_off { + BPF_HDR_START_MAC, + BPF_HDR_START_NET, +}; + +/* Encapsulation type for BPF_FUNC_lwt_push_encap helper. */ +enum bpf_lwt_encap_mode { + BPF_LWT_ENCAP_SEG6, + BPF_LWT_ENCAP_SEG6_INLINE, + BPF_LWT_ENCAP_IP, +}; + +/* Flags for bpf_bprm_opts_set helper */ +enum { + BPF_F_BPRM_SECUREEXEC = (1ULL << 0), +}; + +/* Flags for bpf_redirect and bpf_redirect_map helpers */ +enum { + BPF_F_INGRESS = (1ULL << 0), /* used for skb path */ + BPF_F_BROADCAST = (1ULL << 3), /* used for XDP path */ + BPF_F_EXCLUDE_INGRESS = (1ULL << 4), /* used for XDP path */ +#define BPF_F_REDIRECT_FLAGS (BPF_F_INGRESS | BPF_F_BROADCAST | BPF_F_EXCLUDE_INGRESS) +}; + +#define __bpf_md_ptr(type, name) \ +union { \ + type name; \ + __u64 :64; \ +} __attribute__((aligned(8))) + +/* The enum used in skb->tstamp_type. It specifies the clock type + * of the time stored in the skb->tstamp. + */ +enum { + BPF_SKB_TSTAMP_UNSPEC = 0, /* DEPRECATED */ + BPF_SKB_TSTAMP_DELIVERY_MONO = 1, /* DEPRECATED */ + BPF_SKB_CLOCK_REALTIME = 0, + BPF_SKB_CLOCK_MONOTONIC = 1, + BPF_SKB_CLOCK_TAI = 2, + /* For any future BPF_SKB_CLOCK_* that the bpf prog cannot handle, + * the bpf prog can try to deduce it by ingress/egress/skb->sk->sk_clockid. + */ +}; + +/* user accessible mirror of in-kernel sk_buff. + * new fields can only be added to the end of this structure + */ +struct __sk_buff { + __u32 len; + __u32 pkt_type; + __u32 mark; + __u32 queue_mapping; + __u32 protocol; + __u32 vlan_present; + __u32 vlan_tci; + __u32 vlan_proto; + __u32 priority; + __u32 ingress_ifindex; + __u32 ifindex; + __u32 tc_index; + __u32 cb[5]; + __u32 hash; + __u32 tc_classid; + __u32 data; + __u32 data_end; + __u32 napi_id; + + /* Accessed by BPF_PROG_TYPE_sk_skb types from here to ... */ + __u32 family; + __u32 remote_ip4; /* Stored in network byte order */ + __u32 local_ip4; /* Stored in network byte order */ + __u32 remote_ip6[4]; /* Stored in network byte order */ + __u32 local_ip6[4]; /* Stored in network byte order */ + __u32 remote_port; /* Stored in network byte order */ + __u32 local_port; /* stored in host byte order */ + /* ... here. */ + + __u32 data_meta; + __bpf_md_ptr(struct bpf_flow_keys *, flow_keys); + __u64 tstamp; + __u32 wire_len; + __u32 gso_segs; + __bpf_md_ptr(struct bpf_sock *, sk); + __u32 gso_size; + __u8 tstamp_type; + __u32 :24; /* Padding, future use. */ + __u64 hwtstamp; +}; + +struct bpf_tunnel_key { + __u32 tunnel_id; + union { + __u32 remote_ipv4; + __u32 remote_ipv6[4]; + }; + __u8 tunnel_tos; + __u8 tunnel_ttl; + union { + __u16 tunnel_ext; /* compat */ + __be16 tunnel_flags; + }; + __u32 tunnel_label; + union { + __u32 local_ipv4; + __u32 local_ipv6[4]; + }; +}; + +/* user accessible mirror of in-kernel xfrm_state. + * new fields can only be added to the end of this structure + */ +struct bpf_xfrm_state { + __u32 reqid; + __u32 spi; /* Stored in network byte order */ + __u16 family; + __u16 ext; /* Padding, future use. */ + union { + __u32 remote_ipv4; /* Stored in network byte order */ + __u32 remote_ipv6[4]; /* Stored in network byte order */ + }; +}; + +/* Generic BPF return codes which all BPF program types may support. + * The values are binary compatible with their TC_ACT_* counter-part to + * provide backwards compatibility with existing SCHED_CLS and SCHED_ACT + * programs. + * + * XDP is handled seprately, see XDP_*. + */ +enum bpf_ret_code { + BPF_OK = 0, + /* 1 reserved */ + BPF_DROP = 2, + /* 3-6 reserved */ + BPF_REDIRECT = 7, + /* >127 are reserved for prog type specific return codes. + * + * BPF_LWT_REROUTE: used by BPF_PROG_TYPE_LWT_IN and + * BPF_PROG_TYPE_LWT_XMIT to indicate that skb had been + * changed and should be routed based on its new L3 header. + * (This is an L3 redirect, as opposed to L2 redirect + * represented by BPF_REDIRECT above). + */ + BPF_LWT_REROUTE = 128, + /* BPF_FLOW_DISSECTOR_CONTINUE: used by BPF_PROG_TYPE_FLOW_DISSECTOR + * to indicate that no custom dissection was performed, and + * fallback to standard dissector is requested. + */ + BPF_FLOW_DISSECTOR_CONTINUE = 129, +}; + +struct bpf_sock { + __u32 bound_dev_if; + __u32 family; + __u32 type; + __u32 protocol; + __u32 mark; + __u32 priority; + /* IP address also allows 1 and 2 bytes access */ + __u32 src_ip4; + __u32 src_ip6[4]; + __u32 src_port; /* host byte order */ + __be16 dst_port; /* network byte order */ + __u16 :16; /* zero padding */ + __u32 dst_ip4; + __u32 dst_ip6[4]; + __u32 state; + __s32 rx_queue_mapping; +}; + +struct bpf_tcp_sock { + __u32 snd_cwnd; /* Sending congestion window */ + __u32 srtt_us; /* smoothed round trip time << 3 in usecs */ + __u32 rtt_min; + __u32 snd_ssthresh; /* Slow start size threshold */ + __u32 rcv_nxt; /* What we want to receive next */ + __u32 snd_nxt; /* Next sequence we send */ + __u32 snd_una; /* First byte we want an ack for */ + __u32 mss_cache; /* Cached effective mss, not including SACKS */ + __u32 ecn_flags; /* ECN status bits. */ + __u32 rate_delivered; /* saved rate sample: packets delivered */ + __u32 rate_interval_us; /* saved rate sample: time elapsed */ + __u32 packets_out; /* Packets which are "in flight" */ + __u32 retrans_out; /* Retransmitted packets out */ + __u32 total_retrans; /* Total retransmits for entire connection */ + __u32 segs_in; /* RFC4898 tcpEStatsPerfSegsIn + * total number of segments in. + */ + __u32 data_segs_in; /* RFC4898 tcpEStatsPerfDataSegsIn + * total number of data segments in. + */ + __u32 segs_out; /* RFC4898 tcpEStatsPerfSegsOut + * The total number of segments sent. + */ + __u32 data_segs_out; /* RFC4898 tcpEStatsPerfDataSegsOut + * total number of data segments sent. + */ + __u32 lost_out; /* Lost packets */ + __u32 sacked_out; /* SACK'd packets */ + __u64 bytes_received; /* RFC4898 tcpEStatsAppHCThruOctetsReceived + * sum(delta(rcv_nxt)), or how many bytes + * were acked. + */ + __u64 bytes_acked; /* RFC4898 tcpEStatsAppHCThruOctetsAcked + * sum(delta(snd_una)), or how many bytes + * were acked. + */ + __u32 dsack_dups; /* RFC4898 tcpEStatsStackDSACKDups + * total number of DSACK blocks received + */ + __u32 delivered; /* Total data packets delivered incl. rexmits */ + __u32 delivered_ce; /* Like the above but only ECE marked packets */ + __u32 icsk_retransmits; /* Number of unrecovered [RTO] timeouts */ +}; + +struct bpf_sock_tuple { + union { + struct { + __be32 saddr; + __be32 daddr; + __be16 sport; + __be16 dport; + } ipv4; + struct { + __be32 saddr[4]; + __be32 daddr[4]; + __be16 sport; + __be16 dport; + } ipv6; + }; +}; + +/* (Simplified) user return codes for tcx prog type. + * A valid tcx program must return one of these defined values. All other + * return codes are reserved for future use. Must remain compatible with + * their TC_ACT_* counter-parts. For compatibility in behavior, unknown + * return codes are mapped to TCX_NEXT. + */ +enum tcx_action_base { + TCX_NEXT = -1, + TCX_PASS = 0, + TCX_DROP = 2, + TCX_REDIRECT = 7, +}; + +struct bpf_xdp_sock { + __u32 queue_id; +}; + +#define XDP_PACKET_HEADROOM 256 + +/* User return codes for XDP prog type. + * A valid XDP program must return one of these defined values. All other + * return codes are reserved for future use. Unknown return codes will + * result in packet drops and a warning via bpf_warn_invalid_xdp_action(). + */ +enum xdp_action { + XDP_ABORTED = 0, + XDP_DROP, + XDP_PASS, + XDP_TX, + XDP_REDIRECT, +}; + +/* user accessible metadata for XDP packet hook + * new fields must be added to the end of this structure + */ +struct xdp_md { + __u32 data; + __u32 data_end; + __u32 data_meta; + /* Below access go through struct xdp_rxq_info */ + __u32 ingress_ifindex; /* rxq->dev->ifindex */ + __u32 rx_queue_index; /* rxq->queue_index */ + + __u32 egress_ifindex; /* txq->dev->ifindex */ +}; + +/* DEVMAP map-value layout + * + * The struct data-layout of map-value is a configuration interface. + * New members can only be added to the end of this structure. + */ +struct bpf_devmap_val { + __u32 ifindex; /* device index */ + union { + int fd; /* prog fd on map write */ + __u32 id; /* prog id on map read */ + } bpf_prog; +}; + +/* CPUMAP map-value layout + * + * The struct data-layout of map-value is a configuration interface. + * New members can only be added to the end of this structure. + */ +struct bpf_cpumap_val { + __u32 qsize; /* queue size to remote target CPU */ + union { + int fd; /* prog fd on map write */ + __u32 id; /* prog id on map read */ + } bpf_prog; +}; + +enum sk_action { + SK_DROP = 0, + SK_PASS, +}; + +/* user accessible metadata for SK_MSG packet hook, new fields must + * be added to the end of this structure + */ +struct sk_msg_md { + __bpf_md_ptr(void *, data); + __bpf_md_ptr(void *, data_end); + + __u32 family; + __u32 remote_ip4; /* Stored in network byte order */ + __u32 local_ip4; /* Stored in network byte order */ + __u32 remote_ip6[4]; /* Stored in network byte order */ + __u32 local_ip6[4]; /* Stored in network byte order */ + __u32 remote_port; /* Stored in network byte order */ + __u32 local_port; /* stored in host byte order */ + __u32 size; /* Total size of sk_msg */ + + __bpf_md_ptr(struct bpf_sock *, sk); /* current socket */ +}; + +struct sk_reuseport_md { + /* + * Start of directly accessible data. It begins from + * the tcp/udp header. + */ + __bpf_md_ptr(void *, data); + /* End of directly accessible data */ + __bpf_md_ptr(void *, data_end); + /* + * Total length of packet (starting from the tcp/udp header). + * Note that the directly accessible bytes (data_end - data) + * could be less than this "len". Those bytes could be + * indirectly read by a helper "bpf_skb_load_bytes()". + */ + __u32 len; + /* + * Eth protocol in the mac header (network byte order). e.g. + * ETH_P_IP(0x0800) and ETH_P_IPV6(0x86DD) + */ + __u32 eth_protocol; + __u32 ip_protocol; /* IP protocol. e.g. IPPROTO_TCP, IPPROTO_UDP */ + __u32 bind_inany; /* Is sock bound to an INANY address? */ + __u32 hash; /* A hash of the packet 4 tuples */ + /* When reuse->migrating_sk is NULL, it is selecting a sk for the + * new incoming connection request (e.g. selecting a listen sk for + * the received SYN in the TCP case). reuse->sk is one of the sk + * in the reuseport group. The bpf prog can use reuse->sk to learn + * the local listening ip/port without looking into the skb. + * + * When reuse->migrating_sk is not NULL, reuse->sk is closed and + * reuse->migrating_sk is the socket that needs to be migrated + * to another listening socket. migrating_sk could be a fullsock + * sk that is fully established or a reqsk that is in-the-middle + * of 3-way handshake. + */ + __bpf_md_ptr(struct bpf_sock *, sk); + __bpf_md_ptr(struct bpf_sock *, migrating_sk); +}; + +#define BPF_TAG_SIZE 8 + +struct bpf_prog_info { + __u32 type; + __u32 id; + __u8 tag[BPF_TAG_SIZE]; + __u32 jited_prog_len; + __u32 xlated_prog_len; + __aligned_u64 jited_prog_insns; + __aligned_u64 xlated_prog_insns; + __u64 load_time; /* ns since boottime */ + __u32 created_by_uid; + __u32 nr_map_ids; + __aligned_u64 map_ids; + char name[BPF_OBJ_NAME_LEN]; + __u32 ifindex; + __u32 gpl_compatible:1; + __u32 :31; /* alignment pad */ + __u64 netns_dev; + __u64 netns_ino; + __u32 nr_jited_ksyms; + __u32 nr_jited_func_lens; + __aligned_u64 jited_ksyms; + __aligned_u64 jited_func_lens; + __u32 btf_id; + __u32 func_info_rec_size; + __aligned_u64 func_info; + __u32 nr_func_info; + __u32 nr_line_info; + __aligned_u64 line_info; + __aligned_u64 jited_line_info; + __u32 nr_jited_line_info; + __u32 line_info_rec_size; + __u32 jited_line_info_rec_size; + __u32 nr_prog_tags; + __aligned_u64 prog_tags; + __u64 run_time_ns; + __u64 run_cnt; + __u64 recursion_misses; + __u32 verified_insns; + __u32 attach_btf_obj_id; + __u32 attach_btf_id; +} __attribute__((aligned(8))); + +struct bpf_map_info { + __u32 type; + __u32 id; + __u32 key_size; + __u32 value_size; + __u32 max_entries; + __u32 map_flags; + char name[BPF_OBJ_NAME_LEN]; + __u32 ifindex; + __u32 btf_vmlinux_value_type_id; + __u64 netns_dev; + __u64 netns_ino; + __u32 btf_id; + __u32 btf_key_type_id; + __u32 btf_value_type_id; + __u32 btf_vmlinux_id; + __u64 map_extra; + __aligned_u64 hash; + __u32 hash_size; +} __attribute__((aligned(8))); + +struct bpf_btf_info { + __aligned_u64 btf; + __u32 btf_size; + __u32 id; + __aligned_u64 name; + __u32 name_len; + __u32 kernel_btf; +} __attribute__((aligned(8))); + +struct bpf_link_info { + __u32 type; + __u32 id; + __u32 prog_id; + union { + struct { + __aligned_u64 tp_name; /* in/out: tp_name buffer ptr */ + __u32 tp_name_len; /* in/out: tp_name buffer len */ + __u32 :32; + __u64 cookie; + } raw_tracepoint; + struct { + __u32 attach_type; + __u32 target_obj_id; /* prog_id for PROG_EXT, otherwise btf object id */ + __u32 target_btf_id; /* BTF type id inside the object */ + __u32 :32; + __u64 cookie; + } tracing; + struct { + __u64 cgroup_id; + __u32 attach_type; + } cgroup; + struct { + __aligned_u64 target_name; /* in/out: target_name buffer ptr */ + __u32 target_name_len; /* in/out: target_name buffer len */ + + /* If the iter specific field is 32 bits, it can be put + * in the first or second union. Otherwise it should be + * put in the second union. + */ + union { + struct { + __u32 map_id; + } map; + }; + union { + struct { + __u64 cgroup_id; + __u32 order; + } cgroup; + struct { + __u32 tid; + __u32 pid; + } task; + }; + } iter; + struct { + __u32 netns_ino; + __u32 attach_type; + } netns; + struct { + __u32 ifindex; + } xdp; + struct { + __u32 map_id; + } struct_ops; + struct { + __u32 pf; + __u32 hooknum; + __s32 priority; + __u32 flags; + } netfilter; + struct { + __aligned_u64 addrs; + __u32 count; /* in/out: kprobe_multi function count */ + __u32 flags; + __u64 missed; + __aligned_u64 cookies; + } kprobe_multi; + struct { + __aligned_u64 path; + __aligned_u64 offsets; + __aligned_u64 ref_ctr_offsets; + __aligned_u64 cookies; + __u32 path_size; /* in/out: real path size on success, including zero byte */ + __u32 count; /* in/out: uprobe_multi offsets/ref_ctr_offsets/cookies count */ + __u32 flags; + __u32 pid; + } uprobe_multi; + struct { + __u32 type; /* enum bpf_perf_event_type */ + __u32 :32; + union { + struct { + __aligned_u64 file_name; /* in/out */ + __u32 name_len; + __u32 offset; /* offset from file_name */ + __u64 cookie; + __u64 ref_ctr_offset; + } uprobe; /* BPF_PERF_EVENT_UPROBE, BPF_PERF_EVENT_URETPROBE */ + struct { + __aligned_u64 func_name; /* in/out */ + __u32 name_len; + __u32 offset; /* offset from func_name */ + __u64 addr; + __u64 missed; + __u64 cookie; + } kprobe; /* BPF_PERF_EVENT_KPROBE, BPF_PERF_EVENT_KRETPROBE */ + struct { + __aligned_u64 tp_name; /* in/out */ + __u32 name_len; + __u32 :32; + __u64 cookie; + } tracepoint; /* BPF_PERF_EVENT_TRACEPOINT */ + struct { + __u64 config; + __u32 type; + __u32 :32; + __u64 cookie; + } event; /* BPF_PERF_EVENT_EVENT */ + }; + } perf_event; + struct { + __u32 ifindex; + __u32 attach_type; + } tcx; + struct { + __u32 ifindex; + __u32 attach_type; + } netkit; + struct { + __u32 map_id; + __u32 attach_type; + } sockmap; + }; +} __attribute__((aligned(8))); + +struct bpf_token_info { + __u64 allowed_cmds; + __u64 allowed_maps; + __u64 allowed_progs; + __u64 allowed_attachs; +} __attribute__((aligned(8))); + +/* User bpf_sock_addr struct to access socket fields and sockaddr struct passed + * by user and intended to be used by socket (e.g. to bind to, depends on + * attach type). + */ +struct bpf_sock_addr { + __u32 user_family; /* Allows 4-byte read, but no write. */ + __u32 user_ip4; /* Allows 1,2,4-byte read and 4-byte write. + * Stored in network byte order. + */ + __u32 user_ip6[4]; /* Allows 1,2,4,8-byte read and 4,8-byte write. + * Stored in network byte order. + */ + __u32 user_port; /* Allows 1,2,4-byte read and 4-byte write. + * Stored in network byte order + */ + __u32 family; /* Allows 4-byte read, but no write */ + __u32 type; /* Allows 4-byte read, but no write */ + __u32 protocol; /* Allows 4-byte read, but no write */ + __u32 msg_src_ip4; /* Allows 1,2,4-byte read and 4-byte write. + * Stored in network byte order. + */ + __u32 msg_src_ip6[4]; /* Allows 1,2,4,8-byte read and 4,8-byte write. + * Stored in network byte order. + */ + __bpf_md_ptr(struct bpf_sock *, sk); +}; + +/* User bpf_sock_ops struct to access socket values and specify request ops + * and their replies. + * Some of this fields are in network (bigendian) byte order and may need + * to be converted before use (bpf_ntohl() defined in samples/bpf/bpf_endian.h). + * New fields can only be added at the end of this structure + */ +struct bpf_sock_ops { + __u32 op; + union { + __u32 args[4]; /* Optionally passed to bpf program */ + __u32 reply; /* Returned by bpf program */ + __u32 replylong[4]; /* Optionally returned by bpf prog */ + }; + __u32 family; + __u32 remote_ip4; /* Stored in network byte order */ + __u32 local_ip4; /* Stored in network byte order */ + __u32 remote_ip6[4]; /* Stored in network byte order */ + __u32 local_ip6[4]; /* Stored in network byte order */ + __u32 remote_port; /* Stored in network byte order */ + __u32 local_port; /* stored in host byte order */ + __u32 is_fullsock; /* Some TCP fields are only valid if + * there is a full socket. If not, the + * fields read as zero. + */ + __u32 snd_cwnd; + __u32 srtt_us; /* Averaged RTT << 3 in usecs */ + __u32 bpf_sock_ops_cb_flags; /* flags defined in uapi/linux/tcp.h */ + __u32 state; + __u32 rtt_min; + __u32 snd_ssthresh; + __u32 rcv_nxt; + __u32 snd_nxt; + __u32 snd_una; + __u32 mss_cache; + __u32 ecn_flags; + __u32 rate_delivered; + __u32 rate_interval_us; + __u32 packets_out; + __u32 retrans_out; + __u32 total_retrans; + __u32 segs_in; + __u32 data_segs_in; + __u32 segs_out; + __u32 data_segs_out; + __u32 lost_out; + __u32 sacked_out; + __u32 sk_txhash; + __u64 bytes_received; + __u64 bytes_acked; + __bpf_md_ptr(struct bpf_sock *, sk); + /* [skb_data, skb_data_end) covers the whole TCP header. + * + * BPF_SOCK_OPS_PARSE_HDR_OPT_CB: The packet received + * BPF_SOCK_OPS_HDR_OPT_LEN_CB: Not useful because the + * header has not been written. + * BPF_SOCK_OPS_WRITE_HDR_OPT_CB: The header and options have + * been written so far. + * BPF_SOCK_OPS_ACTIVE_ESTABLISHED_CB: The SYNACK that concludes + * the 3WHS. + * BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB: The ACK that concludes + * the 3WHS. + * + * bpf_load_hdr_opt() can also be used to read a particular option. + */ + __bpf_md_ptr(void *, skb_data); + __bpf_md_ptr(void *, skb_data_end); + __u32 skb_len; /* The total length of a packet. + * It includes the header, options, + * and payload. + */ + __u32 skb_tcp_flags; /* tcp_flags of the header. It provides + * an easy way to check for tcp_flags + * without parsing skb_data. + * + * In particular, the skb_tcp_flags + * will still be available in + * BPF_SOCK_OPS_HDR_OPT_LEN even though + * the outgoing header has not + * been written yet. + */ + __u64 skb_hwtstamp; +}; + +/* Definitions for bpf_sock_ops_cb_flags */ +enum { + BPF_SOCK_OPS_RTO_CB_FLAG = (1<<0), + BPF_SOCK_OPS_RETRANS_CB_FLAG = (1<<1), + BPF_SOCK_OPS_STATE_CB_FLAG = (1<<2), + BPF_SOCK_OPS_RTT_CB_FLAG = (1<<3), + /* Call bpf for all received TCP headers. The bpf prog will be + * called under sock_ops->op == BPF_SOCK_OPS_PARSE_HDR_OPT_CB + * + * Please refer to the comment in BPF_SOCK_OPS_PARSE_HDR_OPT_CB + * for the header option related helpers that will be useful + * to the bpf programs. + * + * It could be used at the client/active side (i.e. connect() side) + * when the server told it that the server was in syncookie + * mode and required the active side to resend the bpf-written + * options. The active side can keep writing the bpf-options until + * it received a valid packet from the server side to confirm + * the earlier packet (and options) has been received. The later + * example patch is using it like this at the active side when the + * server is in syncookie mode. + * + * The bpf prog will usually turn this off in the common cases. + */ + BPF_SOCK_OPS_PARSE_ALL_HDR_OPT_CB_FLAG = (1<<4), + /* Call bpf when kernel has received a header option that + * the kernel cannot handle. The bpf prog will be called under + * sock_ops->op == BPF_SOCK_OPS_PARSE_HDR_OPT_CB. + * + * Please refer to the comment in BPF_SOCK_OPS_PARSE_HDR_OPT_CB + * for the header option related helpers that will be useful + * to the bpf programs. + */ + BPF_SOCK_OPS_PARSE_UNKNOWN_HDR_OPT_CB_FLAG = (1<<5), + /* Call bpf when the kernel is writing header options for the + * outgoing packet. The bpf prog will first be called + * to reserve space in a skb under + * sock_ops->op == BPF_SOCK_OPS_HDR_OPT_LEN_CB. Then + * the bpf prog will be called to write the header option(s) + * under sock_ops->op == BPF_SOCK_OPS_WRITE_HDR_OPT_CB. + * + * Please refer to the comment in BPF_SOCK_OPS_HDR_OPT_LEN_CB + * and BPF_SOCK_OPS_WRITE_HDR_OPT_CB for the header option + * related helpers that will be useful to the bpf programs. + * + * The kernel gets its chance to reserve space and write + * options first before the BPF program does. + */ + BPF_SOCK_OPS_WRITE_HDR_OPT_CB_FLAG = (1<<6), +/* Mask of all currently supported cb flags */ + BPF_SOCK_OPS_ALL_CB_FLAGS = 0x7F, +}; + +enum { + SK_BPF_CB_TX_TIMESTAMPING = 1<<0, + SK_BPF_CB_MASK = (SK_BPF_CB_TX_TIMESTAMPING - 1) | + SK_BPF_CB_TX_TIMESTAMPING +}; + +/* List of known BPF sock_ops operators. + * New entries can only be added at the end + */ +enum { + BPF_SOCK_OPS_VOID, + BPF_SOCK_OPS_TIMEOUT_INIT, /* Should return SYN-RTO value to use or + * -1 if default value should be used + */ + BPF_SOCK_OPS_RWND_INIT, /* Should return initial advertized + * window (in packets) or -1 if default + * value should be used + */ + BPF_SOCK_OPS_TCP_CONNECT_CB, /* Calls BPF program right before an + * active connection is initialized + */ + BPF_SOCK_OPS_ACTIVE_ESTABLISHED_CB, /* Calls BPF program when an + * active connection is + * established + */ + BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB, /* Calls BPF program when a + * passive connection is + * established + */ + BPF_SOCK_OPS_NEEDS_ECN, /* If connection's congestion control + * needs ECN + */ + BPF_SOCK_OPS_BASE_RTT, /* Get base RTT. The correct value is + * based on the path and may be + * dependent on the congestion control + * algorithm. In general it indicates + * a congestion threshold. RTTs above + * this indicate congestion + */ + BPF_SOCK_OPS_RTO_CB, /* Called when an RTO has triggered. + * Arg1: value of icsk_retransmits + * Arg2: value of icsk_rto + * Arg3: whether RTO has expired + */ + BPF_SOCK_OPS_RETRANS_CB, /* Called when skb is retransmitted. + * Arg1: sequence number of 1st byte + * Arg2: # segments + * Arg3: return value of + * tcp_transmit_skb (0 => success) + */ + BPF_SOCK_OPS_STATE_CB, /* Called when TCP changes state. + * Arg1: old_state + * Arg2: new_state + */ + BPF_SOCK_OPS_TCP_LISTEN_CB, /* Called on listen(2), right after + * socket transition to LISTEN state. + */ + BPF_SOCK_OPS_RTT_CB, /* Called on every RTT. + * Arg1: measured RTT input (mrtt) + * Arg2: updated srtt + */ + BPF_SOCK_OPS_PARSE_HDR_OPT_CB, /* Parse the header option. + * It will be called to handle + * the packets received at + * an already established + * connection. + * + * sock_ops->skb_data: + * Referring to the received skb. + * It covers the TCP header only. + * + * bpf_load_hdr_opt() can also + * be used to search for a + * particular option. + */ + BPF_SOCK_OPS_HDR_OPT_LEN_CB, /* Reserve space for writing the + * header option later in + * BPF_SOCK_OPS_WRITE_HDR_OPT_CB. + * Arg1: bool want_cookie. (in + * writing SYNACK only) + * + * sock_ops->skb_data: + * Not available because no header has + * been written yet. + * + * sock_ops->skb_tcp_flags: + * The tcp_flags of the + * outgoing skb. (e.g. SYN, ACK, FIN). + * + * bpf_reserve_hdr_opt() should + * be used to reserve space. + */ + BPF_SOCK_OPS_WRITE_HDR_OPT_CB, /* Write the header options + * Arg1: bool want_cookie. (in + * writing SYNACK only) + * + * sock_ops->skb_data: + * Referring to the outgoing skb. + * It covers the TCP header + * that has already been written + * by the kernel and the + * earlier bpf-progs. + * + * sock_ops->skb_tcp_flags: + * The tcp_flags of the outgoing + * skb. (e.g. SYN, ACK, FIN). + * + * bpf_store_hdr_opt() should + * be used to write the + * option. + * + * bpf_load_hdr_opt() can also + * be used to search for a + * particular option that + * has already been written + * by the kernel or the + * earlier bpf-progs. + */ + BPF_SOCK_OPS_TSTAMP_SCHED_CB, /* Called when skb is passing + * through dev layer when + * SK_BPF_CB_TX_TIMESTAMPING + * feature is on. + */ + BPF_SOCK_OPS_TSTAMP_SND_SW_CB, /* Called when skb is about to send + * to the nic when SK_BPF_CB_TX_TIMESTAMPING + * feature is on. + */ + BPF_SOCK_OPS_TSTAMP_SND_HW_CB, /* Called in hardware phase when + * SK_BPF_CB_TX_TIMESTAMPING feature + * is on. + */ + BPF_SOCK_OPS_TSTAMP_ACK_CB, /* Called when all the skbs in the + * same sendmsg call are acked + * when SK_BPF_CB_TX_TIMESTAMPING + * feature is on. + */ + BPF_SOCK_OPS_TSTAMP_SENDMSG_CB, /* Called when every sendmsg syscall + * is triggered. It's used to correlate + * sendmsg timestamp with corresponding + * tskey. + */ +}; + +/* List of TCP states. There is a build check in net/ipv4/tcp.c to detect + * changes between the TCP and BPF versions. Ideally this should never happen. + * If it does, we need to add code to convert them before calling + * the BPF sock_ops function. + */ +enum { + BPF_TCP_ESTABLISHED = 1, + BPF_TCP_SYN_SENT, + BPF_TCP_SYN_RECV, + BPF_TCP_FIN_WAIT1, + BPF_TCP_FIN_WAIT2, + BPF_TCP_TIME_WAIT, + BPF_TCP_CLOSE, + BPF_TCP_CLOSE_WAIT, + BPF_TCP_LAST_ACK, + BPF_TCP_LISTEN, + BPF_TCP_CLOSING, /* Now a valid state */ + BPF_TCP_NEW_SYN_RECV, + BPF_TCP_BOUND_INACTIVE, + + BPF_TCP_MAX_STATES /* Leave at the end! */ +}; + +enum { + TCP_BPF_IW = 1001, /* Set TCP initial congestion window */ + TCP_BPF_SNDCWND_CLAMP = 1002, /* Set sndcwnd_clamp */ + TCP_BPF_DELACK_MAX = 1003, /* Max delay ack in usecs */ + TCP_BPF_RTO_MIN = 1004, /* Min delay ack in usecs */ + /* Copy the SYN pkt to optval + * + * BPF_PROG_TYPE_SOCK_OPS only. It is similar to the + * bpf_getsockopt(TCP_SAVED_SYN) but it does not limit + * to only getting from the saved_syn. It can either get the + * syn packet from: + * + * 1. the just-received SYN packet (only available when writing the + * SYNACK). It will be useful when it is not necessary to + * save the SYN packet for latter use. It is also the only way + * to get the SYN during syncookie mode because the syn + * packet cannot be saved during syncookie. + * + * OR + * + * 2. the earlier saved syn which was done by + * bpf_setsockopt(TCP_SAVE_SYN). + * + * The bpf_getsockopt(TCP_BPF_SYN*) option will hide where the + * SYN packet is obtained. + * + * If the bpf-prog does not need the IP[46] header, the + * bpf-prog can avoid parsing the IP header by using + * TCP_BPF_SYN. Otherwise, the bpf-prog can get both + * IP[46] and TCP header by using TCP_BPF_SYN_IP. + * + * >0: Total number of bytes copied + * -ENOSPC: Not enough space in optval. Only optlen number of + * bytes is copied. + * -ENOENT: The SYN skb is not available now and the earlier SYN pkt + * is not saved by setsockopt(TCP_SAVE_SYN). + */ + TCP_BPF_SYN = 1005, /* Copy the TCP header */ + TCP_BPF_SYN_IP = 1006, /* Copy the IP[46] and TCP header */ + TCP_BPF_SYN_MAC = 1007, /* Copy the MAC, IP[46], and TCP header */ + TCP_BPF_SOCK_OPS_CB_FLAGS = 1008, /* Get or Set TCP sock ops flags */ + SK_BPF_CB_FLAGS = 1009, /* Get or set sock ops flags in socket */ + SK_BPF_BYPASS_PROT_MEM = 1010, /* Get or Set sk->sk_bypass_prot_mem */ +}; + +enum { + BPF_LOAD_HDR_OPT_TCP_SYN = (1ULL << 0), +}; + +/* args[0] value during BPF_SOCK_OPS_HDR_OPT_LEN_CB and + * BPF_SOCK_OPS_WRITE_HDR_OPT_CB. + */ +enum { + BPF_WRITE_HDR_TCP_CURRENT_MSS = 1, /* Kernel is finding the + * total option spaces + * required for an established + * sk in order to calculate the + * MSS. No skb is actually + * sent. + */ + BPF_WRITE_HDR_TCP_SYNACK_COOKIE = 2, /* Kernel is in syncookie mode + * when sending a SYN. + */ +}; + +struct bpf_perf_event_value { + __u64 counter; + __u64 enabled; + __u64 running; +}; + +enum { + BPF_DEVCG_ACC_MKNOD = (1ULL << 0), + BPF_DEVCG_ACC_READ = (1ULL << 1), + BPF_DEVCG_ACC_WRITE = (1ULL << 2), +}; + +enum { + BPF_DEVCG_DEV_BLOCK = (1ULL << 0), + BPF_DEVCG_DEV_CHAR = (1ULL << 1), +}; + +struct bpf_cgroup_dev_ctx { + /* access_type encoded as (BPF_DEVCG_ACC_* << 16) | BPF_DEVCG_DEV_* */ + __u32 access_type; + __u32 major; + __u32 minor; +}; + +struct bpf_raw_tracepoint_args { + __u64 args[0]; +}; + +/* DIRECT: Skip the FIB rules and go to FIB table associated with device + * OUTPUT: Do lookup from egress perspective; default is ingress + */ +enum { + BPF_FIB_LOOKUP_DIRECT = (1U << 0), + BPF_FIB_LOOKUP_OUTPUT = (1U << 1), + BPF_FIB_LOOKUP_SKIP_NEIGH = (1U << 2), + BPF_FIB_LOOKUP_TBID = (1U << 3), + BPF_FIB_LOOKUP_SRC = (1U << 4), + BPF_FIB_LOOKUP_MARK = (1U << 5), +}; + +enum { + BPF_FIB_LKUP_RET_SUCCESS, /* lookup successful */ + BPF_FIB_LKUP_RET_BLACKHOLE, /* dest is blackholed; can be dropped */ + BPF_FIB_LKUP_RET_UNREACHABLE, /* dest is unreachable; can be dropped */ + BPF_FIB_LKUP_RET_PROHIBIT, /* dest not allowed; can be dropped */ + BPF_FIB_LKUP_RET_NOT_FWDED, /* packet is not forwarded */ + BPF_FIB_LKUP_RET_FWD_DISABLED, /* fwding is not enabled on ingress */ + BPF_FIB_LKUP_RET_UNSUPP_LWT, /* fwd requires encapsulation */ + BPF_FIB_LKUP_RET_NO_NEIGH, /* no neighbor entry for nh */ + BPF_FIB_LKUP_RET_FRAG_NEEDED, /* fragmentation required to fwd */ + BPF_FIB_LKUP_RET_NO_SRC_ADDR, /* failed to derive IP src addr */ +}; + +struct bpf_fib_lookup { + /* input: network family for lookup (AF_INET, AF_INET6) + * output: network family of egress nexthop + */ + __u8 family; + + /* set if lookup is to consider L4 data - e.g., FIB rules */ + __u8 l4_protocol; + __be16 sport; + __be16 dport; + + union { /* used for MTU check */ + /* input to lookup */ + __u16 tot_len; /* L3 length from network hdr (iph->tot_len) */ + + /* output: MTU value */ + __u16 mtu_result; + } __attribute__((packed, aligned(2))); + /* input: L3 device index for lookup + * output: device index from FIB lookup + */ + __u32 ifindex; + + union { + /* inputs to lookup */ + __u8 tos; /* AF_INET */ + __be32 flowinfo; /* AF_INET6, flow_label + priority */ + + /* output: metric of fib result (IPv4/IPv6 only) */ + __u32 rt_metric; + }; + + /* input: source address to consider for lookup + * output: source address result from lookup + */ + union { + __be32 ipv4_src; + __u32 ipv6_src[4]; /* in6_addr; network order */ + }; + + /* input to bpf_fib_lookup, ipv{4,6}_dst is destination address in + * network header. output: bpf_fib_lookup sets to gateway address + * if FIB lookup returns gateway route + */ + union { + __be32 ipv4_dst; + __u32 ipv6_dst[4]; /* in6_addr; network order */ + }; + + union { + struct { + /* output */ + __be16 h_vlan_proto; + __be16 h_vlan_TCI; + }; + /* input: when accompanied with the + * 'BPF_FIB_LOOKUP_DIRECT | BPF_FIB_LOOKUP_TBID` flags, a + * specific routing table to use for the fib lookup. + */ + __u32 tbid; + }; + + union { + /* input */ + struct { + __u32 mark; /* policy routing */ + /* 2 4-byte holes for input */ + }; + + /* output: source and dest mac */ + struct { + __u8 smac[6]; /* ETH_ALEN */ + __u8 dmac[6]; /* ETH_ALEN */ + }; + }; +}; + +struct bpf_redir_neigh { + /* network family for lookup (AF_INET, AF_INET6) */ + __u32 nh_family; + /* network address of nexthop; skips fib lookup to find gateway */ + union { + __be32 ipv4_nh; + __u32 ipv6_nh[4]; /* in6_addr; network order */ + }; +}; + +/* bpf_check_mtu flags*/ +enum bpf_check_mtu_flags { + BPF_MTU_CHK_SEGS = (1U << 0), +}; + +enum bpf_check_mtu_ret { + BPF_MTU_CHK_RET_SUCCESS, /* check and lookup successful */ + BPF_MTU_CHK_RET_FRAG_NEEDED, /* fragmentation required to fwd */ + BPF_MTU_CHK_RET_SEGS_TOOBIG, /* GSO re-segmentation needed to fwd */ +}; + +enum bpf_task_fd_type { + BPF_FD_TYPE_RAW_TRACEPOINT, /* tp name */ + BPF_FD_TYPE_TRACEPOINT, /* tp name */ + BPF_FD_TYPE_KPROBE, /* (symbol + offset) or addr */ + BPF_FD_TYPE_KRETPROBE, /* (symbol + offset) or addr */ + BPF_FD_TYPE_UPROBE, /* filename + offset */ + BPF_FD_TYPE_URETPROBE, /* filename + offset */ +}; + +enum { + BPF_FLOW_DISSECTOR_F_PARSE_1ST_FRAG = (1U << 0), + BPF_FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL = (1U << 1), + BPF_FLOW_DISSECTOR_F_STOP_AT_ENCAP = (1U << 2), +}; + +struct bpf_flow_keys { + __u16 nhoff; + __u16 thoff; + __u16 addr_proto; /* ETH_P_* of valid addrs */ + __u8 is_frag; + __u8 is_first_frag; + __u8 is_encap; + __u8 ip_proto; + __be16 n_proto; + __be16 sport; + __be16 dport; + union { + struct { + __be32 ipv4_src; + __be32 ipv4_dst; + }; + struct { + __u32 ipv6_src[4]; /* in6_addr; network order */ + __u32 ipv6_dst[4]; /* in6_addr; network order */ + }; + }; + __u32 flags; + __be32 flow_label; +}; + +struct bpf_func_info { + __u32 insn_off; + __u32 type_id; +}; + +#define BPF_LINE_INFO_LINE_NUM(line_col) ((line_col) >> 10) +#define BPF_LINE_INFO_LINE_COL(line_col) ((line_col) & 0x3ff) + +struct bpf_line_info { + __u32 insn_off; + __u32 file_name_off; + __u32 line_off; + __u32 line_col; +}; + +struct bpf_spin_lock { + __u32 val; +}; + +struct bpf_timer { + __u64 __opaque[2]; +} __attribute__((aligned(8))); + +struct bpf_task_work { + __u64 __opaque; +} __attribute__((aligned(8))); + +struct bpf_wq { + __u64 __opaque[2]; +} __attribute__((aligned(8))); + +struct bpf_dynptr { + __u64 __opaque[2]; +} __attribute__((aligned(8))); + +struct bpf_list_head { + __u64 __opaque[2]; +} __attribute__((aligned(8))); + +struct bpf_list_node { + __u64 __opaque[3]; +} __attribute__((aligned(8))); + +struct bpf_rb_root { + __u64 __opaque[2]; +} __attribute__((aligned(8))); + +struct bpf_rb_node { + __u64 __opaque[4]; +} __attribute__((aligned(8))); + +struct bpf_refcount { + __u32 __opaque[1]; +} __attribute__((aligned(4))); + +struct bpf_sysctl { + __u32 write; /* Sysctl is being read (= 0) or written (= 1). + * Allows 1,2,4-byte read, but no write. + */ + __u32 file_pos; /* Sysctl file position to read from, write to. + * Allows 1,2,4-byte read an 4-byte write. + */ +}; + +struct bpf_sockopt { + __bpf_md_ptr(struct bpf_sock *, sk); + __bpf_md_ptr(void *, optval); + __bpf_md_ptr(void *, optval_end); + + __s32 level; + __s32 optname; + __s32 optlen; + __s32 retval; +}; + +struct bpf_pidns_info { + __u32 pid; + __u32 tgid; +}; + +/* User accessible data for SK_LOOKUP programs. Add new fields at the end. */ +struct bpf_sk_lookup { + union { + __bpf_md_ptr(struct bpf_sock *, sk); /* Selected socket */ + __u64 cookie; /* Non-zero if socket was selected in PROG_TEST_RUN */ + }; + + __u32 family; /* Protocol family (AF_INET, AF_INET6) */ + __u32 protocol; /* IP protocol (IPPROTO_TCP, IPPROTO_UDP) */ + __u32 remote_ip4; /* Network byte order */ + __u32 remote_ip6[4]; /* Network byte order */ + __be16 remote_port; /* Network byte order */ + __u16 :16; /* Zero padding */ + __u32 local_ip4; /* Network byte order */ + __u32 local_ip6[4]; /* Network byte order */ + __u32 local_port; /* Host byte order */ + __u32 ingress_ifindex; /* The arriving interface. Determined by inet_iif. */ +}; + +/* + * struct btf_ptr is used for typed pointer representation; the + * type id is used to render the pointer data as the appropriate type + * via the bpf_snprintf_btf() helper described above. A flags field - + * potentially to specify additional details about the BTF pointer + * (rather than its mode of display) - is included for future use. + * Display flags - BTF_F_* - are passed to bpf_snprintf_btf separately. + */ +struct btf_ptr { + void *ptr; + __u32 type_id; + __u32 flags; /* BTF ptr flags; unused at present. */ +}; + +/* + * Flags to control bpf_snprintf_btf() behaviour. + * - BTF_F_COMPACT: no formatting around type information + * - BTF_F_NONAME: no struct/union member names/types + * - BTF_F_PTR_RAW: show raw (unobfuscated) pointer values; + * equivalent to %px. + * - BTF_F_ZERO: show zero-valued struct/union members; they + * are not displayed by default + */ +enum { + BTF_F_COMPACT = (1ULL << 0), + BTF_F_NONAME = (1ULL << 1), + BTF_F_PTR_RAW = (1ULL << 2), + BTF_F_ZERO = (1ULL << 3), +}; + +/* bpf_core_relo_kind encodes which aspect of captured field/type/enum value + * has to be adjusted by relocations. It is emitted by llvm and passed to + * libbpf and later to the kernel. + */ +enum bpf_core_relo_kind { + BPF_CORE_FIELD_BYTE_OFFSET = 0, /* field byte offset */ + BPF_CORE_FIELD_BYTE_SIZE = 1, /* field size in bytes */ + BPF_CORE_FIELD_EXISTS = 2, /* field existence in target kernel */ + BPF_CORE_FIELD_SIGNED = 3, /* field signedness (0 - unsigned, 1 - signed) */ + BPF_CORE_FIELD_LSHIFT_U64 = 4, /* bitfield-specific left bitshift */ + BPF_CORE_FIELD_RSHIFT_U64 = 5, /* bitfield-specific right bitshift */ + BPF_CORE_TYPE_ID_LOCAL = 6, /* type ID in local BPF object */ + BPF_CORE_TYPE_ID_TARGET = 7, /* type ID in target kernel */ + BPF_CORE_TYPE_EXISTS = 8, /* type existence in target kernel */ + BPF_CORE_TYPE_SIZE = 9, /* type size in bytes */ + BPF_CORE_ENUMVAL_EXISTS = 10, /* enum value existence in target kernel */ + BPF_CORE_ENUMVAL_VALUE = 11, /* enum value integer value */ + BPF_CORE_TYPE_MATCHES = 12, /* type match in target kernel */ +}; + +/* + * "struct bpf_core_relo" is used to pass relocation data form LLVM to libbpf + * and from libbpf to the kernel. + * + * CO-RE relocation captures the following data: + * - insn_off - instruction offset (in bytes) within a BPF program that needs + * its insn->imm field to be relocated with actual field info; + * - type_id - BTF type ID of the "root" (containing) entity of a relocatable + * type or field; + * - access_str_off - offset into corresponding .BTF string section. String + * interpretation depends on specific relocation kind: + * - for field-based relocations, string encodes an accessed field using + * a sequence of field and array indices, separated by colon (:). It's + * conceptually very close to LLVM's getelementptr ([0]) instruction's + * arguments for identifying offset to a field. + * - for type-based relocations, strings is expected to be just "0"; + * - for enum value-based relocations, string contains an index of enum + * value within its enum type; + * - kind - one of enum bpf_core_relo_kind; + * + * Example: + * struct sample { + * int a; + * struct { + * int b[10]; + * }; + * }; + * + * struct sample *s = ...; + * int *x = &s->a; // encoded as "0:0" (a is field #0) + * int *y = &s->b[5]; // encoded as "0:1:0:5" (anon struct is field #1, + * // b is field #0 inside anon struct, accessing elem #5) + * int *z = &s[10]->b; // encoded as "10:1" (ptr is used as an array) + * + * type_id for all relocs in this example will capture BTF type id of + * `struct sample`. + * + * Such relocation is emitted when using __builtin_preserve_access_index() + * Clang built-in, passing expression that captures field address, e.g.: + * + * bpf_probe_read(&dst, sizeof(dst), + * __builtin_preserve_access_index(&src->a.b.c)); + * + * In this case Clang will emit field relocation recording necessary data to + * be able to find offset of embedded `a.b.c` field within `src` struct. + * + * [0] https://llvm.org/docs/LangRef.html#getelementptr-instruction + */ +struct bpf_core_relo { + __u32 insn_off; + __u32 type_id; + __u32 access_str_off; + enum bpf_core_relo_kind kind; +}; + +/* + * Flags to control bpf_timer_start() behaviour. + * - BPF_F_TIMER_ABS: Timeout passed is absolute time, by default it is + * relative to current time. + * - BPF_F_TIMER_CPU_PIN: Timer will be pinned to the CPU of the caller. + */ +enum { + BPF_F_TIMER_ABS = (1ULL << 0), + BPF_F_TIMER_CPU_PIN = (1ULL << 1), +}; + +/* BPF numbers iterator state */ +struct bpf_iter_num { + /* opaque iterator state; having __u64 here allows to preserve correct + * alignment requirements in vmlinux.h, generated from BTF + */ + __u64 __opaque[1]; +} __attribute__((aligned(8))); + +/* + * Flags to control BPF kfunc behaviour. + * - BPF_F_PAD_ZEROS: Pad destination buffer with zeros. (See the respective + * helper documentation for details.) + */ +enum bpf_kfunc_flags { + BPF_F_PAD_ZEROS = (1ULL << 0), +}; + +/* + * Values of a BPF_MAP_TYPE_INSN_ARRAY entry must be of this type. + * + * Before the map is used the orig_off field should point to an + * instruction inside the program being loaded. The other fields + * must be set to 0. + * + * After the program is loaded, the xlated_off will be adjusted + * by the verifier to point to the index of the original instruction + * in the xlated program. If the instruction is deleted, it will + * be set to (u32)-1. The jitted_off will be set to the corresponding + * offset in the jitted image of the program. + */ +struct bpf_insn_array_value { + __u32 orig_off; + __u32 xlated_off; + __u32 jitted_off; + __u32 :32; +}; + +#endif /* _UAPI__LINUX_BPF_H__ */ diff --git a/tools/include/uapi/linux/bpf_common.h b/tools/include/uapi/linux/bpf_common.h new file mode 100644 index 000000000000..ee97668bdadb --- /dev/null +++ b/tools/include/uapi/linux/bpf_common.h @@ -0,0 +1,57 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _UAPI__LINUX_BPF_COMMON_H__ +#define _UAPI__LINUX_BPF_COMMON_H__ + +/* Instruction classes */ +#define BPF_CLASS(code) ((code) & 0x07) +#define BPF_LD 0x00 +#define BPF_LDX 0x01 +#define BPF_ST 0x02 +#define BPF_STX 0x03 +#define BPF_ALU 0x04 +#define BPF_JMP 0x05 +#define BPF_RET 0x06 +#define BPF_MISC 0x07 + +/* ld/ldx fields */ +#define BPF_SIZE(code) ((code) & 0x18) +#define BPF_W 0x00 /* 32-bit */ +#define BPF_H 0x08 /* 16-bit */ +#define BPF_B 0x10 /* 8-bit */ +/* eBPF BPF_DW 0x18 64-bit */ +#define BPF_MODE(code) ((code) & 0xe0) +#define BPF_IMM 0x00 +#define BPF_ABS 0x20 +#define BPF_IND 0x40 +#define BPF_MEM 0x60 +#define BPF_LEN 0x80 +#define BPF_MSH 0xa0 + +/* alu/jmp fields */ +#define BPF_OP(code) ((code) & 0xf0) +#define BPF_ADD 0x00 +#define BPF_SUB 0x10 +#define BPF_MUL 0x20 +#define BPF_DIV 0x30 +#define BPF_OR 0x40 +#define BPF_AND 0x50 +#define BPF_LSH 0x60 +#define BPF_RSH 0x70 +#define BPF_NEG 0x80 +#define BPF_MOD 0x90 +#define BPF_XOR 0xa0 + +#define BPF_JA 0x00 +#define BPF_JEQ 0x10 +#define BPF_JGT 0x20 +#define BPF_JGE 0x30 +#define BPF_JSET 0x40 +#define BPF_SRC(code) ((code) & 0x08) +#define BPF_K 0x00 +#define BPF_X 0x08 + +#ifndef BPF_MAXINSNS +#define BPF_MAXINSNS 4096 +#endif + +#endif /* _UAPI__LINUX_BPF_COMMON_H__ */ diff --git a/tools/include/uapi/linux/bpf_perf_event.h b/tools/include/uapi/linux/bpf_perf_event.h new file mode 100644 index 000000000000..eb1b9d21250c --- /dev/null +++ b/tools/include/uapi/linux/bpf_perf_event.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* Copyright (c) 2016 Facebook + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of version 2 of the GNU General Public + * License as published by the Free Software Foundation. + */ +#ifndef _UAPI__LINUX_BPF_PERF_EVENT_H__ +#define _UAPI__LINUX_BPF_PERF_EVENT_H__ + +#include <asm/bpf_perf_event.h> + +struct bpf_perf_event_data { + bpf_user_pt_regs_t regs; + __u64 sample_period; + __u64 addr; +}; + +#endif /* _UAPI__LINUX_BPF_PERF_EVENT_H__ */ diff --git a/tools/include/uapi/linux/btf.h b/tools/include/uapi/linux/btf.h new file mode 100644 index 000000000000..266d4ffa6c07 --- /dev/null +++ b/tools/include/uapi/linux/btf.h @@ -0,0 +1,201 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* Copyright (c) 2018 Facebook */ +#ifndef _UAPI__LINUX_BTF_H__ +#define _UAPI__LINUX_BTF_H__ + +#include <linux/types.h> + +#define BTF_MAGIC 0xeB9F +#define BTF_VERSION 1 + +struct btf_header { + __u16 magic; + __u8 version; + __u8 flags; + __u32 hdr_len; + + /* All offsets are in bytes relative to the end of this header */ + __u32 type_off; /* offset of type section */ + __u32 type_len; /* length of type section */ + __u32 str_off; /* offset of string section */ + __u32 str_len; /* length of string section */ +}; + +/* Max # of type identifier */ +#define BTF_MAX_TYPE 0x000fffff +/* Max offset into the string section */ +#define BTF_MAX_NAME_OFFSET 0x00ffffff +/* Max # of struct/union/enum members or func args */ +#define BTF_MAX_VLEN 0xffff + +struct btf_type { + __u32 name_off; + /* "info" bits arrangement + * bits 0-15: vlen (e.g. # of struct's members) + * bits 16-23: unused + * bits 24-28: kind (e.g. int, ptr, array...etc) + * bits 29-30: unused + * bit 31: kind_flag, currently used by + * struct, union, enum, fwd, enum64, + * decl_tag and type_tag + */ + __u32 info; + /* "size" is used by INT, ENUM, STRUCT, UNION, DATASEC and ENUM64. + * "size" tells the size of the type it is describing. + * + * "type" is used by PTR, TYPEDEF, VOLATILE, CONST, RESTRICT, + * FUNC, FUNC_PROTO, VAR, DECL_TAG and TYPE_TAG. + * "type" is a type_id referring to another type. + */ + union { + __u32 size; + __u32 type; + }; +}; + +#define BTF_INFO_KIND(info) (((info) >> 24) & 0x1f) +#define BTF_INFO_VLEN(info) ((info) & 0xffff) +#define BTF_INFO_KFLAG(info) ((info) >> 31) + +enum { + BTF_KIND_UNKN = 0, /* Unknown */ + BTF_KIND_INT = 1, /* Integer */ + BTF_KIND_PTR = 2, /* Pointer */ + BTF_KIND_ARRAY = 3, /* Array */ + BTF_KIND_STRUCT = 4, /* Struct */ + BTF_KIND_UNION = 5, /* Union */ + BTF_KIND_ENUM = 6, /* Enumeration up to 32-bit values */ + BTF_KIND_FWD = 7, /* Forward */ + BTF_KIND_TYPEDEF = 8, /* Typedef */ + BTF_KIND_VOLATILE = 9, /* Volatile */ + BTF_KIND_CONST = 10, /* Const */ + BTF_KIND_RESTRICT = 11, /* Restrict */ + BTF_KIND_FUNC = 12, /* Function */ + BTF_KIND_FUNC_PROTO = 13, /* Function Proto */ + BTF_KIND_VAR = 14, /* Variable */ + BTF_KIND_DATASEC = 15, /* Section */ + BTF_KIND_FLOAT = 16, /* Floating point */ + BTF_KIND_DECL_TAG = 17, /* Decl Tag */ + BTF_KIND_TYPE_TAG = 18, /* Type Tag */ + BTF_KIND_ENUM64 = 19, /* Enumeration up to 64-bit values */ + + NR_BTF_KINDS, + BTF_KIND_MAX = NR_BTF_KINDS - 1, +}; + +/* For some specific BTF_KIND, "struct btf_type" is immediately + * followed by extra data. + */ + +/* BTF_KIND_INT is followed by a u32 and the following + * is the 32 bits arrangement: + */ +#define BTF_INT_ENCODING(VAL) (((VAL) & 0x0f000000) >> 24) +#define BTF_INT_OFFSET(VAL) (((VAL) & 0x00ff0000) >> 16) +#define BTF_INT_BITS(VAL) ((VAL) & 0x000000ff) + +/* Attributes stored in the BTF_INT_ENCODING */ +#define BTF_INT_SIGNED (1 << 0) +#define BTF_INT_CHAR (1 << 1) +#define BTF_INT_BOOL (1 << 2) + +/* BTF_KIND_ENUM is followed by multiple "struct btf_enum". + * The exact number of btf_enum is stored in the vlen (of the + * info in "struct btf_type"). + */ +struct btf_enum { + __u32 name_off; + __s32 val; +}; + +/* BTF_KIND_ARRAY is followed by one "struct btf_array" */ +struct btf_array { + __u32 type; + __u32 index_type; + __u32 nelems; +}; + +/* BTF_KIND_STRUCT and BTF_KIND_UNION are followed + * by multiple "struct btf_member". The exact number + * of btf_member is stored in the vlen (of the info in + * "struct btf_type"). + */ +struct btf_member { + __u32 name_off; + __u32 type; + /* If the type info kind_flag is set, the btf_member offset + * contains both member bitfield size and bit offset. The + * bitfield size is set for bitfield members. If the type + * info kind_flag is not set, the offset contains only bit + * offset. + */ + __u32 offset; +}; + +/* If the struct/union type info kind_flag is set, the + * following two macros are used to access bitfield_size + * and bit_offset from btf_member.offset. + */ +#define BTF_MEMBER_BITFIELD_SIZE(val) ((val) >> 24) +#define BTF_MEMBER_BIT_OFFSET(val) ((val) & 0xffffff) + +/* BTF_KIND_FUNC_PROTO is followed by multiple "struct btf_param". + * The exact number of btf_param is stored in the vlen (of the + * info in "struct btf_type"). + */ +struct btf_param { + __u32 name_off; + __u32 type; +}; + +enum { + BTF_VAR_STATIC = 0, + BTF_VAR_GLOBAL_ALLOCATED = 1, + BTF_VAR_GLOBAL_EXTERN = 2, +}; + +enum btf_func_linkage { + BTF_FUNC_STATIC = 0, + BTF_FUNC_GLOBAL = 1, + BTF_FUNC_EXTERN = 2, +}; + +/* BTF_KIND_VAR is followed by a single "struct btf_var" to describe + * additional information related to the variable such as its linkage. + */ +struct btf_var { + __u32 linkage; +}; + +/* BTF_KIND_DATASEC is followed by multiple "struct btf_var_secinfo" + * to describe all BTF_KIND_VAR types it contains along with it's + * in-section offset as well as size. + */ +struct btf_var_secinfo { + __u32 type; + __u32 offset; + __u32 size; +}; + +/* BTF_KIND_DECL_TAG is followed by a single "struct btf_decl_tag" to describe + * additional information related to the tag applied location. + * If component_idx == -1, the tag is applied to a struct, union, + * variable or function. Otherwise, it is applied to a struct/union + * member or a func argument, and component_idx indicates which member + * or argument (0 ... vlen-1). + */ +struct btf_decl_tag { + __s32 component_idx; +}; + +/* BTF_KIND_ENUM64 is followed by multiple "struct btf_enum64". + * The exact number of btf_enum64 is stored in the vlen (of the + * info in "struct btf_type"). + */ +struct btf_enum64 { + __u32 name_off; + __u32 val_lo32; + __u32 val_hi32; +}; + +#endif /* _UAPI__LINUX_BTF_H__ */ diff --git a/tools/include/uapi/linux/const.h b/tools/include/uapi/linux/const.h new file mode 100644 index 000000000000..b8f629ef135f --- /dev/null +++ b/tools/include/uapi/linux/const.h @@ -0,0 +1,53 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* const.h: Macros for dealing with constants. */ + +#ifndef _UAPI_LINUX_CONST_H +#define _UAPI_LINUX_CONST_H + +/* Some constant macros are used in both assembler and + * C code. Therefore we cannot annotate them always with + * 'UL' and other type specifiers unilaterally. We + * use the following macros to deal with this. + * + * Similarly, _AT() will cast an expression with a type in C, but + * leave it unchanged in asm. + */ + +#ifdef __ASSEMBLY__ +#define _AC(X,Y) X +#define _AT(T,X) X +#else +#define __AC(X,Y) (X##Y) +#define _AC(X,Y) __AC(X,Y) +#define _AT(T,X) ((T)(X)) +#endif + +#define _UL(x) (_AC(x, UL)) +#define _ULL(x) (_AC(x, ULL)) + +#define _BITUL(x) (_UL(1) << (x)) +#define _BITULL(x) (_ULL(1) << (x)) + +#if !defined(__ASSEMBLY__) +/* + * Missing asm support + * + * __BIT128() would not work in the asm code, as it shifts an + * 'unsigned __int128' data type as direct representation of + * 128 bit constants is not supported in the gcc compiler, as + * they get silently truncated. + * + * TODO: Please revisit this implementation when gcc compiler + * starts representing 128 bit constants directly like long + * and unsigned long etc. Subsequently drop the comment for + * GENMASK_U128() which would then start supporting asm code. + */ +#define _BIT128(x) ((unsigned __int128)(1) << (x)) +#endif + +#define __ALIGN_KERNEL(x, a) __ALIGN_KERNEL_MASK(x, (__typeof__(x))(a) - 1) +#define __ALIGN_KERNEL_MASK(x, mask) (((x) + (mask)) & ~(mask)) + +#define __KERNEL_DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d)) + +#endif /* _UAPI_LINUX_CONST_H */ diff --git a/tools/include/uapi/linux/coredump.h b/tools/include/uapi/linux/coredump.h new file mode 100644 index 000000000000..dc3789b78af0 --- /dev/null +++ b/tools/include/uapi/linux/coredump.h @@ -0,0 +1,104 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ + +#ifndef _UAPI_LINUX_COREDUMP_H +#define _UAPI_LINUX_COREDUMP_H + +#include <linux/types.h> + +/** + * coredump_{req,ack} flags + * @COREDUMP_KERNEL: kernel writes coredump + * @COREDUMP_USERSPACE: userspace writes coredump + * @COREDUMP_REJECT: don't generate coredump + * @COREDUMP_WAIT: wait for coredump server + */ +enum { + COREDUMP_KERNEL = (1ULL << 0), + COREDUMP_USERSPACE = (1ULL << 1), + COREDUMP_REJECT = (1ULL << 2), + COREDUMP_WAIT = (1ULL << 3), +}; + +/** + * struct coredump_req - message kernel sends to userspace + * @size: size of struct coredump_req + * @size_ack: known size of struct coredump_ack on this kernel + * @mask: supported features + * + * When a coredump happens the kernel will connect to the coredump + * socket and send a coredump request to the coredump server. The @size + * member is set to the size of struct coredump_req and provides a hint + * to userspace how much data can be read. Userspace may use MSG_PEEK to + * peek the size of struct coredump_req and then choose to consume it in + * one go. Userspace may also simply read a COREDUMP_ACK_SIZE_VER0 + * request. If the size the kernel sends is larger userspace simply + * discards any remaining data. + * + * The coredump_req->mask member is set to the currently know features. + * Userspace may only set coredump_ack->mask to the bits raised by the + * kernel in coredump_req->mask. + * + * The coredump_req->size_ack member is set by the kernel to the size of + * struct coredump_ack the kernel knows. Userspace may only send up to + * coredump_req->size_ack bytes to the kernel and must set + * coredump_ack->size accordingly. + */ +struct coredump_req { + __u32 size; + __u32 size_ack; + __u64 mask; +}; + +enum { + COREDUMP_REQ_SIZE_VER0 = 16U, /* size of first published struct */ +}; + +/** + * struct coredump_ack - message userspace sends to kernel + * @size: size of the struct + * @spare: unused + * @mask: features kernel is supposed to use + * + * The @size member must be set to the size of struct coredump_ack. It + * may never exceed what the kernel returned in coredump_req->size_ack + * but it may of course be smaller (>= COREDUMP_ACK_SIZE_VER0 and <= + * coredump_req->size_ack). + * + * The @mask member must be set to the features the coredump server + * wants the kernel to use. Only bits the kernel returned in + * coredump_req->mask may be set. + */ +struct coredump_ack { + __u32 size; + __u32 spare; + __u64 mask; +}; + +enum { + COREDUMP_ACK_SIZE_VER0 = 16U, /* size of first published struct */ +}; + +/** + * enum coredump_mark - Markers for the coredump socket + * + * The kernel will place a single byte on the coredump socket. The + * markers notify userspace whether the coredump ack succeeded or + * failed. + * + * @COREDUMP_MARK_MINSIZE: the provided coredump_ack size was too small + * @COREDUMP_MARK_MAXSIZE: the provided coredump_ack size was too big + * @COREDUMP_MARK_UNSUPPORTED: the provided coredump_ack mask was invalid + * @COREDUMP_MARK_CONFLICTING: the provided coredump_ack mask has conflicting options + * @COREDUMP_MARK_REQACK: the coredump request and ack was successful + * @__COREDUMP_MARK_MAX: the maximum coredump mark value + */ +enum coredump_mark { + COREDUMP_MARK_REQACK = 0U, + COREDUMP_MARK_MINSIZE = 1U, + COREDUMP_MARK_MAXSIZE = 2U, + COREDUMP_MARK_UNSUPPORTED = 3U, + COREDUMP_MARK_CONFLICTING = 4U, + __COREDUMP_MARK_MAX = (1U << 31), +}; + +#endif /* _UAPI_LINUX_COREDUMP_H */ diff --git a/tools/include/uapi/linux/elf.h b/tools/include/uapi/linux/elf.h new file mode 100644 index 000000000000..5834b83d7f9a --- /dev/null +++ b/tools/include/uapi/linux/elf.h @@ -0,0 +1,524 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _LINUX_ELF_H +#define _LINUX_ELF_H + +#include <linux/types.h> +#include <linux/elf-em.h> + +/* 32-bit ELF base types. */ +typedef __u32 Elf32_Addr; +typedef __u16 Elf32_Half; +typedef __u32 Elf32_Off; +typedef __s32 Elf32_Sword; +typedef __u32 Elf32_Word; +typedef __u16 Elf32_Versym; + +/* 64-bit ELF base types. */ +typedef __u64 Elf64_Addr; +typedef __u16 Elf64_Half; +typedef __s16 Elf64_SHalf; +typedef __u64 Elf64_Off; +typedef __s32 Elf64_Sword; +typedef __u32 Elf64_Word; +typedef __u64 Elf64_Xword; +typedef __s64 Elf64_Sxword; +typedef __u16 Elf64_Versym; + +/* These constants are for the segment types stored in the image headers */ +#define PT_NULL 0 +#define PT_LOAD 1 +#define PT_DYNAMIC 2 +#define PT_INTERP 3 +#define PT_NOTE 4 +#define PT_SHLIB 5 +#define PT_PHDR 6 +#define PT_TLS 7 /* Thread local storage segment */ +#define PT_LOOS 0x60000000 /* OS-specific */ +#define PT_HIOS 0x6fffffff /* OS-specific */ +#define PT_LOPROC 0x70000000 +#define PT_HIPROC 0x7fffffff +#define PT_GNU_EH_FRAME (PT_LOOS + 0x474e550) +#define PT_GNU_STACK (PT_LOOS + 0x474e551) +#define PT_GNU_RELRO (PT_LOOS + 0x474e552) +#define PT_GNU_PROPERTY (PT_LOOS + 0x474e553) + + +/* ARM MTE memory tag segment type */ +#define PT_AARCH64_MEMTAG_MTE (PT_LOPROC + 0x2) + +/* + * Extended Numbering + * + * If the real number of program header table entries is larger than + * or equal to PN_XNUM(0xffff), it is set to sh_info field of the + * section header at index 0, and PN_XNUM is set to e_phnum + * field. Otherwise, the section header at index 0 is zero + * initialized, if it exists. + * + * Specifications are available in: + * + * - Oracle: Linker and Libraries. + * Part No: 817–1984–19, August 2011. + * https://docs.oracle.com/cd/E18752_01/pdf/817-1984.pdf + * + * - System V ABI AMD64 Architecture Processor Supplement + * Draft Version 0.99.4, + * January 13, 2010. + * http://www.cs.washington.edu/education/courses/cse351/12wi/supp-docs/abi.pdf + */ +#define PN_XNUM 0xffff + +/* These constants define the different elf file types */ +#define ET_NONE 0 +#define ET_REL 1 +#define ET_EXEC 2 +#define ET_DYN 3 +#define ET_CORE 4 +#define ET_LOPROC 0xff00 +#define ET_HIPROC 0xffff + +/* This is the info that is needed to parse the dynamic section of the file */ +#define DT_NULL 0 +#define DT_NEEDED 1 +#define DT_PLTRELSZ 2 +#define DT_PLTGOT 3 +#define DT_HASH 4 +#define DT_STRTAB 5 +#define DT_SYMTAB 6 +#define DT_RELA 7 +#define DT_RELASZ 8 +#define DT_RELAENT 9 +#define DT_STRSZ 10 +#define DT_SYMENT 11 +#define DT_INIT 12 +#define DT_FINI 13 +#define DT_SONAME 14 +#define DT_RPATH 15 +#define DT_SYMBOLIC 16 +#define DT_REL 17 +#define DT_RELSZ 18 +#define DT_RELENT 19 +#define DT_PLTREL 20 +#define DT_DEBUG 21 +#define DT_TEXTREL 22 +#define DT_JMPREL 23 +#define DT_ENCODING 32 +#define OLD_DT_LOOS 0x60000000 +#define DT_LOOS 0x6000000d +#define DT_HIOS 0x6ffff000 +#define DT_VALRNGLO 0x6ffffd00 +#define DT_VALRNGHI 0x6ffffdff +#define DT_ADDRRNGLO 0x6ffffe00 +#define DT_GNU_HASH 0x6ffffef5 +#define DT_ADDRRNGHI 0x6ffffeff +#define DT_VERSYM 0x6ffffff0 +#define DT_RELACOUNT 0x6ffffff9 +#define DT_RELCOUNT 0x6ffffffa +#define DT_FLAGS_1 0x6ffffffb +#define DT_VERDEF 0x6ffffffc +#define DT_VERDEFNUM 0x6ffffffd +#define DT_VERNEED 0x6ffffffe +#define DT_VERNEEDNUM 0x6fffffff +#define OLD_DT_HIOS 0x6fffffff +#define DT_LOPROC 0x70000000 +#define DT_HIPROC 0x7fffffff + +/* This info is needed when parsing the symbol table */ +#define STB_LOCAL 0 +#define STB_GLOBAL 1 +#define STB_WEAK 2 + +#define STN_UNDEF 0 + +#define STT_NOTYPE 0 +#define STT_OBJECT 1 +#define STT_FUNC 2 +#define STT_SECTION 3 +#define STT_FILE 4 +#define STT_COMMON 5 +#define STT_TLS 6 + +#define VER_FLG_BASE 0x1 +#define VER_FLG_WEAK 0x2 + +#define ELF_ST_BIND(x) ((x) >> 4) +#define ELF_ST_TYPE(x) ((x) & 0xf) +#define ELF32_ST_BIND(x) ELF_ST_BIND(x) +#define ELF32_ST_TYPE(x) ELF_ST_TYPE(x) +#define ELF64_ST_BIND(x) ELF_ST_BIND(x) +#define ELF64_ST_TYPE(x) ELF_ST_TYPE(x) + +typedef struct { + Elf32_Sword d_tag; + union { + Elf32_Sword d_val; + Elf32_Addr d_ptr; + } d_un; +} Elf32_Dyn; + +typedef struct { + Elf64_Sxword d_tag; /* entry tag value */ + union { + Elf64_Xword d_val; + Elf64_Addr d_ptr; + } d_un; +} Elf64_Dyn; + +/* The following are used with relocations */ +#define ELF32_R_SYM(x) ((x) >> 8) +#define ELF32_R_TYPE(x) ((x) & 0xff) + +#define ELF64_R_SYM(i) ((i) >> 32) +#define ELF64_R_TYPE(i) ((i) & 0xffffffff) + +typedef struct elf32_rel { + Elf32_Addr r_offset; + Elf32_Word r_info; +} Elf32_Rel; + +typedef struct elf64_rel { + Elf64_Addr r_offset; /* Location at which to apply the action */ + Elf64_Xword r_info; /* index and type of relocation */ +} Elf64_Rel; + +typedef struct elf32_rela { + Elf32_Addr r_offset; + Elf32_Word r_info; + Elf32_Sword r_addend; +} Elf32_Rela; + +typedef struct elf64_rela { + Elf64_Addr r_offset; /* Location at which to apply the action */ + Elf64_Xword r_info; /* index and type of relocation */ + Elf64_Sxword r_addend; /* Constant addend used to compute value */ +} Elf64_Rela; + +typedef struct elf32_sym { + Elf32_Word st_name; + Elf32_Addr st_value; + Elf32_Word st_size; + unsigned char st_info; + unsigned char st_other; + Elf32_Half st_shndx; +} Elf32_Sym; + +typedef struct elf64_sym { + Elf64_Word st_name; /* Symbol name, index in string tbl */ + unsigned char st_info; /* Type and binding attributes */ + unsigned char st_other; /* No defined meaning, 0 */ + Elf64_Half st_shndx; /* Associated section index */ + Elf64_Addr st_value; /* Value of the symbol */ + Elf64_Xword st_size; /* Associated symbol size */ +} Elf64_Sym; + + +#define EI_NIDENT 16 + +typedef struct elf32_hdr { + unsigned char e_ident[EI_NIDENT]; + Elf32_Half e_type; + Elf32_Half e_machine; + Elf32_Word e_version; + Elf32_Addr e_entry; /* Entry point */ + Elf32_Off e_phoff; + Elf32_Off e_shoff; + Elf32_Word e_flags; + Elf32_Half e_ehsize; + Elf32_Half e_phentsize; + Elf32_Half e_phnum; + Elf32_Half e_shentsize; + Elf32_Half e_shnum; + Elf32_Half e_shstrndx; +} Elf32_Ehdr; + +typedef struct elf64_hdr { + unsigned char e_ident[EI_NIDENT]; /* ELF "magic number" */ + Elf64_Half e_type; + Elf64_Half e_machine; + Elf64_Word e_version; + Elf64_Addr e_entry; /* Entry point virtual address */ + Elf64_Off e_phoff; /* Program header table file offset */ + Elf64_Off e_shoff; /* Section header table file offset */ + Elf64_Word e_flags; + Elf64_Half e_ehsize; + Elf64_Half e_phentsize; + Elf64_Half e_phnum; + Elf64_Half e_shentsize; + Elf64_Half e_shnum; + Elf64_Half e_shstrndx; +} Elf64_Ehdr; + +/* These constants define the permissions on sections in the program + header, p_flags. */ +#define PF_R 0x4 +#define PF_W 0x2 +#define PF_X 0x1 + +typedef struct elf32_phdr { + Elf32_Word p_type; + Elf32_Off p_offset; + Elf32_Addr p_vaddr; + Elf32_Addr p_paddr; + Elf32_Word p_filesz; + Elf32_Word p_memsz; + Elf32_Word p_flags; + Elf32_Word p_align; +} Elf32_Phdr; + +typedef struct elf64_phdr { + Elf64_Word p_type; + Elf64_Word p_flags; + Elf64_Off p_offset; /* Segment file offset */ + Elf64_Addr p_vaddr; /* Segment virtual address */ + Elf64_Addr p_paddr; /* Segment physical address */ + Elf64_Xword p_filesz; /* Segment size in file */ + Elf64_Xword p_memsz; /* Segment size in memory */ + Elf64_Xword p_align; /* Segment alignment, file & memory */ +} Elf64_Phdr; + +/* sh_type */ +#define SHT_NULL 0 +#define SHT_PROGBITS 1 +#define SHT_SYMTAB 2 +#define SHT_STRTAB 3 +#define SHT_RELA 4 +#define SHT_HASH 5 +#define SHT_DYNAMIC 6 +#define SHT_NOTE 7 +#define SHT_NOBITS 8 +#define SHT_REL 9 +#define SHT_SHLIB 10 +#define SHT_DYNSYM 11 +#define SHT_NUM 12 +#define SHT_LOPROC 0x70000000 +#define SHT_HIPROC 0x7fffffff +#define SHT_LOUSER 0x80000000 +#define SHT_HIUSER 0xffffffff + +/* sh_flags */ +#define SHF_WRITE 0x1 +#define SHF_ALLOC 0x2 +#define SHF_EXECINSTR 0x4 +#define SHF_RELA_LIVEPATCH 0x00100000 +#define SHF_RO_AFTER_INIT 0x00200000 +#define SHF_MASKPROC 0xf0000000 + +/* special section indexes */ +#define SHN_UNDEF 0 +#define SHN_LORESERVE 0xff00 +#define SHN_LOPROC 0xff00 +#define SHN_HIPROC 0xff1f +#define SHN_LIVEPATCH 0xff20 +#define SHN_ABS 0xfff1 +#define SHN_COMMON 0xfff2 +#define SHN_HIRESERVE 0xffff + +typedef struct elf32_shdr { + Elf32_Word sh_name; + Elf32_Word sh_type; + Elf32_Word sh_flags; + Elf32_Addr sh_addr; + Elf32_Off sh_offset; + Elf32_Word sh_size; + Elf32_Word sh_link; + Elf32_Word sh_info; + Elf32_Word sh_addralign; + Elf32_Word sh_entsize; +} Elf32_Shdr; + +typedef struct elf64_shdr { + Elf64_Word sh_name; /* Section name, index in string tbl */ + Elf64_Word sh_type; /* Type of section */ + Elf64_Xword sh_flags; /* Miscellaneous section attributes */ + Elf64_Addr sh_addr; /* Section virtual addr at execution */ + Elf64_Off sh_offset; /* Section file offset */ + Elf64_Xword sh_size; /* Size of section in bytes */ + Elf64_Word sh_link; /* Index of another section */ + Elf64_Word sh_info; /* Additional section information */ + Elf64_Xword sh_addralign; /* Section alignment */ + Elf64_Xword sh_entsize; /* Entry size if section holds table */ +} Elf64_Shdr; + +#define EI_MAG0 0 /* e_ident[] indexes */ +#define EI_MAG1 1 +#define EI_MAG2 2 +#define EI_MAG3 3 +#define EI_CLASS 4 +#define EI_DATA 5 +#define EI_VERSION 6 +#define EI_OSABI 7 +#define EI_PAD 8 + +#define ELFMAG0 0x7f /* EI_MAG */ +#define ELFMAG1 'E' +#define ELFMAG2 'L' +#define ELFMAG3 'F' +#define ELFMAG "\177ELF" +#define SELFMAG 4 + +#define ELFCLASSNONE 0 /* EI_CLASS */ +#define ELFCLASS32 1 +#define ELFCLASS64 2 +#define ELFCLASSNUM 3 + +#define ELFDATANONE 0 /* e_ident[EI_DATA] */ +#define ELFDATA2LSB 1 +#define ELFDATA2MSB 2 + +#define EV_NONE 0 /* e_version, EI_VERSION */ +#define EV_CURRENT 1 +#define EV_NUM 2 + +#define ELFOSABI_NONE 0 +#define ELFOSABI_LINUX 3 + +#ifndef ELF_OSABI +#define ELF_OSABI ELFOSABI_NONE +#endif + +/* + * Notes used in ET_CORE. Architectures export some of the arch register sets + * using the corresponding note types via the PTRACE_GETREGSET and + * PTRACE_SETREGSET requests. + * The note name for these types is "LINUX", except NT_PRFPREG that is named + * "CORE". + */ +#define NT_PRSTATUS 1 +#define NT_PRFPREG 2 +#define NT_PRPSINFO 3 +#define NT_TASKSTRUCT 4 +#define NT_AUXV 6 +/* + * Note to userspace developers: size of NT_SIGINFO note may increase + * in the future to accomodate more fields, don't assume it is fixed! + */ +#define NT_SIGINFO 0x53494749 +#define NT_FILE 0x46494c45 +#define NT_PRXFPREG 0x46e62b7f /* copied from gdb5.1/include/elf/common.h */ +#define NT_PPC_VMX 0x100 /* PowerPC Altivec/VMX registers */ +#define NT_PPC_SPE 0x101 /* PowerPC SPE/EVR registers */ +#define NT_PPC_VSX 0x102 /* PowerPC VSX registers */ +#define NT_PPC_TAR 0x103 /* Target Address Register */ +#define NT_PPC_PPR 0x104 /* Program Priority Register */ +#define NT_PPC_DSCR 0x105 /* Data Stream Control Register */ +#define NT_PPC_EBB 0x106 /* Event Based Branch Registers */ +#define NT_PPC_PMU 0x107 /* Performance Monitor Registers */ +#define NT_PPC_TM_CGPR 0x108 /* TM checkpointed GPR Registers */ +#define NT_PPC_TM_CFPR 0x109 /* TM checkpointed FPR Registers */ +#define NT_PPC_TM_CVMX 0x10a /* TM checkpointed VMX Registers */ +#define NT_PPC_TM_CVSX 0x10b /* TM checkpointed VSX Registers */ +#define NT_PPC_TM_SPR 0x10c /* TM Special Purpose Registers */ +#define NT_PPC_TM_CTAR 0x10d /* TM checkpointed Target Address Register */ +#define NT_PPC_TM_CPPR 0x10e /* TM checkpointed Program Priority Register */ +#define NT_PPC_TM_CDSCR 0x10f /* TM checkpointed Data Stream Control Register */ +#define NT_PPC_PKEY 0x110 /* Memory Protection Keys registers */ +#define NT_PPC_DEXCR 0x111 /* PowerPC DEXCR registers */ +#define NT_PPC_HASHKEYR 0x112 /* PowerPC HASHKEYR register */ +#define NT_386_TLS 0x200 /* i386 TLS slots (struct user_desc) */ +#define NT_386_IOPERM 0x201 /* x86 io permission bitmap (1=deny) */ +#define NT_X86_XSTATE 0x202 /* x86 extended state using xsave */ +/* Old binutils treats 0x203 as a CET state */ +#define NT_X86_SHSTK 0x204 /* x86 SHSTK state */ +#define NT_X86_XSAVE_LAYOUT 0x205 /* XSAVE layout description */ +#define NT_S390_HIGH_GPRS 0x300 /* s390 upper register halves */ +#define NT_S390_TIMER 0x301 /* s390 timer register */ +#define NT_S390_TODCMP 0x302 /* s390 TOD clock comparator register */ +#define NT_S390_TODPREG 0x303 /* s390 TOD programmable register */ +#define NT_S390_CTRS 0x304 /* s390 control registers */ +#define NT_S390_PREFIX 0x305 /* s390 prefix register */ +#define NT_S390_LAST_BREAK 0x306 /* s390 breaking event address */ +#define NT_S390_SYSTEM_CALL 0x307 /* s390 system call restart data */ +#define NT_S390_TDB 0x308 /* s390 transaction diagnostic block */ +#define NT_S390_VXRS_LOW 0x309 /* s390 vector registers 0-15 upper half */ +#define NT_S390_VXRS_HIGH 0x30a /* s390 vector registers 16-31 */ +#define NT_S390_GS_CB 0x30b /* s390 guarded storage registers */ +#define NT_S390_GS_BC 0x30c /* s390 guarded storage broadcast control block */ +#define NT_S390_RI_CB 0x30d /* s390 runtime instrumentation */ +#define NT_S390_PV_CPU_DATA 0x30e /* s390 protvirt cpu dump data */ +#define NT_ARM_VFP 0x400 /* ARM VFP/NEON registers */ +#define NT_ARM_TLS 0x401 /* ARM TLS register */ +#define NT_ARM_HW_BREAK 0x402 /* ARM hardware breakpoint registers */ +#define NT_ARM_HW_WATCH 0x403 /* ARM hardware watchpoint registers */ +#define NT_ARM_SYSTEM_CALL 0x404 /* ARM system call number */ +#define NT_ARM_SVE 0x405 /* ARM Scalable Vector Extension registers */ +#define NT_ARM_PAC_MASK 0x406 /* ARM pointer authentication code masks */ +#define NT_ARM_PACA_KEYS 0x407 /* ARM pointer authentication address keys */ +#define NT_ARM_PACG_KEYS 0x408 /* ARM pointer authentication generic key */ +#define NT_ARM_TAGGED_ADDR_CTRL 0x409 /* arm64 tagged address control (prctl()) */ +#define NT_ARM_PAC_ENABLED_KEYS 0x40a /* arm64 ptr auth enabled keys (prctl()) */ +#define NT_ARM_SSVE 0x40b /* ARM Streaming SVE registers */ +#define NT_ARM_ZA 0x40c /* ARM SME ZA registers */ +#define NT_ARM_ZT 0x40d /* ARM SME ZT registers */ +#define NT_ARM_FPMR 0x40e /* ARM floating point mode register */ +#define NT_ARM_POE 0x40f /* ARM POE registers */ +#define NT_ARM_GCS 0x410 /* ARM GCS state */ +#define NT_ARC_V2 0x600 /* ARCv2 accumulator/extra registers */ +#define NT_VMCOREDD 0x700 /* Vmcore Device Dump Note */ +#define NT_MIPS_DSP 0x800 /* MIPS DSP ASE registers */ +#define NT_MIPS_FP_MODE 0x801 /* MIPS floating-point mode */ +#define NT_MIPS_MSA 0x802 /* MIPS SIMD registers */ +#define NT_RISCV_CSR 0x900 /* RISC-V Control and Status Registers */ +#define NT_RISCV_VECTOR 0x901 /* RISC-V vector registers */ +#define NT_RISCV_TAGGED_ADDR_CTRL 0x902 /* RISC-V tagged address control (prctl()) */ +#define NT_LOONGARCH_CPUCFG 0xa00 /* LoongArch CPU config registers */ +#define NT_LOONGARCH_CSR 0xa01 /* LoongArch control and status registers */ +#define NT_LOONGARCH_LSX 0xa02 /* LoongArch Loongson SIMD Extension registers */ +#define NT_LOONGARCH_LASX 0xa03 /* LoongArch Loongson Advanced SIMD Extension registers */ +#define NT_LOONGARCH_LBT 0xa04 /* LoongArch Loongson Binary Translation registers */ +#define NT_LOONGARCH_HW_BREAK 0xa05 /* LoongArch hardware breakpoint registers */ +#define NT_LOONGARCH_HW_WATCH 0xa06 /* LoongArch hardware watchpoint registers */ + +/* Note types with note name "GNU" */ +#define NT_GNU_PROPERTY_TYPE_0 5 + +/* Note header in a PT_NOTE section */ +typedef struct elf32_note { + Elf32_Word n_namesz; /* Name size */ + Elf32_Word n_descsz; /* Content size */ + Elf32_Word n_type; /* Content type */ +} Elf32_Nhdr; + +/* Note header in a PT_NOTE section */ +typedef struct elf64_note { + Elf64_Word n_namesz; /* Name size */ + Elf64_Word n_descsz; /* Content size */ + Elf64_Word n_type; /* Content type */ +} Elf64_Nhdr; + +/* .note.gnu.property types for EM_AARCH64: */ +#define GNU_PROPERTY_AARCH64_FEATURE_1_AND 0xc0000000 + +/* Bits for GNU_PROPERTY_AARCH64_FEATURE_1_BTI */ +#define GNU_PROPERTY_AARCH64_FEATURE_1_BTI (1U << 0) + +typedef struct { + Elf32_Half vd_version; + Elf32_Half vd_flags; + Elf32_Half vd_ndx; + Elf32_Half vd_cnt; + Elf32_Word vd_hash; + Elf32_Word vd_aux; + Elf32_Word vd_next; +} Elf32_Verdef; + +typedef struct { + Elf64_Half vd_version; + Elf64_Half vd_flags; + Elf64_Half vd_ndx; + Elf64_Half vd_cnt; + Elf64_Word vd_hash; + Elf64_Word vd_aux; + Elf64_Word vd_next; +} Elf64_Verdef; + +typedef struct { + Elf32_Word vda_name; + Elf32_Word vda_next; +} Elf32_Verdaux; + +typedef struct { + Elf64_Word vda_name; + Elf64_Word vda_next; +} Elf64_Verdaux; + +#endif /* _LINUX_ELF_H */ diff --git a/tools/include/uapi/linux/erspan.h b/tools/include/uapi/linux/erspan.h new file mode 100644 index 000000000000..841573019ae1 --- /dev/null +++ b/tools/include/uapi/linux/erspan.h @@ -0,0 +1,52 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * ERSPAN Tunnel Metadata + * + * Copyright (c) 2018 VMware + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * Userspace API for metadata mode ERSPAN tunnel + */ +#ifndef _UAPI_ERSPAN_H +#define _UAPI_ERSPAN_H + +#include <linux/types.h> /* For __beXX in userspace */ +#include <asm/byteorder.h> + +/* ERSPAN version 2 metadata header */ +struct erspan_md2 { + __be32 timestamp; + __be16 sgt; /* security group tag */ +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u8 hwid_upper:2, + ft:5, + p:1; + __u8 o:1, + gra:2, + dir:1, + hwid:4; +#elif defined(__BIG_ENDIAN_BITFIELD) + __u8 p:1, + ft:5, + hwid_upper:2; + __u8 hwid:4, + dir:1, + gra:2, + o:1; +#else +#error "Please fix <asm/byteorder.h>" +#endif +}; + +struct erspan_metadata { + int version; + union { + __be32 index; /* Version 1 (type II)*/ + struct erspan_md2 md2; /* Version 2 (type III) */ + } u; +}; + +#endif /* _UAPI_ERSPAN_H */ diff --git a/tools/include/uapi/linux/fadvise.h b/tools/include/uapi/linux/fadvise.h new file mode 100644 index 000000000000..0862b87434c2 --- /dev/null +++ b/tools/include/uapi/linux/fadvise.h @@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef FADVISE_H_INCLUDED +#define FADVISE_H_INCLUDED + +#define POSIX_FADV_NORMAL 0 /* No further special treatment. */ +#define POSIX_FADV_RANDOM 1 /* Expect random page references. */ +#define POSIX_FADV_SEQUENTIAL 2 /* Expect sequential page references. */ +#define POSIX_FADV_WILLNEED 3 /* Will need these pages. */ + +/* + * The advise values for POSIX_FADV_DONTNEED and POSIX_ADV_NOREUSE + * for s390-64 differ from the values for the rest of the world. + */ +#if defined(__s390x__) +#define POSIX_FADV_DONTNEED 6 /* Don't need these pages. */ +#define POSIX_FADV_NOREUSE 7 /* Data will be accessed once. */ +#else +#define POSIX_FADV_DONTNEED 4 /* Don't need these pages. */ +#define POSIX_FADV_NOREUSE 5 /* Data will be accessed once. */ +#endif + +#endif /* FADVISE_H_INCLUDED */ diff --git a/tools/include/uapi/linux/fanotify.h b/tools/include/uapi/linux/fanotify.h new file mode 100644 index 000000000000..e710967c7c26 --- /dev/null +++ b/tools/include/uapi/linux/fanotify.h @@ -0,0 +1,274 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _UAPI_LINUX_FANOTIFY_H +#define _UAPI_LINUX_FANOTIFY_H + +#include <linux/types.h> + +/* the following events that user-space can register for */ +#define FAN_ACCESS 0x00000001 /* File was accessed */ +#define FAN_MODIFY 0x00000002 /* File was modified */ +#define FAN_ATTRIB 0x00000004 /* Metadata changed */ +#define FAN_CLOSE_WRITE 0x00000008 /* Writable file closed */ +#define FAN_CLOSE_NOWRITE 0x00000010 /* Unwritable file closed */ +#define FAN_OPEN 0x00000020 /* File was opened */ +#define FAN_MOVED_FROM 0x00000040 /* File was moved from X */ +#define FAN_MOVED_TO 0x00000080 /* File was moved to Y */ +#define FAN_CREATE 0x00000100 /* Subfile was created */ +#define FAN_DELETE 0x00000200 /* Subfile was deleted */ +#define FAN_DELETE_SELF 0x00000400 /* Self was deleted */ +#define FAN_MOVE_SELF 0x00000800 /* Self was moved */ +#define FAN_OPEN_EXEC 0x00001000 /* File was opened for exec */ + +#define FAN_Q_OVERFLOW 0x00004000 /* Event queued overflowed */ +#define FAN_FS_ERROR 0x00008000 /* Filesystem error */ + +#define FAN_OPEN_PERM 0x00010000 /* File open in perm check */ +#define FAN_ACCESS_PERM 0x00020000 /* File accessed in perm check */ +#define FAN_OPEN_EXEC_PERM 0x00040000 /* File open/exec in perm check */ +/* #define FAN_DIR_MODIFY 0x00080000 */ /* Deprecated (reserved) */ + +#define FAN_PRE_ACCESS 0x00100000 /* Pre-content access hook */ +#define FAN_MNT_ATTACH 0x01000000 /* Mount was attached */ +#define FAN_MNT_DETACH 0x02000000 /* Mount was detached */ + +#define FAN_EVENT_ON_CHILD 0x08000000 /* Interested in child events */ + +#define FAN_RENAME 0x10000000 /* File was renamed */ + +#define FAN_ONDIR 0x40000000 /* Event occurred against dir */ + +/* helper events */ +#define FAN_CLOSE (FAN_CLOSE_WRITE | FAN_CLOSE_NOWRITE) /* close */ +#define FAN_MOVE (FAN_MOVED_FROM | FAN_MOVED_TO) /* moves */ + +/* flags used for fanotify_init() */ +#define FAN_CLOEXEC 0x00000001 +#define FAN_NONBLOCK 0x00000002 + +/* These are NOT bitwise flags. Both bits are used together. */ +#define FAN_CLASS_NOTIF 0x00000000 +#define FAN_CLASS_CONTENT 0x00000004 +#define FAN_CLASS_PRE_CONTENT 0x00000008 + +/* Deprecated - do not use this in programs and do not add new flags here! */ +#define FAN_ALL_CLASS_BITS (FAN_CLASS_NOTIF | FAN_CLASS_CONTENT | \ + FAN_CLASS_PRE_CONTENT) + +#define FAN_UNLIMITED_QUEUE 0x00000010 +#define FAN_UNLIMITED_MARKS 0x00000020 +#define FAN_ENABLE_AUDIT 0x00000040 + +/* Flags to determine fanotify event format */ +#define FAN_REPORT_PIDFD 0x00000080 /* Report pidfd for event->pid */ +#define FAN_REPORT_TID 0x00000100 /* event->pid is thread id */ +#define FAN_REPORT_FID 0x00000200 /* Report unique file id */ +#define FAN_REPORT_DIR_FID 0x00000400 /* Report unique directory id */ +#define FAN_REPORT_NAME 0x00000800 /* Report events with name */ +#define FAN_REPORT_TARGET_FID 0x00001000 /* Report dirent target id */ +#define FAN_REPORT_FD_ERROR 0x00002000 /* event->fd can report error */ +#define FAN_REPORT_MNT 0x00004000 /* Report mount events */ + +/* Convenience macro - FAN_REPORT_NAME requires FAN_REPORT_DIR_FID */ +#define FAN_REPORT_DFID_NAME (FAN_REPORT_DIR_FID | FAN_REPORT_NAME) +/* Convenience macro - FAN_REPORT_TARGET_FID requires all other FID flags */ +#define FAN_REPORT_DFID_NAME_TARGET (FAN_REPORT_DFID_NAME | \ + FAN_REPORT_FID | FAN_REPORT_TARGET_FID) + +/* Deprecated - do not use this in programs and do not add new flags here! */ +#define FAN_ALL_INIT_FLAGS (FAN_CLOEXEC | FAN_NONBLOCK | \ + FAN_ALL_CLASS_BITS | FAN_UNLIMITED_QUEUE |\ + FAN_UNLIMITED_MARKS) + +/* flags used for fanotify_modify_mark() */ +#define FAN_MARK_ADD 0x00000001 +#define FAN_MARK_REMOVE 0x00000002 +#define FAN_MARK_DONT_FOLLOW 0x00000004 +#define FAN_MARK_ONLYDIR 0x00000008 +/* FAN_MARK_MOUNT is 0x00000010 */ +#define FAN_MARK_IGNORED_MASK 0x00000020 +#define FAN_MARK_IGNORED_SURV_MODIFY 0x00000040 +#define FAN_MARK_FLUSH 0x00000080 +/* FAN_MARK_FILESYSTEM is 0x00000100 */ +#define FAN_MARK_EVICTABLE 0x00000200 +/* This bit is mutually exclusive with FAN_MARK_IGNORED_MASK bit */ +#define FAN_MARK_IGNORE 0x00000400 + +/* These are NOT bitwise flags. Both bits can be used togther. */ +#define FAN_MARK_INODE 0x00000000 +#define FAN_MARK_MOUNT 0x00000010 +#define FAN_MARK_FILESYSTEM 0x00000100 +#define FAN_MARK_MNTNS 0x00000110 + +/* + * Convenience macro - FAN_MARK_IGNORE requires FAN_MARK_IGNORED_SURV_MODIFY + * for non-inode mark types. + */ +#define FAN_MARK_IGNORE_SURV (FAN_MARK_IGNORE | FAN_MARK_IGNORED_SURV_MODIFY) + +/* Deprecated - do not use this in programs and do not add new flags here! */ +#define FAN_ALL_MARK_FLAGS (FAN_MARK_ADD |\ + FAN_MARK_REMOVE |\ + FAN_MARK_DONT_FOLLOW |\ + FAN_MARK_ONLYDIR |\ + FAN_MARK_MOUNT |\ + FAN_MARK_IGNORED_MASK |\ + FAN_MARK_IGNORED_SURV_MODIFY |\ + FAN_MARK_FLUSH) + +/* Deprecated - do not use this in programs and do not add new flags here! */ +#define FAN_ALL_EVENTS (FAN_ACCESS |\ + FAN_MODIFY |\ + FAN_CLOSE |\ + FAN_OPEN) + +/* + * All events which require a permission response from userspace + */ +/* Deprecated - do not use this in programs and do not add new flags here! */ +#define FAN_ALL_PERM_EVENTS (FAN_OPEN_PERM |\ + FAN_ACCESS_PERM) + +/* Deprecated - do not use this in programs and do not add new flags here! */ +#define FAN_ALL_OUTGOING_EVENTS (FAN_ALL_EVENTS |\ + FAN_ALL_PERM_EVENTS |\ + FAN_Q_OVERFLOW) + +#define FANOTIFY_METADATA_VERSION 3 + +struct fanotify_event_metadata { + __u32 event_len; + __u8 vers; + __u8 reserved; + __u16 metadata_len; + __aligned_u64 mask; + __s32 fd; + __s32 pid; +}; + +#define FAN_EVENT_INFO_TYPE_FID 1 +#define FAN_EVENT_INFO_TYPE_DFID_NAME 2 +#define FAN_EVENT_INFO_TYPE_DFID 3 +#define FAN_EVENT_INFO_TYPE_PIDFD 4 +#define FAN_EVENT_INFO_TYPE_ERROR 5 +#define FAN_EVENT_INFO_TYPE_RANGE 6 +#define FAN_EVENT_INFO_TYPE_MNT 7 + +/* Special info types for FAN_RENAME */ +#define FAN_EVENT_INFO_TYPE_OLD_DFID_NAME 10 +/* Reserved for FAN_EVENT_INFO_TYPE_OLD_DFID 11 */ +#define FAN_EVENT_INFO_TYPE_NEW_DFID_NAME 12 +/* Reserved for FAN_EVENT_INFO_TYPE_NEW_DFID 13 */ + +/* Variable length info record following event metadata */ +struct fanotify_event_info_header { + __u8 info_type; + __u8 pad; + __u16 len; +}; + +/* + * Unique file identifier info record. + * This structure is used for records of types FAN_EVENT_INFO_TYPE_FID, + * FAN_EVENT_INFO_TYPE_DFID and FAN_EVENT_INFO_TYPE_DFID_NAME. + * For FAN_EVENT_INFO_TYPE_DFID_NAME there is additionally a null terminated + * name immediately after the file handle. + */ +struct fanotify_event_info_fid { + struct fanotify_event_info_header hdr; + __kernel_fsid_t fsid; + /* + * Following is an opaque struct file_handle that can be passed as + * an argument to open_by_handle_at(2). + */ + unsigned char handle[]; +}; + +/* + * This structure is used for info records of type FAN_EVENT_INFO_TYPE_PIDFD. + * It holds a pidfd for the pid that was responsible for generating an event. + */ +struct fanotify_event_info_pidfd { + struct fanotify_event_info_header hdr; + __s32 pidfd; +}; + +struct fanotify_event_info_error { + struct fanotify_event_info_header hdr; + __s32 error; + __u32 error_count; +}; + +struct fanotify_event_info_range { + struct fanotify_event_info_header hdr; + __u32 pad; + __u64 offset; + __u64 count; +}; + +struct fanotify_event_info_mnt { + struct fanotify_event_info_header hdr; + __u64 mnt_id; +}; + +/* + * User space may need to record additional information about its decision. + * The extra information type records what kind of information is included. + * The default is none. We also define an extra information buffer whose + * size is determined by the extra information type. + * + * If the information type is Audit Rule, then the information following + * is the rule number that triggered the user space decision that + * requires auditing. + */ + +#define FAN_RESPONSE_INFO_NONE 0 +#define FAN_RESPONSE_INFO_AUDIT_RULE 1 + +struct fanotify_response { + __s32 fd; + __u32 response; +}; + +struct fanotify_response_info_header { + __u8 type; + __u8 pad; + __u16 len; +}; + +struct fanotify_response_info_audit_rule { + struct fanotify_response_info_header hdr; + __u32 rule_number; + __u32 subj_trust; + __u32 obj_trust; +}; + +/* Legit userspace responses to a _PERM event */ +#define FAN_ALLOW 0x01 +#define FAN_DENY 0x02 +/* errno other than EPERM can specified in upper byte of deny response */ +#define FAN_ERRNO_BITS 8 +#define FAN_ERRNO_SHIFT (32 - FAN_ERRNO_BITS) +#define FAN_ERRNO_MASK ((1 << FAN_ERRNO_BITS) - 1) +#define FAN_DENY_ERRNO(err) \ + (FAN_DENY | ((((__u32)(err)) & FAN_ERRNO_MASK) << FAN_ERRNO_SHIFT)) + +#define FAN_AUDIT 0x10 /* Bitmask to create audit record for result */ +#define FAN_INFO 0x20 /* Bitmask to indicate additional information */ + +/* No fd set in event */ +#define FAN_NOFD -1 +#define FAN_NOPIDFD FAN_NOFD +#define FAN_EPIDFD -2 + +/* Helper functions to deal with fanotify_event_metadata buffers */ +#define FAN_EVENT_METADATA_LEN (sizeof(struct fanotify_event_metadata)) + +#define FAN_EVENT_NEXT(meta, len) ((len) -= (meta)->event_len, \ + (struct fanotify_event_metadata*)(((char *)(meta)) + \ + (meta)->event_len)) + +#define FAN_EVENT_OK(meta, len) ((long)(len) >= (long)FAN_EVENT_METADATA_LEN && \ + (long)(meta)->event_len >= (long)FAN_EVENT_METADATA_LEN && \ + (long)(meta)->event_len <= (long)(len)) + +#endif /* _UAPI_LINUX_FANOTIFY_H */ diff --git a/tools/include/uapi/linux/filter.h b/tools/include/uapi/linux/filter.h new file mode 100644 index 000000000000..eaef459e7bd4 --- /dev/null +++ b/tools/include/uapi/linux/filter.h @@ -0,0 +1,90 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Linux Socket Filter Data Structures + */ + +#ifndef __LINUX_FILTER_H__ +#define __LINUX_FILTER_H__ + + +#include <linux/types.h> +#include <linux/bpf_common.h> + +/* + * Current version of the filter code architecture. + */ +#define BPF_MAJOR_VERSION 1 +#define BPF_MINOR_VERSION 1 + +/* + * Try and keep these values and structures similar to BSD, especially + * the BPF code definitions which need to match so you can share filters + */ + +struct sock_filter { /* Filter block */ + __u16 code; /* Actual filter code */ + __u8 jt; /* Jump true */ + __u8 jf; /* Jump false */ + __u32 k; /* Generic multiuse field */ +}; + +struct sock_fprog { /* Required for SO_ATTACH_FILTER. */ + unsigned short len; /* Number of filter blocks */ + struct sock_filter *filter; +}; + +/* ret - BPF_K and BPF_X also apply */ +#define BPF_RVAL(code) ((code) & 0x18) +#define BPF_A 0x10 + +/* misc */ +#define BPF_MISCOP(code) ((code) & 0xf8) +#define BPF_TAX 0x00 +#define BPF_TXA 0x80 + +/* + * Macros for filter block array initializers. + */ +#ifndef BPF_STMT +#define BPF_STMT(code, k) { (unsigned short)(code), 0, 0, k } +#endif +#ifndef BPF_JUMP +#define BPF_JUMP(code, k, jt, jf) { (unsigned short)(code), jt, jf, k } +#endif + +/* + * Number of scratch memory words for: BPF_ST and BPF_STX + */ +#define BPF_MEMWORDS 16 + +/* RATIONALE. Negative offsets are invalid in BPF. + We use them to reference ancillary data. + Unlike introduction new instructions, it does not break + existing compilers/optimizers. + */ +#define SKF_AD_OFF (-0x1000) +#define SKF_AD_PROTOCOL 0 +#define SKF_AD_PKTTYPE 4 +#define SKF_AD_IFINDEX 8 +#define SKF_AD_NLATTR 12 +#define SKF_AD_NLATTR_NEST 16 +#define SKF_AD_MARK 20 +#define SKF_AD_QUEUE 24 +#define SKF_AD_HATYPE 28 +#define SKF_AD_RXHASH 32 +#define SKF_AD_CPU 36 +#define SKF_AD_ALU_XOR_X 40 +#define SKF_AD_VLAN_TAG 44 +#define SKF_AD_VLAN_TAG_PRESENT 48 +#define SKF_AD_PAY_OFFSET 52 +#define SKF_AD_RANDOM 56 +#define SKF_AD_VLAN_TPID 60 +#define SKF_AD_MAX 64 + +#define SKF_NET_OFF (-0x100000) +#define SKF_LL_OFF (-0x200000) + +#define BPF_NET_OFF SKF_NET_OFF +#define BPF_LL_OFF SKF_LL_OFF + +#endif /* __LINUX_FILTER_H__ */ diff --git a/tools/include/uapi/linux/fs.h b/tools/include/uapi/linux/fs.h new file mode 100644 index 000000000000..24ddf7bc4f25 --- /dev/null +++ b/tools/include/uapi/linux/fs.h @@ -0,0 +1,569 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _UAPI_LINUX_FS_H +#define _UAPI_LINUX_FS_H + +/* + * This file has definitions for some important file table structures + * and constants and structures used by various generic file system + * ioctl's. Please do not make any changes in this file before + * sending patches for review to linux-fsdevel@vger.kernel.org and + * linux-api@vger.kernel.org. + */ + +#include <linux/limits.h> +#include <linux/ioctl.h> +#include <linux/types.h> +#ifndef __KERNEL__ +#include <linux/fscrypt.h> +#endif + +/* Use of MS_* flags within the kernel is restricted to core mount(2) code. */ +#if !defined(__KERNEL__) +#include <linux/mount.h> +#endif + +/* + * It's silly to have NR_OPEN bigger than NR_FILE, but you can change + * the file limit at runtime and only root can increase the per-process + * nr_file rlimit, so it's safe to set up a ridiculously high absolute + * upper limit on files-per-process. + * + * Some programs (notably those using select()) may have to be + * recompiled to take full advantage of the new limits.. + */ + +/* Fixed constants first: */ +#undef NR_OPEN +#define INR_OPEN_CUR 1024 /* Initial setting for nfile rlimits */ +#define INR_OPEN_MAX 4096 /* Hard limit for nfile rlimits */ + +#define BLOCK_SIZE_BITS 10 +#define BLOCK_SIZE (1<<BLOCK_SIZE_BITS) + +/* flags for integrity meta */ +#define IO_INTEGRITY_CHK_GUARD (1U << 0) /* enforce guard check */ +#define IO_INTEGRITY_CHK_REFTAG (1U << 1) /* enforce ref check */ +#define IO_INTEGRITY_CHK_APPTAG (1U << 2) /* enforce app check */ + +#define IO_INTEGRITY_VALID_FLAGS (IO_INTEGRITY_CHK_GUARD | \ + IO_INTEGRITY_CHK_REFTAG | \ + IO_INTEGRITY_CHK_APPTAG) + +#define SEEK_SET 0 /* seek relative to beginning of file */ +#define SEEK_CUR 1 /* seek relative to current file position */ +#define SEEK_END 2 /* seek relative to end of file */ +#define SEEK_DATA 3 /* seek to the next data */ +#define SEEK_HOLE 4 /* seek to the next hole */ +#define SEEK_MAX SEEK_HOLE + +#define RENAME_NOREPLACE (1 << 0) /* Don't overwrite target */ +#define RENAME_EXCHANGE (1 << 1) /* Exchange source and dest */ +#define RENAME_WHITEOUT (1 << 2) /* Whiteout source */ + +struct file_clone_range { + __s64 src_fd; + __u64 src_offset; + __u64 src_length; + __u64 dest_offset; +}; + +struct fstrim_range { + __u64 start; + __u64 len; + __u64 minlen; +}; + +/* + * We include a length field because some filesystems (vfat) have an identifier + * that we do want to expose as a UUID, but doesn't have the standard length. + * + * We use a fixed size buffer beacuse this interface will, by fiat, never + * support "UUIDs" longer than 16 bytes; we don't want to force all downstream + * users to have to deal with that. + */ +struct fsuuid2 { + __u8 len; + __u8 uuid[16]; +}; + +struct fs_sysfs_path { + __u8 len; + __u8 name[128]; +}; + +/* extent-same (dedupe) ioctls; these MUST match the btrfs ioctl definitions */ +#define FILE_DEDUPE_RANGE_SAME 0 +#define FILE_DEDUPE_RANGE_DIFFERS 1 + +/* from struct btrfs_ioctl_file_extent_same_info */ +struct file_dedupe_range_info { + __s64 dest_fd; /* in - destination file */ + __u64 dest_offset; /* in - start of extent in destination */ + __u64 bytes_deduped; /* out - total # of bytes we were able + * to dedupe from this file. */ + /* status of this dedupe operation: + * < 0 for error + * == FILE_DEDUPE_RANGE_SAME if dedupe succeeds + * == FILE_DEDUPE_RANGE_DIFFERS if data differs + */ + __s32 status; /* out - see above description */ + __u32 reserved; /* must be zero */ +}; + +/* from struct btrfs_ioctl_file_extent_same_args */ +struct file_dedupe_range { + __u64 src_offset; /* in - start of extent in source */ + __u64 src_length; /* in - length of extent */ + __u16 dest_count; /* in - total elements in info array */ + __u16 reserved1; /* must be zero */ + __u32 reserved2; /* must be zero */ + struct file_dedupe_range_info info[]; +}; + +/* And dynamically-tunable limits and defaults: */ +struct files_stat_struct { + unsigned long nr_files; /* read only */ + unsigned long nr_free_files; /* read only */ + unsigned long max_files; /* tunable */ +}; + +struct inodes_stat_t { + long nr_inodes; + long nr_unused; + long dummy[5]; /* padding for sysctl ABI compatibility */ +}; + + +#define NR_FILE 8192 /* this can well be larger on a larger system */ + +/* + * Structure for FS_IOC_FSGETXATTR[A] and FS_IOC_FSSETXATTR. + */ +struct fsxattr { + __u32 fsx_xflags; /* xflags field value (get/set) */ + __u32 fsx_extsize; /* extsize field value (get/set)*/ + __u32 fsx_nextents; /* nextents field value (get) */ + __u32 fsx_projid; /* project identifier (get/set) */ + __u32 fsx_cowextsize; /* CoW extsize field value (get/set)*/ + unsigned char fsx_pad[8]; +}; + +/* + * Flags for the fsx_xflags field + */ +#define FS_XFLAG_REALTIME 0x00000001 /* data in realtime volume */ +#define FS_XFLAG_PREALLOC 0x00000002 /* preallocated file extents */ +#define FS_XFLAG_IMMUTABLE 0x00000008 /* file cannot be modified */ +#define FS_XFLAG_APPEND 0x00000010 /* all writes append */ +#define FS_XFLAG_SYNC 0x00000020 /* all writes synchronous */ +#define FS_XFLAG_NOATIME 0x00000040 /* do not update access time */ +#define FS_XFLAG_NODUMP 0x00000080 /* do not include in backups */ +#define FS_XFLAG_RTINHERIT 0x00000100 /* create with rt bit set */ +#define FS_XFLAG_PROJINHERIT 0x00000200 /* create with parents projid */ +#define FS_XFLAG_NOSYMLINKS 0x00000400 /* disallow symlink creation */ +#define FS_XFLAG_EXTSIZE 0x00000800 /* extent size allocator hint */ +#define FS_XFLAG_EXTSZINHERIT 0x00001000 /* inherit inode extent size */ +#define FS_XFLAG_NODEFRAG 0x00002000 /* do not defragment */ +#define FS_XFLAG_FILESTREAM 0x00004000 /* use filestream allocator */ +#define FS_XFLAG_DAX 0x00008000 /* use DAX for IO */ +#define FS_XFLAG_COWEXTSIZE 0x00010000 /* CoW extent size allocator hint */ +#define FS_XFLAG_HASATTR 0x80000000 /* no DIFLAG for this */ + +/* the read-only stuff doesn't really belong here, but any other place is + probably as bad and I don't want to create yet another include file. */ + +#define BLKROSET _IO(0x12,93) /* set device read-only (0 = read-write) */ +#define BLKROGET _IO(0x12,94) /* get read-only status (0 = read_write) */ +#define BLKRRPART _IO(0x12,95) /* re-read partition table */ +#define BLKGETSIZE _IO(0x12,96) /* return device size /512 (long *arg) */ +#define BLKFLSBUF _IO(0x12,97) /* flush buffer cache */ +#define BLKRASET _IO(0x12,98) /* set read ahead for block device */ +#define BLKRAGET _IO(0x12,99) /* get current read ahead setting */ +#define BLKFRASET _IO(0x12,100)/* set filesystem (mm/filemap.c) read-ahead */ +#define BLKFRAGET _IO(0x12,101)/* get filesystem (mm/filemap.c) read-ahead */ +#define BLKSECTSET _IO(0x12,102)/* set max sectors per request (ll_rw_blk.c) */ +#define BLKSECTGET _IO(0x12,103)/* get max sectors per request (ll_rw_blk.c) */ +#define BLKSSZGET _IO(0x12,104)/* get block device sector size */ +#if 0 +#define BLKPG _IO(0x12,105)/* See blkpg.h */ + +/* Some people are morons. Do not use sizeof! */ + +#define BLKELVGET _IOR(0x12,106,size_t)/* elevator get */ +#define BLKELVSET _IOW(0x12,107,size_t)/* elevator set */ +/* This was here just to show that the number is taken - + probably all these _IO(0x12,*) ioctls should be moved to blkpg.h. */ +#endif +/* A jump here: 108-111 have been used for various private purposes. */ +#define BLKBSZGET _IOR(0x12,112,size_t) +#define BLKBSZSET _IOW(0x12,113,size_t) +#define BLKGETSIZE64 _IOR(0x12,114,size_t) /* return device size in bytes (u64 *arg) */ +#define BLKTRACESETUP _IOWR(0x12,115,struct blk_user_trace_setup) +#define BLKTRACESTART _IO(0x12,116) +#define BLKTRACESTOP _IO(0x12,117) +#define BLKTRACETEARDOWN _IO(0x12,118) +#define BLKDISCARD _IO(0x12,119) +#define BLKIOMIN _IO(0x12,120) +#define BLKIOOPT _IO(0x12,121) +#define BLKALIGNOFF _IO(0x12,122) +#define BLKPBSZGET _IO(0x12,123) +#define BLKDISCARDZEROES _IO(0x12,124) +#define BLKSECDISCARD _IO(0x12,125) +#define BLKROTATIONAL _IO(0x12,126) +#define BLKZEROOUT _IO(0x12,127) +#define BLKGETDISKSEQ _IOR(0x12,128,__u64) +/* + * A jump here: 130-136 are reserved for zoned block devices + * (see uapi/linux/blkzoned.h) + */ + +#define BMAP_IOCTL 1 /* obsolete - kept for compatibility */ +#define FIBMAP _IO(0x00,1) /* bmap access */ +#define FIGETBSZ _IO(0x00,2) /* get the block size used for bmap */ +#define FIFREEZE _IOWR('X', 119, int) /* Freeze */ +#define FITHAW _IOWR('X', 120, int) /* Thaw */ +#define FITRIM _IOWR('X', 121, struct fstrim_range) /* Trim */ +#define FICLONE _IOW(0x94, 9, int) +#define FICLONERANGE _IOW(0x94, 13, struct file_clone_range) +#define FIDEDUPERANGE _IOWR(0x94, 54, struct file_dedupe_range) + +#define FSLABEL_MAX 256 /* Max chars for the interface; each fs may differ */ + +#define FS_IOC_GETFLAGS _IOR('f', 1, long) +#define FS_IOC_SETFLAGS _IOW('f', 2, long) +#define FS_IOC_GETVERSION _IOR('v', 1, long) +#define FS_IOC_SETVERSION _IOW('v', 2, long) +#define FS_IOC_FIEMAP _IOWR('f', 11, struct fiemap) +#define FS_IOC32_GETFLAGS _IOR('f', 1, int) +#define FS_IOC32_SETFLAGS _IOW('f', 2, int) +#define FS_IOC32_GETVERSION _IOR('v', 1, int) +#define FS_IOC32_SETVERSION _IOW('v', 2, int) +#define FS_IOC_FSGETXATTR _IOR('X', 31, struct fsxattr) +#define FS_IOC_FSSETXATTR _IOW('X', 32, struct fsxattr) +#define FS_IOC_GETFSLABEL _IOR(0x94, 49, char[FSLABEL_MAX]) +#define FS_IOC_SETFSLABEL _IOW(0x94, 50, char[FSLABEL_MAX]) +/* Returns the external filesystem UUID, the same one blkid returns */ +#define FS_IOC_GETFSUUID _IOR(0x15, 0, struct fsuuid2) +/* + * Returns the path component under /sys/fs/ that refers to this filesystem; + * also /sys/kernel/debug/ for filesystems with debugfs exports + */ +#define FS_IOC_GETFSSYSFSPATH _IOR(0x15, 1, struct fs_sysfs_path) + +/* + * Inode flags (FS_IOC_GETFLAGS / FS_IOC_SETFLAGS) + * + * Note: for historical reasons, these flags were originally used and + * defined for use by ext2/ext3, and then other file systems started + * using these flags so they wouldn't need to write their own version + * of chattr/lsattr (which was shipped as part of e2fsprogs). You + * should think twice before trying to use these flags in new + * contexts, or trying to assign these flags, since they are used both + * as the UAPI and the on-disk encoding for ext2/3/4. Also, we are + * almost out of 32-bit flags. :-) + * + * We have recently hoisted FS_IOC_FSGETXATTR / FS_IOC_FSSETXATTR from + * XFS to the generic FS level interface. This uses a structure that + * has padding and hence has more room to grow, so it may be more + * appropriate for many new use cases. + * + * Please do not change these flags or interfaces before checking with + * linux-fsdevel@vger.kernel.org and linux-api@vger.kernel.org. + */ +#define FS_SECRM_FL 0x00000001 /* Secure deletion */ +#define FS_UNRM_FL 0x00000002 /* Undelete */ +#define FS_COMPR_FL 0x00000004 /* Compress file */ +#define FS_SYNC_FL 0x00000008 /* Synchronous updates */ +#define FS_IMMUTABLE_FL 0x00000010 /* Immutable file */ +#define FS_APPEND_FL 0x00000020 /* writes to file may only append */ +#define FS_NODUMP_FL 0x00000040 /* do not dump file */ +#define FS_NOATIME_FL 0x00000080 /* do not update atime */ +/* Reserved for compression usage... */ +#define FS_DIRTY_FL 0x00000100 +#define FS_COMPRBLK_FL 0x00000200 /* One or more compressed clusters */ +#define FS_NOCOMP_FL 0x00000400 /* Don't compress */ +/* End compression flags --- maybe not all used */ +#define FS_ENCRYPT_FL 0x00000800 /* Encrypted file */ +#define FS_BTREE_FL 0x00001000 /* btree format dir */ +#define FS_INDEX_FL 0x00001000 /* hash-indexed directory */ +#define FS_IMAGIC_FL 0x00002000 /* AFS directory */ +#define FS_JOURNAL_DATA_FL 0x00004000 /* Reserved for ext3 */ +#define FS_NOTAIL_FL 0x00008000 /* file tail should not be merged */ +#define FS_DIRSYNC_FL 0x00010000 /* dirsync behaviour (directories only) */ +#define FS_TOPDIR_FL 0x00020000 /* Top of directory hierarchies*/ +#define FS_HUGE_FILE_FL 0x00040000 /* Reserved for ext4 */ +#define FS_EXTENT_FL 0x00080000 /* Extents */ +#define FS_VERITY_FL 0x00100000 /* Verity protected inode */ +#define FS_EA_INODE_FL 0x00200000 /* Inode used for large EA */ +#define FS_EOFBLOCKS_FL 0x00400000 /* Reserved for ext4 */ +#define FS_NOCOW_FL 0x00800000 /* Do not cow file */ +#define FS_DAX_FL 0x02000000 /* Inode is DAX */ +#define FS_INLINE_DATA_FL 0x10000000 /* Reserved for ext4 */ +#define FS_PROJINHERIT_FL 0x20000000 /* Create with parents projid */ +#define FS_CASEFOLD_FL 0x40000000 /* Folder is case insensitive */ +#define FS_RESERVED_FL 0x80000000 /* reserved for ext2 lib */ + +#define FS_FL_USER_VISIBLE 0x0003DFFF /* User visible flags */ +#define FS_FL_USER_MODIFIABLE 0x000380FF /* User modifiable flags */ + + +#define SYNC_FILE_RANGE_WAIT_BEFORE 1 +#define SYNC_FILE_RANGE_WRITE 2 +#define SYNC_FILE_RANGE_WAIT_AFTER 4 +#define SYNC_FILE_RANGE_WRITE_AND_WAIT (SYNC_FILE_RANGE_WRITE | \ + SYNC_FILE_RANGE_WAIT_BEFORE | \ + SYNC_FILE_RANGE_WAIT_AFTER) + +/* + * Flags for preadv2/pwritev2: + */ + +typedef int __bitwise __kernel_rwf_t; + +/* high priority request, poll if possible */ +#define RWF_HIPRI ((__force __kernel_rwf_t)0x00000001) + +/* per-IO O_DSYNC */ +#define RWF_DSYNC ((__force __kernel_rwf_t)0x00000002) + +/* per-IO O_SYNC */ +#define RWF_SYNC ((__force __kernel_rwf_t)0x00000004) + +/* per-IO, return -EAGAIN if operation would block */ +#define RWF_NOWAIT ((__force __kernel_rwf_t)0x00000008) + +/* per-IO O_APPEND */ +#define RWF_APPEND ((__force __kernel_rwf_t)0x00000010) + +/* per-IO negation of O_APPEND */ +#define RWF_NOAPPEND ((__force __kernel_rwf_t)0x00000020) + +/* Atomic Write */ +#define RWF_ATOMIC ((__force __kernel_rwf_t)0x00000040) + +/* buffered IO that drops the cache after reading or writing data */ +#define RWF_DONTCACHE ((__force __kernel_rwf_t)0x00000080) + +/* mask of flags supported by the kernel */ +#define RWF_SUPPORTED (RWF_HIPRI | RWF_DSYNC | RWF_SYNC | RWF_NOWAIT |\ + RWF_APPEND | RWF_NOAPPEND | RWF_ATOMIC |\ + RWF_DONTCACHE) + +#define PROCFS_IOCTL_MAGIC 'f' + +/* Pagemap ioctl */ +#define PAGEMAP_SCAN _IOWR(PROCFS_IOCTL_MAGIC, 16, struct pm_scan_arg) + +/* Bitmasks provided in pm_scan_args masks and reported in page_region.categories. */ +#define PAGE_IS_WPALLOWED (1 << 0) +#define PAGE_IS_WRITTEN (1 << 1) +#define PAGE_IS_FILE (1 << 2) +#define PAGE_IS_PRESENT (1 << 3) +#define PAGE_IS_SWAPPED (1 << 4) +#define PAGE_IS_PFNZERO (1 << 5) +#define PAGE_IS_HUGE (1 << 6) +#define PAGE_IS_SOFT_DIRTY (1 << 7) +#define PAGE_IS_GUARD (1 << 8) + +/* + * struct page_region - Page region with flags + * @start: Start of the region + * @end: End of the region (exclusive) + * @categories: PAGE_IS_* category bitmask for the region + */ +struct page_region { + __u64 start; + __u64 end; + __u64 categories; +}; + +/* Flags for PAGEMAP_SCAN ioctl */ +#define PM_SCAN_WP_MATCHING (1 << 0) /* Write protect the pages matched. */ +#define PM_SCAN_CHECK_WPASYNC (1 << 1) /* Abort the scan when a non-WP-enabled page is found. */ + +/* + * struct pm_scan_arg - Pagemap ioctl argument + * @size: Size of the structure + * @flags: Flags for the IOCTL + * @start: Starting address of the region + * @end: Ending address of the region + * @walk_end Address where the scan stopped (written by kernel). + * walk_end == end (address tags cleared) informs that the scan completed on entire range. + * @vec: Address of page_region struct array for output + * @vec_len: Length of the page_region struct array + * @max_pages: Optional limit for number of returned pages (0 = disabled) + * @category_inverted: PAGE_IS_* categories which values match if 0 instead of 1 + * @category_mask: Skip pages for which any category doesn't match + * @category_anyof_mask: Skip pages for which no category matches + * @return_mask: PAGE_IS_* categories that are to be reported in `page_region`s returned + */ +struct pm_scan_arg { + __u64 size; + __u64 flags; + __u64 start; + __u64 end; + __u64 walk_end; + __u64 vec; + __u64 vec_len; + __u64 max_pages; + __u64 category_inverted; + __u64 category_mask; + __u64 category_anyof_mask; + __u64 return_mask; +}; + +/* /proc/<pid>/maps ioctl */ +#define PROCMAP_QUERY _IOWR(PROCFS_IOCTL_MAGIC, 17, struct procmap_query) + +enum procmap_query_flags { + /* + * VMA permission flags. + * + * Can be used as part of procmap_query.query_flags field to look up + * only VMAs satisfying specified subset of permissions. E.g., specifying + * PROCMAP_QUERY_VMA_READABLE only will return both readable and read/write VMAs, + * while having PROCMAP_QUERY_VMA_READABLE | PROCMAP_QUERY_VMA_WRITABLE will only + * return read/write VMAs, though both executable/non-executable and + * private/shared will be ignored. + * + * PROCMAP_QUERY_VMA_* flags are also returned in procmap_query.vma_flags + * field to specify actual VMA permissions. + */ + PROCMAP_QUERY_VMA_READABLE = 0x01, + PROCMAP_QUERY_VMA_WRITABLE = 0x02, + PROCMAP_QUERY_VMA_EXECUTABLE = 0x04, + PROCMAP_QUERY_VMA_SHARED = 0x08, + /* + * Query modifier flags. + * + * By default VMA that covers provided address is returned, or -ENOENT + * is returned. With PROCMAP_QUERY_COVERING_OR_NEXT_VMA flag set, closest + * VMA with vma_start > addr will be returned if no covering VMA is + * found. + * + * PROCMAP_QUERY_FILE_BACKED_VMA instructs query to consider only VMAs that + * have file backing. Can be combined with PROCMAP_QUERY_COVERING_OR_NEXT_VMA + * to iterate all VMAs with file backing. + */ + PROCMAP_QUERY_COVERING_OR_NEXT_VMA = 0x10, + PROCMAP_QUERY_FILE_BACKED_VMA = 0x20, +}; + +/* + * Input/output argument structured passed into ioctl() call. It can be used + * to query a set of VMAs (Virtual Memory Areas) of a process. + * + * Each field can be one of three kinds, marked in a short comment to the + * right of the field: + * - "in", input argument, user has to provide this value, kernel doesn't modify it; + * - "out", output argument, kernel sets this field with VMA data; + * - "in/out", input and output argument; user provides initial value (used + * to specify maximum allowable buffer size), and kernel sets it to actual + * amount of data written (or zero, if there is no data). + * + * If matching VMA is found (according to criterias specified by + * query_addr/query_flags, all the out fields are filled out, and ioctl() + * returns 0. If there is no matching VMA, -ENOENT will be returned. + * In case of any other error, negative error code other than -ENOENT is + * returned. + * + * Most of the data is similar to the one returned as text in /proc/<pid>/maps + * file, but procmap_query provides more querying flexibility. There are no + * consistency guarantees between subsequent ioctl() calls, but data returned + * for matched VMA is self-consistent. + */ +struct procmap_query { + /* Query struct size, for backwards/forward compatibility */ + __u64 size; + /* + * Query flags, a combination of enum procmap_query_flags values. + * Defines query filtering and behavior, see enum procmap_query_flags. + * + * Input argument, provided by user. Kernel doesn't modify it. + */ + __u64 query_flags; /* in */ + /* + * Query address. By default, VMA that covers this address will + * be looked up. PROCMAP_QUERY_* flags above modify this default + * behavior further. + * + * Input argument, provided by user. Kernel doesn't modify it. + */ + __u64 query_addr; /* in */ + /* VMA starting (inclusive) and ending (exclusive) address, if VMA is found. */ + __u64 vma_start; /* out */ + __u64 vma_end; /* out */ + /* VMA permissions flags. A combination of PROCMAP_QUERY_VMA_* flags. */ + __u64 vma_flags; /* out */ + /* VMA backing page size granularity. */ + __u64 vma_page_size; /* out */ + /* + * VMA file offset. If VMA has file backing, this specifies offset + * within the file that VMA's start address corresponds to. + * Is set to zero if VMA has no backing file. + */ + __u64 vma_offset; /* out */ + /* Backing file's inode number, or zero, if VMA has no backing file. */ + __u64 inode; /* out */ + /* Backing file's device major/minor number, or zero, if VMA has no backing file. */ + __u32 dev_major; /* out */ + __u32 dev_minor; /* out */ + /* + * If set to non-zero value, signals the request to return VMA name + * (i.e., VMA's backing file's absolute path, with " (deleted)" suffix + * appended, if file was unlinked from FS) for matched VMA. VMA name + * can also be some special name (e.g., "[heap]", "[stack]") or could + * be even user-supplied with prctl(PR_SET_VMA, PR_SET_VMA_ANON_NAME). + * + * Kernel will set this field to zero, if VMA has no associated name. + * Otherwise kernel will return actual amount of bytes filled in + * user-supplied buffer (see vma_name_addr field below), including the + * terminating zero. + * + * If VMA name is longer that user-supplied maximum buffer size, + * -E2BIG error is returned. + * + * If this field is set to non-zero value, vma_name_addr should point + * to valid user space memory buffer of at least vma_name_size bytes. + * If set to zero, vma_name_addr should be set to zero as well + */ + __u32 vma_name_size; /* in/out */ + /* + * If set to non-zero value, signals the request to extract and return + * VMA's backing file's build ID, if the backing file is an ELF file + * and it contains embedded build ID. + * + * Kernel will set this field to zero, if VMA has no backing file, + * backing file is not an ELF file, or ELF file has no build ID + * embedded. + * + * Build ID is a binary value (not a string). Kernel will set + * build_id_size field to exact number of bytes used for build ID. + * If build ID is requested and present, but needs more bytes than + * user-supplied maximum buffer size (see build_id_addr field below), + * -E2BIG error will be returned. + * + * If this field is set to non-zero value, build_id_addr should point + * to valid user space memory buffer of at least build_id_size bytes. + * If set to zero, build_id_addr should be set to zero as well + */ + __u32 build_id_size; /* in/out */ + /* + * User-supplied address of a buffer of at least vma_name_size bytes + * for kernel to fill with matched VMA's name (see vma_name_size field + * description above for details). + * + * Should be set to zero if VMA name should not be returned. + */ + __u64 vma_name_addr; /* in */ + /* + * User-supplied address of a buffer of at least build_id_size bytes + * for kernel to fill with matched VMA's ELF build ID, if available + * (see build_id_size field description above for details). + * + * Should be set to zero if build ID should not be returned. + */ + __u64 build_id_addr; /* in */ +}; + +#endif /* _UAPI_LINUX_FS_H */ diff --git a/tools/include/uapi/linux/fscrypt.h b/tools/include/uapi/linux/fscrypt.h new file mode 100644 index 000000000000..3aff99f2696a --- /dev/null +++ b/tools/include/uapi/linux/fscrypt.h @@ -0,0 +1,199 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * fscrypt user API + * + * These ioctls can be used on filesystems that support fscrypt. See the + * "User API" section of Documentation/filesystems/fscrypt.rst. + */ +#ifndef _UAPI_LINUX_FSCRYPT_H +#define _UAPI_LINUX_FSCRYPT_H + +#include <linux/ioctl.h> +#include <linux/types.h> + +/* Encryption policy flags */ +#define FSCRYPT_POLICY_FLAGS_PAD_4 0x00 +#define FSCRYPT_POLICY_FLAGS_PAD_8 0x01 +#define FSCRYPT_POLICY_FLAGS_PAD_16 0x02 +#define FSCRYPT_POLICY_FLAGS_PAD_32 0x03 +#define FSCRYPT_POLICY_FLAGS_PAD_MASK 0x03 +#define FSCRYPT_POLICY_FLAG_DIRECT_KEY 0x04 +#define FSCRYPT_POLICY_FLAG_IV_INO_LBLK_64 0x08 +#define FSCRYPT_POLICY_FLAG_IV_INO_LBLK_32 0x10 + +/* Encryption algorithms */ +#define FSCRYPT_MODE_AES_256_XTS 1 +#define FSCRYPT_MODE_AES_256_CTS 4 +#define FSCRYPT_MODE_AES_128_CBC 5 +#define FSCRYPT_MODE_AES_128_CTS 6 +#define FSCRYPT_MODE_SM4_XTS 7 +#define FSCRYPT_MODE_SM4_CTS 8 +#define FSCRYPT_MODE_ADIANTUM 9 +#define FSCRYPT_MODE_AES_256_HCTR2 10 +/* If adding a mode number > 10, update FSCRYPT_MODE_MAX in fscrypt_private.h */ + +/* + * Legacy policy version; ad-hoc KDF and no key verification. + * For new encrypted directories, use fscrypt_policy_v2 instead. + * + * Careful: the .version field for this is actually 0, not 1. + */ +#define FSCRYPT_POLICY_V1 0 +#define FSCRYPT_KEY_DESCRIPTOR_SIZE 8 +struct fscrypt_policy_v1 { + __u8 version; + __u8 contents_encryption_mode; + __u8 filenames_encryption_mode; + __u8 flags; + __u8 master_key_descriptor[FSCRYPT_KEY_DESCRIPTOR_SIZE]; +}; + +/* + * Process-subscribed "logon" key description prefix and payload format. + * Deprecated; prefer FS_IOC_ADD_ENCRYPTION_KEY instead. + */ +#define FSCRYPT_KEY_DESC_PREFIX "fscrypt:" +#define FSCRYPT_KEY_DESC_PREFIX_SIZE 8 +#define FSCRYPT_MAX_KEY_SIZE 64 +struct fscrypt_key { + __u32 mode; + __u8 raw[FSCRYPT_MAX_KEY_SIZE]; + __u32 size; +}; + +/* + * New policy version with HKDF and key verification (recommended). + */ +#define FSCRYPT_POLICY_V2 2 +#define FSCRYPT_KEY_IDENTIFIER_SIZE 16 +struct fscrypt_policy_v2 { + __u8 version; + __u8 contents_encryption_mode; + __u8 filenames_encryption_mode; + __u8 flags; + __u8 log2_data_unit_size; + __u8 __reserved[3]; + __u8 master_key_identifier[FSCRYPT_KEY_IDENTIFIER_SIZE]; +}; + +/* Struct passed to FS_IOC_GET_ENCRYPTION_POLICY_EX */ +struct fscrypt_get_policy_ex_arg { + __u64 policy_size; /* input/output */ + union { + __u8 version; + struct fscrypt_policy_v1 v1; + struct fscrypt_policy_v2 v2; + } policy; /* output */ +}; + +/* + * v1 policy keys are specified by an arbitrary 8-byte key "descriptor", + * matching fscrypt_policy_v1::master_key_descriptor. + */ +#define FSCRYPT_KEY_SPEC_TYPE_DESCRIPTOR 1 + +/* + * v2 policy keys are specified by a 16-byte key "identifier" which the kernel + * calculates as a cryptographic hash of the key itself, + * matching fscrypt_policy_v2::master_key_identifier. + */ +#define FSCRYPT_KEY_SPEC_TYPE_IDENTIFIER 2 + +/* + * Specifies a key, either for v1 or v2 policies. This doesn't contain the + * actual key itself; this is just the "name" of the key. + */ +struct fscrypt_key_specifier { + __u32 type; /* one of FSCRYPT_KEY_SPEC_TYPE_* */ + __u32 __reserved; + union { + __u8 __reserved[32]; /* reserve some extra space */ + __u8 descriptor[FSCRYPT_KEY_DESCRIPTOR_SIZE]; + __u8 identifier[FSCRYPT_KEY_IDENTIFIER_SIZE]; + } u; +}; + +/* + * Payload of Linux keyring key of type "fscrypt-provisioning", referenced by + * fscrypt_add_key_arg::key_id as an alternative to fscrypt_add_key_arg::raw. + */ +struct fscrypt_provisioning_key_payload { + __u32 type; + __u32 flags; + __u8 raw[]; +}; + +/* Struct passed to FS_IOC_ADD_ENCRYPTION_KEY */ +struct fscrypt_add_key_arg { + struct fscrypt_key_specifier key_spec; + __u32 raw_size; + __u32 key_id; +#define FSCRYPT_ADD_KEY_FLAG_HW_WRAPPED 0x00000001 + __u32 flags; + __u32 __reserved[7]; + __u8 raw[]; +}; + +/* Struct passed to FS_IOC_REMOVE_ENCRYPTION_KEY */ +struct fscrypt_remove_key_arg { + struct fscrypt_key_specifier key_spec; +#define FSCRYPT_KEY_REMOVAL_STATUS_FLAG_FILES_BUSY 0x00000001 +#define FSCRYPT_KEY_REMOVAL_STATUS_FLAG_OTHER_USERS 0x00000002 + __u32 removal_status_flags; /* output */ + __u32 __reserved[5]; +}; + +/* Struct passed to FS_IOC_GET_ENCRYPTION_KEY_STATUS */ +struct fscrypt_get_key_status_arg { + /* input */ + struct fscrypt_key_specifier key_spec; + __u32 __reserved[6]; + + /* output */ +#define FSCRYPT_KEY_STATUS_ABSENT 1 +#define FSCRYPT_KEY_STATUS_PRESENT 2 +#define FSCRYPT_KEY_STATUS_INCOMPLETELY_REMOVED 3 + __u32 status; +#define FSCRYPT_KEY_STATUS_FLAG_ADDED_BY_SELF 0x00000001 + __u32 status_flags; + __u32 user_count; + __u32 __out_reserved[13]; +}; + +#define FS_IOC_SET_ENCRYPTION_POLICY _IOR('f', 19, struct fscrypt_policy_v1) +#define FS_IOC_GET_ENCRYPTION_PWSALT _IOW('f', 20, __u8[16]) +#define FS_IOC_GET_ENCRYPTION_POLICY _IOW('f', 21, struct fscrypt_policy_v1) +#define FS_IOC_GET_ENCRYPTION_POLICY_EX _IOWR('f', 22, __u8[9]) /* size + version */ +#define FS_IOC_ADD_ENCRYPTION_KEY _IOWR('f', 23, struct fscrypt_add_key_arg) +#define FS_IOC_REMOVE_ENCRYPTION_KEY _IOWR('f', 24, struct fscrypt_remove_key_arg) +#define FS_IOC_REMOVE_ENCRYPTION_KEY_ALL_USERS _IOWR('f', 25, struct fscrypt_remove_key_arg) +#define FS_IOC_GET_ENCRYPTION_KEY_STATUS _IOWR('f', 26, struct fscrypt_get_key_status_arg) +#define FS_IOC_GET_ENCRYPTION_NONCE _IOR('f', 27, __u8[16]) + +/**********************************************************************/ + +/* old names; don't add anything new here! */ +#ifndef __KERNEL__ +#define fscrypt_policy fscrypt_policy_v1 +#define FS_KEY_DESCRIPTOR_SIZE FSCRYPT_KEY_DESCRIPTOR_SIZE +#define FS_POLICY_FLAGS_PAD_4 FSCRYPT_POLICY_FLAGS_PAD_4 +#define FS_POLICY_FLAGS_PAD_8 FSCRYPT_POLICY_FLAGS_PAD_8 +#define FS_POLICY_FLAGS_PAD_16 FSCRYPT_POLICY_FLAGS_PAD_16 +#define FS_POLICY_FLAGS_PAD_32 FSCRYPT_POLICY_FLAGS_PAD_32 +#define FS_POLICY_FLAGS_PAD_MASK FSCRYPT_POLICY_FLAGS_PAD_MASK +#define FS_POLICY_FLAG_DIRECT_KEY FSCRYPT_POLICY_FLAG_DIRECT_KEY +#define FS_POLICY_FLAGS_VALID 0x07 /* contains old flags only */ +#define FS_ENCRYPTION_MODE_INVALID 0 /* never used */ +#define FS_ENCRYPTION_MODE_AES_256_XTS FSCRYPT_MODE_AES_256_XTS +#define FS_ENCRYPTION_MODE_AES_256_GCM 2 /* never used */ +#define FS_ENCRYPTION_MODE_AES_256_CBC 3 /* never used */ +#define FS_ENCRYPTION_MODE_AES_256_CTS FSCRYPT_MODE_AES_256_CTS +#define FS_ENCRYPTION_MODE_AES_128_CBC FSCRYPT_MODE_AES_128_CBC +#define FS_ENCRYPTION_MODE_AES_128_CTS FSCRYPT_MODE_AES_128_CTS +#define FS_ENCRYPTION_MODE_ADIANTUM FSCRYPT_MODE_ADIANTUM +#define FS_KEY_DESC_PREFIX FSCRYPT_KEY_DESC_PREFIX +#define FS_KEY_DESC_PREFIX_SIZE FSCRYPT_KEY_DESC_PREFIX_SIZE +#define FS_MAX_KEY_SIZE FSCRYPT_MAX_KEY_SIZE +#endif /* !__KERNEL__ */ + +#endif /* _UAPI_LINUX_FSCRYPT_H */ diff --git a/tools/include/uapi/linux/genetlink.h b/tools/include/uapi/linux/genetlink.h new file mode 100644 index 000000000000..ddba3ca01e39 --- /dev/null +++ b/tools/include/uapi/linux/genetlink.h @@ -0,0 +1,103 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _UAPI__LINUX_GENERIC_NETLINK_H +#define _UAPI__LINUX_GENERIC_NETLINK_H + +#include <linux/types.h> +#include <linux/netlink.h> + +#define GENL_NAMSIZ 16 /* length of family name */ + +#define GENL_MIN_ID NLMSG_MIN_TYPE +#define GENL_MAX_ID 1023 + +struct genlmsghdr { + __u8 cmd; + __u8 version; + __u16 reserved; +}; + +#define GENL_HDRLEN NLMSG_ALIGN(sizeof(struct genlmsghdr)) + +#define GENL_ADMIN_PERM 0x01 +#define GENL_CMD_CAP_DO 0x02 +#define GENL_CMD_CAP_DUMP 0x04 +#define GENL_CMD_CAP_HASPOL 0x08 +#define GENL_UNS_ADMIN_PERM 0x10 + +/* + * List of reserved static generic netlink identifiers: + */ +#define GENL_ID_CTRL NLMSG_MIN_TYPE +#define GENL_ID_VFS_DQUOT (NLMSG_MIN_TYPE + 1) +#define GENL_ID_PMCRAID (NLMSG_MIN_TYPE + 2) +/* must be last reserved + 1 */ +#define GENL_START_ALLOC (NLMSG_MIN_TYPE + 3) + +/************************************************************************** + * Controller + **************************************************************************/ + +enum { + CTRL_CMD_UNSPEC, + CTRL_CMD_NEWFAMILY, + CTRL_CMD_DELFAMILY, + CTRL_CMD_GETFAMILY, + CTRL_CMD_NEWOPS, + CTRL_CMD_DELOPS, + CTRL_CMD_GETOPS, + CTRL_CMD_NEWMCAST_GRP, + CTRL_CMD_DELMCAST_GRP, + CTRL_CMD_GETMCAST_GRP, /* unused */ + CTRL_CMD_GETPOLICY, + __CTRL_CMD_MAX, +}; + +#define CTRL_CMD_MAX (__CTRL_CMD_MAX - 1) + +enum { + CTRL_ATTR_UNSPEC, + CTRL_ATTR_FAMILY_ID, + CTRL_ATTR_FAMILY_NAME, + CTRL_ATTR_VERSION, + CTRL_ATTR_HDRSIZE, + CTRL_ATTR_MAXATTR, + CTRL_ATTR_OPS, + CTRL_ATTR_MCAST_GROUPS, + CTRL_ATTR_POLICY, + CTRL_ATTR_OP_POLICY, + CTRL_ATTR_OP, + __CTRL_ATTR_MAX, +}; + +#define CTRL_ATTR_MAX (__CTRL_ATTR_MAX - 1) + +enum { + CTRL_ATTR_OP_UNSPEC, + CTRL_ATTR_OP_ID, + CTRL_ATTR_OP_FLAGS, + __CTRL_ATTR_OP_MAX, +}; + +#define CTRL_ATTR_OP_MAX (__CTRL_ATTR_OP_MAX - 1) + +enum { + CTRL_ATTR_MCAST_GRP_UNSPEC, + CTRL_ATTR_MCAST_GRP_NAME, + CTRL_ATTR_MCAST_GRP_ID, + __CTRL_ATTR_MCAST_GRP_MAX, +}; + +#define CTRL_ATTR_MCAST_GRP_MAX (__CTRL_ATTR_MCAST_GRP_MAX - 1) + +enum { + CTRL_ATTR_POLICY_UNSPEC, + CTRL_ATTR_POLICY_DO, + CTRL_ATTR_POLICY_DUMP, + + __CTRL_ATTR_POLICY_DUMP_MAX, + CTRL_ATTR_POLICY_DUMP_MAX = __CTRL_ATTR_POLICY_DUMP_MAX - 1 +}; + +#define CTRL_ATTR_POLICY_MAX (__CTRL_ATTR_POLICY_DUMP_MAX - 1) + +#endif /* _UAPI__LINUX_GENERIC_NETLINK_H */ diff --git a/tools/include/uapi/linux/hw_breakpoint.h b/tools/include/uapi/linux/hw_breakpoint.h new file mode 100644 index 000000000000..1575d3ca6f0d --- /dev/null +++ b/tools/include/uapi/linux/hw_breakpoint.h @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _UAPI_LINUX_HW_BREAKPOINT_H +#define _UAPI_LINUX_HW_BREAKPOINT_H + +enum { + HW_BREAKPOINT_LEN_1 = 1, + HW_BREAKPOINT_LEN_2 = 2, + HW_BREAKPOINT_LEN_3 = 3, + HW_BREAKPOINT_LEN_4 = 4, + HW_BREAKPOINT_LEN_5 = 5, + HW_BREAKPOINT_LEN_6 = 6, + HW_BREAKPOINT_LEN_7 = 7, + HW_BREAKPOINT_LEN_8 = 8, +}; + +enum { + HW_BREAKPOINT_EMPTY = 0, + HW_BREAKPOINT_R = 1, + HW_BREAKPOINT_W = 2, + HW_BREAKPOINT_RW = HW_BREAKPOINT_R | HW_BREAKPOINT_W, + HW_BREAKPOINT_X = 4, + HW_BREAKPOINT_INVALID = HW_BREAKPOINT_RW | HW_BREAKPOINT_X, +}; + +#endif /* _UAPI_LINUX_HW_BREAKPOINT_H */ diff --git a/tools/include/uapi/linux/if_addr.h b/tools/include/uapi/linux/if_addr.h new file mode 100644 index 000000000000..aa7958b4e41d --- /dev/null +++ b/tools/include/uapi/linux/if_addr.h @@ -0,0 +1,79 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _UAPI__LINUX_IF_ADDR_H +#define _UAPI__LINUX_IF_ADDR_H + +#include <linux/types.h> +#include <linux/netlink.h> + +struct ifaddrmsg { + __u8 ifa_family; + __u8 ifa_prefixlen; /* The prefix length */ + __u8 ifa_flags; /* Flags */ + __u8 ifa_scope; /* Address scope */ + __u32 ifa_index; /* Link index */ +}; + +/* + * Important comment: + * IFA_ADDRESS is prefix address, rather than local interface address. + * It makes no difference for normally configured broadcast interfaces, + * but for point-to-point IFA_ADDRESS is DESTINATION address, + * local address is supplied in IFA_LOCAL attribute. + * + * IFA_FLAGS is a u32 attribute that extends the u8 field ifa_flags. + * If present, the value from struct ifaddrmsg will be ignored. + */ +enum { + IFA_UNSPEC, + IFA_ADDRESS, + IFA_LOCAL, + IFA_LABEL, + IFA_BROADCAST, + IFA_ANYCAST, + IFA_CACHEINFO, + IFA_MULTICAST, + IFA_FLAGS, + IFA_RT_PRIORITY, /* u32, priority/metric for prefix route */ + IFA_TARGET_NETNSID, + IFA_PROTO, /* u8, address protocol */ + __IFA_MAX, +}; + +#define IFA_MAX (__IFA_MAX - 1) + +/* ifa_flags */ +#define IFA_F_SECONDARY 0x01 +#define IFA_F_TEMPORARY IFA_F_SECONDARY + +#define IFA_F_NODAD 0x02 +#define IFA_F_OPTIMISTIC 0x04 +#define IFA_F_DADFAILED 0x08 +#define IFA_F_HOMEADDRESS 0x10 +#define IFA_F_DEPRECATED 0x20 +#define IFA_F_TENTATIVE 0x40 +#define IFA_F_PERMANENT 0x80 +#define IFA_F_MANAGETEMPADDR 0x100 +#define IFA_F_NOPREFIXROUTE 0x200 +#define IFA_F_MCAUTOJOIN 0x400 +#define IFA_F_STABLE_PRIVACY 0x800 + +struct ifa_cacheinfo { + __u32 ifa_prefered; + __u32 ifa_valid; + __u32 cstamp; /* created timestamp, hundredths of seconds */ + __u32 tstamp; /* updated timestamp, hundredths of seconds */ +}; + +/* backwards compatibility for userspace */ +#ifndef __KERNEL__ +#define IFA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifaddrmsg)))) +#define IFA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifaddrmsg)) +#endif + +/* ifa_proto */ +#define IFAPROT_UNSPEC 0 +#define IFAPROT_KERNEL_LO 1 /* loopback */ +#define IFAPROT_KERNEL_RA 2 /* set by kernel from router announcement */ +#define IFAPROT_KERNEL_LL 3 /* link-local set by kernel */ + +#endif diff --git a/tools/include/uapi/linux/if_link.h b/tools/include/uapi/linux/if_link.h new file mode 100644 index 000000000000..7e46ca4cd31b --- /dev/null +++ b/tools/include/uapi/linux/if_link.h @@ -0,0 +1,1980 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _UAPI_LINUX_IF_LINK_H +#define _UAPI_LINUX_IF_LINK_H + +#include <linux/types.h> +#include <linux/netlink.h> + +/* This struct should be in sync with struct rtnl_link_stats64 */ +struct rtnl_link_stats { + __u32 rx_packets; + __u32 tx_packets; + __u32 rx_bytes; + __u32 tx_bytes; + __u32 rx_errors; + __u32 tx_errors; + __u32 rx_dropped; + __u32 tx_dropped; + __u32 multicast; + __u32 collisions; + /* detailed rx_errors: */ + __u32 rx_length_errors; + __u32 rx_over_errors; + __u32 rx_crc_errors; + __u32 rx_frame_errors; + __u32 rx_fifo_errors; + __u32 rx_missed_errors; + + /* detailed tx_errors */ + __u32 tx_aborted_errors; + __u32 tx_carrier_errors; + __u32 tx_fifo_errors; + __u32 tx_heartbeat_errors; + __u32 tx_window_errors; + + /* for cslip etc */ + __u32 rx_compressed; + __u32 tx_compressed; + + __u32 rx_nohandler; +}; + +/** + * struct rtnl_link_stats64 - The main device statistics structure. + * + * @rx_packets: Number of good packets received by the interface. + * For hardware interfaces counts all good packets received from the device + * by the host, including packets which host had to drop at various stages + * of processing (even in the driver). + * + * @tx_packets: Number of packets successfully transmitted. + * For hardware interfaces counts packets which host was able to successfully + * hand over to the device, which does not necessarily mean that packets + * had been successfully transmitted out of the device, only that device + * acknowledged it copied them out of host memory. + * + * @rx_bytes: Number of good received bytes, corresponding to @rx_packets. + * + * For IEEE 802.3 devices should count the length of Ethernet Frames + * excluding the FCS. + * + * @tx_bytes: Number of good transmitted bytes, corresponding to @tx_packets. + * + * For IEEE 802.3 devices should count the length of Ethernet Frames + * excluding the FCS. + * + * @rx_errors: Total number of bad packets received on this network device. + * This counter must include events counted by @rx_length_errors, + * @rx_crc_errors, @rx_frame_errors and other errors not otherwise + * counted. + * + * @tx_errors: Total number of transmit problems. + * This counter must include events counter by @tx_aborted_errors, + * @tx_carrier_errors, @tx_fifo_errors, @tx_heartbeat_errors, + * @tx_window_errors and other errors not otherwise counted. + * + * @rx_dropped: Number of packets received but not processed, + * e.g. due to lack of resources or unsupported protocol. + * For hardware interfaces this counter may include packets discarded + * due to L2 address filtering but should not include packets dropped + * by the device due to buffer exhaustion which are counted separately in + * @rx_missed_errors (since procfs folds those two counters together). + * + * @tx_dropped: Number of packets dropped on their way to transmission, + * e.g. due to lack of resources. + * + * @multicast: Multicast packets received. + * For hardware interfaces this statistic is commonly calculated + * at the device level (unlike @rx_packets) and therefore may include + * packets which did not reach the host. + * + * For IEEE 802.3 devices this counter may be equivalent to: + * + * - 30.3.1.1.21 aMulticastFramesReceivedOK + * + * @collisions: Number of collisions during packet transmissions. + * + * @rx_length_errors: Number of packets dropped due to invalid length. + * Part of aggregate "frame" errors in `/proc/net/dev`. + * + * For IEEE 802.3 devices this counter should be equivalent to a sum + * of the following attributes: + * + * - 30.3.1.1.23 aInRangeLengthErrors + * - 30.3.1.1.24 aOutOfRangeLengthField + * - 30.3.1.1.25 aFrameTooLongErrors + * + * @rx_over_errors: Receiver FIFO overflow event counter. + * + * Historically the count of overflow events. Such events may be + * reported in the receive descriptors or via interrupts, and may + * not correspond one-to-one with dropped packets. + * + * The recommended interpretation for high speed interfaces is - + * number of packets dropped because they did not fit into buffers + * provided by the host, e.g. packets larger than MTU or next buffer + * in the ring was not available for a scatter transfer. + * + * Part of aggregate "frame" errors in `/proc/net/dev`. + * + * This statistics was historically used interchangeably with + * @rx_fifo_errors. + * + * This statistic corresponds to hardware events and is not commonly used + * on software devices. + * + * @rx_crc_errors: Number of packets received with a CRC error. + * Part of aggregate "frame" errors in `/proc/net/dev`. + * + * For IEEE 802.3 devices this counter must be equivalent to: + * + * - 30.3.1.1.6 aFrameCheckSequenceErrors + * + * @rx_frame_errors: Receiver frame alignment errors. + * Part of aggregate "frame" errors in `/proc/net/dev`. + * + * For IEEE 802.3 devices this counter should be equivalent to: + * + * - 30.3.1.1.7 aAlignmentErrors + * + * @rx_fifo_errors: Receiver FIFO error counter. + * + * Historically the count of overflow events. Those events may be + * reported in the receive descriptors or via interrupts, and may + * not correspond one-to-one with dropped packets. + * + * This statistics was used interchangeably with @rx_over_errors. + * Not recommended for use in drivers for high speed interfaces. + * + * This statistic is used on software devices, e.g. to count software + * packet queue overflow (can) or sequencing errors (GRE). + * + * @rx_missed_errors: Count of packets missed by the host. + * Folded into the "drop" counter in `/proc/net/dev`. + * + * Counts number of packets dropped by the device due to lack + * of buffer space. This usually indicates that the host interface + * is slower than the network interface, or host is not keeping up + * with the receive packet rate. + * + * This statistic corresponds to hardware events and is not used + * on software devices. + * + * @tx_aborted_errors: + * Part of aggregate "carrier" errors in `/proc/net/dev`. + * For IEEE 802.3 devices capable of half-duplex operation this counter + * must be equivalent to: + * + * - 30.3.1.1.11 aFramesAbortedDueToXSColls + * + * High speed interfaces may use this counter as a general device + * discard counter. + * + * @tx_carrier_errors: Number of frame transmission errors due to loss + * of carrier during transmission. + * Part of aggregate "carrier" errors in `/proc/net/dev`. + * + * For IEEE 802.3 devices this counter must be equivalent to: + * + * - 30.3.1.1.13 aCarrierSenseErrors + * + * @tx_fifo_errors: Number of frame transmission errors due to device + * FIFO underrun / underflow. This condition occurs when the device + * begins transmission of a frame but is unable to deliver the + * entire frame to the transmitter in time for transmission. + * Part of aggregate "carrier" errors in `/proc/net/dev`. + * + * @tx_heartbeat_errors: Number of Heartbeat / SQE Test errors for + * old half-duplex Ethernet. + * Part of aggregate "carrier" errors in `/proc/net/dev`. + * + * For IEEE 802.3 devices possibly equivalent to: + * + * - 30.3.2.1.4 aSQETestErrors + * + * @tx_window_errors: Number of frame transmission errors due + * to late collisions (for Ethernet - after the first 64B of transmission). + * Part of aggregate "carrier" errors in `/proc/net/dev`. + * + * For IEEE 802.3 devices this counter must be equivalent to: + * + * - 30.3.1.1.10 aLateCollisions + * + * @rx_compressed: Number of correctly received compressed packets. + * This counters is only meaningful for interfaces which support + * packet compression (e.g. CSLIP, PPP). + * + * @tx_compressed: Number of transmitted compressed packets. + * This counters is only meaningful for interfaces which support + * packet compression (e.g. CSLIP, PPP). + * + * @rx_nohandler: Number of packets received on the interface + * but dropped by the networking stack because the device is + * not designated to receive packets (e.g. backup link in a bond). + * + * @rx_otherhost_dropped: Number of packets dropped due to mismatch + * in destination MAC address. + */ +struct rtnl_link_stats64 { + __u64 rx_packets; + __u64 tx_packets; + __u64 rx_bytes; + __u64 tx_bytes; + __u64 rx_errors; + __u64 tx_errors; + __u64 rx_dropped; + __u64 tx_dropped; + __u64 multicast; + __u64 collisions; + + /* detailed rx_errors: */ + __u64 rx_length_errors; + __u64 rx_over_errors; + __u64 rx_crc_errors; + __u64 rx_frame_errors; + __u64 rx_fifo_errors; + __u64 rx_missed_errors; + + /* detailed tx_errors */ + __u64 tx_aborted_errors; + __u64 tx_carrier_errors; + __u64 tx_fifo_errors; + __u64 tx_heartbeat_errors; + __u64 tx_window_errors; + + /* for cslip etc */ + __u64 rx_compressed; + __u64 tx_compressed; + __u64 rx_nohandler; + + __u64 rx_otherhost_dropped; +}; + +/* Subset of link stats useful for in-HW collection. Meaning of the fields is as + * for struct rtnl_link_stats64. + */ +struct rtnl_hw_stats64 { + __u64 rx_packets; + __u64 tx_packets; + __u64 rx_bytes; + __u64 tx_bytes; + __u64 rx_errors; + __u64 tx_errors; + __u64 rx_dropped; + __u64 tx_dropped; + __u64 multicast; +}; + +/* The struct should be in sync with struct ifmap */ +struct rtnl_link_ifmap { + __u64 mem_start; + __u64 mem_end; + __u64 base_addr; + __u16 irq; + __u8 dma; + __u8 port; +}; + +/* + * IFLA_AF_SPEC + * Contains nested attributes for address family specific attributes. + * Each address family may create a attribute with the address family + * number as type and create its own attribute structure in it. + * + * Example: + * [IFLA_AF_SPEC] = { + * [AF_INET] = { + * [IFLA_INET_CONF] = ..., + * }, + * [AF_INET6] = { + * [IFLA_INET6_FLAGS] = ..., + * [IFLA_INET6_CONF] = ..., + * } + * } + */ + +enum { + IFLA_UNSPEC, + IFLA_ADDRESS, + IFLA_BROADCAST, + IFLA_IFNAME, + IFLA_MTU, + IFLA_LINK, + IFLA_QDISC, + IFLA_STATS, + IFLA_COST, +#define IFLA_COST IFLA_COST + IFLA_PRIORITY, +#define IFLA_PRIORITY IFLA_PRIORITY + IFLA_MASTER, +#define IFLA_MASTER IFLA_MASTER + IFLA_WIRELESS, /* Wireless Extension event - see wireless.h */ +#define IFLA_WIRELESS IFLA_WIRELESS + IFLA_PROTINFO, /* Protocol specific information for a link */ +#define IFLA_PROTINFO IFLA_PROTINFO + IFLA_TXQLEN, +#define IFLA_TXQLEN IFLA_TXQLEN + IFLA_MAP, +#define IFLA_MAP IFLA_MAP + IFLA_WEIGHT, +#define IFLA_WEIGHT IFLA_WEIGHT + IFLA_OPERSTATE, + IFLA_LINKMODE, + IFLA_LINKINFO, +#define IFLA_LINKINFO IFLA_LINKINFO + IFLA_NET_NS_PID, + IFLA_IFALIAS, + IFLA_NUM_VF, /* Number of VFs if device is SR-IOV PF */ + IFLA_VFINFO_LIST, + IFLA_STATS64, + IFLA_VF_PORTS, + IFLA_PORT_SELF, + IFLA_AF_SPEC, + IFLA_GROUP, /* Group the device belongs to */ + IFLA_NET_NS_FD, + IFLA_EXT_MASK, /* Extended info mask, VFs, etc */ + IFLA_PROMISCUITY, /* Promiscuity count: > 0 means acts PROMISC */ +#define IFLA_PROMISCUITY IFLA_PROMISCUITY + IFLA_NUM_TX_QUEUES, + IFLA_NUM_RX_QUEUES, + IFLA_CARRIER, + IFLA_PHYS_PORT_ID, + IFLA_CARRIER_CHANGES, + IFLA_PHYS_SWITCH_ID, + IFLA_LINK_NETNSID, + IFLA_PHYS_PORT_NAME, + IFLA_PROTO_DOWN, + IFLA_GSO_MAX_SEGS, + IFLA_GSO_MAX_SIZE, + IFLA_PAD, + IFLA_XDP, + IFLA_EVENT, + IFLA_NEW_NETNSID, + IFLA_IF_NETNSID, + IFLA_TARGET_NETNSID = IFLA_IF_NETNSID, /* new alias */ + IFLA_CARRIER_UP_COUNT, + IFLA_CARRIER_DOWN_COUNT, + IFLA_NEW_IFINDEX, + IFLA_MIN_MTU, + IFLA_MAX_MTU, + IFLA_PROP_LIST, + IFLA_ALT_IFNAME, /* Alternative ifname */ + IFLA_PERM_ADDRESS, + IFLA_PROTO_DOWN_REASON, + + /* device (sysfs) name as parent, used instead + * of IFLA_LINK where there's no parent netdev + */ + IFLA_PARENT_DEV_NAME, + IFLA_PARENT_DEV_BUS_NAME, + IFLA_GRO_MAX_SIZE, + IFLA_TSO_MAX_SIZE, + IFLA_TSO_MAX_SEGS, + IFLA_ALLMULTI, /* Allmulti count: > 0 means acts ALLMULTI */ + + IFLA_DEVLINK_PORT, + + IFLA_GSO_IPV4_MAX_SIZE, + IFLA_GRO_IPV4_MAX_SIZE, + IFLA_DPLL_PIN, + IFLA_MAX_PACING_OFFLOAD_HORIZON, + __IFLA_MAX +}; + + +#define IFLA_MAX (__IFLA_MAX - 1) + +enum { + IFLA_PROTO_DOWN_REASON_UNSPEC, + IFLA_PROTO_DOWN_REASON_MASK, /* u32, mask for reason bits */ + IFLA_PROTO_DOWN_REASON_VALUE, /* u32, reason bit value */ + + __IFLA_PROTO_DOWN_REASON_CNT, + IFLA_PROTO_DOWN_REASON_MAX = __IFLA_PROTO_DOWN_REASON_CNT - 1 +}; + +/* backwards compatibility for userspace */ +#ifndef __KERNEL__ +#define IFLA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifinfomsg)))) +#define IFLA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifinfomsg)) +#endif + +enum { + IFLA_INET_UNSPEC, + IFLA_INET_CONF, + __IFLA_INET_MAX, +}; + +#define IFLA_INET_MAX (__IFLA_INET_MAX - 1) + +/* ifi_flags. + + IFF_* flags. + + The only change is: + IFF_LOOPBACK, IFF_BROADCAST and IFF_POINTOPOINT are + more not changeable by user. They describe link media + characteristics and set by device driver. + + Comments: + - Combination IFF_BROADCAST|IFF_POINTOPOINT is invalid + - If neither of these three flags are set; + the interface is NBMA. + + - IFF_MULTICAST does not mean anything special: + multicasts can be used on all not-NBMA links. + IFF_MULTICAST means that this media uses special encapsulation + for multicast frames. Apparently, all IFF_POINTOPOINT and + IFF_BROADCAST devices are able to use multicasts too. + */ + +/* IFLA_LINK. + For usual devices it is equal ifi_index. + If it is a "virtual interface" (f.e. tunnel), ifi_link + can point to real physical interface (f.e. for bandwidth calculations), + or maybe 0, what means, that real media is unknown (usual + for IPIP tunnels, when route to endpoint is allowed to change) + */ + +/* Subtype attributes for IFLA_PROTINFO */ +enum { + IFLA_INET6_UNSPEC, + IFLA_INET6_FLAGS, /* link flags */ + IFLA_INET6_CONF, /* sysctl parameters */ + IFLA_INET6_STATS, /* statistics */ + IFLA_INET6_MCAST, /* MC things. What of them? */ + IFLA_INET6_CACHEINFO, /* time values and max reasm size */ + IFLA_INET6_ICMP6STATS, /* statistics (icmpv6) */ + IFLA_INET6_TOKEN, /* device token */ + IFLA_INET6_ADDR_GEN_MODE, /* implicit address generator mode */ + IFLA_INET6_RA_MTU, /* mtu carried in the RA message */ + __IFLA_INET6_MAX +}; + +#define IFLA_INET6_MAX (__IFLA_INET6_MAX - 1) + +enum in6_addr_gen_mode { + IN6_ADDR_GEN_MODE_EUI64, + IN6_ADDR_GEN_MODE_NONE, + IN6_ADDR_GEN_MODE_STABLE_PRIVACY, + IN6_ADDR_GEN_MODE_RANDOM, +}; + +/* Bridge section */ + +/** + * DOC: Bridge enum definition + * + * Please *note* that the timer values in the following section are expected + * in clock_t format, which is seconds multiplied by USER_HZ (generally + * defined as 100). + * + * @IFLA_BR_FORWARD_DELAY + * The bridge forwarding delay is the time spent in LISTENING state + * (before moving to LEARNING) and in LEARNING state (before moving + * to FORWARDING). Only relevant if STP is enabled. + * + * The valid values are between (2 * USER_HZ) and (30 * USER_HZ). + * The default value is (15 * USER_HZ). + * + * @IFLA_BR_HELLO_TIME + * The time between hello packets sent by the bridge, when it is a root + * bridge or a designated bridge. Only relevant if STP is enabled. + * + * The valid values are between (1 * USER_HZ) and (10 * USER_HZ). + * The default value is (2 * USER_HZ). + * + * @IFLA_BR_MAX_AGE + * The hello packet timeout is the time until another bridge in the + * spanning tree is assumed to be dead, after reception of its last hello + * message. Only relevant if STP is enabled. + * + * The valid values are between (6 * USER_HZ) and (40 * USER_HZ). + * The default value is (20 * USER_HZ). + * + * @IFLA_BR_AGEING_TIME + * Configure the bridge's FDB entries aging time. It is the time a MAC + * address will be kept in the FDB after a packet has been received from + * that address. After this time has passed, entries are cleaned up. + * Allow values outside the 802.1 standard specification for special cases: + * + * * 0 - entry never ages (all permanent) + * * 1 - entry disappears (no persistence) + * + * The default value is (300 * USER_HZ). + * + * @IFLA_BR_STP_STATE + * Turn spanning tree protocol on (*IFLA_BR_STP_STATE* > 0) or off + * (*IFLA_BR_STP_STATE* == 0) for this bridge. + * + * The default value is 0 (disabled). + * + * @IFLA_BR_PRIORITY + * Set this bridge's spanning tree priority, used during STP root bridge + * election. + * + * The valid values are between 0 and 65535. + * + * @IFLA_BR_VLAN_FILTERING + * Turn VLAN filtering on (*IFLA_BR_VLAN_FILTERING* > 0) or off + * (*IFLA_BR_VLAN_FILTERING* == 0). When disabled, the bridge will not + * consider the VLAN tag when handling packets. + * + * The default value is 0 (disabled). + * + * @IFLA_BR_VLAN_PROTOCOL + * Set the protocol used for VLAN filtering. + * + * The valid values are 0x8100(802.1Q) or 0x88A8(802.1AD). The default value + * is 0x8100(802.1Q). + * + * @IFLA_BR_GROUP_FWD_MASK + * The group forwarding mask. This is the bitmask that is applied to + * decide whether to forward incoming frames destined to link-local + * addresses (of the form 01:80:C2:00:00:0X). + * + * The default value is 0, which means the bridge does not forward any + * link-local frames coming on this port. + * + * @IFLA_BR_ROOT_ID + * The bridge root id, read only. + * + * @IFLA_BR_BRIDGE_ID + * The bridge id, read only. + * + * @IFLA_BR_ROOT_PORT + * The bridge root port, read only. + * + * @IFLA_BR_ROOT_PATH_COST + * The bridge root path cost, read only. + * + * @IFLA_BR_TOPOLOGY_CHANGE + * The bridge topology change, read only. + * + * @IFLA_BR_TOPOLOGY_CHANGE_DETECTED + * The bridge topology change detected, read only. + * + * @IFLA_BR_HELLO_TIMER + * The bridge hello timer, read only. + * + * @IFLA_BR_TCN_TIMER + * The bridge tcn timer, read only. + * + * @IFLA_BR_TOPOLOGY_CHANGE_TIMER + * The bridge topology change timer, read only. + * + * @IFLA_BR_GC_TIMER + * The bridge gc timer, read only. + * + * @IFLA_BR_GROUP_ADDR + * Set the MAC address of the multicast group this bridge uses for STP. + * The address must be a link-local address in standard Ethernet MAC address + * format. It is an address of the form 01:80:C2:00:00:0X, with X in [0, 4..f]. + * + * The default value is 0. + * + * @IFLA_BR_FDB_FLUSH + * Flush bridge's fdb dynamic entries. + * + * @IFLA_BR_MCAST_ROUTER + * Set bridge's multicast router if IGMP snooping is enabled. + * The valid values are: + * + * * 0 - disabled. + * * 1 - automatic (queried). + * * 2 - permanently enabled. + * + * The default value is 1. + * + * @IFLA_BR_MCAST_SNOOPING + * Turn multicast snooping on (*IFLA_BR_MCAST_SNOOPING* > 0) or off + * (*IFLA_BR_MCAST_SNOOPING* == 0). + * + * The default value is 1. + * + * @IFLA_BR_MCAST_QUERY_USE_IFADDR + * If enabled use the bridge's own IP address as source address for IGMP + * queries (*IFLA_BR_MCAST_QUERY_USE_IFADDR* > 0) or the default of 0.0.0.0 + * (*IFLA_BR_MCAST_QUERY_USE_IFADDR* == 0). + * + * The default value is 0 (disabled). + * + * @IFLA_BR_MCAST_QUERIER + * Enable (*IFLA_BR_MULTICAST_QUERIER* > 0) or disable + * (*IFLA_BR_MULTICAST_QUERIER* == 0) IGMP querier, ie sending of multicast + * queries by the bridge. + * + * The default value is 0 (disabled). + * + * @IFLA_BR_MCAST_HASH_ELASTICITY + * Set multicast database hash elasticity, It is the maximum chain length in + * the multicast hash table. This attribute is *deprecated* and the value + * is always 16. + * + * @IFLA_BR_MCAST_HASH_MAX + * Set maximum size of the multicast hash table + * + * The default value is 4096, the value must be a power of 2. + * + * @IFLA_BR_MCAST_LAST_MEMBER_CNT + * The Last Member Query Count is the number of Group-Specific Queries + * sent before the router assumes there are no local members. The Last + * Member Query Count is also the number of Group-and-Source-Specific + * Queries sent before the router assumes there are no listeners for a + * particular source. + * + * The default value is 2. + * + * @IFLA_BR_MCAST_STARTUP_QUERY_CNT + * The Startup Query Count is the number of Queries sent out on startup, + * separated by the Startup Query Interval. + * + * The default value is 2. + * + * @IFLA_BR_MCAST_LAST_MEMBER_INTVL + * The Last Member Query Interval is the Max Response Time inserted into + * Group-Specific Queries sent in response to Leave Group messages, and + * is also the amount of time between Group-Specific Query messages. + * + * The default value is (1 * USER_HZ). + * + * @IFLA_BR_MCAST_MEMBERSHIP_INTVL + * The interval after which the bridge will leave a group, if no membership + * reports for this group are received. + * + * The default value is (260 * USER_HZ). + * + * @IFLA_BR_MCAST_QUERIER_INTVL + * The interval between queries sent by other routers. if no queries are + * seen after this delay has passed, the bridge will start to send its own + * queries (as if *IFLA_BR_MCAST_QUERIER_INTVL* was enabled). + * + * The default value is (255 * USER_HZ). + * + * @IFLA_BR_MCAST_QUERY_INTVL + * The Query Interval is the interval between General Queries sent by + * the Querier. + * + * The default value is (125 * USER_HZ). The minimum value is (1 * USER_HZ). + * + * @IFLA_BR_MCAST_QUERY_RESPONSE_INTVL + * The Max Response Time used to calculate the Max Resp Code inserted + * into the periodic General Queries. + * + * The default value is (10 * USER_HZ). + * + * @IFLA_BR_MCAST_STARTUP_QUERY_INTVL + * The interval between queries in the startup phase. + * + * The default value is (125 * USER_HZ) / 4. The minimum value is (1 * USER_HZ). + * + * @IFLA_BR_NF_CALL_IPTABLES + * Enable (*NF_CALL_IPTABLES* > 0) or disable (*NF_CALL_IPTABLES* == 0) + * iptables hooks on the bridge. + * + * The default value is 0 (disabled). + * + * @IFLA_BR_NF_CALL_IP6TABLES + * Enable (*NF_CALL_IP6TABLES* > 0) or disable (*NF_CALL_IP6TABLES* == 0) + * ip6tables hooks on the bridge. + * + * The default value is 0 (disabled). + * + * @IFLA_BR_NF_CALL_ARPTABLES + * Enable (*NF_CALL_ARPTABLES* > 0) or disable (*NF_CALL_ARPTABLES* == 0) + * arptables hooks on the bridge. + * + * The default value is 0 (disabled). + * + * @IFLA_BR_VLAN_DEFAULT_PVID + * VLAN ID applied to untagged and priority-tagged incoming packets. + * + * The default value is 1. Setting to the special value 0 makes all ports of + * this bridge not have a PVID by default, which means that they will + * not accept VLAN-untagged traffic. + * + * @IFLA_BR_PAD + * Bridge attribute padding type for netlink message. + * + * @IFLA_BR_VLAN_STATS_ENABLED + * Enable (*IFLA_BR_VLAN_STATS_ENABLED* == 1) or disable + * (*IFLA_BR_VLAN_STATS_ENABLED* == 0) per-VLAN stats accounting. + * + * The default value is 0 (disabled). + * + * @IFLA_BR_MCAST_STATS_ENABLED + * Enable (*IFLA_BR_MCAST_STATS_ENABLED* > 0) or disable + * (*IFLA_BR_MCAST_STATS_ENABLED* == 0) multicast (IGMP/MLD) stats + * accounting. + * + * The default value is 0 (disabled). + * + * @IFLA_BR_MCAST_IGMP_VERSION + * Set the IGMP version. + * + * The valid values are 2 and 3. The default value is 2. + * + * @IFLA_BR_MCAST_MLD_VERSION + * Set the MLD version. + * + * The valid values are 1 and 2. The default value is 1. + * + * @IFLA_BR_VLAN_STATS_PER_PORT + * Enable (*IFLA_BR_VLAN_STATS_PER_PORT* == 1) or disable + * (*IFLA_BR_VLAN_STATS_PER_PORT* == 0) per-VLAN per-port stats accounting. + * Can be changed only when there are no port VLANs configured. + * + * The default value is 0 (disabled). + * + * @IFLA_BR_MULTI_BOOLOPT + * The multi_boolopt is used to control new boolean options to avoid adding + * new netlink attributes. You can look at ``enum br_boolopt_id`` for those + * options. + * + * @IFLA_BR_MCAST_QUERIER_STATE + * Bridge mcast querier states, read only. + * + * @IFLA_BR_FDB_N_LEARNED + * The number of dynamically learned FDB entries for the current bridge, + * read only. + * + * @IFLA_BR_FDB_MAX_LEARNED + * Set the number of max dynamically learned FDB entries for the current + * bridge. + */ +enum { + IFLA_BR_UNSPEC, + IFLA_BR_FORWARD_DELAY, + IFLA_BR_HELLO_TIME, + IFLA_BR_MAX_AGE, + IFLA_BR_AGEING_TIME, + IFLA_BR_STP_STATE, + IFLA_BR_PRIORITY, + IFLA_BR_VLAN_FILTERING, + IFLA_BR_VLAN_PROTOCOL, + IFLA_BR_GROUP_FWD_MASK, + IFLA_BR_ROOT_ID, + IFLA_BR_BRIDGE_ID, + IFLA_BR_ROOT_PORT, + IFLA_BR_ROOT_PATH_COST, + IFLA_BR_TOPOLOGY_CHANGE, + IFLA_BR_TOPOLOGY_CHANGE_DETECTED, + IFLA_BR_HELLO_TIMER, + IFLA_BR_TCN_TIMER, + IFLA_BR_TOPOLOGY_CHANGE_TIMER, + IFLA_BR_GC_TIMER, + IFLA_BR_GROUP_ADDR, + IFLA_BR_FDB_FLUSH, + IFLA_BR_MCAST_ROUTER, + IFLA_BR_MCAST_SNOOPING, + IFLA_BR_MCAST_QUERY_USE_IFADDR, + IFLA_BR_MCAST_QUERIER, + IFLA_BR_MCAST_HASH_ELASTICITY, + IFLA_BR_MCAST_HASH_MAX, + IFLA_BR_MCAST_LAST_MEMBER_CNT, + IFLA_BR_MCAST_STARTUP_QUERY_CNT, + IFLA_BR_MCAST_LAST_MEMBER_INTVL, + IFLA_BR_MCAST_MEMBERSHIP_INTVL, + IFLA_BR_MCAST_QUERIER_INTVL, + IFLA_BR_MCAST_QUERY_INTVL, + IFLA_BR_MCAST_QUERY_RESPONSE_INTVL, + IFLA_BR_MCAST_STARTUP_QUERY_INTVL, + IFLA_BR_NF_CALL_IPTABLES, + IFLA_BR_NF_CALL_IP6TABLES, + IFLA_BR_NF_CALL_ARPTABLES, + IFLA_BR_VLAN_DEFAULT_PVID, + IFLA_BR_PAD, + IFLA_BR_VLAN_STATS_ENABLED, + IFLA_BR_MCAST_STATS_ENABLED, + IFLA_BR_MCAST_IGMP_VERSION, + IFLA_BR_MCAST_MLD_VERSION, + IFLA_BR_VLAN_STATS_PER_PORT, + IFLA_BR_MULTI_BOOLOPT, + IFLA_BR_MCAST_QUERIER_STATE, + IFLA_BR_FDB_N_LEARNED, + IFLA_BR_FDB_MAX_LEARNED, + __IFLA_BR_MAX, +}; + +#define IFLA_BR_MAX (__IFLA_BR_MAX - 1) + +struct ifla_bridge_id { + __u8 prio[2]; + __u8 addr[6]; /* ETH_ALEN */ +}; + +/** + * DOC: Bridge mode enum definition + * + * @BRIDGE_MODE_HAIRPIN + * Controls whether traffic may be sent back out of the port on which it + * was received. This option is also called reflective relay mode, and is + * used to support basic VEPA (Virtual Ethernet Port Aggregator) + * capabilities. By default, this flag is turned off and the bridge will + * not forward traffic back out of the receiving port. + */ +enum { + BRIDGE_MODE_UNSPEC, + BRIDGE_MODE_HAIRPIN, +}; + +/** + * DOC: Bridge port enum definition + * + * @IFLA_BRPORT_STATE + * The operation state of the port. Here are the valid values. + * + * * 0 - port is in STP *DISABLED* state. Make this port completely + * inactive for STP. This is also called BPDU filter and could be used + * to disable STP on an untrusted port, like a leaf virtual device. + * The traffic forwarding is also stopped on this port. + * * 1 - port is in STP *LISTENING* state. Only valid if STP is enabled + * on the bridge. In this state the port listens for STP BPDUs and + * drops all other traffic frames. + * * 2 - port is in STP *LEARNING* state. Only valid if STP is enabled on + * the bridge. In this state the port will accept traffic only for the + * purpose of updating MAC address tables. + * * 3 - port is in STP *FORWARDING* state. Port is fully active. + * * 4 - port is in STP *BLOCKING* state. Only valid if STP is enabled on + * the bridge. This state is used during the STP election process. + * In this state, port will only process STP BPDUs. + * + * @IFLA_BRPORT_PRIORITY + * The STP port priority. The valid values are between 0 and 255. + * + * @IFLA_BRPORT_COST + * The STP path cost of the port. The valid values are between 1 and 65535. + * + * @IFLA_BRPORT_MODE + * Set the bridge port mode. See *BRIDGE_MODE_HAIRPIN* for more details. + * + * @IFLA_BRPORT_GUARD + * Controls whether STP BPDUs will be processed by the bridge port. By + * default, the flag is turned off to allow BPDU processing. Turning this + * flag on will disable the bridge port if a STP BPDU packet is received. + * + * If the bridge has Spanning Tree enabled, hostile devices on the network + * may send BPDU on a port and cause network failure. Setting *guard on* + * will detect and stop this by disabling the port. The port will be + * restarted if the link is brought down, or removed and reattached. + * + * @IFLA_BRPORT_PROTECT + * Controls whether a given port is allowed to become a root port or not. + * Only used when STP is enabled on the bridge. By default the flag is off. + * + * This feature is also called root port guard. If BPDU is received from a + * leaf (edge) port, it should not be elected as root port. This could + * be used if using STP on a bridge and the downstream bridges are not fully + * trusted; this prevents a hostile guest from rerouting traffic. + * + * @IFLA_BRPORT_FAST_LEAVE + * This flag allows the bridge to immediately stop multicast traffic + * forwarding on a port that receives an IGMP Leave message. It is only used + * when IGMP snooping is enabled on the bridge. By default the flag is off. + * + * @IFLA_BRPORT_LEARNING + * Controls whether a given port will learn *source* MAC addresses from + * received traffic or not. Also controls whether dynamic FDB entries + * (which can also be added by software) will be refreshed by incoming + * traffic. By default this flag is on. + * + * @IFLA_BRPORT_UNICAST_FLOOD + * Controls whether unicast traffic for which there is no FDB entry will + * be flooded towards this port. By default this flag is on. + * + * @IFLA_BRPORT_PROXYARP + * Enable proxy ARP on this port. + * + * @IFLA_BRPORT_LEARNING_SYNC + * Controls whether a given port will sync MAC addresses learned on device + * port to bridge FDB. + * + * @IFLA_BRPORT_PROXYARP_WIFI + * Enable proxy ARP on this port which meets extended requirements by + * IEEE 802.11 and Hotspot 2.0 specifications. + * + * @IFLA_BRPORT_ROOT_ID + * + * @IFLA_BRPORT_BRIDGE_ID + * + * @IFLA_BRPORT_DESIGNATED_PORT + * + * @IFLA_BRPORT_DESIGNATED_COST + * + * @IFLA_BRPORT_ID + * + * @IFLA_BRPORT_NO + * + * @IFLA_BRPORT_TOPOLOGY_CHANGE_ACK + * + * @IFLA_BRPORT_CONFIG_PENDING + * + * @IFLA_BRPORT_MESSAGE_AGE_TIMER + * + * @IFLA_BRPORT_FORWARD_DELAY_TIMER + * + * @IFLA_BRPORT_HOLD_TIMER + * + * @IFLA_BRPORT_FLUSH + * Flush bridge ports' fdb dynamic entries. + * + * @IFLA_BRPORT_MULTICAST_ROUTER + * Configure the port's multicast router presence. A port with + * a multicast router will receive all multicast traffic. + * The valid values are: + * + * * 0 disable multicast routers on this port + * * 1 let the system detect the presence of routers (default) + * * 2 permanently enable multicast traffic forwarding on this port + * * 3 enable multicast routers temporarily on this port, not depending + * on incoming queries. + * + * @IFLA_BRPORT_PAD + * + * @IFLA_BRPORT_MCAST_FLOOD + * Controls whether a given port will flood multicast traffic for which + * there is no MDB entry. By default this flag is on. + * + * @IFLA_BRPORT_MCAST_TO_UCAST + * Controls whether a given port will replicate packets using unicast + * instead of multicast. By default this flag is off. + * + * This is done by copying the packet per host and changing the multicast + * destination MAC to a unicast one accordingly. + * + * *mcast_to_unicast* works on top of the multicast snooping feature of the + * bridge. Which means unicast copies are only delivered to hosts which + * are interested in unicast and signaled this via IGMP/MLD reports previously. + * + * This feature is intended for interface types which have a more reliable + * and/or efficient way to deliver unicast packets than broadcast ones + * (e.g. WiFi). + * + * However, it should only be enabled on interfaces where no IGMPv2/MLDv1 + * report suppression takes place. IGMP/MLD report suppression issue is + * usually overcome by the network daemon (supplicant) enabling AP isolation + * and by that separating all STAs. + * + * Delivery of STA-to-STA IP multicast is made possible again by enabling + * and utilizing the bridge hairpin mode, which considers the incoming port + * as a potential outgoing port, too (see *BRIDGE_MODE_HAIRPIN* option). + * Hairpin mode is performed after multicast snooping, therefore leading + * to only deliver reports to STAs running a multicast router. + * + * @IFLA_BRPORT_VLAN_TUNNEL + * Controls whether vlan to tunnel mapping is enabled on the port. + * By default this flag is off. + * + * @IFLA_BRPORT_BCAST_FLOOD + * Controls flooding of broadcast traffic on the given port. By default + * this flag is on. + * + * @IFLA_BRPORT_GROUP_FWD_MASK + * Set the group forward mask. This is a bitmask that is applied to + * decide whether to forward incoming frames destined to link-local + * addresses. The addresses of the form are 01:80:C2:00:00:0X (defaults + * to 0, which means the bridge does not forward any link-local frames + * coming on this port). + * + * @IFLA_BRPORT_NEIGH_SUPPRESS + * Controls whether neighbor discovery (arp and nd) proxy and suppression + * is enabled on the port. By default this flag is off. + * + * @IFLA_BRPORT_ISOLATED + * Controls whether a given port will be isolated, which means it will be + * able to communicate with non-isolated ports only. By default this + * flag is off. + * + * @IFLA_BRPORT_BACKUP_PORT + * Set a backup port. If the port loses carrier all traffic will be + * redirected to the configured backup port. Set the value to 0 to disable + * it. + * + * @IFLA_BRPORT_MRP_RING_OPEN + * + * @IFLA_BRPORT_MRP_IN_OPEN + * + * @IFLA_BRPORT_MCAST_EHT_HOSTS_LIMIT + * The number of per-port EHT hosts limit. The default value is 512. + * Setting to 0 is not allowed. + * + * @IFLA_BRPORT_MCAST_EHT_HOSTS_CNT + * The current number of tracked hosts, read only. + * + * @IFLA_BRPORT_LOCKED + * Controls whether a port will be locked, meaning that hosts behind the + * port will not be able to communicate through the port unless an FDB + * entry with the unit's MAC address is in the FDB. The common use case is + * that hosts are allowed access through authentication with the IEEE 802.1X + * protocol or based on whitelists. By default this flag is off. + * + * Please note that secure 802.1X deployments should always use the + * *BR_BOOLOPT_NO_LL_LEARN* flag, to not permit the bridge to populate its + * FDB based on link-local (EAPOL) traffic received on the port. + * + * @IFLA_BRPORT_MAB + * Controls whether a port will use MAC Authentication Bypass (MAB), a + * technique through which select MAC addresses may be allowed on a locked + * port, without using 802.1X authentication. Packets with an unknown source + * MAC address generates a "locked" FDB entry on the incoming bridge port. + * The common use case is for user space to react to these bridge FDB + * notifications and optionally replace the locked FDB entry with a normal + * one, allowing traffic to pass for whitelisted MAC addresses. + * + * Setting this flag also requires *IFLA_BRPORT_LOCKED* and + * *IFLA_BRPORT_LEARNING*. *IFLA_BRPORT_LOCKED* ensures that unauthorized + * data packets are dropped, and *IFLA_BRPORT_LEARNING* allows the dynamic + * FDB entries installed by user space (as replacements for the locked FDB + * entries) to be refreshed and/or aged out. + * + * @IFLA_BRPORT_MCAST_N_GROUPS + * + * @IFLA_BRPORT_MCAST_MAX_GROUPS + * Sets the maximum number of MDB entries that can be registered for a + * given port. Attempts to register more MDB entries at the port than this + * limit allows will be rejected, whether they are done through netlink + * (e.g. the bridge tool), or IGMP or MLD membership reports. Setting a + * limit of 0 disables the limit. The default value is 0. + * + * @IFLA_BRPORT_NEIGH_VLAN_SUPPRESS + * Controls whether neighbor discovery (arp and nd) proxy and suppression is + * enabled for a given port. By default this flag is off. + * + * Note that this option only takes effect when *IFLA_BRPORT_NEIGH_SUPPRESS* + * is enabled for a given port. + * + * @IFLA_BRPORT_BACKUP_NHID + * The FDB nexthop object ID to attach to packets being redirected to a + * backup port that has VLAN tunnel mapping enabled (via the + * *IFLA_BRPORT_VLAN_TUNNEL* option). Setting a value of 0 (default) has + * the effect of not attaching any ID. + */ +enum { + IFLA_BRPORT_UNSPEC, + IFLA_BRPORT_STATE, /* Spanning tree state */ + IFLA_BRPORT_PRIORITY, /* " priority */ + IFLA_BRPORT_COST, /* " cost */ + IFLA_BRPORT_MODE, /* mode (hairpin) */ + IFLA_BRPORT_GUARD, /* bpdu guard */ + IFLA_BRPORT_PROTECT, /* root port protection */ + IFLA_BRPORT_FAST_LEAVE, /* multicast fast leave */ + IFLA_BRPORT_LEARNING, /* mac learning */ + IFLA_BRPORT_UNICAST_FLOOD, /* flood unicast traffic */ + IFLA_BRPORT_PROXYARP, /* proxy ARP */ + IFLA_BRPORT_LEARNING_SYNC, /* mac learning sync from device */ + IFLA_BRPORT_PROXYARP_WIFI, /* proxy ARP for Wi-Fi */ + IFLA_BRPORT_ROOT_ID, /* designated root */ + IFLA_BRPORT_BRIDGE_ID, /* designated bridge */ + IFLA_BRPORT_DESIGNATED_PORT, + IFLA_BRPORT_DESIGNATED_COST, + IFLA_BRPORT_ID, + IFLA_BRPORT_NO, + IFLA_BRPORT_TOPOLOGY_CHANGE_ACK, + IFLA_BRPORT_CONFIG_PENDING, + IFLA_BRPORT_MESSAGE_AGE_TIMER, + IFLA_BRPORT_FORWARD_DELAY_TIMER, + IFLA_BRPORT_HOLD_TIMER, + IFLA_BRPORT_FLUSH, + IFLA_BRPORT_MULTICAST_ROUTER, + IFLA_BRPORT_PAD, + IFLA_BRPORT_MCAST_FLOOD, + IFLA_BRPORT_MCAST_TO_UCAST, + IFLA_BRPORT_VLAN_TUNNEL, + IFLA_BRPORT_BCAST_FLOOD, + IFLA_BRPORT_GROUP_FWD_MASK, + IFLA_BRPORT_NEIGH_SUPPRESS, + IFLA_BRPORT_ISOLATED, + IFLA_BRPORT_BACKUP_PORT, + IFLA_BRPORT_MRP_RING_OPEN, + IFLA_BRPORT_MRP_IN_OPEN, + IFLA_BRPORT_MCAST_EHT_HOSTS_LIMIT, + IFLA_BRPORT_MCAST_EHT_HOSTS_CNT, + IFLA_BRPORT_LOCKED, + IFLA_BRPORT_MAB, + IFLA_BRPORT_MCAST_N_GROUPS, + IFLA_BRPORT_MCAST_MAX_GROUPS, + IFLA_BRPORT_NEIGH_VLAN_SUPPRESS, + IFLA_BRPORT_BACKUP_NHID, + __IFLA_BRPORT_MAX +}; +#define IFLA_BRPORT_MAX (__IFLA_BRPORT_MAX - 1) + +struct ifla_cacheinfo { + __u32 max_reasm_len; + __u32 tstamp; /* ipv6InterfaceTable updated timestamp */ + __u32 reachable_time; + __u32 retrans_time; +}; + +enum { + IFLA_INFO_UNSPEC, + IFLA_INFO_KIND, + IFLA_INFO_DATA, + IFLA_INFO_XSTATS, + IFLA_INFO_SLAVE_KIND, + IFLA_INFO_SLAVE_DATA, + __IFLA_INFO_MAX, +}; + +#define IFLA_INFO_MAX (__IFLA_INFO_MAX - 1) + +/* VLAN section */ + +enum { + IFLA_VLAN_UNSPEC, + IFLA_VLAN_ID, + IFLA_VLAN_FLAGS, + IFLA_VLAN_EGRESS_QOS, + IFLA_VLAN_INGRESS_QOS, + IFLA_VLAN_PROTOCOL, + __IFLA_VLAN_MAX, +}; + +#define IFLA_VLAN_MAX (__IFLA_VLAN_MAX - 1) + +struct ifla_vlan_flags { + __u32 flags; + __u32 mask; +}; + +enum { + IFLA_VLAN_QOS_UNSPEC, + IFLA_VLAN_QOS_MAPPING, + __IFLA_VLAN_QOS_MAX +}; + +#define IFLA_VLAN_QOS_MAX (__IFLA_VLAN_QOS_MAX - 1) + +struct ifla_vlan_qos_mapping { + __u32 from; + __u32 to; +}; + +/* MACVLAN section */ +enum { + IFLA_MACVLAN_UNSPEC, + IFLA_MACVLAN_MODE, + IFLA_MACVLAN_FLAGS, + IFLA_MACVLAN_MACADDR_MODE, + IFLA_MACVLAN_MACADDR, + IFLA_MACVLAN_MACADDR_DATA, + IFLA_MACVLAN_MACADDR_COUNT, + IFLA_MACVLAN_BC_QUEUE_LEN, + IFLA_MACVLAN_BC_QUEUE_LEN_USED, + IFLA_MACVLAN_BC_CUTOFF, + __IFLA_MACVLAN_MAX, +}; + +#define IFLA_MACVLAN_MAX (__IFLA_MACVLAN_MAX - 1) + +enum macvlan_mode { + MACVLAN_MODE_PRIVATE = 1, /* don't talk to other macvlans */ + MACVLAN_MODE_VEPA = 2, /* talk to other ports through ext bridge */ + MACVLAN_MODE_BRIDGE = 4, /* talk to bridge ports directly */ + MACVLAN_MODE_PASSTHRU = 8,/* take over the underlying device */ + MACVLAN_MODE_SOURCE = 16,/* use source MAC address list to assign */ +}; + +enum macvlan_macaddr_mode { + MACVLAN_MACADDR_ADD, + MACVLAN_MACADDR_DEL, + MACVLAN_MACADDR_FLUSH, + MACVLAN_MACADDR_SET, +}; + +#define MACVLAN_FLAG_NOPROMISC 1 +#define MACVLAN_FLAG_NODST 2 /* skip dst macvlan if matching src macvlan */ + +/* VRF section */ +enum { + IFLA_VRF_UNSPEC, + IFLA_VRF_TABLE, + __IFLA_VRF_MAX +}; + +#define IFLA_VRF_MAX (__IFLA_VRF_MAX - 1) + +enum { + IFLA_VRF_PORT_UNSPEC, + IFLA_VRF_PORT_TABLE, + __IFLA_VRF_PORT_MAX +}; + +#define IFLA_VRF_PORT_MAX (__IFLA_VRF_PORT_MAX - 1) + +/* MACSEC section */ +enum { + IFLA_MACSEC_UNSPEC, + IFLA_MACSEC_SCI, + IFLA_MACSEC_PORT, + IFLA_MACSEC_ICV_LEN, + IFLA_MACSEC_CIPHER_SUITE, + IFLA_MACSEC_WINDOW, + IFLA_MACSEC_ENCODING_SA, + IFLA_MACSEC_ENCRYPT, + IFLA_MACSEC_PROTECT, + IFLA_MACSEC_INC_SCI, + IFLA_MACSEC_ES, + IFLA_MACSEC_SCB, + IFLA_MACSEC_REPLAY_PROTECT, + IFLA_MACSEC_VALIDATION, + IFLA_MACSEC_PAD, + IFLA_MACSEC_OFFLOAD, + __IFLA_MACSEC_MAX, +}; + +#define IFLA_MACSEC_MAX (__IFLA_MACSEC_MAX - 1) + +/* XFRM section */ +enum { + IFLA_XFRM_UNSPEC, + IFLA_XFRM_LINK, + IFLA_XFRM_IF_ID, + IFLA_XFRM_COLLECT_METADATA, + __IFLA_XFRM_MAX +}; + +#define IFLA_XFRM_MAX (__IFLA_XFRM_MAX - 1) + +enum macsec_validation_type { + MACSEC_VALIDATE_DISABLED = 0, + MACSEC_VALIDATE_CHECK = 1, + MACSEC_VALIDATE_STRICT = 2, + __MACSEC_VALIDATE_END, + MACSEC_VALIDATE_MAX = __MACSEC_VALIDATE_END - 1, +}; + +enum macsec_offload { + MACSEC_OFFLOAD_OFF = 0, + MACSEC_OFFLOAD_PHY = 1, + MACSEC_OFFLOAD_MAC = 2, + __MACSEC_OFFLOAD_END, + MACSEC_OFFLOAD_MAX = __MACSEC_OFFLOAD_END - 1, +}; + +/* IPVLAN section */ +enum { + IFLA_IPVLAN_UNSPEC, + IFLA_IPVLAN_MODE, + IFLA_IPVLAN_FLAGS, + __IFLA_IPVLAN_MAX +}; + +#define IFLA_IPVLAN_MAX (__IFLA_IPVLAN_MAX - 1) + +enum ipvlan_mode { + IPVLAN_MODE_L2 = 0, + IPVLAN_MODE_L3, + IPVLAN_MODE_L3S, + IPVLAN_MODE_MAX +}; + +#define IPVLAN_F_PRIVATE 0x01 +#define IPVLAN_F_VEPA 0x02 + +/* Tunnel RTM header */ +struct tunnel_msg { + __u8 family; + __u8 flags; + __u16 reserved2; + __u32 ifindex; +}; + +/* netkit section */ +enum netkit_action { + NETKIT_NEXT = -1, + NETKIT_PASS = 0, + NETKIT_DROP = 2, + NETKIT_REDIRECT = 7, +}; + +enum netkit_mode { + NETKIT_L2, + NETKIT_L3, +}; + +/* NETKIT_SCRUB_NONE leaves clearing skb->{mark,priority} up to + * the BPF program if attached. This also means the latter can + * consume the two fields if they were populated earlier. + * + * NETKIT_SCRUB_DEFAULT zeroes skb->{mark,priority} fields before + * invoking the attached BPF program when the peer device resides + * in a different network namespace. This is the default behavior. + */ +enum netkit_scrub { + NETKIT_SCRUB_NONE, + NETKIT_SCRUB_DEFAULT, +}; + +enum { + IFLA_NETKIT_UNSPEC, + IFLA_NETKIT_PEER_INFO, + IFLA_NETKIT_PRIMARY, + IFLA_NETKIT_POLICY, + IFLA_NETKIT_PEER_POLICY, + IFLA_NETKIT_MODE, + IFLA_NETKIT_SCRUB, + IFLA_NETKIT_PEER_SCRUB, + IFLA_NETKIT_HEADROOM, + IFLA_NETKIT_TAILROOM, + __IFLA_NETKIT_MAX, +}; +#define IFLA_NETKIT_MAX (__IFLA_NETKIT_MAX - 1) + +/* VXLAN section */ + +/* include statistics in the dump */ +#define TUNNEL_MSG_FLAG_STATS 0x01 + +#define TUNNEL_MSG_VALID_USER_FLAGS TUNNEL_MSG_FLAG_STATS + +/* Embedded inside VXLAN_VNIFILTER_ENTRY_STATS */ +enum { + VNIFILTER_ENTRY_STATS_UNSPEC, + VNIFILTER_ENTRY_STATS_RX_BYTES, + VNIFILTER_ENTRY_STATS_RX_PKTS, + VNIFILTER_ENTRY_STATS_RX_DROPS, + VNIFILTER_ENTRY_STATS_RX_ERRORS, + VNIFILTER_ENTRY_STATS_TX_BYTES, + VNIFILTER_ENTRY_STATS_TX_PKTS, + VNIFILTER_ENTRY_STATS_TX_DROPS, + VNIFILTER_ENTRY_STATS_TX_ERRORS, + VNIFILTER_ENTRY_STATS_PAD, + __VNIFILTER_ENTRY_STATS_MAX +}; +#define VNIFILTER_ENTRY_STATS_MAX (__VNIFILTER_ENTRY_STATS_MAX - 1) + +enum { + VXLAN_VNIFILTER_ENTRY_UNSPEC, + VXLAN_VNIFILTER_ENTRY_START, + VXLAN_VNIFILTER_ENTRY_END, + VXLAN_VNIFILTER_ENTRY_GROUP, + VXLAN_VNIFILTER_ENTRY_GROUP6, + VXLAN_VNIFILTER_ENTRY_STATS, + __VXLAN_VNIFILTER_ENTRY_MAX +}; +#define VXLAN_VNIFILTER_ENTRY_MAX (__VXLAN_VNIFILTER_ENTRY_MAX - 1) + +enum { + VXLAN_VNIFILTER_UNSPEC, + VXLAN_VNIFILTER_ENTRY, + __VXLAN_VNIFILTER_MAX +}; +#define VXLAN_VNIFILTER_MAX (__VXLAN_VNIFILTER_MAX - 1) + +enum { + IFLA_VXLAN_UNSPEC, + IFLA_VXLAN_ID, + IFLA_VXLAN_GROUP, /* group or remote address */ + IFLA_VXLAN_LINK, + IFLA_VXLAN_LOCAL, + IFLA_VXLAN_TTL, + IFLA_VXLAN_TOS, + IFLA_VXLAN_LEARNING, + IFLA_VXLAN_AGEING, + IFLA_VXLAN_LIMIT, + IFLA_VXLAN_PORT_RANGE, /* source port */ + IFLA_VXLAN_PROXY, + IFLA_VXLAN_RSC, + IFLA_VXLAN_L2MISS, + IFLA_VXLAN_L3MISS, + IFLA_VXLAN_PORT, /* destination port */ + IFLA_VXLAN_GROUP6, + IFLA_VXLAN_LOCAL6, + IFLA_VXLAN_UDP_CSUM, + IFLA_VXLAN_UDP_ZERO_CSUM6_TX, + IFLA_VXLAN_UDP_ZERO_CSUM6_RX, + IFLA_VXLAN_REMCSUM_TX, + IFLA_VXLAN_REMCSUM_RX, + IFLA_VXLAN_GBP, + IFLA_VXLAN_REMCSUM_NOPARTIAL, + IFLA_VXLAN_COLLECT_METADATA, + IFLA_VXLAN_LABEL, + IFLA_VXLAN_GPE, + IFLA_VXLAN_TTL_INHERIT, + IFLA_VXLAN_DF, + IFLA_VXLAN_VNIFILTER, /* only applicable with COLLECT_METADATA mode */ + IFLA_VXLAN_LOCALBYPASS, + IFLA_VXLAN_LABEL_POLICY, /* IPv6 flow label policy; ifla_vxlan_label_policy */ + __IFLA_VXLAN_MAX +}; +#define IFLA_VXLAN_MAX (__IFLA_VXLAN_MAX - 1) + +struct ifla_vxlan_port_range { + __be16 low; + __be16 high; +}; + +enum ifla_vxlan_df { + VXLAN_DF_UNSET = 0, + VXLAN_DF_SET, + VXLAN_DF_INHERIT, + __VXLAN_DF_END, + VXLAN_DF_MAX = __VXLAN_DF_END - 1, +}; + +enum ifla_vxlan_label_policy { + VXLAN_LABEL_FIXED = 0, + VXLAN_LABEL_INHERIT = 1, + __VXLAN_LABEL_END, + VXLAN_LABEL_MAX = __VXLAN_LABEL_END - 1, +}; + +/* GENEVE section */ +enum { + IFLA_GENEVE_UNSPEC, + IFLA_GENEVE_ID, + IFLA_GENEVE_REMOTE, + IFLA_GENEVE_TTL, + IFLA_GENEVE_TOS, + IFLA_GENEVE_PORT, /* destination port */ + IFLA_GENEVE_COLLECT_METADATA, + IFLA_GENEVE_REMOTE6, + IFLA_GENEVE_UDP_CSUM, + IFLA_GENEVE_UDP_ZERO_CSUM6_TX, + IFLA_GENEVE_UDP_ZERO_CSUM6_RX, + IFLA_GENEVE_LABEL, + IFLA_GENEVE_TTL_INHERIT, + IFLA_GENEVE_DF, + IFLA_GENEVE_INNER_PROTO_INHERIT, + __IFLA_GENEVE_MAX +}; +#define IFLA_GENEVE_MAX (__IFLA_GENEVE_MAX - 1) + +enum ifla_geneve_df { + GENEVE_DF_UNSET = 0, + GENEVE_DF_SET, + GENEVE_DF_INHERIT, + __GENEVE_DF_END, + GENEVE_DF_MAX = __GENEVE_DF_END - 1, +}; + +/* Bareudp section */ +enum { + IFLA_BAREUDP_UNSPEC, + IFLA_BAREUDP_PORT, + IFLA_BAREUDP_ETHERTYPE, + IFLA_BAREUDP_SRCPORT_MIN, + IFLA_BAREUDP_MULTIPROTO_MODE, + __IFLA_BAREUDP_MAX +}; + +#define IFLA_BAREUDP_MAX (__IFLA_BAREUDP_MAX - 1) + +/* PPP section */ +enum { + IFLA_PPP_UNSPEC, + IFLA_PPP_DEV_FD, + __IFLA_PPP_MAX +}; +#define IFLA_PPP_MAX (__IFLA_PPP_MAX - 1) + +/* GTP section */ + +enum ifla_gtp_role { + GTP_ROLE_GGSN = 0, + GTP_ROLE_SGSN, +}; + +enum { + IFLA_GTP_UNSPEC, + IFLA_GTP_FD0, + IFLA_GTP_FD1, + IFLA_GTP_PDP_HASHSIZE, + IFLA_GTP_ROLE, + IFLA_GTP_CREATE_SOCKETS, + IFLA_GTP_RESTART_COUNT, + IFLA_GTP_LOCAL, + IFLA_GTP_LOCAL6, + __IFLA_GTP_MAX, +}; +#define IFLA_GTP_MAX (__IFLA_GTP_MAX - 1) + +/* Bonding section */ + +enum { + IFLA_BOND_UNSPEC, + IFLA_BOND_MODE, + IFLA_BOND_ACTIVE_SLAVE, + IFLA_BOND_MIIMON, + IFLA_BOND_UPDELAY, + IFLA_BOND_DOWNDELAY, + IFLA_BOND_USE_CARRIER, + IFLA_BOND_ARP_INTERVAL, + IFLA_BOND_ARP_IP_TARGET, + IFLA_BOND_ARP_VALIDATE, + IFLA_BOND_ARP_ALL_TARGETS, + IFLA_BOND_PRIMARY, + IFLA_BOND_PRIMARY_RESELECT, + IFLA_BOND_FAIL_OVER_MAC, + IFLA_BOND_XMIT_HASH_POLICY, + IFLA_BOND_RESEND_IGMP, + IFLA_BOND_NUM_PEER_NOTIF, + IFLA_BOND_ALL_SLAVES_ACTIVE, + IFLA_BOND_MIN_LINKS, + IFLA_BOND_LP_INTERVAL, + IFLA_BOND_PACKETS_PER_SLAVE, + IFLA_BOND_AD_LACP_RATE, + IFLA_BOND_AD_SELECT, + IFLA_BOND_AD_INFO, + IFLA_BOND_AD_ACTOR_SYS_PRIO, + IFLA_BOND_AD_USER_PORT_KEY, + IFLA_BOND_AD_ACTOR_SYSTEM, + IFLA_BOND_TLB_DYNAMIC_LB, + IFLA_BOND_PEER_NOTIF_DELAY, + IFLA_BOND_AD_LACP_ACTIVE, + IFLA_BOND_MISSED_MAX, + IFLA_BOND_NS_IP6_TARGET, + IFLA_BOND_COUPLED_CONTROL, + __IFLA_BOND_MAX, +}; + +#define IFLA_BOND_MAX (__IFLA_BOND_MAX - 1) + +enum { + IFLA_BOND_AD_INFO_UNSPEC, + IFLA_BOND_AD_INFO_AGGREGATOR, + IFLA_BOND_AD_INFO_NUM_PORTS, + IFLA_BOND_AD_INFO_ACTOR_KEY, + IFLA_BOND_AD_INFO_PARTNER_KEY, + IFLA_BOND_AD_INFO_PARTNER_MAC, + __IFLA_BOND_AD_INFO_MAX, +}; + +#define IFLA_BOND_AD_INFO_MAX (__IFLA_BOND_AD_INFO_MAX - 1) + +enum { + IFLA_BOND_SLAVE_UNSPEC, + IFLA_BOND_SLAVE_STATE, + IFLA_BOND_SLAVE_MII_STATUS, + IFLA_BOND_SLAVE_LINK_FAILURE_COUNT, + IFLA_BOND_SLAVE_PERM_HWADDR, + IFLA_BOND_SLAVE_QUEUE_ID, + IFLA_BOND_SLAVE_AD_AGGREGATOR_ID, + IFLA_BOND_SLAVE_AD_ACTOR_OPER_PORT_STATE, + IFLA_BOND_SLAVE_AD_PARTNER_OPER_PORT_STATE, + IFLA_BOND_SLAVE_PRIO, + __IFLA_BOND_SLAVE_MAX, +}; + +#define IFLA_BOND_SLAVE_MAX (__IFLA_BOND_SLAVE_MAX - 1) + +/* SR-IOV virtual function management section */ + +enum { + IFLA_VF_INFO_UNSPEC, + IFLA_VF_INFO, + __IFLA_VF_INFO_MAX, +}; + +#define IFLA_VF_INFO_MAX (__IFLA_VF_INFO_MAX - 1) + +enum { + IFLA_VF_UNSPEC, + IFLA_VF_MAC, /* Hardware queue specific attributes */ + IFLA_VF_VLAN, /* VLAN ID and QoS */ + IFLA_VF_TX_RATE, /* Max TX Bandwidth Allocation */ + IFLA_VF_SPOOFCHK, /* Spoof Checking on/off switch */ + IFLA_VF_LINK_STATE, /* link state enable/disable/auto switch */ + IFLA_VF_RATE, /* Min and Max TX Bandwidth Allocation */ + IFLA_VF_RSS_QUERY_EN, /* RSS Redirection Table and Hash Key query + * on/off switch + */ + IFLA_VF_STATS, /* network device statistics */ + IFLA_VF_TRUST, /* Trust VF */ + IFLA_VF_IB_NODE_GUID, /* VF Infiniband node GUID */ + IFLA_VF_IB_PORT_GUID, /* VF Infiniband port GUID */ + IFLA_VF_VLAN_LIST, /* nested list of vlans, option for QinQ */ + IFLA_VF_BROADCAST, /* VF broadcast */ + __IFLA_VF_MAX, +}; + +#define IFLA_VF_MAX (__IFLA_VF_MAX - 1) + +struct ifla_vf_mac { + __u32 vf; + __u8 mac[32]; /* MAX_ADDR_LEN */ +}; + +struct ifla_vf_broadcast { + __u8 broadcast[32]; +}; + +struct ifla_vf_vlan { + __u32 vf; + __u32 vlan; /* 0 - 4095, 0 disables VLAN filter */ + __u32 qos; +}; + +enum { + IFLA_VF_VLAN_INFO_UNSPEC, + IFLA_VF_VLAN_INFO, /* VLAN ID, QoS and VLAN protocol */ + __IFLA_VF_VLAN_INFO_MAX, +}; + +#define IFLA_VF_VLAN_INFO_MAX (__IFLA_VF_VLAN_INFO_MAX - 1) +#define MAX_VLAN_LIST_LEN 1 + +struct ifla_vf_vlan_info { + __u32 vf; + __u32 vlan; /* 0 - 4095, 0 disables VLAN filter */ + __u32 qos; + __be16 vlan_proto; /* VLAN protocol either 802.1Q or 802.1ad */ +}; + +struct ifla_vf_tx_rate { + __u32 vf; + __u32 rate; /* Max TX bandwidth in Mbps, 0 disables throttling */ +}; + +struct ifla_vf_rate { + __u32 vf; + __u32 min_tx_rate; /* Min Bandwidth in Mbps */ + __u32 max_tx_rate; /* Max Bandwidth in Mbps */ +}; + +struct ifla_vf_spoofchk { + __u32 vf; + __u32 setting; +}; + +struct ifla_vf_guid { + __u32 vf; + __u64 guid; +}; + +enum { + IFLA_VF_LINK_STATE_AUTO, /* link state of the uplink */ + IFLA_VF_LINK_STATE_ENABLE, /* link always up */ + IFLA_VF_LINK_STATE_DISABLE, /* link always down */ + __IFLA_VF_LINK_STATE_MAX, +}; + +struct ifla_vf_link_state { + __u32 vf; + __u32 link_state; +}; + +struct ifla_vf_rss_query_en { + __u32 vf; + __u32 setting; +}; + +enum { + IFLA_VF_STATS_RX_PACKETS, + IFLA_VF_STATS_TX_PACKETS, + IFLA_VF_STATS_RX_BYTES, + IFLA_VF_STATS_TX_BYTES, + IFLA_VF_STATS_BROADCAST, + IFLA_VF_STATS_MULTICAST, + IFLA_VF_STATS_PAD, + IFLA_VF_STATS_RX_DROPPED, + IFLA_VF_STATS_TX_DROPPED, + __IFLA_VF_STATS_MAX, +}; + +#define IFLA_VF_STATS_MAX (__IFLA_VF_STATS_MAX - 1) + +struct ifla_vf_trust { + __u32 vf; + __u32 setting; +}; + +/* VF ports management section + * + * Nested layout of set/get msg is: + * + * [IFLA_NUM_VF] + * [IFLA_VF_PORTS] + * [IFLA_VF_PORT] + * [IFLA_PORT_*], ... + * [IFLA_VF_PORT] + * [IFLA_PORT_*], ... + * ... + * [IFLA_PORT_SELF] + * [IFLA_PORT_*], ... + */ + +enum { + IFLA_VF_PORT_UNSPEC, + IFLA_VF_PORT, /* nest */ + __IFLA_VF_PORT_MAX, +}; + +#define IFLA_VF_PORT_MAX (__IFLA_VF_PORT_MAX - 1) + +enum { + IFLA_PORT_UNSPEC, + IFLA_PORT_VF, /* __u32 */ + IFLA_PORT_PROFILE, /* string */ + IFLA_PORT_VSI_TYPE, /* 802.1Qbg (pre-)standard VDP */ + IFLA_PORT_INSTANCE_UUID, /* binary UUID */ + IFLA_PORT_HOST_UUID, /* binary UUID */ + IFLA_PORT_REQUEST, /* __u8 */ + IFLA_PORT_RESPONSE, /* __u16, output only */ + __IFLA_PORT_MAX, +}; + +#define IFLA_PORT_MAX (__IFLA_PORT_MAX - 1) + +#define PORT_PROFILE_MAX 40 +#define PORT_UUID_MAX 16 +#define PORT_SELF_VF -1 + +enum { + PORT_REQUEST_PREASSOCIATE = 0, + PORT_REQUEST_PREASSOCIATE_RR, + PORT_REQUEST_ASSOCIATE, + PORT_REQUEST_DISASSOCIATE, +}; + +enum { + PORT_VDP_RESPONSE_SUCCESS = 0, + PORT_VDP_RESPONSE_INVALID_FORMAT, + PORT_VDP_RESPONSE_INSUFFICIENT_RESOURCES, + PORT_VDP_RESPONSE_UNUSED_VTID, + PORT_VDP_RESPONSE_VTID_VIOLATION, + PORT_VDP_RESPONSE_VTID_VERSION_VIOALTION, + PORT_VDP_RESPONSE_OUT_OF_SYNC, + /* 0x08-0xFF reserved for future VDP use */ + PORT_PROFILE_RESPONSE_SUCCESS = 0x100, + PORT_PROFILE_RESPONSE_INPROGRESS, + PORT_PROFILE_RESPONSE_INVALID, + PORT_PROFILE_RESPONSE_BADSTATE, + PORT_PROFILE_RESPONSE_INSUFFICIENT_RESOURCES, + PORT_PROFILE_RESPONSE_ERROR, +}; + +struct ifla_port_vsi { + __u8 vsi_mgr_id; + __u8 vsi_type_id[3]; + __u8 vsi_type_version; + __u8 pad[3]; +}; + + +/* IPoIB section */ + +enum { + IFLA_IPOIB_UNSPEC, + IFLA_IPOIB_PKEY, + IFLA_IPOIB_MODE, + IFLA_IPOIB_UMCAST, + __IFLA_IPOIB_MAX +}; + +enum { + IPOIB_MODE_DATAGRAM = 0, /* using unreliable datagram QPs */ + IPOIB_MODE_CONNECTED = 1, /* using connected QPs */ +}; + +#define IFLA_IPOIB_MAX (__IFLA_IPOIB_MAX - 1) + + +/* HSR/PRP section, both uses same interface */ + +/* Different redundancy protocols for hsr device */ +enum { + HSR_PROTOCOL_HSR, + HSR_PROTOCOL_PRP, + HSR_PROTOCOL_MAX, +}; + +enum { + IFLA_HSR_UNSPEC, + IFLA_HSR_SLAVE1, + IFLA_HSR_SLAVE2, + IFLA_HSR_MULTICAST_SPEC, /* Last byte of supervision addr */ + IFLA_HSR_SUPERVISION_ADDR, /* Supervision frame multicast addr */ + IFLA_HSR_SEQ_NR, + IFLA_HSR_VERSION, /* HSR version */ + IFLA_HSR_PROTOCOL, /* Indicate different protocol than + * HSR. For example PRP. + */ + IFLA_HSR_INTERLINK, /* HSR interlink network device */ + __IFLA_HSR_MAX, +}; + +#define IFLA_HSR_MAX (__IFLA_HSR_MAX - 1) + +/* STATS section */ + +struct if_stats_msg { + __u8 family; + __u8 pad1; + __u16 pad2; + __u32 ifindex; + __u32 filter_mask; +}; + +/* A stats attribute can be netdev specific or a global stat. + * For netdev stats, lets use the prefix IFLA_STATS_LINK_* + */ +enum { + IFLA_STATS_UNSPEC, /* also used as 64bit pad attribute */ + IFLA_STATS_LINK_64, + IFLA_STATS_LINK_XSTATS, + IFLA_STATS_LINK_XSTATS_SLAVE, + IFLA_STATS_LINK_OFFLOAD_XSTATS, + IFLA_STATS_AF_SPEC, + __IFLA_STATS_MAX, +}; + +#define IFLA_STATS_MAX (__IFLA_STATS_MAX - 1) + +#define IFLA_STATS_FILTER_BIT(ATTR) (1 << (ATTR - 1)) + +enum { + IFLA_STATS_GETSET_UNSPEC, + IFLA_STATS_GET_FILTERS, /* Nest of IFLA_STATS_LINK_xxx, each a u32 with + * a filter mask for the corresponding group. + */ + IFLA_STATS_SET_OFFLOAD_XSTATS_L3_STATS, /* 0 or 1 as u8 */ + __IFLA_STATS_GETSET_MAX, +}; + +#define IFLA_STATS_GETSET_MAX (__IFLA_STATS_GETSET_MAX - 1) + +/* These are embedded into IFLA_STATS_LINK_XSTATS: + * [IFLA_STATS_LINK_XSTATS] + * -> [LINK_XSTATS_TYPE_xxx] + * -> [rtnl link type specific attributes] + */ +enum { + LINK_XSTATS_TYPE_UNSPEC, + LINK_XSTATS_TYPE_BRIDGE, + LINK_XSTATS_TYPE_BOND, + __LINK_XSTATS_TYPE_MAX +}; +#define LINK_XSTATS_TYPE_MAX (__LINK_XSTATS_TYPE_MAX - 1) + +/* These are stats embedded into IFLA_STATS_LINK_OFFLOAD_XSTATS */ +enum { + IFLA_OFFLOAD_XSTATS_UNSPEC, + IFLA_OFFLOAD_XSTATS_CPU_HIT, /* struct rtnl_link_stats64 */ + IFLA_OFFLOAD_XSTATS_HW_S_INFO, /* HW stats info. A nest */ + IFLA_OFFLOAD_XSTATS_L3_STATS, /* struct rtnl_hw_stats64 */ + __IFLA_OFFLOAD_XSTATS_MAX +}; +#define IFLA_OFFLOAD_XSTATS_MAX (__IFLA_OFFLOAD_XSTATS_MAX - 1) + +enum { + IFLA_OFFLOAD_XSTATS_HW_S_INFO_UNSPEC, + IFLA_OFFLOAD_XSTATS_HW_S_INFO_REQUEST, /* u8 */ + IFLA_OFFLOAD_XSTATS_HW_S_INFO_USED, /* u8 */ + __IFLA_OFFLOAD_XSTATS_HW_S_INFO_MAX, +}; +#define IFLA_OFFLOAD_XSTATS_HW_S_INFO_MAX \ + (__IFLA_OFFLOAD_XSTATS_HW_S_INFO_MAX - 1) + +/* XDP section */ + +#define XDP_FLAGS_UPDATE_IF_NOEXIST (1U << 0) +#define XDP_FLAGS_SKB_MODE (1U << 1) +#define XDP_FLAGS_DRV_MODE (1U << 2) +#define XDP_FLAGS_HW_MODE (1U << 3) +#define XDP_FLAGS_REPLACE (1U << 4) +#define XDP_FLAGS_MODES (XDP_FLAGS_SKB_MODE | \ + XDP_FLAGS_DRV_MODE | \ + XDP_FLAGS_HW_MODE) +#define XDP_FLAGS_MASK (XDP_FLAGS_UPDATE_IF_NOEXIST | \ + XDP_FLAGS_MODES | XDP_FLAGS_REPLACE) + +/* These are stored into IFLA_XDP_ATTACHED on dump. */ +enum { + XDP_ATTACHED_NONE = 0, + XDP_ATTACHED_DRV, + XDP_ATTACHED_SKB, + XDP_ATTACHED_HW, + XDP_ATTACHED_MULTI, +}; + +enum { + IFLA_XDP_UNSPEC, + IFLA_XDP_FD, + IFLA_XDP_ATTACHED, + IFLA_XDP_FLAGS, + IFLA_XDP_PROG_ID, + IFLA_XDP_DRV_PROG_ID, + IFLA_XDP_SKB_PROG_ID, + IFLA_XDP_HW_PROG_ID, + IFLA_XDP_EXPECTED_FD, + __IFLA_XDP_MAX, +}; + +#define IFLA_XDP_MAX (__IFLA_XDP_MAX - 1) + +enum { + IFLA_EVENT_NONE, + IFLA_EVENT_REBOOT, /* internal reset / reboot */ + IFLA_EVENT_FEATURES, /* change in offload features */ + IFLA_EVENT_BONDING_FAILOVER, /* change in active slave */ + IFLA_EVENT_NOTIFY_PEERS, /* re-sent grat. arp/ndisc */ + IFLA_EVENT_IGMP_RESEND, /* re-sent IGMP JOIN */ + IFLA_EVENT_BONDING_OPTIONS, /* change in bonding options */ +}; + +/* tun section */ + +enum { + IFLA_TUN_UNSPEC, + IFLA_TUN_OWNER, + IFLA_TUN_GROUP, + IFLA_TUN_TYPE, + IFLA_TUN_PI, + IFLA_TUN_VNET_HDR, + IFLA_TUN_PERSIST, + IFLA_TUN_MULTI_QUEUE, + IFLA_TUN_NUM_QUEUES, + IFLA_TUN_NUM_DISABLED_QUEUES, + __IFLA_TUN_MAX, +}; + +#define IFLA_TUN_MAX (__IFLA_TUN_MAX - 1) + +/* rmnet section */ + +#define RMNET_FLAGS_INGRESS_DEAGGREGATION (1U << 0) +#define RMNET_FLAGS_INGRESS_MAP_COMMANDS (1U << 1) +#define RMNET_FLAGS_INGRESS_MAP_CKSUMV4 (1U << 2) +#define RMNET_FLAGS_EGRESS_MAP_CKSUMV4 (1U << 3) +#define RMNET_FLAGS_INGRESS_MAP_CKSUMV5 (1U << 4) +#define RMNET_FLAGS_EGRESS_MAP_CKSUMV5 (1U << 5) + +enum { + IFLA_RMNET_UNSPEC, + IFLA_RMNET_MUX_ID, + IFLA_RMNET_FLAGS, + __IFLA_RMNET_MAX, +}; + +#define IFLA_RMNET_MAX (__IFLA_RMNET_MAX - 1) + +struct ifla_rmnet_flags { + __u32 flags; + __u32 mask; +}; + +/* MCTP section */ + +enum { + IFLA_MCTP_UNSPEC, + IFLA_MCTP_NET, + __IFLA_MCTP_MAX, +}; + +#define IFLA_MCTP_MAX (__IFLA_MCTP_MAX - 1) + +/* DSA section */ + +enum { + IFLA_DSA_UNSPEC, + IFLA_DSA_CONDUIT, + /* Deprecated, use IFLA_DSA_CONDUIT instead */ + IFLA_DSA_MASTER = IFLA_DSA_CONDUIT, + __IFLA_DSA_MAX, +}; + +#define IFLA_DSA_MAX (__IFLA_DSA_MAX - 1) + +#endif /* _UAPI_LINUX_IF_LINK_H */ diff --git a/tools/include/uapi/linux/if_tun.h b/tools/include/uapi/linux/if_tun.h new file mode 100644 index 000000000000..2ec07de1d73b --- /dev/null +++ b/tools/include/uapi/linux/if_tun.h @@ -0,0 +1,114 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * Universal TUN/TAP device driver. + * Copyright (C) 1999-2000 Maxim Krasnyansky <max_mk@yahoo.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _UAPI__IF_TUN_H +#define _UAPI__IF_TUN_H + +#include <linux/types.h> +#include <linux/if_ether.h> +#include <linux/filter.h> + +/* Read queue size */ +#define TUN_READQ_SIZE 500 +/* TUN device type flags: deprecated. Use IFF_TUN/IFF_TAP instead. */ +#define TUN_TUN_DEV IFF_TUN +#define TUN_TAP_DEV IFF_TAP +#define TUN_TYPE_MASK 0x000f + +/* Ioctl defines */ +#define TUNSETNOCSUM _IOW('T', 200, int) +#define TUNSETDEBUG _IOW('T', 201, int) +#define TUNSETIFF _IOW('T', 202, int) +#define TUNSETPERSIST _IOW('T', 203, int) +#define TUNSETOWNER _IOW('T', 204, int) +#define TUNSETLINK _IOW('T', 205, int) +#define TUNSETGROUP _IOW('T', 206, int) +#define TUNGETFEATURES _IOR('T', 207, unsigned int) +#define TUNSETOFFLOAD _IOW('T', 208, unsigned int) +#define TUNSETTXFILTER _IOW('T', 209, unsigned int) +#define TUNGETIFF _IOR('T', 210, unsigned int) +#define TUNGETSNDBUF _IOR('T', 211, int) +#define TUNSETSNDBUF _IOW('T', 212, int) +#define TUNATTACHFILTER _IOW('T', 213, struct sock_fprog) +#define TUNDETACHFILTER _IOW('T', 214, struct sock_fprog) +#define TUNGETVNETHDRSZ _IOR('T', 215, int) +#define TUNSETVNETHDRSZ _IOW('T', 216, int) +#define TUNSETQUEUE _IOW('T', 217, int) +#define TUNSETIFINDEX _IOW('T', 218, unsigned int) +#define TUNGETFILTER _IOR('T', 219, struct sock_fprog) +#define TUNSETVNETLE _IOW('T', 220, int) +#define TUNGETVNETLE _IOR('T', 221, int) +/* The TUNSETVNETBE and TUNGETVNETBE ioctls are for cross-endian support on + * little-endian hosts. Not all kernel configurations support them, but all + * configurations that support SET also support GET. + */ +#define TUNSETVNETBE _IOW('T', 222, int) +#define TUNGETVNETBE _IOR('T', 223, int) +#define TUNSETSTEERINGEBPF _IOR('T', 224, int) +#define TUNSETFILTEREBPF _IOR('T', 225, int) +#define TUNSETCARRIER _IOW('T', 226, int) +#define TUNGETDEVNETNS _IO('T', 227) + +/* TUNSETIFF ifr flags */ +#define IFF_TUN 0x0001 +#define IFF_TAP 0x0002 +#define IFF_NAPI 0x0010 +#define IFF_NAPI_FRAGS 0x0020 +#define IFF_NO_PI 0x1000 +/* This flag has no real effect */ +#define IFF_ONE_QUEUE 0x2000 +#define IFF_VNET_HDR 0x4000 +#define IFF_TUN_EXCL 0x8000 +#define IFF_MULTI_QUEUE 0x0100 +#define IFF_ATTACH_QUEUE 0x0200 +#define IFF_DETACH_QUEUE 0x0400 +/* read-only flag */ +#define IFF_PERSIST 0x0800 +#define IFF_NOFILTER 0x1000 + +/* Socket options */ +#define TUN_TX_TIMESTAMP 1 + +/* Features for GSO (TUNSETOFFLOAD). */ +#define TUN_F_CSUM 0x01 /* You can hand me unchecksummed packets. */ +#define TUN_F_TSO4 0x02 /* I can handle TSO for IPv4 packets */ +#define TUN_F_TSO6 0x04 /* I can handle TSO for IPv6 packets */ +#define TUN_F_TSO_ECN 0x08 /* I can handle TSO with ECN bits. */ +#define TUN_F_UFO 0x10 /* I can handle UFO packets */ + +/* Protocol info prepended to the packets (when IFF_NO_PI is not set) */ +#define TUN_PKT_STRIP 0x0001 +struct tun_pi { + __u16 flags; + __be16 proto; +}; + +/* + * Filter spec (used for SETXXFILTER ioctls) + * This stuff is applicable only to the TAP (Ethernet) devices. + * If the count is zero the filter is disabled and the driver accepts + * all packets (promisc mode). + * If the filter is enabled in order to accept broadcast packets + * broadcast addr must be explicitly included in the addr list. + */ +#define TUN_FLT_ALLMULTI 0x0001 /* Accept all multicast packets */ +struct tun_filter { + __u16 flags; /* TUN_FLT_ flags see above */ + __u16 count; /* Number of addresses */ + __u8 addr[][ETH_ALEN]; +}; + +#endif /* _UAPI__IF_TUN_H */ diff --git a/tools/include/uapi/linux/if_xdp.h b/tools/include/uapi/linux/if_xdp.h new file mode 100644 index 000000000000..23a062781468 --- /dev/null +++ b/tools/include/uapi/linux/if_xdp.h @@ -0,0 +1,184 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * if_xdp: XDP socket user-space interface + * Copyright(c) 2018 Intel Corporation. + * + * Author(s): Björn Töpel <bjorn.topel@intel.com> + * Magnus Karlsson <magnus.karlsson@intel.com> + */ + +#ifndef _UAPI_LINUX_IF_XDP_H +#define _UAPI_LINUX_IF_XDP_H + +#include <linux/types.h> + +/* Options for the sxdp_flags field */ +#define XDP_SHARED_UMEM (1 << 0) +#define XDP_COPY (1 << 1) /* Force copy-mode */ +#define XDP_ZEROCOPY (1 << 2) /* Force zero-copy mode */ +/* If this option is set, the driver might go sleep and in that case + * the XDP_RING_NEED_WAKEUP flag in the fill and/or Tx rings will be + * set. If it is set, the application need to explicitly wake up the + * driver with a poll() (Rx and Tx) or sendto() (Tx only). If you are + * running the driver and the application on the same core, you should + * use this option so that the kernel will yield to the user space + * application. + */ +#define XDP_USE_NEED_WAKEUP (1 << 3) +/* By setting this option, userspace application indicates that it can + * handle multiple descriptors per packet thus enabling AF_XDP to split + * multi-buffer XDP frames into multiple Rx descriptors. Without this set + * such frames will be dropped. + */ +#define XDP_USE_SG (1 << 4) + +/* Flags for xsk_umem_config flags */ +#define XDP_UMEM_UNALIGNED_CHUNK_FLAG (1 << 0) + +/* Force checksum calculation in software. Can be used for testing or + * working around potential HW issues. This option causes performance + * degradation and only works in XDP_COPY mode. + */ +#define XDP_UMEM_TX_SW_CSUM (1 << 1) + +/* Request to reserve tx_metadata_len bytes of per-chunk metadata. + */ +#define XDP_UMEM_TX_METADATA_LEN (1 << 2) + +struct sockaddr_xdp { + __u16 sxdp_family; + __u16 sxdp_flags; + __u32 sxdp_ifindex; + __u32 sxdp_queue_id; + __u32 sxdp_shared_umem_fd; +}; + +/* XDP_RING flags */ +#define XDP_RING_NEED_WAKEUP (1 << 0) + +struct xdp_ring_offset { + __u64 producer; + __u64 consumer; + __u64 desc; + __u64 flags; +}; + +struct xdp_mmap_offsets { + struct xdp_ring_offset rx; + struct xdp_ring_offset tx; + struct xdp_ring_offset fr; /* Fill */ + struct xdp_ring_offset cr; /* Completion */ +}; + +/* XDP socket options */ +#define XDP_MMAP_OFFSETS 1 +#define XDP_RX_RING 2 +#define XDP_TX_RING 3 +#define XDP_UMEM_REG 4 +#define XDP_UMEM_FILL_RING 5 +#define XDP_UMEM_COMPLETION_RING 6 +#define XDP_STATISTICS 7 +#define XDP_OPTIONS 8 +#define XDP_MAX_TX_SKB_BUDGET 9 + +struct xdp_umem_reg { + __u64 addr; /* Start of packet data area */ + __u64 len; /* Length of packet data area */ + __u32 chunk_size; + __u32 headroom; + __u32 flags; + __u32 tx_metadata_len; +}; + +struct xdp_statistics { + __u64 rx_dropped; /* Dropped for other reasons */ + __u64 rx_invalid_descs; /* Dropped due to invalid descriptor */ + __u64 tx_invalid_descs; /* Dropped due to invalid descriptor */ + __u64 rx_ring_full; /* Dropped due to rx ring being full */ + __u64 rx_fill_ring_empty_descs; /* Failed to retrieve item from fill ring */ + __u64 tx_ring_empty_descs; /* Failed to retrieve item from tx ring */ +}; + +struct xdp_options { + __u32 flags; +}; + +/* Flags for the flags field of struct xdp_options */ +#define XDP_OPTIONS_ZEROCOPY (1 << 0) + +/* Pgoff for mmaping the rings */ +#define XDP_PGOFF_RX_RING 0 +#define XDP_PGOFF_TX_RING 0x80000000 +#define XDP_UMEM_PGOFF_FILL_RING 0x100000000ULL +#define XDP_UMEM_PGOFF_COMPLETION_RING 0x180000000ULL + +/* Masks for unaligned chunks mode */ +#define XSK_UNALIGNED_BUF_OFFSET_SHIFT 48 +#define XSK_UNALIGNED_BUF_ADDR_MASK \ + ((1ULL << XSK_UNALIGNED_BUF_OFFSET_SHIFT) - 1) + +/* Request transmit timestamp. Upon completion, put it into tx_timestamp + * field of struct xsk_tx_metadata. + */ +#define XDP_TXMD_FLAGS_TIMESTAMP (1 << 0) + +/* Request transmit checksum offload. Checksum start position and offset + * are communicated via csum_start and csum_offset fields of struct + * xsk_tx_metadata. + */ +#define XDP_TXMD_FLAGS_CHECKSUM (1 << 1) + +/* Request launch time hardware offload. The device will schedule the packet for + * transmission at a pre-determined time called launch time. The value of + * launch time is communicated via launch_time field of struct xsk_tx_metadata. + */ +#define XDP_TXMD_FLAGS_LAUNCH_TIME (1 << 2) + +/* AF_XDP offloads request. 'request' union member is consumed by the driver + * when the packet is being transmitted. 'completion' union member is + * filled by the driver when the transmit completion arrives. + */ +struct xsk_tx_metadata { + __u64 flags; + + union { + struct { + /* XDP_TXMD_FLAGS_CHECKSUM */ + + /* Offset from desc->addr where checksumming should start. */ + __u16 csum_start; + /* Offset from csum_start where checksum should be stored. */ + __u16 csum_offset; + + /* XDP_TXMD_FLAGS_LAUNCH_TIME */ + /* Launch time in nanosecond against the PTP HW Clock */ + __u64 launch_time; + } request; + + struct { + /* XDP_TXMD_FLAGS_TIMESTAMP */ + __u64 tx_timestamp; + } completion; + }; +}; + +/* Rx/Tx descriptor */ +struct xdp_desc { + __u64 addr; + __u32 len; + __u32 options; +}; + +/* UMEM descriptor is __u64 */ + +/* Flag indicating that the packet continues with the buffer pointed out by the + * next frame in the ring. The end of the packet is signalled by setting this + * bit to zero. For single buffer packets, every descriptor has 'options' set + * to 0 and this maintains backward compatibility. + */ +#define XDP_PKT_CONTD (1 << 0) + +/* TX packet carries valid metadata. */ +#define XDP_TX_METADATA (1 << 1) + +#endif /* _UAPI_LINUX_IF_XDP_H */ diff --git a/tools/include/uapi/linux/in.h b/tools/include/uapi/linux/in.h new file mode 100644 index 000000000000..ced0fc3c3aa5 --- /dev/null +++ b/tools/include/uapi/linux/in.h @@ -0,0 +1,337 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * Definitions of the Internet Protocol. + * + * Version: @(#)in.h 1.0.1 04/21/93 + * + * Authors: Original taken from the GNU Project <netinet/in.h> file. + * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _UAPI_LINUX_IN_H +#define _UAPI_LINUX_IN_H + +#include <linux/types.h> +#include <linux/stddef.h> +#include <linux/libc-compat.h> +#include <linux/socket.h> + +#if __UAPI_DEF_IN_IPPROTO +/* Standard well-defined IP protocols. */ +enum { + IPPROTO_IP = 0, /* Dummy protocol for TCP */ +#define IPPROTO_IP IPPROTO_IP + IPPROTO_ICMP = 1, /* Internet Control Message Protocol */ +#define IPPROTO_ICMP IPPROTO_ICMP + IPPROTO_IGMP = 2, /* Internet Group Management Protocol */ +#define IPPROTO_IGMP IPPROTO_IGMP + IPPROTO_IPIP = 4, /* IPIP tunnels (older KA9Q tunnels use 94) */ +#define IPPROTO_IPIP IPPROTO_IPIP + IPPROTO_TCP = 6, /* Transmission Control Protocol */ +#define IPPROTO_TCP IPPROTO_TCP + IPPROTO_EGP = 8, /* Exterior Gateway Protocol */ +#define IPPROTO_EGP IPPROTO_EGP + IPPROTO_PUP = 12, /* PUP protocol */ +#define IPPROTO_PUP IPPROTO_PUP + IPPROTO_UDP = 17, /* User Datagram Protocol */ +#define IPPROTO_UDP IPPROTO_UDP + IPPROTO_IDP = 22, /* XNS IDP protocol */ +#define IPPROTO_IDP IPPROTO_IDP + IPPROTO_TP = 29, /* SO Transport Protocol Class 4 */ +#define IPPROTO_TP IPPROTO_TP + IPPROTO_DCCP = 33, /* Datagram Congestion Control Protocol */ +#define IPPROTO_DCCP IPPROTO_DCCP + IPPROTO_IPV6 = 41, /* IPv6-in-IPv4 tunnelling */ +#define IPPROTO_IPV6 IPPROTO_IPV6 + IPPROTO_RSVP = 46, /* RSVP Protocol */ +#define IPPROTO_RSVP IPPROTO_RSVP + IPPROTO_GRE = 47, /* Cisco GRE tunnels (rfc 1701,1702) */ +#define IPPROTO_GRE IPPROTO_GRE + IPPROTO_ESP = 50, /* Encapsulation Security Payload protocol */ +#define IPPROTO_ESP IPPROTO_ESP + IPPROTO_AH = 51, /* Authentication Header protocol */ +#define IPPROTO_AH IPPROTO_AH + IPPROTO_MTP = 92, /* Multicast Transport Protocol */ +#define IPPROTO_MTP IPPROTO_MTP + IPPROTO_BEETPH = 94, /* IP option pseudo header for BEET */ +#define IPPROTO_BEETPH IPPROTO_BEETPH + IPPROTO_ENCAP = 98, /* Encapsulation Header */ +#define IPPROTO_ENCAP IPPROTO_ENCAP + IPPROTO_PIM = 103, /* Protocol Independent Multicast */ +#define IPPROTO_PIM IPPROTO_PIM + IPPROTO_COMP = 108, /* Compression Header Protocol */ +#define IPPROTO_COMP IPPROTO_COMP + IPPROTO_L2TP = 115, /* Layer 2 Tunnelling Protocol */ +#define IPPROTO_L2TP IPPROTO_L2TP + IPPROTO_SCTP = 132, /* Stream Control Transport Protocol */ +#define IPPROTO_SCTP IPPROTO_SCTP + IPPROTO_UDPLITE = 136, /* UDP-Lite (RFC 3828) */ +#define IPPROTO_UDPLITE IPPROTO_UDPLITE + IPPROTO_MPLS = 137, /* MPLS in IP (RFC 4023) */ +#define IPPROTO_MPLS IPPROTO_MPLS + IPPROTO_ETHERNET = 143, /* Ethernet-within-IPv6 Encapsulation */ +#define IPPROTO_ETHERNET IPPROTO_ETHERNET + IPPROTO_AGGFRAG = 144, /* AGGFRAG in ESP (RFC 9347) */ +#define IPPROTO_AGGFRAG IPPROTO_AGGFRAG + IPPROTO_RAW = 255, /* Raw IP packets */ +#define IPPROTO_RAW IPPROTO_RAW + IPPROTO_SMC = 256, /* Shared Memory Communications */ +#define IPPROTO_SMC IPPROTO_SMC + IPPROTO_MPTCP = 262, /* Multipath TCP connection */ +#define IPPROTO_MPTCP IPPROTO_MPTCP + IPPROTO_MAX +}; +#endif + +#if __UAPI_DEF_IN_ADDR +/* Internet address. */ +struct in_addr { + __be32 s_addr; +}; +#endif + +#define IP_TOS 1 +#define IP_TTL 2 +#define IP_HDRINCL 3 +#define IP_OPTIONS 4 +#define IP_ROUTER_ALERT 5 +#define IP_RECVOPTS 6 +#define IP_RETOPTS 7 +#define IP_PKTINFO 8 +#define IP_PKTOPTIONS 9 +#define IP_MTU_DISCOVER 10 +#define IP_RECVERR 11 +#define IP_RECVTTL 12 +#define IP_RECVTOS 13 +#define IP_MTU 14 +#define IP_FREEBIND 15 +#define IP_IPSEC_POLICY 16 +#define IP_XFRM_POLICY 17 +#define IP_PASSSEC 18 +#define IP_TRANSPARENT 19 + +/* BSD compatibility */ +#define IP_RECVRETOPTS IP_RETOPTS + +/* TProxy original addresses */ +#define IP_ORIGDSTADDR 20 +#define IP_RECVORIGDSTADDR IP_ORIGDSTADDR + +#define IP_MINTTL 21 +#define IP_NODEFRAG 22 +#define IP_CHECKSUM 23 +#define IP_BIND_ADDRESS_NO_PORT 24 +#define IP_RECVFRAGSIZE 25 +#define IP_RECVERR_RFC4884 26 + +/* IP_MTU_DISCOVER values */ +#define IP_PMTUDISC_DONT 0 /* Never send DF frames */ +#define IP_PMTUDISC_WANT 1 /* Use per route hints */ +#define IP_PMTUDISC_DO 2 /* Always DF */ +#define IP_PMTUDISC_PROBE 3 /* Ignore dst pmtu */ +/* Always use interface mtu (ignores dst pmtu) but don't set DF flag. + * Also incoming ICMP frag_needed notifications will be ignored on + * this socket to prevent accepting spoofed ones. + */ +#define IP_PMTUDISC_INTERFACE 4 +/* weaker version of IP_PMTUDISC_INTERFACE, which allows packets to get + * fragmented if they exceed the interface mtu + */ +#define IP_PMTUDISC_OMIT 5 + +#define IP_MULTICAST_IF 32 +#define IP_MULTICAST_TTL 33 +#define IP_MULTICAST_LOOP 34 +#define IP_ADD_MEMBERSHIP 35 +#define IP_DROP_MEMBERSHIP 36 +#define IP_UNBLOCK_SOURCE 37 +#define IP_BLOCK_SOURCE 38 +#define IP_ADD_SOURCE_MEMBERSHIP 39 +#define IP_DROP_SOURCE_MEMBERSHIP 40 +#define IP_MSFILTER 41 +#define MCAST_JOIN_GROUP 42 +#define MCAST_BLOCK_SOURCE 43 +#define MCAST_UNBLOCK_SOURCE 44 +#define MCAST_LEAVE_GROUP 45 +#define MCAST_JOIN_SOURCE_GROUP 46 +#define MCAST_LEAVE_SOURCE_GROUP 47 +#define MCAST_MSFILTER 48 +#define IP_MULTICAST_ALL 49 +#define IP_UNICAST_IF 50 +#define IP_LOCAL_PORT_RANGE 51 +#define IP_PROTOCOL 52 + +#define MCAST_EXCLUDE 0 +#define MCAST_INCLUDE 1 + +/* These need to appear somewhere around here */ +#define IP_DEFAULT_MULTICAST_TTL 1 +#define IP_DEFAULT_MULTICAST_LOOP 1 + +/* Request struct for multicast socket ops */ + +#if __UAPI_DEF_IP_MREQ +struct ip_mreq { + struct in_addr imr_multiaddr; /* IP multicast address of group */ + struct in_addr imr_interface; /* local IP address of interface */ +}; + +struct ip_mreqn { + struct in_addr imr_multiaddr; /* IP multicast address of group */ + struct in_addr imr_address; /* local IP address of interface */ + int imr_ifindex; /* Interface index */ +}; + +struct ip_mreq_source { + __be32 imr_multiaddr; + __be32 imr_interface; + __be32 imr_sourceaddr; +}; + +struct ip_msfilter { + __be32 imsf_multiaddr; + __be32 imsf_interface; + __u32 imsf_fmode; + __u32 imsf_numsrc; + union { + __be32 imsf_slist[1]; + __DECLARE_FLEX_ARRAY(__be32, imsf_slist_flex); + }; +}; + +#define IP_MSFILTER_SIZE(numsrc) \ + (sizeof(struct ip_msfilter) - sizeof(__u32) \ + + (numsrc) * sizeof(__u32)) + +struct group_req { + __u32 gr_interface; /* interface index */ + struct __kernel_sockaddr_storage gr_group; /* group address */ +}; + +struct group_source_req { + __u32 gsr_interface; /* interface index */ + struct __kernel_sockaddr_storage gsr_group; /* group address */ + struct __kernel_sockaddr_storage gsr_source; /* source address */ +}; + +struct group_filter { + union { + struct { + __u32 gf_interface_aux; /* interface index */ + struct __kernel_sockaddr_storage gf_group_aux; /* multicast address */ + __u32 gf_fmode_aux; /* filter mode */ + __u32 gf_numsrc_aux; /* number of sources */ + struct __kernel_sockaddr_storage gf_slist[1]; /* interface index */ + }; + struct { + __u32 gf_interface; /* interface index */ + struct __kernel_sockaddr_storage gf_group; /* multicast address */ + __u32 gf_fmode; /* filter mode */ + __u32 gf_numsrc; /* number of sources */ + struct __kernel_sockaddr_storage gf_slist_flex[]; /* interface index */ + }; + }; +}; + +#define GROUP_FILTER_SIZE(numsrc) \ + (sizeof(struct group_filter) - sizeof(struct __kernel_sockaddr_storage) \ + + (numsrc) * sizeof(struct __kernel_sockaddr_storage)) +#endif + +#if __UAPI_DEF_IN_PKTINFO +struct in_pktinfo { + int ipi_ifindex; + struct in_addr ipi_spec_dst; + struct in_addr ipi_addr; +}; +#endif + +/* Structure describing an Internet (IP) socket address. */ +#if __UAPI_DEF_SOCKADDR_IN +#define __SOCK_SIZE__ 16 /* sizeof(struct sockaddr) */ +struct sockaddr_in { + __kernel_sa_family_t sin_family; /* Address family */ + __be16 sin_port; /* Port number */ + struct in_addr sin_addr; /* Internet address */ + + /* Pad to size of `struct sockaddr'. */ + unsigned char __pad[__SOCK_SIZE__ - sizeof(short int) - + sizeof(unsigned short int) - sizeof(struct in_addr)]; +}; +#define sin_zero __pad /* for BSD UNIX comp. -FvK */ +#endif + +#if __UAPI_DEF_IN_CLASS +/* + * Definitions of the bits in an Internet address integer. + * On subnets, host and network parts are found according + * to the subnet mask, not these masks. + */ +#define IN_CLASSA(a) ((((long int) (a)) & 0x80000000) == 0) +#define IN_CLASSA_NET 0xff000000 +#define IN_CLASSA_NSHIFT 24 +#define IN_CLASSA_HOST (0xffffffff & ~IN_CLASSA_NET) +#define IN_CLASSA_MAX 128 + +#define IN_CLASSB(a) ((((long int) (a)) & 0xc0000000) == 0x80000000) +#define IN_CLASSB_NET 0xffff0000 +#define IN_CLASSB_NSHIFT 16 +#define IN_CLASSB_HOST (0xffffffff & ~IN_CLASSB_NET) +#define IN_CLASSB_MAX 65536 + +#define IN_CLASSC(a) ((((long int) (a)) & 0xe0000000) == 0xc0000000) +#define IN_CLASSC_NET 0xffffff00 +#define IN_CLASSC_NSHIFT 8 +#define IN_CLASSC_HOST (0xffffffff & ~IN_CLASSC_NET) + +#define IN_CLASSD(a) ((((long int) (a)) & 0xf0000000) == 0xe0000000) +#define IN_MULTICAST(a) IN_CLASSD(a) +#define IN_MULTICAST_NET 0xe0000000 + +#define IN_BADCLASS(a) (((long int) (a) ) == (long int)0xffffffff) +#define IN_EXPERIMENTAL(a) IN_BADCLASS((a)) + +#define IN_CLASSE(a) ((((long int) (a)) & 0xf0000000) == 0xf0000000) +#define IN_CLASSE_NET 0xffffffff +#define IN_CLASSE_NSHIFT 0 + +/* Address to accept any incoming messages. */ +#define INADDR_ANY ((unsigned long int) 0x00000000) + +/* Address to send to all hosts. */ +#define INADDR_BROADCAST ((unsigned long int) 0xffffffff) + +/* Address indicating an error return. */ +#define INADDR_NONE ((unsigned long int) 0xffffffff) + +/* Dummy address for src of ICMP replies if no real address is set (RFC7600). */ +#define INADDR_DUMMY ((unsigned long int) 0xc0000008) + +/* Network number for local host loopback. */ +#define IN_LOOPBACKNET 127 + +/* Address to loopback in software to local host. */ +#define INADDR_LOOPBACK 0x7f000001 /* 127.0.0.1 */ +#define IN_LOOPBACK(a) ((((long int) (a)) & 0xff000000) == 0x7f000000) + +/* Defines for Multicast INADDR */ +#define INADDR_UNSPEC_GROUP 0xe0000000U /* 224.0.0.0 */ +#define INADDR_ALLHOSTS_GROUP 0xe0000001U /* 224.0.0.1 */ +#define INADDR_ALLRTRS_GROUP 0xe0000002U /* 224.0.0.2 */ +#define INADDR_ALLSNOOPERS_GROUP 0xe000006aU /* 224.0.0.106 */ +#define INADDR_MAX_LOCAL_GROUP 0xe00000ffU /* 224.0.0.255 */ +#endif + +/* <asm/byteorder.h> contains the htonl type stuff.. */ +#include <asm/byteorder.h> + + +#endif /* _UAPI_LINUX_IN_H */ diff --git a/tools/include/uapi/linux/io_uring.h b/tools/include/uapi/linux/io_uring.h new file mode 100644 index 000000000000..f1c16f817742 --- /dev/null +++ b/tools/include/uapi/linux/io_uring.h @@ -0,0 +1,757 @@ +/* SPDX-License-Identifier: (GPL-2.0 WITH Linux-syscall-note) OR MIT */ +/* + * Header file for the io_uring interface. + * + * Copyright (C) 2019 Jens Axboe + * Copyright (C) 2019 Christoph Hellwig + */ +#ifndef LINUX_IO_URING_H +#define LINUX_IO_URING_H + +#include <linux/fs.h> +#include <linux/types.h> +/* + * this file is shared with liburing and that has to autodetect + * if linux/time_types.h is available or not, it can + * define UAPI_LINUX_IO_URING_H_SKIP_LINUX_TIME_TYPES_H + * if linux/time_types.h is not available + */ +#ifndef UAPI_LINUX_IO_URING_H_SKIP_LINUX_TIME_TYPES_H +#include <linux/time_types.h> +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +/* + * IO submission data structure (Submission Queue Entry) + */ +struct io_uring_sqe { + __u8 opcode; /* type of operation for this sqe */ + __u8 flags; /* IOSQE_ flags */ + __u16 ioprio; /* ioprio for the request */ + __s32 fd; /* file descriptor to do IO on */ + union { + __u64 off; /* offset into file */ + __u64 addr2; + struct { + __u32 cmd_op; + __u32 __pad1; + }; + }; + union { + __u64 addr; /* pointer to buffer or iovecs */ + __u64 splice_off_in; + struct { + __u32 level; + __u32 optname; + }; + }; + __u32 len; /* buffer size or number of iovecs */ + union { + __kernel_rwf_t rw_flags; + __u32 fsync_flags; + __u16 poll_events; /* compatibility */ + __u32 poll32_events; /* word-reversed for BE */ + __u32 sync_range_flags; + __u32 msg_flags; + __u32 timeout_flags; + __u32 accept_flags; + __u32 cancel_flags; + __u32 open_flags; + __u32 statx_flags; + __u32 fadvise_advice; + __u32 splice_flags; + __u32 rename_flags; + __u32 unlink_flags; + __u32 hardlink_flags; + __u32 xattr_flags; + __u32 msg_ring_flags; + __u32 uring_cmd_flags; + __u32 waitid_flags; + __u32 futex_flags; + }; + __u64 user_data; /* data to be passed back at completion time */ + /* pack this to avoid bogus arm OABI complaints */ + union { + /* index into fixed buffers, if used */ + __u16 buf_index; + /* for grouped buffer selection */ + __u16 buf_group; + } __attribute__((packed)); + /* personality to use, if used */ + __u16 personality; + union { + __s32 splice_fd_in; + __u32 file_index; + __u32 optlen; + struct { + __u16 addr_len; + __u16 __pad3[1]; + }; + }; + union { + struct { + __u64 addr3; + __u64 __pad2[1]; + }; + __u64 optval; + /* + * If the ring is initialized with IORING_SETUP_SQE128, then + * this field is used for 80 bytes of arbitrary command data + */ + __u8 cmd[0]; + }; +}; + +/* + * If sqe->file_index is set to this for opcodes that instantiate a new + * direct descriptor (like openat/openat2/accept), then io_uring will allocate + * an available direct descriptor instead of having the application pass one + * in. The picked direct descriptor will be returned in cqe->res, or -ENFILE + * if the space is full. + */ +#define IORING_FILE_INDEX_ALLOC (~0U) + +enum { + IOSQE_FIXED_FILE_BIT, + IOSQE_IO_DRAIN_BIT, + IOSQE_IO_LINK_BIT, + IOSQE_IO_HARDLINK_BIT, + IOSQE_ASYNC_BIT, + IOSQE_BUFFER_SELECT_BIT, + IOSQE_CQE_SKIP_SUCCESS_BIT, +}; + +/* + * sqe->flags + */ +/* use fixed fileset */ +#define IOSQE_FIXED_FILE (1U << IOSQE_FIXED_FILE_BIT) +/* issue after inflight IO */ +#define IOSQE_IO_DRAIN (1U << IOSQE_IO_DRAIN_BIT) +/* links next sqe */ +#define IOSQE_IO_LINK (1U << IOSQE_IO_LINK_BIT) +/* like LINK, but stronger */ +#define IOSQE_IO_HARDLINK (1U << IOSQE_IO_HARDLINK_BIT) +/* always go async */ +#define IOSQE_ASYNC (1U << IOSQE_ASYNC_BIT) +/* select buffer from sqe->buf_group */ +#define IOSQE_BUFFER_SELECT (1U << IOSQE_BUFFER_SELECT_BIT) +/* don't post CQE if request succeeded */ +#define IOSQE_CQE_SKIP_SUCCESS (1U << IOSQE_CQE_SKIP_SUCCESS_BIT) + +/* + * io_uring_setup() flags + */ +#define IORING_SETUP_IOPOLL (1U << 0) /* io_context is polled */ +#define IORING_SETUP_SQPOLL (1U << 1) /* SQ poll thread */ +#define IORING_SETUP_SQ_AFF (1U << 2) /* sq_thread_cpu is valid */ +#define IORING_SETUP_CQSIZE (1U << 3) /* app defines CQ size */ +#define IORING_SETUP_CLAMP (1U << 4) /* clamp SQ/CQ ring sizes */ +#define IORING_SETUP_ATTACH_WQ (1U << 5) /* attach to existing wq */ +#define IORING_SETUP_R_DISABLED (1U << 6) /* start with ring disabled */ +#define IORING_SETUP_SUBMIT_ALL (1U << 7) /* continue submit on error */ +/* + * Cooperative task running. When requests complete, they often require + * forcing the submitter to transition to the kernel to complete. If this + * flag is set, work will be done when the task transitions anyway, rather + * than force an inter-processor interrupt reschedule. This avoids interrupting + * a task running in userspace, and saves an IPI. + */ +#define IORING_SETUP_COOP_TASKRUN (1U << 8) +/* + * If COOP_TASKRUN is set, get notified if task work is available for + * running and a kernel transition would be needed to run it. This sets + * IORING_SQ_TASKRUN in the sq ring flags. Not valid with COOP_TASKRUN. + */ +#define IORING_SETUP_TASKRUN_FLAG (1U << 9) +#define IORING_SETUP_SQE128 (1U << 10) /* SQEs are 128 byte */ +#define IORING_SETUP_CQE32 (1U << 11) /* CQEs are 32 byte */ +/* + * Only one task is allowed to submit requests + */ +#define IORING_SETUP_SINGLE_ISSUER (1U << 12) + +/* + * Defer running task work to get events. + * Rather than running bits of task work whenever the task transitions + * try to do it just before it is needed. + */ +#define IORING_SETUP_DEFER_TASKRUN (1U << 13) + +/* + * Application provides the memory for the rings + */ +#define IORING_SETUP_NO_MMAP (1U << 14) + +/* + * Register the ring fd in itself for use with + * IORING_REGISTER_USE_REGISTERED_RING; return a registered fd index rather + * than an fd. + */ +#define IORING_SETUP_REGISTERED_FD_ONLY (1U << 15) + +/* + * Removes indirection through the SQ index array. + */ +#define IORING_SETUP_NO_SQARRAY (1U << 16) + +enum io_uring_op { + IORING_OP_NOP, + IORING_OP_READV, + IORING_OP_WRITEV, + IORING_OP_FSYNC, + IORING_OP_READ_FIXED, + IORING_OP_WRITE_FIXED, + IORING_OP_POLL_ADD, + IORING_OP_POLL_REMOVE, + IORING_OP_SYNC_FILE_RANGE, + IORING_OP_SENDMSG, + IORING_OP_RECVMSG, + IORING_OP_TIMEOUT, + IORING_OP_TIMEOUT_REMOVE, + IORING_OP_ACCEPT, + IORING_OP_ASYNC_CANCEL, + IORING_OP_LINK_TIMEOUT, + IORING_OP_CONNECT, + IORING_OP_FALLOCATE, + IORING_OP_OPENAT, + IORING_OP_CLOSE, + IORING_OP_FILES_UPDATE, + IORING_OP_STATX, + IORING_OP_READ, + IORING_OP_WRITE, + IORING_OP_FADVISE, + IORING_OP_MADVISE, + IORING_OP_SEND, + IORING_OP_RECV, + IORING_OP_OPENAT2, + IORING_OP_EPOLL_CTL, + IORING_OP_SPLICE, + IORING_OP_PROVIDE_BUFFERS, + IORING_OP_REMOVE_BUFFERS, + IORING_OP_TEE, + IORING_OP_SHUTDOWN, + IORING_OP_RENAMEAT, + IORING_OP_UNLINKAT, + IORING_OP_MKDIRAT, + IORING_OP_SYMLINKAT, + IORING_OP_LINKAT, + IORING_OP_MSG_RING, + IORING_OP_FSETXATTR, + IORING_OP_SETXATTR, + IORING_OP_FGETXATTR, + IORING_OP_GETXATTR, + IORING_OP_SOCKET, + IORING_OP_URING_CMD, + IORING_OP_SEND_ZC, + IORING_OP_SENDMSG_ZC, + IORING_OP_READ_MULTISHOT, + IORING_OP_WAITID, + IORING_OP_FUTEX_WAIT, + IORING_OP_FUTEX_WAKE, + IORING_OP_FUTEX_WAITV, + + /* this goes last, obviously */ + IORING_OP_LAST, +}; + +/* + * sqe->uring_cmd_flags top 8bits aren't available for userspace + * IORING_URING_CMD_FIXED use registered buffer; pass this flag + * along with setting sqe->buf_index. + */ +#define IORING_URING_CMD_FIXED (1U << 0) +#define IORING_URING_CMD_MASK IORING_URING_CMD_FIXED + + +/* + * sqe->fsync_flags + */ +#define IORING_FSYNC_DATASYNC (1U << 0) + +/* + * sqe->timeout_flags + */ +#define IORING_TIMEOUT_ABS (1U << 0) +#define IORING_TIMEOUT_UPDATE (1U << 1) +#define IORING_TIMEOUT_BOOTTIME (1U << 2) +#define IORING_TIMEOUT_REALTIME (1U << 3) +#define IORING_LINK_TIMEOUT_UPDATE (1U << 4) +#define IORING_TIMEOUT_ETIME_SUCCESS (1U << 5) +#define IORING_TIMEOUT_MULTISHOT (1U << 6) +#define IORING_TIMEOUT_CLOCK_MASK (IORING_TIMEOUT_BOOTTIME | IORING_TIMEOUT_REALTIME) +#define IORING_TIMEOUT_UPDATE_MASK (IORING_TIMEOUT_UPDATE | IORING_LINK_TIMEOUT_UPDATE) +/* + * sqe->splice_flags + * extends splice(2) flags + */ +#define SPLICE_F_FD_IN_FIXED (1U << 31) /* the last bit of __u32 */ + +/* + * POLL_ADD flags. Note that since sqe->poll_events is the flag space, the + * command flags for POLL_ADD are stored in sqe->len. + * + * IORING_POLL_ADD_MULTI Multishot poll. Sets IORING_CQE_F_MORE if + * the poll handler will continue to report + * CQEs on behalf of the same SQE. + * + * IORING_POLL_UPDATE Update existing poll request, matching + * sqe->addr as the old user_data field. + * + * IORING_POLL_LEVEL Level triggered poll. + */ +#define IORING_POLL_ADD_MULTI (1U << 0) +#define IORING_POLL_UPDATE_EVENTS (1U << 1) +#define IORING_POLL_UPDATE_USER_DATA (1U << 2) +#define IORING_POLL_ADD_LEVEL (1U << 3) + +/* + * ASYNC_CANCEL flags. + * + * IORING_ASYNC_CANCEL_ALL Cancel all requests that match the given key + * IORING_ASYNC_CANCEL_FD Key off 'fd' for cancelation rather than the + * request 'user_data' + * IORING_ASYNC_CANCEL_ANY Match any request + * IORING_ASYNC_CANCEL_FD_FIXED 'fd' passed in is a fixed descriptor + * IORING_ASYNC_CANCEL_USERDATA Match on user_data, default for no other key + * IORING_ASYNC_CANCEL_OP Match request based on opcode + */ +#define IORING_ASYNC_CANCEL_ALL (1U << 0) +#define IORING_ASYNC_CANCEL_FD (1U << 1) +#define IORING_ASYNC_CANCEL_ANY (1U << 2) +#define IORING_ASYNC_CANCEL_FD_FIXED (1U << 3) +#define IORING_ASYNC_CANCEL_USERDATA (1U << 4) +#define IORING_ASYNC_CANCEL_OP (1U << 5) + +/* + * send/sendmsg and recv/recvmsg flags (sqe->ioprio) + * + * IORING_RECVSEND_POLL_FIRST If set, instead of first attempting to send + * or receive and arm poll if that yields an + * -EAGAIN result, arm poll upfront and skip + * the initial transfer attempt. + * + * IORING_RECV_MULTISHOT Multishot recv. Sets IORING_CQE_F_MORE if + * the handler will continue to report + * CQEs on behalf of the same SQE. + * + * IORING_RECVSEND_FIXED_BUF Use registered buffers, the index is stored in + * the buf_index field. + * + * IORING_SEND_ZC_REPORT_USAGE + * If set, SEND[MSG]_ZC should report + * the zerocopy usage in cqe.res + * for the IORING_CQE_F_NOTIF cqe. + * 0 is reported if zerocopy was actually possible. + * IORING_NOTIF_USAGE_ZC_COPIED if data was copied + * (at least partially). + */ +#define IORING_RECVSEND_POLL_FIRST (1U << 0) +#define IORING_RECV_MULTISHOT (1U << 1) +#define IORING_RECVSEND_FIXED_BUF (1U << 2) +#define IORING_SEND_ZC_REPORT_USAGE (1U << 3) + +/* + * cqe.res for IORING_CQE_F_NOTIF if + * IORING_SEND_ZC_REPORT_USAGE was requested + * + * It should be treated as a flag, all other + * bits of cqe.res should be treated as reserved! + */ +#define IORING_NOTIF_USAGE_ZC_COPIED (1U << 31) + +/* + * accept flags stored in sqe->ioprio + */ +#define IORING_ACCEPT_MULTISHOT (1U << 0) + +/* + * IORING_OP_MSG_RING command types, stored in sqe->addr + */ +enum { + IORING_MSG_DATA, /* pass sqe->len as 'res' and off as user_data */ + IORING_MSG_SEND_FD, /* send a registered fd to another ring */ +}; + +/* + * IORING_OP_MSG_RING flags (sqe->msg_ring_flags) + * + * IORING_MSG_RING_CQE_SKIP Don't post a CQE to the target ring. Not + * applicable for IORING_MSG_DATA, obviously. + */ +#define IORING_MSG_RING_CQE_SKIP (1U << 0) +/* Pass through the flags from sqe->file_index to cqe->flags */ +#define IORING_MSG_RING_FLAGS_PASS (1U << 1) + +/* + * IO completion data structure (Completion Queue Entry) + */ +struct io_uring_cqe { + __u64 user_data; /* sqe->data submission passed back */ + __s32 res; /* result code for this event */ + __u32 flags; + + /* + * If the ring is initialized with IORING_SETUP_CQE32, then this field + * contains 16-bytes of padding, doubling the size of the CQE. + */ + __u64 big_cqe[]; +}; + +/* + * cqe->flags + * + * IORING_CQE_F_BUFFER If set, the upper 16 bits are the buffer ID + * IORING_CQE_F_MORE If set, parent SQE will generate more CQE entries + * IORING_CQE_F_SOCK_NONEMPTY If set, more data to read after socket recv + * IORING_CQE_F_NOTIF Set for notification CQEs. Can be used to distinct + * them from sends. + */ +#define IORING_CQE_F_BUFFER (1U << 0) +#define IORING_CQE_F_MORE (1U << 1) +#define IORING_CQE_F_SOCK_NONEMPTY (1U << 2) +#define IORING_CQE_F_NOTIF (1U << 3) + +enum { + IORING_CQE_BUFFER_SHIFT = 16, +}; + +/* + * Magic offsets for the application to mmap the data it needs + */ +#define IORING_OFF_SQ_RING 0ULL +#define IORING_OFF_CQ_RING 0x8000000ULL +#define IORING_OFF_SQES 0x10000000ULL +#define IORING_OFF_PBUF_RING 0x80000000ULL +#define IORING_OFF_PBUF_SHIFT 16 +#define IORING_OFF_MMAP_MASK 0xf8000000ULL + +/* + * Filled with the offset for mmap(2) + */ +struct io_sqring_offsets { + __u32 head; + __u32 tail; + __u32 ring_mask; + __u32 ring_entries; + __u32 flags; + __u32 dropped; + __u32 array; + __u32 resv1; + __u64 user_addr; +}; + +/* + * sq_ring->flags + */ +#define IORING_SQ_NEED_WAKEUP (1U << 0) /* needs io_uring_enter wakeup */ +#define IORING_SQ_CQ_OVERFLOW (1U << 1) /* CQ ring is overflown */ +#define IORING_SQ_TASKRUN (1U << 2) /* task should enter the kernel */ + +struct io_cqring_offsets { + __u32 head; + __u32 tail; + __u32 ring_mask; + __u32 ring_entries; + __u32 overflow; + __u32 cqes; + __u32 flags; + __u32 resv1; + __u64 user_addr; +}; + +/* + * cq_ring->flags + */ + +/* disable eventfd notifications */ +#define IORING_CQ_EVENTFD_DISABLED (1U << 0) + +/* + * io_uring_enter(2) flags + */ +#define IORING_ENTER_GETEVENTS (1U << 0) +#define IORING_ENTER_SQ_WAKEUP (1U << 1) +#define IORING_ENTER_SQ_WAIT (1U << 2) +#define IORING_ENTER_EXT_ARG (1U << 3) +#define IORING_ENTER_REGISTERED_RING (1U << 4) + +/* + * Passed in for io_uring_setup(2). Copied back with updated info on success + */ +struct io_uring_params { + __u32 sq_entries; + __u32 cq_entries; + __u32 flags; + __u32 sq_thread_cpu; + __u32 sq_thread_idle; + __u32 features; + __u32 wq_fd; + __u32 resv[3]; + struct io_sqring_offsets sq_off; + struct io_cqring_offsets cq_off; +}; + +/* + * io_uring_params->features flags + */ +#define IORING_FEAT_SINGLE_MMAP (1U << 0) +#define IORING_FEAT_NODROP (1U << 1) +#define IORING_FEAT_SUBMIT_STABLE (1U << 2) +#define IORING_FEAT_RW_CUR_POS (1U << 3) +#define IORING_FEAT_CUR_PERSONALITY (1U << 4) +#define IORING_FEAT_FAST_POLL (1U << 5) +#define IORING_FEAT_POLL_32BITS (1U << 6) +#define IORING_FEAT_SQPOLL_NONFIXED (1U << 7) +#define IORING_FEAT_EXT_ARG (1U << 8) +#define IORING_FEAT_NATIVE_WORKERS (1U << 9) +#define IORING_FEAT_RSRC_TAGS (1U << 10) +#define IORING_FEAT_CQE_SKIP (1U << 11) +#define IORING_FEAT_LINKED_FILE (1U << 12) +#define IORING_FEAT_REG_REG_RING (1U << 13) + +/* + * io_uring_register(2) opcodes and arguments + */ +enum { + IORING_REGISTER_BUFFERS = 0, + IORING_UNREGISTER_BUFFERS = 1, + IORING_REGISTER_FILES = 2, + IORING_UNREGISTER_FILES = 3, + IORING_REGISTER_EVENTFD = 4, + IORING_UNREGISTER_EVENTFD = 5, + IORING_REGISTER_FILES_UPDATE = 6, + IORING_REGISTER_EVENTFD_ASYNC = 7, + IORING_REGISTER_PROBE = 8, + IORING_REGISTER_PERSONALITY = 9, + IORING_UNREGISTER_PERSONALITY = 10, + IORING_REGISTER_RESTRICTIONS = 11, + IORING_REGISTER_ENABLE_RINGS = 12, + + /* extended with tagging */ + IORING_REGISTER_FILES2 = 13, + IORING_REGISTER_FILES_UPDATE2 = 14, + IORING_REGISTER_BUFFERS2 = 15, + IORING_REGISTER_BUFFERS_UPDATE = 16, + + /* set/clear io-wq thread affinities */ + IORING_REGISTER_IOWQ_AFF = 17, + IORING_UNREGISTER_IOWQ_AFF = 18, + + /* set/get max number of io-wq workers */ + IORING_REGISTER_IOWQ_MAX_WORKERS = 19, + + /* register/unregister io_uring fd with the ring */ + IORING_REGISTER_RING_FDS = 20, + IORING_UNREGISTER_RING_FDS = 21, + + /* register ring based provide buffer group */ + IORING_REGISTER_PBUF_RING = 22, + IORING_UNREGISTER_PBUF_RING = 23, + + /* sync cancelation API */ + IORING_REGISTER_SYNC_CANCEL = 24, + + /* register a range of fixed file slots for automatic slot allocation */ + IORING_REGISTER_FILE_ALLOC_RANGE = 25, + + /* this goes last */ + IORING_REGISTER_LAST, + + /* flag added to the opcode to use a registered ring fd */ + IORING_REGISTER_USE_REGISTERED_RING = 1U << 31 +}; + +/* io-wq worker categories */ +enum { + IO_WQ_BOUND, + IO_WQ_UNBOUND, +}; + +/* deprecated, see struct io_uring_rsrc_update */ +struct io_uring_files_update { + __u32 offset; + __u32 resv; + __aligned_u64 /* __s32 * */ fds; +}; + +/* + * Register a fully sparse file space, rather than pass in an array of all + * -1 file descriptors. + */ +#define IORING_RSRC_REGISTER_SPARSE (1U << 0) + +struct io_uring_rsrc_register { + __u32 nr; + __u32 flags; + __u64 resv2; + __aligned_u64 data; + __aligned_u64 tags; +}; + +struct io_uring_rsrc_update { + __u32 offset; + __u32 resv; + __aligned_u64 data; +}; + +struct io_uring_rsrc_update2 { + __u32 offset; + __u32 resv; + __aligned_u64 data; + __aligned_u64 tags; + __u32 nr; + __u32 resv2; +}; + +/* Skip updating fd indexes set to this value in the fd table */ +#define IORING_REGISTER_FILES_SKIP (-2) + +#define IO_URING_OP_SUPPORTED (1U << 0) + +struct io_uring_probe_op { + __u8 op; + __u8 resv; + __u16 flags; /* IO_URING_OP_* flags */ + __u32 resv2; +}; + +struct io_uring_probe { + __u8 last_op; /* last opcode supported */ + __u8 ops_len; /* length of ops[] array below */ + __u16 resv; + __u32 resv2[3]; + struct io_uring_probe_op ops[]; +}; + +struct io_uring_restriction { + __u16 opcode; + union { + __u8 register_op; /* IORING_RESTRICTION_REGISTER_OP */ + __u8 sqe_op; /* IORING_RESTRICTION_SQE_OP */ + __u8 sqe_flags; /* IORING_RESTRICTION_SQE_FLAGS_* */ + }; + __u8 resv; + __u32 resv2[3]; +}; + +struct io_uring_buf { + __u64 addr; + __u32 len; + __u16 bid; + __u16 resv; +}; + +struct io_uring_buf_ring { + union { + /* + * To avoid spilling into more pages than we need to, the + * ring tail is overlaid with the io_uring_buf->resv field. + */ + struct { + __u64 resv1; + __u32 resv2; + __u16 resv3; + __u16 tail; + }; + __DECLARE_FLEX_ARRAY(struct io_uring_buf, bufs); + }; +}; + +/* + * Flags for IORING_REGISTER_PBUF_RING. + * + * IOU_PBUF_RING_MMAP: If set, kernel will allocate the memory for the ring. + * The application must not set a ring_addr in struct + * io_uring_buf_reg, instead it must subsequently call + * mmap(2) with the offset set as: + * IORING_OFF_PBUF_RING | (bgid << IORING_OFF_PBUF_SHIFT) + * to get a virtual mapping for the ring. + */ +enum { + IOU_PBUF_RING_MMAP = 1, +}; + +/* argument for IORING_(UN)REGISTER_PBUF_RING */ +struct io_uring_buf_reg { + __u64 ring_addr; + __u32 ring_entries; + __u16 bgid; + __u16 flags; + __u64 resv[3]; +}; + +/* + * io_uring_restriction->opcode values + */ +enum { + /* Allow an io_uring_register(2) opcode */ + IORING_RESTRICTION_REGISTER_OP = 0, + + /* Allow an sqe opcode */ + IORING_RESTRICTION_SQE_OP = 1, + + /* Allow sqe flags */ + IORING_RESTRICTION_SQE_FLAGS_ALLOWED = 2, + + /* Require sqe flags (these flags must be set on each submission) */ + IORING_RESTRICTION_SQE_FLAGS_REQUIRED = 3, + + IORING_RESTRICTION_LAST +}; + +struct io_uring_getevents_arg { + __u64 sigmask; + __u32 sigmask_sz; + __u32 pad; + __u64 ts; +}; + +/* + * Argument for IORING_REGISTER_SYNC_CANCEL + */ +struct io_uring_sync_cancel_reg { + __u64 addr; + __s32 fd; + __u32 flags; + struct __kernel_timespec timeout; + __u8 opcode; + __u8 pad[7]; + __u64 pad2[3]; +}; + +/* + * Argument for IORING_REGISTER_FILE_ALLOC_RANGE + * The range is specified as [off, off + len) + */ +struct io_uring_file_index_range { + __u32 off; + __u32 len; + __u64 resv; +}; + +struct io_uring_recvmsg_out { + __u32 namelen; + __u32 controllen; + __u32 payloadlen; + __u32 flags; +}; + +/* + * Argument for IORING_OP_URING_CMD when file is a socket + */ +enum { + SOCKET_URING_OP_SIOCINQ = 0, + SOCKET_URING_OP_SIOCOUTQ, + SOCKET_URING_OP_GETSOCKOPT, + SOCKET_URING_OP_SETSOCKOPT, +}; + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/tools/include/uapi/linux/kcmp.h b/tools/include/uapi/linux/kcmp.h new file mode 100644 index 000000000000..ef1305010925 --- /dev/null +++ b/tools/include/uapi/linux/kcmp.h @@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _UAPI_LINUX_KCMP_H +#define _UAPI_LINUX_KCMP_H + +#include <linux/types.h> + +/* Comparison type */ +enum kcmp_type { + KCMP_FILE, + KCMP_VM, + KCMP_FILES, + KCMP_FS, + KCMP_SIGHAND, + KCMP_IO, + KCMP_SYSVSEM, + KCMP_EPOLL_TFD, + + KCMP_TYPES, +}; + +/* Slot for KCMP_EPOLL_TFD */ +struct kcmp_epoll_slot { + __u32 efd; /* epoll file descriptor */ + __u32 tfd; /* target file number */ + __u32 toff; /* target offset within same numbered sequence */ +}; + +#endif /* _UAPI_LINUX_KCMP_H */ diff --git a/tools/include/uapi/linux/kvm.h b/tools/include/uapi/linux/kvm.h new file mode 100644 index 000000000000..52f6000ab020 --- /dev/null +++ b/tools/include/uapi/linux/kvm.h @@ -0,0 +1,1620 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __LINUX_KVM_H +#define __LINUX_KVM_H + +/* + * Userspace interface for /dev/kvm - kernel based virtual machine + * + * Note: you must update KVM_API_VERSION if you change this interface. + */ + +#include <linux/const.h> +#include <linux/types.h> +#include <linux/compiler.h> +#include <linux/ioctl.h> +#include <asm/kvm.h> + +#define KVM_API_VERSION 12 + +/* + * Backwards-compatible definitions. + */ +#define __KVM_HAVE_GUEST_DEBUG + +/* for KVM_SET_USER_MEMORY_REGION */ +struct kvm_userspace_memory_region { + __u32 slot; + __u32 flags; + __u64 guest_phys_addr; + __u64 memory_size; /* bytes */ + __u64 userspace_addr; /* start of the userspace allocated memory */ +}; + +/* for KVM_SET_USER_MEMORY_REGION2 */ +struct kvm_userspace_memory_region2 { + __u32 slot; + __u32 flags; + __u64 guest_phys_addr; + __u64 memory_size; + __u64 userspace_addr; + __u64 guest_memfd_offset; + __u32 guest_memfd; + __u32 pad1; + __u64 pad2[14]; +}; + +/* + * The bit 0 ~ bit 15 of kvm_userspace_memory_region::flags are visible for + * userspace, other bits are reserved for kvm internal use which are defined + * in include/linux/kvm_host.h. + */ +#define KVM_MEM_LOG_DIRTY_PAGES (1UL << 0) +#define KVM_MEM_READONLY (1UL << 1) +#define KVM_MEM_GUEST_MEMFD (1UL << 2) + +/* for KVM_IRQ_LINE */ +struct kvm_irq_level { + /* + * ACPI gsi notion of irq. + * For IA-64 (APIC model) IOAPIC0: irq 0-23; IOAPIC1: irq 24-47.. + * For X86 (standard AT mode) PIC0/1: irq 0-15. IOAPIC0: 0-23.. + * For ARM: See Documentation/virt/kvm/api.rst + */ + union { + __u32 irq; + __s32 status; + }; + __u32 level; +}; + + +struct kvm_irqchip { + __u32 chip_id; + __u32 pad; + union { + char dummy[512]; /* reserving space */ +#ifdef __KVM_HAVE_PIT + struct kvm_pic_state pic; +#endif +#ifdef __KVM_HAVE_IOAPIC + struct kvm_ioapic_state ioapic; +#endif + } chip; +}; + +/* for KVM_CREATE_PIT2 */ +struct kvm_pit_config { + __u32 flags; + __u32 pad[15]; +}; + +#define KVM_PIT_SPEAKER_DUMMY 1 + +struct kvm_hyperv_exit { +#define KVM_EXIT_HYPERV_SYNIC 1 +#define KVM_EXIT_HYPERV_HCALL 2 +#define KVM_EXIT_HYPERV_SYNDBG 3 + __u32 type; + __u32 pad1; + union { + struct { + __u32 msr; + __u32 pad2; + __u64 control; + __u64 evt_page; + __u64 msg_page; + } synic; + struct { + __u64 input; + __u64 result; + __u64 params[2]; + } hcall; + struct { + __u32 msr; + __u32 pad2; + __u64 control; + __u64 status; + __u64 send_page; + __u64 recv_page; + __u64 pending_page; + } syndbg; + } u; +}; + +struct kvm_xen_exit { +#define KVM_EXIT_XEN_HCALL 1 + __u32 type; + union { + struct { + __u32 longmode; + __u32 cpl; + __u64 input; + __u64 result; + __u64 params[6]; + } hcall; + } u; +}; + +#define KVM_S390_GET_SKEYS_NONE 1 +#define KVM_S390_SKEYS_MAX 1048576 + +#define KVM_EXIT_UNKNOWN 0 +#define KVM_EXIT_EXCEPTION 1 +#define KVM_EXIT_IO 2 +#define KVM_EXIT_HYPERCALL 3 +#define KVM_EXIT_DEBUG 4 +#define KVM_EXIT_HLT 5 +#define KVM_EXIT_MMIO 6 +#define KVM_EXIT_IRQ_WINDOW_OPEN 7 +#define KVM_EXIT_SHUTDOWN 8 +#define KVM_EXIT_FAIL_ENTRY 9 +#define KVM_EXIT_INTR 10 +#define KVM_EXIT_SET_TPR 11 +#define KVM_EXIT_TPR_ACCESS 12 +#define KVM_EXIT_S390_SIEIC 13 +#define KVM_EXIT_S390_RESET 14 +#define KVM_EXIT_DCR 15 /* deprecated */ +#define KVM_EXIT_NMI 16 +#define KVM_EXIT_INTERNAL_ERROR 17 +#define KVM_EXIT_OSI 18 +#define KVM_EXIT_PAPR_HCALL 19 +#define KVM_EXIT_S390_UCONTROL 20 +#define KVM_EXIT_WATCHDOG 21 +#define KVM_EXIT_S390_TSCH 22 +#define KVM_EXIT_EPR 23 +#define KVM_EXIT_SYSTEM_EVENT 24 +#define KVM_EXIT_S390_STSI 25 +#define KVM_EXIT_IOAPIC_EOI 26 +#define KVM_EXIT_HYPERV 27 +#define KVM_EXIT_ARM_NISV 28 +#define KVM_EXIT_X86_RDMSR 29 +#define KVM_EXIT_X86_WRMSR 30 +#define KVM_EXIT_DIRTY_RING_FULL 31 +#define KVM_EXIT_AP_RESET_HOLD 32 +#define KVM_EXIT_X86_BUS_LOCK 33 +#define KVM_EXIT_XEN 34 +#define KVM_EXIT_RISCV_SBI 35 +#define KVM_EXIT_RISCV_CSR 36 +#define KVM_EXIT_NOTIFY 37 +#define KVM_EXIT_LOONGARCH_IOCSR 38 +#define KVM_EXIT_MEMORY_FAULT 39 +#define KVM_EXIT_TDX 40 + +/* For KVM_EXIT_INTERNAL_ERROR */ +/* Emulate instruction failed. */ +#define KVM_INTERNAL_ERROR_EMULATION 1 +/* Encounter unexpected simultaneous exceptions. */ +#define KVM_INTERNAL_ERROR_SIMUL_EX 2 +/* Encounter unexpected vm-exit due to delivery event. */ +#define KVM_INTERNAL_ERROR_DELIVERY_EV 3 +/* Encounter unexpected vm-exit reason */ +#define KVM_INTERNAL_ERROR_UNEXPECTED_EXIT_REASON 4 + +/* Flags that describe what fields in emulation_failure hold valid data. */ +#define KVM_INTERNAL_ERROR_EMULATION_FLAG_INSTRUCTION_BYTES (1ULL << 0) + +/* + * struct kvm_run can be modified by userspace at any time, so KVM must be + * careful to avoid TOCTOU bugs. In order to protect KVM, HINT_UNSAFE_IN_KVM() + * renames fields in struct kvm_run from <symbol> to <symbol>__unsafe when + * compiled into the kernel, ensuring that any use within KVM is obvious and + * gets extra scrutiny. + */ +#ifdef __KERNEL__ +#define HINT_UNSAFE_IN_KVM(_symbol) _symbol##__unsafe +#else +#define HINT_UNSAFE_IN_KVM(_symbol) _symbol +#endif + +/* for KVM_RUN, returned by mmap(vcpu_fd, offset=0) */ +struct kvm_run { + /* in */ + __u8 request_interrupt_window; + __u8 HINT_UNSAFE_IN_KVM(immediate_exit); + __u8 padding1[6]; + + /* out */ + __u32 exit_reason; + __u8 ready_for_interrupt_injection; + __u8 if_flag; + __u16 flags; + + /* in (pre_kvm_run), out (post_kvm_run) */ + __u64 cr8; + __u64 apic_base; + +#ifdef __KVM_S390 + /* the processor status word for s390 */ + __u64 psw_mask; /* psw upper half */ + __u64 psw_addr; /* psw lower half */ +#endif + union { + /* KVM_EXIT_UNKNOWN */ + struct { + __u64 hardware_exit_reason; + } hw; + /* KVM_EXIT_FAIL_ENTRY */ + struct { + __u64 hardware_entry_failure_reason; + __u32 cpu; + } fail_entry; + /* KVM_EXIT_EXCEPTION */ + struct { + __u32 exception; + __u32 error_code; + } ex; + /* KVM_EXIT_IO */ + struct { +#define KVM_EXIT_IO_IN 0 +#define KVM_EXIT_IO_OUT 1 + __u8 direction; + __u8 size; /* bytes */ + __u16 port; + __u32 count; + __u64 data_offset; /* relative to kvm_run start */ + } io; + /* KVM_EXIT_DEBUG */ + struct { + struct kvm_debug_exit_arch arch; + } debug; + /* KVM_EXIT_MMIO */ + struct { + __u64 phys_addr; + __u8 data[8]; + __u32 len; + __u8 is_write; + } mmio; + /* KVM_EXIT_LOONGARCH_IOCSR */ + struct { + __u64 phys_addr; + __u8 data[8]; + __u32 len; + __u8 is_write; + } iocsr_io; + /* KVM_EXIT_HYPERCALL */ + struct { + __u64 nr; + __u64 args[6]; + __u64 ret; + + union { +#ifndef __KERNEL__ + __u32 longmode; +#endif + __u64 flags; + }; + } hypercall; + /* KVM_EXIT_TPR_ACCESS */ + struct { + __u64 rip; + __u32 is_write; + __u32 pad; + } tpr_access; + /* KVM_EXIT_S390_SIEIC */ + struct { + __u8 icptcode; + __u16 ipa; + __u32 ipb; + } s390_sieic; + /* KVM_EXIT_S390_RESET */ + __u64 s390_reset_flags; + /* KVM_EXIT_S390_UCONTROL */ + struct { + __u64 trans_exc_code; + __u32 pgm_code; + } s390_ucontrol; + /* KVM_EXIT_DCR (deprecated) */ + struct { + __u32 dcrn; + __u32 data; + __u8 is_write; + } dcr; + /* KVM_EXIT_INTERNAL_ERROR */ + struct { + __u32 suberror; + /* Available with KVM_CAP_INTERNAL_ERROR_DATA: */ + __u32 ndata; + __u64 data[16]; + } internal; + /* + * KVM_INTERNAL_ERROR_EMULATION + * + * "struct emulation_failure" is an overlay of "struct internal" + * that is used for the KVM_INTERNAL_ERROR_EMULATION sub-type of + * KVM_EXIT_INTERNAL_ERROR. Note, unlike other internal error + * sub-types, this struct is ABI! It also needs to be backwards + * compatible with "struct internal". Take special care that + * "ndata" is correct, that new fields are enumerated in "flags", + * and that each flag enumerates fields that are 64-bit aligned + * and sized (so that ndata+internal.data[] is valid/accurate). + * + * Space beyond the defined fields may be used to store arbitrary + * debug information relating to the emulation failure. It is + * accounted for in "ndata" but the format is unspecified and is + * not represented in "flags". Any such information is *not* ABI! + */ + struct { + __u32 suberror; + __u32 ndata; + __u64 flags; + union { + struct { + __u8 insn_size; + __u8 insn_bytes[15]; + }; + }; + /* Arbitrary debug data may follow. */ + } emulation_failure; + /* KVM_EXIT_OSI */ + struct { + __u64 gprs[32]; + } osi; + /* KVM_EXIT_PAPR_HCALL */ + struct { + __u64 nr; + __u64 ret; + __u64 args[9]; + } papr_hcall; + /* KVM_EXIT_S390_TSCH */ + struct { + __u16 subchannel_id; + __u16 subchannel_nr; + __u32 io_int_parm; + __u32 io_int_word; + __u32 ipb; + __u8 dequeued; + } s390_tsch; + /* KVM_EXIT_EPR */ + struct { + __u32 epr; + } epr; + /* KVM_EXIT_SYSTEM_EVENT */ + struct { +#define KVM_SYSTEM_EVENT_SHUTDOWN 1 +#define KVM_SYSTEM_EVENT_RESET 2 +#define KVM_SYSTEM_EVENT_CRASH 3 +#define KVM_SYSTEM_EVENT_WAKEUP 4 +#define KVM_SYSTEM_EVENT_SUSPEND 5 +#define KVM_SYSTEM_EVENT_SEV_TERM 6 +#define KVM_SYSTEM_EVENT_TDX_FATAL 7 + __u32 type; + __u32 ndata; + union { +#ifndef __KERNEL__ + __u64 flags; +#endif + __u64 data[16]; + }; + } system_event; + /* KVM_EXIT_S390_STSI */ + struct { + __u64 addr; + __u8 ar; + __u8 reserved; + __u8 fc; + __u8 sel1; + __u16 sel2; + } s390_stsi; + /* KVM_EXIT_IOAPIC_EOI */ + struct { + __u8 vector; + } eoi; + /* KVM_EXIT_HYPERV */ + struct kvm_hyperv_exit hyperv; + /* KVM_EXIT_ARM_NISV */ + struct { + __u64 esr_iss; + __u64 fault_ipa; + } arm_nisv; + /* KVM_EXIT_X86_RDMSR / KVM_EXIT_X86_WRMSR */ + struct { + __u8 error; /* user -> kernel */ + __u8 pad[7]; +#define KVM_MSR_EXIT_REASON_INVAL (1 << 0) +#define KVM_MSR_EXIT_REASON_UNKNOWN (1 << 1) +#define KVM_MSR_EXIT_REASON_FILTER (1 << 2) +#define KVM_MSR_EXIT_REASON_VALID_MASK (KVM_MSR_EXIT_REASON_INVAL | \ + KVM_MSR_EXIT_REASON_UNKNOWN | \ + KVM_MSR_EXIT_REASON_FILTER) + __u32 reason; /* kernel -> user */ + __u32 index; /* kernel -> user */ + __u64 data; /* kernel <-> user */ + } msr; + /* KVM_EXIT_XEN */ + struct kvm_xen_exit xen; + /* KVM_EXIT_RISCV_SBI */ + struct { + unsigned long extension_id; + unsigned long function_id; + unsigned long args[6]; + unsigned long ret[2]; + } riscv_sbi; + /* KVM_EXIT_RISCV_CSR */ + struct { + unsigned long csr_num; + unsigned long new_value; + unsigned long write_mask; + unsigned long ret_value; + } riscv_csr; + /* KVM_EXIT_NOTIFY */ + struct { +#define KVM_NOTIFY_CONTEXT_INVALID (1 << 0) + __u32 flags; + } notify; + /* KVM_EXIT_MEMORY_FAULT */ + struct { +#define KVM_MEMORY_EXIT_FLAG_PRIVATE (1ULL << 3) + __u64 flags; + __u64 gpa; + __u64 size; + } memory_fault; + /* KVM_EXIT_TDX */ + struct { + __u64 flags; + __u64 nr; + union { + struct { + __u64 ret; + __u64 data[5]; + } unknown; + struct { + __u64 ret; + __u64 gpa; + __u64 size; + } get_quote; + struct { + __u64 ret; + __u64 leaf; + __u64 r11, r12, r13, r14; + } get_tdvmcall_info; + struct { + __u64 ret; + __u64 vector; + } setup_event_notify; + }; + } tdx; + /* Fix the size of the union. */ + char padding[256]; + }; + + /* 2048 is the size of the char array used to bound/pad the size + * of the union that holds sync regs. + */ + #define SYNC_REGS_SIZE_BYTES 2048 + /* + * shared registers between kvm and userspace. + * kvm_valid_regs specifies the register classes set by the host + * kvm_dirty_regs specified the register classes dirtied by userspace + * struct kvm_sync_regs is architecture specific, as well as the + * bits for kvm_valid_regs and kvm_dirty_regs + */ + __u64 kvm_valid_regs; + __u64 kvm_dirty_regs; + union { + struct kvm_sync_regs regs; + char padding[SYNC_REGS_SIZE_BYTES]; + } s; +}; + +/* for KVM_REGISTER_COALESCED_MMIO / KVM_UNREGISTER_COALESCED_MMIO */ + +struct kvm_coalesced_mmio_zone { + __u64 addr; + __u32 size; + union { + __u32 pad; + __u32 pio; + }; +}; + +struct kvm_coalesced_mmio { + __u64 phys_addr; + __u32 len; + union { + __u32 pad; + __u32 pio; + }; + __u8 data[8]; +}; + +struct kvm_coalesced_mmio_ring { + __u32 first, last; + struct kvm_coalesced_mmio coalesced_mmio[]; +}; + +#define KVM_COALESCED_MMIO_MAX \ + ((PAGE_SIZE - sizeof(struct kvm_coalesced_mmio_ring)) / \ + sizeof(struct kvm_coalesced_mmio)) + +/* for KVM_TRANSLATE */ +struct kvm_translation { + /* in */ + __u64 linear_address; + + /* out */ + __u64 physical_address; + __u8 valid; + __u8 writeable; + __u8 usermode; + __u8 pad[5]; +}; + +/* for KVM_INTERRUPT */ +struct kvm_interrupt { + /* in */ + __u32 irq; +}; + +/* for KVM_GET_DIRTY_LOG */ +struct kvm_dirty_log { + __u32 slot; + __u32 padding1; + union { + void __user *dirty_bitmap; /* one bit per page */ + __u64 padding2; + }; +}; + +/* for KVM_CLEAR_DIRTY_LOG */ +struct kvm_clear_dirty_log { + __u32 slot; + __u32 num_pages; + __u64 first_page; + union { + void __user *dirty_bitmap; /* one bit per page */ + __u64 padding2; + }; +}; + +/* for KVM_SET_SIGNAL_MASK */ +struct kvm_signal_mask { + __u32 len; + __u8 sigset[]; +}; + +/* for KVM_TPR_ACCESS_REPORTING */ +struct kvm_tpr_access_ctl { + __u32 enabled; + __u32 flags; + __u32 reserved[8]; +}; + +/* for KVM_SET_VAPIC_ADDR */ +struct kvm_vapic_addr { + __u64 vapic_addr; +}; + +/* for KVM_SET_MP_STATE */ + +/* not all states are valid on all architectures */ +#define KVM_MP_STATE_RUNNABLE 0 +#define KVM_MP_STATE_UNINITIALIZED 1 +#define KVM_MP_STATE_INIT_RECEIVED 2 +#define KVM_MP_STATE_HALTED 3 +#define KVM_MP_STATE_SIPI_RECEIVED 4 +#define KVM_MP_STATE_STOPPED 5 +#define KVM_MP_STATE_CHECK_STOP 6 +#define KVM_MP_STATE_OPERATING 7 +#define KVM_MP_STATE_LOAD 8 +#define KVM_MP_STATE_AP_RESET_HOLD 9 +#define KVM_MP_STATE_SUSPENDED 10 + +struct kvm_mp_state { + __u32 mp_state; +}; + +/* for KVM_SET_GUEST_DEBUG */ + +#define KVM_GUESTDBG_ENABLE 0x00000001 +#define KVM_GUESTDBG_SINGLESTEP 0x00000002 + +struct kvm_guest_debug { + __u32 control; + __u32 pad; + struct kvm_guest_debug_arch arch; +}; + +enum { + kvm_ioeventfd_flag_nr_datamatch, + kvm_ioeventfd_flag_nr_pio, + kvm_ioeventfd_flag_nr_deassign, + kvm_ioeventfd_flag_nr_virtio_ccw_notify, + kvm_ioeventfd_flag_nr_fast_mmio, + kvm_ioeventfd_flag_nr_max, +}; + +#define KVM_IOEVENTFD_FLAG_DATAMATCH (1 << kvm_ioeventfd_flag_nr_datamatch) +#define KVM_IOEVENTFD_FLAG_PIO (1 << kvm_ioeventfd_flag_nr_pio) +#define KVM_IOEVENTFD_FLAG_DEASSIGN (1 << kvm_ioeventfd_flag_nr_deassign) +#define KVM_IOEVENTFD_FLAG_VIRTIO_CCW_NOTIFY \ + (1 << kvm_ioeventfd_flag_nr_virtio_ccw_notify) + +#define KVM_IOEVENTFD_VALID_FLAG_MASK ((1 << kvm_ioeventfd_flag_nr_max) - 1) + +struct kvm_ioeventfd { + __u64 datamatch; + __u64 addr; /* legal pio/mmio address */ + __u32 len; /* 1, 2, 4, or 8 bytes; or 0 to ignore length */ + __s32 fd; + __u32 flags; + __u8 pad[36]; +}; + +#define KVM_X86_DISABLE_EXITS_MWAIT (1 << 0) +#define KVM_X86_DISABLE_EXITS_HLT (1 << 1) +#define KVM_X86_DISABLE_EXITS_PAUSE (1 << 2) +#define KVM_X86_DISABLE_EXITS_CSTATE (1 << 3) +#define KVM_X86_DISABLE_EXITS_APERFMPERF (1 << 4) + +/* for KVM_ENABLE_CAP */ +struct kvm_enable_cap { + /* in */ + __u32 cap; + __u32 flags; + __u64 args[4]; + __u8 pad[64]; +}; + +#define KVMIO 0xAE + +/* machine type bits, to be used as argument to KVM_CREATE_VM */ +#define KVM_VM_S390_UCONTROL 1 + +/* on ppc, 0 indicate default, 1 should force HV and 2 PR */ +#define KVM_VM_PPC_HV 1 +#define KVM_VM_PPC_PR 2 + +/* on MIPS, 0 indicates auto, 1 forces VZ ASE, 2 forces trap & emulate */ +#define KVM_VM_MIPS_AUTO 0 +#define KVM_VM_MIPS_VZ 1 +#define KVM_VM_MIPS_TE 2 + +#define KVM_S390_SIE_PAGE_OFFSET 1 + +/* + * On arm64, machine type can be used to request the physical + * address size for the VM. Bits[7-0] are reserved for the guest + * PA size shift (i.e, log2(PA_Size)). For backward compatibility, + * value 0 implies the default IPA size, 40bits. + */ +#define KVM_VM_TYPE_ARM_IPA_SIZE_MASK 0xffULL +#define KVM_VM_TYPE_ARM_IPA_SIZE(x) \ + ((x) & KVM_VM_TYPE_ARM_IPA_SIZE_MASK) +/* + * ioctls for /dev/kvm fds: + */ +#define KVM_GET_API_VERSION _IO(KVMIO, 0x00) +#define KVM_CREATE_VM _IO(KVMIO, 0x01) /* returns a VM fd */ +#define KVM_GET_MSR_INDEX_LIST _IOWR(KVMIO, 0x02, struct kvm_msr_list) + +#define KVM_S390_ENABLE_SIE _IO(KVMIO, 0x06) +/* + * Check if a kvm extension is available. Argument is extension number, + * return is 1 (yes) or 0 (no, sorry). + */ +#define KVM_CHECK_EXTENSION _IO(KVMIO, 0x03) +/* + * Get size for mmap(vcpu_fd) + */ +#define KVM_GET_VCPU_MMAP_SIZE _IO(KVMIO, 0x04) /* in bytes */ +#define KVM_GET_SUPPORTED_CPUID _IOWR(KVMIO, 0x05, struct kvm_cpuid2) +#define KVM_GET_EMULATED_CPUID _IOWR(KVMIO, 0x09, struct kvm_cpuid2) +#define KVM_GET_MSR_FEATURE_INDEX_LIST _IOWR(KVMIO, 0x0a, struct kvm_msr_list) + +/* + * Extension capability list. + */ +#define KVM_CAP_IRQCHIP 0 +#define KVM_CAP_HLT 1 +#define KVM_CAP_MMU_SHADOW_CACHE_CONTROL 2 +#define KVM_CAP_USER_MEMORY 3 +#define KVM_CAP_SET_TSS_ADDR 4 +#define KVM_CAP_VAPIC 6 +#define KVM_CAP_EXT_CPUID 7 +#define KVM_CAP_CLOCKSOURCE 8 +#define KVM_CAP_NR_VCPUS 9 /* returns recommended max vcpus per vm */ +#define KVM_CAP_NR_MEMSLOTS 10 /* returns max memory slots per vm */ +#define KVM_CAP_PIT 11 +#define KVM_CAP_NOP_IO_DELAY 12 +#define KVM_CAP_PV_MMU 13 +#define KVM_CAP_MP_STATE 14 +#define KVM_CAP_COALESCED_MMIO 15 +#define KVM_CAP_SYNC_MMU 16 /* Changes to host mmap are reflected in guest */ +#define KVM_CAP_IOMMU 18 +/* Bug in KVM_SET_USER_MEMORY_REGION fixed: */ +#define KVM_CAP_DESTROY_MEMORY_REGION_WORKS 21 +#define KVM_CAP_USER_NMI 22 +#define KVM_CAP_SET_GUEST_DEBUG 23 +#ifdef __KVM_HAVE_PIT +#define KVM_CAP_REINJECT_CONTROL 24 +#endif +#define KVM_CAP_IRQ_ROUTING 25 +#define KVM_CAP_IRQ_INJECT_STATUS 26 +#define KVM_CAP_ASSIGN_DEV_IRQ 29 +/* Another bug in KVM_SET_USER_MEMORY_REGION fixed: */ +#define KVM_CAP_JOIN_MEMORY_REGIONS_WORKS 30 +#ifdef __KVM_HAVE_MCE +#define KVM_CAP_MCE 31 +#endif +#define KVM_CAP_IRQFD 32 +#ifdef __KVM_HAVE_PIT +#define KVM_CAP_PIT2 33 +#endif +#define KVM_CAP_SET_BOOT_CPU_ID 34 +#ifdef __KVM_HAVE_PIT_STATE2 +#define KVM_CAP_PIT_STATE2 35 +#endif +#define KVM_CAP_IOEVENTFD 36 +#define KVM_CAP_SET_IDENTITY_MAP_ADDR 37 +#ifdef __KVM_HAVE_XEN_HVM +#define KVM_CAP_XEN_HVM 38 +#endif +#define KVM_CAP_ADJUST_CLOCK 39 +#define KVM_CAP_INTERNAL_ERROR_DATA 40 +#ifdef __KVM_HAVE_VCPU_EVENTS +#define KVM_CAP_VCPU_EVENTS 41 +#endif +#define KVM_CAP_S390_PSW 42 +#define KVM_CAP_PPC_SEGSTATE 43 +#define KVM_CAP_HYPERV 44 +#define KVM_CAP_HYPERV_VAPIC 45 +#define KVM_CAP_HYPERV_SPIN 46 +#define KVM_CAP_PCI_SEGMENT 47 +#define KVM_CAP_PPC_PAIRED_SINGLES 48 +#define KVM_CAP_INTR_SHADOW 49 +#ifdef __KVM_HAVE_DEBUGREGS +#define KVM_CAP_DEBUGREGS 50 +#endif +#define KVM_CAP_X86_ROBUST_SINGLESTEP 51 +#define KVM_CAP_PPC_OSI 52 +#define KVM_CAP_PPC_UNSET_IRQ 53 +#define KVM_CAP_ENABLE_CAP 54 +#ifdef __KVM_HAVE_XSAVE +#define KVM_CAP_XSAVE 55 +#endif +#ifdef __KVM_HAVE_XCRS +#define KVM_CAP_XCRS 56 +#endif +#define KVM_CAP_PPC_GET_PVINFO 57 +#define KVM_CAP_PPC_IRQ_LEVEL 58 +#define KVM_CAP_ASYNC_PF 59 +#define KVM_CAP_TSC_CONTROL 60 +#define KVM_CAP_GET_TSC_KHZ 61 +#define KVM_CAP_PPC_BOOKE_SREGS 62 +#define KVM_CAP_SPAPR_TCE 63 +#define KVM_CAP_PPC_SMT 64 +#define KVM_CAP_PPC_RMA 65 +#define KVM_CAP_MAX_VCPUS 66 /* returns max vcpus per vm */ +#define KVM_CAP_PPC_HIOR 67 +#define KVM_CAP_PPC_PAPR 68 +#define KVM_CAP_SW_TLB 69 +#define KVM_CAP_ONE_REG 70 +#define KVM_CAP_S390_GMAP 71 +#define KVM_CAP_TSC_DEADLINE_TIMER 72 +#define KVM_CAP_S390_UCONTROL 73 +#define KVM_CAP_SYNC_REGS 74 +#define KVM_CAP_PCI_2_3 75 +#define KVM_CAP_KVMCLOCK_CTRL 76 +#define KVM_CAP_SIGNAL_MSI 77 +#define KVM_CAP_PPC_GET_SMMU_INFO 78 +#define KVM_CAP_S390_COW 79 +#define KVM_CAP_PPC_ALLOC_HTAB 80 +#define KVM_CAP_READONLY_MEM 81 +#define KVM_CAP_IRQFD_RESAMPLE 82 +#define KVM_CAP_PPC_BOOKE_WATCHDOG 83 +#define KVM_CAP_PPC_HTAB_FD 84 +#define KVM_CAP_S390_CSS_SUPPORT 85 +#define KVM_CAP_PPC_EPR 86 +#define KVM_CAP_ARM_PSCI 87 +#define KVM_CAP_ARM_SET_DEVICE_ADDR 88 +#define KVM_CAP_DEVICE_CTRL 89 +#define KVM_CAP_IRQ_MPIC 90 +#define KVM_CAP_PPC_RTAS 91 +#define KVM_CAP_IRQ_XICS 92 +#define KVM_CAP_ARM_EL1_32BIT 93 +#define KVM_CAP_SPAPR_MULTITCE 94 +#define KVM_CAP_EXT_EMUL_CPUID 95 +#define KVM_CAP_HYPERV_TIME 96 +#define KVM_CAP_IOAPIC_POLARITY_IGNORED 97 +#define KVM_CAP_ENABLE_CAP_VM 98 +#define KVM_CAP_S390_IRQCHIP 99 +#define KVM_CAP_IOEVENTFD_NO_LENGTH 100 +#define KVM_CAP_VM_ATTRIBUTES 101 +#define KVM_CAP_ARM_PSCI_0_2 102 +#define KVM_CAP_PPC_FIXUP_HCALL 103 +#define KVM_CAP_PPC_ENABLE_HCALL 104 +#define KVM_CAP_CHECK_EXTENSION_VM 105 +#define KVM_CAP_S390_USER_SIGP 106 +#define KVM_CAP_S390_VECTOR_REGISTERS 107 +#define KVM_CAP_S390_MEM_OP 108 +#define KVM_CAP_S390_USER_STSI 109 +#define KVM_CAP_S390_SKEYS 110 +#define KVM_CAP_MIPS_FPU 111 +#define KVM_CAP_MIPS_MSA 112 +#define KVM_CAP_S390_INJECT_IRQ 113 +#define KVM_CAP_S390_IRQ_STATE 114 +#define KVM_CAP_PPC_HWRNG 115 +#define KVM_CAP_DISABLE_QUIRKS 116 +#define KVM_CAP_X86_SMM 117 +#define KVM_CAP_MULTI_ADDRESS_SPACE 118 +#define KVM_CAP_GUEST_DEBUG_HW_BPS 119 +#define KVM_CAP_GUEST_DEBUG_HW_WPS 120 +#define KVM_CAP_SPLIT_IRQCHIP 121 +#define KVM_CAP_IOEVENTFD_ANY_LENGTH 122 +#define KVM_CAP_HYPERV_SYNIC 123 +#define KVM_CAP_S390_RI 124 +#define KVM_CAP_SPAPR_TCE_64 125 +#define KVM_CAP_ARM_PMU_V3 126 +#define KVM_CAP_VCPU_ATTRIBUTES 127 +#define KVM_CAP_MAX_VCPU_ID 128 +#define KVM_CAP_X2APIC_API 129 +#define KVM_CAP_S390_USER_INSTR0 130 +#define KVM_CAP_MSI_DEVID 131 +#define KVM_CAP_PPC_HTM 132 +#define KVM_CAP_SPAPR_RESIZE_HPT 133 +#define KVM_CAP_PPC_MMU_RADIX 134 +#define KVM_CAP_PPC_MMU_HASH_V3 135 +#define KVM_CAP_IMMEDIATE_EXIT 136 +#define KVM_CAP_MIPS_VZ 137 +#define KVM_CAP_MIPS_TE 138 +#define KVM_CAP_MIPS_64BIT 139 +#define KVM_CAP_S390_GS 140 +#define KVM_CAP_S390_AIS 141 +#define KVM_CAP_SPAPR_TCE_VFIO 142 +#define KVM_CAP_X86_DISABLE_EXITS 143 +#define KVM_CAP_ARM_USER_IRQ 144 +#define KVM_CAP_S390_CMMA_MIGRATION 145 +#define KVM_CAP_PPC_FWNMI 146 +#define KVM_CAP_PPC_SMT_POSSIBLE 147 +#define KVM_CAP_HYPERV_SYNIC2 148 +#define KVM_CAP_HYPERV_VP_INDEX 149 +#define KVM_CAP_S390_AIS_MIGRATION 150 +#define KVM_CAP_PPC_GET_CPU_CHAR 151 +#define KVM_CAP_S390_BPB 152 +#define KVM_CAP_GET_MSR_FEATURES 153 +#define KVM_CAP_HYPERV_EVENTFD 154 +#define KVM_CAP_HYPERV_TLBFLUSH 155 +#define KVM_CAP_S390_HPAGE_1M 156 +#define KVM_CAP_NESTED_STATE 157 +#define KVM_CAP_ARM_INJECT_SERROR_ESR 158 +#define KVM_CAP_MSR_PLATFORM_INFO 159 +#define KVM_CAP_PPC_NESTED_HV 160 +#define KVM_CAP_HYPERV_SEND_IPI 161 +#define KVM_CAP_COALESCED_PIO 162 +#define KVM_CAP_HYPERV_ENLIGHTENED_VMCS 163 +#define KVM_CAP_EXCEPTION_PAYLOAD 164 +#define KVM_CAP_ARM_VM_IPA_SIZE 165 +#define KVM_CAP_MANUAL_DIRTY_LOG_PROTECT 166 /* Obsolete */ +#define KVM_CAP_HYPERV_CPUID 167 +#define KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 168 +#define KVM_CAP_PPC_IRQ_XIVE 169 +#define KVM_CAP_ARM_SVE 170 +#define KVM_CAP_ARM_PTRAUTH_ADDRESS 171 +#define KVM_CAP_ARM_PTRAUTH_GENERIC 172 +#define KVM_CAP_PMU_EVENT_FILTER 173 +#define KVM_CAP_ARM_IRQ_LINE_LAYOUT_2 174 +#define KVM_CAP_HYPERV_DIRECT_TLBFLUSH 175 +#define KVM_CAP_PPC_GUEST_DEBUG_SSTEP 176 +#define KVM_CAP_ARM_NISV_TO_USER 177 +#define KVM_CAP_ARM_INJECT_EXT_DABT 178 +#define KVM_CAP_S390_VCPU_RESETS 179 +#define KVM_CAP_S390_PROTECTED 180 +#define KVM_CAP_PPC_SECURE_GUEST 181 +#define KVM_CAP_HALT_POLL 182 +#define KVM_CAP_ASYNC_PF_INT 183 +#define KVM_CAP_LAST_CPU 184 +#define KVM_CAP_SMALLER_MAXPHYADDR 185 +#define KVM_CAP_S390_DIAG318 186 +#define KVM_CAP_STEAL_TIME 187 +#define KVM_CAP_X86_USER_SPACE_MSR 188 +#define KVM_CAP_X86_MSR_FILTER 189 +#define KVM_CAP_ENFORCE_PV_FEATURE_CPUID 190 +#define KVM_CAP_SYS_HYPERV_CPUID 191 +#define KVM_CAP_DIRTY_LOG_RING 192 +#define KVM_CAP_X86_BUS_LOCK_EXIT 193 +#define KVM_CAP_PPC_DAWR1 194 +#define KVM_CAP_SET_GUEST_DEBUG2 195 +#define KVM_CAP_SGX_ATTRIBUTE 196 +#define KVM_CAP_VM_COPY_ENC_CONTEXT_FROM 197 +#define KVM_CAP_PTP_KVM 198 +#define KVM_CAP_HYPERV_ENFORCE_CPUID 199 +#define KVM_CAP_SREGS2 200 +#define KVM_CAP_EXIT_HYPERCALL 201 +#define KVM_CAP_PPC_RPT_INVALIDATE 202 +#define KVM_CAP_BINARY_STATS_FD 203 +#define KVM_CAP_EXIT_ON_EMULATION_FAILURE 204 +#define KVM_CAP_ARM_MTE 205 +#define KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM 206 +#define KVM_CAP_VM_GPA_BITS 207 +#define KVM_CAP_XSAVE2 208 +#define KVM_CAP_SYS_ATTRIBUTES 209 +#define KVM_CAP_PPC_AIL_MODE_3 210 +#define KVM_CAP_S390_MEM_OP_EXTENSION 211 +#define KVM_CAP_PMU_CAPABILITY 212 +#define KVM_CAP_DISABLE_QUIRKS2 213 +#define KVM_CAP_VM_TSC_CONTROL 214 +#define KVM_CAP_SYSTEM_EVENT_DATA 215 +#define KVM_CAP_ARM_SYSTEM_SUSPEND 216 +#define KVM_CAP_S390_PROTECTED_DUMP 217 +#define KVM_CAP_X86_TRIPLE_FAULT_EVENT 218 +#define KVM_CAP_X86_NOTIFY_VMEXIT 219 +#define KVM_CAP_VM_DISABLE_NX_HUGE_PAGES 220 +#define KVM_CAP_S390_ZPCI_OP 221 +#define KVM_CAP_S390_CPU_TOPOLOGY 222 +#define KVM_CAP_DIRTY_LOG_RING_ACQ_REL 223 +#define KVM_CAP_S390_PROTECTED_ASYNC_DISABLE 224 +#define KVM_CAP_DIRTY_LOG_RING_WITH_BITMAP 225 +#define KVM_CAP_PMU_EVENT_MASKED_EVENTS 226 +#define KVM_CAP_COUNTER_OFFSET 227 +#define KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE 228 +#define KVM_CAP_ARM_SUPPORTED_BLOCK_SIZES 229 +#define KVM_CAP_ARM_SUPPORTED_REG_MASK_RANGES 230 +#define KVM_CAP_USER_MEMORY2 231 +#define KVM_CAP_MEMORY_FAULT_INFO 232 +#define KVM_CAP_MEMORY_ATTRIBUTES 233 +#define KVM_CAP_GUEST_MEMFD 234 +#define KVM_CAP_VM_TYPES 235 +#define KVM_CAP_PRE_FAULT_MEMORY 236 +#define KVM_CAP_X86_APIC_BUS_CYCLES_NS 237 +#define KVM_CAP_X86_GUEST_MODE 238 +#define KVM_CAP_ARM_WRITABLE_IMP_ID_REGS 239 +#define KVM_CAP_ARM_EL2 240 +#define KVM_CAP_ARM_EL2_E2H0 241 +#define KVM_CAP_RISCV_MP_STATE_RESET 242 +#define KVM_CAP_ARM_CACHEABLE_PFNMAP_SUPPORTED 243 +#define KVM_CAP_GUEST_MEMFD_FLAGS 244 + +struct kvm_irq_routing_irqchip { + __u32 irqchip; + __u32 pin; +}; + +struct kvm_irq_routing_msi { + __u32 address_lo; + __u32 address_hi; + __u32 data; + union { + __u32 pad; + __u32 devid; + }; +}; + +struct kvm_irq_routing_s390_adapter { + __u64 ind_addr; + __u64 summary_addr; + __u64 ind_offset; + __u32 summary_offset; + __u32 adapter_id; +}; + +struct kvm_irq_routing_hv_sint { + __u32 vcpu; + __u32 sint; +}; + +struct kvm_irq_routing_xen_evtchn { + __u32 port; + __u32 vcpu; + __u32 priority; +}; + +#define KVM_IRQ_ROUTING_XEN_EVTCHN_PRIO_2LEVEL ((__u32)(-1)) + +/* gsi routing entry types */ +#define KVM_IRQ_ROUTING_IRQCHIP 1 +#define KVM_IRQ_ROUTING_MSI 2 +#define KVM_IRQ_ROUTING_S390_ADAPTER 3 +#define KVM_IRQ_ROUTING_HV_SINT 4 +#define KVM_IRQ_ROUTING_XEN_EVTCHN 5 + +struct kvm_irq_routing_entry { + __u32 gsi; + __u32 type; + __u32 flags; + __u32 pad; + union { + struct kvm_irq_routing_irqchip irqchip; + struct kvm_irq_routing_msi msi; + struct kvm_irq_routing_s390_adapter adapter; + struct kvm_irq_routing_hv_sint hv_sint; + struct kvm_irq_routing_xen_evtchn xen_evtchn; + __u32 pad[8]; + } u; +}; + +struct kvm_irq_routing { + __u32 nr; + __u32 flags; + struct kvm_irq_routing_entry entries[]; +}; + +#define KVM_IRQFD_FLAG_DEASSIGN (1 << 0) +/* + * Available with KVM_CAP_IRQFD_RESAMPLE + * + * KVM_IRQFD_FLAG_RESAMPLE indicates resamplefd is valid and specifies + * the irqfd to operate in resampling mode for level triggered interrupt + * emulation. See Documentation/virt/kvm/api.rst. + */ +#define KVM_IRQFD_FLAG_RESAMPLE (1 << 1) + +struct kvm_irqfd { + __u32 fd; + __u32 gsi; + __u32 flags; + __u32 resamplefd; + __u8 pad[16]; +}; + +/* For KVM_CAP_ADJUST_CLOCK */ + +/* Do not use 1, KVM_CHECK_EXTENSION returned it before we had flags. */ +#define KVM_CLOCK_TSC_STABLE 2 +#define KVM_CLOCK_REALTIME (1 << 2) +#define KVM_CLOCK_HOST_TSC (1 << 3) + +struct kvm_clock_data { + __u64 clock; + __u32 flags; + __u32 pad0; + __u64 realtime; + __u64 host_tsc; + __u32 pad[4]; +}; + +/* For KVM_CAP_SW_TLB */ + +#define KVM_MMU_FSL_BOOKE_NOHV 0 +#define KVM_MMU_FSL_BOOKE_HV 1 + +struct kvm_config_tlb { + __u64 params; + __u64 array; + __u32 mmu_type; + __u32 array_len; +}; + +struct kvm_dirty_tlb { + __u64 bitmap; + __u32 num_dirty; +}; + +/* Available with KVM_CAP_ONE_REG */ + +#define KVM_REG_ARCH_MASK 0xff00000000000000ULL +#define KVM_REG_GENERIC 0x0000000000000000ULL + +/* + * Architecture specific registers are to be defined in arch headers and + * ORed with the arch identifier. + */ +#define KVM_REG_PPC 0x1000000000000000ULL +#define KVM_REG_X86 0x2000000000000000ULL +#define KVM_REG_IA64 0x3000000000000000ULL +#define KVM_REG_ARM 0x4000000000000000ULL +#define KVM_REG_S390 0x5000000000000000ULL +#define KVM_REG_ARM64 0x6000000000000000ULL +#define KVM_REG_MIPS 0x7000000000000000ULL +#define KVM_REG_RISCV 0x8000000000000000ULL +#define KVM_REG_LOONGARCH 0x9000000000000000ULL + +#define KVM_REG_SIZE_SHIFT 52 +#define KVM_REG_SIZE_MASK 0x00f0000000000000ULL + +#define KVM_REG_SIZE(id) \ + (1U << (((id) & KVM_REG_SIZE_MASK) >> KVM_REG_SIZE_SHIFT)) + +#define KVM_REG_SIZE_U8 0x0000000000000000ULL +#define KVM_REG_SIZE_U16 0x0010000000000000ULL +#define KVM_REG_SIZE_U32 0x0020000000000000ULL +#define KVM_REG_SIZE_U64 0x0030000000000000ULL +#define KVM_REG_SIZE_U128 0x0040000000000000ULL +#define KVM_REG_SIZE_U256 0x0050000000000000ULL +#define KVM_REG_SIZE_U512 0x0060000000000000ULL +#define KVM_REG_SIZE_U1024 0x0070000000000000ULL +#define KVM_REG_SIZE_U2048 0x0080000000000000ULL + +struct kvm_reg_list { + __u64 n; /* number of regs */ + __u64 reg[]; +}; + +struct kvm_one_reg { + __u64 id; + __u64 addr; +}; + +#define KVM_MSI_VALID_DEVID (1U << 0) +struct kvm_msi { + __u32 address_lo; + __u32 address_hi; + __u32 data; + __u32 flags; + __u32 devid; + __u8 pad[12]; +}; + +struct kvm_arm_device_addr { + __u64 id; + __u64 addr; +}; + +/* + * Device control API, available with KVM_CAP_DEVICE_CTRL + */ +#define KVM_CREATE_DEVICE_TEST 1 + +struct kvm_create_device { + __u32 type; /* in: KVM_DEV_TYPE_xxx */ + __u32 fd; /* out: device handle */ + __u32 flags; /* in: KVM_CREATE_DEVICE_xxx */ +}; + +struct kvm_device_attr { + __u32 flags; /* no flags currently defined */ + __u32 group; /* device-defined */ + __u64 attr; /* group-defined */ + __u64 addr; /* userspace address of attr data */ +}; + +#define KVM_DEV_VFIO_FILE 1 + +#define KVM_DEV_VFIO_FILE_ADD 1 +#define KVM_DEV_VFIO_FILE_DEL 2 + +/* KVM_DEV_VFIO_GROUP aliases are for compile time uapi compatibility */ +#define KVM_DEV_VFIO_GROUP KVM_DEV_VFIO_FILE + +#define KVM_DEV_VFIO_GROUP_ADD KVM_DEV_VFIO_FILE_ADD +#define KVM_DEV_VFIO_GROUP_DEL KVM_DEV_VFIO_FILE_DEL +#define KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE 3 + +enum kvm_device_type { + KVM_DEV_TYPE_FSL_MPIC_20 = 1, +#define KVM_DEV_TYPE_FSL_MPIC_20 KVM_DEV_TYPE_FSL_MPIC_20 + KVM_DEV_TYPE_FSL_MPIC_42, +#define KVM_DEV_TYPE_FSL_MPIC_42 KVM_DEV_TYPE_FSL_MPIC_42 + KVM_DEV_TYPE_XICS, +#define KVM_DEV_TYPE_XICS KVM_DEV_TYPE_XICS + KVM_DEV_TYPE_VFIO, +#define KVM_DEV_TYPE_VFIO KVM_DEV_TYPE_VFIO + KVM_DEV_TYPE_ARM_VGIC_V2, +#define KVM_DEV_TYPE_ARM_VGIC_V2 KVM_DEV_TYPE_ARM_VGIC_V2 + KVM_DEV_TYPE_FLIC, +#define KVM_DEV_TYPE_FLIC KVM_DEV_TYPE_FLIC + KVM_DEV_TYPE_ARM_VGIC_V3, +#define KVM_DEV_TYPE_ARM_VGIC_V3 KVM_DEV_TYPE_ARM_VGIC_V3 + KVM_DEV_TYPE_ARM_VGIC_ITS, +#define KVM_DEV_TYPE_ARM_VGIC_ITS KVM_DEV_TYPE_ARM_VGIC_ITS + KVM_DEV_TYPE_XIVE, +#define KVM_DEV_TYPE_XIVE KVM_DEV_TYPE_XIVE + KVM_DEV_TYPE_ARM_PV_TIME, +#define KVM_DEV_TYPE_ARM_PV_TIME KVM_DEV_TYPE_ARM_PV_TIME + KVM_DEV_TYPE_RISCV_AIA, +#define KVM_DEV_TYPE_RISCV_AIA KVM_DEV_TYPE_RISCV_AIA + KVM_DEV_TYPE_LOONGARCH_IPI, +#define KVM_DEV_TYPE_LOONGARCH_IPI KVM_DEV_TYPE_LOONGARCH_IPI + KVM_DEV_TYPE_LOONGARCH_EIOINTC, +#define KVM_DEV_TYPE_LOONGARCH_EIOINTC KVM_DEV_TYPE_LOONGARCH_EIOINTC + KVM_DEV_TYPE_LOONGARCH_PCHPIC, +#define KVM_DEV_TYPE_LOONGARCH_PCHPIC KVM_DEV_TYPE_LOONGARCH_PCHPIC + + KVM_DEV_TYPE_MAX, + +}; + +struct kvm_vfio_spapr_tce { + __s32 groupfd; + __s32 tablefd; +}; + +/* + * KVM_CREATE_VCPU receives as a parameter the vcpu slot, and returns + * a vcpu fd. + */ +#define KVM_CREATE_VCPU _IO(KVMIO, 0x41) +#define KVM_GET_DIRTY_LOG _IOW(KVMIO, 0x42, struct kvm_dirty_log) +#define KVM_SET_NR_MMU_PAGES _IO(KVMIO, 0x44) +#define KVM_GET_NR_MMU_PAGES _IO(KVMIO, 0x45) /* deprecated */ +#define KVM_SET_USER_MEMORY_REGION _IOW(KVMIO, 0x46, \ + struct kvm_userspace_memory_region) +#define KVM_SET_TSS_ADDR _IO(KVMIO, 0x47) +#define KVM_SET_IDENTITY_MAP_ADDR _IOW(KVMIO, 0x48, __u64) +#define KVM_SET_USER_MEMORY_REGION2 _IOW(KVMIO, 0x49, \ + struct kvm_userspace_memory_region2) + +/* enable ucontrol for s390 */ +#define KVM_S390_UCAS_MAP _IOW(KVMIO, 0x50, struct kvm_s390_ucas_mapping) +#define KVM_S390_UCAS_UNMAP _IOW(KVMIO, 0x51, struct kvm_s390_ucas_mapping) +#define KVM_S390_VCPU_FAULT _IOW(KVMIO, 0x52, unsigned long) + +/* Device model IOC */ +#define KVM_CREATE_IRQCHIP _IO(KVMIO, 0x60) +#define KVM_IRQ_LINE _IOW(KVMIO, 0x61, struct kvm_irq_level) +#define KVM_GET_IRQCHIP _IOWR(KVMIO, 0x62, struct kvm_irqchip) +#define KVM_SET_IRQCHIP _IOR(KVMIO, 0x63, struct kvm_irqchip) +#define KVM_CREATE_PIT _IO(KVMIO, 0x64) +#define KVM_GET_PIT _IOWR(KVMIO, 0x65, struct kvm_pit_state) +#define KVM_SET_PIT _IOR(KVMIO, 0x66, struct kvm_pit_state) +#define KVM_IRQ_LINE_STATUS _IOWR(KVMIO, 0x67, struct kvm_irq_level) +#define KVM_REGISTER_COALESCED_MMIO \ + _IOW(KVMIO, 0x67, struct kvm_coalesced_mmio_zone) +#define KVM_UNREGISTER_COALESCED_MMIO \ + _IOW(KVMIO, 0x68, struct kvm_coalesced_mmio_zone) +#define KVM_SET_GSI_ROUTING _IOW(KVMIO, 0x6a, struct kvm_irq_routing) +#define KVM_REINJECT_CONTROL _IO(KVMIO, 0x71) +#define KVM_IRQFD _IOW(KVMIO, 0x76, struct kvm_irqfd) +#define KVM_CREATE_PIT2 _IOW(KVMIO, 0x77, struct kvm_pit_config) +#define KVM_SET_BOOT_CPU_ID _IO(KVMIO, 0x78) +#define KVM_IOEVENTFD _IOW(KVMIO, 0x79, struct kvm_ioeventfd) +#define KVM_XEN_HVM_CONFIG _IOW(KVMIO, 0x7a, struct kvm_xen_hvm_config) +#define KVM_SET_CLOCK _IOW(KVMIO, 0x7b, struct kvm_clock_data) +#define KVM_GET_CLOCK _IOR(KVMIO, 0x7c, struct kvm_clock_data) +/* Available with KVM_CAP_PIT_STATE2 */ +#define KVM_GET_PIT2 _IOR(KVMIO, 0x9f, struct kvm_pit_state2) +#define KVM_SET_PIT2 _IOW(KVMIO, 0xa0, struct kvm_pit_state2) +/* Available with KVM_CAP_PPC_GET_PVINFO */ +#define KVM_PPC_GET_PVINFO _IOW(KVMIO, 0xa1, struct kvm_ppc_pvinfo) +/* Available with KVM_CAP_TSC_CONTROL for a vCPU, or with +* KVM_CAP_VM_TSC_CONTROL to set defaults for a VM */ +#define KVM_SET_TSC_KHZ _IO(KVMIO, 0xa2) +#define KVM_GET_TSC_KHZ _IO(KVMIO, 0xa3) +/* Available with KVM_CAP_SIGNAL_MSI */ +#define KVM_SIGNAL_MSI _IOW(KVMIO, 0xa5, struct kvm_msi) +/* Available with KVM_CAP_PPC_GET_SMMU_INFO */ +#define KVM_PPC_GET_SMMU_INFO _IOR(KVMIO, 0xa6, struct kvm_ppc_smmu_info) +/* Available with KVM_CAP_PPC_ALLOC_HTAB */ +#define KVM_PPC_ALLOCATE_HTAB _IOWR(KVMIO, 0xa7, __u32) +#define KVM_CREATE_SPAPR_TCE _IOW(KVMIO, 0xa8, struct kvm_create_spapr_tce) +#define KVM_CREATE_SPAPR_TCE_64 _IOW(KVMIO, 0xa8, \ + struct kvm_create_spapr_tce_64) +/* Available with KVM_CAP_RMA */ +#define KVM_ALLOCATE_RMA _IOR(KVMIO, 0xa9, struct kvm_allocate_rma) +/* Available with KVM_CAP_PPC_HTAB_FD */ +#define KVM_PPC_GET_HTAB_FD _IOW(KVMIO, 0xaa, struct kvm_get_htab_fd) +/* Available with KVM_CAP_ARM_SET_DEVICE_ADDR */ +#define KVM_ARM_SET_DEVICE_ADDR _IOW(KVMIO, 0xab, struct kvm_arm_device_addr) +/* Available with KVM_CAP_PPC_RTAS */ +#define KVM_PPC_RTAS_DEFINE_TOKEN _IOW(KVMIO, 0xac, struct kvm_rtas_token_args) +/* Available with KVM_CAP_SPAPR_RESIZE_HPT */ +#define KVM_PPC_RESIZE_HPT_PREPARE _IOR(KVMIO, 0xad, struct kvm_ppc_resize_hpt) +#define KVM_PPC_RESIZE_HPT_COMMIT _IOR(KVMIO, 0xae, struct kvm_ppc_resize_hpt) +/* Available with KVM_CAP_PPC_MMU_RADIX or KVM_CAP_PPC_MMU_HASH_V3 */ +#define KVM_PPC_CONFIGURE_V3_MMU _IOW(KVMIO, 0xaf, struct kvm_ppc_mmuv3_cfg) +/* Available with KVM_CAP_PPC_MMU_RADIX */ +#define KVM_PPC_GET_RMMU_INFO _IOW(KVMIO, 0xb0, struct kvm_ppc_rmmu_info) +/* Available with KVM_CAP_PPC_GET_CPU_CHAR */ +#define KVM_PPC_GET_CPU_CHAR _IOR(KVMIO, 0xb1, struct kvm_ppc_cpu_char) +/* Available with KVM_CAP_PMU_EVENT_FILTER */ +#define KVM_SET_PMU_EVENT_FILTER _IOW(KVMIO, 0xb2, struct kvm_pmu_event_filter) +#define KVM_PPC_SVM_OFF _IO(KVMIO, 0xb3) +#define KVM_ARM_MTE_COPY_TAGS _IOR(KVMIO, 0xb4, struct kvm_arm_copy_mte_tags) +/* Available with KVM_CAP_COUNTER_OFFSET */ +#define KVM_ARM_SET_COUNTER_OFFSET _IOW(KVMIO, 0xb5, struct kvm_arm_counter_offset) +#define KVM_ARM_GET_REG_WRITABLE_MASKS _IOR(KVMIO, 0xb6, struct reg_mask_range) + +/* ioctl for vm fd */ +#define KVM_CREATE_DEVICE _IOWR(KVMIO, 0xe0, struct kvm_create_device) + +/* ioctls for fds returned by KVM_CREATE_DEVICE */ +#define KVM_SET_DEVICE_ATTR _IOW(KVMIO, 0xe1, struct kvm_device_attr) +#define KVM_GET_DEVICE_ATTR _IOW(KVMIO, 0xe2, struct kvm_device_attr) +#define KVM_HAS_DEVICE_ATTR _IOW(KVMIO, 0xe3, struct kvm_device_attr) + +/* + * ioctls for vcpu fds + */ +#define KVM_RUN _IO(KVMIO, 0x80) +#define KVM_GET_REGS _IOR(KVMIO, 0x81, struct kvm_regs) +#define KVM_SET_REGS _IOW(KVMIO, 0x82, struct kvm_regs) +#define KVM_GET_SREGS _IOR(KVMIO, 0x83, struct kvm_sregs) +#define KVM_SET_SREGS _IOW(KVMIO, 0x84, struct kvm_sregs) +#define KVM_TRANSLATE _IOWR(KVMIO, 0x85, struct kvm_translation) +#define KVM_INTERRUPT _IOW(KVMIO, 0x86, struct kvm_interrupt) +#define KVM_GET_MSRS _IOWR(KVMIO, 0x88, struct kvm_msrs) +#define KVM_SET_MSRS _IOW(KVMIO, 0x89, struct kvm_msrs) +#define KVM_SET_CPUID _IOW(KVMIO, 0x8a, struct kvm_cpuid) +#define KVM_SET_SIGNAL_MASK _IOW(KVMIO, 0x8b, struct kvm_signal_mask) +#define KVM_GET_FPU _IOR(KVMIO, 0x8c, struct kvm_fpu) +#define KVM_SET_FPU _IOW(KVMIO, 0x8d, struct kvm_fpu) +#define KVM_GET_LAPIC _IOR(KVMIO, 0x8e, struct kvm_lapic_state) +#define KVM_SET_LAPIC _IOW(KVMIO, 0x8f, struct kvm_lapic_state) +#define KVM_SET_CPUID2 _IOW(KVMIO, 0x90, struct kvm_cpuid2) +#define KVM_GET_CPUID2 _IOWR(KVMIO, 0x91, struct kvm_cpuid2) +/* Available with KVM_CAP_VAPIC */ +#define KVM_TPR_ACCESS_REPORTING _IOWR(KVMIO, 0x92, struct kvm_tpr_access_ctl) +/* Available with KVM_CAP_VAPIC */ +#define KVM_SET_VAPIC_ADDR _IOW(KVMIO, 0x93, struct kvm_vapic_addr) +/* valid for virtual machine (for floating interrupt)_and_ vcpu */ +#define KVM_S390_INTERRUPT _IOW(KVMIO, 0x94, struct kvm_s390_interrupt) +/* store status for s390 */ +#define KVM_S390_STORE_STATUS_NOADDR (-1ul) +#define KVM_S390_STORE_STATUS_PREFIXED (-2ul) +#define KVM_S390_STORE_STATUS _IOW(KVMIO, 0x95, unsigned long) +/* initial ipl psw for s390 */ +#define KVM_S390_SET_INITIAL_PSW _IOW(KVMIO, 0x96, struct kvm_s390_psw) +/* initial reset for s390 */ +#define KVM_S390_INITIAL_RESET _IO(KVMIO, 0x97) +#define KVM_GET_MP_STATE _IOR(KVMIO, 0x98, struct kvm_mp_state) +#define KVM_SET_MP_STATE _IOW(KVMIO, 0x99, struct kvm_mp_state) +/* Available with KVM_CAP_USER_NMI */ +#define KVM_NMI _IO(KVMIO, 0x9a) +/* Available with KVM_CAP_SET_GUEST_DEBUG */ +#define KVM_SET_GUEST_DEBUG _IOW(KVMIO, 0x9b, struct kvm_guest_debug) +/* MCE for x86 */ +#define KVM_X86_SETUP_MCE _IOW(KVMIO, 0x9c, __u64) +#define KVM_X86_GET_MCE_CAP_SUPPORTED _IOR(KVMIO, 0x9d, __u64) +#define KVM_X86_SET_MCE _IOW(KVMIO, 0x9e, struct kvm_x86_mce) +/* Available with KVM_CAP_VCPU_EVENTS */ +#define KVM_GET_VCPU_EVENTS _IOR(KVMIO, 0x9f, struct kvm_vcpu_events) +#define KVM_SET_VCPU_EVENTS _IOW(KVMIO, 0xa0, struct kvm_vcpu_events) +/* Available with KVM_CAP_DEBUGREGS */ +#define KVM_GET_DEBUGREGS _IOR(KVMIO, 0xa1, struct kvm_debugregs) +#define KVM_SET_DEBUGREGS _IOW(KVMIO, 0xa2, struct kvm_debugregs) +/* + * vcpu version available with KVM_CAP_ENABLE_CAP + * vm version available with KVM_CAP_ENABLE_CAP_VM + */ +#define KVM_ENABLE_CAP _IOW(KVMIO, 0xa3, struct kvm_enable_cap) +/* Available with KVM_CAP_XSAVE */ +#define KVM_GET_XSAVE _IOR(KVMIO, 0xa4, struct kvm_xsave) +#define KVM_SET_XSAVE _IOW(KVMIO, 0xa5, struct kvm_xsave) +/* Available with KVM_CAP_XCRS */ +#define KVM_GET_XCRS _IOR(KVMIO, 0xa6, struct kvm_xcrs) +#define KVM_SET_XCRS _IOW(KVMIO, 0xa7, struct kvm_xcrs) +/* Available with KVM_CAP_SW_TLB */ +#define KVM_DIRTY_TLB _IOW(KVMIO, 0xaa, struct kvm_dirty_tlb) +/* Available with KVM_CAP_ONE_REG */ +#define KVM_GET_ONE_REG _IOW(KVMIO, 0xab, struct kvm_one_reg) +#define KVM_SET_ONE_REG _IOW(KVMIO, 0xac, struct kvm_one_reg) +/* VM is being stopped by host */ +#define KVM_KVMCLOCK_CTRL _IO(KVMIO, 0xad) +#define KVM_ARM_VCPU_INIT _IOW(KVMIO, 0xae, struct kvm_vcpu_init) +#define KVM_ARM_PREFERRED_TARGET _IOR(KVMIO, 0xaf, struct kvm_vcpu_init) +#define KVM_GET_REG_LIST _IOWR(KVMIO, 0xb0, struct kvm_reg_list) +/* Available with KVM_CAP_S390_MEM_OP */ +#define KVM_S390_MEM_OP _IOW(KVMIO, 0xb1, struct kvm_s390_mem_op) +/* Available with KVM_CAP_S390_SKEYS */ +#define KVM_S390_GET_SKEYS _IOW(KVMIO, 0xb2, struct kvm_s390_skeys) +#define KVM_S390_SET_SKEYS _IOW(KVMIO, 0xb3, struct kvm_s390_skeys) +/* Available with KVM_CAP_S390_INJECT_IRQ */ +#define KVM_S390_IRQ _IOW(KVMIO, 0xb4, struct kvm_s390_irq) +/* Available with KVM_CAP_S390_IRQ_STATE */ +#define KVM_S390_SET_IRQ_STATE _IOW(KVMIO, 0xb5, struct kvm_s390_irq_state) +#define KVM_S390_GET_IRQ_STATE _IOW(KVMIO, 0xb6, struct kvm_s390_irq_state) +/* Available with KVM_CAP_X86_SMM */ +#define KVM_SMI _IO(KVMIO, 0xb7) +/* Available with KVM_CAP_S390_CMMA_MIGRATION */ +#define KVM_S390_GET_CMMA_BITS _IOWR(KVMIO, 0xb8, struct kvm_s390_cmma_log) +#define KVM_S390_SET_CMMA_BITS _IOW(KVMIO, 0xb9, struct kvm_s390_cmma_log) +/* Memory Encryption Commands */ +#define KVM_MEMORY_ENCRYPT_OP _IOWR(KVMIO, 0xba, unsigned long) + +struct kvm_enc_region { + __u64 addr; + __u64 size; +}; + +#define KVM_MEMORY_ENCRYPT_REG_REGION _IOR(KVMIO, 0xbb, struct kvm_enc_region) +#define KVM_MEMORY_ENCRYPT_UNREG_REGION _IOR(KVMIO, 0xbc, struct kvm_enc_region) + +/* Available with KVM_CAP_HYPERV_EVENTFD */ +#define KVM_HYPERV_EVENTFD _IOW(KVMIO, 0xbd, struct kvm_hyperv_eventfd) + +/* Available with KVM_CAP_NESTED_STATE */ +#define KVM_GET_NESTED_STATE _IOWR(KVMIO, 0xbe, struct kvm_nested_state) +#define KVM_SET_NESTED_STATE _IOW(KVMIO, 0xbf, struct kvm_nested_state) + +/* Available with KVM_CAP_MANUAL_DIRTY_LOG_PROTECT_2 */ +#define KVM_CLEAR_DIRTY_LOG _IOWR(KVMIO, 0xc0, struct kvm_clear_dirty_log) + +/* Available with KVM_CAP_HYPERV_CPUID (vcpu) / KVM_CAP_SYS_HYPERV_CPUID (system) */ +#define KVM_GET_SUPPORTED_HV_CPUID _IOWR(KVMIO, 0xc1, struct kvm_cpuid2) + +/* Available with KVM_CAP_ARM_SVE */ +#define KVM_ARM_VCPU_FINALIZE _IOW(KVMIO, 0xc2, int) + +/* Available with KVM_CAP_S390_VCPU_RESETS */ +#define KVM_S390_NORMAL_RESET _IO(KVMIO, 0xc3) +#define KVM_S390_CLEAR_RESET _IO(KVMIO, 0xc4) + +/* Available with KVM_CAP_S390_PROTECTED */ +#define KVM_S390_PV_COMMAND _IOWR(KVMIO, 0xc5, struct kvm_pv_cmd) + +/* Available with KVM_CAP_X86_MSR_FILTER */ +#define KVM_X86_SET_MSR_FILTER _IOW(KVMIO, 0xc6, struct kvm_msr_filter) + +/* Available with KVM_CAP_DIRTY_LOG_RING */ +#define KVM_RESET_DIRTY_RINGS _IO(KVMIO, 0xc7) + +/* Per-VM Xen attributes */ +#define KVM_XEN_HVM_GET_ATTR _IOWR(KVMIO, 0xc8, struct kvm_xen_hvm_attr) +#define KVM_XEN_HVM_SET_ATTR _IOW(KVMIO, 0xc9, struct kvm_xen_hvm_attr) + +/* Per-vCPU Xen attributes */ +#define KVM_XEN_VCPU_GET_ATTR _IOWR(KVMIO, 0xca, struct kvm_xen_vcpu_attr) +#define KVM_XEN_VCPU_SET_ATTR _IOW(KVMIO, 0xcb, struct kvm_xen_vcpu_attr) + +/* Available with KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_EVTCHN_SEND */ +#define KVM_XEN_HVM_EVTCHN_SEND _IOW(KVMIO, 0xd0, struct kvm_irq_routing_xen_evtchn) + +#define KVM_GET_SREGS2 _IOR(KVMIO, 0xcc, struct kvm_sregs2) +#define KVM_SET_SREGS2 _IOW(KVMIO, 0xcd, struct kvm_sregs2) + +#define KVM_DIRTY_LOG_MANUAL_PROTECT_ENABLE (1 << 0) +#define KVM_DIRTY_LOG_INITIALLY_SET (1 << 1) + +/* + * Arch needs to define the macro after implementing the dirty ring + * feature. KVM_DIRTY_LOG_PAGE_OFFSET should be defined as the + * starting page offset of the dirty ring structures. + */ +#ifndef KVM_DIRTY_LOG_PAGE_OFFSET +#define KVM_DIRTY_LOG_PAGE_OFFSET 0 +#endif + +/* + * KVM dirty GFN flags, defined as: + * + * |---------------+---------------+--------------| + * | bit 1 (reset) | bit 0 (dirty) | Status | + * |---------------+---------------+--------------| + * | 0 | 0 | Invalid GFN | + * | 0 | 1 | Dirty GFN | + * | 1 | X | GFN to reset | + * |---------------+---------------+--------------| + * + * Lifecycle of a dirty GFN goes like: + * + * dirtied harvested reset + * 00 -----------> 01 -------------> 1X -------+ + * ^ | + * | | + * +------------------------------------------+ + * + * The userspace program is only responsible for the 01->1X state + * conversion after harvesting an entry. Also, it must not skip any + * dirty bits, so that dirty bits are always harvested in sequence. + */ +#define KVM_DIRTY_GFN_F_DIRTY _BITUL(0) +#define KVM_DIRTY_GFN_F_RESET _BITUL(1) +#define KVM_DIRTY_GFN_F_MASK 0x3 + +/* + * KVM dirty rings should be mapped at KVM_DIRTY_LOG_PAGE_OFFSET of + * per-vcpu mmaped regions as an array of struct kvm_dirty_gfn. The + * size of the gfn buffer is decided by the first argument when + * enabling KVM_CAP_DIRTY_LOG_RING. + */ +struct kvm_dirty_gfn { + __u32 flags; + __u32 slot; + __u64 offset; +}; + +#define KVM_BUS_LOCK_DETECTION_OFF (1 << 0) +#define KVM_BUS_LOCK_DETECTION_EXIT (1 << 1) + +#define KVM_PMU_CAP_DISABLE (1 << 0) + +/** + * struct kvm_stats_header - Header of per vm/vcpu binary statistics data. + * @flags: Some extra information for header, always 0 for now. + * @name_size: The size in bytes of the memory which contains statistics + * name string including trailing '\0'. The memory is allocated + * at the send of statistics descriptor. + * @num_desc: The number of statistics the vm or vcpu has. + * @id_offset: The offset of the vm/vcpu stats' id string in the file pointed + * by vm/vcpu stats fd. + * @desc_offset: The offset of the vm/vcpu stats' descriptor block in the file + * pointd by vm/vcpu stats fd. + * @data_offset: The offset of the vm/vcpu stats' data block in the file + * pointed by vm/vcpu stats fd. + * + * This is the header userspace needs to read from stats fd before any other + * readings. It is used by userspace to discover all the information about the + * vm/vcpu's binary statistics. + * Userspace reads this header from the start of the vm/vcpu's stats fd. + */ +struct kvm_stats_header { + __u32 flags; + __u32 name_size; + __u32 num_desc; + __u32 id_offset; + __u32 desc_offset; + __u32 data_offset; +}; + +#define KVM_STATS_TYPE_SHIFT 0 +#define KVM_STATS_TYPE_MASK (0xF << KVM_STATS_TYPE_SHIFT) +#define KVM_STATS_TYPE_CUMULATIVE (0x0 << KVM_STATS_TYPE_SHIFT) +#define KVM_STATS_TYPE_INSTANT (0x1 << KVM_STATS_TYPE_SHIFT) +#define KVM_STATS_TYPE_PEAK (0x2 << KVM_STATS_TYPE_SHIFT) +#define KVM_STATS_TYPE_LINEAR_HIST (0x3 << KVM_STATS_TYPE_SHIFT) +#define KVM_STATS_TYPE_LOG_HIST (0x4 << KVM_STATS_TYPE_SHIFT) +#define KVM_STATS_TYPE_MAX KVM_STATS_TYPE_LOG_HIST + +#define KVM_STATS_UNIT_SHIFT 4 +#define KVM_STATS_UNIT_MASK (0xF << KVM_STATS_UNIT_SHIFT) +#define KVM_STATS_UNIT_NONE (0x0 << KVM_STATS_UNIT_SHIFT) +#define KVM_STATS_UNIT_BYTES (0x1 << KVM_STATS_UNIT_SHIFT) +#define KVM_STATS_UNIT_SECONDS (0x2 << KVM_STATS_UNIT_SHIFT) +#define KVM_STATS_UNIT_CYCLES (0x3 << KVM_STATS_UNIT_SHIFT) +#define KVM_STATS_UNIT_BOOLEAN (0x4 << KVM_STATS_UNIT_SHIFT) +#define KVM_STATS_UNIT_MAX KVM_STATS_UNIT_BOOLEAN + +#define KVM_STATS_BASE_SHIFT 8 +#define KVM_STATS_BASE_MASK (0xF << KVM_STATS_BASE_SHIFT) +#define KVM_STATS_BASE_POW10 (0x0 << KVM_STATS_BASE_SHIFT) +#define KVM_STATS_BASE_POW2 (0x1 << KVM_STATS_BASE_SHIFT) +#define KVM_STATS_BASE_MAX KVM_STATS_BASE_POW2 + +/** + * struct kvm_stats_desc - Descriptor of a KVM statistics. + * @flags: Annotations of the stats, like type, unit, etc. + * @exponent: Used together with @flags to determine the unit. + * @size: The number of data items for this stats. + * Every data item is of type __u64. + * @offset: The offset of the stats to the start of stat structure in + * structure kvm or kvm_vcpu. + * @bucket_size: A parameter value used for histogram stats. It is only used + * for linear histogram stats, specifying the size of the bucket; + * @name: The name string for the stats. Its size is indicated by the + * &kvm_stats_header->name_size. + */ +struct kvm_stats_desc { + __u32 flags; + __s16 exponent; + __u16 size; + __u32 offset; + __u32 bucket_size; + char name[]; +}; + +#define KVM_GET_STATS_FD _IO(KVMIO, 0xce) + +/* Available with KVM_CAP_XSAVE2 */ +#define KVM_GET_XSAVE2 _IOR(KVMIO, 0xcf, struct kvm_xsave) + +/* Available with KVM_CAP_S390_PROTECTED_DUMP */ +#define KVM_S390_PV_CPU_COMMAND _IOWR(KVMIO, 0xd0, struct kvm_pv_cmd) + +/* Available with KVM_CAP_X86_NOTIFY_VMEXIT */ +#define KVM_X86_NOTIFY_VMEXIT_ENABLED (1ULL << 0) +#define KVM_X86_NOTIFY_VMEXIT_USER (1ULL << 1) + +/* Available with KVM_CAP_S390_ZPCI_OP */ +#define KVM_S390_ZPCI_OP _IOW(KVMIO, 0xd1, struct kvm_s390_zpci_op) + +/* Available with KVM_CAP_MEMORY_ATTRIBUTES */ +#define KVM_SET_MEMORY_ATTRIBUTES _IOW(KVMIO, 0xd2, struct kvm_memory_attributes) + +struct kvm_memory_attributes { + __u64 address; + __u64 size; + __u64 attributes; + __u64 flags; +}; + +#define KVM_MEMORY_ATTRIBUTE_PRIVATE (1ULL << 3) + +#define KVM_CREATE_GUEST_MEMFD _IOWR(KVMIO, 0xd4, struct kvm_create_guest_memfd) +#define GUEST_MEMFD_FLAG_MMAP (1ULL << 0) +#define GUEST_MEMFD_FLAG_INIT_SHARED (1ULL << 1) + +struct kvm_create_guest_memfd { + __u64 size; + __u64 flags; + __u64 reserved[6]; +}; + +#define KVM_PRE_FAULT_MEMORY _IOWR(KVMIO, 0xd5, struct kvm_pre_fault_memory) + +struct kvm_pre_fault_memory { + __u64 gpa; + __u64 size; + __u64 flags; + __u64 padding[5]; +}; + +#endif /* __LINUX_KVM_H */ diff --git a/tools/include/uapi/linux/memfd.h b/tools/include/uapi/linux/memfd.h new file mode 100644 index 000000000000..01c0324e7733 --- /dev/null +++ b/tools/include/uapi/linux/memfd.h @@ -0,0 +1,39 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _LINUX_MEMFD_H +#define _LINUX_MEMFD_H + +#include <asm-generic/hugetlb_encode.h> + +/* flags for memfd_create(2) (unsigned int) */ +#define MFD_CLOEXEC 0x0001U +#define MFD_ALLOW_SEALING 0x0002U +#define MFD_HUGETLB 0x0004U +/* not executable and sealed to prevent changing to executable. */ +#define MFD_NOEXEC_SEAL 0x0008U +/* executable */ +#define MFD_EXEC 0x0010U + +/* + * Huge page size encoding when MFD_HUGETLB is specified, and a huge page + * size other than the default is desired. See hugetlb_encode.h. + * All known huge page size encodings are provided here. It is the + * responsibility of the application to know which sizes are supported on + * the running system. See mmap(2) man page for details. + */ +#define MFD_HUGE_SHIFT HUGETLB_FLAG_ENCODE_SHIFT +#define MFD_HUGE_MASK HUGETLB_FLAG_ENCODE_MASK + +#define MFD_HUGE_64KB HUGETLB_FLAG_ENCODE_64KB +#define MFD_HUGE_512KB HUGETLB_FLAG_ENCODE_512KB +#define MFD_HUGE_1MB HUGETLB_FLAG_ENCODE_1MB +#define MFD_HUGE_2MB HUGETLB_FLAG_ENCODE_2MB +#define MFD_HUGE_8MB HUGETLB_FLAG_ENCODE_8MB +#define MFD_HUGE_16MB HUGETLB_FLAG_ENCODE_16MB +#define MFD_HUGE_32MB HUGETLB_FLAG_ENCODE_32MB +#define MFD_HUGE_256MB HUGETLB_FLAG_ENCODE_256MB +#define MFD_HUGE_512MB HUGETLB_FLAG_ENCODE_512MB +#define MFD_HUGE_1GB HUGETLB_FLAG_ENCODE_1GB +#define MFD_HUGE_2GB HUGETLB_FLAG_ENCODE_2GB +#define MFD_HUGE_16GB HUGETLB_FLAG_ENCODE_16GB + +#endif /* _LINUX_MEMFD_H */ diff --git a/tools/include/uapi/linux/mman.h b/tools/include/uapi/linux/mman.h new file mode 100644 index 000000000000..e89d00528f2f --- /dev/null +++ b/tools/include/uapi/linux/mman.h @@ -0,0 +1,59 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _UAPI_LINUX_MMAN_H +#define _UAPI_LINUX_MMAN_H + +#include <asm/mman.h> +#include <asm-generic/hugetlb_encode.h> +#include <linux/types.h> + +#define MREMAP_MAYMOVE 1 +#define MREMAP_FIXED 2 +#define MREMAP_DONTUNMAP 4 + +#define OVERCOMMIT_GUESS 0 +#define OVERCOMMIT_ALWAYS 1 +#define OVERCOMMIT_NEVER 2 + +#define MAP_SHARED 0x01 /* Share changes */ +#define MAP_PRIVATE 0x02 /* Changes are private */ +#define MAP_SHARED_VALIDATE 0x03 /* share + validate extension flags */ +#define MAP_DROPPABLE 0x08 /* Zero memory under memory pressure. */ + +/* + * Huge page size encoding when MAP_HUGETLB is specified, and a huge page + * size other than the default is desired. See hugetlb_encode.h. + * All known huge page size encodings are provided here. It is the + * responsibility of the application to know which sizes are supported on + * the running system. See mmap(2) man page for details. + */ +#define MAP_HUGE_SHIFT HUGETLB_FLAG_ENCODE_SHIFT +#define MAP_HUGE_MASK HUGETLB_FLAG_ENCODE_MASK + +#define MAP_HUGE_16KB HUGETLB_FLAG_ENCODE_16KB +#define MAP_HUGE_64KB HUGETLB_FLAG_ENCODE_64KB +#define MAP_HUGE_512KB HUGETLB_FLAG_ENCODE_512KB +#define MAP_HUGE_1MB HUGETLB_FLAG_ENCODE_1MB +#define MAP_HUGE_2MB HUGETLB_FLAG_ENCODE_2MB +#define MAP_HUGE_8MB HUGETLB_FLAG_ENCODE_8MB +#define MAP_HUGE_16MB HUGETLB_FLAG_ENCODE_16MB +#define MAP_HUGE_32MB HUGETLB_FLAG_ENCODE_32MB +#define MAP_HUGE_256MB HUGETLB_FLAG_ENCODE_256MB +#define MAP_HUGE_512MB HUGETLB_FLAG_ENCODE_512MB +#define MAP_HUGE_1GB HUGETLB_FLAG_ENCODE_1GB +#define MAP_HUGE_2GB HUGETLB_FLAG_ENCODE_2GB +#define MAP_HUGE_16GB HUGETLB_FLAG_ENCODE_16GB + +struct cachestat_range { + __u64 off; + __u64 len; +}; + +struct cachestat { + __u64 nr_cache; + __u64 nr_dirty; + __u64 nr_writeback; + __u64 nr_evicted; + __u64 nr_recently_evicted; +}; + +#endif /* _UAPI_LINUX_MMAN_H */ diff --git a/tools/include/uapi/linux/mount.h b/tools/include/uapi/linux/mount.h new file mode 100644 index 000000000000..7fa67c2031a5 --- /dev/null +++ b/tools/include/uapi/linux/mount.h @@ -0,0 +1,235 @@ +#ifndef _UAPI_LINUX_MOUNT_H +#define _UAPI_LINUX_MOUNT_H + +#include <linux/types.h> + +/* + * These are the fs-independent mount-flags: up to 32 flags are supported + * + * Usage of these is restricted within the kernel to core mount(2) code and + * callers of sys_mount() only. Filesystems should be using the SB_* + * equivalent instead. + */ +#define MS_RDONLY 1 /* Mount read-only */ +#define MS_NOSUID 2 /* Ignore suid and sgid bits */ +#define MS_NODEV 4 /* Disallow access to device special files */ +#define MS_NOEXEC 8 /* Disallow program execution */ +#define MS_SYNCHRONOUS 16 /* Writes are synced at once */ +#define MS_REMOUNT 32 /* Alter flags of a mounted FS */ +#define MS_MANDLOCK 64 /* Allow mandatory locks on an FS */ +#define MS_DIRSYNC 128 /* Directory modifications are synchronous */ +#define MS_NOSYMFOLLOW 256 /* Do not follow symlinks */ +#define MS_NOATIME 1024 /* Do not update access times. */ +#define MS_NODIRATIME 2048 /* Do not update directory access times */ +#define MS_BIND 4096 +#define MS_MOVE 8192 +#define MS_REC 16384 +#define MS_VERBOSE 32768 /* War is peace. Verbosity is silence. + MS_VERBOSE is deprecated. */ +#define MS_SILENT 32768 +#define MS_POSIXACL (1<<16) /* VFS does not apply the umask */ +#define MS_UNBINDABLE (1<<17) /* change to unbindable */ +#define MS_PRIVATE (1<<18) /* change to private */ +#define MS_SLAVE (1<<19) /* change to slave */ +#define MS_SHARED (1<<20) /* change to shared */ +#define MS_RELATIME (1<<21) /* Update atime relative to mtime/ctime. */ +#define MS_KERNMOUNT (1<<22) /* this is a kern_mount call */ +#define MS_I_VERSION (1<<23) /* Update inode I_version field */ +#define MS_STRICTATIME (1<<24) /* Always perform atime updates */ +#define MS_LAZYTIME (1<<25) /* Update the on-disk [acm]times lazily */ + +/* These sb flags are internal to the kernel */ +#define MS_SUBMOUNT (1<<26) +#define MS_NOREMOTELOCK (1<<27) +#define MS_NOSEC (1<<28) +#define MS_BORN (1<<29) +#define MS_ACTIVE (1<<30) +#define MS_NOUSER (1<<31) + +/* + * Superblock flags that can be altered by MS_REMOUNT + */ +#define MS_RMT_MASK (MS_RDONLY|MS_SYNCHRONOUS|MS_MANDLOCK|MS_I_VERSION|\ + MS_LAZYTIME) + +/* + * Old magic mount flag and mask + */ +#define MS_MGC_VAL 0xC0ED0000 +#define MS_MGC_MSK 0xffff0000 + +/* + * open_tree() flags. + */ +#define OPEN_TREE_CLONE 1 /* Clone the target tree and attach the clone */ +#define OPEN_TREE_CLOEXEC O_CLOEXEC /* Close the file on execve() */ + +/* + * move_mount() flags. + */ +#define MOVE_MOUNT_F_SYMLINKS 0x00000001 /* Follow symlinks on from path */ +#define MOVE_MOUNT_F_AUTOMOUNTS 0x00000002 /* Follow automounts on from path */ +#define MOVE_MOUNT_F_EMPTY_PATH 0x00000004 /* Empty from path permitted */ +#define MOVE_MOUNT_T_SYMLINKS 0x00000010 /* Follow symlinks on to path */ +#define MOVE_MOUNT_T_AUTOMOUNTS 0x00000020 /* Follow automounts on to path */ +#define MOVE_MOUNT_T_EMPTY_PATH 0x00000040 /* Empty to path permitted */ +#define MOVE_MOUNT_SET_GROUP 0x00000100 /* Set sharing group instead */ +#define MOVE_MOUNT_BENEATH 0x00000200 /* Mount beneath top mount */ +#define MOVE_MOUNT__MASK 0x00000377 + +/* + * fsopen() flags. + */ +#define FSOPEN_CLOEXEC 0x00000001 + +/* + * fspick() flags. + */ +#define FSPICK_CLOEXEC 0x00000001 +#define FSPICK_SYMLINK_NOFOLLOW 0x00000002 +#define FSPICK_NO_AUTOMOUNT 0x00000004 +#define FSPICK_EMPTY_PATH 0x00000008 + +/* + * The type of fsconfig() call made. + */ +enum fsconfig_command { + FSCONFIG_SET_FLAG = 0, /* Set parameter, supplying no value */ + FSCONFIG_SET_STRING = 1, /* Set parameter, supplying a string value */ + FSCONFIG_SET_BINARY = 2, /* Set parameter, supplying a binary blob value */ + FSCONFIG_SET_PATH = 3, /* Set parameter, supplying an object by path */ + FSCONFIG_SET_PATH_EMPTY = 4, /* Set parameter, supplying an object by (empty) path */ + FSCONFIG_SET_FD = 5, /* Set parameter, supplying an object by fd */ + FSCONFIG_CMD_CREATE = 6, /* Create new or reuse existing superblock */ + FSCONFIG_CMD_RECONFIGURE = 7, /* Invoke superblock reconfiguration */ + FSCONFIG_CMD_CREATE_EXCL = 8, /* Create new superblock, fail if reusing existing superblock */ +}; + +/* + * fsmount() flags. + */ +#define FSMOUNT_CLOEXEC 0x00000001 + +/* + * Mount attributes. + */ +#define MOUNT_ATTR_RDONLY 0x00000001 /* Mount read-only */ +#define MOUNT_ATTR_NOSUID 0x00000002 /* Ignore suid and sgid bits */ +#define MOUNT_ATTR_NODEV 0x00000004 /* Disallow access to device special files */ +#define MOUNT_ATTR_NOEXEC 0x00000008 /* Disallow program execution */ +#define MOUNT_ATTR__ATIME 0x00000070 /* Setting on how atime should be updated */ +#define MOUNT_ATTR_RELATIME 0x00000000 /* - Update atime relative to mtime/ctime. */ +#define MOUNT_ATTR_NOATIME 0x00000010 /* - Do not update access times. */ +#define MOUNT_ATTR_STRICTATIME 0x00000020 /* - Always perform atime updates */ +#define MOUNT_ATTR_NODIRATIME 0x00000080 /* Do not update directory access times */ +#define MOUNT_ATTR_IDMAP 0x00100000 /* Idmap mount to @userns_fd in struct mount_attr. */ +#define MOUNT_ATTR_NOSYMFOLLOW 0x00200000 /* Do not follow symlinks */ + +/* + * mount_setattr() + */ +struct mount_attr { + __u64 attr_set; + __u64 attr_clr; + __u64 propagation; + __u64 userns_fd; +}; + +/* List of all mount_attr versions. */ +#define MOUNT_ATTR_SIZE_VER0 32 /* sizeof first published struct */ + + +/* + * Structure for getting mount/superblock/filesystem info with statmount(2). + * + * The interface is similar to statx(2): individual fields or groups can be + * selected with the @mask argument of statmount(). Kernel will set the @mask + * field according to the supported fields. + * + * If string fields are selected, then the caller needs to pass a buffer that + * has space after the fixed part of the structure. Nul terminated strings are + * copied there and offsets relative to @str are stored in the relevant fields. + * If the buffer is too small, then EOVERFLOW is returned. The actually used + * size is returned in @size. + */ +struct statmount { + __u32 size; /* Total size, including strings */ + __u32 mnt_opts; /* [str] Options (comma separated, escaped) */ + __u64 mask; /* What results were written */ + __u32 sb_dev_major; /* Device ID */ + __u32 sb_dev_minor; + __u64 sb_magic; /* ..._SUPER_MAGIC */ + __u32 sb_flags; /* SB_{RDONLY,SYNCHRONOUS,DIRSYNC,LAZYTIME} */ + __u32 fs_type; /* [str] Filesystem type */ + __u64 mnt_id; /* Unique ID of mount */ + __u64 mnt_parent_id; /* Unique ID of parent (for root == mnt_id) */ + __u32 mnt_id_old; /* Reused IDs used in proc/.../mountinfo */ + __u32 mnt_parent_id_old; + __u64 mnt_attr; /* MOUNT_ATTR_... */ + __u64 mnt_propagation; /* MS_{SHARED,SLAVE,PRIVATE,UNBINDABLE} */ + __u64 mnt_peer_group; /* ID of shared peer group */ + __u64 mnt_master; /* Mount receives propagation from this ID */ + __u64 propagate_from; /* Propagation from in current namespace */ + __u32 mnt_root; /* [str] Root of mount relative to root of fs */ + __u32 mnt_point; /* [str] Mountpoint relative to current root */ + __u64 mnt_ns_id; /* ID of the mount namespace */ + __u32 fs_subtype; /* [str] Subtype of fs_type (if any) */ + __u32 sb_source; /* [str] Source string of the mount */ + __u32 opt_num; /* Number of fs options */ + __u32 opt_array; /* [str] Array of nul terminated fs options */ + __u32 opt_sec_num; /* Number of security options */ + __u32 opt_sec_array; /* [str] Array of nul terminated security options */ + __u64 supported_mask; /* Mask flags that this kernel supports */ + __u32 mnt_uidmap_num; /* Number of uid mappings */ + __u32 mnt_uidmap; /* [str] Array of uid mappings (as seen from callers namespace) */ + __u32 mnt_gidmap_num; /* Number of gid mappings */ + __u32 mnt_gidmap; /* [str] Array of gid mappings (as seen from callers namespace) */ + __u64 __spare2[43]; + char str[]; /* Variable size part containing strings */ +}; + +/* + * Structure for passing mount ID and miscellaneous parameters to statmount(2) + * and listmount(2). + * + * For statmount(2) @param represents the request mask. + * For listmount(2) @param represents the last listed mount id (or zero). + */ +struct mnt_id_req { + __u32 size; + __u32 spare; + __u64 mnt_id; + __u64 param; + __u64 mnt_ns_id; +}; + +/* List of all mnt_id_req versions. */ +#define MNT_ID_REQ_SIZE_VER0 24 /* sizeof first published struct */ +#define MNT_ID_REQ_SIZE_VER1 32 /* sizeof second published struct */ + +/* + * @mask bits for statmount(2) + */ +#define STATMOUNT_SB_BASIC 0x00000001U /* Want/got sb_... */ +#define STATMOUNT_MNT_BASIC 0x00000002U /* Want/got mnt_... */ +#define STATMOUNT_PROPAGATE_FROM 0x00000004U /* Want/got propagate_from */ +#define STATMOUNT_MNT_ROOT 0x00000008U /* Want/got mnt_root */ +#define STATMOUNT_MNT_POINT 0x00000010U /* Want/got mnt_point */ +#define STATMOUNT_FS_TYPE 0x00000020U /* Want/got fs_type */ +#define STATMOUNT_MNT_NS_ID 0x00000040U /* Want/got mnt_ns_id */ +#define STATMOUNT_MNT_OPTS 0x00000080U /* Want/got mnt_opts */ +#define STATMOUNT_FS_SUBTYPE 0x00000100U /* Want/got fs_subtype */ +#define STATMOUNT_SB_SOURCE 0x00000200U /* Want/got sb_source */ +#define STATMOUNT_OPT_ARRAY 0x00000400U /* Want/got opt_... */ +#define STATMOUNT_OPT_SEC_ARRAY 0x00000800U /* Want/got opt_sec... */ +#define STATMOUNT_SUPPORTED_MASK 0x00001000U /* Want/got supported mask flags */ +#define STATMOUNT_MNT_UIDMAP 0x00002000U /* Want/got uidmap... */ +#define STATMOUNT_MNT_GIDMAP 0x00004000U /* Want/got gidmap... */ + +/* + * Special @mnt_id values that can be passed to listmount + */ +#define LSMT_ROOT 0xffffffffffffffff /* root mount */ +#define LISTMOUNT_REVERSE (1 << 0) /* List later mounts first */ + +#endif /* _UAPI_LINUX_MOUNT_H */ diff --git a/tools/include/uapi/linux/neighbour.h b/tools/include/uapi/linux/neighbour.h new file mode 100644 index 000000000000..c34a81245f87 --- /dev/null +++ b/tools/include/uapi/linux/neighbour.h @@ -0,0 +1,229 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _UAPI__LINUX_NEIGHBOUR_H +#define _UAPI__LINUX_NEIGHBOUR_H + +#include <linux/types.h> +#include <linux/netlink.h> + +struct ndmsg { + __u8 ndm_family; + __u8 ndm_pad1; + __u16 ndm_pad2; + __s32 ndm_ifindex; + __u16 ndm_state; + __u8 ndm_flags; + __u8 ndm_type; +}; + +enum { + NDA_UNSPEC, + NDA_DST, + NDA_LLADDR, + NDA_CACHEINFO, + NDA_PROBES, + NDA_VLAN, + NDA_PORT, + NDA_VNI, + NDA_IFINDEX, + NDA_MASTER, + NDA_LINK_NETNSID, + NDA_SRC_VNI, + NDA_PROTOCOL, /* Originator of entry */ + NDA_NH_ID, + NDA_FDB_EXT_ATTRS, + NDA_FLAGS_EXT, + NDA_NDM_STATE_MASK, + NDA_NDM_FLAGS_MASK, + __NDA_MAX +}; + +#define NDA_MAX (__NDA_MAX - 1) + +/* + * Neighbor Cache Entry Flags + */ + +#define NTF_USE (1 << 0) +#define NTF_SELF (1 << 1) +#define NTF_MASTER (1 << 2) +#define NTF_PROXY (1 << 3) /* == ATF_PUBL */ +#define NTF_EXT_LEARNED (1 << 4) +#define NTF_OFFLOADED (1 << 5) +#define NTF_STICKY (1 << 6) +#define NTF_ROUTER (1 << 7) +/* Extended flags under NDA_FLAGS_EXT: */ +#define NTF_EXT_MANAGED (1 << 0) +#define NTF_EXT_LOCKED (1 << 1) +#define NTF_EXT_EXT_VALIDATED (1 << 2) + +/* + * Neighbor Cache Entry States. + */ + +#define NUD_INCOMPLETE 0x01 +#define NUD_REACHABLE 0x02 +#define NUD_STALE 0x04 +#define NUD_DELAY 0x08 +#define NUD_PROBE 0x10 +#define NUD_FAILED 0x20 + +/* Dummy states */ +#define NUD_NOARP 0x40 +#define NUD_PERMANENT 0x80 +#define NUD_NONE 0x00 + +/* NUD_NOARP & NUD_PERMANENT are pseudostates, they never change and make no + * address resolution or NUD. + * + * NUD_PERMANENT also cannot be deleted by garbage collectors. This holds true + * for dynamic entries with NTF_EXT_LEARNED flag as well. However, upon carrier + * down event, NUD_PERMANENT entries are not flushed whereas NTF_EXT_LEARNED + * flagged entries explicitly are (which is also consistent with the routing + * subsystem). + * + * When NTF_EXT_LEARNED is set for a bridge fdb entry the different cache entry + * states don't make sense and thus are ignored. Such entries don't age and + * can roam. + * + * NTF_EXT_MANAGED flagged neigbor entries are managed by the kernel on behalf + * of a user space control plane, and automatically refreshed so that (if + * possible) they remain in NUD_REACHABLE state. + * + * NTF_EXT_LOCKED flagged bridge FDB entries are entries generated by the + * bridge in response to a host trying to communicate via a locked bridge port + * with MAB enabled. Their purpose is to notify user space that a host requires + * authentication. + * + * NTF_EXT_EXT_VALIDATED flagged neighbor entries were externally validated by + * a user space control plane. The kernel will not remove or invalidate them, + * but it can probe them and notify user space when they become reachable. + */ + +struct nda_cacheinfo { + __u32 ndm_confirmed; + __u32 ndm_used; + __u32 ndm_updated; + __u32 ndm_refcnt; +}; + +/***************************************************************** + * Neighbour tables specific messages. + * + * To retrieve the neighbour tables send RTM_GETNEIGHTBL with the + * NLM_F_DUMP flag set. Every neighbour table configuration is + * spread over multiple messages to avoid running into message + * size limits on systems with many interfaces. The first message + * in the sequence transports all not device specific data such as + * statistics, configuration, and the default parameter set. + * This message is followed by 0..n messages carrying device + * specific parameter sets. + * Although the ordering should be sufficient, NDTA_NAME can be + * used to identify sequences. The initial message can be identified + * by checking for NDTA_CONFIG. The device specific messages do + * not contain this TLV but have NDTPA_IFINDEX set to the + * corresponding interface index. + * + * To change neighbour table attributes, send RTM_SETNEIGHTBL + * with NDTA_NAME set. Changeable attribute include NDTA_THRESH[1-3], + * NDTA_GC_INTERVAL, and all TLVs in NDTA_PARMS unless marked + * otherwise. Device specific parameter sets can be changed by + * setting NDTPA_IFINDEX to the interface index of the corresponding + * device. + ****/ + +struct ndt_stats { + __u64 ndts_allocs; + __u64 ndts_destroys; + __u64 ndts_hash_grows; + __u64 ndts_res_failed; + __u64 ndts_lookups; + __u64 ndts_hits; + __u64 ndts_rcv_probes_mcast; + __u64 ndts_rcv_probes_ucast; + __u64 ndts_periodic_gc_runs; + __u64 ndts_forced_gc_runs; + __u64 ndts_table_fulls; +}; + +enum { + NDTPA_UNSPEC, + NDTPA_IFINDEX, /* u32, unchangeable */ + NDTPA_REFCNT, /* u32, read-only */ + NDTPA_REACHABLE_TIME, /* u64, read-only, msecs */ + NDTPA_BASE_REACHABLE_TIME, /* u64, msecs */ + NDTPA_RETRANS_TIME, /* u64, msecs */ + NDTPA_GC_STALETIME, /* u64, msecs */ + NDTPA_DELAY_PROBE_TIME, /* u64, msecs */ + NDTPA_QUEUE_LEN, /* u32 */ + NDTPA_APP_PROBES, /* u32 */ + NDTPA_UCAST_PROBES, /* u32 */ + NDTPA_MCAST_PROBES, /* u32 */ + NDTPA_ANYCAST_DELAY, /* u64, msecs */ + NDTPA_PROXY_DELAY, /* u64, msecs */ + NDTPA_PROXY_QLEN, /* u32 */ + NDTPA_LOCKTIME, /* u64, msecs */ + NDTPA_QUEUE_LENBYTES, /* u32 */ + NDTPA_MCAST_REPROBES, /* u32 */ + NDTPA_PAD, + NDTPA_INTERVAL_PROBE_TIME_MS, /* u64, msecs */ + __NDTPA_MAX +}; +#define NDTPA_MAX (__NDTPA_MAX - 1) + +struct ndtmsg { + __u8 ndtm_family; + __u8 ndtm_pad1; + __u16 ndtm_pad2; +}; + +struct ndt_config { + __u16 ndtc_key_len; + __u16 ndtc_entry_size; + __u32 ndtc_entries; + __u32 ndtc_last_flush; /* delta to now in msecs */ + __u32 ndtc_last_rand; /* delta to now in msecs */ + __u32 ndtc_hash_rnd; + __u32 ndtc_hash_mask; + __u32 ndtc_hash_chain_gc; + __u32 ndtc_proxy_qlen; +}; + +enum { + NDTA_UNSPEC, + NDTA_NAME, /* char *, unchangeable */ + NDTA_THRESH1, /* u32 */ + NDTA_THRESH2, /* u32 */ + NDTA_THRESH3, /* u32 */ + NDTA_CONFIG, /* struct ndt_config, read-only */ + NDTA_PARMS, /* nested TLV NDTPA_* */ + NDTA_STATS, /* struct ndt_stats, read-only */ + NDTA_GC_INTERVAL, /* u64, msecs */ + NDTA_PAD, + __NDTA_MAX +}; +#define NDTA_MAX (__NDTA_MAX - 1) + + /* FDB activity notification bits used in NFEA_ACTIVITY_NOTIFY: + * - FDB_NOTIFY_BIT - notify on activity/expire for any entry + * - FDB_NOTIFY_INACTIVE_BIT - mark as inactive to avoid multiple notifications + */ +enum { + FDB_NOTIFY_BIT = (1 << 0), + FDB_NOTIFY_INACTIVE_BIT = (1 << 1) +}; + +/* embedded into NDA_FDB_EXT_ATTRS: + * [NDA_FDB_EXT_ATTRS] = { + * [NFEA_ACTIVITY_NOTIFY] + * ... + * } + */ +enum { + NFEA_UNSPEC, + NFEA_ACTIVITY_NOTIFY, + NFEA_DONT_REFRESH, + __NFEA_MAX +}; +#define NFEA_MAX (__NFEA_MAX - 1) + +#endif diff --git a/tools/include/uapi/linux/netdev.h b/tools/include/uapi/linux/netdev.h new file mode 100644 index 000000000000..e0b579a1df4f --- /dev/null +++ b/tools/include/uapi/linux/netdev.h @@ -0,0 +1,239 @@ +/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */ +/* Do not edit directly, auto-generated from: */ +/* Documentation/netlink/specs/netdev.yaml */ +/* YNL-GEN uapi header */ +/* To regenerate run: tools/net/ynl/ynl-regen.sh */ + +#ifndef _UAPI_LINUX_NETDEV_H +#define _UAPI_LINUX_NETDEV_H + +#define NETDEV_FAMILY_NAME "netdev" +#define NETDEV_FAMILY_VERSION 1 + +/** + * enum netdev_xdp_act + * @NETDEV_XDP_ACT_BASIC: XDP features set supported by all drivers + * (XDP_ABORTED, XDP_DROP, XDP_PASS, XDP_TX) + * @NETDEV_XDP_ACT_REDIRECT: The netdev supports XDP_REDIRECT + * @NETDEV_XDP_ACT_NDO_XMIT: This feature informs if netdev implements + * ndo_xdp_xmit callback. + * @NETDEV_XDP_ACT_XSK_ZEROCOPY: This feature informs if netdev supports AF_XDP + * in zero copy mode. + * @NETDEV_XDP_ACT_HW_OFFLOAD: This feature informs if netdev supports XDP hw + * offloading. + * @NETDEV_XDP_ACT_RX_SG: This feature informs if netdev implements non-linear + * XDP buffer support in the driver napi callback. + * @NETDEV_XDP_ACT_NDO_XMIT_SG: This feature informs if netdev implements + * non-linear XDP buffer support in ndo_xdp_xmit callback. + */ +enum netdev_xdp_act { + NETDEV_XDP_ACT_BASIC = 1, + NETDEV_XDP_ACT_REDIRECT = 2, + NETDEV_XDP_ACT_NDO_XMIT = 4, + NETDEV_XDP_ACT_XSK_ZEROCOPY = 8, + NETDEV_XDP_ACT_HW_OFFLOAD = 16, + NETDEV_XDP_ACT_RX_SG = 32, + NETDEV_XDP_ACT_NDO_XMIT_SG = 64, + + /* private: */ + NETDEV_XDP_ACT_MASK = 127, +}; + +/** + * enum netdev_xdp_rx_metadata + * @NETDEV_XDP_RX_METADATA_TIMESTAMP: Device is capable of exposing receive HW + * timestamp via bpf_xdp_metadata_rx_timestamp(). + * @NETDEV_XDP_RX_METADATA_HASH: Device is capable of exposing receive packet + * hash via bpf_xdp_metadata_rx_hash(). + * @NETDEV_XDP_RX_METADATA_VLAN_TAG: Device is capable of exposing receive + * packet VLAN tag via bpf_xdp_metadata_rx_vlan_tag(). + */ +enum netdev_xdp_rx_metadata { + NETDEV_XDP_RX_METADATA_TIMESTAMP = 1, + NETDEV_XDP_RX_METADATA_HASH = 2, + NETDEV_XDP_RX_METADATA_VLAN_TAG = 4, +}; + +/** + * enum netdev_xsk_flags + * @NETDEV_XSK_FLAGS_TX_TIMESTAMP: HW timestamping egress packets is supported + * by the driver. + * @NETDEV_XSK_FLAGS_TX_CHECKSUM: L3 checksum HW offload is supported by the + * driver. + * @NETDEV_XSK_FLAGS_TX_LAUNCH_TIME_FIFO: Launch time HW offload is supported + * by the driver. + */ +enum netdev_xsk_flags { + NETDEV_XSK_FLAGS_TX_TIMESTAMP = 1, + NETDEV_XSK_FLAGS_TX_CHECKSUM = 2, + NETDEV_XSK_FLAGS_TX_LAUNCH_TIME_FIFO = 4, +}; + +enum netdev_queue_type { + NETDEV_QUEUE_TYPE_RX, + NETDEV_QUEUE_TYPE_TX, +}; + +enum netdev_qstats_scope { + NETDEV_QSTATS_SCOPE_QUEUE = 1, +}; + +enum netdev_napi_threaded { + NETDEV_NAPI_THREADED_DISABLED, + NETDEV_NAPI_THREADED_ENABLED, + NETDEV_NAPI_THREADED_BUSY_POLL, +}; + +enum { + NETDEV_A_DEV_IFINDEX = 1, + NETDEV_A_DEV_PAD, + NETDEV_A_DEV_XDP_FEATURES, + NETDEV_A_DEV_XDP_ZC_MAX_SEGS, + NETDEV_A_DEV_XDP_RX_METADATA_FEATURES, + NETDEV_A_DEV_XSK_FEATURES, + + __NETDEV_A_DEV_MAX, + NETDEV_A_DEV_MAX = (__NETDEV_A_DEV_MAX - 1) +}; + +enum { + __NETDEV_A_IO_URING_PROVIDER_INFO_MAX, + NETDEV_A_IO_URING_PROVIDER_INFO_MAX = (__NETDEV_A_IO_URING_PROVIDER_INFO_MAX - 1) +}; + +enum { + NETDEV_A_PAGE_POOL_ID = 1, + NETDEV_A_PAGE_POOL_IFINDEX, + NETDEV_A_PAGE_POOL_NAPI_ID, + NETDEV_A_PAGE_POOL_INFLIGHT, + NETDEV_A_PAGE_POOL_INFLIGHT_MEM, + NETDEV_A_PAGE_POOL_DETACH_TIME, + NETDEV_A_PAGE_POOL_DMABUF, + NETDEV_A_PAGE_POOL_IO_URING, + + __NETDEV_A_PAGE_POOL_MAX, + NETDEV_A_PAGE_POOL_MAX = (__NETDEV_A_PAGE_POOL_MAX - 1) +}; + +enum { + NETDEV_A_PAGE_POOL_STATS_INFO = 1, + NETDEV_A_PAGE_POOL_STATS_ALLOC_FAST = 8, + NETDEV_A_PAGE_POOL_STATS_ALLOC_SLOW, + NETDEV_A_PAGE_POOL_STATS_ALLOC_SLOW_HIGH_ORDER, + NETDEV_A_PAGE_POOL_STATS_ALLOC_EMPTY, + NETDEV_A_PAGE_POOL_STATS_ALLOC_REFILL, + NETDEV_A_PAGE_POOL_STATS_ALLOC_WAIVE, + NETDEV_A_PAGE_POOL_STATS_RECYCLE_CACHED, + NETDEV_A_PAGE_POOL_STATS_RECYCLE_CACHE_FULL, + NETDEV_A_PAGE_POOL_STATS_RECYCLE_RING, + NETDEV_A_PAGE_POOL_STATS_RECYCLE_RING_FULL, + NETDEV_A_PAGE_POOL_STATS_RECYCLE_RELEASED_REFCNT, + + __NETDEV_A_PAGE_POOL_STATS_MAX, + NETDEV_A_PAGE_POOL_STATS_MAX = (__NETDEV_A_PAGE_POOL_STATS_MAX - 1) +}; + +enum { + NETDEV_A_NAPI_IFINDEX = 1, + NETDEV_A_NAPI_ID, + NETDEV_A_NAPI_IRQ, + NETDEV_A_NAPI_PID, + NETDEV_A_NAPI_DEFER_HARD_IRQS, + NETDEV_A_NAPI_GRO_FLUSH_TIMEOUT, + NETDEV_A_NAPI_IRQ_SUSPEND_TIMEOUT, + NETDEV_A_NAPI_THREADED, + + __NETDEV_A_NAPI_MAX, + NETDEV_A_NAPI_MAX = (__NETDEV_A_NAPI_MAX - 1) +}; + +enum { + __NETDEV_A_XSK_INFO_MAX, + NETDEV_A_XSK_INFO_MAX = (__NETDEV_A_XSK_INFO_MAX - 1) +}; + +enum { + NETDEV_A_QUEUE_ID = 1, + NETDEV_A_QUEUE_IFINDEX, + NETDEV_A_QUEUE_TYPE, + NETDEV_A_QUEUE_NAPI_ID, + NETDEV_A_QUEUE_DMABUF, + NETDEV_A_QUEUE_IO_URING, + NETDEV_A_QUEUE_XSK, + + __NETDEV_A_QUEUE_MAX, + NETDEV_A_QUEUE_MAX = (__NETDEV_A_QUEUE_MAX - 1) +}; + +enum { + NETDEV_A_QSTATS_IFINDEX = 1, + NETDEV_A_QSTATS_QUEUE_TYPE, + NETDEV_A_QSTATS_QUEUE_ID, + NETDEV_A_QSTATS_SCOPE, + NETDEV_A_QSTATS_RX_PACKETS = 8, + NETDEV_A_QSTATS_RX_BYTES, + NETDEV_A_QSTATS_TX_PACKETS, + NETDEV_A_QSTATS_TX_BYTES, + NETDEV_A_QSTATS_RX_ALLOC_FAIL, + NETDEV_A_QSTATS_RX_HW_DROPS, + NETDEV_A_QSTATS_RX_HW_DROP_OVERRUNS, + NETDEV_A_QSTATS_RX_CSUM_COMPLETE, + NETDEV_A_QSTATS_RX_CSUM_UNNECESSARY, + NETDEV_A_QSTATS_RX_CSUM_NONE, + NETDEV_A_QSTATS_RX_CSUM_BAD, + NETDEV_A_QSTATS_RX_HW_GRO_PACKETS, + NETDEV_A_QSTATS_RX_HW_GRO_BYTES, + NETDEV_A_QSTATS_RX_HW_GRO_WIRE_PACKETS, + NETDEV_A_QSTATS_RX_HW_GRO_WIRE_BYTES, + NETDEV_A_QSTATS_RX_HW_DROP_RATELIMITS, + NETDEV_A_QSTATS_TX_HW_DROPS, + NETDEV_A_QSTATS_TX_HW_DROP_ERRORS, + NETDEV_A_QSTATS_TX_CSUM_NONE, + NETDEV_A_QSTATS_TX_NEEDS_CSUM, + NETDEV_A_QSTATS_TX_HW_GSO_PACKETS, + NETDEV_A_QSTATS_TX_HW_GSO_BYTES, + NETDEV_A_QSTATS_TX_HW_GSO_WIRE_PACKETS, + NETDEV_A_QSTATS_TX_HW_GSO_WIRE_BYTES, + NETDEV_A_QSTATS_TX_HW_DROP_RATELIMITS, + NETDEV_A_QSTATS_TX_STOP, + NETDEV_A_QSTATS_TX_WAKE, + + __NETDEV_A_QSTATS_MAX, + NETDEV_A_QSTATS_MAX = (__NETDEV_A_QSTATS_MAX - 1) +}; + +enum { + NETDEV_A_DMABUF_IFINDEX = 1, + NETDEV_A_DMABUF_QUEUES, + NETDEV_A_DMABUF_FD, + NETDEV_A_DMABUF_ID, + + __NETDEV_A_DMABUF_MAX, + NETDEV_A_DMABUF_MAX = (__NETDEV_A_DMABUF_MAX - 1) +}; + +enum { + NETDEV_CMD_DEV_GET = 1, + NETDEV_CMD_DEV_ADD_NTF, + NETDEV_CMD_DEV_DEL_NTF, + NETDEV_CMD_DEV_CHANGE_NTF, + NETDEV_CMD_PAGE_POOL_GET, + NETDEV_CMD_PAGE_POOL_ADD_NTF, + NETDEV_CMD_PAGE_POOL_DEL_NTF, + NETDEV_CMD_PAGE_POOL_CHANGE_NTF, + NETDEV_CMD_PAGE_POOL_STATS_GET, + NETDEV_CMD_QUEUE_GET, + NETDEV_CMD_NAPI_GET, + NETDEV_CMD_QSTATS_GET, + NETDEV_CMD_BIND_RX, + NETDEV_CMD_NAPI_SET, + NETDEV_CMD_BIND_TX, + + __NETDEV_CMD_MAX, + NETDEV_CMD_MAX = (__NETDEV_CMD_MAX - 1) +}; + +#define NETDEV_MCGRP_MGMT "mgmt" +#define NETDEV_MCGRP_PAGE_POOL "page-pool" + +#endif /* _UAPI_LINUX_NETDEV_H */ diff --git a/tools/include/uapi/linux/netfilter.h b/tools/include/uapi/linux/netfilter.h new file mode 100644 index 000000000000..5a79ccb76701 --- /dev/null +++ b/tools/include/uapi/linux/netfilter.h @@ -0,0 +1,80 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _UAPI__LINUX_NETFILTER_H +#define _UAPI__LINUX_NETFILTER_H + +#include <linux/types.h> +#include <linux/compiler.h> +#include <linux/in.h> +#include <linux/in6.h> + +/* Responses from hook functions. */ +#define NF_DROP 0 +#define NF_ACCEPT 1 +#define NF_STOLEN 2 +#define NF_QUEUE 3 +#define NF_REPEAT 4 +#define NF_STOP 5 /* Deprecated, for userspace nf_queue compatibility. */ +#define NF_MAX_VERDICT NF_STOP + +/* we overload the higher bits for encoding auxiliary data such as the queue + * number or errno values. Not nice, but better than additional function + * arguments. */ +#define NF_VERDICT_MASK 0x000000ff + +/* extra verdict flags have mask 0x0000ff00 */ +#define NF_VERDICT_FLAG_QUEUE_BYPASS 0x00008000 + +/* queue number (NF_QUEUE) or errno (NF_DROP) */ +#define NF_VERDICT_QMASK 0xffff0000 +#define NF_VERDICT_QBITS 16 + +#define NF_QUEUE_NR(x) ((((x) << 16) & NF_VERDICT_QMASK) | NF_QUEUE) + +#define NF_DROP_ERR(x) (((-x) << 16) | NF_DROP) + +/* only for userspace compatibility */ +#ifndef __KERNEL__ + +/* NF_VERDICT_BITS should be 8 now, but userspace might break if this changes */ +#define NF_VERDICT_BITS 16 +#endif + +enum nf_inet_hooks { + NF_INET_PRE_ROUTING, + NF_INET_LOCAL_IN, + NF_INET_FORWARD, + NF_INET_LOCAL_OUT, + NF_INET_POST_ROUTING, + NF_INET_NUMHOOKS, + NF_INET_INGRESS = NF_INET_NUMHOOKS, +}; + +enum nf_dev_hooks { + NF_NETDEV_INGRESS, + NF_NETDEV_EGRESS, + NF_NETDEV_NUMHOOKS +}; + +enum { + NFPROTO_UNSPEC = 0, + NFPROTO_INET = 1, + NFPROTO_IPV4 = 2, + NFPROTO_ARP = 3, + NFPROTO_NETDEV = 5, + NFPROTO_BRIDGE = 7, + NFPROTO_IPV6 = 10, +#ifndef __KERNEL__ /* no longer supported by kernel */ + NFPROTO_DECNET = 12, +#endif + NFPROTO_NUMPROTO, +}; + +union nf_inet_addr { + __u32 all[4]; + __be32 ip; + __be32 ip6[4]; + struct in_addr in; + struct in6_addr in6; +}; + +#endif /* _UAPI__LINUX_NETFILTER_H */ diff --git a/tools/include/uapi/linux/netfilter_arp.h b/tools/include/uapi/linux/netfilter_arp.h new file mode 100644 index 000000000000..791dfc5ae907 --- /dev/null +++ b/tools/include/uapi/linux/netfilter_arp.h @@ -0,0 +1,23 @@ +/* SPDX-License-Identifier: GPL-1.0+ WITH Linux-syscall-note */ +#ifndef __LINUX_ARP_NETFILTER_H +#define __LINUX_ARP_NETFILTER_H + +/* ARP-specific defines for netfilter. + * (C)2002 Rusty Russell IBM -- This code is GPL. + */ + +#include <linux/netfilter.h> + +/* There is no PF_ARP. */ +#define NF_ARP 0 + +/* ARP Hooks */ +#define NF_ARP_IN 0 +#define NF_ARP_OUT 1 +#define NF_ARP_FORWARD 2 + +#ifndef __KERNEL__ +#define NF_ARP_NUMHOOKS 3 +#endif + +#endif /* __LINUX_ARP_NETFILTER_H */ diff --git a/tools/include/uapi/linux/netlink.h b/tools/include/uapi/linux/netlink.h new file mode 100644 index 000000000000..0a4d73317759 --- /dev/null +++ b/tools/include/uapi/linux/netlink.h @@ -0,0 +1,252 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _UAPI__LINUX_NETLINK_H +#define _UAPI__LINUX_NETLINK_H + +#include <linux/kernel.h> +#include <linux/socket.h> /* for __kernel_sa_family_t */ +#include <linux/types.h> + +#define NETLINK_ROUTE 0 /* Routing/device hook */ +#define NETLINK_UNUSED 1 /* Unused number */ +#define NETLINK_USERSOCK 2 /* Reserved for user mode socket protocols */ +#define NETLINK_FIREWALL 3 /* Unused number, formerly ip_queue */ +#define NETLINK_SOCK_DIAG 4 /* socket monitoring */ +#define NETLINK_NFLOG 5 /* netfilter/iptables ULOG */ +#define NETLINK_XFRM 6 /* ipsec */ +#define NETLINK_SELINUX 7 /* SELinux event notifications */ +#define NETLINK_ISCSI 8 /* Open-iSCSI */ +#define NETLINK_AUDIT 9 /* auditing */ +#define NETLINK_FIB_LOOKUP 10 +#define NETLINK_CONNECTOR 11 +#define NETLINK_NETFILTER 12 /* netfilter subsystem */ +#define NETLINK_IP6_FW 13 +#define NETLINK_DNRTMSG 14 /* DECnet routing messages */ +#define NETLINK_KOBJECT_UEVENT 15 /* Kernel messages to userspace */ +#define NETLINK_GENERIC 16 +/* leave room for NETLINK_DM (DM Events) */ +#define NETLINK_SCSITRANSPORT 18 /* SCSI Transports */ +#define NETLINK_ECRYPTFS 19 +#define NETLINK_RDMA 20 +#define NETLINK_CRYPTO 21 /* Crypto layer */ +#define NETLINK_SMC 22 /* SMC monitoring */ + +#define NETLINK_INET_DIAG NETLINK_SOCK_DIAG + +#define MAX_LINKS 32 + +struct sockaddr_nl { + __kernel_sa_family_t nl_family; /* AF_NETLINK */ + unsigned short nl_pad; /* zero */ + __u32 nl_pid; /* port ID */ + __u32 nl_groups; /* multicast groups mask */ +}; + +struct nlmsghdr { + __u32 nlmsg_len; /* Length of message including header */ + __u16 nlmsg_type; /* Message content */ + __u16 nlmsg_flags; /* Additional flags */ + __u32 nlmsg_seq; /* Sequence number */ + __u32 nlmsg_pid; /* Sending process port ID */ +}; + +/* Flags values */ + +#define NLM_F_REQUEST 0x01 /* It is request message. */ +#define NLM_F_MULTI 0x02 /* Multipart message, terminated by NLMSG_DONE */ +#define NLM_F_ACK 0x04 /* Reply with ack, with zero or error code */ +#define NLM_F_ECHO 0x08 /* Echo this request */ +#define NLM_F_DUMP_INTR 0x10 /* Dump was inconsistent due to sequence change */ +#define NLM_F_DUMP_FILTERED 0x20 /* Dump was filtered as requested */ + +/* Modifiers to GET request */ +#define NLM_F_ROOT 0x100 /* specify tree root */ +#define NLM_F_MATCH 0x200 /* return all matching */ +#define NLM_F_ATOMIC 0x400 /* atomic GET */ +#define NLM_F_DUMP (NLM_F_ROOT|NLM_F_MATCH) + +/* Modifiers to NEW request */ +#define NLM_F_REPLACE 0x100 /* Override existing */ +#define NLM_F_EXCL 0x200 /* Do not touch, if it exists */ +#define NLM_F_CREATE 0x400 /* Create, if it does not exist */ +#define NLM_F_APPEND 0x800 /* Add to end of list */ + +/* Modifiers to DELETE request */ +#define NLM_F_NONREC 0x100 /* Do not delete recursively */ + +/* Flags for ACK message */ +#define NLM_F_CAPPED 0x100 /* request was capped */ +#define NLM_F_ACK_TLVS 0x200 /* extended ACK TVLs were included */ + +/* + 4.4BSD ADD NLM_F_CREATE|NLM_F_EXCL + 4.4BSD CHANGE NLM_F_REPLACE + + True CHANGE NLM_F_CREATE|NLM_F_REPLACE + Append NLM_F_CREATE + Check NLM_F_EXCL + */ + +#define NLMSG_ALIGNTO 4U +#define NLMSG_ALIGN(len) ( ((len)+NLMSG_ALIGNTO-1) & ~(NLMSG_ALIGNTO-1) ) +#define NLMSG_HDRLEN ((int) NLMSG_ALIGN(sizeof(struct nlmsghdr))) +#define NLMSG_LENGTH(len) ((len) + NLMSG_HDRLEN) +#define NLMSG_SPACE(len) NLMSG_ALIGN(NLMSG_LENGTH(len)) +#define NLMSG_DATA(nlh) ((void*)(((char*)nlh) + NLMSG_LENGTH(0))) +#define NLMSG_NEXT(nlh,len) ((len) -= NLMSG_ALIGN((nlh)->nlmsg_len), \ + (struct nlmsghdr*)(((char*)(nlh)) + NLMSG_ALIGN((nlh)->nlmsg_len))) +#define NLMSG_OK(nlh,len) ((len) >= (int)sizeof(struct nlmsghdr) && \ + (nlh)->nlmsg_len >= sizeof(struct nlmsghdr) && \ + (nlh)->nlmsg_len <= (len)) +#define NLMSG_PAYLOAD(nlh,len) ((nlh)->nlmsg_len - NLMSG_SPACE((len))) + +#define NLMSG_NOOP 0x1 /* Nothing. */ +#define NLMSG_ERROR 0x2 /* Error */ +#define NLMSG_DONE 0x3 /* End of a dump */ +#define NLMSG_OVERRUN 0x4 /* Data lost */ + +#define NLMSG_MIN_TYPE 0x10 /* < 0x10: reserved control messages */ + +struct nlmsgerr { + int error; + struct nlmsghdr msg; + /* + * followed by the message contents unless NETLINK_CAP_ACK was set + * or the ACK indicates success (error == 0) + * message length is aligned with NLMSG_ALIGN() + */ + /* + * followed by TLVs defined in enum nlmsgerr_attrs + * if NETLINK_EXT_ACK was set + */ +}; + +/** + * enum nlmsgerr_attrs - nlmsgerr attributes + * @NLMSGERR_ATTR_UNUSED: unused + * @NLMSGERR_ATTR_MSG: error message string (string) + * @NLMSGERR_ATTR_OFFS: offset of the invalid attribute in the original + * message, counting from the beginning of the header (u32) + * @NLMSGERR_ATTR_COOKIE: arbitrary subsystem specific cookie to + * be used - in the success case - to identify a created + * object or operation or similar (binary) + * @__NLMSGERR_ATTR_MAX: number of attributes + * @NLMSGERR_ATTR_MAX: highest attribute number + */ +enum nlmsgerr_attrs { + NLMSGERR_ATTR_UNUSED, + NLMSGERR_ATTR_MSG, + NLMSGERR_ATTR_OFFS, + NLMSGERR_ATTR_COOKIE, + + __NLMSGERR_ATTR_MAX, + NLMSGERR_ATTR_MAX = __NLMSGERR_ATTR_MAX - 1 +}; + +#define NETLINK_ADD_MEMBERSHIP 1 +#define NETLINK_DROP_MEMBERSHIP 2 +#define NETLINK_PKTINFO 3 +#define NETLINK_BROADCAST_ERROR 4 +#define NETLINK_NO_ENOBUFS 5 +#ifndef __KERNEL__ +#define NETLINK_RX_RING 6 +#define NETLINK_TX_RING 7 +#endif +#define NETLINK_LISTEN_ALL_NSID 8 +#define NETLINK_LIST_MEMBERSHIPS 9 +#define NETLINK_CAP_ACK 10 +#define NETLINK_EXT_ACK 11 +#define NETLINK_GET_STRICT_CHK 12 + +struct nl_pktinfo { + __u32 group; +}; + +struct nl_mmap_req { + unsigned int nm_block_size; + unsigned int nm_block_nr; + unsigned int nm_frame_size; + unsigned int nm_frame_nr; +}; + +struct nl_mmap_hdr { + unsigned int nm_status; + unsigned int nm_len; + __u32 nm_group; + /* credentials */ + __u32 nm_pid; + __u32 nm_uid; + __u32 nm_gid; +}; + +#ifndef __KERNEL__ +enum nl_mmap_status { + NL_MMAP_STATUS_UNUSED, + NL_MMAP_STATUS_RESERVED, + NL_MMAP_STATUS_VALID, + NL_MMAP_STATUS_COPY, + NL_MMAP_STATUS_SKIP, +}; + +#define NL_MMAP_MSG_ALIGNMENT NLMSG_ALIGNTO +#define NL_MMAP_MSG_ALIGN(sz) __ALIGN_KERNEL(sz, NL_MMAP_MSG_ALIGNMENT) +#define NL_MMAP_HDRLEN NL_MMAP_MSG_ALIGN(sizeof(struct nl_mmap_hdr)) +#endif + +#define NET_MAJOR 36 /* Major 36 is reserved for networking */ + +enum { + NETLINK_UNCONNECTED = 0, + NETLINK_CONNECTED, +}; + +/* + * <------- NLA_HDRLEN ------> <-- NLA_ALIGN(payload)--> + * +---------------------+- - -+- - - - - - - - - -+- - -+ + * | Header | Pad | Payload | Pad | + * | (struct nlattr) | ing | | ing | + * +---------------------+- - -+- - - - - - - - - -+- - -+ + * <-------------- nlattr->nla_len --------------> + */ + +struct nlattr { + __u16 nla_len; + __u16 nla_type; +}; + +/* + * nla_type (16 bits) + * +---+---+-------------------------------+ + * | N | O | Attribute Type | + * +---+---+-------------------------------+ + * N := Carries nested attributes + * O := Payload stored in network byte order + * + * Note: The N and O flag are mutually exclusive. + */ +#define NLA_F_NESTED (1 << 15) +#define NLA_F_NET_BYTEORDER (1 << 14) +#define NLA_TYPE_MASK ~(NLA_F_NESTED | NLA_F_NET_BYTEORDER) + +#define NLA_ALIGNTO 4 +#define NLA_ALIGN(len) (((len) + NLA_ALIGNTO - 1) & ~(NLA_ALIGNTO - 1)) +#define NLA_HDRLEN ((int) NLA_ALIGN(sizeof(struct nlattr))) + +/* Generic 32 bitflags attribute content sent to the kernel. + * + * The value is a bitmap that defines the values being set + * The selector is a bitmask that defines which value is legit + * + * Examples: + * value = 0x0, and selector = 0x1 + * implies we are selecting bit 1 and we want to set its value to 0. + * + * value = 0x2, and selector = 0x2 + * implies we are selecting bit 2 and we want to set its value to 1. + * + */ +struct nla_bitfield32 { + __u32 value; + __u32 selector; +}; + +#endif /* _UAPI__LINUX_NETLINK_H */ diff --git a/tools/include/uapi/linux/nsfs.h b/tools/include/uapi/linux/nsfs.h new file mode 100644 index 000000000000..a25e38d1c874 --- /dev/null +++ b/tools/include/uapi/linux/nsfs.h @@ -0,0 +1,128 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __LINUX_NSFS_H +#define __LINUX_NSFS_H + +#include <linux/ioctl.h> +#include <linux/types.h> + +#define NSIO 0xb7 + +/* Returns a file descriptor that refers to an owning user namespace */ +#define NS_GET_USERNS _IO(NSIO, 0x1) +/* Returns a file descriptor that refers to a parent namespace */ +#define NS_GET_PARENT _IO(NSIO, 0x2) +/* Returns the type of namespace (CLONE_NEW* value) referred to by + file descriptor */ +#define NS_GET_NSTYPE _IO(NSIO, 0x3) +/* Get owner UID (in the caller's user namespace) for a user namespace */ +#define NS_GET_OWNER_UID _IO(NSIO, 0x4) +/* Translate pid from target pid namespace into the caller's pid namespace. */ +#define NS_GET_PID_FROM_PIDNS _IOR(NSIO, 0x6, int) +/* Return thread-group leader id of pid in the callers pid namespace. */ +#define NS_GET_TGID_FROM_PIDNS _IOR(NSIO, 0x7, int) +/* Translate pid from caller's pid namespace into a target pid namespace. */ +#define NS_GET_PID_IN_PIDNS _IOR(NSIO, 0x8, int) +/* Return thread-group leader id of pid in the target pid namespace. */ +#define NS_GET_TGID_IN_PIDNS _IOR(NSIO, 0x9, int) + +struct mnt_ns_info { + __u32 size; + __u32 nr_mounts; + __u64 mnt_ns_id; +}; + +#define MNT_NS_INFO_SIZE_VER0 16 /* size of first published struct */ + +/* Get information about namespace. */ +#define NS_MNT_GET_INFO _IOR(NSIO, 10, struct mnt_ns_info) +/* Get next namespace. */ +#define NS_MNT_GET_NEXT _IOR(NSIO, 11, struct mnt_ns_info) +/* Get previous namespace. */ +#define NS_MNT_GET_PREV _IOR(NSIO, 12, struct mnt_ns_info) + +/* Retrieve namespace identifiers. */ +#define NS_GET_MNTNS_ID _IOR(NSIO, 5, __u64) +#define NS_GET_ID _IOR(NSIO, 13, __u64) + +enum init_ns_ino { + IPC_NS_INIT_INO = 0xEFFFFFFFU, + UTS_NS_INIT_INO = 0xEFFFFFFEU, + USER_NS_INIT_INO = 0xEFFFFFFDU, + PID_NS_INIT_INO = 0xEFFFFFFCU, + CGROUP_NS_INIT_INO = 0xEFFFFFFBU, + TIME_NS_INIT_INO = 0xEFFFFFFAU, + NET_NS_INIT_INO = 0xEFFFFFF9U, + MNT_NS_INIT_INO = 0xEFFFFFF8U, +#ifdef __KERNEL__ + MNT_NS_ANON_INO = 0xEFFFFFF7U, +#endif +}; + +struct nsfs_file_handle { + __u64 ns_id; + __u32 ns_type; + __u32 ns_inum; +}; + +#define NSFS_FILE_HANDLE_SIZE_VER0 16 /* sizeof first published struct */ +#define NSFS_FILE_HANDLE_SIZE_LATEST sizeof(struct nsfs_file_handle) /* sizeof latest published struct */ + +enum init_ns_id { + IPC_NS_INIT_ID = 1ULL, + UTS_NS_INIT_ID = 2ULL, + USER_NS_INIT_ID = 3ULL, + PID_NS_INIT_ID = 4ULL, + CGROUP_NS_INIT_ID = 5ULL, + TIME_NS_INIT_ID = 6ULL, + NET_NS_INIT_ID = 7ULL, + MNT_NS_INIT_ID = 8ULL, +#ifdef __KERNEL__ + NS_LAST_INIT_ID = MNT_NS_INIT_ID, +#endif +}; + +enum ns_type { + TIME_NS = (1ULL << 7), /* CLONE_NEWTIME */ + MNT_NS = (1ULL << 17), /* CLONE_NEWNS */ + CGROUP_NS = (1ULL << 25), /* CLONE_NEWCGROUP */ + UTS_NS = (1ULL << 26), /* CLONE_NEWUTS */ + IPC_NS = (1ULL << 27), /* CLONE_NEWIPC */ + USER_NS = (1ULL << 28), /* CLONE_NEWUSER */ + PID_NS = (1ULL << 29), /* CLONE_NEWPID */ + NET_NS = (1ULL << 30), /* CLONE_NEWNET */ +}; + +/** + * struct ns_id_req - namespace ID request structure + * @size: size of this structure + * @spare: reserved for future use + * @filter: filter mask + * @ns_id: last namespace id + * @user_ns_id: owning user namespace ID + * + * Structure for passing namespace ID and miscellaneous parameters to + * statns(2) and listns(2). + * + * For statns(2) @param represents the request mask. + * For listns(2) @param represents the last listed mount id (or zero). + */ +struct ns_id_req { + __u32 size; + __u32 spare; + __u64 ns_id; + struct /* listns */ { + __u32 ns_type; + __u32 spare2; + __u64 user_ns_id; + }; +}; + +/* + * Special @user_ns_id value that can be passed to listns() + */ +#define LISTNS_CURRENT_USER 0xffffffffffffffff /* Caller's userns */ + +/* List of all ns_id_req versions. */ +#define NS_ID_REQ_SIZE_VER0 32 /* sizeof first published struct */ + +#endif /* __LINUX_NSFS_H */ diff --git a/tools/include/uapi/linux/perf_event.h b/tools/include/uapi/linux/perf_event.h new file mode 100644 index 000000000000..c44a8fb3e418 --- /dev/null +++ b/tools/include/uapi/linux/perf_event.h @@ -0,0 +1,1507 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Performance events: + * + * Copyright (C) 2008-2009, Thomas Gleixner <tglx@linutronix.de> + * Copyright (C) 2008-2011, Red Hat, Inc., Ingo Molnar + * Copyright (C) 2008-2011, Red Hat, Inc., Peter Zijlstra + * + * Data type definitions, declarations, prototypes. + * + * Started by: Thomas Gleixner and Ingo Molnar + * + * For licencing details see kernel-base/COPYING + */ +#ifndef _UAPI_LINUX_PERF_EVENT_H +#define _UAPI_LINUX_PERF_EVENT_H + +#include <linux/types.h> +#include <linux/ioctl.h> +#include <asm/byteorder.h> + +/* + * User-space ABI bits: + */ + +/* + * attr.type + */ +enum perf_type_id { + PERF_TYPE_HARDWARE = 0, + PERF_TYPE_SOFTWARE = 1, + PERF_TYPE_TRACEPOINT = 2, + PERF_TYPE_HW_CACHE = 3, + PERF_TYPE_RAW = 4, + PERF_TYPE_BREAKPOINT = 5, + + PERF_TYPE_MAX, /* non-ABI */ +}; + +/* + * attr.config layout for type PERF_TYPE_HARDWARE and PERF_TYPE_HW_CACHE + * + * PERF_TYPE_HARDWARE: 0xEEEEEEEE000000AA + * AA: hardware event ID + * EEEEEEEE: PMU type ID + * + * PERF_TYPE_HW_CACHE: 0xEEEEEEEE00DDCCBB + * BB: hardware cache ID + * CC: hardware cache op ID + * DD: hardware cache op result ID + * EEEEEEEE: PMU type ID + * + * If the PMU type ID is 0, PERF_TYPE_RAW will be applied. + */ +#define PERF_PMU_TYPE_SHIFT 32 +#define PERF_HW_EVENT_MASK 0xffffffff + +/* + * Generalized performance event event_id types, used by the + * attr.event_id parameter of the sys_perf_event_open() + * syscall: + */ +enum perf_hw_id { + /* + * Common hardware events, generalized by the kernel: + */ + PERF_COUNT_HW_CPU_CYCLES = 0, + PERF_COUNT_HW_INSTRUCTIONS = 1, + PERF_COUNT_HW_CACHE_REFERENCES = 2, + PERF_COUNT_HW_CACHE_MISSES = 3, + PERF_COUNT_HW_BRANCH_INSTRUCTIONS = 4, + PERF_COUNT_HW_BRANCH_MISSES = 5, + PERF_COUNT_HW_BUS_CYCLES = 6, + PERF_COUNT_HW_STALLED_CYCLES_FRONTEND = 7, + PERF_COUNT_HW_STALLED_CYCLES_BACKEND = 8, + PERF_COUNT_HW_REF_CPU_CYCLES = 9, + + PERF_COUNT_HW_MAX, /* non-ABI */ +}; + +/* + * Generalized hardware cache events: + * + * { L1-D, L1-I, LLC, ITLB, DTLB, BPU, NODE } x + * { read, write, prefetch } x + * { accesses, misses } + */ +enum perf_hw_cache_id { + PERF_COUNT_HW_CACHE_L1D = 0, + PERF_COUNT_HW_CACHE_L1I = 1, + PERF_COUNT_HW_CACHE_LL = 2, + PERF_COUNT_HW_CACHE_DTLB = 3, + PERF_COUNT_HW_CACHE_ITLB = 4, + PERF_COUNT_HW_CACHE_BPU = 5, + PERF_COUNT_HW_CACHE_NODE = 6, + + PERF_COUNT_HW_CACHE_MAX, /* non-ABI */ +}; + +enum perf_hw_cache_op_id { + PERF_COUNT_HW_CACHE_OP_READ = 0, + PERF_COUNT_HW_CACHE_OP_WRITE = 1, + PERF_COUNT_HW_CACHE_OP_PREFETCH = 2, + + PERF_COUNT_HW_CACHE_OP_MAX, /* non-ABI */ +}; + +enum perf_hw_cache_op_result_id { + PERF_COUNT_HW_CACHE_RESULT_ACCESS = 0, + PERF_COUNT_HW_CACHE_RESULT_MISS = 1, + + PERF_COUNT_HW_CACHE_RESULT_MAX, /* non-ABI */ +}; + +/* + * Special "software" events provided by the kernel, even if the hardware + * does not support performance events. These events measure various + * physical and SW events of the kernel (and allow the profiling of them as + * well): + */ +enum perf_sw_ids { + PERF_COUNT_SW_CPU_CLOCK = 0, + PERF_COUNT_SW_TASK_CLOCK = 1, + PERF_COUNT_SW_PAGE_FAULTS = 2, + PERF_COUNT_SW_CONTEXT_SWITCHES = 3, + PERF_COUNT_SW_CPU_MIGRATIONS = 4, + PERF_COUNT_SW_PAGE_FAULTS_MIN = 5, + PERF_COUNT_SW_PAGE_FAULTS_MAJ = 6, + PERF_COUNT_SW_ALIGNMENT_FAULTS = 7, + PERF_COUNT_SW_EMULATION_FAULTS = 8, + PERF_COUNT_SW_DUMMY = 9, + PERF_COUNT_SW_BPF_OUTPUT = 10, + PERF_COUNT_SW_CGROUP_SWITCHES = 11, + + PERF_COUNT_SW_MAX, /* non-ABI */ +}; + +/* + * Bits that can be set in attr.sample_type to request information + * in the overflow packets. + */ +enum perf_event_sample_format { + PERF_SAMPLE_IP = 1U << 0, + PERF_SAMPLE_TID = 1U << 1, + PERF_SAMPLE_TIME = 1U << 2, + PERF_SAMPLE_ADDR = 1U << 3, + PERF_SAMPLE_READ = 1U << 4, + PERF_SAMPLE_CALLCHAIN = 1U << 5, + PERF_SAMPLE_ID = 1U << 6, + PERF_SAMPLE_CPU = 1U << 7, + PERF_SAMPLE_PERIOD = 1U << 8, + PERF_SAMPLE_STREAM_ID = 1U << 9, + PERF_SAMPLE_RAW = 1U << 10, + PERF_SAMPLE_BRANCH_STACK = 1U << 11, + PERF_SAMPLE_REGS_USER = 1U << 12, + PERF_SAMPLE_STACK_USER = 1U << 13, + PERF_SAMPLE_WEIGHT = 1U << 14, + PERF_SAMPLE_DATA_SRC = 1U << 15, + PERF_SAMPLE_IDENTIFIER = 1U << 16, + PERF_SAMPLE_TRANSACTION = 1U << 17, + PERF_SAMPLE_REGS_INTR = 1U << 18, + PERF_SAMPLE_PHYS_ADDR = 1U << 19, + PERF_SAMPLE_AUX = 1U << 20, + PERF_SAMPLE_CGROUP = 1U << 21, + PERF_SAMPLE_DATA_PAGE_SIZE = 1U << 22, + PERF_SAMPLE_CODE_PAGE_SIZE = 1U << 23, + PERF_SAMPLE_WEIGHT_STRUCT = 1U << 24, + + PERF_SAMPLE_MAX = 1U << 25, /* non-ABI */ +}; + +#define PERF_SAMPLE_WEIGHT_TYPE (PERF_SAMPLE_WEIGHT | PERF_SAMPLE_WEIGHT_STRUCT) + +/* + * Values to program into branch_sample_type when PERF_SAMPLE_BRANCH is set. + * + * If the user does not pass priv level information via branch_sample_type, + * the kernel uses the event's priv level. Branch and event priv levels do + * not have to match. Branch priv level is checked for permissions. + * + * The branch types can be combined, however BRANCH_ANY covers all types + * of branches and therefore it supersedes all the other types. + */ +enum perf_branch_sample_type_shift { + PERF_SAMPLE_BRANCH_USER_SHIFT = 0, /* user branches */ + PERF_SAMPLE_BRANCH_KERNEL_SHIFT = 1, /* kernel branches */ + PERF_SAMPLE_BRANCH_HV_SHIFT = 2, /* hypervisor branches */ + + PERF_SAMPLE_BRANCH_ANY_SHIFT = 3, /* any branch types */ + PERF_SAMPLE_BRANCH_ANY_CALL_SHIFT = 4, /* any call branch */ + PERF_SAMPLE_BRANCH_ANY_RETURN_SHIFT = 5, /* any return branch */ + PERF_SAMPLE_BRANCH_IND_CALL_SHIFT = 6, /* indirect calls */ + PERF_SAMPLE_BRANCH_ABORT_TX_SHIFT = 7, /* transaction aborts */ + PERF_SAMPLE_BRANCH_IN_TX_SHIFT = 8, /* in transaction */ + PERF_SAMPLE_BRANCH_NO_TX_SHIFT = 9, /* not in transaction */ + PERF_SAMPLE_BRANCH_COND_SHIFT = 10, /* conditional branches */ + + PERF_SAMPLE_BRANCH_CALL_STACK_SHIFT = 11, /* CALL/RET stack */ + PERF_SAMPLE_BRANCH_IND_JUMP_SHIFT = 12, /* indirect jumps */ + PERF_SAMPLE_BRANCH_CALL_SHIFT = 13, /* direct call */ + + PERF_SAMPLE_BRANCH_NO_FLAGS_SHIFT = 14, /* no flags */ + PERF_SAMPLE_BRANCH_NO_CYCLES_SHIFT = 15, /* no cycles */ + + PERF_SAMPLE_BRANCH_TYPE_SAVE_SHIFT = 16, /* save branch type */ + + PERF_SAMPLE_BRANCH_HW_INDEX_SHIFT = 17, /* save low level index of raw branch records */ + + PERF_SAMPLE_BRANCH_PRIV_SAVE_SHIFT = 18, /* save privilege mode */ + + PERF_SAMPLE_BRANCH_COUNTERS_SHIFT = 19, /* save occurrences of events on a branch */ + + PERF_SAMPLE_BRANCH_MAX_SHIFT /* non-ABI */ +}; + +enum perf_branch_sample_type { + PERF_SAMPLE_BRANCH_USER = 1U << PERF_SAMPLE_BRANCH_USER_SHIFT, + PERF_SAMPLE_BRANCH_KERNEL = 1U << PERF_SAMPLE_BRANCH_KERNEL_SHIFT, + PERF_SAMPLE_BRANCH_HV = 1U << PERF_SAMPLE_BRANCH_HV_SHIFT, + + PERF_SAMPLE_BRANCH_ANY = 1U << PERF_SAMPLE_BRANCH_ANY_SHIFT, + PERF_SAMPLE_BRANCH_ANY_CALL = 1U << PERF_SAMPLE_BRANCH_ANY_CALL_SHIFT, + PERF_SAMPLE_BRANCH_ANY_RETURN = 1U << PERF_SAMPLE_BRANCH_ANY_RETURN_SHIFT, + PERF_SAMPLE_BRANCH_IND_CALL = 1U << PERF_SAMPLE_BRANCH_IND_CALL_SHIFT, + PERF_SAMPLE_BRANCH_ABORT_TX = 1U << PERF_SAMPLE_BRANCH_ABORT_TX_SHIFT, + PERF_SAMPLE_BRANCH_IN_TX = 1U << PERF_SAMPLE_BRANCH_IN_TX_SHIFT, + PERF_SAMPLE_BRANCH_NO_TX = 1U << PERF_SAMPLE_BRANCH_NO_TX_SHIFT, + PERF_SAMPLE_BRANCH_COND = 1U << PERF_SAMPLE_BRANCH_COND_SHIFT, + + PERF_SAMPLE_BRANCH_CALL_STACK = 1U << PERF_SAMPLE_BRANCH_CALL_STACK_SHIFT, + PERF_SAMPLE_BRANCH_IND_JUMP = 1U << PERF_SAMPLE_BRANCH_IND_JUMP_SHIFT, + PERF_SAMPLE_BRANCH_CALL = 1U << PERF_SAMPLE_BRANCH_CALL_SHIFT, + + PERF_SAMPLE_BRANCH_NO_FLAGS = 1U << PERF_SAMPLE_BRANCH_NO_FLAGS_SHIFT, + PERF_SAMPLE_BRANCH_NO_CYCLES = 1U << PERF_SAMPLE_BRANCH_NO_CYCLES_SHIFT, + + PERF_SAMPLE_BRANCH_TYPE_SAVE = 1U << PERF_SAMPLE_BRANCH_TYPE_SAVE_SHIFT, + + PERF_SAMPLE_BRANCH_HW_INDEX = 1U << PERF_SAMPLE_BRANCH_HW_INDEX_SHIFT, + + PERF_SAMPLE_BRANCH_PRIV_SAVE = 1U << PERF_SAMPLE_BRANCH_PRIV_SAVE_SHIFT, + + PERF_SAMPLE_BRANCH_COUNTERS = 1U << PERF_SAMPLE_BRANCH_COUNTERS_SHIFT, + + PERF_SAMPLE_BRANCH_MAX = 1U << PERF_SAMPLE_BRANCH_MAX_SHIFT, +}; + +/* + * Common control flow change classifications: + */ +enum { + PERF_BR_UNKNOWN = 0, /* Unknown */ + PERF_BR_COND = 1, /* Conditional */ + PERF_BR_UNCOND = 2, /* Unconditional */ + PERF_BR_IND = 3, /* Indirect */ + PERF_BR_CALL = 4, /* Function call */ + PERF_BR_IND_CALL = 5, /* Indirect function call */ + PERF_BR_RET = 6, /* Function return */ + PERF_BR_SYSCALL = 7, /* Syscall */ + PERF_BR_SYSRET = 8, /* Syscall return */ + PERF_BR_COND_CALL = 9, /* Conditional function call */ + PERF_BR_COND_RET = 10, /* Conditional function return */ + PERF_BR_ERET = 11, /* Exception return */ + PERF_BR_IRQ = 12, /* IRQ */ + PERF_BR_SERROR = 13, /* System error */ + PERF_BR_NO_TX = 14, /* Not in transaction */ + PERF_BR_EXTEND_ABI = 15, /* Extend ABI */ + PERF_BR_MAX, +}; + +/* + * Common branch speculation outcome classifications: + */ +enum { + PERF_BR_SPEC_NA = 0, /* Not available */ + PERF_BR_SPEC_WRONG_PATH = 1, /* Speculative but on wrong path */ + PERF_BR_NON_SPEC_CORRECT_PATH = 2, /* Non-speculative but on correct path */ + PERF_BR_SPEC_CORRECT_PATH = 3, /* Speculative and on correct path */ + PERF_BR_SPEC_MAX, +}; + +enum { + PERF_BR_NEW_FAULT_ALGN = 0, /* Alignment fault */ + PERF_BR_NEW_FAULT_DATA = 1, /* Data fault */ + PERF_BR_NEW_FAULT_INST = 2, /* Inst fault */ + PERF_BR_NEW_ARCH_1 = 3, /* Architecture specific */ + PERF_BR_NEW_ARCH_2 = 4, /* Architecture specific */ + PERF_BR_NEW_ARCH_3 = 5, /* Architecture specific */ + PERF_BR_NEW_ARCH_4 = 6, /* Architecture specific */ + PERF_BR_NEW_ARCH_5 = 7, /* Architecture specific */ + PERF_BR_NEW_MAX, +}; + +enum { + PERF_BR_PRIV_UNKNOWN = 0, + PERF_BR_PRIV_USER = 1, + PERF_BR_PRIV_KERNEL = 2, + PERF_BR_PRIV_HV = 3, +}; + +#define PERF_BR_ARM64_FIQ PERF_BR_NEW_ARCH_1 +#define PERF_BR_ARM64_DEBUG_HALT PERF_BR_NEW_ARCH_2 +#define PERF_BR_ARM64_DEBUG_EXIT PERF_BR_NEW_ARCH_3 +#define PERF_BR_ARM64_DEBUG_INST PERF_BR_NEW_ARCH_4 +#define PERF_BR_ARM64_DEBUG_DATA PERF_BR_NEW_ARCH_5 + +#define PERF_SAMPLE_BRANCH_PLM_ALL \ + (PERF_SAMPLE_BRANCH_USER|\ + PERF_SAMPLE_BRANCH_KERNEL|\ + PERF_SAMPLE_BRANCH_HV) + +/* + * Values to determine ABI of the registers dump. + */ +enum perf_sample_regs_abi { + PERF_SAMPLE_REGS_ABI_NONE = 0, + PERF_SAMPLE_REGS_ABI_32 = 1, + PERF_SAMPLE_REGS_ABI_64 = 2, +}; + +/* + * Values for the memory transaction event qualifier, mostly for + * abort events. Multiple bits can be set. + */ +enum { + PERF_TXN_ELISION = (1 << 0), /* From elision */ + PERF_TXN_TRANSACTION = (1 << 1), /* From transaction */ + PERF_TXN_SYNC = (1 << 2), /* Instruction is related */ + PERF_TXN_ASYNC = (1 << 3), /* Instruction is not related */ + PERF_TXN_RETRY = (1 << 4), /* Retry possible */ + PERF_TXN_CONFLICT = (1 << 5), /* Conflict abort */ + PERF_TXN_CAPACITY_WRITE = (1 << 6), /* Capacity write abort */ + PERF_TXN_CAPACITY_READ = (1 << 7), /* Capacity read abort */ + + PERF_TXN_MAX = (1 << 8), /* non-ABI */ + + /* Bits 32..63 are reserved for the abort code */ + + PERF_TXN_ABORT_MASK = (0xffffffffULL << 32), + PERF_TXN_ABORT_SHIFT = 32, +}; + +/* + * The format of the data returned by read() on a perf event fd, + * as specified by attr.read_format: + * + * struct read_format { + * { u64 value; + * { u64 time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED + * { u64 time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING + * { u64 id; } && PERF_FORMAT_ID + * { u64 lost; } && PERF_FORMAT_LOST + * } && !PERF_FORMAT_GROUP + * + * { u64 nr; + * { u64 time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED + * { u64 time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING + * { u64 value; + * { u64 id; } && PERF_FORMAT_ID + * { u64 lost; } && PERF_FORMAT_LOST + * } cntr[nr]; + * } && PERF_FORMAT_GROUP + * }; + */ +enum perf_event_read_format { + PERF_FORMAT_TOTAL_TIME_ENABLED = 1U << 0, + PERF_FORMAT_TOTAL_TIME_RUNNING = 1U << 1, + PERF_FORMAT_ID = 1U << 2, + PERF_FORMAT_GROUP = 1U << 3, + PERF_FORMAT_LOST = 1U << 4, + + PERF_FORMAT_MAX = 1U << 5, /* non-ABI */ +}; + +#define PERF_ATTR_SIZE_VER0 64 /* Size of first published 'struct perf_event_attr' */ +#define PERF_ATTR_SIZE_VER1 72 /* Add: config2 */ +#define PERF_ATTR_SIZE_VER2 80 /* Add: branch_sample_type */ +#define PERF_ATTR_SIZE_VER3 96 /* Add: sample_regs_user */ + /* Add: sample_stack_user */ +#define PERF_ATTR_SIZE_VER4 104 /* Add: sample_regs_intr */ +#define PERF_ATTR_SIZE_VER5 112 /* Add: aux_watermark */ +#define PERF_ATTR_SIZE_VER6 120 /* Add: aux_sample_size */ +#define PERF_ATTR_SIZE_VER7 128 /* Add: sig_data */ +#define PERF_ATTR_SIZE_VER8 136 /* Add: config3 */ +#define PERF_ATTR_SIZE_VER9 144 /* add: config4 */ + +/* + * 'struct perf_event_attr' contains various attributes that define + * a performance event - most of them hardware related configuration + * details, but also a lot of behavioral switches and values implemented + * by the kernel. + */ +struct perf_event_attr { + + /* + * Major type: hardware/software/tracepoint/etc. + */ + __u32 type; + + /* + * Size of the attr structure, for forward/backwards compatibility. + */ + __u32 size; + + /* + * Type specific configuration information. + */ + __u64 config; + + union { + __u64 sample_period; + __u64 sample_freq; + }; + + __u64 sample_type; + __u64 read_format; + + __u64 disabled : 1, /* off by default */ + inherit : 1, /* children inherit it */ + pinned : 1, /* must always be on PMU */ + exclusive : 1, /* only group on PMU */ + exclude_user : 1, /* don't count user */ + exclude_kernel : 1, /* ditto kernel */ + exclude_hv : 1, /* ditto hypervisor */ + exclude_idle : 1, /* don't count when idle */ + mmap : 1, /* include mmap data */ + comm : 1, /* include comm data */ + freq : 1, /* use freq, not period */ + inherit_stat : 1, /* per task counts */ + enable_on_exec : 1, /* next exec enables */ + task : 1, /* trace fork/exit */ + watermark : 1, /* wakeup_watermark */ + /* + * precise_ip: + * + * 0 - SAMPLE_IP can have arbitrary skid + * 1 - SAMPLE_IP must have constant skid + * 2 - SAMPLE_IP requested to have 0 skid + * 3 - SAMPLE_IP must have 0 skid + * + * See also PERF_RECORD_MISC_EXACT_IP + */ + precise_ip : 2, /* skid constraint */ + mmap_data : 1, /* non-exec mmap data */ + sample_id_all : 1, /* sample_type all events */ + + exclude_host : 1, /* don't count in host */ + exclude_guest : 1, /* don't count in guest */ + + exclude_callchain_kernel : 1, /* exclude kernel callchains */ + exclude_callchain_user : 1, /* exclude user callchains */ + mmap2 : 1, /* include mmap with inode data */ + comm_exec : 1, /* flag comm events that are due to an exec */ + use_clockid : 1, /* use @clockid for time fields */ + context_switch : 1, /* context switch data */ + write_backward : 1, /* write ring buffer from end to beginning */ + namespaces : 1, /* include namespaces data */ + ksymbol : 1, /* include ksymbol events */ + bpf_event : 1, /* include BPF events */ + aux_output : 1, /* generate AUX records instead of events */ + cgroup : 1, /* include cgroup events */ + text_poke : 1, /* include text poke events */ + build_id : 1, /* use build ID in mmap2 events */ + inherit_thread : 1, /* children only inherit if cloned with CLONE_THREAD */ + remove_on_exec : 1, /* event is removed from task on exec */ + sigtrap : 1, /* send synchronous SIGTRAP on event */ + defer_callchain: 1, /* request PERF_RECORD_CALLCHAIN_DEFERRED records */ + defer_output : 1, /* output PERF_RECORD_CALLCHAIN_DEFERRED records */ + __reserved_1 : 24; + + union { + __u32 wakeup_events; /* wake up every n events */ + __u32 wakeup_watermark; /* bytes before wakeup */ + }; + + __u32 bp_type; + union { + __u64 bp_addr; + __u64 kprobe_func; /* for perf_kprobe */ + __u64 uprobe_path; /* for perf_uprobe */ + __u64 config1; /* extension of config */ + }; + union { + __u64 bp_len; + __u64 kprobe_addr; /* when kprobe_func == NULL */ + __u64 probe_offset; /* for perf_[k,u]probe */ + __u64 config2; /* extension of config1 */ + }; + __u64 branch_sample_type; /* enum perf_branch_sample_type */ + + /* + * Defines set of user regs to dump on samples. + * See asm/perf_regs.h for details. + */ + __u64 sample_regs_user; + + /* + * Defines size of the user stack to dump on samples. + */ + __u32 sample_stack_user; + + __s32 clockid; + /* + * Defines set of regs to dump for each sample + * state captured on: + * - precise = 0: PMU interrupt + * - precise > 0: sampled instruction + * + * See asm/perf_regs.h for details. + */ + __u64 sample_regs_intr; + + /* + * Wakeup watermark for AUX area + */ + __u32 aux_watermark; + + /* + * Max number of frame pointers in a callchain, should be + * lower than /proc/sys/kernel/perf_event_max_stack. + * + * Max number of entries of branch stack should be lower + * than the hardware limit. + */ + __u16 sample_max_stack; + + __u16 __reserved_2; + __u32 aux_sample_size; + + union { + __u32 aux_action; + struct { + __u32 aux_start_paused : 1, /* start AUX area tracing paused */ + aux_pause : 1, /* on overflow, pause AUX area tracing */ + aux_resume : 1, /* on overflow, resume AUX area tracing */ + __reserved_3 : 29; + }; + }; + + /* + * User provided data if sigtrap=1, passed back to user via + * siginfo_t::si_perf_data, e.g. to permit user to identify the event. + * Note, siginfo_t::si_perf_data is long-sized, and sig_data will be + * truncated accordingly on 32 bit architectures. + */ + __u64 sig_data; + + __u64 config3; /* extension of config2 */ + __u64 config4; /* extension of config3 */ +}; + +/* + * Structure used by below PERF_EVENT_IOC_QUERY_BPF command + * to query BPF programs attached to the same perf tracepoint + * as the given perf event. + */ +struct perf_event_query_bpf { + /* + * The below ids array length + */ + __u32 ids_len; + /* + * Set by the kernel to indicate the number of + * available programs + */ + __u32 prog_cnt; + /* + * User provided buffer to store program ids + */ + __u32 ids[]; +}; + +/* + * Ioctls that can be done on a perf event fd: + */ +#define PERF_EVENT_IOC_ENABLE _IO ('$', 0) +#define PERF_EVENT_IOC_DISABLE _IO ('$', 1) +#define PERF_EVENT_IOC_REFRESH _IO ('$', 2) +#define PERF_EVENT_IOC_RESET _IO ('$', 3) +#define PERF_EVENT_IOC_PERIOD _IOW ('$', 4, __u64) +#define PERF_EVENT_IOC_SET_OUTPUT _IO ('$', 5) +#define PERF_EVENT_IOC_SET_FILTER _IOW ('$', 6, char *) +#define PERF_EVENT_IOC_ID _IOR ('$', 7, __u64 *) +#define PERF_EVENT_IOC_SET_BPF _IOW ('$', 8, __u32) +#define PERF_EVENT_IOC_PAUSE_OUTPUT _IOW ('$', 9, __u32) +#define PERF_EVENT_IOC_QUERY_BPF _IOWR('$', 10, struct perf_event_query_bpf *) +#define PERF_EVENT_IOC_MODIFY_ATTRIBUTES _IOW ('$', 11, struct perf_event_attr *) + +enum perf_event_ioc_flags { + PERF_IOC_FLAG_GROUP = 1U << 0, +}; + +/* + * Structure of the page that can be mapped via mmap + */ +struct perf_event_mmap_page { + __u32 version; /* version number of this structure */ + __u32 compat_version; /* lowest version this is compat with */ + + /* + * Bits needed to read the HW events in user-space. + * + * u32 seq, time_mult, time_shift, index, width; + * u64 count, enabled, running; + * u64 cyc, time_offset; + * s64 pmc = 0; + * + * do { + * seq = pc->lock; + * barrier() + * + * enabled = pc->time_enabled; + * running = pc->time_running; + * + * if (pc->cap_usr_time && enabled != running) { + * cyc = rdtsc(); + * time_offset = pc->time_offset; + * time_mult = pc->time_mult; + * time_shift = pc->time_shift; + * } + * + * index = pc->index; + * count = pc->offset; + * if (pc->cap_user_rdpmc && index) { + * width = pc->pmc_width; + * pmc = rdpmc(index - 1); + * } + * + * barrier(); + * } while (pc->lock != seq); + * + * NOTE: for obvious reason this only works on self-monitoring + * processes. + */ + __u32 lock; /* seqlock for synchronization */ + __u32 index; /* hardware event identifier */ + __s64 offset; /* add to hardware event value */ + __u64 time_enabled; /* time event active */ + __u64 time_running; /* time event on CPU */ + union { + __u64 capabilities; + struct { + __u64 cap_bit0 : 1, /* Always 0, deprecated, see commit 860f085b74e9 */ + cap_bit0_is_deprecated : 1, /* Always 1, signals that bit 0 is zero */ + + cap_user_rdpmc : 1, /* The RDPMC instruction can be used to read counts */ + cap_user_time : 1, /* The time_{shift,mult,offset} fields are used */ + cap_user_time_zero : 1, /* The time_zero field is used */ + cap_user_time_short : 1, /* the time_{cycle,mask} fields are used */ + cap_____res : 58; + }; + }; + + /* + * If cap_user_rdpmc this field provides the bit-width of the value + * read using the rdpmc() or equivalent instruction. This can be used + * to sign extend the result like: + * + * pmc <<= 64 - width; + * pmc >>= 64 - width; // signed shift right + * count += pmc; + */ + __u16 pmc_width; + + /* + * If cap_usr_time the below fields can be used to compute the time + * delta since time_enabled (in ns) using RDTSC or similar. + * + * u64 quot, rem; + * u64 delta; + * + * quot = (cyc >> time_shift); + * rem = cyc & (((u64)1 << time_shift) - 1); + * delta = time_offset + quot * time_mult + + * ((rem * time_mult) >> time_shift); + * + * Where time_offset,time_mult,time_shift and cyc are read in the + * seqcount loop described above. This delta can then be added to + * enabled and possible running (if index), improving the scaling: + * + * enabled += delta; + * if (index) + * running += delta; + * + * quot = count / running; + * rem = count % running; + * count = quot * enabled + (rem * enabled) / running; + */ + __u16 time_shift; + __u32 time_mult; + __u64 time_offset; + /* + * If cap_usr_time_zero, the hardware clock (e.g. TSC) can be calculated + * from sample timestamps. + * + * time = timestamp - time_zero; + * quot = time / time_mult; + * rem = time % time_mult; + * cyc = (quot << time_shift) + (rem << time_shift) / time_mult; + * + * And vice versa: + * + * quot = cyc >> time_shift; + * rem = cyc & (((u64)1 << time_shift) - 1); + * timestamp = time_zero + quot * time_mult + + * ((rem * time_mult) >> time_shift); + */ + __u64 time_zero; + + __u32 size; /* Header size up to __reserved[] fields. */ + __u32 __reserved_1; + + /* + * If cap_usr_time_short, the hardware clock is less than 64bit wide + * and we must compute the 'cyc' value, as used by cap_usr_time, as: + * + * cyc = time_cycles + ((cyc - time_cycles) & time_mask) + * + * NOTE: this form is explicitly chosen such that cap_usr_time_short + * is a correction on top of cap_usr_time, and code that doesn't + * know about cap_usr_time_short still works under the assumption + * the counter doesn't wrap. + */ + __u64 time_cycles; + __u64 time_mask; + + /* + * Hole for extension of the self monitor capabilities + */ + + __u8 __reserved[116*8]; /* align to 1k. */ + + /* + * Control data for the mmap() data buffer. + * + * User-space reading the @data_head value should issue an smp_rmb(), + * after reading this value. + * + * When the mapping is PROT_WRITE the @data_tail value should be + * written by user-space to reflect the last read data, after issuing + * an smp_mb() to separate the data read from the ->data_tail store. + * In this case the kernel will not over-write unread data. + * + * See perf_output_put_handle() for the data ordering. + * + * data_{offset,size} indicate the location and size of the perf record + * buffer within the mmapped area. + */ + __u64 data_head; /* head in the data section */ + __u64 data_tail; /* user-space written tail */ + __u64 data_offset; /* where the buffer starts */ + __u64 data_size; /* data buffer size */ + + /* + * AUX area is defined by aux_{offset,size} fields that should be set + * by the user-space, so that + * + * aux_offset >= data_offset + data_size + * + * prior to mmap()ing it. Size of the mmap()ed area should be aux_size. + * + * Ring buffer pointers aux_{head,tail} have the same semantics as + * data_{head,tail} and same ordering rules apply. + */ + __u64 aux_head; + __u64 aux_tail; + __u64 aux_offset; + __u64 aux_size; +}; + +/* + * The current state of perf_event_header::misc bits usage: + * ('|' used bit, '-' unused bit) + * + * 012 CDEF + * |||---------|||| + * + * Where: + * 0-2 CPUMODE_MASK + * + * C PROC_MAP_PARSE_TIMEOUT + * D MMAP_DATA / COMM_EXEC / FORK_EXEC / SWITCH_OUT + * E MMAP_BUILD_ID / EXACT_IP / SCHED_OUT_PREEMPT + * F (reserved) + */ + +#define PERF_RECORD_MISC_CPUMODE_MASK (7 << 0) +#define PERF_RECORD_MISC_CPUMODE_UNKNOWN (0 << 0) +#define PERF_RECORD_MISC_KERNEL (1 << 0) +#define PERF_RECORD_MISC_USER (2 << 0) +#define PERF_RECORD_MISC_HYPERVISOR (3 << 0) +#define PERF_RECORD_MISC_GUEST_KERNEL (4 << 0) +#define PERF_RECORD_MISC_GUEST_USER (5 << 0) + +/* + * Indicates that /proc/PID/maps parsing are truncated by time out. + */ +#define PERF_RECORD_MISC_PROC_MAP_PARSE_TIMEOUT (1 << 12) +/* + * Following PERF_RECORD_MISC_* are used on different + * events, so can reuse the same bit position: + * + * PERF_RECORD_MISC_MMAP_DATA - PERF_RECORD_MMAP* events + * PERF_RECORD_MISC_COMM_EXEC - PERF_RECORD_COMM event + * PERF_RECORD_MISC_FORK_EXEC - PERF_RECORD_FORK event (perf internal) + * PERF_RECORD_MISC_SWITCH_OUT - PERF_RECORD_SWITCH* events + */ +#define PERF_RECORD_MISC_MMAP_DATA (1 << 13) +#define PERF_RECORD_MISC_COMM_EXEC (1 << 13) +#define PERF_RECORD_MISC_FORK_EXEC (1 << 13) +#define PERF_RECORD_MISC_SWITCH_OUT (1 << 13) +/* + * These PERF_RECORD_MISC_* flags below are safely reused + * for the following events: + * + * PERF_RECORD_MISC_EXACT_IP - PERF_RECORD_SAMPLE of precise events + * PERF_RECORD_MISC_SWITCH_OUT_PREEMPT - PERF_RECORD_SWITCH* events + * PERF_RECORD_MISC_MMAP_BUILD_ID - PERF_RECORD_MMAP2 event + * + * + * PERF_RECORD_MISC_EXACT_IP: + * Indicates that the content of PERF_SAMPLE_IP points to + * the actual instruction that triggered the event. See also + * perf_event_attr::precise_ip. + * + * PERF_RECORD_MISC_SWITCH_OUT_PREEMPT: + * Indicates that thread was preempted in TASK_RUNNING state. + * + * PERF_RECORD_MISC_MMAP_BUILD_ID: + * Indicates that mmap2 event carries build ID data. + */ +#define PERF_RECORD_MISC_EXACT_IP (1 << 14) +#define PERF_RECORD_MISC_SWITCH_OUT_PREEMPT (1 << 14) +#define PERF_RECORD_MISC_MMAP_BUILD_ID (1 << 14) +/* + * Reserve the last bit to indicate some extended misc field + */ +#define PERF_RECORD_MISC_EXT_RESERVED (1 << 15) + +struct perf_event_header { + __u32 type; + __u16 misc; + __u16 size; +}; + +struct perf_ns_link_info { + __u64 dev; + __u64 ino; +}; + +enum { + NET_NS_INDEX = 0, + UTS_NS_INDEX = 1, + IPC_NS_INDEX = 2, + PID_NS_INDEX = 3, + USER_NS_INDEX = 4, + MNT_NS_INDEX = 5, + CGROUP_NS_INDEX = 6, + + NR_NAMESPACES, /* number of available namespaces */ +}; + +enum perf_event_type { + + /* + * If perf_event_attr.sample_id_all is set then all event types will + * have the sample_type selected fields related to where/when + * (identity) an event took place (TID, TIME, ID, STREAM_ID, CPU, + * IDENTIFIER) described in PERF_RECORD_SAMPLE below, it will be stashed + * just after the perf_event_header and the fields already present for + * the existing fields, i.e. at the end of the payload. That way a newer + * perf.data file will be supported by older perf tools, with these new + * optional fields being ignored. + * + * struct sample_id { + * { u32 pid, tid; } && PERF_SAMPLE_TID + * { u64 time; } && PERF_SAMPLE_TIME + * { u64 id; } && PERF_SAMPLE_ID + * { u64 stream_id;} && PERF_SAMPLE_STREAM_ID + * { u32 cpu, res; } && PERF_SAMPLE_CPU + * { u64 id; } && PERF_SAMPLE_IDENTIFIER + * } && perf_event_attr::sample_id_all + * + * Note that PERF_SAMPLE_IDENTIFIER duplicates PERF_SAMPLE_ID. The + * advantage of PERF_SAMPLE_IDENTIFIER is that its position is fixed + * relative to header.size. + */ + + /* + * The MMAP events record the PROT_EXEC mappings so that we can + * correlate user-space IPs to code. They have the following structure: + * + * struct { + * struct perf_event_header header; + * + * u32 pid, tid; + * u64 addr; + * u64 len; + * u64 pgoff; + * char filename[]; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_MMAP = 1, + + /* + * struct { + * struct perf_event_header header; + * u64 id; + * u64 lost; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_LOST = 2, + + /* + * struct { + * struct perf_event_header header; + * + * u32 pid, tid; + * char comm[]; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_COMM = 3, + + /* + * struct { + * struct perf_event_header header; + * u32 pid, ppid; + * u32 tid, ptid; + * u64 time; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_EXIT = 4, + + /* + * struct { + * struct perf_event_header header; + * u64 time; + * u64 id; + * u64 stream_id; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_THROTTLE = 5, + PERF_RECORD_UNTHROTTLE = 6, + + /* + * struct { + * struct perf_event_header header; + * u32 pid, ppid; + * u32 tid, ptid; + * u64 time; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_FORK = 7, + + /* + * struct { + * struct perf_event_header header; + * u32 pid, tid; + * + * struct read_format values; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_READ = 8, + + /* + * struct { + * struct perf_event_header header; + * + * # + * # Note that PERF_SAMPLE_IDENTIFIER duplicates PERF_SAMPLE_ID. + * # The advantage of PERF_SAMPLE_IDENTIFIER is that its position + * # is fixed relative to header. + * # + * + * { u64 id; } && PERF_SAMPLE_IDENTIFIER + * { u64 ip; } && PERF_SAMPLE_IP + * { u32 pid, tid; } && PERF_SAMPLE_TID + * { u64 time; } && PERF_SAMPLE_TIME + * { u64 addr; } && PERF_SAMPLE_ADDR + * { u64 id; } && PERF_SAMPLE_ID + * { u64 stream_id;} && PERF_SAMPLE_STREAM_ID + * { u32 cpu, res; } && PERF_SAMPLE_CPU + * { u64 period; } && PERF_SAMPLE_PERIOD + * + * { struct read_format values; } && PERF_SAMPLE_READ + * + * { u64 nr, + * u64 ips[nr]; } && PERF_SAMPLE_CALLCHAIN + * + * # + * # The RAW record below is opaque data wrt the ABI + * # + * # That is, the ABI doesn't make any promises wrt to + * # the stability of its content, it may vary depending + * # on event, hardware, kernel version and phase of + * # the moon. + * # + * # In other words, PERF_SAMPLE_RAW contents are not an ABI. + * # + * + * { u32 size; + * char data[size];}&& PERF_SAMPLE_RAW + * + * { u64 nr; + * { u64 hw_idx; } && PERF_SAMPLE_BRANCH_HW_INDEX + * { u64 from, to, flags } lbr[nr]; + * # + * # The format of the counters is decided by the + * # "branch_counter_nr" and "branch_counter_width", + * # which are defined in the ABI. + * # + * { u64 counters; } cntr[nr] && PERF_SAMPLE_BRANCH_COUNTERS + * } && PERF_SAMPLE_BRANCH_STACK + * + * { u64 abi; # enum perf_sample_regs_abi + * u64 regs[weight(mask)]; } && PERF_SAMPLE_REGS_USER + * + * { u64 size; + * char data[size]; + * u64 dyn_size; } && PERF_SAMPLE_STACK_USER + * + * { union perf_sample_weight + * { + * u64 full; && PERF_SAMPLE_WEIGHT + * #if defined(__LITTLE_ENDIAN_BITFIELD) + * struct { + * u32 var1_dw; + * u16 var2_w; + * u16 var3_w; + * } && PERF_SAMPLE_WEIGHT_STRUCT + * #elif defined(__BIG_ENDIAN_BITFIELD) + * struct { + * u16 var3_w; + * u16 var2_w; + * u32 var1_dw; + * } && PERF_SAMPLE_WEIGHT_STRUCT + * #endif + * } + * } + * { u64 data_src; } && PERF_SAMPLE_DATA_SRC + * { u64 transaction; } && PERF_SAMPLE_TRANSACTION + * { u64 abi; # enum perf_sample_regs_abi + * u64 regs[weight(mask)]; } && PERF_SAMPLE_REGS_INTR + * { u64 phys_addr;} && PERF_SAMPLE_PHYS_ADDR + * { u64 cgroup;} && PERF_SAMPLE_CGROUP + * { u64 data_page_size;} && PERF_SAMPLE_DATA_PAGE_SIZE + * { u64 code_page_size;} && PERF_SAMPLE_CODE_PAGE_SIZE + * { u64 size; + * char data[size]; } && PERF_SAMPLE_AUX + * }; + */ + PERF_RECORD_SAMPLE = 9, + + /* + * The MMAP2 records are an augmented version of MMAP, they add + * maj, min, ino numbers to be used to uniquely identify each mapping + * + * struct { + * struct perf_event_header header; + * + * u32 pid, tid; + * u64 addr; + * u64 len; + * u64 pgoff; + * union { + * struct { + * u32 maj; + * u32 min; + * u64 ino; + * u64 ino_generation; + * }; + * struct { + * u8 build_id_size; + * u8 __reserved_1; + * u16 __reserved_2; + * u8 build_id[20]; + * }; + * }; + * u32 prot, flags; + * char filename[]; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_MMAP2 = 10, + + /* + * Records that new data landed in the AUX buffer part. + * + * struct { + * struct perf_event_header header; + * + * u64 aux_offset; + * u64 aux_size; + * u64 flags; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_AUX = 11, + + /* + * Indicates that instruction trace has started + * + * struct { + * struct perf_event_header header; + * u32 pid; + * u32 tid; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_ITRACE_START = 12, + + /* + * Records the dropped/lost sample number. + * + * struct { + * struct perf_event_header header; + * + * u64 lost; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_LOST_SAMPLES = 13, + + /* + * Records a context switch in or out (flagged by + * PERF_RECORD_MISC_SWITCH_OUT). See also + * PERF_RECORD_SWITCH_CPU_WIDE. + * + * struct { + * struct perf_event_header header; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_SWITCH = 14, + + /* + * CPU-wide version of PERF_RECORD_SWITCH with next_prev_pid and + * next_prev_tid that are the next (switching out) or previous + * (switching in) pid/tid. + * + * struct { + * struct perf_event_header header; + * u32 next_prev_pid; + * u32 next_prev_tid; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_SWITCH_CPU_WIDE = 15, + + /* + * struct { + * struct perf_event_header header; + * u32 pid; + * u32 tid; + * u64 nr_namespaces; + * { u64 dev, inode; } [nr_namespaces]; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_NAMESPACES = 16, + + /* + * Record ksymbol register/unregister events: + * + * struct { + * struct perf_event_header header; + * u64 addr; + * u32 len; + * u16 ksym_type; + * u16 flags; + * char name[]; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_KSYMBOL = 17, + + /* + * Record BPF events: + * enum perf_bpf_event_type { + * PERF_BPF_EVENT_UNKNOWN = 0, + * PERF_BPF_EVENT_PROG_LOAD = 1, + * PERF_BPF_EVENT_PROG_UNLOAD = 2, + * }; + * + * struct { + * struct perf_event_header header; + * u16 type; + * u16 flags; + * u32 id; + * u8 tag[BPF_TAG_SIZE]; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_BPF_EVENT = 18, + + /* + * struct { + * struct perf_event_header header; + * u64 id; + * char path[]; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_CGROUP = 19, + + /* + * Records changes to kernel text i.e. self-modified code. 'old_len' is + * the number of old bytes, 'new_len' is the number of new bytes. Either + * 'old_len' or 'new_len' may be zero to indicate, for example, the + * addition or removal of a trampoline. 'bytes' contains the old bytes + * followed immediately by the new bytes. + * + * struct { + * struct perf_event_header header; + * u64 addr; + * u16 old_len; + * u16 new_len; + * u8 bytes[]; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_TEXT_POKE = 20, + + /* + * Data written to the AUX area by hardware due to aux_output, may need + * to be matched to the event by an architecture-specific hardware ID. + * This records the hardware ID, but requires sample_id to provide the + * event ID. e.g. Intel PT uses this record to disambiguate PEBS-via-PT + * records from multiple events. + * + * struct { + * struct perf_event_header header; + * u64 hw_id; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_AUX_OUTPUT_HW_ID = 21, + + /* + * This user callchain capture was deferred until shortly before + * returning to user space. Previous samples would have kernel + * callchains only and they need to be stitched with this to make full + * callchains. + * + * struct { + * struct perf_event_header header; + * u64 cookie; + * u64 nr; + * u64 ips[nr]; + * struct sample_id sample_id; + * }; + */ + PERF_RECORD_CALLCHAIN_DEFERRED = 22, + + PERF_RECORD_MAX, /* non-ABI */ +}; + +enum perf_record_ksymbol_type { + PERF_RECORD_KSYMBOL_TYPE_UNKNOWN = 0, + PERF_RECORD_KSYMBOL_TYPE_BPF = 1, + /* + * Out of line code such as kprobe-replaced instructions or optimized + * kprobes or ftrace trampolines. + */ + PERF_RECORD_KSYMBOL_TYPE_OOL = 2, + PERF_RECORD_KSYMBOL_TYPE_MAX /* non-ABI */ +}; + +#define PERF_RECORD_KSYMBOL_FLAGS_UNREGISTER (1 << 0) + +enum perf_bpf_event_type { + PERF_BPF_EVENT_UNKNOWN = 0, + PERF_BPF_EVENT_PROG_LOAD = 1, + PERF_BPF_EVENT_PROG_UNLOAD = 2, + PERF_BPF_EVENT_MAX, /* non-ABI */ +}; + +#define PERF_MAX_STACK_DEPTH 127 +#define PERF_MAX_CONTEXTS_PER_STACK 8 + +enum perf_callchain_context { + PERF_CONTEXT_HV = (__u64)-32, + PERF_CONTEXT_KERNEL = (__u64)-128, + PERF_CONTEXT_USER = (__u64)-512, + PERF_CONTEXT_USER_DEFERRED = (__u64)-640, + + PERF_CONTEXT_GUEST = (__u64)-2048, + PERF_CONTEXT_GUEST_KERNEL = (__u64)-2176, + PERF_CONTEXT_GUEST_USER = (__u64)-2560, + + PERF_CONTEXT_MAX = (__u64)-4095, +}; + +/** + * PERF_RECORD_AUX::flags bits + */ +#define PERF_AUX_FLAG_TRUNCATED 0x0001 /* Record was truncated to fit */ +#define PERF_AUX_FLAG_OVERWRITE 0x0002 /* Snapshot from overwrite mode */ +#define PERF_AUX_FLAG_PARTIAL 0x0004 /* Record contains gaps */ +#define PERF_AUX_FLAG_COLLISION 0x0008 /* Sample collided with another */ +#define PERF_AUX_FLAG_PMU_FORMAT_TYPE_MASK 0xff00 /* PMU specific trace format type */ + +/* CoreSight PMU AUX buffer formats */ +#define PERF_AUX_FLAG_CORESIGHT_FORMAT_CORESIGHT 0x0000 /* Default for backward compatibility */ +#define PERF_AUX_FLAG_CORESIGHT_FORMAT_RAW 0x0100 /* Raw format of the source */ + +#define PERF_FLAG_FD_NO_GROUP (1UL << 0) +#define PERF_FLAG_FD_OUTPUT (1UL << 1) +#define PERF_FLAG_PID_CGROUP (1UL << 2) /* pid=cgroup ID, per-CPU mode only */ +#define PERF_FLAG_FD_CLOEXEC (1UL << 3) /* O_CLOEXEC */ + +#if defined(__LITTLE_ENDIAN_BITFIELD) +union perf_mem_data_src { + __u64 val; + struct { + __u64 mem_op : 5, /* Type of opcode */ + mem_lvl : 14, /* Memory hierarchy level */ + mem_snoop : 5, /* Snoop mode */ + mem_lock : 2, /* Lock instr */ + mem_dtlb : 7, /* TLB access */ + mem_lvl_num : 4, /* Memory hierarchy level number */ + mem_remote : 1, /* Remote */ + mem_snoopx : 2, /* Snoop mode, ext */ + mem_blk : 3, /* Access blocked */ + mem_hops : 3, /* Hop level */ + mem_rsvd : 18; + }; +}; +#elif defined(__BIG_ENDIAN_BITFIELD) +union perf_mem_data_src { + __u64 val; + struct { + __u64 mem_rsvd : 18, + mem_hops : 3, /* Hop level */ + mem_blk : 3, /* Access blocked */ + mem_snoopx : 2, /* Snoop mode, ext */ + mem_remote : 1, /* Remote */ + mem_lvl_num : 4, /* Memory hierarchy level number */ + mem_dtlb : 7, /* TLB access */ + mem_lock : 2, /* Lock instr */ + mem_snoop : 5, /* Snoop mode */ + mem_lvl : 14, /* Memory hierarchy level */ + mem_op : 5; /* Type of opcode */ + }; +}; +#else +# error "Unknown endianness" +#endif + +/* Type of memory opcode: */ +#define PERF_MEM_OP_NA 0x0001 /* Not available */ +#define PERF_MEM_OP_LOAD 0x0002 /* Load instruction */ +#define PERF_MEM_OP_STORE 0x0004 /* Store instruction */ +#define PERF_MEM_OP_PFETCH 0x0008 /* Prefetch */ +#define PERF_MEM_OP_EXEC 0x0010 /* Code (execution) */ +#define PERF_MEM_OP_SHIFT 0 + +/* + * The PERF_MEM_LVL_* namespace is being deprecated to some extent in + * favour of newer composite PERF_MEM_{LVLNUM_,REMOTE_,SNOOPX_} fields. + * We support this namespace in order to not break defined ABIs. + * + * Memory hierarchy (memory level, hit or miss) + */ +#define PERF_MEM_LVL_NA 0x0001 /* Not available */ +#define PERF_MEM_LVL_HIT 0x0002 /* Hit level */ +#define PERF_MEM_LVL_MISS 0x0004 /* Miss level */ +#define PERF_MEM_LVL_L1 0x0008 /* L1 */ +#define PERF_MEM_LVL_LFB 0x0010 /* Line Fill Buffer */ +#define PERF_MEM_LVL_L2 0x0020 /* L2 */ +#define PERF_MEM_LVL_L3 0x0040 /* L3 */ +#define PERF_MEM_LVL_LOC_RAM 0x0080 /* Local DRAM */ +#define PERF_MEM_LVL_REM_RAM1 0x0100 /* Remote DRAM (1 hop) */ +#define PERF_MEM_LVL_REM_RAM2 0x0200 /* Remote DRAM (2 hops) */ +#define PERF_MEM_LVL_REM_CCE1 0x0400 /* Remote Cache (1 hop) */ +#define PERF_MEM_LVL_REM_CCE2 0x0800 /* Remote Cache (2 hops) */ +#define PERF_MEM_LVL_IO 0x1000 /* I/O memory */ +#define PERF_MEM_LVL_UNC 0x2000 /* Uncached memory */ +#define PERF_MEM_LVL_SHIFT 5 + +#define PERF_MEM_REMOTE_REMOTE 0x0001 /* Remote */ +#define PERF_MEM_REMOTE_SHIFT 37 + +#define PERF_MEM_LVLNUM_L1 0x0001 /* L1 */ +#define PERF_MEM_LVLNUM_L2 0x0002 /* L2 */ +#define PERF_MEM_LVLNUM_L3 0x0003 /* L3 */ +#define PERF_MEM_LVLNUM_L4 0x0004 /* L4 */ +#define PERF_MEM_LVLNUM_L2_MHB 0x0005 /* L2 Miss Handling Buffer */ +#define PERF_MEM_LVLNUM_MSC 0x0006 /* Memory-side Cache */ +/* 0x007 available */ +#define PERF_MEM_LVLNUM_UNC 0x0008 /* Uncached */ +#define PERF_MEM_LVLNUM_CXL 0x0009 /* CXL */ +#define PERF_MEM_LVLNUM_IO 0x000a /* I/O */ +#define PERF_MEM_LVLNUM_ANY_CACHE 0x000b /* Any cache */ +#define PERF_MEM_LVLNUM_LFB 0x000c /* LFB / L1 Miss Handling Buffer */ +#define PERF_MEM_LVLNUM_RAM 0x000d /* RAM */ +#define PERF_MEM_LVLNUM_PMEM 0x000e /* PMEM */ +#define PERF_MEM_LVLNUM_NA 0x000f /* N/A */ + +#define PERF_MEM_LVLNUM_SHIFT 33 + +/* Snoop mode */ +#define PERF_MEM_SNOOP_NA 0x0001 /* Not available */ +#define PERF_MEM_SNOOP_NONE 0x0002 /* No snoop */ +#define PERF_MEM_SNOOP_HIT 0x0004 /* Snoop hit */ +#define PERF_MEM_SNOOP_MISS 0x0008 /* Snoop miss */ +#define PERF_MEM_SNOOP_HITM 0x0010 /* Snoop hit modified */ +#define PERF_MEM_SNOOP_SHIFT 19 + +#define PERF_MEM_SNOOPX_FWD 0x0001 /* Forward */ +#define PERF_MEM_SNOOPX_PEER 0x0002 /* Transfer from peer */ +#define PERF_MEM_SNOOPX_SHIFT 38 + +/* Locked instruction */ +#define PERF_MEM_LOCK_NA 0x0001 /* Not available */ +#define PERF_MEM_LOCK_LOCKED 0x0002 /* Locked transaction */ +#define PERF_MEM_LOCK_SHIFT 24 + +/* TLB access */ +#define PERF_MEM_TLB_NA 0x0001 /* Not available */ +#define PERF_MEM_TLB_HIT 0x0002 /* Hit level */ +#define PERF_MEM_TLB_MISS 0x0004 /* Miss level */ +#define PERF_MEM_TLB_L1 0x0008 /* L1 */ +#define PERF_MEM_TLB_L2 0x0010 /* L2 */ +#define PERF_MEM_TLB_WK 0x0020 /* Hardware Walker*/ +#define PERF_MEM_TLB_OS 0x0040 /* OS fault handler */ +#define PERF_MEM_TLB_SHIFT 26 + +/* Access blocked */ +#define PERF_MEM_BLK_NA 0x0001 /* Not available */ +#define PERF_MEM_BLK_DATA 0x0002 /* Data could not be forwarded */ +#define PERF_MEM_BLK_ADDR 0x0004 /* Address conflict */ +#define PERF_MEM_BLK_SHIFT 40 + +/* Hop level */ +#define PERF_MEM_HOPS_0 0x0001 /* Remote core, same node */ +#define PERF_MEM_HOPS_1 0x0002 /* Remote node, same socket */ +#define PERF_MEM_HOPS_2 0x0003 /* Remote socket, same board */ +#define PERF_MEM_HOPS_3 0x0004 /* Remote board */ +/* 5-7 available */ +#define PERF_MEM_HOPS_SHIFT 43 + +#define PERF_MEM_S(a, s) \ + (((__u64)PERF_MEM_##a##_##s) << PERF_MEM_##a##_SHIFT) + +/* + * Layout of single taken branch records: + * + * from: source instruction (may not always be a branch insn) + * to: branch target + * mispred: branch target was mispredicted + * predicted: branch target was predicted + * + * support for mispred, predicted is optional. In case it + * is not supported mispred = predicted = 0. + * + * in_tx: running in a hardware transaction + * abort: aborting a hardware transaction + * cycles: cycles from last branch (or 0 if not supported) + * type: branch type + * spec: branch speculation info (or 0 if not supported) + */ +struct perf_branch_entry { + __u64 from; + __u64 to; + __u64 mispred : 1, /* target mispredicted */ + predicted : 1, /* target predicted */ + in_tx : 1, /* in transaction */ + abort : 1, /* transaction abort */ + cycles : 16, /* cycle count to last branch */ + type : 4, /* branch type */ + spec : 2, /* branch speculation info */ + new_type : 4, /* additional branch type */ + priv : 3, /* privilege level */ + reserved : 31; +}; + +/* Size of used info bits in struct perf_branch_entry */ +#define PERF_BRANCH_ENTRY_INFO_BITS_MAX 33 + +union perf_sample_weight { + __u64 full; +#if defined(__LITTLE_ENDIAN_BITFIELD) + struct { + __u32 var1_dw; + __u16 var2_w; + __u16 var3_w; + }; +#elif defined(__BIG_ENDIAN_BITFIELD) + struct { + __u16 var3_w; + __u16 var2_w; + __u32 var1_dw; + }; +#else +# error "Unknown endianness" +#endif +}; + +#endif /* _UAPI_LINUX_PERF_EVENT_H */ diff --git a/tools/include/uapi/linux/pkt_cls.h b/tools/include/uapi/linux/pkt_cls.h new file mode 100644 index 000000000000..bd4b227ab4ba --- /dev/null +++ b/tools/include/uapi/linux/pkt_cls.h @@ -0,0 +1,565 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __LINUX_PKT_CLS_H +#define __LINUX_PKT_CLS_H + +#include <linux/types.h> +#include <linux/pkt_sched.h> + +#define TC_COOKIE_MAX_SIZE 16 + +/* Action attributes */ +enum { + TCA_ACT_UNSPEC, + TCA_ACT_KIND, + TCA_ACT_OPTIONS, + TCA_ACT_INDEX, + TCA_ACT_STATS, + TCA_ACT_PAD, + TCA_ACT_COOKIE, + __TCA_ACT_MAX +}; + +#define TCA_ACT_MAX __TCA_ACT_MAX +#define TCA_OLD_COMPAT (TCA_ACT_MAX+1) +#define TCA_ACT_MAX_PRIO 32 +#define TCA_ACT_BIND 1 +#define TCA_ACT_NOBIND 0 +#define TCA_ACT_UNBIND 1 +#define TCA_ACT_NOUNBIND 0 +#define TCA_ACT_REPLACE 1 +#define TCA_ACT_NOREPLACE 0 + +#define TC_ACT_UNSPEC (-1) +#define TC_ACT_OK 0 +#define TC_ACT_RECLASSIFY 1 +#define TC_ACT_SHOT 2 +#define TC_ACT_PIPE 3 +#define TC_ACT_STOLEN 4 +#define TC_ACT_QUEUED 5 +#define TC_ACT_REPEAT 6 +#define TC_ACT_REDIRECT 7 +#define TC_ACT_TRAP 8 /* For hw path, this means "trap to cpu" + * and don't further process the frame + * in hardware. For sw path, this is + * equivalent of TC_ACT_STOLEN - drop + * the skb and act like everything + * is alright. + */ +#define TC_ACT_VALUE_MAX TC_ACT_TRAP + +/* There is a special kind of actions called "extended actions", + * which need a value parameter. These have a local opcode located in + * the highest nibble, starting from 1. The rest of the bits + * are used to carry the value. These two parts together make + * a combined opcode. + */ +#define __TC_ACT_EXT_SHIFT 28 +#define __TC_ACT_EXT(local) ((local) << __TC_ACT_EXT_SHIFT) +#define TC_ACT_EXT_VAL_MASK ((1 << __TC_ACT_EXT_SHIFT) - 1) +#define TC_ACT_EXT_OPCODE(combined) ((combined) & (~TC_ACT_EXT_VAL_MASK)) +#define TC_ACT_EXT_CMP(combined, opcode) (TC_ACT_EXT_OPCODE(combined) == opcode) + +#define TC_ACT_JUMP __TC_ACT_EXT(1) +#define TC_ACT_GOTO_CHAIN __TC_ACT_EXT(2) +#define TC_ACT_EXT_OPCODE_MAX TC_ACT_GOTO_CHAIN + +/* Action type identifiers*/ +enum { + TCA_ID_UNSPEC=0, + TCA_ID_POLICE=1, + /* other actions go here */ + __TCA_ID_MAX=255 +}; + +#define TCA_ID_MAX __TCA_ID_MAX + +struct tc_police { + __u32 index; + int action; +#define TC_POLICE_UNSPEC TC_ACT_UNSPEC +#define TC_POLICE_OK TC_ACT_OK +#define TC_POLICE_RECLASSIFY TC_ACT_RECLASSIFY +#define TC_POLICE_SHOT TC_ACT_SHOT +#define TC_POLICE_PIPE TC_ACT_PIPE + + __u32 limit; + __u32 burst; + __u32 mtu; + struct tc_ratespec rate; + struct tc_ratespec peakrate; + int refcnt; + int bindcnt; + __u32 capab; +}; + +struct tcf_t { + __u64 install; + __u64 lastuse; + __u64 expires; + __u64 firstuse; +}; + +struct tc_cnt { + int refcnt; + int bindcnt; +}; + +#define tc_gen \ + __u32 index; \ + __u32 capab; \ + int action; \ + int refcnt; \ + int bindcnt + +enum { + TCA_POLICE_UNSPEC, + TCA_POLICE_TBF, + TCA_POLICE_RATE, + TCA_POLICE_PEAKRATE, + TCA_POLICE_AVRATE, + TCA_POLICE_RESULT, + TCA_POLICE_TM, + TCA_POLICE_PAD, + __TCA_POLICE_MAX +#define TCA_POLICE_RESULT TCA_POLICE_RESULT +}; + +#define TCA_POLICE_MAX (__TCA_POLICE_MAX - 1) + +/* tca flags definitions */ +#define TCA_CLS_FLAGS_SKIP_HW (1 << 0) /* don't offload filter to HW */ +#define TCA_CLS_FLAGS_SKIP_SW (1 << 1) /* don't use filter in SW */ +#define TCA_CLS_FLAGS_IN_HW (1 << 2) /* filter is offloaded to HW */ +#define TCA_CLS_FLAGS_NOT_IN_HW (1 << 3) /* filter isn't offloaded to HW */ +#define TCA_CLS_FLAGS_VERBOSE (1 << 4) /* verbose logging */ + +/* U32 filters */ + +#define TC_U32_HTID(h) ((h)&0xFFF00000) +#define TC_U32_USERHTID(h) (TC_U32_HTID(h)>>20) +#define TC_U32_HASH(h) (((h)>>12)&0xFF) +#define TC_U32_NODE(h) ((h)&0xFFF) +#define TC_U32_KEY(h) ((h)&0xFFFFF) +#define TC_U32_UNSPEC 0 +#define TC_U32_ROOT (0xFFF00000) + +enum { + TCA_U32_UNSPEC, + TCA_U32_CLASSID, + TCA_U32_HASH, + TCA_U32_LINK, + TCA_U32_DIVISOR, + TCA_U32_SEL, + TCA_U32_POLICE, + TCA_U32_ACT, + TCA_U32_INDEV, + TCA_U32_PCNT, + TCA_U32_MARK, + TCA_U32_FLAGS, + TCA_U32_PAD, + __TCA_U32_MAX +}; + +#define TCA_U32_MAX (__TCA_U32_MAX - 1) + +struct tc_u32_key { + __be32 mask; + __be32 val; + int off; + int offmask; +}; + +struct tc_u32_sel { + unsigned char flags; + unsigned char offshift; + unsigned char nkeys; + + __be16 offmask; + __u16 off; + short offoff; + + short hoff; + __be32 hmask; + struct tc_u32_key keys[]; +}; + +struct tc_u32_mark { + __u32 val; + __u32 mask; + __u32 success; +}; + +struct tc_u32_pcnt { + __u64 rcnt; + __u64 rhit; + __u64 kcnts[]; +}; + +/* Flags */ + +#define TC_U32_TERMINAL 1 +#define TC_U32_OFFSET 2 +#define TC_U32_VAROFFSET 4 +#define TC_U32_EAT 8 + +#define TC_U32_MAXDEPTH 8 + +/* ROUTE filter */ + +enum { + TCA_ROUTE4_UNSPEC, + TCA_ROUTE4_CLASSID, + TCA_ROUTE4_TO, + TCA_ROUTE4_FROM, + TCA_ROUTE4_IIF, + TCA_ROUTE4_POLICE, + TCA_ROUTE4_ACT, + __TCA_ROUTE4_MAX +}; + +#define TCA_ROUTE4_MAX (__TCA_ROUTE4_MAX - 1) + + +/* FW filter */ + +enum { + TCA_FW_UNSPEC, + TCA_FW_CLASSID, + TCA_FW_POLICE, + TCA_FW_INDEV, + TCA_FW_ACT, /* used by CONFIG_NET_CLS_ACT */ + TCA_FW_MASK, + __TCA_FW_MAX +}; + +#define TCA_FW_MAX (__TCA_FW_MAX - 1) + +/* Flow filter */ + +enum { + FLOW_KEY_SRC, + FLOW_KEY_DST, + FLOW_KEY_PROTO, + FLOW_KEY_PROTO_SRC, + FLOW_KEY_PROTO_DST, + FLOW_KEY_IIF, + FLOW_KEY_PRIORITY, + FLOW_KEY_MARK, + FLOW_KEY_NFCT, + FLOW_KEY_NFCT_SRC, + FLOW_KEY_NFCT_DST, + FLOW_KEY_NFCT_PROTO_SRC, + FLOW_KEY_NFCT_PROTO_DST, + FLOW_KEY_RTCLASSID, + FLOW_KEY_SKUID, + FLOW_KEY_SKGID, + FLOW_KEY_VLAN_TAG, + FLOW_KEY_RXHASH, + __FLOW_KEY_MAX, +}; + +#define FLOW_KEY_MAX (__FLOW_KEY_MAX - 1) + +enum { + FLOW_MODE_MAP, + FLOW_MODE_HASH, +}; + +enum { + TCA_FLOW_UNSPEC, + TCA_FLOW_KEYS, + TCA_FLOW_MODE, + TCA_FLOW_BASECLASS, + TCA_FLOW_RSHIFT, + TCA_FLOW_ADDEND, + TCA_FLOW_MASK, + TCA_FLOW_XOR, + TCA_FLOW_DIVISOR, + TCA_FLOW_ACT, + TCA_FLOW_POLICE, + TCA_FLOW_EMATCHES, + TCA_FLOW_PERTURB, + __TCA_FLOW_MAX +}; + +#define TCA_FLOW_MAX (__TCA_FLOW_MAX - 1) + +/* Basic filter */ + +enum { + TCA_BASIC_UNSPEC, + TCA_BASIC_CLASSID, + TCA_BASIC_EMATCHES, + TCA_BASIC_ACT, + TCA_BASIC_POLICE, + __TCA_BASIC_MAX +}; + +#define TCA_BASIC_MAX (__TCA_BASIC_MAX - 1) + + +/* Cgroup classifier */ + +enum { + TCA_CGROUP_UNSPEC, + TCA_CGROUP_ACT, + TCA_CGROUP_POLICE, + TCA_CGROUP_EMATCHES, + __TCA_CGROUP_MAX, +}; + +#define TCA_CGROUP_MAX (__TCA_CGROUP_MAX - 1) + +/* BPF classifier */ + +#define TCA_BPF_FLAG_ACT_DIRECT (1 << 0) + +enum { + TCA_BPF_UNSPEC, + TCA_BPF_ACT, + TCA_BPF_POLICE, + TCA_BPF_CLASSID, + TCA_BPF_OPS_LEN, + TCA_BPF_OPS, + TCA_BPF_FD, + TCA_BPF_NAME, + TCA_BPF_FLAGS, + TCA_BPF_FLAGS_GEN, + TCA_BPF_TAG, + TCA_BPF_ID, + __TCA_BPF_MAX, +}; + +#define TCA_BPF_MAX (__TCA_BPF_MAX - 1) + +/* Flower classifier */ + +enum { + TCA_FLOWER_UNSPEC, + TCA_FLOWER_CLASSID, + TCA_FLOWER_INDEV, + TCA_FLOWER_ACT, + TCA_FLOWER_KEY_ETH_DST, /* ETH_ALEN */ + TCA_FLOWER_KEY_ETH_DST_MASK, /* ETH_ALEN */ + TCA_FLOWER_KEY_ETH_SRC, /* ETH_ALEN */ + TCA_FLOWER_KEY_ETH_SRC_MASK, /* ETH_ALEN */ + TCA_FLOWER_KEY_ETH_TYPE, /* be16 */ + TCA_FLOWER_KEY_IP_PROTO, /* u8 */ + TCA_FLOWER_KEY_IPV4_SRC, /* be32 */ + TCA_FLOWER_KEY_IPV4_SRC_MASK, /* be32 */ + TCA_FLOWER_KEY_IPV4_DST, /* be32 */ + TCA_FLOWER_KEY_IPV4_DST_MASK, /* be32 */ + TCA_FLOWER_KEY_IPV6_SRC, /* struct in6_addr */ + TCA_FLOWER_KEY_IPV6_SRC_MASK, /* struct in6_addr */ + TCA_FLOWER_KEY_IPV6_DST, /* struct in6_addr */ + TCA_FLOWER_KEY_IPV6_DST_MASK, /* struct in6_addr */ + TCA_FLOWER_KEY_TCP_SRC, /* be16 */ + TCA_FLOWER_KEY_TCP_DST, /* be16 */ + TCA_FLOWER_KEY_UDP_SRC, /* be16 */ + TCA_FLOWER_KEY_UDP_DST, /* be16 */ + + TCA_FLOWER_FLAGS, + TCA_FLOWER_KEY_VLAN_ID, /* be16 */ + TCA_FLOWER_KEY_VLAN_PRIO, /* u8 */ + TCA_FLOWER_KEY_VLAN_ETH_TYPE, /* be16 */ + + TCA_FLOWER_KEY_ENC_KEY_ID, /* be32 */ + TCA_FLOWER_KEY_ENC_IPV4_SRC, /* be32 */ + TCA_FLOWER_KEY_ENC_IPV4_SRC_MASK,/* be32 */ + TCA_FLOWER_KEY_ENC_IPV4_DST, /* be32 */ + TCA_FLOWER_KEY_ENC_IPV4_DST_MASK,/* be32 */ + TCA_FLOWER_KEY_ENC_IPV6_SRC, /* struct in6_addr */ + TCA_FLOWER_KEY_ENC_IPV6_SRC_MASK,/* struct in6_addr */ + TCA_FLOWER_KEY_ENC_IPV6_DST, /* struct in6_addr */ + TCA_FLOWER_KEY_ENC_IPV6_DST_MASK,/* struct in6_addr */ + + TCA_FLOWER_KEY_TCP_SRC_MASK, /* be16 */ + TCA_FLOWER_KEY_TCP_DST_MASK, /* be16 */ + TCA_FLOWER_KEY_UDP_SRC_MASK, /* be16 */ + TCA_FLOWER_KEY_UDP_DST_MASK, /* be16 */ + TCA_FLOWER_KEY_SCTP_SRC_MASK, /* be16 */ + TCA_FLOWER_KEY_SCTP_DST_MASK, /* be16 */ + + TCA_FLOWER_KEY_SCTP_SRC, /* be16 */ + TCA_FLOWER_KEY_SCTP_DST, /* be16 */ + + TCA_FLOWER_KEY_ENC_UDP_SRC_PORT, /* be16 */ + TCA_FLOWER_KEY_ENC_UDP_SRC_PORT_MASK, /* be16 */ + TCA_FLOWER_KEY_ENC_UDP_DST_PORT, /* be16 */ + TCA_FLOWER_KEY_ENC_UDP_DST_PORT_MASK, /* be16 */ + + TCA_FLOWER_KEY_FLAGS, /* be32 */ + TCA_FLOWER_KEY_FLAGS_MASK, /* be32 */ + + TCA_FLOWER_KEY_ICMPV4_CODE, /* u8 */ + TCA_FLOWER_KEY_ICMPV4_CODE_MASK,/* u8 */ + TCA_FLOWER_KEY_ICMPV4_TYPE, /* u8 */ + TCA_FLOWER_KEY_ICMPV4_TYPE_MASK,/* u8 */ + TCA_FLOWER_KEY_ICMPV6_CODE, /* u8 */ + TCA_FLOWER_KEY_ICMPV6_CODE_MASK,/* u8 */ + TCA_FLOWER_KEY_ICMPV6_TYPE, /* u8 */ + TCA_FLOWER_KEY_ICMPV6_TYPE_MASK,/* u8 */ + + TCA_FLOWER_KEY_ARP_SIP, /* be32 */ + TCA_FLOWER_KEY_ARP_SIP_MASK, /* be32 */ + TCA_FLOWER_KEY_ARP_TIP, /* be32 */ + TCA_FLOWER_KEY_ARP_TIP_MASK, /* be32 */ + TCA_FLOWER_KEY_ARP_OP, /* u8 */ + TCA_FLOWER_KEY_ARP_OP_MASK, /* u8 */ + TCA_FLOWER_KEY_ARP_SHA, /* ETH_ALEN */ + TCA_FLOWER_KEY_ARP_SHA_MASK, /* ETH_ALEN */ + TCA_FLOWER_KEY_ARP_THA, /* ETH_ALEN */ + TCA_FLOWER_KEY_ARP_THA_MASK, /* ETH_ALEN */ + + TCA_FLOWER_KEY_MPLS_TTL, /* u8 - 8 bits */ + TCA_FLOWER_KEY_MPLS_BOS, /* u8 - 1 bit */ + TCA_FLOWER_KEY_MPLS_TC, /* u8 - 3 bits */ + TCA_FLOWER_KEY_MPLS_LABEL, /* be32 - 20 bits */ + + TCA_FLOWER_KEY_TCP_FLAGS, /* be16 */ + TCA_FLOWER_KEY_TCP_FLAGS_MASK, /* be16 */ + + TCA_FLOWER_KEY_IP_TOS, /* u8 */ + TCA_FLOWER_KEY_IP_TOS_MASK, /* u8 */ + TCA_FLOWER_KEY_IP_TTL, /* u8 */ + TCA_FLOWER_KEY_IP_TTL_MASK, /* u8 */ + + TCA_FLOWER_KEY_CVLAN_ID, /* be16 */ + TCA_FLOWER_KEY_CVLAN_PRIO, /* u8 */ + TCA_FLOWER_KEY_CVLAN_ETH_TYPE, /* be16 */ + + TCA_FLOWER_KEY_ENC_IP_TOS, /* u8 */ + TCA_FLOWER_KEY_ENC_IP_TOS_MASK, /* u8 */ + TCA_FLOWER_KEY_ENC_IP_TTL, /* u8 */ + TCA_FLOWER_KEY_ENC_IP_TTL_MASK, /* u8 */ + + TCA_FLOWER_KEY_ENC_OPTS, + TCA_FLOWER_KEY_ENC_OPTS_MASK, + + TCA_FLOWER_IN_HW_COUNT, + + __TCA_FLOWER_MAX, +}; + +#define TCA_FLOWER_MAX (__TCA_FLOWER_MAX - 1) + +enum { + TCA_FLOWER_KEY_ENC_OPTS_UNSPEC, + TCA_FLOWER_KEY_ENC_OPTS_GENEVE, /* Nested + * TCA_FLOWER_KEY_ENC_OPT_GENEVE_ + * attributes + */ + __TCA_FLOWER_KEY_ENC_OPTS_MAX, +}; + +#define TCA_FLOWER_KEY_ENC_OPTS_MAX (__TCA_FLOWER_KEY_ENC_OPTS_MAX - 1) + +enum { + TCA_FLOWER_KEY_ENC_OPT_GENEVE_UNSPEC, + TCA_FLOWER_KEY_ENC_OPT_GENEVE_CLASS, /* u16 */ + TCA_FLOWER_KEY_ENC_OPT_GENEVE_TYPE, /* u8 */ + TCA_FLOWER_KEY_ENC_OPT_GENEVE_DATA, /* 4 to 128 bytes */ + + __TCA_FLOWER_KEY_ENC_OPT_GENEVE_MAX, +}; + +#define TCA_FLOWER_KEY_ENC_OPT_GENEVE_MAX \ + (__TCA_FLOWER_KEY_ENC_OPT_GENEVE_MAX - 1) + +enum { + TCA_FLOWER_KEY_FLAGS_IS_FRAGMENT = (1 << 0), + TCA_FLOWER_KEY_FLAGS_FRAG_IS_FIRST = (1 << 1), +}; + +/* Match-all classifier */ + +enum { + TCA_MATCHALL_UNSPEC, + TCA_MATCHALL_CLASSID, + TCA_MATCHALL_ACT, + TCA_MATCHALL_FLAGS, + __TCA_MATCHALL_MAX, +}; + +#define TCA_MATCHALL_MAX (__TCA_MATCHALL_MAX - 1) + +/* Extended Matches */ + +struct tcf_ematch_tree_hdr { + __u16 nmatches; + __u16 progid; +}; + +enum { + TCA_EMATCH_TREE_UNSPEC, + TCA_EMATCH_TREE_HDR, + TCA_EMATCH_TREE_LIST, + __TCA_EMATCH_TREE_MAX +}; +#define TCA_EMATCH_TREE_MAX (__TCA_EMATCH_TREE_MAX - 1) + +struct tcf_ematch_hdr { + __u16 matchid; + __u16 kind; + __u16 flags; + __u16 pad; /* currently unused */ +}; + +/* 0 1 + * 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 + * +-----------------------+-+-+---+ + * | Unused |S|I| R | + * +-----------------------+-+-+---+ + * + * R(2) ::= relation to next ematch + * where: 0 0 END (last ematch) + * 0 1 AND + * 1 0 OR + * 1 1 Unused (invalid) + * I(1) ::= invert result + * S(1) ::= simple payload + */ +#define TCF_EM_REL_END 0 +#define TCF_EM_REL_AND (1<<0) +#define TCF_EM_REL_OR (1<<1) +#define TCF_EM_INVERT (1<<2) +#define TCF_EM_SIMPLE (1<<3) + +#define TCF_EM_REL_MASK 3 +#define TCF_EM_REL_VALID(v) (((v) & TCF_EM_REL_MASK) != TCF_EM_REL_MASK) + +enum { + TCF_LAYER_LINK, + TCF_LAYER_NETWORK, + TCF_LAYER_TRANSPORT, + __TCF_LAYER_MAX +}; +#define TCF_LAYER_MAX (__TCF_LAYER_MAX - 1) + +/* Ematch type assignments + * 1..32767 Reserved for ematches inside kernel tree + * 32768..65535 Free to use, not reliable + */ +#define TCF_EM_CONTAINER 0 +#define TCF_EM_CMP 1 +#define TCF_EM_NBYTE 2 +#define TCF_EM_U32 3 +#define TCF_EM_META 4 +#define TCF_EM_TEXT 5 +#define TCF_EM_VLAN 6 +#define TCF_EM_CANID 7 +#define TCF_EM_IPSET 8 +#define TCF_EM_IPT 9 +#define TCF_EM_MAX 9 + +enum { + TCF_EM_PROG_TC +}; + +enum { + TCF_EM_OPND_EQ, + TCF_EM_OPND_GT, + TCF_EM_OPND_LT +}; + +#endif diff --git a/tools/include/uapi/linux/pkt_sched.h b/tools/include/uapi/linux/pkt_sched.h new file mode 100644 index 000000000000..587481a19433 --- /dev/null +++ b/tools/include/uapi/linux/pkt_sched.h @@ -0,0 +1,1055 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __LINUX_PKT_SCHED_H +#define __LINUX_PKT_SCHED_H + +#include <linux/types.h> + +/* Logical priority bands not depending on specific packet scheduler. + Every scheduler will map them to real traffic classes, if it has + no more precise mechanism to classify packets. + + These numbers have no special meaning, though their coincidence + with obsolete IPv6 values is not occasional :-). New IPv6 drafts + preferred full anarchy inspired by diffserv group. + + Note: TC_PRIO_BESTEFFORT does not mean that it is the most unhappy + class, actually, as rule it will be handled with more care than + filler or even bulk. + */ + +#define TC_PRIO_BESTEFFORT 0 +#define TC_PRIO_FILLER 1 +#define TC_PRIO_BULK 2 +#define TC_PRIO_INTERACTIVE_BULK 4 +#define TC_PRIO_INTERACTIVE 6 +#define TC_PRIO_CONTROL 7 + +#define TC_PRIO_MAX 15 + +/* Generic queue statistics, available for all the elements. + Particular schedulers may have also their private records. + */ + +struct tc_stats { + __u64 bytes; /* Number of enqueued bytes */ + __u32 packets; /* Number of enqueued packets */ + __u32 drops; /* Packets dropped because of lack of resources */ + __u32 overlimits; /* Number of throttle events when this + * flow goes out of allocated bandwidth */ + __u32 bps; /* Current flow byte rate */ + __u32 pps; /* Current flow packet rate */ + __u32 qlen; + __u32 backlog; +}; + +struct tc_estimator { + signed char interval; + unsigned char ewma_log; +}; + +/* "Handles" + --------- + + All the traffic control objects have 32bit identifiers, or "handles". + + They can be considered as opaque numbers from user API viewpoint, + but actually they always consist of two fields: major and + minor numbers, which are interpreted by kernel specially, + that may be used by applications, though not recommended. + + F.e. qdisc handles always have minor number equal to zero, + classes (or flows) have major equal to parent qdisc major, and + minor uniquely identifying class inside qdisc. + + Macros to manipulate handles: + */ + +#define TC_H_MAJ_MASK (0xFFFF0000U) +#define TC_H_MIN_MASK (0x0000FFFFU) +#define TC_H_MAJ(h) ((h)&TC_H_MAJ_MASK) +#define TC_H_MIN(h) ((h)&TC_H_MIN_MASK) +#define TC_H_MAKE(maj,min) (((maj)&TC_H_MAJ_MASK)|((min)&TC_H_MIN_MASK)) + +#define TC_H_UNSPEC (0U) +#define TC_H_ROOT (0xFFFFFFFFU) +#define TC_H_INGRESS (0xFFFFFFF1U) +#define TC_H_CLSACT TC_H_INGRESS + +#define TC_H_MIN_PRIORITY 0xFFE0U +#define TC_H_MIN_INGRESS 0xFFF2U +#define TC_H_MIN_EGRESS 0xFFF3U + +/* Need to corrospond to iproute2 tc/tc_core.h "enum link_layer" */ +enum tc_link_layer { + TC_LINKLAYER_UNAWARE, /* Indicate unaware old iproute2 util */ + TC_LINKLAYER_ETHERNET, + TC_LINKLAYER_ATM, +}; +#define TC_LINKLAYER_MASK 0x0F /* limit use to lower 4 bits */ + +struct tc_ratespec { + unsigned char cell_log; + __u8 linklayer; /* lower 4 bits */ + unsigned short overhead; + short cell_align; + unsigned short mpu; + __u32 rate; +}; + +#define TC_RTAB_SIZE 1024 + +struct tc_sizespec { + unsigned char cell_log; + unsigned char size_log; + short cell_align; + int overhead; + unsigned int linklayer; + unsigned int mpu; + unsigned int mtu; + unsigned int tsize; +}; + +enum { + TCA_STAB_UNSPEC, + TCA_STAB_BASE, + TCA_STAB_DATA, + __TCA_STAB_MAX +}; + +#define TCA_STAB_MAX (__TCA_STAB_MAX - 1) + +/* FIFO section */ + +struct tc_fifo_qopt { + __u32 limit; /* Queue length: bytes for bfifo, packets for pfifo */ +}; + +/* SKBPRIO section */ + +/* + * Priorities go from zero to (SKBPRIO_MAX_PRIORITY - 1). + * SKBPRIO_MAX_PRIORITY should be at least 64 in order for skbprio to be able + * to map one to one the DS field of IPV4 and IPV6 headers. + * Memory allocation grows linearly with SKBPRIO_MAX_PRIORITY. + */ + +#define SKBPRIO_MAX_PRIORITY 64 + +struct tc_skbprio_qopt { + __u32 limit; /* Queue length in packets. */ +}; + +/* PRIO section */ + +#define TCQ_PRIO_BANDS 16 +#define TCQ_MIN_PRIO_BANDS 2 + +struct tc_prio_qopt { + int bands; /* Number of bands */ + __u8 priomap[TC_PRIO_MAX+1]; /* Map: logical priority -> PRIO band */ +}; + +/* MULTIQ section */ + +struct tc_multiq_qopt { + __u16 bands; /* Number of bands */ + __u16 max_bands; /* Maximum number of queues */ +}; + +/* PLUG section */ + +#define TCQ_PLUG_BUFFER 0 +#define TCQ_PLUG_RELEASE_ONE 1 +#define TCQ_PLUG_RELEASE_INDEFINITE 2 +#define TCQ_PLUG_LIMIT 3 + +struct tc_plug_qopt { + /* TCQ_PLUG_BUFFER: Inset a plug into the queue and + * buffer any incoming packets + * TCQ_PLUG_RELEASE_ONE: Dequeue packets from queue head + * to beginning of the next plug. + * TCQ_PLUG_RELEASE_INDEFINITE: Dequeue all packets from queue. + * Stop buffering packets until the next TCQ_PLUG_BUFFER + * command is received (just act as a pass-thru queue). + * TCQ_PLUG_LIMIT: Increase/decrease queue size + */ + int action; + __u32 limit; +}; + +/* TBF section */ + +struct tc_tbf_qopt { + struct tc_ratespec rate; + struct tc_ratespec peakrate; + __u32 limit; + __u32 buffer; + __u32 mtu; +}; + +enum { + TCA_TBF_UNSPEC, + TCA_TBF_PARMS, + TCA_TBF_RTAB, + TCA_TBF_PTAB, + TCA_TBF_RATE64, + TCA_TBF_PRATE64, + TCA_TBF_BURST, + TCA_TBF_PBURST, + TCA_TBF_PAD, + __TCA_TBF_MAX, +}; + +#define TCA_TBF_MAX (__TCA_TBF_MAX - 1) + + +/* TEQL section */ + +/* TEQL does not require any parameters */ + +/* SFQ section */ + +struct tc_sfq_qopt { + unsigned quantum; /* Bytes per round allocated to flow */ + int perturb_period; /* Period of hash perturbation */ + __u32 limit; /* Maximal packets in queue */ + unsigned divisor; /* Hash divisor */ + unsigned flows; /* Maximal number of flows */ +}; + +struct tc_sfqred_stats { + __u32 prob_drop; /* Early drops, below max threshold */ + __u32 forced_drop; /* Early drops, after max threshold */ + __u32 prob_mark; /* Marked packets, below max threshold */ + __u32 forced_mark; /* Marked packets, after max threshold */ + __u32 prob_mark_head; /* Marked packets, below max threshold */ + __u32 forced_mark_head;/* Marked packets, after max threshold */ +}; + +struct tc_sfq_qopt_v1 { + struct tc_sfq_qopt v0; + unsigned int depth; /* max number of packets per flow */ + unsigned int headdrop; +/* SFQRED parameters */ + __u32 limit; /* HARD maximal flow queue length (bytes) */ + __u32 qth_min; /* Min average length threshold (bytes) */ + __u32 qth_max; /* Max average length threshold (bytes) */ + unsigned char Wlog; /* log(W) */ + unsigned char Plog; /* log(P_max/(qth_max-qth_min)) */ + unsigned char Scell_log; /* cell size for idle damping */ + unsigned char flags; + __u32 max_P; /* probability, high resolution */ +/* SFQRED stats */ + struct tc_sfqred_stats stats; +}; + + +struct tc_sfq_xstats { + __s32 allot; +}; + +/* RED section */ + +enum { + TCA_RED_UNSPEC, + TCA_RED_PARMS, + TCA_RED_STAB, + TCA_RED_MAX_P, + __TCA_RED_MAX, +}; + +#define TCA_RED_MAX (__TCA_RED_MAX - 1) + +struct tc_red_qopt { + __u32 limit; /* HARD maximal queue length (bytes) */ + __u32 qth_min; /* Min average length threshold (bytes) */ + __u32 qth_max; /* Max average length threshold (bytes) */ + unsigned char Wlog; /* log(W) */ + unsigned char Plog; /* log(P_max/(qth_max-qth_min)) */ + unsigned char Scell_log; /* cell size for idle damping */ + unsigned char flags; +#define TC_RED_ECN 1 +#define TC_RED_HARDDROP 2 +#define TC_RED_ADAPTATIVE 4 +}; + +struct tc_red_xstats { + __u32 early; /* Early drops */ + __u32 pdrop; /* Drops due to queue limits */ + __u32 other; /* Drops due to drop() calls */ + __u32 marked; /* Marked packets */ +}; + +/* GRED section */ + +#define MAX_DPs 16 + +enum { + TCA_GRED_UNSPEC, + TCA_GRED_PARMS, + TCA_GRED_STAB, + TCA_GRED_DPS, + TCA_GRED_MAX_P, + TCA_GRED_LIMIT, + TCA_GRED_VQ_LIST, /* nested TCA_GRED_VQ_ENTRY */ + __TCA_GRED_MAX, +}; + +#define TCA_GRED_MAX (__TCA_GRED_MAX - 1) + +enum { + TCA_GRED_VQ_ENTRY_UNSPEC, + TCA_GRED_VQ_ENTRY, /* nested TCA_GRED_VQ_* */ + __TCA_GRED_VQ_ENTRY_MAX, +}; +#define TCA_GRED_VQ_ENTRY_MAX (__TCA_GRED_VQ_ENTRY_MAX - 1) + +enum { + TCA_GRED_VQ_UNSPEC, + TCA_GRED_VQ_PAD, + TCA_GRED_VQ_DP, /* u32 */ + TCA_GRED_VQ_STAT_BYTES, /* u64 */ + TCA_GRED_VQ_STAT_PACKETS, /* u32 */ + TCA_GRED_VQ_STAT_BACKLOG, /* u32 */ + TCA_GRED_VQ_STAT_PROB_DROP, /* u32 */ + TCA_GRED_VQ_STAT_PROB_MARK, /* u32 */ + TCA_GRED_VQ_STAT_FORCED_DROP, /* u32 */ + TCA_GRED_VQ_STAT_FORCED_MARK, /* u32 */ + TCA_GRED_VQ_STAT_PDROP, /* u32 */ + TCA_GRED_VQ_STAT_OTHER, /* u32 */ + TCA_GRED_VQ_FLAGS, /* u32 */ + __TCA_GRED_VQ_MAX +}; + +#define TCA_GRED_VQ_MAX (__TCA_GRED_VQ_MAX - 1) + +struct tc_gred_qopt { + __u32 limit; /* HARD maximal queue length (bytes) */ + __u32 qth_min; /* Min average length threshold (bytes) */ + __u32 qth_max; /* Max average length threshold (bytes) */ + __u32 DP; /* up to 2^32 DPs */ + __u32 backlog; + __u32 qave; + __u32 forced; + __u32 early; + __u32 other; + __u32 pdrop; + __u8 Wlog; /* log(W) */ + __u8 Plog; /* log(P_max/(qth_max-qth_min)) */ + __u8 Scell_log; /* cell size for idle damping */ + __u8 prio; /* prio of this VQ */ + __u32 packets; + __u32 bytesin; +}; + +/* gred setup */ +struct tc_gred_sopt { + __u32 DPs; + __u32 def_DP; + __u8 grio; + __u8 flags; + __u16 pad1; +}; + +/* CHOKe section */ + +enum { + TCA_CHOKE_UNSPEC, + TCA_CHOKE_PARMS, + TCA_CHOKE_STAB, + TCA_CHOKE_MAX_P, + __TCA_CHOKE_MAX, +}; + +#define TCA_CHOKE_MAX (__TCA_CHOKE_MAX - 1) + +struct tc_choke_qopt { + __u32 limit; /* Hard queue length (packets) */ + __u32 qth_min; /* Min average threshold (packets) */ + __u32 qth_max; /* Max average threshold (packets) */ + unsigned char Wlog; /* log(W) */ + unsigned char Plog; /* log(P_max/(qth_max-qth_min)) */ + unsigned char Scell_log; /* cell size for idle damping */ + unsigned char flags; /* see RED flags */ +}; + +struct tc_choke_xstats { + __u32 early; /* Early drops */ + __u32 pdrop; /* Drops due to queue limits */ + __u32 other; /* Drops due to drop() calls */ + __u32 marked; /* Marked packets */ + __u32 matched; /* Drops due to flow match */ +}; + +/* HTB section */ +#define TC_HTB_NUMPRIO 8 +#define TC_HTB_MAXDEPTH 8 +#define TC_HTB_PROTOVER 3 /* the same as HTB and TC's major */ + +struct tc_htb_opt { + struct tc_ratespec rate; + struct tc_ratespec ceil; + __u32 buffer; + __u32 cbuffer; + __u32 quantum; + __u32 level; /* out only */ + __u32 prio; +}; +struct tc_htb_glob { + __u32 version; /* to match HTB/TC */ + __u32 rate2quantum; /* bps->quantum divisor */ + __u32 defcls; /* default class number */ + __u32 debug; /* debug flags */ + + /* stats */ + __u32 direct_pkts; /* count of non shaped packets */ +}; +enum { + TCA_HTB_UNSPEC, + TCA_HTB_PARMS, + TCA_HTB_INIT, + TCA_HTB_CTAB, + TCA_HTB_RTAB, + TCA_HTB_DIRECT_QLEN, + TCA_HTB_RATE64, + TCA_HTB_CEIL64, + TCA_HTB_PAD, + TCA_HTB_OFFLOAD, + __TCA_HTB_MAX, +}; + +#define TCA_HTB_MAX (__TCA_HTB_MAX - 1) + +struct tc_htb_xstats { + __u32 lends; + __u32 borrows; + __u32 giants; /* unused since 'Make HTB scheduler work with TSO.' */ + __s32 tokens; + __s32 ctokens; +}; + +/* HFSC section */ + +struct tc_hfsc_qopt { + __u16 defcls; /* default class */ +}; + +struct tc_service_curve { + __u32 m1; /* slope of the first segment in bps */ + __u32 d; /* x-projection of the first segment in us */ + __u32 m2; /* slope of the second segment in bps */ +}; + +struct tc_hfsc_stats { + __u64 work; /* total work done */ + __u64 rtwork; /* work done by real-time criteria */ + __u32 period; /* current period */ + __u32 level; /* class level in hierarchy */ +}; + +enum { + TCA_HFSC_UNSPEC, + TCA_HFSC_RSC, + TCA_HFSC_FSC, + TCA_HFSC_USC, + __TCA_HFSC_MAX, +}; + +#define TCA_HFSC_MAX (__TCA_HFSC_MAX - 1) + +/* Network emulator */ + +enum { + TCA_NETEM_UNSPEC, + TCA_NETEM_CORR, + TCA_NETEM_DELAY_DIST, + TCA_NETEM_REORDER, + TCA_NETEM_CORRUPT, + TCA_NETEM_LOSS, + TCA_NETEM_RATE, + TCA_NETEM_ECN, + TCA_NETEM_RATE64, + TCA_NETEM_PAD, + TCA_NETEM_LATENCY64, + TCA_NETEM_JITTER64, + TCA_NETEM_SLOT, + TCA_NETEM_SLOT_DIST, + __TCA_NETEM_MAX, +}; + +#define TCA_NETEM_MAX (__TCA_NETEM_MAX - 1) + +struct tc_netem_qopt { + __u32 latency; /* added delay (us) */ + __u32 limit; /* fifo limit (packets) */ + __u32 loss; /* random packet loss (0=none ~0=100%) */ + __u32 gap; /* re-ordering gap (0 for none) */ + __u32 duplicate; /* random packet dup (0=none ~0=100%) */ + __u32 jitter; /* random jitter in latency (us) */ +}; + +struct tc_netem_corr { + __u32 delay_corr; /* delay correlation */ + __u32 loss_corr; /* packet loss correlation */ + __u32 dup_corr; /* duplicate correlation */ +}; + +struct tc_netem_reorder { + __u32 probability; + __u32 correlation; +}; + +struct tc_netem_corrupt { + __u32 probability; + __u32 correlation; +}; + +struct tc_netem_rate { + __u32 rate; /* byte/s */ + __s32 packet_overhead; + __u32 cell_size; + __s32 cell_overhead; +}; + +struct tc_netem_slot { + __s64 min_delay; /* nsec */ + __s64 max_delay; + __s32 max_packets; + __s32 max_bytes; + __s64 dist_delay; /* nsec */ + __s64 dist_jitter; /* nsec */ +}; + +enum { + NETEM_LOSS_UNSPEC, + NETEM_LOSS_GI, /* General Intuitive - 4 state model */ + NETEM_LOSS_GE, /* Gilbert Elliot models */ + __NETEM_LOSS_MAX +}; +#define NETEM_LOSS_MAX (__NETEM_LOSS_MAX - 1) + +/* State transition probabilities for 4 state model */ +struct tc_netem_gimodel { + __u32 p13; + __u32 p31; + __u32 p32; + __u32 p14; + __u32 p23; +}; + +/* Gilbert-Elliot models */ +struct tc_netem_gemodel { + __u32 p; + __u32 r; + __u32 h; + __u32 k1; +}; + +#define NETEM_DIST_SCALE 8192 +#define NETEM_DIST_MAX 16384 + +/* DRR */ + +enum { + TCA_DRR_UNSPEC, + TCA_DRR_QUANTUM, + __TCA_DRR_MAX +}; + +#define TCA_DRR_MAX (__TCA_DRR_MAX - 1) + +struct tc_drr_stats { + __u32 deficit; +}; + +/* MQPRIO */ +#define TC_QOPT_BITMASK 15 +#define TC_QOPT_MAX_QUEUE 16 + +enum { + TC_MQPRIO_HW_OFFLOAD_NONE, /* no offload requested */ + TC_MQPRIO_HW_OFFLOAD_TCS, /* offload TCs, no queue counts */ + __TC_MQPRIO_HW_OFFLOAD_MAX +}; + +#define TC_MQPRIO_HW_OFFLOAD_MAX (__TC_MQPRIO_HW_OFFLOAD_MAX - 1) + +enum { + TC_MQPRIO_MODE_DCB, + TC_MQPRIO_MODE_CHANNEL, + __TC_MQPRIO_MODE_MAX +}; + +#define __TC_MQPRIO_MODE_MAX (__TC_MQPRIO_MODE_MAX - 1) + +enum { + TC_MQPRIO_SHAPER_DCB, + TC_MQPRIO_SHAPER_BW_RATE, /* Add new shapers below */ + __TC_MQPRIO_SHAPER_MAX +}; + +#define __TC_MQPRIO_SHAPER_MAX (__TC_MQPRIO_SHAPER_MAX - 1) + +struct tc_mqprio_qopt { + __u8 num_tc; + __u8 prio_tc_map[TC_QOPT_BITMASK + 1]; + __u8 hw; + __u16 count[TC_QOPT_MAX_QUEUE]; + __u16 offset[TC_QOPT_MAX_QUEUE]; +}; + +#define TC_MQPRIO_F_MODE 0x1 +#define TC_MQPRIO_F_SHAPER 0x2 +#define TC_MQPRIO_F_MIN_RATE 0x4 +#define TC_MQPRIO_F_MAX_RATE 0x8 + +enum { + TCA_MQPRIO_UNSPEC, + TCA_MQPRIO_MODE, + TCA_MQPRIO_SHAPER, + TCA_MQPRIO_MIN_RATE64, + TCA_MQPRIO_MAX_RATE64, + __TCA_MQPRIO_MAX, +}; + +#define TCA_MQPRIO_MAX (__TCA_MQPRIO_MAX - 1) + +/* SFB */ + +enum { + TCA_SFB_UNSPEC, + TCA_SFB_PARMS, + __TCA_SFB_MAX, +}; + +#define TCA_SFB_MAX (__TCA_SFB_MAX - 1) + +/* + * Note: increment, decrement are Q0.16 fixed-point values. + */ +struct tc_sfb_qopt { + __u32 rehash_interval; /* delay between hash move, in ms */ + __u32 warmup_time; /* double buffering warmup time in ms (warmup_time < rehash_interval) */ + __u32 max; /* max len of qlen_min */ + __u32 bin_size; /* maximum queue length per bin */ + __u32 increment; /* probability increment, (d1 in Blue) */ + __u32 decrement; /* probability decrement, (d2 in Blue) */ + __u32 limit; /* max SFB queue length */ + __u32 penalty_rate; /* inelastic flows are rate limited to 'rate' pps */ + __u32 penalty_burst; +}; + +struct tc_sfb_xstats { + __u32 earlydrop; + __u32 penaltydrop; + __u32 bucketdrop; + __u32 queuedrop; + __u32 childdrop; /* drops in child qdisc */ + __u32 marked; + __u32 maxqlen; + __u32 maxprob; + __u32 avgprob; +}; + +#define SFB_MAX_PROB 0xFFFF + +/* QFQ */ +enum { + TCA_QFQ_UNSPEC, + TCA_QFQ_WEIGHT, + TCA_QFQ_LMAX, + __TCA_QFQ_MAX +}; + +#define TCA_QFQ_MAX (__TCA_QFQ_MAX - 1) + +struct tc_qfq_stats { + __u32 weight; + __u32 lmax; +}; + +/* CODEL */ + +enum { + TCA_CODEL_UNSPEC, + TCA_CODEL_TARGET, + TCA_CODEL_LIMIT, + TCA_CODEL_INTERVAL, + TCA_CODEL_ECN, + TCA_CODEL_CE_THRESHOLD, + __TCA_CODEL_MAX +}; + +#define TCA_CODEL_MAX (__TCA_CODEL_MAX - 1) + +struct tc_codel_xstats { + __u32 maxpacket; /* largest packet we've seen so far */ + __u32 count; /* how many drops we've done since the last time we + * entered dropping state + */ + __u32 lastcount; /* count at entry to dropping state */ + __u32 ldelay; /* in-queue delay seen by most recently dequeued packet */ + __s32 drop_next; /* time to drop next packet */ + __u32 drop_overlimit; /* number of time max qdisc packet limit was hit */ + __u32 ecn_mark; /* number of packets we ECN marked instead of dropped */ + __u32 dropping; /* are we in dropping state ? */ + __u32 ce_mark; /* number of CE marked packets because of ce_threshold */ +}; + +/* FQ_CODEL */ + +enum { + TCA_FQ_CODEL_UNSPEC, + TCA_FQ_CODEL_TARGET, + TCA_FQ_CODEL_LIMIT, + TCA_FQ_CODEL_INTERVAL, + TCA_FQ_CODEL_ECN, + TCA_FQ_CODEL_FLOWS, + TCA_FQ_CODEL_QUANTUM, + TCA_FQ_CODEL_CE_THRESHOLD, + TCA_FQ_CODEL_DROP_BATCH_SIZE, + TCA_FQ_CODEL_MEMORY_LIMIT, + __TCA_FQ_CODEL_MAX +}; + +#define TCA_FQ_CODEL_MAX (__TCA_FQ_CODEL_MAX - 1) + +enum { + TCA_FQ_CODEL_XSTATS_QDISC, + TCA_FQ_CODEL_XSTATS_CLASS, +}; + +struct tc_fq_codel_qd_stats { + __u32 maxpacket; /* largest packet we've seen so far */ + __u32 drop_overlimit; /* number of time max qdisc + * packet limit was hit + */ + __u32 ecn_mark; /* number of packets we ECN marked + * instead of being dropped + */ + __u32 new_flow_count; /* number of time packets + * created a 'new flow' + */ + __u32 new_flows_len; /* count of flows in new list */ + __u32 old_flows_len; /* count of flows in old list */ + __u32 ce_mark; /* packets above ce_threshold */ + __u32 memory_usage; /* in bytes */ + __u32 drop_overmemory; +}; + +struct tc_fq_codel_cl_stats { + __s32 deficit; + __u32 ldelay; /* in-queue delay seen by most recently + * dequeued packet + */ + __u32 count; + __u32 lastcount; + __u32 dropping; + __s32 drop_next; +}; + +struct tc_fq_codel_xstats { + __u32 type; + union { + struct tc_fq_codel_qd_stats qdisc_stats; + struct tc_fq_codel_cl_stats class_stats; + }; +}; + +/* FQ */ + +enum { + TCA_FQ_UNSPEC, + + TCA_FQ_PLIMIT, /* limit of total number of packets in queue */ + + TCA_FQ_FLOW_PLIMIT, /* limit of packets per flow */ + + TCA_FQ_QUANTUM, /* RR quantum */ + + TCA_FQ_INITIAL_QUANTUM, /* RR quantum for new flow */ + + TCA_FQ_RATE_ENABLE, /* enable/disable rate limiting */ + + TCA_FQ_FLOW_DEFAULT_RATE,/* obsolete, do not use */ + + TCA_FQ_FLOW_MAX_RATE, /* per flow max rate */ + + TCA_FQ_BUCKETS_LOG, /* log2(number of buckets) */ + + TCA_FQ_FLOW_REFILL_DELAY, /* flow credit refill delay in usec */ + + TCA_FQ_ORPHAN_MASK, /* mask applied to orphaned skb hashes */ + + TCA_FQ_LOW_RATE_THRESHOLD, /* per packet delay under this rate */ + + TCA_FQ_CE_THRESHOLD, /* DCTCP-like CE-marking threshold */ + + __TCA_FQ_MAX +}; + +#define TCA_FQ_MAX (__TCA_FQ_MAX - 1) + +struct tc_fq_qd_stats { + __u64 gc_flows; + __u64 highprio_packets; + __u64 tcp_retrans; + __u64 throttled; + __u64 flows_plimit; + __u64 pkts_too_long; + __u64 allocation_errors; + __s64 time_next_delayed_flow; + __u32 flows; + __u32 inactive_flows; + __u32 throttled_flows; + __u32 unthrottle_latency_ns; + __u64 ce_mark; /* packets above ce_threshold */ +}; + +/* Heavy-Hitter Filter */ + +enum { + TCA_HHF_UNSPEC, + TCA_HHF_BACKLOG_LIMIT, + TCA_HHF_QUANTUM, + TCA_HHF_HH_FLOWS_LIMIT, + TCA_HHF_RESET_TIMEOUT, + TCA_HHF_ADMIT_BYTES, + TCA_HHF_EVICT_TIMEOUT, + TCA_HHF_NON_HH_WEIGHT, + __TCA_HHF_MAX +}; + +#define TCA_HHF_MAX (__TCA_HHF_MAX - 1) + +struct tc_hhf_xstats { + __u32 drop_overlimit; /* number of times max qdisc packet limit + * was hit + */ + __u32 hh_overlimit; /* number of times max heavy-hitters was hit */ + __u32 hh_tot_count; /* number of captured heavy-hitters so far */ + __u32 hh_cur_count; /* number of current heavy-hitters */ +}; + +/* PIE */ +enum { + TCA_PIE_UNSPEC, + TCA_PIE_TARGET, + TCA_PIE_LIMIT, + TCA_PIE_TUPDATE, + TCA_PIE_ALPHA, + TCA_PIE_BETA, + TCA_PIE_ECN, + TCA_PIE_BYTEMODE, + __TCA_PIE_MAX +}; +#define TCA_PIE_MAX (__TCA_PIE_MAX - 1) + +struct tc_pie_xstats { + __u32 prob; /* current probability */ + __u32 delay; /* current delay in ms */ + __u32 avg_dq_rate; /* current average dq_rate in bits/pie_time */ + __u32 packets_in; /* total number of packets enqueued */ + __u32 dropped; /* packets dropped due to pie_action */ + __u32 overlimit; /* dropped due to lack of space in queue */ + __u32 maxq; /* maximum queue size */ + __u32 ecn_mark; /* packets marked with ecn*/ +}; + +/* CBS */ +struct tc_cbs_qopt { + __u8 offload; + __u8 _pad[3]; + __s32 hicredit; + __s32 locredit; + __s32 idleslope; + __s32 sendslope; +}; + +enum { + TCA_CBS_UNSPEC, + TCA_CBS_PARMS, + __TCA_CBS_MAX, +}; + +#define TCA_CBS_MAX (__TCA_CBS_MAX - 1) + + +/* ETF */ +struct tc_etf_qopt { + __s32 delta; + __s32 clockid; + __u32 flags; +#define TC_ETF_DEADLINE_MODE_ON BIT(0) +#define TC_ETF_OFFLOAD_ON BIT(1) +}; + +enum { + TCA_ETF_UNSPEC, + TCA_ETF_PARMS, + __TCA_ETF_MAX, +}; + +#define TCA_ETF_MAX (__TCA_ETF_MAX - 1) + + +/* CAKE */ +enum { + TCA_CAKE_UNSPEC, + TCA_CAKE_PAD, + TCA_CAKE_BASE_RATE64, + TCA_CAKE_DIFFSERV_MODE, + TCA_CAKE_ATM, + TCA_CAKE_FLOW_MODE, + TCA_CAKE_OVERHEAD, + TCA_CAKE_RTT, + TCA_CAKE_TARGET, + TCA_CAKE_AUTORATE, + TCA_CAKE_MEMORY, + TCA_CAKE_NAT, + TCA_CAKE_RAW, + TCA_CAKE_WASH, + TCA_CAKE_MPU, + TCA_CAKE_INGRESS, + TCA_CAKE_ACK_FILTER, + TCA_CAKE_SPLIT_GSO, + __TCA_CAKE_MAX +}; +#define TCA_CAKE_MAX (__TCA_CAKE_MAX - 1) + +enum { + __TCA_CAKE_STATS_INVALID, + TCA_CAKE_STATS_PAD, + TCA_CAKE_STATS_CAPACITY_ESTIMATE64, + TCA_CAKE_STATS_MEMORY_LIMIT, + TCA_CAKE_STATS_MEMORY_USED, + TCA_CAKE_STATS_AVG_NETOFF, + TCA_CAKE_STATS_MIN_NETLEN, + TCA_CAKE_STATS_MAX_NETLEN, + TCA_CAKE_STATS_MIN_ADJLEN, + TCA_CAKE_STATS_MAX_ADJLEN, + TCA_CAKE_STATS_TIN_STATS, + TCA_CAKE_STATS_DEFICIT, + TCA_CAKE_STATS_COBALT_COUNT, + TCA_CAKE_STATS_DROPPING, + TCA_CAKE_STATS_DROP_NEXT_US, + TCA_CAKE_STATS_P_DROP, + TCA_CAKE_STATS_BLUE_TIMER_US, + __TCA_CAKE_STATS_MAX +}; +#define TCA_CAKE_STATS_MAX (__TCA_CAKE_STATS_MAX - 1) + +enum { + __TCA_CAKE_TIN_STATS_INVALID, + TCA_CAKE_TIN_STATS_PAD, + TCA_CAKE_TIN_STATS_SENT_PACKETS, + TCA_CAKE_TIN_STATS_SENT_BYTES64, + TCA_CAKE_TIN_STATS_DROPPED_PACKETS, + TCA_CAKE_TIN_STATS_DROPPED_BYTES64, + TCA_CAKE_TIN_STATS_ACKS_DROPPED_PACKETS, + TCA_CAKE_TIN_STATS_ACKS_DROPPED_BYTES64, + TCA_CAKE_TIN_STATS_ECN_MARKED_PACKETS, + TCA_CAKE_TIN_STATS_ECN_MARKED_BYTES64, + TCA_CAKE_TIN_STATS_BACKLOG_PACKETS, + TCA_CAKE_TIN_STATS_BACKLOG_BYTES, + TCA_CAKE_TIN_STATS_THRESHOLD_RATE64, + TCA_CAKE_TIN_STATS_TARGET_US, + TCA_CAKE_TIN_STATS_INTERVAL_US, + TCA_CAKE_TIN_STATS_WAY_INDIRECT_HITS, + TCA_CAKE_TIN_STATS_WAY_MISSES, + TCA_CAKE_TIN_STATS_WAY_COLLISIONS, + TCA_CAKE_TIN_STATS_PEAK_DELAY_US, + TCA_CAKE_TIN_STATS_AVG_DELAY_US, + TCA_CAKE_TIN_STATS_BASE_DELAY_US, + TCA_CAKE_TIN_STATS_SPARSE_FLOWS, + TCA_CAKE_TIN_STATS_BULK_FLOWS, + TCA_CAKE_TIN_STATS_UNRESPONSIVE_FLOWS, + TCA_CAKE_TIN_STATS_MAX_SKBLEN, + TCA_CAKE_TIN_STATS_FLOW_QUANTUM, + __TCA_CAKE_TIN_STATS_MAX +}; +#define TCA_CAKE_TIN_STATS_MAX (__TCA_CAKE_TIN_STATS_MAX - 1) +#define TC_CAKE_MAX_TINS (8) + +enum { + CAKE_FLOW_NONE = 0, + CAKE_FLOW_SRC_IP, + CAKE_FLOW_DST_IP, + CAKE_FLOW_HOSTS, /* = CAKE_FLOW_SRC_IP | CAKE_FLOW_DST_IP */ + CAKE_FLOW_FLOWS, + CAKE_FLOW_DUAL_SRC, /* = CAKE_FLOW_SRC_IP | CAKE_FLOW_FLOWS */ + CAKE_FLOW_DUAL_DST, /* = CAKE_FLOW_DST_IP | CAKE_FLOW_FLOWS */ + CAKE_FLOW_TRIPLE, /* = CAKE_FLOW_HOSTS | CAKE_FLOW_FLOWS */ + CAKE_FLOW_MAX, +}; + +enum { + CAKE_DIFFSERV_DIFFSERV3 = 0, + CAKE_DIFFSERV_DIFFSERV4, + CAKE_DIFFSERV_DIFFSERV8, + CAKE_DIFFSERV_BESTEFFORT, + CAKE_DIFFSERV_PRECEDENCE, + CAKE_DIFFSERV_MAX +}; + +enum { + CAKE_ACK_NONE = 0, + CAKE_ACK_FILTER, + CAKE_ACK_AGGRESSIVE, + CAKE_ACK_MAX +}; + +enum { + CAKE_ATM_NONE = 0, + CAKE_ATM_ATM, + CAKE_ATM_PTM, + CAKE_ATM_MAX +}; + + +/* TAPRIO */ +enum { + TC_TAPRIO_CMD_SET_GATES = 0x00, + TC_TAPRIO_CMD_SET_AND_HOLD = 0x01, + TC_TAPRIO_CMD_SET_AND_RELEASE = 0x02, +}; + +enum { + TCA_TAPRIO_SCHED_ENTRY_UNSPEC, + TCA_TAPRIO_SCHED_ENTRY_INDEX, /* u32 */ + TCA_TAPRIO_SCHED_ENTRY_CMD, /* u8 */ + TCA_TAPRIO_SCHED_ENTRY_GATE_MASK, /* u32 */ + TCA_TAPRIO_SCHED_ENTRY_INTERVAL, /* u32 */ + __TCA_TAPRIO_SCHED_ENTRY_MAX, +}; +#define TCA_TAPRIO_SCHED_ENTRY_MAX (__TCA_TAPRIO_SCHED_ENTRY_MAX - 1) + +/* The format for schedule entry list is: + * [TCA_TAPRIO_SCHED_ENTRY_LIST] + * [TCA_TAPRIO_SCHED_ENTRY] + * [TCA_TAPRIO_SCHED_ENTRY_CMD] + * [TCA_TAPRIO_SCHED_ENTRY_GATES] + * [TCA_TAPRIO_SCHED_ENTRY_INTERVAL] + */ +enum { + TCA_TAPRIO_SCHED_UNSPEC, + TCA_TAPRIO_SCHED_ENTRY, + __TCA_TAPRIO_SCHED_MAX, +}; + +#define TCA_TAPRIO_SCHED_MAX (__TCA_TAPRIO_SCHED_MAX - 1) + +enum { + TCA_TAPRIO_ATTR_UNSPEC, + TCA_TAPRIO_ATTR_PRIOMAP, /* struct tc_mqprio_qopt */ + TCA_TAPRIO_ATTR_SCHED_ENTRY_LIST, /* nested of entry */ + TCA_TAPRIO_ATTR_SCHED_BASE_TIME, /* s64 */ + TCA_TAPRIO_ATTR_SCHED_SINGLE_ENTRY, /* single entry */ + TCA_TAPRIO_ATTR_SCHED_CLOCKID, /* s32 */ + TCA_TAPRIO_PAD, + __TCA_TAPRIO_ATTR_MAX, +}; + +#define TCA_TAPRIO_ATTR_MAX (__TCA_TAPRIO_ATTR_MAX - 1) + +#endif diff --git a/tools/include/uapi/linux/prctl.h b/tools/include/uapi/linux/prctl.h new file mode 100644 index 000000000000..475fc8ca4403 --- /dev/null +++ b/tools/include/uapi/linux/prctl.h @@ -0,0 +1,377 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _LINUX_PRCTL_H +#define _LINUX_PRCTL_H + +#include <linux/types.h> + +/* Values to pass as first argument to prctl() */ + +#define PR_SET_PDEATHSIG 1 /* Second arg is a signal */ +#define PR_GET_PDEATHSIG 2 /* Second arg is a ptr to return the signal */ + +/* Get/set current->mm->dumpable */ +#define PR_GET_DUMPABLE 3 +#define PR_SET_DUMPABLE 4 + +/* Get/set unaligned access control bits (if meaningful) */ +#define PR_GET_UNALIGN 5 +#define PR_SET_UNALIGN 6 +# define PR_UNALIGN_NOPRINT 1 /* silently fix up unaligned user accesses */ +# define PR_UNALIGN_SIGBUS 2 /* generate SIGBUS on unaligned user access */ + +/* Get/set whether or not to drop capabilities on setuid() away from + * uid 0 (as per security/commoncap.c) */ +#define PR_GET_KEEPCAPS 7 +#define PR_SET_KEEPCAPS 8 + +/* Get/set floating-point emulation control bits (if meaningful) */ +#define PR_GET_FPEMU 9 +#define PR_SET_FPEMU 10 +# define PR_FPEMU_NOPRINT 1 /* silently emulate fp operations accesses */ +# define PR_FPEMU_SIGFPE 2 /* don't emulate fp operations, send SIGFPE instead */ + +/* Get/set floating-point exception mode (if meaningful) */ +#define PR_GET_FPEXC 11 +#define PR_SET_FPEXC 12 +# define PR_FP_EXC_SW_ENABLE 0x80 /* Use FPEXC for FP exception enables */ +# define PR_FP_EXC_DIV 0x010000 /* floating point divide by zero */ +# define PR_FP_EXC_OVF 0x020000 /* floating point overflow */ +# define PR_FP_EXC_UND 0x040000 /* floating point underflow */ +# define PR_FP_EXC_RES 0x080000 /* floating point inexact result */ +# define PR_FP_EXC_INV 0x100000 /* floating point invalid operation */ +# define PR_FP_EXC_DISABLED 0 /* FP exceptions disabled */ +# define PR_FP_EXC_NONRECOV 1 /* async non-recoverable exc. mode */ +# define PR_FP_EXC_ASYNC 2 /* async recoverable exception mode */ +# define PR_FP_EXC_PRECISE 3 /* precise exception mode */ + +/* Get/set whether we use statistical process timing or accurate timestamp + * based process timing */ +#define PR_GET_TIMING 13 +#define PR_SET_TIMING 14 +# define PR_TIMING_STATISTICAL 0 /* Normal, traditional, + statistical process timing */ +# define PR_TIMING_TIMESTAMP 1 /* Accurate timestamp based + process timing */ + +#define PR_SET_NAME 15 /* Set process name */ +#define PR_GET_NAME 16 /* Get process name */ + +/* Get/set process endian */ +#define PR_GET_ENDIAN 19 +#define PR_SET_ENDIAN 20 +# define PR_ENDIAN_BIG 0 +# define PR_ENDIAN_LITTLE 1 /* True little endian mode */ +# define PR_ENDIAN_PPC_LITTLE 2 /* "PowerPC" pseudo little endian */ + +/* Get/set process seccomp mode */ +#define PR_GET_SECCOMP 21 +#define PR_SET_SECCOMP 22 + +/* Get/set the capability bounding set (as per security/commoncap.c) */ +#define PR_CAPBSET_READ 23 +#define PR_CAPBSET_DROP 24 + +/* Get/set the process' ability to use the timestamp counter instruction */ +#define PR_GET_TSC 25 +#define PR_SET_TSC 26 +# define PR_TSC_ENABLE 1 /* allow the use of the timestamp counter */ +# define PR_TSC_SIGSEGV 2 /* throw a SIGSEGV instead of reading the TSC */ + +/* Get/set securebits (as per security/commoncap.c) */ +#define PR_GET_SECUREBITS 27 +#define PR_SET_SECUREBITS 28 + +/* + * Get/set the timerslack as used by poll/select/nanosleep + * A value of 0 means "use default" + */ +#define PR_SET_TIMERSLACK 29 +#define PR_GET_TIMERSLACK 30 + +#define PR_TASK_PERF_EVENTS_DISABLE 31 +#define PR_TASK_PERF_EVENTS_ENABLE 32 + +/* + * Set early/late kill mode for hwpoison memory corruption. + * This influences when the process gets killed on a memory corruption. + */ +#define PR_MCE_KILL 33 +# define PR_MCE_KILL_CLEAR 0 +# define PR_MCE_KILL_SET 1 + +# define PR_MCE_KILL_LATE 0 +# define PR_MCE_KILL_EARLY 1 +# define PR_MCE_KILL_DEFAULT 2 + +#define PR_MCE_KILL_GET 34 + +/* + * Tune up process memory map specifics. + */ +#define PR_SET_MM 35 +# define PR_SET_MM_START_CODE 1 +# define PR_SET_MM_END_CODE 2 +# define PR_SET_MM_START_DATA 3 +# define PR_SET_MM_END_DATA 4 +# define PR_SET_MM_START_STACK 5 +# define PR_SET_MM_START_BRK 6 +# define PR_SET_MM_BRK 7 +# define PR_SET_MM_ARG_START 8 +# define PR_SET_MM_ARG_END 9 +# define PR_SET_MM_ENV_START 10 +# define PR_SET_MM_ENV_END 11 +# define PR_SET_MM_AUXV 12 +# define PR_SET_MM_EXE_FILE 13 +# define PR_SET_MM_MAP 14 +# define PR_SET_MM_MAP_SIZE 15 + +/* + * This structure provides new memory descriptor + * map which mostly modifies /proc/pid/stat[m] + * output for a task. This mostly done in a + * sake of checkpoint/restore functionality. + */ +struct prctl_mm_map { + __u64 start_code; /* code section bounds */ + __u64 end_code; + __u64 start_data; /* data section bounds */ + __u64 end_data; + __u64 start_brk; /* heap for brk() syscall */ + __u64 brk; + __u64 start_stack; /* stack starts at */ + __u64 arg_start; /* command line arguments bounds */ + __u64 arg_end; + __u64 env_start; /* environment variables bounds */ + __u64 env_end; + __u64 *auxv; /* auxiliary vector */ + __u32 auxv_size; /* vector size */ + __u32 exe_fd; /* /proc/$pid/exe link file */ +}; + +/* + * Set specific pid that is allowed to ptrace the current task. + * A value of 0 mean "no process". + */ +#define PR_SET_PTRACER 0x59616d61 +# define PR_SET_PTRACER_ANY ((unsigned long)-1) + +#define PR_SET_CHILD_SUBREAPER 36 +#define PR_GET_CHILD_SUBREAPER 37 + +/* + * If no_new_privs is set, then operations that grant new privileges (i.e. + * execve) will either fail or not grant them. This affects suid/sgid, + * file capabilities, and LSMs. + * + * Operations that merely manipulate or drop existing privileges (setresuid, + * capset, etc.) will still work. Drop those privileges if you want them gone. + * + * Changing LSM security domain is considered a new privilege. So, for example, + * asking selinux for a specific new context (e.g. with runcon) will result + * in execve returning -EPERM. + * + * See Documentation/userspace-api/no_new_privs.rst for more details. + */ +#define PR_SET_NO_NEW_PRIVS 38 +#define PR_GET_NO_NEW_PRIVS 39 + +#define PR_GET_TID_ADDRESS 40 + +#define PR_SET_THP_DISABLE 41 +#define PR_GET_THP_DISABLE 42 + +/* + * No longer implemented, but left here to ensure the numbers stay reserved: + */ +#define PR_MPX_ENABLE_MANAGEMENT 43 +#define PR_MPX_DISABLE_MANAGEMENT 44 + +#define PR_SET_FP_MODE 45 +#define PR_GET_FP_MODE 46 +# define PR_FP_MODE_FR (1 << 0) /* 64b FP registers */ +# define PR_FP_MODE_FRE (1 << 1) /* 32b compatibility */ + +/* Control the ambient capability set */ +#define PR_CAP_AMBIENT 47 +# define PR_CAP_AMBIENT_IS_SET 1 +# define PR_CAP_AMBIENT_RAISE 2 +# define PR_CAP_AMBIENT_LOWER 3 +# define PR_CAP_AMBIENT_CLEAR_ALL 4 + +/* arm64 Scalable Vector Extension controls */ +/* Flag values must be kept in sync with ptrace NT_ARM_SVE interface */ +#define PR_SVE_SET_VL 50 /* set task vector length */ +# define PR_SVE_SET_VL_ONEXEC (1 << 18) /* defer effect until exec */ +#define PR_SVE_GET_VL 51 /* get task vector length */ +/* Bits common to PR_SVE_SET_VL and PR_SVE_GET_VL */ +# define PR_SVE_VL_LEN_MASK 0xffff +# define PR_SVE_VL_INHERIT (1 << 17) /* inherit across exec */ + +/* Per task speculation control */ +#define PR_GET_SPECULATION_CTRL 52 +#define PR_SET_SPECULATION_CTRL 53 +/* Speculation control variants */ +# define PR_SPEC_STORE_BYPASS 0 +# define PR_SPEC_INDIRECT_BRANCH 1 +# define PR_SPEC_L1D_FLUSH 2 +/* Return and control values for PR_SET/GET_SPECULATION_CTRL */ +# define PR_SPEC_NOT_AFFECTED 0 +# define PR_SPEC_PRCTL (1UL << 0) +# define PR_SPEC_ENABLE (1UL << 1) +# define PR_SPEC_DISABLE (1UL << 2) +# define PR_SPEC_FORCE_DISABLE (1UL << 3) +# define PR_SPEC_DISABLE_NOEXEC (1UL << 4) + +/* Reset arm64 pointer authentication keys */ +#define PR_PAC_RESET_KEYS 54 +# define PR_PAC_APIAKEY (1UL << 0) +# define PR_PAC_APIBKEY (1UL << 1) +# define PR_PAC_APDAKEY (1UL << 2) +# define PR_PAC_APDBKEY (1UL << 3) +# define PR_PAC_APGAKEY (1UL << 4) + +/* Tagged user address controls for arm64 and RISC-V */ +#define PR_SET_TAGGED_ADDR_CTRL 55 +#define PR_GET_TAGGED_ADDR_CTRL 56 +# define PR_TAGGED_ADDR_ENABLE (1UL << 0) +/* MTE tag check fault modes */ +# define PR_MTE_TCF_NONE 0UL +# define PR_MTE_TCF_SYNC (1UL << 1) +# define PR_MTE_TCF_ASYNC (1UL << 2) +# define PR_MTE_TCF_MASK (PR_MTE_TCF_SYNC | PR_MTE_TCF_ASYNC) +/* MTE tag inclusion mask */ +# define PR_MTE_TAG_SHIFT 3 +# define PR_MTE_TAG_MASK (0xffffUL << PR_MTE_TAG_SHIFT) +/* Unused; kept only for source compatibility */ +# define PR_MTE_TCF_SHIFT 1 +/* RISC-V pointer masking tag length */ +# define PR_PMLEN_SHIFT 24 +# define PR_PMLEN_MASK (0x7fUL << PR_PMLEN_SHIFT) + +/* Control reclaim behavior when allocating memory */ +#define PR_SET_IO_FLUSHER 57 +#define PR_GET_IO_FLUSHER 58 + +/* Dispatch syscalls to a userspace handler */ +#define PR_SET_SYSCALL_USER_DISPATCH 59 +# define PR_SYS_DISPATCH_OFF 0 +/* Enable dispatch except for the specified range */ +# define PR_SYS_DISPATCH_EXCLUSIVE_ON 1 +/* Enable dispatch for the specified range */ +# define PR_SYS_DISPATCH_INCLUSIVE_ON 2 +/* Legacy name for backwards compatibility */ +# define PR_SYS_DISPATCH_ON PR_SYS_DISPATCH_EXCLUSIVE_ON +/* The control values for the user space selector when dispatch is enabled */ +# define SYSCALL_DISPATCH_FILTER_ALLOW 0 +# define SYSCALL_DISPATCH_FILTER_BLOCK 1 + +/* Set/get enabled arm64 pointer authentication keys */ +#define PR_PAC_SET_ENABLED_KEYS 60 +#define PR_PAC_GET_ENABLED_KEYS 61 + +/* Request the scheduler to share a core */ +#define PR_SCHED_CORE 62 +# define PR_SCHED_CORE_GET 0 +# define PR_SCHED_CORE_CREATE 1 /* create unique core_sched cookie */ +# define PR_SCHED_CORE_SHARE_TO 2 /* push core_sched cookie to pid */ +# define PR_SCHED_CORE_SHARE_FROM 3 /* pull core_sched cookie to pid */ +# define PR_SCHED_CORE_MAX 4 +# define PR_SCHED_CORE_SCOPE_THREAD 0 +# define PR_SCHED_CORE_SCOPE_THREAD_GROUP 1 +# define PR_SCHED_CORE_SCOPE_PROCESS_GROUP 2 + +/* arm64 Scalable Matrix Extension controls */ +/* Flag values must be in sync with SVE versions */ +#define PR_SME_SET_VL 63 /* set task vector length */ +# define PR_SME_SET_VL_ONEXEC (1 << 18) /* defer effect until exec */ +#define PR_SME_GET_VL 64 /* get task vector length */ +/* Bits common to PR_SME_SET_VL and PR_SME_GET_VL */ +# define PR_SME_VL_LEN_MASK 0xffff +# define PR_SME_VL_INHERIT (1 << 17) /* inherit across exec */ + +/* Memory deny write / execute */ +#define PR_SET_MDWE 65 +# define PR_MDWE_REFUSE_EXEC_GAIN (1UL << 0) +# define PR_MDWE_NO_INHERIT (1UL << 1) + +#define PR_GET_MDWE 66 + +#define PR_SET_VMA 0x53564d41 +# define PR_SET_VMA_ANON_NAME 0 + +#define PR_GET_AUXV 0x41555856 + +#define PR_SET_MEMORY_MERGE 67 +#define PR_GET_MEMORY_MERGE 68 + +#define PR_RISCV_V_SET_CONTROL 69 +#define PR_RISCV_V_GET_CONTROL 70 +# define PR_RISCV_V_VSTATE_CTRL_DEFAULT 0 +# define PR_RISCV_V_VSTATE_CTRL_OFF 1 +# define PR_RISCV_V_VSTATE_CTRL_ON 2 +# define PR_RISCV_V_VSTATE_CTRL_INHERIT (1 << 4) +# define PR_RISCV_V_VSTATE_CTRL_CUR_MASK 0x3 +# define PR_RISCV_V_VSTATE_CTRL_NEXT_MASK 0xc +# define PR_RISCV_V_VSTATE_CTRL_MASK 0x1f + +#define PR_RISCV_SET_ICACHE_FLUSH_CTX 71 +# define PR_RISCV_CTX_SW_FENCEI_ON 0 +# define PR_RISCV_CTX_SW_FENCEI_OFF 1 +# define PR_RISCV_SCOPE_PER_PROCESS 0 +# define PR_RISCV_SCOPE_PER_THREAD 1 + +/* PowerPC Dynamic Execution Control Register (DEXCR) controls */ +#define PR_PPC_GET_DEXCR 72 +#define PR_PPC_SET_DEXCR 73 +/* DEXCR aspect to act on */ +# define PR_PPC_DEXCR_SBHE 0 /* Speculative branch hint enable */ +# define PR_PPC_DEXCR_IBRTPD 1 /* Indirect branch recurrent target prediction disable */ +# define PR_PPC_DEXCR_SRAPD 2 /* Subroutine return address prediction disable */ +# define PR_PPC_DEXCR_NPHIE 3 /* Non-privileged hash instruction enable */ +/* Action to apply / return */ +# define PR_PPC_DEXCR_CTRL_EDITABLE 0x1 /* Aspect can be modified with PR_PPC_SET_DEXCR */ +# define PR_PPC_DEXCR_CTRL_SET 0x2 /* Set the aspect for this process */ +# define PR_PPC_DEXCR_CTRL_CLEAR 0x4 /* Clear the aspect for this process */ +# define PR_PPC_DEXCR_CTRL_SET_ONEXEC 0x8 /* Set the aspect on exec */ +# define PR_PPC_DEXCR_CTRL_CLEAR_ONEXEC 0x10 /* Clear the aspect on exec */ +# define PR_PPC_DEXCR_CTRL_MASK 0x1f + +/* + * Get the current shadow stack configuration for the current thread, + * this will be the value configured via PR_SET_SHADOW_STACK_STATUS. + */ +#define PR_GET_SHADOW_STACK_STATUS 74 + +/* + * Set the current shadow stack configuration. Enabling the shadow + * stack will cause a shadow stack to be allocated for the thread. + */ +#define PR_SET_SHADOW_STACK_STATUS 75 +# define PR_SHADOW_STACK_ENABLE (1UL << 0) +# define PR_SHADOW_STACK_WRITE (1UL << 1) +# define PR_SHADOW_STACK_PUSH (1UL << 2) + +/* + * Prevent further changes to the specified shadow stack + * configuration. All bits may be locked via this call, including + * undefined bits. + */ +#define PR_LOCK_SHADOW_STACK_STATUS 76 + +/* + * Controls the mode of timer_create() for CRIU restore operations. + * Enabling this allows CRIU to restore timers with explicit IDs. + * + * Don't use for normal operations as the result might be undefined. + */ +#define PR_TIMER_CREATE_RESTORE_IDS 77 +# define PR_TIMER_CREATE_RESTORE_IDS_OFF 0 +# define PR_TIMER_CREATE_RESTORE_IDS_ON 1 +# define PR_TIMER_CREATE_RESTORE_IDS_GET 2 + +/* FUTEX hash management */ +#define PR_FUTEX_HASH 78 +# define PR_FUTEX_HASH_SET_SLOTS 1 +# define PR_FUTEX_HASH_GET_SLOTS 2 + +#endif /* _LINUX_PRCTL_H */ diff --git a/tools/include/uapi/linux/rtnetlink.h b/tools/include/uapi/linux/rtnetlink.h new file mode 100644 index 000000000000..dab9493c791b --- /dev/null +++ b/tools/include/uapi/linux/rtnetlink.h @@ -0,0 +1,848 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _UAPI__LINUX_RTNETLINK_H +#define _UAPI__LINUX_RTNETLINK_H + +#include <linux/types.h> +#include <linux/netlink.h> +#include <linux/if_link.h> +#include <linux/if_addr.h> +#include <linux/neighbour.h> + +/* rtnetlink families. Values up to 127 are reserved for real address + * families, values above 128 may be used arbitrarily. + */ +#define RTNL_FAMILY_IPMR 128 +#define RTNL_FAMILY_IP6MR 129 +#define RTNL_FAMILY_MAX 129 + +/**** + * Routing/neighbour discovery messages. + ****/ + +/* Types of messages */ + +enum { + RTM_BASE = 16, +#define RTM_BASE RTM_BASE + + RTM_NEWLINK = 16, +#define RTM_NEWLINK RTM_NEWLINK + RTM_DELLINK, +#define RTM_DELLINK RTM_DELLINK + RTM_GETLINK, +#define RTM_GETLINK RTM_GETLINK + RTM_SETLINK, +#define RTM_SETLINK RTM_SETLINK + + RTM_NEWADDR = 20, +#define RTM_NEWADDR RTM_NEWADDR + RTM_DELADDR, +#define RTM_DELADDR RTM_DELADDR + RTM_GETADDR, +#define RTM_GETADDR RTM_GETADDR + + RTM_NEWROUTE = 24, +#define RTM_NEWROUTE RTM_NEWROUTE + RTM_DELROUTE, +#define RTM_DELROUTE RTM_DELROUTE + RTM_GETROUTE, +#define RTM_GETROUTE RTM_GETROUTE + + RTM_NEWNEIGH = 28, +#define RTM_NEWNEIGH RTM_NEWNEIGH + RTM_DELNEIGH, +#define RTM_DELNEIGH RTM_DELNEIGH + RTM_GETNEIGH, +#define RTM_GETNEIGH RTM_GETNEIGH + + RTM_NEWRULE = 32, +#define RTM_NEWRULE RTM_NEWRULE + RTM_DELRULE, +#define RTM_DELRULE RTM_DELRULE + RTM_GETRULE, +#define RTM_GETRULE RTM_GETRULE + + RTM_NEWQDISC = 36, +#define RTM_NEWQDISC RTM_NEWQDISC + RTM_DELQDISC, +#define RTM_DELQDISC RTM_DELQDISC + RTM_GETQDISC, +#define RTM_GETQDISC RTM_GETQDISC + + RTM_NEWTCLASS = 40, +#define RTM_NEWTCLASS RTM_NEWTCLASS + RTM_DELTCLASS, +#define RTM_DELTCLASS RTM_DELTCLASS + RTM_GETTCLASS, +#define RTM_GETTCLASS RTM_GETTCLASS + + RTM_NEWTFILTER = 44, +#define RTM_NEWTFILTER RTM_NEWTFILTER + RTM_DELTFILTER, +#define RTM_DELTFILTER RTM_DELTFILTER + RTM_GETTFILTER, +#define RTM_GETTFILTER RTM_GETTFILTER + + RTM_NEWACTION = 48, +#define RTM_NEWACTION RTM_NEWACTION + RTM_DELACTION, +#define RTM_DELACTION RTM_DELACTION + RTM_GETACTION, +#define RTM_GETACTION RTM_GETACTION + + RTM_NEWPREFIX = 52, +#define RTM_NEWPREFIX RTM_NEWPREFIX + + RTM_NEWMULTICAST = 56, +#define RTM_NEWMULTICAST RTM_NEWMULTICAST + RTM_DELMULTICAST, +#define RTM_DELMULTICAST RTM_DELMULTICAST + RTM_GETMULTICAST, +#define RTM_GETMULTICAST RTM_GETMULTICAST + + RTM_NEWANYCAST = 60, +#define RTM_NEWANYCAST RTM_NEWANYCAST + RTM_DELANYCAST, +#define RTM_DELANYCAST RTM_DELANYCAST + RTM_GETANYCAST, +#define RTM_GETANYCAST RTM_GETANYCAST + + RTM_NEWNEIGHTBL = 64, +#define RTM_NEWNEIGHTBL RTM_NEWNEIGHTBL + RTM_GETNEIGHTBL = 66, +#define RTM_GETNEIGHTBL RTM_GETNEIGHTBL + RTM_SETNEIGHTBL, +#define RTM_SETNEIGHTBL RTM_SETNEIGHTBL + + RTM_NEWNDUSEROPT = 68, +#define RTM_NEWNDUSEROPT RTM_NEWNDUSEROPT + + RTM_NEWADDRLABEL = 72, +#define RTM_NEWADDRLABEL RTM_NEWADDRLABEL + RTM_DELADDRLABEL, +#define RTM_DELADDRLABEL RTM_DELADDRLABEL + RTM_GETADDRLABEL, +#define RTM_GETADDRLABEL RTM_GETADDRLABEL + + RTM_GETDCB = 78, +#define RTM_GETDCB RTM_GETDCB + RTM_SETDCB, +#define RTM_SETDCB RTM_SETDCB + + RTM_NEWNETCONF = 80, +#define RTM_NEWNETCONF RTM_NEWNETCONF + RTM_DELNETCONF, +#define RTM_DELNETCONF RTM_DELNETCONF + RTM_GETNETCONF = 82, +#define RTM_GETNETCONF RTM_GETNETCONF + + RTM_NEWMDB = 84, +#define RTM_NEWMDB RTM_NEWMDB + RTM_DELMDB = 85, +#define RTM_DELMDB RTM_DELMDB + RTM_GETMDB = 86, +#define RTM_GETMDB RTM_GETMDB + + RTM_NEWNSID = 88, +#define RTM_NEWNSID RTM_NEWNSID + RTM_DELNSID = 89, +#define RTM_DELNSID RTM_DELNSID + RTM_GETNSID = 90, +#define RTM_GETNSID RTM_GETNSID + + RTM_NEWSTATS = 92, +#define RTM_NEWSTATS RTM_NEWSTATS + RTM_GETSTATS = 94, +#define RTM_GETSTATS RTM_GETSTATS + RTM_SETSTATS, +#define RTM_SETSTATS RTM_SETSTATS + + RTM_NEWCACHEREPORT = 96, +#define RTM_NEWCACHEREPORT RTM_NEWCACHEREPORT + + RTM_NEWCHAIN = 100, +#define RTM_NEWCHAIN RTM_NEWCHAIN + RTM_DELCHAIN, +#define RTM_DELCHAIN RTM_DELCHAIN + RTM_GETCHAIN, +#define RTM_GETCHAIN RTM_GETCHAIN + + RTM_NEWNEXTHOP = 104, +#define RTM_NEWNEXTHOP RTM_NEWNEXTHOP + RTM_DELNEXTHOP, +#define RTM_DELNEXTHOP RTM_DELNEXTHOP + RTM_GETNEXTHOP, +#define RTM_GETNEXTHOP RTM_GETNEXTHOP + + RTM_NEWLINKPROP = 108, +#define RTM_NEWLINKPROP RTM_NEWLINKPROP + RTM_DELLINKPROP, +#define RTM_DELLINKPROP RTM_DELLINKPROP + RTM_GETLINKPROP, +#define RTM_GETLINKPROP RTM_GETLINKPROP + + RTM_NEWVLAN = 112, +#define RTM_NEWVLAN RTM_NEWVLAN + RTM_DELVLAN, +#define RTM_DELVLAN RTM_DELVLAN + RTM_GETVLAN, +#define RTM_GETVLAN RTM_GETVLAN + + RTM_NEWNEXTHOPBUCKET = 116, +#define RTM_NEWNEXTHOPBUCKET RTM_NEWNEXTHOPBUCKET + RTM_DELNEXTHOPBUCKET, +#define RTM_DELNEXTHOPBUCKET RTM_DELNEXTHOPBUCKET + RTM_GETNEXTHOPBUCKET, +#define RTM_GETNEXTHOPBUCKET RTM_GETNEXTHOPBUCKET + + RTM_NEWTUNNEL = 120, +#define RTM_NEWTUNNEL RTM_NEWTUNNEL + RTM_DELTUNNEL, +#define RTM_DELTUNNEL RTM_DELTUNNEL + RTM_GETTUNNEL, +#define RTM_GETTUNNEL RTM_GETTUNNEL + + __RTM_MAX, +#define RTM_MAX (((__RTM_MAX + 3) & ~3) - 1) +}; + +#define RTM_NR_MSGTYPES (RTM_MAX + 1 - RTM_BASE) +#define RTM_NR_FAMILIES (RTM_NR_MSGTYPES >> 2) +#define RTM_FAM(cmd) (((cmd) - RTM_BASE) >> 2) + +/* + Generic structure for encapsulation of optional route information. + It is reminiscent of sockaddr, but with sa_family replaced + with attribute type. + */ + +struct rtattr { + unsigned short rta_len; + unsigned short rta_type; +}; + +/* Macros to handle rtattributes */ + +#define RTA_ALIGNTO 4U +#define RTA_ALIGN(len) ( ((len)+RTA_ALIGNTO-1) & ~(RTA_ALIGNTO-1) ) +#define RTA_OK(rta,len) ((len) >= (int)sizeof(struct rtattr) && \ + (rta)->rta_len >= sizeof(struct rtattr) && \ + (rta)->rta_len <= (len)) +#define RTA_NEXT(rta,attrlen) ((attrlen) -= RTA_ALIGN((rta)->rta_len), \ + (struct rtattr*)(((char*)(rta)) + RTA_ALIGN((rta)->rta_len))) +#define RTA_LENGTH(len) (RTA_ALIGN(sizeof(struct rtattr)) + (len)) +#define RTA_SPACE(len) RTA_ALIGN(RTA_LENGTH(len)) +#define RTA_DATA(rta) ((void*)(((char*)(rta)) + RTA_LENGTH(0))) +#define RTA_PAYLOAD(rta) ((int)((rta)->rta_len) - RTA_LENGTH(0)) + + + + +/****************************************************************************** + * Definitions used in routing table administration. + ****/ + +struct rtmsg { + unsigned char rtm_family; + unsigned char rtm_dst_len; + unsigned char rtm_src_len; + unsigned char rtm_tos; + + unsigned char rtm_table; /* Routing table id */ + unsigned char rtm_protocol; /* Routing protocol; see below */ + unsigned char rtm_scope; /* See below */ + unsigned char rtm_type; /* See below */ + + unsigned rtm_flags; +}; + +/* rtm_type */ + +enum { + RTN_UNSPEC, + RTN_UNICAST, /* Gateway or direct route */ + RTN_LOCAL, /* Accept locally */ + RTN_BROADCAST, /* Accept locally as broadcast, + send as broadcast */ + RTN_ANYCAST, /* Accept locally as broadcast, + but send as unicast */ + RTN_MULTICAST, /* Multicast route */ + RTN_BLACKHOLE, /* Drop */ + RTN_UNREACHABLE, /* Destination is unreachable */ + RTN_PROHIBIT, /* Administratively prohibited */ + RTN_THROW, /* Not in this table */ + RTN_NAT, /* Translate this address */ + RTN_XRESOLVE, /* Use external resolver */ + __RTN_MAX +}; + +#define RTN_MAX (__RTN_MAX - 1) + + +/* rtm_protocol */ + +#define RTPROT_UNSPEC 0 +#define RTPROT_REDIRECT 1 /* Route installed by ICMP redirects; + not used by current IPv4 */ +#define RTPROT_KERNEL 2 /* Route installed by kernel */ +#define RTPROT_BOOT 3 /* Route installed during boot */ +#define RTPROT_STATIC 4 /* Route installed by administrator */ + +/* Values of protocol >= RTPROT_STATIC are not interpreted by kernel; + they are just passed from user and back as is. + It will be used by hypothetical multiple routing daemons. + Note that protocol values should be standardized in order to + avoid conflicts. + */ + +#define RTPROT_GATED 8 /* Apparently, GateD */ +#define RTPROT_RA 9 /* RDISC/ND router advertisements */ +#define RTPROT_MRT 10 /* Merit MRT */ +#define RTPROT_ZEBRA 11 /* Zebra */ +#define RTPROT_BIRD 12 /* BIRD */ +#define RTPROT_DNROUTED 13 /* DECnet routing daemon */ +#define RTPROT_XORP 14 /* XORP */ +#define RTPROT_NTK 15 /* Netsukuku */ +#define RTPROT_DHCP 16 /* DHCP client */ +#define RTPROT_MROUTED 17 /* Multicast daemon */ +#define RTPROT_KEEPALIVED 18 /* Keepalived daemon */ +#define RTPROT_BABEL 42 /* Babel daemon */ +#define RTPROT_OVN 84 /* OVN daemon */ +#define RTPROT_OPENR 99 /* Open Routing (Open/R) Routes */ +#define RTPROT_BGP 186 /* BGP Routes */ +#define RTPROT_ISIS 187 /* ISIS Routes */ +#define RTPROT_OSPF 188 /* OSPF Routes */ +#define RTPROT_RIP 189 /* RIP Routes */ +#define RTPROT_EIGRP 192 /* EIGRP Routes */ + +/* rtm_scope + + Really it is not scope, but sort of distance to the destination. + NOWHERE are reserved for not existing destinations, HOST is our + local addresses, LINK are destinations, located on directly attached + link and UNIVERSE is everywhere in the Universe. + + Intermediate values are also possible f.e. interior routes + could be assigned a value between UNIVERSE and LINK. +*/ + +enum rt_scope_t { + RT_SCOPE_UNIVERSE=0, +/* User defined values */ + RT_SCOPE_SITE=200, + RT_SCOPE_LINK=253, + RT_SCOPE_HOST=254, + RT_SCOPE_NOWHERE=255 +}; + +/* rtm_flags */ + +#define RTM_F_NOTIFY 0x100 /* Notify user of route change */ +#define RTM_F_CLONED 0x200 /* This route is cloned */ +#define RTM_F_EQUALIZE 0x400 /* Multipath equalizer: NI */ +#define RTM_F_PREFIX 0x800 /* Prefix addresses */ +#define RTM_F_LOOKUP_TABLE 0x1000 /* set rtm_table to FIB lookup result */ +#define RTM_F_FIB_MATCH 0x2000 /* return full fib lookup match */ +#define RTM_F_OFFLOAD 0x4000 /* route is offloaded */ +#define RTM_F_TRAP 0x8000 /* route is trapping packets */ +#define RTM_F_OFFLOAD_FAILED 0x20000000 /* route offload failed, this value + * is chosen to avoid conflicts with + * other flags defined in + * include/uapi/linux/ipv6_route.h + */ + +/* Reserved table identifiers */ + +enum rt_class_t { + RT_TABLE_UNSPEC=0, +/* User defined values */ + RT_TABLE_COMPAT=252, + RT_TABLE_DEFAULT=253, + RT_TABLE_MAIN=254, + RT_TABLE_LOCAL=255, + RT_TABLE_MAX=0xFFFFFFFF +}; + + +/* Routing message attributes */ + +enum rtattr_type_t { + RTA_UNSPEC, + RTA_DST, + RTA_SRC, + RTA_IIF, + RTA_OIF, + RTA_GATEWAY, + RTA_PRIORITY, + RTA_PREFSRC, + RTA_METRICS, + RTA_MULTIPATH, + RTA_PROTOINFO, /* no longer used */ + RTA_FLOW, + RTA_CACHEINFO, + RTA_SESSION, /* no longer used */ + RTA_MP_ALGO, /* no longer used */ + RTA_TABLE, + RTA_MARK, + RTA_MFC_STATS, + RTA_VIA, + RTA_NEWDST, + RTA_PREF, + RTA_ENCAP_TYPE, + RTA_ENCAP, + RTA_EXPIRES, + RTA_PAD, + RTA_UID, + RTA_TTL_PROPAGATE, + RTA_IP_PROTO, + RTA_SPORT, + RTA_DPORT, + RTA_NH_ID, + RTA_FLOWLABEL, + __RTA_MAX +}; + +#define RTA_MAX (__RTA_MAX - 1) + +#define RTM_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct rtmsg)))) +#define RTM_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct rtmsg)) + +/* RTM_MULTIPATH --- array of struct rtnexthop. + * + * "struct rtnexthop" describes all necessary nexthop information, + * i.e. parameters of path to a destination via this nexthop. + * + * At the moment it is impossible to set different prefsrc, mtu, window + * and rtt for different paths from multipath. + */ + +struct rtnexthop { + unsigned short rtnh_len; + unsigned char rtnh_flags; + unsigned char rtnh_hops; + int rtnh_ifindex; +}; + +/* rtnh_flags */ + +#define RTNH_F_DEAD 1 /* Nexthop is dead (used by multipath) */ +#define RTNH_F_PERVASIVE 2 /* Do recursive gateway lookup */ +#define RTNH_F_ONLINK 4 /* Gateway is forced on link */ +#define RTNH_F_OFFLOAD 8 /* Nexthop is offloaded */ +#define RTNH_F_LINKDOWN 16 /* carrier-down on nexthop */ +#define RTNH_F_UNRESOLVED 32 /* The entry is unresolved (ipmr) */ +#define RTNH_F_TRAP 64 /* Nexthop is trapping packets */ + +#define RTNH_COMPARE_MASK (RTNH_F_DEAD | RTNH_F_LINKDOWN | \ + RTNH_F_OFFLOAD | RTNH_F_TRAP) + +/* Macros to handle hexthops */ + +#define RTNH_ALIGNTO 4 +#define RTNH_ALIGN(len) ( ((len)+RTNH_ALIGNTO-1) & ~(RTNH_ALIGNTO-1) ) +#define RTNH_OK(rtnh,len) ((rtnh)->rtnh_len >= sizeof(struct rtnexthop) && \ + ((int)(rtnh)->rtnh_len) <= (len)) +#define RTNH_NEXT(rtnh) ((struct rtnexthop*)(((char*)(rtnh)) + RTNH_ALIGN((rtnh)->rtnh_len))) +#define RTNH_LENGTH(len) (RTNH_ALIGN(sizeof(struct rtnexthop)) + (len)) +#define RTNH_SPACE(len) RTNH_ALIGN(RTNH_LENGTH(len)) +#define RTNH_DATA(rtnh) ((struct rtattr*)(((char*)(rtnh)) + RTNH_LENGTH(0))) + +/* RTA_VIA */ +struct rtvia { + __kernel_sa_family_t rtvia_family; + __u8 rtvia_addr[]; +}; + +/* RTM_CACHEINFO */ + +struct rta_cacheinfo { + __u32 rta_clntref; + __u32 rta_lastuse; + __s32 rta_expires; + __u32 rta_error; + __u32 rta_used; + +#define RTNETLINK_HAVE_PEERINFO 1 + __u32 rta_id; + __u32 rta_ts; + __u32 rta_tsage; +}; + +/* RTM_METRICS --- array of struct rtattr with types of RTAX_* */ + +enum { + RTAX_UNSPEC, +#define RTAX_UNSPEC RTAX_UNSPEC + RTAX_LOCK, +#define RTAX_LOCK RTAX_LOCK + RTAX_MTU, +#define RTAX_MTU RTAX_MTU + RTAX_WINDOW, +#define RTAX_WINDOW RTAX_WINDOW + RTAX_RTT, +#define RTAX_RTT RTAX_RTT + RTAX_RTTVAR, +#define RTAX_RTTVAR RTAX_RTTVAR + RTAX_SSTHRESH, +#define RTAX_SSTHRESH RTAX_SSTHRESH + RTAX_CWND, +#define RTAX_CWND RTAX_CWND + RTAX_ADVMSS, +#define RTAX_ADVMSS RTAX_ADVMSS + RTAX_REORDERING, +#define RTAX_REORDERING RTAX_REORDERING + RTAX_HOPLIMIT, +#define RTAX_HOPLIMIT RTAX_HOPLIMIT + RTAX_INITCWND, +#define RTAX_INITCWND RTAX_INITCWND + RTAX_FEATURES, +#define RTAX_FEATURES RTAX_FEATURES + RTAX_RTO_MIN, +#define RTAX_RTO_MIN RTAX_RTO_MIN + RTAX_INITRWND, +#define RTAX_INITRWND RTAX_INITRWND + RTAX_QUICKACK, +#define RTAX_QUICKACK RTAX_QUICKACK + RTAX_CC_ALGO, +#define RTAX_CC_ALGO RTAX_CC_ALGO + RTAX_FASTOPEN_NO_COOKIE, +#define RTAX_FASTOPEN_NO_COOKIE RTAX_FASTOPEN_NO_COOKIE + __RTAX_MAX +}; + +#define RTAX_MAX (__RTAX_MAX - 1) + +#define RTAX_FEATURE_ECN (1 << 0) +#define RTAX_FEATURE_SACK (1 << 1) /* unused */ +#define RTAX_FEATURE_TIMESTAMP (1 << 2) /* unused */ +#define RTAX_FEATURE_ALLFRAG (1 << 3) /* unused */ +#define RTAX_FEATURE_TCP_USEC_TS (1 << 4) + +#define RTAX_FEATURE_MASK (RTAX_FEATURE_ECN | \ + RTAX_FEATURE_SACK | \ + RTAX_FEATURE_TIMESTAMP | \ + RTAX_FEATURE_ALLFRAG | \ + RTAX_FEATURE_TCP_USEC_TS) + +struct rta_session { + __u8 proto; + __u8 pad1; + __u16 pad2; + + union { + struct { + __u16 sport; + __u16 dport; + } ports; + + struct { + __u8 type; + __u8 code; + __u16 ident; + } icmpt; + + __u32 spi; + } u; +}; + +struct rta_mfc_stats { + __u64 mfcs_packets; + __u64 mfcs_bytes; + __u64 mfcs_wrong_if; +}; + +/**** + * General form of address family dependent message. + ****/ + +struct rtgenmsg { + unsigned char rtgen_family; +}; + +/***************************************************************** + * Link layer specific messages. + ****/ + +/* struct ifinfomsg + * passes link level specific information, not dependent + * on network protocol. + */ + +struct ifinfomsg { + unsigned char ifi_family; + unsigned char __ifi_pad; + unsigned short ifi_type; /* ARPHRD_* */ + int ifi_index; /* Link index */ + unsigned ifi_flags; /* IFF_* flags */ + unsigned ifi_change; /* IFF_* change mask */ +}; + +/******************************************************************** + * prefix information + ****/ + +struct prefixmsg { + unsigned char prefix_family; + unsigned char prefix_pad1; + unsigned short prefix_pad2; + int prefix_ifindex; + unsigned char prefix_type; + unsigned char prefix_len; + unsigned char prefix_flags; + unsigned char prefix_pad3; +}; + +enum +{ + PREFIX_UNSPEC, + PREFIX_ADDRESS, + PREFIX_CACHEINFO, + __PREFIX_MAX +}; + +#define PREFIX_MAX (__PREFIX_MAX - 1) + +struct prefix_cacheinfo { + __u32 preferred_time; + __u32 valid_time; +}; + + +/***************************************************************** + * Traffic control messages. + ****/ + +struct tcmsg { + unsigned char tcm_family; + unsigned char tcm__pad1; + unsigned short tcm__pad2; + int tcm_ifindex; + __u32 tcm_handle; + __u32 tcm_parent; +/* tcm_block_index is used instead of tcm_parent + * in case tcm_ifindex == TCM_IFINDEX_MAGIC_BLOCK + */ +#define tcm_block_index tcm_parent + __u32 tcm_info; +}; + +/* For manipulation of filters in shared block, tcm_ifindex is set to + * TCM_IFINDEX_MAGIC_BLOCK, and tcm_parent is aliased to tcm_block_index + * which is the block index. + */ +#define TCM_IFINDEX_MAGIC_BLOCK (0xFFFFFFFFU) + +enum { + TCA_UNSPEC, + TCA_KIND, + TCA_OPTIONS, + TCA_STATS, + TCA_XSTATS, + TCA_RATE, + TCA_FCNT, + TCA_STATS2, + TCA_STAB, + TCA_PAD, + TCA_DUMP_INVISIBLE, + TCA_CHAIN, + TCA_HW_OFFLOAD, + TCA_INGRESS_BLOCK, + TCA_EGRESS_BLOCK, + TCA_DUMP_FLAGS, + TCA_EXT_WARN_MSG, + __TCA_MAX +}; + +#define TCA_MAX (__TCA_MAX - 1) + +#define TCA_DUMP_FLAGS_TERSE (1 << 0) /* Means that in dump user gets only basic + * data necessary to identify the objects + * (handle, cookie, etc.) and stats. + */ + +#define TCA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcmsg)))) +#define TCA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcmsg)) + +/******************************************************************** + * Neighbor Discovery userland options + ****/ + +struct nduseroptmsg { + unsigned char nduseropt_family; + unsigned char nduseropt_pad1; + unsigned short nduseropt_opts_len; /* Total length of options */ + int nduseropt_ifindex; + __u8 nduseropt_icmp_type; + __u8 nduseropt_icmp_code; + unsigned short nduseropt_pad2; + unsigned int nduseropt_pad3; + /* Followed by one or more ND options */ +}; + +enum { + NDUSEROPT_UNSPEC, + NDUSEROPT_SRCADDR, + __NDUSEROPT_MAX +}; + +#define NDUSEROPT_MAX (__NDUSEROPT_MAX - 1) + +#ifndef __KERNEL__ +/* RTnetlink multicast groups - backwards compatibility for userspace */ +#define RTMGRP_LINK 1 +#define RTMGRP_NOTIFY 2 +#define RTMGRP_NEIGH 4 +#define RTMGRP_TC 8 + +#define RTMGRP_IPV4_IFADDR 0x10 +#define RTMGRP_IPV4_MROUTE 0x20 +#define RTMGRP_IPV4_ROUTE 0x40 +#define RTMGRP_IPV4_RULE 0x80 + +#define RTMGRP_IPV6_IFADDR 0x100 +#define RTMGRP_IPV6_MROUTE 0x200 +#define RTMGRP_IPV6_ROUTE 0x400 +#define RTMGRP_IPV6_IFINFO 0x800 + +#define RTMGRP_DECnet_IFADDR 0x1000 +#define RTMGRP_DECnet_ROUTE 0x4000 + +#define RTMGRP_IPV6_PREFIX 0x20000 +#endif + +/* RTnetlink multicast groups */ +enum rtnetlink_groups { + RTNLGRP_NONE, +#define RTNLGRP_NONE RTNLGRP_NONE + RTNLGRP_LINK, +#define RTNLGRP_LINK RTNLGRP_LINK + RTNLGRP_NOTIFY, +#define RTNLGRP_NOTIFY RTNLGRP_NOTIFY + RTNLGRP_NEIGH, +#define RTNLGRP_NEIGH RTNLGRP_NEIGH + RTNLGRP_TC, +#define RTNLGRP_TC RTNLGRP_TC + RTNLGRP_IPV4_IFADDR, +#define RTNLGRP_IPV4_IFADDR RTNLGRP_IPV4_IFADDR + RTNLGRP_IPV4_MROUTE, +#define RTNLGRP_IPV4_MROUTE RTNLGRP_IPV4_MROUTE + RTNLGRP_IPV4_ROUTE, +#define RTNLGRP_IPV4_ROUTE RTNLGRP_IPV4_ROUTE + RTNLGRP_IPV4_RULE, +#define RTNLGRP_IPV4_RULE RTNLGRP_IPV4_RULE + RTNLGRP_IPV6_IFADDR, +#define RTNLGRP_IPV6_IFADDR RTNLGRP_IPV6_IFADDR + RTNLGRP_IPV6_MROUTE, +#define RTNLGRP_IPV6_MROUTE RTNLGRP_IPV6_MROUTE + RTNLGRP_IPV6_ROUTE, +#define RTNLGRP_IPV6_ROUTE RTNLGRP_IPV6_ROUTE + RTNLGRP_IPV6_IFINFO, +#define RTNLGRP_IPV6_IFINFO RTNLGRP_IPV6_IFINFO + RTNLGRP_DECnet_IFADDR, +#define RTNLGRP_DECnet_IFADDR RTNLGRP_DECnet_IFADDR + RTNLGRP_NOP2, + RTNLGRP_DECnet_ROUTE, +#define RTNLGRP_DECnet_ROUTE RTNLGRP_DECnet_ROUTE + RTNLGRP_DECnet_RULE, +#define RTNLGRP_DECnet_RULE RTNLGRP_DECnet_RULE + RTNLGRP_NOP4, + RTNLGRP_IPV6_PREFIX, +#define RTNLGRP_IPV6_PREFIX RTNLGRP_IPV6_PREFIX + RTNLGRP_IPV6_RULE, +#define RTNLGRP_IPV6_RULE RTNLGRP_IPV6_RULE + RTNLGRP_ND_USEROPT, +#define RTNLGRP_ND_USEROPT RTNLGRP_ND_USEROPT + RTNLGRP_PHONET_IFADDR, +#define RTNLGRP_PHONET_IFADDR RTNLGRP_PHONET_IFADDR + RTNLGRP_PHONET_ROUTE, +#define RTNLGRP_PHONET_ROUTE RTNLGRP_PHONET_ROUTE + RTNLGRP_DCB, +#define RTNLGRP_DCB RTNLGRP_DCB + RTNLGRP_IPV4_NETCONF, +#define RTNLGRP_IPV4_NETCONF RTNLGRP_IPV4_NETCONF + RTNLGRP_IPV6_NETCONF, +#define RTNLGRP_IPV6_NETCONF RTNLGRP_IPV6_NETCONF + RTNLGRP_MDB, +#define RTNLGRP_MDB RTNLGRP_MDB + RTNLGRP_MPLS_ROUTE, +#define RTNLGRP_MPLS_ROUTE RTNLGRP_MPLS_ROUTE + RTNLGRP_NSID, +#define RTNLGRP_NSID RTNLGRP_NSID + RTNLGRP_MPLS_NETCONF, +#define RTNLGRP_MPLS_NETCONF RTNLGRP_MPLS_NETCONF + RTNLGRP_IPV4_MROUTE_R, +#define RTNLGRP_IPV4_MROUTE_R RTNLGRP_IPV4_MROUTE_R + RTNLGRP_IPV6_MROUTE_R, +#define RTNLGRP_IPV6_MROUTE_R RTNLGRP_IPV6_MROUTE_R + RTNLGRP_NEXTHOP, +#define RTNLGRP_NEXTHOP RTNLGRP_NEXTHOP + RTNLGRP_BRVLAN, +#define RTNLGRP_BRVLAN RTNLGRP_BRVLAN + RTNLGRP_MCTP_IFADDR, +#define RTNLGRP_MCTP_IFADDR RTNLGRP_MCTP_IFADDR + RTNLGRP_TUNNEL, +#define RTNLGRP_TUNNEL RTNLGRP_TUNNEL + RTNLGRP_STATS, +#define RTNLGRP_STATS RTNLGRP_STATS + RTNLGRP_IPV4_MCADDR, +#define RTNLGRP_IPV4_MCADDR RTNLGRP_IPV4_MCADDR + RTNLGRP_IPV6_MCADDR, +#define RTNLGRP_IPV6_MCADDR RTNLGRP_IPV6_MCADDR + RTNLGRP_IPV6_ACADDR, +#define RTNLGRP_IPV6_ACADDR RTNLGRP_IPV6_ACADDR + __RTNLGRP_MAX +}; +#define RTNLGRP_MAX (__RTNLGRP_MAX - 1) + +/* TC action piece */ +struct tcamsg { + unsigned char tca_family; + unsigned char tca__pad1; + unsigned short tca__pad2; +}; + +enum { + TCA_ROOT_UNSPEC, + TCA_ROOT_TAB, +#define TCA_ACT_TAB TCA_ROOT_TAB +#define TCAA_MAX TCA_ROOT_TAB + TCA_ROOT_FLAGS, + TCA_ROOT_COUNT, + TCA_ROOT_TIME_DELTA, /* in msecs */ + TCA_ROOT_EXT_WARN_MSG, + __TCA_ROOT_MAX, +#define TCA_ROOT_MAX (__TCA_ROOT_MAX - 1) +}; + +#define TA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcamsg)))) +#define TA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcamsg)) +/* tcamsg flags stored in attribute TCA_ROOT_FLAGS + * + * TCA_ACT_FLAG_LARGE_DUMP_ON user->kernel to request for larger than + * TCA_ACT_MAX_PRIO actions in a dump. All dump responses will contain the + * number of actions being dumped stored in for user app's consumption in + * TCA_ROOT_COUNT + * + * TCA_ACT_FLAG_TERSE_DUMP user->kernel to request terse (brief) dump that only + * includes essential action info (kind, index, etc.) + * + */ +#define TCA_FLAG_LARGE_DUMP_ON (1 << 0) +#define TCA_ACT_FLAG_LARGE_DUMP_ON TCA_FLAG_LARGE_DUMP_ON +#define TCA_ACT_FLAG_TERSE_DUMP (1 << 1) + +/* New extended info filters for IFLA_EXT_MASK */ +#define RTEXT_FILTER_VF (1 << 0) +#define RTEXT_FILTER_BRVLAN (1 << 1) +#define RTEXT_FILTER_BRVLAN_COMPRESSED (1 << 2) +#define RTEXT_FILTER_SKIP_STATS (1 << 3) +#define RTEXT_FILTER_MRP (1 << 4) +#define RTEXT_FILTER_CFM_CONFIG (1 << 5) +#define RTEXT_FILTER_CFM_STATUS (1 << 6) +#define RTEXT_FILTER_MST (1 << 7) + +/* End of information exported to user level */ + + + +#endif /* _UAPI__LINUX_RTNETLINK_H */ diff --git a/tools/include/uapi/linux/seccomp.h b/tools/include/uapi/linux/seccomp.h new file mode 100644 index 000000000000..dbfc9b37fcae --- /dev/null +++ b/tools/include/uapi/linux/seccomp.h @@ -0,0 +1,157 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _UAPI_LINUX_SECCOMP_H +#define _UAPI_LINUX_SECCOMP_H + +#include <linux/compiler.h> +#include <linux/types.h> + + +/* Valid values for seccomp.mode and prctl(PR_SET_SECCOMP, <mode>) */ +#define SECCOMP_MODE_DISABLED 0 /* seccomp is not in use. */ +#define SECCOMP_MODE_STRICT 1 /* uses hard-coded filter. */ +#define SECCOMP_MODE_FILTER 2 /* uses user-supplied filter. */ + +/* Valid operations for seccomp syscall. */ +#define SECCOMP_SET_MODE_STRICT 0 +#define SECCOMP_SET_MODE_FILTER 1 +#define SECCOMP_GET_ACTION_AVAIL 2 +#define SECCOMP_GET_NOTIF_SIZES 3 + +/* Valid flags for SECCOMP_SET_MODE_FILTER */ +#define SECCOMP_FILTER_FLAG_TSYNC (1UL << 0) +#define SECCOMP_FILTER_FLAG_LOG (1UL << 1) +#define SECCOMP_FILTER_FLAG_SPEC_ALLOW (1UL << 2) +#define SECCOMP_FILTER_FLAG_NEW_LISTENER (1UL << 3) +#define SECCOMP_FILTER_FLAG_TSYNC_ESRCH (1UL << 4) +/* Received notifications wait in killable state (only respond to fatal signals) */ +#define SECCOMP_FILTER_FLAG_WAIT_KILLABLE_RECV (1UL << 5) + +/* + * All BPF programs must return a 32-bit value. + * The bottom 16-bits are for optional return data. + * The upper 16-bits are ordered from least permissive values to most, + * as a signed value (so 0x8000000 is negative). + * + * The ordering ensures that a min_t() over composed return values always + * selects the least permissive choice. + */ +#define SECCOMP_RET_KILL_PROCESS 0x80000000U /* kill the process */ +#define SECCOMP_RET_KILL_THREAD 0x00000000U /* kill the thread */ +#define SECCOMP_RET_KILL SECCOMP_RET_KILL_THREAD +#define SECCOMP_RET_TRAP 0x00030000U /* disallow and force a SIGSYS */ +#define SECCOMP_RET_ERRNO 0x00050000U /* returns an errno */ +#define SECCOMP_RET_USER_NOTIF 0x7fc00000U /* notifies userspace */ +#define SECCOMP_RET_TRACE 0x7ff00000U /* pass to a tracer or disallow */ +#define SECCOMP_RET_LOG 0x7ffc0000U /* allow after logging */ +#define SECCOMP_RET_ALLOW 0x7fff0000U /* allow */ + +/* Masks for the return value sections. */ +#define SECCOMP_RET_ACTION_FULL 0xffff0000U +#define SECCOMP_RET_ACTION 0x7fff0000U +#define SECCOMP_RET_DATA 0x0000ffffU + +/** + * struct seccomp_data - the format the BPF program executes over. + * @nr: the system call number + * @arch: indicates system call convention as an AUDIT_ARCH_* value + * as defined in <linux/audit.h>. + * @instruction_pointer: at the time of the system call. + * @args: up to 6 system call arguments always stored as 64-bit values + * regardless of the architecture. + */ +struct seccomp_data { + int nr; + __u32 arch; + __u64 instruction_pointer; + __u64 args[6]; +}; + +struct seccomp_notif_sizes { + __u16 seccomp_notif; + __u16 seccomp_notif_resp; + __u16 seccomp_data; +}; + +struct seccomp_notif { + __u64 id; + __u32 pid; + __u32 flags; + struct seccomp_data data; +}; + +/* + * Valid flags for struct seccomp_notif_resp + * + * Note, the SECCOMP_USER_NOTIF_FLAG_CONTINUE flag must be used with caution! + * If set by the process supervising the syscalls of another process the + * syscall will continue. This is problematic because of an inherent TOCTOU. + * An attacker can exploit the time while the supervised process is waiting on + * a response from the supervising process to rewrite syscall arguments which + * are passed as pointers of the intercepted syscall. + * It should be absolutely clear that this means that the seccomp notifier + * _cannot_ be used to implement a security policy! It should only ever be used + * in scenarios where a more privileged process supervises the syscalls of a + * lesser privileged process to get around kernel-enforced security + * restrictions when the privileged process deems this safe. In other words, + * in order to continue a syscall the supervising process should be sure that + * another security mechanism or the kernel itself will sufficiently block + * syscalls if arguments are rewritten to something unsafe. + * + * Similar precautions should be applied when stacking SECCOMP_RET_USER_NOTIF + * or SECCOMP_RET_TRACE. For SECCOMP_RET_USER_NOTIF filters acting on the + * same syscall, the most recently added filter takes precedence. This means + * that the new SECCOMP_RET_USER_NOTIF filter can override any + * SECCOMP_IOCTL_NOTIF_SEND from earlier filters, essentially allowing all + * such filtered syscalls to be executed by sending the response + * SECCOMP_USER_NOTIF_FLAG_CONTINUE. Note that SECCOMP_RET_TRACE can equally + * be overriden by SECCOMP_USER_NOTIF_FLAG_CONTINUE. + */ +#define SECCOMP_USER_NOTIF_FLAG_CONTINUE (1UL << 0) + +struct seccomp_notif_resp { + __u64 id; + __s64 val; + __s32 error; + __u32 flags; +}; + +#define SECCOMP_USER_NOTIF_FD_SYNC_WAKE_UP (1UL << 0) + +/* valid flags for seccomp_notif_addfd */ +#define SECCOMP_ADDFD_FLAG_SETFD (1UL << 0) /* Specify remote fd */ +#define SECCOMP_ADDFD_FLAG_SEND (1UL << 1) /* Addfd and return it, atomically */ + +/** + * struct seccomp_notif_addfd + * @id: The ID of the seccomp notification + * @flags: SECCOMP_ADDFD_FLAG_* + * @srcfd: The local fd number + * @newfd: Optional remote FD number if SETFD option is set, otherwise 0. + * @newfd_flags: The O_* flags the remote FD should have applied + */ +struct seccomp_notif_addfd { + __u64 id; + __u32 flags; + __u32 srcfd; + __u32 newfd; + __u32 newfd_flags; +}; + +#define SECCOMP_IOC_MAGIC '!' +#define SECCOMP_IO(nr) _IO(SECCOMP_IOC_MAGIC, nr) +#define SECCOMP_IOR(nr, type) _IOR(SECCOMP_IOC_MAGIC, nr, type) +#define SECCOMP_IOW(nr, type) _IOW(SECCOMP_IOC_MAGIC, nr, type) +#define SECCOMP_IOWR(nr, type) _IOWR(SECCOMP_IOC_MAGIC, nr, type) + +/* Flags for seccomp notification fd ioctl. */ +#define SECCOMP_IOCTL_NOTIF_RECV SECCOMP_IOWR(0, struct seccomp_notif) +#define SECCOMP_IOCTL_NOTIF_SEND SECCOMP_IOWR(1, \ + struct seccomp_notif_resp) +#define SECCOMP_IOCTL_NOTIF_ID_VALID SECCOMP_IOW(2, __u64) +/* On success, the return value is the remote process's added fd number */ +#define SECCOMP_IOCTL_NOTIF_ADDFD SECCOMP_IOW(3, \ + struct seccomp_notif_addfd) + +#define SECCOMP_IOCTL_NOTIF_SET_FLAGS SECCOMP_IOW(4, __u64) + +#endif /* _UAPI_LINUX_SECCOMP_H */ diff --git a/tools/include/uapi/linux/seg6.h b/tools/include/uapi/linux/seg6.h new file mode 100644 index 000000000000..f94baf154c47 --- /dev/null +++ b/tools/include/uapi/linux/seg6.h @@ -0,0 +1,55 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * SR-IPv6 implementation + * + * Author: + * David Lebrun <david.lebrun@uclouvain.be> + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _UAPI_LINUX_SEG6_H +#define _UAPI_LINUX_SEG6_H + +#include <linux/types.h> +#include <linux/in6.h> /* For struct in6_addr. */ + +/* + * SRH + */ +struct ipv6_sr_hdr { + __u8 nexthdr; + __u8 hdrlen; + __u8 type; + __u8 segments_left; + __u8 first_segment; /* Represents the last_entry field of SRH */ + __u8 flags; + __u16 tag; + + struct in6_addr segments[]; +}; + +#define SR6_FLAG1_PROTECTED (1 << 6) +#define SR6_FLAG1_OAM (1 << 5) +#define SR6_FLAG1_ALERT (1 << 4) +#define SR6_FLAG1_HMAC (1 << 3) + +#define SR6_TLV_INGRESS 1 +#define SR6_TLV_EGRESS 2 +#define SR6_TLV_OPAQUE 3 +#define SR6_TLV_PADDING 4 +#define SR6_TLV_HMAC 5 + +#define sr_has_hmac(srh) ((srh)->flags & SR6_FLAG1_HMAC) + +struct sr6_tlv { + __u8 type; + __u8 len; + __u8 data[]; +}; + +#endif diff --git a/tools/include/uapi/linux/seg6_local.h b/tools/include/uapi/linux/seg6_local.h new file mode 100644 index 000000000000..edc138bdc56d --- /dev/null +++ b/tools/include/uapi/linux/seg6_local.h @@ -0,0 +1,80 @@ +/* + * SR-IPv6 implementation + * + * Author: + * David Lebrun <david.lebrun@uclouvain.be> + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _UAPI_LINUX_SEG6_LOCAL_H +#define _UAPI_LINUX_SEG6_LOCAL_H + +#include <linux/seg6.h> + +enum { + SEG6_LOCAL_UNSPEC, + SEG6_LOCAL_ACTION, + SEG6_LOCAL_SRH, + SEG6_LOCAL_TABLE, + SEG6_LOCAL_NH4, + SEG6_LOCAL_NH6, + SEG6_LOCAL_IIF, + SEG6_LOCAL_OIF, + SEG6_LOCAL_BPF, + __SEG6_LOCAL_MAX, +}; +#define SEG6_LOCAL_MAX (__SEG6_LOCAL_MAX - 1) + +enum { + SEG6_LOCAL_ACTION_UNSPEC = 0, + /* node segment */ + SEG6_LOCAL_ACTION_END = 1, + /* adjacency segment (IPv6 cross-connect) */ + SEG6_LOCAL_ACTION_END_X = 2, + /* lookup of next seg NH in table */ + SEG6_LOCAL_ACTION_END_T = 3, + /* decap and L2 cross-connect */ + SEG6_LOCAL_ACTION_END_DX2 = 4, + /* decap and IPv6 cross-connect */ + SEG6_LOCAL_ACTION_END_DX6 = 5, + /* decap and IPv4 cross-connect */ + SEG6_LOCAL_ACTION_END_DX4 = 6, + /* decap and lookup of DA in v6 table */ + SEG6_LOCAL_ACTION_END_DT6 = 7, + /* decap and lookup of DA in v4 table */ + SEG6_LOCAL_ACTION_END_DT4 = 8, + /* binding segment with insertion */ + SEG6_LOCAL_ACTION_END_B6 = 9, + /* binding segment with encapsulation */ + SEG6_LOCAL_ACTION_END_B6_ENCAP = 10, + /* binding segment with MPLS encap */ + SEG6_LOCAL_ACTION_END_BM = 11, + /* lookup last seg in table */ + SEG6_LOCAL_ACTION_END_S = 12, + /* forward to SR-unaware VNF with static proxy */ + SEG6_LOCAL_ACTION_END_AS = 13, + /* forward to SR-unaware VNF with masquerading */ + SEG6_LOCAL_ACTION_END_AM = 14, + /* custom BPF action */ + SEG6_LOCAL_ACTION_END_BPF = 15, + + __SEG6_LOCAL_ACTION_MAX, +}; + +#define SEG6_LOCAL_ACTION_MAX (__SEG6_LOCAL_ACTION_MAX - 1) + +enum { + SEG6_LOCAL_BPF_PROG_UNSPEC, + SEG6_LOCAL_BPF_PROG, + SEG6_LOCAL_BPF_PROG_NAME, + __SEG6_LOCAL_BPF_PROG_MAX, +}; + +#define SEG6_LOCAL_BPF_PROG_MAX (__SEG6_LOCAL_BPF_PROG_MAX - 1) + +#endif diff --git a/tools/include/uapi/linux/stat.h b/tools/include/uapi/linux/stat.h new file mode 100644 index 000000000000..1686861aae20 --- /dev/null +++ b/tools/include/uapi/linux/stat.h @@ -0,0 +1,260 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _UAPI_LINUX_STAT_H +#define _UAPI_LINUX_STAT_H + +#include <linux/types.h> + +#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) + +#define S_IFMT 00170000 +#define S_IFSOCK 0140000 +#define S_IFLNK 0120000 +#define S_IFREG 0100000 +#define S_IFBLK 0060000 +#define S_IFDIR 0040000 +#define S_IFCHR 0020000 +#define S_IFIFO 0010000 +#define S_ISUID 0004000 +#define S_ISGID 0002000 +#define S_ISVTX 0001000 + +#define S_ISLNK(m) (((m) & S_IFMT) == S_IFLNK) +#define S_ISREG(m) (((m) & S_IFMT) == S_IFREG) +#define S_ISDIR(m) (((m) & S_IFMT) == S_IFDIR) +#define S_ISCHR(m) (((m) & S_IFMT) == S_IFCHR) +#define S_ISBLK(m) (((m) & S_IFMT) == S_IFBLK) +#define S_ISFIFO(m) (((m) & S_IFMT) == S_IFIFO) +#define S_ISSOCK(m) (((m) & S_IFMT) == S_IFSOCK) + +#define S_IRWXU 00700 +#define S_IRUSR 00400 +#define S_IWUSR 00200 +#define S_IXUSR 00100 + +#define S_IRWXG 00070 +#define S_IRGRP 00040 +#define S_IWGRP 00020 +#define S_IXGRP 00010 + +#define S_IRWXO 00007 +#define S_IROTH 00004 +#define S_IWOTH 00002 +#define S_IXOTH 00001 + +#endif + +/* + * Timestamp structure for the timestamps in struct statx. + * + * tv_sec holds the number of seconds before (negative) or after (positive) + * 00:00:00 1st January 1970 UTC. + * + * tv_nsec holds a number of nanoseconds (0..999,999,999) after the tv_sec time. + * + * __reserved is held in case we need a yet finer resolution. + */ +struct statx_timestamp { + __s64 tv_sec; + __u32 tv_nsec; + __s32 __reserved; +}; + +/* + * Structures for the extended file attribute retrieval system call + * (statx()). + * + * The caller passes a mask of what they're specifically interested in as a + * parameter to statx(). What statx() actually got will be indicated in + * st_mask upon return. + * + * For each bit in the mask argument: + * + * - if the datum is not supported: + * + * - the bit will be cleared, and + * + * - the datum will be set to an appropriate fabricated value if one is + * available (eg. CIFS can take a default uid and gid), otherwise + * + * - the field will be cleared; + * + * - otherwise, if explicitly requested: + * + * - the datum will be synchronised to the server if AT_STATX_FORCE_SYNC is + * set or if the datum is considered out of date, and + * + * - the field will be filled in and the bit will be set; + * + * - otherwise, if not requested, but available in approximate form without any + * effort, it will be filled in anyway, and the bit will be set upon return + * (it might not be up to date, however, and no attempt will be made to + * synchronise the internal state first); + * + * - otherwise the field and the bit will be cleared before returning. + * + * Items in STATX_BASIC_STATS may be marked unavailable on return, but they + * will have values installed for compatibility purposes so that stat() and + * co. can be emulated in userspace. + */ +struct statx { + /* 0x00 */ + /* What results were written [uncond] */ + __u32 stx_mask; + + /* Preferred general I/O size [uncond] */ + __u32 stx_blksize; + + /* Flags conveying information about the file [uncond] */ + __u64 stx_attributes; + + /* 0x10 */ + /* Number of hard links */ + __u32 stx_nlink; + + /* User ID of owner */ + __u32 stx_uid; + + /* Group ID of owner */ + __u32 stx_gid; + + /* File mode */ + __u16 stx_mode; + __u16 __spare0[1]; + + /* 0x20 */ + /* Inode number */ + __u64 stx_ino; + + /* File size */ + __u64 stx_size; + + /* Number of 512-byte blocks allocated */ + __u64 stx_blocks; + + /* Mask to show what's supported in stx_attributes */ + __u64 stx_attributes_mask; + + /* 0x40 */ + /* Last access time */ + struct statx_timestamp stx_atime; + + /* File creation time */ + struct statx_timestamp stx_btime; + + /* Last attribute change time */ + struct statx_timestamp stx_ctime; + + /* Last data modification time */ + struct statx_timestamp stx_mtime; + + /* 0x80 */ + /* Device ID of special file [if bdev/cdev] */ + __u32 stx_rdev_major; + __u32 stx_rdev_minor; + + /* ID of device containing file [uncond] */ + __u32 stx_dev_major; + __u32 stx_dev_minor; + + /* 0x90 */ + __u64 stx_mnt_id; + + /* Memory buffer alignment for direct I/O */ + __u32 stx_dio_mem_align; + + /* File offset alignment for direct I/O */ + __u32 stx_dio_offset_align; + + /* 0xa0 */ + /* Subvolume identifier */ + __u64 stx_subvol; + + /* Min atomic write unit in bytes */ + __u32 stx_atomic_write_unit_min; + + /* Max atomic write unit in bytes */ + __u32 stx_atomic_write_unit_max; + + /* 0xb0 */ + /* Max atomic write segment count */ + __u32 stx_atomic_write_segments_max; + + /* File offset alignment for direct I/O reads */ + __u32 stx_dio_read_offset_align; + + /* Optimised max atomic write unit in bytes */ + __u32 stx_atomic_write_unit_max_opt; + __u32 __spare2[1]; + + /* 0xc0 */ + __u64 __spare3[8]; /* Spare space for future expansion */ + + /* 0x100 */ +}; + +/* + * Flags to be stx_mask + * + * Query request/result mask for statx() and struct statx::stx_mask. + * + * These bits should be set in the mask argument of statx() to request + * particular items when calling statx(). + */ +#define STATX_TYPE 0x00000001U /* Want/got stx_mode & S_IFMT */ +#define STATX_MODE 0x00000002U /* Want/got stx_mode & ~S_IFMT */ +#define STATX_NLINK 0x00000004U /* Want/got stx_nlink */ +#define STATX_UID 0x00000008U /* Want/got stx_uid */ +#define STATX_GID 0x00000010U /* Want/got stx_gid */ +#define STATX_ATIME 0x00000020U /* Want/got stx_atime */ +#define STATX_MTIME 0x00000040U /* Want/got stx_mtime */ +#define STATX_CTIME 0x00000080U /* Want/got stx_ctime */ +#define STATX_INO 0x00000100U /* Want/got stx_ino */ +#define STATX_SIZE 0x00000200U /* Want/got stx_size */ +#define STATX_BLOCKS 0x00000400U /* Want/got stx_blocks */ +#define STATX_BASIC_STATS 0x000007ffU /* The stuff in the normal stat struct */ +#define STATX_BTIME 0x00000800U /* Want/got stx_btime */ +#define STATX_MNT_ID 0x00001000U /* Got stx_mnt_id */ +#define STATX_DIOALIGN 0x00002000U /* Want/got direct I/O alignment info */ +#define STATX_MNT_ID_UNIQUE 0x00004000U /* Want/got extended stx_mount_id */ +#define STATX_SUBVOL 0x00008000U /* Want/got stx_subvol */ +#define STATX_WRITE_ATOMIC 0x00010000U /* Want/got atomic_write_* fields */ +#define STATX_DIO_READ_ALIGN 0x00020000U /* Want/got dio read alignment info */ + +#define STATX__RESERVED 0x80000000U /* Reserved for future struct statx expansion */ + +#ifndef __KERNEL__ +/* + * This is deprecated, and shall remain the same value in the future. To avoid + * confusion please use the equivalent (STATX_BASIC_STATS | STATX_BTIME) + * instead. + */ +#define STATX_ALL 0x00000fffU +#endif + +/* + * Attributes to be found in stx_attributes and masked in stx_attributes_mask. + * + * These give information about the features or the state of a file that might + * be of use to ordinary userspace programs such as GUIs or ls rather than + * specialised tools. + * + * Note that the flags marked [I] correspond to the FS_IOC_SETFLAGS flags + * semantically. Where possible, the numerical value is picked to correspond + * also. Note that the DAX attribute indicates that the file is in the CPU + * direct access state. It does not correspond to the per-inode flag that + * some filesystems support. + * + */ +#define STATX_ATTR_COMPRESSED 0x00000004 /* [I] File is compressed by the fs */ +#define STATX_ATTR_IMMUTABLE 0x00000010 /* [I] File is marked immutable */ +#define STATX_ATTR_APPEND 0x00000020 /* [I] File is append-only */ +#define STATX_ATTR_NODUMP 0x00000040 /* [I] File is not to be dumped */ +#define STATX_ATTR_ENCRYPTED 0x00000800 /* [I] File requires key to decrypt in fs */ +#define STATX_ATTR_AUTOMOUNT 0x00001000 /* Dir: Automount trigger */ +#define STATX_ATTR_MOUNT_ROOT 0x00002000 /* Root of a mount */ +#define STATX_ATTR_VERITY 0x00100000 /* [I] Verity protected file */ +#define STATX_ATTR_DAX 0x00200000 /* File is currently in DAX state */ +#define STATX_ATTR_WRITE_ATOMIC 0x00400000 /* File supports atomic write operations */ + + +#endif /* _UAPI_LINUX_STAT_H */ diff --git a/tools/include/uapi/linux/stddef.h b/tools/include/uapi/linux/stddef.h new file mode 100644 index 000000000000..c53cde425406 --- /dev/null +++ b/tools/include/uapi/linux/stddef.h @@ -0,0 +1,54 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _LINUX_STDDEF_H +#define _LINUX_STDDEF_H + + + +#ifndef __always_inline +#define __always_inline __inline__ +#endif + +/* Not all C++ standards support type declarations inside an anonymous union */ +#ifndef __cplusplus +#define __struct_group_tag(TAG) TAG +#else +#define __struct_group_tag(TAG) +#endif + +/** + * __struct_group() - Create a mirrored named and anonyomous struct + * + * @TAG: The tag name for the named sub-struct (usually empty) + * @NAME: The identifier name of the mirrored sub-struct + * @ATTRS: Any struct attributes (usually empty) + * @MEMBERS: The member declarations for the mirrored structs + * + * Used to create an anonymous union of two structs with identical layout + * and size: one anonymous and one named. The former's members can be used + * normally without sub-struct naming, and the latter can be used to + * reason about the start, end, and size of the group of struct members. + * The named struct can also be explicitly tagged for layer reuse (C only), + * as well as both having struct attributes appended. + */ +#define __struct_group(TAG, NAME, ATTRS, MEMBERS...) \ + union { \ + struct { MEMBERS } ATTRS; \ + struct __struct_group_tag(TAG) { MEMBERS } ATTRS NAME; \ + } ATTRS + +/** + * __DECLARE_FLEX_ARRAY() - Declare a flexible array usable in a union + * + * @TYPE: The type of each flexible array element + * @NAME: The name of the flexible array member + * + * In order to have a flexible array member in a union or alone in a + * struct, it needs to be wrapped in an anonymous struct with at least 1 + * named member, but that member can be empty. + */ +#define __DECLARE_FLEX_ARRAY(TYPE, NAME) \ + struct { \ + struct { } __empty_ ## NAME; \ + TYPE NAME[]; \ + } +#endif diff --git a/tools/include/uapi/linux/tc_act/tc_bpf.h b/tools/include/uapi/linux/tc_act/tc_bpf.h new file mode 100644 index 000000000000..fe6c8f8f3e8c --- /dev/null +++ b/tools/include/uapi/linux/tc_act/tc_bpf.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * Copyright (c) 2015 Jiri Pirko <jiri@resnulli.us> + */ + +#ifndef __LINUX_TC_BPF_H +#define __LINUX_TC_BPF_H + +#include <linux/pkt_cls.h> + +struct tc_act_bpf { + tc_gen; +}; + +enum { + TCA_ACT_BPF_UNSPEC, + TCA_ACT_BPF_TM, + TCA_ACT_BPF_PARMS, + TCA_ACT_BPF_OPS_LEN, + TCA_ACT_BPF_OPS, + TCA_ACT_BPF_FD, + TCA_ACT_BPF_NAME, + TCA_ACT_BPF_PAD, + TCA_ACT_BPF_TAG, + TCA_ACT_BPF_ID, + __TCA_ACT_BPF_MAX, +}; +#define TCA_ACT_BPF_MAX (__TCA_ACT_BPF_MAX - 1) + +#endif diff --git a/tools/include/uapi/linux/tcp.h b/tools/include/uapi/linux/tcp.h new file mode 100644 index 000000000000..13ceeb395eb8 --- /dev/null +++ b/tools/include/uapi/linux/tcp.h @@ -0,0 +1,357 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * Definitions for the TCP protocol. + * + * Version: @(#)tcp.h 1.0.2 04/28/93 + * + * Author: Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _UAPI_LINUX_TCP_H +#define _UAPI_LINUX_TCP_H + +#include <linux/types.h> +#include <asm/byteorder.h> +#include <linux/socket.h> + +struct tcphdr { + __be16 source; + __be16 dest; + __be32 seq; + __be32 ack_seq; +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u16 res1:4, + doff:4, + fin:1, + syn:1, + rst:1, + psh:1, + ack:1, + urg:1, + ece:1, + cwr:1; +#elif defined(__BIG_ENDIAN_BITFIELD) + __u16 doff:4, + res1:4, + cwr:1, + ece:1, + urg:1, + ack:1, + psh:1, + rst:1, + syn:1, + fin:1; +#else +#error "Adjust your <asm/byteorder.h> defines" +#endif + __be16 window; + __sum16 check; + __be16 urg_ptr; +}; + +/* + * The union cast uses a gcc extension to avoid aliasing problems + * (union is compatible to any of its members) + * This means this part of the code is -fstrict-aliasing safe now. + */ +union tcp_word_hdr { + struct tcphdr hdr; + __be32 words[5]; +}; + +#define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3]) + +enum { + TCP_FLAG_CWR = __constant_cpu_to_be32(0x00800000), + TCP_FLAG_ECE = __constant_cpu_to_be32(0x00400000), + TCP_FLAG_URG = __constant_cpu_to_be32(0x00200000), + TCP_FLAG_ACK = __constant_cpu_to_be32(0x00100000), + TCP_FLAG_PSH = __constant_cpu_to_be32(0x00080000), + TCP_FLAG_RST = __constant_cpu_to_be32(0x00040000), + TCP_FLAG_SYN = __constant_cpu_to_be32(0x00020000), + TCP_FLAG_FIN = __constant_cpu_to_be32(0x00010000), + TCP_RESERVED_BITS = __constant_cpu_to_be32(0x0F000000), + TCP_DATA_OFFSET = __constant_cpu_to_be32(0xF0000000) +}; + +/* + * TCP general constants + */ +#define TCP_MSS_DEFAULT 536U /* IPv4 (RFC1122, RFC2581) */ +#define TCP_MSS_DESIRED 1220U /* IPv6 (tunneled), EDNS0 (RFC3226) */ + +/* TCP socket options */ +#define TCP_NODELAY 1 /* Turn off Nagle's algorithm. */ +#define TCP_MAXSEG 2 /* Limit MSS */ +#define TCP_CORK 3 /* Never send partially complete segments */ +#define TCP_KEEPIDLE 4 /* Start keeplives after this period */ +#define TCP_KEEPINTVL 5 /* Interval between keepalives */ +#define TCP_KEEPCNT 6 /* Number of keepalives before death */ +#define TCP_SYNCNT 7 /* Number of SYN retransmits */ +#define TCP_LINGER2 8 /* Life time of orphaned FIN-WAIT-2 state */ +#define TCP_DEFER_ACCEPT 9 /* Wake up listener only when data arrive */ +#define TCP_WINDOW_CLAMP 10 /* Bound advertised window */ +#define TCP_INFO 11 /* Information about this connection. */ +#define TCP_QUICKACK 12 /* Block/reenable quick acks */ +#define TCP_CONGESTION 13 /* Congestion control algorithm */ +#define TCP_MD5SIG 14 /* TCP MD5 Signature (RFC2385) */ +#define TCP_THIN_LINEAR_TIMEOUTS 16 /* Use linear timeouts for thin streams*/ +#define TCP_THIN_DUPACK 17 /* Fast retrans. after 1 dupack */ +#define TCP_USER_TIMEOUT 18 /* How long for loss retry before timeout */ +#define TCP_REPAIR 19 /* TCP sock is under repair right now */ +#define TCP_REPAIR_QUEUE 20 +#define TCP_QUEUE_SEQ 21 +#define TCP_REPAIR_OPTIONS 22 +#define TCP_FASTOPEN 23 /* Enable FastOpen on listeners */ +#define TCP_TIMESTAMP 24 +#define TCP_NOTSENT_LOWAT 25 /* limit number of unsent bytes in write queue */ +#define TCP_CC_INFO 26 /* Get Congestion Control (optional) info */ +#define TCP_SAVE_SYN 27 /* Record SYN headers for new connections */ +#define TCP_SAVED_SYN 28 /* Get SYN headers recorded for connection */ +#define TCP_REPAIR_WINDOW 29 /* Get/set window parameters */ +#define TCP_FASTOPEN_CONNECT 30 /* Attempt FastOpen with connect */ +#define TCP_ULP 31 /* Attach a ULP to a TCP connection */ +#define TCP_MD5SIG_EXT 32 /* TCP MD5 Signature with extensions */ +#define TCP_FASTOPEN_KEY 33 /* Set the key for Fast Open (cookie) */ +#define TCP_FASTOPEN_NO_COOKIE 34 /* Enable TFO without a TFO cookie */ +#define TCP_ZEROCOPY_RECEIVE 35 +#define TCP_INQ 36 /* Notify bytes available to read as a cmsg on read */ + +#define TCP_CM_INQ TCP_INQ + +#define TCP_TX_DELAY 37 /* delay outgoing packets by XX usec */ + + +#define TCP_REPAIR_ON 1 +#define TCP_REPAIR_OFF 0 +#define TCP_REPAIR_OFF_NO_WP -1 /* Turn off without window probes */ + +struct tcp_repair_opt { + __u32 opt_code; + __u32 opt_val; +}; + +struct tcp_repair_window { + __u32 snd_wl1; + __u32 snd_wnd; + __u32 max_window; + + __u32 rcv_wnd; + __u32 rcv_wup; +}; + +enum { + TCP_NO_QUEUE, + TCP_RECV_QUEUE, + TCP_SEND_QUEUE, + TCP_QUEUES_NR, +}; + +/* why fastopen failed from client perspective */ +enum tcp_fastopen_client_fail { + TFO_STATUS_UNSPEC, /* catch-all */ + TFO_COOKIE_UNAVAILABLE, /* if not in TFO_CLIENT_NO_COOKIE mode */ + TFO_DATA_NOT_ACKED, /* SYN-ACK did not ack SYN data */ + TFO_SYN_RETRANSMITTED, /* SYN-ACK did not ack SYN data after timeout */ +}; + +/* for TCP_INFO socket option */ +#define TCPI_OPT_TIMESTAMPS 1 +#define TCPI_OPT_SACK 2 +#define TCPI_OPT_WSCALE 4 +#define TCPI_OPT_ECN 8 /* ECN was negociated at TCP session init */ +#define TCPI_OPT_ECN_SEEN 16 /* we received at least one packet with ECT */ +#define TCPI_OPT_SYN_DATA 32 /* SYN-ACK acked data in SYN sent or rcvd */ + +/* + * Sender's congestion state indicating normal or abnormal situations + * in the last round of packets sent. The state is driven by the ACK + * information and timer events. + */ +enum tcp_ca_state { + /* + * Nothing bad has been observed recently. + * No apparent reordering, packet loss, or ECN marks. + */ + TCP_CA_Open = 0, +#define TCPF_CA_Open (1<<TCP_CA_Open) + /* + * The sender enters disordered state when it has received DUPACKs or + * SACKs in the last round of packets sent. This could be due to packet + * loss or reordering but needs further information to confirm packets + * have been lost. + */ + TCP_CA_Disorder = 1, +#define TCPF_CA_Disorder (1<<TCP_CA_Disorder) + /* + * The sender enters Congestion Window Reduction (CWR) state when it + * has received ACKs with ECN-ECE marks, or has experienced congestion + * or packet discard on the sender host (e.g. qdisc). + */ + TCP_CA_CWR = 2, +#define TCPF_CA_CWR (1<<TCP_CA_CWR) + /* + * The sender is in fast recovery and retransmitting lost packets, + * typically triggered by ACK events. + */ + TCP_CA_Recovery = 3, +#define TCPF_CA_Recovery (1<<TCP_CA_Recovery) + /* + * The sender is in loss recovery triggered by retransmission timeout. + */ + TCP_CA_Loss = 4 +#define TCPF_CA_Loss (1<<TCP_CA_Loss) +}; + +struct tcp_info { + __u8 tcpi_state; + __u8 tcpi_ca_state; + __u8 tcpi_retransmits; + __u8 tcpi_probes; + __u8 tcpi_backoff; + __u8 tcpi_options; + __u8 tcpi_snd_wscale : 4, tcpi_rcv_wscale : 4; + __u8 tcpi_delivery_rate_app_limited:1, tcpi_fastopen_client_fail:2; + + __u32 tcpi_rto; + __u32 tcpi_ato; + __u32 tcpi_snd_mss; + __u32 tcpi_rcv_mss; + + __u32 tcpi_unacked; + __u32 tcpi_sacked; + __u32 tcpi_lost; + __u32 tcpi_retrans; + __u32 tcpi_fackets; + + /* Times. */ + __u32 tcpi_last_data_sent; + __u32 tcpi_last_ack_sent; /* Not remembered, sorry. */ + __u32 tcpi_last_data_recv; + __u32 tcpi_last_ack_recv; + + /* Metrics. */ + __u32 tcpi_pmtu; + __u32 tcpi_rcv_ssthresh; + __u32 tcpi_rtt; + __u32 tcpi_rttvar; + __u32 tcpi_snd_ssthresh; + __u32 tcpi_snd_cwnd; + __u32 tcpi_advmss; + __u32 tcpi_reordering; + + __u32 tcpi_rcv_rtt; + __u32 tcpi_rcv_space; + + __u32 tcpi_total_retrans; + + __u64 tcpi_pacing_rate; + __u64 tcpi_max_pacing_rate; + __u64 tcpi_bytes_acked; /* RFC4898 tcpEStatsAppHCThruOctetsAcked */ + __u64 tcpi_bytes_received; /* RFC4898 tcpEStatsAppHCThruOctetsReceived */ + __u32 tcpi_segs_out; /* RFC4898 tcpEStatsPerfSegsOut */ + __u32 tcpi_segs_in; /* RFC4898 tcpEStatsPerfSegsIn */ + + __u32 tcpi_notsent_bytes; + __u32 tcpi_min_rtt; + __u32 tcpi_data_segs_in; /* RFC4898 tcpEStatsDataSegsIn */ + __u32 tcpi_data_segs_out; /* RFC4898 tcpEStatsDataSegsOut */ + + __u64 tcpi_delivery_rate; + + __u64 tcpi_busy_time; /* Time (usec) busy sending data */ + __u64 tcpi_rwnd_limited; /* Time (usec) limited by receive window */ + __u64 tcpi_sndbuf_limited; /* Time (usec) limited by send buffer */ + + __u32 tcpi_delivered; + __u32 tcpi_delivered_ce; + + __u64 tcpi_bytes_sent; /* RFC4898 tcpEStatsPerfHCDataOctetsOut */ + __u64 tcpi_bytes_retrans; /* RFC4898 tcpEStatsPerfOctetsRetrans */ + __u32 tcpi_dsack_dups; /* RFC4898 tcpEStatsStackDSACKDups */ + __u32 tcpi_reord_seen; /* reordering events seen */ + + __u32 tcpi_rcv_ooopack; /* Out-of-order packets received */ + + __u32 tcpi_snd_wnd; /* peer's advertised receive window after + * scaling (bytes) + */ +}; + +/* netlink attributes types for SCM_TIMESTAMPING_OPT_STATS */ +enum { + TCP_NLA_PAD, + TCP_NLA_BUSY, /* Time (usec) busy sending data */ + TCP_NLA_RWND_LIMITED, /* Time (usec) limited by receive window */ + TCP_NLA_SNDBUF_LIMITED, /* Time (usec) limited by send buffer */ + TCP_NLA_DATA_SEGS_OUT, /* Data pkts sent including retransmission */ + TCP_NLA_TOTAL_RETRANS, /* Data pkts retransmitted */ + TCP_NLA_PACING_RATE, /* Pacing rate in bytes per second */ + TCP_NLA_DELIVERY_RATE, /* Delivery rate in bytes per second */ + TCP_NLA_SND_CWND, /* Sending congestion window */ + TCP_NLA_REORDERING, /* Reordering metric */ + TCP_NLA_MIN_RTT, /* minimum RTT */ + TCP_NLA_RECUR_RETRANS, /* Recurring retransmits for the current pkt */ + TCP_NLA_DELIVERY_RATE_APP_LMT, /* delivery rate application limited ? */ + TCP_NLA_SNDQ_SIZE, /* Data (bytes) pending in send queue */ + TCP_NLA_CA_STATE, /* ca_state of socket */ + TCP_NLA_SND_SSTHRESH, /* Slow start size threshold */ + TCP_NLA_DELIVERED, /* Data pkts delivered incl. out-of-order */ + TCP_NLA_DELIVERED_CE, /* Like above but only ones w/ CE marks */ + TCP_NLA_BYTES_SENT, /* Data bytes sent including retransmission */ + TCP_NLA_BYTES_RETRANS, /* Data bytes retransmitted */ + TCP_NLA_DSACK_DUPS, /* DSACK blocks received */ + TCP_NLA_REORD_SEEN, /* reordering events seen */ + TCP_NLA_SRTT, /* smoothed RTT in usecs */ + TCP_NLA_TIMEOUT_REHASH, /* Timeout-triggered rehash attempts */ + TCP_NLA_BYTES_NOTSENT, /* Bytes in write queue not yet sent */ + TCP_NLA_EDT, /* Earliest departure time (CLOCK_MONOTONIC) */ +}; + +/* for TCP_MD5SIG socket option */ +#define TCP_MD5SIG_MAXKEYLEN 80 + +/* tcp_md5sig extension flags for TCP_MD5SIG_EXT */ +#define TCP_MD5SIG_FLAG_PREFIX 0x1 /* address prefix length */ +#define TCP_MD5SIG_FLAG_IFINDEX 0x2 /* ifindex set */ + +struct tcp_md5sig { + struct __kernel_sockaddr_storage tcpm_addr; /* address associated */ + __u8 tcpm_flags; /* extension flags */ + __u8 tcpm_prefixlen; /* address prefix */ + __u16 tcpm_keylen; /* key length */ + int tcpm_ifindex; /* device index for scope */ + __u8 tcpm_key[TCP_MD5SIG_MAXKEYLEN]; /* key (binary) */ +}; + +/* INET_DIAG_MD5SIG */ +struct tcp_diag_md5sig { + __u8 tcpm_family; + __u8 tcpm_prefixlen; + __u16 tcpm_keylen; + __be32 tcpm_addr[4]; + __u8 tcpm_key[TCP_MD5SIG_MAXKEYLEN]; +}; + +/* setsockopt(fd, IPPROTO_TCP, TCP_ZEROCOPY_RECEIVE, ...) */ + +#define TCP_RECEIVE_ZEROCOPY_FLAG_TLB_CLEAN_HINT 0x1 +struct tcp_zerocopy_receive { + __u64 address; /* in: address of mapping */ + __u32 length; /* in/out: number of bytes to map/mapped */ + __u32 recv_skip_hint; /* out: amount of bytes to skip */ + __u32 inq; /* out: amount of bytes in read queue */ + __s32 err; /* out: socket error */ + __u64 copybuf_address; /* in: copybuf address (small reads) */ + __s32 copybuf_len; /* in/out: copybuf bytes avail/used or error */ + __u32 flags; /* in: flags */ +}; +#endif /* _UAPI_LINUX_TCP_H */ diff --git a/tools/include/uapi/linux/tls.h b/tools/include/uapi/linux/tls.h new file mode 100644 index 000000000000..ff02287495ac --- /dev/null +++ b/tools/include/uapi/linux/tls.h @@ -0,0 +1,78 @@ +/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR Linux-OpenIB) */ +/* + * Copyright (c) 2016-2017, Mellanox Technologies. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#ifndef _UAPI_LINUX_TLS_H +#define _UAPI_LINUX_TLS_H + +#include <linux/types.h> + +/* TLS socket options */ +#define TLS_TX 1 /* Set transmit parameters */ +#define TLS_RX 2 /* Set receive parameters */ + +/* Supported versions */ +#define TLS_VERSION_MINOR(ver) ((ver) & 0xFF) +#define TLS_VERSION_MAJOR(ver) (((ver) >> 8) & 0xFF) + +#define TLS_VERSION_NUMBER(id) ((((id##_VERSION_MAJOR) & 0xFF) << 8) | \ + ((id##_VERSION_MINOR) & 0xFF)) + +#define TLS_1_2_VERSION_MAJOR 0x3 +#define TLS_1_2_VERSION_MINOR 0x3 +#define TLS_1_2_VERSION TLS_VERSION_NUMBER(TLS_1_2) + +/* Supported ciphers */ +#define TLS_CIPHER_AES_GCM_128 51 +#define TLS_CIPHER_AES_GCM_128_IV_SIZE 8 +#define TLS_CIPHER_AES_GCM_128_KEY_SIZE 16 +#define TLS_CIPHER_AES_GCM_128_SALT_SIZE 4 +#define TLS_CIPHER_AES_GCM_128_TAG_SIZE 16 +#define TLS_CIPHER_AES_GCM_128_REC_SEQ_SIZE 8 + +#define TLS_SET_RECORD_TYPE 1 +#define TLS_GET_RECORD_TYPE 2 + +struct tls_crypto_info { + __u16 version; + __u16 cipher_type; +}; + +struct tls12_crypto_info_aes_gcm_128 { + struct tls_crypto_info info; + unsigned char iv[TLS_CIPHER_AES_GCM_128_IV_SIZE]; + unsigned char key[TLS_CIPHER_AES_GCM_128_KEY_SIZE]; + unsigned char salt[TLS_CIPHER_AES_GCM_128_SALT_SIZE]; + unsigned char rec_seq[TLS_CIPHER_AES_GCM_128_REC_SEQ_SIZE]; +}; + +#endif /* _UAPI_LINUX_TLS_H */ diff --git a/tools/include/uapi/linux/types.h b/tools/include/uapi/linux/types.h new file mode 100644 index 000000000000..85aa327245c6 --- /dev/null +++ b/tools/include/uapi/linux/types.h @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _UAPI_LINUX_TYPES_H +#define _UAPI_LINUX_TYPES_H + +#include <asm-generic/int-ll64.h> + +#ifndef __ASSEMBLER__ + +/* copied from linux:include/uapi/linux/types.h */ +#define __bitwise +typedef __u16 __bitwise __le16; +typedef __u16 __bitwise __be16; +typedef __u32 __bitwise __le32; +typedef __u32 __bitwise __be32; +typedef __u64 __bitwise __le64; +typedef __u64 __bitwise __be64; + +typedef __u16 __bitwise __sum16; +typedef __u32 __bitwise __wsum; + +#define __aligned_u64 __u64 __attribute__((aligned(8))) +#define __aligned_be64 __be64 __attribute__((aligned(8))) +#define __aligned_le64 __le64 __attribute__((aligned(8))) + +#endif /* __ASSEMBLER__ */ +#endif /* _UAPI_LINUX_TYPES_H */ diff --git a/tools/include/uapi/linux/userfaultfd.h b/tools/include/uapi/linux/userfaultfd.h new file mode 100644 index 000000000000..4283de22d5b6 --- /dev/null +++ b/tools/include/uapi/linux/userfaultfd.h @@ -0,0 +1,386 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * include/linux/userfaultfd.h + * + * Copyright (C) 2007 Davide Libenzi <davidel@xmailserver.org> + * Copyright (C) 2015 Red Hat, Inc. + * + */ + +#ifndef _LINUX_USERFAULTFD_H +#define _LINUX_USERFAULTFD_H + +#include <linux/types.h> + +/* ioctls for /dev/userfaultfd */ +#define USERFAULTFD_IOC 0xAA +#define USERFAULTFD_IOC_NEW _IO(USERFAULTFD_IOC, 0x00) + +/* + * If the UFFDIO_API is upgraded someday, the UFFDIO_UNREGISTER and + * UFFDIO_WAKE ioctls should be defined as _IOW and not as _IOR. In + * userfaultfd.h we assumed the kernel was reading (instead _IOC_READ + * means the userland is reading). + */ +#define UFFD_API ((__u64)0xAA) +#define UFFD_API_REGISTER_MODES (UFFDIO_REGISTER_MODE_MISSING | \ + UFFDIO_REGISTER_MODE_WP | \ + UFFDIO_REGISTER_MODE_MINOR) +#define UFFD_API_FEATURES (UFFD_FEATURE_PAGEFAULT_FLAG_WP | \ + UFFD_FEATURE_EVENT_FORK | \ + UFFD_FEATURE_EVENT_REMAP | \ + UFFD_FEATURE_EVENT_REMOVE | \ + UFFD_FEATURE_EVENT_UNMAP | \ + UFFD_FEATURE_MISSING_HUGETLBFS | \ + UFFD_FEATURE_MISSING_SHMEM | \ + UFFD_FEATURE_SIGBUS | \ + UFFD_FEATURE_THREAD_ID | \ + UFFD_FEATURE_MINOR_HUGETLBFS | \ + UFFD_FEATURE_MINOR_SHMEM | \ + UFFD_FEATURE_EXACT_ADDRESS | \ + UFFD_FEATURE_WP_HUGETLBFS_SHMEM | \ + UFFD_FEATURE_WP_UNPOPULATED | \ + UFFD_FEATURE_POISON | \ + UFFD_FEATURE_WP_ASYNC | \ + UFFD_FEATURE_MOVE) +#define UFFD_API_IOCTLS \ + ((__u64)1 << _UFFDIO_REGISTER | \ + (__u64)1 << _UFFDIO_UNREGISTER | \ + (__u64)1 << _UFFDIO_API) +#define UFFD_API_RANGE_IOCTLS \ + ((__u64)1 << _UFFDIO_WAKE | \ + (__u64)1 << _UFFDIO_COPY | \ + (__u64)1 << _UFFDIO_ZEROPAGE | \ + (__u64)1 << _UFFDIO_MOVE | \ + (__u64)1 << _UFFDIO_WRITEPROTECT | \ + (__u64)1 << _UFFDIO_CONTINUE | \ + (__u64)1 << _UFFDIO_POISON) +#define UFFD_API_RANGE_IOCTLS_BASIC \ + ((__u64)1 << _UFFDIO_WAKE | \ + (__u64)1 << _UFFDIO_COPY | \ + (__u64)1 << _UFFDIO_WRITEPROTECT | \ + (__u64)1 << _UFFDIO_CONTINUE | \ + (__u64)1 << _UFFDIO_POISON) + +/* + * Valid ioctl command number range with this API is from 0x00 to + * 0x3F. UFFDIO_API is the fixed number, everything else can be + * changed by implementing a different UFFD_API. If sticking to the + * same UFFD_API more ioctl can be added and userland will be aware of + * which ioctl the running kernel implements through the ioctl command + * bitmask written by the UFFDIO_API. + */ +#define _UFFDIO_REGISTER (0x00) +#define _UFFDIO_UNREGISTER (0x01) +#define _UFFDIO_WAKE (0x02) +#define _UFFDIO_COPY (0x03) +#define _UFFDIO_ZEROPAGE (0x04) +#define _UFFDIO_MOVE (0x05) +#define _UFFDIO_WRITEPROTECT (0x06) +#define _UFFDIO_CONTINUE (0x07) +#define _UFFDIO_POISON (0x08) +#define _UFFDIO_API (0x3F) + +/* userfaultfd ioctl ids */ +#define UFFDIO 0xAA +#define UFFDIO_API _IOWR(UFFDIO, _UFFDIO_API, \ + struct uffdio_api) +#define UFFDIO_REGISTER _IOWR(UFFDIO, _UFFDIO_REGISTER, \ + struct uffdio_register) +#define UFFDIO_UNREGISTER _IOR(UFFDIO, _UFFDIO_UNREGISTER, \ + struct uffdio_range) +#define UFFDIO_WAKE _IOR(UFFDIO, _UFFDIO_WAKE, \ + struct uffdio_range) +#define UFFDIO_COPY _IOWR(UFFDIO, _UFFDIO_COPY, \ + struct uffdio_copy) +#define UFFDIO_ZEROPAGE _IOWR(UFFDIO, _UFFDIO_ZEROPAGE, \ + struct uffdio_zeropage) +#define UFFDIO_MOVE _IOWR(UFFDIO, _UFFDIO_MOVE, \ + struct uffdio_move) +#define UFFDIO_WRITEPROTECT _IOWR(UFFDIO, _UFFDIO_WRITEPROTECT, \ + struct uffdio_writeprotect) +#define UFFDIO_CONTINUE _IOWR(UFFDIO, _UFFDIO_CONTINUE, \ + struct uffdio_continue) +#define UFFDIO_POISON _IOWR(UFFDIO, _UFFDIO_POISON, \ + struct uffdio_poison) + +/* read() structure */ +struct uffd_msg { + __u8 event; + + __u8 reserved1; + __u16 reserved2; + __u32 reserved3; + + union { + struct { + __u64 flags; + __u64 address; + union { + __u32 ptid; + } feat; + } pagefault; + + struct { + __u32 ufd; + } fork; + + struct { + __u64 from; + __u64 to; + __u64 len; + } remap; + + struct { + __u64 start; + __u64 end; + } remove; + + struct { + /* unused reserved fields */ + __u64 reserved1; + __u64 reserved2; + __u64 reserved3; + } reserved; + } arg; +} __attribute__((packed)); + +/* + * Start at 0x12 and not at 0 to be more strict against bugs. + */ +#define UFFD_EVENT_PAGEFAULT 0x12 +#define UFFD_EVENT_FORK 0x13 +#define UFFD_EVENT_REMAP 0x14 +#define UFFD_EVENT_REMOVE 0x15 +#define UFFD_EVENT_UNMAP 0x16 + +/* flags for UFFD_EVENT_PAGEFAULT */ +#define UFFD_PAGEFAULT_FLAG_WRITE (1<<0) /* If this was a write fault */ +#define UFFD_PAGEFAULT_FLAG_WP (1<<1) /* If reason is VM_UFFD_WP */ +#define UFFD_PAGEFAULT_FLAG_MINOR (1<<2) /* If reason is VM_UFFD_MINOR */ + +struct uffdio_api { + /* userland asks for an API number and the features to enable */ + __u64 api; + /* + * Kernel answers below with the all available features for + * the API, this notifies userland of which events and/or + * which flags for each event are enabled in the current + * kernel. + * + * Note: UFFD_EVENT_PAGEFAULT and UFFD_PAGEFAULT_FLAG_WRITE + * are to be considered implicitly always enabled in all kernels as + * long as the uffdio_api.api requested matches UFFD_API. + * + * UFFD_FEATURE_MISSING_HUGETLBFS means an UFFDIO_REGISTER + * with UFFDIO_REGISTER_MODE_MISSING mode will succeed on + * hugetlbfs virtual memory ranges. Adding or not adding + * UFFD_FEATURE_MISSING_HUGETLBFS to uffdio_api.features has + * no real functional effect after UFFDIO_API returns, but + * it's only useful for an initial feature set probe at + * UFFDIO_API time. There are two ways to use it: + * + * 1) by adding UFFD_FEATURE_MISSING_HUGETLBFS to the + * uffdio_api.features before calling UFFDIO_API, an error + * will be returned by UFFDIO_API on a kernel without + * hugetlbfs missing support + * + * 2) the UFFD_FEATURE_MISSING_HUGETLBFS can not be added in + * uffdio_api.features and instead it will be set by the + * kernel in the uffdio_api.features if the kernel supports + * it, so userland can later check if the feature flag is + * present in uffdio_api.features after UFFDIO_API + * succeeded. + * + * UFFD_FEATURE_MISSING_SHMEM works the same as + * UFFD_FEATURE_MISSING_HUGETLBFS, but it applies to shmem + * (i.e. tmpfs and other shmem based APIs). + * + * UFFD_FEATURE_SIGBUS feature means no page-fault + * (UFFD_EVENT_PAGEFAULT) event will be delivered, instead + * a SIGBUS signal will be sent to the faulting process. + * + * UFFD_FEATURE_THREAD_ID pid of the page faulted task_struct will + * be returned, if feature is not requested 0 will be returned. + * + * UFFD_FEATURE_MINOR_HUGETLBFS indicates that minor faults + * can be intercepted (via REGISTER_MODE_MINOR) for + * hugetlbfs-backed pages. + * + * UFFD_FEATURE_MINOR_SHMEM indicates the same support as + * UFFD_FEATURE_MINOR_HUGETLBFS, but for shmem-backed pages instead. + * + * UFFD_FEATURE_EXACT_ADDRESS indicates that the exact address of page + * faults would be provided and the offset within the page would not be + * masked. + * + * UFFD_FEATURE_WP_HUGETLBFS_SHMEM indicates that userfaultfd + * write-protection mode is supported on both shmem and hugetlbfs. + * + * UFFD_FEATURE_WP_UNPOPULATED indicates that userfaultfd + * write-protection mode will always apply to unpopulated pages + * (i.e. empty ptes). This will be the default behavior for shmem + * & hugetlbfs, so this flag only affects anonymous memory behavior + * when userfault write-protection mode is registered. + * + * UFFD_FEATURE_WP_ASYNC indicates that userfaultfd write-protection + * asynchronous mode is supported in which the write fault is + * automatically resolved and write-protection is un-set. + * It implies UFFD_FEATURE_WP_UNPOPULATED. + * + * UFFD_FEATURE_MOVE indicates that the kernel supports moving an + * existing page contents from userspace. + */ +#define UFFD_FEATURE_PAGEFAULT_FLAG_WP (1<<0) +#define UFFD_FEATURE_EVENT_FORK (1<<1) +#define UFFD_FEATURE_EVENT_REMAP (1<<2) +#define UFFD_FEATURE_EVENT_REMOVE (1<<3) +#define UFFD_FEATURE_MISSING_HUGETLBFS (1<<4) +#define UFFD_FEATURE_MISSING_SHMEM (1<<5) +#define UFFD_FEATURE_EVENT_UNMAP (1<<6) +#define UFFD_FEATURE_SIGBUS (1<<7) +#define UFFD_FEATURE_THREAD_ID (1<<8) +#define UFFD_FEATURE_MINOR_HUGETLBFS (1<<9) +#define UFFD_FEATURE_MINOR_SHMEM (1<<10) +#define UFFD_FEATURE_EXACT_ADDRESS (1<<11) +#define UFFD_FEATURE_WP_HUGETLBFS_SHMEM (1<<12) +#define UFFD_FEATURE_WP_UNPOPULATED (1<<13) +#define UFFD_FEATURE_POISON (1<<14) +#define UFFD_FEATURE_WP_ASYNC (1<<15) +#define UFFD_FEATURE_MOVE (1<<16) + __u64 features; + + __u64 ioctls; +}; + +struct uffdio_range { + __u64 start; + __u64 len; +}; + +struct uffdio_register { + struct uffdio_range range; +#define UFFDIO_REGISTER_MODE_MISSING ((__u64)1<<0) +#define UFFDIO_REGISTER_MODE_WP ((__u64)1<<1) +#define UFFDIO_REGISTER_MODE_MINOR ((__u64)1<<2) + __u64 mode; + + /* + * kernel answers which ioctl commands are available for the + * range, keep at the end as the last 8 bytes aren't read. + */ + __u64 ioctls; +}; + +struct uffdio_copy { + __u64 dst; + __u64 src; + __u64 len; +#define UFFDIO_COPY_MODE_DONTWAKE ((__u64)1<<0) + /* + * UFFDIO_COPY_MODE_WP will map the page write protected on + * the fly. UFFDIO_COPY_MODE_WP is available only if the + * write protected ioctl is implemented for the range + * according to the uffdio_register.ioctls. + */ +#define UFFDIO_COPY_MODE_WP ((__u64)1<<1) + __u64 mode; + + /* + * "copy" is written by the ioctl and must be at the end: the + * copy_from_user will not read the last 8 bytes. + */ + __s64 copy; +}; + +struct uffdio_zeropage { + struct uffdio_range range; +#define UFFDIO_ZEROPAGE_MODE_DONTWAKE ((__u64)1<<0) + __u64 mode; + + /* + * "zeropage" is written by the ioctl and must be at the end: + * the copy_from_user will not read the last 8 bytes. + */ + __s64 zeropage; +}; + +struct uffdio_writeprotect { + struct uffdio_range range; +/* + * UFFDIO_WRITEPROTECT_MODE_WP: set the flag to write protect a range, + * unset the flag to undo protection of a range which was previously + * write protected. + * + * UFFDIO_WRITEPROTECT_MODE_DONTWAKE: set the flag to avoid waking up + * any wait thread after the operation succeeds. + * + * NOTE: Write protecting a region (WP=1) is unrelated to page faults, + * therefore DONTWAKE flag is meaningless with WP=1. Removing write + * protection (WP=0) in response to a page fault wakes the faulting + * task unless DONTWAKE is set. + */ +#define UFFDIO_WRITEPROTECT_MODE_WP ((__u64)1<<0) +#define UFFDIO_WRITEPROTECT_MODE_DONTWAKE ((__u64)1<<1) + __u64 mode; +}; + +struct uffdio_continue { + struct uffdio_range range; +#define UFFDIO_CONTINUE_MODE_DONTWAKE ((__u64)1<<0) + /* + * UFFDIO_CONTINUE_MODE_WP will map the page write protected on + * the fly. UFFDIO_CONTINUE_MODE_WP is available only if the + * write protected ioctl is implemented for the range + * according to the uffdio_register.ioctls. + */ +#define UFFDIO_CONTINUE_MODE_WP ((__u64)1<<1) + __u64 mode; + + /* + * Fields below here are written by the ioctl and must be at the end: + * the copy_from_user will not read past here. + */ + __s64 mapped; +}; + +struct uffdio_poison { + struct uffdio_range range; +#define UFFDIO_POISON_MODE_DONTWAKE ((__u64)1<<0) + __u64 mode; + + /* + * Fields below here are written by the ioctl and must be at the end: + * the copy_from_user will not read past here. + */ + __s64 updated; +}; + +struct uffdio_move { + __u64 dst; + __u64 src; + __u64 len; + /* + * Especially if used to atomically remove memory from the + * address space the wake on the dst range is not needed. + */ +#define UFFDIO_MOVE_MODE_DONTWAKE ((__u64)1<<0) +#define UFFDIO_MOVE_MODE_ALLOW_SRC_HOLES ((__u64)1<<1) + __u64 mode; + /* + * "move" is written by the ioctl and must be at the end: the + * copy_from_user will not read the last 8 bytes. + */ + __s64 move; +}; + +/* + * Flags for the userfaultfd(2) system call itself. + */ + +/* + * Create a userfaultfd that can handle page faults only in user mode. + */ +#define UFFD_USER_MODE_ONLY 1 + +#endif /* _LINUX_USERFAULTFD_H */ |