diff options
Diffstat (limited to 'tools/testing/selftests/drivers/net/mlxsw/devlink_trap_policer.sh')
| -rwxr-xr-x | tools/testing/selftests/drivers/net/mlxsw/devlink_trap_policer.sh | 153 |
1 files changed, 61 insertions, 92 deletions
diff --git a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_policer.sh b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_policer.sh index 47edf099a17e..e212ad8ccef6 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_policer.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_policer.sh @@ -44,64 +44,51 @@ source $lib_dir/devlink_lib.sh h1_create() { - simple_if_init $h1 192.0.2.1/24 + adf_simple_if_init $h1 192.0.2.1/24 + mtu_set $h1 10000 + defer mtu_restore $h1 ip -4 route add default vrf v$h1 nexthop via 192.0.2.2 -} - -h1_destroy() -{ - ip -4 route del default vrf v$h1 nexthop via 192.0.2.2 - - mtu_restore $h1 - simple_if_fini $h1 192.0.2.1/24 + defer ip -4 route del default vrf v$h1 nexthop via 192.0.2.2 } h2_create() { - simple_if_init $h2 198.51.100.1/24 + adf_simple_if_init $h2 198.51.100.1/24 + mtu_set $h2 10000 + defer mtu_restore $h2 ip -4 route add default vrf v$h2 nexthop via 198.51.100.2 -} - -h2_destroy() -{ - ip -4 route del default vrf v$h2 nexthop via 198.51.100.2 - - mtu_restore $h2 - simple_if_fini $h2 198.51.100.1/24 + defer ip -4 route del default vrf v$h2 nexthop via 198.51.100.2 } router_create() { ip link set dev $rp1 up + defer ip link set dev $rp1 down + ip link set dev $rp2 up + defer ip link set dev $rp2 down __addr_add_del $rp1 add 192.0.2.2/24 + defer __addr_add_del $rp1 del 192.0.2.2/24 + __addr_add_del $rp2 add 198.51.100.2/24 + defer __addr_add_del $rp2 del 198.51.100.2/24 + mtu_set $rp1 10000 + defer mtu_restore $rp1 + mtu_set $rp2 10000 + defer mtu_restore $rp2 ip -4 route add blackhole 198.51.100.100 + defer ip -4 route del blackhole 198.51.100.100 devlink trap set $DEVLINK_DEV trap blackhole_route action trap -} - -router_destroy() -{ - devlink trap set $DEVLINK_DEV trap blackhole_route action drop - - ip -4 route del blackhole 198.51.100.100 - - mtu_restore $rp2 - mtu_restore $rp1 - __addr_add_del $rp2 del 198.51.100.2/24 - __addr_add_del $rp1 del 192.0.2.2/24 - - ip link set dev $rp2 down - ip link set dev $rp1 down + defer devlink trap set $DEVLINK_DEV trap blackhole_route action drop } setup_prepare() @@ -114,7 +101,10 @@ setup_prepare() rp1_mac=$(mac_get $rp1) - vrf_prepare + # Reload to ensure devlink-trap settings are back to default. + defer devlink_reload + + adf_vrf_prepare h1_create h2_create @@ -122,21 +112,6 @@ setup_prepare() router_create } -cleanup() -{ - pre_cleanup - - router_destroy - - h2_destroy - h1_destroy - - vrf_cleanup - - # Reload to ensure devlink-trap settings are back to default. - devlink_reload -} - rate_limits_test() { RET=0 @@ -207,21 +182,24 @@ __rate_test() RET=0 - devlink trap policer set $DEVLINK_DEV policer $id rate 1000 burst 16 + devlink trap policer set $DEVLINK_DEV policer $id rate 1000 burst 512 devlink trap group set $DEVLINK_DEV group l3_drops policer $id # Send packets at highest possible rate and make sure they are dropped # by the policer. Make sure measured received rate is about 1000 pps log_info "=== Tx rate: Highest, Policer rate: 1000 pps ===" + defer_scope_push + start_traffic $h1 192.0.2.1 198.51.100.100 $rp1_mac + defer stop_traffic $! sleep 5 # Take measurements when rate is stable rate=$(trap_rate_get) pct=$((100 * (rate - 1000) / 1000)) - ((-5 <= pct && pct <= 5)) - check_err $? "Expected rate 1000 pps, got $rate pps, which is $pct% off. Required accuracy is +-5%" + ((-10 <= pct && pct <= 10)) + check_err $? "Expected rate 1000 pps, got $rate pps, which is $pct% off. Required accuracy is +-10%" log_info "Expected rate 1000 pps, measured rate $rate pps" drop_rate=$(policer_drop_rate_get $id) @@ -229,13 +207,16 @@ __rate_test() check_err $? "Expected non-zero policer drop rate, got 0" log_info "Measured policer drop rate of $drop_rate pps" - stop_traffic + defer_scope_pop # Send packets at a rate of 1000 pps and make sure they are not dropped # by the policer log_info "=== Tx rate: 1000 pps, Policer rate: 1000 pps ===" + defer_scope_push + start_traffic $h1 192.0.2.1 198.51.100.100 $rp1_mac -d 1msec + defer stop_traffic $! sleep 5 # Take measurements when rate is stable @@ -244,7 +225,7 @@ __rate_test() check_err $? "Expected zero policer drop rate, got a drop rate of $drop_rate pps" log_info "Measured policer drop rate of $drop_rate pps" - stop_traffic + defer_scope_pop # Unbind the policer and send packets at highest possible rate. Make # sure they are not dropped by the policer and that the measured @@ -253,7 +234,10 @@ __rate_test() devlink trap group set $DEVLINK_DEV group l3_drops nopolicer + defer_scope_push + start_traffic $h1 192.0.2.1 198.51.100.100 $rp1_mac + defer stop_traffic $! rate=$(trap_rate_get) (( rate > 1000 )) @@ -265,20 +249,24 @@ __rate_test() check_err $? "Expected zero policer drop rate, got a drop rate of $drop_rate pps" log_info "Measured policer drop rate of $drop_rate pps" - stop_traffic + defer_scope_pop log_test "Trap policer rate" } rate_test() { - local id + local last_policer=$(devlink -j -p trap policer show | + jq '[.[]["'$DEVLINK_DEV'"][].policer] | max') - for id in $(devlink_trap_policer_ids_get); do - echo - log_info "Running rate test for policer $id" - __rate_test $id - done + log_info "Running rate test for policer 1" + __rate_test 1 + + log_info "Running rate test for policer $((last_policer / 2))" + __rate_test $((last_policer / 2)) + + log_info "Running rate test for policer $last_policer" + __rate_test $last_policer } __burst_test() @@ -288,35 +276,12 @@ __burst_test() RET=0 - devlink trap policer set $DEVLINK_DEV policer $id rate 1000 burst 32 + devlink trap policer set $DEVLINK_DEV policer $id rate 1000 burst 512 devlink trap group set $DEVLINK_DEV group l3_drops policer $id - # Send a burst of 64 packets and make sure that about 32 are received - # and the rest are dropped by the policer - log_info "=== Tx burst size: 64, Policer burst size: 32 pps ===" - - t0_rx=$(devlink_trap_rx_packets_get blackhole_route) - t0_drop=$(devlink_trap_policer_rx_dropped_get $id) - - start_traffic $h1 192.0.2.1 198.51.100.100 $rp1_mac -c 64 - - t1_rx=$(devlink_trap_rx_packets_get blackhole_route) - t1_drop=$(devlink_trap_policer_rx_dropped_get $id) - - rx=$((t1_rx - t0_rx)) - pct=$((100 * (rx - 32) / 32)) - ((-20 <= pct && pct <= 20)) - check_err $? "Expected burst size of 32 packets, got $rx packets, which is $pct% off. Required accuracy is +-20%" - log_info "Expected burst size of 32 packets, measured burst size of $rx packets" - - drop=$((t1_drop - t0_drop)) - (( drop > 0 )) - check_err $? "Expected non-zero policer drops, got 0" - log_info "Measured policer drops of $drop packets" - # Send a burst of 16 packets and make sure that 16 are received # and that none are dropped by the policer - log_info "=== Tx burst size: 16, Policer burst size: 32 pps ===" + log_info "=== Tx burst size: 16, Policer burst size: 512 ===" t0_rx=$(devlink_trap_rx_packets_get blackhole_route) t0_drop=$(devlink_trap_policer_rx_dropped_get $id) @@ -365,13 +330,17 @@ __burst_test() burst_test() { - local id + local last_policer=$(devlink -j -p trap policer show | + jq '[.[]["'$DEVLINK_DEV'"][].policer] | max') + + log_info "Running burst test for policer 1" + __burst_test 1 + + log_info "Running burst test for policer $((last_policer / 2))" + __burst_test $((last_policer / 2)) - for id in $(devlink_trap_policer_ids_get); do - echo - log_info "Running burst size test for policer $id" - __burst_test $id - done + log_info "Running burst test for policer $last_policer" + __burst_test $last_policer } trap cleanup EXIT |