diff options
Diffstat (limited to 'tools/testing/selftests/drivers')
105 files changed, 11924 insertions, 702 deletions
diff --git a/tools/testing/selftests/drivers/dma-buf/udmabuf.c b/tools/testing/selftests/drivers/dma-buf/udmabuf.c index c812080e304e..6062723a172e 100644 --- a/tools/testing/selftests/drivers/dma-buf/udmabuf.c +++ b/tools/testing/selftests/drivers/dma-buf/udmabuf.c @@ -9,52 +9,162 @@ #include <errno.h> #include <fcntl.h> #include <malloc.h> +#include <stdbool.h> #include <sys/ioctl.h> #include <sys/syscall.h> +#include <sys/mman.h> #include <linux/memfd.h> #include <linux/udmabuf.h> +#include "../../kselftest.h" #define TEST_PREFIX "drivers/dma-buf/udmabuf" #define NUM_PAGES 4 +#define NUM_ENTRIES 4 +#define MEMFD_SIZE 1024 /* in pages */ -static int memfd_create(const char *name, unsigned int flags) +static unsigned int page_size; + +static int create_memfd_with_seals(off64_t size, bool hpage) +{ + int memfd, ret; + unsigned int flags = MFD_ALLOW_SEALING; + + if (hpage) + flags |= MFD_HUGETLB; + + memfd = memfd_create("udmabuf-test", flags); + if (memfd < 0) { + ksft_print_msg("%s: [skip,no-memfd]\n", TEST_PREFIX); + exit(KSFT_SKIP); + } + + ret = fcntl(memfd, F_ADD_SEALS, F_SEAL_SHRINK); + if (ret < 0) { + ksft_print_msg("%s: [skip,fcntl-add-seals]\n", TEST_PREFIX); + exit(KSFT_SKIP); + } + + ret = ftruncate(memfd, size); + if (ret == -1) { + ksft_print_msg("%s: [FAIL,memfd-truncate]\n", TEST_PREFIX); + exit(KSFT_FAIL); + } + + return memfd; +} + +static int create_udmabuf_list(int devfd, int memfd, off64_t memfd_size) +{ + struct udmabuf_create_list *list; + int ubuf_fd, i; + + list = malloc(sizeof(struct udmabuf_create_list) + + sizeof(struct udmabuf_create_item) * NUM_ENTRIES); + if (!list) { + ksft_print_msg("%s: [FAIL, udmabuf-malloc]\n", TEST_PREFIX); + exit(KSFT_FAIL); + } + + for (i = 0; i < NUM_ENTRIES; i++) { + list->list[i].memfd = memfd; + list->list[i].offset = i * (memfd_size / NUM_ENTRIES); + list->list[i].size = getpagesize() * NUM_PAGES; + } + + list->count = NUM_ENTRIES; + list->flags = UDMABUF_FLAGS_CLOEXEC; + ubuf_fd = ioctl(devfd, UDMABUF_CREATE_LIST, list); + free(list); + if (ubuf_fd < 0) { + ksft_print_msg("%s: [FAIL, udmabuf-create]\n", TEST_PREFIX); + exit(KSFT_FAIL); + } + + return ubuf_fd; +} + +static void write_to_memfd(void *addr, off64_t size, char chr) +{ + int i; + + for (i = 0; i < size / page_size; i++) { + *((char *)addr + (i * page_size)) = chr; + } +} + +static void *mmap_fd(int fd, off64_t size) +{ + void *addr; + + addr = mmap(NULL, size, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0); + if (addr == MAP_FAILED) { + ksft_print_msg("%s: ubuf_fd mmap fail\n", TEST_PREFIX); + exit(KSFT_FAIL); + } + + return addr; +} + +static int compare_chunks(void *addr1, void *addr2, off64_t memfd_size) { - return syscall(__NR_memfd_create, name, flags); + off64_t off; + int i = 0, j, k = 0, ret = 0; + char char1, char2; + + while (i < NUM_ENTRIES) { + off = i * (memfd_size / NUM_ENTRIES); + for (j = 0; j < NUM_PAGES; j++, k++) { + char1 = *((char *)addr1 + off + (j * getpagesize())); + char2 = *((char *)addr2 + (k * getpagesize())); + if (char1 != char2) { + ret = -1; + goto err; + } + } + i++; + } +err: + munmap(addr1, memfd_size); + munmap(addr2, NUM_ENTRIES * NUM_PAGES * getpagesize()); + return ret; } int main(int argc, char *argv[]) { struct udmabuf_create create; int devfd, memfd, buf, ret; - off_t size; - void *mem; + off64_t size; + void *addr1, *addr2; + + ksft_print_header(); + ksft_set_plan(6); devfd = open("/dev/udmabuf", O_RDWR); if (devfd < 0) { - printf("%s: [skip,no-udmabuf: Unable to access DMA buffer device file]\n", - TEST_PREFIX); - exit(77); + ksft_print_msg( + "%s: [skip,no-udmabuf: Unable to access DMA buffer device file]\n", + TEST_PREFIX); + exit(KSFT_SKIP); } memfd = memfd_create("udmabuf-test", MFD_ALLOW_SEALING); if (memfd < 0) { - printf("%s: [skip,no-memfd]\n", TEST_PREFIX); - exit(77); + ksft_print_msg("%s: [skip,no-memfd]\n", TEST_PREFIX); + exit(KSFT_SKIP); } ret = fcntl(memfd, F_ADD_SEALS, F_SEAL_SHRINK); if (ret < 0) { - printf("%s: [skip,fcntl-add-seals]\n", TEST_PREFIX); - exit(77); + ksft_print_msg("%s: [skip,fcntl-add-seals]\n", TEST_PREFIX); + exit(KSFT_SKIP); } - size = getpagesize() * NUM_PAGES; ret = ftruncate(memfd, size); if (ret == -1) { - printf("%s: [FAIL,memfd-truncate]\n", TEST_PREFIX); - exit(1); + ksft_print_msg("%s: [FAIL,memfd-truncate]\n", TEST_PREFIX); + exit(KSFT_FAIL); } memset(&create, 0, sizeof(create)); @@ -64,44 +174,86 @@ int main(int argc, char *argv[]) create.offset = getpagesize()/2; create.size = getpagesize(); buf = ioctl(devfd, UDMABUF_CREATE, &create); - if (buf >= 0) { - printf("%s: [FAIL,test-1]\n", TEST_PREFIX); - exit(1); - } + if (buf >= 0) + ksft_test_result_fail("%s: [FAIL,test-1]\n", TEST_PREFIX); + else + ksft_test_result_pass("%s: [PASS,test-1]\n", TEST_PREFIX); /* should fail (size not multiple of page) */ create.memfd = memfd; create.offset = 0; create.size = getpagesize()/2; buf = ioctl(devfd, UDMABUF_CREATE, &create); - if (buf >= 0) { - printf("%s: [FAIL,test-2]\n", TEST_PREFIX); - exit(1); - } + if (buf >= 0) + ksft_test_result_fail("%s: [FAIL,test-2]\n", TEST_PREFIX); + else + ksft_test_result_pass("%s: [PASS,test-2]\n", TEST_PREFIX); /* should fail (not memfd) */ create.memfd = 0; /* stdin */ create.offset = 0; create.size = size; buf = ioctl(devfd, UDMABUF_CREATE, &create); - if (buf >= 0) { - printf("%s: [FAIL,test-3]\n", TEST_PREFIX); - exit(1); - } + if (buf >= 0) + ksft_test_result_fail("%s: [FAIL,test-3]\n", TEST_PREFIX); + else + ksft_test_result_pass("%s: [PASS,test-3]\n", TEST_PREFIX); /* should work */ + page_size = getpagesize(); + addr1 = mmap_fd(memfd, size); + write_to_memfd(addr1, size, 'a'); create.memfd = memfd; create.offset = 0; create.size = size; buf = ioctl(devfd, UDMABUF_CREATE, &create); - if (buf < 0) { - printf("%s: [FAIL,test-4]\n", TEST_PREFIX); - exit(1); - } + if (buf < 0) + ksft_test_result_fail("%s: [FAIL,test-4]\n", TEST_PREFIX); + else + ksft_test_result_pass("%s: [PASS,test-4]\n", TEST_PREFIX); + + munmap(addr1, size); + close(buf); + close(memfd); + + /* should work (migration of 4k size pages)*/ + size = MEMFD_SIZE * page_size; + memfd = create_memfd_with_seals(size, false); + addr1 = mmap_fd(memfd, size); + write_to_memfd(addr1, size, 'a'); + buf = create_udmabuf_list(devfd, memfd, size); + addr2 = mmap_fd(buf, NUM_PAGES * NUM_ENTRIES * getpagesize()); + write_to_memfd(addr1, size, 'b'); + ret = compare_chunks(addr1, addr2, size); + if (ret < 0) + ksft_test_result_fail("%s: [FAIL,test-5]\n", TEST_PREFIX); + else + ksft_test_result_pass("%s: [PASS,test-5]\n", TEST_PREFIX); + + close(buf); + close(memfd); + + /* should work (migration of 2MB size huge pages)*/ + page_size = getpagesize() * 512; /* 2 MB */ + size = MEMFD_SIZE * page_size; + memfd = create_memfd_with_seals(size, true); + addr1 = mmap_fd(memfd, size); + write_to_memfd(addr1, size, 'a'); + buf = create_udmabuf_list(devfd, memfd, size); + addr2 = mmap_fd(buf, NUM_PAGES * NUM_ENTRIES * getpagesize()); + write_to_memfd(addr1, size, 'b'); + ret = compare_chunks(addr1, addr2, size); + if (ret < 0) + ksft_test_result_fail("%s: [FAIL,test-6]\n", TEST_PREFIX); + else + ksft_test_result_pass("%s: [PASS,test-6]\n", TEST_PREFIX); - fprintf(stderr, "%s: ok\n", TEST_PREFIX); close(buf); close(memfd); close(devfd); + + ksft_print_msg("%s: ok\n", TEST_PREFIX); + ksft_print_cnts(); + return 0; } diff --git a/tools/testing/selftests/drivers/net/.gitignore b/tools/testing/selftests/drivers/net/.gitignore new file mode 100644 index 000000000000..d634d8395d90 --- /dev/null +++ b/tools/testing/selftests/drivers/net/.gitignore @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only +napi_id_helper diff --git a/tools/testing/selftests/drivers/net/Makefile b/tools/testing/selftests/drivers/net/Makefile new file mode 100644 index 000000000000..be780bcb73a3 --- /dev/null +++ b/tools/testing/selftests/drivers/net/Makefile @@ -0,0 +1,25 @@ +# SPDX-License-Identifier: GPL-2.0 +CFLAGS += $(KHDR_INCLUDES) + +TEST_INCLUDES := $(wildcard lib/py/*.py) \ + $(wildcard lib/sh/*.sh) \ + ../../net/lib.sh \ + +TEST_GEN_FILES := \ + napi_id_helper \ +# end of TEST_GEN_FILES + +TEST_PROGS := \ + napi_id.py \ + netcons_basic.sh \ + netcons_fragmented_msg.sh \ + netcons_overflow.sh \ + netcons_sysdata.sh \ + ping.py \ + queues.py \ + stats.py \ + shaper.py \ + hds.py \ +# end of TEST_PROGS + +include ../../lib.mk diff --git a/tools/testing/selftests/drivers/net/README.rst b/tools/testing/selftests/drivers/net/README.rst new file mode 100644 index 000000000000..eb838ae94844 --- /dev/null +++ b/tools/testing/selftests/drivers/net/README.rst @@ -0,0 +1,136 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Running driver tests +==================== + +Networking driver tests are executed within kselftest framework like any +other tests. They support testing both real device drivers and emulated / +software drivers (latter mostly to test the core parts of the stack). + +SW mode +~~~~~~~ + +By default, when no extra parameters are set or exported, tests execute +against software drivers such as netdevsim. No extra preparation is required +the software devices are created and destroyed as part of the test. +In this mode the tests are indistinguishable from other selftests and +(for example) can be run under ``virtme-ng`` like the core networking selftests. + +HW mode +~~~~~~~ + +Executing tests against a real device requires external preparation. +The netdevice against which tests will be run must exist, be running +(in UP state) and be configured with an IP address. + +Refer to list of :ref:`Variables` later in this file to set up running +the tests against a real device. + +Both modes required +~~~~~~~~~~~~~~~~~~~ + +All tests in drivers/net must support running both against a software device +and a real device. SW-only tests should instead be placed in net/ or +drivers/net/netdevsim, HW-only tests in drivers/net/hw. + +Variables +========= + +The variables can be set in the environment or by creating a net.config +file in the same directory as this README file. Example:: + + $ NETIF=eth0 ./some_test.sh + +or:: + + $ cat tools/testing/selftests/drivers/net/net.config + # Variable set in a file + NETIF=eth0 + +Local test (which don't require endpoint for sending / receiving traffic) +need only the ``NETIF`` variable. Remaining variables define the endpoint +and communication method. + +NETIF +~~~~~ + +Name of the netdevice against which the test should be executed. +When empty or not set software devices will be used. + +LOCAL_V4, LOCAL_V6, REMOTE_V4, REMOTE_V6 +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Local and remote endpoint IP addresses. + +REMOTE_TYPE +~~~~~~~~~~~ + +Communication method used to run commands on the remote endpoint. +Test framework has built-in support for ``netns`` and ``ssh`` channels. +``netns`` assumes the "remote" interface is part of the same +host, just moved to the specified netns. +``ssh`` communicates with remote endpoint over ``ssh`` and ``scp``. +Using persistent SSH connections is strongly encouraged to avoid +the latency of SSH connection setup on every command. + +Communication methods are defined by classes in ``lib/py/remote_{name}.py``. +It should be possible to add a new method without modifying any of +the framework, by simply adding an appropriately named file to ``lib/py``. + +REMOTE_ARGS +~~~~~~~~~~~ + +Arguments used to construct the communication channel. +Communication channel dependent:: + + for netns - name of the "remote" namespace + for ssh - name/address of the remote host + +Example +======= + +Build the selftests:: + + # make -C tools/testing/selftests/ TARGETS="drivers/net drivers/net/hw" + +"Install" the tests and copy them over to the target machine:: + + # make -C tools/testing/selftests/ TARGETS="drivers/net drivers/net/hw" \ + install INSTALL_PATH=/tmp/ksft-net-drv + + # rsync -ra --delete /tmp/ksft-net-drv root@192.168.1.1:/root/ + +On the target machine, running the tests will use netdevsim by default:: + + [/root] # ./ksft-net-drv/run_kselftest.sh -t drivers/net:ping.py + TAP version 13 + 1..1 + # timeout set to 45 + # selftests: drivers/net: ping.py + # TAP version 13 + # 1..3 + # ok 1 ping.test_v4 + # ok 2 ping.test_v6 + # ok 3 ping.test_tcp + # # Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0 + ok 1 selftests: drivers/net: ping.py + +Create a config with remote info:: + + [/root] # cat > ./ksft-net-drv/drivers/net/net.config <<EOF + NETIF=eth0 + LOCAL_V4=192.168.1.1 + REMOTE_V4=192.168.1.2 + REMOTE_TYPE=ssh + REMOTE_ARGS=root@192.168.1.2 + EOF + +Run the test:: + + [/root] # ./ksft-net-drv/drivers/net/ping.py + TAP version 13 + 1..3 + ok 1 ping.test_v4 + ok 2 ping.test_v6 # SKIP Test requires IPv6 connectivity + ok 3 ping.test_tcp + # Totals: pass:2 fail:0 xfail:0 xpass:0 skip:1 error:0 diff --git a/tools/testing/selftests/drivers/net/bonding/Makefile b/tools/testing/selftests/drivers/net/bonding/Makefile index 03a089165d3f..2b10854e4b1e 100644 --- a/tools/testing/selftests/drivers/net/bonding/Makefile +++ b/tools/testing/selftests/drivers/net/bonding/Makefile @@ -10,7 +10,7 @@ TEST_PROGS := \ mode-2-recovery-updelay.sh \ bond_options.sh \ bond-eth-type-change.sh \ - bond_macvlan.sh + bond_macvlan_ipvlan.sh TEST_FILES := \ lag_lib.sh \ diff --git a/tools/testing/selftests/drivers/net/bonding/bond_macvlan.sh b/tools/testing/selftests/drivers/net/bonding/bond_macvlan.sh deleted file mode 100755 index b609fb6231f4..000000000000 --- a/tools/testing/selftests/drivers/net/bonding/bond_macvlan.sh +++ /dev/null @@ -1,99 +0,0 @@ -#!/bin/bash -# SPDX-License-Identifier: GPL-2.0 -# -# Test macvlan over balance-alb - -lib_dir=$(dirname "$0") -source ${lib_dir}/bond_topo_2d1c.sh - -m1_ns="m1-$(mktemp -u XXXXXX)" -m2_ns="m1-$(mktemp -u XXXXXX)" -m1_ip4="192.0.2.11" -m1_ip6="2001:db8::11" -m2_ip4="192.0.2.12" -m2_ip6="2001:db8::12" - -cleanup() -{ - ip -n ${m1_ns} link del macv0 - ip netns del ${m1_ns} - ip -n ${m2_ns} link del macv0 - ip netns del ${m2_ns} - - client_destroy - server_destroy - gateway_destroy -} - -check_connection() -{ - local ns=${1} - local target=${2} - local message=${3:-"macvlan_over_bond"} - RET=0 - - - ip netns exec ${ns} ping ${target} -c 4 -i 0.1 &>/dev/null - check_err $? "ping failed" - log_test "$mode: $message" -} - -macvlan_over_bond() -{ - local param="$1" - RET=0 - - # setup new bond mode - bond_reset "${param}" - - ip -n ${s_ns} link add link bond0 name macv0 type macvlan mode bridge - ip -n ${s_ns} link set macv0 netns ${m1_ns} - ip -n ${m1_ns} link set dev macv0 up - ip -n ${m1_ns} addr add ${m1_ip4}/24 dev macv0 - ip -n ${m1_ns} addr add ${m1_ip6}/24 dev macv0 - - ip -n ${s_ns} link add link bond0 name macv0 type macvlan mode bridge - ip -n ${s_ns} link set macv0 netns ${m2_ns} - ip -n ${m2_ns} link set dev macv0 up - ip -n ${m2_ns} addr add ${m2_ip4}/24 dev macv0 - ip -n ${m2_ns} addr add ${m2_ip6}/24 dev macv0 - - sleep 2 - - check_connection "${c_ns}" "${s_ip4}" "IPv4: client->server" - check_connection "${c_ns}" "${s_ip6}" "IPv6: client->server" - check_connection "${c_ns}" "${m1_ip4}" "IPv4: client->macvlan_1" - check_connection "${c_ns}" "${m1_ip6}" "IPv6: client->macvlan_1" - check_connection "${c_ns}" "${m2_ip4}" "IPv4: client->macvlan_2" - check_connection "${c_ns}" "${m2_ip6}" "IPv6: client->macvlan_2" - check_connection "${m1_ns}" "${m2_ip4}" "IPv4: macvlan_1->macvlan_2" - check_connection "${m1_ns}" "${m2_ip6}" "IPv6: macvlan_1->macvlan_2" - - - sleep 5 - - check_connection "${s_ns}" "${c_ip4}" "IPv4: server->client" - check_connection "${s_ns}" "${c_ip6}" "IPv6: server->client" - check_connection "${m1_ns}" "${c_ip4}" "IPv4: macvlan_1->client" - check_connection "${m1_ns}" "${c_ip6}" "IPv6: macvlan_1->client" - check_connection "${m2_ns}" "${c_ip4}" "IPv4: macvlan_2->client" - check_connection "${m2_ns}" "${c_ip6}" "IPv6: macvlan_2->client" - check_connection "${m2_ns}" "${m1_ip4}" "IPv4: macvlan_2->macvlan_2" - check_connection "${m2_ns}" "${m1_ip6}" "IPv6: macvlan_2->macvlan_2" - - ip -n ${c_ns} neigh flush dev eth0 -} - -trap cleanup EXIT - -setup_prepare -ip netns add ${m1_ns} -ip netns add ${m2_ns} - -modes="active-backup balance-tlb balance-alb" - -for mode in $modes; do - macvlan_over_bond "mode $mode" -done - -exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/bonding/bond_macvlan_ipvlan.sh b/tools/testing/selftests/drivers/net/bonding/bond_macvlan_ipvlan.sh new file mode 100755 index 000000000000..c4711272fe45 --- /dev/null +++ b/tools/testing/selftests/drivers/net/bonding/bond_macvlan_ipvlan.sh @@ -0,0 +1,96 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test macvlan/ipvlan over bond + +lib_dir=$(dirname "$0") +source ${lib_dir}/bond_topo_2d1c.sh + +xvlan1_ns="xvlan1-$(mktemp -u XXXXXX)" +xvlan2_ns="xvlan2-$(mktemp -u XXXXXX)" +xvlan1_ip4="192.0.2.11" +xvlan1_ip6="2001:db8::11" +xvlan2_ip4="192.0.2.12" +xvlan2_ip6="2001:db8::12" + +cleanup() +{ + client_destroy + server_destroy + gateway_destroy + + ip netns del ${xvlan1_ns} + ip netns del ${xvlan2_ns} +} + +check_connection() +{ + local ns=${1} + local target=${2} + local message=${3} + RET=0 + + ip netns exec ${ns} ping ${target} -c 4 -i 0.1 &>/dev/null + check_err $? "ping failed" + log_test "${bond_mode}/${xvlan_type}_${xvlan_mode}: ${message}" +} + +xvlan_over_bond() +{ + local param="$1" + local xvlan_type="$2" + local xvlan_mode="$3" + RET=0 + + # setup new bond mode + bond_reset "${param}" + + ip -n ${s_ns} link add link bond0 name ${xvlan_type}0 type ${xvlan_type} mode ${xvlan_mode} + ip -n ${s_ns} link set ${xvlan_type}0 netns ${xvlan1_ns} + ip -n ${xvlan1_ns} link set dev ${xvlan_type}0 up + ip -n ${xvlan1_ns} addr add ${xvlan1_ip4}/24 dev ${xvlan_type}0 + ip -n ${xvlan1_ns} addr add ${xvlan1_ip6}/24 dev ${xvlan_type}0 + + ip -n ${s_ns} link add link bond0 name ${xvlan_type}0 type ${xvlan_type} mode ${xvlan_mode} + ip -n ${s_ns} link set ${xvlan_type}0 netns ${xvlan2_ns} + ip -n ${xvlan2_ns} link set dev ${xvlan_type}0 up + ip -n ${xvlan2_ns} addr add ${xvlan2_ip4}/24 dev ${xvlan_type}0 + ip -n ${xvlan2_ns} addr add ${xvlan2_ip6}/24 dev ${xvlan_type}0 + + sleep 2 + + check_connection "${c_ns}" "${s_ip4}" "IPv4: client->server" + check_connection "${c_ns}" "${s_ip6}" "IPv6: client->server" + check_connection "${c_ns}" "${xvlan1_ip4}" "IPv4: client->${xvlan_type}_1" + check_connection "${c_ns}" "${xvlan1_ip6}" "IPv6: client->${xvlan_type}_1" + check_connection "${c_ns}" "${xvlan2_ip4}" "IPv4: client->${xvlan_type}_2" + check_connection "${c_ns}" "${xvlan2_ip6}" "IPv6: client->${xvlan_type}_2" + check_connection "${xvlan1_ns}" "${xvlan2_ip4}" "IPv4: ${xvlan_type}_1->${xvlan_type}_2" + check_connection "${xvlan1_ns}" "${xvlan2_ip6}" "IPv6: ${xvlan_type}_1->${xvlan_type}_2" + + check_connection "${s_ns}" "${c_ip4}" "IPv4: server->client" + check_connection "${s_ns}" "${c_ip6}" "IPv6: server->client" + check_connection "${xvlan1_ns}" "${c_ip4}" "IPv4: ${xvlan_type}_1->client" + check_connection "${xvlan1_ns}" "${c_ip6}" "IPv6: ${xvlan_type}_1->client" + check_connection "${xvlan2_ns}" "${c_ip4}" "IPv4: ${xvlan_type}_2->client" + check_connection "${xvlan2_ns}" "${c_ip6}" "IPv6: ${xvlan_type}_2->client" + check_connection "${xvlan2_ns}" "${xvlan1_ip4}" "IPv4: ${xvlan_type}_2->${xvlan_type}_1" + check_connection "${xvlan2_ns}" "${xvlan1_ip6}" "IPv6: ${xvlan_type}_2->${xvlan_type}_1" + + ip -n ${c_ns} neigh flush dev eth0 +} + +trap cleanup EXIT + +setup_prepare +ip netns add ${xvlan1_ns} +ip netns add ${xvlan2_ns} + +bond_modes="active-backup balance-tlb balance-alb" + +for bond_mode in ${bond_modes}; do + xvlan_over_bond "mode ${bond_mode}" macvlan bridge + xvlan_over_bond "mode ${bond_mode}" ipvlan l2 +done + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/bonding/bond_options.sh b/tools/testing/selftests/drivers/net/bonding/bond_options.sh index 41d0859feb7d..7bc148889ca7 100755 --- a/tools/testing/selftests/drivers/net/bonding/bond_options.sh +++ b/tools/testing/selftests/drivers/net/bonding/bond_options.sh @@ -11,6 +11,8 @@ ALL_TESTS=" lib_dir=$(dirname "$0") source ${lib_dir}/bond_topo_3d1c.sh +c_maddr="33:33:ff:00:00:10" +g_maddr="33:33:ff:00:02:54" skip_prio() { @@ -240,6 +242,54 @@ arp_validate_test() done } +# Testing correct multicast groups are added to slaves for ns targets +arp_validate_mcast() +{ + RET=0 + local arp_valid=$(cmd_jq "ip -n ${s_ns} -j -d link show bond0" ".[].linkinfo.info_data.arp_validate") + local active_slave=$(cmd_jq "ip -n ${s_ns} -d -j link show bond0" ".[].linkinfo.info_data.active_slave") + + for i in $(seq 0 2); do + maddr_list=$(ip -n ${s_ns} maddr show dev eth${i}) + + # arp_valid == 0 or active_slave should not join any maddrs + if { [ "$arp_valid" == "null" ] || [ "eth${i}" == ${active_slave} ]; } && \ + echo "$maddr_list" | grep -qE "${c_maddr}|${g_maddr}"; then + RET=1 + check_err 1 "arp_valid $arp_valid active_slave $active_slave, eth$i has mcast group" + # arp_valid != 0 and backup_slave should join both maddrs + elif [ "$arp_valid" != "null" ] && [ "eth${i}" != ${active_slave} ] && \ + ( ! echo "$maddr_list" | grep -q "${c_maddr}" || \ + ! echo "$maddr_list" | grep -q "${m_maddr}"); then + RET=1 + check_err 1 "arp_valid $arp_valid active_slave $active_slave, eth$i has mcast group" + fi + done + + # Do failover + ip -n ${s_ns} link set ${active_slave} down + # wait for active link change + slowwait 2 active_slave_changed $active_slave + active_slave=$(cmd_jq "ip -n ${s_ns} -d -j link show bond0" ".[].linkinfo.info_data.active_slave") + + for i in $(seq 0 2); do + maddr_list=$(ip -n ${s_ns} maddr show dev eth${i}) + + # arp_valid == 0 or active_slave should not join any maddrs + if { [ "$arp_valid" == "null" ] || [ "eth${i}" == ${active_slave} ]; } && \ + echo "$maddr_list" | grep -qE "${c_maddr}|${g_maddr}"; then + RET=1 + check_err 1 "arp_valid $arp_valid active_slave $active_slave, eth$i has mcast group" + # arp_valid != 0 and backup_slave should join both maddrs + elif [ "$arp_valid" != "null" ] && [ "eth${i}" != ${active_slave} ] && \ + ( ! echo "$maddr_list" | grep -q "${c_maddr}" || \ + ! echo "$maddr_list" | grep -q "${m_maddr}"); then + RET=1 + check_err 1 "arp_valid $arp_valid active_slave $active_slave, eth$i has mcast group" + fi + done +} + arp_validate_arp() { local mode=$1 @@ -261,8 +311,10 @@ arp_validate_ns() fi for val in $(seq 0 6); do - arp_validate_test "mode $mode arp_interval 100 ns_ip6_target ${g_ip6} arp_validate $val" + arp_validate_test "mode $mode arp_interval 100 ns_ip6_target ${g_ip6},${c_ip6} arp_validate $val" log_test "arp_validate" "$mode ns_ip6_target arp_validate $val" + arp_validate_mcast + log_test "arp_validate" "join mcast group" done } diff --git a/tools/testing/selftests/drivers/net/bonding/config b/tools/testing/selftests/drivers/net/bonding/config index 899d7fb6ea8e..dad4e5fda4db 100644 --- a/tools/testing/selftests/drivers/net/bonding/config +++ b/tools/testing/selftests/drivers/net/bonding/config @@ -3,6 +3,7 @@ CONFIG_BRIDGE=y CONFIG_DUMMY=y CONFIG_IPV6=y CONFIG_MACVLAN=y +CONFIG_IPVLAN=y CONFIG_NET_ACT_GACT=y CONFIG_NET_CLS_FLOWER=y CONFIG_NET_SCH_INGRESS=y diff --git a/tools/testing/selftests/drivers/net/config b/tools/testing/selftests/drivers/net/config new file mode 100644 index 000000000000..f27172ddee0a --- /dev/null +++ b/tools/testing/selftests/drivers/net/config @@ -0,0 +1,7 @@ +CONFIG_IPV6=y +CONFIG_NETDEVSIM=m +CONFIG_CONFIGFS_FS=y +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_NETCONSOLE_EXTENDED_LOG=y +CONFIG_XDP_SOCKETS=y diff --git a/tools/testing/selftests/drivers/net/dsa/tc_taprio.sh b/tools/testing/selftests/drivers/net/dsa/tc_taprio.sh new file mode 120000 index 000000000000..d16a65e7595d --- /dev/null +++ b/tools/testing/selftests/drivers/net/dsa/tc_taprio.sh @@ -0,0 +1 @@ +run_net_forwarding_test.sh
\ No newline at end of file diff --git a/tools/testing/selftests/drivers/net/hds.py b/tools/testing/selftests/drivers/net/hds.py new file mode 100755 index 000000000000..7c90a040ce45 --- /dev/null +++ b/tools/testing/selftests/drivers/net/hds.py @@ -0,0 +1,289 @@ +#!/usr/bin/env python3 +# SPDX-License-Identifier: GPL-2.0 + +import errno +import os +from lib.py import ksft_run, ksft_exit, ksft_eq, ksft_raises, KsftSkipEx +from lib.py import CmdExitFailure, EthtoolFamily, NlError +from lib.py import NetDrvEnv +from lib.py import defer, ethtool, ip, random + + +def _get_hds_mode(cfg, netnl) -> str: + try: + rings = netnl.rings_get({'header': {'dev-index': cfg.ifindex}}) + except NlError as e: + raise KsftSkipEx('ring-get not supported by device') + if 'tcp-data-split' not in rings: + raise KsftSkipEx('tcp-data-split not supported by device') + return rings['tcp-data-split'] + + +def _xdp_onoff(cfg): + prog = cfg.net_lib_dir / "xdp_dummy.bpf.o" + ip("link set dev %s xdp obj %s sec xdp" % + (cfg.ifname, prog)) + ip("link set dev %s xdp off" % cfg.ifname) + + +def _ioctl_ringparam_modify(cfg, netnl) -> None: + """ + Helper for performing a hopefully unimportant IOCTL SET. + IOCTL does not support HDS, so it should not affect the HDS config. + """ + try: + rings = netnl.rings_get({'header': {'dev-index': cfg.ifindex}}) + except NlError as e: + raise KsftSkipEx('ring-get not supported by device') + + if 'tx' not in rings: + raise KsftSkipEx('setting Tx ring size not supported') + + try: + ethtool(f"--disable-netlink -G {cfg.ifname} tx {rings['tx'] // 2}") + except CmdExitFailure as e: + ethtool(f"--disable-netlink -G {cfg.ifname} tx {rings['tx'] * 2}") + defer(ethtool, f"-G {cfg.ifname} tx {rings['tx']}") + + +def get_hds(cfg, netnl) -> None: + _get_hds_mode(cfg, netnl) + + +def get_hds_thresh(cfg, netnl) -> None: + try: + rings = netnl.rings_get({'header': {'dev-index': cfg.ifindex}}) + except NlError as e: + raise KsftSkipEx('ring-get not supported by device') + if 'hds-thresh' not in rings: + raise KsftSkipEx('hds-thresh not supported by device') + +def set_hds_enable(cfg, netnl) -> None: + try: + netnl.rings_set({'header': {'dev-index': cfg.ifindex}, 'tcp-data-split': 'enabled'}) + except NlError as e: + if e.error == errno.EINVAL: + raise KsftSkipEx("disabling of HDS not supported by the device") + elif e.error == errno.EOPNOTSUPP: + raise KsftSkipEx("ring-set not supported by the device") + try: + rings = netnl.rings_get({'header': {'dev-index': cfg.ifindex}}) + except NlError as e: + raise KsftSkipEx('ring-get not supported by device') + if 'tcp-data-split' not in rings: + raise KsftSkipEx('tcp-data-split not supported by device') + + ksft_eq('enabled', rings['tcp-data-split']) + +def set_hds_disable(cfg, netnl) -> None: + try: + netnl.rings_set({'header': {'dev-index': cfg.ifindex}, 'tcp-data-split': 'disabled'}) + except NlError as e: + if e.error == errno.EINVAL: + raise KsftSkipEx("disabling of HDS not supported by the device") + elif e.error == errno.EOPNOTSUPP: + raise KsftSkipEx("ring-set not supported by the device") + try: + rings = netnl.rings_get({'header': {'dev-index': cfg.ifindex}}) + except NlError as e: + raise KsftSkipEx('ring-get not supported by device') + if 'tcp-data-split' not in rings: + raise KsftSkipEx('tcp-data-split not supported by device') + + ksft_eq('disabled', rings['tcp-data-split']) + +def set_hds_thresh_zero(cfg, netnl) -> None: + try: + netnl.rings_set({'header': {'dev-index': cfg.ifindex}, 'hds-thresh': 0}) + except NlError as e: + if e.error == errno.EINVAL: + raise KsftSkipEx("hds-thresh-set not supported by the device") + elif e.error == errno.EOPNOTSUPP: + raise KsftSkipEx("ring-set not supported by the device") + try: + rings = netnl.rings_get({'header': {'dev-index': cfg.ifindex}}) + except NlError as e: + raise KsftSkipEx('ring-get not supported by device') + if 'hds-thresh' not in rings: + raise KsftSkipEx('hds-thresh not supported by device') + + ksft_eq(0, rings['hds-thresh']) + +def set_hds_thresh_random(cfg, netnl) -> None: + try: + rings = netnl.rings_get({'header': {'dev-index': cfg.ifindex}}) + except NlError as e: + raise KsftSkipEx('ring-get not supported by device') + if 'hds-thresh' not in rings: + raise KsftSkipEx('hds-thresh not supported by device') + if 'hds-thresh-max' not in rings: + raise KsftSkipEx('hds-thresh-max not defined by device') + + if rings['hds-thresh-max'] < 2: + raise KsftSkipEx('hds-thresh-max is too small') + elif rings['hds-thresh-max'] == 2: + hds_thresh = 1 + else: + while True: + hds_thresh = random.randint(1, rings['hds-thresh-max'] - 1) + if hds_thresh != rings['hds-thresh']: + break + + try: + netnl.rings_set({'header': {'dev-index': cfg.ifindex}, 'hds-thresh': hds_thresh}) + except NlError as e: + if e.error == errno.EINVAL: + raise KsftSkipEx("hds-thresh-set not supported by the device") + elif e.error == errno.EOPNOTSUPP: + raise KsftSkipEx("ring-set not supported by the device") + rings = netnl.rings_get({'header': {'dev-index': cfg.ifindex}}) + ksft_eq(hds_thresh, rings['hds-thresh']) + +def set_hds_thresh_max(cfg, netnl) -> None: + try: + rings = netnl.rings_get({'header': {'dev-index': cfg.ifindex}}) + except NlError as e: + raise KsftSkipEx('ring-get not supported by device') + if 'hds-thresh' not in rings: + raise KsftSkipEx('hds-thresh not supported by device') + try: + netnl.rings_set({'header': {'dev-index': cfg.ifindex}, 'hds-thresh': rings['hds-thresh-max']}) + except NlError as e: + if e.error == errno.EINVAL: + raise KsftSkipEx("hds-thresh-set not supported by the device") + elif e.error == errno.EOPNOTSUPP: + raise KsftSkipEx("ring-set not supported by the device") + rings = netnl.rings_get({'header': {'dev-index': cfg.ifindex}}) + ksft_eq(rings['hds-thresh'], rings['hds-thresh-max']) + +def set_hds_thresh_gt(cfg, netnl) -> None: + try: + rings = netnl.rings_get({'header': {'dev-index': cfg.ifindex}}) + except NlError as e: + raise KsftSkipEx('ring-get not supported by device') + if 'hds-thresh' not in rings: + raise KsftSkipEx('hds-thresh not supported by device') + if 'hds-thresh-max' not in rings: + raise KsftSkipEx('hds-thresh-max not defined by device') + hds_gt = rings['hds-thresh-max'] + 1 + with ksft_raises(NlError) as e: + netnl.rings_set({'header': {'dev-index': cfg.ifindex}, 'hds-thresh': hds_gt}) + ksft_eq(e.exception.nl_msg.error, -errno.EINVAL) + + +def set_xdp(cfg, netnl) -> None: + """ + Enable single-buffer XDP on the device. + When HDS is in "auto" / UNKNOWN mode, XDP installation should work. + """ + mode = _get_hds_mode(cfg, netnl) + if mode == 'enabled': + netnl.rings_set({'header': {'dev-index': cfg.ifindex}, + 'tcp-data-split': 'unknown'}) + + _xdp_onoff(cfg) + + +def enabled_set_xdp(cfg, netnl) -> None: + """ + Enable single-buffer XDP on the device. + When HDS is in "enabled" mode, XDP installation should not work. + """ + _get_hds_mode(cfg, netnl) + netnl.rings_set({'header': {'dev-index': cfg.ifindex}, + 'tcp-data-split': 'enabled'}) + + defer(netnl.rings_set, {'header': {'dev-index': cfg.ifindex}, + 'tcp-data-split': 'unknown'}) + + with ksft_raises(CmdExitFailure) as e: + _xdp_onoff(cfg) + + +def set_xdp(cfg, netnl) -> None: + """ + Enable single-buffer XDP on the device. + When HDS is in "auto" / UNKNOWN mode, XDP installation should work. + """ + mode = _get_hds_mode(cfg, netnl) + if mode == 'enabled': + netnl.rings_set({'header': {'dev-index': cfg.ifindex}, + 'tcp-data-split': 'unknown'}) + + _xdp_onoff(cfg) + + +def enabled_set_xdp(cfg, netnl) -> None: + """ + Enable single-buffer XDP on the device. + When HDS is in "enabled" mode, XDP installation should not work. + """ + _get_hds_mode(cfg, netnl) # Trigger skip if not supported + + netnl.rings_set({'header': {'dev-index': cfg.ifindex}, + 'tcp-data-split': 'enabled'}) + defer(netnl.rings_set, {'header': {'dev-index': cfg.ifindex}, + 'tcp-data-split': 'unknown'}) + + with ksft_raises(CmdExitFailure) as e: + _xdp_onoff(cfg) + + +def ioctl(cfg, netnl) -> None: + mode1 = _get_hds_mode(cfg, netnl) + _ioctl_ringparam_modify(cfg, netnl) + mode2 = _get_hds_mode(cfg, netnl) + + ksft_eq(mode1, mode2) + + +def ioctl_set_xdp(cfg, netnl) -> None: + """ + Like set_xdp(), but we perturb the settings via the legacy ioctl. + """ + mode = _get_hds_mode(cfg, netnl) + if mode == 'enabled': + netnl.rings_set({'header': {'dev-index': cfg.ifindex}, + 'tcp-data-split': 'unknown'}) + + _ioctl_ringparam_modify(cfg, netnl) + + _xdp_onoff(cfg) + + +def ioctl_enabled_set_xdp(cfg, netnl) -> None: + """ + Enable single-buffer XDP on the device. + When HDS is in "enabled" mode, XDP installation should not work. + """ + _get_hds_mode(cfg, netnl) # Trigger skip if not supported + + netnl.rings_set({'header': {'dev-index': cfg.ifindex}, + 'tcp-data-split': 'enabled'}) + defer(netnl.rings_set, {'header': {'dev-index': cfg.ifindex}, + 'tcp-data-split': 'unknown'}) + + with ksft_raises(CmdExitFailure) as e: + _xdp_onoff(cfg) + + +def main() -> None: + with NetDrvEnv(__file__, queue_count=3) as cfg: + ksft_run([get_hds, + get_hds_thresh, + set_hds_disable, + set_hds_enable, + set_hds_thresh_random, + set_hds_thresh_zero, + set_hds_thresh_max, + set_hds_thresh_gt, + set_xdp, + enabled_set_xdp, + ioctl, + ioctl_set_xdp, + ioctl_enabled_set_xdp], + args=(cfg, EthtoolFamily())) + ksft_exit() + +if __name__ == "__main__": + main() diff --git a/tools/testing/selftests/drivers/net/hw/.gitignore b/tools/testing/selftests/drivers/net/hw/.gitignore new file mode 100644 index 000000000000..6942bf575497 --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/.gitignore @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0-only +iou-zcrx +ncdevmem diff --git a/tools/testing/selftests/drivers/net/hw/Makefile b/tools/testing/selftests/drivers/net/hw/Makefile new file mode 100644 index 000000000000..df2c047ffa90 --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/Makefile @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: GPL-2.0+ OR MIT + +TEST_GEN_FILES = iou-zcrx + +TEST_PROGS = \ + csum.py \ + devlink_port_split.py \ + devmem.py \ + ethtool.sh \ + ethtool_extended_state.sh \ + ethtool_mm.sh \ + ethtool_rmon.sh \ + hw_stats_l3.sh \ + hw_stats_l3_gre.sh \ + iou-zcrx.py \ + irq.py \ + loopback.sh \ + pp_alloc_fail.py \ + rss_ctx.py \ + rss_input_xfrm.py \ + tso.py \ + xsk_reconfig.py \ + # + +TEST_FILES := \ + ethtool_lib.sh \ + # + +TEST_INCLUDES := \ + $(wildcard lib/py/*.py ../lib/py/*.py) \ + ../../../net/lib.sh \ + ../../../net/forwarding/lib.sh \ + ../../../net/forwarding/ipip_lib.sh \ + ../../../net/forwarding/tc_common.sh \ + # + +# YNL files, must be before "include ..lib.mk" +YNL_GEN_FILES := ncdevmem +TEST_GEN_FILES += $(YNL_GEN_FILES) +TEST_GEN_FILES += $(patsubst %.c,%.o,$(wildcard *.bpf.c)) + +include ../../../lib.mk + +# YNL build +YNL_GENS := ethtool netdev +include ../../../net/ynl.mk + +include ../../../net/bpf.mk + +$(OUTPUT)/iou-zcrx: LDLIBS += -luring diff --git a/tools/testing/selftests/drivers/net/hw/csum.py b/tools/testing/selftests/drivers/net/hw/csum.py new file mode 100755 index 000000000000..cd23af875317 --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/csum.py @@ -0,0 +1,110 @@ +#!/usr/bin/env python3 +# SPDX-License-Identifier: GPL-2.0 + +"""Run the tools/testing/selftests/net/csum testsuite.""" + +from os import path + +from lib.py import ksft_run, ksft_exit, KsftSkipEx +from lib.py import EthtoolFamily, NetDrvEpEnv +from lib.py import bkg, cmd, wait_port_listen + +def test_receive(cfg, ipver="6", extra_args=None): + """Test local nic checksum receive. Remote host sends crafted packets.""" + if not cfg.have_rx_csum: + raise KsftSkipEx(f"Test requires rx checksum offload on {cfg.ifname}") + + ip_args = f"-{ipver} -S {cfg.remote_addr_v[ipver]} -D {cfg.addr_v[ipver]}" + + rx_cmd = f"{cfg.bin_local} -i {cfg.ifname} -n 100 {ip_args} -r 1 -R {extra_args}" + tx_cmd = f"{cfg.bin_remote} -i {cfg.ifname} -n 100 {ip_args} -r 1 -T {extra_args}" + + with bkg(rx_cmd, exit_wait=True): + wait_port_listen(34000, proto="udp") + cmd(tx_cmd, host=cfg.remote) + + +def test_transmit(cfg, ipver="6", extra_args=None): + """Test local nic checksum transmit. Remote host verifies packets.""" + if (not cfg.have_tx_csum_generic and + not (cfg.have_tx_csum_ipv4 and ipver == "4") and + not (cfg.have_tx_csum_ipv6 and ipver == "6")): + raise KsftSkipEx(f"Test requires tx checksum offload on {cfg.ifname}") + + ip_args = f"-{ipver} -S {cfg.addr_v[ipver]} -D {cfg.remote_addr_v[ipver]}" + + # Cannot randomize input when calculating zero checksum + if extra_args != "-U -Z": + extra_args += " -r 1" + + rx_cmd = f"{cfg.bin_remote} -i {cfg.ifname} -L 1 -n 100 {ip_args} -R {extra_args}" + tx_cmd = f"{cfg.bin_local} -i {cfg.ifname} -L 1 -n 100 {ip_args} -T {extra_args}" + + with bkg(rx_cmd, host=cfg.remote, exit_wait=True): + wait_port_listen(34000, proto="udp", host=cfg.remote) + cmd(tx_cmd) + + +def test_builder(name, cfg, ipver="6", tx=False, extra_args=""): + """Construct specific tests from the common template. + + Most tests follow the same basic pattern, differing only in + Direction of the test and optional flags passed to csum.""" + def f(cfg): + cfg.require_ipver(ipver) + + if tx: + test_transmit(cfg, ipver, extra_args) + else: + test_receive(cfg, ipver, extra_args) + + f.__name__ = f"ipv{ipver}_" + name + return f + + +def check_nic_features(cfg) -> None: + """Test whether Tx and Rx checksum offload are enabled. + + If the device under test has either off, then skip the relevant tests.""" + cfg.have_tx_csum_generic = False + cfg.have_tx_csum_ipv4 = False + cfg.have_tx_csum_ipv6 = False + cfg.have_rx_csum = False + + ethnl = EthtoolFamily() + features = ethnl.features_get({"header": {"dev-index": cfg.ifindex}}) + for f in features["active"]["bits"]["bit"]: + if f["name"] == "tx-checksum-ip-generic": + cfg.have_tx_csum_generic = True + elif f["name"] == "tx-checksum-ipv4": + cfg.have_tx_csum_ipv4 = True + elif f["name"] == "tx-checksum-ipv6": + cfg.have_tx_csum_ipv6 = True + elif f["name"] == "rx-checksum": + cfg.have_rx_csum = True + + +def main() -> None: + with NetDrvEpEnv(__file__, nsim_test=False) as cfg: + check_nic_features(cfg) + + cfg.bin_local = cfg.net_lib_dir / "csum" + cfg.bin_remote = cfg.remote.deploy(cfg.bin_local) + + cases = [] + for ipver in ["4", "6"]: + cases.append(test_builder("rx_tcp", cfg, ipver, False, "-t")) + cases.append(test_builder("rx_tcp_invalid", cfg, ipver, False, "-t -E")) + + cases.append(test_builder("rx_udp", cfg, ipver, False, "")) + cases.append(test_builder("rx_udp_invalid", cfg, ipver, False, "-E")) + + cases.append(test_builder("tx_udp_csum_offload", cfg, ipver, True, "-U")) + cases.append(test_builder("tx_udp_zero_checksum", cfg, ipver, True, "-U -Z")) + + ksft_run(cases=cases, args=(cfg, )) + ksft_exit() + + +if __name__ == "__main__": + main() diff --git a/tools/testing/selftests/drivers/net/hw/devlink_port_split.py b/tools/testing/selftests/drivers/net/hw/devlink_port_split.py new file mode 100755 index 000000000000..2d84c7a0be6b --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/devlink_port_split.py @@ -0,0 +1,309 @@ +#!/usr/bin/env python3 +# SPDX-License-Identifier: GPL-2.0 + +from subprocess import PIPE, Popen +import json +import time +import argparse +import collections +import sys + +# +# Test port split configuration using devlink-port lanes attribute. +# The test is skipped in case the attribute is not available. +# +# First, check that all the ports with 1 lane fail to split. +# Second, check that all the ports with more than 1 lane can be split +# to all valid configurations (e.g., split to 2, split to 4 etc.) +# + + +# Kselftest framework requirement - SKIP code is 4 +KSFT_SKIP=4 +Port = collections.namedtuple('Port', 'bus_info name') + + +def run_command(cmd, should_fail=False): + """ + Run a command in subprocess. + Return: Tuple of (stdout, stderr). + """ + + p = Popen(cmd, stdout=PIPE, stderr=PIPE, shell=True) + stdout, stderr = p.communicate() + stdout, stderr = stdout.decode(), stderr.decode() + + if stderr != "" and not should_fail: + print("Error sending command: %s" % cmd) + print(stdout) + print(stderr) + return stdout, stderr + + +class devlink_ports(object): + """ + Class that holds information on the devlink ports, required to the tests; + if_names: A list of interfaces in the devlink ports. + """ + + def get_if_names(dev): + """ + Get a list of physical devlink ports. + Return: Array of tuples (bus_info/port, if_name). + """ + + arr = [] + + cmd = "devlink -j port show" + stdout, stderr = run_command(cmd) + assert stderr == "" + ports = json.loads(stdout)['port'] + + validate_devlink_output(ports, 'flavour') + + for port in ports: + if dev in port: + if ports[port]['flavour'] == 'physical': + arr.append(Port(bus_info=port, name=ports[port]['netdev'])) + + return arr + + def __init__(self, dev): + self.if_names = devlink_ports.get_if_names(dev) + + +def get_max_lanes(port): + """ + Get the $port's maximum number of lanes. + Return: number of lanes, e.g. 1, 2, 4 and 8. + """ + + cmd = "devlink -j port show %s" % port + stdout, stderr = run_command(cmd) + assert stderr == "" + values = list(json.loads(stdout)['port'].values())[0] + + if 'lanes' in values: + lanes = values['lanes'] + else: + lanes = 0 + return lanes + + +def get_split_ability(port): + """ + Get the $port split ability. + Return: split ability, true or false. + """ + + cmd = "devlink -j port show %s" % port.name + stdout, stderr = run_command(cmd) + assert stderr == "" + values = list(json.loads(stdout)['port'].values())[0] + + return values['splittable'] + + +def split(k, port, should_fail=False): + """ + Split $port into $k ports. + If should_fail == True, the split should fail. Otherwise, should pass. + Return: Array of sub ports after splitting. + If the $port wasn't split, the array will be empty. + """ + + cmd = "devlink port split %s count %s" % (port.bus_info, k) + stdout, stderr = run_command(cmd, should_fail=should_fail) + + if should_fail: + if not test(stderr != "", "%s is unsplittable" % port.name): + print("split an unsplittable port %s" % port.name) + return create_split_group(port, k) + else: + if stderr == "": + return create_split_group(port, k) + print("didn't split a splittable port %s" % port.name) + + return [] + + +def unsplit(port): + """ + Unsplit $port. + """ + + cmd = "devlink port unsplit %s" % port + stdout, stderr = run_command(cmd) + test(stderr == "", "Unsplit port %s" % port) + + +def exists(port, dev): + """ + Check if $port exists in the devlink ports. + Return: True is so, False otherwise. + """ + + return any(dev_port.name == port + for dev_port in devlink_ports.get_if_names(dev)) + + +def exists_and_lanes(ports, lanes, dev): + """ + Check if every port in the list $ports exists in the devlink ports and has + $lanes number of lanes after splitting. + Return: True if both are True, False otherwise. + """ + + for port in ports: + max_lanes = get_max_lanes(port) + if not exists(port, dev): + print("port %s doesn't exist in devlink ports" % port) + return False + if max_lanes != lanes: + print("port %s has %d lanes, but %s were expected" + % (port, lanes, max_lanes)) + return False + return True + + +def test(cond, msg): + """ + Check $cond and print a message accordingly. + Return: True is pass, False otherwise. + """ + + if cond: + print("TEST: %-60s [ OK ]" % msg) + else: + print("TEST: %-60s [FAIL]" % msg) + + return cond + + +def create_split_group(port, k): + """ + Create the split group for $port. + Return: Array with $k elements, which are the split port group. + """ + + return list(port.name + "s" + str(i) for i in range(k)) + + +def split_unsplittable_port(port, k): + """ + Test that splitting of unsplittable port fails. + """ + + # split to max + new_split_group = split(k, port, should_fail=True) + + if new_split_group != []: + unsplit(port.bus_info) + + +def split_splittable_port(port, k, lanes, dev): + """ + Test that splitting of splittable port passes correctly. + """ + + new_split_group = split(k, port) + + # Once the split command ends, it takes some time to the sub ifaces' + # to get their names. Use udevadm to continue only when all current udev + # events are handled. + cmd = "udevadm settle" + stdout, stderr = run_command(cmd) + assert stderr == "" + + if new_split_group != []: + test(exists_and_lanes(new_split_group, lanes/k, dev), + "split port %s into %s" % (port.name, k)) + + unsplit(port.bus_info) + + +def validate_devlink_output(devlink_data, target_property=None): + """ + Determine if test should be skipped by checking: + 1. devlink_data contains values + 2. The target_property exist in devlink_data + """ + skip_reason = None + if any(devlink_data.values()): + if target_property: + skip_reason = "{} not found in devlink output, test skipped".format(target_property) + for key in devlink_data: + if target_property in devlink_data[key]: + skip_reason = None + else: + skip_reason = 'devlink output is empty, test skipped' + + if skip_reason: + print(skip_reason) + sys.exit(KSFT_SKIP) + + +def make_parser(): + parser = argparse.ArgumentParser(description='A test for port splitting.') + parser.add_argument('--dev', + help='The devlink handle of the device under test. ' + + 'The default is the first registered devlink ' + + 'handle.') + + return parser + + +def main(cmdline=None): + parser = make_parser() + args = parser.parse_args(cmdline) + + dev = args.dev + if not dev: + cmd = "devlink -j dev show" + stdout, stderr = run_command(cmd) + assert stderr == "" + + validate_devlink_output(json.loads(stdout)) + devs = json.loads(stdout)['dev'] + dev = list(devs.keys())[0] + + cmd = "devlink dev show %s" % dev + stdout, stderr = run_command(cmd) + if stderr != "": + print("devlink device %s can not be found" % dev) + sys.exit(1) + + ports = devlink_ports(dev) + + found_max_lanes = False + for port in ports.if_names: + max_lanes = get_max_lanes(port.name) + + # If max lanes is 0, do not test port splitting at all + if max_lanes == 0: + continue + + # If 1 lane, shouldn't be able to split + elif max_lanes == 1: + test(not get_split_ability(port), + "%s should not be able to split" % port.name) + split_unsplittable_port(port, max_lanes) + + # Else, splitting should pass and all the split ports should exist. + else: + lane = max_lanes + test(get_split_ability(port), + "%s should be able to split" % port.name) + while lane > 1: + split_splittable_port(port, lane, max_lanes, dev) + + lane //= 2 + found_max_lanes = True + + if not found_max_lanes: + print(f"Test not started, no port of device {dev} reports max_lanes") + sys.exit(KSFT_SKIP) + + +if __name__ == "__main__": + main() diff --git a/tools/testing/selftests/drivers/net/hw/devmem.py b/tools/testing/selftests/drivers/net/hw/devmem.py new file mode 100755 index 000000000000..7947650210a0 --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/devmem.py @@ -0,0 +1,78 @@ +#!/usr/bin/env python3 +# SPDX-License-Identifier: GPL-2.0 + +from os import path +from lib.py import ksft_run, ksft_exit +from lib.py import ksft_eq, KsftSkipEx +from lib.py import NetDrvEpEnv +from lib.py import bkg, cmd, rand_port, wait_port_listen +from lib.py import ksft_disruptive + + +def require_devmem(cfg): + if not hasattr(cfg, "_devmem_probed"): + probe_command = f"{cfg.bin_local} -f {cfg.ifname}" + cfg._devmem_supported = cmd(probe_command, fail=False, shell=True).ret == 0 + cfg._devmem_probed = True + + if not cfg._devmem_supported: + raise KsftSkipEx("Test requires devmem support") + + +@ksft_disruptive +def check_rx(cfg) -> None: + require_devmem(cfg) + + port = rand_port() + socat = f"socat -u - TCP{cfg.addr_ipver}:{cfg.addr}:{port},bind={cfg.remote_addr}:{port}" + listen_cmd = f"{cfg.bin_local} -l -f {cfg.ifname} -s {cfg.addr} -p {port} -c {cfg.remote_addr} -v 7" + + with bkg(listen_cmd, exit_wait=True) as ncdevmem: + wait_port_listen(port) + cmd(f"yes $(echo -e \x01\x02\x03\x04\x05\x06) | \ + head -c 1K | {socat}", host=cfg.remote, shell=True) + + ksft_eq(ncdevmem.ret, 0) + + +@ksft_disruptive +def check_tx(cfg) -> None: + require_devmem(cfg) + + port = rand_port() + listen_cmd = f"socat -U - TCP{cfg.addr_ipver}-LISTEN:{port}" + + with bkg(listen_cmd) as socat: + wait_port_listen(port) + cmd(f"echo -e \"hello\\nworld\"| {cfg.bin_remote} -f {cfg.ifname} -s {cfg.addr} -p {port}", host=cfg.remote, shell=True) + + ksft_eq(socat.stdout.strip(), "hello\nworld") + + +@ksft_disruptive +def check_tx_chunks(cfg) -> None: + cfg.require_ipver("6") + require_devmem(cfg) + + port = rand_port() + listen_cmd = f"socat -U - TCP6-LISTEN:{port}" + + with bkg(listen_cmd, exit_wait=True) as socat: + wait_port_listen(port) + cmd(f"echo -e \"hello\\nworld\"| {cfg.bin_remote} -f {cfg.ifname} -s {cfg.addr_v['6']} -p {port} -z 3", host=cfg.remote, shell=True) + + ksft_eq(socat.stdout.strip(), "hello\nworld") + + +def main() -> None: + with NetDrvEpEnv(__file__) as cfg: + cfg.bin_local = path.abspath(path.dirname(__file__) + "/ncdevmem") + cfg.bin_remote = cfg.remote.deploy(cfg.bin_local) + + ksft_run([check_rx, check_tx, check_tx_chunks], + args=(cfg, )) + ksft_exit() + + +if __name__ == "__main__": + main() diff --git a/tools/testing/selftests/drivers/net/hw/ethtool.sh b/tools/testing/selftests/drivers/net/hw/ethtool.sh new file mode 100755 index 000000000000..fa6953de6b6d --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/ethtool.sh @@ -0,0 +1,297 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +ALL_TESTS=" + same_speeds_autoneg_off + different_speeds_autoneg_off + combination_of_neg_on_and_off + advertise_subset_of_speeds + check_highest_speed_is_chosen + different_speeds_autoneg_on +" +NUM_NETIFS=2 +lib_dir=$(dirname "$0") +source "$lib_dir"/../../../net/forwarding/lib.sh +source ethtool_lib.sh + +h1_create() +{ + simple_if_init $h1 192.0.2.1/24 +} + +h1_destroy() +{ + simple_if_fini $h1 192.0.2.1/24 +} + +h2_create() +{ + simple_if_init $h2 192.0.2.2/24 +} + +h2_destroy() +{ + simple_if_fini $h2 192.0.2.2/24 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + h2=${NETIFS[p2]} + + h1_create + h2_create +} + +cleanup() +{ + pre_cleanup + + h2_destroy + h1_destroy +} + +same_speeds_autoneg_off() +{ + # Check that when each of the reported speeds is forced, the links come + # up and are operational. + local -a speeds_arr=($(common_speeds_get $h1 $h2 0 0)) + + for speed in "${speeds_arr[@]}"; do + RET=0 + ethtool_set $h1 speed $speed autoneg off + ethtool_set $h2 speed $speed autoneg off + + setup_wait_dev_with_timeout $h1 + setup_wait_dev_with_timeout $h2 + ping_do $h1 192.0.2.2 + check_err $? "ping with speed $speed autoneg off" + log_test "force speed $speed on both ends" + done + + ethtool -s $h2 autoneg on + ethtool -s $h1 autoneg on +} + +different_speeds_autoneg_off() +{ + # Test that when we force different speeds, links are not up and ping + # fails. + RET=0 + + local -a speeds_arr=($(different_speeds_get $h1 $h2 0 0)) + local speed1=${speeds_arr[0]} + local speed2=${speeds_arr[1]} + + ethtool_set $h1 speed $speed1 autoneg off + ethtool_set $h2 speed $speed2 autoneg off + + setup_wait_dev_with_timeout $h1 + setup_wait_dev_with_timeout $h2 + ping_do $h1 192.0.2.2 + check_fail $? "ping with different speeds" + + log_test "force of different speeds autoneg off" + + ethtool -s $h2 autoneg on + ethtool -s $h1 autoneg on +} + +combination_of_neg_on_and_off() +{ + # Test that when one device is forced to a speed supported by both + # endpoints and the other device is configured to autoneg on, the links + # are up and ping passes. + local -a speeds_arr=($(common_speeds_get $h1 $h2 0 1)) + + for speed in "${speeds_arr[@]}"; do + RET=0 + ethtool_set $h1 speed $speed autoneg off + + setup_wait_dev_with_timeout $h1 + setup_wait_dev_with_timeout $h2 + ping_do $h1 192.0.2.2 + check_err $? "ping with h1-speed=$speed autoneg off, h2 autoneg on" + log_test "force speed $speed vs. autoneg" + done + + ethtool -s $h1 autoneg on +} + +hex_speed_value_get() +{ + local speed=$1; shift + + local shift_size=${speed_values[$speed]} + speed=$((0x1 << $"shift_size")) + printf "%#x" "$speed" +} + +subset_of_common_speeds_get() +{ + local dev1=$1; shift + local dev2=$1; shift + local adver=$1; shift + + local -a speeds_arr=($(common_speeds_get $dev1 $dev2 0 $adver)) + local speed_to_advertise=0 + local speed_to_remove=${speeds_arr[0]} + speed_to_remove+='base' + + local -a speeds_mode_arr=($(common_speeds_get $dev1 $dev2 1 $adver)) + + for speed in ${speeds_mode_arr[@]}; do + if [[ $speed != $speed_to_remove* ]]; then + speed=$(hex_speed_value_get $speed) + speed_to_advertise=$(($speed_to_advertise | \ + $speed)) + fi + + done + + # Convert to hex. + printf "%#x" "$speed_to_advertise" +} + +speed_to_advertise_get() +{ + # The function returns the hex number that is composed by OR-ing all + # the modes corresponding to the provided speed. + local speed_without_mode=$1; shift + local supported_speeds=("$@"); shift + local speed_to_advertise=0 + + speed_without_mode+='base' + + for speed in ${supported_speeds[@]}; do + if [[ $speed == $speed_without_mode* ]]; then + speed=$(hex_speed_value_get $speed) + speed_to_advertise=$(($speed_to_advertise | \ + $speed)) + fi + + done + + # Convert to hex. + printf "%#x" "$speed_to_advertise" +} + +advertise_subset_of_speeds() +{ + # Test that when one device advertises a subset of speeds and another + # advertises a specific speed (but all modes of this speed), the links + # are up and ping passes. + RET=0 + + local speed_1_to_advertise=$(subset_of_common_speeds_get $h1 $h2 1) + ethtool_set $h1 advertise $speed_1_to_advertise + + if [ $RET != 0 ]; then + log_test "advertise subset of speeds" + return + fi + + local -a speeds_arr_without_mode=($(common_speeds_get $h1 $h2 0 1)) + # Check only speeds that h1 advertised. Remove the first speed. + unset speeds_arr_without_mode[0] + local -a speeds_arr_with_mode=($(common_speeds_get $h1 $h2 1 1)) + + for speed_value in ${speeds_arr_without_mode[@]}; do + RET=0 + local speed_2_to_advertise=$(speed_to_advertise_get $speed_value \ + "${speeds_arr_with_mode[@]}") + ethtool_set $h2 advertise $speed_2_to_advertise + + setup_wait_dev_with_timeout $h1 + setup_wait_dev_with_timeout $h2 + ping_do $h1 192.0.2.2 + check_err $? "ping with h1=$speed_1_to_advertise, h2=$speed_2_to_advertise ($speed_value)" + + log_test "advertise $speed_1_to_advertise vs. $speed_2_to_advertise" + done + + ethtool -s $h2 autoneg on + ethtool -s $h1 autoneg on +} + +check_highest_speed_is_chosen() +{ + # Test that when one device advertises a subset of speeds, the other + # chooses the highest speed. This test checks configuration without + # traffic. + RET=0 + + local max_speed + local chosen_speed + local speed_to_advertise=$(subset_of_common_speeds_get $h1 $h2 1) + + ethtool_set $h1 advertise $speed_to_advertise + + if [ $RET != 0 ]; then + log_test "check highest speed" + return + fi + + local -a speeds_arr=($(common_speeds_get $h1 $h2 0 1)) + + max_speed=${speeds_arr[0]} + for current in ${speeds_arr[@]}; do + if [[ $current -gt $max_speed ]]; then + max_speed=$current + fi + done + + setup_wait_dev_with_timeout $h1 + setup_wait_dev_with_timeout $h2 + chosen_speed=$(ethtool $h1 | grep 'Speed:') + chosen_speed=${chosen_speed%"Mb/s"*} + chosen_speed=${chosen_speed#*"Speed: "} + ((chosen_speed == max_speed)) + check_err $? "h1 advertise $speed_to_advertise, h2 sync to speed $chosen_speed" + + log_test "check highest speed" + + ethtool -s $h2 autoneg on + ethtool -s $h1 autoneg on +} + +different_speeds_autoneg_on() +{ + # Test that when we configure links to advertise different speeds, + # links are not up and ping fails. + RET=0 + + local -a speeds=($(different_speeds_get $h1 $h2 1 1)) + local speed1=${speeds[0]} + local speed2=${speeds[1]} + + speed1=$(hex_speed_value_get $speed1) + speed2=$(hex_speed_value_get $speed2) + + ethtool_set $h1 advertise $speed1 + ethtool_set $h2 advertise $speed2 + + if (($RET)); then + setup_wait_dev_with_timeout $h1 + setup_wait_dev_with_timeout $h2 + ping_do $h1 192.0.2.2 + check_fail $? "ping with different speeds autoneg on" + fi + + log_test "advertise different speeds autoneg on" + + ethtool -s $h2 autoneg on + ethtool -s $h1 autoneg on +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +declare -gA speed_values +eval "speed_values=($(speeds_arr_get))" + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/hw/ethtool_extended_state.sh b/tools/testing/selftests/drivers/net/hw/ethtool_extended_state.sh new file mode 100755 index 000000000000..a7584448416e --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/ethtool_extended_state.sh @@ -0,0 +1,116 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +ALL_TESTS=" + autoneg + autoneg_force_mode + no_cable +" + +NUM_NETIFS=2 +lib_dir=$(dirname "$0") +source "$lib_dir"/../../../net/forwarding/lib.sh +source ethtool_lib.sh + +TIMEOUT=$((WAIT_TIMEOUT * 1000)) # ms + +setup_prepare() +{ + swp1=${NETIFS[p1]} + swp2=${NETIFS[p2]} + swp3=$NETIF_NO_CABLE +} + +ethtool_ext_state() +{ + local dev=$1; shift + local expected_ext_state=$1; shift + local expected_ext_substate=${1:-""}; shift + + local ext_state=$(ethtool $dev | grep "Link detected" \ + | cut -d "(" -f2 | cut -d ")" -f1) + local ext_substate=$(echo $ext_state | cut -sd "," -f2 \ + | sed -e 's/^[[:space:]]*//') + ext_state=$(echo $ext_state | cut -d "," -f1) + + if [[ $ext_state != $expected_ext_state ]]; then + echo "Expected \"$expected_ext_state\", got \"$ext_state\"" + return 1 + fi + if [[ $ext_substate != $expected_ext_substate ]]; then + echo "Expected \"$expected_ext_substate\", got \"$ext_substate\"" + return 1 + fi +} + +autoneg() +{ + local msg + + RET=0 + + ip link set dev $swp1 up + + msg=$(busywait $TIMEOUT ethtool_ext_state $swp1 \ + "Autoneg" "No partner detected") + check_err $? "$msg" + + log_test "Autoneg, No partner detected" + + ip link set dev $swp1 down +} + +autoneg_force_mode() +{ + local msg + + RET=0 + + ip link set dev $swp1 up + ip link set dev $swp2 up + + local -a speeds_arr=($(different_speeds_get $swp1 $swp2 0 0)) + local speed1=${speeds_arr[0]} + local speed2=${speeds_arr[1]} + + ethtool_set $swp1 speed $speed1 autoneg off + ethtool_set $swp2 speed $speed2 autoneg off + + msg=$(busywait $TIMEOUT ethtool_ext_state $swp1 \ + "Autoneg" "No partner detected during force mode") + check_err $? "$msg" + + msg=$(busywait $TIMEOUT ethtool_ext_state $swp2 \ + "Autoneg" "No partner detected during force mode") + check_err $? "$msg" + + log_test "Autoneg, No partner detected during force mode" + + ethtool -s $swp2 autoneg on + ethtool -s $swp1 autoneg on + + ip link set dev $swp2 down + ip link set dev $swp1 down +} + +no_cable() +{ + local msg + + RET=0 + + ip link set dev $swp3 up + + msg=$(busywait $TIMEOUT ethtool_ext_state $swp3 "No cable") + check_err $? "$msg" + + log_test "No cable" + + ip link set dev $swp3 down +} + +setup_prepare + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/hw/ethtool_lib.sh b/tools/testing/selftests/drivers/net/hw/ethtool_lib.sh new file mode 100644 index 000000000000..b9bfb45085af --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/ethtool_lib.sh @@ -0,0 +1,120 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +speeds_arr_get() +{ + cmd='/ETHTOOL_LINK_MODE_[^[:space:]]*_BIT[[:space:]]+=[[:space:]]+/ \ + {sub(/,$/, "") \ + sub(/ETHTOOL_LINK_MODE_/,"") \ + sub(/_BIT/,"") \ + sub(/_Full/,"/Full") \ + sub(/_Half/,"/Half");\ + print "["$1"]="$3}' + + awk "${cmd}" /usr/include/linux/ethtool.h +} + +ethtool_set() +{ + local cmd="$@" + local out=$(ethtool -s $cmd 2>&1 | wc -l) + + check_err $out "error in configuration. $cmd" +} + +dev_linkmodes_params_get() +{ + local dev=$1; shift + local adver=$1; shift + local -a linkmodes_params + local param_count + local arr + + if (($adver)); then + mode="Advertised link modes" + else + mode="Supported link modes" + fi + + local -a dev_linkmodes=($(dev_speeds_get $dev 1 $adver)) + for ((i=0; i<${#dev_linkmodes[@]}; i++)); do + linkmodes_params[$i]=$(echo -e "${dev_linkmodes[$i]}" | \ + # Replaces all non numbers with spaces + sed -e 's/[^0-9]/ /g' | \ + # Squeeze spaces in sequence to 1 space + tr -s ' ') + # Count how many numbers were found in the linkmode + param_count=$(echo "${linkmodes_params[$i]}" | wc -w) + if [[ $param_count -eq 1 ]]; then + linkmodes_params[$i]="${linkmodes_params[$i]} 1" + elif [[ $param_count -ge 3 ]]; then + arr=(${linkmodes_params[$i]}) + # Take only first two params + linkmodes_params[$i]=$(echo "${arr[@]:0:2}") + fi + done + echo ${linkmodes_params[@]} +} + +dev_speeds_get() +{ + local dev=$1; shift + local with_mode=$1; shift + local adver=$1; shift + local speeds_str + + if (($adver)); then + mode="Advertised link modes" + else + mode="Supported link modes" + fi + + speeds_str=$(ethtool "$dev" | \ + # Snip everything before the link modes section. + sed -n '/'"$mode"':/,$p' | \ + # Quit processing the rest at the start of the next section. + # When checking, skip the header of this section (hence the 2,). + sed -n '2,${/^[\t][^ \t]/q};p' | \ + # Drop the section header of the current section. + cut -d':' -f2) + + local -a speeds_arr=($speeds_str) + if [[ $with_mode -eq 0 ]]; then + for ((i=0; i<${#speeds_arr[@]}; i++)); do + speeds_arr[$i]=${speeds_arr[$i]%base*} + done + fi + echo ${speeds_arr[@]} +} + +common_speeds_get() +{ + dev1=$1; shift + dev2=$1; shift + with_mode=$1; shift + adver=$1; shift + + local -a dev1_speeds=($(dev_speeds_get $dev1 $with_mode $adver)) + local -a dev2_speeds=($(dev_speeds_get $dev2 $with_mode $adver)) + + comm -12 \ + <(printf '%s\n' "${dev1_speeds[@]}" | sort -u) \ + <(printf '%s\n' "${dev2_speeds[@]}" | sort -u) +} + +different_speeds_get() +{ + local dev1=$1; shift + local dev2=$1; shift + local with_mode=$1; shift + local adver=$1; shift + + local -a speeds_arr + + speeds_arr=($(common_speeds_get $dev1 $dev2 $with_mode $adver)) + if [[ ${#speeds_arr[@]} < 2 ]]; then + check_err 1 "cannot check different speeds. There are not enough speeds" + fi + + echo ${speeds_arr[0]} ${speeds_arr[1]} +} diff --git a/tools/testing/selftests/drivers/net/hw/ethtool_mm.sh b/tools/testing/selftests/drivers/net/hw/ethtool_mm.sh new file mode 100755 index 000000000000..c301e735c8ab --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/ethtool_mm.sh @@ -0,0 +1,341 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +ALL_TESTS=" + manual_with_verification_h1_to_h2 + manual_with_verification_h2_to_h1 + manual_without_verification_h1_to_h2 + manual_without_verification_h2_to_h1 + manual_failed_verification_h1_to_h2 + manual_failed_verification_h2_to_h1 + lldp +" + +NUM_NETIFS=2 +REQUIRE_MZ=no +PREEMPTIBLE_PRIO=0 +lib_dir=$(dirname "$0") +source "$lib_dir"/../../../net/forwarding/lib.sh + +traffic_test() +{ + local if=$1; shift + local src=$1; shift + local num_pkts=10000 + local before= + local after= + local delta= + + if [ ${has_pmac_stats[$if]} = false ]; then + src="aggregate" + fi + + before=$(ethtool_std_stats_get $if "eth-mac" "FramesTransmittedOK" $src) + + $MZ $if -q -c $num_pkts -p 64 -b bcast -t ip -R $PREEMPTIBLE_PRIO + + after=$(ethtool_std_stats_get $if "eth-mac" "FramesTransmittedOK" $src) + + delta=$((after - before)) + + # Allow an extra 1% tolerance for random packets sent by the stack + [ $delta -ge $num_pkts ] && [ $delta -le $((num_pkts + 100)) ] +} + +manual_with_verification() +{ + local tx=$1; shift + local rx=$1; shift + + RET=0 + + # It isn't completely clear from IEEE 802.3-2018 Figure 99-5: Transmit + # Processing state diagram whether the "send_r" variable (send response + # to verification frame) should be taken into consideration while the + # MAC Merge TX direction is disabled. That being said, at least the + # NXP ENETC does not, and requires tx-enabled on in order to respond to + # the link partner's verification frames. + ethtool --set-mm $rx tx-enabled on + ethtool --set-mm $tx verify-enabled on tx-enabled on + + # Wait for verification to finish + sleep 1 + + ethtool --json --show-mm $tx | jq -r '.[]."verify-status"' | \ + grep -q 'SUCCEEDED' + check_err "$?" "Verification did not succeed" + + ethtool --json --show-mm $tx | jq -r '.[]."tx-active"' | grep -q 'true' + check_err "$?" "pMAC TX is not active" + + traffic_test $tx "pmac" + check_err "$?" "Traffic did not get sent through $tx's pMAC" + + ethtool --set-mm $tx verify-enabled off tx-enabled off + ethtool --set-mm $rx tx-enabled off + + log_test "Manual configuration with verification: $tx to $rx" +} + +manual_with_verification_h1_to_h2() +{ + manual_with_verification $h1 $h2 +} + +manual_with_verification_h2_to_h1() +{ + manual_with_verification $h2 $h1 +} + +manual_without_verification() +{ + local tx=$1; shift + local rx=$1; shift + + RET=0 + + ethtool --set-mm $tx verify-enabled off tx-enabled on + + ethtool --json --show-mm $tx | jq -r '.[]."verify-status"' | \ + grep -q 'DISABLED' + check_err "$?" "Verification is not disabled" + + ethtool --json --show-mm $tx | jq -r '.[]."tx-active"' | grep -q 'true' + check_err "$?" "pMAC TX is not active" + + traffic_test $tx "pmac" + check_err "$?" "Traffic did not get sent through $tx's pMAC" + + ethtool --set-mm $tx verify-enabled off tx-enabled off + + log_test "Manual configuration without verification: $tx to $rx" +} + +manual_without_verification_h1_to_h2() +{ + manual_without_verification $h1 $h2 +} + +manual_without_verification_h2_to_h1() +{ + manual_without_verification $h2 $h1 +} + +manual_failed_verification() +{ + local tx=$1; shift + local rx=$1; shift + + RET=0 + + ethtool --set-mm $rx pmac-enabled off + ethtool --set-mm $tx verify-enabled on tx-enabled on + + # Wait for verification to time out + sleep 1 + + ethtool --json --show-mm $tx | jq -r '.[]."verify-status"' | \ + grep -q 'SUCCEEDED' + check_fail "$?" "Verification succeeded when it shouldn't have" + + ethtool --json --show-mm $tx | jq -r '.[]."tx-active"' | grep -q 'true' + check_fail "$?" "pMAC TX is active when it shouldn't have" + + traffic_test $tx "emac" + check_err "$?" "Traffic did not get sent through $tx's eMAC" + + ethtool --set-mm $tx verify-enabled off tx-enabled off + ethtool --set-mm $rx pmac-enabled on + + log_test "Manual configuration with failed verification: $tx to $rx" +} + +manual_failed_verification_h1_to_h2() +{ + manual_failed_verification $h1 $h2 +} + +manual_failed_verification_h2_to_h1() +{ + manual_failed_verification $h2 $h1 +} + +smallest_supported_add_frag_size() +{ + local iface=$1 + local rx_min_frag_size= + + rx_min_frag_size=$(ethtool --json --show-mm $iface | \ + jq '.[]."rx-min-frag-size"') + + if [ $rx_min_frag_size -le 60 ]; then + echo 0 + elif [ $rx_min_frag_size -le 124 ]; then + echo 1 + elif [ $rx_min_frag_size -le 188 ]; then + echo 2 + elif [ $rx_min_frag_size -le 252 ]; then + echo 3 + else + echo "$iface: RX min frag size $rx_min_frag_size cannot be advertised over LLDP" + exit 1 + fi +} + +expected_add_frag_size() +{ + local iface=$1 + local requested=$2 + local min=$(smallest_supported_add_frag_size $iface) + + [ $requested -le $min ] && echo $min || echo $requested +} + +lldp_change_add_frag_size() +{ + local add_frag_size=$1 + local pattern= + + lldptool -T -i $h1 -V addEthCaps addFragSize=$add_frag_size >/dev/null + # Wait for TLVs to be received + sleep 2 + pattern=$(printf "Additional fragment size: %d" \ + $(expected_add_frag_size $h1 $add_frag_size)) + lldptool -i $h2 -t -n -V addEthCaps | grep -q "$pattern" +} + +lldp() +{ + RET=0 + + systemctl start lldpad + + # Configure the interfaces to receive and transmit LLDPDUs + lldptool -L -i $h1 adminStatus=rxtx >/dev/null + lldptool -L -i $h2 adminStatus=rxtx >/dev/null + + # Enable the transmission of Additional Ethernet Capabilities TLV + lldptool -T -i $h1 -V addEthCaps enableTx=yes >/dev/null + lldptool -T -i $h2 -V addEthCaps enableTx=yes >/dev/null + + # Wait for TLVs to be received + sleep 2 + + lldptool -i $h1 -t -n -V addEthCaps | \ + grep -q "Preemption capability active" + check_err "$?" "$h1 pMAC TX is not active" + + lldptool -i $h2 -t -n -V addEthCaps | \ + grep -q "Preemption capability active" + check_err "$?" "$h2 pMAC TX is not active" + + lldp_change_add_frag_size 3 + check_err "$?" "addFragSize 3" + + lldp_change_add_frag_size 2 + check_err "$?" "addFragSize 2" + + lldp_change_add_frag_size 1 + check_err "$?" "addFragSize 1" + + lldp_change_add_frag_size 0 + check_err "$?" "addFragSize 0" + + traffic_test $h1 "pmac" + check_err "$?" "Traffic did not get sent through $h1's pMAC" + + traffic_test $h2 "pmac" + check_err "$?" "Traffic did not get sent through $h2's pMAC" + + systemctl stop lldpad + + log_test "LLDP" +} + +h1_create() +{ + ip link set dev $h1 up + + tc qdisc add dev $h1 root mqprio num_tc 4 map 0 1 2 3 \ + queues 1@0 1@1 1@2 1@3 \ + fp P E E E \ + hw 1 + + ethtool --set-mm $h1 pmac-enabled on tx-enabled off verify-enabled off +} + +h2_create() +{ + ip link set dev $h2 up + + ethtool --set-mm $h2 pmac-enabled on tx-enabled off verify-enabled off + + tc qdisc add dev $h2 root mqprio num_tc 4 map 0 1 2 3 \ + queues 1@0 1@1 1@2 1@3 \ + fp P E E E \ + hw 1 +} + +h1_destroy() +{ + ethtool --set-mm $h1 pmac-enabled off tx-enabled off verify-enabled off + + tc qdisc del dev $h1 root + + ip link set dev $h1 down +} + +h2_destroy() +{ + tc qdisc del dev $h2 root + + ethtool --set-mm $h2 pmac-enabled off tx-enabled off verify-enabled off + + ip link set dev $h2 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + h2=${NETIFS[p2]} + + h1_create + h2_create +} + +cleanup() +{ + pre_cleanup + + h2_destroy + h1_destroy +} + +check_ethtool_mm_support +check_tc_fp_support +require_command lldptool +bail_on_lldpad "autoconfigure the MAC Merge layer" "configure it manually" + +for netif in ${NETIFS[@]}; do + ethtool --show-mm $netif 2>&1 &> /dev/null + if [[ $? -ne 0 ]]; then + echo "SKIP: $netif does not support MAC Merge" + exit $ksft_skip + fi + + if check_ethtool_pmac_std_stats_support $netif eth-mac; then + has_pmac_stats[$netif]=true + else + has_pmac_stats[$netif]=false + echo "$netif does not report pMAC statistics, falling back to aggregate" + fi +done + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/hw/ethtool_rmon.sh b/tools/testing/selftests/drivers/net/hw/ethtool_rmon.sh new file mode 100755 index 000000000000..8f60c1685ad4 --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/ethtool_rmon.sh @@ -0,0 +1,145 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +ALL_TESTS=" + rmon_rx_histogram + rmon_tx_histogram +" + +NUM_NETIFS=2 +lib_dir=$(dirname "$0") +source "$lib_dir"/../../../net/forwarding/lib.sh + +ETH_FCS_LEN=4 +ETH_HLEN=$((6+6+2)) + +declare -A netif_mtu + +ensure_mtu() +{ + local iface=$1; shift + local len=$1; shift + local current=$(ip -j link show dev $iface | jq -r '.[0].mtu') + local required=$((len - ETH_HLEN - ETH_FCS_LEN)) + + if [ $current -lt $required ]; then + ip link set dev $iface mtu $required || return 1 + fi +} + +bucket_test() +{ + local iface=$1; shift + local neigh=$1; shift + local set=$1; shift + local bucket=$1; shift + local len=$1; shift + local num_rx=10000 + local num_tx=20000 + local expected= + local before= + local after= + local delta= + + # Mausezahn does not include FCS bytes in its length - but the + # histogram counters do + len=$((len - ETH_FCS_LEN)) + len=$((len > 0 ? len : 0)) + + before=$(ethtool --json -S $iface --groups rmon | \ + jq -r ".[0].rmon[\"${set}-pktsNtoM\"][$bucket].val") + + # Send 10k one way and 20k in the other, to detect counters + # mapped to the wrong direction + $MZ $neigh -q -c $num_rx -p $len -a own -b bcast -d 10us + $MZ $iface -q -c $num_tx -p $len -a own -b bcast -d 10us + + after=$(ethtool --json -S $iface --groups rmon | \ + jq -r ".[0].rmon[\"${set}-pktsNtoM\"][$bucket].val") + + delta=$((after - before)) + + expected=$([ $set = rx ] && echo $num_rx || echo $num_tx) + + # Allow some extra tolerance for other packets sent by the stack + [ $delta -ge $expected ] && [ $delta -le $((expected + 100)) ] +} + +rmon_histogram() +{ + local iface=$1; shift + local neigh=$1; shift + local set=$1; shift + local nbuckets=0 + local step= + + RET=0 + + while read -r -a bucket; do + step="$set-pkts${bucket[0]}to${bucket[1]} on $iface" + + for if in $iface $neigh; do + if ! ensure_mtu $if ${bucket[0]}; then + log_test_xfail "$if does not support the required MTU for $step" + return + fi + done + + if ! bucket_test $iface $neigh $set $nbuckets ${bucket[0]}; then + check_err 1 "$step failed" + return 1 + fi + log_test "$step" + nbuckets=$((nbuckets + 1)) + done < <(ethtool --json -S $iface --groups rmon | \ + jq -r ".[0].rmon[\"${set}-pktsNtoM\"][]|[.low, .high]|@tsv" 2>/dev/null) + + if [ $nbuckets -eq 0 ]; then + log_test_xfail "$iface does not support $set histogram counters" + return + fi +} + +rmon_rx_histogram() +{ + rmon_histogram $h1 $h2 rx + rmon_histogram $h2 $h1 rx +} + +rmon_tx_histogram() +{ + rmon_histogram $h1 $h2 tx + rmon_histogram $h2 $h1 tx +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + h2=${NETIFS[p2]} + + for iface in $h1 $h2; do + netif_mtu[$iface]=$(ip -j link show dev $iface | jq -r '.[0].mtu') + ip link set dev $iface up + done +} + +cleanup() +{ + pre_cleanup + + for iface in $h2 $h1; do + ip link set dev $iface \ + mtu ${netif_mtu[$iface]} \ + down + done +} + +check_ethtool_counter_group_support +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/hw/hw_stats_l3.sh b/tools/testing/selftests/drivers/net/hw/hw_stats_l3.sh new file mode 100755 index 000000000000..67fafefc80be --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/hw_stats_l3.sh @@ -0,0 +1,334 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# +--------------------+ +----------------------+ +# | H1 | | H2 | +# | | | | +# | $h1.200 + | | + $h2.200 | +# | 192.0.2.1/28 | | | | 192.0.2.18/28 | +# | 2001:db8:1::1/64 | | | | 2001:db8:2::1/64 | +# | | | | | | +# | $h1 + | | + $h2 | +# | | | | | | +# +------------------|-+ +-|--------------------+ +# | | +# +------------------|-------------------------|--------------------+ +# | SW | | | +# | | | | +# | $rp1 + + $rp2 | +# | | | | +# | $rp1.200 + + $rp2.200 | +# | 192.0.2.2/28 192.0.2.17/28 | +# | 2001:db8:1::2/64 2001:db8:2::2/64 | +# | | +# +-----------------------------------------------------------------+ + +ALL_TESTS=" + ping_ipv4 + ping_ipv6 + test_stats_rx_ipv4 + test_stats_tx_ipv4 + test_stats_rx_ipv6 + test_stats_tx_ipv6 + respin_enablement + test_stats_rx_ipv4 + test_stats_tx_ipv4 + test_stats_rx_ipv6 + test_stats_tx_ipv6 + reapply_config + ping_ipv4 + ping_ipv6 + test_stats_rx_ipv4 + test_stats_tx_ipv4 + test_stats_rx_ipv6 + test_stats_tx_ipv6 + test_stats_report_rx + test_stats_report_tx + test_destroy_enabled + test_double_enable +" +NUM_NETIFS=4 +lib_dir=$(dirname "$0") +source "$lib_dir"/../../../net/forwarding/lib.sh +source "$lib_dir"/../../../net/forwarding/tc_common.sh + +h1_create() +{ + simple_if_init $h1 + vlan_create $h1 200 v$h1 192.0.2.1/28 2001:db8:1::1/64 + ip route add 192.0.2.16/28 vrf v$h1 nexthop via 192.0.2.2 + ip -6 route add 2001:db8:2::/64 vrf v$h1 nexthop via 2001:db8:1::2 +} + +h1_destroy() +{ + ip -6 route del 2001:db8:2::/64 vrf v$h1 nexthop via 2001:db8:1::2 + ip route del 192.0.2.16/28 vrf v$h1 nexthop via 192.0.2.2 + vlan_destroy $h1 200 + simple_if_fini $h1 +} + +h2_create() +{ + simple_if_init $h2 + vlan_create $h2 200 v$h2 192.0.2.18/28 2001:db8:2::1/64 + ip route add 192.0.2.0/28 vrf v$h2 nexthop via 192.0.2.17 + ip -6 route add 2001:db8:1::/64 vrf v$h2 nexthop via 2001:db8:2::2 +} + +h2_destroy() +{ + ip -6 route del 2001:db8:1::/64 vrf v$h2 nexthop via 2001:db8:2::2 + ip route del 192.0.2.0/28 vrf v$h2 nexthop via 192.0.2.17 + vlan_destroy $h2 200 + simple_if_fini $h2 +} + +router_rp1_200_create() +{ + ip link add name $rp1.200 link $rp1 type vlan id 200 + ip link set dev $rp1.200 addrgenmode eui64 + ip link set dev $rp1.200 up + ip address add dev $rp1.200 192.0.2.2/28 + ip address add dev $rp1.200 2001:db8:1::2/64 + ip stats set dev $rp1.200 l3_stats on +} + +router_rp1_200_destroy() +{ + ip stats set dev $rp1.200 l3_stats off + ip address del dev $rp1.200 2001:db8:1::2/64 + ip address del dev $rp1.200 192.0.2.2/28 + ip link del dev $rp1.200 +} + +router_create() +{ + ip link set dev $rp1 up + router_rp1_200_create + + ip link set dev $rp2 up + vlan_create $rp2 200 "" 192.0.2.17/28 2001:db8:2::2/64 +} + +router_destroy() +{ + vlan_destroy $rp2 200 + ip link set dev $rp2 down + + router_rp1_200_destroy + ip link set dev $rp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + rp1=${NETIFS[p2]} + + rp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + rp1mac=$(mac_get $rp1) + rp2mac=$(mac_get $rp2) + + vrf_prepare + + h1_create + h2_create + + router_create + + forwarding_enable +} + +cleanup() +{ + pre_cleanup + + forwarding_restore + + router_destroy + + h2_destroy + h1_destroy + + vrf_cleanup +} + +ping_ipv4() +{ + ping_test $h1.200 192.0.2.18 " IPv4" +} + +ping_ipv6() +{ + ping_test $h1.200 2001:db8:2::1 " IPv6" +} + +send_packets_rx_ipv4() +{ + # Send 21 packets instead of 20, because the first one might trap and go + # through the SW datapath, which might not bump the HW counter. + $MZ $h1.200 -c 21 -d 20msec -p 100 \ + -a own -b $rp1mac -A 192.0.2.1 -B 192.0.2.18 \ + -q -t udp sp=54321,dp=12345 +} + +send_packets_rx_ipv6() +{ + $MZ $h1.200 -6 -c 21 -d 20msec -p 100 \ + -a own -b $rp1mac -A 2001:db8:1::1 -B 2001:db8:2::1 \ + -q -t udp sp=54321,dp=12345 +} + +send_packets_tx_ipv4() +{ + $MZ $h2.200 -c 21 -d 20msec -p 100 \ + -a own -b $rp2mac -A 192.0.2.18 -B 192.0.2.1 \ + -q -t udp sp=54321,dp=12345 +} + +send_packets_tx_ipv6() +{ + $MZ $h2.200 -6 -c 21 -d 20msec -p 100 \ + -a own -b $rp2mac -A 2001:db8:2::1 -B 2001:db8:1::1 \ + -q -t udp sp=54321,dp=12345 +} + +___test_stats() +{ + local dir=$1; shift + local prot=$1; shift + + local a + local b + + a=$(hw_stats_get l3_stats $rp1.200 ${dir} packets) + send_packets_${dir}_${prot} + "$@" + b=$(busywait "$TC_HIT_TIMEOUT" until_counter_is ">= $a + 20" \ + hw_stats_get l3_stats $rp1.200 ${dir} packets) + check_err $? "Traffic not reflected in the counter: $a -> $b" +} + +__test_stats() +{ + local dir=$1; shift + local prot=$1; shift + + RET=0 + ___test_stats "$dir" "$prot" + log_test "Test $dir packets: $prot" +} + +test_stats_rx_ipv4() +{ + __test_stats rx ipv4 +} + +test_stats_tx_ipv4() +{ + __test_stats tx ipv4 +} + +test_stats_rx_ipv6() +{ + __test_stats rx ipv6 +} + +test_stats_tx_ipv6() +{ + __test_stats tx ipv6 +} + +# Make sure everything works well even after stats have been disabled and +# reenabled on the same device without touching the L3 configuration. +respin_enablement() +{ + log_info "Turning stats off and on again" + ip stats set dev $rp1.200 l3_stats off + ip stats set dev $rp1.200 l3_stats on +} + +# For the initial run, l3_stats is enabled on a completely set up netdevice. Now +# do it the other way around: enabling the L3 stats on an L2 netdevice, and only +# then apply the L3 configuration. +reapply_config() +{ + log_info "Reapplying configuration" + + router_rp1_200_destroy + + ip link add name $rp1.200 link $rp1 type vlan id 200 + ip link set dev $rp1.200 addrgenmode none + ip stats set dev $rp1.200 l3_stats on + ip link set dev $rp1.200 addrgenmode eui64 + ip link set dev $rp1.200 up + ip address add dev $rp1.200 192.0.2.2/28 + ip address add dev $rp1.200 2001:db8:1::2/64 +} + +__test_stats_report() +{ + local dir=$1; shift + local prot=$1; shift + + local a + local b + + RET=0 + + a=$(hw_stats_get l3_stats $rp1.200 ${dir} packets) + send_packets_${dir}_${prot} + ip address flush dev $rp1.200 + b=$(busywait "$TC_HIT_TIMEOUT" until_counter_is ">= $a + 20" \ + hw_stats_get l3_stats $rp1.200 ${dir} packets) + check_err $? "Traffic not reflected in the counter: $a -> $b" + log_test "Test ${dir} packets: stats pushed on loss of L3" + + ip stats set dev $rp1.200 l3_stats off + ip link del dev $rp1.200 + router_rp1_200_create +} + +test_stats_report_rx() +{ + __test_stats_report rx ipv4 +} + +test_stats_report_tx() +{ + __test_stats_report tx ipv4 +} + +test_destroy_enabled() +{ + RET=0 + + ip link del dev $rp1.200 + router_rp1_200_create + + log_test "Destroy l3_stats-enabled netdev" +} + +test_double_enable() +{ + RET=0 + ___test_stats rx ipv4 \ + ip stats set dev $rp1.200 l3_stats on + log_test "Test stat retention across a spurious enablement" +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +used=$(ip -j stats show dev $rp1.200 group offload subgroup hw_stats_info | + jq '.[].info.l3_stats.used') +[[ $used = true ]] +check_err $? "hw_stats_info.used=$used" +log_test "l3_stats offloaded" +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/hw/hw_stats_l3_gre.sh b/tools/testing/selftests/drivers/net/hw/hw_stats_l3_gre.sh new file mode 100755 index 000000000000..a94d92e1abce --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/hw_stats_l3_gre.sh @@ -0,0 +1,111 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test L3 stats on IP-in-IP GRE tunnel without key. + +# This test uses flat topology for IP tunneling tests. See ipip_lib.sh for more +# details. + +ALL_TESTS=" + ping_ipv4 + test_stats_rx + test_stats_tx +" +NUM_NETIFS=6 +lib_dir=$(dirname "$0") +source "$lib_dir"/../../../net/forwarding/lib.sh +source "$lib_dir"/../../../net/forwarding/ipip_lib.sh +source "$lib_dir"/../../../net/forwarding/tc_common.sh + +setup_prepare() +{ + h1=${NETIFS[p1]} + ol1=${NETIFS[p2]} + + ul1=${NETIFS[p3]} + ul2=${NETIFS[p4]} + + ol2=${NETIFS[p5]} + h2=${NETIFS[p6]} + + ol1mac=$(mac_get $ol1) + + forwarding_enable + vrf_prepare + h1_create + h2_create + sw1_flat_create gre $ol1 $ul1 + sw2_flat_create gre $ol2 $ul2 + ip stats set dev g1a l3_stats on + ip stats set dev g2a l3_stats on +} + +cleanup() +{ + pre_cleanup + + ip stats set dev g1a l3_stats off + ip stats set dev g2a l3_stats off + + sw2_flat_destroy $ol2 $ul2 + sw1_flat_destroy $ol1 $ul1 + h2_destroy + h1_destroy + + vrf_cleanup + forwarding_restore +} + +ping_ipv4() +{ + RET=0 + + ping_test $h1 192.0.2.18 " gre flat" +} + +send_packets_ipv4() +{ + # Send 21 packets instead of 20, because the first one might trap and go + # through the SW datapath, which might not bump the HW counter. + $MZ $h1 -c 21 -d 20msec -p 100 \ + -a own -b $ol1mac -A 192.0.2.1 -B 192.0.2.18 \ + -q -t udp sp=54321,dp=12345 +} + +test_stats() +{ + local dev=$1; shift + local dir=$1; shift + + local a + local b + + RET=0 + + a=$(hw_stats_get l3_stats $dev $dir packets) + send_packets_ipv4 + b=$(busywait "$TC_HIT_TIMEOUT" until_counter_is ">= $a + 20" \ + hw_stats_get l3_stats $dev $dir packets) + check_err $? "Traffic not reflected in the counter: $a -> $b" + + log_test "Test $dir packets: $prot" +} + +test_stats_tx() +{ + test_stats g1a tx +} + +test_stats_rx() +{ + test_stats g2a rx +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/hw/iou-zcrx.c b/tools/testing/selftests/drivers/net/hw/iou-zcrx.c new file mode 100644 index 000000000000..62456df947bc --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/iou-zcrx.c @@ -0,0 +1,464 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <assert.h> +#include <errno.h> +#include <error.h> +#include <fcntl.h> +#include <limits.h> +#include <stdbool.h> +#include <stdint.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <unistd.h> + +#include <arpa/inet.h> +#include <linux/errqueue.h> +#include <linux/if_packet.h> +#include <linux/ipv6.h> +#include <linux/socket.h> +#include <linux/sockios.h> +#include <net/ethernet.h> +#include <net/if.h> +#include <netinet/in.h> +#include <netinet/ip.h> +#include <netinet/ip6.h> +#include <netinet/tcp.h> +#include <netinet/udp.h> +#include <sys/epoll.h> +#include <sys/ioctl.h> +#include <sys/mman.h> +#include <sys/resource.h> +#include <sys/socket.h> +#include <sys/stat.h> +#include <sys/time.h> +#include <sys/types.h> +#include <sys/un.h> +#include <sys/wait.h> + +#include <liburing.h> + +static long page_size; +#define AREA_SIZE (8192 * page_size) +#define SEND_SIZE (512 * 4096) +#define min(a, b) \ + ({ \ + typeof(a) _a = (a); \ + typeof(b) _b = (b); \ + _a < _b ? _a : _b; \ + }) +#define min_t(t, a, b) \ + ({ \ + t _ta = (a); \ + t _tb = (b); \ + min(_ta, _tb); \ + }) + +#define ALIGN_UP(v, align) (((v) + (align) - 1) & ~((align) - 1)) + +static int cfg_server; +static int cfg_client; +static int cfg_port = 8000; +static int cfg_payload_len; +static const char *cfg_ifname; +static int cfg_queue_id = -1; +static bool cfg_oneshot; +static int cfg_oneshot_recvs; +static int cfg_send_size = SEND_SIZE; +static struct sockaddr_in6 cfg_addr; + +static char *payload; +static void *area_ptr; +static void *ring_ptr; +static size_t ring_size; +static struct io_uring_zcrx_rq rq_ring; +static unsigned long area_token; +static int connfd; +static bool stop; +static size_t received; + +static unsigned long gettimeofday_ms(void) +{ + struct timeval tv; + + gettimeofday(&tv, NULL); + return (tv.tv_sec * 1000) + (tv.tv_usec / 1000); +} + +static int parse_address(const char *str, int port, struct sockaddr_in6 *sin6) +{ + int ret; + + sin6->sin6_family = AF_INET6; + sin6->sin6_port = htons(port); + + ret = inet_pton(sin6->sin6_family, str, &sin6->sin6_addr); + if (ret != 1) { + /* fallback to plain IPv4 */ + ret = inet_pton(AF_INET, str, &sin6->sin6_addr.s6_addr32[3]); + if (ret != 1) + return -1; + + /* add ::ffff prefix */ + sin6->sin6_addr.s6_addr32[0] = 0; + sin6->sin6_addr.s6_addr32[1] = 0; + sin6->sin6_addr.s6_addr16[4] = 0; + sin6->sin6_addr.s6_addr16[5] = 0xffff; + } + + return 0; +} + +static inline size_t get_refill_ring_size(unsigned int rq_entries) +{ + size_t size; + + ring_size = rq_entries * sizeof(struct io_uring_zcrx_rqe); + /* add space for the header (head/tail/etc.) */ + ring_size += page_size; + return ALIGN_UP(ring_size, page_size); +} + +static void setup_zcrx(struct io_uring *ring) +{ + unsigned int ifindex; + unsigned int rq_entries = 4096; + int ret; + + ifindex = if_nametoindex(cfg_ifname); + if (!ifindex) + error(1, 0, "bad interface name: %s", cfg_ifname); + + area_ptr = mmap(NULL, + AREA_SIZE, + PROT_READ | PROT_WRITE, + MAP_ANONYMOUS | MAP_PRIVATE, + 0, + 0); + if (area_ptr == MAP_FAILED) + error(1, 0, "mmap(): zero copy area"); + + ring_size = get_refill_ring_size(rq_entries); + ring_ptr = mmap(NULL, + ring_size, + PROT_READ | PROT_WRITE, + MAP_ANONYMOUS | MAP_PRIVATE, + 0, + 0); + + struct io_uring_region_desc region_reg = { + .size = ring_size, + .user_addr = (__u64)(unsigned long)ring_ptr, + .flags = IORING_MEM_REGION_TYPE_USER, + }; + + struct io_uring_zcrx_area_reg area_reg = { + .addr = (__u64)(unsigned long)area_ptr, + .len = AREA_SIZE, + .flags = 0, + }; + + struct io_uring_zcrx_ifq_reg reg = { + .if_idx = ifindex, + .if_rxq = cfg_queue_id, + .rq_entries = rq_entries, + .area_ptr = (__u64)(unsigned long)&area_reg, + .region_ptr = (__u64)(unsigned long)®ion_reg, + }; + + ret = io_uring_register_ifq(ring, ®); + if (ret) + error(1, 0, "io_uring_register_ifq(): %d", ret); + + rq_ring.khead = (unsigned int *)((char *)ring_ptr + reg.offsets.head); + rq_ring.ktail = (unsigned int *)((char *)ring_ptr + reg.offsets.tail); + rq_ring.rqes = (struct io_uring_zcrx_rqe *)((char *)ring_ptr + reg.offsets.rqes); + rq_ring.rq_tail = 0; + rq_ring.ring_entries = reg.rq_entries; + + area_token = area_reg.rq_area_token; +} + +static void add_accept(struct io_uring *ring, int sockfd) +{ + struct io_uring_sqe *sqe; + + sqe = io_uring_get_sqe(ring); + + io_uring_prep_accept(sqe, sockfd, NULL, NULL, 0); + sqe->user_data = 1; +} + +static void add_recvzc(struct io_uring *ring, int sockfd) +{ + struct io_uring_sqe *sqe; + + sqe = io_uring_get_sqe(ring); + + io_uring_prep_rw(IORING_OP_RECV_ZC, sqe, sockfd, NULL, 0, 0); + sqe->ioprio |= IORING_RECV_MULTISHOT; + sqe->user_data = 2; +} + +static void add_recvzc_oneshot(struct io_uring *ring, int sockfd, size_t len) +{ + struct io_uring_sqe *sqe; + + sqe = io_uring_get_sqe(ring); + + io_uring_prep_rw(IORING_OP_RECV_ZC, sqe, sockfd, NULL, len, 0); + sqe->ioprio |= IORING_RECV_MULTISHOT; + sqe->user_data = 2; +} + +static void process_accept(struct io_uring *ring, struct io_uring_cqe *cqe) +{ + if (cqe->res < 0) + error(1, 0, "accept()"); + if (connfd) + error(1, 0, "Unexpected second connection"); + + connfd = cqe->res; + if (cfg_oneshot) + add_recvzc_oneshot(ring, connfd, page_size); + else + add_recvzc(ring, connfd); +} + +static void process_recvzc(struct io_uring *ring, struct io_uring_cqe *cqe) +{ + unsigned rq_mask = rq_ring.ring_entries - 1; + struct io_uring_zcrx_cqe *rcqe; + struct io_uring_zcrx_rqe *rqe; + struct io_uring_sqe *sqe; + uint64_t mask; + char *data; + ssize_t n; + int i; + + if (cqe->res == 0 && cqe->flags == 0 && cfg_oneshot_recvs == 0) { + stop = true; + return; + } + + if (cqe->res < 0) + error(1, 0, "recvzc(): %d", cqe->res); + + if (cfg_oneshot) { + if (cqe->res == 0 && cqe->flags == 0 && cfg_oneshot_recvs) { + add_recvzc_oneshot(ring, connfd, page_size); + cfg_oneshot_recvs--; + } + } else if (!(cqe->flags & IORING_CQE_F_MORE)) { + add_recvzc(ring, connfd); + } + + rcqe = (struct io_uring_zcrx_cqe *)(cqe + 1); + + n = cqe->res; + mask = (1ULL << IORING_ZCRX_AREA_SHIFT) - 1; + data = (char *)area_ptr + (rcqe->off & mask); + + for (i = 0; i < n; i++) { + if (*(data + i) != payload[(received + i)]) + error(1, 0, "payload mismatch at %d", i); + } + received += n; + + rqe = &rq_ring.rqes[(rq_ring.rq_tail & rq_mask)]; + rqe->off = (rcqe->off & ~IORING_ZCRX_AREA_MASK) | area_token; + rqe->len = cqe->res; + io_uring_smp_store_release(rq_ring.ktail, ++rq_ring.rq_tail); +} + +static void server_loop(struct io_uring *ring) +{ + struct io_uring_cqe *cqe; + unsigned int count = 0; + unsigned int head; + int i, ret; + + io_uring_submit_and_wait(ring, 1); + + io_uring_for_each_cqe(ring, head, cqe) { + if (cqe->user_data == 1) + process_accept(ring, cqe); + else if (cqe->user_data == 2) + process_recvzc(ring, cqe); + else + error(1, 0, "unknown cqe"); + count++; + } + io_uring_cq_advance(ring, count); +} + +static void run_server(void) +{ + unsigned int flags = 0; + struct io_uring ring; + int fd, enable, ret; + uint64_t tstop; + + fd = socket(AF_INET6, SOCK_STREAM, 0); + if (fd == -1) + error(1, 0, "socket()"); + + enable = 1; + ret = setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &enable, sizeof(int)); + if (ret < 0) + error(1, 0, "setsockopt(SO_REUSEADDR)"); + + ret = bind(fd, (struct sockaddr *)&cfg_addr, sizeof(cfg_addr)); + if (ret < 0) + error(1, 0, "bind()"); + + if (listen(fd, 1024) < 0) + error(1, 0, "listen()"); + + flags |= IORING_SETUP_COOP_TASKRUN; + flags |= IORING_SETUP_SINGLE_ISSUER; + flags |= IORING_SETUP_DEFER_TASKRUN; + flags |= IORING_SETUP_SUBMIT_ALL; + flags |= IORING_SETUP_CQE32; + + io_uring_queue_init(512, &ring, flags); + + setup_zcrx(&ring); + + add_accept(&ring, fd); + + tstop = gettimeofday_ms() + 5000; + while (!stop && gettimeofday_ms() < tstop) + server_loop(&ring); + + if (!stop) + error(1, 0, "test failed\n"); +} + +static void run_client(void) +{ + ssize_t to_send = cfg_send_size; + ssize_t sent = 0; + ssize_t chunk, res; + int fd; + + fd = socket(AF_INET6, SOCK_STREAM, 0); + if (fd == -1) + error(1, 0, "socket()"); + + if (connect(fd, (struct sockaddr *)&cfg_addr, sizeof(cfg_addr))) + error(1, 0, "connect()"); + + while (to_send) { + void *src = &payload[sent]; + + chunk = min_t(ssize_t, cfg_payload_len, to_send); + res = send(fd, src, chunk, 0); + if (res < 0) + error(1, 0, "send(): %zd", sent); + sent += res; + to_send -= res; + } + + close(fd); +} + +static void usage(const char *filepath) +{ + error(1, 0, "Usage: %s (-4|-6) (-s|-c) -h<server_ip> -p<port> " + "-l<payload_size> -i<ifname> -q<rxq_id>", filepath); +} + +static void parse_opts(int argc, char **argv) +{ + const int max_payload_len = SEND_SIZE - + sizeof(struct ipv6hdr) - + sizeof(struct tcphdr) - + 40 /* max tcp options */; + struct sockaddr_in6 *addr6 = (void *) &cfg_addr; + char *addr = NULL; + int ret; + int c; + + if (argc <= 1) + usage(argv[0]); + cfg_payload_len = max_payload_len; + + while ((c = getopt(argc, argv, "sch:p:l:i:q:o:z:")) != -1) { + switch (c) { + case 's': + if (cfg_client) + error(1, 0, "Pass one of -s or -c"); + cfg_server = 1; + break; + case 'c': + if (cfg_server) + error(1, 0, "Pass one of -s or -c"); + cfg_client = 1; + break; + case 'h': + addr = optarg; + break; + case 'p': + cfg_port = strtoul(optarg, NULL, 0); + break; + case 'l': + cfg_payload_len = strtoul(optarg, NULL, 0); + break; + case 'i': + cfg_ifname = optarg; + break; + case 'q': + cfg_queue_id = strtoul(optarg, NULL, 0); + break; + case 'o': { + cfg_oneshot = true; + cfg_oneshot_recvs = strtoul(optarg, NULL, 0); + break; + } + case 'z': + cfg_send_size = strtoul(optarg, NULL, 0); + break; + } + } + + if (cfg_server && addr) + error(1, 0, "Receiver cannot have -h specified"); + + memset(addr6, 0, sizeof(*addr6)); + addr6->sin6_family = AF_INET6; + addr6->sin6_port = htons(cfg_port); + addr6->sin6_addr = in6addr_any; + if (addr) { + ret = parse_address(addr, cfg_port, addr6); + if (ret) + error(1, 0, "receiver address parse error: %s", addr); + } + + if (cfg_payload_len > max_payload_len) + error(1, 0, "-l: payload exceeds max (%d)", max_payload_len); +} + +int main(int argc, char **argv) +{ + const char *cfg_test = argv[argc - 1]; + int i; + + page_size = sysconf(_SC_PAGESIZE); + if (page_size < 0) + return 1; + + if (posix_memalign((void **)&payload, page_size, SEND_SIZE)) + return 1; + + parse_opts(argc, argv); + + for (i = 0; i < SEND_SIZE; i++) + payload[i] = 'a' + (i % 26); + + if (cfg_server) + run_server(); + else if (cfg_client) + run_client(); + + return 0; +} diff --git a/tools/testing/selftests/drivers/net/hw/iou-zcrx.py b/tools/testing/selftests/drivers/net/hw/iou-zcrx.py new file mode 100755 index 000000000000..9c03fd777f3d --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/iou-zcrx.py @@ -0,0 +1,145 @@ +#!/usr/bin/env python3 +# SPDX-License-Identifier: GPL-2.0 + +import re +from os import path +from lib.py import ksft_run, ksft_exit +from lib.py import NetDrvEpEnv +from lib.py import bkg, cmd, defer, ethtool, rand_port, wait_port_listen + + +def _get_current_settings(cfg): + output = ethtool(f"-g {cfg.ifname}", json=True, host=cfg.remote)[0] + return (output['rx'], output['hds-thresh']) + + +def _get_combined_channels(cfg): + output = ethtool(f"-l {cfg.ifname}", host=cfg.remote).stdout + values = re.findall(r'Combined:\s+(\d+)', output) + return int(values[1]) + + +def _create_rss_ctx(cfg, chan): + output = ethtool(f"-X {cfg.ifname} context new start {chan} equal 1", host=cfg.remote).stdout + values = re.search(r'New RSS context is (\d+)', output).group(1) + ctx_id = int(values) + return (ctx_id, defer(ethtool, f"-X {cfg.ifname} delete context {ctx_id}", host=cfg.remote)) + + +def _set_flow_rule(cfg, port, chan): + output = ethtool(f"-N {cfg.ifname} flow-type tcp6 dst-port {port} action {chan}", host=cfg.remote).stdout + values = re.search(r'ID (\d+)', output).group(1) + return int(values) + + +def _set_flow_rule_rss(cfg, port, ctx_id): + output = ethtool(f"-N {cfg.ifname} flow-type tcp6 dst-port {port} context {ctx_id}", host=cfg.remote).stdout + values = re.search(r'ID (\d+)', output).group(1) + return int(values) + + +def test_zcrx(cfg) -> None: + cfg.require_ipver('6') + + combined_chans = _get_combined_channels(cfg) + if combined_chans < 2: + raise KsftSkipEx('at least 2 combined channels required') + (rx_ring, hds_thresh) = _get_current_settings(cfg) + port = rand_port() + + ethtool(f"-G {cfg.ifname} tcp-data-split on", host=cfg.remote) + defer(ethtool, f"-G {cfg.ifname} tcp-data-split auto", host=cfg.remote) + + ethtool(f"-G {cfg.ifname} hds-thresh 0", host=cfg.remote) + defer(ethtool, f"-G {cfg.ifname} hds-thresh {hds_thresh}", host=cfg.remote) + + ethtool(f"-G {cfg.ifname} rx 64", host=cfg.remote) + defer(ethtool, f"-G {cfg.ifname} rx {rx_ring}", host=cfg.remote) + + ethtool(f"-X {cfg.ifname} equal {combined_chans - 1}", host=cfg.remote) + defer(ethtool, f"-X {cfg.ifname} default", host=cfg.remote) + + flow_rule_id = _set_flow_rule(cfg, port, combined_chans - 1) + defer(ethtool, f"-N {cfg.ifname} delete {flow_rule_id}", host=cfg.remote) + + rx_cmd = f"{cfg.bin_remote} -s -p {port} -i {cfg.ifname} -q {combined_chans - 1}" + tx_cmd = f"{cfg.bin_local} -c -h {cfg.remote_addr_v['6']} -p {port} -l 12840" + with bkg(rx_cmd, host=cfg.remote, exit_wait=True): + wait_port_listen(port, proto="tcp", host=cfg.remote) + cmd(tx_cmd) + + +def test_zcrx_oneshot(cfg) -> None: + cfg.require_ipver('6') + + combined_chans = _get_combined_channels(cfg) + if combined_chans < 2: + raise KsftSkipEx('at least 2 combined channels required') + (rx_ring, hds_thresh) = _get_current_settings(cfg) + port = rand_port() + + ethtool(f"-G {cfg.ifname} tcp-data-split on", host=cfg.remote) + defer(ethtool, f"-G {cfg.ifname} tcp-data-split auto", host=cfg.remote) + + ethtool(f"-G {cfg.ifname} hds-thresh 0", host=cfg.remote) + defer(ethtool, f"-G {cfg.ifname} hds-thresh {hds_thresh}", host=cfg.remote) + + ethtool(f"-G {cfg.ifname} rx 64", host=cfg.remote) + defer(ethtool, f"-G {cfg.ifname} rx {rx_ring}", host=cfg.remote) + + ethtool(f"-X {cfg.ifname} equal {combined_chans - 1}", host=cfg.remote) + defer(ethtool, f"-X {cfg.ifname} default", host=cfg.remote) + + flow_rule_id = _set_flow_rule(cfg, port, combined_chans - 1) + defer(ethtool, f"-N {cfg.ifname} delete {flow_rule_id}", host=cfg.remote) + + rx_cmd = f"{cfg.bin_remote} -s -p {port} -i {cfg.ifname} -q {combined_chans - 1} -o 4" + tx_cmd = f"{cfg.bin_local} -c -h {cfg.remote_addr_v['6']} -p {port} -l 4096 -z 16384" + with bkg(rx_cmd, host=cfg.remote, exit_wait=True): + wait_port_listen(port, proto="tcp", host=cfg.remote) + cmd(tx_cmd) + + +def test_zcrx_rss(cfg) -> None: + cfg.require_ipver('6') + + combined_chans = _get_combined_channels(cfg) + if combined_chans < 2: + raise KsftSkipEx('at least 2 combined channels required') + (rx_ring, hds_thresh) = _get_current_settings(cfg) + port = rand_port() + + ethtool(f"-G {cfg.ifname} tcp-data-split on", host=cfg.remote) + defer(ethtool, f"-G {cfg.ifname} tcp-data-split auto", host=cfg.remote) + + ethtool(f"-G {cfg.ifname} hds-thresh 0", host=cfg.remote) + defer(ethtool, f"-G {cfg.ifname} hds-thresh {hds_thresh}", host=cfg.remote) + + ethtool(f"-G {cfg.ifname} rx 64", host=cfg.remote) + defer(ethtool, f"-G {cfg.ifname} rx {rx_ring}", host=cfg.remote) + + ethtool(f"-X {cfg.ifname} equal {combined_chans - 1}", host=cfg.remote) + defer(ethtool, f"-X {cfg.ifname} default", host=cfg.remote) + + (ctx_id, delete_ctx) = _create_rss_ctx(cfg, combined_chans - 1) + flow_rule_id = _set_flow_rule_rss(cfg, port, ctx_id) + defer(ethtool, f"-N {cfg.ifname} delete {flow_rule_id}", host=cfg.remote) + + rx_cmd = f"{cfg.bin_remote} -s -p {port} -i {cfg.ifname} -q {combined_chans - 1}" + tx_cmd = f"{cfg.bin_local} -c -h {cfg.remote_addr_v['6']} -p {port} -l 12840" + with bkg(rx_cmd, host=cfg.remote, exit_wait=True): + wait_port_listen(port, proto="tcp", host=cfg.remote) + cmd(tx_cmd) + + +def main() -> None: + with NetDrvEpEnv(__file__) as cfg: + cfg.bin_local = path.abspath(path.dirname(__file__) + "/../../../drivers/net/hw/iou-zcrx") + cfg.bin_remote = cfg.remote.deploy(cfg.bin_local) + + ksft_run(globs=globals(), case_pfx={"test_"}, args=(cfg, )) + ksft_exit() + + +if __name__ == "__main__": + main() diff --git a/tools/testing/selftests/drivers/net/hw/irq.py b/tools/testing/selftests/drivers/net/hw/irq.py new file mode 100755 index 000000000000..0699d6a8b4e2 --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/irq.py @@ -0,0 +1,99 @@ +#!/usr/bin/env python3 +# SPDX-License-Identifier: GPL-2.0 + +from lib.py import ksft_run, ksft_exit +from lib.py import ksft_ge, ksft_eq +from lib.py import KsftSkipEx +from lib.py import ksft_disruptive +from lib.py import EthtoolFamily, NetdevFamily +from lib.py import NetDrvEnv +from lib.py import cmd, ip, defer + + +def read_affinity(irq) -> str: + with open(f'/proc/irq/{irq}/smp_affinity', 'r') as fp: + return fp.read().lstrip("0,").strip() + + +def write_affinity(irq, what) -> str: + if what != read_affinity(irq): + with open(f'/proc/irq/{irq}/smp_affinity', 'w') as fp: + fp.write(what) + + +def check_irqs_reported(cfg) -> None: + """ Check that device reports IRQs for NAPI instances """ + napis = cfg.netnl.napi_get({"ifindex": cfg.ifindex}, dump=True) + irqs = sum(['irq' in x for x in napis]) + + ksft_ge(irqs, 1) + ksft_eq(irqs, len(napis)) + + +def _check_reconfig(cfg, reconfig_cb) -> None: + napis = cfg.netnl.napi_get({"ifindex": cfg.ifindex}, dump=True) + for n in reversed(napis): + if 'irq' in n: + break + else: + raise KsftSkipEx(f"Device has no NAPI with IRQ attribute (#napis: {len(napis)}") + + old = read_affinity(n['irq']) + # pick an affinity that's not the current one + new = "3" if old != "3" else "5" + write_affinity(n['irq'], new) + defer(write_affinity, n['irq'], old) + + reconfig_cb(cfg) + + ksft_eq(read_affinity(n['irq']), new, comment="IRQ affinity changed after reconfig") + + +def check_reconfig_queues(cfg) -> None: + def reconfig(cfg) -> None: + channels = cfg.ethnl.channels_get({'header': {'dev-index': cfg.ifindex}}) + if channels['combined-count'] == 0: + rx_type = 'rx' + else: + rx_type = 'combined' + cur_queue_cnt = channels[f'{rx_type}-count'] + max_queue_cnt = channels[f'{rx_type}-max'] + + cmd(f"ethtool -L {cfg.ifname} {rx_type} 1") + cmd(f"ethtool -L {cfg.ifname} {rx_type} {max_queue_cnt}") + cmd(f"ethtool -L {cfg.ifname} {rx_type} {cur_queue_cnt}") + + _check_reconfig(cfg, reconfig) + + +def check_reconfig_xdp(cfg) -> None: + def reconfig(cfg) -> None: + ip(f"link set dev %s xdp obj %s sec xdp" % + (cfg.ifname, cfg.net_lib_dir / "xdp_dummy.bpf.o")) + ip(f"link set dev %s xdp off" % cfg.ifname) + + _check_reconfig(cfg, reconfig) + + +@ksft_disruptive +def check_down(cfg) -> None: + def reconfig(cfg) -> None: + ip("link set dev %s down" % cfg.ifname) + ip("link set dev %s up" % cfg.ifname) + + _check_reconfig(cfg, reconfig) + + +def main() -> None: + with NetDrvEnv(__file__, nsim_test=False) as cfg: + cfg.ethnl = EthtoolFamily() + cfg.netnl = NetdevFamily() + + ksft_run([check_irqs_reported, check_reconfig_queues, + check_reconfig_xdp, check_down], + args=(cfg, )) + ksft_exit() + + +if __name__ == "__main__": + main() diff --git a/tools/testing/selftests/drivers/net/hw/lib/py/__init__.py b/tools/testing/selftests/drivers/net/hw/lib/py/__init__.py new file mode 100644 index 000000000000..b582885786f5 --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/lib/py/__init__.py @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0 + +import sys +from pathlib import Path + +KSFT_DIR = (Path(__file__).parent / "../../../../..").resolve() + +try: + sys.path.append(KSFT_DIR.as_posix()) + from net.lib.py import * + from drivers.net.lib.py import * +except ModuleNotFoundError as e: + ksft_pr("Failed importing `net` library from kernel sources") + ksft_pr(str(e)) + ktap_result(True, comment="SKIP") + sys.exit(4) diff --git a/tools/testing/selftests/drivers/net/hw/loopback.sh b/tools/testing/selftests/drivers/net/hw/loopback.sh new file mode 100755 index 000000000000..5acc3ff820aa --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/loopback.sh @@ -0,0 +1,103 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + +ALL_TESTS="loopback_test" +NUM_NETIFS=2 +lib_dir=$(dirname "$0") +source "$lib_dir"/../../../net/forwarding/tc_common.sh +source "$lib_dir"/../../../net/forwarding/lib.sh + +h1_create() +{ + simple_if_init $h1 192.0.2.1/24 + tc qdisc add dev $h1 clsact +} + +h1_destroy() +{ + tc qdisc del dev $h1 clsact + simple_if_fini $h1 192.0.2.1/24 +} + +h2_create() +{ + simple_if_init $h2 +} + +h2_destroy() +{ + simple_if_fini $h2 +} + +loopback_test() +{ + RET=0 + + tc filter add dev $h1 ingress protocol arp pref 1 handle 101 flower \ + skip_hw arp_op reply arp_tip 192.0.2.1 action drop + + $MZ $h1 -c 1 -t arp -q + + tc_check_packets "dev $h1 ingress" 101 1 + check_fail $? "Matched on a filter without loopback setup" + + ethtool -K $h1 loopback on + check_err $? "Failed to enable loopback" + + setup_wait_dev $h1 + + $MZ $h1 -c 1 -t arp -q + + tc_check_packets "dev $h1 ingress" 101 1 + check_err $? "Did not match on filter with loopback" + + ethtool -K $h1 loopback off + check_err $? "Failed to disable loopback" + + $MZ $h1 -c 1 -t arp -q + + tc_check_packets "dev $h1 ingress" 101 2 + check_fail $? "Matched on a filter after loopback was removed" + + tc filter del dev $h1 ingress protocol arp pref 1 handle 101 flower + + log_test "loopback" +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + h2=${NETIFS[p2]} + + vrf_prepare + + h1_create + h2_create + + if ethtool -k $h1 | grep loopback | grep -q fixed; then + log_test "SKIP: dev $h1 does not support loopback feature" + exit $ksft_skip + fi +} + +cleanup() +{ + pre_cleanup + + h2_destroy + h1_destroy + + vrf_cleanup +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/hw/ncdevmem.c b/tools/testing/selftests/drivers/net/hw/ncdevmem.c new file mode 100644 index 000000000000..02e4d3d7ded2 --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/ncdevmem.c @@ -0,0 +1,1071 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * tcpdevmem netcat. Works similarly to netcat but does device memory TCP + * instead of regular TCP. Uses udmabuf to mock a dmabuf provider. + * + * Usage: + * + * On server: + * ncdevmem -s <server IP> [-c <client IP>] -f eth1 -l -p 5201 + * + * On client: + * echo -n "hello\nworld" | \ + * ncdevmem -s <server IP> [-c <client IP>] -p 5201 -f eth1 + * + * Note this is compatible with regular netcat. i.e. the sender or receiver can + * be replaced with regular netcat to test the RX or TX path in isolation. + * + * Test data validation (devmem TCP on RX only): + * + * On server: + * ncdevmem -s <server IP> [-c <client IP>] -f eth1 -l -p 5201 -v 7 + * + * On client: + * yes $(echo -e \\x01\\x02\\x03\\x04\\x05\\x06) | \ + * head -c 1G | \ + * nc <server IP> 5201 -p 5201 + * + * Test data validation (devmem TCP on RX and TX, validation happens on RX): + * + * On server: + * ncdevmem -s <server IP> [-c <client IP>] -l -p 5201 -v 8 -f eth1 + * + * On client: + * yes $(echo -e \\x01\\x02\\x03\\x04\\x05\\x06\\x07) | \ + * head -c 1M | \ + * ncdevmem -s <server IP> [-c <client IP>] -p 5201 -f eth1 + */ +#define _GNU_SOURCE +#define __EXPORTED_HEADERS__ + +#include <linux/uio.h> +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> +#include <stdbool.h> +#include <string.h> +#include <errno.h> +#define __iovec_defined +#include <fcntl.h> +#include <malloc.h> +#include <error.h> +#include <poll.h> + +#include <arpa/inet.h> +#include <sys/socket.h> +#include <sys/mman.h> +#include <sys/ioctl.h> +#include <sys/syscall.h> +#include <sys/time.h> + +#include <linux/memfd.h> +#include <linux/dma-buf.h> +#include <linux/errqueue.h> +#include <linux/udmabuf.h> +#include <linux/types.h> +#include <linux/netlink.h> +#include <linux/genetlink.h> +#include <linux/netdev.h> +#include <linux/ethtool_netlink.h> +#include <time.h> +#include <net/if.h> + +#include "netdev-user.h" +#include "ethtool-user.h" +#include <ynl.h> + +#define PAGE_SHIFT 12 +#define TEST_PREFIX "ncdevmem" +#define NUM_PAGES 16000 + +#ifndef MSG_SOCK_DEVMEM +#define MSG_SOCK_DEVMEM 0x2000000 +#endif + +#define MAX_IOV 1024 + +static size_t max_chunk; +static char *server_ip; +static char *client_ip; +static char *port; +static size_t do_validation; +static int start_queue = -1; +static int num_queues = -1; +static char *ifname; +static unsigned int ifindex; +static unsigned int dmabuf_id; +static uint32_t tx_dmabuf_id; +static int waittime_ms = 500; + +struct memory_buffer { + int fd; + size_t size; + + int devfd; + int memfd; + char *buf_mem; +}; + +struct memory_provider { + struct memory_buffer *(*alloc)(size_t size); + void (*free)(struct memory_buffer *ctx); + void (*memcpy_to_device)(struct memory_buffer *dst, size_t off, + void *src, int n); + void (*memcpy_from_device)(void *dst, struct memory_buffer *src, + size_t off, int n); +}; + +static struct memory_buffer *udmabuf_alloc(size_t size) +{ + struct udmabuf_create create; + struct memory_buffer *ctx; + int ret; + + ctx = malloc(sizeof(*ctx)); + if (!ctx) + error(1, ENOMEM, "malloc failed"); + + ctx->size = size; + + ctx->devfd = open("/dev/udmabuf", O_RDWR); + if (ctx->devfd < 0) + error(1, errno, + "%s: [skip,no-udmabuf: Unable to access DMA buffer device file]\n", + TEST_PREFIX); + + ctx->memfd = memfd_create("udmabuf-test", MFD_ALLOW_SEALING); + if (ctx->memfd < 0) + error(1, errno, "%s: [skip,no-memfd]\n", TEST_PREFIX); + + ret = fcntl(ctx->memfd, F_ADD_SEALS, F_SEAL_SHRINK); + if (ret < 0) + error(1, errno, "%s: [skip,fcntl-add-seals]\n", TEST_PREFIX); + + ret = ftruncate(ctx->memfd, size); + if (ret == -1) + error(1, errno, "%s: [FAIL,memfd-truncate]\n", TEST_PREFIX); + + memset(&create, 0, sizeof(create)); + + create.memfd = ctx->memfd; + create.offset = 0; + create.size = size; + ctx->fd = ioctl(ctx->devfd, UDMABUF_CREATE, &create); + if (ctx->fd < 0) + error(1, errno, "%s: [FAIL, create udmabuf]\n", TEST_PREFIX); + + ctx->buf_mem = mmap(NULL, size, PROT_READ | PROT_WRITE, MAP_SHARED, + ctx->fd, 0); + if (ctx->buf_mem == MAP_FAILED) + error(1, errno, "%s: [FAIL, map udmabuf]\n", TEST_PREFIX); + + return ctx; +} + +static void udmabuf_free(struct memory_buffer *ctx) +{ + munmap(ctx->buf_mem, ctx->size); + close(ctx->fd); + close(ctx->memfd); + close(ctx->devfd); + free(ctx); +} + +static void udmabuf_memcpy_to_device(struct memory_buffer *dst, size_t off, + void *src, int n) +{ + struct dma_buf_sync sync = {}; + + sync.flags = DMA_BUF_SYNC_START | DMA_BUF_SYNC_WRITE; + ioctl(dst->fd, DMA_BUF_IOCTL_SYNC, &sync); + + memcpy(dst->buf_mem + off, src, n); + + sync.flags = DMA_BUF_SYNC_END | DMA_BUF_SYNC_WRITE; + ioctl(dst->fd, DMA_BUF_IOCTL_SYNC, &sync); +} + +static void udmabuf_memcpy_from_device(void *dst, struct memory_buffer *src, + size_t off, int n) +{ + struct dma_buf_sync sync = {}; + + sync.flags = DMA_BUF_SYNC_START; + ioctl(src->fd, DMA_BUF_IOCTL_SYNC, &sync); + + memcpy(dst, src->buf_mem + off, n); + + sync.flags = DMA_BUF_SYNC_END; + ioctl(src->fd, DMA_BUF_IOCTL_SYNC, &sync); +} + +static struct memory_provider udmabuf_memory_provider = { + .alloc = udmabuf_alloc, + .free = udmabuf_free, + .memcpy_to_device = udmabuf_memcpy_to_device, + .memcpy_from_device = udmabuf_memcpy_from_device, +}; + +static struct memory_provider *provider = &udmabuf_memory_provider; + +static void print_nonzero_bytes(void *ptr, size_t size) +{ + unsigned char *p = ptr; + unsigned int i; + + for (i = 0; i < size; i++) + putchar(p[i]); +} + +void validate_buffer(void *line, size_t size) +{ + static unsigned char seed = 1; + unsigned char *ptr = line; + unsigned char expected; + static int errors; + size_t i; + + for (i = 0; i < size; i++) { + expected = seed ? seed : '\n'; + if (ptr[i] != expected) { + fprintf(stderr, + "Failed validation: expected=%u, actual=%u, index=%lu\n", + expected, ptr[i], i); + errors++; + if (errors > 20) + error(1, 0, "validation failed."); + } + seed++; + if (seed == do_validation) + seed = 0; + } + + fprintf(stdout, "Validated buffer\n"); +} + +static int rxq_num(int ifindex) +{ + struct ethtool_channels_get_req *req; + struct ethtool_channels_get_rsp *rsp; + struct ynl_error yerr; + struct ynl_sock *ys; + int num = -1; + + ys = ynl_sock_create(&ynl_ethtool_family, &yerr); + if (!ys) { + fprintf(stderr, "YNL: %s\n", yerr.msg); + return -1; + } + + req = ethtool_channels_get_req_alloc(); + ethtool_channels_get_req_set_header_dev_index(req, ifindex); + rsp = ethtool_channels_get(ys, req); + if (rsp) + num = rsp->rx_count + rsp->combined_count; + ethtool_channels_get_req_free(req); + ethtool_channels_get_rsp_free(rsp); + + ynl_sock_destroy(ys); + + return num; +} + +#define run_command(cmd, ...) \ + ({ \ + char command[256]; \ + memset(command, 0, sizeof(command)); \ + snprintf(command, sizeof(command), cmd, ##__VA_ARGS__); \ + fprintf(stderr, "Running: %s\n", command); \ + system(command); \ + }) + +static int reset_flow_steering(void) +{ + /* Depending on the NIC, toggling ntuple off and on might not + * be allowed. Additionally, attempting to delete existing filters + * will fail if no filters are present. Therefore, do not enforce + * the exit status. + */ + + run_command("sudo ethtool -K %s ntuple off >&2", ifname); + run_command("sudo ethtool -K %s ntuple on >&2", ifname); + run_command( + "sudo ethtool -n %s | grep 'Filter:' | awk '{print $2}' | xargs -n1 ethtool -N %s delete >&2", + ifname, ifname); + return 0; +} + +static const char *tcp_data_split_str(int val) +{ + switch (val) { + case 0: + return "off"; + case 1: + return "auto"; + case 2: + return "on"; + default: + return "?"; + } +} + +static int configure_headersplit(bool on) +{ + struct ethtool_rings_get_req *get_req; + struct ethtool_rings_get_rsp *get_rsp; + struct ethtool_rings_set_req *req; + struct ynl_error yerr; + struct ynl_sock *ys; + int ret; + + ys = ynl_sock_create(&ynl_ethtool_family, &yerr); + if (!ys) { + fprintf(stderr, "YNL: %s\n", yerr.msg); + return -1; + } + + req = ethtool_rings_set_req_alloc(); + ethtool_rings_set_req_set_header_dev_index(req, ifindex); + /* 0 - off, 1 - auto, 2 - on */ + ethtool_rings_set_req_set_tcp_data_split(req, on ? 2 : 0); + ret = ethtool_rings_set(ys, req); + if (ret < 0) + fprintf(stderr, "YNL failed: %s\n", ys->err.msg); + ethtool_rings_set_req_free(req); + + if (ret == 0) { + get_req = ethtool_rings_get_req_alloc(); + ethtool_rings_get_req_set_header_dev_index(get_req, ifindex); + get_rsp = ethtool_rings_get(ys, get_req); + ethtool_rings_get_req_free(get_req); + if (get_rsp) + fprintf(stderr, "TCP header split: %s\n", + tcp_data_split_str(get_rsp->tcp_data_split)); + ethtool_rings_get_rsp_free(get_rsp); + } + + ynl_sock_destroy(ys); + + return ret; +} + +static int configure_rss(void) +{ + return run_command("sudo ethtool -X %s equal %d >&2", ifname, start_queue); +} + +static int configure_channels(unsigned int rx, unsigned int tx) +{ + return run_command("sudo ethtool -L %s rx %u tx %u", ifname, rx, tx); +} + +static int configure_flow_steering(struct sockaddr_in6 *server_sin) +{ + const char *type = "tcp6"; + const char *server_addr; + char buf[40]; + + inet_ntop(AF_INET6, &server_sin->sin6_addr, buf, sizeof(buf)); + server_addr = buf; + + if (IN6_IS_ADDR_V4MAPPED(&server_sin->sin6_addr)) { + type = "tcp4"; + server_addr = strrchr(server_addr, ':') + 1; + } + + /* Try configure 5-tuple */ + if (run_command("sudo ethtool -N %s flow-type %s %s %s dst-ip %s %s %s dst-port %s queue %d >&2", + ifname, + type, + client_ip ? "src-ip" : "", + client_ip ?: "", + server_addr, + client_ip ? "src-port" : "", + client_ip ? port : "", + port, start_queue)) + /* If that fails, try configure 3-tuple */ + if (run_command("sudo ethtool -N %s flow-type %s dst-ip %s dst-port %s queue %d >&2", + ifname, + type, + server_addr, + port, start_queue)) + /* If that fails, return error */ + return -1; + + return 0; +} + +static int bind_rx_queue(unsigned int ifindex, unsigned int dmabuf_fd, + struct netdev_queue_id *queues, + unsigned int n_queue_index, struct ynl_sock **ys) +{ + struct netdev_bind_rx_req *req = NULL; + struct netdev_bind_rx_rsp *rsp = NULL; + struct ynl_error yerr; + + *ys = ynl_sock_create(&ynl_netdev_family, &yerr); + if (!*ys) { + fprintf(stderr, "YNL: %s\n", yerr.msg); + return -1; + } + + req = netdev_bind_rx_req_alloc(); + netdev_bind_rx_req_set_ifindex(req, ifindex); + netdev_bind_rx_req_set_fd(req, dmabuf_fd); + __netdev_bind_rx_req_set_queues(req, queues, n_queue_index); + + rsp = netdev_bind_rx(*ys, req); + if (!rsp) { + perror("netdev_bind_rx"); + goto err_close; + } + + if (!rsp->_present.id) { + perror("id not present"); + goto err_close; + } + + fprintf(stderr, "got dmabuf id=%d\n", rsp->id); + dmabuf_id = rsp->id; + + netdev_bind_rx_req_free(req); + netdev_bind_rx_rsp_free(rsp); + + return 0; + +err_close: + fprintf(stderr, "YNL failed: %s\n", (*ys)->err.msg); + netdev_bind_rx_req_free(req); + ynl_sock_destroy(*ys); + return -1; +} + +static int bind_tx_queue(unsigned int ifindex, unsigned int dmabuf_fd, + struct ynl_sock **ys) +{ + struct netdev_bind_tx_req *req = NULL; + struct netdev_bind_tx_rsp *rsp = NULL; + struct ynl_error yerr; + + *ys = ynl_sock_create(&ynl_netdev_family, &yerr); + if (!*ys) { + fprintf(stderr, "YNL: %s\n", yerr.msg); + return -1; + } + + req = netdev_bind_tx_req_alloc(); + netdev_bind_tx_req_set_ifindex(req, ifindex); + netdev_bind_tx_req_set_fd(req, dmabuf_fd); + + rsp = netdev_bind_tx(*ys, req); + if (!rsp) { + perror("netdev_bind_tx"); + goto err_close; + } + + if (!rsp->_present.id) { + perror("id not present"); + goto err_close; + } + + fprintf(stderr, "got tx dmabuf id=%d\n", rsp->id); + tx_dmabuf_id = rsp->id; + + netdev_bind_tx_req_free(req); + netdev_bind_tx_rsp_free(rsp); + + return 0; + +err_close: + fprintf(stderr, "YNL failed: %s\n", (*ys)->err.msg); + netdev_bind_tx_req_free(req); + ynl_sock_destroy(*ys); + return -1; +} + +static void enable_reuseaddr(int fd) +{ + int opt = 1; + int ret; + + ret = setsockopt(fd, SOL_SOCKET, SO_REUSEPORT, &opt, sizeof(opt)); + if (ret) + error(1, errno, "%s: [FAIL, SO_REUSEPORT]\n", TEST_PREFIX); + + ret = setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &opt, sizeof(opt)); + if (ret) + error(1, errno, "%s: [FAIL, SO_REUSEADDR]\n", TEST_PREFIX); +} + +static int parse_address(const char *str, int port, struct sockaddr_in6 *sin6) +{ + int ret; + + sin6->sin6_family = AF_INET6; + sin6->sin6_port = htons(port); + + ret = inet_pton(sin6->sin6_family, str, &sin6->sin6_addr); + if (ret != 1) { + /* fallback to plain IPv4 */ + ret = inet_pton(AF_INET, str, &sin6->sin6_addr.s6_addr32[3]); + if (ret != 1) + return -1; + + /* add ::ffff prefix */ + sin6->sin6_addr.s6_addr32[0] = 0; + sin6->sin6_addr.s6_addr32[1] = 0; + sin6->sin6_addr.s6_addr16[4] = 0; + sin6->sin6_addr.s6_addr16[5] = 0xffff; + } + + return 0; +} + +static struct netdev_queue_id *create_queues(void) +{ + struct netdev_queue_id *queues; + size_t i = 0; + + queues = calloc(num_queues, sizeof(*queues)); + for (i = 0; i < num_queues; i++) { + queues[i]._present.type = 1; + queues[i]._present.id = 1; + queues[i].type = NETDEV_QUEUE_TYPE_RX; + queues[i].id = start_queue + i; + } + + return queues; +} + +static int do_server(struct memory_buffer *mem) +{ + char ctrl_data[sizeof(int) * 20000]; + size_t non_page_aligned_frags = 0; + struct sockaddr_in6 client_addr; + struct sockaddr_in6 server_sin; + size_t page_aligned_frags = 0; + size_t total_received = 0; + socklen_t client_addr_len; + bool is_devmem = false; + char *tmp_mem = NULL; + struct ynl_sock *ys; + char iobuf[819200]; + char buffer[256]; + int socket_fd; + int client_fd; + int ret; + + ret = parse_address(server_ip, atoi(port), &server_sin); + if (ret < 0) + error(1, 0, "parse server address"); + + if (reset_flow_steering()) + error(1, 0, "Failed to reset flow steering\n"); + + if (configure_headersplit(1)) + error(1, 0, "Failed to enable TCP header split\n"); + + /* Configure RSS to divert all traffic from our devmem queues */ + if (configure_rss()) + error(1, 0, "Failed to configure rss\n"); + + /* Flow steer our devmem flows to start_queue */ + if (configure_flow_steering(&server_sin)) + error(1, 0, "Failed to configure flow steering\n"); + + sleep(1); + + if (bind_rx_queue(ifindex, mem->fd, create_queues(), num_queues, &ys)) + error(1, 0, "Failed to bind\n"); + + tmp_mem = malloc(mem->size); + if (!tmp_mem) + error(1, ENOMEM, "malloc failed"); + + socket_fd = socket(AF_INET6, SOCK_STREAM, 0); + if (socket_fd < 0) + error(1, errno, "%s: [FAIL, create socket]\n", TEST_PREFIX); + + enable_reuseaddr(socket_fd); + + fprintf(stderr, "binding to address %s:%d\n", server_ip, + ntohs(server_sin.sin6_port)); + + ret = bind(socket_fd, &server_sin, sizeof(server_sin)); + if (ret) + error(1, errno, "%s: [FAIL, bind]\n", TEST_PREFIX); + + ret = listen(socket_fd, 1); + if (ret) + error(1, errno, "%s: [FAIL, listen]\n", TEST_PREFIX); + + client_addr_len = sizeof(client_addr); + + inet_ntop(AF_INET6, &server_sin.sin6_addr, buffer, + sizeof(buffer)); + fprintf(stderr, "Waiting or connection on %s:%d\n", buffer, + ntohs(server_sin.sin6_port)); + client_fd = accept(socket_fd, &client_addr, &client_addr_len); + + inet_ntop(AF_INET6, &client_addr.sin6_addr, buffer, + sizeof(buffer)); + fprintf(stderr, "Got connection from %s:%d\n", buffer, + ntohs(client_addr.sin6_port)); + + while (1) { + struct iovec iov = { .iov_base = iobuf, + .iov_len = sizeof(iobuf) }; + struct dmabuf_cmsg *dmabuf_cmsg = NULL; + struct cmsghdr *cm = NULL; + struct msghdr msg = { 0 }; + struct dmabuf_token token; + ssize_t ret; + + is_devmem = false; + + msg.msg_iov = &iov; + msg.msg_iovlen = 1; + msg.msg_control = ctrl_data; + msg.msg_controllen = sizeof(ctrl_data); + ret = recvmsg(client_fd, &msg, MSG_SOCK_DEVMEM); + fprintf(stderr, "recvmsg ret=%ld\n", ret); + if (ret < 0 && (errno == EAGAIN || errno == EWOULDBLOCK)) + continue; + if (ret < 0) { + perror("recvmsg"); + continue; + } + if (ret == 0) { + fprintf(stderr, "client exited\n"); + goto cleanup; + } + + for (cm = CMSG_FIRSTHDR(&msg); cm; cm = CMSG_NXTHDR(&msg, cm)) { + if (cm->cmsg_level != SOL_SOCKET || + (cm->cmsg_type != SCM_DEVMEM_DMABUF && + cm->cmsg_type != SCM_DEVMEM_LINEAR)) { + fprintf(stderr, "skipping non-devmem cmsg\n"); + continue; + } + + dmabuf_cmsg = (struct dmabuf_cmsg *)CMSG_DATA(cm); + is_devmem = true; + + if (cm->cmsg_type == SCM_DEVMEM_LINEAR) { + /* TODO: process data copied from skb's linear + * buffer. + */ + fprintf(stderr, + "SCM_DEVMEM_LINEAR. dmabuf_cmsg->frag_size=%u\n", + dmabuf_cmsg->frag_size); + + continue; + } + + token.token_start = dmabuf_cmsg->frag_token; + token.token_count = 1; + + total_received += dmabuf_cmsg->frag_size; + fprintf(stderr, + "received frag_page=%llu, in_page_offset=%llu, frag_offset=%llu, frag_size=%u, token=%u, total_received=%lu, dmabuf_id=%u\n", + dmabuf_cmsg->frag_offset >> PAGE_SHIFT, + dmabuf_cmsg->frag_offset % getpagesize(), + dmabuf_cmsg->frag_offset, + dmabuf_cmsg->frag_size, dmabuf_cmsg->frag_token, + total_received, dmabuf_cmsg->dmabuf_id); + + if (dmabuf_cmsg->dmabuf_id != dmabuf_id) + error(1, 0, + "received on wrong dmabuf_id: flow steering error\n"); + + if (dmabuf_cmsg->frag_size % getpagesize()) + non_page_aligned_frags++; + else + page_aligned_frags++; + + provider->memcpy_from_device(tmp_mem, mem, + dmabuf_cmsg->frag_offset, + dmabuf_cmsg->frag_size); + + if (do_validation) + validate_buffer(tmp_mem, + dmabuf_cmsg->frag_size); + else + print_nonzero_bytes(tmp_mem, + dmabuf_cmsg->frag_size); + + ret = setsockopt(client_fd, SOL_SOCKET, + SO_DEVMEM_DONTNEED, &token, + sizeof(token)); + if (ret != 1) + error(1, 0, + "SO_DEVMEM_DONTNEED not enough tokens"); + } + if (!is_devmem) + error(1, 0, "flow steering error\n"); + + fprintf(stderr, "total_received=%lu\n", total_received); + } + + fprintf(stderr, "%s: ok\n", TEST_PREFIX); + + fprintf(stderr, "page_aligned_frags=%lu, non_page_aligned_frags=%lu\n", + page_aligned_frags, non_page_aligned_frags); + +cleanup: + + free(tmp_mem); + close(client_fd); + close(socket_fd); + ynl_sock_destroy(ys); + + return 0; +} + +void run_devmem_tests(void) +{ + struct memory_buffer *mem; + struct ynl_sock *ys; + + mem = provider->alloc(getpagesize() * NUM_PAGES); + + /* Configure RSS to divert all traffic from our devmem queues */ + if (configure_rss()) + error(1, 0, "rss error\n"); + + if (configure_headersplit(1)) + error(1, 0, "Failed to configure header split\n"); + + if (!bind_rx_queue(ifindex, mem->fd, + calloc(num_queues, sizeof(struct netdev_queue_id)), + num_queues, &ys)) + error(1, 0, "Binding empty queues array should have failed\n"); + + if (configure_headersplit(0)) + error(1, 0, "Failed to configure header split\n"); + + if (!bind_rx_queue(ifindex, mem->fd, create_queues(), num_queues, &ys)) + error(1, 0, "Configure dmabuf with header split off should have failed\n"); + + if (configure_headersplit(1)) + error(1, 0, "Failed to configure header split\n"); + + if (bind_rx_queue(ifindex, mem->fd, create_queues(), num_queues, &ys)) + error(1, 0, "Failed to bind\n"); + + /* Deactivating a bound queue should not be legal */ + if (!configure_channels(num_queues, num_queues - 1)) + error(1, 0, "Deactivating a bound queue should be illegal.\n"); + + /* Closing the netlink socket does an implicit unbind */ + ynl_sock_destroy(ys); + + provider->free(mem); +} + +static uint64_t gettimeofday_ms(void) +{ + struct timeval tv; + + gettimeofday(&tv, NULL); + return (tv.tv_sec * 1000ULL) + (tv.tv_usec / 1000ULL); +} + +static int do_poll(int fd) +{ + struct pollfd pfd; + int ret; + + pfd.revents = 0; + pfd.fd = fd; + + ret = poll(&pfd, 1, waittime_ms); + if (ret == -1) + error(1, errno, "poll"); + + return ret && (pfd.revents & POLLERR); +} + +static void wait_compl(int fd) +{ + int64_t tstop = gettimeofday_ms() + waittime_ms; + char control[CMSG_SPACE(100)] = {}; + struct sock_extended_err *serr; + struct msghdr msg = {}; + struct cmsghdr *cm; + __u32 hi, lo; + int ret; + + msg.msg_control = control; + msg.msg_controllen = sizeof(control); + + while (gettimeofday_ms() < tstop) { + if (!do_poll(fd)) + continue; + + ret = recvmsg(fd, &msg, MSG_ERRQUEUE); + if (ret < 0) { + if (errno == EAGAIN) + continue; + error(1, errno, "recvmsg(MSG_ERRQUEUE)"); + return; + } + if (msg.msg_flags & MSG_CTRUNC) + error(1, 0, "MSG_CTRUNC\n"); + + for (cm = CMSG_FIRSTHDR(&msg); cm; cm = CMSG_NXTHDR(&msg, cm)) { + if (cm->cmsg_level != SOL_IP && + cm->cmsg_level != SOL_IPV6) + continue; + if (cm->cmsg_level == SOL_IP && + cm->cmsg_type != IP_RECVERR) + continue; + if (cm->cmsg_level == SOL_IPV6 && + cm->cmsg_type != IPV6_RECVERR) + continue; + + serr = (void *)CMSG_DATA(cm); + if (serr->ee_origin != SO_EE_ORIGIN_ZEROCOPY) + error(1, 0, "wrong origin %u", serr->ee_origin); + if (serr->ee_errno != 0) + error(1, 0, "wrong errno %d", serr->ee_errno); + + hi = serr->ee_data; + lo = serr->ee_info; + + fprintf(stderr, "tx complete [%d,%d]\n", lo, hi); + return; + } + } + + error(1, 0, "did not receive tx completion"); +} + +static int do_client(struct memory_buffer *mem) +{ + char ctrl_data[CMSG_SPACE(sizeof(__u32))]; + struct sockaddr_in6 server_sin; + struct sockaddr_in6 client_sin; + struct ynl_sock *ys = NULL; + struct iovec iov[MAX_IOV]; + struct msghdr msg = {}; + ssize_t line_size = 0; + struct cmsghdr *cmsg; + char *line = NULL; + unsigned long mid; + size_t len = 0; + int socket_fd; + __u32 ddmabuf; + int opt = 1; + int ret; + + ret = parse_address(server_ip, atoi(port), &server_sin); + if (ret < 0) + error(1, 0, "parse server address"); + + socket_fd = socket(AF_INET6, SOCK_STREAM, 0); + if (socket_fd < 0) + error(1, socket_fd, "create socket"); + + enable_reuseaddr(socket_fd); + + ret = setsockopt(socket_fd, SOL_SOCKET, SO_BINDTODEVICE, ifname, + strlen(ifname) + 1); + if (ret) + error(1, errno, "bindtodevice"); + + if (bind_tx_queue(ifindex, mem->fd, &ys)) + error(1, 0, "Failed to bind\n"); + + if (client_ip) { + ret = parse_address(client_ip, atoi(port), &client_sin); + if (ret < 0) + error(1, 0, "parse client address"); + + ret = bind(socket_fd, &client_sin, sizeof(client_sin)); + if (ret) + error(1, errno, "bind"); + } + + ret = setsockopt(socket_fd, SOL_SOCKET, SO_ZEROCOPY, &opt, sizeof(opt)); + if (ret) + error(1, errno, "set sock opt"); + + fprintf(stderr, "Connect to %s %d (via %s)\n", server_ip, + ntohs(server_sin.sin6_port), ifname); + + ret = connect(socket_fd, &server_sin, sizeof(server_sin)); + if (ret) + error(1, errno, "connect"); + + while (1) { + free(line); + line = NULL; + line_size = getline(&line, &len, stdin); + + if (line_size < 0) + break; + + if (max_chunk) { + msg.msg_iovlen = + (line_size + max_chunk - 1) / max_chunk; + if (msg.msg_iovlen > MAX_IOV) + error(1, 0, + "can't partition %zd bytes into maximum of %d chunks", + line_size, MAX_IOV); + + for (int i = 0; i < msg.msg_iovlen; i++) { + iov[i].iov_base = (void *)(i * max_chunk); + iov[i].iov_len = max_chunk; + } + + iov[msg.msg_iovlen - 1].iov_len = + line_size - (msg.msg_iovlen - 1) * max_chunk; + } else { + iov[0].iov_base = 0; + iov[0].iov_len = line_size; + msg.msg_iovlen = 1; + } + + msg.msg_iov = iov; + provider->memcpy_to_device(mem, 0, line, line_size); + + msg.msg_control = ctrl_data; + msg.msg_controllen = sizeof(ctrl_data); + + cmsg = CMSG_FIRSTHDR(&msg); + cmsg->cmsg_level = SOL_SOCKET; + cmsg->cmsg_type = SCM_DEVMEM_DMABUF; + cmsg->cmsg_len = CMSG_LEN(sizeof(__u32)); + + ddmabuf = tx_dmabuf_id; + + *((__u32 *)CMSG_DATA(cmsg)) = ddmabuf; + + ret = sendmsg(socket_fd, &msg, MSG_ZEROCOPY); + if (ret < 0) + error(1, errno, "Failed sendmsg"); + + fprintf(stderr, "sendmsg_ret=%d\n", ret); + + if (ret != line_size) + error(1, errno, "Did not send all bytes %d vs %zd", ret, + line_size); + + wait_compl(socket_fd); + } + + fprintf(stderr, "%s: tx ok\n", TEST_PREFIX); + + free(line); + close(socket_fd); + + if (ys) + ynl_sock_destroy(ys); + + return 0; +} + +int main(int argc, char *argv[]) +{ + struct memory_buffer *mem; + int is_server = 0, opt; + int ret; + + while ((opt = getopt(argc, argv, "ls:c:p:v:q:t:f:z:")) != -1) { + switch (opt) { + case 'l': + is_server = 1; + break; + case 's': + server_ip = optarg; + break; + case 'c': + client_ip = optarg; + break; + case 'p': + port = optarg; + break; + case 'v': + do_validation = atoll(optarg); + break; + case 'q': + num_queues = atoi(optarg); + break; + case 't': + start_queue = atoi(optarg); + break; + case 'f': + ifname = optarg; + break; + case 'z': + max_chunk = atoi(optarg); + break; + case '?': + fprintf(stderr, "unknown option: %c\n", optopt); + break; + } + } + + if (!ifname) + error(1, 0, "Missing -f argument\n"); + + ifindex = if_nametoindex(ifname); + + fprintf(stderr, "using ifindex=%u\n", ifindex); + + if (!server_ip && !client_ip) { + if (start_queue < 0 && num_queues < 0) { + num_queues = rxq_num(ifindex); + if (num_queues < 0) + error(1, 0, "couldn't detect number of queues\n"); + if (num_queues < 2) + error(1, 0, + "number of device queues is too low\n"); + /* make sure can bind to multiple queues */ + start_queue = num_queues / 2; + num_queues /= 2; + } + + if (start_queue < 0 || num_queues < 0) + error(1, 0, "Both -t and -q are required\n"); + + run_devmem_tests(); + return 0; + } + + if (start_queue < 0 && num_queues < 0) { + num_queues = rxq_num(ifindex); + if (num_queues < 2) + error(1, 0, "number of device queues is too low\n"); + + num_queues = 1; + start_queue = rxq_num(ifindex) - num_queues; + + if (start_queue < 0) + error(1, 0, "couldn't detect number of queues\n"); + + fprintf(stderr, "using queues %d..%d\n", start_queue, start_queue + num_queues); + } + + for (; optind < argc; optind++) + fprintf(stderr, "extra arguments: %s\n", argv[optind]); + + if (start_queue < 0) + error(1, 0, "Missing -t argument\n"); + + if (num_queues < 0) + error(1, 0, "Missing -q argument\n"); + + if (!server_ip) + error(1, 0, "Missing -s argument\n"); + + if (!port) + error(1, 0, "Missing -p argument\n"); + + mem = provider->alloc(getpagesize() * NUM_PAGES); + ret = is_server ? do_server(mem) : do_client(mem); + provider->free(mem); + + return ret; +} diff --git a/tools/testing/selftests/drivers/net/hw/pp_alloc_fail.py b/tools/testing/selftests/drivers/net/hw/pp_alloc_fail.py new file mode 100755 index 000000000000..ad192fef3117 --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/pp_alloc_fail.py @@ -0,0 +1,130 @@ +#!/usr/bin/env python3 +# SPDX-License-Identifier: GPL-2.0 + +import errno +import time +import os +from lib.py import ksft_run, ksft_exit, ksft_pr +from lib.py import KsftSkipEx, KsftFailEx +from lib.py import NetdevFamily, NlError +from lib.py import NetDrvEpEnv +from lib.py import cmd, tool, GenerateTraffic + + +def _write_fail_config(config): + for key, value in config.items(): + with open("/sys/kernel/debug/fail_function/" + key, "w") as fp: + fp.write(str(value) + "\n") + + +def _enable_pp_allocation_fail(): + if not os.path.exists("/sys/kernel/debug/fail_function"): + raise KsftSkipEx("Kernel built without function error injection (or DebugFS)") + + if not os.path.exists("/sys/kernel/debug/fail_function/page_pool_alloc_netmems"): + with open("/sys/kernel/debug/fail_function/inject", "w") as fp: + fp.write("page_pool_alloc_netmems\n") + + _write_fail_config({ + "verbose": 0, + "interval": 511, + "probability": 100, + "times": -1, + }) + + +def _disable_pp_allocation_fail(): + if not os.path.exists("/sys/kernel/debug/fail_function"): + return + + if os.path.exists("/sys/kernel/debug/fail_function/page_pool_alloc_netmems"): + with open("/sys/kernel/debug/fail_function/inject", "w") as fp: + fp.write("\n") + + _write_fail_config({ + "probability": 0, + "times": 0, + }) + + +def test_pp_alloc(cfg, netdevnl): + def get_stats(): + return netdevnl.qstats_get({"ifindex": cfg.ifindex}, dump=True)[0] + + def check_traffic_flowing(): + stat1 = get_stats() + time.sleep(1) + stat2 = get_stats() + if stat2['rx-packets'] - stat1['rx-packets'] < 15000: + raise KsftFailEx("Traffic seems low:", stat2['rx-packets'] - stat1['rx-packets']) + + + try: + stats = get_stats() + except NlError as e: + if e.nl_msg.error == -errno.EOPNOTSUPP: + stats = {} + else: + raise + if 'rx-alloc-fail' not in stats: + raise KsftSkipEx("Driver does not report 'rx-alloc-fail' via qstats") + + set_g = False + traffic = None + try: + traffic = GenerateTraffic(cfg) + + check_traffic_flowing() + + _enable_pp_allocation_fail() + + s1 = get_stats() + time.sleep(3) + s2 = get_stats() + + if s2['rx-alloc-fail'] - s1['rx-alloc-fail'] < 1: + raise KsftSkipEx("Allocation failures not increasing") + if s2['rx-alloc-fail'] - s1['rx-alloc-fail'] < 100: + raise KsftSkipEx("Allocation increasing too slowly", s2['rx-alloc-fail'] - s1['rx-alloc-fail'], + "packets:", s2['rx-packets'] - s1['rx-packets']) + + # Basic failures are fine, try to wobble some settings to catch extra failures + check_traffic_flowing() + g = tool("ethtool", "-g " + cfg.ifname, json=True)[0] + if 'rx' in g and g["rx"] * 2 <= g["rx-max"]: + new_g = g['rx'] * 2 + elif 'rx' in g: + new_g = g['rx'] // 2 + else: + new_g = None + + if new_g: + set_g = cmd(f"ethtool -G {cfg.ifname} rx {new_g}", fail=False).ret == 0 + if set_g: + ksft_pr("ethtool -G change retval: success") + else: + ksft_pr("ethtool -G change retval: did not succeed", new_g) + else: + ksft_pr("ethtool -G change retval: did not try") + + time.sleep(0.1) + check_traffic_flowing() + finally: + _disable_pp_allocation_fail() + if traffic: + traffic.stop() + time.sleep(0.1) + if set_g: + cmd(f"ethtool -G {cfg.ifname} rx {g['rx']}") + + +def main() -> None: + netdevnl = NetdevFamily() + with NetDrvEpEnv(__file__, nsim_test=False) as cfg: + + ksft_run([test_pp_alloc], args=(cfg, netdevnl, )) + ksft_exit() + + +if __name__ == "__main__": + main() diff --git a/tools/testing/selftests/drivers/net/hw/rss_ctx.py b/tools/testing/selftests/drivers/net/hw/rss_ctx.py new file mode 100755 index 000000000000..ca60ae325c22 --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/rss_ctx.py @@ -0,0 +1,769 @@ +#!/usr/bin/env python3 +# SPDX-License-Identifier: GPL-2.0 + +import datetime +import random +import re +from lib.py import ksft_run, ksft_pr, ksft_exit +from lib.py import ksft_eq, ksft_ne, ksft_ge, ksft_in, ksft_lt, ksft_true, ksft_raises +from lib.py import NetDrvEpEnv +from lib.py import EthtoolFamily, NetdevFamily +from lib.py import KsftSkipEx, KsftFailEx +from lib.py import rand_port +from lib.py import ethtool, ip, defer, GenerateTraffic, CmdExitFailure + + +def _rss_key_str(key): + return ":".join(["{:02x}".format(x) for x in key]) + + +def _rss_key_rand(length): + return [random.randint(0, 255) for _ in range(length)] + + +def _rss_key_check(cfg, data=None, context=0): + if data is None: + data = get_rss(cfg, context=context) + if 'rss-hash-key' not in data: + return + non_zero = [x for x in data['rss-hash-key'] if x != 0] + ksft_eq(bool(non_zero), True, comment=f"RSS key is all zero {data['rss-hash-key']}") + + +def get_rss(cfg, context=0): + return ethtool(f"-x {cfg.ifname} context {context}", json=True)[0] + + +def get_drop_err_sum(cfg): + stats = ip("-s -s link show dev " + cfg.ifname, json=True)[0] + cnt = 0 + for key in ['errors', 'dropped', 'over_errors', 'fifo_errors', + 'length_errors', 'crc_errors', 'missed_errors', + 'frame_errors']: + cnt += stats["stats64"]["rx"][key] + return cnt, stats["stats64"]["tx"]["carrier_changes"] + + +def ethtool_create(cfg, act, opts): + output = ethtool(f"{act} {cfg.ifname} {opts}").stdout + # Output will be something like: "New RSS context is 1" or + # "Added rule with ID 7", we want the integer from the end + return int(output.split()[-1]) + + +def require_ntuple(cfg): + features = ethtool(f"-k {cfg.ifname}", json=True)[0] + if not features["ntuple-filters"]["active"]: + # ntuple is more of a capability than a config knob, don't bother + # trying to enable it (until some driver actually needs it). + raise KsftSkipEx("Ntuple filters not enabled on the device: " + str(features["ntuple-filters"])) + + +def require_context_cnt(cfg, need_cnt): + # There's no good API to get the context count, so the tests + # which try to add a lot opportunisitically set the count they + # discovered. Careful with test ordering! + if need_cnt and cfg.context_cnt and cfg.context_cnt < need_cnt: + raise KsftSkipEx(f"Test requires at least {need_cnt} contexts, but device only has {cfg.context_cnt}") + + +# Get Rx packet counts for all queues, as a simple list of integers +# if @prev is specified the prev counts will be subtracted +def _get_rx_cnts(cfg, prev=None): + cfg.wait_hw_stats_settle() + data = cfg.netdevnl.qstats_get({"ifindex": cfg.ifindex, "scope": ["queue"]}, dump=True) + data = [x for x in data if x['queue-type'] == "rx"] + max_q = max([x["queue-id"] for x in data]) + queue_stats = [0] * (max_q + 1) + for q in data: + queue_stats[q["queue-id"]] = q["rx-packets"] + if prev and q["queue-id"] < len(prev): + queue_stats[q["queue-id"]] -= prev[q["queue-id"]] + return queue_stats + + +def _send_traffic_check(cfg, port, name, params): + # params is a dict with 3 possible keys: + # - "target": required, which queues we expect to get iperf traffic + # - "empty": optional, which queues should see no traffic at all + # - "noise": optional, which queues we expect to see low traffic; + # used for queues of the main context, since some background + # OS activity may use those queues while we're testing + # the value for each is a list, or some other iterable containing queue ids. + + cnts = _get_rx_cnts(cfg) + GenerateTraffic(cfg, port=port).wait_pkts_and_stop(20000) + cnts = _get_rx_cnts(cfg, prev=cnts) + + directed = sum(cnts[i] for i in params['target']) + + ksft_ge(directed, 20000, f"traffic on {name}: " + str(cnts)) + if params.get('noise'): + ksft_lt(sum(cnts[i] for i in params['noise']), directed / 2, + f"traffic on other queues ({name})':" + str(cnts)) + if params.get('empty'): + ksft_eq(sum(cnts[i] for i in params['empty']), 0, + f"traffic on inactive queues ({name}): " + str(cnts)) + + +def _ntuple_rule_check(cfg, rule_id, ctx_id): + """Check that ntuple rule references RSS context ID""" + text = ethtool(f"-n {cfg.ifname} rule {rule_id}").stdout + pattern = f"RSS Context (ID: )?{ctx_id}" + ksft_true(re.search(pattern, text), "RSS context not referenced in ntuple rule") + + +def test_rss_key_indir(cfg): + """Test basics like updating the main RSS key and indirection table.""" + + qcnt = len(_get_rx_cnts(cfg)) + if qcnt < 3: + KsftSkipEx("Device has fewer than 3 queues (or doesn't support queue stats)") + + data = get_rss(cfg) + want_keys = ['rss-hash-key', 'rss-hash-function', 'rss-indirection-table'] + for k in want_keys: + if k not in data: + raise KsftFailEx("ethtool results missing key: " + k) + if not data[k]: + raise KsftFailEx(f"ethtool results empty for '{k}': {data[k]}") + + _rss_key_check(cfg, data=data) + key_len = len(data['rss-hash-key']) + + # Set the key + key = _rss_key_rand(key_len) + ethtool(f"-X {cfg.ifname} hkey " + _rss_key_str(key)) + + data = get_rss(cfg) + ksft_eq(key, data['rss-hash-key']) + + # Set the indirection table and the key together + key = _rss_key_rand(key_len) + ethtool(f"-X {cfg.ifname} equal 3 hkey " + _rss_key_str(key)) + reset_indir = defer(ethtool, f"-X {cfg.ifname} default") + + data = get_rss(cfg) + _rss_key_check(cfg, data=data) + ksft_eq(0, min(data['rss-indirection-table'])) + ksft_eq(2, max(data['rss-indirection-table'])) + + # Reset indirection table and set the key + key = _rss_key_rand(key_len) + ethtool(f"-X {cfg.ifname} default hkey " + _rss_key_str(key)) + data = get_rss(cfg) + _rss_key_check(cfg, data=data) + ksft_eq(0, min(data['rss-indirection-table'])) + ksft_eq(qcnt - 1, max(data['rss-indirection-table'])) + + # Set the indirection table + ethtool(f"-X {cfg.ifname} equal 2") + data = get_rss(cfg) + ksft_eq(0, min(data['rss-indirection-table'])) + ksft_eq(1, max(data['rss-indirection-table'])) + + # Check we only get traffic on the first 2 queues + cnts = _get_rx_cnts(cfg) + GenerateTraffic(cfg).wait_pkts_and_stop(20000) + cnts = _get_rx_cnts(cfg, prev=cnts) + # 2 queues, 20k packets, must be at least 5k per queue + ksft_ge(cnts[0], 5000, "traffic on main context (1/2): " + str(cnts)) + ksft_ge(cnts[1], 5000, "traffic on main context (2/2): " + str(cnts)) + # The other queues should be unused + ksft_eq(sum(cnts[2:]), 0, "traffic on unused queues: " + str(cnts)) + + # Restore, and check traffic gets spread again + reset_indir.exec() + + cnts = _get_rx_cnts(cfg) + GenerateTraffic(cfg).wait_pkts_and_stop(20000) + cnts = _get_rx_cnts(cfg, prev=cnts) + # First two queues get less traffic than all the rest + ksft_lt(sum(cnts[:2]), sum(cnts[2:]), "traffic distributed: " + str(cnts)) + + +def test_rss_queue_reconfigure(cfg, main_ctx=True): + """Make sure queue changes can't override requested RSS config. + + By default main RSS table should change to include all queues. + When user sets a specific RSS config the driver should preserve it, + even when queue count changes. Driver should refuse to deactivate + queues used in the user-set RSS config. + """ + + if not main_ctx: + require_ntuple(cfg) + + # Start with 4 queues, an arbitrary known number. + try: + qcnt = len(_get_rx_cnts(cfg)) + ethtool(f"-L {cfg.ifname} combined 4") + defer(ethtool, f"-L {cfg.ifname} combined {qcnt}") + except: + raise KsftSkipEx("Not enough queues for the test or qstat not supported") + + if main_ctx: + ctx_id = 0 + ctx_ref = "" + else: + ctx_id = ethtool_create(cfg, "-X", "context new") + ctx_ref = f"context {ctx_id}" + defer(ethtool, f"-X {cfg.ifname} {ctx_ref} delete") + + # Indirection table should be distributing to all queues. + data = get_rss(cfg, context=ctx_id) + ksft_eq(0, min(data['rss-indirection-table'])) + ksft_eq(3, max(data['rss-indirection-table'])) + + # Increase queues, indirection table should be distributing to all queues. + # It's unclear whether tables of additional contexts should be reset, too. + if main_ctx: + ethtool(f"-L {cfg.ifname} combined 5") + data = get_rss(cfg) + ksft_eq(0, min(data['rss-indirection-table'])) + ksft_eq(4, max(data['rss-indirection-table'])) + ethtool(f"-L {cfg.ifname} combined 4") + + # Configure the table explicitly + port = rand_port() + ethtool(f"-X {cfg.ifname} {ctx_ref} weight 1 0 0 1") + if main_ctx: + other_key = 'empty' + defer(ethtool, f"-X {cfg.ifname} default") + else: + other_key = 'noise' + flow = f"flow-type tcp{cfg.addr_ipver} dst-ip {cfg.addr} dst-port {port} context {ctx_id}" + ntuple = ethtool_create(cfg, "-N", flow) + defer(ethtool, f"-N {cfg.ifname} delete {ntuple}") + + _send_traffic_check(cfg, port, ctx_ref, { 'target': (0, 3), + other_key: (1, 2) }) + + # We should be able to increase queues, but table should be left untouched + ethtool(f"-L {cfg.ifname} combined 5") + data = get_rss(cfg, context=ctx_id) + ksft_eq({0, 3}, set(data['rss-indirection-table'])) + + _send_traffic_check(cfg, port, ctx_ref, { 'target': (0, 3), + other_key: (1, 2, 4) }) + + # Setting queue count to 3 should fail, queue 3 is used + try: + ethtool(f"-L {cfg.ifname} combined 3") + except CmdExitFailure: + pass + else: + raise Exception(f"Driver didn't prevent us from deactivating a used queue (context {ctx_id})") + + if not main_ctx: + ethtool(f"-L {cfg.ifname} combined 4") + flow = f"flow-type tcp{cfg.addr_ipver} dst-ip {cfg.addr} dst-port {port} context {ctx_id} action 1" + try: + # this targets queue 4, which doesn't exist + ntuple2 = ethtool_create(cfg, "-N", flow) + defer(ethtool, f"-N {cfg.ifname} delete {ntuple2}") + except CmdExitFailure: + pass + else: + raise Exception(f"Driver didn't prevent us from targeting a nonexistent queue (context {ctx_id})") + # change the table to target queues 0 and 2 + ethtool(f"-X {cfg.ifname} {ctx_ref} weight 1 0 1 0") + # ntuple rule therefore targets queues 1 and 3 + try: + ntuple2 = ethtool_create(cfg, "-N", flow) + except CmdExitFailure: + ksft_pr("Driver does not support rss + queue offset") + return + + defer(ethtool, f"-N {cfg.ifname} delete {ntuple2}") + # should replace existing filter + ksft_eq(ntuple, ntuple2) + _send_traffic_check(cfg, port, ctx_ref, { 'target': (1, 3), + 'noise' : (0, 2) }) + # Setting queue count to 3 should fail, queue 3 is used + try: + ethtool(f"-L {cfg.ifname} combined 3") + except CmdExitFailure: + pass + else: + raise Exception(f"Driver didn't prevent us from deactivating a used queue (context {ctx_id})") + + +def test_rss_resize(cfg): + """Test resizing of the RSS table. + + Some devices dynamically increase and decrease the size of the RSS + indirection table based on the number of enabled queues. + When that happens driver must maintain the balance of entries + (preferably duplicating the smaller table). + """ + + channels = cfg.ethnl.channels_get({'header': {'dev-index': cfg.ifindex}}) + ch_max = channels['combined-max'] + qcnt = channels['combined-count'] + + if ch_max < 2: + raise KsftSkipEx(f"Not enough queues for the test: {ch_max}") + + ethtool(f"-L {cfg.ifname} combined 2") + defer(ethtool, f"-L {cfg.ifname} combined {qcnt}") + + ethtool(f"-X {cfg.ifname} weight 1 7") + defer(ethtool, f"-X {cfg.ifname} default") + + ethtool(f"-L {cfg.ifname} combined {ch_max}") + data = get_rss(cfg) + ksft_eq(0, min(data['rss-indirection-table'])) + ksft_eq(1, max(data['rss-indirection-table'])) + + ksft_eq(7, + data['rss-indirection-table'].count(1) / + data['rss-indirection-table'].count(0), + f"Table imbalance after resize: {data['rss-indirection-table']}") + + +def test_hitless_key_update(cfg): + """Test that flows may be rehashed without impacting traffic. + + Some workloads may want to rehash the flows in response to an imbalance. + Most effective way to do that is changing the RSS key. Check that changing + the key does not cause link flaps or traffic disruption. + + Disrupting traffic for key update is not a bug, but makes the key + update unusable for rehashing under load. + """ + data = get_rss(cfg) + key_len = len(data['rss-hash-key']) + + key = _rss_key_rand(key_len) + + tgen = GenerateTraffic(cfg) + try: + errors0, carrier0 = get_drop_err_sum(cfg) + t0 = datetime.datetime.now() + ethtool(f"-X {cfg.ifname} hkey " + _rss_key_str(key)) + t1 = datetime.datetime.now() + errors1, carrier1 = get_drop_err_sum(cfg) + finally: + tgen.wait_pkts_and_stop(5000) + + ksft_lt((t1 - t0).total_seconds(), 0.2) + ksft_eq(errors1 - errors1, 0) + ksft_eq(carrier1 - carrier0, 0) + + +def test_rss_context_dump(cfg): + """ + Test dumping RSS contexts. This tests mostly exercises the kernel APIs. + """ + + # Get a random key of the right size + data = get_rss(cfg) + if 'rss-hash-key' in data: + key_data = _rss_key_rand(len(data['rss-hash-key'])) + key = _rss_key_str(key_data) + else: + key_data = [] + key = "ba:ad" + + ids = [] + try: + ids.append(ethtool_create(cfg, "-X", f"context new")) + defer(ethtool, f"-X {cfg.ifname} context {ids[-1]} delete") + + ids.append(ethtool_create(cfg, "-X", f"context new weight 1 1")) + defer(ethtool, f"-X {cfg.ifname} context {ids[-1]} delete") + + ids.append(ethtool_create(cfg, "-X", f"context new hkey {key}")) + defer(ethtool, f"-X {cfg.ifname} context {ids[-1]} delete") + except CmdExitFailure: + if not ids: + raise KsftSkipEx("Unable to add any contexts") + ksft_pr(f"Added only {len(ids)} out of 3 contexts") + + expect_tuples = set([(cfg.ifname, -1)] + [(cfg.ifname, ctx_id) for ctx_id in ids]) + + # Dump all + ctxs = cfg.ethnl.rss_get({}, dump=True) + tuples = [(c['header']['dev-name'], c.get('context', -1)) for c in ctxs] + ksft_eq(len(tuples), len(set(tuples)), "duplicates in context dump") + ctx_tuples = set([ctx for ctx in tuples if ctx[0] == cfg.ifname]) + ksft_eq(expect_tuples, ctx_tuples) + + # Sanity-check the results + for data in ctxs: + ksft_ne(set(data.get('indir', [1])), {0}, "indir table is all zero") + ksft_ne(set(data.get('hkey', [1])), {0}, "key is all zero") + + # More specific checks + if len(ids) > 1 and data.get('context') == ids[1]: + ksft_eq(set(data['indir']), {0, 1}, + "ctx1 - indir table mismatch") + if len(ids) > 2 and data.get('context') == ids[2]: + ksft_eq(data['hkey'], bytes(key_data), "ctx2 - key mismatch") + + # Ifindex filter + ctxs = cfg.ethnl.rss_get({'header': {'dev-name': cfg.ifname}}, dump=True) + tuples = [(c['header']['dev-name'], c.get('context', -1)) for c in ctxs] + ctx_tuples = set(tuples) + ksft_eq(len(tuples), len(ctx_tuples), "duplicates in context dump") + ksft_eq(expect_tuples, ctx_tuples) + + # Skip ctx 0 + expect_tuples.remove((cfg.ifname, -1)) + + ctxs = cfg.ethnl.rss_get({'start-context': 1}, dump=True) + tuples = [(c['header']['dev-name'], c.get('context', -1)) for c in ctxs] + ksft_eq(len(tuples), len(set(tuples)), "duplicates in context dump") + ctx_tuples = set([ctx for ctx in tuples if ctx[0] == cfg.ifname]) + ksft_eq(expect_tuples, ctx_tuples) + + # And finally both with ifindex and skip main + ctxs = cfg.ethnl.rss_get({'header': {'dev-name': cfg.ifname}, 'start-context': 1}, dump=True) + ctx_tuples = set([(c['header']['dev-name'], c.get('context', -1)) for c in ctxs]) + ksft_eq(expect_tuples, ctx_tuples) + + +def test_rss_context(cfg, ctx_cnt=1, create_with_cfg=None): + """ + Test separating traffic into RSS contexts. + The queues will be allocated 2 for each context: + ctx0 ctx1 ctx2 ctx3 + [0 1] [2 3] [4 5] [6 7] ... + """ + + require_ntuple(cfg) + + requested_ctx_cnt = ctx_cnt + + # Try to allocate more queues when necessary + qcnt = len(_get_rx_cnts(cfg)) + if qcnt < 2 + 2 * ctx_cnt: + try: + ksft_pr(f"Increasing queue count {qcnt} -> {2 + 2 * ctx_cnt}") + ethtool(f"-L {cfg.ifname} combined {2 + 2 * ctx_cnt}") + defer(ethtool, f"-L {cfg.ifname} combined {qcnt}") + except: + raise KsftSkipEx("Not enough queues for the test") + + ports = [] + + # Use queues 0 and 1 for normal traffic + ethtool(f"-X {cfg.ifname} equal 2") + defer(ethtool, f"-X {cfg.ifname} default") + + for i in range(ctx_cnt): + want_cfg = f"start {2 + i * 2} equal 2" + create_cfg = want_cfg if create_with_cfg else "" + + try: + ctx_id = ethtool_create(cfg, "-X", f"context new {create_cfg}") + defer(ethtool, f"-X {cfg.ifname} context {ctx_id} delete") + except CmdExitFailure: + # try to carry on and skip at the end + if i == 0: + raise + ksft_pr(f"Failed to create context {i + 1}, trying to test what we got") + ctx_cnt = i + if cfg.context_cnt is None: + cfg.context_cnt = ctx_cnt + break + + _rss_key_check(cfg, context=ctx_id) + + if not create_with_cfg: + ethtool(f"-X {cfg.ifname} context {ctx_id} {want_cfg}") + _rss_key_check(cfg, context=ctx_id) + + # Sanity check the context we just created + data = get_rss(cfg, ctx_id) + ksft_eq(min(data['rss-indirection-table']), 2 + i * 2, "Unexpected context cfg: " + str(data)) + ksft_eq(max(data['rss-indirection-table']), 2 + i * 2 + 1, "Unexpected context cfg: " + str(data)) + + ports.append(rand_port()) + flow = f"flow-type tcp{cfg.addr_ipver} dst-ip {cfg.addr} dst-port {ports[i]} context {ctx_id}" + ntuple = ethtool_create(cfg, "-N", flow) + defer(ethtool, f"-N {cfg.ifname} delete {ntuple}") + + _ntuple_rule_check(cfg, ntuple, ctx_id) + + for i in range(ctx_cnt): + _send_traffic_check(cfg, ports[i], f"context {i}", + { 'target': (2+i*2, 3+i*2), + 'noise': (0, 1), + 'empty': list(range(2, 2+i*2)) + list(range(4+i*2, 2+2*ctx_cnt)) }) + + if requested_ctx_cnt != ctx_cnt: + raise KsftSkipEx(f"Tested only {ctx_cnt} contexts, wanted {requested_ctx_cnt}") + + +def test_rss_context4(cfg): + test_rss_context(cfg, 4) + + +def test_rss_context32(cfg): + test_rss_context(cfg, 32) + + +def test_rss_context4_create_with_cfg(cfg): + test_rss_context(cfg, 4, create_with_cfg=True) + + +def test_rss_context_queue_reconfigure(cfg): + test_rss_queue_reconfigure(cfg, main_ctx=False) + + +def test_rss_context_out_of_order(cfg, ctx_cnt=4): + """ + Test separating traffic into RSS contexts. + Contexts are removed in semi-random order, and steering re-tested + to make sure removal doesn't break steering to surviving contexts. + Test requires 3 contexts to work. + """ + + require_ntuple(cfg) + require_context_cnt(cfg, 4) + + # Try to allocate more queues when necessary + qcnt = len(_get_rx_cnts(cfg)) + if qcnt < 2 + 2 * ctx_cnt: + try: + ksft_pr(f"Increasing queue count {qcnt} -> {2 + 2 * ctx_cnt}") + ethtool(f"-L {cfg.ifname} combined {2 + 2 * ctx_cnt}") + defer(ethtool, f"-L {cfg.ifname} combined {qcnt}") + except: + raise KsftSkipEx("Not enough queues for the test") + + ntuple = [] + ctx = [] + ports = [] + + def remove_ctx(idx): + ntuple[idx].exec() + ntuple[idx] = None + ctx[idx].exec() + ctx[idx] = None + + def check_traffic(): + for i in range(ctx_cnt): + if ctx[i]: + expected = { + 'target': (2+i*2, 3+i*2), + 'noise': (0, 1), + 'empty': list(range(2, 2+i*2)) + list(range(4+i*2, 2+2*ctx_cnt)) + } + else: + expected = { + 'target': (0, 1), + 'empty': range(2, 2+2*ctx_cnt) + } + + _send_traffic_check(cfg, ports[i], f"context {i}", expected) + + # Use queues 0 and 1 for normal traffic + ethtool(f"-X {cfg.ifname} equal 2") + defer(ethtool, f"-X {cfg.ifname} default") + + for i in range(ctx_cnt): + ctx_id = ethtool_create(cfg, "-X", f"context new start {2 + i * 2} equal 2") + ctx.append(defer(ethtool, f"-X {cfg.ifname} context {ctx_id} delete")) + + ports.append(rand_port()) + flow = f"flow-type tcp{cfg.addr_ipver} dst-ip {cfg.addr} dst-port {ports[i]} context {ctx_id}" + ntuple_id = ethtool_create(cfg, "-N", flow) + ntuple.append(defer(ethtool, f"-N {cfg.ifname} delete {ntuple_id}")) + + check_traffic() + + # Remove middle context + remove_ctx(ctx_cnt // 2) + check_traffic() + + # Remove first context + remove_ctx(0) + check_traffic() + + # Remove last context + remove_ctx(-1) + check_traffic() + + +def test_rss_context_overlap(cfg, other_ctx=0): + """ + Test contexts overlapping with each other. + Use 4 queues for the main context, but only queues 2 and 3 for context 1. + """ + + require_ntuple(cfg) + if other_ctx: + require_context_cnt(cfg, 2) + + queue_cnt = len(_get_rx_cnts(cfg)) + if queue_cnt < 4: + try: + ksft_pr(f"Increasing queue count {queue_cnt} -> 4") + ethtool(f"-L {cfg.ifname} combined 4") + defer(ethtool, f"-L {cfg.ifname} combined {queue_cnt}") + except: + raise KsftSkipEx("Not enough queues for the test") + + if other_ctx == 0: + ethtool(f"-X {cfg.ifname} equal 4") + defer(ethtool, f"-X {cfg.ifname} default") + else: + other_ctx = ethtool_create(cfg, "-X", "context new") + ethtool(f"-X {cfg.ifname} context {other_ctx} equal 4") + defer(ethtool, f"-X {cfg.ifname} context {other_ctx} delete") + + ctx_id = ethtool_create(cfg, "-X", "context new") + ethtool(f"-X {cfg.ifname} context {ctx_id} start 2 equal 2") + defer(ethtool, f"-X {cfg.ifname} context {ctx_id} delete") + + port = rand_port() + if other_ctx: + flow = f"flow-type tcp{cfg.addr_ipver} dst-ip {cfg.addr} dst-port {port} context {other_ctx}" + ntuple_id = ethtool_create(cfg, "-N", flow) + ntuple = defer(ethtool, f"-N {cfg.ifname} delete {ntuple_id}") + + # Test the main context + cnts = _get_rx_cnts(cfg) + GenerateTraffic(cfg, port=port).wait_pkts_and_stop(20000) + cnts = _get_rx_cnts(cfg, prev=cnts) + + ksft_ge(sum(cnts[ :4]), 20000, "traffic on main context: " + str(cnts)) + ksft_ge(sum(cnts[ :2]), 7000, "traffic on main context (1/2): " + str(cnts)) + ksft_ge(sum(cnts[2:4]), 7000, "traffic on main context (2/2): " + str(cnts)) + if other_ctx == 0: + ksft_eq(sum(cnts[4: ]), 0, "traffic on other queues: " + str(cnts)) + + # Now create a rule for context 1 and make sure traffic goes to a subset + if other_ctx: + ntuple.exec() + flow = f"flow-type tcp{cfg.addr_ipver} dst-ip {cfg.addr} dst-port {port} context {ctx_id}" + ntuple_id = ethtool_create(cfg, "-N", flow) + defer(ethtool, f"-N {cfg.ifname} delete {ntuple_id}") + + cnts = _get_rx_cnts(cfg) + GenerateTraffic(cfg, port=port).wait_pkts_and_stop(20000) + cnts = _get_rx_cnts(cfg, prev=cnts) + + directed = sum(cnts[2:4]) + ksft_lt(sum(cnts[ :2]), directed / 2, "traffic on main context: " + str(cnts)) + ksft_ge(directed, 20000, "traffic on extra context: " + str(cnts)) + if other_ctx == 0: + ksft_eq(sum(cnts[4: ]), 0, "traffic on other queues: " + str(cnts)) + + +def test_rss_context_overlap2(cfg): + test_rss_context_overlap(cfg, True) + + +def test_flow_add_context_missing(cfg): + """ + Test that we are not allowed to add a rule pointing to an RSS context + which was never created. + """ + + require_ntuple(cfg) + + # Find a context which doesn't exist + for ctx_id in range(1, 100): + try: + get_rss(cfg, context=ctx_id) + except CmdExitFailure: + break + + with ksft_raises(CmdExitFailure) as cm: + flow = f"flow-type tcp{cfg.addr_ipver} dst-ip {cfg.addr} dst-port 1234 context {ctx_id}" + ntuple_id = ethtool_create(cfg, "-N", flow) + ethtool(f"-N {cfg.ifname} delete {ntuple_id}") + if cm.exception: + ksft_in('Invalid argument', cm.exception.cmd.stderr) + + +def test_delete_rss_context_busy(cfg): + """ + Test that deletion returns -EBUSY when an rss context is being used + by an ntuple filter. + """ + + require_ntuple(cfg) + + # create additional rss context + ctx_id = ethtool_create(cfg, "-X", "context new") + ctx_deleter = defer(ethtool, f"-X {cfg.ifname} context {ctx_id} delete") + + # utilize context from ntuple filter + port = rand_port() + flow = f"flow-type tcp{cfg.addr_ipver} dst-ip {cfg.addr} dst-port {port} context {ctx_id}" + ntuple_id = ethtool_create(cfg, "-N", flow) + defer(ethtool, f"-N {cfg.ifname} delete {ntuple_id}") + + # attempt to delete in-use context + try: + ctx_deleter.exec_only() + ctx_deleter.cancel() + raise KsftFailEx(f"deleted context {ctx_id} used by rule {ntuple_id}") + except CmdExitFailure: + pass + + +def test_rss_ntuple_addition(cfg): + """ + Test that the queue offset (ring_cookie) of an ntuple rule is added + to the queue number read from the indirection table. + """ + + require_ntuple(cfg) + + queue_cnt = len(_get_rx_cnts(cfg)) + if queue_cnt < 4: + try: + ksft_pr(f"Increasing queue count {queue_cnt} -> 4") + ethtool(f"-L {cfg.ifname} combined 4") + defer(ethtool, f"-L {cfg.ifname} combined {queue_cnt}") + except: + raise KsftSkipEx("Not enough queues for the test") + + # Use queue 0 for normal traffic + ethtool(f"-X {cfg.ifname} equal 1") + defer(ethtool, f"-X {cfg.ifname} default") + + # create additional rss context + ctx_id = ethtool_create(cfg, "-X", "context new equal 2") + defer(ethtool, f"-X {cfg.ifname} context {ctx_id} delete") + + # utilize context from ntuple filter + port = rand_port() + flow = f"flow-type tcp{cfg.addr_ipver} dst-ip {cfg.addr} dst-port {port} context {ctx_id} action 2" + try: + ntuple_id = ethtool_create(cfg, "-N", flow) + except CmdExitFailure: + raise KsftSkipEx("Ntuple filter with RSS and nonzero action not supported") + defer(ethtool, f"-N {cfg.ifname} delete {ntuple_id}") + + _send_traffic_check(cfg, port, f"context {ctx_id}", { 'target': (2, 3), + 'empty' : (1,), + 'noise' : (0,) }) + + +def main() -> None: + with NetDrvEpEnv(__file__, nsim_test=False) as cfg: + cfg.context_cnt = None + cfg.ethnl = EthtoolFamily() + cfg.netdevnl = NetdevFamily() + + ksft_run([test_rss_key_indir, test_rss_queue_reconfigure, + test_rss_resize, test_hitless_key_update, + test_rss_context, test_rss_context4, test_rss_context32, + test_rss_context_dump, test_rss_context_queue_reconfigure, + test_rss_context_overlap, test_rss_context_overlap2, + test_rss_context_out_of_order, test_rss_context4_create_with_cfg, + test_flow_add_context_missing, + test_delete_rss_context_busy, test_rss_ntuple_addition], + args=(cfg, )) + ksft_exit() + + +if __name__ == "__main__": + main() diff --git a/tools/testing/selftests/drivers/net/hw/rss_input_xfrm.py b/tools/testing/selftests/drivers/net/hw/rss_input_xfrm.py new file mode 100755 index 000000000000..f439c434ba36 --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/rss_input_xfrm.py @@ -0,0 +1,92 @@ +#!/usr/bin/env python3 +# SPDX-License-Identifier: GPL-2.0 + +import multiprocessing +import socket +from lib.py import ksft_run, ksft_exit, ksft_eq, ksft_ge, cmd, fd_read_timeout +from lib.py import NetDrvEpEnv +from lib.py import EthtoolFamily, NetdevFamily +from lib.py import KsftSkipEx, KsftFailEx +from lib.py import rand_port + + +def traffic(cfg, local_port, remote_port, ipver): + af_inet = socket.AF_INET if ipver == "4" else socket.AF_INET6 + sock = socket.socket(af_inet, socket.SOCK_DGRAM) + sock.bind(("", local_port)) + sock.connect((cfg.remote_addr_v[ipver], remote_port)) + tgt = f"{ipver}:[{cfg.addr_v[ipver]}]:{local_port},sourceport={remote_port}" + cmd("echo a | socat - UDP" + tgt, host=cfg.remote) + fd_read_timeout(sock.fileno(), 5) + return sock.getsockopt(socket.SOL_SOCKET, socket.SO_INCOMING_CPU) + + +def test_rss_input_xfrm(cfg, ipver): + """ + Test symmetric input_xfrm. + If symmetric RSS hash is configured, send traffic twice, swapping the + src/dst UDP ports, and verify that the same queue is receiving the traffic + in both cases (IPs are constant). + """ + + if multiprocessing.cpu_count() < 2: + raise KsftSkipEx("Need at least two CPUs to test symmetric RSS hash") + + cfg.require_cmd("socat", remote=True) + + if not hasattr(socket, "SO_INCOMING_CPU"): + raise KsftSkipEx("socket.SO_INCOMING_CPU was added in Python 3.11") + + input_xfrm = cfg.ethnl.rss_get( + {'header': {'dev-name': cfg.ifname}}).get('input_xfrm') + + # Check for symmetric xor/or-xor + if not input_xfrm or (input_xfrm != 1 and input_xfrm != 2): + raise KsftSkipEx("Symmetric RSS hash not requested") + + cpus = set() + successful = 0 + for _ in range(100): + try: + port1 = rand_port(socket.SOCK_DGRAM) + port2 = rand_port(socket.SOCK_DGRAM) + cpu1 = traffic(cfg, port1, port2, ipver) + cpu2 = traffic(cfg, port2, port1, ipver) + cpus.update([cpu1, cpu2]) + ksft_eq( + cpu1, cpu2, comment=f"Received traffic on different cpus with ports ({port1 = }, {port2 = }) while symmetric hash is configured") + + successful += 1 + if successful == 10: + break + except: + continue + else: + raise KsftFailEx("Failed to run traffic") + + ksft_ge(len(cpus), 2, + comment=f"Received traffic on less than two cpus {cpus = }") + + +def test_rss_input_xfrm_ipv4(cfg): + cfg.require_ipver("4") + test_rss_input_xfrm(cfg, "4") + + +def test_rss_input_xfrm_ipv6(cfg): + cfg.require_ipver("6") + test_rss_input_xfrm(cfg, "6") + + +def main() -> None: + with NetDrvEpEnv(__file__, nsim_test=False) as cfg: + cfg.ethnl = EthtoolFamily() + cfg.netdevnl = NetdevFamily() + + ksft_run([test_rss_input_xfrm_ipv4, test_rss_input_xfrm_ipv6], + args=(cfg, )) + ksft_exit() + + +if __name__ == "__main__": + main() diff --git a/tools/testing/selftests/drivers/net/hw/settings b/tools/testing/selftests/drivers/net/hw/settings new file mode 100644 index 000000000000..e7b9417537fb --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/settings @@ -0,0 +1 @@ +timeout=0 diff --git a/tools/testing/selftests/drivers/net/hw/tso.py b/tools/testing/selftests/drivers/net/hw/tso.py new file mode 100755 index 000000000000..e1ecb92f79d9 --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/tso.py @@ -0,0 +1,241 @@ +#!/usr/bin/env python3 +# SPDX-License-Identifier: GPL-2.0 + +"""Run the tools/testing/selftests/net/csum testsuite.""" + +import fcntl +import socket +import struct +import termios +import time + +from lib.py import ksft_pr, ksft_run, ksft_exit, KsftSkipEx, KsftXfailEx +from lib.py import ksft_eq, ksft_ge, ksft_lt +from lib.py import EthtoolFamily, NetdevFamily, NetDrvEpEnv +from lib.py import bkg, cmd, defer, ethtool, ip, rand_port, wait_port_listen + + +def sock_wait_drain(sock, max_wait=1000): + """Wait for all pending write data on the socket to get ACKed.""" + for _ in range(max_wait): + one = b'\0' * 4 + outq = fcntl.ioctl(sock.fileno(), termios.TIOCOUTQ, one) + outq = struct.unpack("I", outq)[0] + if outq == 0: + break + time.sleep(0.01) + ksft_eq(outq, 0) + + +def tcp_sock_get_retrans(sock): + """Get the number of retransmissions for the TCP socket.""" + info = sock.getsockopt(socket.SOL_TCP, socket.TCP_INFO, 512) + return struct.unpack("I", info[100:104])[0] + + +def run_one_stream(cfg, ipver, remote_v4, remote_v6, should_lso): + cfg.require_cmd("socat", remote=True) + + port = rand_port() + listen_cmd = f"socat -{ipver} -t 2 -u TCP-LISTEN:{port},reuseport /dev/null,ignoreeof" + + with bkg(listen_cmd, host=cfg.remote) as nc: + wait_port_listen(port, host=cfg.remote) + + if ipver == "4": + sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM) + sock.connect((remote_v4, port)) + else: + sock = socket.socket(socket.AF_INET6, socket.SOCK_STREAM) + sock.connect((remote_v6, port)) + + # Small send to make sure the connection is working. + sock.send("ping".encode()) + sock_wait_drain(sock) + + # Send 4MB of data, record the LSO packet count. + qstat_old = cfg.netnl.qstats_get({"ifindex": cfg.ifindex}, dump=True)[0] + buf = b"0" * 1024 * 1024 * 4 + sock.send(buf) + sock_wait_drain(sock) + qstat_new = cfg.netnl.qstats_get({"ifindex": cfg.ifindex}, dump=True)[0] + + # No math behind the 10 here, but try to catch cases where + # TCP falls back to non-LSO. + ksft_lt(tcp_sock_get_retrans(sock), 10) + sock.close() + + # Check that at least 90% of the data was sent as LSO packets. + # System noise may cause false negatives. Also header overheads + # will add up to 5% of extra packes... The check is best effort. + total_lso_wire = len(buf) * 0.90 // cfg.dev["mtu"] + total_lso_super = len(buf) * 0.90 // cfg.dev["tso_max_size"] + if should_lso: + if cfg.have_stat_super_count: + ksft_ge(qstat_new['tx-hw-gso-packets'] - + qstat_old['tx-hw-gso-packets'], + total_lso_super, + comment="Number of LSO super-packets with LSO enabled") + if cfg.have_stat_wire_count: + ksft_ge(qstat_new['tx-hw-gso-wire-packets'] - + qstat_old['tx-hw-gso-wire-packets'], + total_lso_wire, + comment="Number of LSO wire-packets with LSO enabled") + else: + if cfg.have_stat_super_count: + ksft_lt(qstat_new['tx-hw-gso-packets'] - + qstat_old['tx-hw-gso-packets'], + 15, comment="Number of LSO super-packets with LSO disabled") + if cfg.have_stat_wire_count: + ksft_lt(qstat_new['tx-hw-gso-wire-packets'] - + qstat_old['tx-hw-gso-wire-packets'], + 500, comment="Number of LSO wire-packets with LSO disabled") + + +def build_tunnel(cfg, outer_ipver, tun_info): + local_v4 = NetDrvEpEnv.nsim_v4_pfx + "1" + local_v6 = NetDrvEpEnv.nsim_v6_pfx + "1" + remote_v4 = NetDrvEpEnv.nsim_v4_pfx + "2" + remote_v6 = NetDrvEpEnv.nsim_v6_pfx + "2" + + local_addr = cfg.addr_v[outer_ipver] + remote_addr = cfg.remote_addr_v[outer_ipver] + + tun_type = tun_info[0] + tun_arg = tun_info[2] + ip(f"link add {tun_type}-ksft type {tun_type} {tun_arg} local {local_addr} remote {remote_addr} dev {cfg.ifname}") + defer(ip, f"link del {tun_type}-ksft") + ip(f"link set dev {tun_type}-ksft up") + ip(f"addr add {local_v4}/24 dev {tun_type}-ksft") + ip(f"addr add {local_v6}/64 dev {tun_type}-ksft") + + ip(f"link add {tun_type}-ksft type {tun_type} {tun_arg} local {remote_addr} remote {local_addr} dev {cfg.remote_ifname}", + host=cfg.remote) + defer(ip, f"link del {tun_type}-ksft", host=cfg.remote) + ip(f"link set dev {tun_type}-ksft up", host=cfg.remote) + ip(f"addr add {remote_v4}/24 dev {tun_type}-ksft", host=cfg.remote) + ip(f"addr add {remote_v6}/64 dev {tun_type}-ksft", host=cfg.remote) + + return remote_v4, remote_v6 + + +def test_builder(name, cfg, outer_ipver, feature, tun=None, inner_ipver=None): + """Construct specific tests from the common template.""" + def f(cfg): + cfg.require_ipver(outer_ipver) + + if not cfg.have_stat_super_count and \ + not cfg.have_stat_wire_count: + raise KsftSkipEx(f"Device does not support LSO queue stats") + + ipver = outer_ipver + if tun: + remote_v4, remote_v6 = build_tunnel(cfg, ipver, tun) + ipver = inner_ipver + else: + remote_v4 = cfg.remote_addr_v["4"] + remote_v6 = cfg.remote_addr_v["6"] + + tun_partial = tun and tun[1] + # Tunnel which can silently fall back to gso-partial + has_gso_partial = tun and 'tx-gso-partial' in cfg.features + + # For TSO4 via partial we need mangleid + if ipver == "4" and feature in cfg.partial_features: + ksft_pr("Testing with mangleid enabled") + if 'tx-tcp-mangleid-segmentation' not in cfg.features: + ethtool(f"-K {cfg.ifname} tx-tcp-mangleid-segmentation on") + defer(ethtool, f"-K {cfg.ifname} tx-tcp-mangleid-segmentation off") + + # First test without the feature enabled. + ethtool(f"-K {cfg.ifname} {feature} off") + if has_gso_partial: + ethtool(f"-K {cfg.ifname} tx-gso-partial off") + run_one_stream(cfg, ipver, remote_v4, remote_v6, should_lso=False) + + # Now test with the feature enabled. + # For compatible tunnels only - just GSO partial, not specific feature. + if has_gso_partial: + ethtool(f"-K {cfg.ifname} tx-gso-partial on") + run_one_stream(cfg, ipver, remote_v4, remote_v6, + should_lso=tun_partial) + + # Full feature enabled. + if feature in cfg.features: + ethtool(f"-K {cfg.ifname} {feature} on") + run_one_stream(cfg, ipver, remote_v4, remote_v6, should_lso=True) + else: + raise KsftXfailEx(f"Device does not support {feature}") + + f.__name__ = name + ((outer_ipver + "_") if tun else "") + "ipv" + inner_ipver + return f + + +def query_nic_features(cfg) -> None: + """Query and cache the NIC features.""" + cfg.have_stat_super_count = False + cfg.have_stat_wire_count = False + + cfg.features = set() + features = cfg.ethnl.features_get({"header": {"dev-index": cfg.ifindex}}) + for f in features["active"]["bits"]["bit"]: + cfg.features.add(f["name"]) + + # Check which features are supported via GSO partial + cfg.partial_features = set() + if 'tx-gso-partial' in cfg.features: + ethtool(f"-K {cfg.ifname} tx-gso-partial off") + + no_partial = set() + features = cfg.ethnl.features_get({"header": {"dev-index": cfg.ifindex}}) + for f in features["active"]["bits"]["bit"]: + no_partial.add(f["name"]) + cfg.partial_features = cfg.features - no_partial + ethtool(f"-K {cfg.ifname} tx-gso-partial on") + + stats = cfg.netnl.qstats_get({"ifindex": cfg.ifindex}, dump=True) + if stats: + if 'tx-hw-gso-packets' in stats[0]: + ksft_pr("Detected qstat for LSO super-packets") + cfg.have_stat_super_count = True + if 'tx-hw-gso-wire-packets' in stats[0]: + ksft_pr("Detected qstat for LSO wire-packets") + cfg.have_stat_wire_count = True + + +def main() -> None: + with NetDrvEpEnv(__file__, nsim_test=False) as cfg: + cfg.ethnl = EthtoolFamily() + cfg.netnl = NetdevFamily() + + query_nic_features(cfg) + + test_info = ( + # name, v4/v6 ethtool_feature tun:(type, partial, args) + ("", "4", "tx-tcp-segmentation", None), + ("", "6", "tx-tcp6-segmentation", None), + ("vxlan", "", "tx-udp_tnl-segmentation", ("vxlan", True, "id 100 dstport 4789 noudpcsum")), + ("vxlan_csum", "", "tx-udp_tnl-csum-segmentation", ("vxlan", False, "id 100 dstport 4789 udpcsum")), + ("gre", "4", "tx-gre-segmentation", ("ipgre", False, "")), + ("gre", "6", "tx-gre-segmentation", ("ip6gre", False, "")), + ) + + cases = [] + for outer_ipver in ["4", "6"]: + for info in test_info: + # Skip if test which only works for a specific IP version + if info[1] and outer_ipver != info[1]: + continue + + cases.append(test_builder(info[0], cfg, outer_ipver, info[2], + tun=info[3], inner_ipver="4")) + if info[3]: + cases.append(test_builder(info[0], cfg, outer_ipver, info[2], + tun=info[3], inner_ipver="6")) + + ksft_run(cases=cases, args=(cfg, )) + ksft_exit() + + +if __name__ == "__main__": + main() diff --git a/tools/testing/selftests/drivers/net/hw/xsk_reconfig.py b/tools/testing/selftests/drivers/net/hw/xsk_reconfig.py new file mode 100755 index 000000000000..d19d1d518208 --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/xsk_reconfig.py @@ -0,0 +1,60 @@ +#!/usr/bin/env python3 +# SPDX-License-Identifier: GPL-2.0 + +# This is intended to be run on a virtio-net guest interface. +# The test binds the XDP socket to the interface without setting +# the fill ring to trigger delayed refill_work. This helps to +# make it easier to reproduce the deadlock when XDP program, +# XDP socket bind/unbind, rx ring resize race with refill_work on +# the buggy kernel. +# +# The Qemu command to setup virtio-net +# -netdev tap,id=hostnet1,vhost=on,script=no,downscript=no +# -device virtio-net-pci,netdev=hostnet1,iommu_platform=on,disable-legacy=on + +from lib.py import ksft_exit, ksft_run +from lib.py import KsftSkipEx, KsftFailEx +from lib.py import NetDrvEnv +from lib.py import bkg, ip, cmd, ethtool +import time + +def _get_rx_ring_entries(cfg): + output = ethtool(f"-g {cfg.ifname}", json=True) + return output[0]["rx"] + +def setup_xsk(cfg, xdp_queue_id = 0) -> bkg: + # Probe for support + xdp = cmd(f'{cfg.net_lib_dir / "xdp_helper"} - -', fail=False) + if xdp.ret == 255: + raise KsftSkipEx('AF_XDP unsupported') + elif xdp.ret > 0: + raise KsftFailEx('unable to create AF_XDP socket') + + try: + return bkg(f'{cfg.net_lib_dir / "xdp_helper"} {cfg.ifindex} ' \ + '{xdp_queue_id} -z', ksft_wait=3) + except: + raise KsftSkipEx('Failed to bind XDP socket in zerocopy.\n' \ + 'Please consider adding iommu_platform=on ' \ + 'when setting up virtio-net-pci') + +def check_xdp_bind(cfg): + with setup_xsk(cfg): + ip(f"link set dev %s xdp obj %s sec xdp" % + (cfg.ifname, cfg.net_lib_dir / "xdp_dummy.bpf.o")) + ip(f"link set dev %s xdp off" % cfg.ifname) + +def check_rx_resize(cfg): + with setup_xsk(cfg): + rx_ring = _get_rx_ring_entries(cfg) + ethtool(f"-G %s rx %d" % (cfg.ifname, rx_ring // 2)) + ethtool(f"-G %s rx %d" % (cfg.ifname, rx_ring)) + +def main(): + with NetDrvEnv(__file__, nsim_test=False) as cfg: + ksft_run([check_xdp_bind, check_rx_resize], + args=(cfg, )) + ksft_exit() + +if __name__ == "__main__": + main() diff --git a/tools/testing/selftests/drivers/net/lib/py/__init__.py b/tools/testing/selftests/drivers/net/lib/py/__init__.py new file mode 100644 index 000000000000..401e70f7f136 --- /dev/null +++ b/tools/testing/selftests/drivers/net/lib/py/__init__.py @@ -0,0 +1,19 @@ +# SPDX-License-Identifier: GPL-2.0 + +import sys +from pathlib import Path + +KSFT_DIR = (Path(__file__).parent / "../../../..").resolve() + +try: + sys.path.append(KSFT_DIR.as_posix()) + from net.lib.py import * +except ModuleNotFoundError as e: + ksft_pr("Failed importing `net` library from kernel sources") + ksft_pr(str(e)) + ktap_result(True, comment="SKIP") + sys.exit(4) + +from .env import * +from .load import * +from .remote import Remote diff --git a/tools/testing/selftests/drivers/net/lib/py/env.py b/tools/testing/selftests/drivers/net/lib/py/env.py new file mode 100644 index 000000000000..3bccddf8cbc5 --- /dev/null +++ b/tools/testing/selftests/drivers/net/lib/py/env.py @@ -0,0 +1,282 @@ +# SPDX-License-Identifier: GPL-2.0 + +import os +import time +from pathlib import Path +from lib.py import KsftSkipEx, KsftXfailEx +from lib.py import ksft_setup +from lib.py import cmd, ethtool, ip, CmdExitFailure +from lib.py import NetNS, NetdevSimDev +from .remote import Remote + + +class NetDrvEnvBase: + """ + Base class for a NIC / host environments + + Attributes: + test_dir: Path to the source directory of the test + net_lib_dir: Path to the net/lib directory + """ + def __init__(self, src_path): + self.src_path = Path(src_path) + self.test_dir = self.src_path.parent.resolve() + self.net_lib_dir = (Path(__file__).parent / "../../../../net/lib").resolve() + + self.env = self._load_env_file() + + def _load_env_file(self): + env = os.environ.copy() + + src_dir = Path(self.src_path).parent.resolve() + if not (src_dir / "net.config").exists(): + return ksft_setup(env) + + with open((src_dir / "net.config").as_posix(), 'r') as fp: + for line in fp.readlines(): + full_file = line + # Strip comments + pos = line.find("#") + if pos >= 0: + line = line[:pos] + line = line.strip() + if not line: + continue + pair = line.split('=', maxsplit=1) + if len(pair) != 2: + raise Exception("Can't parse configuration line:", full_file) + env[pair[0]] = pair[1] + return ksft_setup(env) + + +class NetDrvEnv(NetDrvEnvBase): + """ + Class for a single NIC / host env, with no remote end + """ + def __init__(self, src_path, nsim_test=None, **kwargs): + super().__init__(src_path) + + self._ns = None + + if 'NETIF' in self.env: + if nsim_test is True: + raise KsftXfailEx("Test only works on netdevsim") + + self.dev = ip("-d link show dev " + self.env['NETIF'], json=True)[0] + else: + if nsim_test is False: + raise KsftXfailEx("Test does not work on netdevsim") + + self._ns = NetdevSimDev(**kwargs) + self.dev = self._ns.nsims[0].dev + self.ifname = self.dev['ifname'] + self.ifindex = self.dev['ifindex'] + + def __enter__(self): + ip(f"link set dev {self.dev['ifname']} up") + + return self + + def __exit__(self, ex_type, ex_value, ex_tb): + """ + __exit__ gets called at the end of a "with" block. + """ + self.__del__() + + def __del__(self): + if self._ns: + self._ns.remove() + self._ns = None + + +class NetDrvEpEnv(NetDrvEnvBase): + """ + Class for an environment with a local device and "remote endpoint" + which can be used to send traffic in. + + For local testing it creates two network namespaces and a pair + of netdevsim devices. + """ + + # Network prefixes used for local tests + nsim_v4_pfx = "192.0.2." + nsim_v6_pfx = "2001:db8::" + + def __init__(self, src_path, nsim_test=None): + super().__init__(src_path) + + self._stats_settle_time = None + + # Things we try to destroy + self.remote = None + # These are for local testing state + self._netns = None + self._ns = None + self._ns_peer = None + + self.addr_v = { "4": None, "6": None } + self.remote_addr_v = { "4": None, "6": None } + + if "NETIF" in self.env: + if nsim_test is True: + raise KsftXfailEx("Test only works on netdevsim") + self._check_env() + + self.dev = ip("-d link show dev " + self.env['NETIF'], json=True)[0] + + self.addr_v["4"] = self.env.get("LOCAL_V4") + self.addr_v["6"] = self.env.get("LOCAL_V6") + self.remote_addr_v["4"] = self.env.get("REMOTE_V4") + self.remote_addr_v["6"] = self.env.get("REMOTE_V6") + kind = self.env["REMOTE_TYPE"] + args = self.env["REMOTE_ARGS"] + else: + if nsim_test is False: + raise KsftXfailEx("Test does not work on netdevsim") + + self.create_local() + + self.dev = self._ns.nsims[0].dev + + self.addr_v["4"] = self.nsim_v4_pfx + "1" + self.addr_v["6"] = self.nsim_v6_pfx + "1" + self.remote_addr_v["4"] = self.nsim_v4_pfx + "2" + self.remote_addr_v["6"] = self.nsim_v6_pfx + "2" + kind = "netns" + args = self._netns.name + + self.remote = Remote(kind, args, src_path) + + self.addr_ipver = "6" if self.addr_v["6"] else "4" + self.addr = self.addr_v[self.addr_ipver] + self.remote_addr = self.remote_addr_v[self.addr_ipver] + + # Bracketed addresses, some commands need IPv6 to be inside [] + self.baddr = f"[{self.addr_v['6']}]" if self.addr_v["6"] else self.addr_v["4"] + self.remote_baddr = f"[{self.remote_addr_v['6']}]" if self.remote_addr_v["6"] else self.remote_addr_v["4"] + + self.ifname = self.dev['ifname'] + self.ifindex = self.dev['ifindex'] + + # resolve remote interface name + self.remote_ifname = self.resolve_remote_ifc() + + self._required_cmd = {} + + def create_local(self): + self._netns = NetNS() + self._ns = NetdevSimDev() + self._ns_peer = NetdevSimDev(ns=self._netns) + + with open("/proc/self/ns/net") as nsfd0, \ + open("/var/run/netns/" + self._netns.name) as nsfd1: + ifi0 = self._ns.nsims[0].ifindex + ifi1 = self._ns_peer.nsims[0].ifindex + NetdevSimDev.ctrl_write('link_device', + f'{nsfd0.fileno()}:{ifi0} {nsfd1.fileno()}:{ifi1}') + + ip(f" addr add dev {self._ns.nsims[0].ifname} {self.nsim_v4_pfx}1/24") + ip(f"-6 addr add dev {self._ns.nsims[0].ifname} {self.nsim_v6_pfx}1/64 nodad") + ip(f" link set dev {self._ns.nsims[0].ifname} up") + + ip(f" addr add dev {self._ns_peer.nsims[0].ifname} {self.nsim_v4_pfx}2/24", ns=self._netns) + ip(f"-6 addr add dev {self._ns_peer.nsims[0].ifname} {self.nsim_v6_pfx}2/64 nodad", ns=self._netns) + ip(f" link set dev {self._ns_peer.nsims[0].ifname} up", ns=self._netns) + + def _check_env(self): + vars_needed = [ + ["LOCAL_V4", "LOCAL_V6"], + ["REMOTE_V4", "REMOTE_V6"], + ["REMOTE_TYPE"], + ["REMOTE_ARGS"] + ] + missing = [] + + for choice in vars_needed: + for entry in choice: + if entry in self.env: + break + else: + missing.append(choice) + # Make sure v4 / v6 configs are symmetric + if ("LOCAL_V6" in self.env) != ("REMOTE_V6" in self.env): + missing.append(["LOCAL_V6", "REMOTE_V6"]) + if ("LOCAL_V4" in self.env) != ("REMOTE_V4" in self.env): + missing.append(["LOCAL_V4", "REMOTE_V4"]) + if missing: + raise Exception("Invalid environment, missing configuration:", missing, + "Please see tools/testing/selftests/drivers/net/README.rst") + + def resolve_remote_ifc(self): + v4 = v6 = None + if self.remote_addr_v["4"]: + v4 = ip("addr show to " + self.remote_addr_v["4"], json=True, host=self.remote) + if self.remote_addr_v["6"]: + v6 = ip("addr show to " + self.remote_addr_v["6"], json=True, host=self.remote) + if v4 and v6 and v4[0]["ifname"] != v6[0]["ifname"]: + raise Exception("Can't resolve remote interface name, v4 and v6 don't match") + if (v4 and len(v4) > 1) or (v6 and len(v6) > 1): + raise Exception("Can't resolve remote interface name, multiple interfaces match") + return v6[0]["ifname"] if v6 else v4[0]["ifname"] + + def __enter__(self): + return self + + def __exit__(self, ex_type, ex_value, ex_tb): + """ + __exit__ gets called at the end of a "with" block. + """ + self.__del__() + + def __del__(self): + if self._ns: + self._ns.remove() + self._ns = None + if self._ns_peer: + self._ns_peer.remove() + self._ns_peer = None + if self._netns: + del self._netns + self._netns = None + if self.remote: + del self.remote + self.remote = None + + def require_ipver(self, ipver): + if not self.addr_v[ipver] or not self.remote_addr_v[ipver]: + raise KsftSkipEx(f"Test requires IPv{ipver} connectivity") + + def _require_cmd(self, comm, key, host=None): + cached = self._required_cmd.get(comm, {}) + if cached.get(key) is None: + cached[key] = cmd("command -v -- " + comm, fail=False, + shell=True, host=host).ret == 0 + self._required_cmd[comm] = cached + return cached[key] + + def require_cmd(self, comm, local=True, remote=False): + if local: + if not self._require_cmd(comm, "local"): + raise KsftSkipEx("Test requires command: " + comm) + if remote: + if not self._require_cmd(comm, "remote"): + raise KsftSkipEx("Test requires (remote) command: " + comm) + + def wait_hw_stats_settle(self): + """ + Wait for HW stats to become consistent, some devices DMA HW stats + periodically so events won't be reflected until next sync. + Good drivers will tell us via ethtool what their sync period is. + """ + if self._stats_settle_time is None: + data = {} + try: + data = ethtool("-c " + self.ifname, json=True)[0] + except CmdExitFailure as e: + if "Operation not supported" not in e.cmd.stderr: + raise + + self._stats_settle_time = 0.025 + \ + data.get('stats-block-usecs', 0) / 1000 / 1000 + + time.sleep(self._stats_settle_time) diff --git a/tools/testing/selftests/drivers/net/lib/py/load.py b/tools/testing/selftests/drivers/net/lib/py/load.py new file mode 100644 index 000000000000..d9c10613ae67 --- /dev/null +++ b/tools/testing/selftests/drivers/net/lib/py/load.py @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: GPL-2.0 + +import time + +from lib.py import ksft_pr, cmd, ip, rand_port, wait_port_listen + +class GenerateTraffic: + def __init__(self, env, port=None): + env.require_cmd("iperf3", remote=True) + + self.env = env + + if port is None: + port = rand_port() + self._iperf_server = cmd(f"iperf3 -s -1 -p {port}", background=True) + wait_port_listen(port) + time.sleep(0.1) + self._iperf_client = cmd(f"iperf3 -c {env.addr} -P 16 -p {port} -t 86400", + background=True, host=env.remote) + + # Wait for traffic to ramp up + if not self._wait_pkts(pps=1000): + self.stop(verbose=True) + raise Exception("iperf3 traffic did not ramp up") + + def _wait_pkts(self, pkt_cnt=None, pps=None): + """ + Wait until we've seen pkt_cnt or until traffic ramps up to pps. + Only one of pkt_cnt or pss can be specified. + """ + pkt_start = ip("-s link show dev " + self.env.ifname, json=True)[0]["stats64"]["rx"]["packets"] + for _ in range(50): + time.sleep(0.1) + pkt_now = ip("-s link show dev " + self.env.ifname, json=True)[0]["stats64"]["rx"]["packets"] + if pps: + if pkt_now - pkt_start > pps / 10: + return True + pkt_start = pkt_now + elif pkt_cnt: + if pkt_now - pkt_start > pkt_cnt: + return True + return False + + def wait_pkts_and_stop(self, pkt_cnt): + failed = not self._wait_pkts(pkt_cnt=pkt_cnt) + self.stop(verbose=failed) + + def stop(self, verbose=None): + self._iperf_client.process(terminate=True) + if verbose: + ksft_pr(">> Client:") + ksft_pr(self._iperf_client.stdout) + ksft_pr(self._iperf_client.stderr) + self._iperf_server.process(terminate=True) + if verbose: + ksft_pr(">> Server:") + ksft_pr(self._iperf_server.stdout) + ksft_pr(self._iperf_server.stderr) diff --git a/tools/testing/selftests/drivers/net/lib/py/remote.py b/tools/testing/selftests/drivers/net/lib/py/remote.py new file mode 100644 index 000000000000..b1780b987722 --- /dev/null +++ b/tools/testing/selftests/drivers/net/lib/py/remote.py @@ -0,0 +1,15 @@ +# SPDX-License-Identifier: GPL-2.0 + +import os +import importlib + +_modules = {} + +def Remote(kind, args, src_path): + global _modules + + if kind not in _modules: + _modules[kind] = importlib.import_module("..remote_" + kind, __name__) + + dir_path = os.path.abspath(src_path + "/../") + return getattr(_modules[kind], "Remote")(args, dir_path) diff --git a/tools/testing/selftests/drivers/net/lib/py/remote_netns.py b/tools/testing/selftests/drivers/net/lib/py/remote_netns.py new file mode 100644 index 000000000000..7d5eeb0271bc --- /dev/null +++ b/tools/testing/selftests/drivers/net/lib/py/remote_netns.py @@ -0,0 +1,21 @@ +# SPDX-License-Identifier: GPL-2.0 + +import os +import subprocess + +from lib.py import cmd + + +class Remote: + def __init__(self, name, dir_path): + self.name = name + self.dir_path = dir_path + + def cmd(self, comm): + return subprocess.Popen(["ip", "netns", "exec", self.name, "bash", "-c", comm], + stdout=subprocess.PIPE, stderr=subprocess.PIPE) + + def deploy(self, what): + if os.path.isabs(what): + return what + return os.path.abspath(self.dir_path + "/" + what) diff --git a/tools/testing/selftests/drivers/net/lib/py/remote_ssh.py b/tools/testing/selftests/drivers/net/lib/py/remote_ssh.py new file mode 100644 index 000000000000..924addde19a3 --- /dev/null +++ b/tools/testing/selftests/drivers/net/lib/py/remote_ssh.py @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0 + +import os +import string +import subprocess +import random + +from lib.py import cmd + + +class Remote: + def __init__(self, name, dir_path): + self.name = name + self.dir_path = dir_path + self._tmpdir = None + + def __del__(self): + if self._tmpdir: + cmd("rm -rf " + self._tmpdir, host=self) + self._tmpdir = None + + def cmd(self, comm): + return subprocess.Popen(["ssh", "-q", self.name, comm], + stdout=subprocess.PIPE, stderr=subprocess.PIPE) + + def _mktmp(self): + return ''.join(random.choice(string.ascii_lowercase) for _ in range(8)) + + def deploy(self, what): + if not self._tmpdir: + self._tmpdir = "/tmp/" + self._mktmp() + cmd("mkdir " + self._tmpdir, host=self) + file_name = self._tmpdir + "/" + self._mktmp() + os.path.basename(what) + + if not os.path.isabs(what): + what = os.path.abspath(self.dir_path + "/" + what) + + cmd(f"scp {what} {self.name}:{file_name}") + return file_name diff --git a/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh b/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh new file mode 100644 index 000000000000..29b01b8e2215 --- /dev/null +++ b/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh @@ -0,0 +1,248 @@ +#!/usr/bin/env bash +# SPDX-License-Identifier: GPL-2.0 + +# This file contains functions and helpers to support the netconsole +# selftests +# +# Author: Breno Leitao <leitao@debian.org> + +set -euo pipefail + +LIBDIR=$(dirname "$(readlink -e "${BASH_SOURCE[0]}")") + +SRCIF="" # to be populated later +SRCIP=192.0.2.1 +DSTIF="" # to be populated later +DSTIP=192.0.2.2 + +PORT="6666" +MSG="netconsole selftest" +USERDATA_KEY="key" +USERDATA_VALUE="value" +TARGET=$(mktemp -u netcons_XXXXX) +DEFAULT_PRINTK_VALUES=$(cat /proc/sys/kernel/printk) +NETCONS_CONFIGFS="/sys/kernel/config/netconsole" +NETCONS_PATH="${NETCONS_CONFIGFS}"/"${TARGET}" +# NAMESPACE will be populated by setup_ns with a random value +NAMESPACE="" + +# IDs for netdevsim +NSIM_DEV_1_ID=$((256 + RANDOM % 256)) +NSIM_DEV_2_ID=$((512 + RANDOM % 256)) +NSIM_DEV_SYS_NEW="/sys/bus/netdevsim/new_device" + +# Used to create and delete namespaces +source "${LIBDIR}"/../../../../net/lib.sh + +# Create netdevsim interfaces +create_ifaces() { + + echo "$NSIM_DEV_2_ID" > "$NSIM_DEV_SYS_NEW" + echo "$NSIM_DEV_1_ID" > "$NSIM_DEV_SYS_NEW" + udevadm settle 2> /dev/null || true + + local NSIM1=/sys/bus/netdevsim/devices/netdevsim"$NSIM_DEV_1_ID" + local NSIM2=/sys/bus/netdevsim/devices/netdevsim"$NSIM_DEV_2_ID" + + # These are global variables + SRCIF=$(find "$NSIM1"/net -maxdepth 1 -type d ! \ + -path "$NSIM1"/net -exec basename {} \;) + DSTIF=$(find "$NSIM2"/net -maxdepth 1 -type d ! \ + -path "$NSIM2"/net -exec basename {} \;) +} + +link_ifaces() { + local NSIM_DEV_SYS_LINK="/sys/bus/netdevsim/link_device" + local SRCIF_IFIDX=$(cat /sys/class/net/"$SRCIF"/ifindex) + local DSTIF_IFIDX=$(cat /sys/class/net/"$DSTIF"/ifindex) + + exec {NAMESPACE_FD}</var/run/netns/"${NAMESPACE}" + exec {INITNS_FD}</proc/self/ns/net + + # Bind the dst interface to namespace + ip link set "${DSTIF}" netns "${NAMESPACE}" + + # Linking one device to the other one (on the other namespace} + if ! echo "${INITNS_FD}:$SRCIF_IFIDX $NAMESPACE_FD:$DSTIF_IFIDX" > $NSIM_DEV_SYS_LINK + then + echo "linking netdevsim1 with netdevsim2 should succeed" + cleanup + exit "${ksft_skip}" + fi +} + +function configure_ip() { + # Configure the IPs for both interfaces + ip netns exec "${NAMESPACE}" ip addr add "${DSTIP}"/24 dev "${DSTIF}" + ip netns exec "${NAMESPACE}" ip link set "${DSTIF}" up + + ip addr add "${SRCIP}"/24 dev "${SRCIF}" + ip link set "${SRCIF}" up +} + +function set_network() { + # setup_ns function is coming from lib.sh + setup_ns NAMESPACE + + # Create both interfaces, and assign the destination to a different + # namespace + create_ifaces + + # Link both interfaces back to back + link_ifaces + + configure_ip +} + +function create_dynamic_target() { + DSTMAC=$(ip netns exec "${NAMESPACE}" \ + ip link show "${DSTIF}" | awk '/ether/ {print $2}') + + # Create a dynamic target + mkdir "${NETCONS_PATH}" + + echo "${DSTIP}" > "${NETCONS_PATH}"/remote_ip + echo "${SRCIP}" > "${NETCONS_PATH}"/local_ip + echo "${DSTMAC}" > "${NETCONS_PATH}"/remote_mac + echo "${SRCIF}" > "${NETCONS_PATH}"/dev_name + + echo 1 > "${NETCONS_PATH}"/enabled +} + +# Do not append the release to the header of the message +function disable_release_append() { + echo 0 > "${NETCONS_PATH}"/enabled + echo 0 > "${NETCONS_PATH}"/release + echo 1 > "${NETCONS_PATH}"/enabled +} + +function cleanup() { + local NSIM_DEV_SYS_DEL="/sys/bus/netdevsim/del_device" + + # delete netconsole dynamic reconfiguration + echo 0 > "${NETCONS_PATH}"/enabled + # Remove all the keys that got created during the selftest + find "${NETCONS_PATH}/userdata/" -mindepth 1 -type d -delete + # Remove the configfs entry + rmdir "${NETCONS_PATH}" + + # Delete netdevsim devices + echo "$NSIM_DEV_2_ID" > "$NSIM_DEV_SYS_DEL" + echo "$NSIM_DEV_1_ID" > "$NSIM_DEV_SYS_DEL" + + # this is coming from lib.sh + cleanup_all_ns + + # Restoring printk configurations + echo "${DEFAULT_PRINTK_VALUES}" > /proc/sys/kernel/printk +} + +function set_user_data() { + if [[ ! -d "${NETCONS_PATH}""/userdata" ]] + then + echo "Userdata path not available in ${NETCONS_PATH}/userdata" + exit "${ksft_skip}" + fi + + KEY_PATH="${NETCONS_PATH}/userdata/${USERDATA_KEY}" + mkdir -p "${KEY_PATH}" + VALUE_PATH="${KEY_PATH}""/value" + echo "${USERDATA_VALUE}" > "${VALUE_PATH}" +} + +function listen_port_and_save_to() { + local OUTPUT=${1} + # Just wait for 2 seconds + timeout 2 ip netns exec "${NAMESPACE}" \ + socat UDP-LISTEN:"${PORT}",fork "${OUTPUT}" +} + +function validate_result() { + local TMPFILENAME="$1" + + # TMPFILENAME will contain something like: + # 6.11.1-0_fbk0_rc13_509_g30d75cea12f7,13,1822,115075213798,-;netconsole selftest: netcons_gtJHM + # key=value + + # Check if the file exists + if [ ! -f "$TMPFILENAME" ]; then + echo "FAIL: File was not generated." >&2 + exit "${ksft_fail}" + fi + + if ! grep -q "${MSG}" "${TMPFILENAME}"; then + echo "FAIL: ${MSG} not found in ${TMPFILENAME}" >&2 + cat "${TMPFILENAME}" >&2 + exit "${ksft_fail}" + fi + + if ! grep -q "${USERDATA_KEY}=${USERDATA_VALUE}" "${TMPFILENAME}"; then + echo "FAIL: ${USERDATA_KEY}=${USERDATA_VALUE} not found in ${TMPFILENAME}" >&2 + cat "${TMPFILENAME}" >&2 + exit "${ksft_fail}" + fi + + # Delete the file once it is validated, otherwise keep it + # for debugging purposes + rm "${TMPFILENAME}" + exit "${ksft_pass}" +} + +function check_for_dependencies() { + if [ "$(id -u)" -ne 0 ]; then + echo "This test must be run as root" >&2 + exit "${ksft_skip}" + fi + + if ! which socat > /dev/null ; then + echo "SKIP: socat(1) is not available" >&2 + exit "${ksft_skip}" + fi + + if ! which ip > /dev/null ; then + echo "SKIP: ip(1) is not available" >&2 + exit "${ksft_skip}" + fi + + if ! which udevadm > /dev/null ; then + echo "SKIP: udevadm(1) is not available" >&2 + exit "${ksft_skip}" + fi + + if [ ! -f "${NSIM_DEV_SYS_NEW}" ]; then + echo "SKIP: file ${NSIM_DEV_SYS_NEW} does not exist. Check if CONFIG_NETDEVSIM is enabled" >&2 + exit "${ksft_skip}" + fi + + if [ ! -d "${NETCONS_CONFIGFS}" ]; then + echo "SKIP: directory ${NETCONS_CONFIGFS} does not exist. Check if NETCONSOLE_DYNAMIC is enabled" >&2 + exit "${ksft_skip}" + fi + + if ip link show "${DSTIF}" 2> /dev/null; then + echo "SKIP: interface ${DSTIF} exists in the system. Not overwriting it." >&2 + exit "${ksft_skip}" + fi + + if ip addr list | grep -E "inet.*(${SRCIP}|${DSTIP})" 2> /dev/null; then + echo "SKIP: IPs already in use. Skipping it" >&2 + exit "${ksft_skip}" + fi +} + +function check_for_taskset() { + if ! which taskset > /dev/null ; then + echo "SKIP: taskset(1) is not available" >&2 + exit "${ksft_skip}" + fi +} + +# This is necessary if running multiple tests in a row +function pkill_socat() { + PROCESS_NAME="socat UDP-LISTEN:6666,fork ${OUTPUT_FILE}" + # socat runs under timeout(1), kill it if it is still alive + # do not fail if socat doesn't exist anymore + set +e + pkill -f "${PROCESS_NAME}" + set -e +} diff --git a/tools/testing/selftests/drivers/net/microchip/ksz9477_qos.sh b/tools/testing/selftests/drivers/net/microchip/ksz9477_qos.sh new file mode 100755 index 000000000000..82be5d013330 --- /dev/null +++ b/tools/testing/selftests/drivers/net/microchip/ksz9477_qos.sh @@ -0,0 +1,668 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2024 Pengutronix, Oleksij Rempel <kernel@pengutronix.de> + +# The script is adopted to work with the Microchip KSZ switch driver. + +ETH_FCS_LEN=4 + +WAIT_TIME=1 +NUM_NETIFS=4 +REQUIRE_JQ="yes" +REQUIRE_MZ="yes" +STABLE_MAC_ADDRS=yes +NETIF_CREATE=no +lib_dir=$(dirname $0)/../../../net/forwarding +source $lib_dir/tc_common.sh +source $lib_dir/lib.sh + +require_command dcb + +h1=${NETIFS[p1]} +swp1=${NETIFS[p2]} +swp2=${NETIFS[p3]} +h2=${NETIFS[p4]} + +H1_IPV4="192.0.2.1" +H2_IPV4="192.0.2.2" +H1_IPV6="2001:db8:1::1" +H2_IPV6="2001:db8:1::2" + +# On h1_ and h2_create do not set IP addresses to avoid interaction with the +# system, to keep packet counters clean. +h1_create() +{ + simple_if_init $h1 + sysctl_set net.ipv6.conf.${h1}.disable_ipv6 1 + # Get the MAC address of the interface to use it with mausezahn + h1_mac=$(ip -j link show dev ${h1} | jq -e '.[].address') +} + +h1_destroy() +{ + sysctl_restore net.ipv6.conf.${h1}.disable_ipv6 + simple_if_fini $h1 +} + +h2_create() +{ + simple_if_init $h2 + sysctl_set net.ipv6.conf.${h2}.disable_ipv6 1 + h2_mac=$(ip -j link show dev ${h2} | jq -e '.[].address') +} + +h2_destroy() +{ + sysctl_restore net.ipv6.conf.${h2}.disable_ipv6 + simple_if_fini $h2 +} + +switch_create() +{ + ip link set ${swp1} up + ip link set ${swp2} up + sysctl_set net.ipv6.conf.${swp1}.disable_ipv6 1 + sysctl_set net.ipv6.conf.${swp2}.disable_ipv6 1 + + # Ports should trust VLAN PCP even with vlan_filtering=0 + ip link add br0 type bridge + ip link set ${swp1} master br0 + ip link set ${swp2} master br0 + ip link set br0 up + sysctl_set net.ipv6.conf.br0.disable_ipv6 1 +} + +switch_destroy() +{ + sysctl_restore net.ipv6.conf.${swp2}.disable_ipv6 + sysctl_restore net.ipv6.conf.${swp1}.disable_ipv6 + + ip link del br0 +} + +setup_prepare() +{ + vrf_prepare + + h1_create + h2_create + switch_create +} + +cleanup() +{ + pre_cleanup + + h2_destroy + h1_destroy + switch_destroy + + vrf_cleanup +} + +set_apptrust_order() +{ + local if_name=$1 + local order=$2 + + dcb apptrust set dev ${if_name} order ${order} +} + +# Function to extract a specified field from a given JSON stats string +extract_network_stat() { + local stats_json=$1 + local field_name=$2 + + echo $(echo "$stats_json" | jq -r "$field_name") +} + +run_test() +{ + local test_name=$1; + local apptrust_order=$2; + local port_prio=$3; + local dscp_ipv=$4; + local dscp=$5; + local have_vlan=$6; + local pcp_ipv=$7; + local vlan_pcp=$8; + local ip_v6=$9 + + local rx_ipv + local tx_ipv + + RET=0 + + # Send some packet to populate the switch MAC table + $MZ ${h2} -a ${h2_mac} -b ${h1_mac} -p 64 -t icmp echores -c 1 + + # Based on the apptrust order, set the expected Internal Priority values + # for the RX and TX paths. + if [ "${apptrust_order}" == "" ]; then + echo "Apptrust order not set." + rx_ipv=${port_prio} + tx_ipv=${port_prio} + elif [ "${apptrust_order}" == "dscp" ]; then + echo "Apptrust order is DSCP." + rx_ipv=${dscp_ipv} + tx_ipv=${dscp_ipv} + elif [ "${apptrust_order}" == "pcp" ]; then + echo "Apptrust order is PCP." + rx_ipv=${pcp_ipv} + tx_ipv=${pcp_ipv} + elif [ "${apptrust_order}" == "pcp dscp" ]; then + echo "Apptrust order is PCP DSCP." + if [ ${have_vlan} -eq 1 ]; then + rx_ipv=$((dscp_ipv > pcp_ipv ? dscp_ipv : pcp_ipv)) + tx_ipv=${pcp_ipv} + else + rx_ipv=${dscp_ipv} + tx_ipv=${dscp_ipv} + fi + else + RET=1 + echo "Error: Unknown apptrust order ${apptrust_order}" + log_test "${test_name}" + return + fi + + # Most/all? of the KSZ switches do not provide per-TC counters. There + # are only tx_hi and rx_hi counters, which are used to count packets + # which are considered as high priority and most likely not assigned + # to the queue 0. + # On the ingress path, packets seem to get high priority status + # independently of the DSCP or PCP global mapping. On the egress path, + # the high priority status is assigned based on the DSCP or PCP global + # map configuration. + # The thresholds for the high priority status are not documented, but + # it seems that the switch considers packets as high priority on the + # ingress path if detected Internal Priority is greater than 0. On the + # egress path, the switch considers packets as high priority if + # detected Internal Priority is greater than 1. + if [ ${rx_ipv} -ge 1 ]; then + local expect_rx_high_prio=1 + else + local expect_rx_high_prio=0 + fi + + if [ ${tx_ipv} -ge 2 ]; then + local expect_tx_high_prio=1 + else + local expect_tx_high_prio=0 + fi + + # Use ip tool to get the current switch packet counters. ethool stats + # need to be recalculated to get the correct values. + local swp1_stats=$(ip -s -j link show dev ${swp1}) + local swp2_stats=$(ip -s -j link show dev ${swp2}) + local swp1_rx_packets_before=$(extract_network_stat "$swp1_stats" \ + '.[0].stats64.rx.packets') + local swp1_rx_bytes_before=$(extract_network_stat "$swp1_stats" \ + '.[0].stats64.rx.bytes') + local swp2_tx_packets_before=$(extract_network_stat "$swp2_stats" \ + '.[0].stats64.tx.packets') + local swp2_tx_bytes_before=$(extract_network_stat "$swp2_stats" \ + '.[0].stats64.tx.bytes') + local swp1_rx_hi_before=$(ethtool_stats_get ${swp1} "rx_hi") + local swp2_tx_hi_before=$(ethtool_stats_get ${swp2} "tx_hi") + + # Assamble the mausezahn command based on the test parameters + # For the testis with ipv4 or ipv6, use icmp response packets, + # to avoid interaction with the system, to keep packet counters + # clean. + if [ ${ip_v6} -eq 0 ]; then + local ip="-a ${h1_mac} -b ${h2_mac} -A ${H1_IPV4} \ + -B ${H2_IPV4} -t icmp unreach,code=1,dscp=${dscp}" + else + local ip="-6 -a ${h1_mac} -b ${h2_mac} -A ${H1_IPV6} \ + -B ${H2_IPV6} -t icmp6 type=1,code=0,dscp=${dscp}" + fi + + if [ ${have_vlan} -eq 1 ]; then + local vlan_pcp_opt="-Q ${vlan_pcp}:0" + else + local vlan_pcp_opt="" + fi + $MZ ${h1} ${ip} -c ${PING_COUNT} -d 10msec ${vlan_pcp_opt} + + # Wait until the switch packet counters are updated + sleep 6 + + local swp1_stats=$(ip -s -j link show dev ${swp1}) + local swp2_stats=$(ip -s -j link show dev ${swp2}) + + local swp1_rx_packets_after=$(extract_network_stat "$swp1_stats" \ + '.[0].stats64.rx.packets') + local swp1_rx_bytes_after=$(extract_network_stat "$swp1_stats" \ + '.[0].stats64.rx.bytes') + local swp2_tx_packets_after=$(extract_network_stat "$swp2_stats" \ + '.[0].stats64.tx.packets') + local swp2_tx_bytes_after=$(extract_network_stat "$swp2_stats" \ + '.[0].stats64.tx.bytes') + + local swp1_rx_packets_diff=$((${swp1_rx_packets_after} - \ + ${swp1_rx_packets_before})) + local swp2_tx_packets_diff=$((${swp2_tx_packets_after} - \ + ${swp2_tx_packets_before})) + + local swp1_rx_hi_after=$(ethtool_stats_get ${swp1} "rx_hi") + local swp2_tx_hi_after=$(ethtool_stats_get ${swp2} "tx_hi") + + # Test if any packets were received on swp1, we will rx before and after + if [ ${swp1_rx_packets_diff} -lt ${PING_COUNT} ]; then + echo "Not expected amount of received packets on ${swp1}" + echo "before ${swp1_rx_packets_before} after ${swp1_rx_packets_after}" + RET=1 + fi + + # Test if any packets were transmitted on swp2, we will tx before and after + if [ ${swp2_tx_packets_diff} -lt ${PING_COUNT} ]; then + echo "Not expected amount of transmitted packets on ${swp2}" + echo "before ${swp2_tx_packets_before} after ${swp2_tx_packets_after}" + RET=1 + fi + + # tx/rx_hi counted in bytes. So, we need to compare the difference in bytes + local swp1_rx_bytes_diff=$(($swp1_rx_bytes_after - $swp1_rx_bytes_before)) + local swp2_tx_bytes_diff=$(($swp2_tx_bytes_after - $swp2_tx_bytes_before)) + local swp1_rx_hi_diff=$(($swp1_rx_hi_after - $swp1_rx_hi_before)) + local swp2_tx_hi_diff=$(($swp2_tx_hi_after - $swp2_tx_hi_before)) + + if [ ${expect_rx_high_prio} -eq 1 ]; then + swp1_rx_hi_diff=$((${swp1_rx_hi_diff} - \ + ${swp1_rx_packets_diff} * ${ETH_FCS_LEN})) + if [ ${swp1_rx_hi_diff} -ne ${swp1_rx_bytes_diff} ]; then + echo "Not expected amount of high priority packets received on ${swp1}" + echo "RX hi diff: ${swp1_rx_hi_diff}, expected RX bytes diff: ${swp1_rx_bytes_diff}" + RET=1 + fi + else + if [ ${swp1_rx_hi_diff} -ne 0 ]; then + echo "Unexpected amount of high priority packets received on ${swp1}" + echo "RX hi diff: ${swp1_rx_hi_diff}, expected 0" + RET=1 + fi + fi + + if [ ${expect_tx_high_prio} -eq 1 ]; then + swp2_tx_hi_diff=$((${swp2_tx_hi_diff} - \ + ${swp2_tx_packets_diff} * ${ETH_FCS_LEN})) + if [ ${swp2_tx_hi_diff} -ne ${swp2_tx_bytes_diff} ]; then + echo "Not expected amount of high priority packets transmitted on ${swp2}" + echo "TX hi diff: ${swp2_tx_hi_diff}, expected TX bytes diff: ${swp2_tx_bytes_diff}" + RET=1 + fi + else + if [ ${swp2_tx_hi_diff} -ne 0 ]; then + echo "Unexpected amount of high priority packets transmitted on ${swp2}" + echo "TX hi diff: ${swp2_tx_hi_diff}, expected 0" + RET=1 + fi + fi + + log_test "${test_name}" +} + +run_test_dscp() +{ + # IPv4 test + run_test "$1" "$2" "$3" "$4" "$5" 0 0 0 0 + # IPv6 test + run_test "$1" "$2" "$3" "$4" "$5" 0 0 0 1 +} + +run_test_dscp_pcp() +{ + # IPv4 test + run_test "$1" "$2" "$3" "$4" "$5" 1 "$6" "$7" 0 + # IPv6 test + run_test "$1" "$2" "$3" "$4" "$5" 1 "$6" "$7" 1 +} + +port_default_prio_get() +{ + local if_name=$1 + local prio + + prio="$(dcb -j app show dev ${if_name} default-prio | \ + jq '.default_prio[]')" + if [ -z "${prio}" ]; then + prio=0 + fi + + echo ${prio} +} + +test_port_default() +{ + local orig_apptrust=$(port_get_default_apptrust ${swp1}) + local orig_prio=$(port_default_prio_get ${swp1}) + local apptrust_order="" + + RET=0 + + # Make sure no other priority sources will interfere with the test + set_apptrust_order ${swp1} "${apptrust_order}" + + for val in $(seq 0 7); do + dcb app replace dev ${swp1} default-prio ${val} + if [ $val -ne $(port_default_prio_get ${swp1}) ]; then + RET=1 + break + fi + + run_test_dscp "Port-default QoS classification, prio: ${val}" \ + "${apptrust_order}" ${val} 0 0 + done + + set_apptrust_order ${swp1} "${orig_apptrust}" + if [[ "$orig_apptrust" != "$(port_get_default_apptrust ${swp1})" ]]; then + RET=1 + fi + + dcb app replace dev ${swp1} default-prio ${orig_prio} + if [ $orig_prio -ne $(port_default_prio_get ${swp1}) ]; then + RET=1 + fi + + log_test "Port-default QoS classification" +} + +port_get_default_apptrust() +{ + local if_name=$1 + + dcb -j apptrust show dev ${if_name} | jq -r '.order[]' | \ + tr '\n' ' ' | xargs +} + +test_port_apptrust() +{ + local original_dscp_prios_swp1=$(get_dscp_prios ${swp1}) + local orig_apptrust=$(port_get_default_apptrust ${swp1}) + local orig_port_prio=$(port_default_prio_get ${swp1}) + local order_variants=("pcp dscp" "dscp" "pcp") + local apptrust_order + local port_prio + local dscp_prio + local pcp_prio + local dscp + local pcp + + RET=0 + + # First, test if apptrust configuration as taken by the kernel + for order in "${order_variants[@]}"; do + set_apptrust_order ${swp1} "${order}" + if [[ "$order" != "$(port_get_default_apptrust ${swp1})" ]]; then + RET=1 + break + fi + done + + log_test "Apptrust, supported variants" + + # To test if the apptrust configuration is working as expected, we need + # to set DSCP priorities for the switch port. + init_dscp_prios "${swp1}" "${original_dscp_prios_swp1}" + + # Start with a simple test where all apptrust sources are disabled + # default port priority is 0, DSCP priority is mapped to 7. + # No high priority packets should be received or transmitted. + port_prio=0 + dscp_prio=7 + dscp=4 + + dcb app replace dev ${swp1} default-prio ${port_prio} + dcb app replace dev ${swp1} dscp-prio ${dscp}:${dscp_prio} + + apptrust_order="" + set_apptrust_order ${swp1} "${apptrust_order}" + # Test with apptrust sources disabled, Packets should get port default + # priority which is 0 + run_test_dscp "Apptrust, all disabled. DSCP-prio ${dscp}:${dscp_prio}" \ + "${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp} + + apptrust_order="pcp" + set_apptrust_order ${swp1} "${apptrust_order}" + # If PCP is enabled, packets should get PCP priority, which is not + # set in this test (no VLAN tags are present in the packet). No high + # priority packets should be received or transmitted. + run_test_dscp "Apptrust, PCP enabled. DSCP-prio ${dscp}:${dscp_prio}" \ + "${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp} + + apptrust_order="dscp" + set_apptrust_order ${swp1} "${apptrust_order}" + # If DSCP is enabled, packets should get DSCP priority which is set to 7 + # in this test. High priority packets should be received and transmitted. + run_test_dscp "Apptrust, DSCP enabled. DSCP-prio ${dscp}:${dscp_prio}" \ + "${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp} + + apptrust_order="pcp dscp" + set_apptrust_order ${swp1} "${apptrust_order}" + # If PCP and DSCP are enabled, PCP would have higher apptrust priority + # so packets should get PCP priority. But in this test VLAN PCP is not + # set, so it should get DSCP priority which is set to 7. High priority + # packets should be received and transmitted. + run_test_dscp "Apptrust, PCP and DSCP are enabled. DSCP-prio ${dscp}:${dscp_prio}" \ + "${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp} + + # If VLAN PCP is set, it should have higher apptrust priority than DSCP + # so packets should get VLAN PCP priority. Send packets with VLAN PCP + # set to 0, DSCP set to 7. Packets should get VLAN PCP priority. + # No high priority packets should be transmitted. Due to nature of the + # switch, high priority packets will be received. + pcp_prio=0 + pcp=0 + run_test_dscp_pcp "Apptrust, PCP and DSCP are enabled. PCP ${pcp_prio}, DSCP-prio ${dscp}:${dscp_prio}" \ + "${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp} ${pcp_prio} ${pcp} + + # If VLAN PCP is set to 7, it should have higher apptrust priority than + # DSCP so packets should get VLAN PCP priority. Send packets with VLAN + # PCP set to 7, DSCP set to 7. Packets should get VLAN PCP priority. + # High priority packets should be received and transmitted. + pcp_prio=7 + pcp=7 + run_test_dscp_pcp "Apptrust, PCP and DSCP are enabled. PCP ${pcp_prio}, DSCP-prio ${dscp}:${dscp_prio}" \ + "${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp} ${pcp_prio} ${pcp} + # Now make sure that the switch is able to handle the case where DSCP + # priority is set to 0 and PCP priority is set to 7. Packets should get + # PCP priority. High priority packets should be received and transmitted. + dscp_prio=0 + dcb app replace dev ${swp1} dscp-prio ${dscp}:${dscp_prio} + run_test_dscp_pcp "Apptrust, PCP and DSCP are enabled. PCP ${pcp_prio}, DSCP-prio ${dscp}:${dscp_prio}" \ + "${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp} ${pcp_prio} ${pcp} + # If both VLAN PCP and DSCP are set to 0, packets should get 0 priority. + # No high priority packets should be received or transmitted. + pcp_prio=0 + pcp=0 + run_test_dscp_pcp "Apptrust, PCP and DSCP are enabled. PCP ${pcp_prio}, DSCP-prio ${dscp}:${dscp_prio}" \ + "${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp} ${pcp_prio} ${pcp} + + # Restore original priorities + if ! restore_priorities "${swp1}" "${original_dscp_prios_swp1}"; then + RET=1 + fi + + set_apptrust_order ${swp1} "${orig_apptrust}" + if [ "$orig_apptrust" != "$(port_get_default_apptrust ${swp1})" ]; then + RET=1 + fi + + dcb app replace dev ${swp1} default-prio ${orig_port_prio} + if [ $orig_port_prio -ne $(port_default_prio_get ${swp1}) ]; then + RET=1 + fi + + log_test "Apptrust, restore original settings" +} + +# Function to get current DSCP priorities +get_dscp_prios() { + local if_name=$1 + dcb -j app show dev ${if_name} | jq -c '.dscp_prio' +} + +# Function to set a specific DSCP priority on a device +replace_dscp_prio() { + local if_name=$1 + local dscp=$2 + local prio=$3 + dcb app replace dev ${if_name} dscp-prio ${dscp}:${prio} +} + +# Function to compare DSCP maps +compare_dscp_maps() { + local old_json=$1 + local new_json=$2 + local dscp=$3 + local prio=$4 + + # Create a modified old_json with the expected change for comparison + local modified_old_json=$(echo "$old_json" | + jq --argjson dscp $dscp --argjson prio $prio \ + 'map(if .[0] == $dscp then [$dscp, $prio] else . end)' | + tr -d " \n") + + # Compare new_json with the modified_old_json + if [[ "$modified_old_json" == "$new_json" ]]; then + return 0 + else + return 1 + fi +} + +# Function to set DSCP priorities +set_and_verify_dscp() { + local port=$1 + local dscp=$2 + local new_prio=$3 + + local old_prios=$(get_dscp_prios $port) + + replace_dscp_prio "$port" $dscp $new_prio + + # Fetch current settings and compare + local current_prios=$(get_dscp_prios $port) + if ! compare_dscp_maps "$old_prios" "$current_prios" $dscp $new_prio; then + echo "Error: Unintended changes detected in DSCP map for $port after setting DSCP $dscp to $new_prio." + return 1 + fi + return 0 +} + +# Function to restore original priorities +restore_priorities() { + local port=$1 + local original_prios=$2 + + echo "Removing test artifacts for $port" + local current_prios=$(get_dscp_prios $port) + local prio_str=$(echo "$current_prios" | + jq -r 'map("\(.[0]):\(.[1])") | join(" ")') + dcb app del dev $port dscp-prio $prio_str + + echo "Restoring original DSCP priorities for $port" + local restore_str=$(echo "$original_prios" | + jq -r 'map("\(.[0]):\(.[1])") | join(" ")') + dcb app add dev $port dscp-prio $restore_str + + local current_prios=$(get_dscp_prios $port) + if [[ "$original_prios" != "$current_prios" ]]; then + echo "Error: Failed to restore original DSCP priorities for $port" + return 1 + fi + return 0 +} + +# Initialize DSCP priorities. Set them to predictable values for testing. +init_dscp_prios() { + local port=$1 + local original_prios=$2 + + echo "Removing any existing DSCP priority mappins for $port" + local prio_str=$(echo "$original_prios" | + jq -r 'map("\(.[0]):\(.[1])") | join(" ")') + dcb app del dev $port dscp-prio $prio_str + + # Initialize DSCP priorities list + local dscp_prios="" + for dscp in {0..63}; do + dscp_prios+=("$dscp:0") + done + + echo "Setting initial DSCP priorities map to 0 for $port" + dcb app add dev $port dscp-prio ${dscp_prios[@]} +} + +# Main function to test global DSCP map across specified ports +test_global_dscp_map() { + local ports=("$swp1" "$swp2") + local original_dscp_prios_port0=$(get_dscp_prios ${ports[0]}) + local orig_apptrust=$(port_get_default_apptrust ${swp1}) + local orig_port_prio=$(port_default_prio_get ${swp1}) + local apptrust_order="dscp" + local port_prio=0 + local dscp_prio + local dscp + + RET=0 + + set_apptrust_order ${swp1} "${apptrust_order}" + dcb app replace dev ${swp1} default-prio ${port_prio} + + # Initialize DSCP priorities + init_dscp_prios "${ports[0]}" "$original_dscp_prios_port0" + + # Loop over each DSCP index + for dscp in {0..63}; do + # and test each Internal Priority value + for dscp_prio in {0..7}; do + # do it for each port. This is to test if the global DSCP map + # is accessible from all ports. + for port in "${ports[@]}"; do + if ! set_and_verify_dscp "$port" $dscp $dscp_prio; then + RET=1 + fi + done + + # Test if the DSCP priority is correctly applied to the packets + run_test_dscp "DSCP (${dscp}) QoS classification, prio: ${dscp_prio}" \ + "${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp} + if [ ${RET} -eq 1 ]; then + break + fi + done + done + + # Restore original priorities + if ! restore_priorities "${ports[0]}" "${original_dscp_prios_port0}"; then + RET=1 + fi + + set_apptrust_order ${swp1} "${orig_apptrust}" + if [[ "$orig_apptrust" != "$(port_get_default_apptrust ${swp1})" ]]; then + RET=1 + fi + + dcb app replace dev ${swp1} default-prio ${orig_port_prio} + if [ $orig_port_prio -ne $(port_default_prio_get ${swp1}) ]; then + RET=1 + fi + + log_test "DSCP global map" +} + +trap cleanup EXIT + +ALL_TESTS=" + test_port_default + test_port_apptrust + test_global_dscp_map +" + +setup_prepare +setup_wait +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap.sh b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap.sh index 89b55e946eed..36055279ba92 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap.sh @@ -116,7 +116,7 @@ dev_del_test() log_test "Device delete" - kill $mz_pid && wait $mz_pid &> /dev/null + kill_process $mz_pid } trap cleanup EXIT diff --git a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l3_drops.sh b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l3_drops.sh index 160891dcb4bc..db5806d189bb 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l3_drops.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l3_drops.sh @@ -595,7 +595,7 @@ irif_disabled_test() log_test "Ingress RIF disabled" - kill $mz_pid && wait $mz_pid &> /dev/null + kill_process $mz_pid ip link set dev $rp1 nomaster __addr_add_del $rp1 add 192.0.2.2/24 2001:db8:1::2/64 ip link del dev br0 type bridge @@ -645,7 +645,7 @@ erif_disabled_test() log_test "Egress RIF disabled" - kill $mz_pid && wait $mz_pid &> /dev/null + kill_process $mz_pid __addr_add_del $rp1 add 192.0.2.2/24 2001:db8:1::2/64 ip link del dev br0 type bridge devlink_trap_action_set $trap_name "drop" diff --git a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l3_exceptions.sh b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l3_exceptions.sh index 190c1b6b5365..5d6d88b600f0 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l3_exceptions.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l3_exceptions.sh @@ -202,7 +202,7 @@ mtu_value_is_too_small_test() mtu_restore $rp2 - kill $mz_pid && wait $mz_pid &> /dev/null + kill_process $mz_pid tc filter del dev $h1 ingress protocol ip pref 1 handle 101 flower } @@ -235,7 +235,7 @@ __ttl_value_is_too_small_test() log_test "TTL value is too small: TTL=$ttl_val" - kill $mz_pid && wait $mz_pid &> /dev/null + kill_process $mz_pid tc filter del dev $h1 ingress protocol ip pref 1 handle 101 flower } @@ -299,7 +299,7 @@ __mc_reverse_path_forwarding_test() log_test "Multicast reverse path forwarding: $desc" - kill $mz_pid && wait $mz_pid &> /dev/null + kill_process $mz_pid tc filter del dev $rp2 egress protocol $proto pref 1 handle 101 flower } @@ -347,7 +347,7 @@ __reject_route_test() log_test "Reject route: $desc" - kill $mz_pid && wait $mz_pid &> /dev/null + kill_process $mz_pid ip route del unreachable $unreachable tc filter del dev $h1 ingress protocol $proto pref 1 handle 101 flower } @@ -542,7 +542,7 @@ ipv4_lpm_miss_test() log_test "LPM miss: IPv4" - kill $mz_pid && wait $mz_pid &> /dev/null + kill_process $mz_pid vrf_without_routes_destroy } @@ -569,7 +569,7 @@ ipv6_lpm_miss_test() log_test "LPM miss: IPv6" - kill $mz_pid && wait $mz_pid &> /dev/null + kill_process $mz_pid vrf_without_routes_destroy } diff --git a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_policer.sh b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_policer.sh index 0bd5ffc218ac..29a672c2270f 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_policer.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_policer.sh @@ -45,63 +45,52 @@ source $lib_dir/devlink_lib.sh h1_create() { simple_if_init $h1 192.0.2.1/24 + defer simple_if_fini $h1 192.0.2.1/24 + mtu_set $h1 10000 + defer mtu_restore $h1 ip -4 route add default vrf v$h1 nexthop via 192.0.2.2 -} - -h1_destroy() -{ - ip -4 route del default vrf v$h1 nexthop via 192.0.2.2 - - mtu_restore $h1 - simple_if_fini $h1 192.0.2.1/24 + defer ip -4 route del default vrf v$h1 nexthop via 192.0.2.2 } h2_create() { simple_if_init $h2 198.51.100.1/24 + defer simple_if_fini $h2 198.51.100.1/24 + mtu_set $h2 10000 + defer mtu_restore $h2 ip -4 route add default vrf v$h2 nexthop via 198.51.100.2 -} - -h2_destroy() -{ - ip -4 route del default vrf v$h2 nexthop via 198.51.100.2 - - mtu_restore $h2 - simple_if_fini $h2 198.51.100.1/24 + defer ip -4 route del default vrf v$h2 nexthop via 198.51.100.2 } router_create() { ip link set dev $rp1 up + defer ip link set dev $rp1 down + ip link set dev $rp2 up + defer ip link set dev $rp2 down __addr_add_del $rp1 add 192.0.2.2/24 + defer __addr_add_del $rp1 del 192.0.2.2/24 + __addr_add_del $rp2 add 198.51.100.2/24 + defer __addr_add_del $rp2 del 198.51.100.2/24 + mtu_set $rp1 10000 + defer mtu_restore $rp1 + mtu_set $rp2 10000 + defer mtu_restore $rp2 ip -4 route add blackhole 198.51.100.100 + defer ip -4 route del blackhole 198.51.100.100 devlink trap set $DEVLINK_DEV trap blackhole_route action trap -} - -router_destroy() -{ - devlink trap set $DEVLINK_DEV trap blackhole_route action drop - - ip -4 route del blackhole 198.51.100.100 - - mtu_restore $rp2 - mtu_restore $rp1 - __addr_add_del $rp2 del 198.51.100.2/24 - __addr_add_del $rp1 del 192.0.2.2/24 - - ip link set dev $rp2 down - ip link set dev $rp1 down + defer devlink trap set $DEVLINK_DEV trap blackhole_route action drop } setup_prepare() @@ -114,7 +103,11 @@ setup_prepare() rp1_mac=$(mac_get $rp1) + # Reload to ensure devlink-trap settings are back to default. + defer devlink_reload + vrf_prepare + defer vrf_cleanup h1_create h2_create @@ -122,21 +115,6 @@ setup_prepare() router_create } -cleanup() -{ - pre_cleanup - - router_destroy - - h2_destroy - h1_destroy - - vrf_cleanup - - # Reload to ensure devlink-trap settings are back to default. - devlink_reload -} - rate_limits_test() { RET=0 @@ -214,7 +192,10 @@ __rate_test() # by the policer. Make sure measured received rate is about 1000 pps log_info "=== Tx rate: Highest, Policer rate: 1000 pps ===" + defer_scope_push + start_traffic $h1 192.0.2.1 198.51.100.100 $rp1_mac + defer stop_traffic $! sleep 5 # Take measurements when rate is stable @@ -229,13 +210,16 @@ __rate_test() check_err $? "Expected non-zero policer drop rate, got 0" log_info "Measured policer drop rate of $drop_rate pps" - stop_traffic + defer_scope_pop # Send packets at a rate of 1000 pps and make sure they are not dropped # by the policer log_info "=== Tx rate: 1000 pps, Policer rate: 1000 pps ===" + defer_scope_push + start_traffic $h1 192.0.2.1 198.51.100.100 $rp1_mac -d 1msec + defer stop_traffic $! sleep 5 # Take measurements when rate is stable @@ -244,7 +228,7 @@ __rate_test() check_err $? "Expected zero policer drop rate, got a drop rate of $drop_rate pps" log_info "Measured policer drop rate of $drop_rate pps" - stop_traffic + defer_scope_pop # Unbind the policer and send packets at highest possible rate. Make # sure they are not dropped by the policer and that the measured @@ -253,7 +237,10 @@ __rate_test() devlink trap group set $DEVLINK_DEV group l3_drops nopolicer + defer_scope_push + start_traffic $h1 192.0.2.1 198.51.100.100 $rp1_mac + defer stop_traffic $! rate=$(trap_rate_get) (( rate > 1000 )) @@ -265,7 +252,7 @@ __rate_test() check_err $? "Expected zero policer drop rate, got a drop rate of $drop_rate pps" log_info "Measured policer drop rate of $drop_rate pps" - stop_traffic + defer_scope_pop log_test "Trap policer rate" } diff --git a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_tunnel_ipip.sh b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_tunnel_ipip.sh index e9a82cae8c9a..4ac1dae92d0f 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_tunnel_ipip.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_tunnel_ipip.sh @@ -176,7 +176,7 @@ ecn_decap_test() log_test "$desc: Inner ECN is not ECT and outer is $ecn_desc" - kill $mz_pid && wait $mz_pid &> /dev/null + kill_process $mz_pid tc filter del dev $swp1 egress protocol ip pref 1 handle 101 flower } @@ -207,7 +207,7 @@ no_matching_tunnel_test() log_test "$desc" - kill $mz_pid && wait $mz_pid &> /dev/null + kill_process $mz_pid tc filter del dev $swp1 egress protocol ip pref 1 handle 101 flower } diff --git a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_tunnel_ipip6.sh b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_tunnel_ipip6.sh index 878125041fc3..fce885184404 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_tunnel_ipip6.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_tunnel_ipip6.sh @@ -176,7 +176,7 @@ ecn_decap_test() log_test "$desc: Inner ECN is not ECT and outer is $ecn_desc" - kill $mz_pid && wait $mz_pid &> /dev/null + kill_process $mz_pid tc filter del dev $swp1 egress protocol ipv6 pref 1 handle 101 flower } @@ -207,7 +207,7 @@ no_matching_tunnel_test() log_test "$desc" - kill $mz_pid && wait $mz_pid &> /dev/null + kill_process $mz_pid tc filter del dev $swp1 egress protocol ipv6 pref 1 handle 101 flower } diff --git a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_tunnel_vxlan.sh b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_tunnel_vxlan.sh index 5f6eb965cfd1..7aca8e5922cf 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_tunnel_vxlan.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_tunnel_vxlan.sh @@ -183,7 +183,7 @@ ecn_decap_test() log_test "$desc: Inner ECN is not ECT and outer is $ecn_desc" - kill $mz_pid && wait $mz_pid &> /dev/null + kill_process $mz_pid tc filter del dev $swp1 egress protocol ip pref 1 handle 101 flower } @@ -253,7 +253,7 @@ corrupted_packet_test() log_test "$desc" - kill $mz_pid && wait $mz_pid &> /dev/null + kill_process $mz_pid tc filter del dev $swp1 egress protocol ip pref 1 handle 101 flower } diff --git a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_tunnel_vxlan_ipv6.sh b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_tunnel_vxlan_ipv6.sh index f6c16cbb6cf7..4599c331240b 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_tunnel_vxlan_ipv6.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_tunnel_vxlan_ipv6.sh @@ -188,7 +188,7 @@ ecn_decap_test() log_test "$desc: Inner ECN is not ECT and outer is $ecn_desc" - kill $mz_pid && wait $mz_pid &> /dev/null + kill_process $mz_pid tc filter del dev $swp1 egress protocol ipv6 pref 1 handle 101 flower } @@ -262,7 +262,7 @@ corrupted_packet_test() log_test "$desc" - kill $mz_pid && wait $mz_pid &> /dev/null + kill_process $mz_pid tc filter del dev $swp1 egress protocol ipv6 pref 1 handle 101 flower } diff --git a/tools/testing/selftests/drivers/net/mlxsw/ethtool_lanes.sh b/tools/testing/selftests/drivers/net/mlxsw/ethtool_lanes.sh index 91891b9418d7..fe905a7f34b3 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/ethtool_lanes.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/ethtool_lanes.sh @@ -2,6 +2,7 @@ # SPDX-License-Identifier: GPL-2.0 lib_dir=$(dirname $0)/../../../net/forwarding +ethtool_lib_dir=$(dirname $0)/../hw ALL_TESTS=" autoneg @@ -11,7 +12,7 @@ ALL_TESTS=" NUM_NETIFS=2 : ${TIMEOUT:=30000} # ms source $lib_dir/lib.sh -source $lib_dir/ethtool_lib.sh +source $ethtool_lib_dir/ethtool_lib.sh setup_prepare() { @@ -24,8 +25,8 @@ setup_prepare() busywait "$TIMEOUT" wait_for_port_up ethtool $swp2 check_err $? "ports did not come up" - local lanes_exist=$(ethtool $swp1 | grep 'Lanes:') - if [[ -z $lanes_exist ]]; then + busywait $TIMEOUT sh -c "ethtool $swp1 | grep -q Lanes:" + if [[ $? -ne 0 ]]; then log_test "SKIP: driver does not support lanes setting" exit 1 fi @@ -122,8 +123,9 @@ autoneg() ethtool_set $swp1 speed $max_speed lanes $lanes ip link set dev $swp1 up ip link set dev $swp2 up - busywait "$TIMEOUT" wait_for_port_up ethtool $swp2 - check_err $? "ports did not come up" + + busywait $TIMEOUT sh -c "ethtool $swp1 | grep -q Lanes:" + check_err $? "Lanes parameter is not presented on time" check_lanes $swp1 $lanes $max_speed log_test "$lanes lanes is autonegotiated" @@ -160,8 +162,9 @@ autoneg_force_mode() ethtool_set $swp2 speed $max_speed lanes $lanes autoneg off ip link set dev $swp1 up ip link set dev $swp2 up - busywait "$TIMEOUT" wait_for_port_up ethtool $swp2 - check_err $? "ports did not come up" + + busywait $TIMEOUT sh -c "ethtool $swp1 | grep -q Lanes:" + check_err $? "Lanes parameter is not presented on time" check_lanes $swp1 $lanes $max_speed log_test "Autoneg off, $lanes lanes detected during force mode" diff --git a/tools/testing/selftests/drivers/net/mlxsw/mirror_gre.sh b/tools/testing/selftests/drivers/net/mlxsw/mirror_gre.sh index 76f1ab4898d9..e1ad623146d7 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/mirror_gre.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/mirror_gre.sh @@ -15,6 +15,13 @@ source $lib_dir/mirror_lib.sh source $lib_dir/mirror_gre_lib.sh source $lib_dir/mirror_gre_topo_lib.sh +ALL_TESTS=" + test_keyful + test_soft + test_tos_fixed + test_ttl_inherit +" + setup_keyful() { tunnel_create gt6-key ip6gretap 2001:db8:3::1 2001:db8:3::2 \ @@ -118,15 +125,15 @@ test_span_gre_ttl_inherit() RET=0 ip link set dev $tundev type $type ttl inherit - mirror_install $swp1 ingress $tundev "matchall $tcflags" - fail_test_span_gre_dir $tundev ingress + mirror_install $swp1 ingress $tundev "matchall" + fail_test_span_gre_dir $tundev ip link set dev $tundev type $type ttl 100 - quick_test_span_gre_dir $tundev ingress + quick_test_span_gre_dir $tundev mirror_uninstall $swp1 ingress - log_test "$what: no offload on TTL of inherit ($tcflags)" + log_test "$what: no offload on TTL of inherit" } test_span_gre_tos_fixed() @@ -138,61 +145,49 @@ test_span_gre_tos_fixed() RET=0 ip link set dev $tundev type $type tos 0x10 - mirror_install $swp1 ingress $tundev "matchall $tcflags" - fail_test_span_gre_dir $tundev ingress + mirror_install $swp1 ingress $tundev "matchall" + fail_test_span_gre_dir $tundev ip link set dev $tundev type $type tos inherit - quick_test_span_gre_dir $tundev ingress + quick_test_span_gre_dir $tundev mirror_uninstall $swp1 ingress - log_test "$what: no offload on a fixed TOS ($tcflags)" + log_test "$what: no offload on a fixed TOS" } test_span_failable() { - local should_fail=$1; shift local tundev=$1; shift local what=$1; shift RET=0 - mirror_install $swp1 ingress $tundev "matchall $tcflags" - if ((should_fail)); then - fail_test_span_gre_dir $tundev ingress - else - quick_test_span_gre_dir $tundev ingress - fi + mirror_install $swp1 ingress $tundev "matchall" + fail_test_span_gre_dir $tundev mirror_uninstall $swp1 ingress - log_test "$what: should_fail=$should_fail ($tcflags)" + log_test "fail $what" } -test_failable() +test_keyful() { - local should_fail=$1; shift - - test_span_failable $should_fail gt6-key "mirror to keyful gretap" - test_span_failable $should_fail gt6-soft "mirror to gretap w/ soft underlay" + test_span_failable gt6-key "mirror to keyful gretap" } -test_sw() +test_soft() { - slow_path_trap_install $swp1 ingress - slow_path_trap_install $swp1 egress - - test_failable 0 - - slow_path_trap_uninstall $swp1 egress - slow_path_trap_uninstall $swp1 ingress + test_span_failable gt6-soft "mirror to gretap w/ soft underlay" } -test_hw() +test_tos_fixed() { - test_failable 1 - test_span_gre_tos_fixed gt4 gretap "mirror to gretap" test_span_gre_tos_fixed gt6 ip6gretap "mirror to ip6gretap" +} + +test_ttl_inherit() +{ test_span_gre_ttl_inherit gt4 gretap "mirror to gretap" test_span_gre_ttl_inherit gt6 ip6gretap "mirror to ip6gretap" } @@ -202,16 +197,6 @@ trap cleanup EXIT setup_prepare setup_wait -if ! tc_offload_check; then - check_err 1 "Could not test offloaded functionality" - log_test "mlxsw-specific tests for mirror to gretap" - exit -fi - -tcflags="skip_hw" -test_sw - -tcflags="skip_sw" -test_hw +tests_run exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/mirror_gre_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/mirror_gre_scale.sh index e5589e2fca85..d43093310e23 100644 --- a/tools/testing/selftests/drivers/net/mlxsw/mirror_gre_scale.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/mirror_gre_scale.sh @@ -79,7 +79,7 @@ mirror_gre_tunnels_create() cat >> $MIRROR_GRE_BATCH_FILE <<-EOF filter add dev $swp1 ingress pref 1000 \ protocol ipv6 \ - flower $tcflags dst_ip $match_dip \ + flower skip_sw dst_ip $match_dip \ action mirred egress mirror dev $tun EOF done @@ -107,7 +107,7 @@ mirror_gre_tunnels_destroy() done } -__mirror_gre_test() +mirror_gre_test() { local count=$1; shift local should_fail=$1; shift @@ -131,20 +131,6 @@ __mirror_gre_test() done } -mirror_gre_test() -{ - local count=$1; shift - local should_fail=$1; shift - - if ! tc_offload_check $TC_FLOWER_NUM_NETIFS; then - check_err 1 "Could not test offloaded functionality" - return - fi - - tcflags="skip_sw" - __mirror_gre_test $count $should_fail -} - mirror_gre_setup_prepare() { h1=${NETIFS[p1]} diff --git a/tools/testing/selftests/drivers/net/mlxsw/mlxsw_lib.sh b/tools/testing/selftests/drivers/net/mlxsw/mlxsw_lib.sh index 6369927e9c37..48395cfd4f95 100644 --- a/tools/testing/selftests/drivers/net/mlxsw/mlxsw_lib.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/mlxsw_lib.sh @@ -42,7 +42,7 @@ __mlxsw_only_on_spectrum() local src=$1; shift if ! mlxsw_on_spectrum "$rev"; then - log_test_skip $src:$caller "(Spectrum-$rev only)" + log_test_xfail $src:$caller "(Spectrum-$rev only)" return 1 fi } diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_ets_strict.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_ets_strict.sh index fee74f215cec..d5b6f2cc9a29 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/qos_ets_strict.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_ets_strict.sh @@ -58,65 +58,62 @@ source qos_lib.sh h1_create() { simple_if_init $h1 + defer simple_if_fini $h1 + mtu_set $h1 10000 + defer mtu_restore $h1 vlan_create $h1 111 v$h1 192.0.2.33/28 + defer vlan_destroy $h1 111 ip link set dev $h1.111 type vlan egress-qos-map 0:1 } -h1_destroy() -{ - vlan_destroy $h1 111 - - mtu_restore $h1 - simple_if_fini $h1 -} - h2_create() { simple_if_init $h2 + defer simple_if_fini $h2 + mtu_set $h2 10000 + defer mtu_restore $h2 vlan_create $h2 222 v$h2 192.0.2.65/28 + defer vlan_destroy $h2 222 ip link set dev $h2.222 type vlan egress-qos-map 0:2 } -h2_destroy() -{ - vlan_destroy $h2 222 - - mtu_restore $h2 - simple_if_fini $h2 -} - h3_create() { simple_if_init $h3 + defer simple_if_fini $h3 + mtu_set $h3 10000 + defer mtu_restore $h3 vlan_create $h3 111 v$h3 192.0.2.34/28 - vlan_create $h3 222 v$h3 192.0.2.66/28 -} - -h3_destroy() -{ - vlan_destroy $h3 222 - vlan_destroy $h3 111 + defer vlan_destroy $h3 111 - mtu_restore $h3 - simple_if_fini $h3 + vlan_create $h3 222 v$h3 192.0.2.66/28 + defer vlan_destroy $h3 222 } switch_create() { ip link set dev $swp1 up + defer ip link set dev $swp1 down + mtu_set $swp1 10000 + defer mtu_restore $swp1 ip link set dev $swp2 up + defer ip link set dev $swp2 down + mtu_set $swp2 10000 + defer mtu_restore $swp2 # prio n -> TC n, strict scheduling lldptool -T -i $swp3 -V ETS-CFG up2tc=0:0,1:1,2:2,3:3,4:4,5:5,6:6,7:7 + defer lldptool -T -i $swp3 -V ETS-CFG up2tc=0:0,1:0,2:0,3:0,4:0,5:0,6:0,7:0 + lldptool -T -i $swp3 -V ETS-CFG tsa=$( )"0:strict,"$( )"1:strict,"$( @@ -129,85 +126,90 @@ switch_create() sleep 1 ip link set dev $swp3 up + defer ip link set dev $swp3 down + mtu_set $swp3 10000 + defer mtu_restore $swp3 + tc qdisc replace dev $swp3 root handle 101: tbf rate 1gbit \ burst 128K limit 1G + defer tc qdisc del dev $swp3 root handle 101: vlan_create $swp1 111 + defer vlan_destroy $swp1 111 + vlan_create $swp2 222 + defer vlan_destroy $swp2 222 + vlan_create $swp3 111 + defer vlan_destroy $swp3 111 + vlan_create $swp3 222 + defer vlan_destroy $swp3 222 ip link add name br111 type bridge vlan_filtering 0 + defer ip link del dev br111 ip link set dev br111 addrgenmode none + ip link set dev br111 up + defer ip link set dev br111 down + ip link set dev $swp1.111 master br111 + defer ip link set dev $swp1.111 nomaster + ip link set dev $swp3.111 master br111 + defer ip link set dev $swp3.111 nomaster ip link add name br222 type bridge vlan_filtering 0 + defer ip link del dev br222 ip link set dev br222 addrgenmode none + ip link set dev br222 up + defer ip link set dev br222 down + ip link set dev $swp2.222 master br222 + defer ip link set dev $swp2.222 nomaster + ip link set dev $swp3.222 master br222 + defer ip link set dev $swp3.222 nomaster # Make sure that ingress quotas are smaller than egress so that there is # room for both streams of traffic to be admitted to shared buffer. devlink_pool_size_thtype_save 0 devlink_pool_size_thtype_set 0 dynamic 10000000 + defer devlink_pool_size_thtype_restore 0 + devlink_pool_size_thtype_save 4 devlink_pool_size_thtype_set 4 dynamic 10000000 + defer devlink_pool_size_thtype_restore 4 devlink_port_pool_th_save $swp1 0 devlink_port_pool_th_set $swp1 0 6 + defer devlink_port_pool_th_restore $swp1 0 + devlink_tc_bind_pool_th_save $swp1 1 ingress devlink_tc_bind_pool_th_set $swp1 1 ingress 0 6 + defer devlink_tc_bind_pool_th_restore $swp1 1 ingress devlink_port_pool_th_save $swp2 0 devlink_port_pool_th_set $swp2 0 6 + defer devlink_port_pool_th_restore $swp2 0 + devlink_tc_bind_pool_th_save $swp2 2 ingress devlink_tc_bind_pool_th_set $swp2 2 ingress 0 6 + defer devlink_tc_bind_pool_th_restore $swp2 2 ingress devlink_tc_bind_pool_th_save $swp3 1 egress devlink_tc_bind_pool_th_set $swp3 1 egress 4 7 + defer devlink_tc_bind_pool_th_restore $swp3 1 egress + devlink_tc_bind_pool_th_save $swp3 2 egress devlink_tc_bind_pool_th_set $swp3 2 egress 4 7 + defer devlink_tc_bind_pool_th_restore $swp3 2 egress + devlink_port_pool_th_save $swp3 4 devlink_port_pool_th_set $swp3 4 7 -} - -switch_destroy() -{ - devlink_port_pool_th_restore $swp3 4 - devlink_tc_bind_pool_th_restore $swp3 2 egress - devlink_tc_bind_pool_th_restore $swp3 1 egress - - devlink_tc_bind_pool_th_restore $swp2 2 ingress - devlink_port_pool_th_restore $swp2 0 - - devlink_tc_bind_pool_th_restore $swp1 1 ingress - devlink_port_pool_th_restore $swp1 0 - - devlink_pool_size_thtype_restore 4 - devlink_pool_size_thtype_restore 0 - - ip link del dev br222 - ip link del dev br111 - - vlan_destroy $swp3 222 - vlan_destroy $swp3 111 - vlan_destroy $swp2 222 - vlan_destroy $swp1 111 - - tc qdisc del dev $swp3 root handle 101: - mtu_restore $swp3 - ip link set dev $swp3 down - lldptool -T -i $swp3 -V ETS-CFG up2tc=0:0,1:0,2:0,3:0,4:0,5:0,6:0,7:0 - - mtu_restore $swp2 - ip link set dev $swp2 down - - mtu_restore $swp1 - ip link set dev $swp1 down + defer devlink_port_pool_th_restore $swp3 4 } setup_prepare() @@ -224,6 +226,7 @@ setup_prepare() h3mac=$(mac_get $h3) vrf_prepare + defer vrf_cleanup h1_create h2_create @@ -231,18 +234,6 @@ setup_prepare() switch_create } -cleanup() -{ - pre_cleanup - - switch_destroy - h3_destroy - h2_destroy - h1_destroy - - vrf_cleanup -} - ping_ipv4() { ping_test $h1 192.0.2.34 " from H1" @@ -261,21 +252,38 @@ rel() " } +__run_hi_measure_rate() +{ + local what=$1; shift + local -a uc_rate + + start_traffic $h2.222 192.0.2.65 192.0.2.66 $h3mac + defer stop_traffic $! + + uc_rate=($(measure_rate $swp2 $h3 rx_octets_prio_2 "$what")) + check_err $? "Could not get high enough $what ingress rate" + + echo ${uc_rate[@]} +} + +run_hi_measure_rate() +{ + in_defer_scope __run_hi_measure_rate "$@" +} + test_ets_strict() { RET=0 # Run high-prio traffic on its own. - start_traffic $h2.222 192.0.2.65 192.0.2.66 $h3mac local -a rate_2 - rate_2=($(measure_rate $swp2 $h3 rx_octets_prio_2 "prio 2")) - check_err $? "Could not get high enough prio-2 ingress rate" + rate_2=($(run_hi_measure_rate "prio 2")) local rate_2_in=${rate_2[0]} local rate_2_eg=${rate_2[1]} - stop_traffic # $h2.222 # Start low-prio stream. start_traffic $h1.111 192.0.2.33 192.0.2.34 $h3mac + defer stop_traffic $! local -a rate_1 rate_1=($(measure_rate $swp1 $h3 rx_octets_prio_1 "prio 1")) @@ -290,14 +298,9 @@ test_ets_strict() check_err $(bc <<< "$rel21 > 105") # Start the high-prio stream--now both streams run. - start_traffic $h2.222 192.0.2.65 192.0.2.66 $h3mac - rate_3=($(measure_rate $swp2 $h3 rx_octets_prio_2 "prio 2 w/ 1")) - check_err $? "Could not get high enough prio-2 ingress rate with prio-1" + rate_3=($(run_hi_measure_rate "prio 2+1")) local rate_3_in=${rate_3[0]} local rate_3_eg=${rate_3[1]} - stop_traffic # $h2.222 - - stop_traffic # $h1.111 # High-prio should have about the same throughput whether or not # low-prio is in the system. diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_max_descriptors.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_max_descriptors.sh index 5ac4f795e333..2b5d2c2751d5 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/qos_max_descriptors.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_max_descriptors.sh @@ -69,127 +69,103 @@ mlxsw_only_on_spectrum 2+ || exit h1_create() { simple_if_init $h1 + defer simple_if_fini $h1 vlan_create $h1 111 v$h1 192.0.2.33/28 + defer vlan_destroy $h1 111 ip link set dev $h1.111 type vlan egress-qos-map 0:1 } -h1_destroy() -{ - vlan_destroy $h1 111 - - simple_if_fini $h1 -} - h2_create() { simple_if_init $h2 + defer simple_if_fini $h2 vlan_create $h2 111 v$h2 192.0.2.34/28 -} - -h2_destroy() -{ - vlan_destroy $h2 111 - - simple_if_fini $h2 + defer vlan_destroy $h2 111 } switch_create() { # pools # ----- + # devlink_pool_size_thtype_restore needs to be done first so that we can + # reset the various limits to values that are only valid for the + # original static / dynamic setting. devlink_pool_size_thtype_save 1 - devlink_pool_size_thtype_save 6 - - devlink_port_pool_th_save $swp1 1 - devlink_port_pool_th_save $swp2 6 - - devlink_tc_bind_pool_th_save $swp1 1 ingress - devlink_tc_bind_pool_th_save $swp2 1 egress - devlink_pool_size_thtype_set 1 dynamic $MAX_POOL_SIZE + defer_prio devlink_pool_size_thtype_restore 1 + + devlink_pool_size_thtype_save 6 devlink_pool_size_thtype_set 6 static $MAX_POOL_SIZE + defer_prio devlink_pool_size_thtype_restore 6 # $swp1 # ----- ip link set dev $swp1 up + defer ip link set dev $swp1 down + vlan_create $swp1 111 + defer vlan_destroy $swp1 111 ip link set dev $swp1.111 type vlan ingress-qos-map 0:0 1:1 + devlink_port_pool_th_save $swp1 1 devlink_port_pool_th_set $swp1 1 16 + defer devlink_tc_bind_pool_th_restore $swp1 1 ingress + + devlink_tc_bind_pool_th_save $swp1 1 ingress devlink_tc_bind_pool_th_set $swp1 1 ingress 1 16 + defer devlink_port_pool_th_restore $swp1 1 tc qdisc replace dev $swp1 root handle 1: \ ets bands 8 strict 8 priomap 7 6 + defer tc qdisc del dev $swp1 root + dcb buffer set dev $swp1 prio-buffer all:0 1:1 + defer dcb buffer set dev $swp1 prio-buffer all:0 # $swp2 # ----- ip link set dev $swp2 up + defer ip link set dev $swp2 down + vlan_create $swp2 111 + defer vlan_destroy $swp2 111 ip link set dev $swp2.111 type vlan egress-qos-map 0:0 1:1 + devlink_port_pool_th_save $swp2 6 devlink_port_pool_th_set $swp2 6 $MAX_POOL_SIZE + defer devlink_tc_bind_pool_th_restore $swp2 1 egress + + devlink_tc_bind_pool_th_save $swp2 1 egress devlink_tc_bind_pool_th_set $swp2 1 egress 6 $MAX_POOL_SIZE + defer devlink_port_pool_th_restore $swp2 6 tc qdisc replace dev $swp2 root handle 1: tbf rate $SHAPER_RATE \ burst 128K limit 500M + defer tc qdisc del dev $swp2 root + tc qdisc replace dev $swp2 parent 1:1 handle 11: \ ets bands 8 strict 8 priomap 7 6 + defer tc qdisc del dev $swp2 parent 1:1 handle 11: # bridge # ------ ip link add name br1 type bridge vlan_filtering 0 + defer ip link del dev br1 + ip link set dev $swp1.111 master br1 + defer ip link set dev $swp1.111 nomaster + ip link set dev br1 up + defer ip link set dev br1 down ip link set dev $swp2.111 master br1 -} - -switch_destroy() -{ - # Do this first so that we can reset the limits to values that are only - # valid for the original static / dynamic setting. - devlink_pool_size_thtype_restore 6 - devlink_pool_size_thtype_restore 1 - - # bridge - # ------ - - ip link set dev $swp2.111 nomaster - - ip link set dev br1 down - ip link set dev $swp1.111 nomaster - ip link del dev br1 - - # $swp2 - # ----- - - tc qdisc del dev $swp2 parent 1:1 handle 11: - tc qdisc del dev $swp2 root - - devlink_tc_bind_pool_th_restore $swp2 1 egress - devlink_port_pool_th_restore $swp2 6 - - vlan_destroy $swp2 111 - ip link set dev $swp2 down - - # $swp1 - # ----- - - dcb buffer set dev $swp1 prio-buffer all:0 - tc qdisc del dev $swp1 root - - devlink_tc_bind_pool_th_restore $swp1 1 ingress - devlink_port_pool_th_restore $swp1 1 - - vlan_destroy $swp1 111 - ip link set dev $swp1 down + defer ip link set dev $swp2.111 nomaster } setup_prepare() @@ -203,23 +179,13 @@ setup_prepare() h2mac=$(mac_get $h2) vrf_prepare + defer vrf_cleanup h1_create h2_create switch_create } -cleanup() -{ - pre_cleanup - - switch_destroy - h2_destroy - h1_destroy - - vrf_cleanup -} - ping_ipv4() { ping_test $h1 192.0.2.34 " h1->h2" @@ -251,6 +217,7 @@ max_descriptors() log_info "Send many small packets, packet size = $pktsize bytes" start_traffic_pktsize $pktsize $h1.111 192.0.2.33 192.0.2.34 $h2mac + defer stop_traffic $! # Sleep to wait for congestion. sleep 5 @@ -268,9 +235,6 @@ max_descriptors() check_err $(bc <<< "$perc_used < $exp_perc_used") \ "Expected > $exp_perc_used% of descriptors, handle $perc_used%" - stop_traffic - sleep 1 - log_test "Maximum descriptors usage. The percentage used is $perc_used%" } diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh index 6d892de43fa8..cd4a5c21360c 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh @@ -73,122 +73,114 @@ source qos_lib.sh h1_create() { simple_if_init $h1 192.0.2.65/28 - mtu_set $h1 10000 -} + defer simple_if_fini $h1 192.0.2.65/28 -h1_destroy() -{ - mtu_restore $h1 - simple_if_fini $h1 192.0.2.65/28 + mtu_set $h1 10000 + defer mtu_restore $h1 } h2_create() { simple_if_init $h2 + defer simple_if_fini $h2 + mtu_set $h2 10000 + defer mtu_restore $h2 vlan_create $h2 111 v$h2 192.0.2.129/28 + defer vlan_destroy $h2 111 ip link set dev $h2.111 type vlan egress-qos-map 0:1 } -h2_destroy() -{ - vlan_destroy $h2 111 - - mtu_restore $h2 - simple_if_fini $h2 -} - h3_create() { simple_if_init $h3 192.0.2.66/28 + defer simple_if_fini $h3 192.0.2.66/28 + mtu_set $h3 10000 + defer mtu_restore $h3 vlan_create $h3 111 v$h3 192.0.2.130/28 -} - -h3_destroy() -{ - vlan_destroy $h3 111 - - mtu_restore $h3 - simple_if_fini $h3 192.0.2.66/28 + defer vlan_destroy $h3 111 } switch_create() { ip link set dev $swp1 up + defer ip link set dev $swp1 down + mtu_set $swp1 10000 + defer mtu_restore $swp1 ip link set dev $swp2 up + defer ip link set dev $swp2 down + mtu_set $swp2 10000 + defer mtu_restore $swp2 ip link set dev $swp3 up + defer ip link set dev $swp3 down + mtu_set $swp3 10000 + defer mtu_restore $swp3 vlan_create $swp2 111 + defer vlan_destroy $swp2 111 + vlan_create $swp3 111 + defer vlan_destroy $swp3 111 tc qdisc replace dev $swp3 root handle 3: tbf rate 1gbit \ burst 128K limit 1G + defer tc qdisc del dev $swp3 root handle 3: + tc qdisc replace dev $swp3 parent 3:3 handle 33: \ prio bands 8 priomap 7 7 7 7 7 7 7 7 + defer tc qdisc del dev $swp3 parent 3:3 handle 33: ip link add name br1 type bridge vlan_filtering 0 + defer ip link del dev br1 ip link set dev br1 addrgenmode none ip link set dev br1 up + ip link set dev $swp1 master br1 + defer ip link set dev $swp1 nomaster + ip link set dev $swp3 master br1 + defer ip link set dev $swp3 nomaster ip link add name br111 type bridge vlan_filtering 0 + defer ip link del dev br111 ip link set dev br111 addrgenmode none ip link set dev br111 up + ip link set dev $swp2.111 master br111 + defer ip link set dev $swp2.111 nomaster + ip link set dev $swp3.111 master br111 + defer ip link set dev $swp3.111 nomaster # Make sure that ingress quotas are smaller than egress so that there is # room for both streams of traffic to be admitted to shared buffer. devlink_port_pool_th_save $swp1 0 devlink_port_pool_th_set $swp1 0 5 + defer devlink_port_pool_th_restore $swp1 0 + devlink_tc_bind_pool_th_save $swp1 0 ingress devlink_tc_bind_pool_th_set $swp1 0 ingress 0 5 + defer devlink_tc_bind_pool_th_restore $swp1 0 ingress devlink_port_pool_th_save $swp2 0 devlink_port_pool_th_set $swp2 0 5 + defer devlink_port_pool_th_restore $swp2 0 + devlink_tc_bind_pool_th_save $swp2 1 ingress devlink_tc_bind_pool_th_set $swp2 1 ingress 0 5 + defer devlink_tc_bind_pool_th_restore $swp2 1 ingress devlink_port_pool_th_save $swp3 4 devlink_port_pool_th_set $swp3 4 12 -} - -switch_destroy() -{ - devlink_port_pool_th_restore $swp3 4 - - devlink_tc_bind_pool_th_restore $swp2 1 ingress - devlink_port_pool_th_restore $swp2 0 - - devlink_tc_bind_pool_th_restore $swp1 0 ingress - devlink_port_pool_th_restore $swp1 0 - - ip link del dev br111 - ip link del dev br1 - - tc qdisc del dev $swp3 parent 3:3 handle 33: - tc qdisc del dev $swp3 root handle 3: - - vlan_destroy $swp3 111 - vlan_destroy $swp2 111 - - mtu_restore $swp3 - ip link set dev $swp3 down - - mtu_restore $swp2 - ip link set dev $swp2 down - - mtu_restore $swp1 - ip link set dev $swp1 down + defer devlink_port_pool_th_restore $swp3 4 } setup_prepare() @@ -205,6 +197,7 @@ setup_prepare() h3mac=$(mac_get $h3) vrf_prepare + defer vrf_cleanup h1_create h2_create @@ -212,45 +205,45 @@ setup_prepare() switch_create } -cleanup() +ping_ipv4() { - pre_cleanup + ping_test $h2 192.0.2.130 +} - switch_destroy - h3_destroy - h2_destroy - h1_destroy +__run_uc_measure_rate() +{ + local what=$1; shift + local -a uc_rate + + start_traffic $h2.111 192.0.2.129 192.0.2.130 $h3mac + defer stop_traffic $! + + uc_rate=($(measure_rate $swp2 $h3 rx_octets_prio_1 "$what")) + check_err $? "Could not get high enough $what ingress rate" - vrf_cleanup + echo ${uc_rate[@]} } -ping_ipv4() +run_uc_measure_rate() { - ping_test $h2 192.0.2.130 + in_defer_scope __run_uc_measure_rate "$@" } test_mc_aware() { RET=0 - local -a uc_rate - start_traffic $h2.111 192.0.2.129 192.0.2.130 $h3mac - uc_rate=($(measure_rate $swp2 $h3 rx_octets_prio_1 "UC-only")) - check_err $? "Could not get high enough UC-only ingress rate" - stop_traffic + local -a uc_rate=($(run_uc_measure_rate "UC-only")) local ucth1=${uc_rate[1]} start_traffic $h1 192.0.2.65 bc bc + defer stop_traffic $! local d0=$(date +%s) local t0=$(ethtool_stats_get $h3 rx_octets_prio_0) local u0=$(ethtool_stats_get $swp1 rx_octets_prio_0) - local -a uc_rate_2 - start_traffic $h2.111 192.0.2.129 192.0.2.130 $h3mac - uc_rate_2=($(measure_rate $swp2 $h3 rx_octets_prio_1 "UC+MC")) - check_err $? "Could not get high enough UC+MC ingress rate" - stop_traffic + local -a uc_rate_2=($(run_uc_measure_rate "UC+MC")) local ucth2=${uc_rate_2[1]} local d1=$(date +%s) @@ -272,8 +265,6 @@ test_mc_aware() local mc_ir=$(rate $u0 $u1 $interval) local mc_er=$(rate $t0 $t1 $interval) - stop_traffic - log_test "UC performance under MC overload" echo "UC-only throughput $(humanize $ucth1)" @@ -297,6 +288,7 @@ test_uc_aware() RET=0 start_traffic $h2.111 192.0.2.129 192.0.2.130 $h3mac + defer stop_traffic $! local d0=$(date +%s) local t0=$(ethtool_stats_get $h3 rx_octets_prio_1) @@ -326,8 +318,6 @@ test_uc_aware() ((attempts == passes)) check_err $? - stop_traffic - log_test "MC performance under UC overload" echo " ingress UC throughput $(humanize ${uc_ir})" echo " egress UC throughput $(humanize ${uc_er})" diff --git a/tools/testing/selftests/drivers/net/mlxsw/rif_bridge.sh b/tools/testing/selftests/drivers/net/mlxsw/rif_bridge.sh index b79542a4dcc7..4a11bf1d514a 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/rif_bridge.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/rif_bridge.sh @@ -12,6 +12,7 @@ ALL_TESTS=" bridge_rif_remaster_port " +REQUIRE_TEAMD="yes" NUM_NETIFS=2 source $lib_dir/lib.sh source $lib_dir/devlink_lib.sh diff --git a/tools/testing/selftests/drivers/net/mlxsw/rif_lag.sh b/tools/testing/selftests/drivers/net/mlxsw/rif_lag.sh index e28f978104f3..b8bbe94f4736 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/rif_lag.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/rif_lag.sh @@ -10,6 +10,7 @@ ALL_TESTS=" lag_rif_nomaster_addr " +REQUIRE_TEAMD="yes" NUM_NETIFS=2 source $lib_dir/lib.sh source $lib_dir/devlink_lib.sh diff --git a/tools/testing/selftests/drivers/net/mlxsw/rif_lag_vlan.sh b/tools/testing/selftests/drivers/net/mlxsw/rif_lag_vlan.sh index 6318cfa6434c..d1a9d379eaf3 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/rif_lag_vlan.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/rif_lag_vlan.sh @@ -10,6 +10,7 @@ ALL_TESTS=" lag_rif_nomaster_addr " +REQUIRE_TEAMD="yes" NUM_NETIFS=2 source $lib_dir/lib.sh source $lib_dir/devlink_lib.sh diff --git a/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh b/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh index 893a693ad805..45a569618424 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh @@ -186,10 +186,7 @@ bridge_vlan_flags_test() # If we did not handle references correctly, then this should produce a # trace - devlink dev reload "$DEVLINK_DEV" - - # Allow netdevices to be re-created following the reload - sleep 20 + devlink_reload log_test "bridge vlan flags" } @@ -923,12 +920,9 @@ devlink_reload_test() # devlink reload can be performed without errors RET=0 - devlink dev reload "$DEVLINK_DEV" - check_err $? "devlink reload failed" + devlink_reload log_test "devlink reload - last test" - - sleep 20 } trap cleanup EXIT diff --git a/tools/testing/selftests/drivers/net/mlxsw/sch_ets.sh b/tools/testing/selftests/drivers/net/mlxsw/sch_ets.sh index 139175fd03e7..4aaceb6b2b60 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/sch_ets.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/sch_ets.sh @@ -21,6 +21,7 @@ switch_create() # Create a bottleneck so that the DWRR process can kick in. tc qdisc replace dev $swp2 root handle 3: tbf rate 1gbit \ burst 128K limit 1G + defer tc qdisc del dev $swp2 root handle 3: ets_switch_create @@ -30,16 +31,27 @@ switch_create() # for the DWRR process. devlink_port_pool_th_save $swp1 0 devlink_port_pool_th_set $swp1 0 12 + defer devlink_port_pool_th_restore $swp1 0 + devlink_tc_bind_pool_th_save $swp1 0 ingress devlink_tc_bind_pool_th_set $swp1 0 ingress 0 12 + defer devlink_tc_bind_pool_th_restore $swp1 0 ingress + devlink_port_pool_th_save $swp2 4 devlink_port_pool_th_set $swp2 4 12 + defer devlink_port_pool_th_restore $swp2 4 + devlink_tc_bind_pool_th_save $swp2 7 egress devlink_tc_bind_pool_th_set $swp2 7 egress 4 5 + defer devlink_tc_bind_pool_th_restore $swp2 7 egress + devlink_tc_bind_pool_th_save $swp2 6 egress devlink_tc_bind_pool_th_set $swp2 6 egress 4 5 + defer devlink_tc_bind_pool_th_restore $swp2 6 egress + devlink_tc_bind_pool_th_save $swp2 5 egress devlink_tc_bind_pool_th_set $swp2 5 egress 4 5 + defer devlink_tc_bind_pool_th_restore $swp2 5 egress # Note: sch_ets_core.sh uses VLAN ingress-qos-map to assign packet # priorities at $swp1 based on their 802.1p headers. ingress-qos-map is @@ -47,20 +59,6 @@ switch_create() # 1:1, which is the mapping currently hard-coded by the driver. } -switch_destroy() -{ - devlink_tc_bind_pool_th_restore $swp2 5 egress - devlink_tc_bind_pool_th_restore $swp2 6 egress - devlink_tc_bind_pool_th_restore $swp2 7 egress - devlink_port_pool_th_restore $swp2 4 - devlink_tc_bind_pool_th_restore $swp1 0 ingress - devlink_port_pool_th_restore $swp1 0 - - ets_switch_destroy - - tc qdisc del dev $swp2 root handle 3: -} - # Callback from sch_ets_tests.sh collect_stats() { diff --git a/tools/testing/selftests/drivers/net/mlxsw/sch_red_core.sh b/tools/testing/selftests/drivers/net/mlxsw/sch_red_core.sh index 299e06a5808c..537d6baa77b7 100644 --- a/tools/testing/selftests/drivers/net/mlxsw/sch_red_core.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/sch_red_core.sh @@ -75,6 +75,18 @@ source $lib_dir/lib.sh source $lib_dir/devlink_lib.sh source mlxsw_lib.sh +stop_traffic_sleep() +{ + local pid=$1; shift + + # Issuing a kill still leaves a bunch of packets lingering in the + # buffers. This traffic then arrives at the point where a follow-up test + # is already running, and can confuse the test. Therefore sleep after + # stopping traffic to flush any leftover packets. + stop_traffic "$pid" + sleep 1 +} + ipaddr() { local host=$1; shift @@ -89,39 +101,31 @@ host_create() local host=$1; shift simple_if_init $dev + defer simple_if_fini $dev + mtu_set $dev 10000 + defer mtu_restore $dev vlan_create $dev 10 v$dev $(ipaddr $host 10)/28 + defer vlan_destroy $dev 10 ip link set dev $dev.10 type vlan egress 0:0 vlan_create $dev 11 v$dev $(ipaddr $host 11)/28 + defer vlan_destroy $dev 11 ip link set dev $dev.11 type vlan egress 0:1 } -host_destroy() -{ - local dev=$1; shift - - vlan_destroy $dev 11 - vlan_destroy $dev 10 - mtu_restore $dev - simple_if_fini $dev -} - h1_create() { host_create $h1 1 } -h1_destroy() -{ - host_destroy $h1 -} - h2_create() { host_create $h2 2 + tc qdisc add dev $h2 clsact + defer tc qdisc del dev $h2 clsact # Some of the tests in this suite use multicast traffic. As this traffic # enters BR2_10 resp. BR2_11, it is flooded to all other ports. Thus @@ -137,15 +141,9 @@ h2_create() # Prevent this by adding a shaper which limits the traffic in $h2 to # 1Gbps. - tc qdisc replace dev $h2 root handle 10: tbf rate 1gbit \ + tc qdisc replace dev $h2 root handle 10: tbf rate 200mbit \ burst 128K limit 1G -} - -h2_destroy() -{ - tc qdisc del dev $h2 root handle 10: - tc qdisc del dev $h2 clsact - host_destroy $h2 + defer tc qdisc del dev $h2 root handle 10: } h3_create() @@ -153,40 +151,54 @@ h3_create() host_create $h3 3 } -h3_destroy() -{ - host_destroy $h3 -} - switch_create() { local intf local vlan ip link add dev br1_10 type bridge + defer ip link del dev br1_10 + ip link add dev br1_11 type bridge + defer ip link del dev br1_11 ip link add dev br2_10 type bridge + defer ip link del dev br2_10 + ip link add dev br2_11 type bridge + defer ip link del dev br2_11 for intf in $swp1 $swp2 $swp3 $swp4 $swp5; do ip link set dev $intf up + defer ip link set dev $intf down + mtu_set $intf 10000 + defer mtu_restore $intf done for intf in $swp1 $swp4; do for vlan in 10 11; do vlan_create $intf $vlan + defer vlan_destroy $intf $vlan + ip link set dev $intf.$vlan master br1_$vlan + defer ip link set dev $intf.$vlan nomaster + ip link set dev $intf.$vlan up + defer ip link set dev $intf.$vlan up done done for intf in $swp2 $swp3 $swp5; do for vlan in 10 11; do vlan_create $intf $vlan + defer vlan_destroy $intf $vlan + ip link set dev $intf.$vlan master br2_$vlan + defer ip link set dev $intf.$vlan nomaster + ip link set dev $intf.$vlan up + defer ip link set dev $intf.$vlan up done done @@ -199,51 +211,27 @@ switch_create() done for intf in $swp3 $swp4; do - tc qdisc replace dev $intf root handle 1: tbf rate 1gbit \ + tc qdisc replace dev $intf root handle 1: tbf rate 200mbit \ burst 128K limit 1G + defer tc qdisc del dev $intf root handle 1: done ip link set dev br1_10 up + defer ip link set dev br1_10 down + ip link set dev br1_11 up + defer ip link set dev br1_11 down + ip link set dev br2_10 up + defer ip link set dev br2_10 down + ip link set dev br2_11 up + defer ip link set dev br2_11 down local size=$(devlink_pool_size_thtype 0 | cut -d' ' -f 1) devlink_port_pool_th_save $swp3 8 devlink_port_pool_th_set $swp3 8 $size -} - -switch_destroy() -{ - local intf - local vlan - - devlink_port_pool_th_restore $swp3 8 - - ip link set dev br2_11 down - ip link set dev br2_10 down - ip link set dev br1_11 down - ip link set dev br1_10 down - - for intf in $swp4 $swp3; do - tc qdisc del dev $intf root handle 1: - done - - for intf in $swp5 $swp3 $swp2 $swp4 $swp1; do - for vlan in 11 10; do - ip link set dev $intf.$vlan down - ip link set dev $intf.$vlan nomaster - vlan_destroy $intf $vlan - done - - mtu_restore $intf - ip link set dev $intf down - done - - ip link del dev br2_11 - ip link del dev br2_10 - ip link del dev br1_11 - ip link del dev br1_10 + defer devlink_port_pool_th_restore $swp3 8 } setup_prepare() @@ -263,6 +251,7 @@ setup_prepare() h3_mac=$(mac_get $h3) vrf_prepare + defer vrf_cleanup h1_create h2_create @@ -270,18 +259,6 @@ setup_prepare() switch_create } -cleanup() -{ - pre_cleanup - - switch_destroy - h3_destroy - h2_destroy - h1_destroy - - vrf_cleanup -} - ping_ipv4() { ping_test $h1.10 $(ipaddr 3 10) " from host 1, vlan 10" @@ -372,6 +349,7 @@ build_backlog() local i=0 while :; do + sleep 1 local cur=$(busywait 1100 until_counter_is "> $cur" \ get_qdisc_backlog $vlan) local diff=$((size - cur)) @@ -449,6 +427,7 @@ __do_ecn_test() start_tcp_traffic $h1.$vlan $(ipaddr 1 $vlan) $(ipaddr 3 $vlan) \ $h3_mac tos=0x01 + defer stop_traffic_sleep $! sleep 1 ecn_test_common "$name" "$get_nmarked" $vlan $limit @@ -460,9 +439,6 @@ __do_ecn_test() build_backlog $vlan $((2 * limit)) udp >/dev/null check_fail $? "UDP traffic went into backlog instead of being early-dropped" log_test "TC $((vlan - 10)): $name backlog > limit: UDP early-dropped" - - stop_traffic - sleep 1 } do_ecn_test() @@ -470,7 +446,8 @@ do_ecn_test() local vlan=$1; shift local limit=$1; shift - __do_ecn_test get_nmarked "$vlan" "$limit" + in_defer_scope \ + __do_ecn_test get_nmarked "$vlan" "$limit" } do_ecn_test_perband() @@ -479,10 +456,11 @@ do_ecn_test_perband() local limit=$1; shift mlxsw_only_on_spectrum 3+ || return - __do_ecn_test get_qdisc_nmarked "$vlan" "$limit" "per-band ECN" + in_defer_scope \ + __do_ecn_test get_qdisc_nmarked "$vlan" "$limit" "per-band ECN" } -do_ecn_nodrop_test() +__do_ecn_nodrop_test() { local vlan=$1; shift local limit=$1; shift @@ -490,6 +468,7 @@ do_ecn_nodrop_test() start_tcp_traffic $h1.$vlan $(ipaddr 1 $vlan) $(ipaddr 3 $vlan) \ $h3_mac tos=0x01 + defer stop_traffic_sleep $! sleep 1 ecn_test_common "$name" get_nmarked $vlan $limit @@ -501,12 +480,15 @@ do_ecn_nodrop_test() build_backlog $vlan $((2 * limit)) udp >/dev/null check_err $? "UDP traffic was early-dropped instead of getting into backlog" log_test "TC $((vlan - 10)): $name backlog > limit: UDP not dropped" +} - stop_traffic - sleep 1 +do_ecn_nodrop_test() +{ + in_defer_scope \ + __do_ecn_nodrop_test "$@" } -do_red_test() +__do_red_test() { local vlan=$1; shift local limit=$1; shift @@ -517,6 +499,7 @@ do_red_test() # is above limit. start_tcp_traffic $h1.$vlan $(ipaddr 1 $vlan) $(ipaddr 3 $vlan) \ $h3_mac tos=0x01 + defer stop_traffic_sleep $! # Pushing below the queue limit should work. RET=0 @@ -532,17 +515,21 @@ do_red_test() check_fail $? "Traffic went into backlog instead of being early-dropped" pct=$(check_marking get_nmarked $vlan "== 0") check_err $? "backlog $backlog / $limit Got $pct% marked packets, expected == 0." + backlog=$(get_qdisc_backlog $vlan) local diff=$((limit - backlog)) pct=$((100 * diff / limit)) - ((-10 <= pct && pct <= 10)) - check_err $? "backlog $backlog / $limit expected <= 10% distance" + ((-15 <= pct && pct <= 15)) + check_err $? "backlog $backlog / $limit expected <= 15% distance" log_test "TC $((vlan - 10)): RED backlog > limit" +} - stop_traffic - sleep 1 +do_red_test() +{ + in_defer_scope \ + __do_red_test "$@" } -do_mc_backlog_test() +__do_mc_backlog_test() { local vlan=$1; shift local limit=$1; shift @@ -552,7 +539,10 @@ do_mc_backlog_test() RET=0 start_tcp_traffic $h1.$vlan $(ipaddr 1 $vlan) $(ipaddr 3 $vlan) bc + defer stop_traffic_sleep $! + start_tcp_traffic $h2.$vlan $(ipaddr 2 $vlan) $(ipaddr 3 $vlan) bc + defer stop_traffic_sleep $! qbl=$(busywait 5000 until_counter_is ">= 500000" \ get_qdisc_backlog $vlan) @@ -565,13 +555,16 @@ do_mc_backlog_test() get_mc_transmit_queue $vlan) check_err $? "MC backlog reported by qdisc not visible in ethtool" - stop_traffic - stop_traffic - log_test "TC $((vlan - 10)): Qdisc reports MC backlog" } -do_mark_test() +do_mc_backlog_test() +{ + in_defer_scope \ + __do_mc_backlog_test "$@" +} + +__do_mark_test() { local vlan=$1; shift local limit=$1; shift @@ -586,6 +579,7 @@ do_mark_test() start_tcp_traffic $h1.$vlan $(ipaddr 1 $vlan) $(ipaddr 3 $vlan) \ $h3_mac tos=0x01 + defer stop_traffic_sleep $! # Create a bit of a backlog and observe no mirroring due to marks. qevent_rule_install_$subtest @@ -600,7 +594,7 @@ do_mark_test() # Above limit, everything should be mirrored, we should see lots of # packets. build_backlog $vlan $((3 * limit / 2)) tcp tos=0x01 >/dev/null - busywait_for_counter 1100 +10000 \ + busywait_for_counter 1100 +2500 \ $fetch_counter > /dev/null check_err_fail "$should_fail" $? "ECN-marked packets $subtest'd" @@ -615,12 +609,15 @@ do_mark_test() else log_test "TC $((vlan - 10)): marked packets $subtest'd" fi +} - stop_traffic - sleep 1 +do_mark_test() +{ + in_defer_scope \ + __do_mark_test "$@" } -do_drop_test() +__do_drop_test() { local vlan=$1; shift local limit=$1; shift @@ -635,6 +632,7 @@ do_drop_test() RET=0 start_traffic $h1.$vlan $(ipaddr 1 $vlan) $(ipaddr 3 $vlan) $h3_mac + defer stop_traffic_sleep $! # Create a bit of a backlog and observe no mirroring due to drops. qevent_rule_install_$subtest @@ -651,25 +649,30 @@ do_drop_test() build_backlog $vlan $((3 * limit / 2)) udp >/dev/null base=$($fetch_counter) - send_packets $vlan udp 11 + send_packets $vlan udp 100 - now=$(busywait 1100 until_counter_is ">= $((base + 10))" $fetch_counter) - check_err $? "Dropped packets not observed: 11 expected, $((now - base)) seen" + now=$(busywait 1100 until_counter_is ">= $((base + 95))" $fetch_counter) + check_err $? "${trigger}ped packets not observed: 100 expected, $((now - base)) seen" # When no extra traffic is injected, there should be no mirroring. - busywait 1100 until_counter_is ">= $((base + 20))" $fetch_counter >/dev/null + busywait 1100 until_counter_is ">= $((base + 110))" \ + $fetch_counter >/dev/null check_fail $? "Spurious packets observed" # When the rule is uninstalled, there should be no mirroring. qevent_rule_uninstall_$subtest - send_packets $vlan udp 11 - busywait 1100 until_counter_is ">= $((base + 20))" $fetch_counter >/dev/null - check_fail $? "Spurious packets observed after uninstall" + send_packets $vlan udp 100 + now=$(busywait 1100 until_counter_is ">= $((base + 110))" \ + $fetch_counter) + check_fail $? "$((now - base)) spurious packets observed after uninstall" log_test "TC $((vlan - 10)): ${trigger}ped packets $subtest'd" +} - stop_traffic - sleep 1 +do_drop_test() +{ + in_defer_scope \ + __do_drop_test "$@" } qevent_rule_install_mirror() diff --git a/tools/testing/selftests/drivers/net/mlxsw/sch_red_ets.sh b/tools/testing/selftests/drivers/net/mlxsw/sch_red_ets.sh index 8ecddafa79b3..8902a115d9cd 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/sch_red_ets.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/sch_red_ets.sh @@ -20,8 +20,8 @@ source sch_red_core.sh # $BACKLOG2 are far enough not to overlap, so that we can assume that if we do # see (do not see) marking, it is actually due to the configuration of that one # TC, and not due to configuration of the other TC leaking over. -BACKLOG1=200000 -BACKLOG2=500000 +BACKLOG1=400000 +BACKLOG2=1000000 install_root_qdisc() { @@ -35,7 +35,7 @@ install_qdisc_tc0() tc qdisc add dev $swp3 parent 10:8 handle 108: red \ limit 1000000 min $BACKLOG1 max $((BACKLOG1 + 1)) \ - probability 1.0 avpkt 8000 burst 38 "${args[@]}" + probability 1.0 avpkt 8000 burst 51 "${args[@]}" } install_qdisc_tc1() @@ -44,7 +44,7 @@ install_qdisc_tc1() tc qdisc add dev $swp3 parent 10:7 handle 107: red \ limit 1000000 min $BACKLOG2 max $((BACKLOG2 + 1)) \ - probability 1.0 avpkt 8000 burst 63 "${args[@]}" + probability 1.0 avpkt 8000 burst 126 "${args[@]}" } install_qdisc() @@ -80,36 +80,34 @@ uninstall_qdisc() ecn_test() { install_qdisc ecn + defer uninstall_qdisc do_ecn_test 10 $BACKLOG1 do_ecn_test 11 $BACKLOG2 - - uninstall_qdisc } ecn_test_perband() { install_qdisc ecn + defer uninstall_qdisc do_ecn_test_perband 10 $BACKLOG1 do_ecn_test_perband 11 $BACKLOG2 - - uninstall_qdisc } ecn_nodrop_test() { install_qdisc ecn nodrop + defer uninstall_qdisc do_ecn_nodrop_test 10 $BACKLOG1 do_ecn_nodrop_test 11 $BACKLOG2 - - uninstall_qdisc } red_test() { install_qdisc + defer uninstall_qdisc # Make sure that we get the non-zero value if there is any. local cur=$(busywait 1100 until_counter_is "> 0" \ @@ -120,50 +118,44 @@ red_test() do_red_test 10 $BACKLOG1 do_red_test 11 $BACKLOG2 - - uninstall_qdisc } mc_backlog_test() { install_qdisc + defer uninstall_qdisc # Note that the backlog numbers here do not correspond to RED # configuration, but are arbitrary. do_mc_backlog_test 10 $BACKLOG1 do_mc_backlog_test 11 $BACKLOG2 - - uninstall_qdisc } red_mirror_test() { install_qdisc qevent early_drop block 10 + defer uninstall_qdisc do_drop_mirror_test 10 $BACKLOG1 early_drop do_drop_mirror_test 11 $BACKLOG2 early_drop - - uninstall_qdisc } red_trap_test() { install_qdisc qevent early_drop block 10 + defer uninstall_qdisc do_drop_trap_test 10 $BACKLOG1 early_drop do_drop_trap_test 11 $BACKLOG2 early_drop - - uninstall_qdisc } ecn_mirror_test() { install_qdisc ecn qevent mark block 10 + defer uninstall_qdisc do_mark_mirror_test 10 $BACKLOG1 do_mark_mirror_test 11 $BACKLOG2 - - uninstall_qdisc } bail_on_lldpad "configure DCB" "configure Qdiscs" diff --git a/tools/testing/selftests/drivers/net/mlxsw/sch_red_root.sh b/tools/testing/selftests/drivers/net/mlxsw/sch_red_root.sh index 159108d02895..e9043771787b 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/sch_red_root.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/sch_red_root.sh @@ -32,45 +32,51 @@ uninstall_qdisc() ecn_test() { install_qdisc ecn + defer uninstall_qdisc + do_ecn_test 10 $BACKLOG - uninstall_qdisc } ecn_test_perband() { install_qdisc ecn + defer uninstall_qdisc + do_ecn_test_perband 10 $BACKLOG - uninstall_qdisc } ecn_nodrop_test() { install_qdisc ecn nodrop + defer uninstall_qdisc + do_ecn_nodrop_test 10 $BACKLOG - uninstall_qdisc } red_test() { install_qdisc + defer uninstall_qdisc + do_red_test 10 $BACKLOG - uninstall_qdisc } mc_backlog_test() { install_qdisc + defer uninstall_qdisc + # Note that the backlog value here does not correspond to RED # configuration, but is arbitrary. do_mc_backlog_test 10 $BACKLOG - uninstall_qdisc } red_mirror_test() { install_qdisc qevent early_drop block 10 + defer uninstall_qdisc + do_drop_mirror_test 10 $BACKLOG - uninstall_qdisc } bail_on_lldpad "configure DCB" "configure Qdiscs" diff --git a/tools/testing/selftests/drivers/net/mlxsw/sharedbuffer.sh b/tools/testing/selftests/drivers/net/mlxsw/sharedbuffer.sh index 0c47faff9274..c068e6c2a580 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/sharedbuffer.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/sharedbuffer.sh @@ -22,20 +22,34 @@ SB_ITC=0 h1_create() { simple_if_init $h1 192.0.1.1/24 + tc qdisc add dev $h1 clsact + + # Add egress filter on $h1 that will guarantee that the packet sent, + # will be the only packet being passed to the device. + tc filter add dev $h1 egress pref 2 handle 102 matchall action drop } h1_destroy() { + tc filter del dev $h1 egress pref 2 handle 102 matchall action drop + tc qdisc del dev $h1 clsact simple_if_fini $h1 192.0.1.1/24 } h2_create() { simple_if_init $h2 192.0.1.2/24 + tc qdisc add dev $h2 clsact + + # Add egress filter on $h2 that will guarantee that the packet sent, + # will be the only packet being passed to the device. + tc filter add dev $h2 egress pref 1 handle 101 matchall action drop } h2_destroy() { + tc filter del dev $h2 egress pref 1 handle 101 matchall action drop + tc qdisc del dev $h2 clsact simple_if_fini $h2 192.0.1.2/24 } @@ -101,6 +115,11 @@ port_pool_test() local exp_max_occ=$(devlink_cell_size_get) local max_occ + tc filter add dev $h1 egress protocol ip pref 1 handle 101 flower \ + src_mac $h1mac dst_mac $h2mac \ + src_ip 192.0.1.1 dst_ip 192.0.1.2 \ + action pass + devlink sb occupancy clearmax $DEVLINK_DEV $MZ $h1 -c 1 -p 10 -a $h1mac -b $h2mac -A 192.0.1.1 -B 192.0.1.2 \ @@ -109,11 +128,6 @@ port_pool_test() devlink sb occupancy snapshot $DEVLINK_DEV RET=0 - max_occ=$(sb_occ_pool_check $dl_port1 $SB_POOL_ING $exp_max_occ) - check_err $? "Expected iPool($SB_POOL_ING) max occupancy to be $exp_max_occ, but got $max_occ" - log_test "physical port's($h1) ingress pool" - - RET=0 max_occ=$(sb_occ_pool_check $dl_port2 $SB_POOL_ING $exp_max_occ) check_err $? "Expected iPool($SB_POOL_ING) max occupancy to be $exp_max_occ, but got $max_occ" log_test "physical port's($h2) ingress pool" @@ -122,6 +136,11 @@ port_pool_test() max_occ=$(sb_occ_pool_check $cpu_dl_port $SB_POOL_EGR_CPU $exp_max_occ) check_err $? "Expected ePool($SB_POOL_EGR_CPU) max occupancy to be $exp_max_occ, but got $max_occ" log_test "CPU port's egress pool" + + tc filter del dev $h1 egress protocol ip pref 1 handle 101 flower \ + src_mac $h1mac dst_mac $h2mac \ + src_ip 192.0.1.1 dst_ip 192.0.1.2 \ + action pass } port_tc_ip_test() @@ -129,6 +148,11 @@ port_tc_ip_test() local exp_max_occ=$(devlink_cell_size_get) local max_occ + tc filter add dev $h1 egress protocol ip pref 1 handle 101 flower \ + src_mac $h1mac dst_mac $h2mac \ + src_ip 192.0.1.1 dst_ip 192.0.1.2 \ + action pass + devlink sb occupancy clearmax $DEVLINK_DEV $MZ $h1 -c 1 -p 10 -a $h1mac -b $h2mac -A 192.0.1.1 -B 192.0.1.2 \ @@ -139,17 +163,17 @@ port_tc_ip_test() RET=0 max_occ=$(sb_occ_itc_check $dl_port2 $SB_ITC $exp_max_occ) check_err $? "Expected ingress TC($SB_ITC) max occupancy to be $exp_max_occ, but got $max_occ" - log_test "physical port's($h1) ingress TC - IP packet" - - RET=0 - max_occ=$(sb_occ_itc_check $dl_port2 $SB_ITC $exp_max_occ) - check_err $? "Expected ingress TC($SB_ITC) max occupancy to be $exp_max_occ, but got $max_occ" log_test "physical port's($h2) ingress TC - IP packet" RET=0 max_occ=$(sb_occ_etc_check $cpu_dl_port $SB_ITC_CPU_IP $exp_max_occ) check_err $? "Expected egress TC($SB_ITC_CPU_IP) max occupancy to be $exp_max_occ, but got $max_occ" log_test "CPU port's egress TC - IP packet" + + tc filter del dev $h1 egress protocol ip pref 1 handle 101 flower \ + src_mac $h1mac dst_mac $h2mac \ + src_ip 192.0.1.1 dst_ip 192.0.1.2 \ + action pass } port_tc_arp_test() @@ -157,6 +181,9 @@ port_tc_arp_test() local exp_max_occ=$(devlink_cell_size_get) local max_occ + tc filter add dev $h1 egress protocol arp pref 1 handle 101 flower \ + src_mac $h1mac action pass + devlink sb occupancy clearmax $DEVLINK_DEV $MZ $h1 -c 1 -p 10 -a $h1mac -A 192.0.1.1 -t arp -q @@ -166,17 +193,15 @@ port_tc_arp_test() RET=0 max_occ=$(sb_occ_itc_check $dl_port2 $SB_ITC $exp_max_occ) check_err $? "Expected ingress TC($SB_ITC) max occupancy to be $exp_max_occ, but got $max_occ" - log_test "physical port's($h1) ingress TC - ARP packet" - - RET=0 - max_occ=$(sb_occ_itc_check $dl_port2 $SB_ITC $exp_max_occ) - check_err $? "Expected ingress TC($SB_ITC) max occupancy to be $exp_max_occ, but got $max_occ" log_test "physical port's($h2) ingress TC - ARP packet" RET=0 max_occ=$(sb_occ_etc_check $cpu_dl_port $SB_ITC_CPU_ARP $exp_max_occ) check_err $? "Expected egress TC($SB_ITC_IP2ME) max occupancy to be $exp_max_occ, but got $max_occ" log_test "CPU port's egress TC - ARP packet" + + tc filter del dev $h1 egress protocol arp pref 1 handle 101 flower \ + src_mac $h1mac action pass } setup_prepare() diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh index a88d8a8c85f2..899b6892603f 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh @@ -47,7 +47,6 @@ for current_test in ${TESTS:-$ALL_TESTS}; do RET=0 target=$(${current_test}_get_target "$should_fail") if ((target == 0)); then - log_test_skip "'$current_test' should_fail=$should_fail test" continue fi diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh index 31252bc8775e..4994bea5daf8 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh @@ -11,7 +11,7 @@ ALL_TESTS="single_mask_test identical_filters_test two_masks_test \ multiple_masks_test ctcam_edge_cases_test delta_simple_test \ delta_two_masks_one_key_test delta_simple_rehash_test \ bloom_simple_test bloom_complex_test bloom_delta_test \ - max_erp_entries_test max_group_size_test" + max_erp_entries_test max_group_size_test collision_test" NUM_NETIFS=2 source $lib_dir/lib.sh source $lib_dir/tc_common.sh @@ -457,7 +457,7 @@ delta_two_masks_one_key_test() { # If 2 keys are the same and only differ in mask in a way that # they belong under the same ERP (second is delta of the first), - # there should be no C-TCAM spill. + # there should be C-TCAM spill. RET=0 @@ -474,8 +474,8 @@ delta_two_masks_one_key_test() tp_record "mlxsw:*" "tc filter add dev $h2 ingress protocol ip \ pref 2 handle 102 flower $tcflags dst_ip 192.0.2.2 \ action drop" - tp_check_hits "mlxsw:mlxsw_sp_acl_atcam_entry_add_ctcam_spill" 0 - check_err $? "incorrect C-TCAM spill while inserting the second rule" + tp_check_hits "mlxsw:mlxsw_sp_acl_atcam_entry_add_ctcam_spill" 1 + check_err $? "C-TCAM spill did not happen while inserting the second rule" $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ -t ip -q @@ -1087,6 +1087,53 @@ max_group_size_test() log_test "max ACL group size test ($tcflags). max size $max_size" } +collision_test() +{ + # Filters cannot share an eRP if in the common unmasked part (i.e., + # without the delta bits) they have the same values. If the driver does + # not prevent such configuration (by spilling into the C-TCAM), then + # multiple entries will be present in the device with the same key, + # leading to collisions and a reduced scale. + # + # Create such a scenario and make sure all the filters are successfully + # added. + + RET=0 + + local ret + + if [[ "$tcflags" != "skip_sw" ]]; then + return 0; + fi + + # Add a single dst_ip/24 filter and multiple dst_ip/32 filters that all + # have the same values in the common unmasked part (dst_ip/24). + + tc filter add dev $h2 ingress pref 1 proto ipv4 handle 101 \ + flower $tcflags dst_ip 198.51.100.0/24 \ + action drop + + for i in {0..255}; do + tc filter add dev $h2 ingress pref 2 proto ipv4 \ + handle $((102 + i)) \ + flower $tcflags dst_ip 198.51.100.${i}/32 \ + action drop + ret=$? + [[ $ret -ne 0 ]] && break + done + + check_err $ret "failed to add all the filters" + + for i in {255..0}; do + tc filter del dev $h2 ingress pref 2 proto ipv4 \ + handle $((102 + i)) flower + done + + tc filter del dev $h2 ingress pref 1 proto ipv4 handle 101 flower + + log_test "collision test ($tcflags)" +} + setup_prepare() { h1=${NETIFS[p1]} diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh index f981c957f097..482ebb744eba 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh @@ -52,7 +52,6 @@ for current_test in ${TESTS:-$ALL_TESTS}; do RET=0 target=$(${current_test}_get_target "$should_fail") if ((target == 0)); then - log_test_skip "'$current_test' [$profile] should_fail=$should_fail test" continue fi ${current_test}_setup_prepare diff --git a/tools/testing/selftests/drivers/net/mlxsw/tc_sample.sh b/tools/testing/selftests/drivers/net/mlxsw/tc_sample.sh index 83a0210e7544..bc7ea2df49fb 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/tc_sample.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/tc_sample.sh @@ -218,7 +218,7 @@ psample_capture_start() psample_capture_stop() { - { kill %% && wait %%; } 2>/dev/null + kill_process %% } __tc_sample_rate_test() @@ -499,7 +499,7 @@ tc_sample_md_out_tc_occ_test() backlog=$(tc -j -p -s qdisc show dev $rp2 | jq '.[0]["backlog"]') # Kill mausezahn. - { kill %% && wait %%; } 2>/dev/null + kill_process %% psample_capture_stop diff --git a/tools/testing/selftests/drivers/net/napi_id.py b/tools/testing/selftests/drivers/net/napi_id.py new file mode 100755 index 000000000000..356bac46ba04 --- /dev/null +++ b/tools/testing/selftests/drivers/net/napi_id.py @@ -0,0 +1,23 @@ +#!/usr/bin/env python3 +# SPDX-License-Identifier: GPL-2.0 + +from lib.py import ksft_run, ksft_exit +from lib.py import ksft_eq, NetDrvEpEnv +from lib.py import bkg, cmd, rand_port, NetNSEnter + +def test_napi_id(cfg) -> None: + port = rand_port() + listen_cmd = f"{cfg.test_dir}/napi_id_helper {cfg.addr_v['4']} {port}" + + with bkg(listen_cmd, ksft_wait=3) as server: + cmd(f"echo a | socat - TCP:{cfg.addr_v['4']}:{port}", host=cfg.remote, shell=True) + + ksft_eq(0, server.ret) + +def main() -> None: + with NetDrvEpEnv(__file__) as cfg: + ksft_run([test_napi_id], args=(cfg,)) + ksft_exit() + +if __name__ == "__main__": + main() diff --git a/tools/testing/selftests/drivers/net/napi_id_helper.c b/tools/testing/selftests/drivers/net/napi_id_helper.c new file mode 100644 index 000000000000..eecd610c2109 --- /dev/null +++ b/tools/testing/selftests/drivers/net/napi_id_helper.c @@ -0,0 +1,83 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <errno.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <unistd.h> +#include <arpa/inet.h> +#include <sys/socket.h> + +#include "../../net/lib/ksft.h" + +int main(int argc, char *argv[]) +{ + struct sockaddr_in address; + unsigned int napi_id; + unsigned int port; + socklen_t optlen; + char buf[1024]; + int opt = 1; + int server; + int client; + int ret; + + server = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP); + if (server < 0) { + perror("socket creation failed"); + if (errno == EAFNOSUPPORT) + return -1; + return 1; + } + + port = atoi(argv[2]); + + if (setsockopt(server, SOL_SOCKET, SO_REUSEADDR, &opt, sizeof(opt))) { + perror("setsockopt"); + return 1; + } + + address.sin_family = AF_INET; + inet_pton(AF_INET, argv[1], &address.sin_addr); + address.sin_port = htons(port); + + if (bind(server, (struct sockaddr *)&address, sizeof(address)) < 0) { + perror("bind failed"); + return 1; + } + + if (listen(server, 1) < 0) { + perror("listen"); + return 1; + } + + ksft_ready(); + + client = accept(server, NULL, 0); + if (client < 0) { + perror("accept"); + return 1; + } + + optlen = sizeof(napi_id); + ret = getsockopt(client, SOL_SOCKET, SO_INCOMING_NAPI_ID, &napi_id, + &optlen); + if (ret != 0) { + perror("getsockopt"); + return 1; + } + + read(client, buf, 1024); + + ksft_wait(); + + if (napi_id == 0) { + fprintf(stderr, "napi ID is 0\n"); + return 1; + } + + close(client); + close(server); + + return 0; +} diff --git a/tools/testing/selftests/drivers/net/netcons_basic.sh b/tools/testing/selftests/drivers/net/netcons_basic.sh new file mode 100755 index 000000000000..fe765da498e8 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netcons_basic.sh @@ -0,0 +1,52 @@ +#!/usr/bin/env bash +# SPDX-License-Identifier: GPL-2.0 + +# This test creates two netdevsim virtual interfaces, assigns one of them (the +# "destination interface") to a new namespace, and assigns IP addresses to both +# interfaces. +# +# It listens on the destination interface using socat and configures a dynamic +# target on netconsole, pointing to the destination IP address. +# +# Finally, it checks whether the message was received properly on the +# destination interface. Note that this test may pollute the kernel log buffer +# (dmesg) and relies on dynamic configuration and namespaces being configured. +# +# Author: Breno Leitao <leitao@debian.org> + +set -euo pipefail + +SCRIPTDIR=$(dirname "$(readlink -e "${BASH_SOURCE[0]}")") + +source "${SCRIPTDIR}"/lib/sh/lib_netcons.sh + +modprobe netdevsim 2> /dev/null || true +modprobe netconsole 2> /dev/null || true + +# The content of kmsg will be save to the following file +OUTPUT_FILE="/tmp/${TARGET}" + +# Check for basic system dependency and exit if not found +check_for_dependencies +# Set current loglevel to KERN_INFO(6), and default to KERN_NOTICE(5) +echo "6 5" > /proc/sys/kernel/printk +# Remove the namespace, interfaces and netconsole target on exit +trap cleanup EXIT +# Create one namespace and two interfaces +set_network +# Create a dynamic target for netconsole +create_dynamic_target +# Set userdata "key" with the "value" value +set_user_data +# Listed for netconsole port inside the namespace and destination interface +listen_port_and_save_to "${OUTPUT_FILE}" & +# Wait for socat to start and listen to the port. +wait_local_port_listen "${NAMESPACE}" "${PORT}" udp +# Send the message +echo "${MSG}: ${TARGET}" > /dev/kmsg +# Wait until socat saves the file to disk +busywait "${BUSYWAIT_TIMEOUT}" test -s "${OUTPUT_FILE}" + +# Make sure the message was received in the dst part +# and exit +validate_result "${OUTPUT_FILE}" diff --git a/tools/testing/selftests/drivers/net/netcons_fragmented_msg.sh b/tools/testing/selftests/drivers/net/netcons_fragmented_msg.sh new file mode 100755 index 000000000000..4a71e01a230c --- /dev/null +++ b/tools/testing/selftests/drivers/net/netcons_fragmented_msg.sh @@ -0,0 +1,122 @@ +#!/usr/bin/env bash +# SPDX-License-Identifier: GPL-2.0 + +# Test netconsole's message fragmentation functionality. +# +# When a message exceeds the maximum packet size, netconsole splits it into +# multiple fragments for transmission. This test verifies: +# - Correct fragmentation of large messages +# - Proper reassembly of fragments at the receiver +# - Preservation of userdata across fragments +# - Behavior with and without kernel release version appending +# +# Author: Breno Leitao <leitao@debian.org> + +set -euo pipefail + +SCRIPTDIR=$(dirname "$(readlink -e "${BASH_SOURCE[0]}")") + +source "${SCRIPTDIR}"/lib/sh/lib_netcons.sh + +modprobe netdevsim 2> /dev/null || true +modprobe netconsole 2> /dev/null || true + +# The content of kmsg will be save to the following file +OUTPUT_FILE="/tmp/${TARGET}" + +# set userdata to a long value. In this case, it is "1-2-3-4...50-" +USERDATA_VALUE=$(printf -- '%.2s-' {1..60}) + +# Convert the header string in a regexp, so, we can remove +# the second header as well. +# A header looks like "13,468,514729715,-,ncfrag=0/1135;". If +# release is appended, you might find something like:L +# "6.13.0-04048-g4f561a87745a,13,468,514729715,-,ncfrag=0/1135;" +function header_to_regex() { + # header is everything before ; + local HEADER="${1}" + REGEX=$(echo "${HEADER}" | cut -d'=' -f1) + echo "${REGEX}=[0-9]*\/[0-9]*;" +} + +# We have two headers in the message. Remove both to get the full message, +# and extract the full message. +function extract_msg() { + local MSGFILE="${1}" + # Extract the header, which is the very first thing that arrives in the + # first list. + HEADER=$(sed -n '1p' "${MSGFILE}" | cut -d';' -f1) + HEADER_REGEX=$(header_to_regex "${HEADER}") + + # Remove the two headers from the received message + # This will return the message without any header, similarly to what + # was sent. + sed "s/""${HEADER_REGEX}""//g" "${MSGFILE}" +} + +# Validate the message, which has two messages glued together. +# unwrap them to make sure all the characters were transmitted. +# File will look like the following: +# 13,468,514729715,-,ncfrag=0/1135;<message> +# key=<part of key>-13,468,514729715,-,ncfrag=967/1135;<rest of the key> +function validate_fragmented_result() { + # Discard the netconsole headers, and assemble the full message + RCVMSG=$(extract_msg "${1}") + + # check for the main message + if ! echo "${RCVMSG}" | grep -q "${MSG}"; then + echo "Message body doesn't match." >&2 + echo "msg received=" "${RCVMSG}" >&2 + exit "${ksft_fail}" + fi + + # check userdata + if ! echo "${RCVMSG}" | grep -q "${USERDATA_VALUE}"; then + echo "message userdata doesn't match" >&2 + echo "msg received=" "${RCVMSG}" >&2 + exit "${ksft_fail}" + fi + # test passed. hooray +} + +# Check for basic system dependency and exit if not found +check_for_dependencies +# Set current loglevel to KERN_INFO(6), and default to KERN_NOTICE(5) +echo "6 5" > /proc/sys/kernel/printk +# Remove the namespace, interfaces and netconsole target on exit +trap cleanup EXIT +# Create one namespace and two interfaces +set_network +# Create a dynamic target for netconsole +create_dynamic_target +# Set userdata "key" with the "value" value +set_user_data + + +# TEST 1: Send message and userdata. They will fragment +# ======= +MSG=$(printf -- 'MSG%.3s=' {1..150}) + +# Listen for netconsole port inside the namespace and destination interface +listen_port_and_save_to "${OUTPUT_FILE}" & +# Wait for socat to start and listen to the port. +wait_local_port_listen "${NAMESPACE}" "${PORT}" udp +# Send the message +echo "${MSG}: ${TARGET}" > /dev/kmsg +# Wait until socat saves the file to disk +busywait "${BUSYWAIT_TIMEOUT}" test -s "${OUTPUT_FILE}" +# Check if the message was not corrupted +validate_fragmented_result "${OUTPUT_FILE}" + +# TEST 2: Test with smaller message, and without release appended +# ======= +MSG=$(printf -- 'FOOBAR%.3s=' {1..100}) +# Let's disable release and test again. +disable_release_append + +listen_port_and_save_to "${OUTPUT_FILE}" & +wait_local_port_listen "${NAMESPACE}" "${PORT}" udp +echo "${MSG}: ${TARGET}" > /dev/kmsg +busywait "${BUSYWAIT_TIMEOUT}" test -s "${OUTPUT_FILE}" +validate_fragmented_result "${OUTPUT_FILE}" +exit "${ksft_pass}" diff --git a/tools/testing/selftests/drivers/net/netcons_overflow.sh b/tools/testing/selftests/drivers/net/netcons_overflow.sh new file mode 100755 index 000000000000..29bad56448a2 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netcons_overflow.sh @@ -0,0 +1,67 @@ +#!/usr/bin/env bash +# SPDX-License-Identifier: GPL-2.0 + +# This test verifies that users can successfully create up to +# MAX_USERDATA_ITEMS userdata entries without encountering any failures. +# +# Additionally, it tests for expected failure when attempting to exceed this +# maximum limit. +# +# Author: Breno Leitao <leitao@debian.org> + +set -euo pipefail + +SCRIPTDIR=$(dirname "$(readlink -e "${BASH_SOURCE[0]}")") + +source "${SCRIPTDIR}"/lib/sh/lib_netcons.sh +# This is coming from netconsole code. Check for it in drivers/net/netconsole.c +MAX_USERDATA_ITEMS=16 + +# Function to create userdata entries +function create_userdata_max_entries() { + # All these keys should be created without any error + for i in $(seq $MAX_USERDATA_ITEMS) + do + # USERDATA_KEY is used by set_user_data + USERDATA_KEY="key"${i} + set_user_data + done +} + +# Function to verify the entry limit +function verify_entry_limit() { + # Allowing the test to fail without exiting, since the next command + # will fail + set +e + mkdir "${NETCONS_PATH}/userdata/key_that_will_fail" 2> /dev/null + ret="$?" + set -e + if [ "$ret" -eq 0 ]; + then + echo "Adding more than ${MAX_USERDATA_ITEMS} entries in userdata should fail, but it didn't" >&2 + ls "${NETCONS_PATH}/userdata/" >&2 + exit "${ksft_fail}" + fi +} + +# ========== # +# Start here # +# ========== # + +modprobe netdevsim 2> /dev/null || true +modprobe netconsole 2> /dev/null || true + +# Check for basic system dependency and exit if not found +check_for_dependencies + +# Remove the namespace, interfaces and netconsole target on exit +trap cleanup EXIT +# Create one namespace and two interfaces +set_network +# Create a dynamic target for netconsole +create_dynamic_target +# populate the maximum number of supported keys in userdata +create_userdata_max_entries +# Verify an additional entry is not allowed +verify_entry_limit +exit "${ksft_pass}" diff --git a/tools/testing/selftests/drivers/net/netcons_sysdata.sh b/tools/testing/selftests/drivers/net/netcons_sysdata.sh new file mode 100755 index 000000000000..a737e377bf08 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netcons_sysdata.sh @@ -0,0 +1,242 @@ +#!/usr/bin/env bash +# SPDX-License-Identifier: GPL-2.0 + +# A test that makes sure that sysdata runtime CPU data is properly set +# when a message is sent. +# +# There are 3 different tests, every time sent using a random CPU. +# - Test #1 +# * Only enable cpu_nr sysdata feature. +# - Test #2 +# * Keep cpu_nr sysdata feature enable and enable userdata. +# - Test #3 +# * keep userdata enabled, and disable sysdata cpu_nr feature. +# +# Author: Breno Leitao <leitao@debian.org> + +set -euo pipefail + +SCRIPTDIR=$(dirname "$(readlink -e "${BASH_SOURCE[0]}")") + +source "${SCRIPTDIR}"/lib/sh/lib_netcons.sh + +# Enable the sysdata cpu_nr feature +function set_cpu_nr() { + if [[ ! -f "${NETCONS_PATH}/userdata/cpu_nr_enabled" ]] + then + echo "Populate CPU configfs path not available in ${NETCONS_PATH}/userdata/cpu_nr_enabled" >&2 + exit "${ksft_skip}" + fi + + echo 1 > "${NETCONS_PATH}/userdata/cpu_nr_enabled" +} + +# Enable the taskname to be appended to sysdata +function set_taskname() { + if [[ ! -f "${NETCONS_PATH}/userdata/taskname_enabled" ]] + then + echo "Not able to enable taskname sysdata append. Configfs not available in ${NETCONS_PATH}/userdata/taskname_enabled" >&2 + exit "${ksft_skip}" + fi + + echo 1 > "${NETCONS_PATH}/userdata/taskname_enabled" +} + +# Enable the release to be appended to sysdata +function set_release() { + if [[ ! -f "${NETCONS_PATH}/userdata/release_enabled" ]] + then + echo "Not able to enable release sysdata append. Configfs not available in ${NETCONS_PATH}/userdata/release_enabled" >&2 + exit "${ksft_skip}" + fi + + echo 1 > "${NETCONS_PATH}/userdata/release_enabled" +} + +# Disable the sysdata cpu_nr feature +function unset_cpu_nr() { + echo 0 > "${NETCONS_PATH}/userdata/cpu_nr_enabled" +} + +# Once called, taskname=<..> will not be appended anymore +function unset_taskname() { + echo 0 > "${NETCONS_PATH}/userdata/taskname_enabled" +} + +function unset_release() { + echo 0 > "${NETCONS_PATH}/userdata/release_enabled" +} + +# Test if MSG contains sysdata +function validate_sysdata() { + # OUTPUT_FILE will contain something like: + # 6.11.1-0_fbk0_rc13_509_g30d75cea12f7,13,1822,115075213798,-;netconsole selftest: netcons_gtJHM + # userdatakey=userdatavalue + # cpu=X + # taskname=<taskname> + + # Echo is what this test uses to create the message. See runtest() + # function + SENDER="echo" + + if [ ! -f "$OUTPUT_FILE" ]; then + echo "FAIL: File was not generated." >&2 + exit "${ksft_fail}" + fi + + if ! grep -q "${MSG}" "${OUTPUT_FILE}"; then + echo "FAIL: ${MSG} not found in ${OUTPUT_FILE}" >&2 + cat "${OUTPUT_FILE}" >&2 + exit "${ksft_fail}" + fi + + # Check if cpu=XX exists in the file and matches the one used + # in taskset(1) + if ! grep -q "cpu=${CPU}\+" "${OUTPUT_FILE}"; then + echo "FAIL: 'cpu=${CPU}' not found in ${OUTPUT_FILE}" >&2 + cat "${OUTPUT_FILE}" >&2 + exit "${ksft_fail}" + fi + + if ! grep -q "taskname=${SENDER}" "${OUTPUT_FILE}"; then + echo "FAIL: 'taskname=echo' not found in ${OUTPUT_FILE}" >&2 + cat "${OUTPUT_FILE}" >&2 + exit "${ksft_fail}" + fi + + rm "${OUTPUT_FILE}" + pkill_socat +} + +function validate_release() { + RELEASE=$(uname -r) + + if [ ! -f "$OUTPUT_FILE" ]; then + echo "FAIL: File was not generated." >&2 + exit "${ksft_fail}" + fi + + if ! grep -q "release=${RELEASE}" "${OUTPUT_FILE}"; then + echo "FAIL: 'release=${RELEASE}' not found in ${OUTPUT_FILE}" >&2 + cat "${OUTPUT_FILE}" >&2 + exit "${ksft_fail}" + fi +} + +# Test if MSG content exists in OUTPUT_FILE but no `cpu=` and `taskname=` +# strings +function validate_no_sysdata() { + if [ ! -f "$OUTPUT_FILE" ]; then + echo "FAIL: File was not generated." >&2 + exit "${ksft_fail}" + fi + + if ! grep -q "${MSG}" "${OUTPUT_FILE}"; then + echo "FAIL: ${MSG} not found in ${OUTPUT_FILE}" >&2 + cat "${OUTPUT_FILE}" >&2 + exit "${ksft_fail}" + fi + + if grep -q "cpu=" "${OUTPUT_FILE}"; then + echo "FAIL: 'cpu= found in ${OUTPUT_FILE}" >&2 + cat "${OUTPUT_FILE}" >&2 + exit "${ksft_fail}" + fi + + if grep -q "taskname=" "${OUTPUT_FILE}"; then + echo "FAIL: 'taskname= found in ${OUTPUT_FILE}" >&2 + cat "${OUTPUT_FILE}" >&2 + exit "${ksft_fail}" + fi + + if grep -q "release=" "${OUTPUT_FILE}"; then + echo "FAIL: 'release= found in ${OUTPUT_FILE}" >&2 + cat "${OUTPUT_FILE}" >&2 + exit "${ksft_fail}" + fi + + rm "${OUTPUT_FILE}" +} + +# Start socat, send the message and wait for the file to show up in the file +# system +function runtest { + # Listen for netconsole port inside the namespace and destination + # interface + listen_port_and_save_to "${OUTPUT_FILE}" & + # Wait for socat to start and listen to the port. + wait_local_port_listen "${NAMESPACE}" "${PORT}" udp + # Send the message + taskset -c "${CPU}" echo "${MSG}: ${TARGET}" > /dev/kmsg + # Wait until socat saves the file to disk + busywait "${BUSYWAIT_TIMEOUT}" test -s "${OUTPUT_FILE}" +} + +# ========== # +# Start here # +# ========== # + +modprobe netdevsim 2> /dev/null || true +modprobe netconsole 2> /dev/null || true + +# Check for basic system dependency and exit if not found +check_for_dependencies +# This test also depends on taskset(1). Check for it before starting the test +check_for_taskset + +# Set current loglevel to KERN_INFO(6), and default to KERN_NOTICE(5) +echo "6 5" > /proc/sys/kernel/printk +# Remove the namespace, interfaces and netconsole target on exit +trap cleanup EXIT +# Create one namespace and two interfaces +set_network +# Create a dynamic target for netconsole +create_dynamic_target + +#==================================================== +# TEST #1 +# Send message from a random CPU +#==================================================== +# Random CPU in the system +CPU=$((RANDOM % $(nproc))) +OUTPUT_FILE="/tmp/${TARGET}_1" +MSG="Test #1 from CPU${CPU}" +# Enable the auto population of cpu_nr +set_cpu_nr +# Enable taskname to be appended to sysdata +set_taskname +set_release +runtest +# Make sure the message was received in the dst part +# and exit +validate_release +validate_sysdata + +#==================================================== +# TEST #2 +# This test now adds userdata together with sysdata +# =================================================== +# Get a new random CPU +CPU=$((RANDOM % $(nproc))) +OUTPUT_FILE="/tmp/${TARGET}_2" +MSG="Test #2 from CPU${CPU}" +set_user_data +runtest +validate_release +validate_sysdata + +# =================================================== +# TEST #3 +# Unset all sysdata, fail if any userdata is set +# =================================================== +CPU=$((RANDOM % $(nproc))) +OUTPUT_FILE="/tmp/${TARGET}_3" +MSG="Test #3 from CPU${CPU}" +unset_cpu_nr +unset_taskname +unset_release +runtest +# At this time, cpu= shouldn't be present in the msg +validate_no_sysdata + +exit "${ksft_pass}" diff --git a/tools/testing/selftests/drivers/net/netdevsim/Makefile b/tools/testing/selftests/drivers/net/netdevsim/Makefile index 5bace0b7fb57..07b7c46d3311 100644 --- a/tools/testing/selftests/drivers/net/netdevsim/Makefile +++ b/tools/testing/selftests/drivers/net/netdevsim/Makefile @@ -4,11 +4,14 @@ TEST_PROGS = devlink.sh \ devlink_in_netns.sh \ devlink_trap.sh \ ethtool-coalesce.sh \ + ethtool-features.sh \ ethtool-fec.sh \ ethtool-pause.sh \ ethtool-ring.sh \ fib.sh \ + fib_notifications.sh \ hw_stats_l3.sh \ + macsec-offload.sh \ nexthop.sh \ peer.sh \ psample.sh \ diff --git a/tools/testing/selftests/drivers/net/netdevsim/config b/tools/testing/selftests/drivers/net/netdevsim/config index adf45a3a78b4..5117c78ddf0a 100644 --- a/tools/testing/selftests/drivers/net/netdevsim/config +++ b/tools/testing/selftests/drivers/net/netdevsim/config @@ -1,6 +1,7 @@ CONFIG_DUMMY=y CONFIG_GENEVE=m CONFIG_IPV6=y +CONFIG_MACSEC=m CONFIG_NETDEVSIM=m CONFIG_NET_SCH_MQPRIO=y CONFIG_NET_SCH_MULTIQ=y diff --git a/tools/testing/selftests/drivers/net/netdevsim/ethtool-features.sh b/tools/testing/selftests/drivers/net/netdevsim/ethtool-features.sh new file mode 100644 index 000000000000..bc210dc6ad2d --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/ethtool-features.sh @@ -0,0 +1,31 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-only + +source ethtool-common.sh + +NSIM_NETDEV=$(make_netdev) + +set -o pipefail + +FEATS=" + tx-checksum-ip-generic + tx-scatter-gather + tx-tcp-segmentation + generic-segmentation-offload + generic-receive-offload" + +for feat in $FEATS ; do + s=$(ethtool --json -k $NSIM_NETDEV | jq ".[].\"$feat\".active" 2>/dev/null) + check $? "$s" true + + s=$(ethtool --json -k $NSIM_NETDEV | jq ".[].\"$feat\".fixed" 2>/dev/null) + check $? "$s" false +done + +if [ $num_errors -eq 0 ]; then + echo "PASSED all $((num_passes)) checks" + exit 0 +else + echo "FAILED $num_errors/$((num_errors+num_passes)) checks" + exit 1 +fi diff --git a/tools/testing/selftests/drivers/net/netdevsim/fib_notifications.sh b/tools/testing/selftests/drivers/net/netdevsim/fib_notifications.sh index 8d91191a098c..9896580c3d85 100755 --- a/tools/testing/selftests/drivers/net/netdevsim/fib_notifications.sh +++ b/tools/testing/selftests/drivers/net/netdevsim/fib_notifications.sh @@ -94,7 +94,7 @@ route_addition_check() sleep 1 $IP route add $route dev dummy1 sleep 1 - kill %% && wait %% &> /dev/null + kill_process %% route_notify_check $outfile $expected_num_notifications $offload_failed rm -f $outfile @@ -148,7 +148,7 @@ route_deletion_check() sleep 1 $IP route del $route dev dummy1 sleep 1 - kill %% && wait %% &> /dev/null + kill_process %% route_notify_check $outfile $expected_num_notifications rm -f $outfile @@ -191,7 +191,7 @@ route_replacement_check() sleep 1 $IP route replace $route dev dummy2 sleep 1 - kill %% && wait %% &> /dev/null + kill_process %% route_notify_check $outfile $expected_num_notifications rm -f $outfile diff --git a/tools/testing/selftests/drivers/net/netdevsim/macsec-offload.sh b/tools/testing/selftests/drivers/net/netdevsim/macsec-offload.sh new file mode 100755 index 000000000000..98033e6667d2 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/macsec-offload.sh @@ -0,0 +1,117 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-only + +source ethtool-common.sh + +NSIM_NETDEV=$(make_netdev) +MACSEC_NETDEV=macsec_nsim + +set -o pipefail + +if ! ethtool -k $NSIM_NETDEV | grep -q 'macsec-hw-offload: on'; then + echo "SKIP: netdevsim doesn't support MACsec offload" + exit 4 +fi + +if ! ip link add link $NSIM_NETDEV $MACSEC_NETDEV type macsec offload mac 2>/dev/null; then + echo "SKIP: couldn't create macsec device" + exit 4 +fi +ip link del $MACSEC_NETDEV + +# +# test macsec offload API +# + +ip link add link $NSIM_NETDEV "${MACSEC_NETDEV}" type macsec port 4 offload mac +check $? + +ip link add link $NSIM_NETDEV "${MACSEC_NETDEV}2" type macsec address "aa:bb:cc:dd:ee:ff" port 5 offload mac +check $? + +ip link add link $NSIM_NETDEV "${MACSEC_NETDEV}3" type macsec sci abbacdde01020304 offload mac +check $? + +ip link add link $NSIM_NETDEV "${MACSEC_NETDEV}4" type macsec port 8 offload mac 2> /dev/null +check $? '' '' 1 + +ip macsec add "${MACSEC_NETDEV}" tx sa 0 pn 1024 on key 01 12345678901234567890123456789012 +check $? + +ip macsec add "${MACSEC_NETDEV}" rx port 1234 address "1c:ed:de:ad:be:ef" +check $? + +ip macsec add "${MACSEC_NETDEV}" rx port 1234 address "1c:ed:de:ad:be:ef" sa 0 pn 1 on \ + key 00 0123456789abcdef0123456789abcdef +check $? + +ip macsec add "${MACSEC_NETDEV}" rx port 1235 address "1c:ed:de:ad:be:ef" 2> /dev/null +check $? '' '' 1 + +# can't disable macsec offload when SAs are configured +ip link set "${MACSEC_NETDEV}" type macsec offload off 2> /dev/null +check $? '' '' 1 + +ip macsec offload "${MACSEC_NETDEV}" off 2> /dev/null +check $? '' '' 1 + +# toggle macsec offload via rtnetlink +ip link set "${MACSEC_NETDEV}2" type macsec offload off +check $? + +ip link set "${MACSEC_NETDEV}2" type macsec offload mac +check $? + +# toggle macsec offload via genetlink +ip macsec offload "${MACSEC_NETDEV}2" off +check $? + +ip macsec offload "${MACSEC_NETDEV}2" mac +check $? + +for dev in ${MACSEC_NETDEV}{,2,3} ; do + ip link del $dev + check $? +done + + +# +# test ethtool features when toggling offload +# + +ip link add link $NSIM_NETDEV $MACSEC_NETDEV type macsec offload mac +TMP_FEATS_ON_1="$(ethtool -k $MACSEC_NETDEV)" + +ip link set $MACSEC_NETDEV type macsec offload off +TMP_FEATS_OFF_1="$(ethtool -k $MACSEC_NETDEV)" + +ip link set $MACSEC_NETDEV type macsec offload mac +TMP_FEATS_ON_2="$(ethtool -k $MACSEC_NETDEV)" + +[ "$TMP_FEATS_ON_1" = "$TMP_FEATS_ON_2" ] +check $? + +ip link del $MACSEC_NETDEV + +ip link add link $NSIM_NETDEV $MACSEC_NETDEV type macsec +check $? + +TMP_FEATS_OFF_2="$(ethtool -k $MACSEC_NETDEV)" +[ "$TMP_FEATS_OFF_1" = "$TMP_FEATS_OFF_2" ] +check $? + +ip link set $MACSEC_NETDEV type macsec offload mac +check $? + +TMP_FEATS_ON_3="$(ethtool -k $MACSEC_NETDEV)" +[ "$TMP_FEATS_ON_1" = "$TMP_FEATS_ON_3" ] +check $? + + +if [ $num_errors -eq 0 ]; then + echo "PASSED all $((num_passes)) checks" + exit 0 +else + echo "FAILED $num_errors/$((num_errors+num_passes)) checks" + exit 1 +fi diff --git a/tools/testing/selftests/drivers/net/netdevsim/peer.sh b/tools/testing/selftests/drivers/net/netdevsim/peer.sh index aed62d9e6c0a..1bb46ec435d4 100755 --- a/tools/testing/selftests/drivers/net/netdevsim/peer.sh +++ b/tools/testing/selftests/drivers/net/netdevsim/peer.sh @@ -1,7 +1,7 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0-only -source ../../../net/net_helper.sh +source ../../../net/lib.sh NSIM_DEV_1_ID=$((256 + RANDOM % 256)) NSIM_DEV_1_SYS=/sys/bus/netdevsim/devices/netdevsim$NSIM_DEV_1_ID diff --git a/tools/testing/selftests/drivers/net/netdevsim/tc-mq-visibility.sh b/tools/testing/selftests/drivers/net/netdevsim/tc-mq-visibility.sh index fd13c8cfb7a8..b411fe66510f 100755 --- a/tools/testing/selftests/drivers/net/netdevsim/tc-mq-visibility.sh +++ b/tools/testing/selftests/drivers/net/netdevsim/tc-mq-visibility.sh @@ -58,9 +58,12 @@ for root in mq mqprio; do ethtool -L $NDEV combined 4 n_child_assert 4 "One real queue, rest default" - # Graft some - tcq replace parent 100:1 handle 204: - n_child_assert 3 "Grafted" + # Remove real one + tcq del parent 100:4 handle 204: + + # Replace default with pfifo + tcq replace parent 100:1 handle 205: pfifo limit 1000 + n_child_assert 3 "Deleting real one, replacing default one with pfifo" ethtool -L $NDEV combined 1 n_child_assert 1 "Grafted, one" diff --git a/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh b/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh index 384cfa3d38a6..92c2f0376c08 100755 --- a/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh +++ b/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh @@ -142,7 +142,7 @@ function pre_ethtool { } function check_table { - local path=$NSIM_DEV_DFS/ports/$port/udp_ports_table$1 + local path=$NSIM_DEV_DFS/ports/$port/udp_ports/table$1 local -n expected=$2 local last=$3 @@ -212,7 +212,7 @@ function check_tables { } function print_table { - local path=$NSIM_DEV_DFS/ports/$port/udp_ports_table$1 + local path=$NSIM_DEV_DFS/ports/$port/udp_ports/table$1 read -a have < $path tree $NSIM_DEV_DFS/ @@ -641,7 +641,7 @@ for port in 0 1; do NSIM_NETDEV=`get_netdev_name old_netdevs` ip link set dev $NSIM_NETDEV up - echo 110 > $NSIM_DEV_DFS/ports/$port/udp_ports_inject_error + echo 110 > $NSIM_DEV_DFS/ports/$port/udp_ports/inject_error msg="1 - create VxLANs v6" exp0=( 0 0 0 0 ) @@ -663,7 +663,7 @@ for port in 0 1; do new_geneve gnv0 20000 msg="2 - destroy GENEVE" - echo 2 > $NSIM_DEV_DFS/ports/$port/udp_ports_inject_error + echo 2 > $NSIM_DEV_DFS/ports/$port/udp_ports/inject_error exp1=( `mke 20000 2` 0 0 0 ) del_dev gnv0 @@ -764,7 +764,7 @@ for port in 0 1; do msg="create VxLANs v4" new_vxlan vxlan0 10000 $NSIM_NETDEV - echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset + echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports/reset check_tables msg="NIC device goes down" @@ -775,7 +775,7 @@ for port in 0 1; do fi check_tables - echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset + echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports/reset check_tables msg="NIC device goes up again" @@ -789,7 +789,7 @@ for port in 0 1; do del_dev vxlan0 check_tables - echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset + echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports/reset check_tables msg="destroy NIC" @@ -896,7 +896,7 @@ msg="vacate VxLAN in overflow table" exp0=( `mke 10000 1` `mke 10004 1` 0 `mke 10003 1` ) del_dev vxlan2 -echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset +echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports/reset check_tables msg="tunnels destroyed 2" diff --git a/tools/testing/selftests/drivers/net/ocelot/psfp.sh b/tools/testing/selftests/drivers/net/ocelot/psfp.sh index bed748dde4b0..8972f42dfe03 100755 --- a/tools/testing/selftests/drivers/net/ocelot/psfp.sh +++ b/tools/testing/selftests/drivers/net/ocelot/psfp.sh @@ -266,18 +266,14 @@ run_test() "${base_time}" \ "${CYCLE_TIME_NS}" \ "${SHIFT_TIME_NS}" \ + "${GATE_DURATION_NS}" \ "${NUM_PKTS}" \ "${STREAM_VID}" \ "${STREAM_PRIO}" \ "" \ "${isochron_dat}" - # Count all received packets by looking at the non-zero RX timestamps - received=$(isochron report \ - --input-file "${isochron_dat}" \ - --printf-format "%u\n" --printf-args "R" | \ - grep -w -v '0' | wc -l) - + received=$(isochron_report_num_received "${isochron_dat}") if [ "${received}" = "${expected}" ]; then RET=0 else diff --git a/tools/testing/selftests/drivers/net/ping.py b/tools/testing/selftests/drivers/net/ping.py new file mode 100755 index 000000000000..e0f114612c1a --- /dev/null +++ b/tools/testing/selftests/drivers/net/ping.py @@ -0,0 +1,241 @@ +#!/usr/bin/env python3 +# SPDX-License-Identifier: GPL-2.0 + +import os +import random, string, time +from lib.py import ksft_run, ksft_exit +from lib.py import ksft_eq, KsftSkipEx, KsftFailEx +from lib.py import EthtoolFamily, NetDrvEpEnv +from lib.py import bkg, cmd, wait_port_listen, rand_port +from lib.py import defer, ethtool, ip + +no_sleep=False + +def _test_v4(cfg) -> None: + if not cfg.addr_v["4"]: + return + + cmd("ping -c 1 -W0.5 " + cfg.remote_addr_v["4"]) + cmd("ping -c 1 -W0.5 " + cfg.addr_v["4"], host=cfg.remote) + cmd("ping -s 65000 -c 1 -W0.5 " + cfg.remote_addr_v["4"]) + cmd("ping -s 65000 -c 1 -W0.5 " + cfg.addr_v["4"], host=cfg.remote) + +def _test_v6(cfg) -> None: + if not cfg.addr_v["6"]: + return + + cmd("ping -c 1 -W5 " + cfg.remote_addr_v["6"]) + cmd("ping -c 1 -W5 " + cfg.addr_v["6"], host=cfg.remote) + cmd("ping -s 65000 -c 1 -W0.5 " + cfg.remote_addr_v["6"]) + cmd("ping -s 65000 -c 1 -W0.5 " + cfg.addr_v["6"], host=cfg.remote) + +def _test_tcp(cfg) -> None: + cfg.require_cmd("socat", remote=True) + + port = rand_port() + listen_cmd = f"socat -{cfg.addr_ipver} -t 2 -u TCP-LISTEN:{port},reuseport STDOUT" + + test_string = ''.join(random.choice(string.ascii_lowercase) for _ in range(65536)) + with bkg(listen_cmd, exit_wait=True) as nc: + wait_port_listen(port) + + cmd(f"echo {test_string} | socat -t 2 -u STDIN TCP:{cfg.baddr}:{port}", + shell=True, host=cfg.remote) + ksft_eq(nc.stdout.strip(), test_string) + + test_string = ''.join(random.choice(string.ascii_lowercase) for _ in range(65536)) + with bkg(listen_cmd, host=cfg.remote, exit_wait=True) as nc: + wait_port_listen(port, host=cfg.remote) + + cmd(f"echo {test_string} | socat -t 2 -u STDIN TCP:{cfg.remote_baddr}:{port}", shell=True) + ksft_eq(nc.stdout.strip(), test_string) + +def _schedule_checksum_reset(cfg, netnl) -> None: + features = ethtool(f"-k {cfg.ifname}", json=True) + setting = "" + for side in ["tx", "rx"]: + f = features[0][side + "-checksumming"] + if not f["fixed"]: + setting += " " + side + setting += " " + ("on" if f["requested"] or f["active"] else "off") + defer(ethtool, f" -K {cfg.ifname} " + setting) + +def _set_offload_checksum(cfg, netnl, on) -> None: + try: + ethtool(f" -K {cfg.ifname} rx {on} tx {on} ") + except: + return + +def _set_xdp_generic_sb_on(cfg) -> None: + prog = cfg.net_lib_dir / "xdp_dummy.bpf.o" + cmd(f"ip link set dev {cfg.remote_ifname} mtu 1500", shell=True, host=cfg.remote) + cmd(f"ip link set dev {cfg.ifname} mtu 1500 xdpgeneric obj {prog} sec xdp", shell=True) + defer(cmd, f"ip link set dev {cfg.ifname} xdpgeneric off") + + if no_sleep != True: + time.sleep(10) + +def _set_xdp_generic_mb_on(cfg) -> None: + prog = cfg.net_lib_dir / "xdp_dummy.bpf.o" + cmd(f"ip link set dev {cfg.remote_ifname} mtu 9000", shell=True, host=cfg.remote) + defer(ip, f"link set dev {cfg.remote_ifname} mtu 1500", host=cfg.remote) + ip("link set dev %s mtu 9000 xdpgeneric obj %s sec xdp.frags" % (cfg.ifname, prog)) + defer(ip, f"link set dev {cfg.ifname} mtu 1500 xdpgeneric off") + + if no_sleep != True: + time.sleep(10) + +def _set_xdp_native_sb_on(cfg) -> None: + prog = cfg.net_lib_dir / "xdp_dummy.bpf.o" + cmd(f"ip link set dev {cfg.remote_ifname} mtu 1500", shell=True, host=cfg.remote) + cmd(f"ip -j link set dev {cfg.ifname} mtu 1500 xdp obj {prog} sec xdp", shell=True) + defer(ip, f"link set dev {cfg.ifname} mtu 1500 xdp off") + xdp_info = ip("-d link show %s" % (cfg.ifname), json=True)[0] + if xdp_info['xdp']['mode'] != 1: + """ + If the interface doesn't support native-mode, it falls back to generic mode. + The mode value 1 is native and 2 is generic. + So it raises an exception if mode is not 1(native mode). + """ + raise KsftSkipEx('device does not support native-XDP') + + if no_sleep != True: + time.sleep(10) + +def _set_xdp_native_mb_on(cfg) -> None: + prog = cfg.net_lib_dir / "xdp_dummy.bpf.o" + cmd(f"ip link set dev {cfg.remote_ifname} mtu 9000", shell=True, host=cfg.remote) + defer(ip, f"link set dev {cfg.remote_ifname} mtu 1500", host=cfg.remote) + try: + cmd(f"ip link set dev {cfg.ifname} mtu 9000 xdp obj {prog} sec xdp.frags", shell=True) + defer(ip, f"link set dev {cfg.ifname} mtu 1500 xdp off") + except Exception as e: + raise KsftSkipEx('device does not support native-multi-buffer XDP') + + if no_sleep != True: + time.sleep(10) + +def _set_xdp_offload_on(cfg) -> None: + prog = cfg.net_lib_dir / "xdp_dummy.bpf.o" + cmd(f"ip link set dev {cfg.ifname} mtu 1500", shell=True) + try: + cmd(f"ip link set dev {cfg.ifname} xdpoffload obj {prog} sec xdp", shell=True) + except Exception as e: + raise KsftSkipEx('device does not support offloaded XDP') + defer(ip, f"link set dev {cfg.ifname} xdpoffload off") + cmd(f"ip link set dev {cfg.remote_ifname} mtu 1500", shell=True, host=cfg.remote) + + if no_sleep != True: + time.sleep(10) + +def get_interface_info(cfg) -> None: + global no_sleep + + if cfg.remote_ifname == "": + raise KsftFailEx('Can not get remote interface') + local_info = ip("-d link show %s" % (cfg.ifname), json=True)[0] + if 'parentbus' in local_info and local_info['parentbus'] == "netdevsim": + no_sleep=True + if 'linkinfo' in local_info and local_info['linkinfo']['info_kind'] == "veth": + no_sleep=True + +def set_interface_init(cfg) -> None: + cmd(f"ip link set dev {cfg.ifname} mtu 1500", shell=True) + cmd(f"ip link set dev {cfg.ifname} xdp off ", shell=True) + cmd(f"ip link set dev {cfg.ifname} xdpgeneric off ", shell=True) + cmd(f"ip link set dev {cfg.ifname} xdpoffload off", shell=True) + cmd(f"ip link set dev {cfg.remote_ifname} mtu 1500", shell=True, host=cfg.remote) + +def test_default_v4(cfg, netnl) -> None: + cfg.require_ipver("4") + + _schedule_checksum_reset(cfg, netnl) + _set_offload_checksum(cfg, netnl, "off") + _test_v4(cfg) + _test_tcp(cfg) + _set_offload_checksum(cfg, netnl, "on") + _test_v4(cfg) + _test_tcp(cfg) + +def test_default_v6(cfg, netnl) -> None: + cfg.require_ipver("6") + + _schedule_checksum_reset(cfg, netnl) + _set_offload_checksum(cfg, netnl, "off") + _test_v6(cfg) + _test_tcp(cfg) + _set_offload_checksum(cfg, netnl, "on") + _test_v6(cfg) + _test_tcp(cfg) + +def test_xdp_generic_sb(cfg, netnl) -> None: + _schedule_checksum_reset(cfg, netnl) + _set_xdp_generic_sb_on(cfg) + _set_offload_checksum(cfg, netnl, "off") + _test_v4(cfg) + _test_v6(cfg) + _test_tcp(cfg) + _set_offload_checksum(cfg, netnl, "on") + _test_v4(cfg) + _test_v6(cfg) + _test_tcp(cfg) + +def test_xdp_generic_mb(cfg, netnl) -> None: + _schedule_checksum_reset(cfg, netnl) + _set_xdp_generic_mb_on(cfg) + _set_offload_checksum(cfg, netnl, "off") + _test_v4(cfg) + _test_v6(cfg) + _test_tcp(cfg) + _set_offload_checksum(cfg, netnl, "on") + _test_v4(cfg) + _test_v6(cfg) + _test_tcp(cfg) + +def test_xdp_native_sb(cfg, netnl) -> None: + _schedule_checksum_reset(cfg, netnl) + _set_xdp_native_sb_on(cfg) + _set_offload_checksum(cfg, netnl, "off") + _test_v4(cfg) + _test_v6(cfg) + _test_tcp(cfg) + _set_offload_checksum(cfg, netnl, "on") + _test_v4(cfg) + _test_v6(cfg) + _test_tcp(cfg) + +def test_xdp_native_mb(cfg, netnl) -> None: + _schedule_checksum_reset(cfg, netnl) + _set_xdp_native_mb_on(cfg) + _set_offload_checksum(cfg, netnl, "off") + _test_v4(cfg) + _test_v6(cfg) + _test_tcp(cfg) + _set_offload_checksum(cfg, netnl, "on") + _test_v4(cfg) + _test_v6(cfg) + _test_tcp(cfg) + +def test_xdp_offload(cfg, netnl) -> None: + _set_xdp_offload_on(cfg) + _test_v4(cfg) + _test_v6(cfg) + _test_tcp(cfg) + +def main() -> None: + with NetDrvEpEnv(__file__) as cfg: + get_interface_info(cfg) + set_interface_init(cfg) + ksft_run([test_default_v4, + test_default_v6, + test_xdp_generic_sb, + test_xdp_generic_mb, + test_xdp_native_sb, + test_xdp_native_mb, + test_xdp_offload], + args=(cfg, EthtoolFamily())) + ksft_exit() + + +if __name__ == "__main__": + main() diff --git a/tools/testing/selftests/drivers/net/queues.py b/tools/testing/selftests/drivers/net/queues.py new file mode 100755 index 000000000000..236005290a33 --- /dev/null +++ b/tools/testing/selftests/drivers/net/queues.py @@ -0,0 +1,125 @@ +#!/usr/bin/env python3 +# SPDX-License-Identifier: GPL-2.0 + +from lib.py import ksft_disruptive, ksft_exit, ksft_run +from lib.py import ksft_eq, ksft_not_in, ksft_raises, KsftSkipEx, KsftFailEx +from lib.py import EthtoolFamily, NetdevFamily, NlError +from lib.py import NetDrvEnv +from lib.py import bkg, cmd, defer, ip +import errno +import glob +import os +import socket +import struct + +def sys_get_queues(ifname, qtype='rx') -> int: + folders = glob.glob(f'/sys/class/net/{ifname}/queues/{qtype}-*') + return len(folders) + + +def nl_get_queues(cfg, nl, qtype='rx'): + queues = nl.queue_get({'ifindex': cfg.ifindex}, dump=True) + if queues: + return len([q for q in queues if q['type'] == qtype]) + return None + + +def check_xsk(cfg, nl, xdp_queue_id=0) -> None: + # Probe for support + xdp = cmd(f'{cfg.net_lib_dir / "xdp_helper"} - -', fail=False) + if xdp.ret == 255: + raise KsftSkipEx('AF_XDP unsupported') + elif xdp.ret > 0: + raise KsftFailEx('unable to create AF_XDP socket') + + with bkg(f'{cfg.net_lib_dir / "xdp_helper"} {cfg.ifindex} {xdp_queue_id}', + ksft_wait=3): + + rx = tx = False + + queues = nl.queue_get({'ifindex': cfg.ifindex}, dump=True) + if not queues: + raise KsftSkipEx("Netlink reports no queues") + + for q in queues: + if q['id'] == 0: + if q['type'] == 'rx': + rx = True + if q['type'] == 'tx': + tx = True + + ksft_eq(q.get('xsk', None), {}, + comment="xsk attr on queue we configured") + else: + ksft_not_in('xsk', q, + comment="xsk attr on queue we didn't configure") + + ksft_eq(rx, True) + ksft_eq(tx, True) + + +def get_queues(cfg, nl) -> None: + snl = NetdevFamily(recv_size=4096) + + for qtype in ['rx', 'tx']: + queues = nl_get_queues(cfg, snl, qtype) + if not queues: + raise KsftSkipEx('queue-get not supported by device') + + expected = sys_get_queues(cfg.dev['ifname'], qtype) + ksft_eq(queues, expected) + + +def addremove_queues(cfg, nl) -> None: + queues = nl_get_queues(cfg, nl) + if not queues: + raise KsftSkipEx('queue-get not supported by device') + + curr_queues = sys_get_queues(cfg.dev['ifname']) + if curr_queues == 1: + raise KsftSkipEx('cannot decrement queue: already at 1') + + netnl = EthtoolFamily() + channels = netnl.channels_get({'header': {'dev-index': cfg.ifindex}}) + rx_type = 'rx' + if channels.get('combined-count', 0) > 0: + rx_type = 'combined' + + expected = curr_queues - 1 + cmd(f"ethtool -L {cfg.dev['ifname']} {rx_type} {expected}", timeout=10) + queues = nl_get_queues(cfg, nl) + ksft_eq(queues, expected) + + expected = curr_queues + cmd(f"ethtool -L {cfg.dev['ifname']} {rx_type} {expected}", timeout=10) + queues = nl_get_queues(cfg, nl) + ksft_eq(queues, expected) + + +@ksft_disruptive +def check_down(cfg, nl) -> None: + # Check the NAPI IDs before interface goes down and hides them + napis = nl.napi_get({'ifindex': cfg.ifindex}, dump=True) + + ip(f"link set dev {cfg.dev['ifname']} down") + defer(ip, f"link set dev {cfg.dev['ifname']} up") + + with ksft_raises(NlError) as cm: + nl.queue_get({'ifindex': cfg.ifindex, 'id': 0, 'type': 'rx'}) + ksft_eq(cm.exception.nl_msg.error, -errno.ENOENT) + + if napis: + with ksft_raises(NlError) as cm: + nl.napi_get({'id': napis[0]['id']}) + ksft_eq(cm.exception.nl_msg.error, -errno.ENOENT) + + +def main() -> None: + with NetDrvEnv(__file__, queue_count=100) as cfg: + ksft_run([get_queues, addremove_queues, check_down, check_xsk], + args=(cfg, NetdevFamily())) + ksft_exit() + + +if __name__ == "__main__": + main() diff --git a/tools/testing/selftests/drivers/net/shaper.py b/tools/testing/selftests/drivers/net/shaper.py new file mode 100755 index 000000000000..11310f19bfa0 --- /dev/null +++ b/tools/testing/selftests/drivers/net/shaper.py @@ -0,0 +1,461 @@ +#!/usr/bin/env python3 +# SPDX-License-Identifier: GPL-2.0 + +from lib.py import ksft_run, ksft_exit, ksft_eq, ksft_true, KsftSkipEx +from lib.py import EthtoolFamily, NetshaperFamily +from lib.py import NetDrvEnv +from lib.py import NlError +from lib.py import cmd + +def get_shapers(cfg, nl_shaper) -> None: + try: + shapers = nl_shaper.get({'ifindex': cfg.ifindex}, dump=True) + except NlError as e: + if e.error == 95: + raise KsftSkipEx("shapers not supported by the device") + raise + + # Default configuration: no shapers configured. + ksft_eq(len(shapers), 0) + +def get_caps(cfg, nl_shaper) -> None: + try: + caps = nl_shaper.cap_get({'ifindex': cfg.ifindex}, dump=True) + except NlError as e: + if e.error == 95: + raise KsftSkipEx("shapers not supported by the device") + raise + + # Each device implementing shaper support must support some + # features in at least a scope. + ksft_true(len(caps)> 0) + +def set_qshapers(cfg, nl_shaper) -> None: + try: + caps = nl_shaper.cap_get({'ifindex': cfg.ifindex, + 'scope':'queue'}) + except NlError as e: + if e.error == 95: + raise KsftSkipEx("shapers not supported by the device") + raise + if not 'support-bw-max' in caps or not 'support-metric-bps' in caps: + raise KsftSkipEx("device does not support queue scope shapers with bw_max and metric bps") + + cfg.queues = True; + netnl = EthtoolFamily() + channels = netnl.channels_get({'header': {'dev-index': cfg.ifindex}}) + if channels['combined-count'] == 0: + cfg.rx_type = 'rx' + cfg.nr_queues = channels['rx-count'] + else: + cfg.rx_type = 'combined' + cfg.nr_queues = channels['combined-count'] + if cfg.nr_queues < 3: + raise KsftSkipEx(f"device does not support enough queues min 3 found {cfg.nr_queues}") + + nl_shaper.set({'ifindex': cfg.ifindex, + 'handle': {'scope': 'queue', 'id': 1}, + 'metric': 'bps', + 'bw-max': 10000}) + nl_shaper.set({'ifindex': cfg.ifindex, + 'handle': {'scope': 'queue', 'id': 2}, + 'metric': 'bps', + 'bw-max': 20000}) + + # Querying a specific shaper not yet configured must fail. + raised = False + try: + shaper_q0 = nl_shaper.get({'ifindex': cfg.ifindex, + 'handle': {'scope': 'queue', 'id': 0}}) + except (NlError): + raised = True + ksft_eq(raised, True) + + shaper_q1 = nl_shaper.get({'ifindex': cfg.ifindex, + 'handle': {'scope': 'queue', 'id': 1}}) + ksft_eq(shaper_q1, {'ifindex': cfg.ifindex, + 'parent': {'scope': 'netdev'}, + 'handle': {'scope': 'queue', 'id': 1}, + 'metric': 'bps', + 'bw-max': 10000}) + + shapers = nl_shaper.get({'ifindex': cfg.ifindex}, dump=True) + ksft_eq(shapers, [{'ifindex': cfg.ifindex, + 'parent': {'scope': 'netdev'}, + 'handle': {'scope': 'queue', 'id': 1}, + 'metric': 'bps', + 'bw-max': 10000}, + {'ifindex': cfg.ifindex, + 'parent': {'scope': 'netdev'}, + 'handle': {'scope': 'queue', 'id': 2}, + 'metric': 'bps', + 'bw-max': 20000}]) + +def del_qshapers(cfg, nl_shaper) -> None: + if not cfg.queues: + raise KsftSkipEx("queue shapers not supported by device, skipping delete") + + nl_shaper.delete({'ifindex': cfg.ifindex, + 'handle': {'scope': 'queue', 'id': 2}}) + nl_shaper.delete({'ifindex': cfg.ifindex, + 'handle': {'scope': 'queue', 'id': 1}}) + shapers = nl_shaper.get({'ifindex': cfg.ifindex}, dump=True) + ksft_eq(len(shapers), 0) + +def set_nshapers(cfg, nl_shaper) -> None: + # Check required features. + try: + caps = nl_shaper.cap_get({'ifindex': cfg.ifindex, + 'scope':'netdev'}) + except NlError as e: + if e.error == 95: + raise KsftSkipEx("shapers not supported by the device") + raise + if not 'support-bw-max' in caps or not 'support-metric-bps' in caps: + raise KsftSkipEx("device does not support nested netdev scope shapers with weight") + + cfg.netdev = True; + nl_shaper.set({'ifindex': cfg.ifindex, + 'handle': {'scope': 'netdev', 'id': 0}, + 'bw-max': 100000}) + + shapers = nl_shaper.get({'ifindex': cfg.ifindex}, dump=True) + ksft_eq(shapers, [{'ifindex': cfg.ifindex, + 'handle': {'scope': 'netdev'}, + 'metric': 'bps', + 'bw-max': 100000}]) + +def del_nshapers(cfg, nl_shaper) -> None: + if not cfg.netdev: + raise KsftSkipEx("netdev shaper not supported by device, skipping delete") + + nl_shaper.delete({'ifindex': cfg.ifindex, + 'handle': {'scope': 'netdev'}}) + shapers = nl_shaper.get({'ifindex': cfg.ifindex}, dump=True) + ksft_eq(len(shapers), 0) + +def basic_groups(cfg, nl_shaper) -> None: + if not cfg.netdev: + raise KsftSkipEx("netdev shaper not supported by the device") + if cfg.nr_queues < 3: + raise KsftSkipEx(f"netdev does not have enough queues min 3 reported {cfg.nr_queues}") + + try: + caps = nl_shaper.cap_get({'ifindex': cfg.ifindex, + 'scope':'queue'}) + except NlError as e: + if e.error == 95: + raise KsftSkipEx("shapers not supported by the device") + raise + if not 'support-weight' in caps: + raise KsftSkipEx("device does not support queue scope shapers with weight") + + node_handle = nl_shaper.group({ + 'ifindex': cfg.ifindex, + 'leaves':[{'handle': {'scope': 'queue', 'id': 1}, + 'weight': 1}, + {'handle': {'scope': 'queue', 'id': 2}, + 'weight': 2}], + 'handle': {'scope':'netdev'}, + 'metric': 'bps', + 'bw-max': 10000}) + ksft_eq(node_handle, {'ifindex': cfg.ifindex, + 'handle': {'scope': 'netdev'}}) + + shaper = nl_shaper.get({'ifindex': cfg.ifindex, + 'handle': {'scope': 'queue', 'id': 1}}) + ksft_eq(shaper, {'ifindex': cfg.ifindex, + 'parent': {'scope': 'netdev'}, + 'handle': {'scope': 'queue', 'id': 1}, + 'weight': 1 }) + + nl_shaper.delete({'ifindex': cfg.ifindex, + 'handle': {'scope': 'queue', 'id': 2}}) + nl_shaper.delete({'ifindex': cfg.ifindex, + 'handle': {'scope': 'queue', 'id': 1}}) + + # Deleting all the leaves shaper does not affect the node one + # when the latter has 'netdev' scope. + shapers = nl_shaper.get({'ifindex': cfg.ifindex}, dump=True) + ksft_eq(len(shapers), 1) + + nl_shaper.delete({'ifindex': cfg.ifindex, + 'handle': {'scope': 'netdev'}}) + +def qgroups(cfg, nl_shaper) -> None: + if cfg.nr_queues < 4: + raise KsftSkipEx(f"netdev does not have enough queues min 4 reported {cfg.nr_queues}") + try: + caps = nl_shaper.cap_get({'ifindex': cfg.ifindex, + 'scope':'node'}) + except NlError as e: + if e.error == 95: + raise KsftSkipEx("shapers not supported by the device") + raise + if not 'support-bw-max' in caps or not 'support-metric-bps' in caps: + raise KsftSkipEx("device does not support node scope shapers with bw_max and metric bps") + try: + caps = nl_shaper.cap_get({'ifindex': cfg.ifindex, + 'scope':'queue'}) + except NlError as e: + if e.error == 95: + raise KsftSkipEx("shapers not supported by the device") + raise + if not 'support-nesting' in caps or not 'support-weight' in caps or not 'support-metric-bps' in caps: + raise KsftSkipEx("device does not support nested queue scope shapers with weight") + + cfg.groups = True; + node_handle = nl_shaper.group({ + 'ifindex': cfg.ifindex, + 'leaves':[{'handle': {'scope': 'queue', 'id': 1}, + 'weight': 3}, + {'handle': {'scope': 'queue', 'id': 2}, + 'weight': 2}], + 'handle': {'scope':'node'}, + 'metric': 'bps', + 'bw-max': 10000}) + node_id = node_handle['handle']['id'] + + shaper = nl_shaper.get({'ifindex': cfg.ifindex, + 'handle': {'scope': 'queue', 'id': 1}}) + ksft_eq(shaper, {'ifindex': cfg.ifindex, + 'parent': {'scope': 'node', 'id': node_id}, + 'handle': {'scope': 'queue', 'id': 1}, + 'weight': 3}) + shaper = nl_shaper.get({'ifindex': cfg.ifindex, + 'handle': {'scope': 'node', 'id': node_id}}) + ksft_eq(shaper, {'ifindex': cfg.ifindex, + 'handle': {'scope': 'node', 'id': node_id}, + 'parent': {'scope': 'netdev'}, + 'metric': 'bps', + 'bw-max': 10000}) + + # Grouping to a specified, not existing node scope shaper must fail + raised = False + try: + nl_shaper.group({ + 'ifindex': cfg.ifindex, + 'leaves':[{'handle': {'scope': 'queue', 'id': 3}, + 'weight': 3}], + 'handle': {'scope':'node', 'id': node_id + 1}, + 'metric': 'bps', + 'bw-max': 10000}) + + except (NlError): + raised = True + ksft_eq(raised, True) + + # Add to an existing node + node_handle = nl_shaper.group({ + 'ifindex': cfg.ifindex, + 'leaves':[{'handle': {'scope': 'queue', 'id': 3}, + 'weight': 4}], + 'handle': {'scope':'node', 'id': node_id}}) + ksft_eq(node_handle, {'ifindex': cfg.ifindex, + 'handle': {'scope': 'node', 'id': node_id}}) + + shaper = nl_shaper.get({'ifindex': cfg.ifindex, + 'handle': {'scope': 'queue', 'id': 3}}) + ksft_eq(shaper, {'ifindex': cfg.ifindex, + 'parent': {'scope': 'node', 'id': node_id}, + 'handle': {'scope': 'queue', 'id': 3}, + 'weight': 4}) + + nl_shaper.delete({'ifindex': cfg.ifindex, + 'handle': {'scope': 'queue', 'id': 2}}) + nl_shaper.delete({'ifindex': cfg.ifindex, + 'handle': {'scope': 'queue', 'id': 1}}) + + # Deleting a non empty node will move the leaves downstream. + nl_shaper.delete({'ifindex': cfg.ifindex, + 'handle': {'scope': 'node', 'id': node_id}}) + shapers = nl_shaper.get({'ifindex': cfg.ifindex}, dump=True) + ksft_eq(shapers, [{'ifindex': cfg.ifindex, + 'parent': {'scope': 'netdev'}, + 'handle': {'scope': 'queue', 'id': 3}, + 'weight': 4}]) + + # Finish and verify the complete cleanup. + nl_shaper.delete({'ifindex': cfg.ifindex, + 'handle': {'scope': 'queue', 'id': 3}}) + shapers = nl_shaper.get({'ifindex': cfg.ifindex}, dump=True) + ksft_eq(len(shapers), 0) + +def delegation(cfg, nl_shaper) -> None: + if not cfg.groups: + raise KsftSkipEx("device does not support node scope") + try: + caps = nl_shaper.cap_get({'ifindex': cfg.ifindex, + 'scope':'node'}) + except NlError as e: + if e.error == 95: + raise KsftSkipEx("node scope shapers not supported by the device") + raise + if not 'support-nesting' in caps: + raise KsftSkipEx("device does not support node scope shapers nesting") + + node_handle = nl_shaper.group({ + 'ifindex': cfg.ifindex, + 'leaves':[{'handle': {'scope': 'queue', 'id': 1}, + 'weight': 3}, + {'handle': {'scope': 'queue', 'id': 2}, + 'weight': 2}, + {'handle': {'scope': 'queue', 'id': 3}, + 'weight': 1}], + 'handle': {'scope':'node'}, + 'metric': 'bps', + 'bw-max': 10000}) + node_id = node_handle['handle']['id'] + + # Create the nested node and validate the hierarchy + nested_node_handle = nl_shaper.group({ + 'ifindex': cfg.ifindex, + 'leaves':[{'handle': {'scope': 'queue', 'id': 1}, + 'weight': 3}, + {'handle': {'scope': 'queue', 'id': 2}, + 'weight': 2}], + 'handle': {'scope':'node'}, + 'metric': 'bps', + 'bw-max': 5000}) + nested_node_id = nested_node_handle['handle']['id'] + ksft_true(nested_node_id != node_id) + shapers = nl_shaper.get({'ifindex': cfg.ifindex}, dump=True) + ksft_eq(shapers, [{'ifindex': cfg.ifindex, + 'parent': {'scope': 'node', 'id': nested_node_id}, + 'handle': {'scope': 'queue', 'id': 1}, + 'weight': 3}, + {'ifindex': cfg.ifindex, + 'parent': {'scope': 'node', 'id': nested_node_id}, + 'handle': {'scope': 'queue', 'id': 2}, + 'weight': 2}, + {'ifindex': cfg.ifindex, + 'parent': {'scope': 'node', 'id': node_id}, + 'handle': {'scope': 'queue', 'id': 3}, + 'weight': 1}, + {'ifindex': cfg.ifindex, + 'parent': {'scope': 'netdev'}, + 'handle': {'scope': 'node', 'id': node_id}, + 'metric': 'bps', + 'bw-max': 10000}, + {'ifindex': cfg.ifindex, + 'parent': {'scope': 'node', 'id': node_id}, + 'handle': {'scope': 'node', 'id': nested_node_id}, + 'metric': 'bps', + 'bw-max': 5000}]) + + # Deleting a non empty node will move the leaves downstream. + nl_shaper.delete({'ifindex': cfg.ifindex, + 'handle': {'scope': 'node', 'id': nested_node_id}}) + shapers = nl_shaper.get({'ifindex': cfg.ifindex}, dump=True) + ksft_eq(shapers, [{'ifindex': cfg.ifindex, + 'parent': {'scope': 'node', 'id': node_id}, + 'handle': {'scope': 'queue', 'id': 1}, + 'weight': 3}, + {'ifindex': cfg.ifindex, + 'parent': {'scope': 'node', 'id': node_id}, + 'handle': {'scope': 'queue', 'id': 2}, + 'weight': 2}, + {'ifindex': cfg.ifindex, + 'parent': {'scope': 'node', 'id': node_id}, + 'handle': {'scope': 'queue', 'id': 3}, + 'weight': 1}, + {'ifindex': cfg.ifindex, + 'parent': {'scope': 'netdev'}, + 'handle': {'scope': 'node', 'id': node_id}, + 'metric': 'bps', + 'bw-max': 10000}]) + + # Final cleanup. + for i in range(1, 4): + nl_shaper.delete({'ifindex': cfg.ifindex, + 'handle': {'scope': 'queue', 'id': i}}) + shapers = nl_shaper.get({'ifindex': cfg.ifindex}, dump=True) + ksft_eq(len(shapers), 0) + +def queue_update(cfg, nl_shaper) -> None: + if cfg.nr_queues < 4: + raise KsftSkipEx(f"netdev does not have enough queues min 4 reported {cfg.nr_queues}") + if not cfg.queues: + raise KsftSkipEx("device does not support queue scope") + + for i in range(3): + nl_shaper.set({'ifindex': cfg.ifindex, + 'handle': {'scope': 'queue', 'id': i}, + 'metric': 'bps', + 'bw-max': (i + 1) * 1000}) + # Delete a channel, with no shapers configured on top of the related + # queue: no changes expected + cmd(f"ethtool -L {cfg.dev['ifname']} {cfg.rx_type} 3", timeout=10) + shapers = nl_shaper.get({'ifindex': cfg.ifindex}, dump=True) + ksft_eq(shapers, [{'ifindex': cfg.ifindex, + 'parent': {'scope': 'netdev'}, + 'handle': {'scope': 'queue', 'id': 0}, + 'metric': 'bps', + 'bw-max': 1000}, + {'ifindex': cfg.ifindex, + 'parent': {'scope': 'netdev'}, + 'handle': {'scope': 'queue', 'id': 1}, + 'metric': 'bps', + 'bw-max': 2000}, + {'ifindex': cfg.ifindex, + 'parent': {'scope': 'netdev'}, + 'handle': {'scope': 'queue', 'id': 2}, + 'metric': 'bps', + 'bw-max': 3000}]) + + # Delete a channel, with a shaper configured on top of the related + # queue: the shaper must be deleted, too + cmd(f"ethtool -L {cfg.dev['ifname']} {cfg.rx_type} 2", timeout=10) + + shapers = nl_shaper.get({'ifindex': cfg.ifindex}, dump=True) + ksft_eq(shapers, [{'ifindex': cfg.ifindex, + 'parent': {'scope': 'netdev'}, + 'handle': {'scope': 'queue', 'id': 0}, + 'metric': 'bps', + 'bw-max': 1000}, + {'ifindex': cfg.ifindex, + 'parent': {'scope': 'netdev'}, + 'handle': {'scope': 'queue', 'id': 1}, + 'metric': 'bps', + 'bw-max': 2000}]) + + # Restore the original channels number, no expected changes + cmd(f"ethtool -L {cfg.dev['ifname']} {cfg.rx_type} {cfg.nr_queues}", timeout=10) + shapers = nl_shaper.get({'ifindex': cfg.ifindex}, dump=True) + ksft_eq(shapers, [{'ifindex': cfg.ifindex, + 'parent': {'scope': 'netdev'}, + 'handle': {'scope': 'queue', 'id': 0}, + 'metric': 'bps', + 'bw-max': 1000}, + {'ifindex': cfg.ifindex, + 'parent': {'scope': 'netdev'}, + 'handle': {'scope': 'queue', 'id': 1}, + 'metric': 'bps', + 'bw-max': 2000}]) + + # Final cleanup. + for i in range(0, 2): + nl_shaper.delete({'ifindex': cfg.ifindex, + 'handle': {'scope': 'queue', 'id': i}}) + +def main() -> None: + with NetDrvEnv(__file__, queue_count=4) as cfg: + cfg.queues = False + cfg.netdev = False + cfg.groups = False + cfg.nr_queues = 0 + ksft_run([get_shapers, + get_caps, + set_qshapers, + del_qshapers, + set_nshapers, + del_nshapers, + basic_groups, + qgroups, + delegation, + queue_update], args=(cfg, NetshaperFamily())) + ksft_exit() + + +if __name__ == "__main__": + main() diff --git a/tools/testing/selftests/drivers/net/stats.py b/tools/testing/selftests/drivers/net/stats.py new file mode 100755 index 000000000000..efcc1e10575b --- /dev/null +++ b/tools/testing/selftests/drivers/net/stats.py @@ -0,0 +1,274 @@ +#!/usr/bin/env python3 +# SPDX-License-Identifier: GPL-2.0 + +import errno +import subprocess +import time +from lib.py import ksft_run, ksft_exit, ksft_pr +from lib.py import ksft_ge, ksft_eq, ksft_is, ksft_in, ksft_lt, ksft_true, ksft_raises +from lib.py import KsftSkipEx, KsftXfailEx +from lib.py import ksft_disruptive +from lib.py import EthtoolFamily, NetdevFamily, RtnlFamily, NlError +from lib.py import NetDrvEnv +from lib.py import cmd, ip, defer + +ethnl = EthtoolFamily() +netfam = NetdevFamily() +rtnl = RtnlFamily() + + +def check_pause(cfg) -> None: + global ethnl + + try: + ethnl.pause_get({"header": {"dev-index": cfg.ifindex}}) + except NlError as e: + if e.error == errno.EOPNOTSUPP: + raise KsftXfailEx("pause not supported by the device") + raise + + data = ethnl.pause_get({"header": {"dev-index": cfg.ifindex, + "flags": {'stats'}}}) + ksft_true(data['stats'], "driver does not report stats") + + +def check_fec(cfg) -> None: + global ethnl + + try: + ethnl.fec_get({"header": {"dev-index": cfg.ifindex}}) + except NlError as e: + if e.error == errno.EOPNOTSUPP: + raise KsftXfailEx("FEC not supported by the device") + raise + + data = ethnl.fec_get({"header": {"dev-index": cfg.ifindex, + "flags": {'stats'}}}) + ksft_true(data['stats'], "driver does not report stats") + + +def pkt_byte_sum(cfg) -> None: + global netfam, rtnl + + def get_qstat(test): + global netfam + stats = netfam.qstats_get({}, dump=True) + if stats: + for qs in stats: + if qs["ifindex"]== test.ifindex: + return qs + + qstat = get_qstat(cfg) + if qstat is None: + raise KsftSkipEx("qstats not supported by the device") + + for key in ['tx-packets', 'tx-bytes', 'rx-packets', 'rx-bytes']: + ksft_in(key, qstat, "Drivers should always report basic keys") + + # Compare stats, rtnl stats and qstats must match, + # but the interface may be up, so do a series of dumps + # each time the more "recent" stats must be higher or same. + def stat_cmp(rstat, qstat): + for key in ['tx-packets', 'tx-bytes', 'rx-packets', 'rx-bytes']: + if rstat[key] != qstat[key]: + return rstat[key] - qstat[key] + return 0 + + for _ in range(10): + rtstat = rtnl.getlink({"ifi-index": cfg.ifindex})['stats64'] + if stat_cmp(rtstat, qstat) < 0: + raise Exception("RTNL stats are lower, fetched later") + qstat = get_qstat(cfg) + if stat_cmp(rtstat, qstat) > 0: + raise Exception("Qstats are lower, fetched later") + + +def qstat_by_ifindex(cfg) -> None: + global netfam + global rtnl + + # Construct a map ifindex -> [dump, by-index, dump] + ifindexes = {} + stats = netfam.qstats_get({}, dump=True) + for entry in stats: + ifindexes[entry['ifindex']] = [entry, None, None] + + for ifindex in ifindexes.keys(): + entry = netfam.qstats_get({"ifindex": ifindex}, dump=True) + ksft_eq(len(entry), 1) + ifindexes[entry[0]['ifindex']][1] = entry[0] + + stats = netfam.qstats_get({}, dump=True) + for entry in stats: + ifindexes[entry['ifindex']][2] = entry + + if len(ifindexes) == 0: + raise KsftSkipEx("No ifindex supports qstats") + + # Now make sure the stats match/make sense + for ifindex, triple in ifindexes.items(): + all_keys = triple[0].keys() | triple[1].keys() | triple[2].keys() + + for key in all_keys: + ksft_ge(triple[1][key], triple[0][key], comment="bad key: " + key) + ksft_ge(triple[2][key], triple[1][key], comment="bad key: " + key) + + # Sanity check the dumps + queues = NetdevFamily(recv_size=4096).qstats_get({"scope": "queue"}, dump=True) + # Reformat the output into {ifindex: {rx: [id, id, ...], tx: [id, id, ...]}} + parsed = {} + for entry in queues: + ifindex = entry["ifindex"] + if ifindex not in parsed: + parsed[ifindex] = {"rx":[], "tx": []} + parsed[ifindex][entry["queue-type"]].append(entry['queue-id']) + # Now, validate + for ifindex, queues in parsed.items(): + for qtype in ['rx', 'tx']: + ksft_eq(len(queues[qtype]), len(set(queues[qtype])), + comment="repeated queue keys") + ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1, + comment="missing queue keys") + + # Test invalid dumps + # 0 is invalid + with ksft_raises(NlError) as cm: + netfam.qstats_get({"ifindex": 0}, dump=True) + ksft_eq(cm.exception.nl_msg.error, -34) + ksft_eq(cm.exception.nl_msg.extack['bad-attr'], '.ifindex') + + # loopback has no stats + with ksft_raises(NlError) as cm: + netfam.qstats_get({"ifindex": 1}, dump=True) + ksft_eq(cm.exception.nl_msg.error, -errno.EOPNOTSUPP) + ksft_eq(cm.exception.nl_msg.extack['bad-attr'], '.ifindex') + + # Try to get stats for lowest unused ifindex but not 0 + devs = rtnl.getlink({}, dump=True) + all_ifindexes = set([dev["ifi-index"] for dev in devs]) + lowest = 2 + while lowest in all_ifindexes: + lowest += 1 + + with ksft_raises(NlError) as cm: + netfam.qstats_get({"ifindex": lowest}, dump=True) + ksft_eq(cm.exception.nl_msg.error, -19) + ksft_eq(cm.exception.nl_msg.extack['bad-attr'], '.ifindex') + + +@ksft_disruptive +def check_down(cfg) -> None: + try: + qstat = netfam.qstats_get({"ifindex": cfg.ifindex}, dump=True)[0] + except NlError as e: + if e.error == errno.EOPNOTSUPP: + raise KsftSkipEx("qstats not supported by the device") + raise + + ip(f"link set dev {cfg.dev['ifname']} down") + defer(ip, f"link set dev {cfg.dev['ifname']} up") + + qstat2 = netfam.qstats_get({"ifindex": cfg.ifindex}, dump=True)[0] + for k, v in qstat.items(): + ksft_ge(qstat2[k], qstat[k], comment=f"{k} went backwards on device down") + + # exercise per-queue API to make sure that "device down" state + # is handled correctly and doesn't crash + netfam.qstats_get({"ifindex": cfg.ifindex, "scope": "queue"}, dump=True) + + +def __run_inf_loop(body): + body = body.strip() + if body[-1] != ';': + body += ';' + + return subprocess.Popen(f"while true; do {body} done", shell=True, + stdout=subprocess.PIPE, stderr=subprocess.PIPE) + + +def __stats_increase_sanely(old, new) -> None: + for k in old.keys(): + ksft_ge(new[k], old[k]) + ksft_lt(new[k] - old[k], 1 << 31, comment="likely wrapping error") + + +def procfs_hammer(cfg) -> None: + """ + Reading stats via procfs only holds the RCU lock, which is not an exclusive + lock, make sure drivers can handle parallel reads of stats. + """ + one = __run_inf_loop("cat /proc/net/dev") + defer(one.kill) + two = __run_inf_loop("cat /proc/net/dev") + defer(two.kill) + + time.sleep(1) + # Make sure the processes are running + ksft_is(one.poll(), None) + ksft_is(two.poll(), None) + + rtstat1 = rtnl.getlink({"ifi-index": cfg.ifindex})['stats64'] + time.sleep(2) + rtstat2 = rtnl.getlink({"ifi-index": cfg.ifindex})['stats64'] + __stats_increase_sanely(rtstat1, rtstat2) + # defers will kill the loops + + +@ksft_disruptive +def procfs_downup_hammer(cfg) -> None: + """ + Reading stats via procfs only holds the RCU lock, drivers often try + to sleep when reading the stats, or don't protect against races. + """ + # Max out the queues, we'll flip between max and 1 + channels = ethnl.channels_get({'header': {'dev-index': cfg.ifindex}}) + if channels['combined-count'] == 0: + rx_type = 'rx' + else: + rx_type = 'combined' + cur_queue_cnt = channels[f'{rx_type}-count'] + max_queue_cnt = channels[f'{rx_type}-max'] + + cmd(f"ethtool -L {cfg.ifname} {rx_type} {max_queue_cnt}") + defer(cmd, f"ethtool -L {cfg.ifname} {rx_type} {cur_queue_cnt}") + + # Real test stats + stats = __run_inf_loop("cat /proc/net/dev") + defer(stats.kill) + + ipset = f"ip link set dev {cfg.ifname}" + defer(ip, f"link set dev {cfg.ifname} up") + # The "echo -n 1" lets us count iterations below + updown = f"{ipset} down; sleep 0.05; {ipset} up; sleep 0.05; " + \ + f"ethtool -L {cfg.ifname} {rx_type} 1; " + \ + f"ethtool -L {cfg.ifname} {rx_type} {max_queue_cnt}; " + \ + "echo -n 1" + updown = __run_inf_loop(updown) + kill_updown = defer(updown.kill) + + time.sleep(1) + # Make sure the processes are running + ksft_is(stats.poll(), None) + ksft_is(updown.poll(), None) + + rtstat1 = rtnl.getlink({"ifi-index": cfg.ifindex})['stats64'] + # We're looking for crashes, give it extra time + time.sleep(9) + rtstat2 = rtnl.getlink({"ifi-index": cfg.ifindex})['stats64'] + __stats_increase_sanely(rtstat1, rtstat2) + + kill_updown.exec() + stdout, _ = updown.communicate(timeout=5) + ksft_pr("completed up/down cycles:", len(stdout.decode('utf-8'))) + + +def main() -> None: + with NetDrvEnv(__file__, queue_count=100) as cfg: + ksft_run([check_pause, check_fec, pkt_byte_sum, qstat_by_ifindex, + check_down, procfs_hammer, procfs_downup_hammer], + args=(cfg, )) + ksft_exit() + + +if __name__ == "__main__": + main() diff --git a/tools/testing/selftests/drivers/net/team/Makefile b/tools/testing/selftests/drivers/net/team/Makefile index 2d5a76d99181..eaf6938f100e 100644 --- a/tools/testing/selftests/drivers/net/team/Makefile +++ b/tools/testing/selftests/drivers/net/team/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 # Makefile for net selftests -TEST_PROGS := dev_addr_lists.sh +TEST_PROGS := dev_addr_lists.sh propagation.sh TEST_INCLUDES := \ ../bonding/lag_lib.sh \ diff --git a/tools/testing/selftests/drivers/net/team/config b/tools/testing/selftests/drivers/net/team/config index b5e3a3aad4bf..636b3525b679 100644 --- a/tools/testing/selftests/drivers/net/team/config +++ b/tools/testing/selftests/drivers/net/team/config @@ -1,5 +1,6 @@ CONFIG_DUMMY=y CONFIG_IPV6=y CONFIG_MACVLAN=y +CONFIG_NETDEVSIM=m CONFIG_NET_TEAM=y CONFIG_NET_TEAM_MODE_LOADBALANCE=y diff --git a/tools/testing/selftests/drivers/net/team/propagation.sh b/tools/testing/selftests/drivers/net/team/propagation.sh new file mode 100755 index 000000000000..4bea75b79878 --- /dev/null +++ b/tools/testing/selftests/drivers/net/team/propagation.sh @@ -0,0 +1,80 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +set -e + +NSIM_LRO_ID=$((256 + RANDOM % 256)) +NSIM_LRO_SYS=/sys/bus/netdevsim/devices/netdevsim$NSIM_LRO_ID + +NSIM_DEV_SYS_NEW=/sys/bus/netdevsim/new_device +NSIM_DEV_SYS_DEL=/sys/bus/netdevsim/del_device + +cleanup() +{ + set +e + ip link del dummyteam &>/dev/null + ip link del team0 &>/dev/null + echo $NSIM_LRO_ID > $NSIM_DEV_SYS_DEL + modprobe -r netdevsim +} + +# Trigger LRO propagation to the lower. +# https://lore.kernel.org/netdev/aBvOpkIoxcr9PfDg@mini-arch/ +team_lro() +{ + # using netdevsim because it supports NETIF_F_LRO + NSIM_LRO_NAME=$(find $NSIM_LRO_SYS/net -maxdepth 1 -type d ! \ + -path $NSIM_LRO_SYS/net -exec basename {} \;) + + ip link add name team0 type team + ip link set $NSIM_LRO_NAME down + ip link set dev $NSIM_LRO_NAME master team0 + ip link set team0 up + ethtool -K team0 large-receive-offload off + + ip link del team0 +} + +# Trigger promisc propagation to the lower during IFLA_MASTER. +# https://lore.kernel.org/netdev/20250506032328.3003050-1-sdf@fomichev.me/ +team_promisc() +{ + ip link add name dummyteam type dummy + ip link add name team0 type team + ip link set dummyteam down + ip link set team0 promisc on + ip link set dev dummyteam master team0 + ip link set team0 up + + ip link del team0 + ip link del dummyteam +} + +# Trigger promisc propagation to the lower via netif_change_flags (aka +# ndo_change_rx_flags). +# https://lore.kernel.org/netdev/20250514220319.3505158-1-stfomichev@gmail.com/ +team_change_flags() +{ + ip link add name dummyteam type dummy + ip link add name team0 type team + ip link set dummyteam down + ip link set dev dummyteam master team0 + ip link set team0 up + ip link set team0 promisc on + + # Make sure we can add more L2 addresses without any issues. + ip link add link team0 address 00:00:00:00:00:01 team0.1 type macvlan + ip link set team0.1 up + + ip link del team0.1 + ip link del team0 + ip link del dummyteam +} + +trap cleanup EXIT +modprobe netdevsim || : +echo $NSIM_LRO_ID > $NSIM_DEV_SYS_NEW +udevadm settle +team_lro +team_promisc +team_change_flags diff --git a/tools/testing/selftests/drivers/net/virtio_net/Makefile b/tools/testing/selftests/drivers/net/virtio_net/Makefile new file mode 100644 index 000000000000..7ec7cd3ab2cc --- /dev/null +++ b/tools/testing/selftests/drivers/net/virtio_net/Makefile @@ -0,0 +1,15 @@ +# SPDX-License-Identifier: GPL-2.0+ OR MIT + +TEST_PROGS = basic_features.sh \ + # + +TEST_FILES = \ + virtio_net_common.sh \ + # + +TEST_INCLUDES = \ + ../../../net/forwarding/lib.sh \ + ../../../net/lib.sh \ + # + +include ../../../lib.mk diff --git a/tools/testing/selftests/drivers/net/virtio_net/basic_features.sh b/tools/testing/selftests/drivers/net/virtio_net/basic_features.sh new file mode 100755 index 000000000000..cf8cf816ed48 --- /dev/null +++ b/tools/testing/selftests/drivers/net/virtio_net/basic_features.sh @@ -0,0 +1,131 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# See virtio_net_common.sh comments for more details about assumed setup + +ALL_TESTS=" + initial_ping_test + f_mac_test +" + +source virtio_net_common.sh + +lib_dir=$(dirname "$0") +source "$lib_dir"/../../../net/forwarding/lib.sh + +h1=${NETIFS[p1]} +h2=${NETIFS[p2]} + +h1_create() +{ + simple_if_init $h1 $H1_IPV4/24 $H1_IPV6/64 +} + +h1_destroy() +{ + simple_if_fini $h1 $H1_IPV4/24 $H1_IPV6/64 +} + +h2_create() +{ + simple_if_init $h2 $H2_IPV4/24 $H2_IPV6/64 +} + +h2_destroy() +{ + simple_if_fini $h2 $H2_IPV4/24 $H2_IPV6/64 +} + +initial_ping_test() +{ + setup_cleanup + setup_prepare + ping_test $h1 $H2_IPV4 " simple" +} + +f_mac_test() +{ + RET=0 + local test_name="mac feature filtered" + + virtio_feature_present $h1 $VIRTIO_NET_F_MAC + if [ $? -ne 0 ]; then + log_test_skip "$test_name" "Device $h1 is missing feature $VIRTIO_NET_F_MAC." + return 0 + fi + virtio_feature_present $h1 $VIRTIO_NET_F_MAC + if [ $? -ne 0 ]; then + log_test_skip "$test_name" "Device $h2 is missing feature $VIRTIO_NET_F_MAC." + return 0 + fi + + setup_cleanup + setup_prepare + + grep -q 0 /sys/class/net/$h1/addr_assign_type + check_err $? "Permanent address assign type for $h1 is not set" + grep -q 0 /sys/class/net/$h2/addr_assign_type + check_err $? "Permanent address assign type for $h2 is not set" + + setup_cleanup + virtio_filter_feature_add $h1 $VIRTIO_NET_F_MAC + virtio_filter_feature_add $h2 $VIRTIO_NET_F_MAC + setup_prepare + + grep -q 0 /sys/class/net/$h1/addr_assign_type + check_fail $? "Permanent address assign type for $h1 is set when F_MAC feature is filtered" + grep -q 0 /sys/class/net/$h2/addr_assign_type + check_fail $? "Permanent address assign type for $h2 is set when F_MAC feature is filtered" + + ping_do $h1 $H2_IPV4 + check_err $? "Ping failed" + + log_test "$test_name" +} + +setup_prepare() +{ + virtio_device_rebind $h1 + virtio_device_rebind $h2 + wait_for_dev $h1 + wait_for_dev $h2 + + vrf_prepare + + h1_create + h2_create +} + +setup_cleanup() +{ + h2_destroy + h1_destroy + + vrf_cleanup + + virtio_filter_features_clear $h1 + virtio_filter_features_clear $h2 + virtio_device_rebind $h1 + virtio_device_rebind $h2 + wait_for_dev $h1 + wait_for_dev $h2 +} + +cleanup() +{ + pre_cleanup + setup_cleanup +} + +check_driver $h1 "virtio_net" +check_driver $h2 "virtio_net" +check_virtio_debugfs $h1 +check_virtio_debugfs $h2 + +trap cleanup EXIT + +setup_prepare + +tests_run + +exit "$EXIT_STATUS" diff --git a/tools/testing/selftests/drivers/net/virtio_net/config b/tools/testing/selftests/drivers/net/virtio_net/config new file mode 100644 index 000000000000..bcf7555eaffe --- /dev/null +++ b/tools/testing/selftests/drivers/net/virtio_net/config @@ -0,0 +1,8 @@ +CONFIG_BPF_SYSCALL=y +CONFIG_CGROUP_BPF=y +CONFIG_IPV6=y +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_NET_L3_MASTER_DEV=y +CONFIG_NET_VRF=m +CONFIG_VIRTIO_DEBUG=y +CONFIG_VIRTIO_NET=y diff --git a/tools/testing/selftests/drivers/net/virtio_net/virtio_net_common.sh b/tools/testing/selftests/drivers/net/virtio_net/virtio_net_common.sh new file mode 100644 index 000000000000..57bd8055e2e5 --- /dev/null +++ b/tools/testing/selftests/drivers/net/virtio_net/virtio_net_common.sh @@ -0,0 +1,99 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# This assumes running on a host with two virtio interfaces connected +# back to back. Example script to do such wire-up of tap devices would +# look like this: +# +# ======================================================================================================= +# #!/bin/bash +# +# DEV1="$1" +# DEV2="$2" +# +# sudo tc qdisc add dev $DEV1 clsact +# sudo tc qdisc add dev $DEV2 clsact +# sudo tc filter add dev $DEV1 ingress protocol all pref 1 matchall action mirred egress redirect dev $DEV2 +# sudo tc filter add dev $DEV2 ingress protocol all pref 1 matchall action mirred egress redirect dev $DEV1 +# sudo ip link set $DEV1 up +# sudo ip link set $DEV2 up +# ======================================================================================================= + +REQUIRE_MZ="no" +NETIF_CREATE="no" +NETIF_FIND_DRIVER="virtio_net" +NUM_NETIFS=2 + +H1_IPV4="192.0.2.1" +H2_IPV4="192.0.2.2" +H1_IPV6="2001:db8:1::1" +H2_IPV6="2001:db8:1::2" + +VIRTIO_NET_F_MAC=5 + +virtio_device_get() +{ + local dev=$1; shift + local device_path="/sys/class/net/$dev/device/" + + basename `realpath $device_path` +} + +virtio_device_rebind() +{ + local dev=$1; shift + local device=`virtio_device_get $dev` + + echo "$device" > /sys/bus/virtio/drivers/virtio_net/unbind + echo "$device" > /sys/bus/virtio/drivers/virtio_net/bind +} + +virtio_debugfs_get() +{ + local dev=$1; shift + local device=`virtio_device_get $dev` + + echo /sys/kernel/debug/virtio/$device/ +} + +check_virtio_debugfs() +{ + local dev=$1; shift + local debugfs=`virtio_debugfs_get $dev` + + if [ ! -f "$debugfs/device_features" ] || + [ ! -f "$debugfs/filter_feature_add" ] || + [ ! -f "$debugfs/filter_feature_del" ] || + [ ! -f "$debugfs/filter_features" ] || + [ ! -f "$debugfs/filter_features_clear" ]; then + echo "SKIP: not possible to access debugfs for $dev" + exit $ksft_skip + fi +} + +virtio_feature_present() +{ + local dev=$1; shift + local feature=$1; shift + local debugfs=`virtio_debugfs_get $dev` + + cat $debugfs/device_features |grep "^$feature$" &> /dev/null + return $? +} + +virtio_filter_features_clear() +{ + local dev=$1; shift + local debugfs=`virtio_debugfs_get $dev` + + echo "1" > $debugfs/filter_features_clear +} + +virtio_filter_feature_add() +{ + local dev=$1; shift + local feature=$1; shift + local debugfs=`virtio_debugfs_get $dev` + + echo "$feature" > $debugfs/filter_feature_add +} diff --git a/tools/testing/selftests/drivers/ntsync/.gitignore b/tools/testing/selftests/drivers/ntsync/.gitignore new file mode 100644 index 000000000000..848573a3d3ea --- /dev/null +++ b/tools/testing/selftests/drivers/ntsync/.gitignore @@ -0,0 +1 @@ +ntsync diff --git a/tools/testing/selftests/drivers/ntsync/Makefile b/tools/testing/selftests/drivers/ntsync/Makefile new file mode 100644 index 000000000000..dbf2b055c0b2 --- /dev/null +++ b/tools/testing/selftests/drivers/ntsync/Makefile @@ -0,0 +1,7 @@ +# SPDX-LICENSE-IDENTIFIER: GPL-2.0-only +TEST_GEN_PROGS := ntsync + +CFLAGS += $(KHDR_INCLUDES) +LDLIBS += -lpthread + +include ../../lib.mk diff --git a/tools/testing/selftests/drivers/ntsync/config b/tools/testing/selftests/drivers/ntsync/config new file mode 100644 index 000000000000..60539c826d06 --- /dev/null +++ b/tools/testing/selftests/drivers/ntsync/config @@ -0,0 +1 @@ +CONFIG_WINESYNC=y diff --git a/tools/testing/selftests/drivers/ntsync/ntsync.c b/tools/testing/selftests/drivers/ntsync/ntsync.c new file mode 100644 index 000000000000..3aad311574c4 --- /dev/null +++ b/tools/testing/selftests/drivers/ntsync/ntsync.c @@ -0,0 +1,1343 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Various unit tests for the "ntsync" synchronization primitive driver. + * + * Copyright (C) 2021-2022 Elizabeth Figura <zfigura@codeweavers.com> + */ + +#define _GNU_SOURCE +#include <sys/ioctl.h> +#include <sys/stat.h> +#include <fcntl.h> +#include <time.h> +#include <pthread.h> +#include <linux/ntsync.h> +#include "../../kselftest_harness.h" + +static int read_sem_state(int sem, __u32 *count, __u32 *max) +{ + struct ntsync_sem_args args; + int ret; + + memset(&args, 0xcc, sizeof(args)); + ret = ioctl(sem, NTSYNC_IOC_SEM_READ, &args); + *count = args.count; + *max = args.max; + return ret; +} + +#define check_sem_state(sem, count, max) \ + ({ \ + __u32 __count, __max; \ + int ret = read_sem_state((sem), &__count, &__max); \ + EXPECT_EQ(0, ret); \ + EXPECT_EQ((count), __count); \ + EXPECT_EQ((max), __max); \ + }) + +static int release_sem(int sem, __u32 *count) +{ + return ioctl(sem, NTSYNC_IOC_SEM_RELEASE, count); +} + +static int read_mutex_state(int mutex, __u32 *count, __u32 *owner) +{ + struct ntsync_mutex_args args; + int ret; + + memset(&args, 0xcc, sizeof(args)); + ret = ioctl(mutex, NTSYNC_IOC_MUTEX_READ, &args); + *count = args.count; + *owner = args.owner; + return ret; +} + +#define check_mutex_state(mutex, count, owner) \ + ({ \ + __u32 __count, __owner; \ + int ret = read_mutex_state((mutex), &__count, &__owner); \ + EXPECT_EQ(0, ret); \ + EXPECT_EQ((count), __count); \ + EXPECT_EQ((owner), __owner); \ + }) + +static int unlock_mutex(int mutex, __u32 owner, __u32 *count) +{ + struct ntsync_mutex_args args; + int ret; + + args.owner = owner; + args.count = 0xdeadbeef; + ret = ioctl(mutex, NTSYNC_IOC_MUTEX_UNLOCK, &args); + *count = args.count; + return ret; +} + +static int read_event_state(int event, __u32 *signaled, __u32 *manual) +{ + struct ntsync_event_args args; + int ret; + + memset(&args, 0xcc, sizeof(args)); + ret = ioctl(event, NTSYNC_IOC_EVENT_READ, &args); + *signaled = args.signaled; + *manual = args.manual; + return ret; +} + +#define check_event_state(event, signaled, manual) \ + ({ \ + __u32 __signaled, __manual; \ + int ret = read_event_state((event), &__signaled, &__manual); \ + EXPECT_EQ(0, ret); \ + EXPECT_EQ((signaled), __signaled); \ + EXPECT_EQ((manual), __manual); \ + }) + +static int wait_objs(int fd, unsigned long request, __u32 count, + const int *objs, __u32 owner, int alert, __u32 *index) +{ + struct ntsync_wait_args args = {0}; + struct timespec timeout; + int ret; + + clock_gettime(CLOCK_MONOTONIC, &timeout); + + args.timeout = timeout.tv_sec * 1000000000 + timeout.tv_nsec; + args.count = count; + args.objs = (uintptr_t)objs; + args.owner = owner; + args.index = 0xdeadbeef; + args.alert = alert; + ret = ioctl(fd, request, &args); + *index = args.index; + return ret; +} + +static int wait_any(int fd, __u32 count, const int *objs, __u32 owner, __u32 *index) +{ + return wait_objs(fd, NTSYNC_IOC_WAIT_ANY, count, objs, owner, 0, index); +} + +static int wait_all(int fd, __u32 count, const int *objs, __u32 owner, __u32 *index) +{ + return wait_objs(fd, NTSYNC_IOC_WAIT_ALL, count, objs, owner, 0, index); +} + +static int wait_any_alert(int fd, __u32 count, const int *objs, + __u32 owner, int alert, __u32 *index) +{ + return wait_objs(fd, NTSYNC_IOC_WAIT_ANY, + count, objs, owner, alert, index); +} + +static int wait_all_alert(int fd, __u32 count, const int *objs, + __u32 owner, int alert, __u32 *index) +{ + return wait_objs(fd, NTSYNC_IOC_WAIT_ALL, + count, objs, owner, alert, index); +} + +TEST(semaphore_state) +{ + struct ntsync_sem_args sem_args; + struct timespec timeout; + __u32 count, index; + int fd, ret, sem; + + clock_gettime(CLOCK_MONOTONIC, &timeout); + + fd = open("/dev/ntsync", O_CLOEXEC | O_RDONLY); + ASSERT_LE(0, fd); + + sem_args.count = 3; + sem_args.max = 2; + sem = ioctl(fd, NTSYNC_IOC_CREATE_SEM, &sem_args); + EXPECT_EQ(-1, sem); + EXPECT_EQ(EINVAL, errno); + + sem_args.count = 2; + sem_args.max = 2; + sem = ioctl(fd, NTSYNC_IOC_CREATE_SEM, &sem_args); + EXPECT_LE(0, sem); + check_sem_state(sem, 2, 2); + + count = 0; + ret = release_sem(sem, &count); + EXPECT_EQ(0, ret); + EXPECT_EQ(2, count); + check_sem_state(sem, 2, 2); + + count = 1; + ret = release_sem(sem, &count); + EXPECT_EQ(-1, ret); + EXPECT_EQ(EOVERFLOW, errno); + check_sem_state(sem, 2, 2); + + ret = wait_any(fd, 1, &sem, 123, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, index); + check_sem_state(sem, 1, 2); + + ret = wait_any(fd, 1, &sem, 123, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, index); + check_sem_state(sem, 0, 2); + + ret = wait_any(fd, 1, &sem, 123, &index); + EXPECT_EQ(-1, ret); + EXPECT_EQ(ETIMEDOUT, errno); + + count = 3; + ret = release_sem(sem, &count); + EXPECT_EQ(-1, ret); + EXPECT_EQ(EOVERFLOW, errno); + check_sem_state(sem, 0, 2); + + count = 2; + ret = release_sem(sem, &count); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, count); + check_sem_state(sem, 2, 2); + + ret = wait_any(fd, 1, &sem, 123, &index); + EXPECT_EQ(0, ret); + ret = wait_any(fd, 1, &sem, 123, &index); + EXPECT_EQ(0, ret); + + count = 1; + ret = release_sem(sem, &count); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, count); + check_sem_state(sem, 1, 2); + + count = ~0u; + ret = release_sem(sem, &count); + EXPECT_EQ(-1, ret); + EXPECT_EQ(EOVERFLOW, errno); + check_sem_state(sem, 1, 2); + + close(sem); + + close(fd); +} + +TEST(mutex_state) +{ + struct ntsync_mutex_args mutex_args; + __u32 owner, count, index; + struct timespec timeout; + int fd, ret, mutex; + + clock_gettime(CLOCK_MONOTONIC, &timeout); + + fd = open("/dev/ntsync", O_CLOEXEC | O_RDONLY); + ASSERT_LE(0, fd); + + mutex_args.owner = 123; + mutex_args.count = 0; + mutex = ioctl(fd, NTSYNC_IOC_CREATE_MUTEX, &mutex_args); + EXPECT_EQ(-1, mutex); + EXPECT_EQ(EINVAL, errno); + + mutex_args.owner = 0; + mutex_args.count = 2; + mutex = ioctl(fd, NTSYNC_IOC_CREATE_MUTEX, &mutex_args); + EXPECT_EQ(-1, mutex); + EXPECT_EQ(EINVAL, errno); + + mutex_args.owner = 123; + mutex_args.count = 2; + mutex = ioctl(fd, NTSYNC_IOC_CREATE_MUTEX, &mutex_args); + EXPECT_LE(0, mutex); + check_mutex_state(mutex, 2, 123); + + ret = unlock_mutex(mutex, 0, &count); + EXPECT_EQ(-1, ret); + EXPECT_EQ(EINVAL, errno); + + ret = unlock_mutex(mutex, 456, &count); + EXPECT_EQ(-1, ret); + EXPECT_EQ(EPERM, errno); + check_mutex_state(mutex, 2, 123); + + ret = unlock_mutex(mutex, 123, &count); + EXPECT_EQ(0, ret); + EXPECT_EQ(2, count); + check_mutex_state(mutex, 1, 123); + + ret = unlock_mutex(mutex, 123, &count); + EXPECT_EQ(0, ret); + EXPECT_EQ(1, count); + check_mutex_state(mutex, 0, 0); + + ret = unlock_mutex(mutex, 123, &count); + EXPECT_EQ(-1, ret); + EXPECT_EQ(EPERM, errno); + + ret = wait_any(fd, 1, &mutex, 456, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, index); + check_mutex_state(mutex, 1, 456); + + ret = wait_any(fd, 1, &mutex, 456, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, index); + check_mutex_state(mutex, 2, 456); + + ret = unlock_mutex(mutex, 456, &count); + EXPECT_EQ(0, ret); + EXPECT_EQ(2, count); + check_mutex_state(mutex, 1, 456); + + ret = wait_any(fd, 1, &mutex, 123, &index); + EXPECT_EQ(-1, ret); + EXPECT_EQ(ETIMEDOUT, errno); + + owner = 0; + ret = ioctl(mutex, NTSYNC_IOC_MUTEX_KILL, &owner); + EXPECT_EQ(-1, ret); + EXPECT_EQ(EINVAL, errno); + + owner = 123; + ret = ioctl(mutex, NTSYNC_IOC_MUTEX_KILL, &owner); + EXPECT_EQ(-1, ret); + EXPECT_EQ(EPERM, errno); + check_mutex_state(mutex, 1, 456); + + owner = 456; + ret = ioctl(mutex, NTSYNC_IOC_MUTEX_KILL, &owner); + EXPECT_EQ(0, ret); + + memset(&mutex_args, 0xcc, sizeof(mutex_args)); + ret = ioctl(mutex, NTSYNC_IOC_MUTEX_READ, &mutex_args); + EXPECT_EQ(-1, ret); + EXPECT_EQ(EOWNERDEAD, errno); + EXPECT_EQ(0, mutex_args.count); + EXPECT_EQ(0, mutex_args.owner); + + memset(&mutex_args, 0xcc, sizeof(mutex_args)); + ret = ioctl(mutex, NTSYNC_IOC_MUTEX_READ, &mutex_args); + EXPECT_EQ(-1, ret); + EXPECT_EQ(EOWNERDEAD, errno); + EXPECT_EQ(0, mutex_args.count); + EXPECT_EQ(0, mutex_args.owner); + + ret = wait_any(fd, 1, &mutex, 123, &index); + EXPECT_EQ(-1, ret); + EXPECT_EQ(EOWNERDEAD, errno); + EXPECT_EQ(0, index); + check_mutex_state(mutex, 1, 123); + + owner = 123; + ret = ioctl(mutex, NTSYNC_IOC_MUTEX_KILL, &owner); + EXPECT_EQ(0, ret); + + memset(&mutex_args, 0xcc, sizeof(mutex_args)); + ret = ioctl(mutex, NTSYNC_IOC_MUTEX_READ, &mutex_args); + EXPECT_EQ(-1, ret); + EXPECT_EQ(EOWNERDEAD, errno); + EXPECT_EQ(0, mutex_args.count); + EXPECT_EQ(0, mutex_args.owner); + + ret = wait_any(fd, 1, &mutex, 123, &index); + EXPECT_EQ(-1, ret); + EXPECT_EQ(EOWNERDEAD, errno); + EXPECT_EQ(0, index); + check_mutex_state(mutex, 1, 123); + + close(mutex); + + mutex_args.owner = 0; + mutex_args.count = 0; + mutex = ioctl(fd, NTSYNC_IOC_CREATE_MUTEX, &mutex_args); + EXPECT_LE(0, mutex); + check_mutex_state(mutex, 0, 0); + + ret = wait_any(fd, 1, &mutex, 123, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, index); + check_mutex_state(mutex, 1, 123); + + close(mutex); + + mutex_args.owner = 123; + mutex_args.count = ~0u; + mutex = ioctl(fd, NTSYNC_IOC_CREATE_MUTEX, &mutex_args); + EXPECT_LE(0, mutex); + check_mutex_state(mutex, ~0u, 123); + + ret = wait_any(fd, 1, &mutex, 123, &index); + EXPECT_EQ(-1, ret); + EXPECT_EQ(ETIMEDOUT, errno); + + close(mutex); + + close(fd); +} + +TEST(manual_event_state) +{ + struct ntsync_event_args event_args; + __u32 index, signaled; + int fd, event, ret; + + fd = open("/dev/ntsync", O_CLOEXEC | O_RDONLY); + ASSERT_LE(0, fd); + + event_args.manual = 1; + event_args.signaled = 0; + event = ioctl(fd, NTSYNC_IOC_CREATE_EVENT, &event_args); + EXPECT_LE(0, event); + check_event_state(event, 0, 1); + + signaled = 0xdeadbeef; + ret = ioctl(event, NTSYNC_IOC_EVENT_SET, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, signaled); + check_event_state(event, 1, 1); + + ret = ioctl(event, NTSYNC_IOC_EVENT_SET, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(1, signaled); + check_event_state(event, 1, 1); + + ret = wait_any(fd, 1, &event, 123, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, index); + check_event_state(event, 1, 1); + + signaled = 0xdeadbeef; + ret = ioctl(event, NTSYNC_IOC_EVENT_RESET, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(1, signaled); + check_event_state(event, 0, 1); + + ret = ioctl(event, NTSYNC_IOC_EVENT_RESET, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, signaled); + check_event_state(event, 0, 1); + + ret = wait_any(fd, 1, &event, 123, &index); + EXPECT_EQ(-1, ret); + EXPECT_EQ(ETIMEDOUT, errno); + + ret = ioctl(event, NTSYNC_IOC_EVENT_SET, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, signaled); + + ret = ioctl(event, NTSYNC_IOC_EVENT_PULSE, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(1, signaled); + check_event_state(event, 0, 1); + + ret = ioctl(event, NTSYNC_IOC_EVENT_PULSE, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, signaled); + check_event_state(event, 0, 1); + + close(event); + + close(fd); +} + +TEST(auto_event_state) +{ + struct ntsync_event_args event_args; + __u32 index, signaled; + int fd, event, ret; + + fd = open("/dev/ntsync", O_CLOEXEC | O_RDONLY); + ASSERT_LE(0, fd); + + event_args.manual = 0; + event_args.signaled = 1; + event = ioctl(fd, NTSYNC_IOC_CREATE_EVENT, &event_args); + EXPECT_LE(0, event); + + check_event_state(event, 1, 0); + + signaled = 0xdeadbeef; + ret = ioctl(event, NTSYNC_IOC_EVENT_SET, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(1, signaled); + check_event_state(event, 1, 0); + + ret = wait_any(fd, 1, &event, 123, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, index); + check_event_state(event, 0, 0); + + signaled = 0xdeadbeef; + ret = ioctl(event, NTSYNC_IOC_EVENT_RESET, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, signaled); + check_event_state(event, 0, 0); + + ret = wait_any(fd, 1, &event, 123, &index); + EXPECT_EQ(-1, ret); + EXPECT_EQ(ETIMEDOUT, errno); + + ret = ioctl(event, NTSYNC_IOC_EVENT_SET, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, signaled); + + ret = ioctl(event, NTSYNC_IOC_EVENT_PULSE, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(1, signaled); + check_event_state(event, 0, 0); + + ret = ioctl(event, NTSYNC_IOC_EVENT_PULSE, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, signaled); + check_event_state(event, 0, 0); + + close(event); + + close(fd); +} + +TEST(test_wait_any) +{ + int objs[NTSYNC_MAX_WAIT_COUNT + 1], fd, ret; + struct ntsync_mutex_args mutex_args = {0}; + struct ntsync_sem_args sem_args = {0}; + __u32 owner, index, count, i; + struct timespec timeout; + + clock_gettime(CLOCK_MONOTONIC, &timeout); + + fd = open("/dev/ntsync", O_CLOEXEC | O_RDONLY); + ASSERT_LE(0, fd); + + sem_args.count = 2; + sem_args.max = 3; + objs[0] = ioctl(fd, NTSYNC_IOC_CREATE_SEM, &sem_args); + EXPECT_LE(0, objs[0]); + + mutex_args.owner = 0; + mutex_args.count = 0; + objs[1] = ioctl(fd, NTSYNC_IOC_CREATE_MUTEX, &mutex_args); + EXPECT_LE(0, objs[1]); + + ret = wait_any(fd, 2, objs, 123, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, index); + check_sem_state(objs[0], 1, 3); + check_mutex_state(objs[1], 0, 0); + + ret = wait_any(fd, 2, objs, 123, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, index); + check_sem_state(objs[0], 0, 3); + check_mutex_state(objs[1], 0, 0); + + ret = wait_any(fd, 2, objs, 123, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(1, index); + check_sem_state(objs[0], 0, 3); + check_mutex_state(objs[1], 1, 123); + + count = 1; + ret = release_sem(objs[0], &count); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, count); + + ret = wait_any(fd, 2, objs, 123, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, index); + check_sem_state(objs[0], 0, 3); + check_mutex_state(objs[1], 1, 123); + + ret = wait_any(fd, 2, objs, 123, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(1, index); + check_sem_state(objs[0], 0, 3); + check_mutex_state(objs[1], 2, 123); + + ret = wait_any(fd, 2, objs, 456, &index); + EXPECT_EQ(-1, ret); + EXPECT_EQ(ETIMEDOUT, errno); + + owner = 123; + ret = ioctl(objs[1], NTSYNC_IOC_MUTEX_KILL, &owner); + EXPECT_EQ(0, ret); + + ret = wait_any(fd, 2, objs, 456, &index); + EXPECT_EQ(-1, ret); + EXPECT_EQ(EOWNERDEAD, errno); + EXPECT_EQ(1, index); + + ret = wait_any(fd, 2, objs, 456, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(1, index); + + close(objs[1]); + + /* test waiting on the same object twice */ + + count = 2; + ret = release_sem(objs[0], &count); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, count); + + objs[1] = objs[0]; + ret = wait_any(fd, 2, objs, 456, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, index); + check_sem_state(objs[0], 1, 3); + + ret = wait_any(fd, 0, NULL, 456, &index); + EXPECT_EQ(-1, ret); + EXPECT_EQ(ETIMEDOUT, errno); + + for (i = 1; i < NTSYNC_MAX_WAIT_COUNT + 1; ++i) + objs[i] = objs[0]; + + ret = wait_any(fd, NTSYNC_MAX_WAIT_COUNT, objs, 123, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, index); + + ret = wait_any(fd, NTSYNC_MAX_WAIT_COUNT + 1, objs, 123, &index); + EXPECT_EQ(-1, ret); + EXPECT_EQ(EINVAL, errno); + + ret = wait_any(fd, -1, objs, 123, &index); + EXPECT_EQ(-1, ret); + EXPECT_EQ(EINVAL, errno); + + close(objs[0]); + + close(fd); +} + +TEST(test_wait_all) +{ + struct ntsync_event_args event_args = {0}; + struct ntsync_mutex_args mutex_args = {0}; + struct ntsync_sem_args sem_args = {0}; + __u32 owner, index, count; + int objs[2], fd, ret; + + fd = open("/dev/ntsync", O_CLOEXEC | O_RDONLY); + ASSERT_LE(0, fd); + + sem_args.count = 2; + sem_args.max = 3; + objs[0] = ioctl(fd, NTSYNC_IOC_CREATE_SEM, &sem_args); + EXPECT_LE(0, objs[0]); + + mutex_args.owner = 0; + mutex_args.count = 0; + objs[1] = ioctl(fd, NTSYNC_IOC_CREATE_MUTEX, &mutex_args); + EXPECT_LE(0, objs[1]); + + ret = wait_all(fd, 2, objs, 123, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, index); + check_sem_state(objs[0], 1, 3); + check_mutex_state(objs[1], 1, 123); + + ret = wait_all(fd, 2, objs, 456, &index); + EXPECT_EQ(-1, ret); + EXPECT_EQ(ETIMEDOUT, errno); + check_sem_state(objs[0], 1, 3); + check_mutex_state(objs[1], 1, 123); + + ret = wait_all(fd, 2, objs, 123, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, index); + check_sem_state(objs[0], 0, 3); + check_mutex_state(objs[1], 2, 123); + + ret = wait_all(fd, 2, objs, 123, &index); + EXPECT_EQ(-1, ret); + EXPECT_EQ(ETIMEDOUT, errno); + check_sem_state(objs[0], 0, 3); + check_mutex_state(objs[1], 2, 123); + + count = 3; + ret = release_sem(objs[0], &count); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, count); + + ret = wait_all(fd, 2, objs, 123, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, index); + check_sem_state(objs[0], 2, 3); + check_mutex_state(objs[1], 3, 123); + + owner = 123; + ret = ioctl(objs[1], NTSYNC_IOC_MUTEX_KILL, &owner); + EXPECT_EQ(0, ret); + + ret = wait_all(fd, 2, objs, 123, &index); + EXPECT_EQ(-1, ret); + EXPECT_EQ(EOWNERDEAD, errno); + check_sem_state(objs[0], 1, 3); + check_mutex_state(objs[1], 1, 123); + + close(objs[1]); + + event_args.manual = true; + event_args.signaled = true; + objs[1] = ioctl(fd, NTSYNC_IOC_CREATE_EVENT, &event_args); + EXPECT_LE(0, objs[1]); + + ret = wait_all(fd, 2, objs, 123, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, index); + check_sem_state(objs[0], 0, 3); + check_event_state(objs[1], 1, 1); + + close(objs[1]); + + /* test waiting on the same object twice */ + objs[1] = objs[0]; + ret = wait_all(fd, 2, objs, 123, &index); + EXPECT_EQ(-1, ret); + EXPECT_EQ(EINVAL, errno); + + close(objs[0]); + + close(fd); +} + +struct wake_args { + int fd; + int obj; +}; + +struct wait_args { + int fd; + unsigned long request; + struct ntsync_wait_args *args; + int ret; + int err; +}; + +static void *wait_thread(void *arg) +{ + struct wait_args *args = arg; + + args->ret = ioctl(args->fd, args->request, args->args); + args->err = errno; + return NULL; +} + +static __u64 get_abs_timeout(unsigned int ms) +{ + struct timespec timeout; + clock_gettime(CLOCK_MONOTONIC, &timeout); + return (timeout.tv_sec * 1000000000) + timeout.tv_nsec + (ms * 1000000); +} + +static int wait_for_thread(pthread_t thread, unsigned int ms) +{ + struct timespec timeout; + + clock_gettime(CLOCK_REALTIME, &timeout); + timeout.tv_nsec += ms * 1000000; + timeout.tv_sec += (timeout.tv_nsec / 1000000000); + timeout.tv_nsec %= 1000000000; + return pthread_timedjoin_np(thread, NULL, &timeout); +} + +TEST(wake_any) +{ + struct ntsync_event_args event_args = {0}; + struct ntsync_mutex_args mutex_args = {0}; + struct ntsync_wait_args wait_args = {0}; + struct ntsync_sem_args sem_args = {0}; + struct wait_args thread_args; + __u32 count, index, signaled; + int objs[2], fd, ret; + pthread_t thread; + + fd = open("/dev/ntsync", O_CLOEXEC | O_RDONLY); + ASSERT_LE(0, fd); + + sem_args.count = 0; + sem_args.max = 3; + objs[0] = ioctl(fd, NTSYNC_IOC_CREATE_SEM, &sem_args); + EXPECT_LE(0, objs[0]); + + mutex_args.owner = 123; + mutex_args.count = 1; + objs[1] = ioctl(fd, NTSYNC_IOC_CREATE_MUTEX, &mutex_args); + EXPECT_LE(0, objs[1]); + + /* test waking the semaphore */ + + wait_args.timeout = get_abs_timeout(1000); + wait_args.objs = (uintptr_t)objs; + wait_args.count = 2; + wait_args.owner = 456; + wait_args.index = 0xdeadbeef; + thread_args.fd = fd; + thread_args.args = &wait_args; + thread_args.request = NTSYNC_IOC_WAIT_ANY; + ret = pthread_create(&thread, NULL, wait_thread, &thread_args); + EXPECT_EQ(0, ret); + + ret = wait_for_thread(thread, 100); + EXPECT_EQ(ETIMEDOUT, ret); + + count = 1; + ret = release_sem(objs[0], &count); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, count); + check_sem_state(objs[0], 0, 3); + + ret = wait_for_thread(thread, 100); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, thread_args.ret); + EXPECT_EQ(0, wait_args.index); + + /* test waking the mutex */ + + /* first grab it again for owner 123 */ + ret = wait_any(fd, 1, &objs[1], 123, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, index); + + wait_args.timeout = get_abs_timeout(1000); + wait_args.owner = 456; + ret = pthread_create(&thread, NULL, wait_thread, &thread_args); + EXPECT_EQ(0, ret); + + ret = wait_for_thread(thread, 100); + EXPECT_EQ(ETIMEDOUT, ret); + + ret = unlock_mutex(objs[1], 123, &count); + EXPECT_EQ(0, ret); + EXPECT_EQ(2, count); + + ret = pthread_tryjoin_np(thread, NULL); + EXPECT_EQ(EBUSY, ret); + + ret = unlock_mutex(objs[1], 123, &count); + EXPECT_EQ(0, ret); + EXPECT_EQ(1, mutex_args.count); + check_mutex_state(objs[1], 1, 456); + + ret = wait_for_thread(thread, 100); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, thread_args.ret); + EXPECT_EQ(1, wait_args.index); + + close(objs[1]); + + /* test waking events */ + + event_args.manual = false; + event_args.signaled = false; + objs[1] = ioctl(fd, NTSYNC_IOC_CREATE_EVENT, &event_args); + EXPECT_LE(0, objs[1]); + + wait_args.timeout = get_abs_timeout(1000); + ret = pthread_create(&thread, NULL, wait_thread, &thread_args); + EXPECT_EQ(0, ret); + + ret = wait_for_thread(thread, 100); + EXPECT_EQ(ETIMEDOUT, ret); + + ret = ioctl(objs[1], NTSYNC_IOC_EVENT_SET, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, signaled); + check_event_state(objs[1], 0, 0); + + ret = wait_for_thread(thread, 100); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, thread_args.ret); + EXPECT_EQ(1, wait_args.index); + + wait_args.timeout = get_abs_timeout(1000); + ret = pthread_create(&thread, NULL, wait_thread, &thread_args); + EXPECT_EQ(0, ret); + + ret = wait_for_thread(thread, 100); + EXPECT_EQ(ETIMEDOUT, ret); + + ret = ioctl(objs[1], NTSYNC_IOC_EVENT_PULSE, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, signaled); + check_event_state(objs[1], 0, 0); + + ret = wait_for_thread(thread, 100); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, thread_args.ret); + EXPECT_EQ(1, wait_args.index); + + close(objs[1]); + + event_args.manual = true; + event_args.signaled = false; + objs[1] = ioctl(fd, NTSYNC_IOC_CREATE_EVENT, &event_args); + EXPECT_LE(0, objs[1]); + + wait_args.timeout = get_abs_timeout(1000); + ret = pthread_create(&thread, NULL, wait_thread, &thread_args); + EXPECT_EQ(0, ret); + + ret = wait_for_thread(thread, 100); + EXPECT_EQ(ETIMEDOUT, ret); + + ret = ioctl(objs[1], NTSYNC_IOC_EVENT_SET, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, signaled); + check_event_state(objs[1], 1, 1); + + ret = wait_for_thread(thread, 100); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, thread_args.ret); + EXPECT_EQ(1, wait_args.index); + + ret = ioctl(objs[1], NTSYNC_IOC_EVENT_RESET, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(1, signaled); + + wait_args.timeout = get_abs_timeout(1000); + ret = pthread_create(&thread, NULL, wait_thread, &thread_args); + EXPECT_EQ(0, ret); + + ret = wait_for_thread(thread, 100); + EXPECT_EQ(ETIMEDOUT, ret); + + ret = ioctl(objs[1], NTSYNC_IOC_EVENT_PULSE, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, signaled); + check_event_state(objs[1], 0, 1); + + ret = wait_for_thread(thread, 100); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, thread_args.ret); + EXPECT_EQ(1, wait_args.index); + + /* delete an object while it's being waited on */ + + wait_args.timeout = get_abs_timeout(200); + wait_args.owner = 123; + ret = pthread_create(&thread, NULL, wait_thread, &thread_args); + EXPECT_EQ(0, ret); + + ret = wait_for_thread(thread, 100); + EXPECT_EQ(ETIMEDOUT, ret); + + close(objs[0]); + close(objs[1]); + + ret = wait_for_thread(thread, 200); + EXPECT_EQ(0, ret); + EXPECT_EQ(-1, thread_args.ret); + EXPECT_EQ(ETIMEDOUT, thread_args.err); + + close(fd); +} + +TEST(wake_all) +{ + struct ntsync_event_args manual_event_args = {0}; + struct ntsync_event_args auto_event_args = {0}; + struct ntsync_mutex_args mutex_args = {0}; + struct ntsync_wait_args wait_args = {0}; + struct ntsync_sem_args sem_args = {0}; + struct wait_args thread_args; + __u32 count, index, signaled; + int objs[4], fd, ret; + pthread_t thread; + + fd = open("/dev/ntsync", O_CLOEXEC | O_RDONLY); + ASSERT_LE(0, fd); + + sem_args.count = 0; + sem_args.max = 3; + objs[0] = ioctl(fd, NTSYNC_IOC_CREATE_SEM, &sem_args); + EXPECT_LE(0, objs[0]); + + mutex_args.owner = 123; + mutex_args.count = 1; + objs[1] = ioctl(fd, NTSYNC_IOC_CREATE_MUTEX, &mutex_args); + EXPECT_LE(0, objs[1]); + + manual_event_args.manual = true; + manual_event_args.signaled = true; + objs[2] = ioctl(fd, NTSYNC_IOC_CREATE_EVENT, &manual_event_args); + EXPECT_LE(0, objs[2]); + + auto_event_args.manual = false; + auto_event_args.signaled = true; + objs[3] = ioctl(fd, NTSYNC_IOC_CREATE_EVENT, &auto_event_args); + EXPECT_EQ(0, objs[3]); + + wait_args.timeout = get_abs_timeout(1000); + wait_args.objs = (uintptr_t)objs; + wait_args.count = 4; + wait_args.owner = 456; + thread_args.fd = fd; + thread_args.args = &wait_args; + thread_args.request = NTSYNC_IOC_WAIT_ALL; + ret = pthread_create(&thread, NULL, wait_thread, &thread_args); + EXPECT_EQ(0, ret); + + ret = wait_for_thread(thread, 100); + EXPECT_EQ(ETIMEDOUT, ret); + + count = 1; + ret = release_sem(objs[0], &count); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, count); + + ret = pthread_tryjoin_np(thread, NULL); + EXPECT_EQ(EBUSY, ret); + + check_sem_state(objs[0], 1, 3); + + ret = wait_any(fd, 1, &objs[0], 123, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, index); + + ret = unlock_mutex(objs[1], 123, &count); + EXPECT_EQ(0, ret); + EXPECT_EQ(1, count); + + ret = pthread_tryjoin_np(thread, NULL); + EXPECT_EQ(EBUSY, ret); + + check_mutex_state(objs[1], 0, 0); + + ret = ioctl(objs[2], NTSYNC_IOC_EVENT_RESET, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(1, signaled); + + count = 2; + ret = release_sem(objs[0], &count); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, count); + check_sem_state(objs[0], 2, 3); + + ret = ioctl(objs[3], NTSYNC_IOC_EVENT_RESET, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(1, signaled); + + ret = ioctl(objs[2], NTSYNC_IOC_EVENT_SET, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, signaled); + + ret = ioctl(objs[3], NTSYNC_IOC_EVENT_SET, &signaled); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, signaled); + + check_sem_state(objs[0], 1, 3); + check_mutex_state(objs[1], 1, 456); + check_event_state(objs[2], 1, 1); + check_event_state(objs[3], 0, 0); + + ret = wait_for_thread(thread, 100); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, thread_args.ret); + + /* delete an object while it's being waited on */ + + wait_args.timeout = get_abs_timeout(200); + wait_args.owner = 123; + ret = pthread_create(&thread, NULL, wait_thread, &thread_args); + EXPECT_EQ(0, ret); + + ret = wait_for_thread(thread, 100); + EXPECT_EQ(ETIMEDOUT, ret); + + close(objs[0]); + close(objs[1]); + close(objs[2]); + close(objs[3]); + + ret = wait_for_thread(thread, 200); + EXPECT_EQ(0, ret); + EXPECT_EQ(-1, thread_args.ret); + EXPECT_EQ(ETIMEDOUT, thread_args.err); + + close(fd); +} + +TEST(alert_any) +{ + struct ntsync_event_args event_args = {0}; + struct ntsync_wait_args wait_args = {0}; + struct ntsync_sem_args sem_args = {0}; + __u32 index, count, signaled; + struct wait_args thread_args; + int objs[2], event, fd, ret; + pthread_t thread; + + fd = open("/dev/ntsync", O_CLOEXEC | O_RDONLY); + ASSERT_LE(0, fd); + + sem_args.count = 0; + sem_args.max = 2; + objs[0] = ioctl(fd, NTSYNC_IOC_CREATE_SEM, &sem_args); + EXPECT_LE(0, objs[0]); + + sem_args.count = 1; + sem_args.max = 2; + objs[1] = ioctl(fd, NTSYNC_IOC_CREATE_SEM, &sem_args); + EXPECT_LE(0, objs[1]); + + event_args.manual = true; + event_args.signaled = true; + event = ioctl(fd, NTSYNC_IOC_CREATE_EVENT, &event_args); + EXPECT_LE(0, event); + + ret = wait_any_alert(fd, 0, NULL, 123, event, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, index); + + ret = ioctl(event, NTSYNC_IOC_EVENT_RESET, &signaled); + EXPECT_EQ(0, ret); + + ret = wait_any_alert(fd, 0, NULL, 123, event, &index); + EXPECT_EQ(-1, ret); + EXPECT_EQ(ETIMEDOUT, errno); + + ret = ioctl(event, NTSYNC_IOC_EVENT_SET, &signaled); + EXPECT_EQ(0, ret); + + ret = wait_any_alert(fd, 2, objs, 123, event, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(1, index); + + ret = wait_any_alert(fd, 2, objs, 123, event, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(2, index); + + /* test wakeup via alert */ + + ret = ioctl(event, NTSYNC_IOC_EVENT_RESET, &signaled); + EXPECT_EQ(0, ret); + + wait_args.timeout = get_abs_timeout(1000); + wait_args.objs = (uintptr_t)objs; + wait_args.count = 2; + wait_args.owner = 123; + wait_args.index = 0xdeadbeef; + wait_args.alert = event; + thread_args.fd = fd; + thread_args.args = &wait_args; + thread_args.request = NTSYNC_IOC_WAIT_ANY; + ret = pthread_create(&thread, NULL, wait_thread, &thread_args); + EXPECT_EQ(0, ret); + + ret = wait_for_thread(thread, 100); + EXPECT_EQ(ETIMEDOUT, ret); + + ret = ioctl(event, NTSYNC_IOC_EVENT_SET, &signaled); + EXPECT_EQ(0, ret); + + ret = wait_for_thread(thread, 100); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, thread_args.ret); + EXPECT_EQ(2, wait_args.index); + + close(event); + + /* test with an auto-reset event */ + + event_args.manual = false; + event_args.signaled = true; + event = ioctl(fd, NTSYNC_IOC_CREATE_EVENT, &event_args); + EXPECT_LE(0, event); + + count = 1; + ret = release_sem(objs[0], &count); + EXPECT_EQ(0, ret); + + ret = wait_any_alert(fd, 2, objs, 123, event, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, index); + + ret = wait_any_alert(fd, 2, objs, 123, event, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(2, index); + + ret = wait_any_alert(fd, 2, objs, 123, event, &index); + EXPECT_EQ(-1, ret); + EXPECT_EQ(ETIMEDOUT, errno); + + close(event); + + close(objs[0]); + close(objs[1]); + + close(fd); +} + +TEST(alert_all) +{ + struct ntsync_event_args event_args = {0}; + struct ntsync_wait_args wait_args = {0}; + struct ntsync_sem_args sem_args = {0}; + struct wait_args thread_args; + __u32 index, count, signaled; + int objs[2], event, fd, ret; + pthread_t thread; + + fd = open("/dev/ntsync", O_CLOEXEC | O_RDONLY); + ASSERT_LE(0, fd); + + sem_args.count = 2; + sem_args.max = 2; + objs[0] = ioctl(fd, NTSYNC_IOC_CREATE_SEM, &sem_args); + EXPECT_LE(0, objs[0]); + + sem_args.count = 1; + sem_args.max = 2; + objs[1] = ioctl(fd, NTSYNC_IOC_CREATE_SEM, &sem_args); + EXPECT_LE(0, objs[1]); + + event_args.manual = true; + event_args.signaled = true; + event = ioctl(fd, NTSYNC_IOC_CREATE_EVENT, &event_args); + EXPECT_LE(0, event); + + ret = wait_all_alert(fd, 2, objs, 123, event, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, index); + + ret = wait_all_alert(fd, 2, objs, 123, event, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(2, index); + + /* test wakeup via alert */ + + ret = ioctl(event, NTSYNC_IOC_EVENT_RESET, &signaled); + EXPECT_EQ(0, ret); + + wait_args.timeout = get_abs_timeout(1000); + wait_args.objs = (uintptr_t)objs; + wait_args.count = 2; + wait_args.owner = 123; + wait_args.index = 0xdeadbeef; + wait_args.alert = event; + thread_args.fd = fd; + thread_args.args = &wait_args; + thread_args.request = NTSYNC_IOC_WAIT_ALL; + ret = pthread_create(&thread, NULL, wait_thread, &thread_args); + EXPECT_EQ(0, ret); + + ret = wait_for_thread(thread, 100); + EXPECT_EQ(ETIMEDOUT, ret); + + ret = ioctl(event, NTSYNC_IOC_EVENT_SET, &signaled); + EXPECT_EQ(0, ret); + + ret = wait_for_thread(thread, 100); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, thread_args.ret); + EXPECT_EQ(2, wait_args.index); + + close(event); + + /* test with an auto-reset event */ + + event_args.manual = false; + event_args.signaled = true; + event = ioctl(fd, NTSYNC_IOC_CREATE_EVENT, &event_args); + EXPECT_LE(0, event); + + count = 2; + ret = release_sem(objs[1], &count); + EXPECT_EQ(0, ret); + + ret = wait_all_alert(fd, 2, objs, 123, event, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(0, index); + + ret = wait_all_alert(fd, 2, objs, 123, event, &index); + EXPECT_EQ(0, ret); + EXPECT_EQ(2, index); + + ret = wait_all_alert(fd, 2, objs, 123, event, &index); + EXPECT_EQ(-1, ret); + EXPECT_EQ(ETIMEDOUT, errno); + + close(event); + + close(objs[0]); + close(objs[1]); + + close(fd); +} + +#define STRESS_LOOPS 10000 +#define STRESS_THREADS 4 + +static unsigned int stress_counter; +static int stress_device, stress_start_event, stress_mutex; + +static void *stress_thread(void *arg) +{ + struct ntsync_wait_args wait_args = {0}; + __u32 index, count, i; + int ret; + + wait_args.timeout = UINT64_MAX; + wait_args.count = 1; + wait_args.objs = (uintptr_t)&stress_start_event; + wait_args.owner = gettid(); + wait_args.index = 0xdeadbeef; + + ioctl(stress_device, NTSYNC_IOC_WAIT_ANY, &wait_args); + + wait_args.objs = (uintptr_t)&stress_mutex; + + for (i = 0; i < STRESS_LOOPS; ++i) { + ioctl(stress_device, NTSYNC_IOC_WAIT_ANY, &wait_args); + + ++stress_counter; + + unlock_mutex(stress_mutex, wait_args.owner, &count); + } + + return NULL; +} + +TEST(stress_wait) +{ + struct ntsync_event_args event_args; + struct ntsync_mutex_args mutex_args; + pthread_t threads[STRESS_THREADS]; + __u32 signaled, i; + int ret; + + stress_device = open("/dev/ntsync", O_CLOEXEC | O_RDONLY); + ASSERT_LE(0, stress_device); + + mutex_args.owner = 0; + mutex_args.count = 0; + stress_mutex = ioctl(stress_device, NTSYNC_IOC_CREATE_MUTEX, &mutex_args); + EXPECT_LE(0, stress_mutex); + + event_args.manual = 1; + event_args.signaled = 0; + stress_start_event = ioctl(stress_device, NTSYNC_IOC_CREATE_EVENT, &event_args); + EXPECT_LE(0, stress_start_event); + + for (i = 0; i < STRESS_THREADS; ++i) + pthread_create(&threads[i], NULL, stress_thread, NULL); + + ret = ioctl(stress_start_event, NTSYNC_IOC_EVENT_SET, &signaled); + EXPECT_EQ(0, ret); + + for (i = 0; i < STRESS_THREADS; ++i) { + ret = pthread_join(threads[i], NULL); + EXPECT_EQ(0, ret); + } + + EXPECT_EQ(STRESS_LOOPS * STRESS_THREADS, stress_counter); + + close(stress_start_event); + close(stress_mutex); + close(stress_device); +} + +TEST_HARNESS_MAIN diff --git a/tools/testing/selftests/drivers/platform/x86/intel/ifs/Makefile b/tools/testing/selftests/drivers/platform/x86/intel/ifs/Makefile new file mode 100644 index 000000000000..03d0449d307c --- /dev/null +++ b/tools/testing/selftests/drivers/platform/x86/intel/ifs/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0 +# Makefile for ifs(In Field Scan) selftests + +TEST_PROGS := test_ifs.sh + +include ../../../../../lib.mk diff --git a/tools/testing/selftests/drivers/platform/x86/intel/ifs/test_ifs.sh b/tools/testing/selftests/drivers/platform/x86/intel/ifs/test_ifs.sh new file mode 100755 index 000000000000..8b68964b29f4 --- /dev/null +++ b/tools/testing/selftests/drivers/platform/x86/intel/ifs/test_ifs.sh @@ -0,0 +1,494 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test the functionality of the Intel IFS(In Field Scan) driver. +# + +# Matched with kselftest framework: tools/testing/selftests/kselftest.h +readonly KSFT_PASS=0 +readonly KSFT_FAIL=1 +readonly KSFT_XFAIL=2 +readonly KSFT_SKIP=4 + +readonly CPU_SYSFS="/sys/devices/system/cpu" +readonly CPU_OFFLINE_SYSFS="${CPU_SYSFS}/offline" +readonly IMG_PATH="/lib/firmware/intel/ifs_0" +readonly IFS_SCAN_MODE="0" +readonly IFS_ARRAY_BIST_SCAN_MODE="1" +readonly IFS_PATH="/sys/devices/virtual/misc/intel_ifs" +readonly IFS_SCAN_SYSFS_PATH="${IFS_PATH}_${IFS_SCAN_MODE}" +readonly IFS_ARRAY_BIST_SYSFS_PATH="${IFS_PATH}_${IFS_ARRAY_BIST_SCAN_MODE}" +readonly RUN_TEST="run_test" +readonly STATUS="status" +readonly DETAILS="details" +readonly STATUS_PASS="pass" +readonly PASS="PASS" +readonly FAIL="FAIL" +readonly INFO="INFO" +readonly XFAIL="XFAIL" +readonly SKIP="SKIP" +readonly IFS_NAME="intel_ifs" +readonly ALL="all" +readonly SIBLINGS="siblings" + +# Matches arch/x86/include/asm/intel-family.h and +# drivers/platform/x86/intel/ifs/core.c requirement as follows +readonly SAPPHIRERAPIDS_X="8f" +readonly EMERALDRAPIDS_X="cf" + +readonly INTEL_FAM6="06" + +LOOP_TIMES=3 +FML="" +MODEL="" +STEPPING="" +CPU_FMS="" +TRUE="true" +FALSE="false" +RESULT=$KSFT_PASS +IMAGE_NAME="" +INTERVAL_TIME=1 +OFFLINE_CPUS="" +# For IFS cleanup tags +ORIGIN_IFS_LOADED="" +IFS_IMAGE_NEED_RESTORE=$FALSE +IFS_LOG="/tmp/ifs_logs.$$" +RANDOM_CPU="" +DEFAULT_IMG_ID="" + +append_log() +{ + echo -e "$1" | tee -a "$IFS_LOG" +} + +online_offline_cpu_list() +{ + local on_off=$1 + local target_cpus=$2 + local cpu="" + local cpu_start="" + local cpu_end="" + local i="" + + if [[ -n "$target_cpus" ]]; then + for cpu in $(echo "$target_cpus" | tr ',' ' '); do + if [[ "$cpu" == *"-"* ]]; then + cpu_start="" + cpu_end="" + i="" + cpu_start=$(echo "$cpu" | cut -d "-" -f 1) + cpu_end=$(echo "$cpu" | cut -d "-" -f 2) + for((i=cpu_start;i<=cpu_end;i++)); do + append_log "[$INFO] echo $on_off > \ +${CPU_SYSFS}/cpu${i}/online" + echo "$on_off" > "$CPU_SYSFS"/cpu"$i"/online + done + else + set_target_cpu "$on_off" "$cpu" + fi + done + fi +} + +ifs_scan_result_summary() +{ + local failed_info pass_num skip_num fail_num + + if [[ -e "$IFS_LOG" ]]; then + failed_info=$(grep ^"\[${FAIL}\]" "$IFS_LOG") + fail_num=$(grep -c ^"\[${FAIL}\]" "$IFS_LOG") + skip_num=$(grep -c ^"\[${SKIP}\]" "$IFS_LOG") + pass_num=$(grep -c ^"\[${PASS}\]" "$IFS_LOG") + + if [[ "$fail_num" -ne 0 ]]; then + RESULT=$KSFT_FAIL + echo "[$INFO] IFS test failure summary:" + echo "$failed_info" + elif [[ "$skip_num" -ne 0 ]]; then + RESULT=$KSFT_SKIP + fi + echo "[$INFO] IFS test pass:$pass_num, skip:$skip_num, fail:$fail_num" + else + echo "[$INFO] No file $IFS_LOG for IFS scan summary" + fi +} + +ifs_cleanup() +{ + echo "[$INFO] Restore environment after IFS test" + + # Restore ifs origin image if origin image backup step is needed + [[ "$IFS_IMAGE_NEED_RESTORE" == "$TRUE" ]] && { + mv -f "$IMG_PATH"/"$IMAGE_NAME"_origin "$IMG_PATH"/"$IMAGE_NAME" + } + + # Restore the CPUs to the state before testing + [[ -z "$OFFLINE_CPUS" ]] || online_offline_cpu_list "0" "$OFFLINE_CPUS" + + lsmod | grep -q "$IFS_NAME" && [[ "$ORIGIN_IFS_LOADED" == "$FALSE" ]] && { + echo "[$INFO] modprobe -r $IFS_NAME" + modprobe -r "$IFS_NAME" + } + + ifs_scan_result_summary + [[ -e "$IFS_LOG" ]] && rm -rf "$IFS_LOG" + + echo "[RESULT] IFS test exit with $RESULT" + exit "$RESULT" +} + +do_cmd() +{ + local cmd=$* + local ret="" + + append_log "[$INFO] $cmd" + eval "$cmd" + ret=$? + if [[ $ret -ne 0 ]]; then + append_log "[$FAIL] $cmd failed. Return code is $ret" + RESULT=$KSFT_XFAIL + ifs_cleanup + fi +} + +test_exit() +{ + local info=$1 + RESULT=$2 + + declare -A EXIT_MAP + EXIT_MAP[$KSFT_PASS]=$PASS + EXIT_MAP[$KSFT_FAIL]=$FAIL + EXIT_MAP[$KSFT_XFAIL]=$XFAIL + EXIT_MAP[$KSFT_SKIP]=$SKIP + + append_log "[${EXIT_MAP[$RESULT]}] $info" + ifs_cleanup +} + +online_all_cpus() +{ + local off_cpus="" + + OFFLINE_CPUS=$(cat "$CPU_OFFLINE_SYSFS") + online_offline_cpu_list "1" "$OFFLINE_CPUS" + + off_cpus=$(cat "$CPU_OFFLINE_SYSFS") + if [[ -z "$off_cpus" ]]; then + append_log "[$INFO] All CPUs are online." + else + append_log "[$XFAIL] There is offline cpu:$off_cpus after online all cpu!" + RESULT=$KSFT_XFAIL + ifs_cleanup + fi +} + +get_cpu_fms() +{ + FML=$(grep -m 1 "family" /proc/cpuinfo | awk -F ":" '{printf "%02x",$2;}') + MODEL=$(grep -m 1 "model" /proc/cpuinfo | awk -F ":" '{printf "%02x",$2;}') + STEPPING=$(grep -m 1 "stepping" /proc/cpuinfo | awk -F ":" '{printf "%02x",$2;}') + CPU_FMS="${FML}-${MODEL}-${STEPPING}" +} + +check_cpu_ifs_support_interval_time() +{ + get_cpu_fms + + if [[ "$FML" != "$INTEL_FAM6" ]]; then + test_exit "CPU family:$FML does not support IFS" "$KSFT_SKIP" + fi + + # Ucode has time interval requirement for IFS scan on same CPU as follows: + case $MODEL in + "$SAPPHIRERAPIDS_X") + INTERVAL_TIME=180; + ;; + "$EMERALDRAPIDS_X") + INTERVAL_TIME=30; + ;; + *) + # Set default interval time for other platforms + INTERVAL_TIME=1; + append_log "[$INFO] CPU FML:$FML model:0x$MODEL, default: 1s interval time" + ;; + esac +} + +check_ifs_loaded() +{ + local ifs_info="" + + ifs_info=$(lsmod | grep "$IFS_NAME") + if [[ -z "$ifs_info" ]]; then + append_log "[$INFO] modprobe $IFS_NAME" + modprobe "$IFS_NAME" || { + test_exit "Check if CONFIG_INTEL_IFS is set to m or \ +platform doesn't support ifs" "$KSFT_SKIP" + } + ifs_info=$(lsmod | grep "$IFS_NAME") + [[ -n "$ifs_info" ]] || test_exit "No ifs module listed by lsmod" "$KSFT_FAIL" + fi +} + +test_ifs_scan_entry() +{ + local ifs_info="" + + ifs_info=$(lsmod | grep "$IFS_NAME") + + if [[ -z "$ifs_info" ]]; then + ORIGIN_IFS_LOADED="$FALSE" + check_ifs_loaded + else + ORIGIN_IFS_LOADED="$TRUE" + append_log "[$INFO] Module $IFS_NAME is already loaded" + fi + + if [[ -d "$IFS_SCAN_SYSFS_PATH" ]]; then + append_log "[$PASS] IFS sysfs $IFS_SCAN_SYSFS_PATH entry is created\n" + else + test_exit "No sysfs entry in $IFS_SCAN_SYSFS_PATH" "$KSFT_FAIL" + fi +} + +load_image() +{ + local image_id=$1 + local image_info="" + local ret="" + + check_ifs_loaded + if [[ -e "${IMG_PATH}/${IMAGE_NAME}" ]]; then + append_log "[$INFO] echo 0x$image_id > ${IFS_SCAN_SYSFS_PATH}/current_batch" + echo "0x$image_id" > "$IFS_SCAN_SYSFS_PATH"/current_batch 2>/dev/null + ret=$? + [[ "$ret" -eq 0 ]] || { + append_log "[$FAIL] Load ifs image $image_id failed with ret:$ret\n" + return "$ret" + } + image_info=$(cat ${IFS_SCAN_SYSFS_PATH}/current_batch) + if [[ "$image_info" == 0x"$image_id" ]]; then + append_log "[$PASS] load IFS current_batch:$image_info" + else + append_log "[$FAIL] current_batch:$image_info is not expected:$image_id" + return "$KSFT_FAIL" + fi + else + append_log "[$FAIL] No IFS image file ${IMG_PATH}/${IMAGE_NAME}"\ + return "$KSFT_FAIL" + fi + return 0 +} + +test_load_origin_ifs_image() +{ + local image_id=$1 + + IMAGE_NAME="${CPU_FMS}-${image_id}.scan" + + load_image "$image_id" || return $? + return 0 +} + +test_load_bad_ifs_image() +{ + local image_id=$1 + + IMAGE_NAME="${CPU_FMS}-${image_id}.scan" + + do_cmd "mv -f ${IMG_PATH}/${IMAGE_NAME} ${IMG_PATH}/${IMAGE_NAME}_origin" + + # Set IFS_IMAGE_NEED_RESTORE to true before corrupt the origin ifs image file + IFS_IMAGE_NEED_RESTORE=$TRUE + do_cmd "dd if=/dev/urandom of=${IMG_PATH}/${IMAGE_NAME} bs=1K count=6 2>/dev/null" + + # Use the specified judgment for negative testing + append_log "[$INFO] echo 0x$image_id > ${IFS_SCAN_SYSFS_PATH}/current_batch" + echo "0x$image_id" > "$IFS_SCAN_SYSFS_PATH"/current_batch 2>/dev/null + ret=$? + if [[ "$ret" -ne 0 ]]; then + append_log "[$PASS] Load invalid ifs image failed with ret:$ret not 0 as expected" + else + append_log "[$FAIL] Load invalid ifs image ret:$ret unexpectedly" + fi + + do_cmd "mv -f ${IMG_PATH}/${IMAGE_NAME}_origin ${IMG_PATH}/${IMAGE_NAME}" + IFS_IMAGE_NEED_RESTORE=$FALSE +} + +test_bad_and_origin_ifs_image() +{ + local image_id=$1 + + append_log "[$INFO] Test loading bad and then loading original IFS image:" + test_load_origin_ifs_image "$image_id" || return $? + test_load_bad_ifs_image "$image_id" + # Load origin image again and make sure it's worked + test_load_origin_ifs_image "$image_id" || return $? + append_log "[$INFO] Loading invalid IFS image and then loading initial image passed.\n" +} + +ifs_test_cpu() +{ + local ifs_mode=$1 + local cpu_num=$2 + local image_id status details ret result result_info + + echo "$cpu_num" > "$IFS_PATH"_"$ifs_mode"/"$RUN_TEST" + ret=$? + + status=$(cat "${IFS_PATH}_${ifs_mode}/${STATUS}") + details=$(cat "${IFS_PATH}_${ifs_mode}/${DETAILS}") + + if [[ "$ret" -eq 0 && "$status" == "$STATUS_PASS" ]]; then + result="$PASS" + else + result="$FAIL" + fi + + cpu_num=$(cat "${CPU_SYSFS}/cpu${cpu_num}/topology/thread_siblings_list") + + # There is no image file for IFS ARRAY BIST scan + if [[ -e "${IFS_PATH}_${ifs_mode}/current_batch" ]]; then + image_id=$(cat "${IFS_PATH}_${ifs_mode}/current_batch") + result_info=$(printf "[%s] ifs_%1d cpu(s):%s, current_batch:0x%02x, \ +ret:%2d, status:%s, details:0x%016x" \ + "$result" "$ifs_mode" "$cpu_num" "$image_id" "$ret" \ + "$status" "$details") + else + result_info=$(printf "[%s] ifs_%1d cpu(s):%s, ret:%2d, status:%s, details:0x%016x" \ + "$result" "$ifs_mode" "$cpu_num" "$ret" "$status" "$details") + fi + + append_log "$result_info" +} + +ifs_test_cpus() +{ + local cpus_type=$1 + local ifs_mode=$2 + local image_id=$3 + local cpu_max_num="" + local cpu_num="" + + case "$cpus_type" in + "$ALL") + cpu_max_num=$(($(nproc) - 1)) + cpus=$(seq 0 $cpu_max_num) + ;; + "$SIBLINGS") + cpus=$(cat ${CPU_SYSFS}/cpu*/topology/thread_siblings_list \ + | sed -e 's/,.*//' \ + | sed -e 's/-.*//' \ + | sort -n \ + | uniq) + ;; + *) + test_exit "Invalid cpus_type:$cpus_type" "$KSFT_XFAIL" + ;; + esac + + for cpu_num in $cpus; do + ifs_test_cpu "$ifs_mode" "$cpu_num" + done + + if [[ -z "$image_id" ]]; then + append_log "[$INFO] ifs_$ifs_mode test $cpus_type cpus completed\n" + else + append_log "[$INFO] ifs_$ifs_mode $cpus_type cpus with $CPU_FMS-$image_id.scan \ +completed\n" + fi +} + +test_ifs_same_cpu_loop() +{ + local ifs_mode=$1 + local cpu_num=$2 + local loop_times=$3 + + append_log "[$INFO] Test ifs mode $ifs_mode on CPU:$cpu_num for $loop_times rounds:" + [[ "$ifs_mode" == "$IFS_SCAN_MODE" ]] && { + load_image "$DEFAULT_IMG_ID" || return $? + } + for (( i=1; i<=loop_times; i++ )); do + append_log "[$INFO] Loop iteration: $i in total of $loop_times" + # Only IFS scan needs the interval time + if [[ "$ifs_mode" == "$IFS_SCAN_MODE" ]]; then + do_cmd "sleep $INTERVAL_TIME" + elif [[ "$ifs_mode" == "$IFS_ARRAY_BIST_SCAN_MODE" ]]; then + true + else + test_exit "Invalid ifs_mode:$ifs_mode" "$KSFT_XFAIL" + fi + + ifs_test_cpu "$ifs_mode" "$cpu_num" + done + append_log "[$INFO] $loop_times rounds of ifs_$ifs_mode test on CPU:$cpu_num completed.\n" +} + +test_ifs_scan_available_imgs() +{ + local image_ids="" + local image_id="" + + append_log "[$INFO] Test ifs scan with available images:" + image_ids=$(find "$IMG_PATH" -maxdepth 1 -name "${CPU_FMS}-[0-9a-fA-F][0-9a-fA-F].scan" \ + 2>/dev/null \ + | sort \ + | awk -F "-" '{print $NF}' \ + | cut -d "." -f 1) + + for image_id in $image_ids; do + load_image "$image_id" || return $? + + ifs_test_cpus "$SIBLINGS" "$IFS_SCAN_MODE" "$image_id" + # IFS scan requires time interval for the scan on the same CPU + do_cmd "sleep $INTERVAL_TIME" + done +} + +prepare_ifs_test_env() +{ + local max_cpu="" + + check_cpu_ifs_support_interval_time + + online_all_cpus + max_cpu=$(($(nproc) - 1)) + RANDOM_CPU=$(shuf -i 0-$max_cpu -n 1) + + DEFAULT_IMG_ID=$(find $IMG_PATH -maxdepth 1 -name "${CPU_FMS}-[0-9a-fA-F][0-9a-fA-F].scan" \ + 2>/dev/null \ + | sort \ + | head -n 1 \ + | awk -F "-" '{print $NF}' \ + | cut -d "." -f 1) +} + +test_ifs() +{ + prepare_ifs_test_env + + test_ifs_scan_entry + + if [[ -z "$DEFAULT_IMG_ID" ]]; then + append_log "[$SKIP] No proper ${IMG_PATH}/${CPU_FMS}-*.scan, skip ifs_0 scan" + else + test_bad_and_origin_ifs_image "$DEFAULT_IMG_ID" + test_ifs_scan_available_imgs + test_ifs_same_cpu_loop "$IFS_SCAN_MODE" "$RANDOM_CPU" "$LOOP_TIMES" + fi + + if [[ -d "$IFS_ARRAY_BIST_SYSFS_PATH" ]]; then + ifs_test_cpus "$SIBLINGS" "$IFS_ARRAY_BIST_SCAN_MODE" + test_ifs_same_cpu_loop "$IFS_ARRAY_BIST_SCAN_MODE" "$RANDOM_CPU" "$LOOP_TIMES" + else + append_log "[$SKIP] No $IFS_ARRAY_BIST_SYSFS_PATH, skip IFS ARRAY BIST scan" + fi +} + +trap ifs_cleanup SIGTERM SIGINT +test_ifs +ifs_cleanup diff --git a/tools/testing/selftests/drivers/s390x/uvdevice/test_uvdevice.c b/tools/testing/selftests/drivers/s390x/uvdevice/test_uvdevice.c index ea0cdc37b44f..7ee7492138c6 100644 --- a/tools/testing/selftests/drivers/s390x/uvdevice/test_uvdevice.c +++ b/tools/testing/selftests/drivers/s390x/uvdevice/test_uvdevice.c @@ -257,12 +257,6 @@ TEST_F(attest_fixture, att_inval_addr) att_inval_addr_test(&self->uvio_attest.meas_addr, _metadata, self); } -static void __attribute__((constructor)) __constructor_order_last(void) -{ - if (!__constructor_order) - __constructor_order = _CONSTRUCTOR_ORDER_BACKWARD; -} - int main(int argc, char **argv) { int fd = open(UV_PATH, O_ACCMODE); |