diff options
Diffstat (limited to 'tools/testing/selftests/net/forwarding/lib.sh')
| -rw-r--r-- | tools/testing/selftests/net/forwarding/lib.sh | 372 |
1 files changed, 147 insertions, 225 deletions
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index ff96bb7535ff..a9034f0bb58b 100644 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -37,6 +37,7 @@ declare -A NETIFS=( : "${TEAMD:=teamd}" : "${MCD:=smcrouted}" : "${MC_CLI:=smcroutectl}" +: "${MCD_TABLE_NAME:=selftests}" # Constants for netdevice bring-up: # Default time in seconds to wait for an interface to come up before giving up @@ -48,7 +49,6 @@ declare -A NETIFS=( : "${WAIT_TIME:=5}" # Whether to pause on, respectively, after a failure and before cleanup. -: "${PAUSE_ON_FAIL:=no}" : "${PAUSE_ON_CLEANUP:=no}" # Whether to create virtual interfaces, and what netdevice type they should be. @@ -69,6 +69,7 @@ declare -A NETIFS=( : "${REQUIRE_JQ:=yes}" : "${REQUIRE_MZ:=yes}" : "${REQUIRE_MTOOLS:=no}" +: "${REQUIRE_TEAMD:=no}" # Whether to override MAC addresses on interfaces participating in the test. : "${STABLE_MAC_ADDRS:=no}" @@ -141,6 +142,20 @@ check_tc_version() fi } +check_tc_erspan_support() +{ + local dev=$1; shift + + tc filter add dev $dev ingress pref 1 handle 1 flower \ + erspan_opts 1:0:0:0 &> /dev/null + if [[ $? -ne 0 ]]; then + echo "SKIP: iproute2 too old; tc is missing erspan support" + return $ksft_skip + fi + tc filter del dev $dev ingress pref 1 handle 1 flower \ + erspan_opts 1:0:0:0 &> /dev/null +} + # Old versions of tc don't understand "mpls_uc" check_tc_mpls_support() { @@ -291,16 +306,6 @@ if [[ "$CHECK_TC" = "yes" ]]; then check_tc_version fi -require_command() -{ - local cmd=$1; shift - - if [[ ! -x "$(command -v "$cmd")" ]]; then - echo "SKIP: $cmd not installed" - exit $ksft_skip - fi -} - # IPv6 support was added in v3.0 check_mtools_version() { @@ -322,6 +327,9 @@ fi if [[ "$REQUIRE_MZ" = "yes" ]]; then require_command $MZ fi +if [[ "$REQUIRE_TEAMD" = "yes" ]]; then + require_command $TEAMD +fi if [[ "$REQUIRE_MTOOLS" = "yes" ]]; then # https://github.com/troglobit/mtools require_command msend @@ -446,179 +454,6 @@ done ############################################################################## # Helpers -# Exit status to return at the end. Set in case one of the tests fails. -EXIT_STATUS=0 -# Per-test return value. Clear at the beginning of each test. -RET=0 - -ret_set_ksft_status() -{ - local ksft_status=$1; shift - local msg=$1; shift - - RET=$(ksft_status_merge $RET $ksft_status) - if (( $? )); then - retmsg=$msg - fi -} - -# Whether FAILs should be interpreted as XFAILs. Internal. -FAIL_TO_XFAIL= - -check_err() -{ - local err=$1 - local msg=$2 - - if ((err)); then - if [[ $FAIL_TO_XFAIL = yes ]]; then - ret_set_ksft_status $ksft_xfail "$msg" - else - ret_set_ksft_status $ksft_fail "$msg" - fi - fi -} - -check_fail() -{ - local err=$1 - local msg=$2 - - check_err $((!err)) "$msg" -} - -check_err_fail() -{ - local should_fail=$1; shift - local err=$1; shift - local what=$1; shift - - if ((should_fail)); then - check_fail $err "$what succeeded, but should have failed" - else - check_err $err "$what failed" - fi -} - -xfail_on_slow() -{ - if [[ $KSFT_MACHINE_SLOW = yes ]]; then - FAIL_TO_XFAIL=yes "$@" - else - "$@" - fi -} - -xfail_on_veth() -{ - local dev=$1; shift - local kind - - kind=$(ip -j -d link show dev $dev | - jq -r '.[].linkinfo.info_kind') - if [[ $kind = veth ]]; then - FAIL_TO_XFAIL=yes "$@" - else - "$@" - fi -} - -log_test_result() -{ - local test_name=$1; shift - local opt_str=$1; shift - local result=$1; shift - local retmsg=$1; shift - - printf "TEST: %-60s [%s]\n" "$test_name $opt_str" "$result" - if [[ $retmsg ]]; then - printf "\t%s\n" "$retmsg" - fi -} - -pause_on_fail() -{ - if [[ $PAUSE_ON_FAIL == yes ]]; then - echo "Hit enter to continue, 'q' to quit" - read a - [[ $a == q ]] && exit 1 - fi -} - -handle_test_result_pass() -{ - local test_name=$1; shift - local opt_str=$1; shift - - log_test_result "$test_name" "$opt_str" " OK " -} - -handle_test_result_fail() -{ - local test_name=$1; shift - local opt_str=$1; shift - - log_test_result "$test_name" "$opt_str" FAIL "$retmsg" - pause_on_fail -} - -handle_test_result_xfail() -{ - local test_name=$1; shift - local opt_str=$1; shift - - log_test_result "$test_name" "$opt_str" XFAIL "$retmsg" - pause_on_fail -} - -handle_test_result_skip() -{ - local test_name=$1; shift - local opt_str=$1; shift - - log_test_result "$test_name" "$opt_str" SKIP "$retmsg" -} - -log_test() -{ - local test_name=$1 - local opt_str=$2 - - if [[ $# -eq 2 ]]; then - opt_str="($opt_str)" - fi - - if ((RET == ksft_pass)); then - handle_test_result_pass "$test_name" "$opt_str" - elif ((RET == ksft_xfail)); then - handle_test_result_xfail "$test_name" "$opt_str" - elif ((RET == ksft_skip)); then - handle_test_result_skip "$test_name" "$opt_str" - else - handle_test_result_fail "$test_name" "$opt_str" - fi - - EXIT_STATUS=$(ksft_exit_status_merge $EXIT_STATUS $RET) - return $RET -} - -log_test_skip() -{ - RET=$ksft_skip retmsg= log_test "$@" -} - -log_test_xfail() -{ - RET=$ksft_xfail retmsg= log_test "$@" -} - -log_info() -{ - local msg=$1 - - echo "INFO: $msg" -} - not() { "$@" @@ -705,9 +540,9 @@ setup_wait_dev_with_timeout() return 1 } -setup_wait() +setup_wait_n() { - local num_netifs=${1:-$NUM_NETIFS} + local num_netifs=$1; shift local i for ((i = 1; i <= num_netifs; ++i)); do @@ -718,6 +553,11 @@ setup_wait() sleep $WAIT_TIME } +setup_wait() +{ + setup_wait_n "$NUM_NETIFS" +} + wait_for_dev() { local dev=$1; shift @@ -731,30 +571,6 @@ wait_for_dev() fi } -cmd_jq() -{ - local cmd=$1 - local jq_exp=$2 - local jq_opts=$3 - local ret - local output - - output="$($cmd)" - # it the command fails, return error right away - ret=$? - if [[ $ret -ne 0 ]]; then - return $ret - fi - output=$(echo $output | jq -r $jq_opts "$jq_exp") - ret=$? - if [[ $ret -ne 0 ]]; then - return $ret - fi - echo $output - # return success only in case of non-empty output - [ ! -z "$output" ] -} - pre_cleanup() { if [ "${PAUSE_ON_CLEANUP}" = "yes" ]; then @@ -783,6 +599,12 @@ vrf_cleanup() ip -4 rule del pref 32765 } +adf_vrf_prepare() +{ + vrf_prepare + defer vrf_cleanup +} + __last_tb_id=0 declare -A __TB_IDS @@ -895,6 +717,12 @@ simple_if_fini() vrf_destroy $vrf_name } +adf_simple_if_init() +{ + simple_if_init "$@" + defer simple_if_fini "$@" +} + tunnel_create() { local name=$1; shift @@ -1106,11 +934,37 @@ packets_rate() echo $(((t1 - t0) / interval)) } -mac_get() +ether_addr_to_u64() { - local if_name=$1 + local addr="$1" + local order="$((1 << 40))" + local val=0 + local byte + + addr="${addr//:/ }" + + for byte in $addr; do + byte="0x$byte" + val=$((val + order * byte)) + order=$((order >> 8)) + done - ip -j link show dev $if_name | jq -r '.[]["address"]' + printf "0x%x" $val +} + +u64_to_ether_addr() +{ + local val=$1 + local byte + local i + + for ((i = 40; i >= 0; i -= 8)); do + byte=$(((val & (0xff << i)) >> i)) + printf "%02x" $byte + if [ $i -ne 0 ]; then + printf ":" + fi + done } ipv6_lladdr_get() @@ -1169,6 +1023,12 @@ forwarding_restore() sysctl_restore net.ipv4.conf.all.forwarding } +adf_forwarding_enable() +{ + forwarding_enable + defer forwarding_restore +} + declare -A MTU_ORIG mtu_set() { @@ -1353,13 +1213,10 @@ matchall_sink_create() action drop } -tests_run() +cleanup() { - local current_test - - for current_test in ${TESTS:-$ALL_TESTS}; do - $current_test - done + pre_cleanup + defer_scopes_cleanup } multipath_eval() @@ -1428,8 +1285,8 @@ ping_do() vrf_name=$(master_name_get $if_name) ip vrf exec $vrf_name \ - $PING $args $dip -c $PING_COUNT -i 0.1 \ - -w $PING_TIMEOUT &> /dev/null + $PING $args -c $PING_COUNT -i 0.1 \ + -w $PING_TIMEOUT $dip &> /dev/null } ping_test() @@ -1459,8 +1316,8 @@ ping6_do() vrf_name=$(master_name_get $if_name) ip vrf exec $vrf_name \ - $PING6 $args $dip -c $PING_COUNT -i 0.1 \ - -w $PING_TIMEOUT &> /dev/null + $PING6 $args -c $PING_COUNT -i 0.1 \ + -w $PING_TIMEOUT $dip &> /dev/null } ping6_test() @@ -1716,8 +1573,9 @@ start_tcp_traffic() stop_traffic() { - # Suppress noise from killing mausezahn. - { kill %% && wait %%; } 2>/dev/null + local pid=${1-%%}; shift + + kill_process "$pid" } declare -A cappid @@ -1913,6 +1771,51 @@ mc_send() msend -g $groups -I $if_name -c 1 > /dev/null 2>&1 } +adf_mcd_start() +{ + local ifs=("$@") + + local table_name="$MCD_TABLE_NAME" + local smcroutedir + local pid + local if + local i + + check_command "$MCD" || return 1 + check_command "$MC_CLI" || return 1 + + smcroutedir=$(mktemp -d) + defer rm -rf "$smcroutedir" + + for ((i = 1; i <= NUM_NETIFS; ++i)); do + echo "phyint ${NETIFS[p$i]} enable" >> \ + "$smcroutedir/$table_name.conf" + done + + for if in "${ifs[@]}"; do + if ! ip_link_has_flag "$if" MULTICAST; then + ip link set dev "$if" multicast on + defer ip link set dev "$if" multicast off + fi + + echo "phyint $if enable" >> \ + "$smcroutedir/$table_name.conf" + done + + "$MCD" -N -I "$table_name" -f "$smcroutedir/$table_name.conf" \ + -P "$smcroutedir/$table_name.pid" + busywait "$BUSYWAIT_TIMEOUT" test -e "$smcroutedir/$table_name.pid" + pid=$(cat "$smcroutedir/$table_name.pid") + defer kill_process "$pid" +} + +mc_cli() +{ + local table_name="$MCD_TABLE_NAME" + + "$MC_CLI" -I "$table_name" "$@" +} + start_ip_monitor() { local mtype=$1; shift @@ -2229,3 +2132,22 @@ absval() echo $((v > 0 ? v : -v)) } + +has_unicast_flt() +{ + local dev=$1; shift + local mac_addr=$(mac_get $dev) + local tmp=$(ether_addr_to_u64 $mac_addr) + local promisc + + ip link set $dev up + ip link add link $dev name macvlan-tmp type macvlan mode private + ip link set macvlan-tmp address $(u64_to_ether_addr $((tmp + 1))) + ip link set macvlan-tmp up + + promisc=$(ip -j -d link show dev $dev | jq -r '.[].promiscuity') + + ip link del macvlan-tmp + + [[ $promisc == 1 ]] && echo "no" || echo "yes" +} |