diff options
Diffstat (limited to 'tools/testing/selftests/net/mptcp/simult_flows.sh')
| -rwxr-xr-x | tools/testing/selftests/net/mptcp/simult_flows.sh | 156 |
1 files changed, 77 insertions, 79 deletions
diff --git a/tools/testing/selftests/net/mptcp/simult_flows.sh b/tools/testing/selftests/net/mptcp/simult_flows.sh index ce9203b817f8..806aaa7d2d61 100755 --- a/tools/testing/selftests/net/mptcp/simult_flows.sh +++ b/tools/testing/selftests/net/mptcp/simult_flows.sh @@ -1,48 +1,52 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 +# Double quotes to prevent globbing and word splitting is recommended in new +# code but we accept it, especially because there were too many before having +# address all other issues detected by shellcheck. +#shellcheck disable=SC2086 + . "$(dirname "${0}")/mptcp_lib.sh" -sec=$(date +%s) -rndh=$(printf %x $sec)-$(mktemp -u XXXXXX) -ns1="ns1-$rndh" -ns2="ns2-$rndh" -ns3="ns3-$rndh" +ns1="" +ns2="" +ns3="" capture=false -ksft_skip=4 timeout_poll=30 timeout_test=$((timeout_poll * 2 + 1)) -test_cnt=1 +# a bit more space: because we have more to display +MPTCP_LIB_TEST_FORMAT="%02u %-60s" ret=0 bail=0 slack=50 +large="" +small="" +sout="" +cout="" +capout="" +size=0 usage() { - echo "Usage: $0 [ -b ] [ -c ] [ -d ]" - echo -e "\t-b: bail out after first error, otherwise runs al testcases" + echo "Usage: $0 [ -b ] [ -c ] [ -d ] [ -i]" + echo -e "\t-b: bail out after first error, otherwise runs all testcases" echo -e "\t-c: capture packets for each test using tcpdump (default: no capture)" echo -e "\t-d: debug this script" + echo -e "\t-i: use 'ip mptcp' instead of 'pm_nl_ctl'" } +# This function is used in the cleanup trap +#shellcheck disable=SC2317,SC2329 cleanup() { rm -f "$cout" "$sout" rm -f "$large" "$small" rm -f "$capout" - local netns - for netns in "$ns1" "$ns2" "$ns3";do - ip netns del $netns - done + mptcp_lib_ns_exit "${ns1}" "${ns2}" "${ns3}" } mptcp_lib_check_mptcp - -ip -Version > /dev/null 2>&1 -if [ $? -ne 0 ];then - echo "SKIP: Could not run test without ip tool" - exit $ksft_skip -fi +mptcp_lib_check_tools ip tc # "$ns1" ns2 ns3 # ns1eth1 ns2eth1 ns2eth3 ns3eth1 @@ -64,12 +68,7 @@ setup() trap cleanup EXIT - for i in "$ns1" "$ns2" "$ns3";do - ip netns add $i || exit $ksft_skip - ip -net $i link set lo up - ip netns exec $i sysctl -q net.ipv4.conf.all.rp_filter=0 - ip netns exec $i sysctl -q net.ipv4.conf.default.rp_filter=0 - done + mptcp_lib_ns_init ns1 ns2 ns3 ip link add ns1eth1 netns "$ns1" type veth peer name ns2eth1 netns "$ns2" ip link add ns1eth2 netns "$ns1" type veth peer name ns2eth2 netns "$ns2" @@ -87,8 +86,8 @@ setup() ip -net "$ns1" route add default via 10.0.2.2 metric 101 ip -net "$ns1" route add default via dead:beef:2::2 metric 101 - ip netns exec "$ns1" ./pm_nl_ctl limits 1 1 - ip netns exec "$ns1" ./pm_nl_ctl add 10.0.2.1 dev ns1eth2 flags subflow + mptcp_lib_pm_nl_set_limits "${ns1}" 1 1 + mptcp_lib_pm_nl_add_endpoint "${ns1}" 10.0.2.1 dev ns1eth2 flags subflow ip -net "$ns2" addr add 10.0.1.2/24 dev ns2eth1 ip -net "$ns2" addr add dead:beef:1::2/64 dev ns2eth1 nodad @@ -110,7 +109,7 @@ setup() ip -net "$ns3" route add default via 10.0.3.2 ip -net "$ns3" route add default via dead:beef:3::2 - ip netns exec "$ns3" ./pm_nl_ctl limits 1 1 + mptcp_lib_pm_nl_set_limits "${ns3}" 1 1 # debug build can slow down measurably the test program # we use quite tight time limit on the run-time, to ensure @@ -123,31 +122,13 @@ setup() grep -q ' kmemleak_init$\| lockdep_init$\| kasan_init$\| prove_locking$' /proc/kallsyms && slack=$((slack+550)) } -# $1: ns, $2: port -wait_local_port_listen() -{ - local listener_ns="${1}" - local port="${2}" - - local port_hex i - - port_hex="$(printf "%04X" "${port}")" - for i in $(seq 10); do - ip netns exec "${listener_ns}" cat /proc/net/tcp* | \ - awk "BEGIN {rc=1} {if (\$2 ~ /:${port_hex}\$/ && \$4 ~ /0A/) {rc=0; exit}} END {exit rc}" && - break - sleep 0.1 - done -} - do_transfer() { local cin=$1 local sin=$2 local max_time=$3 local port - port=$((10000+$test_cnt)) - test_cnt=$((test_cnt+1)) + port=$((10000+MPTCP_LIB_TEST_COUNTER)) :> "$cout" :> "$sout" @@ -155,6 +136,7 @@ do_transfer() if $capture; then local capuser + local rndh="${ns1:4}" if [ -z $SUDO_USER ] ; then capuser="" else @@ -173,50 +155,61 @@ do_transfer() sleep 1 fi - timeout ${timeout_test} \ - ip netns exec ${ns3} \ - ./mptcp_connect -jt ${timeout_poll} -l -p $port -T $max_time \ - 0.0.0.0 < "$sin" > "$sout" & + mptcp_lib_nstat_init "${ns3}" + mptcp_lib_nstat_init "${ns1}" + + ip netns exec ${ns3} \ + ./mptcp_connect -jt ${timeout_poll} -l -p $port -T $max_time \ + 0.0.0.0 < "$sin" > "$sout" & local spid=$! - wait_local_port_listen "${ns3}" "${port}" + mptcp_lib_wait_local_port_listen "${ns3}" "${port}" - timeout ${timeout_test} \ - ip netns exec ${ns1} \ - ./mptcp_connect -jt ${timeout_poll} -p $port -T $max_time \ - 10.0.3.3 < "$cin" > "$cout" & + ip netns exec ${ns1} \ + ./mptcp_connect -jt ${timeout_poll} -p $port -T $max_time \ + 10.0.3.3 < "$cin" > "$cout" & local cpid=$! + mptcp_lib_wait_timeout "${timeout_test}" "${ns3}" "${ns1}" "${port}" \ + "${cpid}" "${spid}" & + local timeout_pid=$! + wait $cpid local retc=$? wait $spid local rets=$? + if kill -0 $timeout_pid; then + # Finished before the timeout: kill the background job + mptcp_lib_kill_group_wait $timeout_pid + timeout_pid=0 + fi + if $capture; then sleep 1 kill ${cappid_listener} kill ${cappid_connector} fi + mptcp_lib_nstat_get "${ns3}" + mptcp_lib_nstat_get "${ns1}" + cmp $sin $cout > /dev/null 2>&1 local cmps=$? cmp $cin $sout > /dev/null 2>&1 local cmpc=$? - printf "%-16s" " max $max_time " - if [ $retc -eq 0 ] && [ $rets -eq 0 ] && \ - [ $cmpc -eq 0 ] && [ $cmps -eq 0 ]; then - echo "[ OK ]" + if [ $retc -eq 0 ] && [ $rets -eq 0 ] && + [ $cmpc -eq 0 ] && [ $cmps -eq 0 ] && + [ $timeout_pid -eq 0 ]; then + printf "%-16s" " max $max_time " + mptcp_lib_pr_ok cat "$capout" return 0 fi - echo " [ fail ]" - echo "client exit code $retc, server $rets" 1>&2 - echo -e "\nnetns ${ns3} socket stat for $port:" 1>&2 - ip netns exec ${ns3} ss -nita 1>&2 -o "sport = :$port" - echo -e "\nnetns ${ns1} socket stat for $port:" 1>&2 - ip netns exec ${ns1} ss -nita 1>&2 -o "dport = :$port" + mptcp_lib_pr_fail "client exit code $retc, server $rets" + mptcp_lib_pr_err_stats "${ns3}" "${ns1}" "${port}" ls -l $sin $cout ls -l $cin $sout @@ -235,8 +228,8 @@ run_test() shift 4 local msg=$* - [ $delay1 -gt 0 ] && delay1="delay $delay1" || delay1="" - [ $delay2 -gt 0 ] && delay2="delay $delay2" || delay2="" + [ $delay1 -gt 0 ] && delay1="delay ${delay1}ms" || delay1="" + [ $delay2 -gt 0 ] && delay2="delay ${delay2}ms" || delay2="" for dev in ns1eth1 ns1eth2; do tc -n $ns1 qdisc del dev $dev root >/dev/null 2>&1 @@ -258,30 +251,31 @@ run_test() # completion (see mptcp_connect): 200ms on each side, add some slack time=$((time + 400 + slack)) - printf "%-60s" "$msg" + mptcp_lib_print_title "$msg" do_transfer $small $large $time lret=$? mptcp_lib_result_code "${lret}" "${msg}" - if [ $lret -ne 0 ]; then + if [ $lret -ne 0 ] && ! mptcp_lib_subtest_is_flaky; then ret=$lret [ $bail -eq 0 ] || exit $ret fi - printf "%-60s" "$msg - reverse direction" + msg+=" - reverse direction" + mptcp_lib_print_title "${msg}" do_transfer $large $small $time lret=$? mptcp_lib_result_code "${lret}" "${msg}" - if [ $lret -ne 0 ]; then + if [ $lret -ne 0 ] && ! mptcp_lib_subtest_is_flaky; then ret=$lret [ $bail -eq 0 ] || exit $ret fi } -while getopts "bcdh" option;do +while getopts "bcdhi" option;do case "$option" in "h") usage $0 - exit 0 + exit ${KSFT_PASS} ;; "b") bail=1 @@ -292,21 +286,25 @@ while getopts "bcdh" option;do "d") set -x ;; + "i") + mptcp_lib_set_ip_mptcp + ;; "?") usage $0 - exit 1 + exit ${KSFT_FAIL} ;; esac done setup +mptcp_lib_subtests_last_ts_reset run_test 10 10 0 0 "balanced bwidth" -run_test 10 10 1 50 "balanced bwidth with unbalanced delay" +run_test 10 10 1 25 "balanced bwidth with unbalanced delay" # we still need some additional infrastructure to pass the following test-cases -run_test 30 10 0 0 "unbalanced bwidth" -run_test 30 10 1 50 "unbalanced bwidth with unbalanced delay" -run_test 30 10 50 1 "unbalanced bwidth with opposed, unbalanced delay" +MPTCP_LIB_SUBTEST_FLAKY=1 run_test 10 3 0 0 "unbalanced bwidth" +run_test 10 3 1 25 "unbalanced bwidth with unbalanced delay" +run_test 10 3 25 1 "unbalanced bwidth with opposed, unbalanced delay" mptcp_lib_result_print_all_tap exit $ret |