summaryrefslogtreecommitdiff
path: root/tools/testing/selftests/net/traceroute.sh
diff options
context:
space:
mode:
Diffstat (limited to 'tools/testing/selftests/net/traceroute.sh')
-rwxr-xr-xtools/testing/selftests/net/traceroute.sh781
1 files changed, 781 insertions, 0 deletions
diff --git a/tools/testing/selftests/net/traceroute.sh b/tools/testing/selftests/net/traceroute.sh
new file mode 100755
index 000000000000..a7c6ab8a0347
--- /dev/null
+++ b/tools/testing/selftests/net/traceroute.sh
@@ -0,0 +1,781 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Run traceroute/traceroute6 tests
+#
+
+source lib.sh
+VERBOSE=0
+PAUSE_ON_FAIL=no
+
+################################################################################
+#
+run_cmd()
+{
+ local ns
+ local cmd
+ local out
+ local rc
+
+ ns="$1"
+ shift
+ cmd="$*"
+
+ if [ "$VERBOSE" = "1" ]; then
+ printf " COMMAND: $cmd\n"
+ fi
+
+ out=$(eval ip netns exec ${ns} ${cmd} 2>&1)
+ rc=$?
+ if [ "$VERBOSE" = "1" -a -n "$out" ]; then
+ echo " $out"
+ fi
+
+ [ "$VERBOSE" = "1" ] && echo
+
+ return $rc
+}
+
+__check_traceroute_version()
+{
+ local cmd=$1; shift
+ local req_ver=$1; shift
+ local ver
+
+ req_ver=$(echo "$req_ver" | sed 's/\.//g')
+ ver=$($cmd -V 2>&1 | grep -Eo '[0-9]+.[0-9]+.[0-9]+' | sed 's/\.//g')
+ if [[ $ver -lt $req_ver ]]; then
+ return 1
+ else
+ return 0
+ fi
+}
+
+check_traceroute6_version()
+{
+ local req_ver=$1; shift
+
+ __check_traceroute_version traceroute6 "$req_ver"
+}
+
+check_traceroute_version()
+{
+ local req_ver=$1; shift
+
+ __check_traceroute_version traceroute "$req_ver"
+}
+
+################################################################################
+# create namespaces and interconnects
+
+create_ns()
+{
+ local ns=$1
+ local addr=$2
+ local addr6=$3
+
+ [ -z "${addr}" ] && addr="-"
+ [ -z "${addr6}" ] && addr6="-"
+
+ if [ "${addr}" != "-" ]; then
+ ip netns exec ${ns} ip addr add dev lo ${addr}
+ fi
+ if [ "${addr6}" != "-" ]; then
+ ip netns exec ${ns} ip -6 addr add dev lo ${addr6}
+ fi
+
+ ip netns exec ${ns} ip ro add unreachable default metric 8192
+ ip netns exec ${ns} ip -6 ro add unreachable default metric 8192
+
+ ip netns exec ${ns} sysctl -qw net.ipv4.ip_forward=1
+ ip netns exec ${ns} sysctl -qw net.ipv4.icmp_ratelimit=0
+ ip netns exec ${ns} sysctl -qw net.ipv6.icmp.ratelimit=0
+ ip netns exec ${ns} sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1
+ ip netns exec ${ns} sysctl -qw net.ipv6.conf.all.forwarding=1
+ ip netns exec ${ns} sysctl -qw net.ipv6.conf.default.forwarding=1
+ ip netns exec ${ns} sysctl -qw net.ipv6.conf.default.accept_dad=0
+}
+
+# create veth pair to connect namespaces and apply addresses.
+connect_ns()
+{
+ local ns1=$1
+ local ns1_dev=$2
+ local ns1_addr=$3
+ local ns1_addr6=$4
+ local ns2=$5
+ local ns2_dev=$6
+ local ns2_addr=$7
+ local ns2_addr6=$8
+
+ ip netns exec ${ns1} ip li add ${ns1_dev} type veth peer name tmp
+ ip netns exec ${ns1} ip li set ${ns1_dev} up
+ ip netns exec ${ns1} ip li set tmp netns ${ns2} name ${ns2_dev}
+ ip netns exec ${ns2} ip li set ${ns2_dev} up
+
+ if [ "${ns1_addr}" != "-" ]; then
+ ip netns exec ${ns1} ip addr add dev ${ns1_dev} ${ns1_addr}
+ fi
+
+ if [ "${ns2_addr}" != "-" ]; then
+ ip netns exec ${ns2} ip addr add dev ${ns2_dev} ${ns2_addr}
+ fi
+
+ if [ "${ns1_addr6}" != "-" ]; then
+ ip netns exec ${ns1} ip addr add dev ${ns1_dev} ${ns1_addr6}
+ fi
+
+ if [ "${ns2_addr6}" != "-" ]; then
+ ip netns exec ${ns2} ip addr add dev ${ns2_dev} ${ns2_addr6}
+ fi
+}
+
+################################################################################
+# traceroute6 test
+#
+# Verify that in this scenario
+#
+# ------------------------ N2
+# | |
+# ------ ------ N3 ----
+# | R1 | | R2 |------|H2|
+# ------ ------ ----
+# | |
+# ------------------------ N1
+# |
+# ----
+# |H1|
+# ----
+#
+# where H1's default route goes through R1 and R1's default route goes
+# through R2 over N2, traceroute6 from H1 to H2 reports R2's address
+# on N2 and not N1.
+#
+# Addresses are assigned as follows:
+#
+# N1: 2000:101::/64
+# N2: 2000:102::/64
+# N3: 2000:103::/64
+#
+# R1's host part of address: 1
+# R2's host part of address: 2
+# H1's host part of address: 3
+# H2's host part of address: 4
+#
+# For example:
+# the IPv6 address of R1's interface on N2 is 2000:102::1/64
+
+cleanup_traceroute6()
+{
+ cleanup_ns $h1 $h2 $r1 $r2
+}
+
+setup_traceroute6()
+{
+ brdev=br0
+
+ # start clean
+ cleanup_traceroute6
+
+ set -e
+ setup_ns h1 h2 r1 r2
+ create_ns $h1
+ create_ns $h2
+ create_ns $r1
+ create_ns $r2
+
+ # Setup N3
+ connect_ns $r2 eth3 - 2000:103::2/64 $h2 eth3 - 2000:103::4/64
+ ip netns exec $h2 ip route add default via 2000:103::2
+
+ # Setup N2
+ connect_ns $r1 eth2 - 2000:102::1/64 $r2 eth2 - 2000:102::2/64
+ ip netns exec $r1 ip route add default via 2000:102::2
+
+ # Setup N1. host-1 and router-2 connect to a bridge in router-1.
+ ip netns exec $r1 ip link add name ${brdev} type bridge
+ ip netns exec $r1 ip link set ${brdev} up
+ ip netns exec $r1 ip addr add 2000:101::1/64 dev ${brdev}
+
+ connect_ns $h1 eth0 - 2000:101::3/64 $r1 eth0 - -
+ ip netns exec $r1 ip link set dev eth0 master ${brdev}
+ ip netns exec $h1 ip route add default via 2000:101::1
+
+ connect_ns $r2 eth1 - 2000:101::2/64 $r1 eth1 - -
+ ip netns exec $r1 ip link set dev eth1 master ${brdev}
+
+ # Prime the network
+ ip netns exec $h1 ping6 -c5 2000:103::4 >/dev/null 2>&1
+
+ set +e
+}
+
+run_traceroute6()
+{
+ setup_traceroute6
+
+ RET=0
+
+ # traceroute6 host-2 from host-1 (expects 2000:102::2)
+ run_cmd $h1 "traceroute6 2000:103::4 | grep -q 2000:102::2"
+ check_err $? "traceroute6 did not return 2000:102::2"
+ log_test "IPv6 traceroute"
+
+ cleanup_traceroute6
+}
+
+################################################################################
+# traceroute6 with VRF test
+#
+# Verify that in this scenario
+#
+# ------------------------ N2
+# | |
+# ------ ------ N3 ----
+# | R1 | | R2 |------|H2|
+# ------ ------ ----
+# | |
+# ------------------------ N1
+# |
+# ----
+# |H1|
+# ----
+#
+# Where H1's default route goes through R1 and R1's default route goes through
+# R2 over N2, traceroute6 from H1 to H2 reports R2's address on N2 and not N1.
+# The interfaces connecting R2 to the different subnets are membmer in a VRF
+# and the intention is to check that traceroute6 does not report the VRF's
+# address.
+#
+# Addresses are assigned as follows:
+#
+# N1: 2000:101::/64
+# N2: 2000:102::/64
+# N3: 2000:103::/64
+#
+# R1's host part of address: 1
+# R2's host part of address: 2
+# H1's host part of address: 3
+# H2's host part of address: 4
+#
+# For example:
+# the IPv6 address of R1's interface on N2 is 2000:102::1/64
+
+cleanup_traceroute6_vrf()
+{
+ cleanup_all_ns
+}
+
+setup_traceroute6_vrf()
+{
+ # Start clean
+ cleanup_traceroute6_vrf
+
+ setup_ns h1 h2 r1 r2
+ create_ns "$h1"
+ create_ns "$h2"
+ create_ns "$r1"
+ create_ns "$r2"
+
+ ip -n "$r2" link add name vrf100 up type vrf table 100
+ ip -n "$r2" addr add 2001:db8:100::1/64 dev vrf100
+
+ # Setup N3
+ connect_ns "$r2" eth3 - 2000:103::2/64 "$h2" eth3 - 2000:103::4/64
+
+ ip -n "$r2" link set dev eth3 master vrf100
+
+ ip -n "$h2" route add default via 2000:103::2
+
+ # Setup N2
+ connect_ns "$r1" eth2 - 2000:102::1/64 "$r2" eth2 - 2000:102::2/64
+
+ ip -n "$r1" route add default via 2000:102::2
+
+ ip -n "$r2" link set dev eth2 master vrf100
+
+ # Setup N1. host-1 and router-2 connect to a bridge in router-1.
+ ip -n "$r1" link add name br100 up type bridge
+ ip -n "$r1" addr add 2000:101::1/64 dev br100
+
+ connect_ns "$h1" eth0 - 2000:101::3/64 "$r1" eth0 - -
+
+ ip -n "$h1" route add default via 2000:101::1
+
+ ip -n "$r1" link set dev eth0 master br100
+
+ connect_ns "$r2" eth1 - 2000:101::2/64 "$r1" eth1 - -
+
+ ip -n "$r2" link set dev eth1 master vrf100
+
+ ip -n "$r1" link set dev eth1 master br100
+
+ # Prime the network
+ ip netns exec "$h1" ping6 -c5 2000:103::4 >/dev/null 2>&1
+}
+
+run_traceroute6_vrf()
+{
+ setup_traceroute6_vrf
+
+ RET=0
+
+ # traceroute6 host-2 from host-1 (expects 2000:102::2)
+ run_cmd "$h1" "traceroute6 2000:103::4 | grep 2000:102::2"
+ check_err $? "traceroute6 did not return 2000:102::2"
+ log_test "IPv6 traceroute with VRF"
+
+ cleanup_traceroute6_vrf
+}
+
+################################################################################
+# traceroute6 with ICMP extensions test
+#
+# Verify that in this scenario
+#
+# ---- ---- ----
+# |H1|--------------------------|R1|--------------------------|H2|
+# ---- N1 ---- N2 ----
+#
+# ICMP extensions are correctly reported. The loopback interfaces on all the
+# nodes are assigned global addresses and the interfaces connecting the nodes
+# are assigned IPv6 link-local addresses.
+
+cleanup_traceroute6_ext()
+{
+ cleanup_all_ns
+}
+
+setup_traceroute6_ext()
+{
+ # Start clean
+ cleanup_traceroute6_ext
+
+ setup_ns h1 r1 h2
+ create_ns "$h1"
+ create_ns "$r1"
+ create_ns "$h2"
+
+ # Setup N1
+ connect_ns "$h1" eth1 - fe80::1/64 "$r1" eth1 - fe80::2/64
+ # Setup N2
+ connect_ns "$r1" eth2 - fe80::3/64 "$h2" eth2 - fe80::4/64
+
+ # Setup H1
+ ip -n "$h1" address add 2001:db8:1::1/128 dev lo
+ ip -n "$h1" route add ::/0 nexthop via fe80::2 dev eth1
+
+ # Setup R1
+ ip -n "$r1" address add 2001:db8:1::2/128 dev lo
+ ip -n "$r1" route add 2001:db8:1::1/128 nexthop via fe80::1 dev eth1
+ ip -n "$r1" route add 2001:db8:1::3/128 nexthop via fe80::4 dev eth2
+
+ # Setup H2
+ ip -n "$h2" address add 2001:db8:1::3/128 dev lo
+ ip -n "$h2" route add ::/0 nexthop via fe80::3 dev eth2
+
+ # Prime the network
+ ip netns exec "$h1" ping6 -c5 2001:db8:1::3 >/dev/null 2>&1
+}
+
+traceroute6_ext_iio_iif_test()
+{
+ local r1_ifindex h2_ifindex
+ local pkt_len=$1; shift
+
+ # Test that incoming interface info is not appended by default.
+ run_cmd "$h1" "traceroute6 -e 2001:db8:1::3 $pkt_len | grep INC"
+ check_fail $? "Incoming interface info appended by default when should not"
+
+ # Test that the extension is appended when enabled.
+ run_cmd "$r1" "bash -c \"echo 0x01 > /proc/sys/net/ipv6/icmp/errors_extension_mask\""
+ check_err $? "Failed to enable incoming interface info extension on R1"
+
+ run_cmd "$h1" "traceroute6 -e 2001:db8:1::3 $pkt_len | grep INC"
+ check_err $? "Incoming interface info not appended after enable"
+
+ # Test that the extension is not appended when disabled.
+ run_cmd "$r1" "bash -c \"echo 0x00 > /proc/sys/net/ipv6/icmp/errors_extension_mask\""
+ check_err $? "Failed to disable incoming interface info extension on R1"
+
+ run_cmd "$h1" "traceroute6 -e 2001:db8:1::3 $pkt_len | grep INC"
+ check_fail $? "Incoming interface info appended after disable"
+
+ # Test that the extension is sent correctly from both R1 and H2.
+ run_cmd "$r1" "sysctl -w net.ipv6.icmp.errors_extension_mask=0x01"
+ r1_ifindex=$(ip -n "$r1" -j link show dev eth1 | jq '.[]["ifindex"]')
+ run_cmd "$h1" "traceroute6 -e 2001:db8:1::3 $pkt_len | grep '<INC:$r1_ifindex,\"eth1\",mtu=1500>'"
+ check_err $? "Wrong incoming interface info reported from R1"
+
+ run_cmd "$h2" "sysctl -w net.ipv6.icmp.errors_extension_mask=0x01"
+ h2_ifindex=$(ip -n "$h2" -j link show dev eth2 | jq '.[]["ifindex"]')
+ run_cmd "$h1" "traceroute6 -e 2001:db8:1::3 $pkt_len | grep '<INC:$h2_ifindex,\"eth2\",mtu=1500>'"
+ check_err $? "Wrong incoming interface info reported from H2"
+
+ # Add a global address on the incoming interface of R1 and check that
+ # it is reported.
+ run_cmd "$r1" "ip address add 2001:db8:100::1/64 dev eth1 nodad"
+ run_cmd "$h1" "traceroute6 -e 2001:db8:1::3 $pkt_len | grep '<INC:$r1_ifindex,2001:db8:100::1,\"eth1\",mtu=1500>'"
+ check_err $? "Wrong incoming interface info reported from R1 after address addition"
+ run_cmd "$r1" "ip address del 2001:db8:100::1/64 dev eth1"
+
+ # Change name and MTU and make sure the result is still correct.
+ run_cmd "$r1" "ip link set dev eth1 name eth1tag mtu 1501"
+ run_cmd "$h1" "traceroute6 -e 2001:db8:1::3 $pkt_len | grep '<INC:$r1_ifindex,\"eth1tag\",mtu=1501>'"
+ check_err $? "Wrong incoming interface info reported from R1 after name and MTU change"
+ run_cmd "$r1" "ip link set dev eth1tag name eth1 mtu 1500"
+
+ run_cmd "$r1" "sysctl -w net.ipv6.icmp.errors_extension_mask=0x00"
+ run_cmd "$h2" "sysctl -w net.ipv6.icmp.errors_extension_mask=0x00"
+}
+
+run_traceroute6_ext()
+{
+ # Need at least version 2.1.5 for RFC 5837 support.
+ if ! check_traceroute6_version 2.1.5; then
+ log_test_skip "traceroute6 too old, missing ICMP extensions support"
+ return
+ fi
+
+ setup_traceroute6_ext
+
+ RET=0
+
+ ## General ICMP extensions tests
+
+ # Test that ICMP extensions are disabled by default.
+ run_cmd "$h1" "sysctl net.ipv6.icmp.errors_extension_mask | grep \"= 0$\""
+ check_err $? "ICMP extensions are not disabled by default"
+
+ # Test that unsupported values are rejected. Do not use "sysctl" as
+ # older versions do not return an error code upon failure.
+ run_cmd "$h1" "bash -c \"echo 0x80 > /proc/sys/net/ipv6/icmp/errors_extension_mask\""
+ check_fail $? "Unsupported sysctl value was not rejected"
+
+ ## Extension-specific tests
+
+ # Incoming interface info test. Test with various packet sizes,
+ # including the default one.
+ traceroute6_ext_iio_iif_test
+ traceroute6_ext_iio_iif_test 127
+ traceroute6_ext_iio_iif_test 128
+ traceroute6_ext_iio_iif_test 129
+
+ log_test "IPv6 traceroute with ICMP extensions"
+
+ cleanup_traceroute6_ext
+}
+
+################################################################################
+# traceroute test
+#
+# Verify that traceroute from H1 to H2 shows 1.0.3.1 and 1.0.1.1 when
+# traceroute uses 1.0.3.3 and 1.0.1.3 as the source IP, respectively.
+#
+# 1.0.3.3/24 1.0.3.1/24
+# ---- 1.0.1.3/24 1.0.1.1/24 ---- 1.0.2.1/24 1.0.2.4/24 ----
+# |H1|--------------------------|R1|--------------------------|H2|
+# ---- N1 ---- N2 ----
+#
+# where net.ipv4.icmp_errors_use_inbound_ifaddr is set on R1 and 1.0.3.1/24 and
+# 1.0.1.1/24 are R1's primary addresses on N1. The kernel is expected to prefer
+# a source address that is on the same subnet as the destination IP of the ICMP
+# error message.
+
+cleanup_traceroute()
+{
+ cleanup_ns $h1 $h2 $router
+}
+
+setup_traceroute()
+{
+ # start clean
+ cleanup_traceroute
+
+ set -e
+ setup_ns h1 h2 router
+ create_ns $h1
+ create_ns $h2
+ create_ns $router
+
+ connect_ns $h1 eth0 1.0.1.3/24 - \
+ $router eth1 1.0.3.1/24 -
+ ip -n "$h1" addr add 1.0.3.3/24 dev eth0
+ ip netns exec $h1 ip route add default via 1.0.1.1
+
+ ip netns exec $router ip addr add 1.0.1.1/24 dev eth1
+ ip netns exec $router sysctl -qw \
+ net.ipv4.icmp_errors_use_inbound_ifaddr=1
+
+ connect_ns $h2 eth0 1.0.2.4/24 - \
+ $router eth2 1.0.2.1/24 -
+ ip netns exec $h2 ip route add default via 1.0.2.1
+
+ # Prime the network
+ ip netns exec $h1 ping -c5 1.0.2.4 >/dev/null 2>&1
+
+ set +e
+}
+
+run_traceroute()
+{
+ setup_traceroute
+
+ RET=0
+
+ # traceroute host-2 from host-1. Expect a source IP that is on the same
+ # subnet as destination IP of the ICMP error message.
+ run_cmd "$h1" "traceroute -s 1.0.1.3 1.0.2.4 | grep -q 1.0.1.1"
+ check_err $? "traceroute did not return 1.0.1.1"
+ run_cmd "$h1" "traceroute -s 1.0.3.3 1.0.2.4 | grep -q 1.0.3.1"
+ check_err $? "traceroute did not return 1.0.3.1"
+ log_test "IPv4 traceroute"
+
+ cleanup_traceroute
+}
+
+################################################################################
+# traceroute with VRF test
+#
+# Verify that traceroute from H1 to H2 shows 1.0.3.1 and 1.0.1.1 when
+# traceroute uses 1.0.3.3 and 1.0.1.3 as the source IP, respectively. The
+# intention is to check that the kernel does not choose an IP assigned to the
+# VRF device, but rather an address from the VRF port (eth1) that received the
+# packet that generates the ICMP error message.
+#
+# 1.0.4.1/24 (vrf100)
+# 1.0.3.3/24 1.0.3.1/24
+# ---- 1.0.1.3/24 1.0.1.1/24 ---- 1.0.2.1/24 1.0.2.4/24 ----
+# |H1|--------------------------|R1|--------------------------|H2|
+# ---- N1 ---- N2 ----
+
+cleanup_traceroute_vrf()
+{
+ cleanup_all_ns
+}
+
+setup_traceroute_vrf()
+{
+ # Start clean
+ cleanup_traceroute_vrf
+
+ setup_ns h1 h2 router
+ create_ns "$h1"
+ create_ns "$h2"
+ create_ns "$router"
+
+ ip -n "$router" link add name vrf100 up type vrf table 100
+ ip -n "$router" addr add 1.0.4.1/24 dev vrf100
+
+ connect_ns "$h1" eth0 1.0.1.3/24 - \
+ "$router" eth1 1.0.1.1/24 -
+
+ ip -n "$h1" addr add 1.0.3.3/24 dev eth0
+ ip -n "$h1" route add default via 1.0.1.1
+
+ ip -n "$router" link set dev eth1 master vrf100
+ ip -n "$router" addr add 1.0.3.1/24 dev eth1
+ ip netns exec "$router" sysctl -qw \
+ net.ipv4.icmp_errors_use_inbound_ifaddr=1
+
+ connect_ns "$h2" eth0 1.0.2.4/24 - \
+ "$router" eth2 1.0.2.1/24 -
+
+ ip -n "$h2" route add default via 1.0.2.1
+
+ ip -n "$router" link set dev eth2 master vrf100
+
+ # Prime the network
+ ip netns exec "$h1" ping -c5 1.0.2.4 >/dev/null 2>&1
+}
+
+run_traceroute_vrf()
+{
+ setup_traceroute_vrf
+
+ RET=0
+
+ # traceroute host-2 from host-1. Expect a source IP that is on the same
+ # subnet as destination IP of the ICMP error message.
+ run_cmd "$h1" "traceroute -s 1.0.1.3 1.0.2.4 | grep 1.0.1.1"
+ check_err $? "traceroute did not return 1.0.1.1"
+ run_cmd "$h1" "traceroute -s 1.0.3.3 1.0.2.4 | grep 1.0.3.1"
+ check_err $? "traceroute did not return 1.0.3.1"
+ log_test "IPv4 traceroute with VRF"
+
+ cleanup_traceroute_vrf
+}
+
+################################################################################
+# traceroute with ICMP extensions test
+#
+# Verify that in this scenario
+#
+# ---- ---- ----
+# |H1|--------------------------|R1|--------------------------|H2|
+# ---- N1 ---- N2 ----
+#
+# ICMP extensions are correctly reported. The loopback interfaces on all the
+# nodes are assigned global addresses and the interfaces connecting the nodes
+# are assigned IPv6 link-local addresses.
+
+cleanup_traceroute_ext()
+{
+ cleanup_all_ns
+}
+
+setup_traceroute_ext()
+{
+ # Start clean
+ cleanup_traceroute_ext
+
+ setup_ns h1 r1 h2
+ create_ns "$h1"
+ create_ns "$r1"
+ create_ns "$h2"
+
+ # Setup N1
+ connect_ns "$h1" eth1 - fe80::1/64 "$r1" eth1 - fe80::2/64
+ # Setup N2
+ connect_ns "$r1" eth2 - fe80::3/64 "$h2" eth2 - fe80::4/64
+
+ # Setup H1
+ ip -n "$h1" address add 192.0.2.1/32 dev lo
+ ip -n "$h1" route add 0.0.0.0/0 nexthop via inet6 fe80::2 dev eth1
+
+ # Setup R1
+ ip -n "$r1" address add 192.0.2.2/32 dev lo
+ ip -n "$r1" route add 192.0.2.1/32 nexthop via inet6 fe80::1 dev eth1
+ ip -n "$r1" route add 192.0.2.3/32 nexthop via inet6 fe80::4 dev eth2
+
+ # Setup H2
+ ip -n "$h2" address add 192.0.2.3/32 dev lo
+ ip -n "$h2" route add 0.0.0.0/0 nexthop via inet6 fe80::3 dev eth2
+
+ # Prime the network
+ ip netns exec "$h1" ping -c5 192.0.2.3 >/dev/null 2>&1
+}
+
+traceroute_ext_iio_iif_test()
+{
+ local r1_ifindex h2_ifindex
+ local pkt_len=$1; shift
+
+ # Test that incoming interface info is not appended by default.
+ run_cmd "$h1" "traceroute -e 192.0.2.3 $pkt_len | grep INC"
+ check_fail $? "Incoming interface info appended by default when should not"
+
+ # Test that the extension is appended when enabled.
+ run_cmd "$r1" "bash -c \"echo 0x01 > /proc/sys/net/ipv4/icmp_errors_extension_mask\""
+ check_err $? "Failed to enable incoming interface info extension on R1"
+
+ run_cmd "$h1" "traceroute -e 192.0.2.3 $pkt_len | grep INC"
+ check_err $? "Incoming interface info not appended after enable"
+
+ # Test that the extension is not appended when disabled.
+ run_cmd "$r1" "bash -c \"echo 0x00 > /proc/sys/net/ipv4/icmp_errors_extension_mask\""
+ check_err $? "Failed to disable incoming interface info extension on R1"
+
+ run_cmd "$h1" "traceroute -e 192.0.2.3 $pkt_len | grep INC"
+ check_fail $? "Incoming interface info appended after disable"
+
+ # Test that the extension is sent correctly from both R1 and H2.
+ run_cmd "$r1" "sysctl -w net.ipv4.icmp_errors_extension_mask=0x01"
+ r1_ifindex=$(ip -n "$r1" -j link show dev eth1 | jq '.[]["ifindex"]')
+ run_cmd "$h1" "traceroute -e 192.0.2.3 $pkt_len | grep '<INC:$r1_ifindex,\"eth1\",mtu=1500>'"
+ check_err $? "Wrong incoming interface info reported from R1"
+
+ run_cmd "$h2" "sysctl -w net.ipv4.icmp_errors_extension_mask=0x01"
+ h2_ifindex=$(ip -n "$h2" -j link show dev eth2 | jq '.[]["ifindex"]')
+ run_cmd "$h1" "traceroute -e 192.0.2.3 $pkt_len | grep '<INC:$h2_ifindex,\"eth2\",mtu=1500>'"
+ check_err $? "Wrong incoming interface info reported from H2"
+
+ # Add a global address on the incoming interface of R1 and check that
+ # it is reported.
+ run_cmd "$r1" "ip address add 198.51.100.1/24 dev eth1"
+ run_cmd "$h1" "traceroute -e 192.0.2.3 $pkt_len | grep '<INC:$r1_ifindex,198.51.100.1,\"eth1\",mtu=1500>'"
+ check_err $? "Wrong incoming interface info reported from R1 after address addition"
+ run_cmd "$r1" "ip address del 198.51.100.1/24 dev eth1"
+
+ # Change name and MTU and make sure the result is still correct.
+ # Re-add the route towards H1 since it was deleted when we removed the
+ # last IPv4 address from eth1 on R1.
+ run_cmd "$r1" "ip route add 192.0.2.1/32 nexthop via inet6 fe80::1 dev eth1"
+ run_cmd "$r1" "ip link set dev eth1 name eth1tag mtu 1501"
+ run_cmd "$h1" "traceroute -e 192.0.2.3 $pkt_len | grep '<INC:$r1_ifindex,\"eth1tag\",mtu=1501>'"
+ check_err $? "Wrong incoming interface info reported from R1 after name and MTU change"
+ run_cmd "$r1" "ip link set dev eth1tag name eth1 mtu 1500"
+
+ run_cmd "$r1" "sysctl -w net.ipv4.icmp_errors_extension_mask=0x00"
+ run_cmd "$h2" "sysctl -w net.ipv4.icmp_errors_extension_mask=0x00"
+}
+
+run_traceroute_ext()
+{
+ # Need at least version 2.1.5 for RFC 5837 support.
+ if ! check_traceroute_version 2.1.5; then
+ log_test_skip "traceroute too old, missing ICMP extensions support"
+ return
+ fi
+
+ setup_traceroute_ext
+
+ RET=0
+
+ ## General ICMP extensions tests
+
+ # Test that ICMP extensions are disabled by default.
+ run_cmd "$h1" "sysctl net.ipv4.icmp_errors_extension_mask | grep \"= 0$\""
+ check_err $? "ICMP extensions are not disabled by default"
+
+ # Test that unsupported values are rejected. Do not use "sysctl" as
+ # older versions do not return an error code upon failure.
+ run_cmd "$h1" "bash -c \"echo 0x80 > /proc/sys/net/ipv4/icmp_errors_extension_mask\""
+ check_fail $? "Unsupported sysctl value was not rejected"
+
+ ## Extension-specific tests
+
+ # Incoming interface info test. Test with various packet sizes,
+ # including the default one.
+ traceroute_ext_iio_iif_test
+ traceroute_ext_iio_iif_test 127
+ traceroute_ext_iio_iif_test 128
+ traceroute_ext_iio_iif_test 129
+
+ log_test "IPv4 traceroute with ICMP extensions"
+
+ cleanup_traceroute_ext
+}
+
+################################################################################
+# Run tests
+
+run_tests()
+{
+ run_traceroute6
+ run_traceroute6_vrf
+ run_traceroute6_ext
+ run_traceroute
+ run_traceroute_vrf
+ run_traceroute_ext
+}
+
+################################################################################
+# main
+
+while getopts :pv o
+do
+ case $o in
+ p) PAUSE_ON_FAIL=yes;;
+ v) VERBOSE=$(($VERBOSE + 1));;
+ *) exit 1;;
+ esac
+done
+
+require_command traceroute6
+require_command traceroute
+require_command jq
+
+run_tests
+
+exit "${EXIT_STATUS}"
generated by cgit (git 2.34.1) at 2025-12-25 23:43:02 +0000