summaryrefslogtreecommitdiff
path: root/tools/testing/selftests/sysctl/sysctl.sh
diff options
context:
space:
mode:
Diffstat (limited to 'tools/testing/selftests/sysctl/sysctl.sh')
-rwxr-xr-xtools/testing/selftests/sysctl/sysctl.sh507
1 files changed, 413 insertions, 94 deletions
diff --git a/tools/testing/selftests/sysctl/sysctl.sh b/tools/testing/selftests/sysctl/sysctl.sh
index 584eb8ea780a..b2d8bd9026a7 100755
--- a/tools/testing/selftests/sysctl/sysctl.sh
+++ b/tools/testing/selftests/sysctl/sysctl.sh
@@ -1,16 +1,6 @@
-#!/bin/bash
+#!/usr/bin/env bash
+# SPDX-License-Identifier: GPL-2.0-or-later OR copyleft-next-0.3.1
# Copyright (C) 2017 Luis R. Rodriguez <mcgrof@kernel.org>
-#
-# This program is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by the Free
-# Software Foundation; either version 2 of the License, or at your option any
-# later version; or, when distributed separately from the Linux kernel or
-# when incorporated into other software packages, subject to the following
-# license:
-#
-# This program is free software; you can redistribute it and/or modify it
-# under the terms of copyleft-next (version 0.3.1 or later) as published
-# at http://copyleft-next.org/.
# This performs a series tests against the proc sysctl interface.
@@ -24,29 +14,29 @@ TEST_FILE=$(mktemp)
# This represents
#
-# TEST_ID:TEST_COUNT:ENABLED
+# TEST_ID:TEST_COUNT:ENABLED:TARGET:SKIP_NO_TARGET
#
# TEST_ID: is the test id number
# TEST_COUNT: number of times we should run the test
# ENABLED: 1 if enabled, 0 otherwise
+# TARGET: test target file required on the test_sysctl module
+# SKIP_NO_TARGET: 1 skip if TARGET not there
+# 0 run even though TARGET not there
#
# Once these are enabled please leave them as-is. Write your own test,
# we have tons of space.
-ALL_TESTS="0001:1:1"
-ALL_TESTS="$ALL_TESTS 0002:1:1"
-ALL_TESTS="$ALL_TESTS 0003:1:1"
-ALL_TESTS="$ALL_TESTS 0004:1:1"
-ALL_TESTS="$ALL_TESTS 0005:3:1"
-
-test_modprobe()
-{
- if [ ! -d $DIR ]; then
- echo "$0: $DIR not present" >&2
- echo "You must have the following enabled in your kernel:" >&2
- cat $TEST_DIR/config >&2
- exit $ksft_skip
- fi
-}
+ALL_TESTS="0001:1:1:int_0001:1"
+ALL_TESTS="$ALL_TESTS 0002:1:1:string_0001:1"
+ALL_TESTS="$ALL_TESTS 0003:1:1:int_0002:1"
+ALL_TESTS="$ALL_TESTS 0004:1:1:uint_0001:1"
+ALL_TESTS="$ALL_TESTS 0005:3:1:int_0003:1"
+ALL_TESTS="$ALL_TESTS 0006:50:1:bitmap_0001:1"
+ALL_TESTS="$ALL_TESTS 0007:1:1:boot_int:1"
+ALL_TESTS="$ALL_TESTS 0008:1:1:match_int:1"
+ALL_TESTS="$ALL_TESTS 0009:1:1:unregister_error:0"
+ALL_TESTS="$ALL_TESTS 0010:1:1:mnt/mnt_error:0"
+ALL_TESTS="$ALL_TESTS 0011:1:1:empty_add:0"
+ALL_TESTS="$ALL_TESTS 0012:1:1:u8_valid:0"
function allow_user_defaults()
{
@@ -75,7 +65,7 @@ function check_production_sysctl_writes_strict()
else
old_strict=$(cat ${WRITES_STRICT})
if [ "$old_strict" = "1" ]; then
- echo "ok"
+ echo "OK"
else
echo "FAIL, strict value is 0 but force to 1 to continue" >&2
echo "1" > ${WRITES_STRICT}
@@ -120,13 +110,15 @@ test_reqs()
function load_req_mod()
{
- if [ ! -d $DIR ]; then
+ if [ ! -d $SYSCTL ]; then
if ! modprobe -q -n $TEST_DRIVER; then
echo "$0: module $TEST_DRIVER not found [SKIP]"
+ echo "You must set CONFIG_TEST_SYSCTL=m in your kernel" >&2
exit $ksft_skip
fi
modprobe $TEST_DRIVER
if [ $? -ne 0 ]; then
+ echo "$0: modprobe $TEST_DRIVER failed."
exit
fi
fi
@@ -149,6 +141,9 @@ reset_vals()
string_0001)
VAL="(none)"
;;
+ bitmap_0001)
+ VAL=""
+ ;;
*)
;;
esac
@@ -157,8 +152,10 @@ reset_vals()
set_orig()
{
- if [ ! -z $TARGET ]; then
- echo "${ORIG}" > "${TARGET}"
+ if [ ! -z $TARGET ] && [ ! -z $ORIG ]; then
+ if [ -f ${TARGET} ]; then
+ echo "${ORIG}" > "${TARGET}"
+ fi
fi
}
@@ -177,9 +174,25 @@ verify()
return 0
}
+# proc files get read a page at a time, which can confuse diff,
+# and get you incorrect results on proc files with long data. To use
+# diff against them you must first extract the output to a file, and
+# then compare against that file.
+verify_diff_proc_file()
+{
+ TMP_DUMP_FILE=$(mktemp)
+ cat $1 > $TMP_DUMP_FILE
+
+ if ! diff -w -q $TMP_DUMP_FILE $2; then
+ return 1
+ else
+ return 0
+ fi
+}
+
verify_diff_w()
{
- echo "$TEST_STR" | diff -q -w -u - $1
+ echo "$TEST_STR" | diff -q -w -u - $1 > /dev/null
return $?
}
@@ -214,7 +227,7 @@ run_numerictests()
echo "FAIL" >&2
exit 1
else
- echo "ok"
+ echo "OK"
fi
echo -n "Checking sysctl is not set to test value ... "
@@ -222,7 +235,7 @@ run_numerictests()
echo "FAIL" >&2
exit 1
else
- echo "ok"
+ echo "OK"
fi
echo -n "Writing sysctl from shell ... "
@@ -231,7 +244,7 @@ run_numerictests()
echo "FAIL" >&2
exit 1
else
- echo "ok"
+ echo "OK"
fi
echo -n "Resetting sysctl to original value ... "
@@ -240,7 +253,7 @@ run_numerictests()
echo "FAIL" >&2
exit 1
else
- echo "ok"
+ echo "OK"
fi
# Now that we've validated the sanity of "set_test" and "set_orig",
@@ -254,7 +267,7 @@ run_numerictests()
echo "FAIL" >&2
rc=1
else
- echo "ok"
+ echo "OK"
fi
echo -n "Writing middle of sysctl after synchronized seek ... "
@@ -264,7 +277,7 @@ run_numerictests()
echo "FAIL" >&2
rc=1
else
- echo "ok"
+ echo "OK"
fi
echo -n "Writing beyond end of sysctl ... "
@@ -274,7 +287,7 @@ run_numerictests()
echo "FAIL" >&2
rc=1
else
- echo "ok"
+ echo "OK"
fi
echo -n "Writing sysctl with multiple long writes ... "
@@ -285,15 +298,67 @@ run_numerictests()
echo "FAIL" >&2
rc=1
else
- echo "ok"
+ echo "OK"
+ fi
+ test_rc
+}
+
+check_failure()
+{
+ echo -n "Testing that $1 fails as expected ... "
+ reset_vals
+ TEST_STR="$1"
+ orig="$(cat $TARGET)"
+ echo -n "$TEST_STR" > $TARGET 2> /dev/null
+
+ # write should fail and $TARGET should retain its original value
+ if [ $? = 0 ] || [ "$(cat $TARGET)" != "$orig" ]; then
+ echo "FAIL" >&2
+ rc=1
+ else
+ echo "OK"
fi
test_rc
}
+run_wideint_tests()
+{
+ # sysctl conversion functions receive a boolean sign and ulong
+ # magnitude; here we list the magnitudes we want to test (each of
+ # which will be tested in both positive and negative forms). Since
+ # none of these values fit in 32 bits, writing them to an int- or
+ # uint-typed sysctl should fail.
+ local magnitudes=(
+ # common boundary-condition values (zero, +1, -1, INT_MIN,
+ # and INT_MAX respectively) if truncated to lower 32 bits
+ # (potential for being falsely deemed in range)
+ 0x0000000100000000
+ 0x0000000100000001
+ 0x00000001ffffffff
+ 0x0000000180000000
+ 0x000000017fffffff
+
+ # these look like negatives, but without a leading '-' are
+ # actually large positives (should be rejected as above
+ # despite being zero/+1/-1/INT_MIN/INT_MAX in the lower 32)
+ 0xffffffff00000000
+ 0xffffffff00000001
+ 0xffffffffffffffff
+ 0xffffffff80000000
+ 0xffffffff7fffffff
+ )
+
+ for sign in '' '-'; do
+ for mag in "${magnitudes[@]}"; do
+ check_failure "${sign}${mag}"
+ done
+ done
+}
+
# Your test must accept digits 3 and 4 to use this
run_limit_digit()
{
- echo -n "Checking ignoring spaces up to PAGE_SIZE works on write ..."
+ echo -n "Checking ignoring spaces up to PAGE_SIZE works on write ... "
reset_vals
LIMIT=$((MAX_DIGITS -1))
@@ -305,11 +370,11 @@ run_limit_digit()
echo "FAIL" >&2
rc=1
else
- echo "ok"
+ echo "OK"
fi
test_rc
- echo -n "Checking passing PAGE_SIZE of spaces fails on write ..."
+ echo -n "Checking passing PAGE_SIZE of spaces fails on write ... "
reset_vals
LIMIT=$((MAX_DIGITS))
@@ -321,7 +386,7 @@ run_limit_digit()
echo "FAIL" >&2
rc=1
else
- echo "ok"
+ echo "OK"
fi
test_rc
}
@@ -329,7 +394,7 @@ run_limit_digit()
# You are using an int
run_limit_digit_int()
{
- echo -n "Testing INT_MAX works ..."
+ echo -n "Testing INT_MAX works ... "
reset_vals
TEST_STR="$INT_MAX"
echo -n $TEST_STR > $TARGET
@@ -338,11 +403,11 @@ run_limit_digit_int()
echo "FAIL" >&2
rc=1
else
- echo "ok"
+ echo "OK"
fi
test_rc
- echo -n "Testing INT_MAX + 1 will fail as expected..."
+ echo -n "Testing INT_MAX + 1 will fail as expected ... "
reset_vals
let TEST_STR=$INT_MAX+1
echo -n $TEST_STR > $TARGET 2> /dev/null
@@ -351,11 +416,11 @@ run_limit_digit_int()
echo "FAIL" >&2
rc=1
else
- echo "ok"
+ echo "OK"
fi
test_rc
- echo -n "Testing negative values will work as expected..."
+ echo -n "Testing negative values will work as expected ... "
reset_vals
TEST_STR="-3"
echo -n $TEST_STR > $TARGET 2> /dev/null
@@ -363,7 +428,7 @@ run_limit_digit_int()
echo "FAIL" >&2
rc=1
else
- echo "ok"
+ echo "OK"
fi
test_rc
}
@@ -379,7 +444,7 @@ run_limit_digit_int_array()
echo "FAIL" >&2
rc=1
else
- echo "ok"
+ echo "OK"
fi
test_rc
@@ -396,7 +461,7 @@ run_limit_digit_int_array()
echo "FAIL" >&2
rc=1
else
- echo "ok"
+ echo "OK"
fi
test_rc
@@ -414,7 +479,7 @@ run_limit_digit_int_array()
echo "FAIL" >&2
rc=1
else
- echo "ok"
+ echo "OK"
fi
test_rc
@@ -431,7 +496,7 @@ run_limit_digit_int_array()
echo "FAIL" >&2
rc=1
else
- echo "ok"
+ echo "OK"
fi
test_rc
}
@@ -439,7 +504,7 @@ run_limit_digit_int_array()
# You are using an unsigned int
run_limit_digit_uint()
{
- echo -n "Testing UINT_MAX works ..."
+ echo -n "Testing UINT_MAX works ... "
reset_vals
TEST_STR="$UINT_MAX"
echo -n $TEST_STR > $TARGET
@@ -448,11 +513,11 @@ run_limit_digit_uint()
echo "FAIL" >&2
rc=1
else
- echo "ok"
+ echo "OK"
fi
test_rc
- echo -n "Testing UINT_MAX + 1 will fail as expected..."
+ echo -n "Testing UINT_MAX + 1 will fail as expected ... "
reset_vals
TEST_STR=$(($UINT_MAX+1))
echo -n $TEST_STR > $TARGET 2> /dev/null
@@ -461,11 +526,11 @@ run_limit_digit_uint()
echo "FAIL" >&2
rc=1
else
- echo "ok"
+ echo "OK"
fi
test_rc
- echo -n "Testing negative values will not work as expected ..."
+ echo -n "Testing negative values will not work as expected ... "
reset_vals
TEST_STR="-3"
echo -n $TEST_STR > $TARGET 2> /dev/null
@@ -474,7 +539,7 @@ run_limit_digit_uint()
echo "FAIL" >&2
rc=1
else
- echo "ok"
+ echo "OK"
fi
test_rc
}
@@ -488,7 +553,7 @@ run_stringtests()
echo "FAIL" >&2
rc=1
else
- echo "ok"
+ echo "OK"
fi
echo -n "Writing middle of sysctl after unsynchronized seek ... "
@@ -498,7 +563,7 @@ run_stringtests()
echo "FAIL" >&2
rc=1
else
- echo "ok"
+ echo "OK"
fi
echo -n "Checking sysctl maxlen is at least $MAXLEN ... "
@@ -509,7 +574,7 @@ run_stringtests()
echo "FAIL" >&2
rc=1
else
- echo "ok"
+ echo "OK"
fi
echo -n "Checking sysctl keeps original string on overflow append ... "
@@ -520,7 +585,7 @@ run_stringtests()
echo "FAIL" >&2
rc=1
else
- echo "ok"
+ echo "OK"
fi
echo -n "Checking sysctl stays NULL terminated on write ... "
@@ -531,7 +596,7 @@ run_stringtests()
echo "FAIL" >&2
rc=1
else
- echo "ok"
+ echo "OK"
fi
echo -n "Checking sysctl stays NULL terminated on overwrite ... "
@@ -542,26 +607,87 @@ run_stringtests()
echo "FAIL" >&2
rc=1
else
- echo "ok"
+ echo "OK"
+ fi
+
+ test_rc
+}
+
+target_exists()
+{
+ TARGET="${SYSCTL}/$1"
+ TEST_ID="$2"
+
+ if [ ! -f ${TARGET} ] ; then
+ return 0
+ fi
+ return 1
+}
+
+run_bitmaptest() {
+ # Total length of bitmaps string to use, a bit under
+ # the maximum input size of the test node
+ LENGTH=$((RANDOM % 65000))
+
+ # First bit to set
+ BIT=$((RANDOM % 1024))
+
+ # String containing our list of bits to set
+ TEST_STR=$BIT
+
+ # build up the string
+ while [ "${#TEST_STR}" -le "$LENGTH" ]; do
+ # Make sure next entry is discontiguous,
+ # skip ahead at least 2
+ BIT=$((BIT + $((2 + RANDOM % 10))))
+
+ # Add new bit to the list
+ TEST_STR="${TEST_STR},${BIT}"
+
+ # Randomly make it a range
+ if [ "$((RANDOM % 2))" -eq "1" ]; then
+ RANGE_END=$((BIT + $((1 + RANDOM % 10))))
+ TEST_STR="${TEST_STR}-${RANGE_END}"
+ BIT=$RANGE_END
+ fi
+ done
+
+ echo -n "Checking bitmap handler ... "
+ TEST_FILE=$(mktemp)
+ echo -n "$TEST_STR" > $TEST_FILE
+
+ cat $TEST_FILE > $TARGET 2> /dev/null
+ if [ $? -ne 0 ]; then
+ echo "FAIL" >&2
+ rc=1
+ test_rc
fi
+ if ! verify_diff_proc_file "$TARGET" "$TEST_FILE"; then
+ echo "FAIL" >&2
+ rc=1
+ else
+ echo "OK"
+ rc=0
+ fi
test_rc
}
sysctl_test_0001()
{
- TARGET="${SYSCTL}/int_0001"
+ TARGET="${SYSCTL}/$(get_test_target 0001)"
reset_vals
ORIG=$(cat "${TARGET}")
TEST_STR=$(( $ORIG + 1 ))
run_numerictests
+ run_wideint_tests
run_limit_digit
}
sysctl_test_0002()
{
- TARGET="${SYSCTL}/string_0001"
+ TARGET="${SYSCTL}/$(get_test_target 0002)"
reset_vals
ORIG=$(cat "${TARGET}")
TEST_STR="Testing sysctl"
@@ -574,54 +700,208 @@ sysctl_test_0002()
sysctl_test_0003()
{
- TARGET="${SYSCTL}/int_0002"
+ TARGET="${SYSCTL}/$(get_test_target 0003)"
reset_vals
ORIG=$(cat "${TARGET}")
TEST_STR=$(( $ORIG + 1 ))
run_numerictests
+ run_wideint_tests
run_limit_digit
run_limit_digit_int
}
sysctl_test_0004()
{
- TARGET="${SYSCTL}/uint_0001"
+ TARGET="${SYSCTL}/$(get_test_target 0004)"
reset_vals
ORIG=$(cat "${TARGET}")
TEST_STR=$(( $ORIG + 1 ))
run_numerictests
+ run_wideint_tests
run_limit_digit
run_limit_digit_uint
}
sysctl_test_0005()
{
- TARGET="${SYSCTL}/int_0003"
+ TARGET="${SYSCTL}/$(get_test_target 0005)"
reset_vals
ORIG=$(cat "${TARGET}")
run_limit_digit_int_array
}
+sysctl_test_0006()
+{
+ TARGET="${SYSCTL}/$(get_test_target 0006)"
+ reset_vals
+ ORIG=""
+ run_bitmaptest
+}
+
+sysctl_test_0007()
+{
+ TARGET="${SYSCTL}/$(get_test_target 0007)"
+ echo -n "Testing if $TARGET is set to 1 ... "
+
+ if [ ! -f $TARGET ]; then
+ echo -e "SKIPPING\n$TARGET is not present"
+ return $ksft_skip
+ fi
+
+ if [ -d $DIR ]; then
+ echo -e "SKIPPING\nTest only possible if sysctl_test is built-in, not module:"
+ cat $TEST_DIR/config >&2
+ return $ksft_skip
+ fi
+
+ ORIG=$(cat "${TARGET}")
+
+ if [ x$ORIG = "x1" ]; then
+ echo "OK"
+ return 0
+ fi
+
+ if [ ! -f /proc/cmdline ]; then
+ echo -e "SKIPPING\nThere is no /proc/cmdline to check for parameter"
+ return $ksft_skip
+ fi
+
+ FOUND=$(grep -c "sysctl[./]debug[./]test_sysctl[./]boot_int=1" /proc/cmdline)
+ if [ $FOUND = "1" ]; then
+ echo -e "FAIL\nKernel param found but $TARGET is not 1." >&2
+ rc=1
+ test_rc
+ fi
+
+ echo -e "SKIPPING\nExpected kernel parameter missing."
+ echo "Kernel must be booted with parameter: sysctl.debug.test_sysctl.boot_int=1"
+ return $ksft_skip
+}
+
+sysctl_test_0008()
+{
+ TARGET="${SYSCTL}/$(get_test_target 0008)"
+ echo -n "Testing if $TARGET is matched in kernel ... "
+
+ if [ ! -f $TARGET ]; then
+ echo -e "SKIPPING\n$TARGET is not present"
+ return $ksft_skip
+ fi
+
+ ORIG_VALUE=$(cat "${TARGET}")
+
+ if [ $ORIG_VALUE -ne 1 ]; then
+ echo "FAIL" >&2
+ rc=1
+ test_rc
+ fi
+
+ echo "OK"
+ return 0
+}
+
+sysctl_test_0009()
+{
+ TARGET="${SYSCTL}/$(get_test_target 0009)"
+ echo -n "Testing if $TARGET unregistered correctly ... "
+ if [ -d $TARGET ]; then
+ echo "FAIL" >&2
+ rc=1
+ test_rc
+ fi
+
+ echo "OK"
+ return 0
+}
+
+sysctl_test_0010()
+{
+ TARGET="${SYSCTL}/$(get_test_target 0010)"
+ echo -n "Testing that $TARGET was not created ... "
+ if [ -d $TARGET ]; then
+ echo "FAIL" >&2
+ rc=1
+ test_rc
+ fi
+
+ echo "OK"
+ return 0
+}
+
+sysctl_test_0011()
+{
+ TARGET="${SYSCTL}/$(get_test_target 0011)"
+ echo -n "Testing empty dir handling in ${TARGET} ... "
+ if [ ! -d ${TARGET} ]; then
+ echo -e "FAIL\nCould not create ${TARGET}" >&2
+ rc=1
+ test_rc
+ fi
+
+ TARGET2="${TARGET}/empty"
+ if [ ! -d ${TARGET2} ]; then
+ echo -e "FAIL\nCould not create ${TARGET2}" >&2
+ rc=1
+ test_rc
+ fi
+
+ echo "OK"
+ return 0
+}
+
+sysctl_test_0012()
+{
+ TARGET="${SYSCTL}/$(get_test_target 0012)"
+ echo -n "Testing u8 range check in sysctl table check in ${TARGET} ... "
+ if [ ! -f ${TARGET} ]; then
+ echo -e "FAIL\nCould not create ${TARGET}" >&2
+ rc=1
+ test_rc
+ fi
+
+ local u8over_msg=$(dmesg | grep "u8_over range value" | wc -l)
+ if [ ! ${u8over_msg} -eq 1 ]; then
+ echo -e "FAIL\nu8 overflow not detected" >&2
+ rc=1
+ test_rc
+ fi
+
+ local u8under_msg=$(dmesg | grep "u8_under range value" | wc -l)
+ if [ ! ${u8under_msg} -eq 1 ]; then
+ echo -e "FAIL\nu8 underflow not detected" >&2
+ rc=1
+ test_rc
+ fi
+
+ echo "OK"
+ return 0
+}
+
list_tests()
{
echo "Test ID list:"
echo
echo "TEST_ID x NUM_TEST"
echo "TEST_ID: Test ID"
- echo "NUM_TESTS: Number of recommended times to run the test"
+ echo "NUM_TESTS: Recommended number of times to run the test"
echo
echo "0001 x $(get_test_count 0001) - tests proc_dointvec_minmax()"
echo "0002 x $(get_test_count 0002) - tests proc_dostring()"
echo "0003 x $(get_test_count 0003) - tests proc_dointvec()"
echo "0004 x $(get_test_count 0004) - tests proc_douintvec()"
echo "0005 x $(get_test_count 0005) - tests proc_douintvec() array"
+ echo "0006 x $(get_test_count 0006) - tests proc_do_large_bitmap()"
+ echo "0007 x $(get_test_count 0007) - tests setting sysctl from kernel boot param"
+ echo "0008 x $(get_test_count 0008) - tests sysctl macro values match"
+ echo "0009 x $(get_test_count 0009) - tests sysct unregister"
+ echo "0010 x $(get_test_count 0010) - tests sysct mount point"
+ echo "0011 x $(get_test_count 0011) - tests empty directories"
+ echo "0012 x $(get_test_count 0012) - tests range check for u8 proc_handler"
}
-test_reqs
-
usage()
{
NUM_TESTS=$(grep -o ' ' <<<"$ALL_TESTS" | grep -c .)
@@ -634,7 +914,7 @@ usage()
echo "Valid tests: 0001-$MAX_TEST"
echo ""
echo " all Runs all tests (default)"
- echo " -t Run test ID the number amount of times is recommended"
+ echo " -t Run test ID the recommended number of times"
echo " -w Watch test ID run until it runs into an error"
echo " -c Run test ID once"
echo " -s Run test ID x test-count number of times"
@@ -648,7 +928,7 @@ usage()
echo Example uses:
echo
echo "$TEST_NAME.sh -- executes all tests"
- echo "$TEST_NAME.sh -t 0002 -- Executes test ID 0002 number of times is recomended"
+ echo "$TEST_NAME.sh -t 0002 -- Executes test ID 0002 the recommended number of times"
echo "$TEST_NAME.sh -w 0002 -- Watch test ID 0002 run until an error occurs"
echo "$TEST_NAME.sh -s 0002 -- Run test ID 0002 once"
echo "$TEST_NAME.sh -c 0002 3 -- Run test ID 0002 three times"
@@ -664,30 +944,67 @@ function test_num()
usage
fi
}
+function remove_leading_zeros()
+{
+ echo $1 | sed 's/^0*//'
+}
function get_test_count()
{
test_num $1
- TEST_DATA=$(echo $ALL_TESTS | awk '{print $'$1'}')
- LAST_TWO=${TEST_DATA#*:*}
- echo ${LAST_TWO%:*}
+ awk_field=$(remove_leading_zeros $1)
+ TEST_DATA=$(echo $ALL_TESTS | awk '{print $'$awk_field'}')
+ echo ${TEST_DATA} | awk -F":" '{print $2}'
}
function get_test_enabled()
{
test_num $1
- TEST_DATA=$(echo $ALL_TESTS | awk '{print $'$1'}')
- echo ${TEST_DATA#*:*:}
+ awk_field=$(remove_leading_zeros $1)
+ TEST_DATA=$(echo $ALL_TESTS | awk '{print $'$awk_field'}')
+ echo ${TEST_DATA} | awk -F":" '{print $3}'
+}
+
+function get_test_target()
+{
+ test_num $1
+ awk_field=$(remove_leading_zeros $1)
+ TEST_DATA=$(echo $ALL_TESTS | awk '{print $'$awk_field'}')
+ echo ${TEST_DATA} | awk -F":" '{print $4}'
+}
+
+function get_test_skip_no_target()
+{
+ test_num $1
+ awk_field=$(remove_leading_zeros $1)
+ TEST_DATA=$(echo $ALL_TESTS | awk '{print $'$awk_field'}')
+ echo ${TEST_DATA} | awk -F":" '{print $5}'
+}
+
+function skip_test()
+{
+ TEST_ID=$1
+ TEST_TARGET=$2
+ if target_exists $TEST_TARGET $TEST_ID; then
+ TEST_SKIP=$(get_test_skip_no_target $TEST_ID)
+ if [[ $TEST_SKIP -eq "1" ]]; then
+ echo "Target $TEST_TARGET for test $TEST_ID does not exist ... SKIPPING"
+ return 0
+ fi
+ fi
+ return 1
}
function run_all_tests()
{
for i in $ALL_TESTS ; do
- TEST_ID=${i%:*:*}
+ TEST_ID=${i%:*:*:*:*}
ENABLED=$(get_test_enabled $TEST_ID)
TEST_COUNT=$(get_test_count $TEST_ID)
+ TEST_TARGET=$(get_test_target $TEST_ID)
+
if [[ $ENABLED -eq "1" ]]; then
- test_case $TEST_ID $TEST_COUNT
+ test_case $TEST_ID $TEST_COUNT $TEST_TARGET
fi
done
}
@@ -720,16 +1037,19 @@ function watch_case()
function test_case()
{
- NUM_TESTS=$DEFAULT_NUM_TESTS
- if [ $# -eq 2 ]; then
- NUM_TESTS=$2
+ TEST_ID=$1
+ NUM_TESTS=$2
+ TARGET=$3
+
+ if skip_test $TEST_ID $TARGET; then
+ return
fi
i=0
while [ $i -lt $NUM_TESTS ]; do
- test_num $1
- watch_log $i ${TEST_NAME}_test_$1 noclear
- RUN_TEST=${TEST_NAME}_test_$1
+ test_num $TEST_ID
+ watch_log $i ${TEST_NAME}_test_${TEST_ID} noclear
+ RUN_TEST=${TEST_NAME}_test_${TEST_ID}
$RUN_TEST
let i=$i+1
done
@@ -748,15 +1068,15 @@ function parse_args()
elif [[ "$1" = "-t" ]]; then
shift
test_num $1
- test_case $1 $(get_test_count $1)
+ test_case $1 $(get_test_count $1) $(get_test_target $1)
elif [[ "$1" = "-c" ]]; then
shift
test_num $1
test_num $2
- test_case $1 $2
+ test_case $1 $2 $(get_test_target $1)
elif [[ "$1" = "-s" ]]; then
shift
- test_case $1 1
+ test_case $1 1 $(get_test_target $1)
elif [[ "$1" = "-l" ]]; then
list_tests
elif [[ "$1" = "-h" || "$1" = "--help" ]]; then
@@ -770,7 +1090,6 @@ function parse_args()
test_reqs
allow_user_defaults
check_production_sysctl_writes_strict
-test_modprobe
load_req_mod
trap "test_finish" EXIT
generated by cgit (git 2.34.1) at 2025-12-25 08:50:50 +0000