diff options
Diffstat (limited to 'tools/tracing')
40 files changed, 4192 insertions, 2065 deletions
diff --git a/tools/tracing/latency/.gitignore b/tools/tracing/latency/.gitignore index 0863960761e7..2bb8e60f7fdd 100644 --- a/tools/tracing/latency/.gitignore +++ b/tools/tracing/latency/.gitignore @@ -1,2 +1,5 @@ -# SPDX-License-Identifier: GPL-2.0 +# SPDX-License-Identifier: GPL-2.0-only latency-collector +fixdep +feature +FEATURE-DUMP diff --git a/tools/tracing/latency/Build b/tools/tracing/latency/Build new file mode 100644 index 000000000000..0ce65ea72bf9 --- /dev/null +++ b/tools/tracing/latency/Build @@ -0,0 +1 @@ +latency-collector-y += latency-collector.o diff --git a/tools/tracing/latency/Makefile b/tools/tracing/latency/Makefile index 40c4ddaf8be1..257a56b1899f 100644 --- a/tools/tracing/latency/Makefile +++ b/tools/tracing/latency/Makefile @@ -1,24 +1,87 @@ -# SPDX-License-Identifier: GPL-2.0 -# Makefile for vm tools -# -VAR_CFLAGS := $(shell pkg-config --cflags libtracefs 2>/dev/null) -VAR_LDLIBS := $(shell pkg-config --libs libtracefs 2>/dev/null) +# SPDX-License-Identifier: GPL-2.0-only -TARGETS = latency-collector -CFLAGS = -Wall -Wextra -g -O2 $(VAR_CFLAGS) -LDFLAGS = -lpthread $(VAR_LDLIBS) +ifeq ($(srctree),) + srctree := $(patsubst %/,%,$(dir $(CURDIR))) + srctree := $(patsubst %/,%,$(dir $(srctree))) + srctree := $(patsubst %/,%,$(dir $(srctree))) +endif -all: $(TARGETS) +include $(srctree)/tools/scripts/Makefile.include -%: %.c - $(CC) $(CFLAGS) -o $@ $< $(LDFLAGS) +# O is an alias for OUTPUT +OUTPUT := $(O) -clean: - $(RM) latency-collector +ifeq ($(OUTPUT),) + OUTPUT := $(CURDIR) +else + # subdir is used by the ../Makefile in $(call descend,) + ifneq ($(subdir),) + OUTPUT := $(OUTPUT)/$(subdir) + endif +endif + +ifneq ($(patsubst %/,,$(lastword $(OUTPUT))),) + OUTPUT := $(OUTPUT)/ +endif + +LATENCY-COLLECTOR := $(OUTPUT)latency-collector +LATENCY-COLLECTOR_IN := $(LATENCY-COLLECTOR)-in.o + +export CC := gcc +export LD := ld +export AR := ar +export PKG_CONFIG := pkg-config + +FEATURE_TESTS := libtraceevent +FEATURE_TESTS += libtracefs +FEATURE_DISPLAY := libtraceevent +FEATURE_DISPLAY += libtracefs + +all: $(LATENCY-COLLECTOR) + +include $(srctree)/tools/build/Makefile.include + +# check for dependencies only on required targets +NON_CONFIG_TARGETS := clean install + +config := 1 +ifdef MAKECMDGOALS +ifeq ($(filter-out $(NON_CONFIG_TARGETS),$(MAKECMDGOALS)),) + config := 0 +endif +endif -prefix ?= /usr/local -sbindir ?= ${prefix}/sbin +ifeq ($(config),1) + include $(srctree)/tools/build/Makefile.feature + include Makefile.config +endif -install: all - install -d $(DESTDIR)$(sbindir) - install -m 755 -p $(TARGETS) $(DESTDIR)$(sbindir) +CFLAGS += $(INCLUDES) $(LIB_INCLUDES) + +export CFLAGS OUTPUT srctree + +$(LATENCY-COLLECTOR): $(LATENCY-COLLECTOR_IN) + $(QUIET_LINK)$(CC) $(LDFLAGS) -o $(LATENCY-COLLECTOR) $(LATENCY-COLLECTOR_IN) $(EXTLIBS) + +latency-collector.%: fixdep FORCE + make -f $(srctree)/tools/build/Makefile.build dir=. $@ + +$(LATENCY-COLLECTOR_IN): fixdep FORCE + make $(build)=latency-collector + +INSTALL := install +MKDIR := mkdir +STRIP := strip +BINDIR := /usr/bin + +install: + @$(MKDIR) -p $(DESTDIR)$(BINDIR) + $(call QUIET_INSTALL,latency-collector)$(INSTALL) $(LATENCY-COLLECTOR) -m 755 $(DESTDIR)$(BINDIR) + @$(STRIP) $(DESTDIR)$(BINDIR)/latency-collector + +clean: + $(call QUIET_CLEAN, latency-collector) + $(Q)find . -name '*.o' -delete -o -name '\.*.cmd' -delete -o -name '\.*.d' -delete + $(Q)@rm -f latency-collector fixdep FEATURE-DUMP + $(Q)rm -rf feature +.PHONY: FORCE clean install diff --git a/tools/tracing/latency/Makefile.config b/tools/tracing/latency/Makefile.config new file mode 100644 index 000000000000..6efa13e3ca93 --- /dev/null +++ b/tools/tracing/latency/Makefile.config @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0-only + +include $(srctree)/tools/scripts/utilities.mak + +STOP_ERROR := + +ifndef ($(NO_LIBTRACEEVENT),1) + ifeq ($(call get-executable,$(PKG_CONFIG)),) + $(error Error: $(PKG_CONFIG) needed by libtraceevent/libtracefs is missing on this system, please install it) + endif +endif + +define lib_setup + $(eval LIB_INCLUDES += $(shell sh -c "$(PKG_CONFIG) --cflags lib$(1)")) + $(eval LDFLAGS += $(shell sh -c "$(PKG_CONFIG) --libs-only-L lib$(1)")) + $(eval EXTLIBS += $(shell sh -c "$(PKG_CONFIG) --libs-only-l lib$(1)")) +endef + +$(call feature_check,libtraceevent) +ifeq ($(feature-libtraceevent), 1) + $(call detected,CONFIG_LIBTRACEEVENT) + $(call lib_setup,traceevent) +else + STOP_ERROR := 1 + $(info libtraceevent is missing. Please install libtraceevent-dev/libtraceevent-devel) +endif + +$(call feature_check,libtracefs) +ifeq ($(feature-libtracefs), 1) + $(call detected,CONFIG_LIBTRACEFS) + $(call lib_setup,tracefs) +else + STOP_ERROR := 1 + $(info libtracefs is missing. Please install libtracefs-dev/libtracefs-devel) +endif + +ifeq ($(STOP_ERROR),1) + $(error Please, check the errors above.) +endif diff --git a/tools/tracing/latency/latency-collector.c b/tools/tracing/latency/latency-collector.c index 0fd9c747d396..ef97916e3873 100644 --- a/tools/tracing/latency/latency-collector.c +++ b/tools/tracing/latency/latency-collector.c @@ -935,12 +935,12 @@ static void show_available(void) } if (!tracers) { - warnx(no_tracer_msg); + warnx("%s", no_tracer_msg); return; } if (!found) { - warnx(no_latency_tr_msg); + warnx("%s", no_latency_tr_msg); tracefs_list_free(tracers); return; } @@ -983,7 +983,7 @@ static const char *find_default_tracer(void) for (i = 0; relevant_tracers[i]; i++) { valid = tracer_valid(relevant_tracers[i], ¬racer); if (notracer) - errx(EXIT_FAILURE, no_tracer_msg); + errx(EXIT_FAILURE, "%s", no_tracer_msg); if (valid) return relevant_tracers[i]; } @@ -1725,7 +1725,7 @@ static void show_usage(void) "-n, --notrace\t\tIf latency is detected, do not print out the content of\n" "\t\t\tthe trace file to standard output\n\n" -"-t, --threads NRTHR\tRun NRTHR threads for printing. Default is %d.\n\n" +"-e, --threads NRTHR\tRun NRTHR threads for printing. Default is %d.\n\n" "-r, --random\t\tArbitrarily sleep a certain amount of time, default\n" "\t\t\t%ld ms, before reading the trace file. The\n" @@ -1878,7 +1878,7 @@ static void scan_arguments(int argc, char *argv[]) } valid = tracer_valid(current_tracer, ¬racer); if (notracer) - errx(EXIT_FAILURE, no_tracer_msg); + errx(EXIT_FAILURE, "%s", no_tracer_msg); if (!valid) errx(EXIT_FAILURE, "The tracer %s is not supported by your kernel!\n", current_tracer); diff --git a/tools/tracing/rtla/.gitignore b/tools/tracing/rtla/.gitignore index e9df32419b2b..1a394ad26cc1 100644 --- a/tools/tracing/rtla/.gitignore +++ b/tools/tracing/rtla/.gitignore @@ -1 +1,7 @@ -/rtla +# SPDX-License-Identifier: GPL-2.0-only +rtla +rtla-static +fixdep +feature +FEATURE-DUMP +*.skel.h diff --git a/tools/tracing/rtla/Build b/tools/tracing/rtla/Build new file mode 100644 index 000000000000..6c9d5b36a315 --- /dev/null +++ b/tools/tracing/rtla/Build @@ -0,0 +1 @@ +rtla-y += src/ diff --git a/tools/tracing/rtla/Makefile b/tools/tracing/rtla/Makefile index 2456a399eb9a..746ccf2f5808 100644 --- a/tools/tracing/rtla/Makefile +++ b/tools/tracing/rtla/Makefile @@ -1,152 +1,102 @@ -NAME := rtla -# Follow the kernel version -VERSION := $(shell cat VERSION 2> /dev/null || make -sC ../../.. kernelversion | grep -v make) - -# From libtracefs: -# Makefiles suck: This macro sets a default value of $(2) for the -# variable named by $(1), unless the variable has been set by -# environment or command line. This is necessary for CC and AR -# because make sets default values, so the simpler ?= approach -# won't work as expected. -define allow-override - $(if $(or $(findstring environment,$(origin $(1))),\ - $(findstring command line,$(origin $(1)))),,\ - $(eval $(1) = $(2))) -endef - -# Allow setting CC and AR, or setting CROSS_COMPILE as a prefix. -$(call allow-override,CC,$(CROSS_COMPILE)gcc) -$(call allow-override,AR,$(CROSS_COMPILE)ar) -$(call allow-override,STRIP,$(CROSS_COMPILE)strip) -$(call allow-override,PKG_CONFIG,pkg-config) -$(call allow-override,LD_SO_CONF_PATH,/etc/ld.so.conf.d/) -$(call allow-override,LDCONFIG,ldconfig) - -INSTALL = install -MKDIR = mkdir -FOPTS := -flto=auto -ffat-lto-objects -fexceptions -fstack-protector-strong \ - -fasynchronous-unwind-tables -fstack-clash-protection -WOPTS := -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -Wno-maybe-uninitialized - -TRACEFS_HEADERS := $$($(PKG_CONFIG) --cflags libtracefs) - -CFLAGS := -O -g -DVERSION=\"$(VERSION)\" $(FOPTS) $(MOPTS) $(WOPTS) $(TRACEFS_HEADERS) $(EXTRA_CFLAGS) -LDFLAGS := -ggdb $(EXTRA_LDFLAGS) -LIBS := $$($(PKG_CONFIG) --libs libtracefs) - -SRC := $(wildcard src/*.c) -HDR := $(wildcard src/*.h) -OBJ := $(SRC:.c=.o) -DIRS := src -FILES := Makefile README.txt -CEXT := bz2 -TARBALL := $(NAME)-$(VERSION).tar.$(CEXT) -TAROPTS := -cvjf $(TARBALL) -BINDIR := /usr/bin -DATADIR := /usr/share -DOCDIR := $(DATADIR)/doc -MANDIR := $(DATADIR)/man -LICDIR := $(DATADIR)/licenses -SRCTREE := $(or $(BUILD_SRC),$(CURDIR)) - -# If running from the tarball, man pages are stored in the Documentation -# dir. If running from the kernel source, man pages are stored in -# Documentation/tools/rtla/. -ifneq ($(wildcard Documentation/.*),) -DOCSRC = Documentation/ -else -DOCSRC = $(SRCTREE)/../../../Documentation/tools/rtla/ +# SPDX-License-Identifier: GPL-2.0-only + +ifeq ($(srctree),) + srctree := $(patsubst %/,%,$(dir $(CURDIR))) + srctree := $(patsubst %/,%,$(dir $(srctree))) + srctree := $(patsubst %/,%,$(dir $(srctree))) endif -LIBTRACEEVENT_MIN_VERSION = 1.5 -LIBTRACEFS_MIN_VERSION = 1.3 +include $(srctree)/tools/scripts/Makefile.include + +# O is an alias for OUTPUT +OUTPUT := $(O) + +ifeq ($(OUTPUT),) + OUTPUT := $(CURDIR) +else + # subdir is used by the ../Makefile in $(call descend,) + ifneq ($(subdir),) + OUTPUT := $(OUTPUT)/$(subdir) + endif +endif -.PHONY: all warnings show_warnings -all: warnings rtla +ifneq ($(patsubst %/,,$(lastword $(OUTPUT))),) + OUTPUT := $(OUTPUT)/ +endif -TEST_LIBTRACEEVENT = $(shell sh -c "$(PKG_CONFIG) --atleast-version $(LIBTRACEEVENT_MIN_VERSION) libtraceevent > /dev/null 2>&1 || echo n") -ifeq ("$(TEST_LIBTRACEEVENT)", "n") -WARNINGS = show_warnings -MISSING_LIBS += echo "** libtraceevent version $(LIBTRACEEVENT_MIN_VERSION) or higher"; -MISSING_PACKAGES += "libtraceevent-devel" -MISSING_SOURCE += echo "** https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/ "; +RTLA := $(OUTPUT)rtla +RTLA_IN := $(RTLA)-in.o + +VERSION := $(shell sh -c "make -sC ../../.. kernelversion | grep -v make") +DOCSRC := ../../../Documentation/tools/rtla/ + +FEATURE_TESTS := libtraceevent +FEATURE_TESTS += libtracefs +FEATURE_TESTS += libcpupower +FEATURE_TESTS += libbpf +FEATURE_TESTS += clang-bpf-co-re +FEATURE_TESTS += bpftool-skeletons +FEATURE_DISPLAY := libtraceevent +FEATURE_DISPLAY += libtracefs +FEATURE_DISPLAY += libcpupower +FEATURE_DISPLAY += libbpf +FEATURE_DISPLAY += clang-bpf-co-re +FEATURE_DISPLAY += bpftool-skeletons + +all: $(RTLA) + +include $(srctree)/tools/build/Makefile.include +include Makefile.rtla + +# check for dependencies only on required targets +NON_CONFIG_TARGETS := clean install tarball doc doc_clean doc_install + +config := 1 +ifdef MAKECMDGOALS +ifeq ($(filter-out $(NON_CONFIG_TARGETS),$(MAKECMDGOALS)),) + config := 0 +endif endif -TEST_LIBTRACEFS = $(shell sh -c "$(PKG_CONFIG) --atleast-version $(LIBTRACEFS_MIN_VERSION) libtracefs > /dev/null 2>&1 || echo n") -ifeq ("$(TEST_LIBTRACEFS)", "n") -WARNINGS = show_warnings -MISSING_LIBS += echo "** libtracefs version $(LIBTRACEFS_MIN_VERSION) or higher"; -MISSING_PACKAGES += "libtracefs-devel" -MISSING_SOURCE += echo "** https://git.kernel.org/pub/scm/libs/libtrace/libtracefs.git/ "; +ifeq ($(config),1) + include $(srctree)/tools/build/Makefile.feature + include Makefile.config endif -define show_dependencies - @echo "********************************************"; \ - echo "** NOTICE: Failed build dependencies"; \ - echo "**"; \ - echo "** Required Libraries:"; \ - $(MISSING_LIBS) \ - echo "**"; \ - echo "** Consider installing the latest libtracefs from your"; \ - echo "** distribution, e.g., 'dnf install $(MISSING_PACKAGES)' on Fedora,"; \ - echo "** or from source:"; \ - echo "**"; \ - $(MISSING_SOURCE) \ - echo "**"; \ - echo "********************************************" -endef - -show_warnings: - $(call show_dependencies); - -ifneq ("$(WARNINGS)", "") -ERROR_OUT = $(error Please add the necessary dependencies) - -warnings: $(WARNINGS) - $(ERROR_OUT) +CFLAGS += $(INCLUDES) $(LIB_INCLUDES) + +export CFLAGS OUTPUT srctree + +ifeq ($(BUILD_BPF_SKEL),1) +src/timerlat.bpf.o: src/timerlat.bpf.c + $(QUIET_CLANG)$(CLANG) -g -O2 -target bpf -c $(filter %.c,$^) -o $@ + +src/timerlat.skel.h: src/timerlat.bpf.o + $(QUIET_GENSKEL)$(SYSTEM_BPFTOOL) gen skeleton $< > $@ +else +src/timerlat.skel.h: + $(Q)echo '/* BPF skeleton is disabled */' > src/timerlat.skel.h endif -rtla: $(OBJ) - $(CC) -o rtla $(LDFLAGS) $(OBJ) $(LIBS) - -static: $(OBJ) - $(CC) -o rtla-static $(LDFLAGS) --static $(OBJ) $(LIBS) -lpthread -ldl - -.PHONY: install -install: doc_install - $(MKDIR) -p $(DESTDIR)$(BINDIR) - $(INSTALL) rtla -m 755 $(DESTDIR)$(BINDIR) - $(STRIP) $(DESTDIR)$(BINDIR)/rtla - @test ! -f $(DESTDIR)$(BINDIR)/osnoise || rm $(DESTDIR)$(BINDIR)/osnoise - ln -s rtla $(DESTDIR)$(BINDIR)/osnoise - @test ! -f $(DESTDIR)$(BINDIR)/hwnoise || rm $(DESTDIR)$(BINDIR)/hwnoise - ln -s rtla $(DESTDIR)$(BINDIR)/hwnoise - @test ! -f $(DESTDIR)$(BINDIR)/timerlat || rm $(DESTDIR)$(BINDIR)/timerlat - ln -s rtla $(DESTDIR)$(BINDIR)/timerlat - -.PHONY: clean tarball -clean: doc_clean - @test ! -f rtla || rm rtla - @test ! -f rtla-static || rm rtla-static - @test ! -f src/rtla.o || rm src/rtla.o - @test ! -f $(TARBALL) || rm -f $(TARBALL) - @rm -rf *~ $(OBJ) *.tar.$(CEXT) - -tarball: clean - rm -rf $(NAME)-$(VERSION) && mkdir $(NAME)-$(VERSION) - echo $(VERSION) > $(NAME)-$(VERSION)/VERSION - cp -r $(DIRS) $(FILES) $(NAME)-$(VERSION) - mkdir $(NAME)-$(VERSION)/Documentation/ - cp -rp $(SRCTREE)/../../../Documentation/tools/rtla/* $(NAME)-$(VERSION)/Documentation/ - tar $(TAROPTS) --exclude='*~' $(NAME)-$(VERSION) - rm -rf $(NAME)-$(VERSION) - -.PHONY: doc doc_clean doc_install -doc: - $(MAKE) -C $(DOCSRC) - -doc_clean: - $(MAKE) -C $(DOCSRC) clean - -doc_install: - $(MAKE) -C $(DOCSRC) install +$(RTLA): $(RTLA_IN) + $(QUIET_LINK)$(CC) $(LDFLAGS) -o $(RTLA) $(RTLA_IN) $(EXTLIBS) + +static: $(RTLA_IN) + $(eval LDFLAGS += -static) + $(QUIET_LINK)$(CC) -static $(LDFLAGS) -o $(RTLA)-static $(RTLA_IN) $(EXTLIBS) + +rtla.%: fixdep FORCE + make -f $(srctree)/tools/build/Makefile.build dir=. $@ + +$(RTLA_IN): fixdep FORCE src/timerlat.skel.h + make $(build)=rtla + +clean: doc_clean fixdep-clean + $(call QUIET_CLEAN, rtla) + $(Q)find . -name '*.o' -delete -o -name '\.*.cmd' -delete -o -name '\.*.d' -delete + $(Q)rm -f rtla rtla-static fixdep FEATURE-DUMP rtla-* + $(Q)rm -rf feature + $(Q)rm -f src/timerlat.bpf.o src/timerlat.skel.h +check: $(RTLA) + RTLA=$(RTLA) prove -o -f tests/ +.PHONY: FORCE clean check diff --git a/tools/tracing/rtla/Makefile.config b/tools/tracing/rtla/Makefile.config new file mode 100644 index 000000000000..07ff5e8f3006 --- /dev/null +++ b/tools/tracing/rtla/Makefile.config @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: GPL-2.0-only + +include $(srctree)/tools/scripts/utilities.mak + +STOP_ERROR := + +LIBTRACEEVENT_MIN_VERSION = 1.5 +LIBTRACEFS_MIN_VERSION = 1.6 + +ifndef ($(NO_LIBTRACEEVENT),1) + ifeq ($(call get-executable,$(PKG_CONFIG)),) + $(error Error: $(PKG_CONFIG) needed by libtraceevent/libtracefs is missing on this system, please install it) + endif +endif + +define lib_setup + $(eval LIB_INCLUDES += $(shell sh -c "$(PKG_CONFIG) --cflags lib$(1)")) + $(eval LDFLAGS += $(shell sh -c "$(PKG_CONFIG) --libs-only-L lib$(1)")) + $(eval EXTLIBS += $(shell sh -c "$(PKG_CONFIG) --libs-only-l lib$(1)")) +endef + +$(call feature_check,libtraceevent) +ifeq ($(feature-libtraceevent), 1) + $(call detected,CONFIG_LIBTRACEEVENT) + + TEST = $(shell sh -c "$(PKG_CONFIG) --atleast-version $(LIBTRACEEVENT_MIN_VERSION) libtraceevent > /dev/null 2>&1 && echo y || echo n") + ifeq ($(TEST),n) + $(info libtraceevent version is too low, it must be at least $(LIBTRACEEVENT_MIN_VERSION)) + STOP_ERROR := 1 + endif + + $(call lib_setup,traceevent) +else + STOP_ERROR := 1 + $(info libtraceevent is missing. Please install libtraceevent-dev/libtraceevent-devel) +endif + +$(call feature_check,libtracefs) +ifeq ($(feature-libtracefs), 1) + $(call detected,CONFIG_LIBTRACEFS) + + TEST = $(shell sh -c "$(PKG_CONFIG) --atleast-version $(LIBTRACEFS_MIN_VERSION) libtracefs > /dev/null 2>&1 && echo y || echo n") + ifeq ($(TEST),n) + $(info libtracefs version is too low, it must be at least $(LIBTRACEFS_MIN_VERSION)) + STOP_ERROR := 1 + endif + + $(call lib_setup,tracefs) +else + STOP_ERROR := 1 + $(info libtracefs is missing. Please install libtracefs-dev/libtracefs-devel) +endif + +$(call feature_check,libcpupower) +ifeq ($(feature-libcpupower), 1) + $(call detected,CONFIG_LIBCPUPOWER) + CFLAGS += -DHAVE_LIBCPUPOWER_SUPPORT + EXTLIBS += -lcpupower +else + $(info libcpupower is missing, building without --deepest-idle-state support.) + $(info Please install libcpupower-dev/kernel-tools-libs-devel) +endif + +ifndef BUILD_BPF_SKEL + # BPF skeletons are used to implement improved sample collection, enable + # them by default. + BUILD_BPF_SKEL := 1 +endif + +ifeq ($(BUILD_BPF_SKEL),0) + $(info BPF skeleton support disabled, building without BPF skeleton support.) +endif + +$(call feature_check,libbpf) +ifeq ($(feature-libbpf), 1) + $(call detected,CONFIG_LIBBPF) +else + $(info libbpf is missing, building without BPF skeleton support.) + $(info Please install libbpf-dev/libbpf-devel) + BUILD_BPF_SKEL := 0 +endif + +$(call feature_check,clang-bpf-co-re) +ifeq ($(feature-clang-bpf-co-re), 1) + $(call detected,CONFIG_CLANG_BPF_CO_RE) +else + $(info clang is missing or does not support BPF CO-RE, building without BPF skeleton support.) + $(info Please install clang) + BUILD_BPF_SKEL := 0 +endif + +$(call feature_check,bpftool-skeletons) +ifeq ($(feature-bpftool-skeletons), 1) + $(call detected,CONFIG_BPFTOOL_SKELETONS) +else + $(info bpftool is missing or not supporting skeletons, building without BPF skeleton support.) + $(info Please install bpftool) + BUILD_BPF_SKEL := 0 +endif + +ifeq ($(BUILD_BPF_SKEL),1) + CFLAGS += -DHAVE_BPF_SKEL + EXTLIBS += -lbpf +endif + +ifeq ($(STOP_ERROR),1) + $(error Please, check the errors above.) +endif diff --git a/tools/tracing/rtla/Makefile.rtla b/tools/tracing/rtla/Makefile.rtla new file mode 100644 index 000000000000..1743d91829d4 --- /dev/null +++ b/tools/tracing/rtla/Makefile.rtla @@ -0,0 +1,93 @@ +# SPDX-License-Identifier: GPL-2.0-only + +define allow-override + $(if $(or $(findstring environment,$(origin $(1))),\ + $(findstring command line,$(origin $(1)))),,\ + $(eval $(1) = $(2))) +endef + +# Allow setting CC and AR, or setting CROSS_COMPILE as a prefix. +$(call allow-override,CC,$(CROSS_COMPILE)gcc) +$(call allow-override,AR,$(CROSS_COMPILE)ar) +$(call allow-override,STRIP,$(CROSS_COMPILE)strip) +$(call allow-override,PKG_CONFIG,pkg-config) +$(call allow-override,LD_SO_CONF_PATH,/etc/ld.so.conf.d/) +$(call allow-override,LDCONFIG,ldconfig) +export CC AR STRIP PKG_CONFIG LD_SO_CONF_PATH LDCONFIG + +FOPTS := -flto=auto -ffat-lto-objects -fexceptions -fstack-protector-strong \ + -fasynchronous-unwind-tables -fstack-clash-protection +WOPTS := -O -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 \ + -Wp,-D_GLIBCXX_ASSERTIONS + +ifeq ($(CC),clang) + FOPTS := $(filter-out -flto=auto -ffat-lto-objects, $(FOPTS)) + WOPTS := $(filter-out -Wno-maybe-uninitialized, $(WOPTS)) +endif + +CFLAGS := -g -DVERSION=\"$(VERSION)\" $(FOPTS) $(WOPTS) $(CFLAGS) +LDFLAGS := -ggdb $(LDFLAGS) + +RM := rm -rf +LN := ln -s +INSTALL := install +MKDIR := mkdir +STRIP := strip +BINDIR := /usr/bin +CTAGS := ctags +ETAGS := ctags -e + +.PHONY: install +install: doc_install + @$(MKDIR) -p $(DESTDIR)$(BINDIR) + $(call QUIET_INSTALL,rtla)$(INSTALL) $(RTLA) -m 755 $(DESTDIR)$(BINDIR) + @$(STRIP) $(DESTDIR)$(BINDIR)/rtla + @test ! -f $(DESTDIR)$(BINDIR)/osnoise || $(RM) $(DESTDIR)$(BINDIR)/osnoise + @$(LN) rtla $(DESTDIR)$(BINDIR)/osnoise + @test ! -f $(DESTDIR)$(BINDIR)/hwnoise || $(RM) $(DESTDIR)$(BINDIR)/hwnoise + @$(LN) -s rtla $(DESTDIR)$(BINDIR)/hwnoise + @test ! -f $(DESTDIR)$(BINDIR)/timerlat || $(RM) $(DESTDIR)$(BINDIR)/timerlat + @$(LN) -s rtla $(DESTDIR)$(BINDIR)/timerlat + +.PHONY: tags +tags: + $(CTAGS) -R --extras=+f --c-kinds=+p src + +.PHONY: TAGS +TAGS: + $(ETAGS) -R --extras=+f --c-kinds=+p src + +.PHONY: tags_clean +tags_clean: + $(RM) tags TAGS + +.PHONY: doc doc_clean doc_install +doc: + $(MAKE) -C $(DOCSRC) + +doc_clean: + $(MAKE) -C $(DOCSRC) clean + +doc_install: + $(MAKE) -C $(DOCSRC) install + +# This section is necessary to make the rtla tarball +NAME := rtla +DIRS := src +FILES := Makefile README.txt +CEXT := bz2 +TARBALL := $(NAME)-$(VERSION).tar.$(CEXT) +TAROPTS := -cvjf $(TARBALL) +SRCTREE := $(or $(BUILD_SRC),$(CURDIR)) + +tarball: clean + $(RM) $(NAME)-$(VERSION) && $(MKDIR) $(NAME)-$(VERSION) + echo $(VERSION) > $(NAME)-$(VERSION)/VERSION + cp -r $(DIRS) $(FILES) $(NAME)-$(VERSION) + $(MKDIR) $(NAME)-$(VERSION)/Documentation/ + cp -rp $(SRCTREE)/../../../Documentation/tools/$(NAME)/* $(NAME)-$(VERSION)/Documentation/ + cp Makefile.standalone $(NAME)-$(VERSION)/Makefile + cp Makefile.$(NAME) $(NAME)-$(VERSION)/ + tar $(TAROPTS) --exclude='*~' $(NAME)-$(VERSION) + $(RM) $(NAME)-$(VERSION) +.PHONY: tarball diff --git a/tools/tracing/rtla/Makefile.standalone b/tools/tracing/rtla/Makefile.standalone new file mode 100644 index 000000000000..86d07cb52fa5 --- /dev/null +++ b/tools/tracing/rtla/Makefile.standalone @@ -0,0 +1,26 @@ +# SPDX-License-Identifier: GPL-2.0-only + +VERSION := $(shell cat VERSION) +CFLAGS += $$($(PKG_CONFIG) --cflags libtracefs) +EXTLIBS += $$($(PKG_CONFIG) --libs libtracefs) + +rtla: + +include Makefile.rtla + +SRC := $(wildcard src/*.c) +HDR := $(wildcard src/*.h) +OBJ := $(SRC:.c=.o) +DOCSRC := Documentation/ + +rtla: $(OBJ) + $(CC) -o rtla $(LDFLAGS) $(OBJ) $(LIBS) $(EXTLIBS) + $(info This is a deprecated method to compile RTLA, please compile from Linux kernel source) + +.PHONY: clean tarball +clean: doc_clean + @test ! -f rtla || rm rtla + @test ! -f rtla-static || rm rtla-static + @test ! -f src/rtla.o || rm src/rtla.o + @test ! -f $(TARBALL) || rm -f $(TARBALL) + @rm -rf *~ $(OBJ) *.tar.$(CEXT) diff --git a/tools/tracing/rtla/README.txt b/tools/tracing/rtla/README.txt index 4af3fd40f171..43e98311d10f 100644 --- a/tools/tracing/rtla/README.txt +++ b/tools/tracing/rtla/README.txt @@ -11,6 +11,14 @@ RTLA depends on the following libraries and tools: - libtracefs - libtraceevent + - libcpupower (optional, for --deepest-idle-state) + +For BPF sample collection support, the following extra dependencies are +required: + + - libbpf 1.0.0 or later + - bpftool with skeleton support + - clang with BPF CO-RE support It also depends on python3-docutils to compile man pages. @@ -26,6 +34,9 @@ For development, we suggest the following steps for compiling rtla: $ make $ sudo make install $ cd .. + $ cd $libcpupower_src + $ make + $ sudo make install $ cd $rtla_src $ make $ sudo make install diff --git a/tools/tracing/rtla/sample/timerlat_load.py b/tools/tracing/rtla/sample/timerlat_load.py new file mode 100644 index 000000000000..a819c3588073 --- /dev/null +++ b/tools/tracing/rtla/sample/timerlat_load.py @@ -0,0 +1,78 @@ +#!/usr/bin/env python3 +# SPDX-License-Identifier: GPL-2.0-only +# +# Copyright (C) 2024 Red Hat, Inc. Daniel Bristot de Oliveira <bristot@kernel.org> +# +# This is a sample code about how to use timerlat's timer by any workload +# so rtla can measure and provide auto-analysis for the overall latency (IOW +# the response time) for a task. +# +# Before running it, you need to dispatch timerlat with -U option in a terminal. +# Then # run this script pinned to a CPU on another terminal. For example: +# +# timerlat_load.py 1 -p 95 +# +# The "Timerlat IRQ" is the IRQ latency, The thread latency is the latency +# for the python process to get the CPU. The Ret from user Timer Latency is +# the overall latency. In other words, it is the response time for that +# activation. +# +# This is just an example, the load is reading 20MB of data from /dev/full +# It is in python because it is easy to read :-) + +import argparse +import sys +import os + +parser = argparse.ArgumentParser(description='user-space timerlat thread in Python') +parser.add_argument("cpu", type=int, help='CPU to run timerlat thread') +parser.add_argument("-p", "--prio", type=int, help='FIFO priority') +args = parser.parse_args() + +try: + affinity_mask = {args.cpu} + os.sched_setaffinity(0, affinity_mask) +except Exception as e: + print(f"Error setting affinity: {e}") + sys.exit(1) + +if args.prio: + try: + param = os.sched_param(args.prio) + os.sched_setscheduler(0, os.SCHED_FIFO, param) + except Exception as e: + print(f"Error setting priority: {e}") + sys.exit(1) + +try: + timerlat_path = f"/sys/kernel/tracing/osnoise/per_cpu/cpu{args.cpu}/timerlat_fd" + timerlat_fd = open(timerlat_path, 'r') +except PermissionError: + print("Permission denied. Please check your access rights.") + sys.exit(1) +except OSError: + print("Error opening timerlat fd, did you run timerlat -U?") + sys.exit(1) + +try: + data_fd = open("/dev/full", 'r') +except Exception as e: + print(f"Error opening data fd: {e}") + sys.exit(1) + +while True: + try: + timerlat_fd.read(1) + data_fd.read(20 * 1024 * 1024) + except KeyboardInterrupt: + print("Leaving") + break + except IOError as e: + print(f"I/O error occurred: {e}") + break + except Exception as e: + print(f"Unexpected error: {e}") + break + +timerlat_fd.close() +data_fd.close() diff --git a/tools/tracing/rtla/src/Build b/tools/tracing/rtla/src/Build new file mode 100644 index 000000000000..329e24a40cf7 --- /dev/null +++ b/tools/tracing/rtla/src/Build @@ -0,0 +1,14 @@ +rtla-y += trace.o +rtla-y += utils.o +rtla-y += actions.o +rtla-y += common.o +rtla-y += osnoise.o +rtla-y += osnoise_top.o +rtla-y += osnoise_hist.o +rtla-y += timerlat.o +rtla-y += timerlat_top.o +rtla-y += timerlat_hist.o +rtla-y += timerlat_u.o +rtla-y += timerlat_aa.o +rtla-y += timerlat_bpf.o +rtla-y += rtla.o diff --git a/tools/tracing/rtla/src/actions.c b/tools/tracing/rtla/src/actions.c new file mode 100644 index 000000000000..8945aee58d51 --- /dev/null +++ b/tools/tracing/rtla/src/actions.c @@ -0,0 +1,260 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <stdlib.h> +#include <string.h> +#include <signal.h> +#include <unistd.h> + +#include "actions.h" +#include "trace.h" +#include "utils.h" + +/* + * actions_init - initialize struct actions + */ +void +actions_init(struct actions *self) +{ + self->size = action_default_size; + self->list = calloc(self->size, sizeof(struct action)); + self->len = 0; + self->continue_flag = false; + + memset(&self->present, 0, sizeof(self->present)); + + /* This has to be set by the user */ + self->trace_output_inst = NULL; +} + +/* + * actions_destroy - destroy struct actions + */ +void +actions_destroy(struct actions *self) +{ + /* Free any action-specific data */ + for (struct action *action = self->list; action < self->list + self->len; action++) { + if (action->type == ACTION_SHELL) + free(action->command); + if (action->type == ACTION_TRACE_OUTPUT) + free(action->trace_output); + } + + /* Free action list */ + free(self->list); +} + +/* + * actions_new - Get pointer to new action + */ +static struct action * +actions_new(struct actions *self) +{ + if (self->len >= self->size) { + self->size *= 2; + self->list = realloc(self->list, self->size * sizeof(struct action)); + } + + return &self->list[self->len++]; +} + +/* + * actions_add_trace_output - add an action to output trace + */ +int +actions_add_trace_output(struct actions *self, const char *trace_output) +{ + struct action *action = actions_new(self); + + self->present[ACTION_TRACE_OUTPUT] = true; + action->type = ACTION_TRACE_OUTPUT; + action->trace_output = calloc(strlen(trace_output) + 1, sizeof(char)); + if (!action->trace_output) + return -1; + strcpy(action->trace_output, trace_output); + + return 0; +} + +/* + * actions_add_trace_output - add an action to send signal to a process + */ +int +actions_add_signal(struct actions *self, int signal, int pid) +{ + struct action *action = actions_new(self); + + self->present[ACTION_SIGNAL] = true; + action->type = ACTION_SIGNAL; + action->signal = signal; + action->pid = pid; + + return 0; +} + +/* + * actions_add_shell - add an action to execute a shell command + */ +int +actions_add_shell(struct actions *self, const char *command) +{ + struct action *action = actions_new(self); + + self->present[ACTION_SHELL] = true; + action->type = ACTION_SHELL; + action->command = calloc(strlen(command) + 1, sizeof(char)); + if (!action->command) + return -1; + strcpy(action->command, command); + + return 0; +} + +/* + * actions_add_continue - add an action to resume measurement + */ +int +actions_add_continue(struct actions *self) +{ + struct action *action = actions_new(self); + + self->present[ACTION_CONTINUE] = true; + action->type = ACTION_CONTINUE; + + return 0; +} + +/* + * actions_parse - add an action based on text specification + */ +int +actions_parse(struct actions *self, const char *trigger, const char *tracefn) +{ + enum action_type type = ACTION_NONE; + const char *token; + char trigger_c[strlen(trigger) + 1]; + + /* For ACTION_SIGNAL */ + int signal = 0, pid = 0; + + /* For ACTION_TRACE_OUTPUT */ + const char *trace_output; + + strcpy(trigger_c, trigger); + token = strtok(trigger_c, ","); + + if (strcmp(token, "trace") == 0) + type = ACTION_TRACE_OUTPUT; + else if (strcmp(token, "signal") == 0) + type = ACTION_SIGNAL; + else if (strcmp(token, "shell") == 0) + type = ACTION_SHELL; + else if (strcmp(token, "continue") == 0) + type = ACTION_CONTINUE; + else + /* Invalid trigger type */ + return -1; + + token = strtok(NULL, ","); + + switch (type) { + case ACTION_TRACE_OUTPUT: + /* Takes no argument */ + if (token == NULL) + trace_output = tracefn; + else { + if (strlen(token) > 5 && strncmp(token, "file=", 5) == 0) { + trace_output = token + 5; + } else { + /* Invalid argument */ + return -1; + } + + token = strtok(NULL, ","); + if (token != NULL) + /* Only one argument allowed */ + return -1; + } + return actions_add_trace_output(self, trace_output); + case ACTION_SIGNAL: + /* Takes two arguments, num (signal) and pid */ + while (token != NULL) { + if (strlen(token) > 4 && strncmp(token, "num=", 4) == 0) { + signal = atoi(token + 4); + } else if (strlen(token) > 4 && strncmp(token, "pid=", 4) == 0) { + if (strncmp(token + 4, "parent", 7) == 0) + pid = -1; + else + pid = atoi(token + 4); + } else { + /* Invalid argument */ + return -1; + } + + token = strtok(NULL, ","); + } + + if (!signal || !pid) + /* Missing argument */ + return -1; + + return actions_add_signal(self, signal, pid); + case ACTION_SHELL: + if (token == NULL) + return -1; + if (strlen(token) > 8 && strncmp(token, "command=", 8) == 0) + return actions_add_shell(self, token + 8); + return -1; + case ACTION_CONTINUE: + /* Takes no argument */ + if (token != NULL) + return -1; + return actions_add_continue(self); + default: + return -1; + } +} + +/* + * actions_perform - perform all actions + */ +int +actions_perform(struct actions *self) +{ + int pid, retval; + const struct action *action; + + for (action = self->list; action < self->list + self->len; action++) { + switch (action->type) { + case ACTION_TRACE_OUTPUT: + retval = save_trace_to_file(self->trace_output_inst, action->trace_output); + if (retval) { + err_msg("Error saving trace\n"); + return retval; + } + break; + case ACTION_SIGNAL: + if (action->pid == -1) + pid = getppid(); + else + pid = action->pid; + retval = kill(pid, action->signal); + if (retval) { + err_msg("Error sending signal\n"); + return retval; + } + break; + case ACTION_SHELL: + retval = system(action->command); + if (retval) + return retval; + break; + case ACTION_CONTINUE: + self->continue_flag = true; + return 0; + default: + break; + } + } + + return 0; +} diff --git a/tools/tracing/rtla/src/actions.h b/tools/tracing/rtla/src/actions.h new file mode 100644 index 000000000000..a4f9b570775b --- /dev/null +++ b/tools/tracing/rtla/src/actions.h @@ -0,0 +1,52 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#include <tracefs.h> +#include <stdbool.h> + +enum action_type { + ACTION_NONE = 0, + ACTION_TRACE_OUTPUT, + ACTION_SIGNAL, + ACTION_SHELL, + ACTION_CONTINUE, + ACTION_FIELD_N +}; + +struct action { + enum action_type type; + union { + struct { + /* For ACTION_TRACE_OUTPUT */ + char *trace_output; + }; + struct { + /* For ACTION_SIGNAL */ + int signal; + int pid; + }; + struct { + /* For ACTION_SHELL */ + char *command; + }; + }; +}; + +static const int action_default_size = 8; + +struct actions { + struct action *list; + int len, size; + bool present[ACTION_FIELD_N]; + bool continue_flag; + + /* External dependencies */ + struct tracefs_instance *trace_output_inst; +}; + +void actions_init(struct actions *self); +void actions_destroy(struct actions *self); +int actions_add_trace_output(struct actions *self, const char *trace_output); +int actions_add_signal(struct actions *self, int signal, int pid); +int actions_add_shell(struct actions *self, const char *command); +int actions_add_continue(struct actions *self); +int actions_parse(struct actions *self, const char *trigger, const char *tracefn); +int actions_perform(struct actions *self); diff --git a/tools/tracing/rtla/src/common.c b/tools/tracing/rtla/src/common.c new file mode 100644 index 000000000000..b197037fc58b --- /dev/null +++ b/tools/tracing/rtla/src/common.c @@ -0,0 +1,350 @@ +// SPDX-License-Identifier: GPL-2.0 +#define _GNU_SOURCE + +#include <pthread.h> +#include <signal.h> +#include <stdlib.h> +#include <unistd.h> +#include "common.h" + +struct trace_instance *trace_inst; +int stop_tracing; + +static void stop_trace(int sig) +{ + if (stop_tracing) { + /* + * Stop requested twice in a row; abort event processing and + * exit immediately + */ + tracefs_iterate_stop(trace_inst->inst); + return; + } + stop_tracing = 1; + if (trace_inst) + trace_instance_stop(trace_inst); +} + +/* + * set_signals - handles the signal to stop the tool + */ +static void set_signals(struct common_params *params) +{ + signal(SIGINT, stop_trace); + if (params->duration) { + signal(SIGALRM, stop_trace); + alarm(params->duration); + } +} + +/* + * common_apply_config - apply common configs to the initialized tool + */ +int +common_apply_config(struct osnoise_tool *tool, struct common_params *params) +{ + int retval, i; + + if (!params->sleep_time) + params->sleep_time = 1; + + retval = osnoise_set_cpus(tool->context, params->cpus ? params->cpus : "all"); + if (retval) { + err_msg("Failed to apply CPUs config\n"); + goto out_err; + } + + if (!params->cpus) { + for (i = 0; i < sysconf(_SC_NPROCESSORS_CONF); i++) + CPU_SET(i, ¶ms->monitored_cpus); + } + + if (params->hk_cpus) { + retval = sched_setaffinity(getpid(), sizeof(params->hk_cpu_set), + ¶ms->hk_cpu_set); + if (retval == -1) { + err_msg("Failed to set rtla to the house keeping CPUs\n"); + goto out_err; + } + } else if (params->cpus) { + /* + * Even if the user do not set a house-keeping CPU, try to + * move rtla to a CPU set different to the one where the user + * set the workload to run. + * + * No need to check results as this is an automatic attempt. + */ + auto_house_keeping(¶ms->monitored_cpus); + } + + /* + * Set workload according to type of thread if the kernel supports it. + * On kernels without support, user threads will have already failed + * on missing fd, and kernel threads do not need it. + */ + retval = osnoise_set_workload(tool->context, params->kernel_workload); + if (retval < -1) { + err_msg("Failed to set OSNOISE_WORKLOAD option\n"); + goto out_err; + } + + return 0; + +out_err: + return -1; +} + + +int run_tool(struct tool_ops *ops, int argc, char *argv[]) +{ + struct common_params *params; + enum result return_value = ERROR; + struct osnoise_tool *tool; + bool stopped; + int retval; + + params = ops->parse_args(argc, argv); + if (!params) + exit(1); + + tool = ops->init_tool(params); + if (!tool) { + err_msg("Could not init osnoise tool\n"); + goto out_exit; + } + tool->ops = ops; + tool->params = params; + + /* + * Save trace instance into global variable so that SIGINT can stop + * the timerlat tracer. + * Otherwise, rtla could loop indefinitely when overloaded. + */ + trace_inst = &tool->trace; + + retval = ops->apply_config(tool); + if (retval) { + err_msg("Could not apply config\n"); + goto out_free; + } + + retval = enable_tracer_by_name(trace_inst->inst, ops->tracer); + if (retval) { + err_msg("Failed to enable %s tracer\n", ops->tracer); + goto out_free; + } + + if (params->set_sched) { + retval = set_comm_sched_attr(ops->comm_prefix, ¶ms->sched_param); + if (retval) { + err_msg("Failed to set sched parameters\n"); + goto out_free; + } + } + + if (params->cgroup && !params->user_data) { + retval = set_comm_cgroup(ops->comm_prefix, params->cgroup_name); + if (!retval) { + err_msg("Failed to move threads to cgroup\n"); + goto out_free; + } + } + + + if (params->threshold_actions.present[ACTION_TRACE_OUTPUT] || + params->end_actions.present[ACTION_TRACE_OUTPUT]) { + tool->record = osnoise_init_trace_tool(ops->tracer); + if (!tool->record) { + err_msg("Failed to enable the trace instance\n"); + goto out_free; + } + params->threshold_actions.trace_output_inst = tool->record->trace.inst; + params->end_actions.trace_output_inst = tool->record->trace.inst; + + if (params->events) { + retval = trace_events_enable(&tool->record->trace, params->events); + if (retval) + goto out_trace; + } + + if (params->buffer_size > 0) { + retval = trace_set_buffer_size(&tool->record->trace, params->buffer_size); + if (retval) + goto out_trace; + } + } + + if (params->user_workload) { + pthread_t user_thread; + + /* rtla asked to stop */ + params->user.should_run = 1; + /* all threads left */ + params->user.stopped_running = 0; + + params->user.set = ¶ms->monitored_cpus; + if (params->set_sched) + params->user.sched_param = ¶ms->sched_param; + else + params->user.sched_param = NULL; + + params->user.cgroup_name = params->cgroup_name; + + retval = pthread_create(&user_thread, NULL, timerlat_u_dispatcher, ¶ms->user); + if (retval) + err_msg("Error creating timerlat user-space threads\n"); + } + + retval = ops->enable(tool); + if (retval) + goto out_trace; + + tool->start_time = time(NULL); + set_signals(params); + + retval = ops->main(tool); + if (retval) + goto out_trace; + + if (params->user_workload && !params->user.stopped_running) { + params->user.should_run = 0; + sleep(1); + } + + ops->print_stats(tool); + + actions_perform(¶ms->end_actions); + + return_value = PASSED; + + stopped = osnoise_trace_is_off(tool, tool->record) && !stop_tracing; + if (stopped) { + printf("%s hit stop tracing\n", ops->tracer); + return_value = FAILED; + } + + if (ops->analyze) + ops->analyze(tool, stopped); + +out_trace: + trace_events_destroy(&tool->record->trace, params->events); + params->events = NULL; +out_free: + ops->free(tool); + osnoise_destroy_tool(tool->record); + osnoise_destroy_tool(tool); + actions_destroy(¶ms->threshold_actions); + actions_destroy(¶ms->end_actions); + free(params); +out_exit: + exit(return_value); +} + +int top_main_loop(struct osnoise_tool *tool) +{ + struct common_params *params = tool->params; + struct trace_instance *trace = &tool->trace; + struct osnoise_tool *record = tool->record; + int retval; + + while (!stop_tracing) { + sleep(params->sleep_time); + + if (params->aa_only && !osnoise_trace_is_off(tool, record)) + continue; + + retval = tracefs_iterate_raw_events(trace->tep, + trace->inst, + NULL, + 0, + collect_registered_events, + trace); + if (retval < 0) { + err_msg("Error iterating on events\n"); + return retval; + } + + if (!params->quiet) + tool->ops->print_stats(tool); + + if (osnoise_trace_is_off(tool, record)) { + if (stop_tracing) + /* stop tracing requested, do not perform actions */ + return 0; + + actions_perform(¶ms->threshold_actions); + + if (!params->threshold_actions.continue_flag) + /* continue flag not set, break */ + return 0; + + /* continue action reached, re-enable tracing */ + if (record) + trace_instance_start(&record->trace); + if (tool->aa) + trace_instance_start(&tool->aa->trace); + trace_instance_start(trace); + } + + /* is there still any user-threads ? */ + if (params->user_workload) { + if (params->user.stopped_running) { + debug_msg("timerlat user space threads stopped!\n"); + break; + } + } + } + + return 0; +} + +int hist_main_loop(struct osnoise_tool *tool) +{ + struct common_params *params = tool->params; + struct trace_instance *trace = &tool->trace; + int retval = 0; + + while (!stop_tracing) { + sleep(params->sleep_time); + + retval = tracefs_iterate_raw_events(trace->tep, + trace->inst, + NULL, + 0, + collect_registered_events, + trace); + if (retval < 0) { + err_msg("Error iterating on events\n"); + break; + } + + if (osnoise_trace_is_off(tool, tool->record)) { + if (stop_tracing) + /* stop tracing requested, do not perform actions */ + break; + + actions_perform(¶ms->threshold_actions); + + if (!params->threshold_actions.continue_flag) + /* continue flag not set, break */ + break; + + /* continue action reached, re-enable tracing */ + if (tool->record) + trace_instance_start(&tool->record->trace); + if (tool->aa) + trace_instance_start(&tool->aa->trace); + trace_instance_start(&tool->trace); + } + + /* is there still any user-threads ? */ + if (params->user_workload) { + if (params->user.stopped_running) { + debug_msg("user-space threads stopped!\n"); + break; + } + } + } + + return retval; +} diff --git a/tools/tracing/rtla/src/common.h b/tools/tracing/rtla/src/common.h new file mode 100644 index 000000000000..9ec2b7632c37 --- /dev/null +++ b/tools/tracing/rtla/src/common.h @@ -0,0 +1,158 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#pragma once + +#include "actions.h" +#include "timerlat_u.h" +#include "trace.h" +#include "utils.h" + +/* + * osnoise_context - read, store, write, restore osnoise configs. + */ +struct osnoise_context { + int flags; + int ref; + + char *curr_cpus; + char *orig_cpus; + + /* 0 as init value */ + unsigned long long orig_runtime_us; + unsigned long long runtime_us; + + /* 0 as init value */ + unsigned long long orig_period_us; + unsigned long long period_us; + + /* 0 as init value */ + long long orig_timerlat_period_us; + long long timerlat_period_us; + + /* 0 as init value */ + long long orig_tracing_thresh; + long long tracing_thresh; + + /* -1 as init value because 0 is disabled */ + long long orig_stop_us; + long long stop_us; + + /* -1 as init value because 0 is disabled */ + long long orig_stop_total_us; + long long stop_total_us; + + /* -1 as init value because 0 is disabled */ + long long orig_print_stack; + long long print_stack; + + /* -1 as init value because 0 is off */ + int orig_opt_irq_disable; + int opt_irq_disable; + + /* -1 as init value because 0 is off */ + int orig_opt_workload; + int opt_workload; +}; + +extern struct trace_instance *trace_inst; +extern int stop_tracing; + +struct hist_params { + char no_irq; + char no_thread; + char no_header; + char no_summary; + char no_index; + char with_zeros; + int bucket_size; + int entries; +}; + +/* + * common_params - Parameters shared between timerlat_params and osnoise_params + */ +struct common_params { + /* trace configuration */ + char *cpus; + cpu_set_t monitored_cpus; + struct trace_events *events; + int buffer_size; + + /* Timing parameters */ + int warmup; + long long stop_us; + long long stop_total_us; + int sleep_time; + int duration; + + /* Scheduling parameters */ + int set_sched; + struct sched_attr sched_param; + int cgroup; + char *cgroup_name; + int hk_cpus; + cpu_set_t hk_cpu_set; + + /* Other parameters */ + struct hist_params hist; + int output_divisor; + int pretty_output; + int quiet; + int user_workload; + int kernel_workload; + int user_data; + int aa_only; + + struct actions threshold_actions; + struct actions end_actions; + struct timerlat_u_params user; +}; + +#define for_each_monitored_cpu(cpu, nr_cpus, common) \ + for (cpu = 0; cpu < nr_cpus; cpu++) \ + if (!(common)->cpus || CPU_ISSET(cpu, &(common)->monitored_cpus)) + +struct tool_ops; + +/* + * osnoise_tool - osnoise based tool definition. + * + * Only the "trace" and "context" fields are used for + * the additional trace instances (record and aa). + */ +struct osnoise_tool { + struct tool_ops *ops; + struct trace_instance trace; + struct osnoise_context *context; + void *data; + struct common_params *params; + time_t start_time; + struct osnoise_tool *record; + struct osnoise_tool *aa; +}; + +struct tool_ops { + const char *tracer; + const char *comm_prefix; + struct common_params *(*parse_args)(int argc, char *argv[]); + struct osnoise_tool *(*init_tool)(struct common_params *params); + int (*apply_config)(struct osnoise_tool *tool); + int (*enable)(struct osnoise_tool *tool); + int (*main)(struct osnoise_tool *tool); + void (*print_stats)(struct osnoise_tool *tool); + void (*analyze)(struct osnoise_tool *tool, bool stopped); + void (*free)(struct osnoise_tool *tool); +}; + +int osnoise_set_cpus(struct osnoise_context *context, char *cpus); +void osnoise_restore_cpus(struct osnoise_context *context); + +int osnoise_set_workload(struct osnoise_context *context, bool onoff); + +void osnoise_destroy_tool(struct osnoise_tool *top); +struct osnoise_tool *osnoise_init_tool(char *tool_name); +struct osnoise_tool *osnoise_init_trace_tool(const char *tracer); +bool osnoise_trace_is_off(struct osnoise_tool *tool, struct osnoise_tool *record); + +int common_apply_config(struct osnoise_tool *tool, struct common_params *params); +int top_main_loop(struct osnoise_tool *tool); +int hist_main_loop(struct osnoise_tool *tool); diff --git a/tools/tracing/rtla/src/osnoise.c b/tools/tracing/rtla/src/osnoise.c index 245e9344932b..312c511fa004 100644 --- a/tools/tracing/rtla/src/osnoise.c +++ b/tools/tracing/rtla/src/osnoise.c @@ -3,6 +3,7 @@ * Copyright (C) 2021 Red Hat Inc, Daniel Bristot de Oliveira <bristot@kernel.org> */ +#define _GNU_SOURCE #include <sys/types.h> #include <sys/stat.h> #include <pthread.h> @@ -12,9 +13,12 @@ #include <errno.h> #include <fcntl.h> #include <stdio.h> +#include <sched.h> #include "osnoise.h" -#include "utils.h" + +#define DEFAULT_SAMPLE_PERIOD 1000000 /* 1s */ +#define DEFAULT_SAMPLE_RUNTIME 1000000 /* 1s */ /* * osnoise_get_cpus - return the original "osnoise/cpus" content @@ -867,7 +871,7 @@ int osnoise_set_workload(struct osnoise_context *context, bool onoff) retval = osnoise_options_set_option("OSNOISE_WORKLOAD", onoff); if (retval < 0) - return -1; + return -2; context->opt_workload = onoff; @@ -902,22 +906,6 @@ static void osnoise_put_workload(struct osnoise_context *context) context->orig_opt_workload = OSNOISE_OPTION_INIT_VAL; } -/* - * enable_osnoise - enable osnoise tracer in the trace_instance - */ -int enable_osnoise(struct trace_instance *trace) -{ - return enable_tracer_by_name(trace->inst, "osnoise"); -} - -/* - * enable_timerlat - enable timerlat tracer in the trace_instance - */ -int enable_timerlat(struct trace_instance *trace) -{ - return enable_tracer_by_name(trace->inst, "timerlat"); -} - enum { FLAG_CONTEXT_NEWLY_CREATED = (1 << 0), FLAG_CONTEXT_DELETED = (1 << 1), @@ -1052,7 +1040,7 @@ out_err: /* * osnoise_init_trace_tool - init a tracer instance to trace osnoise events */ -struct osnoise_tool *osnoise_init_trace_tool(char *tracer) +struct osnoise_tool *osnoise_init_trace_tool(const char *tracer) { struct osnoise_tool *trace; int retval; @@ -1079,6 +1067,129 @@ out_err: return NULL; } +bool osnoise_trace_is_off(struct osnoise_tool *tool, struct osnoise_tool *record) +{ + /* + * The tool instance is always present, it is the one used to collect + * data. + */ + if (!tracefs_trace_is_on(tool->trace.inst)) + return true; + + /* + * The trace record instance is only enabled when -t is set. IOW, when the system + * is tracing. + */ + return record && !tracefs_trace_is_on(record->trace.inst); +} + +/* + * osnoise_report_missed_events - report number of events dropped by trace + * buffer + */ +void +osnoise_report_missed_events(struct osnoise_tool *tool) +{ + unsigned long long total_events; + + if (tool->trace.missed_events == UINT64_MAX) + printf("unknown number of events missed, results might not be accurate\n"); + else if (tool->trace.missed_events > 0) { + total_events = tool->trace.processed_events + tool->trace.missed_events; + + printf("%lld (%.2f%%) events missed, results might not be accurate\n", + tool->trace.missed_events, + (double) tool->trace.missed_events / total_events * 100.0); + } +} + +/* + * osnoise_apply_config - apply osnoise configs to the initialized tool + */ +int +osnoise_apply_config(struct osnoise_tool *tool, struct osnoise_params *params) +{ + int retval; + + params->common.kernel_workload = true; + + if (params->runtime || params->period) { + retval = osnoise_set_runtime_period(tool->context, + params->runtime, + params->period); + } else { + retval = osnoise_set_runtime_period(tool->context, + DEFAULT_SAMPLE_PERIOD, + DEFAULT_SAMPLE_RUNTIME); + } + + if (retval) { + err_msg("Failed to set runtime and/or period\n"); + goto out_err; + } + + retval = osnoise_set_stop_us(tool->context, params->common.stop_us); + if (retval) { + err_msg("Failed to set stop us\n"); + goto out_err; + } + + retval = osnoise_set_stop_total_us(tool->context, params->common.stop_total_us); + if (retval) { + err_msg("Failed to set stop total us\n"); + goto out_err; + } + + retval = osnoise_set_tracing_thresh(tool->context, params->threshold); + if (retval) { + err_msg("Failed to set tracing_thresh\n"); + goto out_err; + } + + return common_apply_config(tool, ¶ms->common); + +out_err: + return -1; +} + +int osnoise_enable(struct osnoise_tool *tool) +{ + struct osnoise_params *params = to_osnoise_params(tool->params); + int retval; + + /* + * Start the tracer here, after having set all instances. + * + * Let the trace instance start first for the case of hitting a stop + * tracing while enabling other instances. The trace instance is the + * one with most valuable information. + */ + if (tool->record) + trace_instance_start(&tool->record->trace); + trace_instance_start(&tool->trace); + + if (params->common.warmup > 0) { + debug_msg("Warming up for %d seconds\n", params->common.warmup); + sleep(params->common.warmup); + if (stop_tracing) + return -1; + + /* + * Clean up the buffer. The osnoise workload do not run + * with tracing off to avoid creating a performance penalty + * when not needed. + */ + retval = tracefs_instance_file_write(tool->trace.inst, "trace", ""); + if (retval < 0) { + debug_msg("Error cleaning up the buffer"); + return retval; + } + + } + + return 0; +} + static void osnoise_usage(int err) { int i; @@ -1112,7 +1223,7 @@ int osnoise_main(int argc, char *argv[]) * default cmdline. */ if (argc == 1) { - osnoise_top_main(argc, argv); + run_tool(&osnoise_top_ops, argc, argv); exit(0); } @@ -1120,13 +1231,13 @@ int osnoise_main(int argc, char *argv[]) osnoise_usage(0); } else if (strncmp(argv[1], "-", 1) == 0) { /* the user skipped the tool, call the default one */ - osnoise_top_main(argc, argv); + run_tool(&osnoise_top_ops, argc, argv); exit(0); } else if (strcmp(argv[1], "top") == 0) { - osnoise_top_main(argc-1, &argv[1]); + run_tool(&osnoise_top_ops, argc-1, &argv[1]); exit(0); } else if (strcmp(argv[1], "hist") == 0) { - osnoise_hist_main(argc-1, &argv[1]); + run_tool(&osnoise_hist_ops, argc-1, &argv[1]); exit(0); } @@ -1137,6 +1248,6 @@ usage: int hwnoise_main(int argc, char *argv[]) { - osnoise_top_main(argc, argv); + run_tool(&osnoise_top_ops, argc, argv); exit(0); } diff --git a/tools/tracing/rtla/src/osnoise.h b/tools/tracing/rtla/src/osnoise.h index 555f4f4903cc..895687030c0b 100644 --- a/tools/tracing/rtla/src/osnoise.h +++ b/tools/tracing/rtla/src/osnoise.h @@ -1,53 +1,23 @@ // SPDX-License-Identifier: GPL-2.0 -#include "trace.h" +#pragma once -/* - * osnoise_context - read, store, write, restore osnoise configs. - */ -struct osnoise_context { - int flags; - int ref; - - char *curr_cpus; - char *orig_cpus; - - /* 0 as init value */ - unsigned long long orig_runtime_us; - unsigned long long runtime_us; - - /* 0 as init value */ - unsigned long long orig_period_us; - unsigned long long period_us; - - /* 0 as init value */ - long long orig_timerlat_period_us; - long long timerlat_period_us; - - /* 0 as init value */ - long long orig_tracing_thresh; - long long tracing_thresh; - - /* -1 as init value because 0 is disabled */ - long long orig_stop_us; - long long stop_us; - - /* -1 as init value because 0 is disabled */ - long long orig_stop_total_us; - long long stop_total_us; - - /* -1 as init value because 0 is disabled */ - long long orig_print_stack; - long long print_stack; +#include "common.h" - /* -1 as init value because 0 is off */ - int orig_opt_irq_disable; - int opt_irq_disable; +enum osnoise_mode { + MODE_OSNOISE = 0, + MODE_HWNOISE +}; - /* -1 as init value because 0 is off */ - int orig_opt_workload; - int opt_workload; +struct osnoise_params { + struct common_params common; + unsigned long long runtime; + unsigned long long period; + long long threshold; + enum osnoise_mode mode; }; +#define to_osnoise_params(ptr) container_of(ptr, struct osnoise_params, common) + /* * *_INIT_VALs are also invalid values, they are used to * communicate errors. @@ -59,9 +29,6 @@ struct osnoise_context *osnoise_context_alloc(void); int osnoise_get_context(struct osnoise_context *context); void osnoise_put_context(struct osnoise_context *context); -int osnoise_set_cpus(struct osnoise_context *context, char *cpus); -void osnoise_restore_cpus(struct osnoise_context *context); - int osnoise_set_runtime_period(struct osnoise_context *context, unsigned long long runtime, unsigned long long period); @@ -88,24 +55,17 @@ int osnoise_set_print_stack(struct osnoise_context *context, long long print_stack); int osnoise_set_irq_disable(struct osnoise_context *context, bool onoff); -int osnoise_set_workload(struct osnoise_context *context, bool onoff); - -/* - * osnoise_tool - osnoise based tool definition. - */ -struct osnoise_tool { - struct trace_instance trace; - struct osnoise_context *context; - void *data; - void *params; - time_t start_time; -}; - -void osnoise_destroy_tool(struct osnoise_tool *top); -struct osnoise_tool *osnoise_init_tool(char *tool_name); -struct osnoise_tool *osnoise_init_trace_tool(char *tracer); +void osnoise_report_missed_events(struct osnoise_tool *tool); +int osnoise_apply_config(struct osnoise_tool *tool, struct osnoise_params *params); int osnoise_hist_main(int argc, char *argv[]); int osnoise_top_main(int argc, char **argv); +int osnoise_enable(struct osnoise_tool *tool); int osnoise_main(int argc, char **argv); int hwnoise_main(int argc, char **argv); + +extern struct tool_ops timerlat_top_ops, timerlat_hist_ops; +extern struct tool_ops osnoise_top_ops, osnoise_hist_ops; + +int run_tool(struct tool_ops *ops, int argc, char *argv[]); +int hist_main_loop(struct osnoise_tool *tool); diff --git a/tools/tracing/rtla/src/osnoise_hist.c b/tools/tracing/rtla/src/osnoise_hist.c index 8f81fa007364..ff8c231e47c4 100644 --- a/tools/tracing/rtla/src/osnoise_hist.c +++ b/tools/tracing/rtla/src/osnoise_hist.c @@ -12,39 +12,9 @@ #include <errno.h> #include <stdio.h> #include <time.h> -#include <sched.h> -#include "utils.h" #include "osnoise.h" -struct osnoise_hist_params { - char *cpus; - cpu_set_t monitored_cpus; - char *trace_output; - char *cgroup_name; - unsigned long long runtime; - unsigned long long period; - long long threshold; - long long stop_us; - long long stop_total_us; - int sleep_time; - int duration; - int set_sched; - int output_divisor; - int cgroup; - int hk_cpus; - cpu_set_t hk_cpu_set; - struct sched_attr sched_param; - struct trace_events *events; - - char no_header; - char no_summary; - char no_index; - char with_zeros; - int bucket_size; - int entries; -}; - struct osnoise_hist_cpu { int *samples; int count; @@ -84,6 +54,11 @@ osnoise_free_histogram(struct osnoise_hist_data *data) free(data); } +static void osnoise_free_hist_tool(struct osnoise_tool *tool) +{ + osnoise_free_histogram(tool->data); +} + /* * osnoise_alloc_histogram - alloc runtime data */ @@ -125,18 +100,17 @@ cleanup: static void osnoise_hist_update_multiple(struct osnoise_tool *tool, int cpu, unsigned long long duration, int count) { - struct osnoise_hist_params *params = tool->params; + struct osnoise_params *params = to_osnoise_params(tool->params); struct osnoise_hist_data *data = tool->data; unsigned long long total_duration; int entries = data->entries; int bucket; int *hist; - if (params->output_divisor) - duration = duration / params->output_divisor; + if (params->common.output_divisor) + duration = duration / params->common.output_divisor; - if (data->bucket_size) - bucket = duration / data->bucket_size; + bucket = duration / data->bucket_size; total_duration = duration * count; @@ -168,7 +142,7 @@ static void osnoise_destroy_trace_hist(struct osnoise_tool *tool) */ static int osnoise_init_trace_hist(struct osnoise_tool *tool) { - struct osnoise_hist_params *params = tool->params; + struct osnoise_params *params = to_osnoise_params(tool->params); struct osnoise_hist_data *data = tool->data; int bucket_size; char buff[128]; @@ -177,7 +151,7 @@ static int osnoise_init_trace_hist(struct osnoise_tool *tool) /* * Set the size of the bucket. */ - bucket_size = params->output_divisor * params->bucket_size; + bucket_size = params->common.output_divisor * params->common.hist.bucket_size; snprintf(buff, sizeof(buff), "duration.buckets=%d", bucket_size); data->trace_hist = tracefs_hist_alloc(tool->trace.tep, "osnoise", "sample_threshold", @@ -253,29 +227,27 @@ static void osnoise_read_trace_hist(struct osnoise_tool *tool) */ static void osnoise_hist_header(struct osnoise_tool *tool) { - struct osnoise_hist_params *params = tool->params; + struct osnoise_params *params = to_osnoise_params(tool->params); struct osnoise_hist_data *data = tool->data; struct trace_seq *s = tool->trace.seq; char duration[26]; int cpu; - if (params->no_header) + if (params->common.hist.no_header) return; get_duration(tool->start_time, duration, sizeof(duration)); trace_seq_printf(s, "# RTLA osnoise histogram\n"); trace_seq_printf(s, "# Time unit is %s (%s)\n", - params->output_divisor == 1 ? "nanoseconds" : "microseconds", - params->output_divisor == 1 ? "ns" : "us"); + params->common.output_divisor == 1 ? "nanoseconds" : "microseconds", + params->common.output_divisor == 1 ? "ns" : "us"); trace_seq_printf(s, "# Duration: %s\n", duration); - if (!params->no_index) + if (!params->common.hist.no_index) trace_seq_printf(s, "Index"); - for (cpu = 0; cpu < data->nr_cpus; cpu++) { - if (params->cpus && !CPU_ISSET(cpu, ¶ms->monitored_cpus)) - continue; + for_each_monitored_cpu(cpu, data->nr_cpus, ¶ms->common) { if (!data->hist[cpu].count) continue; @@ -292,21 +264,19 @@ static void osnoise_hist_header(struct osnoise_tool *tool) * osnoise_print_summary - print the summary of the hist data to the output */ static void -osnoise_print_summary(struct osnoise_hist_params *params, +osnoise_print_summary(struct osnoise_params *params, struct trace_instance *trace, struct osnoise_hist_data *data) { int cpu; - if (params->no_summary) + if (params->common.hist.no_summary) return; - if (!params->no_index) + if (!params->common.hist.no_index) trace_seq_printf(trace->seq, "count:"); - for (cpu = 0; cpu < data->nr_cpus; cpu++) { - if (params->cpus && !CPU_ISSET(cpu, ¶ms->monitored_cpus)) - continue; + for_each_monitored_cpu(cpu, data->nr_cpus, ¶ms->common) { if (!data->hist[cpu].count) continue; @@ -315,12 +285,10 @@ osnoise_print_summary(struct osnoise_hist_params *params, } trace_seq_printf(trace->seq, "\n"); - if (!params->no_index) + if (!params->common.hist.no_index) trace_seq_printf(trace->seq, "min: "); - for (cpu = 0; cpu < data->nr_cpus; cpu++) { - if (params->cpus && !CPU_ISSET(cpu, ¶ms->monitored_cpus)) - continue; + for_each_monitored_cpu(cpu, data->nr_cpus, ¶ms->common) { if (!data->hist[cpu].count) continue; @@ -330,12 +298,10 @@ osnoise_print_summary(struct osnoise_hist_params *params, } trace_seq_printf(trace->seq, "\n"); - if (!params->no_index) + if (!params->common.hist.no_index) trace_seq_printf(trace->seq, "avg: "); - for (cpu = 0; cpu < data->nr_cpus; cpu++) { - if (params->cpus && !CPU_ISSET(cpu, ¶ms->monitored_cpus)) - continue; + for_each_monitored_cpu(cpu, data->nr_cpus, ¶ms->common) { if (!data->hist[cpu].count) continue; @@ -348,12 +314,10 @@ osnoise_print_summary(struct osnoise_hist_params *params, } trace_seq_printf(trace->seq, "\n"); - if (!params->no_index) + if (!params->common.hist.no_index) trace_seq_printf(trace->seq, "max: "); - for (cpu = 0; cpu < data->nr_cpus; cpu++) { - if (params->cpus && !CPU_ISSET(cpu, ¶ms->monitored_cpus)) - continue; + for_each_monitored_cpu(cpu, data->nr_cpus, ¶ms->common) { if (!data->hist[cpu].count) continue; @@ -370,10 +334,12 @@ osnoise_print_summary(struct osnoise_hist_params *params, * osnoise_print_stats - print data for all CPUs */ static void -osnoise_print_stats(struct osnoise_hist_params *params, struct osnoise_tool *tool) +osnoise_print_stats(struct osnoise_tool *tool) { + struct osnoise_params *params = to_osnoise_params(tool->params); struct osnoise_hist_data *data = tool->data; struct trace_instance *trace = &tool->trace; + int has_samples = 0; int bucket, cpu; int total; @@ -382,13 +348,11 @@ osnoise_print_stats(struct osnoise_hist_params *params, struct osnoise_tool *too for (bucket = 0; bucket < data->entries; bucket++) { total = 0; - if (!params->no_index) + if (!params->common.hist.no_index) trace_seq_printf(trace->seq, "%-6d", bucket * data->bucket_size); - for (cpu = 0; cpu < data->nr_cpus; cpu++) { - if (params->cpus && !CPU_ISSET(cpu, ¶ms->monitored_cpus)) - continue; + for_each_monitored_cpu(cpu, data->nr_cpus, ¶ms->common) { if (!data->hist[cpu].count) continue; @@ -397,22 +361,34 @@ osnoise_print_stats(struct osnoise_hist_params *params, struct osnoise_tool *too trace_seq_printf(trace->seq, "%9d ", data->hist[cpu].samples[bucket]); } - if (total == 0 && !params->with_zeros) { + if (total == 0 && !params->common.hist.with_zeros) { trace_seq_reset(trace->seq); continue; } + /* There are samples above the threshold */ + has_samples = 1; trace_seq_printf(trace->seq, "\n"); trace_seq_do_printf(trace->seq); trace_seq_reset(trace->seq); } - if (!params->no_index) + /* + * If no samples were recorded, skip calculations, print zeroed statistics + * and return. + */ + if (!has_samples) { + trace_seq_reset(trace->seq); + trace_seq_printf(trace->seq, "over: 0\ncount: 0\nmin: 0\navg: 0\nmax: 0\n"); + trace_seq_do_printf(trace->seq); + trace_seq_reset(trace->seq); + return; + } + + if (!params->common.hist.no_index) trace_seq_printf(trace->seq, "over: "); - for (cpu = 0; cpu < data->nr_cpus; cpu++) { - if (params->cpus && !CPU_ISSET(cpu, ¶ms->monitored_cpus)) - continue; + for_each_monitored_cpu(cpu, data->nr_cpus, ¶ms->common) { if (!data->hist[cpu].count) continue; @@ -425,21 +401,22 @@ osnoise_print_stats(struct osnoise_hist_params *params, struct osnoise_tool *too trace_seq_reset(trace->seq); osnoise_print_summary(params, trace, data); + osnoise_report_missed_events(tool); } /* * osnoise_hist_usage - prints osnoise hist usage message */ -static void osnoise_hist_usage(char *usage) +static void osnoise_hist_usage(void) { int i; static const char * const msg[] = { "", " usage: rtla osnoise hist [-h] [-D] [-d s] [-a us] [-p us] [-r us] [-s us] [-S us] \\", - " [-T us] [-t[=file]] [-e sys[:event]] [--filter <filter>] [--trigger <trigger>] \\", + " [-T us] [-t [file]] [-e sys[:event]] [--filter <filter>] [--trigger <trigger>] \\", " [-c cpu-list] [-H cpu-list] [-P priority] [-b N] [-E N] [--no-header] [--no-summary] \\", - " [--no-index] [--with-zeros] [-C[=cgroup_name]]", + " [--no-index] [--with-zeros] [-C [cgroup_name]] [--warm-up]", "", " -h/--help: print this menu", " -a/--auto: set automatic trace mode, stopping the session if argument in us sample is hit", @@ -450,10 +427,10 @@ static void osnoise_hist_usage(char *usage) " -T/--threshold us: the minimum delta to be considered a noise", " -c/--cpus cpu-list: list of cpus to run osnoise threads", " -H/--house-keeping cpus: run rtla control threads only on the given cpus", - " -C/--cgroup[=cgroup_name]: set cgroup, if no cgroup_name is passed, the rtla's cgroup will be inherited", + " -C/--cgroup [cgroup_name]: set cgroup, if no cgroup_name is passed, the rtla's cgroup will be inherited", " -d/--duration time[s|m|h|d]: duration of the session", " -D/--debug: print debug info", - " -t/--trace[=file]: save the stopped trace to [file|osnoise_trace.txt]", + " -t/--trace [file]: save the stopped trace to [file|osnoise_trace.txt]", " -e/--event <sys:event>: enable the <sys:event> in the trace instance, multiple -e are allowed", " --filter <filter>: enable a trace event filter to the previous -e event", " --trigger <trigger>: enable a trace event trigger to the previous -e event", @@ -469,39 +446,45 @@ static void osnoise_hist_usage(char *usage) " f:prio - use SCHED_FIFO with prio", " d:runtime[us|ms|s]:period[us|ms|s] - use SCHED_DEADLINE with runtime and period", " in nanoseconds", + " --warm-up: let the workload run for s seconds before collecting data", + " --trace-buffer-size kB: set the per-cpu trace buffer size in kB", + " --on-threshold <action>: define action to be executed at stop-total threshold, multiple are allowed", + " --on-end <action>: define action to be executed at measurement end, multiple are allowed", NULL, }; - if (usage) - fprintf(stderr, "%s\n", usage); - fprintf(stderr, "rtla osnoise hist: a per-cpu histogram of the OS noise (version %s)\n", VERSION); for (i = 0; msg[i]; i++) fprintf(stderr, "%s\n", msg[i]); - exit(1); + + exit(EXIT_SUCCESS); } /* * osnoise_hist_parse_args - allocs, parse and fill the cmd line parameters */ -static struct osnoise_hist_params +static struct common_params *osnoise_hist_parse_args(int argc, char *argv[]) { - struct osnoise_hist_params *params; + struct osnoise_params *params; struct trace_events *tevent; int retval; int c; + char *trace_output = NULL; params = calloc(1, sizeof(*params)); if (!params) exit(1); + actions_init(¶ms->common.threshold_actions); + actions_init(¶ms->common.end_actions); + /* display data in microseconds */ - params->output_divisor = 1000; - params->bucket_size = 1; - params->entries = 256; + params->common.output_divisor = 1000; + params->common.hist.bucket_size = 1; + params->common.hist.entries = 256; while (1) { static struct option long_options[] = { @@ -528,14 +511,15 @@ static struct osnoise_hist_params {"with-zeros", no_argument, 0, '3'}, {"trigger", required_argument, 0, '4'}, {"filter", required_argument, 0, '5'}, + {"warm-up", required_argument, 0, '6'}, + {"trace-buffer-size", required_argument, 0, '7'}, + {"on-threshold", required_argument, 0, '8'}, + {"on-end", required_argument, 0, '9'}, {0, 0, 0, 0} }; - /* getopt_long stores the option index here. */ - int option_index = 0; - - c = getopt_long(argc, argv, "a:c:C::b:d:e:E:DhH:p:P:r:s:S:t::T:01234:5:", - long_options, &option_index); + c = getopt_long(argc, argv, "a:c:C::b:d:e:E:DhH:p:P:r:s:S:t::T:01234:5:6:7:", + long_options, NULL); /* detect the end of the options. */ if (c == -1) @@ -544,237 +528,175 @@ static struct osnoise_hist_params switch (c) { case 'a': /* set sample stop to auto_thresh */ - params->stop_us = get_llong_from_str(optarg); + params->common.stop_us = get_llong_from_str(optarg); /* set sample threshold to 1 */ params->threshold = 1; /* set trace */ - params->trace_output = "osnoise_trace.txt"; + if (!trace_output) + trace_output = "osnoise_trace.txt"; break; case 'b': - params->bucket_size = get_llong_from_str(optarg); - if ((params->bucket_size == 0) || (params->bucket_size >= 1000000)) - osnoise_hist_usage("Bucket size needs to be > 0 and <= 1000000\n"); + params->common.hist.bucket_size = get_llong_from_str(optarg); + if (params->common.hist.bucket_size == 0 || + params->common.hist.bucket_size >= 1000000) + fatal("Bucket size needs to be > 0 and <= 1000000"); break; case 'c': - retval = parse_cpu_set(optarg, ¶ms->monitored_cpus); + retval = parse_cpu_set(optarg, ¶ms->common.monitored_cpus); if (retval) - osnoise_hist_usage("\nInvalid -c cpu list\n"); - params->cpus = optarg; + fatal("Invalid -c cpu list"); + params->common.cpus = optarg; break; case 'C': - params->cgroup = 1; - if (!optarg) { - /* will inherit this cgroup */ - params->cgroup_name = NULL; - } else if (*optarg == '=') { - /* skip the = */ - params->cgroup_name = ++optarg; - } + params->common.cgroup = 1; + params->common.cgroup_name = parse_optional_arg(argc, argv); break; case 'D': config_debug = 1; break; case 'd': - params->duration = parse_seconds_duration(optarg); - if (!params->duration) - osnoise_hist_usage("Invalid -D duration\n"); + params->common.duration = parse_seconds_duration(optarg); + if (!params->common.duration) + fatal("Invalid -D duration"); break; case 'e': tevent = trace_event_alloc(optarg); - if (!tevent) { - err_msg("Error alloc trace event"); - exit(EXIT_FAILURE); - } + if (!tevent) + fatal("Error alloc trace event"); - if (params->events) - tevent->next = params->events; + if (params->common.events) + tevent->next = params->common.events; - params->events = tevent; + params->common.events = tevent; break; case 'E': - params->entries = get_llong_from_str(optarg); - if ((params->entries < 10) || (params->entries > 9999999)) - osnoise_hist_usage("Entries must be > 10 and < 9999999\n"); + params->common.hist.entries = get_llong_from_str(optarg); + if (params->common.hist.entries < 10 || + params->common.hist.entries > 9999999) + fatal("Entries must be > 10 and < 9999999"); break; case 'h': case '?': - osnoise_hist_usage(NULL); + osnoise_hist_usage(); break; case 'H': - params->hk_cpus = 1; - retval = parse_cpu_set(optarg, ¶ms->hk_cpu_set); - if (retval) { - err_msg("Error parsing house keeping CPUs\n"); - exit(EXIT_FAILURE); - } + params->common.hk_cpus = 1; + retval = parse_cpu_set(optarg, ¶ms->common.hk_cpu_set); + if (retval) + fatal("Error parsing house keeping CPUs"); break; case 'p': params->period = get_llong_from_str(optarg); if (params->period > 10000000) - osnoise_hist_usage("Period longer than 10 s\n"); + fatal("Period longer than 10 s"); break; case 'P': - retval = parse_prio(optarg, ¶ms->sched_param); + retval = parse_prio(optarg, ¶ms->common.sched_param); if (retval == -1) - osnoise_hist_usage("Invalid -P priority"); - params->set_sched = 1; + fatal("Invalid -P priority"); + params->common.set_sched = 1; break; case 'r': params->runtime = get_llong_from_str(optarg); if (params->runtime < 100) - osnoise_hist_usage("Runtime shorter than 100 us\n"); + fatal("Runtime shorter than 100 us"); break; case 's': - params->stop_us = get_llong_from_str(optarg); + params->common.stop_us = get_llong_from_str(optarg); break; case 'S': - params->stop_total_us = get_llong_from_str(optarg); + params->common.stop_total_us = get_llong_from_str(optarg); break; case 'T': params->threshold = get_llong_from_str(optarg); break; case 't': - if (optarg) - /* skip = */ - params->trace_output = &optarg[1]; - else - params->trace_output = "osnoise_trace.txt"; + trace_output = parse_optional_arg(argc, argv); + if (!trace_output) + trace_output = "osnoise_trace.txt"; break; case '0': /* no header */ - params->no_header = 1; + params->common.hist.no_header = 1; break; case '1': /* no summary */ - params->no_summary = 1; + params->common.hist.no_summary = 1; break; case '2': /* no index */ - params->no_index = 1; + params->common.hist.no_index = 1; break; case '3': /* with zeros */ - params->with_zeros = 1; + params->common.hist.with_zeros = 1; break; case '4': /* trigger */ - if (params->events) { - retval = trace_event_add_trigger(params->events, optarg); - if (retval) { - err_msg("Error adding trigger %s\n", optarg); - exit(EXIT_FAILURE); - } + if (params->common.events) { + retval = trace_event_add_trigger(params->common.events, optarg); + if (retval) + fatal("Error adding trigger %s", optarg); } else { - osnoise_hist_usage("--trigger requires a previous -e\n"); + fatal("--trigger requires a previous -e"); } break; case '5': /* filter */ - if (params->events) { - retval = trace_event_add_filter(params->events, optarg); - if (retval) { - err_msg("Error adding filter %s\n", optarg); - exit(EXIT_FAILURE); - } + if (params->common.events) { + retval = trace_event_add_filter(params->common.events, optarg); + if (retval) + fatal("Error adding filter %s", optarg); } else { - osnoise_hist_usage("--filter requires a previous -e\n"); + fatal("--filter requires a previous -e"); } break; + case '6': + params->common.warmup = get_llong_from_str(optarg); + break; + case '7': + params->common.buffer_size = get_llong_from_str(optarg); + break; + case '8': + retval = actions_parse(¶ms->common.threshold_actions, optarg, + "osnoise_trace.txt"); + if (retval) + fatal("Invalid action %s", optarg); + break; + case '9': + retval = actions_parse(¶ms->common.end_actions, optarg, + "osnoise_trace.txt"); + if (retval) + fatal("Invalid action %s", optarg); + break; default: - osnoise_hist_usage("Invalid option"); + fatal("Invalid option"); } } - if (geteuid()) { - err_msg("rtla needs root permission\n"); - exit(EXIT_FAILURE); - } + if (trace_output) + actions_add_trace_output(¶ms->common.threshold_actions, trace_output); + + if (geteuid()) + fatal("rtla needs root permission"); - if (params->no_index && !params->with_zeros) - osnoise_hist_usage("no-index set and with-zeros not set - it does not make sense"); + if (params->common.hist.no_index && !params->common.hist.with_zeros) + fatal("no-index set and with-zeros not set - it does not make sense"); - return params; + return ¶ms->common; } /* * osnoise_hist_apply_config - apply the hist configs to the initialized tool */ static int -osnoise_hist_apply_config(struct osnoise_tool *tool, struct osnoise_hist_params *params) +osnoise_hist_apply_config(struct osnoise_tool *tool) { - int retval; - - if (!params->sleep_time) - params->sleep_time = 1; - - if (params->cpus) { - retval = osnoise_set_cpus(tool->context, params->cpus); - if (retval) { - err_msg("Failed to apply CPUs config\n"); - goto out_err; - } - } - - if (params->runtime || params->period) { - retval = osnoise_set_runtime_period(tool->context, - params->runtime, - params->period); - if (retval) { - err_msg("Failed to set runtime and/or period\n"); - goto out_err; - } - } - - if (params->stop_us) { - retval = osnoise_set_stop_us(tool->context, params->stop_us); - if (retval) { - err_msg("Failed to set stop us\n"); - goto out_err; - } - } - - if (params->stop_total_us) { - retval = osnoise_set_stop_total_us(tool->context, params->stop_total_us); - if (retval) { - err_msg("Failed to set stop total us\n"); - goto out_err; - } - } - - if (params->threshold) { - retval = osnoise_set_tracing_thresh(tool->context, params->threshold); - if (retval) { - err_msg("Failed to set tracing_thresh\n"); - goto out_err; - } - } - - if (params->hk_cpus) { - retval = sched_setaffinity(getpid(), sizeof(params->hk_cpu_set), - ¶ms->hk_cpu_set); - if (retval == -1) { - err_msg("Failed to set rtla to the house keeping CPUs\n"); - goto out_err; - } - } else if (params->cpus) { - /* - * Even if the user do not set a house-keeping CPU, try to - * move rtla to a CPU set different to the one where the user - * set the workload to run. - * - * No need to check results as this is an automatic attempt. - */ - auto_house_keeping(¶ms->monitored_cpus); - } - - return 0; - -out_err: - return -1; + return osnoise_apply_config(tool, to_osnoise_params(tool->params)); } /* * osnoise_init_hist - initialize a osnoise hist tool with parameters */ static struct osnoise_tool -*osnoise_init_hist(struct osnoise_hist_params *params) +*osnoise_init_hist(struct common_params *params) { struct osnoise_tool *tool; int nr_cpus; @@ -785,12 +707,11 @@ static struct osnoise_tool if (!tool) return NULL; - tool->data = osnoise_alloc_histogram(nr_cpus, params->entries, params->bucket_size); + tool->data = osnoise_alloc_histogram(nr_cpus, params->hist.entries, + params->hist.bucket_size); if (!tool->data) goto out_err; - tool->params = params; - return tool; out_err: @@ -798,148 +719,35 @@ out_err: return NULL; } -static int stop_tracing; -static void stop_hist(int sig) -{ - stop_tracing = 1; -} - -/* - * osnoise_hist_set_signals - handles the signal to stop the tool - */ -static void -osnoise_hist_set_signals(struct osnoise_hist_params *params) -{ - signal(SIGINT, stop_hist); - if (params->duration) { - signal(SIGALRM, stop_hist); - alarm(params->duration); - } -} - -int osnoise_hist_main(int argc, char *argv[]) +static int osnoise_hist_enable(struct osnoise_tool *tool) { - struct osnoise_hist_params *params; - struct osnoise_tool *record = NULL; - struct osnoise_tool *tool = NULL; - struct trace_instance *trace; - int return_value = 1; int retval; - params = osnoise_hist_parse_args(argc, argv); - if (!params) - exit(1); - - tool = osnoise_init_hist(params); - if (!tool) { - err_msg("Could not init osnoise hist\n"); - goto out_exit; - } - - retval = osnoise_hist_apply_config(tool, params); - if (retval) { - err_msg("Could not apply config\n"); - goto out_destroy; - } - - trace = &tool->trace; - - retval = enable_osnoise(trace); - if (retval) { - err_msg("Failed to enable osnoise tracer\n"); - goto out_destroy; - } - retval = osnoise_init_trace_hist(tool); if (retval) - goto out_destroy; + return retval; - if (params->set_sched) { - retval = set_comm_sched_attr("osnoise/", ¶ms->sched_param); - if (retval) { - err_msg("Failed to set sched parameters\n"); - goto out_free; - } - } - - if (params->cgroup) { - retval = set_comm_cgroup("timerlat/", params->cgroup_name); - if (!retval) { - err_msg("Failed to move threads to cgroup\n"); - goto out_free; - } - } - - if (params->trace_output) { - record = osnoise_init_trace_tool("osnoise"); - if (!record) { - err_msg("Failed to enable the trace instance\n"); - goto out_free; - } - - if (params->events) { - retval = trace_events_enable(&record->trace, params->events); - if (retval) - goto out_hist; - } - - } - - /* - * Start the tracer here, after having set all instances. - * - * Let the trace instance start first for the case of hitting a stop - * tracing while enabling other instances. The trace instance is the - * one with most valuable information. - */ - if (params->trace_output) - trace_instance_start(&record->trace); - trace_instance_start(trace); - - tool->start_time = time(NULL); - osnoise_hist_set_signals(params); - - while (!stop_tracing) { - sleep(params->sleep_time); - - retval = tracefs_iterate_raw_events(trace->tep, - trace->inst, - NULL, - 0, - collect_registered_events, - trace); - if (retval < 0) { - err_msg("Error iterating on events\n"); - goto out_hist; - } + return osnoise_enable(tool); +} - if (trace_is_off(&tool->trace, &record->trace)) - break; - } +static int osnoise_hist_main_loop(struct osnoise_tool *tool) +{ + int retval; + retval = hist_main_loop(tool); osnoise_read_trace_hist(tool); - osnoise_print_stats(params, tool); - - return_value = 0; - - if (trace_is_off(&tool->trace, &record->trace)) { - printf("rtla osnoise hit stop tracing\n"); - if (params->trace_output) { - printf(" Saving trace to %s\n", params->trace_output); - save_trace_to_file(record->trace.inst, params->trace_output); - } - } - -out_hist: - trace_events_destroy(&record->trace, params->events); - params->events = NULL; -out_free: - osnoise_free_histogram(tool->data); -out_destroy: - osnoise_destroy_tool(record); - osnoise_destroy_tool(tool); - free(params); -out_exit: - exit(return_value); + return retval; } + +struct tool_ops osnoise_hist_ops = { + .tracer = "osnoise", + .comm_prefix = "osnoise/", + .parse_args = osnoise_hist_parse_args, + .init_tool = osnoise_init_hist, + .apply_config = osnoise_hist_apply_config, + .enable = osnoise_hist_enable, + .main = osnoise_hist_main_loop, + .print_stats = osnoise_print_stats, + .free = osnoise_free_hist_tool, +}; diff --git a/tools/tracing/rtla/src/osnoise_top.c b/tools/tracing/rtla/src/osnoise_top.c index f7c959be8677..04c699bdd736 100644 --- a/tools/tracing/rtla/src/osnoise_top.c +++ b/tools/tracing/rtla/src/osnoise_top.c @@ -11,40 +11,8 @@ #include <unistd.h> #include <stdio.h> #include <time.h> -#include <sched.h> #include "osnoise.h" -#include "utils.h" - -enum osnoise_mode { - MODE_OSNOISE = 0, - MODE_HWNOISE -}; - -/* - * osnoise top parameters - */ -struct osnoise_top_params { - char *cpus; - cpu_set_t monitored_cpus; - char *trace_output; - char *cgroup_name; - unsigned long long runtime; - unsigned long long period; - long long threshold; - long long stop_us; - long long stop_total_us; - int sleep_time; - int duration; - int quiet; - int set_sched; - int cgroup; - int hk_cpus; - cpu_set_t hk_cpu_set; - struct sched_attr sched_param; - struct trace_events *events; - enum osnoise_mode mode; -}; struct osnoise_top_cpu { unsigned long long sum_runtime; @@ -69,13 +37,17 @@ struct osnoise_top_data { /* * osnoise_free_top - free runtime data */ -static void -osnoise_free_top(struct osnoise_top_data *data) +static void osnoise_free_top(struct osnoise_top_data *data) { free(data->cpu_data); free(data); } +static void osnoise_free_top_tool(struct osnoise_tool *tool) +{ + osnoise_free_top(tool->data); +} + /* * osnoise_alloc_histogram - alloc runtime data */ @@ -155,13 +127,16 @@ osnoise_top_handler(struct trace_seq *s, struct tep_record *record, */ static void osnoise_top_header(struct osnoise_tool *top) { - struct osnoise_top_params *params = top->params; + struct osnoise_params *params = to_osnoise_params(top->params); struct trace_seq *s = top->trace.seq; + bool pretty = params->common.pretty_output; char duration[26]; get_duration(top->start_time, duration, sizeof(duration)); - trace_seq_printf(s, "\033[2;37;40m"); + if (pretty) + trace_seq_printf(s, "\033[2;37;40m"); + trace_seq_printf(s, " "); if (params->mode == MODE_OSNOISE) { @@ -172,12 +147,16 @@ static void osnoise_top_header(struct osnoise_tool *top) } trace_seq_printf(s, " "); - trace_seq_printf(s, "\033[0;0;0m"); + + if (pretty) + trace_seq_printf(s, "\033[0;0;0m"); trace_seq_printf(s, "\n"); trace_seq_printf(s, "duration: %9s | time is in us\n", duration); - trace_seq_printf(s, "\033[2;30;47m"); + if (pretty) + trace_seq_printf(s, "\033[2;30;47m"); + trace_seq_printf(s, "CPU Period Runtime "); trace_seq_printf(s, " Noise "); trace_seq_printf(s, " %% CPU Aval "); @@ -190,7 +169,8 @@ static void osnoise_top_header(struct osnoise_tool *top) trace_seq_printf(s, " IRQ Softirq Thread"); eol: - trace_seq_printf(s, "\033[0;0;0m"); + if (pretty) + trace_seq_printf(s, "\033[0;0;0m"); trace_seq_printf(s, "\n"); } @@ -208,7 +188,7 @@ static void clear_terminal(struct trace_seq *seq) */ static void osnoise_top_print(struct osnoise_tool *tool, int cpu) { - struct osnoise_top_params *params = tool->params; + struct osnoise_params *params = to_osnoise_params(tool->params); struct trace_seq *s = tool->trace.seq; struct osnoise_top_cpu *cpu_data; struct osnoise_top_data *data; @@ -248,8 +228,9 @@ static void osnoise_top_print(struct osnoise_tool *tool, int cpu) * osnoise_print_stats - print data for all cpus */ static void -osnoise_print_stats(struct osnoise_top_params *params, struct osnoise_tool *top) +osnoise_print_stats(struct osnoise_tool *top) { + struct osnoise_params *params = to_osnoise_params(top->params); struct trace_instance *trace = &top->trace; static int nr_cpus = -1; int i; @@ -257,32 +238,31 @@ osnoise_print_stats(struct osnoise_top_params *params, struct osnoise_tool *top) if (nr_cpus == -1) nr_cpus = sysconf(_SC_NPROCESSORS_CONF); - if (!params->quiet) + if (!params->common.quiet) clear_terminal(trace->seq); osnoise_top_header(top); - for (i = 0; i < nr_cpus; i++) { - if (params->cpus && !CPU_ISSET(i, ¶ms->monitored_cpus)) - continue; + for_each_monitored_cpu(i, nr_cpus, ¶ms->common) { osnoise_top_print(top, i); } trace_seq_do_printf(trace->seq); trace_seq_reset(trace->seq); + osnoise_report_missed_events(top); } /* * osnoise_top_usage - prints osnoise top usage message */ -static void osnoise_top_usage(struct osnoise_top_params *params, char *usage) +static void osnoise_top_usage(struct osnoise_params *params) { int i; static const char * const msg[] = { " [-h] [-q] [-D] [-d s] [-a us] [-p us] [-r us] [-s us] [-S us] \\", - " [-T us] [-t[=file]] [-e sys[:event]] [--filter <filter>] [--trigger <trigger>] \\", - " [-c cpu-list] [-H cpu-list] [-P priority] [-C[=cgroup_name]]", + " [-T us] [-t [file]] [-e sys[:event]] [--filter <filter>] [--trigger <trigger>] \\", + " [-c cpu-list] [-H cpu-list] [-P priority] [-C [cgroup_name]] [--warm-up s]", "", " -h/--help: print this menu", " -a/--auto: set automatic trace mode, stopping the session if argument in us sample is hit", @@ -293,10 +273,10 @@ static void osnoise_top_usage(struct osnoise_top_params *params, char *usage) " -T/--threshold us: the minimum delta to be considered a noise", " -c/--cpus cpu-list: list of cpus to run osnoise threads", " -H/--house-keeping cpus: run rtla control threads only on the given cpus", - " -C/--cgroup[=cgroup_name]: set cgroup, if no cgroup_name is passed, the rtla's cgroup will be inherited", + " -C/--cgroup [cgroup_name]: set cgroup, if no cgroup_name is passed, the rtla's cgroup will be inherited", " -d/--duration time[s|m|h|d]: duration of the session", " -D/--debug: print debug info", - " -t/--trace[=file]: save the stopped trace to [file|osnoise_trace.txt]", + " -t/--trace [file]: save the stopped trace to [file|osnoise_trace.txt]", " -e/--event <sys:event>: enable the <sys:event> in the trace instance, multiple -e are allowed", " --filter <filter>: enable a trace event filter to the previous -e event", " --trigger <trigger>: enable a trace event trigger to the previous -e event", @@ -307,12 +287,13 @@ static void osnoise_top_usage(struct osnoise_top_params *params, char *usage) " f:prio - use SCHED_FIFO with prio", " d:runtime[us|ms|s]:period[us|ms|s] - use SCHED_DEADLINE with runtime and period", " in nanoseconds", + " --warm-up s: let the workload run for s seconds before collecting data", + " --trace-buffer-size kB: set the per-cpu trace buffer size in kB", + " --on-threshold <action>: define action to be executed at stop-total threshold, multiple are allowed", + " --on-end: define action to be executed at measurement end, multiple are allowed", NULL, }; - if (usage) - fprintf(stderr, "%s\n", usage); - if (params->mode == MODE_OSNOISE) { fprintf(stderr, "rtla osnoise top: a per-cpu summary of the OS noise (version %s)\n", @@ -331,23 +312,28 @@ static void osnoise_top_usage(struct osnoise_top_params *params, char *usage) for (i = 0; msg[i]; i++) fprintf(stderr, "%s\n", msg[i]); - exit(1); + + exit(EXIT_SUCCESS); } /* * osnoise_top_parse_args - allocs, parse and fill the cmd line parameters */ -struct osnoise_top_params *osnoise_top_parse_args(int argc, char **argv) +struct common_params *osnoise_top_parse_args(int argc, char **argv) { - struct osnoise_top_params *params; + struct osnoise_params *params; struct trace_events *tevent; int retval; int c; + char *trace_output = NULL; params = calloc(1, sizeof(*params)); if (!params) exit(1); + actions_init(¶ms->common.threshold_actions); + actions_init(¶ms->common.end_actions); + if (strcmp(argv[0], "hwnoise") == 0) { params->mode = MODE_HWNOISE; /* @@ -377,14 +363,15 @@ struct osnoise_top_params *osnoise_top_parse_args(int argc, char **argv) {"trace", optional_argument, 0, 't'}, {"trigger", required_argument, 0, '0'}, {"filter", required_argument, 0, '1'}, + {"warm-up", required_argument, 0, '2'}, + {"trace-buffer-size", required_argument, 0, '3'}, + {"on-threshold", required_argument, 0, '4'}, + {"on-end", required_argument, 0, '5'}, {0, 0, 0, 0} }; - /* getopt_long stores the option index here. */ - int option_index = 0; - - c = getopt_long(argc, argv, "a:c:C::d:De:hH:p:P:qr:s:S:t::T:0:1:", - long_options, &option_index); + c = getopt_long(argc, argv, "a:c:C::d:De:hH:p:P:qr:s:S:t::T:0:1:2:3:", + long_options, NULL); /* Detect the end of the options. */ if (c == -1) @@ -393,185 +380,149 @@ struct osnoise_top_params *osnoise_top_parse_args(int argc, char **argv) switch (c) { case 'a': /* set sample stop to auto_thresh */ - params->stop_us = get_llong_from_str(optarg); + params->common.stop_us = get_llong_from_str(optarg); /* set sample threshold to 1 */ params->threshold = 1; /* set trace */ - params->trace_output = "osnoise_trace.txt"; + if (!trace_output) + trace_output = "osnoise_trace.txt"; break; case 'c': - retval = parse_cpu_set(optarg, ¶ms->monitored_cpus); + retval = parse_cpu_set(optarg, ¶ms->common.monitored_cpus); if (retval) - osnoise_top_usage(params, "\nInvalid -c cpu list\n"); - params->cpus = optarg; + fatal("Invalid -c cpu list"); + params->common.cpus = optarg; break; case 'C': - params->cgroup = 1; - if (!optarg) { - /* will inherit this cgroup */ - params->cgroup_name = NULL; - } else if (*optarg == '=') { - /* skip the = */ - params->cgroup_name = ++optarg; - } + params->common.cgroup = 1; + params->common.cgroup_name = parse_optional_arg(argc, argv); break; case 'D': config_debug = 1; break; case 'd': - params->duration = parse_seconds_duration(optarg); - if (!params->duration) - osnoise_top_usage(params, "Invalid -D duration\n"); + params->common.duration = parse_seconds_duration(optarg); + if (!params->common.duration) + fatal("Invalid -d duration"); break; case 'e': tevent = trace_event_alloc(optarg); - if (!tevent) { - err_msg("Error alloc trace event"); - exit(EXIT_FAILURE); - } + if (!tevent) + fatal("Error alloc trace event"); - if (params->events) - tevent->next = params->events; - params->events = tevent; + if (params->common.events) + tevent->next = params->common.events; + params->common.events = tevent; break; case 'h': case '?': - osnoise_top_usage(params, NULL); + osnoise_top_usage(params); break; case 'H': - params->hk_cpus = 1; - retval = parse_cpu_set(optarg, ¶ms->hk_cpu_set); - if (retval) { - err_msg("Error parsing house keeping CPUs\n"); - exit(EXIT_FAILURE); - } + params->common.hk_cpus = 1; + retval = parse_cpu_set(optarg, ¶ms->common.hk_cpu_set); + if (retval) + fatal("Error parsing house keeping CPUs"); break; case 'p': params->period = get_llong_from_str(optarg); if (params->period > 10000000) - osnoise_top_usage(params, "Period longer than 10 s\n"); + fatal("Period longer than 10 s"); break; case 'P': - retval = parse_prio(optarg, ¶ms->sched_param); + retval = parse_prio(optarg, ¶ms->common.sched_param); if (retval == -1) - osnoise_top_usage(params, "Invalid -P priority"); - params->set_sched = 1; + fatal("Invalid -P priority"); + params->common.set_sched = 1; break; case 'q': - params->quiet = 1; + params->common.quiet = 1; break; case 'r': params->runtime = get_llong_from_str(optarg); if (params->runtime < 100) - osnoise_top_usage(params, "Runtime shorter than 100 us\n"); + fatal("Runtime shorter than 100 us"); break; case 's': - params->stop_us = get_llong_from_str(optarg); + params->common.stop_us = get_llong_from_str(optarg); break; case 'S': - params->stop_total_us = get_llong_from_str(optarg); + params->common.stop_total_us = get_llong_from_str(optarg); break; case 't': - if (optarg) - /* skip = */ - params->trace_output = &optarg[1]; - else - params->trace_output = "osnoise_trace.txt"; + trace_output = parse_optional_arg(argc, argv); + if (!trace_output) + trace_output = "osnoise_trace.txt"; break; case 'T': params->threshold = get_llong_from_str(optarg); break; case '0': /* trigger */ - if (params->events) { - retval = trace_event_add_trigger(params->events, optarg); - if (retval) { - err_msg("Error adding trigger %s\n", optarg); - exit(EXIT_FAILURE); - } + if (params->common.events) { + retval = trace_event_add_trigger(params->common.events, optarg); + if (retval) + fatal("Error adding trigger %s", optarg); } else { - osnoise_top_usage(params, "--trigger requires a previous -e\n"); + fatal("--trigger requires a previous -e"); } break; case '1': /* filter */ - if (params->events) { - retval = trace_event_add_filter(params->events, optarg); - if (retval) { - err_msg("Error adding filter %s\n", optarg); - exit(EXIT_FAILURE); - } + if (params->common.events) { + retval = trace_event_add_filter(params->common.events, optarg); + if (retval) + fatal("Error adding filter %s", optarg); } else { - osnoise_top_usage(params, "--filter requires a previous -e\n"); + fatal("--filter requires a previous -e"); } break; + case '2': + params->common.warmup = get_llong_from_str(optarg); + break; + case '3': + params->common.buffer_size = get_llong_from_str(optarg); + break; + case '4': + retval = actions_parse(¶ms->common.threshold_actions, optarg, + "osnoise_trace.txt"); + if (retval) + fatal("Invalid action %s", optarg); + break; + case '5': + retval = actions_parse(¶ms->common.end_actions, optarg, + "osnoise_trace.txt"); + if (retval) + fatal("Invalid action %s", optarg); + break; default: - osnoise_top_usage(params, "Invalid option"); + fatal("Invalid option"); } } - if (geteuid()) { - err_msg("osnoise needs root permission\n"); - exit(EXIT_FAILURE); - } + if (trace_output) + actions_add_trace_output(¶ms->common.threshold_actions, trace_output); + + if (geteuid()) + fatal("osnoise needs root permission"); - return params; + return ¶ms->common; } /* * osnoise_top_apply_config - apply the top configs to the initialized tool */ static int -osnoise_top_apply_config(struct osnoise_tool *tool, struct osnoise_top_params *params) +osnoise_top_apply_config(struct osnoise_tool *tool) { + struct osnoise_params *params = to_osnoise_params(tool->params); int retval; - if (!params->sleep_time) - params->sleep_time = 1; - - if (params->cpus) { - retval = osnoise_set_cpus(tool->context, params->cpus); - if (retval) { - err_msg("Failed to apply CPUs config\n"); - goto out_err; - } - } - - if (params->runtime || params->period) { - retval = osnoise_set_runtime_period(tool->context, - params->runtime, - params->period); - if (retval) { - err_msg("Failed to set runtime and/or period\n"); - goto out_err; - } - } - - if (params->stop_us) { - retval = osnoise_set_stop_us(tool->context, params->stop_us); - if (retval) { - err_msg("Failed to set stop us\n"); - goto out_err; - } - } - - if (params->stop_total_us) { - retval = osnoise_set_stop_total_us(tool->context, params->stop_total_us); - if (retval) { - err_msg("Failed to set stop total us\n"); - goto out_err; - } - } - - if (params->threshold) { - retval = osnoise_set_tracing_thresh(tool->context, params->threshold); - if (retval) { - err_msg("Failed to set tracing_thresh\n"); - goto out_err; - } - } + retval = osnoise_apply_config(tool, params); + if (retval) + goto out_err; if (params->mode == MODE_HWNOISE) { retval = osnoise_set_irq_disable(tool->context, 1); @@ -581,23 +532,8 @@ osnoise_top_apply_config(struct osnoise_tool *tool, struct osnoise_top_params *p } } - if (params->hk_cpus) { - retval = sched_setaffinity(getpid(), sizeof(params->hk_cpu_set), - ¶ms->hk_cpu_set); - if (retval == -1) { - err_msg("Failed to set rtla to the house keeping CPUs\n"); - goto out_err; - } - } else if (params->cpus) { - /* - * Even if the user do not set a house-keeping CPU, try to - * move rtla to a CPU set different to the one where the user - * set the workload to run. - * - * No need to check results as this is an automatic attempt. - */ - auto_house_keeping(¶ms->monitored_cpus); - } + if (isatty(STDOUT_FILENO) && !params->common.quiet) + params->common.pretty_output = 1; return 0; @@ -608,7 +544,7 @@ out_err: /* * osnoise_init_top - initialize a osnoise top tool with parameters */ -struct osnoise_tool *osnoise_init_top(struct osnoise_top_params *params) +struct osnoise_tool *osnoise_init_top(struct common_params *params) { struct osnoise_tool *tool; int nr_cpus; @@ -620,159 +556,25 @@ struct osnoise_tool *osnoise_init_top(struct osnoise_top_params *params) return NULL; tool->data = osnoise_alloc_top(nr_cpus); - if (!tool->data) - goto out_err; - - tool->params = params; + if (!tool->data) { + osnoise_destroy_tool(tool); + return NULL; + } tep_register_event_handler(tool->trace.tep, -1, "ftrace", "osnoise", osnoise_top_handler, NULL); return tool; - -out_err: - osnoise_free_top(tool->data); - osnoise_destroy_tool(tool); - return NULL; -} - -static int stop_tracing; -static void stop_top(int sig) -{ - stop_tracing = 1; -} - -/* - * osnoise_top_set_signals - handles the signal to stop the tool - */ -static void osnoise_top_set_signals(struct osnoise_top_params *params) -{ - signal(SIGINT, stop_top); - if (params->duration) { - signal(SIGALRM, stop_top); - alarm(params->duration); - } } -int osnoise_top_main(int argc, char **argv) -{ - struct osnoise_top_params *params; - struct osnoise_tool *record = NULL; - struct osnoise_tool *tool = NULL; - struct trace_instance *trace; - int return_value = 1; - int retval; - - params = osnoise_top_parse_args(argc, argv); - if (!params) - exit(1); - - tool = osnoise_init_top(params); - if (!tool) { - err_msg("Could not init osnoise top\n"); - goto out_exit; - } - - retval = osnoise_top_apply_config(tool, params); - if (retval) { - err_msg("Could not apply config\n"); - goto out_free; - } - - trace = &tool->trace; - - retval = enable_osnoise(trace); - if (retval) { - err_msg("Failed to enable osnoise tracer\n"); - goto out_free; - } - - if (params->set_sched) { - retval = set_comm_sched_attr("osnoise/", ¶ms->sched_param); - if (retval) { - err_msg("Failed to set sched parameters\n"); - goto out_free; - } - } - - if (params->cgroup) { - retval = set_comm_cgroup("osnoise/", params->cgroup_name); - if (!retval) { - err_msg("Failed to move threads to cgroup\n"); - goto out_free; - } - } - - if (params->trace_output) { - record = osnoise_init_trace_tool("osnoise"); - if (!record) { - err_msg("Failed to enable the trace instance\n"); - goto out_free; - } - - if (params->events) { - retval = trace_events_enable(&record->trace, params->events); - if (retval) - goto out_top; - } - } - - /* - * Start the tracer here, after having set all instances. - * - * Let the trace instance start first for the case of hitting a stop - * tracing while enabling other instances. The trace instance is the - * one with most valuable information. - */ - if (params->trace_output) - trace_instance_start(&record->trace); - trace_instance_start(trace); - - tool->start_time = time(NULL); - osnoise_top_set_signals(params); - - while (!stop_tracing) { - sleep(params->sleep_time); - - retval = tracefs_iterate_raw_events(trace->tep, - trace->inst, - NULL, - 0, - collect_registered_events, - trace); - if (retval < 0) { - err_msg("Error iterating on events\n"); - goto out_top; - } - - if (!params->quiet) - osnoise_print_stats(params, tool); - - if (trace_is_off(&tool->trace, &record->trace)) - break; - - } - - osnoise_print_stats(params, tool); - - return_value = 0; - - if (trace_is_off(&tool->trace, &record->trace)) { - printf("osnoise hit stop tracing\n"); - if (params->trace_output) { - printf(" Saving trace to %s\n", params->trace_output); - save_trace_to_file(record->trace.inst, params->trace_output); - } - } - -out_top: - trace_events_destroy(&record->trace, params->events); - params->events = NULL; -out_free: - osnoise_free_top(tool->data); - osnoise_destroy_tool(record); - osnoise_destroy_tool(tool); - free(params); -out_exit: - exit(return_value); -} +struct tool_ops osnoise_top_ops = { + .tracer = "osnoise", + .comm_prefix = "osnoise/", + .parse_args = osnoise_top_parse_args, + .init_tool = osnoise_init_top, + .apply_config = osnoise_top_apply_config, + .enable = osnoise_enable, + .main = top_main_loop, + .print_stats = osnoise_print_stats, + .free = osnoise_free_top_tool, +}; diff --git a/tools/tracing/rtla/src/timerlat.bpf.c b/tools/tracing/rtla/src/timerlat.bpf.c new file mode 100644 index 000000000000..e2265b5d6491 --- /dev/null +++ b/tools/tracing/rtla/src/timerlat.bpf.c @@ -0,0 +1,157 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/bpf.h> +#include <bpf/bpf_tracing.h> +#include <stdbool.h> +#include "timerlat_bpf.h" + +#define nosubprog __always_inline +#define MAX_ENTRIES_DEFAULT 4096 + +char LICENSE[] SEC("license") = "GPL"; + +struct trace_event_raw_timerlat_sample { + unsigned long long timer_latency; + int context; +} __attribute__((preserve_access_index)); + +struct { + __uint(type, BPF_MAP_TYPE_PERCPU_ARRAY); + __uint(max_entries, MAX_ENTRIES_DEFAULT); + __type(key, unsigned int); + __type(value, unsigned long long); +} hist_irq SEC(".maps"), hist_thread SEC(".maps"), hist_user SEC(".maps"); + +struct { + __uint(type, BPF_MAP_TYPE_PERCPU_ARRAY); + __uint(max_entries, SUMMARY_FIELD_N); + __type(key, unsigned int); + __type(value, unsigned long long); +} summary_irq SEC(".maps"), summary_thread SEC(".maps"), summary_user SEC(".maps"); + +struct { + __uint(type, BPF_MAP_TYPE_ARRAY); + __uint(max_entries, 1); + __type(key, unsigned int); + __type(value, unsigned long long); +} stop_tracing SEC(".maps"); + +struct { + __uint(type, BPF_MAP_TYPE_RINGBUF); + __uint(max_entries, 1); +} signal_stop_tracing SEC(".maps"); + +/* Params to be set by rtla */ +const volatile int bucket_size = 1; +const volatile int output_divisor = 1000; +const volatile int entries = 256; +const volatile int irq_threshold; +const volatile int thread_threshold; +const volatile bool aa_only; + +nosubprog unsigned long long map_get(void *map, + unsigned int key) +{ + unsigned long long *value_ptr; + + value_ptr = bpf_map_lookup_elem(map, &key); + + return !value_ptr ? 0 : *value_ptr; +} + +nosubprog void map_set(void *map, + unsigned int key, + unsigned long long value) +{ + bpf_map_update_elem(map, &key, &value, BPF_ANY); +} + +nosubprog void map_increment(void *map, + unsigned int key) +{ + map_set(map, key, map_get(map, key) + 1); +} + +nosubprog void update_main_hist(void *map, + int bucket) +{ + if (entries == 0) + /* No histogram */ + return; + + if (bucket >= entries) + /* Overflow */ + return; + + map_increment(map, bucket); +} + +nosubprog void update_summary(void *map, + unsigned long long latency, + int bucket) +{ + if (aa_only) + /* Auto-analysis only, nothing to be done here */ + return; + + map_set(map, SUMMARY_CURRENT, latency); + + if (bucket >= entries) + /* Overflow */ + map_increment(map, SUMMARY_OVERFLOW); + + if (latency > map_get(map, SUMMARY_MAX)) + map_set(map, SUMMARY_MAX, latency); + + if (latency < map_get(map, SUMMARY_MIN) || map_get(map, SUMMARY_COUNT) == 0) + map_set(map, SUMMARY_MIN, latency); + + map_increment(map, SUMMARY_COUNT); + map_set(map, SUMMARY_SUM, map_get(map, SUMMARY_SUM) + latency); +} + +nosubprog void set_stop_tracing(void) +{ + int value = 0; + + /* Suppress further sample processing */ + map_set(&stop_tracing, 0, 1); + + /* Signal to userspace */ + bpf_ringbuf_output(&signal_stop_tracing, &value, sizeof(value), 0); +} + +SEC("tp/osnoise/timerlat_sample") +int handle_timerlat_sample(struct trace_event_raw_timerlat_sample *tp_args) +{ + unsigned long long latency, latency_us; + int bucket; + + if (map_get(&stop_tracing, 0)) + return 0; + + latency = tp_args->timer_latency / output_divisor; + latency_us = tp_args->timer_latency / 1000; + bucket = latency / bucket_size; + + if (tp_args->context == 0) { + update_main_hist(&hist_irq, bucket); + update_summary(&summary_irq, latency, bucket); + + if (irq_threshold != 0 && latency_us >= irq_threshold) + set_stop_tracing(); + } else if (tp_args->context == 1) { + update_main_hist(&hist_thread, bucket); + update_summary(&summary_thread, latency, bucket); + + if (thread_threshold != 0 && latency_us >= thread_threshold) + set_stop_tracing(); + } else { + update_main_hist(&hist_user, bucket); + update_summary(&summary_user, latency, bucket); + + if (thread_threshold != 0 && latency_us >= thread_threshold) + set_stop_tracing(); + } + + return 0; +} diff --git a/tools/tracing/rtla/src/timerlat.c b/tools/tracing/rtla/src/timerlat.c index 21cdcc5c4a29..df4f9bfe3433 100644 --- a/tools/tracing/rtla/src/timerlat.c +++ b/tools/tracing/rtla/src/timerlat.c @@ -2,6 +2,7 @@ /* * Copyright (C) 2021 Red Hat Inc, Daniel Bristot de Oliveira <bristot@kernel.org> */ +#define _GNU_SOURCE #include <sys/types.h> #include <sys/stat.h> #include <pthread.h> @@ -11,8 +12,225 @@ #include <errno.h> #include <fcntl.h> #include <stdio.h> +#include <sched.h> #include "timerlat.h" +#include "timerlat_aa.h" +#include "timerlat_bpf.h" + +#define DEFAULT_TIMERLAT_PERIOD 1000 /* 1ms */ + +static int dma_latency_fd = -1; + +/* + * timerlat_apply_config - apply common configs to the initialized tool + */ +int +timerlat_apply_config(struct osnoise_tool *tool, struct timerlat_params *params) +{ + int retval; + + /* + * Try to enable BPF, unless disabled explicitly. + * If BPF enablement fails, fall back to tracefs mode. + */ + if (getenv("RTLA_NO_BPF") && strncmp(getenv("RTLA_NO_BPF"), "1", 2) == 0) { + debug_msg("RTLA_NO_BPF set, disabling BPF\n"); + params->mode = TRACING_MODE_TRACEFS; + } else if (!tep_find_event_by_name(tool->trace.tep, "osnoise", "timerlat_sample")) { + debug_msg("osnoise:timerlat_sample missing, disabling BPF\n"); + params->mode = TRACING_MODE_TRACEFS; + } else { + retval = timerlat_bpf_init(params); + if (retval) { + debug_msg("Could not enable BPF\n"); + params->mode = TRACING_MODE_TRACEFS; + } + } + + if (params->mode != TRACING_MODE_BPF) { + /* + * In tracefs and mixed mode, timerlat tracer handles stopping + * on threshold + */ + retval = osnoise_set_stop_us(tool->context, params->common.stop_us); + if (retval) { + err_msg("Failed to set stop us\n"); + goto out_err; + } + + retval = osnoise_set_stop_total_us(tool->context, params->common.stop_total_us); + if (retval) { + err_msg("Failed to set stop total us\n"); + goto out_err; + } + } + + + retval = osnoise_set_timerlat_period_us(tool->context, + params->timerlat_period_us ? + params->timerlat_period_us : + DEFAULT_TIMERLAT_PERIOD); + if (retval) { + err_msg("Failed to set timerlat period\n"); + goto out_err; + } + + + retval = osnoise_set_print_stack(tool->context, params->print_stack); + if (retval) { + err_msg("Failed to set print stack\n"); + goto out_err; + } + + /* + * If the user did not specify a type of thread, try user-threads first. + * Fall back to kernel threads otherwise. + */ + if (!params->common.kernel_workload && !params->common.user_data) { + retval = tracefs_file_exists(NULL, "osnoise/per_cpu/cpu0/timerlat_fd"); + if (retval) { + debug_msg("User-space interface detected, setting user-threads\n"); + params->common.user_workload = 1; + params->common.user_data = 1; + } else { + debug_msg("User-space interface not detected, setting kernel-threads\n"); + params->common.kernel_workload = 1; + } + } + + return common_apply_config(tool, ¶ms->common); + +out_err: + return -1; +} + +int timerlat_enable(struct osnoise_tool *tool) +{ + struct timerlat_params *params = to_timerlat_params(tool->params); + int retval, nr_cpus, i; + + if (params->dma_latency >= 0) { + dma_latency_fd = set_cpu_dma_latency(params->dma_latency); + if (dma_latency_fd < 0) { + err_msg("Could not set /dev/cpu_dma_latency.\n"); + return -1; + } + } + + if (params->deepest_idle_state >= -1) { + if (!have_libcpupower_support()) { + err_msg("rtla built without libcpupower, --deepest-idle-state is not supported\n"); + return -1; + } + + nr_cpus = sysconf(_SC_NPROCESSORS_CONF); + + for_each_monitored_cpu(i, nr_cpus, ¶ms->common) { + if (save_cpu_idle_disable_state(i) < 0) { + err_msg("Could not save cpu idle state.\n"); + return -1; + } + if (set_deepest_cpu_idle_state(i, params->deepest_idle_state) < 0) { + err_msg("Could not set deepest cpu idle state.\n"); + return -1; + } + } + } + + if (!params->no_aa) { + tool->aa = osnoise_init_tool("timerlat_aa"); + if (!tool->aa) + return -1; + + retval = timerlat_aa_init(tool->aa, params->dump_tasks); + if (retval) { + err_msg("Failed to enable the auto analysis instance\n"); + return retval; + } + + retval = enable_tracer_by_name(tool->aa->trace.inst, "timerlat"); + if (retval) { + err_msg("Failed to enable aa tracer\n"); + return retval; + } + } + + if (params->common.warmup > 0) { + debug_msg("Warming up for %d seconds\n", params->common.warmup); + sleep(params->common.warmup); + if (stop_tracing) + return -1; + } + + /* + * Start the tracers here, after having set all instances. + * + * Let the trace instance start first for the case of hitting a stop + * tracing while enabling other instances. The trace instance is the + * one with most valuable information. + */ + if (tool->record) + trace_instance_start(&tool->record->trace); + if (!params->no_aa) + trace_instance_start(&tool->aa->trace); + if (params->mode == TRACING_MODE_TRACEFS) { + trace_instance_start(&tool->trace); + } else { + retval = timerlat_bpf_attach(); + if (retval) { + err_msg("Error attaching BPF program\n"); + return retval; + } + } + + return 0; +} + +void timerlat_analyze(struct osnoise_tool *tool, bool stopped) +{ + struct timerlat_params *params = to_timerlat_params(tool->params); + + if (stopped) { + if (!params->no_aa) + timerlat_auto_analysis(params->common.stop_us, + params->common.stop_total_us); + } else if (params->common.aa_only) { + char *max_lat; + + /* + * If the trace did not stop with --aa-only, at least print + * the max known latency. + */ + max_lat = tracefs_instance_file_read(trace_inst->inst, "tracing_max_latency", NULL); + if (max_lat) { + printf(" Max latency was %s\n", max_lat); + free(max_lat); + } + } +} + +void timerlat_free(struct osnoise_tool *tool) +{ + struct timerlat_params *params = to_timerlat_params(tool->params); + int nr_cpus = sysconf(_SC_NPROCESSORS_CONF); + int i; + + timerlat_aa_destroy(); + if (dma_latency_fd >= 0) + close(dma_latency_fd); + if (params->deepest_idle_state >= -1) { + for_each_monitored_cpu(i, nr_cpus, ¶ms->common) { + restore_cpu_idle_disable_state(i); + } + } + + osnoise_destroy_tool(tool->aa); + + if (params->mode != TRACING_MODE_TRACEFS) + timerlat_bpf_destroy(); + free_cpu_idle_disable_states(); +} static void timerlat_usage(int err) { @@ -47,7 +265,7 @@ int timerlat_main(int argc, char *argv[]) * default cmdline. */ if (argc == 1) { - timerlat_top_main(argc, argv); + run_tool(&timerlat_top_ops, argc, argv); exit(0); } @@ -55,13 +273,13 @@ int timerlat_main(int argc, char *argv[]) timerlat_usage(0); } else if (strncmp(argv[1], "-", 1) == 0) { /* the user skipped the tool, call the default one */ - timerlat_top_main(argc, argv); + run_tool(&timerlat_top_ops, argc, argv); exit(0); } else if (strcmp(argv[1], "top") == 0) { - timerlat_top_main(argc-1, &argv[1]); + run_tool(&timerlat_top_ops, argc-1, &argv[1]); exit(0); } else if (strcmp(argv[1], "hist") == 0) { - timerlat_hist_main(argc-1, &argv[1]); + run_tool(&timerlat_hist_ops, argc-1, &argv[1]); exit(0); } diff --git a/tools/tracing/rtla/src/timerlat.h b/tools/tracing/rtla/src/timerlat.h index 88561bfd14f3..fd6065f48bb7 100644 --- a/tools/tracing/rtla/src/timerlat.h +++ b/tools/tracing/rtla/src/timerlat.h @@ -1,4 +1,39 @@ // SPDX-License-Identifier: GPL-2.0 -int timerlat_hist_main(int argc, char *argv[]); -int timerlat_top_main(int argc, char *argv[]); +#include "osnoise.h" + +/* + * Define timerlat tracing mode. + * + * There are three tracing modes: + * - tracefs-only, used when BPF is unavailable. + * - BPF-only, used when BPF is available and neither trace saving nor + * auto-analysis are enabled. + * - mixed mode, used when BPF is available and either trace saving or + * auto-analysis is enabled (which rely on sample collection through + * tracefs). + */ +enum timerlat_tracing_mode { + TRACING_MODE_BPF, + TRACING_MODE_TRACEFS, + TRACING_MODE_MIXED, +}; + +struct timerlat_params { + struct common_params common; + long long timerlat_period_us; + long long print_stack; + int dma_latency; + int no_aa; + int dump_tasks; + int deepest_idle_state; + enum timerlat_tracing_mode mode; +}; + +#define to_timerlat_params(ptr) container_of(ptr, struct timerlat_params, common) + +int timerlat_apply_config(struct osnoise_tool *tool, struct timerlat_params *params); int timerlat_main(int argc, char *argv[]); +int timerlat_enable(struct osnoise_tool *tool); +void timerlat_analyze(struct osnoise_tool *tool, bool stopped); +void timerlat_free(struct osnoise_tool *tool); + diff --git a/tools/tracing/rtla/src/timerlat_aa.c b/tools/tracing/rtla/src/timerlat_aa.c index e0ffe69c271c..31e66ea2b144 100644 --- a/tools/tracing/rtla/src/timerlat_aa.c +++ b/tools/tracing/rtla/src/timerlat_aa.c @@ -5,8 +5,6 @@ #include <stdlib.h> #include <errno.h> -#include "utils.h" -#include "osnoise.h" #include "timerlat.h" #include <unistd.h> @@ -16,6 +14,9 @@ enum timelat_state { TIMERLAT_WAITING_THREAD, }; +/* Used to fill spaces in the output */ +static const char *spaces = " "; + #define MAX_COMM 24 /* @@ -159,6 +160,7 @@ static int timerlat_aa_irq_latency(struct timerlat_aa_data *taa_data, taa_data->thread_nmi_sum = 0; taa_data->thread_irq_sum = 0; taa_data->thread_softirq_sum = 0; + taa_data->thread_thread_sum = 0; taa_data->thread_blocking_duration = 0; taa_data->timer_irq_start_time = 0; taa_data->timer_irq_duration = 0; @@ -273,14 +275,17 @@ static int timerlat_aa_nmi_handler(struct trace_seq *s, struct tep_record *recor taa_data->prev_irq_timstamp = start; trace_seq_reset(taa_data->prev_irqs_seq); - trace_seq_printf(taa_data->prev_irqs_seq, "\t%24s \t\t\t%9.2f us\n", - "nmi", ns_to_usf(duration)); + trace_seq_printf(taa_data->prev_irqs_seq, " %24s %.*s %9.2f us\n", + "nmi", + 24, spaces, + ns_to_usf(duration)); return 0; } taa_data->thread_nmi_sum += duration; - trace_seq_printf(taa_data->nmi_seq, " %24s \t\t\t%9.2f us\n", - "nmi", ns_to_usf(duration)); + trace_seq_printf(taa_data->nmi_seq, " %24s %.*s %9.2f us\n", + "nmi", + 24, spaces, ns_to_usf(duration)); return 0; } @@ -322,8 +327,10 @@ static int timerlat_aa_irq_handler(struct trace_seq *s, struct tep_record *recor taa_data->prev_irq_timstamp = start; trace_seq_reset(taa_data->prev_irqs_seq); - trace_seq_printf(taa_data->prev_irqs_seq, "\t%24s:%-3llu \t\t%9.2f us\n", - desc, vector, ns_to_usf(duration)); + trace_seq_printf(taa_data->prev_irqs_seq, " %24s:%-3llu %.*s %9.2f us\n", + desc, vector, + 15, spaces, + ns_to_usf(duration)); return 0; } @@ -337,7 +344,23 @@ static int timerlat_aa_irq_handler(struct trace_seq *s, struct tep_record *recor taa_data->timer_irq_start_time = start; taa_data->timer_irq_duration = duration; - taa_data->timer_irq_start_delay = taa_data->timer_irq_start_time - expected_start; + /* + * We are dealing with two different clock sources: the + * external clock source that timerlat uses as a reference + * and the clock used by the tracer. There are also two + * moments: the time reading the clock and the timer in + * which the event is placed in the buffer (the trace + * event timestamp). If the processor is slow or there + * is some hardware noise, the difference between the + * timestamp and the external clock read can be longer + * than the IRQ handler delay, resulting in a negative + * time. If so, set IRQ start delay as 0. In the end, + * it is less relevant than the noise. + */ + if (expected_start < taa_data->timer_irq_start_time) + taa_data->timer_irq_start_delay = taa_data->timer_irq_start_time - expected_start; + else + taa_data->timer_irq_start_delay = 0; /* * not exit from idle. @@ -355,8 +378,10 @@ static int timerlat_aa_irq_handler(struct trace_seq *s, struct tep_record *recor * IRQ interference. */ taa_data->thread_irq_sum += duration; - trace_seq_printf(taa_data->irqs_seq, " %24s:%-3llu \t %9.2f us\n", - desc, vector, ns_to_usf(duration)); + trace_seq_printf(taa_data->irqs_seq, " %24s:%-3llu %.*s %9.2f us\n", + desc, vector, + 24, spaces, + ns_to_usf(duration)); return 0; } @@ -391,8 +416,10 @@ static int timerlat_aa_softirq_handler(struct trace_seq *s, struct tep_record *r taa_data->thread_softirq_sum += duration; - trace_seq_printf(taa_data->softirqs_seq, "\t%24s:%-3llu \t %9.2f us\n", - softirq_name[vector], vector, ns_to_usf(duration)); + trace_seq_printf(taa_data->softirqs_seq, " %24s:%-3llu %.*s %9.2f us\n", + softirq_name[vector], vector, + 24, spaces, + ns_to_usf(duration)); return 0; } @@ -435,8 +462,10 @@ static int timerlat_aa_thread_handler(struct trace_seq *s, struct tep_record *re } else { taa_data->thread_thread_sum += duration; - trace_seq_printf(taa_data->threads_seq, "\t%24s:%-3llu \t\t%9.2f us\n", - comm, pid, ns_to_usf(duration)); + trace_seq_printf(taa_data->threads_seq, " %24s:%-12llu %.*s %9.2f us\n", + comm, pid, + 15, spaces, + ns_to_usf(duration)); } return 0; @@ -465,7 +494,8 @@ static int timerlat_aa_stack_handler(struct trace_seq *s, struct tep_record *rec function = tep_find_function(taa_ctx->tool->trace.tep, caller[i]); if (!function) break; - trace_seq_printf(taa_data->stack_seq, "\t\t-> %s\n", function); + trace_seq_printf(taa_data->stack_seq, " %.*s -> %s\n", + 14, spaces, function); } } return 0; @@ -528,7 +558,7 @@ static int timerlat_aa_kworker_start_handler(struct trace_seq *s, struct tep_rec static void timerlat_thread_analysis(struct timerlat_aa_data *taa_data, int cpu, int irq_thresh, int thread_thresh) { - unsigned long long exp_irq_ts; + long long exp_irq_ts; int total; int irq; @@ -545,26 +575,30 @@ static void timerlat_thread_analysis(struct timerlat_aa_data *taa_data, int cpu, /* * Expected IRQ arrival time using the trace clock as the base. + * + * TODO: Add a list of previous IRQ, and then run the list backwards. */ exp_irq_ts = taa_data->timer_irq_start_time - taa_data->timer_irq_start_delay; - - if (exp_irq_ts < taa_data->prev_irq_timstamp + taa_data->prev_irq_duration) - printf(" Previous IRQ interference: \t\t up to %9.2f us\n", - ns_to_usf(taa_data->prev_irq_duration)); + if (exp_irq_ts < taa_data->prev_irq_timstamp + taa_data->prev_irq_duration) { + if (taa_data->prev_irq_timstamp < taa_data->timer_irq_start_time) + printf(" Previous IRQ interference: %.*s up to %9.2f us\n", + 16, spaces, + ns_to_usf(taa_data->prev_irq_duration)); + } /* * The delay that the IRQ suffered before starting. */ - printf(" IRQ handler delay: %16s %9.2f us (%.2f %%)\n", - (ns_to_usf(taa_data->timer_exit_from_idle) > 10) ? "(exit from idle)" : "", - ns_to_usf(taa_data->timer_irq_start_delay), - ns_to_per(total, taa_data->timer_irq_start_delay)); + printf(" IRQ handler delay: %.*s %16s %9.2f us (%.2f %%)\n", 16, spaces, + (ns_to_usf(taa_data->timer_exit_from_idle) > 10) ? "(exit from idle)" : "", + ns_to_usf(taa_data->timer_irq_start_delay), + ns_to_per(total, taa_data->timer_irq_start_delay)); /* * Timerlat IRQ. */ - printf(" IRQ latency: \t\t\t\t %9.2f us\n", - ns_to_usf(taa_data->tlat_irq_latency)); + printf(" IRQ latency: %.*s %9.2f us\n", 40, spaces, + ns_to_usf(taa_data->tlat_irq_latency)); if (irq) { /* @@ -575,15 +609,16 @@ static void timerlat_thread_analysis(struct timerlat_aa_data *taa_data, int cpu, * so it will be displayed, it is the key. */ printf(" Blocking thread:\n"); - printf(" %24s:%-9llu\n", - taa_data->run_thread_comm, taa_data->run_thread_pid); + printf(" %.*s %24s:%-9llu\n", 6, spaces, taa_data->run_thread_comm, + taa_data->run_thread_pid); } else { /* * The duration of the IRQ handler that handled the timerlat IRQ. */ - printf(" Timerlat IRQ duration: \t\t %9.2f us (%.2f %%)\n", - ns_to_usf(taa_data->timer_irq_duration), - ns_to_per(total, taa_data->timer_irq_duration)); + printf(" Timerlat IRQ duration: %.*s %9.2f us (%.2f %%)\n", + 30, spaces, + ns_to_usf(taa_data->timer_irq_duration), + ns_to_per(total, taa_data->timer_irq_duration)); /* * The amount of time that the current thread postponed the scheduler. @@ -591,13 +626,13 @@ static void timerlat_thread_analysis(struct timerlat_aa_data *taa_data, int cpu, * Recalling that it is net from NMI/IRQ/Softirq interference, so there * is no need to compute values here. */ - printf(" Blocking thread: \t\t\t %9.2f us (%.2f %%)\n", - ns_to_usf(taa_data->thread_blocking_duration), - ns_to_per(total, taa_data->thread_blocking_duration)); + printf(" Blocking thread: %.*s %9.2f us (%.2f %%)\n", 36, spaces, + ns_to_usf(taa_data->thread_blocking_duration), + ns_to_per(total, taa_data->thread_blocking_duration)); - printf(" %24s:%-9llu %9.2f us\n", - taa_data->run_thread_comm, taa_data->run_thread_pid, - ns_to_usf(taa_data->thread_blocking_duration)); + printf(" %.*s %24s:%-9llu %.*s %9.2f us\n", 6, spaces, + taa_data->run_thread_comm, taa_data->run_thread_pid, + 12, spaces, ns_to_usf(taa_data->thread_blocking_duration)); } /* @@ -609,9 +644,9 @@ static void timerlat_thread_analysis(struct timerlat_aa_data *taa_data, int cpu, * NMIs can happen during the IRQ, so they are always possible. */ if (taa_data->thread_nmi_sum) - printf(" NMI interference \t\t\t %9.2f us (%.2f %%)\n", - ns_to_usf(taa_data->thread_nmi_sum), - ns_to_per(total, taa_data->thread_nmi_sum)); + printf(" NMI interference %.*s %9.2f us (%.2f %%)\n", 36, spaces, + ns_to_usf(taa_data->thread_nmi_sum), + ns_to_per(total, taa_data->thread_nmi_sum)); /* * If it is an IRQ latency, the other factors can be skipped. @@ -623,9 +658,9 @@ static void timerlat_thread_analysis(struct timerlat_aa_data *taa_data, int cpu, * Prints the interference caused by IRQs to the thread latency. */ if (taa_data->thread_irq_sum) { - printf(" IRQ interference \t\t\t %9.2f us (%.2f %%)\n", - ns_to_usf(taa_data->thread_irq_sum), - ns_to_per(total, taa_data->thread_irq_sum)); + printf(" IRQ interference %.*s %9.2f us (%.2f %%)\n", 36, spaces, + ns_to_usf(taa_data->thread_irq_sum), + ns_to_per(total, taa_data->thread_irq_sum)); trace_seq_do_printf(taa_data->irqs_seq); } @@ -634,9 +669,9 @@ static void timerlat_thread_analysis(struct timerlat_aa_data *taa_data, int cpu, * Prints the interference caused by Softirqs to the thread latency. */ if (taa_data->thread_softirq_sum) { - printf(" Softirq interference \t\t\t %9.2f us (%.2f %%)\n", - ns_to_usf(taa_data->thread_softirq_sum), - ns_to_per(total, taa_data->thread_softirq_sum)); + printf(" Softirq interference %.*s %9.2f us (%.2f %%)\n", 32, spaces, + ns_to_usf(taa_data->thread_softirq_sum), + ns_to_per(total, taa_data->thread_softirq_sum)); trace_seq_do_printf(taa_data->softirqs_seq); } @@ -650,9 +685,9 @@ static void timerlat_thread_analysis(struct timerlat_aa_data *taa_data, int cpu, * timer handling latency. */ if (taa_data->thread_thread_sum) { - printf(" Thread interference \t\t\t %9.2f us (%.2f %%)\n", - ns_to_usf(taa_data->thread_thread_sum), - ns_to_per(total, taa_data->thread_thread_sum)); + printf(" Thread interference %.*s %9.2f us (%.2f %%)\n", 33, spaces, + ns_to_usf(taa_data->thread_thread_sum), + ns_to_per(total, taa_data->thread_thread_sum)); trace_seq_do_printf(taa_data->threads_seq); } @@ -662,8 +697,8 @@ static void timerlat_thread_analysis(struct timerlat_aa_data *taa_data, int cpu, */ print_total: printf("------------------------------------------------------------------------\n"); - printf(" %s latency: \t\t\t %9.2f us (100%%)\n", irq ? "IRQ" : "Thread", - ns_to_usf(total)); + printf(" %s latency: %.*s %9.2f us (100%%)\n", irq ? " IRQ" : "Thread", + 37, spaces, ns_to_usf(total)); } static int timerlat_auto_analysis_collect_trace(struct timerlat_aa_context *taa_ctx) diff --git a/tools/tracing/rtla/src/timerlat_bpf.c b/tools/tracing/rtla/src/timerlat_bpf.c new file mode 100644 index 000000000000..e97d16646bcd --- /dev/null +++ b/tools/tracing/rtla/src/timerlat_bpf.c @@ -0,0 +1,180 @@ +// SPDX-License-Identifier: GPL-2.0 +#ifdef HAVE_BPF_SKEL +#define _GNU_SOURCE +#include "timerlat.h" +#include "timerlat_bpf.h" +#include "timerlat.skel.h" + +static struct timerlat_bpf *bpf; + +/* + * timerlat_bpf_init - load and initialize BPF program to collect timerlat data + */ +int timerlat_bpf_init(struct timerlat_params *params) +{ + int err; + + debug_msg("Loading BPF program\n"); + + bpf = timerlat_bpf__open(); + if (!bpf) + return 1; + + /* Pass common options */ + bpf->rodata->output_divisor = params->common.output_divisor; + bpf->rodata->entries = params->common.hist.entries; + bpf->rodata->irq_threshold = params->common.stop_us; + bpf->rodata->thread_threshold = params->common.stop_total_us; + bpf->rodata->aa_only = params->common.aa_only; + + if (params->common.hist.entries != 0) { + /* Pass histogram options */ + bpf->rodata->bucket_size = params->common.hist.bucket_size; + + /* Set histogram array sizes */ + bpf_map__set_max_entries(bpf->maps.hist_irq, params->common.hist.entries); + bpf_map__set_max_entries(bpf->maps.hist_thread, params->common.hist.entries); + bpf_map__set_max_entries(bpf->maps.hist_user, params->common.hist.entries); + } else { + /* No entries, disable histogram */ + bpf_map__set_autocreate(bpf->maps.hist_irq, false); + bpf_map__set_autocreate(bpf->maps.hist_thread, false); + bpf_map__set_autocreate(bpf->maps.hist_user, false); + } + + if (params->common.aa_only) { + /* Auto-analysis only, disable summary */ + bpf_map__set_autocreate(bpf->maps.summary_irq, false); + bpf_map__set_autocreate(bpf->maps.summary_thread, false); + bpf_map__set_autocreate(bpf->maps.summary_user, false); + } + + /* Load and verify BPF program */ + err = timerlat_bpf__load(bpf); + if (err) { + timerlat_bpf__destroy(bpf); + return err; + } + + return 0; +} + +/* + * timerlat_bpf_attach - attach BPF program to collect timerlat data + */ +int timerlat_bpf_attach(void) +{ + debug_msg("Attaching BPF program\n"); + + return timerlat_bpf__attach(bpf); +} + +/* + * timerlat_bpf_detach - detach BPF program to collect timerlat data + */ +void timerlat_bpf_detach(void) +{ + timerlat_bpf__detach(bpf); +} + +/* + * timerlat_bpf_detach - destroy BPF program to collect timerlat data + */ +void timerlat_bpf_destroy(void) +{ + timerlat_bpf__destroy(bpf); +} + +static int handle_rb_event(void *ctx, void *data, size_t data_sz) +{ + return 0; +} + +/* + * timerlat_bpf_wait - wait until tracing is stopped or signal + */ +int timerlat_bpf_wait(int timeout) +{ + struct ring_buffer *rb; + int retval; + + rb = ring_buffer__new(bpf_map__fd(bpf->maps.signal_stop_tracing), + handle_rb_event, NULL, NULL); + retval = ring_buffer__poll(rb, timeout * 1000); + ring_buffer__free(rb); + + return retval; +} + +/* + * timerlat_bpf_restart_tracing - restart stopped tracing + */ +int timerlat_bpf_restart_tracing(void) +{ + unsigned int key = 0; + unsigned long long value = 0; + + return bpf_map__update_elem(bpf->maps.stop_tracing, + &key, sizeof(key), + &value, sizeof(value), BPF_ANY); +} + +static int get_value(struct bpf_map *map_irq, + struct bpf_map *map_thread, + struct bpf_map *map_user, + int key, + long long *value_irq, + long long *value_thread, + long long *value_user, + int cpus) +{ + int err; + + err = bpf_map__lookup_elem(map_irq, &key, + sizeof(unsigned int), value_irq, + sizeof(long long) * cpus, 0); + if (err) + return err; + err = bpf_map__lookup_elem(map_thread, &key, + sizeof(unsigned int), value_thread, + sizeof(long long) * cpus, 0); + if (err) + return err; + err = bpf_map__lookup_elem(map_user, &key, + sizeof(unsigned int), value_user, + sizeof(long long) * cpus, 0); + if (err) + return err; + return 0; +} + +/* + * timerlat_bpf_get_hist_value - get value from BPF hist map + */ +int timerlat_bpf_get_hist_value(int key, + long long *value_irq, + long long *value_thread, + long long *value_user, + int cpus) +{ + return get_value(bpf->maps.hist_irq, + bpf->maps.hist_thread, + bpf->maps.hist_user, + key, value_irq, value_thread, value_user, cpus); +} + +/* + * timerlat_bpf_get_summary_value - get value from BPF summary map + */ +int timerlat_bpf_get_summary_value(enum summary_field key, + long long *value_irq, + long long *value_thread, + long long *value_user, + int cpus) +{ + return get_value(bpf->maps.summary_irq, + bpf->maps.summary_thread, + bpf->maps.summary_user, + key, value_irq, value_thread, value_user, cpus); +} +#endif /* HAVE_BPF_SKEL */ diff --git a/tools/tracing/rtla/src/timerlat_bpf.h b/tools/tracing/rtla/src/timerlat_bpf.h new file mode 100644 index 000000000000..118487436d30 --- /dev/null +++ b/tools/tracing/rtla/src/timerlat_bpf.h @@ -0,0 +1,62 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#pragma once + +enum summary_field { + SUMMARY_CURRENT, + SUMMARY_MIN, + SUMMARY_MAX, + SUMMARY_COUNT, + SUMMARY_SUM, + SUMMARY_OVERFLOW, + SUMMARY_FIELD_N +}; + +#ifndef __bpf__ +#ifdef HAVE_BPF_SKEL +int timerlat_bpf_init(struct timerlat_params *params); +int timerlat_bpf_attach(void); +void timerlat_bpf_detach(void); +void timerlat_bpf_destroy(void); +int timerlat_bpf_wait(int timeout); +int timerlat_bpf_restart_tracing(void); +int timerlat_bpf_get_hist_value(int key, + long long *value_irq, + long long *value_thread, + long long *value_user, + int cpus); +int timerlat_bpf_get_summary_value(enum summary_field key, + long long *value_irq, + long long *value_thread, + long long *value_user, + int cpus); + +static inline int have_libbpf_support(void) { return 1; } +#else +static inline int timerlat_bpf_init(struct timerlat_params *params) +{ + return -1; +} +static inline int timerlat_bpf_attach(void) { return -1; } +static inline void timerlat_bpf_detach(void) { }; +static inline void timerlat_bpf_destroy(void) { }; +static inline int timerlat_bpf_wait(int timeout) { return -1; } +static inline int timerlat_bpf_restart_tracing(void) { return -1; }; +static inline int timerlat_bpf_get_hist_value(int key, + long long *value_irq, + long long *value_thread, + long long *value_user, + int cpus) +{ + return -1; +} +static inline int timerlat_bpf_get_summary_value(enum summary_field key, + long long *value_irq, + long long *value_thread, + long long *value_user, + int cpus) +{ + return -1; +} +static inline int have_libbpf_support(void) { return 0; } +#endif /* HAVE_BPF_SKEL */ +#endif /* __bpf__ */ diff --git a/tools/tracing/rtla/src/timerlat_hist.c b/tools/tracing/rtla/src/timerlat_hist.c index 47d3d8b53cb2..1fb471a787b7 100644 --- a/tools/tracing/rtla/src/timerlat_hist.c +++ b/tools/tracing/rtla/src/timerlat_hist.c @@ -14,53 +14,18 @@ #include <sched.h> #include <pthread.h> -#include "utils.h" -#include "osnoise.h" #include "timerlat.h" #include "timerlat_aa.h" -#include "timerlat_u.h" - -struct timerlat_hist_params { - char *cpus; - cpu_set_t monitored_cpus; - char *trace_output; - char *cgroup_name; - unsigned long long runtime; - long long stop_us; - long long stop_total_us; - long long timerlat_period_us; - long long print_stack; - int sleep_time; - int output_divisor; - int duration; - int set_sched; - int dma_latency; - int cgroup; - int hk_cpus; - int no_aa; - int dump_tasks; - int user_hist; - cpu_set_t hk_cpu_set; - struct sched_attr sched_param; - struct trace_events *events; - char no_irq; - char no_thread; - char no_header; - char no_summary; - char no_index; - char with_zeros; - int bucket_size; - int entries; -}; +#include "timerlat_bpf.h" struct timerlat_hist_cpu { int *irq; int *thread; int *user; - int irq_count; - int thread_count; - int user_count; + unsigned long long irq_count; + unsigned long long thread_count; + unsigned long long user_count; unsigned long long min_irq; unsigned long long sum_irq; @@ -106,8 +71,12 @@ timerlat_free_histogram(struct timerlat_hist_data *data) /* one set of histograms per CPU */ if (data->hist) free(data->hist); +} - free(data); +static void timerlat_free_histogram_tool(struct osnoise_tool *tool) +{ + timerlat_free_histogram(tool->data); + timerlat_free(tool); } /* @@ -169,17 +138,16 @@ timerlat_hist_update(struct osnoise_tool *tool, int cpu, unsigned long long context, unsigned long long latency) { - struct timerlat_hist_params *params = tool->params; + struct timerlat_params *params = to_timerlat_params(tool->params); struct timerlat_hist_data *data = tool->data; int entries = data->entries; int bucket; int *hist; - if (params->output_divisor) - latency = latency / params->output_divisor; + if (params->common.output_divisor) + latency = latency / params->common.output_divisor; - if (data->bucket_size) - bucket = latency / data->bucket_size; + bucket = latency / data->bucket_size; if (!context) { hist = data->hist[cpu].irq; @@ -230,44 +198,125 @@ timerlat_hist_handler(struct trace_seq *s, struct tep_record *record, } /* + * timerlat_hist_bpf_pull_data - copy data from BPF maps into userspace + */ +static int timerlat_hist_bpf_pull_data(struct osnoise_tool *tool) +{ + struct timerlat_hist_data *data = tool->data; + int i, j, err; + long long value_irq[data->nr_cpus], + value_thread[data->nr_cpus], + value_user[data->nr_cpus]; + + /* Pull histogram */ + for (i = 0; i < data->entries; i++) { + err = timerlat_bpf_get_hist_value(i, value_irq, value_thread, + value_user, data->nr_cpus); + if (err) + return err; + for (j = 0; j < data->nr_cpus; j++) { + data->hist[j].irq[i] = value_irq[j]; + data->hist[j].thread[i] = value_thread[j]; + data->hist[j].user[i] = value_user[j]; + } + } + + /* Pull summary */ + err = timerlat_bpf_get_summary_value(SUMMARY_COUNT, + value_irq, value_thread, value_user, + data->nr_cpus); + if (err) + return err; + for (i = 0; i < data->nr_cpus; i++) { + data->hist[i].irq_count = value_irq[i]; + data->hist[i].thread_count = value_thread[i]; + data->hist[i].user_count = value_user[i]; + } + + err = timerlat_bpf_get_summary_value(SUMMARY_MIN, + value_irq, value_thread, value_user, + data->nr_cpus); + if (err) + return err; + for (i = 0; i < data->nr_cpus; i++) { + data->hist[i].min_irq = value_irq[i]; + data->hist[i].min_thread = value_thread[i]; + data->hist[i].min_user = value_user[i]; + } + + err = timerlat_bpf_get_summary_value(SUMMARY_MAX, + value_irq, value_thread, value_user, + data->nr_cpus); + if (err) + return err; + for (i = 0; i < data->nr_cpus; i++) { + data->hist[i].max_irq = value_irq[i]; + data->hist[i].max_thread = value_thread[i]; + data->hist[i].max_user = value_user[i]; + } + + err = timerlat_bpf_get_summary_value(SUMMARY_SUM, + value_irq, value_thread, value_user, + data->nr_cpus); + if (err) + return err; + for (i = 0; i < data->nr_cpus; i++) { + data->hist[i].sum_irq = value_irq[i]; + data->hist[i].sum_thread = value_thread[i]; + data->hist[i].sum_user = value_user[i]; + } + + err = timerlat_bpf_get_summary_value(SUMMARY_OVERFLOW, + value_irq, value_thread, value_user, + data->nr_cpus); + if (err) + return err; + for (i = 0; i < data->nr_cpus; i++) { + data->hist[i].irq[data->entries] = value_irq[i]; + data->hist[i].thread[data->entries] = value_thread[i]; + data->hist[i].user[data->entries] = value_user[i]; + } + + return 0; +} + +/* * timerlat_hist_header - print the header of the tracer to the output */ static void timerlat_hist_header(struct osnoise_tool *tool) { - struct timerlat_hist_params *params = tool->params; + struct timerlat_params *params = to_timerlat_params(tool->params); struct timerlat_hist_data *data = tool->data; struct trace_seq *s = tool->trace.seq; char duration[26]; int cpu; - if (params->no_header) + if (params->common.hist.no_header) return; get_duration(tool->start_time, duration, sizeof(duration)); trace_seq_printf(s, "# RTLA timerlat histogram\n"); trace_seq_printf(s, "# Time unit is %s (%s)\n", - params->output_divisor == 1 ? "nanoseconds" : "microseconds", - params->output_divisor == 1 ? "ns" : "us"); + params->common.output_divisor == 1 ? "nanoseconds" : "microseconds", + params->common.output_divisor == 1 ? "ns" : "us"); trace_seq_printf(s, "# Duration: %s\n", duration); - if (!params->no_index) + if (!params->common.hist.no_index) trace_seq_printf(s, "Index"); - for (cpu = 0; cpu < data->nr_cpus; cpu++) { - if (params->cpus && !CPU_ISSET(cpu, ¶ms->monitored_cpus)) - continue; + for_each_monitored_cpu(cpu, data->nr_cpus, ¶ms->common) { if (!data->hist[cpu].irq_count && !data->hist[cpu].thread_count) continue; - if (!params->no_irq) + if (!params->common.hist.no_irq) trace_seq_printf(s, " IRQ-%03d", cpu); - if (!params->no_thread) + if (!params->common.hist.no_thread) trace_seq_printf(s, " Thr-%03d", cpu); - if (params->user_hist) + if (params->common.user_data) trace_seq_printf(s, " Usr-%03d", cpu); } trace_seq_printf(s, "\n"); @@ -278,135 +327,292 @@ static void timerlat_hist_header(struct osnoise_tool *tool) } /* + * format_summary_value - format a line of summary value (min, max or avg) + * of hist data + */ +static void format_summary_value(struct trace_seq *seq, + int count, + unsigned long long val, + bool avg) +{ + if (count) + trace_seq_printf(seq, "%9llu ", avg ? val / count : val); + else + trace_seq_printf(seq, "%9c ", '-'); +} + +/* * timerlat_print_summary - print the summary of the hist data to the output */ static void -timerlat_print_summary(struct timerlat_hist_params *params, +timerlat_print_summary(struct timerlat_params *params, struct trace_instance *trace, struct timerlat_hist_data *data) { int cpu; - if (params->no_summary) + if (params->common.hist.no_summary) return; - if (!params->no_index) + if (!params->common.hist.no_index) trace_seq_printf(trace->seq, "count:"); - for (cpu = 0; cpu < data->nr_cpus; cpu++) { - if (params->cpus && !CPU_ISSET(cpu, ¶ms->monitored_cpus)) - continue; + for_each_monitored_cpu(cpu, data->nr_cpus, ¶ms->common) { if (!data->hist[cpu].irq_count && !data->hist[cpu].thread_count) continue; - if (!params->no_irq) - trace_seq_printf(trace->seq, "%9d ", + if (!params->common.hist.no_irq) + trace_seq_printf(trace->seq, "%9llu ", data->hist[cpu].irq_count); - if (!params->no_thread) - trace_seq_printf(trace->seq, "%9d ", + if (!params->common.hist.no_thread) + trace_seq_printf(trace->seq, "%9llu ", data->hist[cpu].thread_count); - if (params->user_hist) - trace_seq_printf(trace->seq, "%9d ", + if (params->common.user_data) + trace_seq_printf(trace->seq, "%9llu ", data->hist[cpu].user_count); } trace_seq_printf(trace->seq, "\n"); - if (!params->no_index) + if (!params->common.hist.no_index) trace_seq_printf(trace->seq, "min: "); - for (cpu = 0; cpu < data->nr_cpus; cpu++) { - if (params->cpus && !CPU_ISSET(cpu, ¶ms->monitored_cpus)) - continue; + for_each_monitored_cpu(cpu, data->nr_cpus, ¶ms->common) { if (!data->hist[cpu].irq_count && !data->hist[cpu].thread_count) continue; - if (!params->no_irq) - trace_seq_printf(trace->seq, "%9llu ", - data->hist[cpu].min_irq); - - if (!params->no_thread) - trace_seq_printf(trace->seq, "%9llu ", - data->hist[cpu].min_thread); - - if (params->user_hist) - trace_seq_printf(trace->seq, "%9llu ", - data->hist[cpu].min_user); + if (!params->common.hist.no_irq) + format_summary_value(trace->seq, + data->hist[cpu].irq_count, + data->hist[cpu].min_irq, + false); + + if (!params->common.hist.no_thread) + format_summary_value(trace->seq, + data->hist[cpu].thread_count, + data->hist[cpu].min_thread, + false); + + if (params->common.user_data) + format_summary_value(trace->seq, + data->hist[cpu].user_count, + data->hist[cpu].min_user, + false); } trace_seq_printf(trace->seq, "\n"); - if (!params->no_index) + if (!params->common.hist.no_index) trace_seq_printf(trace->seq, "avg: "); - for (cpu = 0; cpu < data->nr_cpus; cpu++) { - if (params->cpus && !CPU_ISSET(cpu, ¶ms->monitored_cpus)) - continue; + for_each_monitored_cpu(cpu, data->nr_cpus, ¶ms->common) { if (!data->hist[cpu].irq_count && !data->hist[cpu].thread_count) continue; - if (!params->no_irq) { - if (data->hist[cpu].irq_count) - trace_seq_printf(trace->seq, "%9llu ", - data->hist[cpu].sum_irq / data->hist[cpu].irq_count); - else - trace_seq_printf(trace->seq, " - "); - } - - if (!params->no_thread) { - if (data->hist[cpu].thread_count) - trace_seq_printf(trace->seq, "%9llu ", - data->hist[cpu].sum_thread / data->hist[cpu].thread_count); - else - trace_seq_printf(trace->seq, " - "); - } - - if (params->user_hist) { - if (data->hist[cpu].user_count) - trace_seq_printf(trace->seq, "%9llu ", - data->hist[cpu].sum_user / data->hist[cpu].user_count); - else - trace_seq_printf(trace->seq, " - "); - } + if (!params->common.hist.no_irq) + format_summary_value(trace->seq, + data->hist[cpu].irq_count, + data->hist[cpu].sum_irq, + true); + + if (!params->common.hist.no_thread) + format_summary_value(trace->seq, + data->hist[cpu].thread_count, + data->hist[cpu].sum_thread, + true); + + if (params->common.user_data) + format_summary_value(trace->seq, + data->hist[cpu].user_count, + data->hist[cpu].sum_user, + true); } trace_seq_printf(trace->seq, "\n"); - if (!params->no_index) + if (!params->common.hist.no_index) trace_seq_printf(trace->seq, "max: "); - for (cpu = 0; cpu < data->nr_cpus; cpu++) { - if (params->cpus && !CPU_ISSET(cpu, ¶ms->monitored_cpus)) + for_each_monitored_cpu(cpu, data->nr_cpus, ¶ms->common) { + + if (!data->hist[cpu].irq_count && !data->hist[cpu].thread_count) continue; + if (!params->common.hist.no_irq) + format_summary_value(trace->seq, + data->hist[cpu].irq_count, + data->hist[cpu].max_irq, + false); + + if (!params->common.hist.no_thread) + format_summary_value(trace->seq, + data->hist[cpu].thread_count, + data->hist[cpu].max_thread, + false); + + if (params->common.user_data) + format_summary_value(trace->seq, + data->hist[cpu].user_count, + data->hist[cpu].max_user, + false); + } + trace_seq_printf(trace->seq, "\n"); + trace_seq_do_printf(trace->seq); + trace_seq_reset(trace->seq); +} + +static void +timerlat_print_stats_all(struct timerlat_params *params, + struct trace_instance *trace, + struct timerlat_hist_data *data) +{ + struct timerlat_hist_cpu *cpu_data; + struct timerlat_hist_cpu sum; + int cpu; + + if (params->common.hist.no_summary) + return; + + memset(&sum, 0, sizeof(sum)); + sum.min_irq = ~0; + sum.min_thread = ~0; + sum.min_user = ~0; + + for_each_monitored_cpu(cpu, data->nr_cpus, ¶ms->common) { + if (!data->hist[cpu].irq_count && !data->hist[cpu].thread_count) continue; - if (!params->no_irq) - trace_seq_printf(trace->seq, "%9llu ", - data->hist[cpu].max_irq); + cpu_data = &data->hist[cpu]; - if (!params->no_thread) - trace_seq_printf(trace->seq, "%9llu ", - data->hist[cpu].max_thread); + sum.irq_count += cpu_data->irq_count; + update_min(&sum.min_irq, &cpu_data->min_irq); + update_sum(&sum.sum_irq, &cpu_data->sum_irq); + update_max(&sum.max_irq, &cpu_data->max_irq); - if (params->user_hist) - trace_seq_printf(trace->seq, "%9llu ", - data->hist[cpu].max_user); + sum.thread_count += cpu_data->thread_count; + update_min(&sum.min_thread, &cpu_data->min_thread); + update_sum(&sum.sum_thread, &cpu_data->sum_thread); + update_max(&sum.max_thread, &cpu_data->max_thread); + + sum.user_count += cpu_data->user_count; + update_min(&sum.min_user, &cpu_data->min_user); + update_sum(&sum.sum_user, &cpu_data->sum_user); + update_max(&sum.max_user, &cpu_data->max_user); } + + if (!params->common.hist.no_index) + trace_seq_printf(trace->seq, "ALL: "); + + if (!params->common.hist.no_irq) + trace_seq_printf(trace->seq, " IRQ"); + + if (!params->common.hist.no_thread) + trace_seq_printf(trace->seq, " Thr"); + + if (params->common.user_data) + trace_seq_printf(trace->seq, " Usr"); + + trace_seq_printf(trace->seq, "\n"); + + if (!params->common.hist.no_index) + trace_seq_printf(trace->seq, "count:"); + + if (!params->common.hist.no_irq) + trace_seq_printf(trace->seq, "%9llu ", + sum.irq_count); + + if (!params->common.hist.no_thread) + trace_seq_printf(trace->seq, "%9llu ", + sum.thread_count); + + if (params->common.user_data) + trace_seq_printf(trace->seq, "%9llu ", + sum.user_count); + + trace_seq_printf(trace->seq, "\n"); + + if (!params->common.hist.no_index) + trace_seq_printf(trace->seq, "min: "); + + if (!params->common.hist.no_irq) + format_summary_value(trace->seq, + sum.irq_count, + sum.min_irq, + false); + + if (!params->common.hist.no_thread) + format_summary_value(trace->seq, + sum.thread_count, + sum.min_thread, + false); + + if (params->common.user_data) + format_summary_value(trace->seq, + sum.user_count, + sum.min_user, + false); + + trace_seq_printf(trace->seq, "\n"); + + if (!params->common.hist.no_index) + trace_seq_printf(trace->seq, "avg: "); + + if (!params->common.hist.no_irq) + format_summary_value(trace->seq, + sum.irq_count, + sum.sum_irq, + true); + + if (!params->common.hist.no_thread) + format_summary_value(trace->seq, + sum.thread_count, + sum.sum_thread, + true); + + if (params->common.user_data) + format_summary_value(trace->seq, + sum.user_count, + sum.sum_user, + true); + + trace_seq_printf(trace->seq, "\n"); + + if (!params->common.hist.no_index) + trace_seq_printf(trace->seq, "max: "); + + if (!params->common.hist.no_irq) + format_summary_value(trace->seq, + sum.irq_count, + sum.max_irq, + false); + + if (!params->common.hist.no_thread) + format_summary_value(trace->seq, + sum.thread_count, + sum.max_thread, + false); + + if (params->common.user_data) + format_summary_value(trace->seq, + sum.user_count, + sum.max_user, + false); + trace_seq_printf(trace->seq, "\n"); trace_seq_do_printf(trace->seq); trace_seq_reset(trace->seq); } /* - * timerlat_print_stats - print data for all CPUs + * timerlat_print_stats - print data for each CPUs */ static void -timerlat_print_stats(struct timerlat_hist_params *params, struct osnoise_tool *tool) +timerlat_print_stats(struct osnoise_tool *tool) { + struct timerlat_params *params = to_timerlat_params(tool->params); struct timerlat_hist_data *data = tool->data; struct trace_instance *trace = &tool->trace; int bucket, cpu; @@ -417,30 +623,28 @@ timerlat_print_stats(struct timerlat_hist_params *params, struct osnoise_tool *t for (bucket = 0; bucket < data->entries; bucket++) { total = 0; - if (!params->no_index) + if (!params->common.hist.no_index) trace_seq_printf(trace->seq, "%-6d", bucket * data->bucket_size); - for (cpu = 0; cpu < data->nr_cpus; cpu++) { - if (params->cpus && !CPU_ISSET(cpu, ¶ms->monitored_cpus)) - continue; + for_each_monitored_cpu(cpu, data->nr_cpus, ¶ms->common) { if (!data->hist[cpu].irq_count && !data->hist[cpu].thread_count) continue; - if (!params->no_irq) { + if (!params->common.hist.no_irq) { total += data->hist[cpu].irq[bucket]; trace_seq_printf(trace->seq, "%9d ", data->hist[cpu].irq[bucket]); } - if (!params->no_thread) { + if (!params->common.hist.no_thread) { total += data->hist[cpu].thread[bucket]; trace_seq_printf(trace->seq, "%9d ", data->hist[cpu].thread[bucket]); } - if (params->user_hist) { + if (params->common.user_data) { total += data->hist[cpu].user[bucket]; trace_seq_printf(trace->seq, "%9d ", data->hist[cpu].user[bucket]); @@ -448,7 +652,7 @@ timerlat_print_stats(struct timerlat_hist_params *params, struct osnoise_tool *t } - if (total == 0 && !params->with_zeros) { + if (total == 0 && !params->common.hist.with_zeros) { trace_seq_reset(trace->seq); continue; } @@ -458,25 +662,23 @@ timerlat_print_stats(struct timerlat_hist_params *params, struct osnoise_tool *t trace_seq_reset(trace->seq); } - if (!params->no_index) + if (!params->common.hist.no_index) trace_seq_printf(trace->seq, "over: "); - for (cpu = 0; cpu < data->nr_cpus; cpu++) { - if (params->cpus && !CPU_ISSET(cpu, ¶ms->monitored_cpus)) - continue; + for_each_monitored_cpu(cpu, data->nr_cpus, ¶ms->common) { if (!data->hist[cpu].irq_count && !data->hist[cpu].thread_count) continue; - if (!params->no_irq) + if (!params->common.hist.no_irq) trace_seq_printf(trace->seq, "%9d ", data->hist[cpu].irq[data->entries]); - if (!params->no_thread) + if (!params->common.hist.no_thread) trace_seq_printf(trace->seq, "%9d ", data->hist[cpu].thread[data->entries]); - if (params->user_hist) + if (params->common.user_data) trace_seq_printf(trace->seq, "%9d ", data->hist[cpu].user[data->entries]); } @@ -485,21 +687,24 @@ timerlat_print_stats(struct timerlat_hist_params *params, struct osnoise_tool *t trace_seq_reset(trace->seq); timerlat_print_summary(params, trace, data); + timerlat_print_stats_all(params, trace, data); + osnoise_report_missed_events(tool); } /* * timerlat_hist_usage - prints timerlat top usage message */ -static void timerlat_hist_usage(char *usage) +static void timerlat_hist_usage(void) { int i; char *msg[] = { "", " usage: [rtla] timerlat hist [-h] [-q] [-d s] [-D] [-n] [-a us] [-p us] [-i us] [-T us] [-s us] \\", - " [-t[=file]] [-e sys[:event]] [--filter <filter>] [--trigger <trigger>] [-c cpu-list] [-H cpu-list]\\", + " [-t [file]] [-e sys[:event]] [--filter <filter>] [--trigger <trigger>] [-c cpu-list] [-H cpu-list]\\", " [-P priority] [-E N] [-b N] [--no-irq] [--no-thread] [--no-header] [--no-summary] \\", - " [--no-index] [--with-zeros] [--dma-latency us] [-C[=cgroup_name]] [--no-aa] [--dump-task] [-u]", + " [--no-index] [--with-zeros] [--dma-latency us] [-C [cgroup_name]] [--no-aa] [--dump-task] [-u|-k]", + " [--warm-up s] [--deepest-idle-state n]", "", " -h/--help: print this menu", " -a/--auto: set automatic trace mode, stopping the session if argument in us latency is hit", @@ -509,11 +714,11 @@ static void timerlat_hist_usage(char *usage) " -s/--stack us: save the stack trace at the IRQ if a thread latency is higher than the argument in us", " -c/--cpus cpus: run the tracer only on the given cpus", " -H/--house-keeping cpus: run rtla control threads only on the given cpus", - " -C/--cgroup[=cgroup_name]: set cgroup, if no cgroup_name is passed, the rtla's cgroup will be inherited", + " -C/--cgroup [cgroup_name]: set cgroup, if no cgroup_name is passed, the rtla's cgroup will be inherited", " -d/--duration time[m|h|d]: duration of the session in seconds", " --dump-tasks: prints the task running on all CPUs if stop conditions are met (depends on !--no-aa)", " -D/--debug: print debug info", - " -t/--trace[=file]: save the stopped trace to [file|timerlat_trace.txt]", + " -t/--trace [file]: save the stopped trace to [file|timerlat_trace.txt]", " -e/--event <sys:event>: enable the <sys:event> in the trace instance, multiple -e are allowed", " --filter <filter>: enable a trace event filter to the previous -e event", " --trigger <trigger>: enable a trace event trigger to the previous -e event", @@ -534,44 +739,59 @@ static void timerlat_hist_usage(char *usage) " f:prio - use SCHED_FIFO with prio", " d:runtime[us|ms|s]:period[us|ms|s] - use SCHED_DEADLINE with runtime and period", " in nanoseconds", - " -u/--user-threads: use rtla user-space threads instead of in-kernel timerlat threads", + " -u/--user-threads: use rtla user-space threads instead of kernel-space timerlat threads", + " -k/--kernel-threads: use timerlat kernel-space threads instead of rtla user-space threads", + " -U/--user-load: enable timerlat for user-defined user-space workload", + " --warm-up s: let the workload run for s seconds before collecting data", + " --trace-buffer-size kB: set the per-cpu trace buffer size in kB", + " --deepest-idle-state n: only go down to idle state n on cpus used by timerlat to reduce exit from idle latency", + " --on-threshold <action>: define action to be executed at latency threshold, multiple are allowed", + " --on-end <action>: define action to be executed at measurement end, multiple are allowed", NULL, }; - if (usage) - fprintf(stderr, "%s\n", usage); - fprintf(stderr, "rtla timerlat hist: a per-cpu histogram of the timer latency (version %s)\n", VERSION); for (i = 0; msg[i]; i++) fprintf(stderr, "%s\n", msg[i]); - exit(1); + + exit(EXIT_SUCCESS); } /* * timerlat_hist_parse_args - allocs, parse and fill the cmd line parameters */ -static struct timerlat_hist_params +static struct common_params *timerlat_hist_parse_args(int argc, char *argv[]) { - struct timerlat_hist_params *params; + struct timerlat_params *params; struct trace_events *tevent; int auto_thresh; int retval; int c; + char *trace_output = NULL; params = calloc(1, sizeof(*params)); if (!params) exit(1); + actions_init(¶ms->common.threshold_actions); + actions_init(¶ms->common.end_actions); + /* disabled by default */ params->dma_latency = -1; + /* disabled by default */ + params->deepest_idle_state = -2; + /* display data in microseconds */ - params->output_divisor = 1000; - params->bucket_size = 1; - params->entries = 256; + params->common.output_divisor = 1000; + params->common.hist.bucket_size = 1; + params->common.hist.entries = 256; + + /* default to BPF mode */ + params->mode = TRACING_MODE_BPF; while (1) { static struct option long_options[] = { @@ -592,6 +812,8 @@ static struct timerlat_hist_params {"thread", required_argument, 0, 'T'}, {"trace", optional_argument, 0, 't'}, {"user-threads", no_argument, 0, 'u'}, + {"kernel-threads", no_argument, 0, 'k'}, + {"user-load", no_argument, 0, 'U'}, {"event", required_argument, 0, 'e'}, {"no-irq", no_argument, 0, '0'}, {"no-thread", no_argument, 0, '1'}, @@ -604,14 +826,16 @@ static struct timerlat_hist_params {"dma-latency", required_argument, 0, '8'}, {"no-aa", no_argument, 0, '9'}, {"dump-task", no_argument, 0, '\1'}, + {"warm-up", required_argument, 0, '\2'}, + {"trace-buffer-size", required_argument, 0, '\3'}, + {"deepest-idle-state", required_argument, 0, '\4'}, + {"on-threshold", required_argument, 0, '\5'}, + {"on-end", required_argument, 0, '\6'}, {0, 0, 0, 0} }; - /* getopt_long stores the option index here. */ - int option_index = 0; - - c = getopt_long(argc, argv, "a:c:C::b:d:e:E:DhH:i:np:P:s:t::T:u0123456:7:8:9\1", - long_options, &option_index); + c = getopt_long(argc, argv, "a:c:C::b:d:e:E:DhH:i:knp:P:s:t::T:uU0123456:7:8:9\1\2:\3:", + long_options, NULL); /* detect the end of the options. */ if (c == -1) @@ -622,153 +846,144 @@ static struct timerlat_hist_params auto_thresh = get_llong_from_str(optarg); /* set thread stop to auto_thresh */ - params->stop_total_us = auto_thresh; - params->stop_us = auto_thresh; + params->common.stop_total_us = auto_thresh; + params->common.stop_us = auto_thresh; /* get stack trace */ params->print_stack = auto_thresh; /* set trace */ - params->trace_output = "timerlat_trace.txt"; + if (!trace_output) + trace_output = "timerlat_trace.txt"; break; case 'c': - retval = parse_cpu_set(optarg, ¶ms->monitored_cpus); + retval = parse_cpu_set(optarg, ¶ms->common.monitored_cpus); if (retval) - timerlat_hist_usage("\nInvalid -c cpu list\n"); - params->cpus = optarg; + fatal("Invalid -c cpu list"); + params->common.cpus = optarg; break; case 'C': - params->cgroup = 1; - if (!optarg) { - /* will inherit this cgroup */ - params->cgroup_name = NULL; - } else if (*optarg == '=') { - /* skip the = */ - params->cgroup_name = ++optarg; - } + params->common.cgroup = 1; + params->common.cgroup_name = parse_optional_arg(argc, argv); break; case 'b': - params->bucket_size = get_llong_from_str(optarg); - if ((params->bucket_size == 0) || (params->bucket_size >= 1000000)) - timerlat_hist_usage("Bucket size needs to be > 0 and <= 1000000\n"); + params->common.hist.bucket_size = get_llong_from_str(optarg); + if (params->common.hist.bucket_size == 0 || + params->common.hist.bucket_size >= 1000000) + fatal("Bucket size needs to be > 0 and <= 1000000"); break; case 'D': config_debug = 1; break; case 'd': - params->duration = parse_seconds_duration(optarg); - if (!params->duration) - timerlat_hist_usage("Invalid -D duration\n"); + params->common.duration = parse_seconds_duration(optarg); + if (!params->common.duration) + fatal("Invalid -D duration"); break; case 'e': tevent = trace_event_alloc(optarg); - if (!tevent) { - err_msg("Error alloc trace event"); - exit(EXIT_FAILURE); - } + if (!tevent) + fatal("Error alloc trace event"); - if (params->events) - tevent->next = params->events; + if (params->common.events) + tevent->next = params->common.events; - params->events = tevent; + params->common.events = tevent; break; case 'E': - params->entries = get_llong_from_str(optarg); - if ((params->entries < 10) || (params->entries > 9999999)) - timerlat_hist_usage("Entries must be > 10 and < 9999999\n"); + params->common.hist.entries = get_llong_from_str(optarg); + if (params->common.hist.entries < 10 || + params->common.hist.entries > 9999999) + fatal("Entries must be > 10 and < 9999999"); break; case 'h': case '?': - timerlat_hist_usage(NULL); + timerlat_hist_usage(); break; case 'H': - params->hk_cpus = 1; - retval = parse_cpu_set(optarg, ¶ms->hk_cpu_set); - if (retval) { - err_msg("Error parsing house keeping CPUs\n"); - exit(EXIT_FAILURE); - } + params->common.hk_cpus = 1; + retval = parse_cpu_set(optarg, ¶ms->common.hk_cpu_set); + if (retval) + fatal("Error parsing house keeping CPUs"); break; case 'i': - params->stop_us = get_llong_from_str(optarg); + params->common.stop_us = get_llong_from_str(optarg); + break; + case 'k': + params->common.kernel_workload = 1; break; case 'n': - params->output_divisor = 1; + params->common.output_divisor = 1; break; case 'p': params->timerlat_period_us = get_llong_from_str(optarg); if (params->timerlat_period_us > 1000000) - timerlat_hist_usage("Period longer than 1 s\n"); + fatal("Period longer than 1 s"); break; case 'P': - retval = parse_prio(optarg, ¶ms->sched_param); + retval = parse_prio(optarg, ¶ms->common.sched_param); if (retval == -1) - timerlat_hist_usage("Invalid -P priority"); - params->set_sched = 1; + fatal("Invalid -P priority"); + params->common.set_sched = 1; break; case 's': params->print_stack = get_llong_from_str(optarg); break; case 'T': - params->stop_total_us = get_llong_from_str(optarg); + params->common.stop_total_us = get_llong_from_str(optarg); break; case 't': - if (optarg) - /* skip = */ - params->trace_output = &optarg[1]; - else - params->trace_output = "timerlat_trace.txt"; + trace_output = parse_optional_arg(argc, argv); + if (!trace_output) + trace_output = "timerlat_trace.txt"; break; case 'u': - params->user_hist = 1; + params->common.user_workload = 1; + /* fallback: -u implies in -U */ + case 'U': + params->common.user_data = 1; break; case '0': /* no irq */ - params->no_irq = 1; + params->common.hist.no_irq = 1; break; case '1': /* no thread */ - params->no_thread = 1; + params->common.hist.no_thread = 1; break; case '2': /* no header */ - params->no_header = 1; + params->common.hist.no_header = 1; break; case '3': /* no summary */ - params->no_summary = 1; + params->common.hist.no_summary = 1; break; case '4': /* no index */ - params->no_index = 1; + params->common.hist.no_index = 1; break; case '5': /* with zeros */ - params->with_zeros = 1; + params->common.hist.with_zeros = 1; break; case '6': /* trigger */ - if (params->events) { - retval = trace_event_add_trigger(params->events, optarg); - if (retval) { - err_msg("Error adding trigger %s\n", optarg); - exit(EXIT_FAILURE); - } + if (params->common.events) { + retval = trace_event_add_trigger(params->common.events, optarg); + if (retval) + fatal("Error adding trigger %s", optarg); } else { - timerlat_hist_usage("--trigger requires a previous -e\n"); + fatal("--trigger requires a previous -e"); } break; case '7': /* filter */ - if (params->events) { - retval = trace_event_add_filter(params->events, optarg); - if (retval) { - err_msg("Error adding filter %s\n", optarg); - exit(EXIT_FAILURE); - } + if (params->common.events) { + retval = trace_event_add_filter(params->common.events, optarg); + if (retval) + fatal("Error adding filter %s", optarg); } else { - timerlat_hist_usage("--filter requires a previous -e\n"); + fatal("--filter requires a previous -e"); } break; case '8': params->dma_latency = get_llong_from_str(optarg); - if (params->dma_latency < 0 || params->dma_latency > 10000) { - err_msg("--dma-latency needs to be >= 0 and < 10000"); - exit(EXIT_FAILURE); - } + if (params->dma_latency < 0 || params->dma_latency > 10000) + fatal("--dma-latency needs to be >= 0 and < 10000"); break; case '9': params->no_aa = 1; @@ -776,110 +991,78 @@ static struct timerlat_hist_params case '\1': params->dump_tasks = 1; break; + case '\2': + params->common.warmup = get_llong_from_str(optarg); + break; + case '\3': + params->common.buffer_size = get_llong_from_str(optarg); + break; + case '\4': + params->deepest_idle_state = get_llong_from_str(optarg); + break; + case '\5': + retval = actions_parse(¶ms->common.threshold_actions, optarg, + "timerlat_trace.txt"); + if (retval) + fatal("Invalid action %s", optarg); + break; + case '\6': + retval = actions_parse(¶ms->common.end_actions, optarg, + "timerlat_trace.txt"); + if (retval) + fatal("Invalid action %s", optarg); + break; default: - timerlat_hist_usage("Invalid option"); + fatal("Invalid option"); } } - if (geteuid()) { - err_msg("rtla needs root permission\n"); - exit(EXIT_FAILURE); - } + if (trace_output) + actions_add_trace_output(¶ms->common.threshold_actions, trace_output); - if (params->no_irq && params->no_thread) - timerlat_hist_usage("no-irq and no-thread set, there is nothing to do here"); + if (geteuid()) + fatal("rtla needs root permission"); - if (params->no_index && !params->with_zeros) - timerlat_hist_usage("no-index set with with-zeros is not set - it does not make sense"); + if (params->common.hist.no_irq && params->common.hist.no_thread) + fatal("no-irq and no-thread set, there is nothing to do here"); + + if (params->common.hist.no_index && !params->common.hist.with_zeros) + fatal("no-index set with with-zeros is not set - it does not make sense"); /* * Auto analysis only happens if stop tracing, thus: */ - if (!params->stop_us && !params->stop_total_us) + if (!params->common.stop_us && !params->common.stop_total_us) params->no_aa = 1; - return params; + if (params->common.kernel_workload && params->common.user_workload) + fatal("--kernel-threads and --user-threads are mutually exclusive!"); + + /* + * If auto-analysis or trace output is enabled, switch from BPF mode to + * mixed mode + */ + if (params->mode == TRACING_MODE_BPF && + (params->common.threshold_actions.present[ACTION_TRACE_OUTPUT] || + params->common.end_actions.present[ACTION_TRACE_OUTPUT] || + !params->no_aa)) + params->mode = TRACING_MODE_MIXED; + + return ¶ms->common; } /* * timerlat_hist_apply_config - apply the hist configs to the initialized tool */ static int -timerlat_hist_apply_config(struct osnoise_tool *tool, struct timerlat_hist_params *params) +timerlat_hist_apply_config(struct osnoise_tool *tool) { - int retval, i; - - if (!params->sleep_time) - params->sleep_time = 1; - - if (params->cpus) { - retval = osnoise_set_cpus(tool->context, params->cpus); - if (retval) { - err_msg("Failed to apply CPUs config\n"); - goto out_err; - } - } else { - for (i = 0; i < sysconf(_SC_NPROCESSORS_CONF); i++) - CPU_SET(i, ¶ms->monitored_cpus); - } - - if (params->stop_us) { - retval = osnoise_set_stop_us(tool->context, params->stop_us); - if (retval) { - err_msg("Failed to set stop us\n"); - goto out_err; - } - } - - if (params->stop_total_us) { - retval = osnoise_set_stop_total_us(tool->context, params->stop_total_us); - if (retval) { - err_msg("Failed to set stop total us\n"); - goto out_err; - } - } - - if (params->timerlat_period_us) { - retval = osnoise_set_timerlat_period_us(tool->context, params->timerlat_period_us); - if (retval) { - err_msg("Failed to set timerlat period\n"); - goto out_err; - } - } - - if (params->print_stack) { - retval = osnoise_set_print_stack(tool->context, params->print_stack); - if (retval) { - err_msg("Failed to set print stack\n"); - goto out_err; - } - } - - if (params->hk_cpus) { - retval = sched_setaffinity(getpid(), sizeof(params->hk_cpu_set), - ¶ms->hk_cpu_set); - if (retval == -1) { - err_msg("Failed to set rtla to the house keeping CPUs\n"); - goto out_err; - } - } else if (params->cpus) { - /* - * Even if the user do not set a house-keeping CPU, try to - * move rtla to a CPU set different to the one where the user - * set the workload to run. - * - * No need to check results as this is an automatic attempt. - */ - auto_house_keeping(¶ms->monitored_cpus); - } + struct timerlat_params *params = to_timerlat_params(tool->params); + int retval; - if (params->user_hist) { - retval = osnoise_set_workload(tool->context, 0); - if (retval) { - err_msg("Failed to set OSNOISE_WORKLOAD option\n"); - goto out_err; - } - } + retval = timerlat_apply_config(tool, params); + if (retval) + goto out_err; return 0; @@ -891,7 +1074,7 @@ out_err: * timerlat_init_hist - initialize a timerlat hist tool with parameters */ static struct osnoise_tool -*timerlat_init_hist(struct timerlat_hist_params *params) +*timerlat_init_hist(struct common_params *params) { struct osnoise_tool *tool; int nr_cpus; @@ -902,12 +1085,11 @@ static struct osnoise_tool if (!tool) return NULL; - tool->data = timerlat_alloc_histogram(nr_cpus, params->entries, params->bucket_size); + tool->data = timerlat_alloc_histogram(nr_cpus, params->hist.entries, + params->hist.bucket_size); if (!tool->data) goto out_err; - tool->params = params; - tep_register_event_handler(tool->trace.tep, -1, "ftrace", "timerlat", timerlat_hist_handler, tool); @@ -918,211 +1100,61 @@ out_err: return NULL; } -static int stop_tracing; -static void stop_hist(int sig) -{ - stop_tracing = 1; -} - -/* - * timerlat_hist_set_signals - handles the signal to stop the tool - */ -static void -timerlat_hist_set_signals(struct timerlat_hist_params *params) +static int timerlat_hist_bpf_main_loop(struct osnoise_tool *tool) { - signal(SIGINT, stop_hist); - if (params->duration) { - signal(SIGALRM, stop_hist); - alarm(params->duration); - } -} - -int timerlat_hist_main(int argc, char *argv[]) -{ - struct timerlat_hist_params *params; - struct osnoise_tool *record = NULL; - struct timerlat_u_params params_u; - struct osnoise_tool *tool = NULL; - struct osnoise_tool *aa = NULL; - struct trace_instance *trace; - int dma_latency_fd = -1; - int return_value = 1; - pthread_t timerlat_u; + struct timerlat_params *params = to_timerlat_params(tool->params); int retval; - params = timerlat_hist_parse_args(argc, argv); - if (!params) - exit(1); - - tool = timerlat_init_hist(params); - if (!tool) { - err_msg("Could not init osnoise hist\n"); - goto out_exit; - } - - retval = timerlat_hist_apply_config(tool, params); - if (retval) { - err_msg("Could not apply config\n"); - goto out_free; - } - - trace = &tool->trace; - - retval = enable_timerlat(trace); - if (retval) { - err_msg("Failed to enable timerlat tracer\n"); - goto out_free; - } - - if (params->set_sched) { - retval = set_comm_sched_attr("timerlat/", ¶ms->sched_param); - if (retval) { - err_msg("Failed to set sched parameters\n"); - goto out_free; - } - } - - if (params->cgroup && !params->user_hist) { - retval = set_comm_cgroup("timerlat/", params->cgroup_name); - if (!retval) { - err_msg("Failed to move threads to cgroup\n"); - goto out_free; - } - } - - if (params->dma_latency >= 0) { - dma_latency_fd = set_cpu_dma_latency(params->dma_latency); - if (dma_latency_fd < 0) { - err_msg("Could not set /dev/cpu_dma_latency.\n"); - goto out_free; - } - } - - if (params->trace_output) { - record = osnoise_init_trace_tool("timerlat"); - if (!record) { - err_msg("Failed to enable the trace instance\n"); - goto out_free; - } - - if (params->events) { - retval = trace_events_enable(&record->trace, params->events); - if (retval) - goto out_hist; - } - } - - if (!params->no_aa) { - aa = osnoise_init_tool("timerlat_aa"); - if (!aa) - goto out_hist; - - retval = timerlat_aa_init(aa, params->dump_tasks); - if (retval) { - err_msg("Failed to enable the auto analysis instance\n"); - goto out_hist; - } - - retval = enable_timerlat(&aa->trace); - if (retval) { - err_msg("Failed to enable timerlat tracer\n"); - goto out_hist; - } - } - - /* - * Start the tracers here, after having set all instances. - * - * Let the trace instance start first for the case of hitting a stop - * tracing while enabling other instances. The trace instance is the - * one with most valuable information. - */ - if (params->trace_output) - trace_instance_start(&record->trace); - if (!params->no_aa) - trace_instance_start(&aa->trace); - trace_instance_start(trace); - - tool->start_time = time(NULL); - timerlat_hist_set_signals(params); - - if (params->user_hist) { - /* rtla asked to stop */ - params_u.should_run = 1; - /* all threads left */ - params_u.stopped_running = 0; - - params_u.set = ¶ms->monitored_cpus; - if (params->set_sched) - params_u.sched_param = ¶ms->sched_param; - else - params_u.sched_param = NULL; - - params_u.cgroup_name = params->cgroup_name; - - retval = pthread_create(&timerlat_u, NULL, timerlat_u_dispatcher, ¶ms_u); - if (retval) - err_msg("Error creating timerlat user-space threads\n"); - } - while (!stop_tracing) { - sleep(params->sleep_time); - - retval = tracefs_iterate_raw_events(trace->tep, - trace->inst, - NULL, - 0, - collect_registered_events, - trace); - if (retval < 0) { - err_msg("Error iterating on events\n"); - goto out_hist; - } + timerlat_bpf_wait(-1); - if (trace_is_off(&tool->trace, &record->trace)) - break; + if (!stop_tracing) { + /* Threshold overflow, perform actions on threshold */ + actions_perform(¶ms->common.threshold_actions); - /* is there still any user-threads ? */ - if (params->user_hist) { - if (params_u.stopped_running) { - debug_msg("timerlat user-space threads stopped!\n"); + if (!params->common.threshold_actions.continue_flag) + /* continue flag not set, break */ break; - } + + /* continue action reached, re-enable tracing */ + if (tool->record) + trace_instance_start(&tool->record->trace); + if (tool->aa) + trace_instance_start(&tool->aa->trace); + timerlat_bpf_restart_tracing(); } } - if (params->user_hist && !params_u.stopped_running) { - params_u.should_run = 0; - sleep(1); - } + timerlat_bpf_detach(); - timerlat_print_stats(params, tool); + retval = timerlat_hist_bpf_pull_data(tool); + if (retval) + err_msg("Error pulling BPF data\n"); - return_value = 0; - - if (trace_is_off(&tool->trace, &record->trace)) { - printf("rtla timerlat hit stop tracing\n"); + return retval; +} - if (!params->no_aa) - timerlat_auto_analysis(params->stop_us, params->stop_total_us); +static int timerlat_hist_main(struct osnoise_tool *tool) +{ + struct timerlat_params *params = to_timerlat_params(tool->params); + int retval; - if (params->trace_output) { - printf(" Saving trace to %s\n", params->trace_output); - save_trace_to_file(record->trace.inst, params->trace_output); - } - } + if (params->mode == TRACING_MODE_TRACEFS) + retval = hist_main_loop(tool); + else + retval = timerlat_hist_bpf_main_loop(tool); -out_hist: - timerlat_aa_destroy(); - if (dma_latency_fd >= 0) - close(dma_latency_fd); - trace_events_destroy(&record->trace, params->events); - params->events = NULL; -out_free: - timerlat_free_histogram(tool->data); - osnoise_destroy_tool(aa); - osnoise_destroy_tool(record); - osnoise_destroy_tool(tool); - free(params); -out_exit: - exit(return_value); + return retval; } + +struct tool_ops timerlat_hist_ops = { + .tracer = "timerlat", + .comm_prefix = "timerlat/", + .parse_args = timerlat_hist_parse_args, + .init_tool = timerlat_init_hist, + .apply_config = timerlat_hist_apply_config, + .enable = timerlat_enable, + .main = timerlat_hist_main, + .print_stats = timerlat_print_stats, + .analyze = timerlat_analyze, + .free = timerlat_free_histogram_tool, +}; diff --git a/tools/tracing/rtla/src/timerlat_top.c b/tools/tracing/rtla/src/timerlat_top.c index 1640f121baca..29c2c1f717ed 100644 --- a/tools/tracing/rtla/src/timerlat_top.c +++ b/tools/tracing/rtla/src/timerlat_top.c @@ -15,43 +15,14 @@ #include <sched.h> #include <pthread.h> -#include "utils.h" -#include "osnoise.h" #include "timerlat.h" #include "timerlat_aa.h" -#include "timerlat_u.h" - -struct timerlat_top_params { - char *cpus; - cpu_set_t monitored_cpus; - char *trace_output; - char *cgroup_name; - unsigned long long runtime; - long long stop_us; - long long stop_total_us; - long long timerlat_period_us; - long long print_stack; - int sleep_time; - int output_divisor; - int duration; - int quiet; - int set_sched; - int dma_latency; - int no_aa; - int aa_only; - int dump_tasks; - int cgroup; - int hk_cpus; - int user_top; - cpu_set_t hk_cpu_set; - struct sched_attr sched_param; - struct trace_events *events; -}; +#include "timerlat_bpf.h" struct timerlat_top_cpu { - int irq_count; - int thread_count; - int user_count; + unsigned long long irq_count; + unsigned long long thread_count; + unsigned long long user_count; unsigned long long cur_irq; unsigned long long min_irq; @@ -77,13 +48,18 @@ struct timerlat_top_data { /* * timerlat_free_top - free runtime data */ -static void -timerlat_free_top(struct timerlat_top_data *data) +static void timerlat_free_top(struct timerlat_top_data *data) { free(data->cpu_data); free(data); } +static void timerlat_free_top_tool(struct osnoise_tool *tool) +{ + timerlat_free_top(tool->data); + timerlat_free(tool); +} + /* * timerlat_alloc_histogram - alloc runtime data */ @@ -117,6 +93,37 @@ cleanup: return NULL; } +static void +timerlat_top_reset_sum(struct timerlat_top_cpu *summary) +{ + memset(summary, 0, sizeof(*summary)); + summary->min_irq = ~0; + summary->min_thread = ~0; + summary->min_user = ~0; +} + +static void +timerlat_top_update_sum(struct osnoise_tool *tool, int cpu, struct timerlat_top_cpu *sum) +{ + struct timerlat_top_data *data = tool->data; + struct timerlat_top_cpu *cpu_data = &data->cpu_data[cpu]; + + sum->irq_count += cpu_data->irq_count; + update_min(&sum->min_irq, &cpu_data->min_irq); + update_sum(&sum->sum_irq, &cpu_data->sum_irq); + update_max(&sum->max_irq, &cpu_data->max_irq); + + sum->thread_count += cpu_data->thread_count; + update_min(&sum->min_thread, &cpu_data->min_thread); + update_sum(&sum->sum_thread, &cpu_data->sum_thread); + update_max(&sum->max_thread, &cpu_data->max_thread); + + sum->user_count += cpu_data->user_count; + update_min(&sum->min_user, &cpu_data->min_user); + update_sum(&sum->sum_user, &cpu_data->sum_user); + update_max(&sum->max_user, &cpu_data->max_user); +} + /* * timerlat_hist_update - record a new timerlat occurent on cpu, updating data */ @@ -125,9 +132,13 @@ timerlat_top_update(struct osnoise_tool *tool, int cpu, unsigned long long thread, unsigned long long latency) { + struct timerlat_params *params = to_timerlat_params(tool->params); struct timerlat_top_data *data = tool->data; struct timerlat_top_cpu *cpu_data = &data->cpu_data[cpu]; + if (params->common.output_divisor) + latency = latency / params->common.output_divisor; + if (!thread) { cpu_data->irq_count++; cpu_data->cur_irq = latency; @@ -157,15 +168,13 @@ timerlat_top_handler(struct trace_seq *s, struct tep_record *record, struct tep_event *event, void *context) { struct trace_instance *trace = context; - struct timerlat_top_params *params; unsigned long long latency, thread; struct osnoise_tool *top; int cpu = record->cpu; top = container_of(trace, struct osnoise_tool, trace); - params = top->params; - if (!params->aa_only) { + if (!top->params->aa_only) { tep_get_field_val(s, event, "context", record, &thread, 1); tep_get_field_val(s, event, "timer_latency", record, &latency, 1); @@ -176,56 +185,131 @@ timerlat_top_handler(struct trace_seq *s, struct tep_record *record, } /* + * timerlat_top_bpf_pull_data - copy data from BPF maps into userspace + */ +static int timerlat_top_bpf_pull_data(struct osnoise_tool *tool) +{ + struct timerlat_top_data *data = tool->data; + int i, err; + long long value_irq[data->nr_cpus], + value_thread[data->nr_cpus], + value_user[data->nr_cpus]; + + /* Pull summary */ + err = timerlat_bpf_get_summary_value(SUMMARY_CURRENT, + value_irq, value_thread, value_user, + data->nr_cpus); + if (err) + return err; + for (i = 0; i < data->nr_cpus; i++) { + data->cpu_data[i].cur_irq = value_irq[i]; + data->cpu_data[i].cur_thread = value_thread[i]; + data->cpu_data[i].cur_user = value_user[i]; + } + + err = timerlat_bpf_get_summary_value(SUMMARY_COUNT, + value_irq, value_thread, value_user, + data->nr_cpus); + if (err) + return err; + for (i = 0; i < data->nr_cpus; i++) { + data->cpu_data[i].irq_count = value_irq[i]; + data->cpu_data[i].thread_count = value_thread[i]; + data->cpu_data[i].user_count = value_user[i]; + } + + err = timerlat_bpf_get_summary_value(SUMMARY_MIN, + value_irq, value_thread, value_user, + data->nr_cpus); + if (err) + return err; + for (i = 0; i < data->nr_cpus; i++) { + data->cpu_data[i].min_irq = value_irq[i]; + data->cpu_data[i].min_thread = value_thread[i]; + data->cpu_data[i].min_user = value_user[i]; + } + + err = timerlat_bpf_get_summary_value(SUMMARY_MAX, + value_irq, value_thread, value_user, + data->nr_cpus); + if (err) + return err; + for (i = 0; i < data->nr_cpus; i++) { + data->cpu_data[i].max_irq = value_irq[i]; + data->cpu_data[i].max_thread = value_thread[i]; + data->cpu_data[i].max_user = value_user[i]; + } + + err = timerlat_bpf_get_summary_value(SUMMARY_SUM, + value_irq, value_thread, value_user, + data->nr_cpus); + if (err) + return err; + for (i = 0; i < data->nr_cpus; i++) { + data->cpu_data[i].sum_irq = value_irq[i]; + data->cpu_data[i].sum_thread = value_thread[i]; + data->cpu_data[i].sum_user = value_user[i]; + } + + return 0; +} + +/* * timerlat_top_header - print the header of the tool output */ -static void timerlat_top_header(struct osnoise_tool *top) +static void timerlat_top_header(struct timerlat_params *params, struct osnoise_tool *top) { - struct timerlat_top_params *params = top->params; struct trace_seq *s = top->trace.seq; + bool pretty = params->common.pretty_output; char duration[26]; get_duration(top->start_time, duration, sizeof(duration)); - trace_seq_printf(s, "\033[2;37;40m"); + if (pretty) + trace_seq_printf(s, "\033[2;37;40m"); + trace_seq_printf(s, " Timer Latency "); - if (params->user_top) + if (params->common.user_data) trace_seq_printf(s, " "); - trace_seq_printf(s, "\033[0;0;0m"); + + if (pretty) + trace_seq_printf(s, "\033[0;0;0m"); trace_seq_printf(s, "\n"); trace_seq_printf(s, "%-6s | IRQ Timer Latency (%s) | Thread Timer Latency (%s)", duration, - params->output_divisor == 1 ? "ns" : "us", - params->output_divisor == 1 ? "ns" : "us"); + params->common.output_divisor == 1 ? "ns" : "us", + params->common.output_divisor == 1 ? "ns" : "us"); - if (params->user_top) { + if (params->common.user_data) { trace_seq_printf(s, " | Ret user Timer Latency (%s)", - params->output_divisor == 1 ? "ns" : "us"); + params->common.output_divisor == 1 ? "ns" : "us"); } trace_seq_printf(s, "\n"); - trace_seq_printf(s, "\033[2;30;47m"); + if (pretty) + trace_seq_printf(s, "\033[2;30;47m"); + trace_seq_printf(s, "CPU COUNT | cur min avg max | cur min avg max"); - if (params->user_top) + if (params->common.user_data) trace_seq_printf(s, " | cur min avg max"); - trace_seq_printf(s, "\033[0;0;0m"); + + if (pretty) + trace_seq_printf(s, "\033[0;0;0m"); trace_seq_printf(s, "\n"); } +static const char *no_value = " -"; + /* * timerlat_top_print - prints the output of a given CPU */ static void timerlat_top_print(struct osnoise_tool *top, int cpu) { - - struct timerlat_top_params *params = top->params; + struct timerlat_params *params = to_timerlat_params(top->params); struct timerlat_top_data *data = top->data; struct timerlat_top_cpu *cpu_data = &data->cpu_data[cpu]; - int divisor = params->output_divisor; struct trace_seq *s = top->trace.seq; - if (divisor == 0) - return; - /* * Skip if no data is available: is this cpu offline? */ @@ -235,34 +319,28 @@ static void timerlat_top_print(struct osnoise_tool *top, int cpu) /* * Unless trace is being lost, IRQ counter is always the max. */ - trace_seq_printf(s, "%3d #%-9d |", cpu, cpu_data->irq_count); + trace_seq_printf(s, "%3d #%-9llu |", cpu, cpu_data->irq_count); if (!cpu_data->irq_count) { - trace_seq_printf(s, " - "); - trace_seq_printf(s, " - "); - trace_seq_printf(s, " - "); - trace_seq_printf(s, " - |"); + trace_seq_printf(s, "%s %s %s %s |", no_value, no_value, no_value, no_value); } else { - trace_seq_printf(s, "%9llu ", cpu_data->cur_irq / params->output_divisor); - trace_seq_printf(s, "%9llu ", cpu_data->min_irq / params->output_divisor); - trace_seq_printf(s, "%9llu ", (cpu_data->sum_irq / cpu_data->irq_count) / divisor); - trace_seq_printf(s, "%9llu |", cpu_data->max_irq / divisor); + trace_seq_printf(s, "%9llu ", cpu_data->cur_irq); + trace_seq_printf(s, "%9llu ", cpu_data->min_irq); + trace_seq_printf(s, "%9llu ", cpu_data->sum_irq / cpu_data->irq_count); + trace_seq_printf(s, "%9llu |", cpu_data->max_irq); } if (!cpu_data->thread_count) { - trace_seq_printf(s, " - "); - trace_seq_printf(s, " - "); - trace_seq_printf(s, " - "); - trace_seq_printf(s, " -\n"); + trace_seq_printf(s, "%s %s %s %s", no_value, no_value, no_value, no_value); } else { - trace_seq_printf(s, "%9llu ", cpu_data->cur_thread / divisor); - trace_seq_printf(s, "%9llu ", cpu_data->min_thread / divisor); + trace_seq_printf(s, "%9llu ", cpu_data->cur_thread); + trace_seq_printf(s, "%9llu ", cpu_data->min_thread); trace_seq_printf(s, "%9llu ", - (cpu_data->sum_thread / cpu_data->thread_count) / divisor); - trace_seq_printf(s, "%9llu", cpu_data->max_thread / divisor); + cpu_data->sum_thread / cpu_data->thread_count); + trace_seq_printf(s, "%9llu", cpu_data->max_thread); } - if (!params->user_top) { + if (!params->common.user_data) { trace_seq_printf(s, "\n"); return; } @@ -270,16 +348,80 @@ static void timerlat_top_print(struct osnoise_tool *top, int cpu) trace_seq_printf(s, " |"); if (!cpu_data->user_count) { - trace_seq_printf(s, " - "); - trace_seq_printf(s, " - "); - trace_seq_printf(s, " - "); - trace_seq_printf(s, " -\n"); + trace_seq_printf(s, "%s %s %s %s\n", no_value, no_value, no_value, no_value); + } else { + trace_seq_printf(s, "%9llu ", cpu_data->cur_user); + trace_seq_printf(s, "%9llu ", cpu_data->min_user); + trace_seq_printf(s, "%9llu ", + cpu_data->sum_user / cpu_data->user_count); + trace_seq_printf(s, "%9llu\n", cpu_data->max_user); + } +} + +/* + * timerlat_top_print_sum - prints the summary output + */ +static void +timerlat_top_print_sum(struct osnoise_tool *top, struct timerlat_top_cpu *summary) +{ + const char *split = "----------------------------------------"; + struct timerlat_params *params = to_timerlat_params(top->params); + unsigned long long count = summary->irq_count; + struct trace_seq *s = top->trace.seq; + int e = 0; + + /* + * Skip if no data is available: is this cpu offline? + */ + if (!summary->irq_count && !summary->thread_count) + return; + + while (count > 999999) { + e++; + count /= 10; + } + + trace_seq_printf(s, "%.*s|%.*s|%.*s", 15, split, 40, split, 39, split); + if (params->common.user_data) + trace_seq_printf(s, "-|%.*s", 39, split); + trace_seq_printf(s, "\n"); + + trace_seq_printf(s, "ALL #%-6llu e%d |", count, e); + + if (!summary->irq_count) { + trace_seq_printf(s, " %s %s %s |", no_value, no_value, no_value); + } else { + trace_seq_printf(s, " "); + trace_seq_printf(s, "%9llu ", summary->min_irq); + trace_seq_printf(s, "%9llu ", summary->sum_irq / summary->irq_count); + trace_seq_printf(s, "%9llu |", summary->max_irq); + } + + if (!summary->thread_count) { + trace_seq_printf(s, "%s %s %s %s", no_value, no_value, no_value, no_value); + } else { + trace_seq_printf(s, " "); + trace_seq_printf(s, "%9llu ", summary->min_thread); + trace_seq_printf(s, "%9llu ", + summary->sum_thread / summary->thread_count); + trace_seq_printf(s, "%9llu", summary->max_thread); + } + + if (!params->common.user_data) { + trace_seq_printf(s, "\n"); + return; + } + + trace_seq_printf(s, " |"); + + if (!summary->user_count) { + trace_seq_printf(s, " %s %s %s |", no_value, no_value, no_value); } else { - trace_seq_printf(s, "%9llu ", cpu_data->cur_user / divisor); - trace_seq_printf(s, "%9llu ", cpu_data->min_user / divisor); + trace_seq_printf(s, " "); + trace_seq_printf(s, "%9llu ", summary->min_user); trace_seq_printf(s, "%9llu ", - (cpu_data->sum_user / cpu_data->user_count) / divisor); - trace_seq_printf(s, "%9llu\n", cpu_data->max_user / divisor); + summary->sum_user / summary->user_count); + trace_seq_printf(s, "%9llu\n", summary->max_user); } } @@ -296,45 +438,51 @@ static void clear_terminal(struct trace_seq *seq) * timerlat_print_stats - print data for all cpus */ static void -timerlat_print_stats(struct timerlat_top_params *params, struct osnoise_tool *top) +timerlat_print_stats(struct osnoise_tool *top) { + struct timerlat_params *params = to_timerlat_params(top->params); struct trace_instance *trace = &top->trace; + struct timerlat_top_cpu summary; static int nr_cpus = -1; int i; - if (params->aa_only) + if (params->common.aa_only) return; if (nr_cpus == -1) nr_cpus = sysconf(_SC_NPROCESSORS_CONF); - if (!params->quiet) + if (!params->common.quiet) clear_terminal(trace->seq); - timerlat_top_header(top); + timerlat_top_reset_sum(&summary); + + timerlat_top_header(params, top); - for (i = 0; i < nr_cpus; i++) { - if (params->cpus && !CPU_ISSET(i, ¶ms->monitored_cpus)) - continue; + for_each_monitored_cpu(i, nr_cpus, ¶ms->common) { timerlat_top_print(top, i); + timerlat_top_update_sum(top, i, &summary); } + timerlat_top_print_sum(top, &summary); + trace_seq_do_printf(trace->seq); trace_seq_reset(trace->seq); + osnoise_report_missed_events(top); } /* * timerlat_top_usage - prints timerlat top usage message */ -static void timerlat_top_usage(char *usage) +static void timerlat_top_usage(void) { int i; static const char *const msg[] = { "", " usage: rtla timerlat [top] [-h] [-q] [-a us] [-d s] [-D] [-n] [-p us] [-i us] [-T us] [-s us] \\", - " [[-t[=file]] [-e sys[:event]] [--filter <filter>] [--trigger <trigger>] [-c cpu-list] [-H cpu-list]\\", - " [-P priority] [--dma-latency us] [--aa-only us] [-C[=cgroup_name]] [-u]", + " [[-t [file]] [-e sys[:event]] [--filter <filter>] [--trigger <trigger>] [-c cpu-list] [-H cpu-list]\\", + " [-P priority] [--dma-latency us] [--aa-only us] [-C [cgroup_name]] [-u|-k] [--warm-up s] [--deepest-idle-state n]", "", " -h/--help: print this menu", " -a/--auto: set automatic trace mode, stopping the session if argument in us latency is hit", @@ -345,11 +493,11 @@ static void timerlat_top_usage(char *usage) " -s/--stack us: save the stack trace at the IRQ if a thread latency is higher than the argument in us", " -c/--cpus cpus: run the tracer only on the given cpus", " -H/--house-keeping cpus: run rtla control threads only on the given cpus", - " -C/--cgroup[=cgroup_name]: set cgroup, if no cgroup_name is passed, the rtla's cgroup will be inherited", - " -d/--duration time[m|h|d]: duration of the session in seconds", + " -C/--cgroup [cgroup_name]: set cgroup, if no cgroup_name is passed, the rtla's cgroup will be inherited", + " -d/--duration time[s|m|h|d]: duration of the session", " -D/--debug: print debug info", " --dump-tasks: prints the task running on all CPUs if stop conditions are met (depends on !--no-aa)", - " -t/--trace[=file]: save the stopped trace to [file|timerlat_trace.txt]", + " -t/--trace [file]: save the stopped trace to [file|timerlat_trace.txt]", " -e/--event <sys:event>: enable the <sys:event> in the trace instance, multiple -e are allowed", " --filter <command>: enable a trace event filter to the previous -e event", " --trigger <command>: enable a trace event trigger to the previous -e event", @@ -363,42 +511,57 @@ static void timerlat_top_usage(char *usage) " f:prio - use SCHED_FIFO with prio", " d:runtime[us|ms|s]:period[us|ms|s] - use SCHED_DEADLINE with runtime and period", " in nanoseconds", - " -u/--user-threads: use rtla user-space threads instead of in-kernel timerlat threads", + " -u/--user-threads: use rtla user-space threads instead of kernel-space timerlat threads", + " -k/--kernel-threads: use timerlat kernel-space threads instead of rtla user-space threads", + " -U/--user-load: enable timerlat for user-defined user-space workload", + " --warm-up s: let the workload run for s seconds before collecting data", + " --trace-buffer-size kB: set the per-cpu trace buffer size in kB", + " --deepest-idle-state n: only go down to idle state n on cpus used by timerlat to reduce exit from idle latency", + " --on-threshold <action>: define action to be executed at latency threshold, multiple are allowed", + " --on-end: define action to be executed at measurement end, multiple are allowed", NULL, }; - if (usage) - fprintf(stderr, "%s\n", usage); - fprintf(stderr, "rtla timerlat top: a per-cpu summary of the timer latency (version %s)\n", VERSION); for (i = 0; msg[i]; i++) fprintf(stderr, "%s\n", msg[i]); - exit(1); + + exit(EXIT_SUCCESS); } /* * timerlat_top_parse_args - allocs, parse and fill the cmd line parameters */ -static struct timerlat_top_params +static struct common_params *timerlat_top_parse_args(int argc, char **argv) { - struct timerlat_top_params *params; + struct timerlat_params *params; struct trace_events *tevent; long long auto_thresh; int retval; int c; + char *trace_output = NULL; params = calloc(1, sizeof(*params)); if (!params) exit(1); + actions_init(¶ms->common.threshold_actions); + actions_init(¶ms->common.end_actions); + /* disabled by default */ params->dma_latency = -1; + /* disabled by default */ + params->deepest_idle_state = -2; + /* display data in microseconds */ - params->output_divisor = 1000; + params->common.output_divisor = 1000; + + /* default to BPF mode */ + params->mode = TRACING_MODE_BPF; while (1) { static struct option long_options[] = { @@ -419,20 +582,24 @@ static struct timerlat_top_params {"thread", required_argument, 0, 'T'}, {"trace", optional_argument, 0, 't'}, {"user-threads", no_argument, 0, 'u'}, + {"kernel-threads", no_argument, 0, 'k'}, + {"user-load", no_argument, 0, 'U'}, {"trigger", required_argument, 0, '0'}, {"filter", required_argument, 0, '1'}, {"dma-latency", required_argument, 0, '2'}, {"no-aa", no_argument, 0, '3'}, {"dump-tasks", no_argument, 0, '4'}, {"aa-only", required_argument, 0, '5'}, + {"warm-up", required_argument, 0, '6'}, + {"trace-buffer-size", required_argument, 0, '7'}, + {"deepest-idle-state", required_argument, 0, '8'}, + {"on-threshold", required_argument, 0, '9'}, + {"on-end", required_argument, 0, '\1'}, {0, 0, 0, 0} }; - /* getopt_long stores the option index here. */ - int option_index = 0; - - c = getopt_long(argc, argv, "a:c:C::d:De:hH:i:np:P:qs:t::T:u0:1:2:345:", - long_options, &option_index); + c = getopt_long(argc, argv, "a:c:C::d:De:hH:i:knp:P:qs:t::T:uU0:1:2:345:6:7:", + long_options, NULL); /* detect the end of the options. */ if (c == -1) @@ -443,141 +610,130 @@ static struct timerlat_top_params auto_thresh = get_llong_from_str(optarg); /* set thread stop to auto_thresh */ - params->stop_total_us = auto_thresh; - params->stop_us = auto_thresh; + params->common.stop_total_us = auto_thresh; + params->common.stop_us = auto_thresh; /* get stack trace */ params->print_stack = auto_thresh; /* set trace */ - params->trace_output = "timerlat_trace.txt"; + if (!trace_output) + trace_output = "timerlat_trace.txt"; + break; case '5': /* it is here because it is similar to -a */ auto_thresh = get_llong_from_str(optarg); /* set thread stop to auto_thresh */ - params->stop_total_us = auto_thresh; - params->stop_us = auto_thresh; + params->common.stop_total_us = auto_thresh; + params->common.stop_us = auto_thresh; /* get stack trace */ params->print_stack = auto_thresh; /* set aa_only to avoid parsing the trace */ - params->aa_only = 1; + params->common.aa_only = 1; break; case 'c': - retval = parse_cpu_set(optarg, ¶ms->monitored_cpus); + retval = parse_cpu_set(optarg, ¶ms->common.monitored_cpus); if (retval) - timerlat_top_usage("\nInvalid -c cpu list\n"); - params->cpus = optarg; + fatal("Invalid -c cpu list"); + params->common.cpus = optarg; break; case 'C': - params->cgroup = 1; - if (!optarg) { - /* will inherit this cgroup */ - params->cgroup_name = NULL; - } else if (*optarg == '=') { - /* skip the = */ - params->cgroup_name = ++optarg; - } + params->common.cgroup = 1; + params->common.cgroup_name = optarg; break; case 'D': config_debug = 1; break; case 'd': - params->duration = parse_seconds_duration(optarg); - if (!params->duration) - timerlat_top_usage("Invalid -D duration\n"); + params->common.duration = parse_seconds_duration(optarg); + if (!params->common.duration) + fatal("Invalid -d duration"); break; case 'e': tevent = trace_event_alloc(optarg); - if (!tevent) { - err_msg("Error alloc trace event"); - exit(EXIT_FAILURE); - } + if (!tevent) + fatal("Error alloc trace event"); - if (params->events) - tevent->next = params->events; - params->events = tevent; + if (params->common.events) + tevent->next = params->common.events; + params->common.events = tevent; break; case 'h': case '?': - timerlat_top_usage(NULL); + timerlat_top_usage(); break; case 'H': - params->hk_cpus = 1; - retval = parse_cpu_set(optarg, ¶ms->hk_cpu_set); - if (retval) { - err_msg("Error parsing house keeping CPUs\n"); - exit(EXIT_FAILURE); - } + params->common.hk_cpus = 1; + retval = parse_cpu_set(optarg, ¶ms->common.hk_cpu_set); + if (retval) + fatal("Error parsing house keeping CPUs"); break; case 'i': - params->stop_us = get_llong_from_str(optarg); + params->common.stop_us = get_llong_from_str(optarg); + break; + case 'k': + params->common.kernel_workload = true; break; case 'n': - params->output_divisor = 1; + params->common.output_divisor = 1; break; case 'p': params->timerlat_period_us = get_llong_from_str(optarg); if (params->timerlat_period_us > 1000000) - timerlat_top_usage("Period longer than 1 s\n"); + fatal("Period longer than 1 s"); break; case 'P': - retval = parse_prio(optarg, ¶ms->sched_param); + retval = parse_prio(optarg, ¶ms->common.sched_param); if (retval == -1) - timerlat_top_usage("Invalid -P priority"); - params->set_sched = 1; + fatal("Invalid -P priority"); + params->common.set_sched = 1; break; case 'q': - params->quiet = 1; + params->common.quiet = 1; break; case 's': params->print_stack = get_llong_from_str(optarg); break; case 'T': - params->stop_total_us = get_llong_from_str(optarg); + params->common.stop_total_us = get_llong_from_str(optarg); break; case 't': - if (optarg) - /* skip = */ - params->trace_output = &optarg[1]; - else - params->trace_output = "timerlat_trace.txt"; - + trace_output = parse_optional_arg(argc, argv); + if (!trace_output) + trace_output = "timerlat_trace.txt"; break; case 'u': - params->user_top = true; + params->common.user_workload = true; + /* fallback: -u implies -U */ + case 'U': + params->common.user_data = true; break; case '0': /* trigger */ - if (params->events) { - retval = trace_event_add_trigger(params->events, optarg); - if (retval) { - err_msg("Error adding trigger %s\n", optarg); - exit(EXIT_FAILURE); - } + if (params->common.events) { + retval = trace_event_add_trigger(params->common.events, optarg); + if (retval) + fatal("Error adding trigger %s", optarg); } else { - timerlat_top_usage("--trigger requires a previous -e\n"); + fatal("--trigger requires a previous -e"); } break; case '1': /* filter */ - if (params->events) { - retval = trace_event_add_filter(params->events, optarg); - if (retval) { - err_msg("Error adding filter %s\n", optarg); - exit(EXIT_FAILURE); - } + if (params->common.events) { + retval = trace_event_add_filter(params->common.events, optarg); + if (retval) + fatal("Error adding filter %s", optarg); } else { - timerlat_top_usage("--filter requires a previous -e\n"); + fatal("--filter requires a previous -e"); } break; case '2': /* dma-latency */ params->dma_latency = get_llong_from_str(optarg); - if (params->dma_latency < 0 || params->dma_latency > 10000) { - err_msg("--dma-latency needs to be >= 0 and < 10000"); - exit(EXIT_FAILURE); - } + if (params->dma_latency < 0 || params->dma_latency > 10000) + fatal("--dma-latency needs to be >= 0 and < 10000"); break; case '3': /* no-aa */ params->no_aa = 1; @@ -585,110 +741,78 @@ static struct timerlat_top_params case '4': params->dump_tasks = 1; break; + case '6': + params->common.warmup = get_llong_from_str(optarg); + break; + case '7': + params->common.buffer_size = get_llong_from_str(optarg); + break; + case '8': + params->deepest_idle_state = get_llong_from_str(optarg); + break; + case '9': + retval = actions_parse(¶ms->common.threshold_actions, optarg, + "timerlat_trace.txt"); + if (retval) + fatal("Invalid action %s", optarg); + break; + case '\1': + retval = actions_parse(¶ms->common.end_actions, optarg, + "timerlat_trace.txt"); + if (retval) + fatal("Invalid action %s", optarg); + break; default: - timerlat_top_usage("Invalid option"); + fatal("Invalid option"); } } - if (geteuid()) { - err_msg("rtla needs root permission\n"); - exit(EXIT_FAILURE); - } + if (trace_output) + actions_add_trace_output(¶ms->common.threshold_actions, trace_output); + + if (geteuid()) + fatal("rtla needs root permission"); /* * Auto analysis only happens if stop tracing, thus: */ - if (!params->stop_us && !params->stop_total_us) + if (!params->common.stop_us && !params->common.stop_total_us) params->no_aa = 1; - if (params->no_aa && params->aa_only) - timerlat_top_usage("--no-aa and --aa-only are mutually exclusive!"); + if (params->no_aa && params->common.aa_only) + fatal("--no-aa and --aa-only are mutually exclusive!"); - return params; + if (params->common.kernel_workload && params->common.user_workload) + fatal("--kernel-threads and --user-threads are mutually exclusive!"); + + /* + * If auto-analysis or trace output is enabled, switch from BPF mode to + * mixed mode + */ + if (params->mode == TRACING_MODE_BPF && + (params->common.threshold_actions.present[ACTION_TRACE_OUTPUT] || + params->common.end_actions.present[ACTION_TRACE_OUTPUT] || + !params->no_aa)) + params->mode = TRACING_MODE_MIXED; + + return ¶ms->common; } /* * timerlat_top_apply_config - apply the top configs to the initialized tool */ static int -timerlat_top_apply_config(struct osnoise_tool *top, struct timerlat_top_params *params) +timerlat_top_apply_config(struct osnoise_tool *top) { + struct timerlat_params *params = to_timerlat_params(top->params); int retval; - int i; - - if (!params->sleep_time) - params->sleep_time = 1; - - if (params->cpus) { - retval = osnoise_set_cpus(top->context, params->cpus); - if (retval) { - err_msg("Failed to apply CPUs config\n"); - goto out_err; - } - } else { - for (i = 0; i < sysconf(_SC_NPROCESSORS_CONF); i++) - CPU_SET(i, ¶ms->monitored_cpus); - } - - if (params->stop_us) { - retval = osnoise_set_stop_us(top->context, params->stop_us); - if (retval) { - err_msg("Failed to set stop us\n"); - goto out_err; - } - } - - if (params->stop_total_us) { - retval = osnoise_set_stop_total_us(top->context, params->stop_total_us); - if (retval) { - err_msg("Failed to set stop total us\n"); - goto out_err; - } - } - - - if (params->timerlat_period_us) { - retval = osnoise_set_timerlat_period_us(top->context, params->timerlat_period_us); - if (retval) { - err_msg("Failed to set timerlat period\n"); - goto out_err; - } - } - - if (params->print_stack) { - retval = osnoise_set_print_stack(top->context, params->print_stack); - if (retval) { - err_msg("Failed to set print stack\n"); - goto out_err; - } - } + retval = timerlat_apply_config(top, params); + if (retval) + goto out_err; - if (params->hk_cpus) { - retval = sched_setaffinity(getpid(), sizeof(params->hk_cpu_set), - ¶ms->hk_cpu_set); - if (retval == -1) { - err_msg("Failed to set rtla to the house keeping CPUs\n"); - goto out_err; - } - } else if (params->cpus) { - /* - * Even if the user do not set a house-keeping CPU, try to - * move rtla to a CPU set different to the one where the user - * set the workload to run. - * - * No need to check results as this is an automatic attempt. - */ - auto_house_keeping(¶ms->monitored_cpus); - } - - if (params->user_top) { - retval = osnoise_set_workload(top->context, 0); - if (retval) { - err_msg("Failed to set OSNOISE_WORKLOAD option\n"); - goto out_err; - } - } + if (isatty(STDOUT_FILENO) && !params->common.quiet) + params->common.pretty_output = 1; return 0; @@ -700,7 +824,7 @@ out_err: * timerlat_init_top - initialize a timerlat top tool with parameters */ static struct osnoise_tool -*timerlat_init_top(struct timerlat_top_params *params) +*timerlat_init_top(struct common_params *params) { struct osnoise_tool *top; int nr_cpus; @@ -715,8 +839,6 @@ static struct osnoise_tool if (!top->data) goto out_err; - top->params = params; - tep_register_event_handler(top->trace.tep, -1, "ftrace", "timerlat", timerlat_top_handler, top); @@ -727,239 +849,87 @@ out_err: return NULL; } -static int stop_tracing; -static void stop_top(int sig) -{ - stop_tracing = 1; -} - /* - * timerlat_top_set_signals - handles the signal to stop the tool + * timerlat_top_bpf_main_loop - main loop to process events (BPF variant) */ -static void -timerlat_top_set_signals(struct timerlat_top_params *params) -{ - signal(SIGINT, stop_top); - if (params->duration) { - signal(SIGALRM, stop_top); - alarm(params->duration); - } -} - -int timerlat_top_main(int argc, char *argv[]) +static int +timerlat_top_bpf_main_loop(struct osnoise_tool *tool) { - struct timerlat_top_params *params; - struct osnoise_tool *record = NULL; - struct timerlat_u_params params_u; - struct osnoise_tool *top = NULL; - struct osnoise_tool *aa = NULL; - struct trace_instance *trace; - int dma_latency_fd = -1; - pthread_t timerlat_u; - int return_value = 1; - char *max_lat; - int retval; + struct timerlat_params *params = to_timerlat_params(tool->params); + int retval, wait_retval; - params = timerlat_top_parse_args(argc, argv); - if (!params) - exit(1); - - top = timerlat_init_top(params); - if (!top) { - err_msg("Could not init osnoise top\n"); - goto out_exit; + if (params->common.aa_only) { + /* Auto-analysis only, just wait for stop tracing */ + timerlat_bpf_wait(-1); + return 0; } - retval = timerlat_top_apply_config(top, params); - if (retval) { - err_msg("Could not apply config\n"); - goto out_free; - } - - trace = &top->trace; - - retval = enable_timerlat(trace); - if (retval) { - err_msg("Failed to enable timerlat tracer\n"); - goto out_free; - } + /* Pull and display data in a loop */ + while (!stop_tracing) { + wait_retval = timerlat_bpf_wait(params->common.quiet ? -1 : + params->common.sleep_time); - if (params->set_sched) { - retval = set_comm_sched_attr("timerlat/", ¶ms->sched_param); + retval = timerlat_top_bpf_pull_data(tool); if (retval) { - err_msg("Failed to set sched parameters\n"); - goto out_free; - } - } - - if (params->cgroup && !params->user_top) { - retval = set_comm_cgroup("timerlat/", params->cgroup_name); - if (!retval) { - err_msg("Failed to move threads to cgroup\n"); - goto out_free; + err_msg("Error pulling BPF data\n"); + return retval; } - } - if (params->dma_latency >= 0) { - dma_latency_fd = set_cpu_dma_latency(params->dma_latency); - if (dma_latency_fd < 0) { - err_msg("Could not set /dev/cpu_dma_latency.\n"); - goto out_free; - } - } - - if (params->trace_output) { - record = osnoise_init_trace_tool("timerlat"); - if (!record) { - err_msg("Failed to enable the trace instance\n"); - goto out_free; - } - - if (params->events) { - retval = trace_events_enable(&record->trace, params->events); - if (retval) - goto out_top; - } - } - - if (!params->no_aa) { - if (params->aa_only) { - /* as top is not used for display, use it for aa */ - aa = top; - } else { - /* otherwise, a new instance is needed */ - aa = osnoise_init_tool("timerlat_aa"); - if (!aa) - goto out_top; - } - - retval = timerlat_aa_init(aa, params->dump_tasks); - if (retval) { - err_msg("Failed to enable the auto analysis instance\n"); - goto out_top; - } + if (!params->common.quiet) + timerlat_print_stats(tool); - /* if it is re-using the main instance, there is no need to start it */ - if (aa != top) { - retval = enable_timerlat(&aa->trace); - if (retval) { - err_msg("Failed to enable timerlat tracer\n"); - goto out_top; - } - } - } + if (wait_retval != 0) { + /* Stopping requested by tracer */ + actions_perform(¶ms->common.threshold_actions); - /* - * Start the tracers here, after having set all instances. - * - * Let the trace instance start first for the case of hitting a stop - * tracing while enabling other instances. The trace instance is the - * one with most valuable information. - */ - if (params->trace_output) - trace_instance_start(&record->trace); - if (!params->no_aa && aa != top) - trace_instance_start(&aa->trace); - trace_instance_start(trace); - - top->start_time = time(NULL); - timerlat_top_set_signals(params); - - if (params->user_top) { - /* rtla asked to stop */ - params_u.should_run = 1; - /* all threads left */ - params_u.stopped_running = 0; - - params_u.set = ¶ms->monitored_cpus; - if (params->set_sched) - params_u.sched_param = ¶ms->sched_param; - else - params_u.sched_param = NULL; - - params_u.cgroup_name = params->cgroup_name; - - retval = pthread_create(&timerlat_u, NULL, timerlat_u_dispatcher, ¶ms_u); - if (retval) - err_msg("Error creating timerlat user-space threads\n"); - } + if (!params->common.threshold_actions.continue_flag) + /* continue flag not set, break */ + break; - while (!stop_tracing) { - sleep(params->sleep_time); - - if (params->aa_only && !trace_is_off(&top->trace, &record->trace)) - continue; - - retval = tracefs_iterate_raw_events(trace->tep, - trace->inst, - NULL, - 0, - collect_registered_events, - trace); - if (retval < 0) { - err_msg("Error iterating on events\n"); - goto out_top; + /* continue action reached, re-enable tracing */ + if (tool->record) + trace_instance_start(&tool->record->trace); + if (tool->aa) + trace_instance_start(&tool->aa->trace); + timerlat_bpf_restart_tracing(); } - if (!params->quiet) - timerlat_print_stats(params, top); - - if (trace_is_off(&top->trace, &record->trace)) - break; - /* is there still any user-threads ? */ - if (params->user_top) { - if (params_u.stopped_running) { + if (params->common.user_workload) { + if (params->common.user.stopped_running) { debug_msg("timerlat user space threads stopped!\n"); break; } } } - if (params->user_top && !params_u.stopped_running) { - params_u.should_run = 0; - sleep(1); - } - - timerlat_print_stats(params, top); - - return_value = 0; - - if (trace_is_off(&top->trace, &record->trace)) { - printf("rtla timerlat hit stop tracing\n"); + return 0; +} - if (!params->no_aa) - timerlat_auto_analysis(params->stop_us, params->stop_total_us); +static int timerlat_top_main_loop(struct osnoise_tool *tool) +{ + struct timerlat_params *params = to_timerlat_params(tool->params); + int retval; - if (params->trace_output) { - printf(" Saving trace to %s\n", params->trace_output); - save_trace_to_file(record->trace.inst, params->trace_output); - } - } else if (params->aa_only) { - /* - * If the trace did not stop with --aa-only, at least print the - * max known latency. - */ - max_lat = tracefs_instance_file_read(trace->inst, "tracing_max_latency", NULL); - if (max_lat) { - printf(" Max latency was %s\n", max_lat); - free(max_lat); - } + if (params->mode == TRACING_MODE_TRACEFS) { + retval = top_main_loop(tool); + } else { + retval = timerlat_top_bpf_main_loop(tool); + timerlat_bpf_detach(); } -out_top: - timerlat_aa_destroy(); - if (dma_latency_fd >= 0) - close(dma_latency_fd); - trace_events_destroy(&record->trace, params->events); - params->events = NULL; -out_free: - timerlat_free_top(top->data); - if (aa && aa != top) - osnoise_destroy_tool(aa); - osnoise_destroy_tool(record); - osnoise_destroy_tool(top); - free(params); -out_exit: - exit(return_value); + return retval; } + +struct tool_ops timerlat_top_ops = { + .tracer = "timerlat", + .comm_prefix = "timerlat/", + .parse_args = timerlat_top_parse_args, + .init_tool = timerlat_init_top, + .apply_config = timerlat_top_apply_config, + .enable = timerlat_enable, + .main = timerlat_top_main_loop, + .print_stats = timerlat_print_stats, + .analyze = timerlat_analyze, + .free = timerlat_free_top_tool, +}; diff --git a/tools/tracing/rtla/src/timerlat_u.c b/tools/tracing/rtla/src/timerlat_u.c index 05e310696dd5..ce68e39d25fd 100644 --- a/tools/tracing/rtla/src/timerlat_u.c +++ b/tools/tracing/rtla/src/timerlat_u.c @@ -45,16 +45,14 @@ static int timerlat_u_main(int cpu, struct timerlat_u_params *params) retval = sched_setaffinity(gettid(), sizeof(set), &set); if (retval == -1) { - err_msg("Error setting user thread affinity\n"); + debug_msg("Error setting user thread affinity %d, is the CPU online?\n", cpu); exit(1); } if (!params->sched_param) { retval = sched_setscheduler(0, SCHED_FIFO, &sp); - if (retval < 0) { - err_msg("Error setting timerlat u default priority: %s\n", strerror(errno)); - exit(1); - } + if (retval < 0) + fatal("Error setting timerlat u default priority: %s", strerror(errno)); } else { retval = __set_sched_attr(getpid(), params->sched_param); if (retval) { @@ -78,10 +76,8 @@ static int timerlat_u_main(int cpu, struct timerlat_u_params *params) snprintf(buffer, sizeof(buffer), "osnoise/per_cpu/cpu%d/timerlat_fd", cpu); timerlat_fd = tracefs_instance_file_open(NULL, buffer, O_RDONLY); - if (timerlat_fd < 0) { - err_msg("Error opening %s:%s\n", buffer, strerror(errno)); - exit(1); - } + if (timerlat_fd < 0) + fatal("Error opening %s:%s", buffer, strerror(errno)); debug_msg("User-space timerlat pid %d on cpu %d\n", gettid(), cpu); @@ -193,7 +189,9 @@ void *timerlat_u_dispatcher(void *data) procs_count--; } } - break; + + if (!procs_count) + break; } sleep(1); diff --git a/tools/tracing/rtla/src/trace.c b/tools/tracing/rtla/src/trace.c index e1ba6d9f4265..69cbc48d53d3 100644 --- a/tools/tracing/rtla/src/trace.c +++ b/tools/tracing/rtla/src/trace.c @@ -75,12 +75,16 @@ int save_trace_to_file(struct tracefs_instance *inst, const char *filename) int out_fd, in_fd; int retval = -1; + if (!inst || !filename) + return 0; + in_fd = tracefs_instance_file_open(inst, file, O_RDONLY); if (in_fd < 0) { err_msg("Failed to open trace file\n"); return -1; } + printf(" Saving trace to %s\n", filename); out_fd = creat(filename, mode); if (out_fd < 0) { err_msg("Failed to create output file %s\n", filename); @@ -118,6 +122,8 @@ collect_registered_events(struct tep_event *event, struct tep_record *record, struct trace_instance *trace = context; struct trace_seq *s = trace->seq; + trace->processed_events++; + if (!event->handler) return 0; @@ -127,6 +133,31 @@ collect_registered_events(struct tep_event *event, struct tep_record *record, } /* + * collect_missed_events - record number of missed events + * + * If rtla cannot keep up with events generated by tracer, events are going + * to fall out of the ring buffer. + * Collect how many events were missed so it can be reported to the user. + */ +static int +collect_missed_events(struct tep_event *event, struct tep_record *record, + int cpu, void *context) +{ + struct trace_instance *trace = context; + + if (trace->missed_events == UINT64_MAX) + return 0; + + if (record->missed_events > 0) + trace->missed_events += record->missed_events; + else + /* Events missed but no data on how many */ + trace->missed_events = UINT64_MAX; + + return 0; +} + +/* * trace_instance_destroy - destroy and free a rtla trace instance */ void trace_instance_destroy(struct trace_instance *trace) @@ -181,6 +212,17 @@ int trace_instance_init(struct trace_instance *trace, char *tool_name) */ tracefs_trace_off(trace->inst); + /* + * Collect the number of events missed due to tracefs buffer + * overflow. + */ + trace->missed_events = 0; + tracefs_follow_missed_events(trace->inst, + collect_missed_events, + trace); + + trace->processed_events = 0; + return 0; out_err: @@ -197,6 +239,14 @@ int trace_instance_start(struct trace_instance *trace) } /* + * trace_instance_stop - stop tracing a given rtla instance + */ +int trace_instance_stop(struct trace_instance *trace) +{ + return tracefs_trace_off(trace->inst); +} + +/* * trace_events_free - free a list of trace events */ static void trace_events_free(struct trace_events *events) @@ -522,21 +572,17 @@ void trace_events_destroy(struct trace_instance *instance, trace_events_free(events); } -int trace_is_off(struct trace_instance *tool, struct trace_instance *trace) +/* + * trace_set_buffer_size - set the per-cpu tracing buffer size. + */ +int trace_set_buffer_size(struct trace_instance *trace, int size) { - /* - * The tool instance is always present, it is the one used to collect - * data. - */ - if (!tracefs_trace_is_on(tool->inst)) - return 1; + int retval; - /* - * The trace instance is only enabled when -t is set. IOW, when the system - * is tracing. - */ - if (trace && !tracefs_trace_is_on(trace->inst)) - return 1; + debug_msg("Setting trace buffer size to %d Kb\n", size); + retval = tracefs_instance_set_buffer_size(trace->inst, size, -1); + if (retval) + err_msg("Error setting trace buffer size\n"); - return 0; + return retval; } diff --git a/tools/tracing/rtla/src/trace.h b/tools/tracing/rtla/src/trace.h index 2e9a89a25615..1e5aee4b828d 100644 --- a/tools/tracing/rtla/src/trace.h +++ b/tools/tracing/rtla/src/trace.h @@ -17,19 +17,19 @@ struct trace_instance { struct tracefs_instance *inst; struct tep_handle *tep; struct trace_seq *seq; + unsigned long long missed_events; + unsigned long long processed_events; }; int trace_instance_init(struct trace_instance *trace, char *tool_name); int trace_instance_start(struct trace_instance *trace); +int trace_instance_stop(struct trace_instance *trace); void trace_instance_destroy(struct trace_instance *trace); struct trace_seq *get_trace_seq(void); int enable_tracer_by_name(struct tracefs_instance *inst, const char *tracer_name); void disable_tracer(struct tracefs_instance *inst); -int enable_osnoise(struct trace_instance *trace); -int enable_timerlat(struct trace_instance *trace); - struct tracefs_instance *create_instance(char *instance_name); void destroy_instance(struct tracefs_instance *inst); @@ -47,4 +47,4 @@ int trace_events_enable(struct trace_instance *instance, int trace_event_add_filter(struct trace_events *event, char *filter); int trace_event_add_trigger(struct trace_events *event, char *trigger); -int trace_is_off(struct trace_instance *tool, struct trace_instance *trace); +int trace_set_buffer_size(struct trace_instance *trace, int size); diff --git a/tools/tracing/rtla/src/utils.c b/tools/tracing/rtla/src/utils.c index 623a38908ed5..9cf5a0098e9a 100644 --- a/tools/tracing/rtla/src/utils.c +++ b/tools/tracing/rtla/src/utils.c @@ -4,6 +4,9 @@ */ #define _GNU_SOURCE +#ifdef HAVE_LIBCPUPOWER_SUPPORT +#include <cpuidle.h> +#endif /* HAVE_LIBCPUPOWER_SUPPORT */ #include <dirent.h> #include <stdarg.h> #include <stdlib.h> @@ -54,6 +57,21 @@ void debug_msg(const char *fmt, ...) } /* + * fatal - print an error message and EOL to stderr and exit with ERROR + */ +void fatal(const char *fmt, ...) +{ + va_list ap; + + va_start(ap, fmt); + vfprintf(stderr, fmt, ap); + va_end(ap); + fprintf(stderr, "\n"); + + exit(ERROR); +} + +/* * get_llong_from_str - get a long long int from a string */ long long get_llong_from_str(char *start) @@ -211,45 +229,37 @@ long parse_ns_duration(char *val) /* * This is a set of helper functions to use SCHED_DEADLINE. */ -#ifdef __x86_64__ -# define __NR_sched_setattr 314 -# define __NR_sched_getattr 315 -#elif __i386__ -# define __NR_sched_setattr 351 -# define __NR_sched_getattr 352 -#elif __arm__ -# define __NR_sched_setattr 380 -# define __NR_sched_getattr 381 -#elif __aarch64__ || __riscv -# define __NR_sched_setattr 274 -# define __NR_sched_getattr 275 -#elif __powerpc__ -# define __NR_sched_setattr 355 -# define __NR_sched_getattr 356 -#elif __s390x__ -# define __NR_sched_setattr 345 -# define __NR_sched_getattr 346 +#ifndef __NR_sched_setattr +# ifdef __x86_64__ +# define __NR_sched_setattr 314 +# elif __i386__ +# define __NR_sched_setattr 351 +# elif __arm__ +# define __NR_sched_setattr 380 +# elif __aarch64__ || __riscv +# define __NR_sched_setattr 274 +# elif __powerpc__ +# define __NR_sched_setattr 355 +# elif __s390x__ +# define __NR_sched_setattr 345 +# elif __loongarch__ +# define __NR_sched_setattr 274 +# endif #endif #define SCHED_DEADLINE 6 -static inline int sched_setattr(pid_t pid, const struct sched_attr *attr, +static inline int syscall_sched_setattr(pid_t pid, const struct sched_attr *attr, unsigned int flags) { return syscall(__NR_sched_setattr, pid, attr, flags); } -static inline int sched_getattr(pid_t pid, struct sched_attr *attr, - unsigned int size, unsigned int flags) -{ - return syscall(__NR_sched_getattr, pid, attr, size, flags); -} - int __set_sched_attr(int pid, struct sched_attr *attr) { int flags = 0; int retval; - retval = sched_setattr(pid, attr, flags); + retval = syscall_sched_setattr(pid, attr, flags); if (retval < 0) { err_msg("Failed to set sched attributes to the pid %d: %s\n", pid, strerror(errno)); @@ -479,13 +489,13 @@ int parse_prio(char *arg, struct sched_attr *sched_param) if (prio == INVALID_VAL) return -1; - if (prio < sched_get_priority_min(SCHED_OTHER)) + if (prio < MIN_NICE) return -1; - if (prio > sched_get_priority_max(SCHED_OTHER)) + if (prio > MAX_NICE) return -1; sched_param->sched_policy = SCHED_OTHER; - sched_param->sched_priority = prio; + sched_param->sched_nice = prio; break; default: return -1; @@ -525,6 +535,153 @@ int set_cpu_dma_latency(int32_t latency) return fd; } +#ifdef HAVE_LIBCPUPOWER_SUPPORT +static unsigned int **saved_cpu_idle_disable_state; +static size_t saved_cpu_idle_disable_state_alloc_ctr; + +/* + * save_cpu_idle_state_disable - save disable for all idle states of a cpu + * + * Saves the current disable of all idle states of a cpu, to be subsequently + * restored via restore_cpu_idle_disable_state. + * + * Return: idle state count on success, negative on error + */ +int save_cpu_idle_disable_state(unsigned int cpu) +{ + unsigned int nr_states; + unsigned int state; + int disabled; + int nr_cpus; + + nr_states = cpuidle_state_count(cpu); + + if (nr_states == 0) + return 0; + + if (saved_cpu_idle_disable_state == NULL) { + nr_cpus = sysconf(_SC_NPROCESSORS_CONF); + saved_cpu_idle_disable_state = calloc(nr_cpus, sizeof(unsigned int *)); + if (!saved_cpu_idle_disable_state) + return -1; + } + + saved_cpu_idle_disable_state[cpu] = calloc(nr_states, sizeof(unsigned int)); + if (!saved_cpu_idle_disable_state[cpu]) + return -1; + saved_cpu_idle_disable_state_alloc_ctr++; + + for (state = 0; state < nr_states; state++) { + disabled = cpuidle_is_state_disabled(cpu, state); + if (disabled < 0) + return disabled; + saved_cpu_idle_disable_state[cpu][state] = disabled; + } + + return nr_states; +} + +/* + * restore_cpu_idle_disable_state - restore disable for all idle states of a cpu + * + * Restores the current disable state of all idle states of a cpu that was + * previously saved by save_cpu_idle_disable_state. + * + * Return: idle state count on success, negative on error + */ +int restore_cpu_idle_disable_state(unsigned int cpu) +{ + unsigned int nr_states; + unsigned int state; + int disabled; + int result; + + nr_states = cpuidle_state_count(cpu); + + if (nr_states == 0) + return 0; + + if (!saved_cpu_idle_disable_state) + return -1; + + for (state = 0; state < nr_states; state++) { + if (!saved_cpu_idle_disable_state[cpu]) + return -1; + disabled = saved_cpu_idle_disable_state[cpu][state]; + result = cpuidle_state_disable(cpu, state, disabled); + if (result < 0) + return result; + } + + free(saved_cpu_idle_disable_state[cpu]); + saved_cpu_idle_disable_state[cpu] = NULL; + saved_cpu_idle_disable_state_alloc_ctr--; + if (saved_cpu_idle_disable_state_alloc_ctr == 0) { + free(saved_cpu_idle_disable_state); + saved_cpu_idle_disable_state = NULL; + } + + return nr_states; +} + +/* + * free_cpu_idle_disable_states - free saved idle state disable for all cpus + * + * Frees the memory used for storing cpu idle state disable for all cpus + * and states. + * + * Normally, the memory is freed automatically in + * restore_cpu_idle_disable_state; this is mostly for cleaning up after an + * error. + */ +void free_cpu_idle_disable_states(void) +{ + int cpu; + int nr_cpus; + + if (!saved_cpu_idle_disable_state) + return; + + nr_cpus = sysconf(_SC_NPROCESSORS_CONF); + + for (cpu = 0; cpu < nr_cpus; cpu++) { + free(saved_cpu_idle_disable_state[cpu]); + saved_cpu_idle_disable_state[cpu] = NULL; + } + + free(saved_cpu_idle_disable_state); + saved_cpu_idle_disable_state = NULL; +} + +/* + * set_deepest_cpu_idle_state - limit idle state of cpu + * + * Disables all idle states deeper than the one given in + * deepest_state (assuming states with higher number are deeper). + * + * This is used to reduce the exit from idle latency. Unlike + * set_cpu_dma_latency, it can disable idle states per cpu. + * + * Return: idle state count on success, negative on error + */ +int set_deepest_cpu_idle_state(unsigned int cpu, unsigned int deepest_state) +{ + unsigned int nr_states; + unsigned int state; + int result; + + nr_states = cpuidle_state_count(cpu); + + for (state = deepest_state + 1; state < nr_states; state++) { + result = cpuidle_state_disable(cpu, state, 1); + if (result < 0) + return result; + } + + return nr_states; +} +#endif /* HAVE_LIBCPUPOWER_SUPPORT */ + #define _STR(x) #x #define STR(x) _STR(x) @@ -536,9 +693,9 @@ int set_cpu_dma_latency(int32_t latency) */ static const int find_mount(const char *fs, char *mp, int sizeof_mp) { - char mount_point[MAX_PATH]; + char mount_point[MAX_PATH+1]; char type[100]; - int found; + int found = 0; FILE *fp; fp = fopen("/proc/mounts", "r"); @@ -817,3 +974,29 @@ int auto_house_keeping(cpu_set_t *monitored_cpus) return 1; } + +/** + * parse_optional_arg - Parse optional argument value + * + * Parse optional argument value, which can be in the form of: + * -sarg, -s/--long=arg, -s/--long arg + * + * Returns arg value if found, NULL otherwise. + */ +char *parse_optional_arg(int argc, char **argv) +{ + if (optarg) { + if (optarg[0] == '=') { + /* skip the = */ + return &optarg[1]; + } else { + return optarg; + } + /* parse argument of form -s [arg] and --long [arg]*/ + } else if (optind < argc && argv[optind][0] != '-') { + /* consume optind */ + return argv[optind++]; + } else { + return NULL; + } +} diff --git a/tools/tracing/rtla/src/utils.h b/tools/tracing/rtla/src/utils.h index 04ed1e650495..091df4ba4587 100644 --- a/tools/tracing/rtla/src/utils.h +++ b/tools/tracing/rtla/src/utils.h @@ -9,6 +9,8 @@ */ #define BUFF_U64_STR_SIZE 24 #define MAX_PATH 1024 +#define MAX_NICE 20 +#define MIN_NICE -19 #define container_of(ptr, type, member)({ \ const typeof(((type *)0)->member) *__mptr = (ptr); \ @@ -17,11 +19,13 @@ extern int config_debug; void debug_msg(const char *fmt, ...); void err_msg(const char *fmt, ...); +void fatal(const char *fmt, ...); long parse_seconds_duration(char *val); void get_duration(time_t start_time, char *output, int output_size); int parse_cpu_list(char *cpu_list, char **monitored_cpus); +char *parse_optional_arg(int argc, char **argv); long long get_llong_from_str(char *start); static inline void @@ -44,6 +48,7 @@ update_sum(unsigned long long *a, unsigned long long *b) *a += *b; } +#ifndef SCHED_ATTR_SIZE_VER0 struct sched_attr { uint32_t size; uint32_t sched_policy; @@ -54,6 +59,7 @@ struct sched_attr { uint64_t sched_deadline; uint64_t sched_period; }; +#endif /* SCHED_ATTR_SIZE_VER0 */ int parse_prio(char *arg, struct sched_attr *sched_param); int parse_cpu_set(char *cpu_list, cpu_set_t *set); @@ -62,7 +68,26 @@ int set_comm_sched_attr(const char *comm_prefix, struct sched_attr *attr); int set_comm_cgroup(const char *comm_prefix, const char *cgroup); int set_pid_cgroup(pid_t pid, const char *cgroup); int set_cpu_dma_latency(int32_t latency); +#ifdef HAVE_LIBCPUPOWER_SUPPORT +int save_cpu_idle_disable_state(unsigned int cpu); +int restore_cpu_idle_disable_state(unsigned int cpu); +void free_cpu_idle_disable_states(void); +int set_deepest_cpu_idle_state(unsigned int cpu, unsigned int state); +static inline int have_libcpupower_support(void) { return 1; } +#else +static inline int save_cpu_idle_disable_state(unsigned int cpu) { return -1; } +static inline int restore_cpu_idle_disable_state(unsigned int cpu) { return -1; } +static inline void free_cpu_idle_disable_states(void) { } +static inline int set_deepest_cpu_idle_state(unsigned int cpu, unsigned int state) { return -1; } +static inline int have_libcpupower_support(void) { return 0; } +#endif /* HAVE_LIBCPUPOWER_SUPPORT */ int auto_house_keeping(cpu_set_t *monitored_cpus); #define ns_to_usf(x) (((double)x/1000)) #define ns_to_per(total, part) ((part * 100) / (double)total) + +enum result { + PASSED = 0, /* same as EXIT_SUCCESS */ + ERROR = 1, /* same as EXIT_FAILURE, an error in arguments */ + FAILED = 2, /* test hit the stop tracing condition */ +}; diff --git a/tools/tracing/rtla/tests/engine.sh b/tools/tracing/rtla/tests/engine.sh new file mode 100644 index 000000000000..c7de3d6ed6a8 --- /dev/null +++ b/tools/tracing/rtla/tests/engine.sh @@ -0,0 +1,140 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +test_begin() { + # Count tests to allow the test harness to double-check if all were + # included correctly. + ctr=0 + [ -z "$RTLA" ] && RTLA="./rtla" + [ -n "$TEST_COUNT" ] && echo "1..$TEST_COUNT" +} + +reset_osnoise() { + # Reset osnoise options to default and remove any dangling instances created + # by improperly exited rtla runs. + pushd /sys/kernel/tracing >/dev/null || return 1 + + # Remove dangling instances created by previous rtla run + echo 0 > tracing_thresh + cd instances + for i in osnoise_top osnoise_hist timerlat_top timerlat_hist + do + [ ! -d "$i" ] && continue + rmdir "$i" + done + + # Reset options to default + # Note: those are copied from the default values of osnoise_data + # in kernel/trace/trace_osnoise.c + cd ../osnoise + echo all > cpus + echo DEFAULTS > options + echo 1000000 > period_us + echo 0 > print_stack + echo 1000000 > runtime_us + echo 0 > stop_tracing_total_us + echo 0 > stop_tracing_us + echo 1000 > timerlat_period_us + + popd >/dev/null +} + +check() { + test_name=$0 + tested_command=$1 + expected_exitcode=${3:-0} + expected_output=$4 + unexpected_output=$5 + # Simple check: run rtla with given arguments and test exit code. + # If TEST_COUNT is set, run the test. Otherwise, just count. + ctr=$(($ctr + 1)) + if [ -n "$TEST_COUNT" ] + then + # Reset osnoise options before running test. + [ "$NO_RESET_OSNOISE" == 1 ] || reset_osnoise + # Run rtla; in case of failure, include its output as comment + # in the test results. + result=$(eval stdbuf -oL $TIMEOUT "$RTLA" $2 2>&1); exitcode=$? + failbuf='' + fail=0 + + # Test if the results matches if requested + if [ -n "$expected_output" ] && ! grep -qE "$expected_output" <<< "$result" + then + fail=1 + failbuf+=$(printf "# Output match failed: \"%s\"" "$expected_output") + failbuf+=$'\n' + fi + + if [ -n "$unexpected_output" ] && grep -qE "$unexpected_output" <<< "$result" + then + fail=1 + failbuf+=$(printf "# Output non-match failed: \"%s\"" "$unexpected_output") + failbuf+=$'\n' + fi + + if [ $exitcode -eq $expected_exitcode ] && [ $fail -eq 0 ] + then + echo "ok $ctr - $1" + else + # Add rtla output and exit code as comments in case of failure + echo "not ok $ctr - $1" + echo -n "$failbuf" + echo "$result" | col -b | while read line; do echo "# $line"; done + printf "#\n# exit code %s\n" $exitcode + fi + fi +} + +check_with_osnoise_options() { + # Do the same as "check", but with pre-set osnoise options. + # Note: rtla should reset the osnoise options, this is used to test + # if it indeed does so. + # Save original arguments + arg1=$1 + arg2=$2 + arg3=$3 + + # Apply osnoise options (if not dry run) + if [ -n "$TEST_COUNT" ] + then + [ "$NO_RESET_OSNOISE" == 1 ] || reset_osnoise + shift + shift + while shift + do + [ "$1" == "" ] && continue + option=$(echo $1 | cut -d '=' -f 1) + value=$(echo $1 | cut -d '=' -f 2) + echo "option: $option, value: $value" + echo "$value" > "/sys/kernel/tracing/osnoise/$option" || return 1 + done + fi + + NO_RESET_OSNOISE=1 check "$arg1" "$arg2" "$arg3" +} + +set_timeout() { + TIMEOUT="timeout -v -k 15s $1" +} + +unset_timeout() { + unset TIMEOUT +} + +set_no_reset_osnoise() { + NO_RESET_OSNOISE=1 +} + +unset_no_reset_osnoise() { + unset NO_RESET_OSNOISE +} + +test_end() { + # If running without TEST_COUNT, tests are not actually run, just + # counted. In that case, re-run the test with the correct count. + [ -z "$TEST_COUNT" ] && TEST_COUNT=$ctr exec bash $0 || true +} + +# Avoid any environmental discrepancies +export LC_ALL=C +unset_timeout diff --git a/tools/tracing/rtla/tests/hwnoise.t b/tools/tracing/rtla/tests/hwnoise.t new file mode 100644 index 000000000000..23ce250a6852 --- /dev/null +++ b/tools/tracing/rtla/tests/hwnoise.t @@ -0,0 +1,22 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +source tests/engine.sh +test_begin + +set_timeout 2m + +check "verify help page" \ + "hwnoise --help" 0 "summary of hardware-related noise" +check "detect noise higher than one microsecond" \ + "hwnoise -c 0 -T 1 -d 5s -q" 0 +check "set the automatic trace mode" \ + "hwnoise -a 5 -d 10s" 2 "osnoise hit stop tracing" +check "set scheduling param to the osnoise tracer threads" \ + "hwnoise -P F:1 -c 0 -r 900000 -d 10s -q" +check "stop the trace if a single sample is higher than 1 us" \ + "hwnoise -s 1 -T 1 -t -d 10s" 2 "Saving trace to osnoise_trace.txt" +check "enable a trace event trigger" \ + "hwnoise -t -e osnoise:irq_noise --trigger=\"hist:key=desc,duration:sort=desc,duration:vals=hitcount\" -d 10s" \ + 0 "Saving event osnoise:irq_noise hist to osnoise_irq_noise_hist.txt" + +test_end diff --git a/tools/tracing/rtla/tests/osnoise.t b/tools/tracing/rtla/tests/osnoise.t new file mode 100644 index 000000000000..396334608920 --- /dev/null +++ b/tools/tracing/rtla/tests/osnoise.t @@ -0,0 +1,50 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +source tests/engine.sh +test_begin + +set_timeout 2m + +check "verify help page" \ + "osnoise --help" 0 "osnoise version" +check "verify the --priority/-P param" \ + "osnoise top -P F:1 -c 0 -r 900000 -d 10s -q -S 1 --on-threshold shell,command=\"tests/scripts/check-priority.sh osnoise/ SCHED_FIFO 1\"" \ + 2 "Priorities are set correctly" +check "verify the --stop/-s param" \ + "osnoise top -s 30 -T 1" 2 "osnoise hit stop tracing" +check "verify the --trace param" \ + "osnoise hist -s 30 -T 1 -t" 2 "Saving trace to osnoise_trace.txt" +check "verify the --entries/-E param" \ + "osnoise hist -P F:1 -c 0 -r 900000 -d 10s -b 10 -E 25" + +# Test setting default period by putting an absurdly high period +# and stopping on threshold. +# If default period is not set, this will time out. +check_with_osnoise_options "apply default period" \ + "osnoise hist -s 1" 2 period_us=600000000 + +# Actions tests +check "trace output through -t with custom filename" \ + "osnoise hist -S 2 -t custom_filename.txt" 2 "^ Saving trace to custom_filename.txt$" +check "trace output through --on-threshold trace" \ + "osnoise hist -S 2 --on-threshold trace" 2 "^ Saving trace to osnoise_trace.txt$" +check "trace output through --on-threshold trace with custom filename" \ + "osnoise hist -S 2 --on-threshold trace,file=custom_filename.txt" 2 "^ Saving trace to custom_filename.txt$" +check "exec command" \ + "osnoise hist -S 2 --on-threshold shell,command='echo TestOutput'" 2 "^TestOutput$" +check "multiple actions" \ + "osnoise hist -S 2 --on-threshold shell,command='echo -n 1' --on-threshold shell,command='echo 2'" 2 "^12$" +check "hist stop at failed action" \ + "osnoise hist -S 2 --on-threshold shell,command='echo -n 1; false' --on-threshold shell,command='echo -n 2'" 2 "^1# RTLA osnoise histogram$" +check "top stop at failed action" \ + "osnoise top -S 2 --on-threshold shell,command='echo -n abc; false' --on-threshold shell,command='echo -n defgh'" 2 "^abc" "defgh" +check "hist with continue" \ + "osnoise hist -S 2 -d 5s --on-threshold shell,command='echo TestOutput' --on-threshold continue" 0 "^TestOutput$" +check "top with continue" \ + "osnoise top -q -S 2 -d 5s --on-threshold shell,command='echo TestOutput' --on-threshold continue" 0 "^TestOutput$" +check "hist with trace output at end" \ + "osnoise hist -d 1s --on-end trace" 0 "^ Saving trace to osnoise_trace.txt$" +check "top with trace output at end" \ + "osnoise top -d 1s --on-end trace" 0 "^ Saving trace to osnoise_trace.txt$" + +test_end diff --git a/tools/tracing/rtla/tests/scripts/check-priority.sh b/tools/tracing/rtla/tests/scripts/check-priority.sh new file mode 100755 index 000000000000..79b702a34a96 --- /dev/null +++ b/tools/tracing/rtla/tests/scripts/check-priority.sh @@ -0,0 +1,8 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +pids="$(pgrep ^$1)" || exit 1 +for pid in $pids +do + chrt -p $pid | cut -d ':' -f 2 | head -n1 | grep "^ $2\$" >/dev/null + chrt -p $pid | cut -d ':' -f 2 | tail -n1 | grep "^ $3\$" >/dev/null +done && echo "Priorities are set correctly" diff --git a/tools/tracing/rtla/tests/timerlat.t b/tools/tracing/rtla/tests/timerlat.t new file mode 100644 index 000000000000..bbaa1897d8a8 --- /dev/null +++ b/tools/tracing/rtla/tests/timerlat.t @@ -0,0 +1,72 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +source tests/engine.sh +test_begin + +set_timeout 2m +timerlat_sample_event='/sys/kernel/tracing/events/osnoise/timerlat_sample' + +if ldd $RTLA | grep libbpf >/dev/null && [ -d "$timerlat_sample_event" ] +then + # rtla build with BPF and system supports BPF mode + no_bpf_options='0 1' +else + no_bpf_options='1' +fi + +# Do every test with and without BPF +for option in $no_bpf_options +do +export RTLA_NO_BPF=$option + +# Basic tests +check "verify help page" \ + "timerlat --help" 0 "timerlat version" +check "verify -s/--stack" \ + "timerlat top -s 3 -T 10 -t" 2 "Blocking thread stack trace" +check "verify -P/--priority" \ + "timerlat top -P F:1 -c 0 -d 10s -q -T 1 --on-threshold shell,command=\"tests/scripts/check-priority.sh timerlatu/ SCHED_FIFO 1\"" \ + 2 "Priorities are set correctly" +check "test in nanoseconds" \ + "timerlat top -i 2 -c 0 -n -d 10s" 2 "ns" +check "set the automatic trace mode" \ + "timerlat top -a 5" 2 "analyzing it" +check "dump tasks" \ + "timerlat top -a 5 --dump-tasks" 2 "Printing CPU tasks" +check "print the auto-analysis if hits the stop tracing condition" \ + "timerlat top --aa-only 5" 2 +check "disable auto-analysis" \ + "timerlat top -s 3 -T 10 -t --no-aa" 2 +check "verify -c/--cpus" \ + "timerlat hist -c 0 -d 10s" +check "hist test in nanoseconds" \ + "timerlat hist -i 2 -c 0 -n -d 10s" 2 "ns" + +# Actions tests +check "trace output through -t" \ + "timerlat hist -T 2 -t" 2 "^ Saving trace to timerlat_trace.txt$" +check "trace output through -t with custom filename" \ + "timerlat hist -T 2 -t custom_filename.txt" 2 "^ Saving trace to custom_filename.txt$" +check "trace output through --on-threshold trace" \ + "timerlat hist -T 2 --on-threshold trace" 2 "^ Saving trace to timerlat_trace.txt$" +check "trace output through --on-threshold trace with custom filename" \ + "timerlat hist -T 2 --on-threshold trace,file=custom_filename.txt" 2 "^ Saving trace to custom_filename.txt$" +check "exec command" \ + "timerlat hist -T 2 --on-threshold shell,command='echo TestOutput'" 2 "^TestOutput$" +check "multiple actions" \ + "timerlat hist -T 2 --on-threshold shell,command='echo -n 1' --on-threshold shell,command='echo 2'" 2 "^12$" +check "hist stop at failed action" \ + "timerlat hist -T 2 --on-threshold shell,command='echo -n 1; false' --on-threshold shell,command='echo -n 2'" 2 "^1# RTLA timerlat histogram$" +check "top stop at failed action" \ + "timerlat top -T 2 --on-threshold shell,command='echo -n abc; false' --on-threshold shell,command='echo -n defgh'" 2 "^abc" "defgh" +check "hist with continue" \ + "timerlat hist -T 2 -d 5s --on-threshold shell,command='echo TestOutput' --on-threshold continue" 0 "^TestOutput$" +check "top with continue" \ + "timerlat top -q -T 2 -d 5s --on-threshold shell,command='echo TestOutput' --on-threshold continue" 0 "^TestOutput$" +check "hist with trace output at end" \ + "timerlat hist -d 1s --on-end trace" 0 "^ Saving trace to timerlat_trace.txt$" +check "top with trace output at end" \ + "timerlat top -d 1s --on-end trace" 0 "^ Saving trace to timerlat_trace.txt$" +done + +test_end |