diff options
Diffstat (limited to 'tools')
33 files changed, 1399 insertions, 282 deletions
diff --git a/tools/objtool/arch/x86/decode.c b/tools/objtool/arch/x86/decode.c index 33d861c04ebd..3ce7b54003c2 100644 --- a/tools/objtool/arch/x86/decode.c +++ b/tools/objtool/arch/x86/decode.c @@ -522,7 +522,7 @@ int arch_decode_instruction(struct objtool_file *file, const struct section *sec case INAT_PFX_REPNE: if (modrm == 0xca) /* eretu/erets */ - insn->type = INSN_CONTEXT_SWITCH; + insn->type = INSN_SYSRET; break; default: if (modrm == 0xca) @@ -535,11 +535,15 @@ int arch_decode_instruction(struct objtool_file *file, const struct section *sec insn->type = INSN_JUMP_CONDITIONAL; - } else if (op2 == 0x05 || op2 == 0x07 || op2 == 0x34 || - op2 == 0x35) { + } else if (op2 == 0x05 || op2 == 0x34) { - /* sysenter, sysret */ - insn->type = INSN_CONTEXT_SWITCH; + /* syscall, sysenter */ + insn->type = INSN_SYSCALL; + + } else if (op2 == 0x07 || op2 == 0x35) { + + /* sysret, sysexit */ + insn->type = INSN_SYSRET; } else if (op2 == 0x0b || op2 == 0xb9) { @@ -676,7 +680,7 @@ int arch_decode_instruction(struct objtool_file *file, const struct section *sec case 0xca: /* retf */ case 0xcb: /* retf */ - insn->type = INSN_CONTEXT_SWITCH; + insn->type = INSN_SYSRET; break; case 0xe0: /* loopne */ @@ -721,7 +725,7 @@ int arch_decode_instruction(struct objtool_file *file, const struct section *sec } else if (modrm_reg == 5) { /* jmpf */ - insn->type = INSN_CONTEXT_SWITCH; + insn->type = INSN_SYSRET; } else if (modrm_reg == 6) { diff --git a/tools/objtool/arch/x86/special.c b/tools/objtool/arch/x86/special.c index 403e587676f1..06ca4a2659a4 100644 --- a/tools/objtool/arch/x86/special.c +++ b/tools/objtool/arch/x86/special.c @@ -126,7 +126,7 @@ struct reloc *arch_find_switch_table(struct objtool_file *file, * indicates a rare GCC quirk/bug which can leave dead * code behind. */ - if (reloc_type(text_reloc) == R_X86_64_PC32) { + if (!file->ignore_unreachables && reloc_type(text_reloc) == R_X86_64_PC32) { WARN_INSN(insn, "ignoring unreachables due to jump table quirk"); file->ignore_unreachables = true; } diff --git a/tools/objtool/check.c b/tools/objtool/check.c index 4a1f6c3169b3..b649049b6a11 100644 --- a/tools/objtool/check.c +++ b/tools/objtool/check.c @@ -3505,6 +3505,34 @@ next_orig: return next_insn_same_sec(file, alt_group->orig_group->last_insn); } +static bool skip_alt_group(struct instruction *insn) +{ + struct instruction *alt_insn = insn->alts ? insn->alts->insn : NULL; + + /* ANNOTATE_IGNORE_ALTERNATIVE */ + if (insn->alt_group && insn->alt_group->ignore) + return true; + + /* + * For NOP patched with CLAC/STAC, only follow the latter to avoid + * impossible code paths combining patched CLAC with unpatched STAC + * or vice versa. + * + * ANNOTATE_IGNORE_ALTERNATIVE could have been used here, but Linus + * requested not to do that to avoid hurting .s file readability + * around CLAC/STAC alternative sites. + */ + + if (!alt_insn) + return false; + + /* Don't override ASM_{CLAC,STAC}_UNSAFE */ + if (alt_insn->alt_group && alt_insn->alt_group->ignore) + return false; + + return alt_insn->type == INSN_CLAC || alt_insn->type == INSN_STAC; +} + /* * Follow the branch starting at the given instruction, and recursively follow * any other branches (jumps). Meanwhile, track the frame pointer state at @@ -3625,7 +3653,7 @@ static int validate_branch(struct objtool_file *file, struct symbol *func, } } - if (insn->alt_group && insn->alt_group->ignore) + if (skip_alt_group(insn)) return 0; if (handle_insn_ops(insn, next_insn, &state)) @@ -3684,14 +3712,20 @@ static int validate_branch(struct objtool_file *file, struct symbol *func, break; - case INSN_CONTEXT_SWITCH: - if (func) { - if (!next_insn || !next_insn->hint) { - WARN_INSN(insn, "unsupported instruction in callable function"); - return 1; - } - break; + case INSN_SYSCALL: + if (func && (!next_insn || !next_insn->hint)) { + WARN_INSN(insn, "unsupported instruction in callable function"); + return 1; + } + + break; + + case INSN_SYSRET: + if (func && (!next_insn || !next_insn->hint)) { + WARN_INSN(insn, "unsupported instruction in callable function"); + return 1; } + return 0; case INSN_STAC: @@ -3886,6 +3920,12 @@ static int validate_unret(struct objtool_file *file, struct instruction *insn) WARN_INSN(insn, "RET before UNTRAIN"); return 1; + case INSN_SYSCALL: + break; + + case INSN_SYSRET: + return 0; + case INSN_NOP: if (insn->retpoline_safe) return 0; @@ -3895,6 +3935,9 @@ static int validate_unret(struct objtool_file *file, struct instruction *insn) break; } + if (insn->dead_end) + return 0; + if (!next) { WARN_INSN(insn, "teh end!"); return 1; diff --git a/tools/objtool/include/objtool/arch.h b/tools/objtool/include/objtool/arch.h index 089a1acc48a8..01ef6f415adf 100644 --- a/tools/objtool/include/objtool/arch.h +++ b/tools/objtool/include/objtool/arch.h @@ -19,7 +19,8 @@ enum insn_type { INSN_CALL, INSN_CALL_DYNAMIC, INSN_RETURN, - INSN_CONTEXT_SWITCH, + INSN_SYSCALL, + INSN_SYSRET, INSN_BUG, INSN_NOP, INSN_STAC, diff --git a/tools/testing/kunit/kunit_parser.py b/tools/testing/kunit/kunit_parser.py index da53a709773a..c176487356e6 100644 --- a/tools/testing/kunit/kunit_parser.py +++ b/tools/testing/kunit/kunit_parser.py @@ -809,6 +809,10 @@ def parse_test(lines: LineStream, expected_num: int, log: List[str], is_subtest: test.log.extend(parse_diagnostic(lines)) if test.name != "" and not peek_test_name_match(lines, test): test.add_error(printer, 'missing subtest result line!') + elif not lines: + print_log(test.log, printer) + test.status = TestStatus.NO_TESTS + test.add_error(printer, 'No more test results!') else: parse_test_result(lines, test, expected_num, printer) diff --git a/tools/testing/kunit/kunit_tool_test.py b/tools/testing/kunit/kunit_tool_test.py index 5ff4f6ffd873..bbba921e0eac 100755 --- a/tools/testing/kunit/kunit_tool_test.py +++ b/tools/testing/kunit/kunit_tool_test.py @@ -371,8 +371,8 @@ class KUnitParserTest(unittest.TestCase): """ result = kunit_parser.parse_run_tests(output.splitlines(), stdout) # Missing test results after test plan should alert a suspected test crash. - self.assertEqual(kunit_parser.TestStatus.TEST_CRASHED, result.status) - self.assertEqual(result.counts, kunit_parser.TestCounts(passed=1, crashed=1, errors=1)) + self.assertEqual(kunit_parser.TestStatus.SUCCESS, result.status) + self.assertEqual(result.counts, kunit_parser.TestCounts(passed=1, errors=2)) def line_stream_from_strs(strs: Iterable[str]) -> kunit_parser.LineStream: return kunit_parser.LineStream(enumerate(strs, start=1)) diff --git a/tools/testing/memblock/internal.h b/tools/testing/memblock/internal.h index 1cf82acb2a3e..0ab4b53bb4f3 100644 --- a/tools/testing/memblock/internal.h +++ b/tools/testing/memblock/internal.h @@ -24,4 +24,10 @@ static inline void accept_memory(phys_addr_t start, unsigned long size) { } +static inline unsigned long free_reserved_area(void *start, void *end, + int poison, const char *s) +{ + return 0; +} + #endif diff --git a/tools/testing/memblock/linux/mutex.h b/tools/testing/memblock/linux/mutex.h new file mode 100644 index 000000000000..ae3f497165d6 --- /dev/null +++ b/tools/testing/memblock/linux/mutex.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _MUTEX_H +#define _MUTEX_H + +#define DEFINE_MUTEX(name) int name + +static inline void dummy_mutex_guard(int *name) +{ +} + +#define guard(mutex) \ + dummy_##mutex##_guard + +#endif /* _MUTEX_H */
\ No newline at end of file diff --git a/tools/testing/selftests/.gitignore b/tools/testing/selftests/.gitignore index cb24124ac5b9..674aaa02e396 100644 --- a/tools/testing/selftests/.gitignore +++ b/tools/testing/selftests/.gitignore @@ -4,7 +4,6 @@ gpiogpio-hammer gpioinclude/ gpiolsgpio kselftest_install/ -tpm2/SpaceTest.log # Python bytecode and cache __pycache__/ diff --git a/tools/testing/selftests/bpf/config.x86_64 b/tools/testing/selftests/bpf/config.x86_64 index 5680befae8c6..5e713ef7caa3 100644 --- a/tools/testing/selftests/bpf/config.x86_64 +++ b/tools/testing/selftests/bpf/config.x86_64 @@ -39,7 +39,6 @@ CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPUSETS=y -CONFIG_CRC_T10DIF=y CONFIG_CRYPTO_BLAKE2B=y CONFIG_CRYPTO_SEQIV=y CONFIG_CRYPTO_XXHASH=y diff --git a/tools/testing/selftests/bpf/prog_tests/res_spin_lock.c b/tools/testing/selftests/bpf/prog_tests/res_spin_lock.c index 115287ba441b..0703e987df89 100644 --- a/tools/testing/selftests/bpf/prog_tests/res_spin_lock.c +++ b/tools/testing/selftests/bpf/prog_tests/res_spin_lock.c @@ -25,8 +25,11 @@ static void *spin_lock_thread(void *arg) while (!READ_ONCE(skip)) { err = bpf_prog_test_run_opts(prog_fd, &topts); - ASSERT_OK(err, "test_run"); - ASSERT_OK(topts.retval, "test_run retval"); + if (err || topts.retval) { + ASSERT_OK(err, "test_run"); + ASSERT_OK(topts.retval, "test_run retval"); + break; + } } pthread_exit(arg); } diff --git a/tools/testing/selftests/bpf/progs/res_spin_lock.c b/tools/testing/selftests/bpf/progs/res_spin_lock.c index b33385dfbd35..22c4fb8b9266 100644 --- a/tools/testing/selftests/bpf/progs/res_spin_lock.c +++ b/tools/testing/selftests/bpf/progs/res_spin_lock.c @@ -38,13 +38,14 @@ int res_spin_lock_test(struct __sk_buff *ctx) r = bpf_res_spin_lock(&elem1->lock); if (r) return r; - if (!bpf_res_spin_lock(&elem2->lock)) { + r = bpf_res_spin_lock(&elem2->lock); + if (!r) { bpf_res_spin_unlock(&elem2->lock); bpf_res_spin_unlock(&elem1->lock); return -1; } bpf_res_spin_unlock(&elem1->lock); - return 0; + return r != -EDEADLK; } SEC("tc") @@ -124,12 +125,15 @@ int res_spin_lock_test_held_lock_max(struct __sk_buff *ctx) /* Trigger AA, after exhausting entries in the held lock table. This * time, only the timeout can save us, as AA detection won't succeed. */ - if (!bpf_res_spin_lock(locks[34])) { + ret = bpf_res_spin_lock(locks[34]); + if (!ret) { bpf_res_spin_unlock(locks[34]); ret = 1; goto end; } + ret = ret != -ETIMEDOUT ? 2 : 0; + end: for (i = i - 1; i >= 0; i--) bpf_res_spin_unlock(locks[i]); diff --git a/tools/testing/selftests/cgroup/test_cpuset_prs.sh b/tools/testing/selftests/cgroup/test_cpuset_prs.sh index 400a696a0d21..a17256d9f88a 100755 --- a/tools/testing/selftests/cgroup/test_cpuset_prs.sh +++ b/tools/testing/selftests/cgroup/test_cpuset_prs.sh @@ -88,22 +88,32 @@ echo "" > test/cpuset.cpus # If isolated CPUs have been reserved at boot time (as shown in # cpuset.cpus.isolated), these isolated CPUs should be outside of CPUs 0-8 # that will be used by this script for testing purpose. If not, some of -# the tests may fail incorrectly. These pre-isolated CPUs should stay in -# an isolated state throughout the testing process for now. +# the tests may fail incorrectly. Wait a bit and retry again just in case +# these isolated CPUs are leftover from previous run and have just been +# cleaned up earlier in this script. +# +# These pre-isolated CPUs should stay in an isolated state throughout the +# testing process for now. # BOOT_ISOLCPUS=$(cat $CGROUP2/cpuset.cpus.isolated) +[[ -n "$BOOT_ISOLCPUS" ]] && { + sleep 0.5 + BOOT_ISOLCPUS=$(cat $CGROUP2/cpuset.cpus.isolated) +} if [[ -n "$BOOT_ISOLCPUS" ]] then [[ $(echo $BOOT_ISOLCPUS | sed -e "s/[,-].*//") -le 8 ]] && skip_test "Pre-isolated CPUs ($BOOT_ISOLCPUS) overlap CPUs to be tested" echo "Pre-isolated CPUs: $BOOT_ISOLCPUS" fi + cleanup() { online_cpus cd $CGROUP2 - rmdir A1/A2/A3 A1/A2 A1 B1 > /dev/null 2>&1 - rmdir test > /dev/null 2>&1 + rmdir A1/A2/A3 A1/A2 A1 B1 test/A1 test/B1 test > /dev/null 2>&1 + rmdir rtest/p1/c11 rtest/p1/c12 rtest/p2/c21 \ + rtest/p2/c22 rtest/p1 rtest/p2 rtest > /dev/null 2>&1 [[ -n "$SCHED_DEBUG" ]] && echo "$SCHED_DEBUG" > /sys/kernel/debug/sched/verbose } @@ -173,14 +183,22 @@ test_add_proc() # # Cgroup test hierarchy # -# root -- A1 -- A2 -- A3 -# +- B1 +# root +# | +# +------+------+ +# | | +# A1 B1 +# | +# A2 +# | +# A3 # # P<v> = set cpus.partition (0:member, 1:root, 2:isolated) # C<l> = add cpu-list to cpuset.cpus # X<l> = add cpu-list to cpuset.cpus.exclusive # S<p> = use prefix in subtree_control # T = put a task into cgroup +# CX<l> = add cpu-list to both cpuset.cpus and cpuset.cpus.exclusive # O<c>=<v> = Write <v> to CPU online file of <c> # # ECPUs - effective CPUs of cpusets @@ -207,130 +225,129 @@ TEST_MATRIX=( " C0-1:P1 . . C2-3 S+:C4-5 . . . 0 A1:4-5" " C0-1 . . C2-3:P1 . . . C2 0 " " C0-1 . . C2-3:P1 . . . C4-5 0 B1:4-5" - "C0-3:P1:S+ C2-3:P1 . . . . . . 0 A1:0-1,A2:2-3" - "C0-3:P1:S+ C2-3:P1 . . C1-3 . . . 0 A1:1,A2:2-3" - "C2-3:P1:S+ C3:P1 . . C3 . . . 0 A1:,A2:3 A1:P1,A2:P1" - "C2-3:P1:S+ C3:P1 . . C3 P0 . . 0 A1:3,A2:3 A1:P1,A2:P0" - "C2-3:P1:S+ C2:P1 . . C2-4 . . . 0 A1:3-4,A2:2" - "C2-3:P1:S+ C3:P1 . . C3 . . C0-2 0 A1:,B1:0-2 A1:P1,A2:P1" - "$SETUP_A123_PARTITIONS . C2-3 . . . 0 A1:,A2:2,A3:3 A1:P1,A2:P1,A3:P1" + "C0-3:P1:S+ C2-3:P1 . . . . . . 0 A1:0-1|A2:2-3|XA2:2-3" + "C0-3:P1:S+ C2-3:P1 . . C1-3 . . . 0 A1:1|A2:2-3|XA2:2-3" + "C2-3:P1:S+ C3:P1 . . C3 . . . 0 A1:|A2:3|XA2:3 A1:P1|A2:P1" + "C2-3:P1:S+ C3:P1 . . C3 P0 . . 0 A1:3|A2:3 A1:P1|A2:P0" + "C2-3:P1:S+ C2:P1 . . C2-4 . . . 0 A1:3-4|A2:2" + "C2-3:P1:S+ C3:P1 . . C3 . . C0-2 0 A1:|B1:0-2 A1:P1|A2:P1" + "$SETUP_A123_PARTITIONS . C2-3 . . . 0 A1:|A2:2|A3:3 A1:P1|A2:P1|A3:P1" # CPU offlining cases: - " C0-1 . . C2-3 S+ C4-5 . O2=0 0 A1:0-1,B1:3" - "C0-3:P1:S+ C2-3:P1 . . O2=0 . . . 0 A1:0-1,A2:3" - "C0-3:P1:S+ C2-3:P1 . . O2=0 O2=1 . . 0 A1:0-1,A2:2-3" - "C0-3:P1:S+ C2-3:P1 . . O1=0 . . . 0 A1:0,A2:2-3" - "C0-3:P1:S+ C2-3:P1 . . O1=0 O1=1 . . 0 A1:0-1,A2:2-3" - "C2-3:P1:S+ C3:P1 . . O3=0 O3=1 . . 0 A1:2,A2:3 A1:P1,A2:P1" - "C2-3:P1:S+ C3:P2 . . O3=0 O3=1 . . 0 A1:2,A2:3 A1:P1,A2:P2" - "C2-3:P1:S+ C3:P1 . . O2=0 O2=1 . . 0 A1:2,A2:3 A1:P1,A2:P1" - "C2-3:P1:S+ C3:P2 . . O2=0 O2=1 . . 0 A1:2,A2:3 A1:P1,A2:P2" - "C2-3:P1:S+ C3:P1 . . O2=0 . . . 0 A1:,A2:3 A1:P1,A2:P1" - "C2-3:P1:S+ C3:P1 . . O3=0 . . . 0 A1:2,A2: A1:P1,A2:P1" - "C2-3:P1:S+ C3:P1 . . T:O2=0 . . . 0 A1:3,A2:3 A1:P1,A2:P-1" - "C2-3:P1:S+ C3:P1 . . . T:O3=0 . . 0 A1:2,A2:2 A1:P1,A2:P-1" - "$SETUP_A123_PARTITIONS . O1=0 . . . 0 A1:,A2:2,A3:3 A1:P1,A2:P1,A3:P1" - "$SETUP_A123_PARTITIONS . O2=0 . . . 0 A1:1,A2:,A3:3 A1:P1,A2:P1,A3:P1" - "$SETUP_A123_PARTITIONS . O3=0 . . . 0 A1:1,A2:2,A3: A1:P1,A2:P1,A3:P1" - "$SETUP_A123_PARTITIONS . T:O1=0 . . . 0 A1:2-3,A2:2-3,A3:3 A1:P1,A2:P-1,A3:P-1" - "$SETUP_A123_PARTITIONS . . T:O2=0 . . 0 A1:1,A2:3,A3:3 A1:P1,A2:P1,A3:P-1" - "$SETUP_A123_PARTITIONS . . . T:O3=0 . 0 A1:1,A2:2,A3:2 A1:P1,A2:P1,A3:P-1" - "$SETUP_A123_PARTITIONS . T:O1=0 O1=1 . . 0 A1:1,A2:2,A3:3 A1:P1,A2:P1,A3:P1" - "$SETUP_A123_PARTITIONS . . T:O2=0 O2=1 . 0 A1:1,A2:2,A3:3 A1:P1,A2:P1,A3:P1" - "$SETUP_A123_PARTITIONS . . . T:O3=0 O3=1 0 A1:1,A2:2,A3:3 A1:P1,A2:P1,A3:P1" - "$SETUP_A123_PARTITIONS . T:O1=0 O2=0 O1=1 . 0 A1:1,A2:,A3:3 A1:P1,A2:P1,A3:P1" - "$SETUP_A123_PARTITIONS . T:O1=0 O2=0 O2=1 . 0 A1:2-3,A2:2-3,A3:3 A1:P1,A2:P-1,A3:P-1" + " C0-1 . . C2-3 S+ C4-5 . O2=0 0 A1:0-1|B1:3" + "C0-3:P1:S+ C2-3:P1 . . O2=0 . . . 0 A1:0-1|A2:3" + "C0-3:P1:S+ C2-3:P1 . . O2=0 O2=1 . . 0 A1:0-1|A2:2-3" + "C0-3:P1:S+ C2-3:P1 . . O1=0 . . . 0 A1:0|A2:2-3" + "C0-3:P1:S+ C2-3:P1 . . O1=0 O1=1 . . 0 A1:0-1|A2:2-3" + "C2-3:P1:S+ C3:P1 . . O3=0 O3=1 . . 0 A1:2|A2:3 A1:P1|A2:P1" + "C2-3:P1:S+ C3:P2 . . O3=0 O3=1 . . 0 A1:2|A2:3 A1:P1|A2:P2" + "C2-3:P1:S+ C3:P1 . . O2=0 O2=1 . . 0 A1:2|A2:3 A1:P1|A2:P1" + "C2-3:P1:S+ C3:P2 . . O2=0 O2=1 . . 0 A1:2|A2:3 A1:P1|A2:P2" + "C2-3:P1:S+ C3:P1 . . O2=0 . . . 0 A1:|A2:3 A1:P1|A2:P1" + "C2-3:P1:S+ C3:P1 . . O3=0 . . . 0 A1:2|A2: A1:P1|A2:P1" + "C2-3:P1:S+ C3:P1 . . T:O2=0 . . . 0 A1:3|A2:3 A1:P1|A2:P-1" + "C2-3:P1:S+ C3:P1 . . . T:O3=0 . . 0 A1:2|A2:2 A1:P1|A2:P-1" + "$SETUP_A123_PARTITIONS . O1=0 . . . 0 A1:|A2:2|A3:3 A1:P1|A2:P1|A3:P1" + "$SETUP_A123_PARTITIONS . O2=0 . . . 0 A1:1|A2:|A3:3 A1:P1|A2:P1|A3:P1" + "$SETUP_A123_PARTITIONS . O3=0 . . . 0 A1:1|A2:2|A3: A1:P1|A2:P1|A3:P1" + "$SETUP_A123_PARTITIONS . T:O1=0 . . . 0 A1:2-3|A2:2-3|A3:3 A1:P1|A2:P-1|A3:P-1" + "$SETUP_A123_PARTITIONS . . T:O2=0 . . 0 A1:1|A2:3|A3:3 A1:P1|A2:P1|A3:P-1" + "$SETUP_A123_PARTITIONS . . . T:O3=0 . 0 A1:1|A2:2|A3:2 A1:P1|A2:P1|A3:P-1" + "$SETUP_A123_PARTITIONS . T:O1=0 O1=1 . . 0 A1:1|A2:2|A3:3 A1:P1|A2:P1|A3:P1" + "$SETUP_A123_PARTITIONS . . T:O2=0 O2=1 . 0 A1:1|A2:2|A3:3 A1:P1|A2:P1|A3:P1" + "$SETUP_A123_PARTITIONS . . . T:O3=0 O3=1 0 A1:1|A2:2|A3:3 A1:P1|A2:P1|A3:P1" + "$SETUP_A123_PARTITIONS . T:O1=0 O2=0 O1=1 . 0 A1:1|A2:|A3:3 A1:P1|A2:P1|A3:P1" + "$SETUP_A123_PARTITIONS . T:O1=0 O2=0 O2=1 . 0 A1:2-3|A2:2-3|A3:3 A1:P1|A2:P-1|A3:P-1" # old-A1 old-A2 old-A3 old-B1 new-A1 new-A2 new-A3 new-B1 fail ECPUs Pstate ISOLCPUS # ------ ------ ------ ------ ------ ------ ------ ------ ---- ----- ------ -------- # # Remote partition and cpuset.cpus.exclusive tests # - " C0-3:S+ C1-3:S+ C2-3 . X2-3 . . . 0 A1:0-3,A2:1-3,A3:2-3,XA1:2-3" - " C0-3:S+ C1-3:S+ C2-3 . X2-3 X2-3:P2 . . 0 A1:0-1,A2:2-3,A3:2-3 A1:P0,A2:P2 2-3" - " C0-3:S+ C1-3:S+ C2-3 . X2-3 X3:P2 . . 0 A1:0-2,A2:3,A3:3 A1:P0,A2:P2 3" - " C0-3:S+ C1-3:S+ C2-3 . X2-3 X2-3 X2-3:P2 . 0 A1:0-1,A2:1,A3:2-3 A1:P0,A3:P2 2-3" - " C0-3:S+ C1-3:S+ C2-3 . X2-3 X2-3 X2-3:P2:C3 . 0 A1:0-1,A2:1,A3:2-3 A1:P0,A3:P2 2-3" - " C0-3:S+ C1-3:S+ C2-3 C2-3 . . . P2 0 A1:0-3,A2:1-3,A3:2-3,B1:2-3 A1:P0,A3:P0,B1:P-2" + " C0-3:S+ C1-3:S+ C2-3 . X2-3 . . . 0 A1:0-3|A2:1-3|A3:2-3|XA1:2-3" + " C0-3:S+ C1-3:S+ C2-3 . X2-3 X2-3:P2 . . 0 A1:0-1|A2:2-3|A3:2-3 A1:P0|A2:P2 2-3" + " C0-3:S+ C1-3:S+ C2-3 . X2-3 X3:P2 . . 0 A1:0-2|A2:3|A3:3 A1:P0|A2:P2 3" + " C0-3:S+ C1-3:S+ C2-3 . X2-3 X2-3 X2-3:P2 . 0 A1:0-1|A2:1|A3:2-3 A1:P0|A3:P2 2-3" + " C0-3:S+ C1-3:S+ C2-3 . X2-3 X2-3 X2-3:P2:C3 . 0 A1:0-1|A2:1|A3:2-3 A1:P0|A3:P2 2-3" + " C0-3:S+ C1-3:S+ C2-3 C2-3 . . . P2 0 A1:0-3|A2:1-3|A3:2-3|B1:2-3 A1:P0|A3:P0|B1:P-2" " C0-3:S+ C1-3:S+ C2-3 C4-5 . . . P2 0 B1:4-5 B1:P2 4-5" - " C0-3:S+ C1-3:S+ C2-3 C4 X2-3 X2-3 X2-3:P2 P2 0 A3:2-3,B1:4 A3:P2,B1:P2 2-4" - " C0-3:S+ C1-3:S+ C2-3 C4 X2-3 X2-3 X2-3:P2:C1-3 P2 0 A3:2-3,B1:4 A3:P2,B1:P2 2-4" - " C0-3:S+ C1-3:S+ C2-3 C4 X1-3 X1-3:P2 P2 . 0 A2:1,A3:2-3 A2:P2,A3:P2 1-3" - " C0-3:S+ C1-3:S+ C2-3 C4 X2-3 X2-3 X2-3:P2 P2:C4-5 0 A3:2-3,B1:4-5 A3:P2,B1:P2 2-5" - " C4:X0-3:S+ X1-3:S+ X2-3 . . P2 . . 0 A1:4,A2:1-3,A3:1-3 A2:P2 1-3" - " C4:X0-3:S+ X1-3:S+ X2-3 . . . P2 . 0 A1:4,A2:4,A3:2-3 A3:P2 2-3" + " C0-3:S+ C1-3:S+ C2-3 C4 X2-3 X2-3 X2-3:P2 P2 0 A3:2-3|B1:4 A3:P2|B1:P2 2-4" + " C0-3:S+ C1-3:S+ C2-3 C4 X2-3 X2-3 X2-3:P2:C1-3 P2 0 A3:2-3|B1:4 A3:P2|B1:P2 2-4" + " C0-3:S+ C1-3:S+ C2-3 C4 X1-3 X1-3:P2 P2 . 0 A2:1|A3:2-3 A2:P2|A3:P2 1-3" + " C0-3:S+ C1-3:S+ C2-3 C4 X2-3 X2-3 X2-3:P2 P2:C4-5 0 A3:2-3|B1:4-5 A3:P2|B1:P2 2-5" + " C4:X0-3:S+ X1-3:S+ X2-3 . . P2 . . 0 A1:4|A2:1-3|A3:1-3 A2:P2 1-3" + " C4:X0-3:S+ X1-3:S+ X2-3 . . . P2 . 0 A1:4|A2:4|A3:2-3 A3:P2 2-3" # Nested remote/local partition tests - " C0-3:S+ C1-3:S+ C2-3 C4-5 X2-3 X2-3:P1 P2 P1 0 A1:0-1,A2:,A3:2-3,B1:4-5 \ - A1:P0,A2:P1,A3:P2,B1:P1 2-3" - " C0-3:S+ C1-3:S+ C2-3 C4 X2-3 X2-3:P1 P2 P1 0 A1:0-1,A2:,A3:2-3,B1:4 \ - A1:P0,A2:P1,A3:P2,B1:P1 2-4,2-3" - " C0-3:S+ C1-3:S+ C2-3 C4 X2-3 X2-3:P1 . P1 0 A1:0-1,A2:2-3,A3:2-3,B1:4 \ - A1:P0,A2:P1,A3:P0,B1:P1" - " C0-3:S+ C1-3:S+ C3 C4 X2-3 X2-3:P1 P2 P1 0 A1:0-1,A2:2,A3:3,B1:4 \ - A1:P0,A2:P1,A3:P2,B1:P1 2-4,3" - " C0-4:S+ C1-4:S+ C2-4 . X2-4 X2-4:P2 X4:P1 . 0 A1:0-1,A2:2-3,A3:4 \ - A1:P0,A2:P2,A3:P1 2-4,2-3" - " C0-4:S+ C1-4:S+ C2-4 . X2-4 X2-4:P2 X3-4:P1 . 0 A1:0-1,A2:2,A3:3-4 \ - A1:P0,A2:P2,A3:P1 2" + " C0-3:S+ C1-3:S+ C2-3 C4-5 X2-3 X2-3:P1 P2 P1 0 A1:0-1|A2:|A3:2-3|B1:4-5 \ + A1:P0|A2:P1|A3:P2|B1:P1 2-3" + " C0-3:S+ C1-3:S+ C2-3 C4 X2-3 X2-3:P1 P2 P1 0 A1:0-1|A2:|A3:2-3|B1:4 \ + A1:P0|A2:P1|A3:P2|B1:P1 2-4|2-3" + " C0-3:S+ C1-3:S+ C2-3 C4 X2-3 X2-3:P1 . P1 0 A1:0-1|A2:2-3|A3:2-3|B1:4 \ + A1:P0|A2:P1|A3:P0|B1:P1" + " C0-3:S+ C1-3:S+ C3 C4 X2-3 X2-3:P1 P2 P1 0 A1:0-1|A2:2|A3:3|B1:4 \ + A1:P0|A2:P1|A3:P2|B1:P1 2-4|3" + " C0-4:S+ C1-4:S+ C2-4 . X2-4 X2-4:P2 X4:P1 . 0 A1:0-1|A2:2-3|A3:4 \ + A1:P0|A2:P2|A3:P1 2-4|2-3" + " C0-4:S+ C1-4:S+ C2-4 . X2-4 X2-4:P2 X3-4:P1 . 0 A1:0-1|A2:2|A3:3-4 \ + A1:P0|A2:P2|A3:P1 2" " C0-4:X2-4:S+ C1-4:X2-4:S+:P2 C2-4:X4:P1 \ - . . X5 . . 0 A1:0-4,A2:1-4,A3:2-4 \ - A1:P0,A2:P-2,A3:P-1" + . . X5 . . 0 A1:0-4|A2:1-4|A3:2-4 \ + A1:P0|A2:P-2|A3:P-1 ." " C0-4:X2-4:S+ C1-4:X2-4:S+:P2 C2-4:X4:P1 \ - . . . X1 . 0 A1:0-1,A2:2-4,A3:2-4 \ - A1:P0,A2:P2,A3:P-1 2-4" + . . . X1 . 0 A1:0-1|A2:2-4|A3:2-4 \ + A1:P0|A2:P2|A3:P-1 2-4" # Remote partition offline tests - " C0-3:S+ C1-3:S+ C2-3 . X2-3 X2-3 X2-3:P2:O2=0 . 0 A1:0-1,A2:1,A3:3 A1:P0,A3:P2 2-3" - " C0-3:S+ C1-3:S+ C2-3 . X2-3 X2-3 X2-3:P2:O2=0 O2=1 0 A1:0-1,A2:1,A3:2-3 A1:P0,A3:P2 2-3" - " C0-3:S+ C1-3:S+ C3 . X2-3 X2-3 P2:O3=0 . 0 A1:0-2,A2:1-2,A3: A1:P0,A3:P2 3" - " C0-3:S+ C1-3:S+ C3 . X2-3 X2-3 T:P2:O3=0 . 0 A1:0-2,A2:1-2,A3:1-2 A1:P0,A3:P-2 3," + " C0-3:S+ C1-3:S+ C2-3 . X2-3 X2-3 X2-3:P2:O2=0 . 0 A1:0-1|A2:1|A3:3 A1:P0|A3:P2 2-3" + " C0-3:S+ C1-3:S+ C2-3 . X2-3 X2-3 X2-3:P2:O2=0 O2=1 0 A1:0-1|A2:1|A3:2-3 A1:P0|A3:P2 2-3" + " C0-3:S+ C1-3:S+ C3 . X2-3 X2-3 P2:O3=0 . 0 A1:0-2|A2:1-2|A3: A1:P0|A3:P2 3" + " C0-3:S+ C1-3:S+ C3 . X2-3 X2-3 T:P2:O3=0 . 0 A1:0-2|A2:1-2|A3:1-2 A1:P0|A3:P-2 3|" # An invalidated remote partition cannot self-recover from hotplug - " C0-3:S+ C1-3:S+ C2 . X2-3 X2-3 T:P2:O2=0 O2=1 0 A1:0-3,A2:1-3,A3:2 A1:P0,A3:P-2" + " C0-3:S+ C1-3:S+ C2 . X2-3 X2-3 T:P2:O2=0 O2=1 0 A1:0-3|A2:1-3|A3:2 A1:P0|A3:P-2 ." # cpus.exclusive.effective clearing test - " C0-3:S+ C1-3:S+ C2 . X2-3:X . . . 0 A1:0-3,A2:1-3,A3:2,XA1:" + " C0-3:S+ C1-3:S+ C2 . X2-3:X . . . 0 A1:0-3|A2:1-3|A3:2|XA1:" # Invalid to valid remote partition transition test - " C0-3:S+ C1-3 . . . X3:P2 . . 0 A1:0-3,A2:1-3,XA2: A2:P-2" + " C0-3:S+ C1-3 . . . X3:P2 . . 0 A1:0-3|A2:1-3|XA2: A2:P-2 ." " C0-3:S+ C1-3:X3:P2 - . . X2-3 P2 . . 0 A1:0-2,A2:3,XA2:3 A2:P2 3" + . . X2-3 P2 . . 0 A1:0-2|A2:3|XA2:3 A2:P2 3" # Invalid to valid local partition direct transition tests - " C1-3:S+:P2 X4:P2 . . . . . . 0 A1:1-3,XA1:1-3,A2:1-3:XA2: A1:P2,A2:P-2 1-3" - " C1-3:S+:P2 X4:P2 . . . X3:P2 . . 0 A1:1-2,XA1:1-3,A2:3:XA2:3 A1:P2,A2:P2 1-3" - " C0-3:P2 . . C4-6 C0-4 . . . 0 A1:0-4,B1:4-6 A1:P-2,B1:P0" - " C0-3:P2 . . C4-6 C0-4:C0-3 . . . 0 A1:0-3,B1:4-6 A1:P2,B1:P0 0-3" - " C0-3:P2 . . C3-5:C4-5 . . . . 0 A1:0-3,B1:4-5 A1:P2,B1:P0 0-3" + " C1-3:S+:P2 X4:P2 . . . . . . 0 A1:1-3|XA1:1-3|A2:1-3:XA2: A1:P2|A2:P-2 1-3" + " C1-3:S+:P2 X4:P2 . . . X3:P2 . . 0 A1:1-2|XA1:1-3|A2:3:XA2:3 A1:P2|A2:P2 1-3" + " C0-3:P2 . . C4-6 C0-4 . . . 0 A1:0-4|B1:4-6 A1:P-2|B1:P0" + " C0-3:P2 . . C4-6 C0-4:C0-3 . . . 0 A1:0-3|B1:4-6 A1:P2|B1:P0 0-3" # Local partition invalidation tests " C0-3:X1-3:S+:P2 C1-3:X2-3:S+:P2 C2-3:X3:P2 \ - . . . . . 0 A1:1,A2:2,A3:3 A1:P2,A2:P2,A3:P2 1-3" + . . . . . 0 A1:1|A2:2|A3:3 A1:P2|A2:P2|A3:P2 1-3" " C0-3:X1-3:S+:P2 C1-3:X2-3:S+:P2 C2-3:X3:P2 \ - . . X4 . . 0 A1:1-3,A2:1-3,A3:2-3,XA2:,XA3: A1:P2,A2:P-2,A3:P-2 1-3" + . . X4 . . 0 A1:1-3|A2:1-3|A3:2-3|XA2:|XA3: A1:P2|A2:P-2|A3:P-2 1-3" " C0-3:X1-3:S+:P2 C1-3:X2-3:S+:P2 C2-3:X3:P2 \ - . . C4:X . . 0 A1:1-3,A2:1-3,A3:2-3,XA2:,XA3: A1:P2,A2:P-2,A3:P-2 1-3" + . . C4:X . . 0 A1:1-3|A2:1-3|A3:2-3|XA2:|XA3: A1:P2|A2:P-2|A3:P-2 1-3" # Local partition CPU change tests - " C0-5:S+:P2 C4-5:S+:P1 . . . C3-5 . . 0 A1:0-2,A2:3-5 A1:P2,A2:P1 0-2" - " C0-5:S+:P2 C4-5:S+:P1 . . C1-5 . . . 0 A1:1-3,A2:4-5 A1:P2,A2:P1 1-3" + " C0-5:S+:P2 C4-5:S+:P1 . . . C3-5 . . 0 A1:0-2|A2:3-5 A1:P2|A2:P1 0-2" + " C0-5:S+:P2 C4-5:S+:P1 . . C1-5 . . . 0 A1:1-3|A2:4-5 A1:P2|A2:P1 1-3" # cpus_allowed/exclusive_cpus update tests " C0-3:X2-3:S+ C1-3:X2-3:S+ C2-3:X2-3 \ - . X:C4 . P2 . 0 A1:4,A2:4,XA2:,XA3:,A3:4 \ - A1:P0,A3:P-2" + . X:C4 . P2 . 0 A1:4|A2:4|XA2:|XA3:|A3:4 \ + A1:P0|A3:P-2 ." " C0-3:X2-3:S+ C1-3:X2-3:S+ C2-3:X2-3 \ - . X1 . P2 . 0 A1:0-3,A2:1-3,XA1:1,XA2:,XA3:,A3:2-3 \ - A1:P0,A3:P-2" + . X1 . P2 . 0 A1:0-3|A2:1-3|XA1:1|XA2:|XA3:|A3:2-3 \ + A1:P0|A3:P-2 ." " C0-3:X2-3:S+ C1-3:X2-3:S+ C2-3:X2-3 \ - . . X3 P2 . 0 A1:0-2,A2:1-2,XA2:3,XA3:3,A3:3 \ - A1:P0,A3:P2 3" + . . X3 P2 . 0 A1:0-2|A2:1-2|XA2:3|XA3:3|A3:3 \ + A1:P0|A3:P2 3" " C0-3:X2-3:S+ C1-3:X2-3:S+ C2-3:X2-3:P2 \ - . . X3 . . 0 A1:0-3,A2:1-3,XA2:3,XA3:3,A3:2-3 \ - A1:P0,A3:P-2" + . . X3 . . 0 A1:0-2|A2:1-2|XA2:3|XA3:3|A3:3|XA3:3 \ + A1:P0|A3:P2 3" " C0-3:X2-3:S+ C1-3:X2-3:S+ C2-3:X2-3:P2 \ - . X4 . . . 0 A1:0-3,A2:1-3,A3:2-3,XA1:4,XA2:,XA3 \ - A1:P0,A3:P-2" + . X4 . . . 0 A1:0-3|A2:1-3|A3:2-3|XA1:4|XA2:|XA3 \ + A1:P0|A3:P-2" # old-A1 old-A2 old-A3 old-B1 new-A1 new-A2 new-A3 new-B1 fail ECPUs Pstate ISOLCPUS # ------ ------ ------ ------ ------ ------ ------ ------ ---- ----- ------ -------- @@ -339,68 +356,127 @@ TEST_MATRIX=( # # Adding CPUs to partition root that are not in parent's # cpuset.cpus is allowed, but those extra CPUs are ignored. - "C2-3:P1:S+ C3:P1 . . . C2-4 . . 0 A1:,A2:2-3 A1:P1,A2:P1" + "C2-3:P1:S+ C3:P1 . . . C2-4 . . 0 A1:|A2:2-3 A1:P1|A2:P1" # Taking away all CPUs from parent or itself if there are tasks # will make the partition invalid. - "C2-3:P1:S+ C3:P1 . . T C2-3 . . 0 A1:2-3,A2:2-3 A1:P1,A2:P-1" - " C3:P1:S+ C3 . . T P1 . . 0 A1:3,A2:3 A1:P1,A2:P-1" - "$SETUP_A123_PARTITIONS . T:C2-3 . . . 0 A1:2-3,A2:2-3,A3:3 A1:P1,A2:P-1,A3:P-1" - "$SETUP_A123_PARTITIONS . T:C2-3:C1-3 . . . 0 A1:1,A2:2,A3:3 A1:P1,A2:P1,A3:P1" + "C2-3:P1:S+ C3:P1 . . T C2-3 . . 0 A1:2-3|A2:2-3 A1:P1|A2:P-1" + " C3:P1:S+ C3 . . T P1 . . 0 A1:3|A2:3 A1:P1|A2:P-1" + "$SETUP_A123_PARTITIONS . T:C2-3 . . . 0 A1:2-3|A2:2-3|A3:3 A1:P1|A2:P-1|A3:P-1" + "$SETUP_A123_PARTITIONS . T:C2-3:C1-3 . . . 0 A1:1|A2:2|A3:3 A1:P1|A2:P1|A3:P1" # Changing a partition root to member makes child partitions invalid - "C2-3:P1:S+ C3:P1 . . P0 . . . 0 A1:2-3,A2:3 A1:P0,A2:P-1" - "$SETUP_A123_PARTITIONS . C2-3 P0 . . 0 A1:2-3,A2:2-3,A3:3 A1:P1,A2:P0,A3:P-1" + "C2-3:P1:S+ C3:P1 . . P0 . . . 0 A1:2-3|A2:3 A1:P0|A2:P-1" + "$SETUP_A123_PARTITIONS . C2-3 P0 . . 0 A1:2-3|A2:2-3|A3:3 A1:P1|A2:P0|A3:P-1" # cpuset.cpus can contains cpus not in parent's cpuset.cpus as long # as they overlap. - "C2-3:P1:S+ . . . . C3-4:P1 . . 0 A1:2,A2:3 A1:P1,A2:P1" + "C2-3:P1:S+ . . . . C3-4:P1 . . 0 A1:2|A2:3 A1:P1|A2:P1" # Deletion of CPUs distributed to child cgroup is allowed. - "C0-1:P1:S+ C1 . C2-3 C4-5 . . . 0 A1:4-5,A2:4-5" + "C0-1:P1:S+ C1 . C2-3 C4-5 . . . 0 A1:4-5|A2:4-5" # To become a valid partition root, cpuset.cpus must overlap parent's # cpuset.cpus. - " C0-1:P1 . . C2-3 S+ C4-5:P1 . . 0 A1:0-1,A2:0-1 A1:P1,A2:P-1" + " C0-1:P1 . . C2-3 S+ C4-5:P1 . . 0 A1:0-1|A2:0-1 A1:P1|A2:P-1" # Enabling partition with child cpusets is allowed - " C0-1:S+ C1 . C2-3 P1 . . . 0 A1:0-1,A2:1 A1:P1" + " C0-1:S+ C1 . C2-3 P1 . . . 0 A1:0-1|A2:1 A1:P1" - # A partition root with non-partition root parent is invalid, but it + # A partition root with non-partition root parent is invalid| but it # can be made valid if its parent becomes a partition root too. - " C0-1:S+ C1 . C2-3 . P2 . . 0 A1:0-1,A2:1 A1:P0,A2:P-2" - " C0-1:S+ C1:P2 . C2-3 P1 . . . 0 A1:0,A2:1 A1:P1,A2:P2" + " C0-1:S+ C1 . C2-3 . P2 . . 0 A1:0-1|A2:1 A1:P0|A2:P-2" + " C0-1:S+ C1:P2 . C2-3 P1 . . . 0 A1:0|A2:1 A1:P1|A2:P2 0-1|1" # A non-exclusive cpuset.cpus change will invalidate partition and its siblings - " C0-1:P1 . . C2-3 C0-2 . . . 0 A1:0-2,B1:2-3 A1:P-1,B1:P0" - " C0-1:P1 . . P1:C2-3 C0-2 . . . 0 A1:0-2,B1:2-3 A1:P-1,B1:P-1" - " C0-1 . . P1:C2-3 C0-2 . . . 0 A1:0-2,B1:2-3 A1:P0,B1:P-1" + " C0-1:P1 . . C2-3 C0-2 . . . 0 A1:0-2|B1:2-3 A1:P-1|B1:P0" + " C0-1:P1 . . P1:C2-3 C0-2 . . . 0 A1:0-2|B1:2-3 A1:P-1|B1:P-1" + " C0-1 . . P1:C2-3 C0-2 . . . 0 A1:0-2|B1:2-3 A1:P0|B1:P-1" # cpuset.cpus can overlap with sibling cpuset.cpus.exclusive but not subsumed by it - " C0-3 . . C4-5 X5 . . . 0 A1:0-3,B1:4-5" + " C0-3 . . C4-5 X5 . . . 0 A1:0-3|B1:4-5" # Child partition root that try to take all CPUs from parent partition # with tasks will remain invalid. - " C1-4:P1:S+ P1 . . . . . . 0 A1:1-4,A2:1-4 A1:P1,A2:P-1" - " C1-4:P1:S+ P1 . . . C1-4 . . 0 A1,A2:1-4 A1:P1,A2:P1" - " C1-4:P1:S+ P1 . . T C1-4 . . 0 A1:1-4,A2:1-4 A1:P1,A2:P-1" + " C1-4:P1:S+ P1 . . . . . . 0 A1:1-4|A2:1-4 A1:P1|A2:P-1" + " C1-4:P1:S+ P1 . . . C1-4 . . 0 A1|A2:1-4 A1:P1|A2:P1" + " C1-4:P1:S+ P1 . . T C1-4 . . 0 A1:1-4|A2:1-4 A1:P1|A2:P-1" # Clearing of cpuset.cpus with a preset cpuset.cpus.exclusive shouldn't # affect cpuset.cpus.exclusive.effective. - " C1-4:X3:S+ C1:X3 . . . C . . 0 A2:1-4,XA2:3" + " C1-4:X3:S+ C1:X3 . . . C . . 0 A2:1-4|XA2:3" + + # cpuset.cpus can contain CPUs that overlap a sibling cpuset with cpus.exclusive + # but creating a local partition out of it is not allowed. Similarly and change + # in cpuset.cpus of a local partition that overlaps sibling exclusive CPUs will + # invalidate it. + " CX1-4:S+ CX2-4:P2 . C5-6 . . . P1 0 A1:1|A2:2-4|B1:5-6|XB1:5-6 \ + A1:P0|A2:P2:B1:P1 2-4" + " CX1-4:S+ CX2-4:P2 . C3-6 . . . P1 0 A1:1|A2:2-4|B1:5-6 \ + A1:P0|A2:P2:B1:P-1 2-4" + " CX1-4:S+ CX2-4:P2 . C5-6 . . . P1:C3-6 0 A1:1|A2:2-4|B1:5-6 \ + A1:P0|A2:P2:B1:P-1 2-4" # old-A1 old-A2 old-A3 old-B1 new-A1 new-A2 new-A3 new-B1 fail ECPUs Pstate ISOLCPUS # ------ ------ ------ ------ ------ ------ ------ ------ ---- ----- ------ -------- # Failure cases: # A task cannot be added to a partition with no cpu - "C2-3:P1:S+ C3:P1 . . O2=0:T . . . 1 A1:,A2:3 A1:P1,A2:P1" + "C2-3:P1:S+ C3:P1 . . O2=0:T . . . 1 A1:|A2:3 A1:P1|A2:P1" # Changes to cpuset.cpus.exclusive that violate exclusivity rule is rejected - " C0-3 . . C4-5 X0-3 . . X3-5 1 A1:0-3,B1:4-5" + " C0-3 . . C4-5 X0-3 . . X3-5 1 A1:0-3|B1:4-5" # cpuset.cpus cannot be a subset of sibling cpuset.cpus.exclusive - " C0-3 . . C4-5 X3-5 . . . 1 A1:0-3,B1:4-5" + " C0-3 . . C4-5 X3-5 . . . 1 A1:0-3|B1:4-5" +) + +# +# Cpuset controller remote partition test matrix. +# +# Cgroup test hierarchy +# +# root +# | +# rtest (cpuset.cpus.exclusive=1-7) +# | +# +------+------+ +# | | +# p1 p2 +# +--+--+ +--+--+ +# | | | | +# c11 c12 c21 c22 +# +# REMOTE_TEST_MATRIX uses the same notational convention as TEST_MATRIX. +# Only CPUs 1-7 should be used. +# +REMOTE_TEST_MATRIX=( + # old-p1 old-p2 old-c11 old-c12 old-c21 old-c22 + # new-p1 new-p2 new-c11 new-c12 new-c21 new-c22 ECPUs Pstate ISOLCPUS + # ------ ------ ------- ------- ------- ------- ----- ------ -------- + " X1-3:S+ X4-6:S+ X1-2 X3 X4-5 X6 \ + . . P2 P2 P2 P2 c11:1-2|c12:3|c21:4-5|c22:6 \ + c11:P2|c12:P2|c21:P2|c22:P2 1-6" + " CX1-4:S+ . X1-2:P2 C3 . . \ + . . . C3-4 . . p1:3-4|c11:1-2|c12:3-4 \ + p1:P0|c11:P2|c12:P0 1-2" + " CX1-4:S+ . X1-2:P2 . . . \ + X2-4 . . . . . p1:1,3-4|c11:2 \ + p1:P0|c11:P2 2" + " CX1-5:S+ . X1-2:P2 X3-5:P1 . . \ + X2-4 . . . . . p1:1,5|c11:2|c12:3-4 \ + p1:P0|c11:P2|c12:P1 2" + " CX1-4:S+ . X1-2:P2 X3-4:P1 . . \ + . . X2 . . . p1:1|c11:2|c12:3-4 \ + p1:P0|c11:P2|c12:P1 2" + # p1 as member, will get its effective CPUs from its parent rtest + " CX1-4:S+ . X1-2:P2 X3-4:P1 . . \ + . . X1 CX2-4 . . p1:5-7|c11:1|c12:2-4 \ + p1:P0|c11:P2|c12:P1 1" + " CX1-4:S+ X5-6:P1:S+ . . . . \ + . . X1-2:P2 X4-5:P1 . X1-7:P2 p1:3|c11:1-2|c12:4:c22:5-6 \ + p1:P0|p2:P1|c11:P2|c12:P1|c22:P2 \ + 1-2,4-6|1-2,5-6" ) # @@ -453,25 +529,26 @@ set_ctrl_state() PFILE=$CGRP/cpuset.cpus.partition CFILE=$CGRP/cpuset.cpus XFILE=$CGRP/cpuset.cpus.exclusive - S=$(expr substr $CMD 1 1) - if [[ $S = S ]] - then - PREFIX=${CMD#?} + case $CMD in + S*) PREFIX=${CMD#?} COMM="echo ${PREFIX}${CTRL} > $SFILE" eval $COMM $REDIRECT - elif [[ $S = X ]] - then + ;; + X*) CPUS=${CMD#?} COMM="echo $CPUS > $XFILE" eval $COMM $REDIRECT - elif [[ $S = C ]] - then - CPUS=${CMD#?} + ;; + CX*) + CPUS=${CMD#??} + COMM="echo $CPUS > $CFILE; echo $CPUS > $XFILE" + eval $COMM $REDIRECT + ;; + C*) CPUS=${CMD#?} COMM="echo $CPUS > $CFILE" eval $COMM $REDIRECT - elif [[ $S = P ]] - then - VAL=${CMD#?} + ;; + P*) VAL=${CMD#?} case $VAL in 0) VAL=member ;; @@ -486,15 +563,17 @@ set_ctrl_state() esac COMM="echo $VAL > $PFILE" eval $COMM $REDIRECT - elif [[ $S = O ]] - then - VAL=${CMD#?} + ;; + O*) VAL=${CMD#?} write_cpu_online $VAL - elif [[ $S = T ]] - then - COMM="echo 0 > $TFILE" + ;; + T*) COMM="echo 0 > $TFILE" eval $COMM $REDIRECT - fi + ;; + *) echo "Unknown command: $CMD" + exit 1 + ;; + esac RET=$? [[ $RET -ne 0 ]] && { [[ -n "$SHOWERR" ]] && { @@ -532,21 +611,18 @@ online_cpus() } # -# Return 1 if the list of effective cpus isn't the same as the initial list. +# Remove all the test cgroup directories # reset_cgroup_states() { echo 0 > $CGROUP2/cgroup.procs online_cpus - rmdir A1/A2/A3 A1/A2 A1 B1 > /dev/null 2>&1 - pause 0.02 - set_ctrl_state . R- - pause 0.01 + rmdir $RESET_LIST > /dev/null 2>&1 } dump_states() { - for DIR in . A1 A1/A2 A1/A2/A3 B1 + for DIR in $CGROUP_LIST do CPUS=$DIR/cpuset.cpus ECPUS=$DIR/cpuset.cpus.effective @@ -566,17 +642,33 @@ dump_states() } # +# Set the actual cgroup directory into $CGRP_DIR +# $1 - cgroup name +# +set_cgroup_dir() +{ + CGRP_DIR=$1 + [[ $CGRP_DIR = A2 ]] && CGRP_DIR=A1/A2 + [[ $CGRP_DIR = A3 ]] && CGRP_DIR=A1/A2/A3 + [[ $CGRP_DIR = c11 ]] && CGRP_DIR=p1/c11 + [[ $CGRP_DIR = c12 ]] && CGRP_DIR=p1/c12 + [[ $CGRP_DIR = c21 ]] && CGRP_DIR=p2/c21 + [[ $CGRP_DIR = c22 ]] && CGRP_DIR=p2/c22 +} + +# # Check effective cpus -# $1 - check string, format: <cgroup>:<cpu-list>[,<cgroup>:<cpu-list>]* +# $1 - check string, format: <cgroup>:<cpu-list>[|<cgroup>:<cpu-list>]* # check_effective_cpus() { CHK_STR=$1 - for CHK in $(echo $CHK_STR | sed -e "s/,/ /g") + for CHK in $(echo $CHK_STR | sed -e "s/|/ /g") do set -- $(echo $CHK | sed -e "s/:/ /g") CGRP=$1 - CPUS=$2 + EXPECTED_CPUS=$2 + ACTUAL_CPUS= if [[ $CGRP = X* ]] then CGRP=${CGRP#X} @@ -584,41 +676,39 @@ check_effective_cpus() else FILE=cpuset.cpus.effective fi - [[ $CGRP = A2 ]] && CGRP=A1/A2 - [[ $CGRP = A3 ]] && CGRP=A1/A2/A3 - [[ -e $CGRP/$FILE ]] || return 1 - [[ $CPUS = $(cat $CGRP/$FILE) ]] || return 1 + set_cgroup_dir $CGRP + [[ -e $CGRP_DIR/$FILE ]] || return 1 + ACTUAL_CPUS=$(cat $CGRP_DIR/$FILE) + [[ $EXPECTED_CPUS = $ACTUAL_CPUS ]] || return 1 done } # # Check cgroup states -# $1 - check string, format: <cgroup>:<state>[,<cgroup>:<state>]* +# $1 - check string, format: <cgroup>:<state>[|<cgroup>:<state>]* # check_cgroup_states() { CHK_STR=$1 - for CHK in $(echo $CHK_STR | sed -e "s/,/ /g") + for CHK in $(echo $CHK_STR | sed -e "s/|/ /g") do set -- $(echo $CHK | sed -e "s/:/ /g") CGRP=$1 - CGRP_DIR=$CGRP - STATE=$2 + EXPECTED_STATE=$2 FILE= - EVAL=$(expr substr $STATE 2 2) - [[ $CGRP = A2 ]] && CGRP_DIR=A1/A2 - [[ $CGRP = A3 ]] && CGRP_DIR=A1/A2/A3 + EVAL=$(expr substr $EXPECTED_STATE 2 2) - case $STATE in + set_cgroup_dir $CGRP + case $EXPECTED_STATE in P*) FILE=$CGRP_DIR/cpuset.cpus.partition ;; - *) echo "Unknown state: $STATE!" + *) echo "Unknown state: $EXPECTED_STATE!" exit 1 ;; esac - VAL=$(cat $FILE) + ACTUAL_STATE=$(cat $FILE) - case "$VAL" in + case "$ACTUAL_STATE" in member) VAL=0 ;; root) VAL=1 @@ -642,7 +732,7 @@ check_cgroup_states() [[ $VAL -eq 1 && $VERBOSE -gt 0 ]] && { DOMS=$(cat $CGRP_DIR/cpuset.cpus.effective) [[ -n "$DOMS" ]] && - echo " [$CGRP] sched-domain: $DOMS" > $CONSOLE + echo " [$CGRP_DIR] sched-domain: $DOMS" > $CONSOLE } done return 0 @@ -665,22 +755,22 @@ check_cgroup_states() # check_isolcpus() { - EXPECT_VAL=$1 - ISOLCPUS= + EXPECTED_ISOLCPUS=$1 + ISCPUS=${CGROUP2}/cpuset.cpus.isolated + ISOLCPUS=$(cat $ISCPUS) LASTISOLCPU= SCHED_DOMAINS=/sys/kernel/debug/sched/domains - ISCPUS=${CGROUP2}/cpuset.cpus.isolated - if [[ $EXPECT_VAL = . ]] + if [[ $EXPECTED_ISOLCPUS = . ]] then - EXPECT_VAL= - EXPECT_VAL2= - elif [[ $(expr $EXPECT_VAL : ".*,.*") > 0 ]] + EXPECTED_ISOLCPUS= + EXPECTED_SDOMAIN= + elif [[ $(expr $EXPECTED_ISOLCPUS : ".*|.*") > 0 ]] then - set -- $(echo $EXPECT_VAL | sed -e "s/,/ /g") - EXPECT_VAL=$1 - EXPECT_VAL2=$2 + set -- $(echo $EXPECTED_ISOLCPUS | sed -e "s/|/ /g") + EXPECTED_ISOLCPUS=$2 + EXPECTED_SDOMAIN=$1 else - EXPECT_VAL2=$EXPECT_VAL + EXPECTED_SDOMAIN=$EXPECTED_ISOLCPUS fi # @@ -689,20 +779,21 @@ check_isolcpus() # to make appending those CPUs easier. # [[ -n "$BOOT_ISOLCPUS" ]] && { - EXPECT_VAL=${EXPECT_VAL:+${EXPECT_VAL},}${BOOT_ISOLCPUS} - EXPECT_VAL2=${EXPECT_VAL2:+${EXPECT_VAL2},}${BOOT_ISOLCPUS} + EXPECTED_ISOLCPUS=${EXPECTED_ISOLCPUS:+${EXPECTED_ISOLCPUS},}${BOOT_ISOLCPUS} + EXPECTED_SDOMAIN=${EXPECTED_SDOMAIN:+${EXPECTED_SDOMAIN},}${BOOT_ISOLCPUS} } # # Check cpuset.cpus.isolated cpumask # - [[ "$EXPECT_VAL2" != "$ISOLCPUS" ]] && { + [[ "$EXPECTED_ISOLCPUS" != "$ISOLCPUS" ]] && { # Take a 50ms pause and try again pause 0.05 ISOLCPUS=$(cat $ISCPUS) } - [[ "$EXPECT_VAL2" != "$ISOLCPUS" ]] && return 1 + [[ "$EXPECTED_ISOLCPUS" != "$ISOLCPUS" ]] && return 1 ISOLCPUS= + EXPECTED_ISOLCPUS=$EXPECTED_SDOMAIN # # Use the sched domain in debugfs to check isolated CPUs, if available @@ -736,7 +827,7 @@ check_isolcpus() done [[ "$ISOLCPUS" = *- ]] && ISOLCPUS=${ISOLCPUS}$LASTISOLCPU - [[ "$EXPECT_VAL" = "$ISOLCPUS" ]] + [[ "$EXPECTED_SDOMAIN" = "$ISOLCPUS" ]] } test_fail() @@ -774,6 +865,63 @@ null_isolcpus_check() } # +# Check state transition test result +# $1 - Test number +# $2 - Expected effective CPU values +# $3 - Expected partition states +# $4 - Expected isolated CPUs +# +check_test_results() +{ + _NR=$1 + _ECPUS="$2" + _PSTATES="$3" + _ISOLCPUS="$4" + + [[ -n "$_ECPUS" && "$_ECPUS" != . ]] && { + check_effective_cpus $_ECPUS + [[ $? -ne 0 ]] && test_fail $_NR "effective CPU" \ + "Cgroup $CGRP: expected $EXPECTED_CPUS, got $ACTUAL_CPUS" + } + + [[ -n "$_PSTATES" && "$_PSTATES" != . ]] && { + check_cgroup_states $_PSTATES + [[ $? -ne 0 ]] && test_fail $_NR states \ + "Cgroup $CGRP: expected $EXPECTED_STATE, got $ACTUAL_STATE" + } + + # Compare the expected isolated CPUs with the actual ones, + # if available + [[ -n "$_ISOLCPUS" ]] && { + check_isolcpus $_ISOLCPUS + [[ $? -ne 0 ]] && { + [[ -n "$BOOT_ISOLCPUS" ]] && _ISOLCPUS=${_ISOLCPUS},${BOOT_ISOLCPUS} + test_fail $_NR "isolated CPU" \ + "Expect $_ISOLCPUS, get $ISOLCPUS instead" + } + } + reset_cgroup_states + # + # Check to see if effective cpu list changes + # + _NEWLIST=$(cat $CGROUP2/cpuset.cpus.effective) + RETRY=0 + while [[ $_NEWLIST != $CPULIST && $RETRY -lt 8 ]] + do + # Wait a bit longer & recheck a few times + pause 0.02 + ((RETRY++)) + _NEWLIST=$(cat $CGROUP2/cpuset.cpus.effective) + done + [[ $_NEWLIST != $CPULIST ]] && { + echo "Effective cpus changed to $_NEWLIST after test $_NR!" + exit 1 + } + null_isolcpus_check + [[ $VERBOSE -gt 0 ]] && echo "Test $I done." +} + +# # Run cpuset state transition test # $1 - test matrix name # @@ -785,6 +933,8 @@ run_state_test() { TEST=$1 CONTROLLER=cpuset + CGROUP_LIST=". A1 A1/A2 A1/A2/A3 B1" + RESET_LIST="A1/A2/A3 A1/A2 A1 B1" I=0 eval CNT="\${#$TEST[@]}" @@ -812,10 +962,11 @@ run_state_test() STATES=${11} ICPUS=${12} - set_ctrl_state_noerr B1 $OLD_B1 set_ctrl_state_noerr A1 $OLD_A1 set_ctrl_state_noerr A1/A2 $OLD_A2 set_ctrl_state_noerr A1/A2/A3 $OLD_A3 + set_ctrl_state_noerr B1 $OLD_B1 + RETVAL=0 set_ctrl_state A1 $NEW_A1; ((RETVAL += $?)) set_ctrl_state A1/A2 $NEW_A2; ((RETVAL += $?)) @@ -824,47 +975,79 @@ run_state_test() [[ $RETVAL -ne $RESULT ]] && test_fail $I result - [[ -n "$ECPUS" && "$ECPUS" != . ]] && { - check_effective_cpus $ECPUS - [[ $? -ne 0 ]] && test_fail $I "effective CPU" - } + check_test_results $I "$ECPUS" "$STATES" "$ICPUS" + ((I++)) + done + echo "All $I tests of $TEST PASSED." +} - [[ -n "$STATES" && "$STATES" != . ]] && { - check_cgroup_states $STATES - [[ $? -ne 0 ]] && test_fail $I states - } +# +# Run cpuset remote partition state transition test +# $1 - test matrix name +# +run_remote_state_test() +{ + TEST=$1 + CONTROLLER=cpuset + [[ -d rtest ]] || mkdir rtest + cd rtest + echo +cpuset > cgroup.subtree_control + echo "1-7" > cpuset.cpus + echo "1-7" > cpuset.cpus.exclusive + CGROUP_LIST=".. . p1 p2 p1/c11 p1/c12 p2/c21 p2/c22" + RESET_LIST="p1/c11 p1/c12 p2/c21 p2/c22 p1 p2" + I=0 + eval CNT="\${#$TEST[@]}" - # Compare the expected isolated CPUs with the actual ones, - # if available - [[ -n "$ICPUS" ]] && { - check_isolcpus $ICPUS - [[ $? -ne 0 ]] && { - [[ -n "$BOOT_ISOLCPUS" ]] && ICPUS=${ICPUS},${BOOT_ISOLCPUS} - test_fail $I "isolated CPU" \ - "Expect $ICPUS, get $ISOLCPUS instead" - } - } - reset_cgroup_states - # - # Check to see if effective cpu list changes - # - NEWLIST=$(cat cpuset.cpus.effective) - RETRY=0 - while [[ $NEWLIST != $CPULIST && $RETRY -lt 8 ]] - do - # Wait a bit longer & recheck a few times - pause 0.02 - ((RETRY++)) - NEWLIST=$(cat cpuset.cpus.effective) - done - [[ $NEWLIST != $CPULIST ]] && { - echo "Effective cpus changed to $NEWLIST after test $I!" - exit 1 + reset_cgroup_states + console_msg "Running remote partition state transition test ..." + + while [[ $I -lt $CNT ]] + do + echo "Running test $I ..." > $CONSOLE + [[ $VERBOSE -gt 1 ]] && { + echo "" + eval echo \${$TEST[$I]} } - null_isolcpus_check - [[ $VERBOSE -gt 0 ]] && echo "Test $I done." + eval set -- "\${$TEST[$I]}" + OLD_p1=$1 + OLD_p2=$2 + OLD_c11=$3 + OLD_c12=$4 + OLD_c21=$5 + OLD_c22=$6 + NEW_p1=$7 + NEW_p2=$8 + NEW_c11=$9 + NEW_c12=${10} + NEW_c21=${11} + NEW_c22=${12} + ECPUS=${13} + STATES=${14} + ICPUS=${15} + + set_ctrl_state_noerr p1 $OLD_p1 + set_ctrl_state_noerr p2 $OLD_p2 + set_ctrl_state_noerr p1/c11 $OLD_c11 + set_ctrl_state_noerr p1/c12 $OLD_c12 + set_ctrl_state_noerr p2/c21 $OLD_c21 + set_ctrl_state_noerr p2/c22 $OLD_c22 + + RETVAL=0 + set_ctrl_state p1 $NEW_p1 ; ((RETVAL += $?)) + set_ctrl_state p2 $NEW_p2 ; ((RETVAL += $?)) + set_ctrl_state p1/c11 $NEW_c11; ((RETVAL += $?)) + set_ctrl_state p1/c12 $NEW_c12; ((RETVAL += $?)) + set_ctrl_state p2/c21 $NEW_c21; ((RETVAL += $?)) + set_ctrl_state p2/c22 $NEW_c22; ((RETVAL += $?)) + + [[ $RETVAL -ne 0 ]] && test_fail $I result + + check_test_results $I "$ECPUS" "$STATES" "$ICPUS" ((I++)) done + cd .. + rmdir rtest echo "All $I tests of $TEST PASSED." } @@ -932,6 +1115,7 @@ test_isolated() echo $$ > $CGROUP2/cgroup.procs [[ -d A1 ]] && rmdir A1 null_isolcpus_check + pause 0.05 } # @@ -997,10 +1181,13 @@ test_inotify() else echo "Inotify test PASSED" fi + echo member > cpuset.cpus.partition + echo "" > cpuset.cpus } trap cleanup 0 2 3 6 run_state_test TEST_MATRIX +run_remote_state_test REMOTE_TEST_MATRIX test_isolated test_inotify echo "All tests PASSED." diff --git a/tools/testing/selftests/drivers/net/hds.py b/tools/testing/selftests/drivers/net/hds.py index 8b7f6acad15f..7c90a040ce45 100755 --- a/tools/testing/selftests/drivers/net/hds.py +++ b/tools/testing/selftests/drivers/net/hds.py @@ -6,7 +6,7 @@ import os from lib.py import ksft_run, ksft_exit, ksft_eq, ksft_raises, KsftSkipEx from lib.py import CmdExitFailure, EthtoolFamily, NlError from lib.py import NetDrvEnv -from lib.py import defer, ethtool, ip +from lib.py import defer, ethtool, ip, random def _get_hds_mode(cfg, netnl) -> str: @@ -109,6 +109,36 @@ def set_hds_thresh_zero(cfg, netnl) -> None: ksft_eq(0, rings['hds-thresh']) +def set_hds_thresh_random(cfg, netnl) -> None: + try: + rings = netnl.rings_get({'header': {'dev-index': cfg.ifindex}}) + except NlError as e: + raise KsftSkipEx('ring-get not supported by device') + if 'hds-thresh' not in rings: + raise KsftSkipEx('hds-thresh not supported by device') + if 'hds-thresh-max' not in rings: + raise KsftSkipEx('hds-thresh-max not defined by device') + + if rings['hds-thresh-max'] < 2: + raise KsftSkipEx('hds-thresh-max is too small') + elif rings['hds-thresh-max'] == 2: + hds_thresh = 1 + else: + while True: + hds_thresh = random.randint(1, rings['hds-thresh-max'] - 1) + if hds_thresh != rings['hds-thresh']: + break + + try: + netnl.rings_set({'header': {'dev-index': cfg.ifindex}, 'hds-thresh': hds_thresh}) + except NlError as e: + if e.error == errno.EINVAL: + raise KsftSkipEx("hds-thresh-set not supported by the device") + elif e.error == errno.EOPNOTSUPP: + raise KsftSkipEx("ring-set not supported by the device") + rings = netnl.rings_get({'header': {'dev-index': cfg.ifindex}}) + ksft_eq(hds_thresh, rings['hds-thresh']) + def set_hds_thresh_max(cfg, netnl) -> None: try: rings = netnl.rings_get({'header': {'dev-index': cfg.ifindex}}) @@ -243,6 +273,7 @@ def main() -> None: get_hds_thresh, set_hds_disable, set_hds_enable, + set_hds_thresh_random, set_hds_thresh_zero, set_hds_thresh_max, set_hds_thresh_gt, diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-multi-filter.tc b/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-multi-filter.tc new file mode 100644 index 000000000000..b6d6a312ead5 --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-multi-filter.tc @@ -0,0 +1,177 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: ftrace - function graph filters +# requires: set_ftrace_filter function_graph:tracer + +# Make sure that function graph filtering works + +INSTANCE1="instances/test1_$$" +INSTANCE2="instances/test2_$$" + +WD=`pwd` + +do_reset() { + cd $WD + if [ -d $INSTANCE1 ]; then + echo nop > $INSTANCE1/current_tracer + rmdir $INSTANCE1 + fi + if [ -d $INSTANCE2 ]; then + echo nop > $INSTANCE2/current_tracer + rmdir $INSTANCE2 + fi +} + +mkdir $INSTANCE1 +if ! grep -q function_graph $INSTANCE1/available_tracers; then + echo "function_graph not allowed with instances" + rmdir $INSTANCE1 + exit_unsupported +fi + +mkdir $INSTANCE2 + +fail() { # msg + do_reset + echo $1 + exit_fail +} + +disable_tracing +clear_trace + +function_count() { + search=$1 + vsearch=$2 + + if [ -z "$search" ]; then + cat enabled_functions | wc -l + elif [ -z "$vsearch" ]; then + grep $search enabled_functions | wc -l + else + grep $search enabled_functions | grep $vsearch| wc -l + fi +} + +set_fgraph() { + instance=$1 + filter="$2" + notrace="$3" + + echo "$filter" > $instance/set_ftrace_filter + echo "$notrace" > $instance/set_ftrace_notrace + echo function_graph > $instance/current_tracer +} + +check_functions() { + orig_cnt=$1 + test=$2 + + cnt=`function_count $test` + if [ $cnt -gt $orig_cnt ]; then + fail + fi +} + +check_cnt() { + orig_cnt=$1 + search=$2 + vsearch=$3 + + cnt=`function_count $search $vsearch` + if [ $cnt -gt $orig_cnt ]; then + fail + fi +} + +reset_graph() { + instance=$1 + echo nop > $instance/current_tracer +} + +# get any functions that were enabled before the test +total_cnt=`function_count` +sched_cnt=`function_count sched` +lock_cnt=`function_count lock` +time_cnt=`function_count time` +clock_cnt=`function_count clock` +locks_clock_cnt=`function_count locks clock` +clock_locks_cnt=`function_count clock locks` + +# Trace functions with "sched" but not "time" +set_fgraph $INSTANCE1 '*sched*' '*time*' + +# Make sure "time" isn't listed +check_functions $time_cnt 'time' +instance1_cnt=`function_count` + +# Trace functions with "lock" but not "clock" +set_fgraph $INSTANCE2 '*lock*' '*clock*' +instance1_2_cnt=`function_count` + +# Turn off the first instance +reset_graph $INSTANCE1 + +# The second instance doesn't trace "clock" functions +check_functions $clock_cnt 'clock' +instance2_cnt=`function_count` + +# Start from a clean slate +reset_graph $INSTANCE2 +check_functions $total_cnt + +# Trace functions with "lock" but not "clock" +set_fgraph $INSTANCE2 '*lock*' '*clock*' + +# This should match the last time instance 2 was by itself +cnt=`function_count` +if [ $instance2_cnt -ne $cnt ]; then + fail +fi + +# And it should not be tracing "clock" functions +check_functions $clock_cnt 'clock' + +# Trace functions with "sched" but not "time" +set_fgraph $INSTANCE1 '*sched*' '*time*' + +# This should match the last time both instances were enabled +cnt=`function_count` +if [ $instance1_2_cnt -ne $cnt ]; then + fail +fi + +# Turn off the second instance +reset_graph $INSTANCE2 + +# This should match the last time instance 1 was by itself +cnt=`function_count` +if [ $instance1_cnt -ne $cnt ]; then + fail +fi + +# And it should not be tracing "time" functions +check_functions $time_cnt 'time' + +# Start from a clean slate +reset_graph $INSTANCE1 +check_functions $total_cnt + +# Enable all functions but those that have "locks" +set_fgraph $INSTANCE1 '' '*locks*' + +# Enable all functions but those that have "clock" +set_fgraph $INSTANCE2 '' '*clock*' + +# If a function has "locks" it should not have "clock" +check_cnt $locks_clock_cnt locks clock + +# If a function has "clock" it should not have "locks" +check_cnt $clock_locks_cnt clock locks + +reset_graph $INSTANCE1 +reset_graph $INSTANCE2 + +do_reset + +exit 0 diff --git a/tools/testing/selftests/futex/functional/futex_wait_wouldblock.c b/tools/testing/selftests/futex/functional/futex_wait_wouldblock.c index 7d7a6a06cdb7..2d8230da9064 100644 --- a/tools/testing/selftests/futex/functional/futex_wait_wouldblock.c +++ b/tools/testing/selftests/futex/functional/futex_wait_wouldblock.c @@ -98,7 +98,7 @@ int main(int argc, char *argv[]) info("Calling futex_waitv on f1: %u @ %p with val=%u\n", f1, &f1, f1+1); res = futex_waitv(&waitv, 1, 0, &to, CLOCK_MONOTONIC); if (!res || errno != EWOULDBLOCK) { - ksft_test_result_pass("futex_waitv returned: %d %s\n", + ksft_test_result_fail("futex_waitv returned: %d %s\n", res ? errno : res, res ? strerror(errno) : ""); ret = RET_FAIL; diff --git a/tools/testing/selftests/hid/config.common b/tools/testing/selftests/hid/config.common index 45b5570441ce..b1f40857307d 100644 --- a/tools/testing/selftests/hid/config.common +++ b/tools/testing/selftests/hid/config.common @@ -39,7 +39,6 @@ CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPUSETS=y -CONFIG_CRC_T10DIF=y CONFIG_CRYPTO_BLAKE2B=y CONFIG_CRYPTO_DEV_VIRTIO=y CONFIG_CRYPTO_SEQIV=y diff --git a/tools/testing/selftests/kvm/arm64/page_fault_test.c b/tools/testing/selftests/kvm/arm64/page_fault_test.c index ec33a8f9c908..dc6559dad9d8 100644 --- a/tools/testing/selftests/kvm/arm64/page_fault_test.c +++ b/tools/testing/selftests/kvm/arm64/page_fault_test.c @@ -199,7 +199,7 @@ static bool guest_set_ha(void) if (hadbs == 0) return false; - tcr = read_sysreg(tcr_el1) | TCR_EL1_HA; + tcr = read_sysreg(tcr_el1) | TCR_HA; write_sysreg(tcr, tcr_el1); isb(); diff --git a/tools/testing/selftests/kvm/include/arm64/processor.h b/tools/testing/selftests/kvm/include/arm64/processor.h index 1e8d0d531fbd..b0fc0f945766 100644 --- a/tools/testing/selftests/kvm/include/arm64/processor.h +++ b/tools/testing/selftests/kvm/include/arm64/processor.h @@ -62,6 +62,67 @@ MAIR_ATTRIDX(MAIR_ATTR_NORMAL, MT_NORMAL) | \ MAIR_ATTRIDX(MAIR_ATTR_NORMAL_WT, MT_NORMAL_WT)) +/* TCR_EL1 specific flags */ +#define TCR_T0SZ_OFFSET 0 +#define TCR_T0SZ(x) ((UL(64) - (x)) << TCR_T0SZ_OFFSET) + +#define TCR_IRGN0_SHIFT 8 +#define TCR_IRGN0_MASK (UL(3) << TCR_IRGN0_SHIFT) +#define TCR_IRGN0_NC (UL(0) << TCR_IRGN0_SHIFT) +#define TCR_IRGN0_WBWA (UL(1) << TCR_IRGN0_SHIFT) +#define TCR_IRGN0_WT (UL(2) << TCR_IRGN0_SHIFT) +#define TCR_IRGN0_WBnWA (UL(3) << TCR_IRGN0_SHIFT) + +#define TCR_ORGN0_SHIFT 10 +#define TCR_ORGN0_MASK (UL(3) << TCR_ORGN0_SHIFT) +#define TCR_ORGN0_NC (UL(0) << TCR_ORGN0_SHIFT) +#define TCR_ORGN0_WBWA (UL(1) << TCR_ORGN0_SHIFT) +#define TCR_ORGN0_WT (UL(2) << TCR_ORGN0_SHIFT) +#define TCR_ORGN0_WBnWA (UL(3) << TCR_ORGN0_SHIFT) + +#define TCR_SH0_SHIFT 12 +#define TCR_SH0_MASK (UL(3) << TCR_SH0_SHIFT) +#define TCR_SH0_INNER (UL(3) << TCR_SH0_SHIFT) + +#define TCR_TG0_SHIFT 14 +#define TCR_TG0_MASK (UL(3) << TCR_TG0_SHIFT) +#define TCR_TG0_4K (UL(0) << TCR_TG0_SHIFT) +#define TCR_TG0_64K (UL(1) << TCR_TG0_SHIFT) +#define TCR_TG0_16K (UL(2) << TCR_TG0_SHIFT) + +#define TCR_IPS_SHIFT 32 +#define TCR_IPS_MASK (UL(7) << TCR_IPS_SHIFT) +#define TCR_IPS_52_BITS (UL(6) << TCR_IPS_SHIFT) +#define TCR_IPS_48_BITS (UL(5) << TCR_IPS_SHIFT) +#define TCR_IPS_40_BITS (UL(2) << TCR_IPS_SHIFT) +#define TCR_IPS_36_BITS (UL(1) << TCR_IPS_SHIFT) + +#define TCR_HA (UL(1) << 39) +#define TCR_DS (UL(1) << 59) + +/* + * AttrIndx[2:0] encoding (mapping attributes defined in the MAIR* registers). + */ +#define PTE_ATTRINDX(t) ((t) << 2) +#define PTE_ATTRINDX_MASK GENMASK(4, 2) +#define PTE_ATTRINDX_SHIFT 2 + +#define PTE_VALID BIT(0) +#define PGD_TYPE_TABLE BIT(1) +#define PUD_TYPE_TABLE BIT(1) +#define PMD_TYPE_TABLE BIT(1) +#define PTE_TYPE_PAGE BIT(1) + +#define PTE_SHARED (UL(3) << 8) /* SH[1:0], inner shareable */ +#define PTE_AF BIT(10) + +#define PTE_ADDR_MASK(page_shift) GENMASK(47, (page_shift)) +#define PTE_ADDR_51_48 GENMASK(15, 12) +#define PTE_ADDR_51_48_SHIFT 12 +#define PTE_ADDR_MASK_LPA2(page_shift) GENMASK(49, (page_shift)) +#define PTE_ADDR_51_50_LPA2 GENMASK(9, 8) +#define PTE_ADDR_51_50_LPA2_SHIFT 8 + void aarch64_vcpu_setup(struct kvm_vcpu *vcpu, struct kvm_vcpu_init *init); struct kvm_vcpu *aarch64_vcpu_add(struct kvm_vm *vm, uint32_t vcpu_id, struct kvm_vcpu_init *init, void *guest_code); @@ -102,12 +163,6 @@ enum { (v) == VECTOR_SYNC_LOWER_64 || \ (v) == VECTOR_SYNC_LOWER_32) -/* Access flag */ -#define PTE_AF (1ULL << 10) - -/* Access flag update enable/disable */ -#define TCR_EL1_HA (1ULL << 39) - void aarch64_get_supported_page_sizes(uint32_t ipa, uint32_t *ipa4k, uint32_t *ipa16k, uint32_t *ipa64k); diff --git a/tools/testing/selftests/kvm/lib/arm64/processor.c b/tools/testing/selftests/kvm/lib/arm64/processor.c index 7ba3aa3755f3..9d69904cb608 100644 --- a/tools/testing/selftests/kvm/lib/arm64/processor.c +++ b/tools/testing/selftests/kvm/lib/arm64/processor.c @@ -72,13 +72,13 @@ static uint64_t addr_pte(struct kvm_vm *vm, uint64_t pa, uint64_t attrs) uint64_t pte; if (use_lpa2_pte_format(vm)) { - pte = pa & GENMASK(49, vm->page_shift); - pte |= FIELD_GET(GENMASK(51, 50), pa) << 8; - attrs &= ~GENMASK(9, 8); + pte = pa & PTE_ADDR_MASK_LPA2(vm->page_shift); + pte |= FIELD_GET(GENMASK(51, 50), pa) << PTE_ADDR_51_50_LPA2_SHIFT; + attrs &= ~PTE_ADDR_51_50_LPA2; } else { - pte = pa & GENMASK(47, vm->page_shift); + pte = pa & PTE_ADDR_MASK(vm->page_shift); if (vm->page_shift == 16) - pte |= FIELD_GET(GENMASK(51, 48), pa) << 12; + pte |= FIELD_GET(GENMASK(51, 48), pa) << PTE_ADDR_51_48_SHIFT; } pte |= attrs; @@ -90,12 +90,12 @@ static uint64_t pte_addr(struct kvm_vm *vm, uint64_t pte) uint64_t pa; if (use_lpa2_pte_format(vm)) { - pa = pte & GENMASK(49, vm->page_shift); - pa |= FIELD_GET(GENMASK(9, 8), pte) << 50; + pa = pte & PTE_ADDR_MASK_LPA2(vm->page_shift); + pa |= FIELD_GET(PTE_ADDR_51_50_LPA2, pte) << 50; } else { - pa = pte & GENMASK(47, vm->page_shift); + pa = pte & PTE_ADDR_MASK(vm->page_shift); if (vm->page_shift == 16) - pa |= FIELD_GET(GENMASK(15, 12), pte) << 48; + pa |= FIELD_GET(PTE_ADDR_51_48, pte) << 48; } return pa; @@ -128,7 +128,8 @@ void virt_arch_pgd_alloc(struct kvm_vm *vm) static void _virt_pg_map(struct kvm_vm *vm, uint64_t vaddr, uint64_t paddr, uint64_t flags) { - uint8_t attr_idx = flags & 7; + uint8_t attr_idx = flags & (PTE_ATTRINDX_MASK >> PTE_ATTRINDX_SHIFT); + uint64_t pg_attr; uint64_t *ptep; TEST_ASSERT((vaddr % vm->page_size) == 0, @@ -147,18 +148,21 @@ static void _virt_pg_map(struct kvm_vm *vm, uint64_t vaddr, uint64_t paddr, ptep = addr_gpa2hva(vm, vm->pgd) + pgd_index(vm, vaddr) * 8; if (!*ptep) - *ptep = addr_pte(vm, vm_alloc_page_table(vm), 3); + *ptep = addr_pte(vm, vm_alloc_page_table(vm), + PGD_TYPE_TABLE | PTE_VALID); switch (vm->pgtable_levels) { case 4: ptep = addr_gpa2hva(vm, pte_addr(vm, *ptep)) + pud_index(vm, vaddr) * 8; if (!*ptep) - *ptep = addr_pte(vm, vm_alloc_page_table(vm), 3); + *ptep = addr_pte(vm, vm_alloc_page_table(vm), + PUD_TYPE_TABLE | PTE_VALID); /* fall through */ case 3: ptep = addr_gpa2hva(vm, pte_addr(vm, *ptep)) + pmd_index(vm, vaddr) * 8; if (!*ptep) - *ptep = addr_pte(vm, vm_alloc_page_table(vm), 3); + *ptep = addr_pte(vm, vm_alloc_page_table(vm), + PMD_TYPE_TABLE | PTE_VALID); /* fall through */ case 2: ptep = addr_gpa2hva(vm, pte_addr(vm, *ptep)) + pte_index(vm, vaddr) * 8; @@ -167,7 +171,11 @@ static void _virt_pg_map(struct kvm_vm *vm, uint64_t vaddr, uint64_t paddr, TEST_FAIL("Page table levels must be 2, 3, or 4"); } - *ptep = addr_pte(vm, paddr, (attr_idx << 2) | (1 << 10) | 3); /* AF */ + pg_attr = PTE_AF | PTE_ATTRINDX(attr_idx) | PTE_TYPE_PAGE | PTE_VALID; + if (!use_lpa2_pte_format(vm)) + pg_attr |= PTE_SHARED; + + *ptep = addr_pte(vm, paddr, pg_attr); } void virt_arch_pg_map(struct kvm_vm *vm, uint64_t vaddr, uint64_t paddr) @@ -293,20 +301,20 @@ void aarch64_vcpu_setup(struct kvm_vcpu *vcpu, struct kvm_vcpu_init *init) case VM_MODE_P48V48_64K: case VM_MODE_P40V48_64K: case VM_MODE_P36V48_64K: - tcr_el1 |= 1ul << 14; /* TG0 = 64KB */ + tcr_el1 |= TCR_TG0_64K; break; case VM_MODE_P52V48_16K: case VM_MODE_P48V48_16K: case VM_MODE_P40V48_16K: case VM_MODE_P36V48_16K: case VM_MODE_P36V47_16K: - tcr_el1 |= 2ul << 14; /* TG0 = 16KB */ + tcr_el1 |= TCR_TG0_16K; break; case VM_MODE_P52V48_4K: case VM_MODE_P48V48_4K: case VM_MODE_P40V48_4K: case VM_MODE_P36V48_4K: - tcr_el1 |= 0ul << 14; /* TG0 = 4KB */ + tcr_el1 |= TCR_TG0_4K; break; default: TEST_FAIL("Unknown guest mode, mode: 0x%x", vm->mode); @@ -319,35 +327,35 @@ void aarch64_vcpu_setup(struct kvm_vcpu *vcpu, struct kvm_vcpu_init *init) case VM_MODE_P52V48_4K: case VM_MODE_P52V48_16K: case VM_MODE_P52V48_64K: - tcr_el1 |= 6ul << 32; /* IPS = 52 bits */ + tcr_el1 |= TCR_IPS_52_BITS; ttbr0_el1 |= FIELD_GET(GENMASK(51, 48), vm->pgd) << 2; break; case VM_MODE_P48V48_4K: case VM_MODE_P48V48_16K: case VM_MODE_P48V48_64K: - tcr_el1 |= 5ul << 32; /* IPS = 48 bits */ + tcr_el1 |= TCR_IPS_48_BITS; break; case VM_MODE_P40V48_4K: case VM_MODE_P40V48_16K: case VM_MODE_P40V48_64K: - tcr_el1 |= 2ul << 32; /* IPS = 40 bits */ + tcr_el1 |= TCR_IPS_40_BITS; break; case VM_MODE_P36V48_4K: case VM_MODE_P36V48_16K: case VM_MODE_P36V48_64K: case VM_MODE_P36V47_16K: - tcr_el1 |= 1ul << 32; /* IPS = 36 bits */ + tcr_el1 |= TCR_IPS_36_BITS; break; default: TEST_FAIL("Unknown guest mode, mode: 0x%x", vm->mode); } - sctlr_el1 |= (1 << 0) | (1 << 2) | (1 << 12) /* M | C | I */; - /* TCR_EL1 |= IRGN0:WBWA | ORGN0:WBWA | SH0:Inner-Shareable */; - tcr_el1 |= (1 << 8) | (1 << 10) | (3 << 12); - tcr_el1 |= (64 - vm->va_bits) /* T0SZ */; + sctlr_el1 |= SCTLR_ELx_M | SCTLR_ELx_C | SCTLR_ELx_I; + + tcr_el1 |= TCR_IRGN0_WBWA | TCR_ORGN0_WBWA | TCR_SH0_INNER; + tcr_el1 |= TCR_T0SZ(vm->va_bits); if (use_lpa2_pte_format(vm)) - tcr_el1 |= (1ul << 59) /* DS */; + tcr_el1 |= TCR_DS; vcpu_set_reg(vcpu, KVM_ARM64_SYS_REG(SYS_SCTLR_EL1), sctlr_el1); vcpu_set_reg(vcpu, KVM_ARM64_SYS_REG(SYS_TCR_EL1), tcr_el1); diff --git a/tools/testing/selftests/mincore/mincore_selftest.c b/tools/testing/selftests/mincore/mincore_selftest.c index e949a43a6145..efabfcbe0b49 100644 --- a/tools/testing/selftests/mincore/mincore_selftest.c +++ b/tools/testing/selftests/mincore/mincore_selftest.c @@ -261,9 +261,6 @@ TEST(check_file_mmap) TH_LOG("No read-ahead pages found in memory"); } - EXPECT_LT(i, vec_size) { - TH_LOG("Read-ahead pages reached the end of the file"); - } /* * End of the readahead window. The rest of the pages shouldn't * be in memory. diff --git a/tools/testing/selftests/net/.gitignore b/tools/testing/selftests/net/.gitignore index 679542f565a4..532bb732bc6d 100644 --- a/tools/testing/selftests/net/.gitignore +++ b/tools/testing/selftests/net/.gitignore @@ -39,6 +39,7 @@ scm_rights sk_bind_sendto_listen sk_connect_zero_addr sk_so_peek_off +skf_net_off socket so_incoming_cpu so_netns_cookie diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile index 6d718b478ed8..124078b56fa4 100644 --- a/tools/testing/selftests/net/Makefile +++ b/tools/testing/selftests/net/Makefile @@ -106,6 +106,8 @@ TEST_PROGS += ipv6_route_update_soft_lockup.sh TEST_PROGS += busy_poll_test.sh TEST_GEN_PROGS += proc_net_pktgen TEST_PROGS += lwt_dst_cache_ref_loop.sh +TEST_PROGS += skf_net_off.sh +TEST_GEN_FILES += skf_net_off # YNL files, must be before "include ..lib.mk" YNL_GEN_FILES := busy_poller netlink-dumps diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index 13a3b68181ee..befa66f5a366 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -1441,6 +1441,15 @@ chk_join_nr() fi fi + count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtMPJoinSynAckHMacFailure") + if [ -z "$count" ]; then + rc=${KSFT_SKIP} + elif [ "$count" != "0" ]; then + rc=${KSFT_FAIL} + print_check "synack HMAC" + fail_test "got $count JOIN[s] synack HMAC failure expected 0" + fi + count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPJoinAckRx") if [ -z "$count" ]; then rc=${KSFT_SKIP} @@ -1450,6 +1459,15 @@ chk_join_nr() fail_test "got $count JOIN[s] ack rx expected $ack_nr" fi + count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPJoinAckHMacFailure") + if [ -z "$count" ]; then + rc=${KSFT_SKIP} + elif [ "$count" != "0" ]; then + rc=${KSFT_FAIL} + print_check "ack HMAC" + fail_test "got $count JOIN[s] ack HMAC failure expected 0" + fi + print_results "join Rx" ${rc} join_syn_tx="${join_syn_tx:-${syn_nr}}" \ diff --git a/tools/testing/selftests/net/netfilter/nft_concat_range.sh b/tools/testing/selftests/net/netfilter/nft_concat_range.sh index 47088b005390..1f5979c1510c 100755 --- a/tools/testing/selftests/net/netfilter/nft_concat_range.sh +++ b/tools/testing/selftests/net/netfilter/nft_concat_range.sh @@ -27,7 +27,7 @@ TYPES="net_port port_net net6_port port_proto net6_port_mac net6_port_mac_proto net6_port_net6_port net_port_mac_proto_net" # Reported bugs, also described by TYPE_ variables below -BUGS="flush_remove_add reload net_port_proto_match" +BUGS="flush_remove_add reload net_port_proto_match avx2_mismatch" # List of possible paths to pktgen script from kernel tree for performance tests PKTGEN_SCRIPT_PATHS=" @@ -387,6 +387,25 @@ race_repeat 0 perf_duration 0 " + +TYPE_avx2_mismatch=" +display avx2 false match +type_spec inet_proto . ipv6_addr +chain_spec meta l4proto . ip6 daddr +dst proto addr6 +src +start 1 +count 1 +src_delta 1 +tools ping +proto icmp6 + +race_repeat 0 + +perf_duration 0 +" + + # Set template for all tests, types and rules are filled in depending on test set_template=' flush ruleset @@ -1629,6 +1648,24 @@ test_bug_net_port_proto_match() { nft flush ruleset } +test_bug_avx2_mismatch() +{ + setup veth send_"${proto}" set || return ${ksft_skip} + + local a1="fe80:dead:01ff:0a02:0b03:6007:8009:a001" + local a2="fe80:dead:01fe:0a02:0b03:6007:8009:a001" + + nft "add element inet filter test { icmpv6 . $a1 }" + + dst_addr6="$a2" + send_icmp6 + + if [ "$(count_packets)" -gt "0" ]; then + err "False match for $a2" + return 1 + fi +} + test_reported_issues() { eval test_bug_"${subtest}" } diff --git a/tools/testing/selftests/net/skf_net_off.c b/tools/testing/selftests/net/skf_net_off.c new file mode 100644 index 000000000000..1fdf61d6cd7f --- /dev/null +++ b/tools/testing/selftests/net/skf_net_off.c @@ -0,0 +1,244 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* Open a tun device. + * + * [modifications: use IFF_NAPI_FRAGS, add sk filter] + * + * Expects the device to have been configured previously, e.g.: + * sudo ip tuntap add name tap1 mode tap + * sudo ip link set tap1 up + * sudo ip link set dev tap1 addr 02:00:00:00:00:01 + * sudo ip -6 addr add fdab::1 peer fdab::2 dev tap1 nodad + * + * And to avoid premature pskb_may_pull: + * + * sudo ethtool -K tap1 gro off + * sudo bash -c 'echo 0 > /proc/sys/net/ipv4/ip_early_demux' + */ + +#define _GNU_SOURCE + +#include <arpa/inet.h> +#include <errno.h> +#include <error.h> +#include <fcntl.h> +#include <getopt.h> +#include <linux/filter.h> +#include <linux/if.h> +#include <linux/if_packet.h> +#include <linux/if_tun.h> +#include <linux/ipv6.h> +#include <netinet/if_ether.h> +#include <netinet/in.h> +#include <netinet/ip.h> +#include <netinet/ip6.h> +#include <netinet/udp.h> +#include <poll.h> +#include <signal.h> +#include <stdbool.h> +#include <stddef.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <sys/ioctl.h> +#include <sys/socket.h> +#include <sys/poll.h> +#include <sys/types.h> +#include <sys/uio.h> +#include <unistd.h> + +static bool cfg_do_filter; +static bool cfg_do_frags; +static int cfg_dst_port = 8000; +static char *cfg_ifname; + +static int tun_open(const char *tun_name) +{ + struct ifreq ifr = {0}; + int fd, ret; + + fd = open("/dev/net/tun", O_RDWR); + if (fd == -1) + error(1, errno, "open /dev/net/tun"); + + ifr.ifr_flags = IFF_TAP; + if (cfg_do_frags) + ifr.ifr_flags |= IFF_NAPI | IFF_NAPI_FRAGS; + + strncpy(ifr.ifr_name, tun_name, IFNAMSIZ - 1); + + ret = ioctl(fd, TUNSETIFF, &ifr); + if (ret) + error(1, ret, "ioctl TUNSETIFF"); + + return fd; +} + +static void sk_set_filter(int fd) +{ + const int offset_proto = offsetof(struct ip6_hdr, ip6_nxt); + const int offset_dport = sizeof(struct ip6_hdr) + offsetof(struct udphdr, dest); + + /* Filter UDP packets with destination port cfg_dst_port */ + struct sock_filter filter_code[] = { + BPF_STMT(BPF_LD + BPF_B + BPF_ABS, SKF_AD_OFF + SKF_AD_PKTTYPE), + BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, PACKET_HOST, 0, 4), + BPF_STMT(BPF_LD + BPF_B + BPF_ABS, SKF_NET_OFF + offset_proto), + BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, IPPROTO_UDP, 0, 2), + BPF_STMT(BPF_LD + BPF_H + BPF_ABS, SKF_NET_OFF + offset_dport), + BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, cfg_dst_port, 1, 0), + BPF_STMT(BPF_RET + BPF_K, 0), + BPF_STMT(BPF_RET + BPF_K, 0xFFFF), + }; + + struct sock_fprog filter = { + sizeof(filter_code) / sizeof(filter_code[0]), + filter_code, + }; + + if (setsockopt(fd, SOL_SOCKET, SO_ATTACH_FILTER, &filter, sizeof(filter))) + error(1, errno, "setsockopt attach filter"); +} + +static int raw_open(void) +{ + int fd; + + fd = socket(PF_INET6, SOCK_RAW, IPPROTO_UDP); + if (fd == -1) + error(1, errno, "socket raw (udp)"); + + if (cfg_do_filter) + sk_set_filter(fd); + + return fd; +} + +static void tun_write(int fd) +{ + const char eth_src[] = { 0x02, 0x00, 0x00, 0x00, 0x00, 0x02 }; + const char eth_dst[] = { 0x02, 0x00, 0x00, 0x00, 0x00, 0x01 }; + struct tun_pi pi = {0}; + struct ipv6hdr ip6h = {0}; + struct udphdr uh = {0}; + struct ethhdr eth = {0}; + uint32_t payload; + struct iovec iov[5]; + int ret; + + pi.proto = htons(ETH_P_IPV6); + + memcpy(eth.h_source, eth_src, sizeof(eth_src)); + memcpy(eth.h_dest, eth_dst, sizeof(eth_dst)); + eth.h_proto = htons(ETH_P_IPV6); + + ip6h.version = 6; + ip6h.payload_len = htons(sizeof(uh) + sizeof(uint32_t)); + ip6h.nexthdr = IPPROTO_UDP; + ip6h.hop_limit = 8; + if (inet_pton(AF_INET6, "fdab::2", &ip6h.saddr) != 1) + error(1, errno, "inet_pton src"); + if (inet_pton(AF_INET6, "fdab::1", &ip6h.daddr) != 1) + error(1, errno, "inet_pton src"); + + uh.source = htons(8000); + uh.dest = htons(cfg_dst_port); + uh.len = ip6h.payload_len; + uh.check = 0; + + payload = htonl(0xABABABAB); /* Covered in IPv6 length */ + + iov[0].iov_base = π + iov[0].iov_len = sizeof(pi); + iov[1].iov_base = ð + iov[1].iov_len = sizeof(eth); + iov[2].iov_base = &ip6h; + iov[2].iov_len = sizeof(ip6h); + iov[3].iov_base = &uh; + iov[3].iov_len = sizeof(uh); + iov[4].iov_base = &payload; + iov[4].iov_len = sizeof(payload); + + ret = writev(fd, iov, sizeof(iov) / sizeof(iov[0])); + if (ret <= 0) + error(1, errno, "writev"); +} + +static void raw_read(int fd) +{ + struct timeval tv = { .tv_usec = 100 * 1000 }; + struct msghdr msg = {0}; + struct iovec iov[2]; + struct udphdr uh; + uint32_t payload[2]; + int ret; + + if (setsockopt(fd, SOL_SOCKET, SO_RCVTIMEO, &tv, sizeof(tv))) + error(1, errno, "setsockopt rcvtimeo udp"); + + iov[0].iov_base = &uh; + iov[0].iov_len = sizeof(uh); + + iov[1].iov_base = payload; + iov[1].iov_len = sizeof(payload); + + msg.msg_iov = iov; + msg.msg_iovlen = sizeof(iov) / sizeof(iov[0]); + + ret = recvmsg(fd, &msg, 0); + if (ret <= 0) + error(1, errno, "read raw"); + if (ret != sizeof(uh) + sizeof(payload[0])) + error(1, errno, "read raw: len=%d\n", ret); + + fprintf(stderr, "raw recv: 0x%x\n", payload[0]); +} + +static void parse_opts(int argc, char **argv) +{ + int c; + + while ((c = getopt(argc, argv, "fFi:")) != -1) { + switch (c) { + case 'f': + cfg_do_filter = true; + printf("bpf filter enabled\n"); + break; + case 'F': + cfg_do_frags = true; + printf("napi frags mode enabled\n"); + break; + case 'i': + cfg_ifname = optarg; + break; + default: + error(1, 0, "unknown option %c", optopt); + break; + } + } + + if (!cfg_ifname) + error(1, 0, "must specify tap interface name (-i)"); +} + +int main(int argc, char **argv) +{ + int fdt, fdr; + + parse_opts(argc, argv); + + fdr = raw_open(); + fdt = tun_open(cfg_ifname); + + tun_write(fdt); + raw_read(fdr); + + if (close(fdt)) + error(1, errno, "close tun"); + if (close(fdr)) + error(1, errno, "close udp"); + + fprintf(stderr, "OK\n"); + return 0; +} + diff --git a/tools/testing/selftests/net/skf_net_off.sh b/tools/testing/selftests/net/skf_net_off.sh new file mode 100755 index 000000000000..5da5066fb465 --- /dev/null +++ b/tools/testing/selftests/net/skf_net_off.sh @@ -0,0 +1,30 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +readonly NS="ns-$(mktemp -u XXXXXX)" + +cleanup() { + ip netns del $NS +} + +ip netns add $NS +trap cleanup EXIT + +ip -netns $NS link set lo up +ip -netns $NS tuntap add name tap1 mode tap +ip -netns $NS link set tap1 up +ip -netns $NS link set dev tap1 addr 02:00:00:00:00:01 +ip -netns $NS -6 addr add fdab::1 peer fdab::2 dev tap1 nodad +ip netns exec $NS ethtool -K tap1 gro off + +# disable early demux, else udp_v6_early_demux pulls udp header into linear +ip netns exec $NS sysctl -w net.ipv4.ip_early_demux=0 + +echo "no filter" +ip netns exec $NS ./skf_net_off -i tap1 + +echo "filter, linear skb (-f)" +ip netns exec $NS ./skf_net_off -i tap1 -f + +echo "filter, fragmented skb (-f) (-F)" +ip netns exec $NS ./skf_net_off -i tap1 -f -F diff --git a/tools/testing/selftests/net/tls.c b/tools/testing/selftests/net/tls.c index 9a85f93c33d8..5ded3b3a7538 100644 --- a/tools/testing/selftests/net/tls.c +++ b/tools/testing/selftests/net/tls.c @@ -1753,6 +1753,42 @@ TEST_F(tls_basic, rekey_tx) EXPECT_EQ(memcmp(buf, test_str, send_len), 0); } +TEST_F(tls_basic, disconnect) +{ + char const *test_str = "test_message"; + int send_len = strlen(test_str) + 1; + struct tls_crypto_info_keys key; + struct sockaddr_in addr; + char buf[20]; + int ret; + + if (self->notls) + return; + + tls_crypto_info_init(TLS_1_3_VERSION, TLS_CIPHER_AES_GCM_128, + &key, 0); + + ret = setsockopt(self->fd, SOL_TLS, TLS_TX, &key, key.len); + ASSERT_EQ(ret, 0); + + /* Pre-queue the data so that setsockopt parses it but doesn't + * dequeue it from the TCP socket. recvmsg would dequeue. + */ + EXPECT_EQ(send(self->fd, test_str, send_len, 0), send_len); + + ret = setsockopt(self->cfd, SOL_TLS, TLS_RX, &key, key.len); + ASSERT_EQ(ret, 0); + + addr.sin_family = AF_UNSPEC; + addr.sin_addr.s_addr = htonl(INADDR_ANY); + addr.sin_port = 0; + ret = connect(self->cfd, &addr, sizeof(addr)); + EXPECT_EQ(ret, -1); + EXPECT_EQ(errno, EOPNOTSUPP); + + EXPECT_EQ(recv(self->cfd, buf, send_len, 0), send_len); +} + TEST_F(tls, rekey) { char const *test_str_1 = "test_message_before_rekey"; diff --git a/tools/testing/selftests/tc-testing/tc-tests/infra/qdiscs.json b/tools/testing/selftests/tc-testing/tc-tests/infra/qdiscs.json index 25454fd95537..d4ea9cd845a3 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/infra/qdiscs.json +++ b/tools/testing/selftests/tc-testing/tc-tests/infra/qdiscs.json @@ -158,5 +158,160 @@ "$TC qdisc del dev $DUMMY handle 1: root", "$IP addr del 10.10.10.10/24 dev $DUMMY || true" ] + }, + { + "id": "a4bb", + "name": "Test FQ_CODEL with HTB parent - force packet drop with empty queue", + "category": [ + "qdisc", + "fq_codel", + "htb" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link set dev $DUMMY up || true", + "$IP addr add 10.10.10.10/24 dev $DUMMY || true", + "$TC qdisc add dev $DUMMY handle 1: root htb default 10", + "$TC class add dev $DUMMY parent 1: classid 1:10 htb rate 1kbit", + "$TC qdisc add dev $DUMMY parent 1:10 handle 10: fq_codel memory_limit 1 flows 1 target 0.1ms interval 1ms", + "$TC filter add dev $DUMMY parent 1: protocol ip prio 1 u32 match ip protocol 1 0xff flowid 1:10", + "ping -c 5 -f -I $DUMMY 10.10.10.1 > /dev/null || true", + "sleep 0.1" + ], + "cmdUnderTest": "$TC -s qdisc show dev $DUMMY", + "expExitCode": "0", + "verifyCmd": "$TC -s qdisc show dev $DUMMY | grep -A 5 'qdisc fq_codel'", + "matchPattern": "dropped [1-9][0-9]*", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP addr del 10.10.10.10/24 dev $DUMMY || true" + ] + }, + { + "id": "a4be", + "name": "Test FQ_CODEL with QFQ parent - force packet drop with empty queue", + "category": [ + "qdisc", + "fq_codel", + "qfq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link set dev $DUMMY up || true", + "$IP addr add 10.10.10.10/24 dev $DUMMY || true", + "$TC qdisc add dev $DUMMY handle 1: root qfq", + "$TC class add dev $DUMMY parent 1: classid 1:10 qfq weight 1 maxpkt 1000", + "$TC qdisc add dev $DUMMY parent 1:10 handle 10: fq_codel memory_limit 1 flows 1 target 0.1ms interval 1ms", + "$TC filter add dev $DUMMY parent 1: protocol ip prio 1 u32 match ip protocol 1 0xff flowid 1:10", + "ping -c 10 -s 1000 -f -I $DUMMY 10.10.10.1 > /dev/null || true", + "sleep 0.1" + ], + "cmdUnderTest": "$TC -s qdisc show dev $DUMMY", + "expExitCode": "0", + "verifyCmd": "$TC -s qdisc show dev $DUMMY | grep -A 5 'qdisc fq_codel'", + "matchPattern": "dropped [1-9][0-9]*", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP addr del 10.10.10.10/24 dev $DUMMY || true" + ] + }, + { + "id": "a4bf", + "name": "Test FQ_CODEL with HFSC parent - force packet drop with empty queue", + "category": [ + "qdisc", + "fq_codel", + "hfsc" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link set dev $DUMMY up || true", + "$IP addr add 10.10.10.10/24 dev $DUMMY || true", + "$TC qdisc add dev $DUMMY handle 1: root hfsc default 10", + "$TC class add dev $DUMMY parent 1: classid 1:10 hfsc sc rate 1kbit ul rate 1kbit", + "$TC qdisc add dev $DUMMY parent 1:10 handle 10: fq_codel memory_limit 1 flows 1 target 0.1ms interval 1ms", + "$TC filter add dev $DUMMY parent 1: protocol ip prio 1 u32 match ip protocol 1 0xff flowid 1:10", + "ping -c 5 -f -I $DUMMY 10.10.10.1 > /dev/null || true", + "sleep 0.1" + ], + "cmdUnderTest": "$TC -s qdisc show dev $DUMMY", + "expExitCode": "0", + "verifyCmd": "$TC -s qdisc show dev $DUMMY | grep -A 5 'qdisc fq_codel'", + "matchPattern": "dropped [1-9][0-9]*", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP addr del 10.10.10.10/24 dev $DUMMY || true" + ] + }, + { + "id": "a4c0", + "name": "Test FQ_CODEL with DRR parent - force packet drop with empty queue", + "category": [ + "qdisc", + "fq_codel", + "drr" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link set dev $DUMMY up || true", + "$IP addr add 10.10.10.10/24 dev $DUMMY || true", + "$TC qdisc add dev $DUMMY handle 1: root drr", + "$TC class add dev $DUMMY parent 1: classid 1:10 drr quantum 1500", + "$TC qdisc add dev $DUMMY parent 1:10 handle 10: fq_codel memory_limit 1 flows 1 target 0.1ms interval 1ms", + "$TC filter add dev $DUMMY parent 1: protocol ip prio 1 u32 match ip protocol 1 0xff flowid 1:10", + "ping -c 5 -f -I $DUMMY 10.10.10.1 > /dev/null || true", + "sleep 0.1" + ], + "cmdUnderTest": "$TC -s qdisc show dev $DUMMY", + "expExitCode": "0", + "verifyCmd": "$TC -s qdisc show dev $DUMMY | grep -A 5 'qdisc fq_codel'", + "matchPattern": "dropped [1-9][0-9]*", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP addr del 10.10.10.10/24 dev $DUMMY || true" + ] + }, + { + "id": "a4c1", + "name": "Test FQ_CODEL with ETS parent - force packet drop with empty queue", + "category": [ + "qdisc", + "fq_codel", + "ets" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$IP link set dev $DUMMY up || true", + "$IP addr add 10.10.10.10/24 dev $DUMMY || true", + "$TC qdisc add dev $DUMMY handle 1: root ets bands 2 strict 1", + "$TC class change dev $DUMMY parent 1: classid 1:1 ets", + "$TC qdisc add dev $DUMMY parent 1:1 handle 10: fq_codel memory_limit 1 flows 1 target 0.1ms interval 1ms", + "$TC filter add dev $DUMMY parent 1: protocol ip prio 1 u32 match ip protocol 1 0xff flowid 1:1", + "ping -c 5 -f -I $DUMMY 10.10.10.1 > /dev/null || true", + "sleep 0.1" + ], + "cmdUnderTest": "$TC -s qdisc show dev $DUMMY", + "expExitCode": "0", + "verifyCmd": "$TC -s qdisc show dev $DUMMY | grep -A 5 'qdisc fq_codel'", + "matchPattern": "dropped [1-9][0-9]*", + "matchCount": "1", + "teardown": [ + "$TC qdisc del dev $DUMMY handle 1: root", + "$IP addr del 10.10.10.10/24 dev $DUMMY || true" + ] } ] diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfq.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfq.json index 50e8d72781cb..28c6ce6da7db 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfq.json +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfq.json @@ -228,5 +228,41 @@ "matchCount": "0", "teardown": [ ] + }, + { + "id": "7f8f", + "name": "Check that a derived limit of 1 is rejected (limit 2 depth 1 flows 1)", + "category": [ + "qdisc", + "sfq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfq limit 2 depth 1 flows 1", + "expExitCode": "2", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "sfq", + "matchCount": "0", + "teardown": [] + }, + { + "id": "5168", + "name": "Check that a derived limit of 1 is rejected (limit 2 depth 1 divisor 1)", + "category": [ + "qdisc", + "sfq" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [], + "cmdUnderTest": "$TC qdisc add dev $DUMMY handle 1: root sfq limit 2 depth 1 divisor 1", + "expExitCode": "2", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "sfq", + "matchCount": "0", + "teardown": [] } ] diff --git a/tools/testing/selftests/tpm2/.gitignore b/tools/testing/selftests/tpm2/.gitignore new file mode 100644 index 000000000000..6d6165c5e35d --- /dev/null +++ b/tools/testing/selftests/tpm2/.gitignore @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0-only +AsyncTest.log +SpaceTest.log diff --git a/tools/testing/selftests/tpm2/test_smoke.sh b/tools/testing/selftests/tpm2/test_smoke.sh index 168f4b166234..3a60e6c6f5c9 100755 --- a/tools/testing/selftests/tpm2/test_smoke.sh +++ b/tools/testing/selftests/tpm2/test_smoke.sh @@ -6,6 +6,6 @@ ksft_skip=4 [ -e /dev/tpm0 ] || exit $ksft_skip read tpm_version < /sys/class/tpm/tpm0/tpm_version_major -[ "$tpm_version" == 2 ] || exit $ksft_skip +[ "$tpm_version" = 2 ] || exit $ksft_skip python3 -m unittest -v tpm2_tests.SmokeTest 2>&1 diff --git a/tools/testing/selftests/ublk/test_stripe_04.sh b/tools/testing/selftests/ublk/test_stripe_04.sh new file mode 100755 index 000000000000..1f2b642381d1 --- /dev/null +++ b/tools/testing/selftests/ublk/test_stripe_04.sh @@ -0,0 +1,24 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +. "$(cd "$(dirname "$0")" && pwd)"/test_common.sh + +TID="stripe_04" +ERR_CODE=0 + +_prep_test "stripe" "mkfs & mount & umount on zero copy" + +backfile_0=$(_create_backfile 256M) +backfile_1=$(_create_backfile 256M) +dev_id=$(_add_ublk_dev -t stripe -z -q 2 "$backfile_0" "$backfile_1") +_check_add_dev $TID $? "$backfile_0" "$backfile_1" + +_mkfs_mount_test /dev/ublkb"${dev_id}" +ERR_CODE=$? + +_cleanup_test "stripe" + +_remove_backfile "$backfile_0" +_remove_backfile "$backfile_1" + +_show_result $TID $ERR_CODE |