Age | Commit message (Collapse) | Author |
|
This code accidentally returns success, but it should return the
-EIO error code from adfs_fplus_validate_header().
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Fixes: d79288b4f61b ("fs/adfs: bigdir: calculate and validate directory checkbyte")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Add an introduction to adfs to its documentation detailing which formats
are supported by the module.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Avoid using the inode number as the indirect disc address, even though
these currently have the same value.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Add support for ADFS E and E+ floppy image formats, which, unlike their
hard disk variants, do not have a filesystem boot block - they have a
single map zone, with the map fragment stored at sector 0.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Separate the filesystem block probing from the superblock filling so
we can support other ADFS filesystem formats, such as the single-zone
E and E+ floppy image formats which do not have a boot block.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Remove the noisy debug in adfs_dir_update().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
When we have write support enabled, we must not drop inodes before they
have been written back, otherwise we lose updates to the filesystem on
umount. Keep the inodes around unless we are built in read-only mode,
or we are mounted read-only.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Implement big directory entry update support in the same way that we
do for new directories.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
When reading a big directory, calculate the validate the directory
checkbyte to ensure that the directory contents are valid.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Strengthen the directory validation by ensuring that the header fields
contain sensible values that fit inside the directory, and limit the
directory size to 4MB as per RISC OS requirements.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Extract the directory validation from the directory reading function as
we will want to re-use this code.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Factor out the directory entry byte offset calculation.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
After changing a directory, we need to update the sequence numbers and
calculate the new check byte before the directory is scheduled to be
written back to the media. Since this needs to happen for any change
to the directory, move this into a separate method.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
__adfs_dir_put() and adfs_dir_find_entry() are only called from
adfs_f_update(), so move them into this function, removing some
unnecessary entry copying by doing so.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
adfs_dir_read() is only called from adfs_f_read(), so merge it into
that function. As new directories are always 2048 bytes in size,
(which we rely on elsewhere) we can consolidate some of the code.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Check that the lastmask and reserved fields are all zero, as per the
documentation.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
We have two locations where we validate the new directory format, so
factor this out to a helper.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Add and use pointers in the adfs_dir structure to access the directory
head and tail structures, which will always be contiguous in a buffer.
This allows us to avoid memcpy()ing the data in the new directory code,
making it slightly more efficient.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Rather than using setpos + getnext to iterate through the directory
entries, pass iterate() down to the dir format code to populate the
dirents.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
There is nothing in our readdir (aka iterate) method that relies on
the directory inode being exclusively locked, so switch to using the
iterate_shared() hook rather than iterate().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Get rid of the ifdef, using IS_ENABLED() instead to detect whether the
code should be callable. This allows the compiler to always parse the
following code, reducing the chances of errors being missed.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
When we update a directory, a number of errors may happen. If we failed
to find the entry to update, we can just release the directory buffers
as normal.
However, if we have some other error, we may have partially updated the
buffers, resulting in an invalid directory. In this case, we need to
discard the buffers to avoid writing the contents back to the media, and
later re-read the directory from the media.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Use __u8 and pack the structures for on-disk directories.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Update directory locking such that it covers the validation of the
directory, which could fail if another thread is concurrently writing
to the same directory. Since we may sleep, we need to use a rwsem
rather than a rw spinlock.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Provide a helper for marking directory buffers dirty so they get
written back to disk.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Add a helper to read a directory using the inode, which we do in two
places.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Both directory formats code the mechanics of fetching the directory
buffers using their own implementations. Consolidate these into one
implementation.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Directories can span multiple buffers, and we currently open-code
memcpy access to these buffers, including dealing with entries that
are split across multiple buffers. Such code exists in both
directory format implementations.
Provide common functions to allow data to be copied from/to the
directory buffers as if they were a contiguous set of buffers, and
use them when accessing directories.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
adfs_fplus_sync() can be used for both directory formats since we now
have a common way to access the buffer heads, so move it into dir.c
and appropriately rename it. Remove the directory-format specific
implementations.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
With the bhs pointer in place, we have no need for separate per-format
free() methods, since a generic version will do. Provide a generic
implementation, remove the format specific implementations and the
method function pointer.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Initialise the dir object before we pass it down to the directory format
specific read handler. This allows us to get rid of the initialisation
inside those handlers.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Rename bh_fplus to bhs in preparation to make some of the directory
handling code sharable between implementations.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
When scanning the map for a fragment id, we need to keep track of the
free space links, so we don't inadvertently believe that the freespace
link is a valid fragment id.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Move map specific superblock initialisation to map.c, rather than
having it spread into super.c.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Use find_next_bit_le() to find the end of a fragment in the map rather
than open-coding this functionality.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
lookup_zone() and scan_free_map() cope in different ways with the
location of the map data within a zone:
1. lookup_zone() adds a four byte offset to the map data pointer to
skip over the check and free link bytes.
2. scan_free_map() needs to use the free link pointer, which is an
offset from itself, so we end up adding a 32-bit offset to the
end pointer (aka mapsize) which is really confusing.
Rename mapsize to endbit as this is really what it is, and incorporate
the 32-bit offset into the map layout. This means that both dm_startbit
and dm_endbit are now bit offsets from the start of the buffer, rather
than four bytes in to the buffer.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
We have several places which deal with releasing the map buffers and
freeing the map array. Provide a helper for this.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Split up adfs_read_map() into separate helpers to layout the map,
read the map, and release the map buffers.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
adfs_map_free() is not obvious whether it is freeing the map or
returning the number of free blocks on the filesystem. Rename it to
the more generic statfs() to make it clear that it's a statistic
function.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Keep all the map code together in map.c, rather than having some in
super.c
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Fix adfs_mode2atts() to actually update the file permissions on the
media rather than using the current inode mode. Note also that
directories do not have read/write permissions stored on the media.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Despite ADFS timestamps having centi-second granularity, and Linux
gaining fine-grained timestamp support in v2.5.48, fs/adfs was never
updated.
Update fs/adfs to centi-second support, and ensure that the inode ctime
always reflects what is written in underlying media.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
|
|
Pull networking fixes from David Miller:
1) More jumbo frame fixes in r8169, from Heiner Kallweit.
2) Fix bpf build in minimal configuration, from Alexei Starovoitov.
3) Use after free in slcan driver, from Jouni Hogander.
4) Flower classifier port ranges don't work properly in the HW offload
case, from Yoshiki Komachi.
5) Use after free in hns3_nic_maybe_stop_tx(), from Yunsheng Lin.
6) Out of bounds access in mqprio_dump(), from Vladyslav Tarasiuk.
7) Fix flow dissection in dsa TX path, from Alexander Lobakin.
8) Stale syncookie timestampe fixes from Guillaume Nault.
[ Did an evil merge to silence a warning introduced by this pull - Linus ]
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
r8169: fix rtl_hw_jumbo_disable for RTL8168evl
net_sched: validate TCA_KIND attribute in tc_chain_tmplt_add()
r8169: add missing RX enabling for WoL on RTL8125
vhost/vsock: accept only packets with the right dst_cid
net: phy: dp83867: fix hfs boot in rgmii mode
net: ethernet: ti: cpsw: fix extra rx interrupt
inet: protect against too small mtu values.
gre: refetch erspan header from skb->data after pskb_may_pull()
pppoe: remove redundant BUG_ON() check in pppoe_pernet
tcp: Protect accesses to .ts_recent_stamp with {READ,WRITE}_ONCE()
tcp: tighten acceptance of ACKs not matching a child socket
tcp: fix rejected syncookies due to stale timestamps
lpc_eth: kernel BUG on remove
tcp: md5: fix potential overestimation of TCP option space
net: sched: allow indirect blocks to bind to clsact in TC
net: core: rename indirect block ingress cb function
net-sysfs: Call dev_hold always in netdev_queue_add_kobject
net: dsa: fix flow dissection on Tx path
net/tls: Fix return values to avoid ENOTSUPP
net: avoid an indirect call in ____sys_recvmsg()
...
|
|
Pull more SCSI updates from James Bottomley:
"Eleven patches, all in drivers (no core changes) that are either minor
cleanups or small fixes.
They were late arriving, but still safe for -rc1"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: MAINTAINERS: Add the linux-scsi mailing list to the ISCSI entry
scsi: megaraid_sas: Make poll_aen_lock static
scsi: sd_zbc: Improve report zones error printout
scsi: qla2xxx: Fix qla2x00_request_irqs() for MSI
scsi: qla2xxx: unregister ports after GPN_FT failure
scsi: qla2xxx: fix rports not being mark as lost in sync fabric scan
scsi: pm80xx: Remove unused include of linux/version.h
scsi: pm80xx: fix logic to break out of loop when register value is 2 or 3
scsi: scsi_transport_sas: Fix memory leak when removing devices
scsi: lpfc: size cpu map by last cpu id set
scsi: ibmvscsi_tgt: Remove unneeded variable rc
|
|
Pull cifs fixes from Steve French:
"Nine cifs/smb3 fixes:
- one fix for stable (oops during oplock break)
- two timestamp fixes including important one for updating mtime at
close to avoid stale metadata caching issue on dirty files (also
improves perf by using SMB2_CLOSE_FLAG_POSTQUERY_ATTRIB over the
wire)
- two fixes for "modefromsid" mount option for file create (now
allows mode bits to be set more atomically and accurately on create
by adding "sd_context" on create when modefromsid specified on
mount)
- two fixes for multichannel found in testing this week against
different servers
- two small cleanup patches"
* tag '5.5-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb3: improve check for when we send the security descriptor context on create
smb3: fix mode passed in on create for modetosid mount option
cifs: fix possible uninitialized access and race on iface_list
cifs: Fix lookup of SMB connections on multichannel
smb3: query attributes on file close
smb3: remove unused flag passed into close functions
cifs: remove redundant assignment to pointer pneg_ctxt
fs: cifs: Fix atime update check vs mtime
CIFS: Fix NULL-pointer dereference in smb2_push_mandatory_locks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs cleanups from Al Viro:
"No common topic, just three cleanups".
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
make __d_alloc() static
fs/namespace: add __user to open_tree and move_mount syscalls
fs/fnctl: fix missing __user in fcntl_rw_hint()
|
|
Pull NTB update from Jon Mason:
"Just a simple patch to add a new Hygon Device ID to the AMD NTB device
driver"
* tag 'ntb-5.5' of git://github.com/jonmason/ntb:
NTB: Add Hygon Device ID
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull more input updates from Dmitry Torokhov:
- fixups for Synaptics RMI4 driver
- a quirk for Goodinx touchscreen on Teclast tablet
- a new keycode definition for activating privacy screen feature found
on a few "enterprise" laptops
- updates to snvs_pwrkey driver
- polling uinput device for writing (which is always allowed) now works
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: synaptics-rmi4 - don't increment rmiaddr for SMBus transfers
Input: synaptics-rmi4 - re-enable IRQs in f34v7_do_reflash
Input: goodix - add upside-down quirk for Teclast X89 tablet
Input: add privacy screen toggle keycode
Input: uinput - fix returning EPOLLOUT from uinput_poll
Input: snvs_pwrkey - remove gratuitous NULL initializers
Input: snvs_pwrkey - send key events for i.MX6 S, DL and Q
|
|
Pull iomap fixes from Darrick Wong:
"Fix a race condition and a use-after-free error:
- Fix a UAF when reporting writeback errors
- Fix a race condition when handling page uptodate on fragmented file
with blocksize < pagesize"
* tag 'iomap-5.5-merge-14' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: stop using ioend after it's been freed in iomap_finish_ioend()
iomap: fix sub-page uptodate handling
|