| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
Radxa Rock 3C board. More gpu+usb enablement on rk3588 boards as well
as two new iommus on rk3588.
* tag 'v6.10-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: add rk3588 pcie and php IOMMUs
arm64: dts: rockchip: enable onboard spi flash for rock-3a
arm64: dts: rockchip: add USB-C support to rk3588s-orangepi-5
arm64: dts: rockchip: Enable GPU on Orange Pi 5
arm64: dts: rockchip: enable GPU on khadas-edge2
arm64: dts: rockchip: Add USB3 on Edgeble NCM6A-IO board
arm64: dts: rockchip: Support poweroff on Edgeble Neural Compute Module
arm64: dts: rockchip: Add Radxa ROCK 3C
dt-bindings: arm: rockchip: add Radxa ROCK 3C
Link: https://lore.kernel.org/r/13810480.dW097sEU6C@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The Radxa ROCK 3C is a similar board to the
Radxa ROCK 3A with the Rockchip RK3566 SoC.
Add devicetree binding documentation for it.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240428123618.72170-2-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
Keystone2 device tree updates for v6.10
Generic Cleanups/Fixes:
- Remove custom ti,system-reboot-controller property
* tag 'ti-keystone-dt-for-v6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
dt-bindings: arm: keystone: Remove ti,system-reboot-controller property
ARM: dts: ti: keystone: k2g: Remove ti,system-reboot-controller property
Link: https://lore.kernel.org/r/20240501124309.3cj5b3gjf3cpimut@outsell
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 6.10, please pull the following:
- Laurent converts the Raspberry Pi firmware DT binding to YAML, updates
the firmware driver to use the proper 'struct device' reference for
DMA mappings and drops unneeded properties from the DT node and
finishes by removing the duplicate firmware-clocks property to
bcm2835-rpi.dtsi. He also added support for the CAM1 camera interface
regulator.
- Uwe adds a pinctrl-based multiplexing description to allow the use of
I2C0 pins to allow usage between the 40-pin Raspberry Pi header and
the CSI and DSI connectors. He then describes the PCF85063 RTC device
available on the CM4 I/O board making use of that pinctrl-based
muxing.
- Arinc updates the Asus RT-AC3100 and RT-AC88U DTs to have proper LED
colors and function properties, NVMEM MAC addresses and removes
duplicates and unnecessary properties and does a few Device Tree
cleanups.. He then adds support for the Asus RT-AC3200 (BCM4709-based)
and RT-AC3500 routers.
- Jean-Michel adds DT nodes for the CSI Unicam camera interfaces on the
Raspberry Pi 4 / BCM2711 SoCs
- Florian adds support for the Ethernet LEDs on Raspberry Pi 4 B and
Raspberry Pi 4 CM boards.
* tag 'arm-soc/for-6.10/devicetree' of https://github.com/Broadcom/stblinux:
arm: dts: bcm2711: Describe Ethernet LEDs
ARM: dts: BCM5301X: Conform to DTS Coding Style on ASUS RT-AC3100 & AC88U
ARM: dts: BCM5301X: Add DT for ASUS RT-AC5300
ARM: dts: BCM5301X: Add DT for ASUS RT-AC3200
dt-bindings: arm: bcm: add bindings for ASUS RT-AC5300
dt-bindings: arm: bcm: add bindings for ASUS RT-AC3200
ARM: dts: bcm2835: Add Unicam CSI nodes
ARM: dts: BCM5301X: remove earlycon on ASUS RT-AC3100 and ASUS RT-AC88U
ARM: dts: BCM5301X: remove duplicate compatible on ASUS RT-AC3100 & AC88U
ARM: dts: BCM5301X: provide address for SoC MACs on ASUS RT-AC3100 & AC88U
ARM: dts: BCM5301X: use color and function on ASUS RT-AC3100 and RT-AC88U
ARM: dts: bcm2711-rpi-4-b: Add CAM1 regulator
ARM: dts: bcm2711-rpi-cm4-io: Add RTC on I2C0
ARM: dts: bcm2711-rpi: Add pinctrl-based multiplexing for I2C0
ARM: dts: bcm2835-rpi: Move duplicate firmware-clocks to bcm2835-rpi.dtsi
ARM: dts: bcm283x: Drop unneeded properties in the bcm2835-firmware node
firmware: raspberrypi: Use correct device for DMA mappings
dt-bindings: arm: bcm: raspberrypi,bcm2835-firmware: Add gpio child node
Link: https://lore.kernel.org/r/20240429213703.2327834-2-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX DT bindings for 6.10:
- Add vendor prefix for Emcraft Systems
- Add compatible for new boards: Emcraft Systems i.MX8M Plus NavQ+ Kit,
Colibri iMX8DX, Seeed studio NPi base board, NXP S32G3 board
- Drop reduntant toradex,colibri-imx8x from fsl.yaml
- Add usbmisc compatible for i.MX8ULP
* tag 'imx-bindings-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: usb: usbmisc-imx: add fsl,imx8ulp-usbmisc compatible
dt-bindings: arm: fsl: Add Colibri iMX8DX
dt-bindings: arm: fsl: remove reduntant toradex,colibri-imx8x
dt-bindings: arm: Add Emcraft Systems i.MX8M Plus NavQ+ Kit
dt-bindings: vendor-prefixes: Add Emcraft Systems
dt-bindings: arm: fsl: add NXP S32G3 board
dt-bindings: arm: fsl: Add Seeed studio NPi based boards
Link: https://lore.kernel.org/r/20240428121247.10370-2-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree updates for v6.10
Support for Sony Xperia 1V, on the SM8550 platform, is added.
On IPQ8074, UART6 is described and unused gpios from QPIC are removed.
Backlight and touchscreen are described on Samsung Grand Prime devices.
RGB LED is added to Sony Xperia "Yoshino" devices, on which the
volume-up key definition is corrected as well.
Light Pulse Generator node is added to PM6150L PMIC, and blocks related
to USB Type-C on PM6150 are added.
On QCS6490 Rb3Gen2 UFS storage, USB Type-C management, a couple of
remoteprocs and both USB Type-C and native DisplayPort are enabled.
For the related IDP display is enabled, and the PMIC volume and power
buttons are described.
The inline crypto engine is added for SC7280, and an additional turbo
frequency is added to the MDP.
USB Type-C port management is introduce for the QRB2210 RB1. WiFi
firmware-name qualifier is added to both RB1 and RB2 boards.
The LMH node is added for the QCM2290, to configure the thresholds as
well as provide thermal pressure input.
The regulator range is adjusted for SD-card IO on SA8155P ADP, to allow
UHS modes.
The unused DCC is disabled on SC7180, and unused PMIC gpio block is
disabled on Trogdor.
For Lenovo Flex 5G, on SC8180X, the GPU firmware path is aligned with
agreed upon firmware structure. The frequency of the I2C bus for
touchpad is brought up to mitigate missing events. A number of
additional cleanups are introduced.
For SC8280XP GICv3 ITS is wired up for PCIe. EAS properties ad
introduced. A PS_HOLD-based restart node is introduced and acts as a
fallback if other mechanisms are unavailable to restart the board.
QFPROM is described, missing LMH interrupts for thermal pressure are
added. The TCSR download mode register is added, to allow configuring
if download mode should be entered on a crash.
USB Type-C handling is introduce for Fairphone FP3 as well.
On SM6350 crypto engine and DisplayPort controllers are introduced.
WiFi is enabled on the SM8150 Hardware Development Kit (HDK)
USB PD properties are added on Xiaomi Mi Pad 5 Pro devices.
Interconnect paths are added for UFS on SM8350, to ensure the bus is
voted for when the controller is operating.
On SM8550 the DMA coherency properties are corrected for SMMU and a few
consumers. Missing DWC3 quirks are added and the SNPS PHY parameters are
adjusted. Fastrpc banks are marked non-secure as needed.
The GPU description is introduced on SM8650, and enabled on the QRD. A
missing reserved-memory node is added, as is a few missing fastrpc
compute banks, and the non-secure-domain flag for other banks.
On X1 Elite SPMI support is added, together with PMIC definitons. The
link properties for DP3 are corrected, and audio-related resets are
introduced. SoundWire properties are corrected.
Nodes describing the PCIe bridge under the host controller is added
for a bunch of platforms.
The GPIO carrying orientation information for USB Type-C is added across
Fairphone 5, Lenovo Flex 5G, Lenovo Thinkpad X13s, SM8350 and SM845
HDKs.
A few dtbTool-specific compatibles for msm8916 is dropped from the
bindings.
A number of DeviceTree binding validation issues are corrected.
* tag 'qcom-arm64-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (110 commits)
dt-bindings: arm: qcom: Add Samsung Galaxy S5 China (kltechn)
arm64: dts: qcom: qrb4210-rb1: add firmware-name qualifier to WiFi node
arm64: dts: qcom: qrb2210-rb1: add firmware-name qualifier to WiFi node
arm64: dts: qcom: ipq6018: Add PCIe bridge node
arm64: dts: qcom: ipq8074: Add PCIe bridge node
arm64: dts: qcom: msm8996: Add PCIe bridge node
arm64: dts: qcom: sc8180x: Add PCIe bridge node
arm64: dts: qcom: qcs404: Add PCIe bridge node
arm64: dts: qcom: sc7280: Add PCIe bridge node
arm64: dts: qcom: msm8998: Add PCIe bridge node
arm64: dts: qcom: sc8280xp: Add PCIe bridge node
arm64: dts: qcom: sa8775p: Add PCIe bridge node
arm64: dts: qcom: sm8650: Add PCIe bridge node
arm64: dts: qcom: sm8550: Add PCIe bridge node
arm64: dts: qcom: sm8450: Add PCIe bridge node
arm64: dts: qcom: sm8350: Add PCIe bridge node
arm64: dts: qcom: sm8150: Add PCIe bridge node
arm64: dts: qcom: sdm845: Add PCIe bridge node
arm64: dts: qcom: sm8250: Add PCIe bridge node
arm64: dts: qcom: sdm845-db845c: make pcie0_3p3v_dual always-on
...
Link: https://lore.kernel.org/r/20240427175951.1439887-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm32 DeviceTree updates for v6.10
The QCA8074 PHY package found in IPQ4019 is properly described.
The Sony Xperia Z2 Tablet is cleaned up and improved, vibrator support
is added, upon support for Sony Xperia Z3 is added.
Also based on MSM8974, support for Samsung Galaxy S5 China is introduced.
The WiFi board type is added for these "klte" Samsung devices, to select
appropriate NVRAM firmware file.
Based on MSM8226, support for Motorola Moto G (2013) is added.
Nodes representing the PCIe bridges under existing controllers are added
for APQ8064, IPQ4019, IPQ8064, and SDX55.
A number of fixes throughout to improve compliance with DeviceTree
bindings.
* tag 'qcom-arm32-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (22 commits)
ARM: dts: qcom: msm8974: Add DTS for Samsung Galaxy S5 China (kltechn)
ARM: dts: qcom: msm8974-klte-common: Pin WiFi board type
ARM: dts: qcom: msm8974: Split out common part of samsung-klte
ARM: dts: qcom: sdx55: Add PCIe bridge node
ARM: dts: qcom: apq8064: Add PCIe bridge node
ARM: dts: qcom: ipq4019: Add PCIe bridge node
ARM: dts: qcom: ipq8064: Add PCIe bridge node
ARM: dts: qcom: msm8974-sony-shinano: Enable vibrator
ARM: dts: qcom: ipq4019: add QCA8075 PHY Package nodes
ARM: dts: qcom: Add support for Motorola Moto G (2013)
dt-bindings: arm: qcom: Add Motorola Moto G (2013)
ARM: dts: qcom: msm8974: Add empty chosen node
ARM: dts: qcom: msm8974: Add @0 to memory node name
ARM: dts: qcom: Add Sony Xperia Z3 smartphone
ARM: dts: qcom: msm8974-sony-castor: Split into shinano-common
ARM: dts: qcom: msm8916: idle-state compatible require the generic idle-state
ARM: dts: qcom: include cpu in idle-state node names
ARM: dts: qcom: msm8974pro-castor: Rename wifi node name
ARM: dts: qcom: msm8974pro-castor: Add debounce-interval for keys
ARM: dts: qcom: msm8974pro-castor: Remove camera button definitions
...
Link: https://lore.kernel.org/r/20240427163625.1432458-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
- new boards: RG35XX 2024, RG35XX-Plus, RG35XX-H
* tag 'sunxi-dt-for-6.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h700: Add RG35XX-H DTS
arm64: dts: allwinner: h700: Add RG35XX-Plus DTS
arm64: dts: allwinner: h700: Add RG35XX 2024 DTS
dt-bindings: arm: sunxi: document Anbernic RG35XX handheld gaming device variants
Link: https://lore.kernel.org/r/20240427133006.GA146501@jernej-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
- added multicolor LED node for pinephone
- marked pinephone LEDs to retain status in suspend
- DT cleanups & fixes
- fixed A64 GPU frequency at 432 MHz
- added H616 NMI node
- new boards: PocketBook 614 Plus, Tanix TX1
* tag 'sunxi-dt-for-6.10-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h616: Add NMI device node
arm64: dts: allwinner: Add Tanix TX1 support
dt-bindings: arm: sunxi: document Tanix TX1 name
ARM: dts: sun5i: Add PocketBook 614 Plus support
dt-bindings: arm: sunxi: Add PocketBook 614 Plus
arm64: dts: allwinner: h616: Fix I2C0 pins
arm64: dts: allwinner: a64: Run GPU at 432 MHz
arm: dts: allwinner: drop underscore in node names
arm64: dts: allwinner: Orange Pi: delete node by phandle
arm64: dts: allwinner: drop underscore in node names
arm64: dts: allwinner: Pine H64: correctly remove reg_gmac_3v3
arm64: dts: allwinner: pinephone: add multicolor LED node
arm64: dts: allwinner: pinephone: Retain LEDs state in suspend
Link: https://lore.kernel.org/r/20240426164510.GA101219@jernej-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
variants
RG35XX 2024: Base version with Allwinner H700
RG35XX Plus: Adds Wifi/BT
RG35XX H: Adds second USB port and analog sticks to -Plus in horizontal form factor
Use three separate device descriptions rather than enum as per existing sunxi binding style.
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240427110225.727472-4-ryan@testtoast.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
|
Add ASUS RT-AC5300 under BCM47094 based boards.
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240423-for-soc-asus-rt-ac3200-ac5300-v3-2-23d33cfafe7a@arinc9.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
Add ASUS RT-AC3200 under BCM4709 based boards.
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240423-for-soc-asus-rt-ac3200-ac5300-v3-1-23d33cfafe7a@arinc9.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
Correct the descriptions of a few Pine64 boards and devices, according
to their official names used on the Pine64 wiki. This ensures consistency
between the officially used names and the names in the source code.
Cc: Marek Kraus <gamiee@pine64.org>
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/ec124dab2b1a8776aa39177ecce34babca3a50e2.1713832790.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add devicetree binding for ArmSoM Sige7 board
Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Weizhao Ouyang <weizhao.ouyang@arm.com>
Link: https://lore.kernel.org/r/20240420034300.176920-3-liujianfeng1994@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
According to https://radxa.com/products/rock3/3a,
the name of this board should be "Radxa ROCK 3A".
Suggested-by: FUKAUMI Naoki <naoki@radxa.com>
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240419103019.992586-2-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Correct the descriptions of a few Radxa boards, according to the up-to-date
documentation from Radxa and the detailed explanation from Naoki. [1] To sum
it up, the short naming, as specified by Radxa, is preferred.
[1] https://lore.kernel.org/linux-rockchip/B26C732A4DCEA9B3+282b8775-601b-4d4a-a513-4924b7940076@radxa.com/
Suggested-by: FUKAUMI Naoki <naoki@radxa.com>
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/1e148d6cd4486b31b5e7f3824cf6bccf536b74c0.1713457260.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Document Samsung Galaxy S5 China (kltechn) as a klte variant based on
msm8974pro. Also including "samsung,klte" in the compatible chain as
kltechn works fine with the klte DTB except for LEDs and WiFi missing.
Signed-off-by: Rong Zhang <i@rong.moe>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240213110137.122737-4-i@rong.moe
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add support for Toradex Colibri iMX8DX SoM. As the i.MX8QXP variant is
already supported, update the description with i.MX8DX and add
'fsl,imx8dx' item as well.
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
'toradex,colibri-imx8x' is already present as a constant value for
'i.MX8QP Board with Toradex Colibri iMX8X Modules', so there is no need
to keep it twice as a enum value for 'i.MX8QXP based Boards'.
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The Tanix TX1 is a tiny TV box with the Allwinner H313 SoC, a lower bin
version of the Allwinner H616. It comes with no SD card slot or Ethernet
port.
Add the board/SoC compatible string pair to the list of known boards.
Since the H313 does not look different from a software point of view,
we keep the H616 compatible string.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240418104942.1556914-2-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
|
Document the SM8550 SONY Xperia 1 V (PDX234) board.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240210-topic-1v-v1-2-fda0db38e29b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add a new board name.
Signed-off-by: Denis Burkov <hitechshell@mail.ru>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240415173416.13838-1-hitechshell@mail.ru
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
|
The GameForce Chi is a handheld gaming device from GameForce powered
by the Rockchip RK3326 SoC.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240325134959.11807-5-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
FET3588-C is an System on Module made by Forlinx based on Rockchip RK3588.
This SoM used by OK3588-C Board.
FET3588-C features:
- Rockchip RK3588
- LPDDR4 4/8 GB
- eMMC 32/64 GB
Add devicetree binding for Forlinx FET3588-C SoM.
Signed-off-by: Dmitry Yashin <dmt.yashin@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240403151229.30577-2-dmt.yashin@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
MECSBC is a single board computer for blood analysis machines from
RR-Mechatronics, designed and manufactured by Protonic Holland, based on
the Rockchip RK3568 SoC.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20240405-protonic-mecsbc-v2-1-0a6fedc78b9f@pengutronix.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
This property was only ever used in one device. It is no longer needed as
what it signaled is now default. Remove this unneeded/unused property.
Signed-off-by: Andrew Davis <afd@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240326223730.54639-5-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Document the Motorola Moto G (2013), which is a smartphone based
on the Qualcomm MSM8226 SoC.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Link: https://lore.kernel.org/r/32c507337ab80c550fb1df08f7014d1e31eb4c32.1712480582.git.stano.jakubek@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Unlike the other child nodes of the raspberrypi,bcm2835-firmware device,
the gpio child is documented in a legacy text-based binding in
gpio/raspberrypi,firmware-gpio.txt. This causes DT validation failures:
arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dtb: 'gpio' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/arm/bcm/raspberrypi,bcm2835-firmware.yaml#
Convert the binding to YAML and move it to
raspberrypi,bcm2835-firmware.yaml.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Tested-by: Ivan T. Ivanov <iivanov@suse.de>
Link: https://lore.kernel.org/r/20240326195807.15163-2-laurent.pinchart@ideasonboard.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
Add the compatible for this Sony smartphone.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20240314-shinano-common-v2-2-a0fce1c72c74@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Drop two board compatibles that were used by the skales dtbTool to index
device tree blobs. It was required to boot those devices with the
original bootloader, however all users should have switched to the
lk2nd bootloader by now.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240314-msm8916-drop-compats-v2-1-5a4b40f832d3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add DT compatible string for Emcraft NavQ+ kit based on
the i.MX8M Plus SoC from NXP
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add bindings for NXP S32G3 Reference Design Board 3 (S32G-VNP-RDB3) [1]
[1]
https://www.nxp.com/design/design-center/designs/s32g3-vehicle-networking-reference-design:S32G-VNP-RDB3
Signed-off-by: Wadim Mueller <wafgo01@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
NPi i.MX6ULL eMMC/NAND is Seed Studios SoM using i.MX6ULL.
Development baords can be either based on NAND or eMMC
SoM.
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add the WolfVision PF5 mainboard, which serves as base for recent
WolfVision products. It features the Rockchip RK3568 SoC and can
be extended with several different extension boards.
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240325-feature-wolfvision-pf5-v1-2-5725445f792a@wolfvision.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and a number of other driver
subsystem updates for 6.9-rc1. Included in here are:
- IIO driver updates, loads of new ones and evolution of existing ones
- coresight driver updates
- const cleanups for many driver subsystems
- speakup driver additions
- platform remove callback void cleanups
- mei driver updates
- mhi driver updates
- cdx driver updates for MSI interrupt handling
- nvmem driver updates
- other smaller driver updates and cleanups, full details in the
shortlog
All of these have been in linux-next for a long time with no reported
issue, other than a build warning for the speakup driver"
The build warning hits clang and is a gcc (and C23) extension, and is
fixed up in the merge.
Link: https://lore.kernel.org/all/20240321134831.GA2762840@dev-arch.thelio-3990X/
* tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (279 commits)
binder: remove redundant variable page_addr
uio_dmem_genirq: UIO_MEM_DMA_COHERENT conversion
uio_pruss: UIO_MEM_DMA_COHERENT conversion
cnic,bnx2,bnx2x: use UIO_MEM_DMA_COHERENT
uio: introduce UIO_MEM_DMA_COHERENT type
cdx: add MSI support for CDX bus
pps: use cflags-y instead of EXTRA_CFLAGS
speakup: Add /dev/synthu device
speakup: Fix 8bit characters from direct synth
parport: sunbpp: Convert to platform remove callback returning void
parport: amiga: Convert to platform remove callback returning void
char: xillybus: Convert to platform remove callback returning void
vmw_balloon: change maintainership
MAINTAINERS: change the maintainer for hpilo driver
char: xilinx_hwicap: Fix NULL vs IS_ERR() bug
hpet: remove hpets::hp_clocksource
platform: goldfish: move the separate 'default' propery for CONFIG_GOLDFISH
char: xilinx_hwicap: drop casting to void in dev_set_drvdata
greybus: move is_gb_* functions out of greybus.h
greybus: Remove usage of the deprecated ida_simple_xx() API
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add cleanup.h based auto release of struct device_node pointers via
__free marking and new for_each_child_of_node_scoped() iterator to
use it.
- Always create a base skeleton DT when CONFIG_OF is enabled. This
supports several usecases of adding DT data on non-DT booted
systems.
- Move around some /reserved-memory code in preparation for further
improvements
- Add a stub for_each_property_of_node() for !OF
- Adjust the printk levels on some messages
- Fix __be32 sparse warning
- Drop RESERVEDMEM_OF_DECLARE usage from Freescale qbman driver
(currently orphaned)
- Add Saravana Kannan and drop Frank Rowand as DT maintainers
DT bindings:
- Convert Mediatek timer, Mediatek sysirq, fsl,imx6ul-tsc,
fsl,imx6ul-pinctrl, Atmel AIC, Atmel HLCDC, FPGA region, and
xlnx,sd-fec to DT schemas
- Add existing, but undocumented fsl,imx-anatop binding
- Add bunch of undocumented vendor prefixes used in compatible
strings
- Drop obsolete brcm,bcm2835-pm-wdt binding
- Drop obsolete i2c.txt which as been replaced with schema in
dtschema
- Add DPS310 device and sort trivial-devices.yaml
- Enable undocumented compatible checks on DT binding examples
- More QCom maintainer fixes/updates
- Updates to writing-schema.rst and DT submitting-patches.rst to
cover some frequent review comments
- Clean-up SPDX tags to use 'OR' rather than 'or'"
* tag 'devicetree-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (56 commits)
dt-bindings: soc: imx: fsl,imx-anatop: add imx6q regulators
of: unittest: Use for_each_child_of_node_scoped()
of: Introduce for_each_*_child_of_node_scoped() to automate of_node_put() handling
of: Add cleanup.h based auto release via __free(device_node) markings
of: Move all FDT reserved-memory handling into of_reserved_mem.c
of: Add KUnit test to confirm DTB is loaded
of: unittest: treat missing of_root as error instead of fixing up
x86/of: Unconditionally call unflatten_and_copy_device_tree()
um: Unconditionally call unflatten_device_tree()
of: Create of_root if no dtb provided by firmware
of: Always unflatten in unflatten_and_copy_device_tree()
dt-bindings: timer: mediatek: Convert to json-schema
dt-bindings: interrupt-controller: fsl,intmux: Include power-domains support
soc: fsl: qbman: Remove RESERVEDMEM_OF_DECLARE usage
dt-bindings: fsl-imx-sdma: fix HDMI audio index
dt-bindings: soc: imx: fsl,imx-iomuxc-gpr: add imx6
dt-bindings: soc: imx: fsl,imx-anatop: add binding
dt-bindings: input: touchscreen: fsl,imx6ul-tsc convert to YAML
dt-bindings: pinctrl: fsl,imx6ul-pinctrl: convert to YAML
of: make for_each_property_of_node() available to to !OF
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Not a ton of stuff happening in the clk framework. We got some more
devm helpers and we seem to be going in the direction of "just turn
this stuff on already and leave me alone!" with the addition of a
devm_clk_bulk_get_all_enable() API. I'm hoping that we can make that
into a pmdomain that drivers attach instead, but this API should help
drivers simplify in the meantime.
Outside of the devm wrappers, we've got the usual clk driver updates
that are dominated by the major phone SoC vendors (Samsung and
Qualcomm) and the non-critical driver fixes for things like incorrect
topology descriptions and wrong registers or bit fields. More details
are below, but I'd say that it looks pretty ordinary. The only thing
that really jumps out at me is the Renesas clk driver that's ignoring
clks that are assigned to remote processors in DeviceTree. That's a
new feature that they're using to avoid marking clks as
CLK_IGNORE_UNUSED based on the configuration of the system.
Core:
- Increase dev_id len for clkdev lookups
- Add a devm_clk_bulk_get_all_enable() API to get and enable all clks
for a device
- Add a devm variant of clk_rate_exclusive_get()
New Drivers:
- Display, TCSR, GPU, and Camera clock controllers for Qualcomm's X1
Elite SoC
- Google GS101 PERIC0 and PERIC1 clock controllers
- Exynos850 PDMA clocks
- Exynos850 CPU cluster 0 and 1 (CMU_CPUCLK0/CMU_CPUCLK1) clock
controllers
Removed Drivers:
- Remove the unused Qualcomm sc7180 modem clk driver
Updates:
- Fix some static checker errors in the Hisilicon clk driver
- Polarfire MSSPLL hardware has 4 output clocks (the driver supported
previously only one output); each of these 4 outputs feed dividers
and the output of each divider feed individual hardware blocks
(e.g. CAN, Crypto, eMMC); individual hardware block drivers need to
control their clocks thus clock driver support was added for all
MSSPLL output clocks
- Typo fixes in the Qualcomm IPQ5018 GCC driver
- Add "qdss_at" clk on Qualcomm IPQ6018, needed for WiFi
- Properly terminate frequency tables in different Qualcomm clk
drivers
- Add MDSS, crypto, and SDCC resets on Qualcomm MSM8953
- Add missing UFS CLKREF clks on Qualcomm SC8180X
- Avoid significant delays during boot by adding a softdep on rpmhpd
to Qualcomm SDM845 gcc driver
- Add QUPv3 RCGS w/ DFS and video resets to Qualcomm SM8150 GCC
driver
- Fix the custom GPU GX "do-nothing" method in the Qualcomm GDSC
driver
- Add an external regulator to GX GDSC on Qualcomm SC8280XP GPU clk
driver
- Switch display, GPU, video, and camera Qualcomm clk drivers to
module_platform_driver()
- Set a longer delay for Venus resets on many Qualcomm SoCs
- Correct the GDSC wait times in the Qualcomm SDM845 display clk
driver
- Fix clock listing Oops on Amlogic axg
- New pll-rate for Rockchip rk3568
- i2s rate improvements for Rockchip rk3399
- Rockchip rk3588 syscon clock fixes and removal of overall
clock-number from the rk3588 binding header
- A prerequisite for later improvements to the Rockchip rk3588 linked
clocks
- Minor clean-ups and error handling improvements in both
composite-8m and SCU i.MX clock drivers
- Fix for SAI_MCLK_SEL definition for i.MX8MP
- Register the Samsung CMU MISC clock controller earlier, so the
Multi Core Timer clocksource can use it on Google GS101
- Propagate Exynos850 SPI IPCLK rate change to parents, so the SPI
will get proper clock rates
- Refactor the generic Samsung CPU clock controllers code, preparing
it for supporting Exynos850 CPU clocks
- Fix some clk kerneldoc warnings
- Add Ethernet, SDHI, DMA, and HyperFLASH/QSPI (RPC-IF) clocks on
Renesas R-Car V4M
- Ignore all clocks which are assigned to a non-Linux system in the
Renesas clk driver
- Add watchdog clock on Renesas RZ/G3S
- Add camera (CRU) clock and reset on Renesas RZ/G2UL
- Add support for the Renesas R-Car V4M (R8A779H0) SoC
- Convert some clk bindings to YAML so they can be validated"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits)
clk: zynq: Prevent null pointer dereference caused by kmalloc failure
clk: fractional-divider: Use bit operations consistently
clk: fractional-divider: Move mask calculations out of lock
clk: Fix clk_core_get NULL dereference
clk: starfive: jh7110-vout: Convert to platform remove callback returning void
clk: starfive: jh7110-isp: Convert to platform remove callback returning void
clk: imx: imx8-acm: Convert to platform remove callback returning void
clk: qcom: gcc-ipq5018: fix register offset for GCC_UBI0_AXI_ARES reset
clk: qcom: gcc-ipq5018: fix 'halt_reg' offset of 'gcc_pcie1_pipe_clk'
clk: qcom: gcc-ipq5018: fix 'enable_reg' offset of 'gcc_gmac0_sys_clk'
clk: qcom: camcc-x1e80100: Fix missing DT_IFACE enum in x1e80100 camcc
clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays
clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays
clk: qcom: camcc-sc8280xp: fix terminating of frequency table arrays
clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays
clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays
clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays
clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays
clk: mediatek: clk-mt8173-apmixedsys: Use common error handling code in clk_mt8173_apmixed_probe()
clk: Add a devm variant of clk_rate_exclusive_get()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"This is the usual mix of updates for drivers that are used on (mostly
ARM) SoCs with no other top-level subsystem tree, including:
- The SCMI firmware subsystem gains support for version 3.2 of the
specification and updates to the notification code
- Feature updates for Tegra and Qualcomm platforms for added hardware
support
- A number of platforms get soc_device additions for identifying
newly added chips from Renesas, Qualcomm, Mediatek and Google
- Trivial improvements for firmware and memory drivers amongst
others, in particular 'const' annotations throughout multiple
subsystems"
* tag 'soc-drivers-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
tee: make tee_bus_type const
soc: qcom: aoss: add missing kerneldoc for qmp members
soc: qcom: geni-se: drop unused kerneldoc struct geni_wrapper param
soc: qcom: spm: fix building with CONFIG_REGULATOR=n
bus: ti-sysc: constify the struct device_type usage
memory: stm32-fmc2-ebi: keep power domain on
memory: stm32-fmc2-ebi: add MP25 RIF support
memory: stm32-fmc2-ebi: add MP25 support
memory: stm32-fmc2-ebi: check regmap_read return value
dt-bindings: memory-controller: st,stm32: add MP25 support
dt-bindings: bus: imx-weim: convert to YAML
watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs
soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
MAINTAINERS: Update SCMI entry with HWMON driver
MAINTAINERS: samsung: gs101: match patches touching Google Tensor SoC
memory: tegra: Fix indentation
memory: tegra: Add BPMP and ICC info for DLA clients
memory: tegra: Correct DLA client names
dt-bindings: memory: renesas,rpc-if: Document R-Car V4M support
firmware: arm_scmi: Update the supported clock protocol version
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
Initial support for the rk3568 Qnap TS433 NAS, the rk3588-based Tiger SoM
from Theobroma-Systems and the rk3588-based Toybrick TB-RK3588X.
Some fixes to conform to dt-bindings for i2s (rk3588, rk356x) and
rk356x video-decoder (missing interrupt-names).
Correcting the vendor in the compatible for OrangePi RK3399 and BananaPi
R2 Pro (discussed with DT-maintainers beforehand of course).
The VO1-GRF syscon needs its clock to work, and that clock also needed to
be actually exported forst, so we're sharing a branch with the Rockchip
clock-tree (that already got merged into the main clock-tree for 6.9) for
this small shared code.
And as another step on the long road to graphics output on rk3588, 6.9 will
get the hdmi-phy via the phy-tree, so here the dts node is added.
* tag 'v6.9-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Fix name for UART pin header on qnap-ts433
arm64: dts: rockchip: Add basic support for QNAP TS-433
dt-bindings: arm: rockchip: Add QNAP TS-433
arm64: dts: rockchip: add Haikou baseboard with RK3588-Q7 SoM
arm64: dts: rockchip: add RK3588-Q7 (Tiger) SoM
dt-bindings: arm: rockchip: Add Theobroma-Systems RK3588 Q7 with baseboard
arm64: dts: rockchip: drop rockchip,trcm-sync-tx-only from rk3588 i2s
arm64: dts: rockchip: fix reset-names for rk356x i2s2 controller
arm64: dts: rockchip: add missing interrupt-names for rk356x vdpu
arm64: dts: rockchip: add clock to vo1-grf syscon on rk3588
dt-bindings: arm: rockchip: Add Toybrick TB-RK3588X
arm64: dts: rockchip: Add devicetree support for TB-RK3588X board
arm64: dts: rockchip: adjust vendor on orangepi rk3399 board
arm64: dts: rockchip: adjust vendor on Banana Pi R2 Pro board
dt-bindings: arm: rockchip: Correct vendor for Banana Pi R2 Pro
dt-bindings: arm: rockchip: Correct vendor for Orange Pi RK3399 board
arm64: dts: rockchip: Add HDMI0 PHY to rk3588
dt-bindings: clock: rk3588: add missing PCLK_VO1GRF
dt-bindings: clock: rk3588: drop CLK_NR_CLKS
clk: rockchip: rk3588: fix CLK_NR_CLKS usage
Link: https://lore.kernel.org/r/3695004.ElGaqSPkdT@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt
mvebu dt for 6.9 (part 1)
a38x: improve solidrun armada 388 clearfog GTR device support:
Initial device-tree merge for Clearfog GTR devices had issues causing
problems with sfp connectors. The fixes are:
- Converted armada-38x dt-bindings to yaml and replaced invalid
compatibles.
- Added pinctrl nodes for all referenced gpios and removed invalid io
from first sfp connector.
- Added descriptions for secondary sfp connector and updated labels
of dsa switch ports.
* tag 'mvebu-dt-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm: dts: marvell: clearfog-gtr-l8: align port numbers with enclosure
arm: dts: marvell: clearfog-gtr-l8: add support for second sfp connector
arm: dts: marvell: clearfog-gtr: add missing pinctrl for all used gpios
arm: dts: marvell: clearfog-gtr: sort pinctrl nodes alphabetically
arm: dts: marvell: clearfog-gtr: add board-specific compatible strings
arm: dts: marvell: clearfog: add pro variant compatible in legacy dts
dt-bindings: marvell: a38x: add solidrun armada 385 clearfog gtr boards
dt-bindings: marvell: a38x: add kobol helios-4 board
dt-bindings: marvell: a38x: add solidrun armada 388 clearfog boards
dt-bindings: marvell: a38x: convert soc compatibles to yaml
Link: https://lore.kernel.org/r/87cysehr9k.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Marvell Berlin SoCs (later Syna) bindings were marked as
work-in-progress / unstable in 2015 in commit f07b4e49d27e ("Documentation:
bindings: berlin: consider our dt bindings as unstable"). Almost nine
years is enough, so drop the "unstable" remark and expect usual ABI
rules.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240224084414.6264-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt
Amlogic ARM64 DT changes for v6.9:
- New Board:
- Freebox Pop Player (IPTV Set-To-Box from Free FRench internet provider)
- Add reset controller for Amlogic C3
- Set initial rate for the NPU on Amlogic G12 SoCs
- Set initial clocks for USB on Amlogic A1
- Initialize Amlogic AXG SoC capacitance
- Drop unstable remark on Amlogic Bindings
- Add all Amlogic maintainers/reviewers on Amlogic SoCs bindings
- Cleanups:
- T7 whitespaces
- Underscore in names
* tag 'amlogic-arm64-dt-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
dt-bindings: arm: amlogic: add Neil, Martin and Jerome as maintainers
dt-bindings: arm: amlogic: remove unstable remark
arm64: dts: amlogic: add fbx8am DT overlays
arm64: dts: amlogic: add fbx8am board
dt-bindings: arm: amlogic: add fbx8am binding
dt-bindings: vendor-prefixes: add freebox
arm64: dts: amlogic: replace underscores in node names
arm64: dts: amlogic: t7: minor whitespace cleanup
arm64: dts: amlogic: axg: initialize default SoC capacitance
arm64: dts: amlogic: axg: move cpu cooling-cells to common dtsi
arch: arm64: dts: meson: a1: add assigned-clocks for usb node
arm64: dts: amlogic: meson-g12-common: Set the rates of the clocks for the NPU
arm64: dts: amlogic: add reset controller for Amlogic C3 SoC
Link: https://lore.kernel.org/r/1937f5ef-5d76-4259-931d-523c0e2f0a91@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.9
New Features across family / New SoCs:
- J722s SoC and board support with OSPI NOR, CPSW ethernet
- Camera capture support on mulitple J7xx SoCs, AM68, AM69 and AM62P SoCs
- Wave5 Encoder/Decoder support for J721s2, J784s4 and AM62P
Generic Cleanups/Fixes:
- Stop spliting single mbox items
- Adds MIT license along with GPL-2.0 for all TI DTS files
- Moves PCIe EP nodes in overlays
- VTM Power domain fixups for J7xx SoCs
- Conversion of mmio mux users to reg-mux where possible
- Drops unnecessary UART pinmuxes on J7xx SoCs
- MMC TAP value updates for AM64/AM62A/AM62P for improved stability
- DSS register space updates for AM65/AM62/AM62A
SoC specific Fixes/Features:
J7200:
- Adds CAN support
- New compatible for J7200 to support IO wakeup
AM62A
- HDMI Display (DSS) support
- Move to simple-bus for main_conf node
- eMMC, additional MMC/SD instance support
AM62
- move to simple-bus for main_conf node
AM654
- IOT2050-SM board support
- IOT2050 DT refractoring.
AM64
- SolidRun AM642 HummingBoard-T support and its DT overlays
- ICSSG Ethernet support and associated peripherals
Board specific fixes/Features:
- Beagle Play MDIO and USB node fixes
- TPM support on k3-am642-phyboard-electra and verdin-am62-mallow
- Phycore-am64 ADC
- PCIe + USB2.0 SERDES and PCIe + USB3.0 SERDES card support
- USB1 support on verdin-am62
* tag 'ti-k3-dt-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (126 commits)
arm64: dts: ti: hummingboard-t: add overlays for m.2 pci-e and usb-3
arm64: dts: add description for solidrun am642 som and evaluation board
dt-bindings: arm: ti: Add bindings for SolidRun AM642 HummingBoard-T
arm64: dts: ti: k3-am62p: Add Wave5 Video Encoder/Decoder Node
arm64: dts: ti: k3-j721s2-main: Add Wave5 Video Encoder/Decoder Node
arm64: dts: ti: k3-j784s4: Add Wave5 Video Encoder/Decoder Node
arm64: dts: ti: k3-am69-sk: Add support for OSPI flash
arm64: dts: ti: k3-am69-sk: Enable CAN interfaces for AM69 SK board
arm64: dts: ti: Enable overlays for SK-AM62P
arm64: dts: ti: k3-am62p: Add nodes for CSI-RX
arm64: dts: ti: k3-am62p: Add DMASS1 for CSI
arm64: dts: ti: k3-am62p: Fix memory ranges for DMSS
arm64: dts: ti: k3-j722s-evm: Enable OSPI NOR support
arm64: dts: ti: k3-j722s-evm: Enable CPSW3G RGMII1
arm64: dts: ti: k3-j784s4-main: Fix mux-reg-masks in serdes_ln_ctrl
arm64: dts: ti: k3-j721e: Fix mux-reg-masks in hbmc_mux
arm64: dts: ti: Add common1 register space for AM62A SoC
arm64: dts: ti: Add common1 register space for AM62x SoC
arm64: dts: ti: Add common1 register space for AM65x SoC
arm64: dts: ti: k3-am642-evm: add overlay for ICSSG1 2nd port
...
Link: https://lore.kernel.org/r/e7e984db-47b9-404a-9471-5d2ed0effe1d@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
Microchip AT91 device tree updates for v6.9
It contains:
- use DMA for DBGU of at91sam9x5ek.dtsi and USART3 of
at91sam9g25-gardena-smart-gateway.dts
- the new SAMA7G54 Curiosity board
- cleanups
* tag 'at91-dt-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: sama7g5: add sama7g5 compatible
ARM: dts: microchip: sam9x60: align dmas to the opening '<'
ARM: dts: microchip: sama7g5: align dmas to the opening '<'
ARM: dts: microchip: sama7g54_curiosity: Add initial device tree of the board
ARM: dts: microchip: sama7g5: Add flexcom 10 node
dt-bindings: ARM: at91: Document Microchip SAMA7G54 Curiosity
ARM: dts: microchip: gardena-smart-gateway: Use DMA for USART3
ARM: dts: microchip: at91sam9x5ek: Use DMA for DBGU serial port
Link: https://lore.kernel.org/r/20240226183635.1964704-1-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX dt-bindings for 6.9:
- New compatibles for boards: TQMa8Xx, Sielaff i.MX6 Solo, Toradex Apalis
imx6q-eval-v1.2, VAR-SOM-MX93, phyBOARD-Segin-i.MX93, UNI-T UTi260B.
- Add vendor prefix for UNI-T.
* tag 'imx-bindings-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: add UNI-T UTi260B
dt-bindings: vendor-prefixes: add UNI-T
dt-bindings: arm: fsl: remove redundant company name
dt-bindings: arm: fsl: add imx8qm apalis eval v1.2 carrier board
dt-bindings: arm: fsl: Add toradex,apalis_imx6q-eval-v1.2 board
dt-bindings: arm: fsl: Add phyBOARD-Segin-i.MX93
dt-bindings: arm: fsl: Add Sielaff i.MX6 Solo board
dt-bindings: arm: fsl: Add VAR-SOM-MX93 with Symphony
dt-bindings: arm: add TQMa8Xx boards
Link: https://lore.kernel.org/r/20240226034147.233993-2-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM64 DeviceTree updates for v6.9
Four variants of Samsung Galaxy Core Prime and Grand Prime, built on
MSM8916, and the Hardware Development Kit (HDK) for SM8550, are
introduced.
On X Elite audio and compute remoteprocs, IPCC, PCIe, AOSS QMP, SMP2P,
TCSR, USB, display, audio, and soundwire support is introduced, and
enabled across the CRD and QCP devices.
For SM8650 PCIe controllers are moved to GIC-ITS and msi-map-mask is
defined. Missing qlink-logging reserved-memory region is added for the
modem remoteproc. FastRPC compute contexts are marked dma-coherent.
Audio, USB Type-C and PM8010 support is introduced across MTP and QRD
devices.
GPU cooling devices are hooked up across MSM8916, MSM8939, SC8180X,
SDM630, SDM845, SM6115, SM8150, SM8250, SM8350, and SM8550.
UFS PHY clocks are corrected across MSM8996, MSM8998, SC8180X, SC8280XP,
SDM845, SM6115, SM6125, SM8150, SM8250, SM8350, SM8550, and SM8650.
PCI MSI interrupts are wired up across SM8150, SM8250, SM8350, SM8450,
SM8550, SM8650, SC7280, and SC8180X
On IPQ6018 QUP5 I2C, tsens sand thermal zones are defined. The Inline
Crypto Engine (ICE) is enabled for IPQ9574.
On MSM8953 the GPU and its IOMMU is introduced, the reset for the
display subsystem is also wired up.
VLS CLAMP registers are specified for USB3 PHYs on MSM8998, QCM2290, and
SM6115.
USB Type-C port management is enabled on QRB4210 RB2.
On the SA8295P ADP the MAX20411 regulator powering the GPU rails is
introduced and the GPU is enabled. The first PCI instance on SA8540P
Ride is disabled for now, as a fix for the interrupt storm produced here
has not been presented.
On SA8775P the firmware memory map has changed and is updated. Safety
IRQ is added to the Ethernet controller.
On SC7180 UFS support is introduced and the cros-ec-spi is marked as
wakeup source.
For SC7280 capacity and DPC properties are added, cryptobam definition
is improved to work in more firmware environments, more Chrome-specific
properties are moved out from main dtsi, and cros-ec-spi is maked as a
wakeup source. Slimbus definition is added to the platform.
A missing reserved-memory range is added to Fairphone FP5, PMIC GLINK
and Venus are enabled. LEDs are introduced and voltage settings
corrected on the QCM6490 IDP, and RB3gen2 sees the same voltage changes
and GCC protected clocks are introduced to make the board boot properly.
RPMh sleep stats and a variety of cleanups and fixes are introduced for
SC8180X.
On SC8280XP the additional tsens instances are introduced. Camera
Subsystem and Camera Control Interface (CCI) are added. PMIC die-temp
vadc channels are introduced on the CRD, to allow ADC channels to be
tied to the shared PMIC temp-alarms, to actually report temperature.
On SDM630 USB QMP PHY support is introduced and enabled on the Inforce
IFC6560 board. On the various Sony Xperia XA2 variants WLED is enabled
and configured.
On SM6350 display subsystem interconnects and tsens-based thermal zones
are added. On SM7125 UFS support is added.
On Fairphone FP4, on SM7225, display and GPU are enabled, and firmware
paths are corrected.
SM8150 PCIe controller definitions are corrected.
As with SM8650, the SM8550 the fastrpc compute contexts are marked
dm-coherent, and PCIe controllers are moved to use GIC-ITS. The UFS
controller frequency definition is moved to the generic opp-table.
Touchscreen is enabled on the QRD device.
As usual, a variety of smaller cleanups and corrections to match
DeviceTree bindings and style guidelines are introduced across the
various files.
* tag 'qcom-arm64-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (176 commits)
arm64: dts: qcom: sm6115: fix USB PHY configuration
arm64: dts: sm8650: Add msi-map-mask for PCIe nodes
arm64: dts: qcom: replace underscores in node names
dt-bindings: arm: qcom: Add Samsung Galaxy Tab 4 10.1 LTE
arm64: dts: qcom: pm4125: define USB-C related blocks
arm64: dts: qcom: sa8540p-ride: disable pcie2a node
arm64: dts: qcom: sc7280: add slimbus DT node
arm64: dts: qcom: sc7280: Add capacity and DPC properties
arm64: dts: qcom: pmi632: Add PBS client and use in LPG node
arm64: dts: qcom: sm8550: Use GIC-ITS for PCIe0 and PCIe1
arm64: dts: qcom: sm8150: correct PCIe wake-gpios
arm64: dts: qcom: sdm845-db845c: correct PCIe wake-gpios
arm64: dts: qcom: sm7225-fairphone-fp4: Enable display and GPU
arm64: dts: qcom: sm6350: Remove "disabled" state of GMU
arm64: dts: qcom: msm8916-samsung-fortuna/rossa: Add fuel gauge
arm64: dts: qcom: sm6350: Add interconnect for MDSS
arm64: dts: qcom: msm8916-samsung-fortuna/rossa: Add initial device trees
arm64: dts: qcom: sm8550: Switch UFS from opp-table-hz to opp-v2
arm64: dts: qcom: sc8180x: describe all PCI MSI interrupts
arm64: dts: qcom: minor whitespace cleanup
...
Link: https://lore.kernel.org/r/20240225050146.484422-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
- new H616 peripherals: SPDIF, DMA, THS
- H616 fanout pin configuration
- H6 SPDIF node update
- minor cleanups
- enabled regulator on FETA40i board
- added wifi to Transpeed 8K618-T board
- new boards: Jide Remix Mini PC, Sipeed Longan Module 3H and
Longan Pi 3H
* tag 'sunxi-dt-for-6.9-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h616: Add thermal sensor and zones
ARM: dts: sun8i: Open FETA40i-C regulator aldo1
arm64: dts: allwinner: h616: Add Sipeed Longan SoM 3H and Pi 3H board support
dt-bindings: arm: sunxi: Add Sipeed Longan Module 3H and Longan Pi 3H
arm64: dts: allwinner: h616: minor whitespace cleanup
arm64: dts: allwinner: use capital "OR" for multiple licenses in SPDX
arm64: dts: allwinner: Transpeed 8K618-T: add WiFi nodes
arm64: dts: allwinner: h616: Add 32K fanout pin
arm64: dts: allwinner: Add Jide Remix Mini PC support
dt-bindings: arm: sunxi: document Remix Mini PC name
dt-bindings: vendor-prefixes: add Jide
arm64: dts: allwinner: h616: Add SPDIF device node
arm64: dts: allwinner: h616: Add DMA controller and DMA channels
arm64: dts: allwinner: h6: Add RX DMA channel for SPDIF
dt-bindings: sram: narrow regex for unit address to hex numbers
arm64: dts: allwinner: h616: Add Orange Pi Zero 2W to Makefile
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
dt-bindings: Changes for v6.9-rc1
This contains device tree bindings additions for LG Optimus devices as
well as cleanups for the PMC hardware block.
* tag 'tegra-for-6.9-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: arm: tegra: Add LG Optimus Vu P895 and Optimus 4X P880
dt-bindings: tegra: pmc: Update scratch as an optional aperture
Link: https://lore.kernel.org/r/20240223174849.1509465-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards: Powkiddy RGB10MAX3, Pine64 PineTab2, NanoPi R6C+R6S, Anbernic
RG-ARC S and RG-ARC D.
New peripherals: rs485 on Theobroma Systems boards, usb3 on Indidroid Nova,
Edgeble NCM6A (usb2, m.2, ethernet, wifi, cpu-regulator), Rock-5b rfkill
for wifi, cache information for rk3399.
Snmaller DT fixes (hdmi nodes, aliases, redundant card-detect gpios, max-
frequency for spi-flashes on rock-pi 4 boards, missing pmu-io-domains on
Ringneck)
* tag 'v6.9-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (38 commits)
arm64: dts: rockchip: Add USB3.0 to Indiedroid Nova
arm64: dts: rockchip: adjust phy-handle name on rock-pi-e
arm64: dts: rockchip: fix rk3399 hdmi ports node
arm64: dts: rockchip: fix rk3328 hdmi ports node
arm64: dts: rockchip: remove redundant cd-gpios from rk3588 sdmmc nodes
arm64: dts: rockchip: add rs485 support on uart5 of px30-ringneck-haikou
arm64: dts: rockchip: add rs485 support on uart2 of rk3399-puma-haikou
arm64: dts: rockchip: Add Powkiddy RGB10MAX3
dt-bindings: arm: rockchip: Add Powkiddy RGB10MAX3
arm64: dts: rockchip: Update powkiddy rk2023 dtsi for RGB10MAX3
arm64: dts: rockchip: Add devicetree for Pine64 PineTab2
dt-bindings: arm64: rockchip: Add Pine64 PineTab2
arm64: dts: rockchip: Add Touch to Anbernic RG-ARC D
arm64: dts: rockchip: fix nanopc-t6 sdmmc regulator
arm64: dts: rockchip: remove duplicate SPI aliases for helios64
arm64: dts: rockchip: add spi controller aliases on rk3399
arm64: dts: rockchip: Add support for NanoPi R6C
arm64: dts: rockchip: Add support for NanoPi R6S
dt-bindings: arm: rockchip: Add NanoPi R6 series boards
arm64: dts: rockchip: Increase maximum frequency of SPI flash for ROCK Pi 4A/B/C
...
Link: https://lore.kernel.org/r/3622360.hdfAi7Kttb@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into soc/dt
DTS fixes for the ARM Versatile boards:
- Use the "mtd-rom" compatible for the Realview ROM
- Fix up two VGA connector cells and labels
- Fix up the Cortex spelling
* tag 'versatile-dts-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
dt-bindings: arm: realview: Spelling s/ARM 11/Arm11/, s/Cortex A-/Cortex-A/
ARM: dts: integrator: Fix up VGA connector
ARM: dts: versatile: Fix up VGA connector
ARM: dts: arm: realview: Fix development chip ROM compatible value
Link: https://lore.kernel.org/r/CACRpkdaL6j6OdixHFHoMms4e=tXEw_6ynBMFb6m8=7KkVgEedA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
