| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree change for 6.6:
- New device tree for TQ-Systems MBLS102xA board.
- A bunch of dtschema warning fixes from Fabio Estevam and
Krzysztof Kozlowski.
- Add missing supply regulator for imx6qdl-mba6 and imx6qdl-tqma6x.
- Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties.
- Disable the internal i.MX6 watchdog and rely on PMIC reboot handler
for phycore and pfla02 boards.
- Replace NO_PAD_CTL by explicit pad configuration for karo-tx25 board.
* tag 'imx-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (35 commits)
ARM: dts: imx6qdl: mba6: Fix gpio-keys button node names
ARM: dts: imx6ul: Fix nand-controller #size-cells
ARM: dts: imx6ul: mba6ulx: Fix stmpe811 node warnings
ARM: dts: imx6dl-b1x5pv2: Fix simple-audio routing property
ARM: dts: imx6q-prti6q: Fix the SDIO wifi node
ARM: dts: vfxxx: Pass 'mmc' as the esdhc node names
ARM: dts: imx53-smd: Remove invalid SPI flash entry
ARM: dts: imx50-evk: Use generic node name for SPI NOR flash
ARM: dts: imx6q-cm-fx6: Remove invalid SPI flash entry
ARM: dts: ls1021a: add TQMLS1021A flash partition layout
ARM: dts: ls1021a: add TQ-Systems MBLS102xA device tree
ARM: dts: imx: Remove 'compatible' from the pfuze nodes
ARM: dts: imx: Pass #sound-dai-cells to sgtl5000
ARM: dts: nxp: mxs: split interrupts per cells
ARM: dts: imx6ul-geam: Remove invalid sgtl5000 property
ARM: dts: imx28: drop incorrect reg in fixed regulators
ARM: dts: imx27: drop incorrect reg in fixed regulators
ARM: dts: imx25: drop incorrect reg in fixed regulators
ARM: dts: imx23: drop incorrect reg in fixed regulators
ARM: dts: imx50-kobo-aura: switch to enable-gpios
...
Link: https://lore.kernel.org/r/20230813133354.847010-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt
mvebu dt for 6.6 (part 1)
Fix style issue and incorrect syntax
* tag 'mvebu-dt-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: dts: marvell: dove: drop incorrect reg in fixed regulators
ARM: dts: marvell: armada: drop incorrect reg in fixed regulators
ARM: dts: marvell: add missing space before {
Link: https://lore.kernel.org/r/87h6p4t0lv.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Fixed regulators are not in some bus and bindings do not allow a "reg"
property. Move them out of "regulators" node to top-level.
dove-cubox.dtb: regulator@1: Unevaluated properties are not allowed ('reg' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Fixed regulators are not in some bus and bindings do not allow a "reg"
property. Move them out of "regulators" node to top-level.
armada-370-dlink-dns327l.dtb: regulator@1: Unevaluated properties are not allowed ('reg' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
"make dtbs_check":
arch/arm/boot/dts/nuvoton-npcm730-gbs.dtb: i2c-switch@71: $nodename:0: 'i2c-switch@71' does not match '^(i2c-?)?mux'
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
...
Fix this by renaming PCA954x nodes to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
"make dtbs_check":
arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dtb: i2c-switch@70: $nodename:0: 'i2c-switch@70' does not match '^(i2c-?)?mux'
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
arm/boot/dts/aspeed-bmc-bytedance-g220a.dtb: i2c-switch@70: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@0', 'i2c@1', 'i2c@2', 'i2c@3' were unexpected)
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
...
Fix this by renaming PCA954x nodes to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
File names inside the file does not add much and just makes it
difficult to move the files, often the file name is not updated
and becomes wrong. Remove them.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This looks better and allows us to see the row and column numbers
more easily. Switch to this macro here.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This node does not follow the DT binding schema, correct this.
The arm,pl011 binding requires the first clock to be named "uartclk".
Should result in no functional change.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This node does not follow the DT binding schema, correct this.
All "regulator-fixed" are voltage type, so drop "regulator-type".
Should result in no functional change.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This node does not follow the DT binding schema, correct this.
Should result in no functional change.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This node does not follow the DT binding schema, correct this.
Should result in no functional change.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Writing this bit can be handled by the syscon-reboot driver.
Add this node to DT.
Signed-off-by: Andrew Davis <afd@ti.com>
Tested-by: Fabian Vogt <fabian@ritter-vogt.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Fabian Vogt <fabian@ritter-vogt.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM changes for v6.6
1. Galaxy S II: correct LCD screen's physical size.
2. Add Samsung Galaxy Tab 3 8.0 boards (Exynos4212).
3. Galaxy S3 family: add USB connector and USB OTG. Full USB OTG still
seems not to work, but at least HDMI improved and dtbs_check is
happy.
4. Fix issues pointed out by dtbs_check and W=1: unit addresses, use
'gpios' suffix over 'gpio', update i2c-arb device node to newer
binding.
5. Few white-space cleanups.
* tag 'samsung-dt-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: samsung: exynos4412-midas: add USB connector and USB OTG
ARM: dts: samsung: exynos5250-snow: switch i2c-arb to new child variant
ARM: dts: samsung: exynos5250-snow: use 'gpios' suffix for i2c-arb
ARM: dts: samsung: fix Exynos4212 Tab3 makefile entries
ARM: dts: exynos: Add Samsung Galaxy Tab 3 8.0 boards
ARM: dts: samsung: s5pv210-smdkv210: correct ethernet reg addresses (split)
ARM: dts: samsung: s3c6410-mini6410: correct ethernet reg addresses (split)
ARM: dts: samsung: exynos4210-i9100: Fix LCD screen's physical size
ARM: dts: s5pv210: minor whitespace cleanup around '='
ARM: dts: exynos: minor whitespace cleanup around '='
Link: https://lore.kernel.org/r/20230810151250.220202-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into soc/dt
ASPEED device tree updates for 6.6
- New machines
* Inventec's Starscream AST2600 BMC, for a x86 server platform
* Meta's Yossemite 4 AST2600 BMC, for a multi-node server platform
- Big device tree rework for IBM's Power10 BMC platforms
- Updates for wedge400 and Mt Mitchell
- AST2600 I3C and VUART descriptions
* tag 'aspeed-6.6-devicetree-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: dts: aspeed: Add AST2600 I3C control pins
ARM: dts: aspeed: everest: Move common devices up
ARM: dts: aspeed: everest: Reorganise FSI description
ARM: dts: aspeed: rainier: Reorganise FSI description
ARM: dts: aspeed: bonnell: Reorganise FSI description
ARM: dts: aspeed: Add P10 FSI descriptions
ARM: dts: aspeed: yosemite4: add Facebook Yosemite 4 BMC
dt-bindings: arm: aspeed: add Facebook Yosemite 4 board
ARM: dts: aspeed: wedge400: Set eMMC max frequency
ARM: dts: aspeed: wedge400: Enable more ADC channels
ARM: dts: aspeed: Update spi alias in Facebook AST2500 Common dtsi
ARM: dts: aspeed: rainier: Remove TPM device
ARM: dts: aspeed: Add AST2600 VUARTs
ARM: dts: aspeed: mtmitchell: Add MCTP
ARM: dts: aspeed: mtmitchell: Update ADC sensors for Mt.Mitchell DVT systems
ARM: dts: aspeed: mtmitchell: Enable the BMC UART8 and UART9
ARM: dts: aspeed: Adding Inventec Starscream BMC
dt-bindings: arm: aspeed: add Inventec starscream-bmc
ARM: dts: aspeed: bonnell: Add DIMM SPD
Link: https://lore.kernel.org/r/CACPK8Xc76O5kLEAXRtbFXZcP=ObrKR0Kpez_er+zV2vZffZe7A@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/dt
Devicetree changes for omaps for v6.6
Updates for opp and pinctrl nodes to follow the devicetree bindings.
* tag 'omap-for-v6.6/dt-take2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
arm: dts: ti: omap: Fix OPP table node names
arm: dts: ti: omap: am5729-beagleboneai: Drop the OPP
arm: dts: ti: omap: omap36xx: Rename opp_supply nodename
ARM: dts: ti: add missing space before {
ARM: dts: ti: split interrupts per cells
ARM: dts: Unify pinctrl-single pin group nodes for davinci
Link: https://lore.kernel.org/r/pull-1691658952-110529@atomide.com-3
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
- Add D1 GPADC node
- Introduce support for OrangePi Zero 3 SBC
- Enable DT overlay support for Allwinner H3 boards
* tag 'sunxi-dt-for-6.6-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm: dts: Enable device-tree overlay support for sun8i-h3 pi devices
arm64: dts: allwinner: h616: Add OrangePi Zero 3 board support
dt-bindings: arm: sunxi: document Orange Pi Zero 3 board name
arm64: dts: allwinner: h616: Split Orange Pi Zero 2 DT
riscv: dts: allwinner: d1: Add GPADC node
Link: https://lore.kernel.org/r/20230806180546.GA127039@jernej-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into soc/dt
ARM: DT: HiSilicon ARM32 DT updates for v6.6
- Fix "status" values
* tag 'hisi-arm32-dt-for-6.6' of https://github.com/hisilicon/linux-hisi:
ARM: dts: hisilicon: Fix "status" values
Link: https://lore.kernel.org/r/64CC9B21.70907@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
AT91 device tree updates for 6.6
It contains:
- TCB timer nodes adition for at91-sama5d3_ksz9477_evb board
- device tee cleanups
* tag 'at91-dt-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: remove duplicated entries
ARM: dts: microchip: split interrupts per cells
ARM: dts: at91: ksz9477_evb: Add tx-internal-delay-ps property for port5
ARM: dts: at91: ksz9477_evb: Add missing timer nodes
ARM: dts: at91-vinco: Fix "status" values
ARM: dts: microchip: add missing space before {
ARM: dts: microchip: minor whitespace cleanup around '='
Link: https://lore.kernel.org/r/20230804044102.231448-1-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Each interrupt should be in its own cell. This is much more readable.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20230730111536.98164-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.6
- Add Clocked Serial Interface (CSI) support for the RZ/V2M SoC,
- Add PMIC, RTC, and PWM support for the RZ/G2L, RZ/G2LC, and RZ/V2L
SMARC EVK development boards,
- Add PWM (MTU3a) support for the RZ/G2UL and RZ/Five SoCs,
- Add External interrupt (INTC-EX) support for the R-Car S4-8 SoC,
- Add LED support for the Spider development board,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: spider-cpu: Add GP LEDs
arm64: dts: renesas: r8a779f0: Add INTC-EX node
arm64: dts: renesas: rzg2ul-smarc: Add support for enabling MTU3
arm64: dts: renesas: r9a07g043: Add MTU3a node
ARM dts: renesas: armadillo800eva: Switch to enable-gpios
arm64: dts: renesas: rzg2lc-smarc-som: Enable PMIC and built-in RTC
arm64: dts: renesas: rzg2lc-smarc-som: Add PHY interrupt support for ETH0
riscv: dts: renesas: Clean up dtbs_check W=1 warning due to empty phy node
arm64: dts: renesas: rzg2lc-smarc: Add support for enabling MTU3
arm64: dts: renesas: rzg2l-smarc: Add support for enabling MTU3
arm64: dts: renesas: Add missing space before {
ARM: dts: renesas: Add missing space before {
arm64: dts: renesas: Minor whitespace cleanup around '='
arm64: dts: renesas: rzg2l-smarc-som: Enable PMIC and built-in RTC
arm64: dts: renesas: r9a09g011: Add CSI nodes
arm64: dts: renesas: rzg2l: Fix txdv-skew-psec typos
arm64: dts: renesas: rzg2l: Update overfow/underflow IRQ names for MTU3 channels
Link: https://lore.kernel.org/r/cover.1690545144.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Numbers are separated by dashes. Fixes the warnings:
arch/arm/boot/dts/nxp/imx/imx6q-mba6a.dtb: gpio-buttons: 'button1',
'button2', 'button3' do not match any of the regexes:
'^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/input/gpio-keys.yaml#
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
nand-controller.yaml bindings says #size-cells shall be set to 0.
Fixes the dtbs_check warning:
arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2l-mba6ulx.dtb:
nand-controller@1806000: #size-cells:0:0: 0 was expected
from schema $id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml#
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
interrupt-controller is only valid for gpio subnode, remove it.
Rename touchscreen subnode according to bindings.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Per simple-card.yaml, 'simple-audio-card,audio-routing' is not a valid
property.
Change it to 'simple-audio-card,routing'.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add pinctrl support for the I3C1 and I3C2 pins.
Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20230809134413.3614535-1-dylan_hung@aspeedtech.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Other systems have the SoC devices listed before the FSI description.
Move them up in order to make them similar.
Link: https://lore.kernel.org/r/20230809074921.116987-6-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Use the P10 quad FSI CFAM description to reduce duplication and add the
I2C responders and associated engines.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20230809074921.116987-5-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Use the P10 quad FSI CFAM description to reduce duplication.
Link: https://lore.kernel.org/r/20230809074921.116987-4-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Use the P10 dual FSI CFAM description to reduce duplication.
Link: https://lore.kernel.org/r/20230809074921.116987-3-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
These will be used by BMCs attached to a IBM Power10 server CPU.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20230809074921.116987-2-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Add linux device tree entry for Yosemite 4 devices connected to BMC.
The Yosemite 4 is a Meta multi-node server platform, based on AST2600 SoC.
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230810070032.335161-3-Delphine_CC_Chiu@wiwynn.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Set eMMC max frequency to 25MHz to prevent intermittent eMMC access
failures.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230803230324.731268-4-rentao.bupt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Enable ASPEED-ADC channels 5-8 to support voltage monitoring of all the
Wedge400 hardware revisions.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230803230324.731268-3-rentao.bupt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Set FMC controller to "spi0" in ast2500-facebook-netbmc-common.dtsi so
the spi bus is consistent with the flash labels defined in flash layout.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230803230324.731268-2-rentao.bupt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
TPM is disabled in Rainier, remove TPM device.
Signed-off-by: Lakshmi Yadlapati <lakshmiy@us.ibm.com>
Link: https://lore.kernel.org/r/20230725141606.1641080-2-lakshmiy@us.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The AST2600 has two more vuarts, placed between the existing two in the
memory map.
Link: https://lore.kernel.org/r/20230620042257.73665-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Enable MCTP driver on I2C3 bus for MCTP transaction
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20230620092537.20007-4-chanh@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Change to use I2C ADC controller (ltc2497) for Mt.Mitchell DVT and
later hardware.
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20230620092537.20007-3-chanh@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The BMC UART8 and UART9 were connected to the Secpro and Mpro console
of socket S1 on the Mt.Mitchell system.
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20230620092537.20007-2-chanh@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Wifi chip description, which causes the following schema warning:
imx6q-prti6q.dtb: mmc@2194000: Unevaluated properties are not allowed ('wifi' was unexpected)
Pass the missing items to fix it.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Pass 'mmc' as the esdhc node names to fix the following schema
warnings:
vf610-cosmic.dtb: esdhc@400b1000: $nodename:0: 'esdhc@400b1000' does not match '^mmc(@.*)?$'
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
"st,m25p" is not a valid compatible according to jedec,spi-nor.yaml.
Remove it.
Also, node names should be generic, so use 'flash' as the SPI NOR flash
node name.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Node names should be generic, so use 'flash' as the SPI NOR flash node
name.
This fixes the following schema warning:
imx53-smd.dtb: m25p32@1: $nodename:0: 'm25p32@1' does not match '^(flash|.*sram|nand)(@.*)?$'
from schema $id: http://devicetree.org/schemas/mtd/jedec,spi-nor.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
"st,m25p" is not a valid compatible according to jedec,spi-nor.yaml.
Remove it.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The bootloader does not add the partitions into DT, so add them manually
here.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add device tree for the MBLS102xA mainboard with TQMLS1021A SoM.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Passing the 'compatible' property inside the pfuze100 regulator nodes
is not allowed per pfuze100.yaml and results in the following
warning:
imx6q-bosch-acc.dtb: pmic@8: regulators:sw3a: Unevaluated properties are not allowed ('compatible' was unexpected)
Remove it.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
As per sgtl5000.yaml, '#sound-dai-cells' is a required property.
Pass it to fix the following schema warnings:
imx53-mba53.dtb: sgtl5000@a: '#sound-dai-cells' is a required property
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add the '-@' DTC option for the sun8i-h3 pi-class devices. This option
populates the '__symbols__' node that contains all the necessary symbols
for supporting device-tree overlays (for instance from the firmware or
the bootloader) on these devices.
These devices allow various modules to be connected and this enables
users to create out-of-tree device-tree overlays for these modules.
Please note that this change does increase the size of the resulting DTB
by ~30%. For example, with v6.4 increase in size is as follows:
22909 -> 29564 sun8i-h3-orangepi-lite.dtb
24214 -> 30935 sun8i-h3-bananapi-m2-plus.dtb
23915 -> 30664 sun8i-h3-nanopi-m1-plus.dtb
22969 -> 29537 sun8i-h3-nanopi-m1.dtb
24157 -> 30836 sun8i-h3-nanopi-duo2.dtb
24110 -> 30845 sun8i-h3-orangepi-plus2e.dtb
23472 -> 30037 sun8i-h3-orangepi-one.dtb
24600 -> 31410 sun8i-h3-orangepi-plus.dtb
23618 -> 30230 sun8i-h3-orangepi-2.dtb
22170 -> 28548 sun8i-h3-orangepi-zero-plus2.dtb
23258 -> 29795 sun8i-h3-nanopi-neo-air.dtb
23113 -> 29699 sun8i-h3-zeropi.dtb
22803 -> 29270 sun8i-h3-nanopi-neo.dtb
24674 -> 31318 sun8i-h3-nanopi-r1.dtb
23477 -> 30038 sun8i-h3-orangepi-pc.dtb
24622 -> 31380 sun8i-h3-bananapi-m2-plus-v1.2.dtb
23750 -> 30366 sun8i-h3-orangepi-pc-plus.dtb
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230627133703.355893-1-felix.moessbauer@siemens.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
|
