| Age | Commit message (Collapse) | Author |
|---|
|
Pull SoC devicetree updates from Arnd Bergmann:
"There are 11 newly supported SoCs, but these are all either new
variants of existing designs, or straight reuses of the existing chip
in a new package:
- RK3562 is a new chip based on the old Cortex-A53 core, apparently a
low-cost version of the Cortex-A55 based RK3568/RK3566.
- NXP i.MX94 is a minor variation of i.MX93/i.MX95 with a different
set of on-chip peripherals.
- Renesas RZ/V2N (R9A09G056) is a new member of the larger RZ/V2
family
- Amlogic S6/S7/S7D
- Samsung Exynos7870 is an older chip similar to Exynos7885
- WonderMedia wm8950 is a minor variation on the wm8850 chip
- Amlogic s805y is almost idential to s805x
- Allwinner A523 is similar to A527 and T527
- Qualcomm MSM8926 is a variant of MSM8226
- Qualcomm Snapdragon X1P42100 is related to R1E80100
There are also 65 boards, including reference designs for the chips
above, this includes
- 12 new boards based on TI K3 series chips, most of them from
Toradex
- 10 devices using Rockchips RK35xx and PX30 chips
- 2 phones and 2 laptops based on Qualcomm Snapdragon designs
- 10 NXP i.MX8/i.MX9 boards, mostly for embedded/industrial uses
- 3 Samsung Galaxy phones based on Exynos7870
- 5 Allwinner based boards using a variety of ARMv8 chips
- 9 32-bit machines, each based on a different SoC family
Aside from the new hardware, there is the usual set of cleanups and
newly added hardware support on existing machines, for a total of 965
devicetree changesets"
* tag 'soc-dt-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (956 commits)
MAINTAINERS, mailmap: update Sven Peter's email address
arm64: dts: renesas: rzg3e-smarc-som: Reduce I2C2 clock frequency
arm64: dts: nuvoton: Add pinctrl
ARM: dts: samsung: sp5v210-aries: Align wifi node name with bindings
arm64: dts: blaize-blzp1600: Enable GPIO support
dt-bindings: clock: socfpga: convert to yaml
arm64: dts: rockchip: move rk3562 pinctrl node outside the soc node
arm64: dts: rockchip: fix rk3562 pcie unit addresses
arm64: dts: rockchip: move rk3528 pinctrl node outside the soc node
arm64: dts: rockchip: remove a double-empty line from rk3576 core dtsi
arm64: dts: rockchip: move rk3576 pinctrl node outside the soc node
arm64: dts: rockchip: fix rk3576 pcie unit addresses
arm64: dts: rockchip: Drop assigned-clock* from cpu nodes on rk3588
arm64: dts: rockchip: Add missing SFC power-domains to rk3576
Revert "arm64: dts: mediatek: mt8390-genio-common: Add firmware-name for scp0"
arm64: dts: mediatek: mt8188: Address binding warnings for MDP3 nodes
arm64: dts: mt6359: Rename RTC node to match binding expectations
arm64: dts: mt8365-evk: Add goodix touchscreen support
arm64: dts: mediatek: mt8188: Add missing #reset-cells property
arm64: dts: airoha: en7581: Add PCIe nodes to EN7581 SoC evaluation board
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"The main update in size is the removal of the TI DaVinci DA830 SoC
support. DA830 is similar to DA850, which remain supported, but only
the reference board was ever supported, and we removed that one 3
years ago as it had never been converted to devicetree.
There are some other cleanups for OMAP4 and a few boards using old
GPIO interfaces"
* tag 'soc-arm-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: s3c: stop including gpio.h
ARM: dts: davinci: da850-evm: Increase fifo threshold
ARM: OMAP2+: Fix l4ls clk domain handling in STANDBY
ARM: broadcom: MAINTAINERS: Cover bcm2712 files
bus: ti-sysc: PRUSS OCP configuration
ARM: davinci: remove support for da830
ARM: omap: pmic-cpcap: do not mess around without CPCAP or OMAP4
ARM: omap2plus_defconfig: enable I2C devices of GTA04
ARM: s3c/gpio: use new line value setter callbacks
ARM: scoop/gpio: use new line value setter callbacks
ARM: sa1100/gpio: use new line value setter callbacks
ARM: orion/gpio: use new line value setter callbacks
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
More Arm32 DeviceTree updates for v6.16
This adds missing LVDS clocks to APQ8064 display controller. The unused HDMI HPD
gpio on ifc6410 is dropped (chip uses pinmuxed hpd function).
Missing timer clocks are added to MSM8960 to address bindings warning.
* tag 'qcom-arm32-for-6.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: apq8064-ifc6410: drop HDMI HPD GPIO
ARM: dts: qcom: apq8064: link LVDS clocks
ARM: dts: qcom-msm8960: add missing clocks to the timer node
Link: https://lore.kernel.org/r/20250520024716.39418-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
Additional MediaTek ARM64 DTS updates for v6.16
This addresses devicetree binding warnings happening on the
MDP3 nodes in mt8188 dts, reverts the commit adding the SCP
firmware-name as strongly suggested by Arnd, and also adds
some more late commits.
In particular:
- MT6359 PMIC
- Renamed PMIC RTC node to fix dtbs_check warning
- MT7988(A)
- Support for SPI controllers was added to SoC and BPI-R4
- Support for XSPHY, USB and PCIe2 was added as well
- Fan and cooling maps were added to BPI-R4 machine
- Added BananaPi R4 2G5 machine variant
- MT8365
- Added touchscreen support to MT8365 Genio EVK
- MT8188
- Addressed dtbs_check warnings for MDP3 nodes
- MT8390 (Genio)
- Reverted SCP firmware-name addition
* tag 'mtk-dts64-for-v6.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (42 commits)
Revert "arm64: dts: mediatek: mt8390-genio-common: Add firmware-name for scp0"
arm64: dts: mediatek: mt8188: Address binding warnings for MDP3 nodes
arm64: dts: mt6359: Rename RTC node to match binding expectations
arm64: dts: mt8365-evk: Add goodix touchscreen support
arm64: dts: mediatek: mt8188: Add missing #reset-cells property
arm64: dts: airoha: en7581: Add PCIe nodes to EN7581 SoC evaluation board
arm64: dts: airoha: en7581: Add gpio-ranges property for gpio controller
arm64: dts: mediatek: mt7988a-bpi-r4: configure spi-nodes
arm64: dts: mediatek: mt7988a-bpi-r4: Add fan and coolingmaps
arm64: dts: mediatek: mt7988: add phy calibration efuse subnodes
arm64: dts: mediatek: mt7988: move uart0 and spi1 pins to soc dtsi
arm64: dts: mediatek: mt7988: add spi controllers
arm64: dts: mediatek: mt7988a-bpi-r4: enable xsphy
arm64: dts: mediatek: mt7988: Add xsphy for ssusb0/pcie2
arm64: dts: mediatek: mt7988a-bpi-r4: allow hw variants of bpi-r4
dt-bindings: arm: mediatek: add bpi-r4 2g5 phy variant
arm64: dts: mt6359: Add missing 'compatible' property to regulators node
arm/arm64: dts: mediatek: Add missing "#sound-dai-cells" to linux,bt-sco
arm64: dts: mediatek: mt8390-genio-common: Set ssusb2 default dual role mode to host
arm64: dts: mediatek: mt8395-genio-1200-evk: Disable unused backlight
...
Link: https://lore.kernel.org/r/20250520114356.1194450-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
RK3036 usbphy addition and two Sonoff iHost adjustments.
* tag 'v6.16-rockchip-dts32-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: add rk3036 usb2phy nodes and enable them on kylin
ARM: dts: rockchip: Sonoff-iHost: correct IO domain voltages
ARM: dts: rockchip: Sonoff-iHost: adjust SDIO for stability
Link: https://lore.kernel.org/r/3652020.5fSG56mABF@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
Microchip AT91 device tree updates for v6.16
This update includes:
- more controllers enabled for SAMA7D65 SoC (Ethernet, Flexcoms,
SRAM, DRAM, RTC, RTT, GBPR)
- cleanups and fixes for Calao boards
* tag 'at91-dt-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: sama7g54_curiosity: Add fixed-partitions for spi-nor flash
ARM: dts: microchip: sama7d65: Add RTT timer to curiosity board
ARM: dts: microchip: sama7d65: Add RTT and GPBR Support for sama7d65 SoC
ARM: dts: microchip: sama7d65: Add SRAM and DRAM components support
ARM: dts: microchip: sama7d65_curiosity: add EEPROM
ARM: dts: microchip: sama7d65: Add MCP16502 to sama7d65 curiosity
ARM: dts: microchip: sama7d65: Enable GMAC interface
ARM: dts: microchip: sama7d65: Add FLEXCOMs to sama7d65 SoC
ARM: dts: microchip: sama7d65: Add gmac interfaces for sama7d65 SoC
ARM: dts: at91: at91sam9263: fix NAND chip selects
ARM: dts: at91: usb_a9g20: move wrong RTC node
ARM: dts: at91: calao_usb: simplify chosen node
ARM: dts: at91: usb_a9260: use 'stdout-path'
ARM: dts: at91: calao_usb: simplify memory node
ARM: dts: at91: usb_a9263: fix GPIO for Dataflash chip select
ARM: dts: at91: usb_a9g20: add SPI EEPROM
Link: https://lore.kernel.org/r/20250516055330.10852-1-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner device tree changes for 6.16
Introduce Allwinner A523 / A527 / T527 SoC family w/ three new devices:
- Radxa Cubie A5E
- X96Q-Pro+
- Avaota-A1
Also enable EMAC0 ethernet MAC on A523 family for Cubie A5E & Avaota-A1.
Note: the SoC has two different ethernet controllers.
Changes to existing SoCs:
- Enable GPU on H616 with all boards enabled
- Set maximum MMC frequency for the A100
Changes to existing boards:
- Add WiFi/BT header on PINE64 A64 boards
- Add hp-det-gpios for Anbernic RG35XX
- Add support for PHY LEDs on Bananapi (the original one)
Add new devices for existing SoCs:
- YuzukiHD Chameleon based on H6
- Liontron H-A133L based on A133 (compatible with A100)
Tree wide cleanups:
- Use preferred node names for cooling maps
- Align wifi node name with bindings
- Drop spurious 'clock-latency-ns' properties for H5 & H6
* tag 'sunxi-dt-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (27 commits)
arm64: dts: allwinner: a100: add Liontron H-A133L board support
dt-bindings: arm: sunxi: Add Liontron H-A133L board name
dt-bindings: vendor-prefixes: Add Liontron name
ARM: dts: bananapi: add support for PHY LEDs
arm64: dts: allwinner: a100: set maximum MMC frequency
arm64: dts: allwinner: t527: add EMAC0 to Avaota-A1 board
arm64: dts: allwinner: a527: add EMAC0 to Radxa A5E board
arm64: dts: allwinner: a523: Add EMAC0 ethernet MAC
dt-bindings: sram: sunxi-sram: Add A523 compatible
arm64: dts: allwinner: a64: Add WiFi/BT header on SOPINE Baseboard
arm64: dts: allwinner: a64: Add WiFi/BT header on PINE A64
arm64: dts: allwinner: correct the model name for Radxa Cubie A5E
ARM: dts: allwinner: Align wifi node name with bindings
arm64: dts: allwinner: Align wifi node name with bindings
arm64: dts: allwinner: h616: enable Mali GPU for all boards
arm64: dts: allwinner: h616: Add Mali GPU node
arm64: dts: allwinner: h700: Add hp-det-gpios for Anbernic RG35XX
arm64: dts: allwinner: h5/h6: Drop spurious 'clock-latency-ns' properties
arm/arm64: dts: allwinner: Use preferred node names for cooling maps
arm64: dts: allwinner: h616: add YuzukiHD Chameleon support
...
Link: https://lore.kernel.org/r/aCaeZJ2t4S_xhgjp@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.16, round 1
Highlights:
----------
- MCU:
- Add low power timer on STM32F746
- Add STM32H747 High end MCU support. It embeds:
- dual-core (Cortex-M7 + Cortex-M4)
- up to 2 Mbytes flash
- 1 Mbyte of internal RAM
- Add STM32H747i-disco board support. Detailed information can be
found at:
https://www.st.com/en/evaluation-tools/stm32h747i-disco.html
- MPU:
- STM32MP13:
- Add VREFINT calibration support based on ADC.
- STMP32MP15:
- Add new Ultratronik Fly board support:
- based on STM32MP157C SoC
- 1GB of DDR3
- Several connections are available on this boards:
2*USB2.0, 1*USB2.0 MiniUSB, Debug UART, 1*UART, 1*USART,
SDcard, RJ45, ...
- STM32MP25:
- Add OCTOSPI support on STM32MP25 SoCs
- Add SPI NOR flash support on STM32MP257F-EV1 connected to OSPI1
- Add Low power timer TIMER (LPTIM) on STM32MP25 SoCs and use
LPTIM3 as low power broadcast timer on STM32MP257F-EV1.
* tag 'stm32-dt-for-v6.16-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (22 commits)
ARM: dts: stm32: add initial support for stm32mp157-ultra-fly-sbc board
MAINTAINERS: Add entry for ULTRATRONIK BOARD SUPPORT
dt-bindings: arm: stm32: Document Ultratronik's Fly board DT binding
dt-bindings: vendor-prefixes: Add Ultratronik
arm64: dts: st: use lptimer3 as tick broadcast source on stm32mp257f-ev1
arm64: dts: st: add low-power timer nodes on stm32mp251
arm64: defconfig: enable STM32 LP timer clockevent driver
arm64: dts: st: Add SPI NOR flash support on stm32mp257f-ev1 board
arm64: dts: st: Add ospi port1 pinctrl entries in stm32mp25-pinctrl.dtsi
arm64: dts: st: Add OMM node on stm32mp251
ARM: dts: stm32: support STM32h747i-disco board
ARM: dts: stm32: add an extra pin map for USART1 on stm32h743
ARM: dts: stm32: add pin map for UART8 controller on stm32h743
ARM: dts: stm32: add uart8 node for stm32h743 MCU
dt-bindings: clock: stm32h7: rename USART{7,8}_CK to UART{7,8}_CK
ARM: stm32: add a new SoC - STM32H747
dt-bindings: arm: stm32: add compatible for stm32h747i-disco board
ARM: dts: stm32h7-pinctrl: add _a suffix to u[s]art_pins phandles
ARM: dts: st: stm32: Align wifi node name with bindings
ARM: dts: stm32: add low power timer on STM32F746
...
Link: https://lore.kernel.org/r/2f101efb-6d58-48d8-983a-57e30a34827c@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm32 DeviceTree updates for v6.16
Introduce support for the AP8064-based LG Nexus 4. MSM8226 is extended
with modem-related features, the LTE-capable variant MSM8926 is
introduced, and modem support is enabled on Samsung Galaxy Tab 4.
Display-related clocks and power-domains are defined for the simple
framebuffer of Motorola Moto G, to allow booting without
clk_ignore_unused and pd_ignore_unused.
On MSM8960 SDCC BAM and thermal sensor (tsens) is introduced.
* tag 'qcom-arm32-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: apq8064: move replicator out of soc node
ARM: dts: qcom: apq8064: use new compatible for SPS SIC device
ARM: dts: qcom: apq8064: use new compatible for SFPB device
ARM: dts: qcom: apq8064 merge hw splinlock into corresponding syscon device
ARM: dts: qcom: apq8064: add missing clocks to the timer node
ARM: dts: qcom: apq8064-lg-nexus4-mako: Enable WiFi
ARM: dts: qcom: msm8226-motorola-falcon: specify vddio_disp output voltage
ARM: dts: qcom: msm8226-motorola-falcon: limit TPS65132 to 5.4V
ARM: dts: qcom: msm8226-motorola-falcon: add I2C clock frequencies
ARM: dts: qcom: msm8226-motorola-falcon: add clocks, power-domain to simpleFB
ARM: dts: qcom: ipq4019: Drop redundant CPU "clock-latency"
ARM: dts: qcom: sdx55/sdx65: Fix CPU power-domain-names
ARM: dts: qcom: msm8974: Use the header with DSI phy clock IDs
ARM: dts: qcom: msm8226: Use the header with DSI phy clock IDs
Link: https://lore.kernel.org/r/20250513214111.43401-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt
VT8500 DTS ARM changes for v6.16
1. New board: VIA APC Rock/Paper.
2. Add SCC ID register/socinfo node.
3. List all timer interrupts.
* tag 'dt-vt8500-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
ARM: dts: vt8500: list all four timer interrupts
ARM: dts: vt8500: add DT nodes for the system config ID register
ARM: dts: vt8500: Add VIA APC Rock/Paper board
dt-bindings: arm: vt8500: Add VIA APC Rock/Paper boards
Link: https://lore.kernel.org/r/20250513104216.25803-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree updates for v6.16
The Snapdragon X Plus platform and related reference device is
introduced. Devicetree for the Xiaomi Redmi Note 8 is added.
Tsens and thermal zones are added for IPQ5332 and IPQ5424. IPQ6018 gains
1.2GHz and 1.5GHz CPU frequencies. The IPQ5424 gains MMC, LEDs and
buttons, while the IPQ9574 gains NSS clock controller and SPI NAND
support.
IPQ6018 SMEM is transitioned to be described directly in the
reserved-memory node.
Display and GPU are enabled in the QCM6490-based Fairphone FP5. On
QCS6490 Rb3Gen2 ADC channels for thermal profiling are added and
Bluetooth is enabled. The USB Type-C orientation GPIO is added on the
QCS6490 Rb3Gen2 and the vision mezzanine is described.
The Fairphone FP5 gains touchscreen and USB Type-C display support, and
the QCM6490 IDP board gains a required listed of protected clocks.
The camera subsystem in SC7280 is described and UFS is transitioned to
use operating points.
On MSM8916, MSM8919 and MSM8939, and devices on these platforms, the
UART pinctrl state is cleaned up.
The MSM8953 platform gains another UART and interconnects.
On SA8775P CTCU and ETR nodes are added, and the CPUfreq throttling
interrupts are added.
Samsung Galaxy S9 SM-G9600 gains a description of the MAX77705 used for
charging, fuel gauge, haptic, and LED, as well as the PMIC used for
display and touchscreen, which then is used to enable the touchscreen.
The LPG/PWM node is added to PM8937 and Xiaomi Redmi 5A gains display
backlight control.
Display and GPU are enabled for the Nothing Phone (1).
QCS615 platform gains command DB definition.
The QCS8300 platform gains description of more QUP instances, CPUfreq,
PCIe SMMU and the SPMI controller.
On SAR2130P PCIe EP device nodes are added.
On SDM630 missing resets are added for SDCC. Then on Fairphone FP3 modem
is enabled, and firmware-path are defined on ADSP and WCNSS.
The SDM845 RB3/DragonBoard845c and the QRB5165 RB5 has the sensors DSP
enabled, and the vision mezzanine on both gets their CMA configuration
cleaned up. Xiaomi Pocophone F1 gains touchscreen support.
On the SM7325 Nothing Phone (1), display, GPU, and camera EEPROMs are
described.
On SM8450 the PCIe endpoint controller is described.
For SM8550 OPP tables are described for PCIe and QUP. SM8750 gains RPMh
sleep stats.
SM8650 gians OSM L3 scaling and variety of OPP tables and missing
interconnect definitions. The thermal trip points for CPU cores and GPU
are raised in reliance on hardware throttling.
SM8650 is also transitioned to per-CPU interrupt partitions, in order to
properly describe the PMU interrupts. Missing Coresight ETE instances
are added.
On SM8750 the cluster idle states are corrected, then audio and compute
DSPs are introduced, together with the crypto and rng blocks. Modem
support is added and enabled on MTP and QRD devices.
On SC8280XP overlays are introduced for those running Linux at EL2 on
these devices. A few more temp-alarm instances are added for the PMICs.
On the X Elite platform GPU cooling and watchdog is introduced, together
with a number of smaller fixes. Dell XPS13 gains support for USB Type-C
display, the QCP gains WiFi/BT power sequence, and a few devices learns
about HBR3. The RTC support is enabled and regulators that are feeding
resources that should be always on is marked as such on a variety of
boards.
The Lenovo Thinkpad T14s DeviceTree is split in two, in order to
describe the LCD and OLED variants.
Missing properties for the crypto BAM is introduced on a variety of
platforms, taking care of a long standing error message in the kernel
log during boot.
DSI phy clock ids are transitioned to use identifiers from the PHY
header file and VBIF region size is corrected, across a large number of
platforms.
A couple of DWC3 quirks are added across a lot of platforms.
The arm32-for-6.15 pull request was accidentally merged into the
arm64-for-6.16 branch and this wasn't discovered until a significant
number of commits would have to be rebased. As such this is kept here as
well.
* tag 'qcom-arm64-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (308 commits)
arm64: dts: qcom: sdm845-xiaomi-beryllium-ebbg: introduce touchscreen support
arm64: dts: qcom: sdm845-xiaomi-beryllium-tianma: introduce touchscreen support
arm64: dts: qcom: sdm845-xiaomi-beryllium-common: add touchscreen related nodes
arm64: dts: qcom: qcs8300: add the pcie smmu node
arm64: dts: qcom: x1e80100-*: Drop useless DP3 compatible override
arm64: dts: qcom: msm8953: Add interconnects
arm64: dts: qcom: msm8953: Add uart_5
arm64: dts: qcom: sm8350: Use q6asm defines for reg
arm64: dts: qcom: sm7325-nothing-spacewar: Use q6asm defines for reg
arm64: dts: qcom: sdm850*: Use q6asm defines for reg
arm64: dts: qcom: sdm845*: Use q6asm defines for reg
arm64: dts: qcom: sc7280: Use q6asm defines for reg
arm64: dts: qcom: sc7180-acer-aspire1: Use q6asm defines for reg
arm64: dts: qcom: qrb5165-rb5: Use q6asm defines for reg
arm64: dts: qcom: msm8996*: Use q6asm defines for reg
arm64: dts: qcom: msm8953: Use q6asm defines for reg
arm64: dts: qcom: msm8916-modem-qdsp6: Use q6asm defines for reg
arm64: dts: qcom: apq8096-db820c: Use q6asm defines for reg
arm64: dts: qcom: qcm6490-fairphone-fp5: Hook up DisplayPort over USB-C
arm64: dts: qcom: qcm6490-fairphone-fp5: Add OCP96011 audio switch
...
Link: https://lore.kernel.org/r/20250511235241.15192-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into soc/dt
Nuvoton ARM devicetree updates for v6.16
- MMC, OHCI, UDC and EDAC blocks added to the NPCM7XX DTSI
- Fixes for GPIO hog names in the NPCM730 and RunBMC Olympus platforms
* tag 'nuvoton-arm-6.16-devicetree' of https://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: dts: nuvoton: Add MMC Nodes
ARM: dts: nuvoton: Add OHCI node
ARM: dts: nuvoton: Add UDC nodes
ARM: dts: nuvoton: Add EDAC node
ARM: dts: nuvoton: Align GPIO hog name with bindings
Link: https://lore.kernel.org/r/CACPK8Xe=f_hNNWUGL670x4-OeKgDB+2P+mxp5BaTLW==T5jE_A@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt
Amlogic ARM DT for v6.16:
- UART RX/TX pull-up pinconf properties for all SoCs
- New Boards:
- Meson8 TCU Fernsehfee 3.0
* tag 'amlogic-arm-dt-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
ARM: dts: amlogic: meson8-fernsehfee3: Describe regulators
ARM: dts: amlogic: Add TCU Fernsehfee 3.0
dt-bindings: arm: amlogic: Add TCU Fernsehfee 3.0 board
dt-bindings: vendor-prefixes: Add TC Unterhaltungselektronik AG
ARM: dts: amlogic: meson8b: enable UART RX and TX pull up by default
ARM: dts: amlogic: meson8: enable UART RX and TX pull up by default
Link: https://lore.kernel.org/r/838c5305-5c5b-4232-b7fe-86598dc50ace@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Recently DT bindings expect 'wifi' as node name:
s5pv210-fascinate4g.dtb: wlan@1: $nodename:0: 'wlan@1' does not match '^wifi(@.*)?$'
Link: https://lore.kernel.org/r/20250424084655.105011-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250513101023.21552-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
There is no need to specify separate HPD gpio for the HDMI block. Use
built-in HPD in order to detect if the monitor is plugged or not.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250209-fd-hdmi-hpd-v4-16-6224568ed87f@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add fixed-partitions for spi-nor flash to match the at91 boot flow
and layout of the nand flash.
Partitions can be listed from /proc/mtd:
[root@sama7g54 ~]$ cat /proc/mtd | grep qspi
mtd6: 00040000 00001000 "qspi1: at91bootstrap"
mtd7: 00100000 00001000 "qspi1: u-boot"
mtd8: 00040000 00001000 "qspi1: u-boot env"
mtd9: 00080000 00001000 "qspi1: device tree"
mtd10: 00600000 00001000 "qspi1: kernel"
[root@sama7g54 ~]$ mtdinfo /dev/mtd10
mtd10
Name: qspi1: kernel
Type: nor
Eraseblock size: 4096 bytes, 4.0 KiB
Amount of eraseblocks: 1536 (6291456 bytes, 6.0 MiB)
Minimum input/output unit size: 1 byte
Sub-page size: 1 byte
Character device major/minor: 90:20
Bad blocks are allowed: false
Device is writable: true
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Link: https://lore.kernel.org/r/20250429064547.5807-1-mihai.sain@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add RTT timer with backup register for SAMA7D65_Curiosity board.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://lore.kernel.org/r/463581224a07bf122c6907d34a0c5c71b1cc73e1.1744666011.git.Ryan.Wanner@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add RTT support for SAMA7D65 SoC. The GPBR is added so the SoC is able
to store the RTT time data.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://lore.kernel.org/r/e8868ef06102241b47883ba10edaed751831be6d.1744666011.git.Ryan.Wanner@microchip.com
[claudiu.beznea: keep nodes sorted by their address]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add SRAM, secumod, UDDRC, and DDR3phy to enable support for low power modes.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://lore.kernel.org/r/354ecd628fdd292d2125570a6b10a93cbecb7706.1744666011.git.Ryan.Wanner@microchip.com
[claudiu.beznea: keep nodes sorted by their address]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
If the MAC address is not fetched and loaded by U-boot then Linux will
have to load the address. The EEPROM and nvmem-layout to describe
EUI48 MAC address regions.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://lore.kernel.org/r/96ee6832d9b55acfae8d3560f625798025dfd89c.1743523114.git.Ryan.Wanner@microchip.com
[claudiu.beznea: added nvmem properties in gmac0 node before the status
one]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add MCP16502 to the sama7d65_curiosity board to control voltages in the
MPU. The device is connected to twi 10 interface
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://lore.kernel.org/r/60f6b7764227bb42c74404e8ca1388477183b7b5.1743523114.git.Ryan.Wanner@microchip.com
[claudiu.beznea: drop regulator-suspend-voltage for ldo2 as it is not
needed]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Enable GMAC0 interface for sama7d65_curiosity board.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://lore.kernel.org/r/fca0c1deb74006cdedbdd71061dec9dabf1e9b9a.1743523114.git.Ryan.Wanner@microchip.com
[claudiu.beznea: move gmac0 node to keep the nodes alphanumerically
sorted, dropped status property on the PHY node, added missing blank
line]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add FLEXCOMs to the SAMA7D65 SoC device tree.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://lore.kernel.org/r/d474fcd850978261ac889950ac1c3a36bc6d3926.1743523114.git.Ryan.Wanner@microchip.com
[claudiu.beznea: use vendor specific properties at the end of the node,
align DMA entries, add missing spaces]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add support for GMAC interfaces on SAMA7D65 SoC.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://lore.kernel.org/r/05b107796b6f3a173d0dd0a5b2107b675cfd994e.1743523114.git.Ryan.Wanner@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
The rk3036 does contain a usb2phy, just until now it was just used
implicitly without additional configuration. As we now have the bits
in place for it getting actually controlled, add the necessary phy-node
to the GRF simple-mfd.
Enable the phy-ports in the same patch to not create bisectability
issues, as hooking up the phys to the usb controllers would create
probe deferrals until a board enables them. Doing everything in one
patch, solves that issue.
Only rk3036-kylin actually enabled the usb controllers, so is the only
board affected.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250503201512.991277-4-heiko@sntech.de
|
|
Link LVDS clocks to the from MDP4 to the MMCC and back from the MMCC
to the MDP4 display controller.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250425-fd-mdp4-lvds-v4-7-6b212160b44c@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
In order to fix DT schema warning and describe hardware properly, add
missing sleep clock to the timer node.
Solved by Dmitry Baryshkov on the APQ8064 SoC
Link: https://lore.kernel.org/all/20250318-fix-nexus-4-v2-6-bcedd1406790@oss.qualcomm.com/
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318-expressatt-solve-dts-errors-v1-1-14012a4bc315@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
When operating at low speeds, the display may throw an underflow
error and the display itself goes blank. Increasing the fifo-th
value appears to correct this problem and the display can now
operate when the system is operating at speeds as low as 100MHz.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20250504102959.81830-1-aford173@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Add support for Ultratronik's stm32mp157c fly board. This board embeds
a STM32MP157c SOC and 1GB of DDR3. Several connections are available on
this boards: 2*USB2.0, 1*USB2.0 MiniUSB, Debug UART, 1*UART, 1*USART,
SDcard, RJ45, ...
This patch enables basic support for a kernel boot - SD-card or eMMC.
Signed-off-by: Goran Rađenović <goran.radni@gmail.com>
Link: https://lore.kernel.org/r/20250508143818.2574558-5-goran.radni@gmail.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
The board includes an STM32H747XI SoC with the following resources:
- 2 Mbytes Flash
- 1 Mbyte SRAM
- LCD-TFT controller
- MIPI-DSI interface
- FD-CAN
- USB 2.0 high-speed/full-speed
- Ethernet MAC
- camera interface
Detailed information can be found at:
https://www.st.com/en/evaluation-tools/stm32h747i-disco.html
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20250427074404.3278732-9-dario.binacchi@amarulasolutions.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add an additional pin map configuration for using the USART1 controller
on the stm32h743 MCU.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20250427074404.3278732-8-dario.binacchi@amarulasolutions.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add a pin map configuration for using the UART8 controller on the
stm32h743 MCU.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20250427074404.3278732-7-dario.binacchi@amarulasolutions.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add support for UART8 by applying the settings specified in the
reference manual RM0433.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20250427074404.3278732-6-dario.binacchi@amarulasolutions.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Allow expanding possible configurations for the same peripheral,
consistent with the scheme adopted in Linux.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20250427074404.3278732-2-dario.binacchi@amarulasolutions.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Since commit 3c3606793f7e ("dt-bindings: wireless: bcm4329-fmac: Use
wireless-controller.yaml schema"), bindings expect 'wifi' as node name:
stm32h750i-art-pi.dtb: bcrmf@1: $nodename:0: 'bcrmf@1' does not match '^wifi(@.*)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250424084706.105049-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add device tree node for the low power timer on the STM32F746.
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Link: https://lore.kernel.org/r/20250404143514.860126-1-ben.wolsieffer@hefring.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Set STM32 ADC1&2 as consumers of BSEC, to retrieve vrefint calibration
data on STM32MP13x SoCs.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://lore.kernel.org/r/20250403115954.1061528-3-olivier.moysan@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Describe vrefint calibration cell to be retrieved through bsec,
on STM32MP13x SoCs family.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://lore.kernel.org/r/20250403115954.1061528-2-olivier.moysan@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Modify the corresponding vccio according to the schematic of
Sonoff iHost. This change aligns the device tree with the actual
hardware design and improves peripheral stability.
Signed-off-by: Hao Zhang <hao.zhang@coolkit.cn>
Link: https://lore.kernel.org/r/20250509101419.460473-3-hao.zhang@coolkit.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Reduce max-frequency from 50MHz to 25MHz to improve WiFi module stability
on some Sonoff iHost units. Remove unsupported or redundant properties,
and keep only minimal, validated configuration.
Signed-off-by: Hao Zhang <hao.zhang@coolkit.cn>
Link: https://lore.kernel.org/r/20250509101419.460473-2-hao.zhang@coolkit.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The CoreSight static replicator device isn't a part of the system MMIO
bus, as such it should not be a part of the soc node. Follow the example
of other platforms and move it out of the soc bus to the top-level (and
reoder ports to follow alphabetic order).
Fixes: 7a5c275fd821 ("ARM: dts: qcom: Add apq8064 CoreSight components")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318-fix-nexus-4-v2-10-bcedd1406790@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Use new SoC-specific compatible to the SPS SIC in addition to the
"syscon" compatible and rename the node to follow the purpose of it.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318-fix-nexus-4-v2-9-bcedd1406790@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Use new SoC-specific compatible for the SFPB device node in addition to
the "syscon" compatible.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318-fix-nexus-4-v2-8-bcedd1406790@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Follow up the expected way of describing the SFPB hwspinlock and merge
hwspinlock node into corresponding syscon node, fixing several dt-schema
warnings.
Fixes: 24a9baf933dc ("ARM: dts: qcom: apq8064: Add hwmutex and SMEM nodes")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318-fix-nexus-4-v2-7-bcedd1406790@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
In order to fix DT schema warning and describe hardware properly, add
missing sleep clock to the timer node.
Fixes: f335b8af4fd5 ("ARM: dts: qcom: Add initial APQ8064 SoC and IFC6410 board device trees")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318-fix-nexus-4-v2-6-bcedd1406790@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The Wi-Fi setup is identical to that of the Sony Xperia Z (Yuga).
Verified against the legacy kernel configuration inside
arch/arm/mach-msm/board-8064-regulator.c
using LineageOS 14.1 kernel sources.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318-lg-nexus4-mako-enable-wifi-v1-1-e3b4a09d9f68@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The RTL8211E ethernet PHY driver has recently gained support for
controlling PHY LEDs via /sys/class/leds. The Bananapi M1 has three
LEDs connected to the RTL8211E PHY. Add the corresponding nodes to
the device tree.
Signed-off-by: Michael Klein <michael@fossekall.de>
Link: https://patch.msgid.link/20250508173657.8695-1-michael@fossekall.de
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree change for 6.16:
- A series from Alexander Stein that updates ls1021a-tqmals1021a device
tree mostly for display support inlcuding HDMI, LVDS and CDTech panel
- A change from Dario Binacchi to use pad config defines for i.MX23/28
device trees
- A i.MX7D change from Efe Can İçöz to include min and max voltage in
opp-microvolt
- A few patches from Fabio Estevam to fix dt-schema warnings
- A couple of changes from Krzysztof Kozlowski to align NAND and WIFI
node name with binings
- A clean-up change from Rob Herring to drop redundant CPU
"clock-latency"
* tag 'imx-dt-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: mxs: use padconfig macros
ARM: dts: imx7d: update opp-table voltages
ARM: dts: nxp: Align wifi node name with bindings
ARM: dts: imx6q-apalis: remove pcie-switch node
ARM: dts: ls1021a-tqmals1021a: change sound card model name
ARM: dts: ls1021a-tqmals1021a: Add overlay for CDTech DC44 RGB display
ARM: dts: ls1021a-tqmals1021a: Add overlay for CDTech FC21 RGB display
ARM: dts: ls1021a-tqmals1021a: Add LVDS overlay for Tianma TM070JVGH33
ARM: dts: ls1021a-tqmals1021a: Add HDMI overlay
ARM: dts: ls1021a-tqmals1021a: Add vcc-supply for spi-nor
ARM: dts: ls1021a-tqmals1021a: Fix license
ARM: dts: imx: Drop redundant CPU "clock-latency"
ARM: dts: imx51-digi-connectcore-som: Fix MMA7455 compatible
ARM: dts: nxp: Align NAND controller node name with bindings
ARM: dts: imx: Fix the iim compatible string
ARM: dts: imx31/imx6: Use flash as the NOR node name
Link: https://lore.kernel.org/r/20250512103858.50501-3-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into soc/dt
ARM: dts: omap updates for v6.16
* tag 'omap-for-v6.16/dt-signed' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap:
ARM: dts: am335x: Set wakeup-source for UART0
ARM: dts: omap4: panda: cleanup bluetooth
ARM: dts: omap4: panda: fix resources needed for Wifi
ARM: dts: nokia n900: remove useless io-channel-cells property
Link: https://lore.kernel.org/r/7hecwvrtmx.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
VIA/WonderMedia SoC timer can generate up to four interrupts corresponding
to four timer match registers (firing when the 32-bit freerunning clock
source counter matches either of the match registers, respectively).
List all four interrupts in device trees.
This also enables the system event timer to use a match register other
than 0, which can then in turn be used as a system watchdog (watchdog
function is not available on other channels)
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://lore.kernel.org/r/20250507-vt8500-timer-updates-v2-4-65e5d1b0855e@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
