summaryrefslogtreecommitdiff
path: root/arch/arm64/boot
AgeCommit message (Collapse)Author
2020-03-16arm64: dts: ls1046ardb: set RGMII interfaces to RGMII_ID modeMadalin Bucur
The correct setting for the RGMII ports on LS1046ARDB is to enable delay on both Rx and Tx so the interface mode used must be PHY_INTERFACE_MODE_RGMII_ID. Since commit 1b3047b5208a80 ("net: phy: realtek: add support for configuring the RX delay on RTL8211F") the Realtek 8211F PHY driver has control over the RGMII RX delay and it is disabling it for RGMII_TXID. The LS1046ARDB uses two such PHYs in RGMII_ID mode but in the device tree the mode was described as "rgmii". Changing the phy-connection-type to "rgmii-id" to address the issue. Fixes: 3fa395d2c48a ("arm64: dts: add LS1046A DPAA FMan nodes") Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-16arm64: dts: ls1043a-rdb: correct RGMII delay mode to rgmii-idMadalin Bucur
The correct setting for the RGMII ports on LS1043ARDB is to enable delay on both Rx and Tx so the interface mode used must be PHY_INTERFACE_MODE_RGMII_ID. Since commit 1b3047b5208a80 ("net: phy: realtek: add support for configuring the RX delay on RTL8211F") the Realtek 8211F PHY driver has control over the RGMII RX delay and it is disabling it for RGMII_TXID. The LS1043ARDB uses two such PHYs in RGMII_ID mode but in the device tree the mode was described as "rgmii_txid". This issue was not apparent at the time as the PHY driver took the same action for RGMII_TXID and RGMII_ID back then but it became visible (RX no longer working) after the above patch. Changing the phy-connection-type to "rgmii-id" to address the issue. Fixes: bf02f2ffe59c ("arm64: dts: add LS1043A DPAA FMan support") Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: "It looks like a decent sized set of fixes, but a lot of these are one liner off-by-one and similar type changes: 1) Fix netlink header pointer to calcular bad attribute offset reported to user. From Pablo Neira Ayuso. 2) Don't double clear PHY interrupts when ->did_interrupt is set, from Heiner Kallweit. 3) Add missing validation of various (devlink, nl802154, fib, etc.) attributes, from Jakub Kicinski. 4) Missing *pos increments in various netfilter seq_next ops, from Vasily Averin. 5) Missing break in of_mdiobus_register() loop, from Dajun Jin. 6) Don't double bump tx_dropped in veth driver, from Jiang Lidong. 7) Work around FMAN erratum A050385, from Madalin Bucur. 8) Make sure ARP header is pulled early enough in bonding driver, from Eric Dumazet. 9) Do a cond_resched() during multicast processing of ipvlan and macvlan, from Mahesh Bandewar. 10) Don't attach cgroups to unrelated sockets when in interrupt context, from Shakeel Butt. 11) Fix tpacket ring state management when encountering unknown GSO types. From Willem de Bruijn. 12) Fix MDIO bus PHY resume by checking mdio_bus_phy_may_suspend() only in the suspend context. From Heiner Kallweit" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits) net: systemport: fix index check to avoid an array out of bounds access tc-testing: add ETS scheduler to tdc build configuration net: phy: fix MDIO bus PM PHY resuming net: hns3: clear port base VLAN when unload PF net: hns3: fix RMW issue for VLAN filter switch net: hns3: fix VF VLAN table entries inconsistent issue net: hns3: fix "tc qdisc del" failed issue taprio: Fix sending packets without dequeueing them net: mvmdio: avoid error message for optional IRQ net: dsa: mv88e6xxx: Add missing mask of ATU occupancy register net: memcg: fix lockdep splat in inet_csk_accept() s390/qeth: implement smarter resizing of the RX buffer pool s390/qeth: refactor buffer pool code s390/qeth: use page pointers to manage RX buffer pool seg6: fix SRv6 L2 tunnels to use IANA-assigned protocol number net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed net/packet: tpacket_rcv: do not increment ring index on drop sxgbe: Fix off by one in samsung driver strncpy size arg net: caif: Add lockdep expression to RCU traversal primitive MAINTAINERS: remove Sathya Perla as Emulex NIC maintainer ...
2020-03-06arm64: dts: ls1043a: FMan erratum A050385Madalin Bucur
The LS1043A SoC is affected by the A050385 erratum stating that FMAN DMA read or writes under heavy traffic load may cause FMAN internal resource leak thus stopping further packet processing. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03Merge tag 'socfpga_dts_fix_for_v5.6_v2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes arm64: dts: agilex: fix gmac compatible - The compatible for Agilex GMAC should be "altr,socfpga-stmmac-a10-s10" * tag 'socfpga_dts_fix_for_v5.6_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: (578 commits) arm64: dts: socfpga: agilex: Fix gmac compatible Linux 5.6-rc4 KVM: VMX: check descriptor table exits on instruction emulation ext4: potential crash on allocation error in ext4_alloc_flex_bg_array() macintosh: therm_windtunnel: fix regression when instantiating devices jbd2: fix data races at struct journal_head kvm: x86: Limit the number of "kvm: disabled by bios" messages KVM: x86: avoid useless copy of cpufreq policy KVM: allow disabling -Werror KVM: x86: allow compiling as non-module with W=1 KVM: Pre-allocate 1 cpumask variable per cpu for both pv tlb and pv ipis KVM: Introduce pv check helpers KVM: let declaration of kvm_get_running_vcpus match implementation KVM: SVM: allocate AVIC data structures based on kvm_amd module parameter MAINTAINERS: Correct Cadence PCI driver path io_uring: fix 32-bit compatability with sendmsg/recvmsg net: dsa: mv88e6xxx: Fix masking of egress port mlxsw: pci: Wait longer before accessing the device after reset sfc: fix timestamp reconstruction at 16-bit rollover points vsock: fix potential deadlock in transport->release() ... Link: https://lore.kernel.org/r/20200303153509.28248-1-dinguyen@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2020-03-03arm64: dts: socfpga: agilex: Fix gmac compatibleLey Foon Tan
Fix gmac compatible string to "altr,socfpga-stmmac-a10-s10". Gmac for Agilex should use same compatible as Stratix 10. Fixes: 4b36daf9ada3 ("arm64: dts: agilex: Add initial support for Intel's Agilex SoCFPGA") Cc: stable@vger.kernel.org Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2020-03-02Merge tag 'amlogic-fixes' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/fixes Amlogic fixes for v5.6-rc * tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson: fix gxm-khadas-vim2 wifi arm64: dts: meson-sm1-sei610: add missing interrupt-names ARM: meson: Drop unneeded select of COMMON_CLK Link: https://lore.kernel.org/r/7hr1yc9cc1.fsf@baylibre.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-03-01arm64: dts: meson: fix gxm-khadas-vim2 wifiChristian Hewitt
before [6.418252] brcmfmac: F1 signature read @0x18000000=0x17224356 [6.435663] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2 [6.551259] brcmfmac: brcmf_sdiod_ramrw: membytes transfer failed [6.551275] brcmfmac: brcmf_sdio_verifymemory: error -84 on reading 2048 membytes at 0x00184000 [6.551352] brcmfmac: brcmf_sdio_download_firmware: dongle image file download failed after [6.657165] brcmfmac: F1 signature read @0x18000000=0x17224356 [6.660807] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2 [6.918643] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2 [6.918734] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available [6.922724] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4356/2 wl0: Jun 16 2015 14:25:06 version 7.35.184.r1 (TOB) (r559293) FWID 01-b22ae69c Fixes: adc52bf7ef16 ("arm64: dts: meson: fix mmc v2 chips max frequencies") Suggested-by: Art Nikpal <email2tema@gmail.com> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/1582212790-11402-1-git-send-email-christianshewitt@gmail.com
2020-02-29arm64: dts: meson-sm1-sei610: add missing interrupt-namesGuillaume La Roque
add missing "host-wakeup interrupt names Fixes: 30388cc07572 ("arm64: dts: meson-sm1-sei610: add gpio bluetooth interrupt") Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20200117133423.22602-1-glaroque@baylibre.com Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2020-02-24Merge tag 'imx-fixes-5.6' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.6: - Build v7_cpu_resume() unconditionally to fix system hang in case that suspend is disabled but cpuidle support is enabled. - Drop unexisting Ethernet PHY device from imx8qxp-mek board. - Fix SRAM compatible strings on imx6dl-colibri-eval-v3 board. - Fix imx-scu driver to make sure that all messages words are written sequentially. - A series from Leonard Crestez to fix i.MX SC API users, having all messages aligned on 4 bytes. - Fix eMMC supply for phycore-som board. - Drop bogus frequency setting from imx7-colibri SD/MMC device, so that HS200 mode starts working and delivers better performance. - Fix opp-supported-hw for i.MX7D to get consumer and industrial parts work with correct frequency settings. - Restore MDIO compatible to the correct one for LS1021A SoC. * tag 'imx-fixes-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx-scu: Align imx sc msg structs to 4 firmware: imx: Align imx_sc_msg_req_cpu_start to 4 firmware: imx: scu-pd: Align imx sc msg structs to 4 firmware: imx: misc: Align imx sc msg structs to 4 firmware: imx: scu: Ensure sequential TX ARM: dts: imx7-colibri: Fix frequency for sd/mmc arm64: dts: imx8qxp-mek: Remove unexisting Ethernet PHY ARM: dts: imx6dl-colibri-eval-v3: fix sram compatible properties ARM: dts: ls1021a: Restore MDIO compatible to gianfar ARM: dts: imx7d: fix opp-supported-hw ARM: imx: build v7_cpu_resume() unconditionally ARM: dts: imx6: phycore-som: fix emmc supply Link: https://lore.kernel.org/r/20200224120334.GH27688@dragon Signed-off-by: Olof Johansson <olof@lixom.net>
2020-02-19arm64: dts: imx8qxp-mek: Remove unexisting Ethernet PHYFabio Estevam
There is only on Ethernet port and one Ethernet PHY on imx8qxp-mek. Remove the unexisting ethphy1 port. This fixes a run-time warning: mdio_bus 5b040000.ethernet-1: MDIO device at address 1 is missing. Fixes: fdea904e85e1 ("arm64: dts: imx: add imx8qxp mek support") Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-11Merge tag 'juno-fix-5.6' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes ARMv8 Juno/Fast Models fix for v5.6 A single fix for PCI interrupt-mapping on FVP Rev C model. This is present since the platform was added. This fix is needed to get VFIO working correctly on this model. * tag 'juno-fix-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: arm64: dts: fast models: Fix FVP PCI interrupt-map property Link: https://lore.kernel.org/r/20200205183423.GF38466@bogus Signed-off-by: Olof Johansson <olof@lixom.net>
2020-02-08Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms: - Nvidia: Fuse support for Tegra194, continued memory controller pieces for Tegra30 - NXP/FSL: Refactorings of QuickEngine drivers to support ARM/ARM64/PPC - NXP/FSL: i.MX8MP SoC driver pieces - TI Keystone: ring accelerator driver - Qualcomm: SCM driver cleanup/refactoring + support for new SoCs. - Xilinx ZynqMP: feature checking interface for firmware. Mailbox communication for power management - Overall support patch set for cpuidle on more complex hierarchies (PSCI-based) and misc cleanups, refactorings of Marvell, TI, other platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits) drivers: soc: xilinx: Use mailbox IPI callback dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists MAINTAINERS: Add brcmstb PCIe controller entry soc/tegra: fuse: Unmap registers once they are not needed anymore soc/tegra: fuse: Correct straps' address for older Tegra124 device trees soc/tegra: fuse: Warn if straps are not ready soc/tegra: fuse: Cache values of straps and Chip ID registers memory: tegra30-emc: Correct error message for timed out auto calibration memory: tegra30-emc: Firm up hardware programming sequence memory: tegra30-emc: Firm up suspend/resume sequence soc/tegra: regulators: Do nothing if voltage is unchanged memory: tegra: Correct reset value of xusb_hostr soc/tegra: fuse: Add APB DMA dependency for Tegra20 bus: tegra-aconnect: Remove PM_CLK dependency dt-bindings: mediatek: add MT6765 power dt-bindings soc: mediatek: cmdq: delete not used define memory: tegra: Add support for the Tegra194 memory controller memory: tegra: Only include support for enabled SoCs memory: tegra: Support DVFS on Tegra186 and later ...
2020-02-08Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM Device-tree updates from Olof Johansson: "New SoCs: - Atmel/Microchip SAM9X60 (ARM926 SoC) - OMAP 37xx gets split into AM3703/AM3715/DM3725, who are all variants of it with different GPU/media IP configurations. - ST stm32mp15 SoCs (1-2 Cortex-A7, CAN, GPU depending on SKU) - ST Ericsson ab8505 (variant of ab8500) and db8520 (variant of db8500) - Unisoc SC9863A SoC (8x Cortex-A55 mobile chipset w/ GPU, modem) - Qualcomm SC7180 (8-core 64bit SoC, unnamed CPU class) New boards: - Allwinner: + Emlid Neutis SoM (H3 variant) + Libre Computer ALL-H3-IT + PineH64 Model B - Amlogic: + Libretech Amlogic GX PC (s905d and s912-based variants) - Atmel/Microchip: + Kizboxmini, sam9x60 EK, sama5d27 Wireless SOM (wlsom1) - Marvell: + Armada 385-based SolidRun Clearfog GTR - NXP: + Gateworks GW59xx boards based on i.MX6/6Q/6QDL + Tolino Shine 3 eBook reader (i.MX6sl) + Embedded Artists COM (i.MX7ULP) + SolidRun CLearfog CX/ITX and HoneyComb (LX2160A-based systems) + Google Coral Edge TPU (i.MX8MQ) - Rockchip: + Radxa Dalang Carrier (supports rk3288 and rk3399 SOMs) + Radxa Rock Pi N10 (RK3399Pro-based) + VMARC RK3399Pro SOM - ST: + Reference boards for stm32mp15 - ST Ericsson: + Samsung Galaxy S III mini (GT-I8190) + HREF520 reference board for DB8520 - TI OMAP: + Gen1 Amazon Echo (OMAP3630-based) - Qualcomm: + Inforce 6640 Single Board Computer (msm8996-based) + SC7180 IDP (SC7180-based)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (623 commits) dt-bindings: fix compilation error of the example in marvell,mmp3-hsic-phy.yaml arm64: dts: ti: k3-am654-base-board: Add CSI2 OV5640 camera arm64: dts: ti: k3-am65-main Add CAL node arm64: dts: ti: k3-j721e-main: Add McASP nodes arm64: dts: ti: k3-am654-main: Add McASP nodes arm64: dts: ti: k3-j721e: DMA support arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navss arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS arm64: dts: ti: k3-am65: DMA support arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss arm64: dts: ti: k3-am65-main: Correct main NAVSS representation ARM: dts: aspeed: rainier: Add UCD90320 power sequencer ARM: dts: aspeed: rainier: Switch PSUs to unknown version arm64: dts: rockchip: Kill off "simple-panel" compatibles ARM: dts: rockchip: Kill off "simple-panel" compatibles arm64: dts: rockchip: rename dwmmc node names to mmc ARM: dts: rockchip: rename dwmmc node names to mmc arm64: dts: exynos: Rename Samsung and Exynos to lowercase arm64: dts: uniphier: add reset-names to NAND controller node ...
2020-01-27Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: "The changes are a real mixed bag this time around. The only scary looking one from the diffstat is the uapi change to asm-generic/mman-common.h, but this has been acked by Arnd and is actually just adding a pair of comments in an attempt to prevent allocation of some PROT values which tend to get used for arch-specific purposes. We'll be using them for Branch Target Identification (a CFI-like hardening feature), which is currently under review on the mailing list. New architecture features: - Support for Armv8.5 E0PD, which benefits KASLR in the same way as KPTI but without the overhead. This allows KPTI to be disabled on CPUs that are not affected by Meltdown, even is KASLR is enabled. - Initial support for the Armv8.5 RNG instructions, which claim to provide access to a high bandwidth, cryptographically secure hardware random number generator. As well as exposing these to userspace, we also use them as part of the KASLR seed and to seed the crng once all CPUs have come online. - Advertise a bunch of new instructions to userspace, including support for Data Gathering Hint, Matrix Multiply and 16-bit floating point. Kexec: - Cleanups in preparation for relocating with the MMU enabled - Support for loading crash dump kernels with kexec_file_load() Perf and PMU drivers: - Cleanups and non-critical fixes for a couple of system PMU drivers FPU-less (aka broken) CPU support: - Considerable fixes to support CPUs without the FP/SIMD extensions, including their presence in heterogeneous systems. Good luck finding a 64-bit userspace that handles this. Modern assembly function annotations: - Start migrating our use of ENTRY() and ENDPROC() over to the new-fangled SYM_{CODE,FUNC}_{START,END} macros, which are intended to aid debuggers Kbuild: - Cleanup detection of LSE support in the assembler by introducing 'as-instr' - Remove compressed Image files when building clean targets IP checksumming: - Implement optimised IPv4 checksumming routine when hardware offload is not in use. An IPv6 version is in the works, pending testing. Hardware errata: - Work around Cortex-A55 erratum #1530923 Shadow call stack: - Work around some issues with Clang's integrated assembler not liking our perfectly reasonable assembly code - Avoid allocating the X18 register, so that it can be used to hold the shadow call stack pointer in future ACPI: - Fix ID count checking in IORT code. This may regress broken firmware that happened to work with the old implementation, in which case we'll have to revert it and try something else - Fix DAIF corruption on return from GHES handler with pseudo-NMIs Miscellaneous: - Whitelist some CPUs that are unaffected by Spectre-v2 - Reduce frequency of ASID rollover when KPTI is compiled in but inactive - Reserve a couple of arch-specific PROT flags that are already used by Sparc and PowerPC and are planned for later use with BTI on arm64 - Preparatory cleanup of our entry assembly code in preparation for moving more of it into C later on - Refactoring and cleanup" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (73 commits) arm64: acpi: fix DAIF manipulation with pNMI arm64: kconfig: Fix alignment of E0PD help text arm64: Use v8.5-RNG entropy for KASLR seed arm64: Implement archrandom.h for ARMv8.5-RNG arm64: kbuild: remove compressed images on 'make ARCH=arm64 (dist)clean' arm64: entry: Avoid empty alternatives entries arm64: Kconfig: select HAVE_FUTEX_CMPXCHG arm64: csum: Fix pathological zero-length calls arm64: entry: cleanup sp_el0 manipulation arm64: entry: cleanup el0 svc handler naming arm64: entry: mark all entry code as notrace arm64: assembler: remove smp_dmb macro arm64: assembler: remove inherit_daif macro ACPI/IORT: Fix 'Number of IDs' handling in iort_id_map() mm: Reserve asm-generic prot flags 0x10 and 0x20 for arch use arm64: Use macros instead of hard-coded constants for MAIR_EL1 arm64: Add KRYO{3,4}XX CPU cores to spectre-v2 safe list arm64: kernel: avoid x18 in __cpu_soft_restart arm64: kvm: stop treating register x18 as caller save arm64/lib: copy_page: avoid x18 register in assembler code ...
2020-01-24Merge tag 'ti-k3-soc-for-v5.6-part2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into arm/dt Texas Instruments K3 SoC family changes for 5.6, part 2. - Add DMA nodes for am65x and j721e - Add McASP nodes for am65x and j721e, showcasing the DMA usage - Add CAL node for am65x - Add OV5640 camera support for am65x * tag 'ti-k3-soc-for-v5.6-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux: arm64: dts: ti: k3-am654-base-board: Add CSI2 OV5640 camera arm64: dts: ti: k3-am65-main Add CAL node arm64: dts: ti: k3-j721e-main: Add McASP nodes arm64: dts: ti: k3-am654-main: Add McASP nodes arm64: dts: ti: k3-j721e: DMA support arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navss arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS arm64: dts: ti: k3-am65: DMA support arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss arm64: dts: ti: k3-am65-main: Correct main NAVSS representation Link: https://lore.kernel.org/r/83546942-6215-9c3a-16cd-be7e7c000c0e@ti.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-24Merge tag 'uniphier-dt64-v5.6' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into arm/dt UniPhier ARM64 SoC DT updates for v5.6 - Add reset-names to NAND controller node * tag 'uniphier-dt64-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier: arm64: dts: uniphier: add reset-names to NAND controller node Link: https://lore.kernel.org/r/CAK7LNASehDHWgOug=Rz0uBBSP2ntJnNLiarfSdj97tZu+OXLkA@mail.gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-24arm64: dts: ti: k3-am654-base-board: Add CSI2 OV5640 cameraBenoit Parrot
Add support for the OV5640 CSI camera: - add the OV5640 nodes - add the CAL node linkage - enable CAL node Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-01-24arm64: dts: ti: k3-am65-main Add CAL nodeBenoit Parrot
Add CAL dtsi node for AM654 device. Including proper power-domains and clock properties. Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-01-24arm64: dts: ti: k3-j721e-main: Add McASP nodesPeter Ujfalusi
Add the nodes for McASP 0-11 and keep them disabled because several required properties are not present as they are board specific. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-01-24arm64: dts: ti: k3-am654-main: Add McASP nodesPeter Ujfalusi
Add the nodes for McASP 0-2 and keep them disabled because several required properties are not present as they are board specific. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-01-24arm64: dts: ti: k3-j721e: DMA supportPeter Ujfalusi
Add the ringacc and udmap nodes for main and mcu NAVSS. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-01-24arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navssPeter Ujfalusi
Secure proxy (NAVSS0_SEC_PROXY0) and smmu (NAVSS0_TCU) is part of the Navigator Subsystem. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-01-24arm64: dts: ti: k3-j721e-main: Correct main NAVSS representationPeter Ujfalusi
NAVSS is a subsystem containing different IPs, it is not really a bus. Change the compatible from "simple-bus" to "simple-mfd" to reflect that. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-01-24arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSSPeter Ujfalusi
On am654 the MAIN NAVSS base address was 0x30800000, but in j721e it is at 0x30000000 Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-01-24arm64: dts: ti: k3-am65: DMA supportPeter Ujfalusi
Add the ringacc and udmap nodes for main and mcu NAVSS. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-01-24arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navssPeter Ujfalusi
Secure proxy (NAVSS0_SEC_PROXY0) is part of the Navigator Subsystem. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-01-24arm64: dts: ti: k3-am65-main: Correct main NAVSS representationPeter Ujfalusi
NAVSS is a subsystem containing different IPs, it is not really a bus. Change the compatible from "simple-bus" to "simple-mfd" to reflect that. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-01-23arm64: dts: fast models: Fix FVP PCI interrupt-map propertyMarc Zyngier
The interrupt map for the FVP's PCI node is missing the parent-unit-address cells for each of the INTx entries, leading to the kernel code failing to parse the entries correctly. Add the missing zero cells, which are pretty useless as far as the GIC is concerned, but that the spec requires. This allows INTx to be usable on the model, and VFIO to work correctly. Fixes: fa083b99eb28 ("arm64: dts: fast models: Add DTS fo Base RevC FVP") Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2020-01-21Merge tag 'zynqmp-dt-for-v5.6' of https://github.com/Xilinx/linux-xlnx into ↵Olof Johansson
arm/dt arm64: dts: zynqmp: DT changes for v5.6 - Switch from fixed to firmware based clock driver - Wire power domain driver - Wire all ina226 chips through IIO and IIO hwmon drivers - Add missing dr_mode property to usb nodes - Use gpio-line-names property instead of comments - Use clock-output-names for si570 differentiation - Minor DT fixes * tag 'zynqmp-dt-for-v5.6' of https://github.com/Xilinx/linux-xlnx: (21 commits) arm64: zynqmp: Add label property to all ina226 on zcu106 arm64: zynqmp: Enable iio-hwmon for ina226 on zcu106 arm64: zynqmp: Add label property to all ina226 on zcu102 arm64: zynqmp: Enable iio-hwmon for ina226 on zcu102 arm64: zynqmp: Add label property to all ina226 on zcu111 arm64: zynqmp: Enable iio-hwmon for ina226 on zcu111 arm64: zynqmp: Enable iio-hwmon for ina226 on zcu100 arm64: zynqmp: Setup default number of chipselects for zcu100 arm64: zynqmp: Remove broken-cd from zcu100-revC arm64: zynqmp: Fix the si570 clock frequency on zcu111 arm64: zynqmp: Setup clock-output-names for si570 chips arm64: zynqmp: Turn comment to gpio-line-names arm64: zynqmp: Fix address for tca6416_u97 chip on zcu104 arm64: zynqmp: Remove addition number in node name arm64: zynqmp: Use ethernet-phy as node name for ethernet phys arm64: dts: xilinx: Add the power nodes for zynqmp arm64: dts: xilinx: Remove dtsi for fixed clock arm64: dts: xilinx: Add the clock nodes for zynqmp arm64: zynqmp: Add dr_mode property to usb node arm64: dts: zynqmp: Use decimal values for drm-clock properties ... Link: https://lore.kernel.org/r/c70d2efa-9ee2-a764-5248-0e5bfbf29f8a@monstr.eu Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-21arm64: kbuild: remove compressed images on 'make ARCH=arm64 (dist)clean'Dirk Behme
Since v4.3-rc1 commit 0723c05fb75e44 ("arm64: enable more compressed Image formats"), it is possible to build Image.{bz2,lz4,lzma,lzo} AArch64 images. However, the commit missed adding support for removing those images on 'make ARCH=arm64 (dist)clean'. Fix this by adding them to the target list. Make sure to match the order of the recipes in the makefile. Cc: stable@vger.kernel.org # v4.3+ Fixes: 0723c05fb75e44 ("arm64: enable more compressed Image formats") Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-01-19Merge tag 'v5.6-rockchip-dts64-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt DSI display for px30 evaluation board and a number of cleanups accross multiple socs. * tag 'v5.6-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Kill off "simple-panel" compatibles arm64: dts: rockchip: rename dwmmc node names to mmc arm64: dts: rockchip: hook up the px30-evb dsi display arm64: dts: rockchip: Enable sdio0 and uart0 on rk3399-roc-pc-mezzanine arm64: dts: rockchip: add reg property to brcmf sub-nodes arm64: dts: rockchip: fix dwmmc clock name for rk3308 arm64: dts: rockchip: fix dwmmc clock name for px30 Link: https://lore.kernel.org/r/7641353.lIegmeFAIi@phil Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-18arm64: dts: rockchip: Kill off "simple-panel" compatiblesRob Herring
"simple-panel" is a Linux driver and has never been an accepted upstream compatible string, so remove it. Cc: Heiko Stuebner <heiko@sntech.de> Cc: linux-rockchip@lists.infradead.org Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200117230851.25434-1-robh@kernel.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-01-18arm64: dts: rockchip: rename dwmmc node names to mmcJohan Jonker
Current dts files with 'dwmmc' nodes are manually verified. In order to automate this process rockchip-dw-mshc.txt has to be converted to yaml. In the new setup rockchip-dw-mshc.yaml will inherit properties from mmc-controller.yaml and synopsys-dw-mshc-common.yaml. 'dwmmc' will no longer be a valid name for a node, so change them all to 'mmc' Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200115185244.18149-2-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-01-17arm64: dts: exynos: Rename Samsung and Exynos to lowercaseKrzysztof Kozlowski
Fix up inconsistent usage of upper and lowercase letters in "Samsung" and "Exynos" names. "SAMSUNG" and "EXYNOS" are not abbreviations but regular trademarked names. Therefore they should be written with lowercase letters starting with capital letter. The lowercase "Exynos" name is promoted by its manufacturer Samsung Electronics Co., Ltd., in advertisement materials and on website. Although advertisement materials usually use uppercase "SAMSUNG", the lowercase version is used in all legal aspects (e.g. on Wikipedia and in privacy/legal statements on https://www.samsung.com/semiconductor/privacy-global/). Link: https://lore.kernel.org/r/20200117190305.5257-1-krzk@kernel.org Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-17Merge tag 'ti-k3-soc-for-v5.6' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into arm/dt Texas Instruments K3 SoC family changes for 5.6 - Add missing power domains for smmu for J721e - Add I2C, ADC, OSPI and UFS nodes for J721e - Add OSPI and MCU syscon nodes for am65x - Add IRQ line for GPIO expander on am65x * tag 'ti-k3-soc-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux: arm64: dts: ti: k3-j721e-main: Add missing power-domains for smmu arm64: dts: ti: k3-am65-mcu: add system control module node arm64: dts: k3-am654-base-board: Add IRQ line for GPIO expander arm64: dts: ti: k3-am65: Add OSPI DT node arm64: dts: ti: k3-j721e: Add DT nodes for few peripherials Link: https://lore.kernel.org/r/c5b74bfc-f2f0-1b72-4a3c-4c1d478a023a@ti.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-18arm64: dts: uniphier: add reset-names to NAND controller nodeMasahiro Yamada
The Denali NAND controller IP has separate reset control for the controller core and registers. Add the reset-names, and one more phandle accordingly. This is the approved DT-binding. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-01-17arm64: dts: ti: k3-j721e-main: Add missing power-domains for smmuLokesh Vutla
Add power-domains entry for smmu, so that the it is accessible as long as the driver is active. Without this device shutdown is throwing the below warning: "[ 44.736348] arm-smmu-v3 36600000.smmu: failed to clear cr0" Reported-by: Suman Anna <s-anna@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-01-17arm64: dts: ti: k3-am65-mcu: add system control module nodeGrygorii Strashko
The MCU System control module support is added to the device tree to allow drivers to access to their System control module registers. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-01-17arm64: dts: k3-am654-base-board: Add IRQ line for GPIO expanderVignesh Raghavendra
Add IRQ line for IO expander present on wkup_i2c bus on AM654 EVM Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-01-17arm64: dts: ti: k3-am65: Add OSPI DT nodeVignesh Raghavendra
AM654 SoC has two Cadence OSPI controller instances under Flash subsystem (FSS). Add DT nodes for the same. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-01-17arm64: dts: ti: k3-j721e: Add DT nodes for few peripherialsVignesh Raghavendra
Enable I2Cs, ADCs, OSPIs and UFS peripherals present on J721e. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2020-01-16arm64: dts: bitmain: Source common clock for UART controllersManivannan Sadhasivam
Remove fixed clock and source common clock for UART controllers. Link: https://lore.kernel.org/r/20200114040311.6599-3-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-16arm64: dts: bitmain: Add clock controller support for BM1880 SoCManivannan Sadhasivam
Add clock controller support for Bitmain BM1880 SoC. Link: https://lore.kernel.org/r/20200114040311.6599-2-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-16Merge tag 'amlogic-dt64' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: Amlogic updates for v5.6 - new boards: libretech-pc (S912 and S905D versions) - new board: Videostrong KII Pro - A1: add reset controller * tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson: add audio fifo depths arm64: dts: meson: add libretech-pc boards support dt-bindings: arm: amlogic: add libretech-pc bindings arm64: dts: meson: gxl: add i2c C pins arm64: dts: meson-sm1: add video decoder compatible arm64: dts: meson-g12-common: add video decoder node arm64: dts: meson-gxbb: add support for Videostrong KII Pro dt-bindings: arm: amlogic: add Videostrong KII Pro bindings dt-bindings: Add vendor prefix for Videostrong arm64: dts: meson: a1: add pinctrl controller support arm64: dts: meson: add reset controller for Meson-A1 SoC Link: https://lore.kernel.org/r/7hsgkidi3k.fsf@baylibre.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-16Merge tag 'qcom-arm64-for-5.6' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM64 DT updates for v5.6 * Align SDM845 firmware paths with linux-firmware * Make WiFi work on Dragonboard845c * Wire up wakeup controller for SDM845 * Critical thermal interrupt support for SDM845, MSM8996 and MSM8998 * Enable UFS for SM8150 * Add remoteproc enablers and nodes for SM8150 * Add CPUfreq for SM8150 * Add RPMH power-domain node for SM8150 * Cleanup and refactor MSM8996 dts structure * Add initial Inforce Computing IFC6640 dts * Increase MSM8996 core voltage * Fix MSM8996 USB phy settings * Add missing alias for BLSP UART in MSM8998 MTP * Add remoteproc nodes for ADSP, modem and sensor core for MSM8998 * Enable WiFI for MSM8998 * Introduce the SC7180 platform and the IDP development board * Add CPUfreq, QUPs, USB, remoteproc etc for SC7180 * Enable USB OTG for Dragonboard 410c * Add vibrator motor node for PM8916 * Properly specify APCS clocks for MSM8916 * Add CPR and HFPLL for QCS404 * Enable full CPUfreq (with AVS) for QCS404 * tag 'qcom-arm64-for-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (88 commits) arm64: dts: qcom: sdm845: move gpu zap nodes to per-device dts arm64: dts: qcom: sm8150: Hard code rpmhpd constants arm64: dts: apq8096-db820c: Fix VDD core voltage arm64: dts: qcom: qcs404-evb: Set vdd_apc regulator in high power mode arm64: dts: qcom: msm8998-mtp: Add alias for blsp1_uart3 arm64: dts: qcom: sc7180: Add critical interrupt and cooling maps for TSENS in SC7180 arm64: dts: qcom: msm8996: Fix venus iommu nodename error arm64: dts: qcom: sdm845: add the ufs reset arm64: dts: qcom: sm8150: Fix UFS phy register size arm64: dts: qcom: sm8150-mtp: Add UFS gpio reset arm64: dts: qcom: qcs404: Add CPR and populate OPP table arm64: dts: qcom: qcs404: Add DVFS support arm64: dts: qcom: qcs404: Add the clocks for APCS mux/divider arm64: dts: qcom: qcs404: Add HFPLL node arm64: dts: qcom: msm8916: Add the clocks for the APCS mux/divider arm64: dts: qcom: sc7180: Add rpmh power-domain node arm64: dts: pm8004: Add SPMI regulator and add phandles to lsids arm64: dts: msm8998: thermal: Add critical interrupt support arm64: dts: msm8996: thermal: Add critical interrupt support arm64: dts: qcom: db845c: Move remoteproc firmware to sdm845 ... Link: https://lore.kernel.org/r/20200113204225.GB3325@yoga Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-16Merge tag 'v5.5-next-dts64' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt mt8173: - add dynamic power coefficient to the cpu clusters - add jpeg decoder node mt8183: - add node for the Global Command Engine (gce) - add reset cells to the infracfg node * tag 'v5.5-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm64: dts: mt8183: add reset-cells in infracfg arm64: dts: mt8173: add Mediatek JPEG Codec arm64: dts: add gce node for mt8183 arm64: dts: mt8173: Add dynamic power node. Link: https://lore.kernel.org/r/46c1a244-3f74-8069-6600-8ced02775677@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-16Merge tag 'sunxi-dt-for-5.6-2' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt This is our usual set of DT patches for the Allwinner SoCs. It's fairly big this time, but the highlights are: - Enable cpufreq and CPU thermal throttling on the A64 - CLK_CPUX macro usage removed (changed from first pull request) - CSI0 support on the R40 - CSI1 support on the A10 and A20 - SPI support on the R40 - PMU support on the H3, H5, H6 and R40 - MIPI-DSI support on the A64 - PWM support on the H6 - Thermal sensor on the A64, A83t, H3, H5, H6 and R40 - More DT schemas fixes and conversions - New boards: LibreComputer ALL-H5-CC H5, LibreComputer ALL-H3-IT H5, Pine64 H64 Model B, Neutis N5H3 * tag 'sunxi-dt-for-5.6-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (52 commits) arm64: dts: allwinner: a64: enable DVFS arm64: dts: allwinner: a64: add dtsi with CPU operating points arm64: dts: allwinner: a64: add cooling maps and thermal tripping points arm64: dts: allwinner: a64: add CPU clock to CPU0-3 nodes arm64: dts: allwinner: sun50i-a64: Use macros for newly exported clocks ARM: dts: sunxi: Use macros for references to CCU clocks arm64: dts: allwinner: h5: Add Libre Computer ALL-H5-CC H5 board ARM: dts: sun8i: R40: Add SPI controllers nodes and pinmuxes arm64: dts: allwinner: a64: pinebook: Fix lid wakeup ARM: dts: sun8i: r40: Add device node for CSI0 ARM: dts: sun7i: Add CSI1 controller and pinmux options ARM: dts: sun4i: Add CSI1 controller and pinmux options ARM: dts: sunxi: Add missing LVDS resets and clocks ARM: dts: sun8i: r40: Use tcon top clock index macros ARM: dts: sun8i: R40: Add PMU node ARM: dts: sun8i: R40: Upgrade GICC reg size to 8K arm64: dts: allwinner: h6: Add thermal sensor and thermal zones ARM: dts: sunxi: Add Libre Computer ALL-H3-IT H5 board arm64: dts: allwinner: a64: Add MIPI DSI pipeline arm64: dts: allwinner: a64: Add thermal sensors and thermal zones ... Link: https://lore.kernel.org/r/20200113095555.GA29848@wens.csie.org Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-16Merge tag 'imx-dt64-5.6' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX arm64 device tree update for 5.6: - New board support: i.MX8MQ based Thor96 board, Google i.MX8MQ Phanbell board, LX2160A based Solidrun Clearfog CX and Honeycomb boards. - Add eLCDIF controller and missing SAI nodes for i.MX8MQ SoC. - Add Crypto CAAM support for i.MX8MM and i.MX8MN. - Drop unneeded "simple-bus" from anatop node on i.MX8MM and i.MX8MN. - Drop unused/undocumented "fsl,aips-bus" and "fsl,imx8mq-aips-bus" compatibles from i.MX8M SoCs. - Add DDR controller nodes for i.MX8M devices. - Add EEPROM description for imx8mq-hummingboard-pulse and imx8mq-sr-som boards. - Enable USB1 and TypeC support for imx8mn-evk board. - Add FlexSPI and QSPI support for a few Layerscape SoCs and boards. - Add External MDIO1 node and the two RGMII PHYs connected on LX2160A. - Add missing SAI devices and set SAIs into async mode on LS1028A. - Other random device additions and enhancement for various platforms. * tag 'imx-dt64-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (35 commits) arm64: dts: imx8mn: Memory node should be in board DT arm64: dts: imx8mm: Memory node should be in board DT arm64: dts: imx8mn: add crypto node arm64: dts: imx8mq-hummingboard-pulse: add eeprom description arm64: dts: imx8mq-sr-som: add eeprom description arm64: dts: ls208xa: Update qspi node properties for LS2088ARDB arm64: dts: freescale: Add devicetree support for Thor96 board arm64: dts: imx8mq-librem5-devkit: add accelerometer and gyro sensor arm64: dts: imx8mm: Add Crypto CAAM support arm64: dts: freescale: add initial support for Google i.MX 8MQ Phanbell arm64: dts: ls1028a-rdb: enable emmc hs400 mode arm64: dts: ls1028a: Update edma compatible to fit eDMA driver arm64: dts: imx8m: drop "fsl,aips-bus" and "fsl,imx8mq-aips-bus" arm64: dts: imx8mm: Add missing mux options for UART1 and UART2 signals arm64: dts: lx2160a: add dts for CEX7 platforms arm64: dts: lx2160a: add emdio2 node arm64: dts: ls1028a: put SAIs into async mode arm64: dts: ls1028a: add missing sai nodes arm64: dts: imx8mn-evk: enable usb1 and typec support arm64: dts: imx8mn: Remove setting for IMX8MN_CLK_USB_CORE_REF ... Link: https://lore.kernel.org/r/20200113034006.17430-5-shawnguo@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-16Merge tag 'mvebu-dt64-5.6-1' of git://git.infradead.org/linux-mvebu into arm/dtOlof Johansson
mvebu dt64 for 5.6 (part 1) micro-DPU (uDPU) board changes (Armada 3270 based board): - Fix broken ethernet - Remove i2c-fast-mode property - Indicate that SFP cages support 3W modules SolidRun Clearfog GT 8K (Armada 8040 base board): - Fix switch cpu port node * tag 'mvebu-dt64-5.6-1' of git://git.infradead.org/linux-mvebu: arm64: dts: marvell: clearfog-gt-8k: fix switch cpu port node arm64: dts: uDPU: SFP cages support 3W modules arm64: dts: uDPU: remove i2c-fast-mode arm64: dts: uDPU: fix broken ethernet Link: https://lore.kernel.org/r/871rs53nu5.fsf@FE-laptop Signed-off-by: Olof Johansson <olof@lixom.net>
generated by cgit (git 2.34.1) at 2024-05-30 14:55:14 +0000