summaryrefslogtreecommitdiff
path: root/arch/arm64/boot
AgeCommit message (Collapse)Author
12 daysMerge tag 'mm-nonmm-stable-2025-05-31-15-28' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - "hung_task: extend blocking task stacktrace dump to semaphore" from Lance Yang enhances the hung task detector. The detector presently dumps the blocking tasks's stack when it is blocked on a mutex. Lance's series extends this to semaphores - "nilfs2: improve sanity checks in dirty state propagation" from Wentao Liang addresses a couple of minor flaws in nilfs2 - "scripts/gdb: Fixes related to lx_per_cpu()" from Illia Ostapyshyn fixes a couple of issues in the gdb scripts - "Support kdump with LUKS encryption by reusing LUKS volume keys" from Coiby Xu addresses a usability problem with kdump. When the dump device is LUKS-encrypted, the kdump kernel may not have the keys to the encrypted filesystem. A full writeup of this is in the series [0/N] cover letter - "sysfs: add counters for lockups and stalls" from Max Kellermann adds /sys/kernel/hardlockup_count and /sys/kernel/hardlockup_count and /sys/kernel/rcu_stall_count - "fork: Page operation cleanups in the fork code" from Pasha Tatashin implements a number of code cleanups in fork.c - "scripts/gdb/symbols: determine KASLR offset on s390 during early boot" from Ilya Leoshkevich fixes some s390 issues in the gdb scripts * tag 'mm-nonmm-stable-2025-05-31-15-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (67 commits) llist: make llist_add_batch() a static inline delayacct: remove redundant code and adjust indentation squashfs: add optional full compressed block caching crash_dump, nvme: select CONFIGFS_FS as built-in scripts/gdb/symbols: determine KASLR offset on s390 during early boot scripts/gdb/symbols: factor out pagination_off() scripts/gdb/symbols: factor out get_vmlinux() kernel/panic.c: format kernel-doc comments mailmap: update and consolidate Casey Connolly's name and email nilfs2: remove wbc->for_reclaim handling fork: define a local GFP_VMAP_STACK fork: check charging success before zeroing stack fork: clean-up naming of vm_stack/vm_struct variables in vmap stacks code fork: clean-up ifdef logic around stack allocation kernel/rcu/tree_stall: add /sys/kernel/rcu_stall_count kernel/watchdog: add /sys/kernel/{hard,soft}lockup_count x86/crash: make the page that stores the dm crypt keys inaccessible x86/crash: pass dm crypt keys to kdump kernel Revert "x86/mm: Remove unused __set_memory_prot()" crash_dump: retrieve dm crypt keys in kdump kernel ...
12 daysMerge tag 'soc-dt-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull SoC devicetree updates from Arnd Bergmann: "There are 11 newly supported SoCs, but these are all either new variants of existing designs, or straight reuses of the existing chip in a new package: - RK3562 is a new chip based on the old Cortex-A53 core, apparently a low-cost version of the Cortex-A55 based RK3568/RK3566. - NXP i.MX94 is a minor variation of i.MX93/i.MX95 with a different set of on-chip peripherals. - Renesas RZ/V2N (R9A09G056) is a new member of the larger RZ/V2 family - Amlogic S6/S7/S7D - Samsung Exynos7870 is an older chip similar to Exynos7885 - WonderMedia wm8950 is a minor variation on the wm8850 chip - Amlogic s805y is almost idential to s805x - Allwinner A523 is similar to A527 and T527 - Qualcomm MSM8926 is a variant of MSM8226 - Qualcomm Snapdragon X1P42100 is related to R1E80100 There are also 65 boards, including reference designs for the chips above, this includes - 12 new boards based on TI K3 series chips, most of them from Toradex - 10 devices using Rockchips RK35xx and PX30 chips - 2 phones and 2 laptops based on Qualcomm Snapdragon designs - 10 NXP i.MX8/i.MX9 boards, mostly for embedded/industrial uses - 3 Samsung Galaxy phones based on Exynos7870 - 5 Allwinner based boards using a variety of ARMv8 chips - 9 32-bit machines, each based on a different SoC family Aside from the new hardware, there is the usual set of cleanups and newly added hardware support on existing machines, for a total of 965 devicetree changesets" * tag 'soc-dt-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (956 commits) MAINTAINERS, mailmap: update Sven Peter's email address arm64: dts: renesas: rzg3e-smarc-som: Reduce I2C2 clock frequency arm64: dts: nuvoton: Add pinctrl ARM: dts: samsung: sp5v210-aries: Align wifi node name with bindings arm64: dts: blaize-blzp1600: Enable GPIO support dt-bindings: clock: socfpga: convert to yaml arm64: dts: rockchip: move rk3562 pinctrl node outside the soc node arm64: dts: rockchip: fix rk3562 pcie unit addresses arm64: dts: rockchip: move rk3528 pinctrl node outside the soc node arm64: dts: rockchip: remove a double-empty line from rk3576 core dtsi arm64: dts: rockchip: move rk3576 pinctrl node outside the soc node arm64: dts: rockchip: fix rk3576 pcie unit addresses arm64: dts: rockchip: Drop assigned-clock* from cpu nodes on rk3588 arm64: dts: rockchip: Add missing SFC power-domains to rk3576 Revert "arm64: dts: mediatek: mt8390-genio-common: Add firmware-name for scp0" arm64: dts: mediatek: mt8188: Address binding warnings for MDP3 nodes arm64: dts: mt6359: Rename RTC node to match binding expectations arm64: dts: mt8365-evk: Add goodix touchscreen support arm64: dts: mediatek: mt8188: Add missing #reset-cells property arm64: dts: airoha: en7581: Add PCIe nodes to EN7581 SoC evaluation board ...
13 daysMerge tag 'renesas-dts-for-v6.16-tag5' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt Renesas DTS updates for v6.16 (take five) - Reduce I2C2 clock frequency on the RZ/G3E SMARC SoM. * tag 'renesas-dts-for-v6.16-tag5' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: rzg3e-smarc-som: Reduce I2C2 clock frequency Link: https://lore.kernel.org/r/cover.1748355530.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-28Merge tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm updates from Dave Airlie: "As part of building up nova-core/nova-drm pieces we've brought in some rust abstractions through this tree, aux bus being the main one, with devres changes also in the driver-core tree. Along with the drm core abstractions and enough nova-core/nova-drm to use them. This is still all stub work under construction, to build the nova driver upstream. The other big NVIDIA related one is nouveau adds support for Hopper/Blackwell GPUs, this required a new GSP firmware update to 570.144, and a bunch of rework in order to support multiple fw interfaces. There is also the introduction of an asahi uapi header file as a precursor to getting the real driver in later, but to unblock userspace mesa packages while the driver is trapped behind rust enablement. Otherwise it's the usual mixture of stuff all over, amdgpu, i915/xe, and msm being the main ones, and some changes to vsprintf. new drivers: - bring in the asahi uapi header standalone - nova-drm: stub driver rust dependencies (for nova-core): - auxiliary - bus abstractions - driver registration - sample driver - devres changes from driver-core - revocable changes core: - add Apple fourcc modifiers - add virtio capset definitions - extend EXPORT_SYNC_FILE for timeline syncobjs - convert to devm_platform_ioremap_resource - refactor shmem helper page pinning - DP powerup/down link helpers - extended %p4cc in vsprintf.c to support fourcc prints - change vsprintf %p4cn to %p4chR, remove %p4cn - Add drm_file_err function - IN_FORMATS_ASYNC property - move sitronix from tiny to their own subdir rust: - add drm core infrastructure rust abstractions (device/driver, ioctl, file, gem) dma-buf: - adjust sg handling to not cache map on attach - allow setting dma-device for import - Add a helper to sort and deduplicate dma_fence arrays docs: - updated drm scheduler docs - fbdev todo update - fb rendering - actual brightness ttm: - fix delayed destroy resv object bridge: - add kunit tests - convert tc358775 to atomic - convert drivers to devm_drm_bridge_alloc - convert rk3066_hdmi to bridge driver scheduler: - add kunit tests panel: - refcount panels to improve lifetime handling - Powertip PH128800T004-ZZA01 - NLT NL13676BC25-03F, Tianma TM070JDHG34-00 - Himax HX8279/HX8279-D DDIC - Visionox G2647FB105 - Sitronix ST7571 - ZOTAC rotation quirk vkms: - allow attaching more displays i915: - xe3lpd display updates - vrr refactor - intel_display struct conversions - xe2hpd memory type identification - add link rate/count to i915_display_info - cleanup VGA plane handling - refactor HDCP GSC - fix SLPC wait boosting reference counting - add 20ms delay to engine reset - fix fence release on early probe errors xe: - SRIOV updates - BMG PCI ID update - support separate firmware for each GT - SVM fix, prelim SVM multi-device work - export fan speed - temp disable d3cold on BMG - backup VRAM in PM notifier instead of suspend/freeze - update xe_ttm_access_memory to use GPU for non-visible access - fix guc_info debugfs for VFs - use copy_from_user instead of __copy_from_user - append PCIe gen5 limitations to xe_firmware document amdgpu: - DSC cleanup - DC Scaling updates - Fused I2C-over-AUX updates - DMUB updates - Use drm_file_err in amdgpu - Enforce isolation updates - Use new dma_fence helpers - USERQ fixes - Documentation updates - SR-IOV updates - RAS updates - PSP 12 cleanups - GC 9.5 updates - SMU 13.x updates - VCN / JPEG SR-IOV updates amdkfd: - Update error messages for SDMA - Userptr updates - XNACK fixes radeon: - CIK doorbell cleanup nouveau: - add support for NVIDIA r570 GSP firmware - enable Hopper/Blackwell support nova-core: - fix task list - register definition infrastructure - move firmware into own rust module - register auxiliary device for nova-drm nova-drm: - initial driver skeleton msm: - GPU: - ACD (adaptive clock distribution) for X1-85 - drop fictional address_space_size - improve GMU HFI response time out robustness - fix crash when throttling during boot - DPU: - use single CTL path for flushing on DPU 5.x+ - improve SSPP allocation code for better sharing - Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550 - Added SAR2130P support - Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660 - DP: - switch to new audio helpers - better LTTPR handling - DSI: - Added support for SA8775P - Added SAR2130P support - HDMI: - Switched to use new helpers for ACR data - Fixed old standing issue of HPD not working in some cases amdxdna: - add dma-buf support - allow empty command submits renesas: - add dma-buf support - add zpos, alpha, blend support panthor: - fail properly for NO_MMAP bos - add SET_LABEL ioctl - debugfs BO dumping support imagination: - update DT bindings - support TI AM68 GPU hibmc: - improve interrupt handling and HPD support virtio: - add panic handler support rockchip: - add RK3588 support - add DP AUX bus panel support ivpu: - add heartbeat based hangcheck mediatek: - prepares support for MT8195/99 HDMIv2/DDCv2 anx7625: - improve HPD tegra: - speed up firmware loading * tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel: (1627 commits) drm/nouveau/tegra: Fix error pointer vs NULL return in nvkm_device_tegra_resource_addr() drm/xe: Default auto_link_downgrade status to false drm/xe/guc: Make creation of SLPC debugfs files conditional drm/i915/display: Add check for alloc_ordered_workqueue() and alloc_workqueue() drm/i915/dp_mst: Work around Thunderbolt sink disconnect after SINK_COUNT_ESI read drm/i915/ptl: Use everywhere the correct DDI port clock select mask drm/nouveau/kms: add support for GB20x drm/dp: add option to disable zero sized address only transactions. drm/nouveau: add support for GB20x drm/nouveau/gsp: add hal for fifo.chan.doorbell_handle drm/nouveau: add support for GB10x drm/nouveau/gf100-: track chan progress with non-WFI semaphore release drm/nouveau/nv50-: separate CHANNEL_GPFIFO handling out from CHANNEL_DMA drm/nouveau: add helper functions for allocating pinned/cpu-mapped bos drm/nouveau: add support for GH100 drm/nouveau: improve handling of 64-bit BARs drm/nouveau/gv100-: switch to volta semaphore methods drm/nouveau/gsp: support deeper page tables in COPY_SERVER_RESERVED_PDES drm/nouveau/gsp: init client VMMs with NV0080_CTRL_DMA_SET_PAGE_DIRECTORY drm/nouveau/gsp: fetch level shift and PDE from BAR2 VMM ...
2025-05-26arm64: dts: renesas: rzg3e-smarc-som: Reduce I2C2 clock frequencyJohn Madieu
Lower the I2C2 bus clock frequency on the RZ/G3E SMARC SoM from 1MHz to 400kHz to improve compatibility with a wider range of I2C peripherals. As the GreenPAK device is programmed to operate at 400kHz, the previous 1MHz setting was too aggressive, causing it to experience timing issues. Fixes: f7a98e256ee3 ("arm64: dts: renesas: rzg3e-smarc-som: Add I2C2 device pincontrol") Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250518220812.1480696-1-john.madieu.xa@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-05-22Merge tag 'juno-updates-6.16' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/dt Armv8 Juno/FVP updates for v6.16 Few updates to the Arm FVP(Fixed Virtual Platform) device tree, enhancing support for system tracing, power management, and firmware coexistence: 1. ETE and TRBE support Adds CoreSight ETE and TRBE nodes for the FVP Rev C model. These are disabled by default as they need to be enabled explicitly via model parameters. 2. CPU idle states and system timer for idle broadcast Introduces CPU idle state definitions but disabled by default due to potential performance impact on the model. Also adds a system-level broadcast timer for use when CPUs enter deep idle states where local timers stop. 3. Firmware memory reservation Reserves 64MB at the end of the first DRAM bank to prevent conflicts with FF-A firmware or similar configurations that rely on this region. 4. Drop the unnecessary clock-frequency property in the timer nodes The boot/secure firmware must configure the timer clock frequency and the non-secure OS must be able to read the same. The clock-frequency is generally used when the firmware is broken which is not the case on most of the fast models and Juno platform. As noted above some of the changes are disabled by default where applicable to ensure backward compatibility and avoid unintended performance impact on platforms using default model parameters. * tag 'juno-updates-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: arm64: dts: fvp: Add ETE and TRBE nodes for Rev C model arm64: dts: arm: Drop the clock-frequency property from timer nodes arm64: dts: fvp: Reserve 64MB for the FF-A firmware in memory map arm64: dts: fvp: Add CPU idle states for Rev C model arm64: dts: fvp: Add system timer for broadcast during CPU idle Link: https://lore.kernel.org/r/20250513143827.3606686-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-22Merge tag 'qcom-arm64-for-6.16-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt More Qualcomm Arm64 DeviceTree updates for v6.16 Support for CPU frequency scaling is enabled on the X Elite platform. Also on X Elite, support for the HP EliteBook Ultra G1q is introduced. Support for the QCS6490 RB3gen2 Industrial Mezzanine is also added. PCIe controllers and PHYs are described and enabled across IPQ5018, IPQ5332, and IPQ5424. On IPQ9474 the missing MHI register range is added. The TCSR block is described and used to enable download mode flags on IPQ5018. The venus video encoder/decoder is enabled on the MSM8998-based Lenovo Miix 630 laptop. The crypto engine is enabled on QCM2290 and QCS615. Bluetooth is enabled on the QCM2210-based RB1 board. The Fairphone FP5 gains Displayport sound support. SAR2130P display nodes are added. On 8cx Gen3 the sensor remoteproc (SLPI) is introduced and this is enabled on Lenovo Thinkpad X13s and the CRD. The SDM845-based Samsung Galaxy S9 gains graphics, modem and initial sound support. On SDX75 the QPIC BAM and NAND support is added, and these are enabled on the IDP board. LLCC is added for SM8750. SM8550 gains Iris video decoder support. For X Elite, Lenovo ThinkPad T14s support for the SDX62 modem, as well as audio headset, is added. ASUS Vivobook S 15 gains Bluetooth support, Microsoft Surface Laptop 7 models gets support for DP over USB Type-C, HP Omnibook X 14 gains audio support. The devkit gets the USB multiport controller and the two USB Type-A ports described. Additionally a variety of Devicetree fixes are introduced, primarily identified through binding validation. * tag 'qcom-arm64-for-6.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (58 commits) arm64: dts: qcom: sm4450: Add RPMh power domains support arm64: dts: qcom: x1e80100-lenovo-yoga-slim7x: add retimers, dp altmode support arm64: dts: qcom: ipq5424: Enable PCIe PHYs and controllers arm64: dts: qcom: ipq5424: Add PCIe PHYs and controller nodes arm64: dts: qcom: sc7280: Mark FastRPC context banks as dma-coherent arm64: dts: qcom: sdx75-idp: Enable QPIC BAM & QPIC NAND support arm64: dts: qcom: sdx75: Add QPIC NAND support arm64: dts: qcom: sdx75: Add QPIC BAM support arm64: dts: qcom: qcm2290: Add crypto engine arm64: dts: qcom: x1e80100-vivobook-s15: Add bluetooth arm64: dts: qcom: x1e80100: Add PCIe lane equalization preset properties arm64: dts: qcom: qcs615: Fix up UFS clocks arm64: dts: qcom: sa8775p: Clean up the PSCI PDs arm64: dts: qcom: msm8996-oneplus: Add SLPI VDD_PX arm64: dts: qcom: sm6350-pdx213: Wire up USB regulators arm64: dts: qcom: msm8998-yoshino: Add QUSB2PHY VDD supply arm64: dts: qcom: msm8998-mtp: Add QUSB2PHY VDD supply arm64: dts: qcom: msm8998-fxtec: Add QUSB2PHY VDD supply arm64: dts: qcom: qcs615: Remove disallowed property from AOSS_QMP node arm64: dts: qcom: msm8998: Remove mdss_hdmi_phy phandle argument ... Link: https://lore.kernel.org/r/20250520024248.38904-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-22Merge tag 'mtk-dts64-for-v6.16-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt Additional MediaTek ARM64 DTS updates for v6.16 This addresses devicetree binding warnings happening on the MDP3 nodes in mt8188 dts, reverts the commit adding the SCP firmware-name as strongly suggested by Arnd, and also adds some more late commits. In particular: - MT6359 PMIC - Renamed PMIC RTC node to fix dtbs_check warning - MT7988(A) - Support for SPI controllers was added to SoC and BPI-R4 - Support for XSPHY, USB and PCIe2 was added as well - Fan and cooling maps were added to BPI-R4 machine - Added BananaPi R4 2G5 machine variant - MT8365 - Added touchscreen support to MT8365 Genio EVK - MT8188 - Addressed dtbs_check warnings for MDP3 nodes - MT8390 (Genio) - Reverted SCP firmware-name addition * tag 'mtk-dts64-for-v6.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (42 commits) Revert "arm64: dts: mediatek: mt8390-genio-common: Add firmware-name for scp0" arm64: dts: mediatek: mt8188: Address binding warnings for MDP3 nodes arm64: dts: mt6359: Rename RTC node to match binding expectations arm64: dts: mt8365-evk: Add goodix touchscreen support arm64: dts: mediatek: mt8188: Add missing #reset-cells property arm64: dts: airoha: en7581: Add PCIe nodes to EN7581 SoC evaluation board arm64: dts: airoha: en7581: Add gpio-ranges property for gpio controller arm64: dts: mediatek: mt7988a-bpi-r4: configure spi-nodes arm64: dts: mediatek: mt7988a-bpi-r4: Add fan and coolingmaps arm64: dts: mediatek: mt7988: add phy calibration efuse subnodes arm64: dts: mediatek: mt7988: move uart0 and spi1 pins to soc dtsi arm64: dts: mediatek: mt7988: add spi controllers arm64: dts: mediatek: mt7988a-bpi-r4: enable xsphy arm64: dts: mediatek: mt7988: Add xsphy for ssusb0/pcie2 arm64: dts: mediatek: mt7988a-bpi-r4: allow hw variants of bpi-r4 dt-bindings: arm: mediatek: add bpi-r4 2g5 phy variant arm64: dts: mt6359: Add missing 'compatible' property to regulators node arm/arm64: dts: mediatek: Add missing "#sound-dai-cells" to linux,bt-sco arm64: dts: mediatek: mt8390-genio-common: Set ssusb2 default dual role mode to host arm64: dts: mediatek: mt8395-genio-1200-evk: Disable unused backlight ... Link: https://lore.kernel.org/r/20250520114356.1194450-1-angelogioacchino.delregno@collabora.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-22Merge tag 'v6.16-rockchip-dts64-3' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt Power-domains needed for stability, dropping of unnecessary assigned-clocks (handled by cpufreq) and fixes for dtc W=1 warnings. * tag 'v6.16-rockchip-dts64-3' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: move rk3562 pinctrl node outside the soc node arm64: dts: rockchip: fix rk3562 pcie unit addresses arm64: dts: rockchip: move rk3528 pinctrl node outside the soc node arm64: dts: rockchip: remove a double-empty line from rk3576 core dtsi arm64: dts: rockchip: move rk3576 pinctrl node outside the soc node arm64: dts: rockchip: fix rk3576 pcie unit addresses arm64: dts: rockchip: Drop assigned-clock* from cpu nodes on rk3588 arm64: dts: rockchip: Add missing SFC power-domains to rk3576 Link: https://lore.kernel.org/r/4798229.ejJDZkT8p0@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-22Merge tag 'v6.16-rockchip-dts64-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt New SoC the RK3562 (4xA53, Mali-G52) with one evaluation board. New boards: - Cobra and PP1516 from Theobroma-Systems (build around the PX30) - Radxa Rock 5B+ (rk3588) - Rockchip RK3399 industrial eval board New peripherals: - GMAC + SDMMC/SDIO on rk3528 - SAI + HDMI-audio on rk3576 Interesting general updates: - move rk3528 i2c + uart aliases as requested - rk3568 PCIe3 MSI to use GIC ITS - update deprecated dwmac reset properties on some px30 boards - updates for cypress usb hubs on some Theobroma boards Binding taken with Greg's blessing https://lore.kernel.org/all/2025051550-polish-prude-ed56@gregkh/ * tag 'v6.16-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (35 commits) arm64: dts: rockchip: Improve LED config for NanoPi R5S arm64: dts: rockchip: add px30-pp1516 base dtsi and board variants dt-bindings: arm: rockchip: add PX30-PP1516 boards from Theobroma Systems arm64: dts: rockchip: add px30-cobra base dtsi and board variants dt-bindings: arm: rockchip: add PX30-Cobra boards from Theobroma Systems arm64: dts: rockchip: move reset to dedicated eth-phy node on ringneck arm64: dts: rockchip: add basic mdio node to px30 arm64: dts: rockchip: disable unrouted USB controllers and PHY on RK3399 Puma with Haikou arm64: dts: rockchip: disable unrouted USB controllers and PHY on RK3399 Puma arm64: dts: rockchip: fix internal USB hub instability on RK3399 Puma dt-bindings: usb: cypress,hx3: Add support for all variants arm64: dts: rockchip: move rk3528 i2c+uart aliases to board files arm64: dts: rockchip: drop wrong spdif clock from edp1 on rk3588 arm64: dts: rockchip: Add RK3562 evb2 devicetree arm64: dts: rockchip: add core dtsi for RK3562 SoC dt-bindings: arm: rockchip: Add rk3562 evb2 board dt-bindings: soc: rockchip: Add rk3562 syscon compatibles dt-bindings: rockchip: pmu: Add rk3562 compatible arm64: dts: rockchip: Enable Ethernet controller on Radxa E20C arm64: dts: rockchip: Add GMAC nodes for RK3528 ... Link: https://lore.kernel.org/r/3998939.iIbC2pHGDl@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-22Merge tag 'mvebu-dt64-6.16-1' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt mvebu dt64 for 6.16 (part 1) Clean up unused pinctrl-names in pca9555 nodes * tag 'mvebu-dt64-6.16-1' of https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: dts: marvell: Drop unused "pinctrl-names" Link: https://lore.kernel.org/r/87tt5kpqy9.fsf@BLaptop.bootlin.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-22Merge tag 'renesas-dts-for-v6.16-tag4' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt Renesas DTS updates for v6.16 (take four) - Fix White Hawk ARD Audio breakage. * tag 'renesas-dts-for-v6.16-tag4' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: white-hawk-ard-audio: Fix TPU0 groups Link: https://lore.kernel.org/r/cover.1747817851.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'renesas-dts-for-v6.16-tag3' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt Renesas DTS updates for v6.16 (take three) - Silence a DTC warning, - Add an extra compatible value to avoid future issues. * tag 'renesas-dts-for-v6.16-tag3' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: riscv: dts: renesas: Add specific RZ/Five cache compatible arm64: dts: renesas: sparrow-hawk: Disable dtc spi_bus_bridge check Link: https://lore.kernel.org/r/cover.1747399860.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'microchip-dt64-6.16' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt Microchip ARM64 device tree updates for v6.16 This update includes: - fix CPU node "enable-method" property dependencies * tag 'microchip-dt64-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: arm64: dts: microchip: sparx5: Fix CPU node "enable-method" property dependencies Link: https://lore.kernel.org/r/20250516055607.11248-1-claudiu.beznea@tuxon.dev Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'sunxi-dt-for-6.16' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt Allwinner device tree changes for 6.16 Introduce Allwinner A523 / A527 / T527 SoC family w/ three new devices: - Radxa Cubie A5E - X96Q-Pro+ - Avaota-A1 Also enable EMAC0 ethernet MAC on A523 family for Cubie A5E & Avaota-A1. Note: the SoC has two different ethernet controllers. Changes to existing SoCs: - Enable GPU on H616 with all boards enabled - Set maximum MMC frequency for the A100 Changes to existing boards: - Add WiFi/BT header on PINE64 A64 boards - Add hp-det-gpios for Anbernic RG35XX - Add support for PHY LEDs on Bananapi (the original one) Add new devices for existing SoCs: - YuzukiHD Chameleon based on H6 - Liontron H-A133L based on A133 (compatible with A100) Tree wide cleanups: - Use preferred node names for cooling maps - Align wifi node name with bindings - Drop spurious 'clock-latency-ns' properties for H5 & H6 * tag 'sunxi-dt-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (27 commits) arm64: dts: allwinner: a100: add Liontron H-A133L board support dt-bindings: arm: sunxi: Add Liontron H-A133L board name dt-bindings: vendor-prefixes: Add Liontron name ARM: dts: bananapi: add support for PHY LEDs arm64: dts: allwinner: a100: set maximum MMC frequency arm64: dts: allwinner: t527: add EMAC0 to Avaota-A1 board arm64: dts: allwinner: a527: add EMAC0 to Radxa A5E board arm64: dts: allwinner: a523: Add EMAC0 ethernet MAC dt-bindings: sram: sunxi-sram: Add A523 compatible arm64: dts: allwinner: a64: Add WiFi/BT header on SOPINE Baseboard arm64: dts: allwinner: a64: Add WiFi/BT header on PINE A64 arm64: dts: allwinner: correct the model name for Radxa Cubie A5E ARM: dts: allwinner: Align wifi node name with bindings arm64: dts: allwinner: Align wifi node name with bindings arm64: dts: allwinner: h616: enable Mali GPU for all boards arm64: dts: allwinner: h616: Add Mali GPU node arm64: dts: allwinner: h700: Add hp-det-gpios for Anbernic RG35XX arm64: dts: allwinner: h5/h6: Drop spurious 'clock-latency-ns' properties arm/arm64: dts: allwinner: Use preferred node names for cooling maps arm64: dts: allwinner: h616: add YuzukiHD Chameleon support ... Link: https://lore.kernel.org/r/aCaeZJ2t4S_xhgjp@wens.tw Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'stm32-dt-for-v6.16-1' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt STM32 DT for v6.16, round 1 Highlights: ---------- - MCU: - Add low power timer on STM32F746 - Add STM32H747 High end MCU support. It embeds: - dual-core (Cortex-M7 + Cortex-M4) - up to 2 Mbytes flash - 1 Mbyte of internal RAM - Add STM32H747i-disco board support. Detailed information can be found at: https://www.st.com/en/evaluation-tools/stm32h747i-disco.html - MPU: - STM32MP13: - Add VREFINT calibration support based on ADC. - STMP32MP15: - Add new Ultratronik Fly board support: - based on STM32MP157C SoC - 1GB of DDR3 - Several connections are available on this boards: 2*USB2.0, 1*USB2.0 MiniUSB, Debug UART, 1*UART, 1*USART, SDcard, RJ45, ... - STM32MP25: - Add OCTOSPI support on STM32MP25 SoCs - Add SPI NOR flash support on STM32MP257F-EV1 connected to OSPI1 - Add Low power timer TIMER (LPTIM) on STM32MP25 SoCs and use LPTIM3 as low power broadcast timer on STM32MP257F-EV1. * tag 'stm32-dt-for-v6.16-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (22 commits) ARM: dts: stm32: add initial support for stm32mp157-ultra-fly-sbc board MAINTAINERS: Add entry for ULTRATRONIK BOARD SUPPORT dt-bindings: arm: stm32: Document Ultratronik's Fly board DT binding dt-bindings: vendor-prefixes: Add Ultratronik arm64: dts: st: use lptimer3 as tick broadcast source on stm32mp257f-ev1 arm64: dts: st: add low-power timer nodes on stm32mp251 arm64: defconfig: enable STM32 LP timer clockevent driver arm64: dts: st: Add SPI NOR flash support on stm32mp257f-ev1 board arm64: dts: st: Add ospi port1 pinctrl entries in stm32mp25-pinctrl.dtsi arm64: dts: st: Add OMM node on stm32mp251 ARM: dts: stm32: support STM32h747i-disco board ARM: dts: stm32: add an extra pin map for USART1 on stm32h743 ARM: dts: stm32: add pin map for UART8 controller on stm32h743 ARM: dts: stm32: add uart8 node for stm32h743 MCU dt-bindings: clock: stm32h7: rename USART{7,8}_CK to UART{7,8}_CK ARM: stm32: add a new SoC - STM32H747 dt-bindings: arm: stm32: add compatible for stm32h747i-disco board ARM: dts: stm32h7-pinctrl: add _a suffix to u[s]art_pins phandles ARM: dts: st: stm32: Align wifi node name with bindings ARM: dts: stm32: add low power timer on STM32F746 ... Link: https://lore.kernel.org/r/2f101efb-6d58-48d8-983a-57e30a34827c@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'qcom-arm64-for-6.16' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm Arm64 DeviceTree updates for v6.16 The Snapdragon X Plus platform and related reference device is introduced. Devicetree for the Xiaomi Redmi Note 8 is added. Tsens and thermal zones are added for IPQ5332 and IPQ5424. IPQ6018 gains 1.2GHz and 1.5GHz CPU frequencies. The IPQ5424 gains MMC, LEDs and buttons, while the IPQ9574 gains NSS clock controller and SPI NAND support. IPQ6018 SMEM is transitioned to be described directly in the reserved-memory node. Display and GPU are enabled in the QCM6490-based Fairphone FP5. On QCS6490 Rb3Gen2 ADC channels for thermal profiling are added and Bluetooth is enabled. The USB Type-C orientation GPIO is added on the QCS6490 Rb3Gen2 and the vision mezzanine is described. The Fairphone FP5 gains touchscreen and USB Type-C display support, and the QCM6490 IDP board gains a required listed of protected clocks. The camera subsystem in SC7280 is described and UFS is transitioned to use operating points. On MSM8916, MSM8919 and MSM8939, and devices on these platforms, the UART pinctrl state is cleaned up. The MSM8953 platform gains another UART and interconnects. On SA8775P CTCU and ETR nodes are added, and the CPUfreq throttling interrupts are added. Samsung Galaxy S9 SM-G9600 gains a description of the MAX77705 used for charging, fuel gauge, haptic, and LED, as well as the PMIC used for display and touchscreen, which then is used to enable the touchscreen. The LPG/PWM node is added to PM8937 and Xiaomi Redmi 5A gains display backlight control. Display and GPU are enabled for the Nothing Phone (1). QCS615 platform gains command DB definition. The QCS8300 platform gains description of more QUP instances, CPUfreq, PCIe SMMU and the SPMI controller. On SAR2130P PCIe EP device nodes are added. On SDM630 missing resets are added for SDCC. Then on Fairphone FP3 modem is enabled, and firmware-path are defined on ADSP and WCNSS. The SDM845 RB3/DragonBoard845c and the QRB5165 RB5 has the sensors DSP enabled, and the vision mezzanine on both gets their CMA configuration cleaned up. Xiaomi Pocophone F1 gains touchscreen support. On the SM7325 Nothing Phone (1), display, GPU, and camera EEPROMs are described. On SM8450 the PCIe endpoint controller is described. For SM8550 OPP tables are described for PCIe and QUP. SM8750 gains RPMh sleep stats. SM8650 gians OSM L3 scaling and variety of OPP tables and missing interconnect definitions. The thermal trip points for CPU cores and GPU are raised in reliance on hardware throttling. SM8650 is also transitioned to per-CPU interrupt partitions, in order to properly describe the PMU interrupts. Missing Coresight ETE instances are added. On SM8750 the cluster idle states are corrected, then audio and compute DSPs are introduced, together with the crypto and rng blocks. Modem support is added and enabled on MTP and QRD devices. On SC8280XP overlays are introduced for those running Linux at EL2 on these devices. A few more temp-alarm instances are added for the PMICs. On the X Elite platform GPU cooling and watchdog is introduced, together with a number of smaller fixes. Dell XPS13 gains support for USB Type-C display, the QCP gains WiFi/BT power sequence, and a few devices learns about HBR3. The RTC support is enabled and regulators that are feeding resources that should be always on is marked as such on a variety of boards. The Lenovo Thinkpad T14s DeviceTree is split in two, in order to describe the LCD and OLED variants. Missing properties for the crypto BAM is introduced on a variety of platforms, taking care of a long standing error message in the kernel log during boot. DSI phy clock ids are transitioned to use identifiers from the PHY header file and VBIF region size is corrected, across a large number of platforms. A couple of DWC3 quirks are added across a lot of platforms. The arm32-for-6.15 pull request was accidentally merged into the arm64-for-6.16 branch and this wasn't discovered until a significant number of commits would have to be rebased. As such this is kept here as well. * tag 'qcom-arm64-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (308 commits) arm64: dts: qcom: sdm845-xiaomi-beryllium-ebbg: introduce touchscreen support arm64: dts: qcom: sdm845-xiaomi-beryllium-tianma: introduce touchscreen support arm64: dts: qcom: sdm845-xiaomi-beryllium-common: add touchscreen related nodes arm64: dts: qcom: qcs8300: add the pcie smmu node arm64: dts: qcom: x1e80100-*: Drop useless DP3 compatible override arm64: dts: qcom: msm8953: Add interconnects arm64: dts: qcom: msm8953: Add uart_5 arm64: dts: qcom: sm8350: Use q6asm defines for reg arm64: dts: qcom: sm7325-nothing-spacewar: Use q6asm defines for reg arm64: dts: qcom: sdm850*: Use q6asm defines for reg arm64: dts: qcom: sdm845*: Use q6asm defines for reg arm64: dts: qcom: sc7280: Use q6asm defines for reg arm64: dts: qcom: sc7180-acer-aspire1: Use q6asm defines for reg arm64: dts: qcom: qrb5165-rb5: Use q6asm defines for reg arm64: dts: qcom: msm8996*: Use q6asm defines for reg arm64: dts: qcom: msm8953: Use q6asm defines for reg arm64: dts: qcom: msm8916-modem-qdsp6: Use q6asm defines for reg arm64: dts: qcom: apq8096-db820c: Use q6asm defines for reg arm64: dts: qcom: qcm6490-fairphone-fp5: Hook up DisplayPort over USB-C arm64: dts: qcom: qcm6490-fairphone-fp5: Add OCP96011 audio switch ... Link: https://lore.kernel.org/r/20250511235241.15192-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'mvebu-fixes-6.15-1' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/fixes mvebu fixes for 6.15 (part 1) Fix uDPU board LEDs by correcting pinctrl state * tag 'mvebu-fixes-6.15-1' of https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: dts: marvell: uDPU: define pinctrl state for alarm LEDs Link: https://lore.kernel.org/r/87wmagpr0a.fsf@BLaptop.bootlin.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'sunxi-fixes-for-6.15' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes Allwinner fixes for 6.15 Only one fix: Switch back to I2C for PMICs on Allwinner H6 devices. Apparently using Allwinner's proprietary bus ended up causing issues when the PMIC was sharing the bus with other devices. * tag 'sunxi-fixes-for-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: Revert "arm64: dts: allwinner: h6: Use RSB for AXP805 PMIC connection" Link: https://lore.kernel.org/r/aCaeLgjZllV7bauX@wens.tw Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21arm64: dts: nuvoton: Add pinctrlWilliam A. Kennington III
This is critical to support multifunction pins shared between devices as well as generic GPIOs. Signed-off-by: William A. Kennington III <william@wkennington.com> Link: https://patch.msgid.link/20250416015902.2091251-1-william@wkennington.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Link: https://lore.kernel.org/r/20250515-nuvoton-arm64-dt-v1-1-25769b8c1509@codeconstruct.com.au Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21mailmap: update and consolidate Casey Connolly's name and emailCasey Connolly
I've used several email addresses and a previous name to contribute. Consolidate all of these to my primary email and update my name. Link: https://lkml.kernel.org/r/20250517223237.15647-2-casey.connolly@linaro.org Signed-off-by: Casey Connolly <casey.connolly@linaro.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-05-21Merge tag 'dt64-cleanup-6.16' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt Minor improvements in ARM64 DTS for v6.16 Two cleanups which were missed on mailing lists - align GPIO node names with DT bindings for Mediatek mt7622 and Nvidia Tegra210-p2894. * tag 'dt64-cleanup-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt: arm64: tegra: tegra210-p2894: Align GPIO hog node name with preferred style arm64: dts: mediatek: mt7622: Align GPIO hog name with bindings Link: https://lore.kernel.org/r/20250513104216.25803-4-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'amlogic-arm64-dt-for-v6.16' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt Amlogic ARM64 DT for v6.16: - Amlogic A4 Pinctrl support - UART RX/TX pull-up pinconf properties for all SoCs - SARADC support for the S905L SoC variant - Drop clock-latency in CPU node - Amlogic clk measure support for S4 & C3 Socs - Amlogic S6/S7/S7D initial support - I2C default pull-up bias pinconf property on Amlogic GXL based boards - Amlogic A4 & A5 Reset Controller support - New Boards: - Amlogic S6 BL209 Reference Board - Amlogic S7 BP201 Reference Board - Amlogic S7D BM202 Reference Board - Amlogic S805Y xiaomi-aquaman/Mi TV Stick * tag 'amlogic-arm64-dt-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: (21 commits) arm64: dts: amlogic: Add A5 Reset Controller arm64: dts: amlogic: Add A4 Reset Controller arm64: dts: amlogic: add support for xiaomi-aquaman/Mi TV Stick dt-bindings: arm: amlogic: add S805Y and Mi TV Stick arm64: dts: amlogic: gxl: set i2c bias to pull-up arm64: dts: add support for S7D based Amlogic BM202 arm64: dts: add support for S7 based Amlogic BP201 arm64: dts: add support for S6 based Amlogic BL209 dt-bindings: arm: amlogic: add S7D support dt-bindings: arm: amlogic: add S7 support dt-bindings: arm: amlogic: add S6 support arm64: dts: amlogic: S4: Add clk-measure controller node arm64: dts: amlogic: C3: Add clk-measure controller node arm64: dts: amlogic: Drop redundant CPU "clock-latency" arm64: dts: amlogic: gxlx-s905l-p271: add saradc compatible arm64: dts: amlogic: a1: enable UART RX and TX pull up by default arm64: dts: amlogic: axg: enable UART RX and TX pull up by default arm64: dts: amlogic: g12: enable UART RX and TX pull up by default arm64: dts: amlogic: gxl: enable UART RX and TX pull up by default arm64: dts: amlogic: gxbb: enable UART RX and TX pull up by default ... Link: https://lore.kernel.org/r/5f7d3fa4-2d9d-450b-b384-abdd903284dc@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'samsung-dt64-6.16' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt Samsung DTS ARM64 changes for v6.16 1. Tesla FSD: Add Ethernet. 2. ExynosAutov920: Add more serial nodes, clock controllers for CPU cluster CL0, CL1 and CL2. 3. New Exynos7870 SoC with pretty decent coverage: pin controllers, clock controllers, I2C, MMC, serial and USB. New boards using Exynos7870: Samsung Galaxy J7 Prime, Samsung Galaxy A2 Core and Samsung Galaxy J6. 4. Google GS101: Add pmu-intr-gen syscon node for proper CPU hotplug. 5. Switch USI (serial engines) nodes to new samsung,mode constant coming with DT bindings v6.15-rc1. * tag 'samsung-dt64-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: gs101: add pmu-intr-gen syscon node arm64: dts: exynos: add initial support for Samsung Galaxy J6 arm64: dts: exynos: add initial support for Samsung Galaxy A2 Core arm64: dts: exynos: add initial support for Samsung Galaxy J7 Prime arm64: dts: exynos: add initial devicetree support for exynos7870 dt-bindings: arm: samsung: add compatibles for exynos7870 devices arm64: dts: exynosautov920: add cpucl1/2 clock DT nodes arm64: dts: exynosautov920: add cpucl0 clock DT nodes arm64: dts: exynos: Add DT node for all UART ports arm64: dts: exynos: update all samsung,mode constants arm64: dts: fsd: Add Ethernet support for PERIC Block of FSD SoC arm64: dts: fsd: Add Ethernet support for FSYS0 Block of FSD SoC Link: https://lore.kernel.org/r/20250513101023.21552-6-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21Merge tag 'ti-k3-dt-for-v6.16' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt TI K3 device tree updates for v6.16 Generic Fixups/Cleanups: * am62*: emmc - drop disable-wp, Add bootphase tags to support MMC boot SoC Specific features and Fixes: AM62Ax: * C7x and R5F support added * Bug fix for emmc clock to point to default * CPUFreq thermal throttling on thermal alert AM62P5: * Add RNG Node (common to J722s) * Bug fix for emmc clock to point to default (common to J722S) AM625: * Wakeup R5 node * Bug fix for emmc clock to point to default * PRUSS-M support * New GPU bindings AM64: * Switch to 64-bit address space for PCIe0 * Add PCIe control nodes for main_conf region * Reserve timer nodes used by MCU F/w. AM65: * MMC: Add missing delay timing values for SDR and legacy modes * Add compatible for AM65x syscon and PCIe control properties (dtbs_check fixes) J7200: * PCIe control node to scm_conf, switch to 64-bit address space for PCIe1. J721E: * PCIe control node to scm_conf, switch to 64-bit address space for PCIe0,1. J721S2: * GPU node for Imagination Tech Rouge BXS GPU. * PCIe control node to scm_conf, switch to 64-bit address space for PCIe1. J722s/AM67A: * Switch serdes status to be enabled by board file than at SoC level. * Switch to 64-bit address space for PCIe0. J784S4/J742S2/AM69: * Add ASPCIE0 and enable output for PCIe1 * Fix length of serdes_ln_ctrl. * Switch to 64-bit address space for PCIe0,1. Board Specific: AM62Ax: * SK: co-processors C7x, R5, PWM support added * phycore-som: co-processors C7x, R5 AM62P5: * Add Toradex Verdin AM62P boards with Dahlia, Ivy, Mallow and Yavia support. * SK: Add remote processor support, PWM AM625: * Add BeagleBoard.org PocketBeagle-2 support * phycore-som: Enable R5F support * Verdin: Add eeprom compatible fallback * SK: Enable PWM, voltage supplies, clock, i2cmux rename for camera overlays (dtbs_check fixes) * BeaglePlay: Add voltage supplies for camera overlays (dtbs_check fixes) * phyboard-lyra: Add cooling maps for fan * emmc bug fixes: add non-removable flag for eMMC. AM65: * EVM: Add missing power supply description ofr Rocktech panel (dtbs_check fixes) J721E: * EVM: Enable OSPI1 * EVM/SK: Dt nodes description for mandatory power suplpies for panel and sensors (dtbs_check fixes) J721S2/AM68: * Add phyBOARD-Izar-AM68x * am68-SK: Fix regulator hierarchy J722s/AM67A: * EVM: Add mux controls for CSI2, power regulator nodes and add overlays for quad IMX219 and TEVI OV5640. * BeagleY-AI: Add bootph for main_gpio1 J784S4/J742S2/AM69: * usxgmii expansion board: Drop un-necessary pinctrl-names * evm: Add overlay for USB0 Type-A option * tag 'ti-k3-dt-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (86 commits) arm64: dts: ti: k3-j722s-evm: Add overlay for TEVI OV5640 arm64: dts: ti: k3-j722s-evm: Add overlay for quad IMX219 arm64: dts: ti: j722s-evm: Add MUX to control CSI2RX arm64: dts: ti: j722s-evm: Add DT nodes for power regulators arm64: dts: ti: k3-am62a-phycore-som: Reserve main_timer2 for C7x DSP arm64: dts: ti: k3-am62a-phycore-som: Reserve main_rti4 for C7x DSP arm64: dts: ti: k3-am62a-phycore-som: Enable Co-processors arm64: dts: ti: k3-am62-phycore-som: Enable Co-processors arm64: dts: ti: k3-am62x-phyboard-lyra-gpio-fan: Update cooling maps arm64: dts: ti: k3-am62a: Enable CPU freq throttling on thermal alert arm64: dts: ti: k3-j721e-common-proc-board: Enable OSPI1 on J721E arm64: dts: ti: k3-j721s2: Add GPU node arm64: dts: ti: k3-am62: New GPU binding details arm64: dts: ti: k3-am62-main: Add PRUSS-M node arm64: dts: ti: k3-am64: Reserve timers used by MCU FW arm64: dts: ti: k3-am62a7-sk: Reserve main_rti4 for C7x DSP arm64: dts: ti: k3-am62a7-sk: Reserve main_timer2 for C7x DSP arm64: dts: ti: k3-am62x-sk-common: Enable IPC with remote processors arm64: dts: ti: k3-am62p5-sk: Enable IPC with remote processors arm64: dts: ti: k3-am62a7-sk: Enable IPC with remote processors ... Link: https://lore.kernel.org/r/20250512144807.yn64klchtmjjl6ac@protrude Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21arm64: dts: blaize-blzp1600: Enable GPIO supportNikolaos Pasaloukos
Blaize BLZP1600 uses the custom silicon provided from VeriSilicon to add GPIO support. This interface is used to control signals on many other peripherals, such as Ethernet, USB, SD and eMMC. Signed-off-by: Nikolaos Pasaloukos <nikolaos.pasaloukos@blaize.com> Link: https://lore.kernel.org/r/20250512133302.151621-1-nikolaos.pasaloukos@blaize.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-20arm64: dts: rockchip: move rk3562 pinctrl node outside the soc nodeHeiko Stuebner
The non-mmio pinctrl node is not supposed to be inside the soc simple-bus as dtc points out: ../arch/arm64/boot/dts/rockchip/rk3562.dtsi:1115.20-1181.5: Warning (simple_bus_reg): /soc/pinctrl: missing or empty reg/ranges property Move the pinctrl node outside and adapt the indentation. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20250518220449.2722673-7-heiko@sntech.de
2025-05-20arm64: dts: rockchip: fix rk3562 pcie unit addressesHeiko Stuebner
The rk3562 pcie node currently uses the apb register as its unit address which is the second reg area defined in the binding. As can be seen by the dtc warnings like ../arch/arm64/boot/dts/rockchip/rk3562.dtsi:624.26-675.5: Warning (simple_bus_reg): /soc/pcie@ff500000: simple-bus unit address format error, expected "fe000000" using the first reg area as the unit address seems to be preferred. This is the dbi area per the binding, so adapt the unit address accordingly and move the nodes to their new position. With the move also move the reg + reg-names below the compatible, as is the preferred position. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20250518220449.2722673-6-heiko@sntech.de
2025-05-20arm64: dts: rockchip: move rk3528 pinctrl node outside the soc nodeHeiko Stuebner
The non-mmio pinctrl node is not supposed to be inside the soc simple-bus as dtc points out: ../arch/arm64/boot/dts/rockchip/rk3528.dtsi:870.20-936.5: Warning (simple_bus_reg): /soc/pinctrl: missing or empty reg/ranges property Move the pinctrl node outside and adapt the indentation. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20250518220449.2722673-5-heiko@sntech.de
2025-05-20arm64: dts: rockchip: remove a double-empty line from rk3576 core dtsiHeiko Stuebner
Two empty lines between nodes, is one too many. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20250518220449.2722673-4-heiko@sntech.de
2025-05-20arm64: dts: rockchip: move rk3576 pinctrl node outside the soc nodeHeiko Stuebner
The non-mmio pinctrl node is not supposed to be inside the soc simple-bus as dtc points out: ../arch/arm64/boot/dts/rockchip/rk3576.dtsi:2351.20-2417.5: Warning (simple_bus_reg): /soc/pinctrl: missing or empty reg/ranges property Move the pinctrl node outside and adapt the indentation. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202505150745.PQT9TLYX-lkp@intel.com/ Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20250518220449.2722673-3-heiko@sntech.de
2025-05-20arm64: dts: rockchip: fix rk3576 pcie unit addressesHeiko Stuebner
The rk3576 pcie nodes currently use the apb register as their unit address which is the second reg area defined in the binding. As can be seen by the dtc warnings like ../arch/arm64/boot/dts/rockchip/rk3576.dtsi:1346.24-1398.5: Warning (simple_bus_reg): /soc/pcie@2a200000: simple-bus unit address format error, expected "22000000" ../arch/arm64/boot/dts/rockchip/rk3576.dtsi:1400.24-1452.5: Warning (simple_bus_reg): /soc/pcie@2a210000: simple-bus unit address format error, expected "22400000" using the first reg area as the unit address seems to be preferred. This is the dbi area per the binding, so adapt the unit address accordingly and move the nodes to their new position. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202505150745.PQT9TLYX-lkp@intel.com/ Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20250518220449.2722673-2-heiko@sntech.de
2025-05-20arm64: dts: rockchip: Drop assigned-clock* from cpu nodes on rk3588Diederik de Haas
The assigned-clocks and assigned-clock-rates properties were moved from the scmi_clk node onto cpu nodes in commit 87810bda8a84 ("arm64: dts: rockchip: Fix SCMI assigned clocks on rk3588s") During review of v1 of that patch set, the following comment was made: why aren't you using OPP tables to define CPU frequencies. Assigned-clocks looks like a temporary hack because you haven't done proper OPP tables. Some time later, proper OPP tables for rk3588 were added in commit 276856db91b4 ("arm64: dts: rockchip: Add OPP data for CPU cores on RK3588") So this 'temporary hack' is no longer needed. Dropping it fixes the following dtb validation issues: cpu@0: Unevaluated properties are not allowed ('assigned-clock-rates', 'assigned-clocks' were unexpected) cpu@400: Unevaluated properties are not allowed ('assigned-clock-rates', 'assigned-clocks' were unexpected) cpu@600: Unevaluated properties are not allowed ('assigned-clock-rates', 'assigned-clocks' were unexpected) Link: https://lore.kernel.org/linux-rockchip/CAL_JsqL_EogoKOQ1xwU75=rJSC4o7yV3Jej4vadtacX2Pt3-hw@mail.gmail.com/ Signed-off-by: Diederik de Haas <didi.debian@cknow.org> Link: https://lore.kernel.org/r/20250519101909.62754-1-didi.debian@cknow.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-05-20arm64: dts: rockchip: Add missing SFC power-domains to rk3576Sebastian Reichel
Add the power-domains for the RK3576 SFC nodes according to the TRM part 1. This fixes potential SErrors when accessing the SFC registers without other peripherals (e.g. eMMC) doing a prior power-domain enable. For example this is easy to trigger on the Rock 4D, which enables the SFC0 interface, but does not enable the eMMC interface at the moment. Cc: stable@vger.kernel.org Fixes: 36299757129c8 ("arm64: dts: rockchip: Add SFC nodes for rk3576") Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20250520-rk3576-fix-fspi-pmdomain-v1-1-f07c6e62dadd@kernel.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-05-20Revert "arm64: dts: mediatek: mt8390-genio-common: Add firmware-name for scp0"AngeloGioacchino Del Regno
As clearly seen on other non-MediaTek platforms, this is known to eventually produce regressions in the future, as drivers may break ABI and stop working with older firmware versions. Although the firmware-name property was used in multiple MediaTek devicetrees for the System Companion Processor (SCP) node, avoid doing the same on MT8390 to lessen eventual ABI breakages that may happen with a driver update to change the firmware retrieval logic for the SCP. This reverts commit 2f0066dae66f30386ecd6408410e27a4d6818c15. Link: https://lore.kernel.org/r/20250520111002.282841-1-angelogioacchino.delregno@collabora.com Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2025-05-20arm64: dts: mediatek: mt8188: Address binding warnings for MDP3 nodesAngeloGioacchino Del Regno
Address various dt-binding warnings for most of the MDP3 nodes by adding and removing interrupts and power domains where required. Also, remove the mediatek,mt8195-mdp3-rdma fallback compatible from the main MDP3 RDMA node as the two have never really been fully compatible. Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20250520104024.3706723-1-angelogioacchino.delregno@collabora.com Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2025-05-20arm64: dts: mt6359: Rename RTC node to match binding expectationsJulien Massot
Rename the node 'mt6359rtc' to 'rtc', as required by the binding. Fix the following dtb-check error: mediatek/mt8395-radxa-nio-12l.dtb: pmic: 'mt6359rtc' do not match any of the regexes: 'pinctrl-[0-9]+' Fixes: 3b7d143be4b7 ("arm64: dts: mt6359: add PMIC MT6359 related nodes") Signed-off-by: Julien Massot <julien.massot@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20250514-mt8395-dtb-errors-v2-3-d67b9077c59a@collabora.com Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2025-05-20arm64: dts: mt8365-evk: Add goodix touchscreen supportLouis-Alexis Eyraud
The Mediatek Genio 350-EVK board has on the DSI0 connector a StarTek KD070FHFID015 display panel that uses a Goodix GT9271 I2C capacitive touch controller. The mt8365-evk devicetree already have the display panel support but lacks the touchscreen support, so add it. Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com> Link: https://lore.kernel.org/r/20250515-mt8365-evk-enable-touchscreen-v1-1-7ba3c87b2a71@collabora.com [Angelo: Reordered regulator nodes and interurpts-extended property] Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2025-05-20arm64: dts: mediatek: mt8188: Add missing #reset-cells propertyJulien Massot
The binding now require the '#reset-cells' property but the devicetree has not been updated which trigger dtb-check errors. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Julien Massot <julien.massot@collabora.com> Link: https://lore.kernel.org/r/20250516-dtb-check-mt8188-v2-2-fb60bef1b8e1@collabora.com Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2025-05-20arm64: dts: airoha: en7581: Add PCIe nodes to EN7581 SoC evaluation boardLorenzo Bianconi
Introduce PCIe controller nodes to EN7581 SoC and EN7581 evaluation board. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/20250517-en7581-evb-pcie-v1-2-97297eb063bb@kernel.org Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2025-05-20arm64: dts: airoha: en7581: Add gpio-ranges property for gpio controllerLorenzo Bianconi
Introduce missing gpio-ranges property for Airoha EN7581 gpio controller Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/20250517-en7581-evb-pcie-v1-1-97297eb063bb@kernel.org Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2025-05-20arm64: dts: mediatek: mt7988a-bpi-r4: configure spi-nodesFrank Wunderlich
Configure and enable SPI nodes on Bananapi R4 board. Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Link: https://lore.kernel.org/r/20250516180147.10416-13-linux@fw-web.de Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2025-05-20arm64: dts: mediatek: mt7988a-bpi-r4: Add fan and coolingmapsFrank Wunderlich
Add Fan and cooling maps for Bananapi-R4 board. Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Link: https://lore.kernel.org/r/20250516180147.10416-12-linux@fw-web.de Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2025-05-20arm64: dts: mediatek: mt7988: add phy calibration efuse subnodesFrank Wunderlich
MT7988 contains buildin mt753x switch which needs calibration data from efuse. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Link: https://lore.kernel.org/r/20250516180147.10416-9-linux@fw-web.de Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2025-05-20arm64: dts: mediatek: mt7988: move uart0 and spi1 pins to soc dtsiFrank Wunderlich
In order to use uart0 or spi1 there is only 1 possible pin definition so move them to soc dtsi to reuse them in other boards and avoiding conflict if defined twice. Suggested-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Link: https://lore.kernel.org/r/20250516180147.10416-7-linux@fw-web.de Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2025-05-20arm64: dts: mediatek: mt7988: add spi controllersFrank Wunderlich
Add SPI controllers for mt7988. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Link: https://lore.kernel.org/r/20250516180147.10416-6-linux@fw-web.de Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2025-05-20arm64: dts: mediatek: mt7988a-bpi-r4: enable xsphyFrank Wunderlich
Enable XS-Phy on Bananapi R4 for pcie2. Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20250422132438.15735-9-linux@fw-web.de Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2025-05-20arm64: dts: mediatek: mt7988: Add xsphy for ssusb0/pcie2Frank Wunderlich
First usb and third pcie controller on mt7988 need a xs-phy to work properly. Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20250422132438.15735-8-linux@fw-web.de Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2025-05-20arm64: dts: mediatek: mt7988a-bpi-r4: allow hw variants of bpi-r4Frank Wunderlich
Sinovoip has released other variants of Bananapi-R4 board. The known changes affecting only the LAN SFP+ slot which is replaced by a 2.5G phy with optional PoE. Just move the common parts to a new dtsi and keep differences (only i2c for lan-sfp) in dts. Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogiaocchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20250422132438.15735-3-linux@fw-web.de Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2025-05-20arm64: dts: renesas: white-hawk-ard-audio: Fix TPU0 groupsThuan Nguyen
White Hawk ARD audio uses a clock generated by the TPU, but commit 3d144ef10a44 ("pinctrl: renesas: r8a779g0: Fix TPU suffixes") renamed pin group "tpu_to0_a" to "tpu_to0_b". Update DTS accordingly otherwise the sound driver does not receive a clock signal. Fixes: 3d144ef10a448f89 ("pinctrl: renesas: r8a779g0: Fix TPU suffixes") Signed-off-by: Thuan Nguyen <thuan.nguyen-hong@banvien.com.vn> Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/TYCPR01MB8740608B675365215ADB0374B49CA@TYCPR01MB8740.jpnprd01.prod.outlook.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
generated by cgit (git 2.34.1) at 2025-06-12 15:10:28 +0000