| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "hung_task: extend blocking task stacktrace dump to semaphore" from
Lance Yang enhances the hung task detector.
The detector presently dumps the blocking tasks's stack when it is
blocked on a mutex. Lance's series extends this to semaphores
- "nilfs2: improve sanity checks in dirty state propagation" from
Wentao Liang addresses a couple of minor flaws in nilfs2
- "scripts/gdb: Fixes related to lx_per_cpu()" from Illia Ostapyshyn
fixes a couple of issues in the gdb scripts
- "Support kdump with LUKS encryption by reusing LUKS volume keys" from
Coiby Xu addresses a usability problem with kdump.
When the dump device is LUKS-encrypted, the kdump kernel may not have
the keys to the encrypted filesystem. A full writeup of this is in
the series [0/N] cover letter
- "sysfs: add counters for lockups and stalls" from Max Kellermann adds
/sys/kernel/hardlockup_count and /sys/kernel/hardlockup_count and
/sys/kernel/rcu_stall_count
- "fork: Page operation cleanups in the fork code" from Pasha Tatashin
implements a number of code cleanups in fork.c
- "scripts/gdb/symbols: determine KASLR offset on s390 during early
boot" from Ilya Leoshkevich fixes some s390 issues in the gdb
scripts
* tag 'mm-nonmm-stable-2025-05-31-15-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (67 commits)
llist: make llist_add_batch() a static inline
delayacct: remove redundant code and adjust indentation
squashfs: add optional full compressed block caching
crash_dump, nvme: select CONFIGFS_FS as built-in
scripts/gdb/symbols: determine KASLR offset on s390 during early boot
scripts/gdb/symbols: factor out pagination_off()
scripts/gdb/symbols: factor out get_vmlinux()
kernel/panic.c: format kernel-doc comments
mailmap: update and consolidate Casey Connolly's name and email
nilfs2: remove wbc->for_reclaim handling
fork: define a local GFP_VMAP_STACK
fork: check charging success before zeroing stack
fork: clean-up naming of vm_stack/vm_struct variables in vmap stacks code
fork: clean-up ifdef logic around stack allocation
kernel/rcu/tree_stall: add /sys/kernel/rcu_stall_count
kernel/watchdog: add /sys/kernel/{hard,soft}lockup_count
x86/crash: make the page that stores the dm crypt keys inaccessible
x86/crash: pass dm crypt keys to kdump kernel
Revert "x86/mm: Remove unused __set_memory_prot()"
crash_dump: retrieve dm crypt keys in kdump kernel
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "Add folio_mk_pte()" from Matthew Wilcox simplifies the act of
creating a pte which addresses the first page in a folio and reduces
the amount of plumbing which architecture must implement to provide
this.
- "Misc folio patches for 6.16" from Matthew Wilcox is a shower of
largely unrelated folio infrastructure changes which clean things up
and better prepare us for future work.
- "memory,x86,acpi: hotplug memory alignment advisement" from Gregory
Price adds early-init code to prevent x86 from leaving physical
memory unused when physical address regions are not aligned to memory
block size.
- "mm/compaction: allow more aggressive proactive compaction" from
Michal Clapinski provides some tuning of the (sadly, hard-coded (more
sadly, not auto-tuned)) thresholds for our invokation of proactive
compaction. In a simple test case, the reduction of a guest VM's
memory consumption was dramatic.
- "Minor cleanups and improvements to swap freeing code" from Kemeng
Shi provides some code cleaups and a small efficiency improvement to
this part of our swap handling code.
- "ptrace: introduce PTRACE_SET_SYSCALL_INFO API" from Dmitry Levin
adds the ability for a ptracer to modify syscalls arguments. At this
time we can alter only "system call information that are used by
strace system call tampering, namely, syscall number, syscall
arguments, and syscall return value.
This series should have been incorporated into mm.git's "non-MM"
branch, but I goofed.
- "fs/proc: extend the PAGEMAP_SCAN ioctl to report guard regions" from
Andrei Vagin extends the info returned by the PAGEMAP_SCAN ioctl
against /proc/pid/pagemap. This permits CRIU to more efficiently get
at the info about guard regions.
- "Fix parameter passed to page_mapcount_is_type()" from Gavin Shan
implements that fix. No runtime effect is expected because
validate_page_before_insert() happens to fix up this error.
- "kernel/events/uprobes: uprobe_write_opcode() rewrite" from David
Hildenbrand basically brings uprobe text poking into the current
decade. Remove a bunch of hand-rolled implementation in favor of
using more current facilities.
- "mm/ptdump: Drop assumption that pxd_val() is u64" from Anshuman
Khandual provides enhancements and generalizations to the pte dumping
code. This might be needed when 128-bit Page Table Descriptors are
enabled for ARM.
- "Always call constructor for kernel page tables" from Kevin Brodsky
ensures that the ctor/dtor is always called for kernel pgtables, as
it already is for user pgtables.
This permits the addition of more functionality such as "insert hooks
to protect page tables". This change does result in various
architectures performing unnecesary work, but this is fixed up where
it is anticipated to occur.
- "Rust support for mm_struct, vm_area_struct, and mmap" from Alice
Ryhl adds plumbing to permit Rust access to core MM structures.
- "fix incorrectly disallowed anonymous VMA merges" from Lorenzo
Stoakes takes advantage of some VMA merging opportunities which we've
been missing for 15 years.
- "mm/madvise: batch tlb flushes for MADV_DONTNEED and MADV_FREE" from
SeongJae Park optimizes process_madvise()'s TLB flushing.
Instead of flushing each address range in the provided iovec, we
batch the flushing across all the iovec entries. The syscall's cost
was approximately halved with a microbenchmark which was designed to
load this particular operation.
- "Track node vacancy to reduce worst case allocation counts" from
Sidhartha Kumar makes the maple tree smarter about its node
preallocation.
stress-ng mmap performance increased by single-digit percentages and
the amount of unnecessarily preallocated memory was dramaticelly
reduced.
- "mm/gup: Minor fix, cleanup and improvements" from Baoquan He removes
a few unnecessary things which Baoquan noted when reading the code.
- ""Enhance sysfs handling for memory hotplug in weighted interleave"
from Rakie Kim "enhances the weighted interleave policy in the memory
management subsystem by improving sysfs handling, fixing memory
leaks, and introducing dynamic sysfs updates for memory hotplug
support". Fixes things on error paths which we are unlikely to hit.
- "mm/damon: auto-tune DAMOS for NUMA setups including tiered memory"
from SeongJae Park introduces new DAMOS quota goal metrics which
eliminate the manual tuning which is required when utilizing DAMON
for memory tiering.
- "mm/vmalloc.c: code cleanup and improvements" from Baoquan He
provides cleanups and small efficiency improvements which Baoquan
found via code inspection.
- "vmscan: enforce mems_effective during demotion" from Gregory Price
changes reclaim to respect cpuset.mems_effective during demotion when
possible. because presently, reclaim explicitly ignores
cpuset.mems_effective when demoting, which may cause the cpuset
settings to violated.
This is useful for isolating workloads on a multi-tenant system from
certain classes of memory more consistently.
- "Clean up split_huge_pmd_locked() and remove unnecessary folio
pointers" from Gavin Guo provides minor cleanups and efficiency gains
in in the huge page splitting and migrating code.
- "Use kmem_cache for memcg alloc" from Huan Yang creates a slab cache
for `struct mem_cgroup', yielding improved memory utilization.
- "add max arg to swappiness in memory.reclaim and lru_gen" from
Zhongkun He adds a new "max" argument to the "swappiness=" argument
for memory.reclaim MGLRU's lru_gen.
This directs proactive reclaim to reclaim from only anon folios
rather than file-backed folios.
- "kexec: introduce Kexec HandOver (KHO)" from Mike Rapoport is the
first step on the path to permitting the kernel to maintain existing
VMs while replacing the host kernel via file-based kexec. At this
time only memblock's reserve_mem is preserved.
- "mm: Introduce for_each_valid_pfn()" from David Woodhouse provides
and uses a smarter way of looping over a pfn range. By skipping
ranges of invalid pfns.
- "sched/numa: Skip VMA scanning on memory pinned to one NUMA node via
cpuset.mems" from Libo Chen removes a lot of pointless VMA scanning
when a task is pinned a single NUMA mode.
Dramatic performance benefits were seen in some real world cases.
- "JFS: Implement migrate_folio for jfs_metapage_aops" from Shivank
Garg addresses a warning which occurs during memory compaction when
using JFS.
- "move all VMA allocation, freeing and duplication logic to mm" from
Lorenzo Stoakes moves some VMA code from kernel/fork.c into the more
appropriate mm/vma.c.
- "mm, swap: clean up swap cache mapping helper" from Kairui Song
provides code consolidation and cleanups related to the folio_index()
function.
- "mm/gup: Cleanup memfd_pin_folios()" from Vishal Moola does that.
- "memcg: Fix test_memcg_min/low test failures" from Waiman Long
addresses some bogus failures which are being reported by the
test_memcontrol selftest.
- "eliminate mmap() retry merge, add .mmap_prepare hook" from Lorenzo
Stoakes commences the deprecation of file_operations.mmap() in favor
of the new file_operations.mmap_prepare().
The latter is more restrictive and prevents drivers from messing with
things in ways which, amongst other problems, may defeat VMA merging.
- "memcg: decouple memcg and objcg stocks"" from Shakeel Butt decouples
the per-cpu memcg charge cache from the objcg's one.
This is a step along the way to making memcg and objcg charging
NMI-safe, which is a BPF requirement.
- "mm/damon: minor fixups and improvements for code, tests, and
documents" from SeongJae Park is yet another batch of miscellaneous
DAMON changes. Fix and improve minor problems in code, tests and
documents.
- "memcg: make memcg stats irq safe" from Shakeel Butt converts memcg
stats to be irq safe. Another step along the way to making memcg
charging and stats updates NMI-safe, a BPF requirement.
- "Let unmap_hugepage_range() and several related functions take folio
instead of page" from Fan Ni provides folio conversions in the
hugetlb code.
* tag 'mm-stable-2025-05-31-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (285 commits)
mm: pcp: increase pcp->free_count threshold to trigger free_high
mm/hugetlb: convert use of struct page to folio in __unmap_hugepage_range()
mm/hugetlb: refactor __unmap_hugepage_range() to take folio instead of page
mm/hugetlb: refactor unmap_hugepage_range() to take folio instead of page
mm/hugetlb: pass folio instead of page to unmap_ref_private()
memcg: objcg stock trylock without irq disabling
memcg: no stock lock for cpu hot-unplug
memcg: make __mod_memcg_lruvec_state re-entrant safe against irqs
memcg: make count_memcg_events re-entrant safe against irqs
memcg: make mod_memcg_state re-entrant safe against irqs
memcg: move preempt disable to callers of memcg_rstat_updated
memcg: memcg_rstat_updated re-entrant safe against irqs
mm: khugepaged: decouple SHMEM and file folios' collapse
selftests/eventfd: correct test name and improve messages
alloc_tag: check mem_profiling_support in alloc_tag_init
Docs/damon: update titles and brief introductions to explain DAMOS
selftests/damon/_damon_sysfs: read tried regions directories in order
mm/damon/tests/core-kunit: add a test for damos_set_filters_default_reject()
mm/damon/paddr: remove unused variable, folio_list, in damon_pa_stat()
mm/damon/sysfs-schemes: fix wrong comment on damons_sysfs_quota_goal_metric_strs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull compiler version requirement update from Arnd Bergmann:
"Require gcc-8 and binutils-2.30
x86 already uses gcc-8 as the minimum version, this changes all other
architectures to the same version. gcc-8 is used is Debian 10 and Red
Hat Enterprise Linux 8, both of which are still supported, and
binutils 2.30 is the oldest corresponding version on those.
Ubuntu Pro 18.04 and SUSE Linux Enterprise Server 15 both use gcc-7 as
the system compiler but additionally include toolchains that remain
supported.
With the new minimum toolchain versions, a number of workarounds for
older versions can be dropped, in particular on x86_64 and arm64.
Importantly, the updated compiler version allows removing two of the
five remaining gcc plugins, as support for sancov and structeak
features is already included in modern compiler versions.
I tried collecting the known changes that are possible based on the
new toolchain version, but expect that more cleanups will be possible.
Since this touches multiple architectures, I merged the patches
through the asm-generic tree."
* tag 'gcc-minimum-version-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
Makefile.kcov: apply needed compiler option unconditionally in CFLAGS_KCOV
Documentation: update binutils-2.30 version reference
gcc-plugins: remove SANCOV gcc plugin
Kbuild: remove structleak gcc plugin
arm64: drop binutils version checks
raid6: skip avx512 checks
kbuild: require gcc-8 and binutils-2.30
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"There are 11 newly supported SoCs, but these are all either new
variants of existing designs, or straight reuses of the existing chip
in a new package:
- RK3562 is a new chip based on the old Cortex-A53 core, apparently a
low-cost version of the Cortex-A55 based RK3568/RK3566.
- NXP i.MX94 is a minor variation of i.MX93/i.MX95 with a different
set of on-chip peripherals.
- Renesas RZ/V2N (R9A09G056) is a new member of the larger RZ/V2
family
- Amlogic S6/S7/S7D
- Samsung Exynos7870 is an older chip similar to Exynos7885
- WonderMedia wm8950 is a minor variation on the wm8850 chip
- Amlogic s805y is almost idential to s805x
- Allwinner A523 is similar to A527 and T527
- Qualcomm MSM8926 is a variant of MSM8226
- Qualcomm Snapdragon X1P42100 is related to R1E80100
There are also 65 boards, including reference designs for the chips
above, this includes
- 12 new boards based on TI K3 series chips, most of them from
Toradex
- 10 devices using Rockchips RK35xx and PX30 chips
- 2 phones and 2 laptops based on Qualcomm Snapdragon designs
- 10 NXP i.MX8/i.MX9 boards, mostly for embedded/industrial uses
- 3 Samsung Galaxy phones based on Exynos7870
- 5 Allwinner based boards using a variety of ARMv8 chips
- 9 32-bit machines, each based on a different SoC family
Aside from the new hardware, there is the usual set of cleanups and
newly added hardware support on existing machines, for a total of 965
devicetree changesets"
* tag 'soc-dt-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (956 commits)
MAINTAINERS, mailmap: update Sven Peter's email address
arm64: dts: renesas: rzg3e-smarc-som: Reduce I2C2 clock frequency
arm64: dts: nuvoton: Add pinctrl
ARM: dts: samsung: sp5v210-aries: Align wifi node name with bindings
arm64: dts: blaize-blzp1600: Enable GPIO support
dt-bindings: clock: socfpga: convert to yaml
arm64: dts: rockchip: move rk3562 pinctrl node outside the soc node
arm64: dts: rockchip: fix rk3562 pcie unit addresses
arm64: dts: rockchip: move rk3528 pinctrl node outside the soc node
arm64: dts: rockchip: remove a double-empty line from rk3576 core dtsi
arm64: dts: rockchip: move rk3576 pinctrl node outside the soc node
arm64: dts: rockchip: fix rk3576 pcie unit addresses
arm64: dts: rockchip: Drop assigned-clock* from cpu nodes on rk3588
arm64: dts: rockchip: Add missing SFC power-domains to rk3576
Revert "arm64: dts: mediatek: mt8390-genio-common: Add firmware-name for scp0"
arm64: dts: mediatek: mt8188: Address binding warnings for MDP3 nodes
arm64: dts: mt6359: Rename RTC node to match binding expectations
arm64: dts: mt8365-evk: Add goodix touchscreen support
arm64: dts: mediatek: mt8188: Add missing #reset-cells property
arm64: dts: airoha: en7581: Add PCIe nodes to EN7581 SoC evaluation board
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC defconfig updates from Arnd Bergmann:
"The usual defconfig updates enable configuration options for drivers
that got added. A few SoC specific options are enabled in Kconfig
files instead, in place of the defconfig files"
* tag 'soc-defconfig-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: defconfig: enable ACPM protocol and Exynos mailbox
arm64: defconfig: Enable configs for MediaTek Genio EVK boards
arm64: defconfig: mediatek: enable PHY drivers
arm64: defconfig: Enable Rockchip SAI and ES8328
arm64: defconfig: Add Toradex Embedded Controller config
arm64: defconfig: Enable TPIC2810 GPIO expander
riscv: defconfig: spacemit: enable clock controller driver for SpacemiT K1
arm64: defconfig: Enable TMP102 as module
arm64: defconfig: Enable hwspinlock and eQEP for K3
arm64: defconfig: Add CDNS_DSI and CDNS_PHY config
riscv: defconfig: spacemit: enable gpio support for K1 SoC
arm64: defconfig: Enable IPQ5424 RDP466 base configs
riscv: Enable PM_GENERIC_DOMAINS for T-Head SoCs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"Not a lot going on in the EFI tree this cycle. The only thing that
stands out is the new support for SBAT metadata, which was a bit
contentious when it was first proposed, because in the initial
incarnation, it would have required us to maintain a revocation index,
and bump it each time a vulnerability affecting UEFI secure boot got
fixed. This was shot down for obvious reasons.
This time, only the changes needed to emit the SBAT section into the
PE/COFF image are being carried upstream, and it is up to the distros
to decide what to put in there when creating and signing the build.
This only has the EFI zboot bits (which the distros will be using for
arm64); the x86 bzImage changes should be arriving next cycle,
presumably via the -tip tree.
Summary:
- Add support for emitting a .sbat section into the EFI zboot image,
so that downstreams can easily include revocation metadata in the
signed EFI images
- Align PE symbolic constant names with other projects
- Bug fix for the efi_test module
- Log the physical address and size of the EFI memory map when
failing to map it
- A kerneldoc fix for the EFI stub code"
* tag 'efi-next-for-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
include: pe.h: Fix PE definitions
efi/efi_test: Fix missing pending status update in getwakeuptime
efi: zboot specific mechanism for embedding SBAT section
efi/libstub: Describe missing 'out' parameter in efi_load_initrd
efi: Improve logging around memmap init
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.16 (take five)
- Reduce I2C2 clock frequency on the RZ/G3E SMARC SoM.
* tag 'renesas-dts-for-v6.16-tag5' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: rzg3e-smarc-som: Reduce I2C2 clock frequency
Link: https://lore.kernel.org/r/cover.1748355530.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Pull kvm updates from Paolo Bonzini:
"As far as x86 goes this pull request "only" includes TDX host support.
Quotes are appropriate because (at 6k lines and 100+ commits) it is
much bigger than the rest, which will come later this week and
consists mostly of bugfixes and selftests. s390 changes will also come
in the second batch.
ARM:
- Add large stage-2 mapping (THP) support for non-protected guests
when pKVM is enabled, clawing back some performance.
- Enable nested virtualisation support on systems that support it,
though it is disabled by default.
- Add UBSAN support to the standalone EL2 object used in nVHE/hVHE
and protected modes.
- Large rework of the way KVM tracks architecture features and links
them with the effects of control bits. While this has no functional
impact, it ensures correctness of emulation (the data is
automatically extracted from the published JSON files), and helps
dealing with the evolution of the architecture.
- Significant changes to the way pKVM tracks ownership of pages,
avoiding page table walks by storing the state in the hypervisor's
vmemmap. This in turn enables the THP support described above.
- New selftest checking the pKVM ownership transition rules
- Fixes for FEAT_MTE_ASYNC being accidentally advertised to guests
even if the host didn't have it.
- Fixes for the address translation emulation, which happened to be
rather buggy in some specific contexts.
- Fixes for the PMU emulation in NV contexts, decoupling PMCR_EL0.N
from the number of counters exposed to a guest and addressing a
number of issues in the process.
- Add a new selftest for the SVE host state being corrupted by a
guest.
- Keep HCR_EL2.xMO set at all times for systems running with the
kernel at EL2, ensuring that the window for interrupts is slightly
bigger, and avoiding a pretty bad erratum on the AmpereOne HW.
- Add workaround for AmpereOne's erratum AC04_CPU_23, which suffers
from a pretty bad case of TLB corruption unless accesses to HCR_EL2
are heavily synchronised.
- Add a per-VM, per-ITS debugfs entry to dump the state of the ITS
tables in a human-friendly fashion.
- and the usual random cleanups.
LoongArch:
- Don't flush tlb if the host supports hardware page table walks.
- Add KVM selftests support.
RISC-V:
- Add vector registers to get-reg-list selftest
- VCPU reset related improvements
- Remove scounteren initialization from VCPU reset
- Support VCPU reset from userspace using set_mpstate() ioctl
x86:
- Initial support for TDX in KVM.
This finally makes it possible to use the TDX module to run
confidential guests on Intel processors. This is quite a large
series, including support for private page tables (managed by the
TDX module and mirrored in KVM for efficiency), forwarding some
TDVMCALLs to userspace, and handling several special VM exits from
the TDX module.
This has been in the works for literally years and it's not really
possible to describe everything here, so I'll defer to the various
merge commits up to and including commit 7bcf7246c42a ('Merge
branch 'kvm-tdx-finish-initial' into HEAD')"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (248 commits)
x86/tdx: mark tdh_vp_enter() as __flatten
Documentation: virt/kvm: remove unreferenced footnote
RISC-V: KVM: lock the correct mp_state during reset
KVM: arm64: Fix documentation for vgic_its_iter_next()
KVM: arm64: np-guest CMOs with PMD_SIZE fixmap
KVM: arm64: Stage-2 huge mappings for np-guests
KVM: arm64: Add a range to pkvm_mappings
KVM: arm64: Convert pkvm_mappings to interval tree
KVM: arm64: Add a range to __pkvm_host_test_clear_young_guest()
KVM: arm64: Add a range to __pkvm_host_wrprotect_guest()
KVM: arm64: Add a range to __pkvm_host_unshare_guest()
KVM: arm64: Add a range to __pkvm_host_share_guest()
KVM: arm64: Introduce for_each_hyp_page
KVM: arm64: Handle huge mappings for np-guest CMOs
KVM: arm64: nv: Release faulted-in VNCR page from mmu_lock critical section
KVM: arm64: nv: Handle TLBI S1E2 for VNCR invalidation with mmu_lock held
KVM: arm64: nv: Hold mmu_lock when invalidating VNCR SW-TLB before translating
RISC-V: KVM: add KVM_CAP_RISCV_MP_STATE_RESET
RISC-V: KVM: Remove scounteren initialization
KVM: RISC-V: remove unnecessary SBI reset state
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Fix and improve BTF deduplication of identical BTF types (Alan
Maguire and Andrii Nakryiko)
- Support up to 12 arguments in BPF trampoline on arm64 (Xu Kuohai and
Alexis Lothoré)
- Support load-acquire and store-release instructions in BPF JIT on
riscv64 (Andrea Parri)
- Fix uninitialized values in BPF_{CORE,PROBE}_READ macros (Anton
Protopopov)
- Streamline allowed helpers across program types (Feng Yang)
- Support atomic update for hashtab of BPF maps (Hou Tao)
- Implement json output for BPF helpers (Ihor Solodrai)
- Several s390 JIT fixes (Ilya Leoshkevich)
- Various sockmap fixes (Jiayuan Chen)
- Support mmap of vmlinux BTF data (Lorenz Bauer)
- Support BPF rbtree traversal and list peeking (Martin KaFai Lau)
- Tests for sockmap/sockhash redirection (Michal Luczaj)
- Introduce kfuncs for memory reads into dynptrs (Mykyta Yatsenko)
- Add support for dma-buf iterators in BPF (T.J. Mercier)
- The verifier support for __bpf_trap() (Yonghong Song)
* tag 'bpf-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (135 commits)
bpf, arm64: Remove unused-but-set function and variable.
selftests/bpf: Add tests with stack ptr register in conditional jmp
bpf: Do not include stack ptr register in precision backtracking bookkeeping
selftests/bpf: enable many-args tests for arm64
bpf, arm64: Support up to 12 function arguments
bpf: Check rcu_read_lock_trace_held() in bpf_map_lookup_percpu_elem()
bpf: Avoid __bpf_prog_ret0_warn when jit fails
bpftool: Add support for custom BTF path in prog load/loadall
selftests/bpf: Add unit tests with __bpf_trap() kfunc
bpf: Warn with __bpf_trap() kfunc maybe due to uninitialized variable
bpf: Remove special_kfunc_set from verifier
selftests/bpf: Add test for open coded dmabuf_iter
selftests/bpf: Add test for dmabuf_iter
bpf: Add open coded dmabuf iterator
bpf: Add dmabuf iterator
dma-buf: Rename debugfs symbols
bpf: Fix error return value in bpf_copy_from_user_dynptr
libbpf: Use mmap to parse vmlinux BTF from sysfs
selftests: bpf: Add a test for mmapable vmlinux BTF
btf: Allow mmap of vmlinux btf
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The headline feature is the re-enablement of support for Arm's
Scalable Matrix Extension (SME) thanks to a bumper crop of fixes
from Mark Rutland.
If matrices aren't your thing, then Ryan's page-table optimisation
work is much more interesting.
Summary:
ACPI, EFI and PSCI:
- Decouple Arm's "Software Delegated Exception Interface" (SDEI)
support from the ACPI GHES code so that it can be used by platforms
booted with device-tree
- Remove unnecessary per-CPU tracking of the FPSIMD state across EFI
runtime calls
- Fix a node refcount imbalance in the PSCI device-tree code
CPU Features:
- Ensure register sanitisation is applied to fields in ID_AA64MMFR4
- Expose AIDR_EL1 to userspace via sysfs, primarily so that KVM
guests can reliably query the underlying CPU types from the VMM
- Re-enabling of SME support (CONFIG_ARM64_SME) as a result of fixes
to our context-switching, signal handling and ptrace code
Entry code:
- Hook up TIF_NEED_RESCHED_LAZY so that CONFIG_PREEMPT_LAZY can be
selected
Memory management:
- Prevent BSS exports from being used by the early PI code
- Propagate level and stride information to the low-level TLB
invalidation routines when operating on hugetlb entries
- Use the page-table contiguous hint for vmap() mappings with
VM_ALLOW_HUGE_VMAP where possible
- Optimise vmalloc()/vmap() page-table updates to use "lazy MMU mode"
and hook this up on arm64 so that the trailing DSB (used to publish
the updates to the hardware walker) can be deferred until the end
of the mapping operation
- Extend mmap() randomisation for 52-bit virtual addresses (on par
with 48-bit addressing) and remove limited support for
randomisation of the linear map
Perf and PMUs:
- Add support for probing the CMN-S3 driver using ACPI
- Minor driver fixes to the CMN, Arm-NI and amlogic PMU drivers
Selftests:
- Fix FPSIMD and SME tests to align with the freshly re-enabled SME
support
- Fix default setting of the OUTPUT variable so that tests are
installed in the right location
vDSO:
- Replace raw counter access from inline assembly code with a call to
the the __arch_counter_get_cntvct() helper function
Miscellaneous:
- Add some missing header inclusions to the CCA headers
- Rework rendering of /proc/cpuinfo to follow the x86-approach and
avoid repeated buffer expansion (the user-visible format remains
identical)
- Remove redundant selection of CONFIG_CRC32
- Extend early error message when failing to map the device-tree
blob"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (83 commits)
arm64: cputype: Add cputype definition for HIP12
arm64: el2_setup.h: Make __init_el2_fgt labels consistent, again
perf/arm-cmn: Add CMN S3 ACPI binding
arm64/boot: Disallow BSS exports to startup code
arm64/boot: Move global CPU override variables out of BSS
arm64/boot: Move init_pgdir[] and init_idmap_pgdir[] into __pi_ namespace
perf/arm-cmn: Initialise cmn->cpu earlier
kselftest/arm64: Set default OUTPUT path when undefined
arm64: Update comment regarding values in __boot_cpu_mode
arm64: mm: Drop redundant check in pmd_trans_huge()
arm64/mm: Re-organise setting up FEAT_S1PIE registers PIRE0_EL1 and PIR_EL1
arm64/mm: Permit lazy_mmu_mode to be nested
arm64/mm: Disable barrier batching in interrupt contexts
arm64/cpuinfo: only show one cpu's info in c_show()
arm64/mm: Batch barriers when updating kernel mappings
mm/vmalloc: Enter lazy mmu mode while manipulating vmalloc ptes
arm64/mm: Support huge pte-mapped pages in vmap
mm/vmalloc: Gracefully unmap huge ptes
mm/vmalloc: Warn on improper use of vunmap_range()
arm64/mm: Hoist barriers out of set_ptes_anysz() loop
...
|
|
Pull drm updates from Dave Airlie:
"As part of building up nova-core/nova-drm pieces we've brought in some
rust abstractions through this tree, aux bus being the main one, with
devres changes also in the driver-core tree. Along with the drm core
abstractions and enough nova-core/nova-drm to use them. This is still
all stub work under construction, to build the nova driver upstream.
The other big NVIDIA related one is nouveau adds support for
Hopper/Blackwell GPUs, this required a new GSP firmware update to
570.144, and a bunch of rework in order to support multiple fw
interfaces.
There is also the introduction of an asahi uapi header file as a
precursor to getting the real driver in later, but to unblock
userspace mesa packages while the driver is trapped behind rust
enablement.
Otherwise it's the usual mixture of stuff all over, amdgpu, i915/xe,
and msm being the main ones, and some changes to vsprintf.
new drivers:
- bring in the asahi uapi header standalone
- nova-drm: stub driver
rust dependencies (for nova-core):
- auxiliary
- bus abstractions
- driver registration
- sample driver
- devres changes from driver-core
- revocable changes
core:
- add Apple fourcc modifiers
- add virtio capset definitions
- extend EXPORT_SYNC_FILE for timeline syncobjs
- convert to devm_platform_ioremap_resource
- refactor shmem helper page pinning
- DP powerup/down link helpers
- extended %p4cc in vsprintf.c to support fourcc prints
- change vsprintf %p4cn to %p4chR, remove %p4cn
- Add drm_file_err function
- IN_FORMATS_ASYNC property
- move sitronix from tiny to their own subdir
rust:
- add drm core infrastructure rust abstractions
(device/driver, ioctl, file, gem)
dma-buf:
- adjust sg handling to not cache map on attach
- allow setting dma-device for import
- Add a helper to sort and deduplicate dma_fence arrays
docs:
- updated drm scheduler docs
- fbdev todo update
- fb rendering
- actual brightness
ttm:
- fix delayed destroy resv object
bridge:
- add kunit tests
- convert tc358775 to atomic
- convert drivers to devm_drm_bridge_alloc
- convert rk3066_hdmi to bridge driver
scheduler:
- add kunit tests
panel:
- refcount panels to improve lifetime handling
- Powertip PH128800T004-ZZA01
- NLT NL13676BC25-03F, Tianma TM070JDHG34-00
- Himax HX8279/HX8279-D DDIC
- Visionox G2647FB105
- Sitronix ST7571
- ZOTAC rotation quirk
vkms:
- allow attaching more displays
i915:
- xe3lpd display updates
- vrr refactor
- intel_display struct conversions
- xe2hpd memory type identification
- add link rate/count to i915_display_info
- cleanup VGA plane handling
- refactor HDCP GSC
- fix SLPC wait boosting reference counting
- add 20ms delay to engine reset
- fix fence release on early probe errors
xe:
- SRIOV updates
- BMG PCI ID update
- support separate firmware for each GT
- SVM fix, prelim SVM multi-device work
- export fan speed
- temp disable d3cold on BMG
- backup VRAM in PM notifier instead of suspend/freeze
- update xe_ttm_access_memory to use GPU for non-visible access
- fix guc_info debugfs for VFs
- use copy_from_user instead of __copy_from_user
- append PCIe gen5 limitations to xe_firmware document
amdgpu:
- DSC cleanup
- DC Scaling updates
- Fused I2C-over-AUX updates
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
- GC 9.5 updates
- SMU 13.x updates
- VCN / JPEG SR-IOV updates
amdkfd:
- Update error messages for SDMA
- Userptr updates
- XNACK fixes
radeon:
- CIK doorbell cleanup
nouveau:
- add support for NVIDIA r570 GSP firmware
- enable Hopper/Blackwell support
nova-core:
- fix task list
- register definition infrastructure
- move firmware into own rust module
- register auxiliary device for nova-drm
nova-drm:
- initial driver skeleton
msm:
- GPU:
- ACD (adaptive clock distribution) for X1-85
- drop fictional address_space_size
- improve GMU HFI response time out robustness
- fix crash when throttling during boot
- DPU:
- use single CTL path for flushing on DPU 5.x+
- improve SSPP allocation code for better sharing
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- DP:
- switch to new audio helpers
- better LTTPR handling
- DSI:
- Added support for SA8775P
- Added SAR2130P support
- HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
amdxdna:
- add dma-buf support
- allow empty command submits
renesas:
- add dma-buf support
- add zpos, alpha, blend support
panthor:
- fail properly for NO_MMAP bos
- add SET_LABEL ioctl
- debugfs BO dumping support
imagination:
- update DT bindings
- support TI AM68 GPU
hibmc:
- improve interrupt handling and HPD support
virtio:
- add panic handler support
rockchip:
- add RK3588 support
- add DP AUX bus panel support
ivpu:
- add heartbeat based hangcheck
mediatek:
- prepares support for MT8195/99 HDMIv2/DDCv2
anx7625:
- improve HPD
tegra:
- speed up firmware loading
* tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel: (1627 commits)
drm/nouveau/tegra: Fix error pointer vs NULL return in nvkm_device_tegra_resource_addr()
drm/xe: Default auto_link_downgrade status to false
drm/xe/guc: Make creation of SLPC debugfs files conditional
drm/i915/display: Add check for alloc_ordered_workqueue() and alloc_workqueue()
drm/i915/dp_mst: Work around Thunderbolt sink disconnect after SINK_COUNT_ESI read
drm/i915/ptl: Use everywhere the correct DDI port clock select mask
drm/nouveau/kms: add support for GB20x
drm/dp: add option to disable zero sized address only transactions.
drm/nouveau: add support for GB20x
drm/nouveau/gsp: add hal for fifo.chan.doorbell_handle
drm/nouveau: add support for GB10x
drm/nouveau/gf100-: track chan progress with non-WFI semaphore release
drm/nouveau/nv50-: separate CHANNEL_GPFIFO handling out from CHANNEL_DMA
drm/nouveau: add helper functions for allocating pinned/cpu-mapped bos
drm/nouveau: add support for GH100
drm/nouveau: improve handling of 64-bit BARs
drm/nouveau/gv100-: switch to volta semaphore methods
drm/nouveau/gsp: support deeper page tables in COPY_SERVER_RESERVED_PDES
drm/nouveau/gsp: init client VMMs with NV0080_CTRL_DMA_SET_PAGE_DIRECTORY
drm/nouveau/gsp: fetch level shift and PDE from BAR2 VMM
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- A fix for running as a Xen dom0 on the iMX8QXP Arm platform
- An update of the xen.config adding XEN_UNPOPULATED_ALLOC for better
support of PVH dom0
- A fix of the Xen balloon driver when running without
CONFIG_XEN_UNPOPULATED_ALLOC
- A fix of the dm_op Xen hypercall on Arm needed to pass user space
buffers to the hypervisor in certain configurations
* tag 'for-linus-6.16-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/arm: call uaccess_ttbr0_enable for dm_op hypercall
xen/x86: fix initial memory balloon target
xen: enable XEN_UNPOPULATED_ALLOC as part of xen.config
xen: swiotlb: Wire up map_resource callback
|
|
Remove unused-but-set function and variable to fix the build warning:
arch/arm64/net/bpf_jit_comp.c: In function 'arch_bpf_trampoline_size':
2547 | int nregs, ret;
| ^~~~~
Fixes: 9014cf56f13d ("bpf, arm64: Support up to 12 function arguments")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/bpf/20250528002704.21197-1-alexei.starovoitov@gmail.com
Closes: https://lore.kernel.org/oe-kbuild-all/202505280643.h0qYcSCM-lkp@intel.com/
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"This time around the pwm changes for the next release contain three
new drivers (loongson, mc33xs2410 and rzg2l-gpt) and the usual
collection of cleanups in both the core and drivers, support for new
variants in existing drivers, conversion of dt bindings to yaml and
documentation updates.
Thanks for contributions and reviews go to Alexey Charkov,
AngeloGioacchino Del Regno, Bartosz Golaszewski, Biju Das, Binbin
Zhou, Dan Carpenter, Dimitri Fedrau, Geert Uytterhoeven, George Stark,
Huacai Chen, Juxin Gao, Krzysztof Kozlowski, Kuninori Morimoto,
Laurent Pinchart, Neil Armstrong, Nuno Sá, Rob Herring, and Trevor
Gamblin"
* tag 'pwm/for-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (39 commits)
dt-bindings: timer: renesas,tpu: remove binding documentation
pwm: adp5585: make sure to include mod_devicetable.h
pwm: Tidyup PWM menu for Renesas
pwm: Restore alphabetic ordering in Kconfig and Makefile
pwm: Formally describe the procedure used to pick a hardware waveform setting
pwm: Let pwm_set_waveform_might_sleep() return 0 instead of 1 after rounding up
pwm: Let pwm_set_waveform_might_sleep() fail for exact but impossible requests
ARM: shmobile: defconfig: Enable more support for RZN1D-DB/EB
arm64: defconfig: Add Renesas MSIOF sound support
arm64: defconfig: Enable Renesas RZ/G2L GPT config
pwm: add support for NXPs high-side switch MC33XS2410
dt-bindings: pwm: add support for MC33XS2410
pwm: rzg2l-gpt: Accept requests for too high period length
dt-bindings: pwm: vt8500-pwm: Convert to YAML
dt-bindings: pwm: mediatek,pwm-disp: Add compatible for MT6893
pwm: Fix various formatting issues in kernel-doc
pwm: Add support for RZ/G2L GPT
dt-bindings: pwm: Add RZ/G2L GPT binding
pwm: Better document return value of pwm_round_waveform_might_sleep()
pwm: loongson: Fix an error code in probe()
...
|
|
Currently ARM64 bpf trampoline supports up to 8 function arguments.
According to the statistics from commit
473e3150e30a ("bpf, x86: allow function arguments up to 12 for TRACING"),
there are about 200 functions accept 9 to 12 arguments, so adding support
for up to 12 function arguments.
Due to bpf only supporting function arguments up to 16 bytes, according to
AAPCS64, starting from the first argument, each argument is first
attempted to be loaded to 1 or 2 smallest registers from x0-x7, if there
are no enough registers to hold the entire argument, then all remaining
arguments starting from this one are pushed to the stack for passing.
There are some non-trivial cases for which it is not possible to
correctly read arguments from/write arguments to the stack: for example
struct variables may have custom packing/alignment attributes that are
invisible in BTF info. Such cases are denied for now to make sure not to
read incorrect values.
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Co-developed-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20250527-many_args_arm64-v3-1-3faf7bb8e4a2@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
* for-next/vdso:
arm64: vdso: Use __arch_counter_get_cntvct()
|
|
* for-next/sme-fixes: (35 commits)
arm64/fpsimd: Allow CONFIG_ARM64_SME to be selected
arm64/fpsimd: ptrace: Gracefully handle errors
arm64/fpsimd: ptrace: Mandate SVE payload for streaming-mode state
arm64/fpsimd: ptrace: Do not present register data for inactive mode
arm64/fpsimd: ptrace: Save task state before generating SVE header
arm64/fpsimd: ptrace/prctl: Ensure VL changes leave task in a valid state
arm64/fpsimd: ptrace/prctl: Ensure VL changes do not resurrect stale data
arm64/fpsimd: Make clone() compatible with ZA lazy saving
arm64/fpsimd: Clear PSTATE.SM during clone()
arm64/fpsimd: Consistently preserve FPSIMD state during clone()
arm64/fpsimd: Remove redundant task->mm check
arm64/fpsimd: signal: Use SMSTOP behaviour in setup_return()
arm64/fpsimd: Add task_smstop_sm()
arm64/fpsimd: Factor out {sve,sme}_state_size() helpers
arm64/fpsimd: Clarify sve_sync_*() functions
arm64/fpsimd: ptrace: Consistently handle partial writes to NT_ARM_(S)SVE
arm64/fpsimd: signal: Consistently read FPSIMD context
arm64/fpsimd: signal: Mandate SVE payload for streaming-mode state
arm64/fpsimd: signal: Clear PSTATE.SM when restoring FPSIMD frame only
arm64/fpsimd: Do not discard modified SVE state
...
|
|
* for-next/mm:
arm64/boot: Disallow BSS exports to startup code
arm64/boot: Move global CPU override variables out of BSS
arm64/boot: Move init_pgdir[] and init_idmap_pgdir[] into __pi_ namespace
arm64: mm: Drop redundant check in pmd_trans_huge()
arm64/mm: Permit lazy_mmu_mode to be nested
arm64/mm: Disable barrier batching in interrupt contexts
arm64/mm: Batch barriers when updating kernel mappings
mm/vmalloc: Enter lazy mmu mode while manipulating vmalloc ptes
arm64/mm: Support huge pte-mapped pages in vmap
mm/vmalloc: Gracefully unmap huge ptes
mm/vmalloc: Warn on improper use of vunmap_range()
arm64/mm: Hoist barriers out of set_ptes_anysz() loop
arm64: hugetlb: Use __set_ptes_anysz() and __ptep_get_and_clear_anysz()
arm64/mm: Refactor __set_ptes() and __ptep_get_and_clear()
mm/page_table_check: Batch-check pmds/puds just like ptes
arm64: hugetlb: Refine tlb maintenance scope
arm64: hugetlb: Cleanup huge_pte size discovery mechanisms
arm64: pageattr: Explicitly bail out when changing permissions for vmalloc_huge mappings
arm64: Support ARM64_VA_BITS=52 when setting ARCH_MMAP_RND_BITS_MAX
arm64/mm: Remove randomization of the linear map
|
|
* for-next/misc:
arm64/cpuinfo: only show one cpu's info in c_show()
arm64: Extend pr_crit message on invalid FDT
arm64: Kconfig: remove unnecessary selection of CRC32
arm64: Add missing includes for mem_encrypt
|
|
Merge in for-next/fixes, as subsequent improvements to our early PI
code that disallow BSS exports depend on the 'arm64_use_ng_mappings'
fix here.
* for-next/fixes:
arm64: cpufeature: Move arm64_use_ng_mappings to the .data section to prevent wrong idmap generation
arm64: errata: Add missing sentinels to Spectre-BHB MIDR arrays
|
|
* for-next/entry:
arm64: el2_setup.h: Make __init_el2_fgt labels consistent, again
arm64: Update comment regarding values in __boot_cpu_mode
arm64/mm: Re-organise setting up FEAT_S1PIE registers PIRE0_EL1 and PIR_EL1
arm64: enable PREEMPT_LAZY
|
|
* for-next/efi:
arm64/fpsimd: Avoid unnecessary per-CPU buffers for EFI runtime calls
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Fix memcpy_sglist to handle partially overlapping SG lists
- Use memcpy_sglist to replace null skcipher
- Rename CRYPTO_TESTS to CRYPTO_BENCHMARK
- Flip CRYPTO_MANAGER_DISABLE_TEST into CRYPTO_SELFTESTS
- Hide CRYPTO_MANAGER
- Add delayed freeing of driver crypto_alg structures
Compression:
- Allocate large buffers on first use instead of initialisation in scomp
- Drop destination linearisation buffer in scomp
- Move scomp stream allocation into acomp
- Add acomp scatter-gather walker
- Remove request chaining
- Add optional async request allocation
Hashing:
- Remove request chaining
- Add optional async request allocation
- Move partial block handling into API
- Add ahash support to hmac
- Fix shash documentation to disallow usage in hard IRQs
Algorithms:
- Remove unnecessary SIMD fallback code on x86 and arm/arm64
- Drop avx10_256 xts(aes)/ctr(aes) on x86
- Improve avx-512 optimisations for xts(aes)
- Move chacha arch implementations into lib/crypto
- Move poly1305 into lib/crypto and drop unused Crypto API algorithm
- Disable powerpc/poly1305 as it has no SIMD fallback
- Move sha256 arch implementations into lib/crypto
- Convert deflate to acomp
- Set block size correctly in cbcmac
Drivers:
- Do not use sg_dma_len before mapping in sun8i-ss
- Fix warm-reboot failure by making shutdown do more work in qat
- Add locking in zynqmp-sha
- Remove cavium/zip
- Add support for PCI device 0x17D8 to ccp
- Add qat_6xxx support in qat
- Add support for RK3576 in rockchip-rng
- Add support for i.MX8QM in caam
Others:
- Fix irq_fpu_usable/kernel_fpu_begin inconsistency during CPU bring-up
- Add new SEV/SNP platform shutdown API in ccp"
* tag 'v6.16-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (382 commits)
x86/fpu: Fix irq_fpu_usable() to return false during CPU onlining
crypto: qat - add missing header inclusion
crypto: api - Redo lookup on EEXIST
Revert "crypto: testmgr - Add hash export format testing"
crypto: marvell/cesa - Do not chain submitted requests
crypto: powerpc/poly1305 - add depends on BROKEN for now
Revert "crypto: powerpc/poly1305 - Add SIMD fallback"
crypto: ccp - Add missing tee info reg for teev2
crypto: ccp - Add missing bootloader info reg for pspv5
crypto: sun8i-ce - move fallback ahash_request to the end of the struct
crypto: octeontx2 - Use dynamic allocated memory region for lmtst
crypto: octeontx2 - Initialize cptlfs device info once
crypto: xts - Only add ecb if it is not already there
crypto: lrw - Only add ecb if it is not already there
crypto: testmgr - Add hash export format testing
crypto: testmgr - Use ahash for generic tfm
crypto: hmac - Add ahash support
crypto: testmgr - Ignore EEXIST on shash allocation
crypto: algapi - Add driver template support to crypto_inst_setname
crypto: shash - Set reqsize in shash_alg
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
"Cleanups for the kernel's CRC (cyclic redundancy check) code:
- Use __ro_after_init where appropriate
- Remove unnecessary static_key on s390
- Rename some source code files
- Rename the crc32 and crc32c crypto API modules
- Use subsys_initcall instead of arch_initcall
- Restore maintainers for crc_kunit.c
- Fold crc16_byte() into crc16.c
- Add some SPDX license identifiers"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crc32: add SPDX license identifier
lib/crc16: unexport crc16_table and crc16_byte()
w1: ds2406: use crc16() instead of crc16_byte() loop
MAINTAINERS: add crc_kunit.c back to CRC LIBRARY
lib/crc: make arch-optimized code use subsys_initcall
crypto: crc32 - remove "generic" from file and module names
x86/crc: drop "glue" from filenames
sparc/crc: drop "glue" from filenames
s390/crc: drop "glue" from filenames
powerpc/crc: rename crc32-vpmsum_core.S to crc-vpmsum-template.S
powerpc/crc: drop "glue" from filenames
arm64/crc: drop "glue" from filenames
arm/crc: drop "glue" from filenames
s390/crc32: Remove no-op module init and exit functions
s390/crc32: Remove have_vxrs static key
lib/crc: make the CPU feature static keys __ro_after_init
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.16
* New features:
- Add large stage-2 mapping support for non-protected pKVM guests,
clawing back some performance.
- Add UBSAN support to the standalone EL2 object used in nVHE/hVHE and
protected modes.
- Enable nested virtualisation support on systems that support it
(yes, it has been a long time coming), though it is disabled by
default.
* Improvements, fixes and cleanups:
- Large rework of the way KVM tracks architecture features and links
them with the effects of control bits. This ensures correctness of
emulation (the data is automatically extracted from the published
JSON files), and helps dealing with the evolution of the
architecture.
- Significant changes to the way pKVM tracks ownership of pages,
avoiding page table walks by storing the state in the hypervisor's
vmemmap. This in turn enables the THP support described above.
- New selftest checking the pKVM ownership transition rules
- Fixes for FEAT_MTE_ASYNC being accidentally advertised to guests
even if the host didn't have it.
- Fixes for the address translation emulation, which happened to be
rather buggy in some specific contexts.
- Fixes for the PMU emulation in NV contexts, decoupling PMCR_EL0.N
from the number of counters exposed to a guest and addressing a
number of issues in the process.
- Add a new selftest for the SVE host state being corrupted by a
guest.
- Keep HCR_EL2.xMO set at all times for systems running with the
kernel at EL2, ensuring that the window for interrupts is slightly
bigger, and avoiding a pretty bad erratum on the AmpereOne HW.
- Add workaround for AmpereOne's erratum AC04_CPU_23, which suffers
from a pretty bad case of TLB corruption unless accesses to HCR_EL2
are heavily synchronised.
- Add a per-VM, per-ITS debugfs entry to dump the state of the ITS
tables in a human-friendly fashion.
- and the usual random cleanups.
|
|
Lower the I2C2 bus clock frequency on the RZ/G3E SMARC SoM from 1MHz to
400kHz to improve compatibility with a wider range of I2C peripherals.
As the GreenPAK device is programmed to operate at 400kHz, the previous
1MHz setting was too aggressive, causing it to experience timing issues.
Fixes: f7a98e256ee3 ("arm64: dts: renesas: rzg3e-smarc-som: Add I2C2 device pincontrol")
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250518220812.1480696-1-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"A few last minute fixes:
- two driver fixes for samsung/google platforms, both addressing
mistakes in changes from the 6.15 merge window
- a revert for an allwinner devicetree change that caused problems
- a fix for an older regression with the LEDs on Marvell Armada 3720
- a defconfig change to enable chacha20 again after a crypto
subsystem change in 6.15 inadventently turned it off"
* tag 'soc-fixes-6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: defconfig: Ensure CRYPTO_CHACHA20_NEON is selected
arm64: dts: marvell: uDPU: define pinctrl state for alarm LEDs
Revert "arm64: dts: allwinner: h6: Use RSB for AXP805 PMIC connection"
soc: samsung: usi: prevent wrong bits inversion during unconfiguring
firmware: exynos-acpm: check saved RX before bailing out on empty RX queue
|
|
* kvm-arm64/misc-6.16:
: .
: Misc changes and improvements for 6.16:
:
: - Add a new selftest for the SVE host state being corrupted by a guest
:
: - Keep HCR_EL2.xMO set at all times for systems running with the kernel at EL2,
: ensuring that the window for interrupts is slightly bigger, and avoiding
: a pretty bad erratum on the AmpereOne HW
:
: - Replace a couple of open-coded on/off strings with str_on_off()
:
: - Get rid of the pKVM memblock sorting, which now appears to be superflous
:
: - Drop superflous clearing of ICH_LR_EOI in the LR when nesting
:
: - Add workaround for AmpereOne's erratum AC04_CPU_23, which suffers from
: a pretty bad case of TLB corruption unless accesses to HCR_EL2 are
: heavily synchronised
:
: - Add a per-VM, per-ITS debugfs entry to dump the state of the ITS tables
: in a human-friendly fashion
: .
KVM: arm64: Fix documentation for vgic_its_iter_next()
KVM: arm64: vgic-its: Add debugfs interface to expose ITS tables
arm64: errata: Work around AmpereOne's erratum AC04_CPU_23
KVM: arm64: nv: Remove clearing of ICH_LR<n>.EOI if ICH_LR<n>.HW == 1
KVM: arm64: Drop sort_memblock_regions()
KVM: arm64: selftests: Add test for SVE host corruption
KVM: arm64: Force HCR_EL2.xMO to 1 at all times in VHE mode
KVM: arm64: Replace ternary flags with str_on_off() helper
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/nv-nv:
: .
: Flick the switch on the NV support by adding the missing piece
: in the form of the VNCR page management. From the cover letter:
:
: "This is probably the most interesting bit of the whole NV adventure.
: So far, everything else has been a walk in the park, but this one is
: where the real fun takes place.
:
: With FEAT_NV2, most of the NV support revolves around tricking a guest
: into accessing memory while it tries to access system registers. The
: hypervisor's job is to handle the context switch of the actual
: registers with the state in memory as needed."
: .
KVM: arm64: nv: Release faulted-in VNCR page from mmu_lock critical section
KVM: arm64: nv: Handle TLBI S1E2 for VNCR invalidation with mmu_lock held
KVM: arm64: nv: Hold mmu_lock when invalidating VNCR SW-TLB before translating
KVM: arm64: Document NV caps and vcpu flags
KVM: arm64: Allow userspace to request KVM_ARM_VCPU_EL2*
KVM: arm64: nv: Remove dead code from ERET handling
KVM: arm64: nv: Plumb TLBI S1E2 into system instruction dispatch
KVM: arm64: nv: Add S1 TLB invalidation primitive for VNCR_EL2
KVM: arm64: nv: Program host's VNCR_EL2 to the fixmap address
KVM: arm64: nv: Handle VNCR_EL2 invalidation from MMU notifiers
KVM: arm64: nv: Handle mapping of VNCR_EL2 at EL2
KVM: arm64: nv: Handle VNCR_EL2-triggered faults
KVM: arm64: nv: Add userspace and guest handling of VNCR_EL2
KVM: arm64: nv: Add pseudo-TLB backing VNCR_EL2
KVM: arm64: nv: Don't adjust PSTATE.M when L2 is nesting
KVM: arm64: nv: Move TLBI range decoding to a helper
KVM: arm64: nv: Snapshot S1 ASID tagging information during walk
KVM: arm64: nv: Extract translation helper from the AT code
KVM: arm64: nv: Allocate VNCR page when required
arm64: sysreg: Add layout for VNCR_EL2
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/at-fixes-6.16:
: .
: Set of fixes for Address Translation (AT) instruction emulation,
: which affect the (not yet upstream) NV support.
:
: From the cover letter:
:
: "Here's a small series of fixes for KVM's implementation of address
: translation (aka the AT S1* instructions), addressing a number of
: issues in increasing levels of severity:
:
: - We misreport PAR_EL1.PTW in a number of occasions, including state
: that is not possible as per the architecture definition
:
: - We don't handle access faults at all, and that doesn't play very
: well with the rest of the VNCR stuff
:
: - AT S1E{0,1} from EL2 with HCR_EL2.{E2H,TGE}={1,1} will absolutely
: take the host down, no questions asked"
: .
KVM: arm64: Don't feed uninitialised data to HCR_EL2
KVM: arm64: Teach address translation about access faults
KVM: arm64: Fix PAR_EL1.{PTW,S} reporting on AT S1E*
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/fgt-masks: (43 commits)
: .
: Large rework of the way KVM deals with trap bits in conjunction with
: the CPU feature registers. It now draws a direct link between which
: the feature set, the system registers that need to UNDEF to match
: the configuration and bits that need to behave as RES0 or RES1 in
: the trap registers that are visible to the guest.
:
: Best of all, these definitions are mostly automatically generated
: from the JSON description published by ARM under a permissive
: license.
: .
KVM: arm64: Handle TSB CSYNC traps
KVM: arm64: Add FGT descriptors for FEAT_FGT2
KVM: arm64: Allow sysreg ranges for FGT descriptors
KVM: arm64: Add context-switch for FEAT_FGT2 registers
KVM: arm64: Add trap routing for FEAT_FGT2 registers
KVM: arm64: Add sanitisation for FEAT_FGT2 registers
KVM: arm64: Add FEAT_FGT2 registers to the VNCR page
KVM: arm64: Use HCR_EL2 feature map to drive fixed-value bits
KVM: arm64: Use HCRX_EL2 feature map to drive fixed-value bits
KVM: arm64: Allow kvm_has_feat() to take variable arguments
KVM: arm64: Use FGT feature maps to drive RES0 bits
KVM: arm64: Validate FGT register descriptions against RES0 masks
KVM: arm64: Switch to table-driven FGU configuration
KVM: arm64: Handle PSB CSYNC traps
KVM: arm64: Use KVM-specific HCRX_EL2 RES0 mask
KVM: arm64: Remove hand-crafted masks for FGT registers
KVM: arm64: Use computed FGT masks to setup FGT registers
KVM: arm64: Propagate FGT masks to the nVHE hypervisor
KVM: arm64: Unconditionally configure fine-grain traps
KVM: arm64: Use computed masks as sanitisers for FGT registers
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/mte-frac:
: .
: Prevent FEAT_MTE_ASYNC from being accidently exposed to a guest,
: courtesy of Ben Horgan. From the cover letter:
:
: "The ID_AA64PFR1_EL1.MTE_frac field is currently hidden from KVM.
: However, when ID_AA64PFR1_EL1.MTE==2, ID_AA64PFR1_EL1.MTE_frac==0
: indicates that MTE_ASYNC is supported. On a host with
: ID_AA64PFR1_EL1.MTE==2 but without MTE_ASYNC support a guest with the
: MTE capability enabled will incorrectly see MTE_ASYNC advertised as
: supported. This series fixes that."
: .
KVM: selftests: Confirm exposing MTE_frac does not break migration
KVM: arm64: Make MTE_frac masking conditional on MTE capability
arm64/sysreg: Expose MTE_frac so that it is visible to KVM
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/ubsan-el2:
: .
: Add UBSAN support to the EL2 portion of KVM, reusing most of the
: existing logic provided by CONFIG_IBSAN_TRAP.
:
: Patches courtesy of Mostafa Saleh.
: .
KVM: arm64: Handle UBSAN faults
KVM: arm64: Introduce CONFIG_UBSAN_KVM_EL2
ubsan: Remove regs from report_ubsan_failure()
arm64: Introduce esr_is_ubsan_brk()
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/pkvm-np-thp-6.16: (21 commits)
: .
: Large mapping support for non-protected pKVM guests, courtesy of
: Vincent Donnefort. From the cover letter:
:
: "This series adds support for stage-2 huge mappings (PMD_SIZE) to pKVM
: np-guests, that is installing PMD-level mappings in the stage-2,
: whenever the stage-1 is backed by either Hugetlbfs or THPs."
: .
KVM: arm64: np-guest CMOs with PMD_SIZE fixmap
KVM: arm64: Stage-2 huge mappings for np-guests
KVM: arm64: Add a range to pkvm_mappings
KVM: arm64: Convert pkvm_mappings to interval tree
KVM: arm64: Add a range to __pkvm_host_test_clear_young_guest()
KVM: arm64: Add a range to __pkvm_host_wrprotect_guest()
KVM: arm64: Add a range to __pkvm_host_unshare_guest()
KVM: arm64: Add a range to __pkvm_host_share_guest()
KVM: arm64: Introduce for_each_hyp_page
KVM: arm64: Handle huge mappings for np-guest CMOs
KVM: arm64: Extend pKVM selftest for np-guests
KVM: arm64: Selftest for pKVM transitions
KVM: arm64: Don't WARN from __pkvm_host_share_guest()
KVM: arm64: Add .hyp.data section
KVM: arm64: Unconditionally cross check hyp state
KVM: arm64: Defer EL2 stage-1 mapping on share
KVM: arm64: Move hyp state to hyp_vmemmap
KVM: arm64: Introduce {get,set}_host_state() helpers
KVM: arm64: Use 0b11 for encoding PKVM_NOPAGE
KVM: arm64: Fix pKVM page-tracking comments
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
dm_op hypercalls might come from userspace and pass memory addresses as
parameters. The memory addresses typically correspond to buffers
allocated in userspace to hold extra hypercall parameters.
On ARM, when CONFIG_ARM64_SW_TTBR0_PAN is enabled, they might not be
accessible by Xen, as a result ioreq hypercalls might fail. See the
existing comment in arch/arm64/xen/hypercall.S regarding privcmd_call
for reference.
For privcmd_call, Linux calls uaccess_ttbr0_enable before issuing the
hypercall thanks to commit 9cf09d68b89a. We need to do the same for
dm_op. This resolves the problem.
Cc: stable@kernel.org
Fixes: 9cf09d68b89a ("arm64: xen: Enable user access before a privcmd hvc call")
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <alpine.DEB.2.22.394.2505121446370.8380@ubuntu-linux-20-04-desktop>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/defconfig
Enable Rockchip SAI and ES8328 modules.
* tag 'v6.16-rockchip-defconfig64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: defconfig: Enable Rockchip SAI and ES8328
Link: https://lore.kernel.org/r/4060740.R56niFO833@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/defconfig
MediaTek ARM64 defconfig updates for v6.16
This enables some drivers as modules to enable fully booting
some of the supported MediaTek boards;
In particular, this enables the following drivers as module:
- PHYs for PCIe, HDMI, DSI and DisplayPort for all boards
- MediaTek UART DMA Controller, also for all boards
- MDP3 driver for MT8186/88/95 (Chromebooks and Genio variants)
- Auxiliary ADC for the MT6357/58/59 PMICs found on both Genio EVK
and Chromebooks based on designs with MT8183/86/88/92/95 SoCs
- iTE IT5205 Type-C USB Alternate Mode Passive MUX, found
on both Chromebooks and Genio EVKs with MT8188/95
- Richtek RT1715 Type-C PD Controller, found on all Genio boards
- Himax HX8279 DSI panel DriverIC and KD070FHFID015 panel, found
on various revisions of the Genio Evaluation Kit boards.
* tag 'mtk-defconfig-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
arm64: defconfig: Enable configs for MediaTek Genio EVK boards
arm64: defconfig: mediatek: enable PHY drivers
Link: https://lore.kernel.org/r/20250520114356.1194450-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig
One more Qualcomm Arm64 defconfig update for v6.16
Enable global clock controller and TLMM pinctrl drivers for IPQ5424 to
make this boot.
* tag 'qcom-arm64-defconfig-for-6.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable IPQ5424 RDP466 base configs
Link: https://lore.kernel.org/r/20250520025119.40021-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/dt
Armv8 Juno/FVP updates for v6.16
Few updates to the Arm FVP(Fixed Virtual Platform) device tree, enhancing
support for system tracing, power management, and firmware coexistence:
1. ETE and TRBE support
Adds CoreSight ETE and TRBE nodes for the FVP Rev C model. These are
disabled by default as they need to be enabled explicitly via model
parameters.
2. CPU idle states and system timer for idle broadcast
Introduces CPU idle state definitions but disabled by default due to
potential performance impact on the model. Also adds a system-level
broadcast timer for use when CPUs enter deep idle states where local
timers stop.
3. Firmware memory reservation
Reserves 64MB at the end of the first DRAM bank to prevent conflicts
with FF-A firmware or similar configurations that rely on this region.
4. Drop the unnecessary clock-frequency property in the timer nodes
The boot/secure firmware must configure the timer clock frequency and
the non-secure OS must be able to read the same. The clock-frequency is
generally used when the firmware is broken which is not the case on
most of the fast models and Juno platform.
As noted above some of the changes are disabled by default where applicable
to ensure backward compatibility and avoid unintended performance impact
on platforms using default model parameters.
* tag 'juno-updates-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: fvp: Add ETE and TRBE nodes for Rev C model
arm64: dts: arm: Drop the clock-frequency property from timer nodes
arm64: dts: fvp: Reserve 64MB for the FF-A firmware in memory map
arm64: dts: fvp: Add CPU idle states for Rev C model
arm64: dts: fvp: Add system timer for broadcast during CPU idle
Link: https://lore.kernel.org/r/20250513143827.3606686-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add MIDR encoding for HiSilicon HIP12 which is used on HiSilicon
HIP12 SoCs.
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20250425033845.57671-2-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Commit 5b39db6037e7 ("arm64: el2_setup.h: Rename some labels to be more
diff-friendly") reworked the labels in __init_el2_fgt to say what's
skipped rather than what the target location is. The exception was
"set_fgt_" which is where registers are written. In reviewing the BRBE
additions, Will suggested "set_debug_fgt_" where HDFGxTR_EL2 are
written. Doing that would partially revert commit 5b39db6037e7 undoing
the goal of minimizing additions here, but it would follow the
convention for labels where registers are written.
So let's do both. Branches that skip something go to a "skip" label and
places that set registers have a "set" label. This results in some
double labels, but it makes things entirely consistent.
While we're here, the SME skip label was incorrectly named, so fix it.
Reported-by: Will Deacon <will@kernel.org>
Cc: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250520-arm-brbe-v19-v22-2-c1ddde38e7f8@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
As reported by the build robot, the documentation for vgic_its_iter_next()
contains a typo. Fix it.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505221421.KAuWlmSr-lkp@intel.com/
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
More Qualcomm Arm64 DeviceTree updates for v6.16
Support for CPU frequency scaling is enabled on the X Elite platform.
Also on X Elite, support for the HP EliteBook Ultra G1q is introduced.
Support for the QCS6490 RB3gen2 Industrial Mezzanine is also added.
PCIe controllers and PHYs are described and enabled across IPQ5018,
IPQ5332, and IPQ5424. On IPQ9474 the missing MHI register range is
added. The TCSR block is described and used to enable download mode
flags on IPQ5018.
The venus video encoder/decoder is enabled on the MSM8998-based Lenovo
Miix 630 laptop.
The crypto engine is enabled on QCM2290 and QCS615. Bluetooth is enabled
on the QCM2210-based RB1 board.
The Fairphone FP5 gains Displayport sound support.
SAR2130P display nodes are added.
On 8cx Gen3 the sensor remoteproc (SLPI) is introduced and this is
enabled on Lenovo Thinkpad X13s and the CRD.
The SDM845-based Samsung Galaxy S9 gains graphics, modem and initial
sound support.
On SDX75 the QPIC BAM and NAND support is added, and these are enabled
on the IDP board.
LLCC is added for SM8750. SM8550 gains Iris video decoder support.
For X Elite, Lenovo ThinkPad T14s support for the SDX62 modem, as well
as audio headset, is added. ASUS Vivobook S 15 gains Bluetooth support,
Microsoft Surface Laptop 7 models gets support for DP over USB Type-C,
HP Omnibook X 14 gains audio support. The devkit gets the USB multiport
controller and the two USB Type-A ports described.
Additionally a variety of Devicetree fixes are introduced, primarily
identified through binding validation.
* tag 'qcom-arm64-for-6.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (58 commits)
arm64: dts: qcom: sm4450: Add RPMh power domains support
arm64: dts: qcom: x1e80100-lenovo-yoga-slim7x: add retimers, dp altmode support
arm64: dts: qcom: ipq5424: Enable PCIe PHYs and controllers
arm64: dts: qcom: ipq5424: Add PCIe PHYs and controller nodes
arm64: dts: qcom: sc7280: Mark FastRPC context banks as dma-coherent
arm64: dts: qcom: sdx75-idp: Enable QPIC BAM & QPIC NAND support
arm64: dts: qcom: sdx75: Add QPIC NAND support
arm64: dts: qcom: sdx75: Add QPIC BAM support
arm64: dts: qcom: qcm2290: Add crypto engine
arm64: dts: qcom: x1e80100-vivobook-s15: Add bluetooth
arm64: dts: qcom: x1e80100: Add PCIe lane equalization preset properties
arm64: dts: qcom: qcs615: Fix up UFS clocks
arm64: dts: qcom: sa8775p: Clean up the PSCI PDs
arm64: dts: qcom: msm8996-oneplus: Add SLPI VDD_PX
arm64: dts: qcom: sm6350-pdx213: Wire up USB regulators
arm64: dts: qcom: msm8998-yoshino: Add QUSB2PHY VDD supply
arm64: dts: qcom: msm8998-mtp: Add QUSB2PHY VDD supply
arm64: dts: qcom: msm8998-fxtec: Add QUSB2PHY VDD supply
arm64: dts: qcom: qcs615: Remove disallowed property from AOSS_QMP node
arm64: dts: qcom: msm8998: Remove mdss_hdmi_phy phandle argument
...
Link: https://lore.kernel.org/r/20250520024248.38904-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
Additional MediaTek ARM64 DTS updates for v6.16
This addresses devicetree binding warnings happening on the
MDP3 nodes in mt8188 dts, reverts the commit adding the SCP
firmware-name as strongly suggested by Arnd, and also adds
some more late commits.
In particular:
- MT6359 PMIC
- Renamed PMIC RTC node to fix dtbs_check warning
- MT7988(A)
- Support for SPI controllers was added to SoC and BPI-R4
- Support for XSPHY, USB and PCIe2 was added as well
- Fan and cooling maps were added to BPI-R4 machine
- Added BananaPi R4 2G5 machine variant
- MT8365
- Added touchscreen support to MT8365 Genio EVK
- MT8188
- Addressed dtbs_check warnings for MDP3 nodes
- MT8390 (Genio)
- Reverted SCP firmware-name addition
* tag 'mtk-dts64-for-v6.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (42 commits)
Revert "arm64: dts: mediatek: mt8390-genio-common: Add firmware-name for scp0"
arm64: dts: mediatek: mt8188: Address binding warnings for MDP3 nodes
arm64: dts: mt6359: Rename RTC node to match binding expectations
arm64: dts: mt8365-evk: Add goodix touchscreen support
arm64: dts: mediatek: mt8188: Add missing #reset-cells property
arm64: dts: airoha: en7581: Add PCIe nodes to EN7581 SoC evaluation board
arm64: dts: airoha: en7581: Add gpio-ranges property for gpio controller
arm64: dts: mediatek: mt7988a-bpi-r4: configure spi-nodes
arm64: dts: mediatek: mt7988a-bpi-r4: Add fan and coolingmaps
arm64: dts: mediatek: mt7988: add phy calibration efuse subnodes
arm64: dts: mediatek: mt7988: move uart0 and spi1 pins to soc dtsi
arm64: dts: mediatek: mt7988: add spi controllers
arm64: dts: mediatek: mt7988a-bpi-r4: enable xsphy
arm64: dts: mediatek: mt7988: Add xsphy for ssusb0/pcie2
arm64: dts: mediatek: mt7988a-bpi-r4: allow hw variants of bpi-r4
dt-bindings: arm: mediatek: add bpi-r4 2g5 phy variant
arm64: dts: mt6359: Add missing 'compatible' property to regulators node
arm/arm64: dts: mediatek: Add missing "#sound-dai-cells" to linux,bt-sco
arm64: dts: mediatek: mt8390-genio-common: Set ssusb2 default dual role mode to host
arm64: dts: mediatek: mt8395-genio-1200-evk: Disable unused backlight
...
Link: https://lore.kernel.org/r/20250520114356.1194450-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
Power-domains needed for stability, dropping of unnecessary assigned-clocks
(handled by cpufreq) and fixes for dtc W=1 warnings.
* tag 'v6.16-rockchip-dts64-3' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: move rk3562 pinctrl node outside the soc node
arm64: dts: rockchip: fix rk3562 pcie unit addresses
arm64: dts: rockchip: move rk3528 pinctrl node outside the soc node
arm64: dts: rockchip: remove a double-empty line from rk3576 core dtsi
arm64: dts: rockchip: move rk3576 pinctrl node outside the soc node
arm64: dts: rockchip: fix rk3576 pcie unit addresses
arm64: dts: rockchip: Drop assigned-clock* from cpu nodes on rk3588
arm64: dts: rockchip: Add missing SFC power-domains to rk3576
Link: https://lore.kernel.org/r/4798229.ejJDZkT8p0@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New SoC the RK3562 (4xA53, Mali-G52) with one evaluation board.
New boards:
- Cobra and PP1516 from Theobroma-Systems (build around the PX30)
- Radxa Rock 5B+ (rk3588)
- Rockchip RK3399 industrial eval board
New peripherals:
- GMAC + SDMMC/SDIO on rk3528
- SAI + HDMI-audio on rk3576
Interesting general updates:
- move rk3528 i2c + uart aliases as requested
- rk3568 PCIe3 MSI to use GIC ITS
- update deprecated dwmac reset properties on some px30 boards
- updates for cypress usb hubs on some Theobroma boards
Binding taken with Greg's blessing
https://lore.kernel.org/all/2025051550-polish-prude-ed56@gregkh/
* tag 'v6.16-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (35 commits)
arm64: dts: rockchip: Improve LED config for NanoPi R5S
arm64: dts: rockchip: add px30-pp1516 base dtsi and board variants
dt-bindings: arm: rockchip: add PX30-PP1516 boards from Theobroma Systems
arm64: dts: rockchip: add px30-cobra base dtsi and board variants
dt-bindings: arm: rockchip: add PX30-Cobra boards from Theobroma Systems
arm64: dts: rockchip: move reset to dedicated eth-phy node on ringneck
arm64: dts: rockchip: add basic mdio node to px30
arm64: dts: rockchip: disable unrouted USB controllers and PHY on RK3399 Puma with Haikou
arm64: dts: rockchip: disable unrouted USB controllers and PHY on RK3399 Puma
arm64: dts: rockchip: fix internal USB hub instability on RK3399 Puma
dt-bindings: usb: cypress,hx3: Add support for all variants
arm64: dts: rockchip: move rk3528 i2c+uart aliases to board files
arm64: dts: rockchip: drop wrong spdif clock from edp1 on rk3588
arm64: dts: rockchip: Add RK3562 evb2 devicetree
arm64: dts: rockchip: add core dtsi for RK3562 SoC
dt-bindings: arm: rockchip: Add rk3562 evb2 board
dt-bindings: soc: rockchip: Add rk3562 syscon compatibles
dt-bindings: rockchip: pmu: Add rk3562 compatible
arm64: dts: rockchip: Enable Ethernet controller on Radxa E20C
arm64: dts: rockchip: Add GMAC nodes for RK3528
...
Link: https://lore.kernel.org/r/3998939.iIbC2pHGDl@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt
mvebu dt64 for 6.16 (part 1)
Clean up unused pinctrl-names in pca9555 nodes
* tag 'mvebu-dt64-6.16-1' of https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: marvell: Drop unused "pinctrl-names"
Link: https://lore.kernel.org/r/87tt5kpqy9.fsf@BLaptop.bootlin.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.16 (take four)
- Fix White Hawk ARD Audio breakage.
* tag 'renesas-dts-for-v6.16-tag4' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: white-hawk-ard-audio: Fix TPU0 groups
Link: https://lore.kernel.org/r/cover.1747817851.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.16 (take three)
- Silence a DTC warning,
- Add an extra compatible value to avoid future issues.
* tag 'renesas-dts-for-v6.16-tag3' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
riscv: dts: renesas: Add specific RZ/Five cache compatible
arm64: dts: renesas: sparrow-hawk: Disable dtc spi_bus_bridge check
Link: https://lore.kernel.org/r/cover.1747399860.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
Microchip ARM64 device tree updates for v6.16
This update includes:
- fix CPU node "enable-method" property dependencies
* tag 'microchip-dt64-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
arm64: dts: microchip: sparx5: Fix CPU node "enable-method" property dependencies
Link: https://lore.kernel.org/r/20250516055607.11248-1-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
