summaryrefslogtreecommitdiff
path: root/arch/arm64/boot
AgeCommit message (Collapse)Author
2019-12-05Merge mainline/master into arm/fixesOlof Johansson
This brings in the mainline tree right after armsoc contents was merged this release cycle, so that we can re-run savedefconfig, etc. Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-05Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM Device-tree updates from Olof Johansson: "As always, the bulk of updates. Some of the news this cycle: New SoC descriptions: - Broadcom BCM2711 - Amlogic Meson A1 and G12 - Freescale S32V234 - Marvell Armada AP807/AP807-quad and CP115 - Realtek RTD1293 and RTD1296 - Rockchip RK3308 New boards and platforms: - Allwinner: NanoPi Duo2 - Amlogic: Ugoos am6 - Atmel at91: Overkiz Kizbox2/4 - Broadcom: RPi4, Luxul XWC-2000 - Marvell: New Espressobin flavor - NXP: i.MX8MN LPDDR4 EVK, i.MX8QXP Colibri, S32V234 EVB, Netronix E60K02 and Kobo Clara HD, Kontron N6311 and N6411, OPOS6UL and OPOS6ULDev - Renesas: Salvator-XS - Rockchip: Beelink A1 (rk3308), rk3308 eval boards, rk3399-roc-pc" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (653 commits) ARM: dts: logicpd-torpedo: Disable USB Host arm: dts: mt6323: add keys, power-controller, rtc and codec arm64: dts: mt8183: add systimer0 device node dt-bindings: mediatek: update bindings for MT8183 systimer arm64: dts: rockchip: fix sdmmc detection on boot on rk3328-roc-cc arm64: dts: rockchip: Split rk3399-roc-pc for with and without mezzanine board. arm64: dts: rockchip: Add Beelink A1 dt-bindings: ARM: rockchip: Add Beelink A1 arm64: dts: rockchip: Add RK3328 audio pipelines arm64: dts: ti: k3-j721e-common-proc-board: Add USB ports arm64: dts: ti: k3-j721e-main: add USB controller nodes ARM: dts: aspeed-g6: Add timer description ARM: dts: aspeed: ast2600evb: Enable i2c buses ARM: dts: at91: add a dts and dtsi file for kizbox2 based boards dt-bindings: arm: at91: Document Kizbox2-2 board binding arm64: dts: meson-gx: fix i2c compatible arm64: dts: meson-gx: cec node should be disabled by default arm64: dts: meson-g12b-odroid-n2: add missing amlogic, s922x compatible arm64: dts: meson-gxm: fix gpu irq order arm64: dts: meson-g12a: fix gpu irq order ...
2019-12-05Merge tag 'juno-fixes-5.5' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes ARMv8 Juno fixes for v5.5 Couple of fixes: 1. Fix for UART clock frequency on all Juno variants that exist since the platform was added. This is mainly due to incorrect Juno SoC TRM that was referred during initial development days 2. Drop "dma-ranges" property for now as they are triggering loads of warning on boot * tag 'juno-fixes-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: Revert "arm64: dts: juno: add dma-ranges property" arm64: dts: juno: Fix UART frequency arm64: dts: juno: add GPU subsystem Link: https://lore.kernel.org/r/20191202114338.GA20965@bogus Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-03Merge tag 'pci-v5.5-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Warn if a host bridge has no NUMA info (Yunsheng Lin) - Add PCI_STD_NUM_BARS for the number of standard BARs (Denis Efremov) Resource management: - Fix boot-time Embedded Controller GPE storm caused by incorrect resource assignment after ACPI Bus Check Notification (Mika Westerberg) - Protect pci_reassign_bridge_resources() against concurrent addition/removal (Benjamin Herrenschmidt) - Fix bridge dma_ranges resource list cleanup (Rob Herring) - Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control the MMIO and prefetchable MMIO window sizes of hotplug bridges independently (Nicholas Johnson) - Fix MMIO/MMIO_PREF window assignment that assigned more space than desired (Nicholas Johnson) - Only enforce bus numbers from bridge EA if the bridge has EA devices downstream (Subbaraya Sundeep) - Consolidate DT "dma-ranges" parsing and convert all host drivers to use shared parsing (Rob Herring) Error reporting: - Restore AER capability after resume (Mayurkumar Patel) - Add PoisonTLPBlocked AER counter (Rajat Jain) - Use for_each_set_bit() to simplify AER code (Andy Shevchenko) - Fix AER kernel-doc (Andy Shevchenko) - Add "pcie_ports=dpc-native" parameter to allow native use of DPC even if platform didn't grant control over AER (Olof Johansson) Hotplug: - Avoid returning prematurely from sysfs requests to enable or disable a PCIe hotplug slot (Lukas Wunner) - Don't disable interrupts twice when suspending hotplug ports (Mika Westerberg) - Fix deadlocks when PCIe ports are hot-removed while suspended (Mika Westerberg) Power management: - Remove unnecessary ASPM locking (Bjorn Helgaas) - Add support for disabling L1 PM Substates (Heiner Kallweit) - Allow re-enabling Clock PM after it has been disabled (Heiner Kallweit) - Add sysfs attributes for controlling ASPM link states (Heiner Kallweit) - Remove CONFIG_PCIEASPM_DEBUG, including "link_state" and "clk_ctl" sysfs files (Heiner Kallweit) - Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on USB 2.0 or 1.1 connect events (Kai-Heng Feng) - Move power state check out of pci_msi_supported() (Bjorn Helgaas) - Fix incorrect MSI-X masking on resume and revert related nvme quirk for Kingston NVME SSD running FW E8FK11.T (Jian-Hong Pan) - Always return devices to D0 when thawing to fix hibernation with drivers like mlx4 that used legacy power management (previously we only did it for drivers with new power management ops) (Dexuan Cui) - Clear PCIe PME Status even for legacy power management (Bjorn Helgaas) - Fix PCI PM documentation errors (Bjorn Helgaas) - Use dev_printk() for more power management messages (Bjorn Helgaas) - Apply D2 delay as milliseconds, not microseconds (Bjorn Helgaas) - Convert xen-platform from legacy to generic power management (Bjorn Helgaas) - Removed unused .resume_early() and .suspend_late() legacy power management hooks (Bjorn Helgaas) - Rearrange power management code for clarity (Rafael J. Wysocki) - Decode power states more clearly ("4" or "D4" really refers to "D3cold") (Bjorn Helgaas) - Notice when reading PM Control register returns an error (~0) instead of interpreting it as being in D3hot (Bjorn Helgaas) - Add missing link delays required by the PCIe spec (Mika Westerberg) Virtualization: - Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn Helgaas) - Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Allow VFs to use PASID (the PF PASID capability is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Disconnect PF and VF ATS enablement, since ATS in PFs and associated VFs can be enabled independently (Kuppuswamy Sathyanarayanan) - Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan) - Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas) - Consolidate ATS declarations in linux/pci-ats.h (Krzysztof Wilczynski) - Remove unused PRI and PASID stubs (Bjorn Helgaas) - Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID interfaces that are only used by built-in IOMMU drivers (Bjorn Helgaas) - Hide PRI and PASID state restoration functions used only inside the PCI core (Bjorn Helgaas) - Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski) - Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut) - Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George Cherian) - Fix the UPDCR register address in the Intel ACS quirk (Steffen Liebergeld) - Unify ACS quirk implementations (Bjorn Helgaas) Amlogic Meson host bridge driver: - Fix meson PERST# GPIO polarity problem (Remi Pommarel) - Add DT bindings for Amlogic Meson G12A (Neil Armstrong) - Fix meson clock names to match DT bindings (Neil Armstrong) - Add meson support for Amlogic G12A SoC with separate shared PHY (Neil Armstrong) - Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe combo PHY (Neil Armstrong) - Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong) - Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT (Neil Armstrong) Broadcom iProc host bridge driver: - Invalidate iProc PAXB address mapping before programming it (Abhishek Shah) - Fix iproc-msi and mvebu __iomem annotations (Ben Dooks) Cadence host bridge driver: - Refactor Cadence PCIe host controller to use as a library for both host and endpoint (Tom Joseph) Freescale Layerscape host bridge driver: - Add layerscape LS1028a support (Xiaowei Bao) Intel VMD host bridge driver: - Add VMD bus 224-255 restriction decode (Jon Derrick) - Add VMD 8086:9A0B device ID (Jon Derrick) - Remove Keith from VMD maintainer list (Keith Busch) Marvell ARMADA 3700 / Aardvark host bridge driver: - Use LTSSM state to build link training flag since Aardvark doesn't implement the Link Training bit (Remi Pommarel) - Delay before training Aardvark link in case PERST# was asserted before the driver probe (Remi Pommarel) - Fix Aardvark issues with Root Control reads and writes (Remi Pommarel) - Don't rely on jiffies in Aardvark config access path since interrupts may be disabled (Remi Pommarel) - Fix Aardvark big-endian support (Grzegorz Jaszczyk) Marvell ARMADA 370 / XP host bridge driver: - Make mvebu_pci_bridge_emul_ops static (Ben Dooks) Microsoft Hyper-V host bridge driver: - Add hibernation support for Hyper-V virtual PCI devices (Dexuan Cui) - Track Hyper-V pci_protocol_version per-hbus, not globally (Dexuan Cui) - Avoid kmemleak false positive on hv hbus buffer (Dexuan Cui) Mobiveil host bridge driver: - Change mobiveil csr_read()/write() function names that conflict with riscv arch functions (Kefeng Wang) NVIDIA Tegra host bridge driver: - Fix Tegra CLKREQ dependency programming (Vidya Sagar) Renesas R-Car host bridge driver: - Remove unnecessary header include from rcar (Andrew Murray) - Tighten register index checking for rcar inbound range programming (Marek Vasut) - Fix rcar inbound range alignment calculation to improve packing of multiple entries (Marek Vasut) - Update rcar MACCTLR setting to match documentation (Yoshihiro Shimoda) - Clear bit 0 of MACCTLR before PCIETCTLR.CFINIT per manual (Yoshihiro Shimoda) - Add Marek Vasut and Yoshihiro Shimoda as R-Car maintainers (Simon Horman) Rockchip host bridge driver: - Make rockchip 0V9 and 1V8 power regulators non-optional (Robin Murphy) Socionext UniPhier host bridge driver: - Set uniphier to host (RC) mode always (Kunihiko Hayashi) Endpoint drivers: - Fix endpoint driver sign extension problem when shifting page number to phys_addr_t (Alan Mikhak) Misc: - Add NumaChip SPDX header (Krzysztof Wilczynski) - Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski) - Remove unused includes (Krzysztof Wilczynski) - Removed unused sysfs attribute groups (Ben Dooks) - Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas) - Add PCIe Link Control 2 register field definitions to replace magic numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas) - Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas) - Use pcie_capability_read_word() instead of pci_read_config_word() in AMDGPU and Radeon CIK/SI (Frederick Lawler) - Remove unused pci_irq_get_node() Greg Kroah-Hartman) - Make asm/msi.h mandatory and simplify PCI_MSI_IRQ_DOMAIN Kconfig (Palmer Dabbelt, Michal Simek) - Read all 64 bits of Switchtec part_event_bitmap (Logan Gunthorpe) - Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn Helgaas) - Fix bridge emulation big-endian support (Grzegorz Jaszczyk) - Fix dwc find_next_bit() usage (Niklas Cassel) - Fix pcitest.c fd leak (Hewenliang) - Fix typos and comments (Bjorn Helgaas) - Fix Kconfig whitespace errors (Krzysztof Kozlowski)" * tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (160 commits) PCI: Remove PCI_MSI_IRQ_DOMAIN architecture whitelist asm-generic: Make msi.h a mandatory include/asm header Revert "nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T" PCI/MSI: Fix incorrect MSI-X masking on resume PCI/MSI: Move power state check out of pci_msi_supported() PCI/MSI: Remove unused pci_irq_get_node() PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer PCI: hv: Change pci_protocol_version to per-hbus PCI: hv: Add hibernation support PCI: hv: Reorganize the code in preparation of hibernation MAINTAINERS: Remove Keith from VMD maintainer PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related code PCI/ASPM: Add sysfs attributes for controlling ASPM link states PCI: Fix indentation drm/radeon: Prefer pcie_capability_read_word() drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions drm/radeon: Correct Transmit Margin masks drm/amdgpu: Prefer pcie_capability_read_word() PCI: uniphier: Set mode register to host mode drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions ...
2019-11-28Revert "arm64: dts: juno: add dma-ranges property"Sudeep Holla
This reverts commit 193d00a2b35ee3353813b4006a18131122087205. Commit 951d48855d86 ("of: Make of_dma_get_range() work on bus nodes") reworked the logic such that of_dma_get_range() works correctly starting from a bus node containing "dma-ranges". Since on Juno we don't have a SoC level bus node and "dma-ranges" is present only in the root node, we get the following error: OF: translation of DMA address(0) to CPU address failed node(/sram@2e000000) OF: translation of DMA address(0) to CPU address failed node(/uart@7ff80000) ... OF: translation of DMA address(0) to CPU address failed node(/mhu@2b1f0000) OF: translation of DMA address(0) to CPU address failed node(/iommu@2b600000) OF: translation of DMA address(0) to CPU address failed node(/iommu@2b600000) OF: translation of DMA address(0) to CPU address failed node(/iommu@2b600000) So let's fix it by dropping the "dma-ranges" property for now. This should be fine since it doesn't represent any kind of device-visible restriction; it was only there for completeness, and we've since given in to the assumption that missing "dma-ranges" implies a 1:1 mapping anyway. We can add it later with a proper SoC bus node and moving all the devices that belong there along with the "dma-ranges" if required. Fixes: 193d00a2b35e ("arm64: dts: juno: add dma-ranges property") Cc: Rob Herring <robh+dt@kernel.org> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2019-11-28Merge branch 'remotes/lorenzo/pci/meson'Bjorn Helgaas
- Fix meson PERST# GPIO polarity problem (Remi Pommarel) - Add DT bindings for Amlogic Meson G12A (Neil Armstrong) - Fix meson clock names to match DT bindings (Neil Armstrong) - Add meson support for Amlogic G12A SoC with separate shared PHY (Neil Armstrong) - Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe combo PHY (Neil Armstrong) - Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong) - Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT (Neil Armstrong) * remotes/lorenzo/pci/meson: arm64: dts: khadas-vim3: add commented support for PCIe arm64: dts: meson-g12a: Add PCIe node phy: meson-g12a-usb3-pcie: Add support for PCIe mode PCI: amlogic: meson: Add support for G12A PCI: amlogic: Fix probed clock names dt-bindings: pci: amlogic, meson-pcie: Add G12A bindings PCI: amlogic: Fix reset assertion via gpio descriptor
2019-11-26Merge tag 'media/v5.5-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - uAPI documentation for stateless decoders - Added a new CEC ioctl together with its documentation - Improved IPU3 documentation - New i2c drivers: hi556 and imx290 - Added support on Vivid driver for meta streams - Added de-interlace support for sunxi subdriver - Added a few new remote controler keymaps - Added H.265 support for Sunxi Cedrus driver - Another round of random driver cleanups, fixes and improvements * tag 'media/v5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (361 commits) media: Revert "media: mtk-vcodec: Remove extra area allocation in an input buffer on encoding" media: hantro: Set H264 FIELDPIC_FLAG_E flag correctly media: hantro: Remove now unused H264 pic_size media: hantro: Use output buffer width and height for H264 decoding media: hantro: Reduce H264 extra space for motion vectors media: hantro: Fix H264 motion vector buffer offset media: ti-vpe: vpe: fix compatible to match bindings media: dt-bindings: media: ti-vpe: Document VPE driver media: zr364xx: remove redundant assigmnent to idx, clean up code media: Documentation: media: *_DEFAULT targets for subdevs media: hantro: Fix s_fmt for dynamic resolution changes media: i2c: Use the correct style for SPDX License Identifier media: siano: Use the correct style for SPDX License Identifier media: vicodec: media_device_cleanup was called too early media: vim2m: media_device_cleanup was called too early media: cedrus: Increase maximum supported size media: cedrus: Fix H264 4k support media: cedrus: Properly signal size in mode register media: v4l2-ctrl: Lock main_hdl on operations of requests_queued. media: si470x-i2c: add missed operations in remove ...
2019-11-25arm64: dts: juno: Fix UART frequencyAndre Przywara
Older versions of the Juno *SoC* TRM [1] recommended that the UART clock source should be 7.2738 MHz, whereas the *system* TRM [2] stated a more correct value of 7.3728 MHz. Somehow the wrong value managed to end up in our DT. Doing a prime factorisation, a modulo divide by 115200 and trying to buy a 7.2738 MHz crystal at your favourite electronics dealer suggest that the old value was actually a typo. The actual UART clock is driven by a PLL, configured via a parameter in some board.txt file in the firmware, which reads 7.37 MHz (sic!). Fix this to correct the baud rate divisor calculation on the Juno board. [1] http://infocenter.arm.com/help/topic/com.arm.doc.ddi0515b.b/DDI0515B_b_juno_arm_development_platform_soc_trm.pdf [2] http://infocenter.arm.com/help/topic/com.arm.doc.100113_0000_07_en/arm_versatile_express_juno_development_platform_(v2m_juno)_technical_reference_manual_100113_0000_07_en.pdf Fixes: 71f867ec130e ("arm64: Add Juno board device tree.") Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2019-11-16Merge tag 'tee-fixes-for-v5.4' of ↵Olof Johansson
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes Two OP-TE driver fixes: - Add proper cleanup on optee_enumerate_devices() failure - Make sure to register kernel allocations of dynamic shared memory * tag 'tee-fixes-for-v5.4' of git://git.linaro.org/people/jens.wiklander/linux-tee: (591 commits) tee: optee: fix device enumeration error handling tee: optee: Fix dynamic shm pool allocations Linux 5.4-rc3 tracing: Initialize iter->seq after zeroing in tracing_read_pipe() tracing/hwlat: Don't ignore outer-loop duration when calculating max_latency tracing/hwlat: Report total time spent in all NMIs during the sample recordmcount: Fix nop_mcount() function tracing: Do not create tracefs files if tracefs lockdown is in effect tracing: Add locked_down checks to the open calls of files created for tracefs tracing: Add tracing_check_open_get_tr() tracing: Have trace events system open call tracing_open_generic_tr() tracing: Get trace_array reference for available_tracers files ftrace: Get a reference counter for the trace_array on filter files tracefs: Revert ccbd54ff54e8 ("tracefs: Restrict tracefs when the kernel is locked down") perf/x86/cstate: Add Tiger Lake CPU support perf/x86/msr: Add Tiger Lake CPU support perf/x86/intel: Add Tiger Lake CPU support perf/x86/cstate: Update C-state counters for Ice Lake perf/x86/msr: Add new CPU model numbers for Ice Lake perf/x86/cstate: Add Comet Lake CPU support ... Link: https://lore.kernel.org/r/20191115105353.GA26176@jax Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-11Merge tag 'v5.4-next-dts64' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt mt8183: add systimer node and bindings * tag 'v5.4-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm64: dts: mt8183: add systimer0 device node dt-bindings: mediatek: update bindings for MT8183 systimer Link: https://lore.kernel.org/r/4d3984bd-4bb3-b8c4-6e02-19a7185cd682@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-10Merge tag 'amlogic-dt64' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: Amlogic updates for v5.5 Hightlights - new board; ugoos am6, based on G12B SoC - g12: add thermal driver and cooling properties - sm1: enable audio on SEI610 board - IR: add several keymaps - sdio: add keep-power-in-suspend property for multiple boards - pcie: add support for G12A - multiple fixes, cleanups * tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (62 commits) arm64: dts: meson-gx: fix i2c compatible arm64: dts: meson-gx: cec node should be disabled by default arm64: dts: meson-g12b-odroid-n2: add missing amlogic, s922x compatible arm64: dts: meson-gxm: fix gpu irq order arm64: dts: meson-g12a: fix gpu irq order ARM64: dts: amlogic: adds crypto hardware node arm64: dts: meson-gxbb-vega-s95: set rc-vega-s9x ir keymap arm64: dts: meson-gxm-vega-s96: set rc-vega-s9x ir keymap arm64: dts: meson: g12b: add cooling properties arm64: dts: meson: g12a: add cooling properties arm64: dts: meson: g12: Add minimal thermal zone arm64: dts: meson: g12: add temperature sensor arm64: dts: meson: sei610: enable audio arm64: dts: meson: sm1: add audio devices dt-bindings: clock: meson: add sm1 resets to the axg-audio controller dt-bindings: clk: axg-audio: add sm1 bindings arm64: dts: meson-g12: add support for simplefb arm64: dts: meson: g12a: add audio devices resets arm64: dts: meson: odroid-c2: Add missing regulator linked to HDMI supply arm64: dts: meson: odroid-c2: Add missing regulator linked to VDDIO_AO3V3 regulator ... Link: https://lore.kernel.org/r/7hd0dzs0m1.fsf@baylibre.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-10Merge tag 'v5.5-rockchip-dts64-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt One new soc the rk3308 with quad-Cortex-A35 cores. New boards are Beelink A1, roc-rk3308-cc, rk3308-evb A big number of improvements for the rk3399-roc-pc board (support for M.2 variant, reworked power-tree, buttons, leds) and further improvements of the px30-evb (usb2phy, otp controller, removal of default optee node - optee does add its own when loaded) And finally rk3328 audio support, sdmmc detection fix and enabled of the gpu on rk3399-puma. * tag 'v5.5-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (21 commits) arm64: dts: rockchip: fix sdmmc detection on boot on rk3328-roc-cc arm64: dts: rockchip: Split rk3399-roc-pc for with and without mezzanine board. arm64: dts: rockchip: Add Beelink A1 dt-bindings: ARM: rockchip: Add Beelink A1 arm64: dts: rockchip: Add RK3328 audio pipelines arm64: dts: rockchip: Add devicetree for board roc-rk3308-cc dt-bindings: Add doc for Firefly ROC-RK3308-CC board dt-bindings: clean up rockchip grf binding document arm64: dts: rockchip: Rework voltage supplies for regulators on rk3399-roc-pc arm64: dts: rockchip: Add vcc_sys enable pin on rk3399-roc-pc arm64: dts: rockchip: Add nodes for buttons on rk3399-roc-pc arm64: dts: rockchip: enable usb2phy on px30-evb arm64: dts: rockchip: add usb2phy for px30 arm64: dts: rockchip: remove px30 default optee node arm64: dts: rockchip: enable gpu on rk3399-puma arm64: dts: rockchip: add px30 otp controller arm64: dts: rockchip: Add LED nodes on rk3399-roc-pc arm64: dts: rockchip: Add basic dts for RK3308 EVB dt-bindings: Add doc for rk3308-evb arm64: dts: rockchip: Add core dts for RK3308 SOC ... Link: https://lore.kernel.org/r/12204771.K8DX0fml49@phil Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-10Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "A set of fixes that have trickled in over the last couple of weeks: - MAINTAINER update for Cavium/Marvell ThunderX2 - stm32 tweaks to pinmux for Joystick/Camera, and RAM allocation for CAN interfaces - i.MX fixes for voltage regulator GPIO mappings, fixes voltage scaling issues - More i.MX fixes for various issues on i.MX eval boards: interrupt storm due to u-boot leaving pins in new states, fixing power button config, a couple of compatible-string corrections. - Powerdown and Suspend/Resume fixes for Allwinner A83-based tablets - A few documentation tweaks and a fix of a memory leak in the reset subsystem" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: MAINTAINERS: update Cavium ThunderX2 maintainers ARM: dts: stm32: change joystick pinctrl definition on stm32mp157c-ev1 ARM: dts: stm32: remove OV5640 pinctrl definition on stm32mp157c-ev1 ARM: dts: stm32: Fix CAN RAM mapping on stm32mp157c ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157 arm64: dts: zii-ultra: fix ARM regulator GPIO handle ARM: sunxi: Fix CPU powerdown on A83T ARM: dts: sun8i-a83t-tbs-a711: Fix WiFi resume from suspend arm64: dts: imx8mn: fix compatible string for sdma arm64: dts: imx8mm: fix compatible string for sdma reset: fix reset_control_ops kerneldoc comment ARM: dts: imx6-logicpd: Re-enable SNVS power key soc: imx: gpc: fix initialiser format ARM: dts: imx6qdl-sabreauto: Fix storm of accelerometer interrupts arm64: dts: ls1028a: fix a compatible issue reset: fix reset_control_get_exclusive kerneldoc comment reset: fix reset_control_lookup kerneldoc comment reset: fix of_reset_control_get_count kerneldoc comment reset: fix of_reset_simple_xlate kerneldoc comment reset: Fix memory leak in reset_control_array_put()
2019-11-10arm64: dts: mt8183: add systimer0 device nodeDehui Sun
Add systimer device node for MT8183. Signed-off-by: Dehui Sun <dehui.sun@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2019-11-09media: arm64: dts: allwinner: beelink-gs1: Add rc-beelink-gs1 keymapClément Péron
Beelink GS1 ships with a NEC remote control. Add the rc keymap to the device-tree. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2019-11-09arm64: dts: rockchip: fix sdmmc detection on boot on rk3328-roc-ccPeter Geis
With working GPIO, during init the GPIO state s reset. This causes the sdmmc regulator to shut down, preventing detection. Removing and replacing the card will allow it to be detected, but that should not be necessary. Fix this by setting the regulator on at boot. Signed-off-by: Peter Geis <pgwipeout@gmail.com> Link: https://lore.kernel.org/r/20191016185945.1962-1-pgwipeout@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-11-08arm64: dts: rockchip: Split rk3399-roc-pc for with and without mezzanine board.Markus Reichl
For rk3399-roc-pc is a mezzanine board available that carries M.2 and POE interfaces. Use it with a separate dts. Signed-off-by: Markus Reichl <m.reichl@fivetechno.de> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/0fb4e21a-fe78-00aa-6142-ca8682a913eb@fivetechno.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-11-08arm64: dts: rockchip: Add Beelink A1Robin Murphy
Beelink A1 is a TV box implementing the higher-end options of the RK3328 reference design - the DTB from the stock Android firmware is clearly the "rk3328-box-plus" variant from the Rockchip 3.10 BSP with minor modifications to accommodate the USB WiFi module and additional VFD-style LED driver. It features: - 4GB of 32-bit LPDDR3 - 16GB of HS200 eMMC (newer models with 32GB also exist) - Realtek RTL8211F phy for gigabit ethernet - Fn-Link 6221E-UUC module (RealTek RTL8821CU) for 11ac WiFi and Bluetooth 4.2 - HDMI and analog A/V - 1x USB 3.0 type A host, 1x USB 2.0 type A OTG, 1x micro SD - IR receiver and a neat little LED clock display. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/2aa21c5f3020062cf6a47057bdf3c01f0ec863ea.1571090991.git.robin.murphy@arm.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-11-08arm64: dts: rockchip: Add RK3328 audio pipelinesRobin Murphy
The audio pipelines for HDMI and the analog codec are internal to the SoC, so it makes sense to describe them at that level such that boards need only enable the respective nodes for outputs they implement. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/a09c8d795e7a66fb7bc47af2b6580f6e8dbec91e.1571090991.git.robin.murphy@arm.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-11-08Merge tag 'ti-k3-soc-for-v5.5' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into arm/dt Texas Instruments K3 SoC family changes for 5.5 - Add USB support for J721E - Add mailbox support for AM65x and J721E - Add MMC/SD support for J721E - Disable WP for AM654 MMC0 * tag 'ti-k3-soc-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux: arm64: dts: ti: k3-j721e-common-proc-board: Add USB ports arm64: dts: ti: k3-j721e-main: add USB controller nodes arm64: dts: ti: k3-am654-base-board: Add disable-wp for mmc0 arm64: dts: ti: j721e-common-proc-board: Add Support for eMMC and SD card arm64: dts: ti: j721e-main: Add SDHCI nodes arm64: dts: ti: k3-j721e-common-proc-board: Add IPC sub-mailbox nodes arm64: dts: ti: k3-j721e-main: Add mailbox cluster nodes arm64: dts: ti: k3-am65-base-board: Add IPC sub-mailbox nodes for R5Fs arm64: dts: ti: k3-am65-main: Add mailbox cluster nodes Link: https://lore.kernel.org/r/681f1bb5-d28c-a302-690a-82f0be4a7f34@ti.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-08Merge tag 'zynqmp-dt-for-v5.5' of https://github.com/Xilinx/linux-xlnx into ↵Olof Johansson
arm/dt arm64: dts: zynqmp: DT changes for v5.5 - Add firmware node with fpga and nvmem support * tag 'zynqmp-dt-for-v5.5' of https://github.com/Xilinx/linux-xlnx: arm64: zynqmp: Add support for zynqmp nvmem firmware driver arm64: zynqmp: Label whole PL part as fpga_full region arm64: zynqmp: Add support for zynqmp fpga manager arm64: zynqmp: Add firmware DT node Link: https://lore.kernel.org/r/543394c2-ddff-33be-4c90-e01847539c64@monstr.eu Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-08arm64: dts: ti: k3-j721e-common-proc-board: Add USB portsRoger Quadros
Add USB0 as otg port and USB1 as host port. Although USB0 can be used at super-speed, limit the speed to high-speed for now till SERDES PHY support is added. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2019-11-08arm64: dts: ti: k3-j721e-main: add USB controller nodesRoger Quadros
J721e has 2 USB super-speed controllers add them. The USB2 PHY doesn't need any configuration. USB3 PHY needs to be implemented using the Cadence Sierra PHY. This support will be added later. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2019-11-06Merge tag 'qcom-arm64-for-5.5' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM64 Updates for v5.5 * Add thermal IRQ support on MSM8916, SDM845, MSM8996, and QCS404 * Fix thermal HW ids for cpus on MSM8916 * Add blsp1 UART3 and blsp1 BAM on MSM8998 * Add volume buttons and WCNSS for Wifi and BT on MSM8916 LongCheer-l8150 * Fixup load on l21 for SD on apq8096-db820c * Enable LVS1/2, APSS watchdog, and select UFS reset gpio for SDM845 * Disable coresight by default on MSM8998 * Enable bluetooth and remove retention idle state on MSM8998-clamshell * Enable adsp, cdsp, and mpss on C630 * Enable bluetooth on MSM8998-mtp * Delete zap shader on SDM845-cheza * Add tactile buttons and hall sensor on MSM8916-Samsung-A2015 * Add Interconnect nodes, watchdog, and sleep clk on QCS404 * Override Iris compatible on MSM8916-Samsung-A5U * Enable WCNSS Wifi and bluetooth on MSM8916-Samsung-A2015 * Fixup cooling states for the aoss warming devices * tag 'qcom-arm64-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (26 commits) arm64: dts: qcom: db845c: Enable LVS 1 and 2 arm64: dts: qcom: msm8998: Disable coresight by default arm64: dts: qcom: msm8998-clamshell: Remove retention idle state arm64: dts: qcom: sdm845-cheza: delete zap-shader arm64: dts: msm8916: thermal: Fixup HW ids for cpu sensors arm64: dts: sdm845: thermal: Add interrupt support arm64: dts: msm8996: thermal: Add interrupt support arm64: dts: msm8998: thermal: Add interrupt support arm64: dts: qcs404: thermal: Add interrupt support arm64: dts: qcom: sdm845: Add APSS watchdog node arm64: dts: qcom: c630: Enable adsp, cdsp and mpss arm64: dts: qcom: msm8998-clamshell: Enable bluetooth arm64: dts: qcom: msm8998-mtp: Enable bluetooth arm64: dts: qcom: msm8998: Add blsp1_uart3 arm64: dts: qcom: msm8998: Add blsp1 BAM arm64: dts: msm8916-longcheer-l8150: Add Volume buttons arm64: dts: msm8916-longcheer-l8150: Enable WCNSS for WiFi and BT soc: qcom: Invert the cooling states for the aoss warming devices arm64: dts: apq8096-db820c: Increase load on l21 for SDCARD arm64: dts: msm8916-samsung-a2015: add tactile buttons and hall sensor ... Link: https://lore.kernel.org/r/1573068840-13098-2-git-send-email-agross@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-06arm64: dts: meson-gx: fix i2c compatibleNeil Armstrong
This fixes the following DT schemas check errors: meson-gxbb-nanopi-k2.dt.yaml: i2c@8500: compatible: Additional items are not allowed ('amlogic,meson-gxbb-i2c' was unexpected) meson-gxbb-nanopi-k2.dt.yaml: i2c@8500: compatible:0: 'amlogic,meson-gx-i2c' is not one of ['amlogic,meson6-i2c', 'amlogic,meson-gxbb-i2c', 'amlogic,meson-axg-i2c'] meson-gxbb-nanopi-k2.dt.yaml: i2c@8500: compatible: ['amlogic,meson-gx-i2c', 'amlogic,meson-gxbb-i2c'] is too long Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-11-06arm64: dts: meson-gx: cec node should be disabled by defaultNeil Armstrong
This fixes the following DT schemas check errors: meson-gxl-s905x-hwacom-amazetv.dt.yaml: cec@100: 'hdmi-phandle' is a required property meson-gxm-rbox-pro.dt.yaml: cec@100: 'hdmi-phandle' is a required property because CEC is not enabled on these boards. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-11-06arm64: dts: meson-g12b-odroid-n2: add missing amlogic, s922x compatibleNeil Armstrong
This fixes the following DT schemas check errors: meson-g12b-odroid-n2.dt.yaml: /: compatible: ['hardkernel,odroid-n2', 'amlogic,g12b'] is not valid under any of the given schemas Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-11-06arm64: dts: meson-gxm: fix gpu irq orderNeil Armstrong
This fixes the following DT schemas check errors: meson-gxm-khadas-vim2.dt.yaml: gpu@c0000: interrupt-names:0: 'job' was expected meson-gxm-khadas-vim2.dt.yaml: gpu@c0000: interrupt-names:2: 'gpu' was expected Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-11-06arm64: dts: meson-g12a: fix gpu irq orderNeil Armstrong
This fixes the following DT schemas check errors: meson-g12b-s922x-khadas-vim3.dt.yaml: gpu@ffe40000: interrupt-names:0: 'job' was expected meson-g12b-s922x-khadas-vim3.dt.yaml: gpu@ffe40000: interrupt-names:2: 'gpu' was expected Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-11-06Merge tag 'imx-dt64-tmu-5.5' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt LX2160A TMU support for 5.5: - Add TMU (Thermal Monitoring Unit) device node to enable thermal support on LX2160A SoC. * tag 'imx-dt64-tmu-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: lx2160a: add tmu device node ARM: imx_v6_v7_defconfig: Enable CONFIG_DRM_MSM arm64: dts: imx8mn: Use correct clock for usdhc's ipg clk arm64: dts: imx8mm: Use correct clock for usdhc's ipg clk arm64: dts: imx8mq: Use correct clock for usdhc's ipg clk ARM: dts: imx7s: Correct GPT's ipg clock source ARM: dts: vf610-zii-scu4-aib: Specify 'i2c-mux-idle-disconnect' ARM: dts: imx6q-logicpd: Re-Enable SNVS power key arm64: dts: lx2160a: Correct CPU core idle state name arm64: dts: zii-ultra: fix ARM regulator states soc: imx: imx-scu: Getting UID from SCU should have response Link: https://lore.kernel.org/r/20191105150315.15477-6-shawnguo@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-06Merge tag 'imx-dt64-5.5' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX arm64 device tree changes for 5.5: - Add the initial support for a new arm64 family SoC from NXP: S32V234 ("Treerunner") vision microprocessors which are targeted for high-performance, computationally intensive vision and sensor fusion applications that require automotive safety levels. - New board support: i.MX8MN LPDDR4 EVK, i.MX8QXP Colibri and S32V234 EVB. - A series of patch from Andrey Smirnov to improve zii-ultra support by fixing regulator and adding accelerometer, switch watchdog. - Add system counter device and enable cpuidle support for i.MX8MN. - Move usdhc clocks assignment from SoC to board level DTS for i.MX8 based boards. - Add PCA6416 on I2C3 bus for imx8mm-evk, and enable SCU key for imx8qxp-mek board. - Enable GPU passive throttling on i.MX8MQ SoC, and add DDR PMU device for i.MX8MN. - A series from Fabio Estevam to fix DTC W=1 warnings for LS1028A device. - Update the clock providers for the Mali DP500 and '#clock-cells' of DPCLK node for LS1028A SoC. - Misc small updates on various boards. * tag 'imx-dt64-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (40 commits) arm64: dts: imx8mn-evk: Remove invalid Atheros properties arm64: dts: freescale: add initial support for colibri imx8x arm64: dts: ls1028a: Fix tmu unit address arm64: dts: ls1028a: Move thermal-zone out of SoC arm64: dts: ls1028a-qds: Remove unnecessary #address-cells/#size-cells arm64: dts: imx8mn: Remove duplicated machine compatible arm64: dts: imx8mm: Remove duplicated machine compatible arm64: dts: imx8mq-evk: Add remote control arm64: dts: imx8mn: Add LPDDR4 EVK board support arm64: dts: imx8mn: Create EVK dtsi file for common use arm64: dts: imx8mn: Move usdhc clocks assignment to board DT arm64: dts: imx8mm: Move usdhc clocks assignment to board DT arm64: dts: imx8mq: Move usdhc clocks assignment to board DT arm64: dts: imx8qxp: Move usdhc clocks assignment to board DT arm64: dts: fsl: Add device tree for S32V234-EVB arm64: dts: imx8mm-evk: Assigned clocks for audio plls arm64: dts: zii-ultra: Add node for switch watchdog arm64: dts: zii-ultra: Add node for accelerometer arm64: dts: zii-ultra: Fix regulator-3p3-main's name arm64: dts: zii-ultra: Fix regulator-vsd-3v3's vin-supply ... Link: https://lore.kernel.org/r/20191105150315.15477-5-shawnguo@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-06Merge tag 'sunxi-dt-for-5.5-2' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt A few more DT patches for 5.5, mostly: - USB3 support for the H6 - Deinterlacer support for the H3 - eDP Bridge support on the Teres-I - More DT cleanups thanks to the validation * tag 'sunxi-dt-for-5.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: h6: Remove useless reset name ARM: dts: sun6i: Remove useless reset-names arm64: dts: allwinner: orange-pi-3: Enable USB 3.0 host support arm64: dts: allwinner: h6: add USB3 device nodes dt-bindings: Add ANX6345 DP/eDP transmitter binding arm64: dts: allwinner: a64: enable ANX6345 bridge on Teres-I dts: arm: sun8i: h3: Enable deinterlace unit ARM: dts: sunxi: h3/h5: Add MBUS controller node dt-bindings: bus: sunxi: Add H3 MBUS compatible Link: https://lore.kernel.org/r/58ad00a8-9579-4811-969a-a74e331ee9a2.lettre@localhost Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-06Merge tag 'sunxi-fixes-for-5.4-3' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt One patch to add back the PMU node that was removed because the interrupts were improper in a previous fixes PR. * tag 'sunxi-fixes-for-5.4-3' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: a64: Re-add PMU node ARM: sunxi: Fix CPU powerdown on A83T ARM: dts: sun8i-a83t-tbs-a711: Fix WiFi resume from suspend ARM: dts: sun7i: Drop the module clock from the device tree dt-bindings: media: sun4i-csi: Drop the module clock media: dt-bindings: Fix building error for dt_binding_check arm64: dts: allwinner: a64: sopine-baseboard: Add PHY regulator delay arm64: dts: allwinner: a64: Drop PMU node arm64: dts: allwinner: a64: pine64-plus: Add PHY regulator delay Link: https://lore.kernel.org/r/45023fa6-b2bc-4934-b85c-3e7841dde0b1.lettre@localhost Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-06arm64: dts: allwinner: a64: Re-add PMU nodeAndre Przywara
As it was found recently, the Performance Monitoring Unit (PMU) on the Allwinner A64 SoC was not generating (the right) interrupts. With the SPI numbers from the manual the kernel did not receive any overflow interrupts, so perf was not happy at all. It turns out that the numbers were just off by 4, so the PMU interrupts are from 148 to 151, not from 152 to 155 as the manual describes. This was found by playing around with U-Boot, which typically does not use interrupts, so the GIC is fully available for experimentation: With *every* PPI and SPI enabled, an overflowing PMU cycle counter was found to set a bit in one of the GICD_ISPENDR registers, with careful counting this was determined to be number 148. Tested with perf record and perf top on a Pine64-LTS. Also tested with tasksetting to every core to confirm the assignment between IRQs and cores. This somewhat "revert-fixes" commit ed3e9406bcbc ("arm64: dts: allwinner: a64: Drop PMU node"). Fixes: 34a97fcc71c2 ("arm64: dts: allwinner: a64: Add PMU node") Fixes: ed3e9406bcbc ("arm64: dts: allwinner: a64: Drop PMU node") Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-11-05arm64: dts: rockchip: Add devicetree for board roc-rk3308-ccAndy Yan
ROC-RK3308-CC is a rk3308 based board designed by Firelfy, with eMMC and 256MB DDR3 and RTL8188 Wifi on board. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Link: https://lore.kernel.org/r/20191030072811.29882-1-andy.yan@rock-chips.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-11-05arm64: dts: rockchip: Rework voltage supplies for regulators on rk3399-roc-pcMarkus Reichl
Correct the voltage supplies according to the board schematics ROC-3399-PC-V10-A-20180804. Signed-off-by: Markus Reichl <m.reichl@fivetechno.de> Link: https://lore.kernel.org/r/22b56700-3c9e-0f60-cd74-7ff24d4f1a23@fivetechno.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-11-05arm64: dts: rockchip: Add vcc_sys enable pin on rk3399-roc-pcMarkus Reichl
rk3399-roc-pc has vcc_sys 5V supply for USB and other peripherals. Add the GPIO pin to enable the regulator. Signed-off-by: Markus Reichl <m.reichl@fivetechno.de> Link: https://lore.kernel.org/r/c72db0ad-c261-af4f-efe6-22bbcf4a0b7b@fivetechno.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-11-05arm64: dts: rockchip: Add nodes for buttons on rk3399-roc-pcMarkus Reichl
rk3399-roc-pc has a power and a recovery button, enable them. Signed-off-by: Markus Reichl <m.reichl@fivetechno.de> Link: https://lore.kernel.org/r/1ce152cc-bd6b-63af-7892-221e084d087f@fivetechno.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-11-05arm64: dts: rockchip: enable usb2phy on px30-evbHeiko Stuebner
Enable the phy node ion the px30 evb board. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20190917082659.25549-13-heiko@sntech.de
2019-11-05arm64: dts: rockchip: add usb2phy for px30Heiko Stuebner
Add the usb2phy node on the px30 and hook it up to the usb controllers it supplies. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20190917082659.25549-12-heiko@sntech.de
2019-11-05arm64: dts: rockchip: remove px30 default optee nodeHeiko Stuebner
Having a default optee node in a soc devicetree is not really good. For one there is no guarantee that any tee got loaded and there's even the possibility that a completely different TEE got loaded. OP-Tee however will insert relevant nodes to the devicetree (firmware +reserved memory sections) during its own startup, so there really is no need to provide a default node. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20191023224409.3550-1-heiko@sntech.de
2019-11-05arm64: dts: rockchip: enable gpu on rk3399-pumaHeiko Stuebner
Set the supplying regulator and enable the gpu node on the rk3399-puma som. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20191023223954.3139-1-heiko@sntech.de
2019-11-05arm64: dts: rockchip: add px30 otp controllerHeiko Stuebner
The px30 soc contains a controller for one-time-programmable memory, so add the necessary node for it and the fields defined in it by default. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20191023224113.3268-1-heiko@sntech.de
2019-11-05arm64: dts: allwinner: h6: Remove useless reset nameMaxime Ripard
The TCON TOP node in the H6 DTSI has a reset name that isn't described in the binding. Remove it. Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-11-05arm64: dts: allwinner: orange-pi-3: Enable USB 3.0 host supportOndrej Jirman
Enable Allwinner's USB 3.0 phy and the host controller. Orange Pi 3 board has GL3510 USB 3.0 4-port hub connected to the SoC's USB 3.0 port. All four ports are exposed via USB3-A connectors. VBUS is always on, since it's powered directly from DCIN (VCC-5V) and not switchable. Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-11-05arm64: dts: allwinner: h6: add USB3 device nodesIcenowy Zheng
Allwinner H6 SoC features USB3 functionality, with a DWC3 controller and a custom PHY. Add device tree nodes for them. Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-11-05arm64: dts: allwinner: a64: enable ANX6345 bridge on Teres-ITorsten Duwe
Teres-I has an anx6345 bridge connected to the RGB666 LCD output, and the I2C controlling signals are connected to I2C0 bus. Enable it in the device tree, and enable the display engine, video mixer and tcon0 as well. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Torsten Duwe <duwe@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-11-04Merge tag 'imx-fixes-5.4-3' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.4, 3rd round: - Fix the GPIO number that is controlling core voltage on imx8mq-zii-ultra board. * tag 'imx-fixes-5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: zii-ultra: fix ARM regulator GPIO handle Link: https://lore.kernel.org/r/20191104084513.GW24620@dragon Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-04arm64: dts: imx8mn-evk: Remove invalid Atheros propertiesFabio Estevam
None of these at803x properties are documented anywhere, so just remove them. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-11-04arm64: dts: zii-ultra: fix ARM regulator GPIO handleLucas Stach
The GPIO handle is referencing the wrong GPIO, so the voltage did not actually change as intended. The pinmux is already correct, so just correct the GPIO number. Fixes: 4a13b3bec3b4 (arm64: dts: imx: add Zii Ultra board support) Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit (git 2.34.1) at 2024-06-10 15:55:11 +0000