| Age | Commit message (Collapse) | Author |
|---|
|
Function profile sequence on powerpc includes two instructions at the
beginning of each function:
mflr r0
bl ftrace_caller
The call to ftrace_caller() gets nop'ed out during kernel boot and is
patched in when ftrace is enabled.
Given the sequence, we cannot return from ftrace_caller with 'blr' as we
need to keep LR and r0 intact. This results in link stack (return
address predictor) imbalance when ftrace is enabled. To address that, we
would like to use a three instruction sequence:
mflr r0
bl ftrace_caller
mtlr r0
Further more, to support DYNAMIC_FTRACE_WITH_CALL_OPS, we need to
reserve two instruction slots before the function. This results in a
total of five instruction slots to be reserved for ftrace use on each
function that is traced.
Move the function profile sequence out-of-line to minimize its impact.
To do this, we reserve a single nop at function entry using
-fpatchable-function-entry=1 and add a pass on vmlinux.o to determine
the total number of functions that can be traced. This is then used to
generate a .S file reserving the appropriate amount of space for use as
ftrace stubs, which is built and linked into vmlinux.
On bootup, the stub space is split into separate stubs per function and
populated with the proper instruction sequence. A pointer to the
associated stub is maintained in dyn_arch_ftrace.
For modules, space for ftrace stubs is reserved from the generic module
stub space.
This is restricted to and enabled by default only on 64-bit powerpc,
though there are some changes to accommodate 32-bit powerpc. This is
done so that 32-bit powerpc could choose to opt into this based on
further tests and benchmarks.
As an example, after this patch, kernel functions will have a single nop
at function entry:
<kernel_clone>:
addis r2,r12,467
addi r2,r2,-16028
nop
mfocrf r11,8
...
When ftrace is enabled, the nop is converted to an unconditional branch
to the stub associated with that function:
<kernel_clone>:
addis r2,r12,467
addi r2,r2,-16028
b ftrace_ool_stub_text_end+0x11b28
mfocrf r11,8
...
The associated stub:
<ftrace_ool_stub_text_end+0x11b28>:
mflr r0
bl ftrace_caller
mtlr r0
b kernel_clone+0xc
...
This change showed an improvement of ~10% in null_syscall benchmark on a
Power 10 system with ftrace enabled.
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241030070850.1361304-13-hbathini@linux.ibm.com
|
|
When building with LLVM_IAS=1, there is an error because
'-fatal-warnings' is not recognized as a valid flag:
clang: error: unsupported argument '-fatal-warnings' to option '-Wa,'
Use the double hyphen version of the flag, '--fatal-warnings', which
works with both the GNU assembler and LLVM's integrated assembler.
Fixes: 608d4a5ca563 ("powerpc: Error on assembly warnings")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240405-ppc-fix-wa-fatal-warnings-clang-v1-1-bdcd969f2ef0@kernel.org
|
|
We currently enable -Werror on the arch/powerpc subtree. However this
only catches C warnings. Assembly warnings are logged, but the make
invocation will still succeed. This can allow incorrect syntax such as
ori r3, r4, r5
to be compiled without catching that the assembler is treating r5
as the immediate value 5.
To prevent this in assembly files and inline assembly, add the
-fatal-warnings option to assembler invocations.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Tested-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240326044420.577031-1-bgray@linux.ibm.com
|
|
Documentation/kbuild/makefiles.rst suggests to use "archclean" for
cleaning arch/$(SRCARCH)/boot/, but it is not a hard requirement.
Since commit d92cc4d51643 ("kbuild: require all architectures to have
arch/$(SRCARCH)/Kbuild"), we can use the "subdir- += boot" trick for
all architectures. This can take advantage of the parallel option (-j)
for "make clean".
I also cleaned up the comments in arch/$(SRCARCH)/Makefile. The "archdep"
target no longer exists.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
|
|
arch/powerpc/kernel/ contains 8 files dedicated to kexec.
Move them into a dedicated subdirectory.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Move to a/p/kexec, drop the 'machine' naming and use 'core' instead]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/afbef97ec6a978574a5cf91a4441000e0a9da42a.1572351221.git.christophe.leroy@c-s.fr
|
|
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Back when I added -Werror in commit ba55bd74360e ("powerpc: Add
configurable -Werror for arch/powerpc") I did it by adding it to most
of the arch Makefiles.
At the time we excluded math-emu, because apparently it didn't build
cleanly. But that seems to have been fixed somewhere in the interim.
So move the -Werror addition to the top-level of the arch, this saves
us from repeating it in every Makefile and means we won't forget to
add it to any new sub-dirs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This is a nice cleanup, arch/powerpc/Makefile is long and messy so
moving this out helps a little.
It also allows us to do:
$ make arch/powerpc
Which can be helpful if you just want to compile test some changes to
arch code and not link everything.
Finally it also gives us a single place to do subdir-cc-flags
assignments which affect the whole of arch/powerpc, which we will do
in a future patch.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
