| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull nvdimm updates from Ira Weiny:
"The changes include removing duplicate code and updating the nvdimm
tree to the current kernel interfaces such as using const for struct
device_type and changing the platform remove callback signature"
* tag 'libnvdimm-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: remove redundant assignment to variable rc
ndtest: Convert to platform remove callback returning void
nvdimm/btt: always set max_integrity_segments
nvdimm: remove nd_integrity_init
dax: constify the struct device_type usage
powerpc/papr_scm: Move duplicate definitions to common header files
|
|
papr_scm and ndtest share common PDSM payload structs like
nd_papr_pdsm_health. Presently these structs are duplicated across
papr_pdsm.h and ndtest.h header files. Since 'ndtest' is essentially
arch independent and can run on platforms other than PPC64, a way
needs to be deviced to avoid redundancy and duplication of PDSM
structs in future.
So the patch proposes moving the PDSM header from arch/powerpc/include-
-/uapi/ to the generic include/uapi/linux directory. Also, there
are some #defines common between papr_scm and ndtest which are not
exported to the user space. So, move them to a header file which
can be shared across ndtest and papr_scm via newly introduced
include/linux/papr_scm.h.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Suggested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Link: https://lore.kernel.org/r/170638176942.112443.2937254675538057083.stgit@ltcd48-lp2.aus.stglab.ibm.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
|
|
At the time of LPAR boot up, partition firmware provides Open Firmware
property ibm,dma-window for the PE. This property is provided on the PCI
bus the PE is attached to.
There are execptions where the partition firmware might not provide this
property for the PE at the time of LPAR boot up. One of the scenario is
where the firmware has frozen the PE due to some error condition. This
PE is frozen for 24 hours or unless the whole system is reinitialized.
Within this time frame, if the LPAR is booted, the frozen PE will be
presented to the LPAR but ibm,dma-window property could be missing.
Today, under these circumstances, the LPAR oopses with NULL pointer
dereference, when configuring the PCI bus the PE is attached to.
BUG: Kernel NULL pointer dereference on read at 0x000000c8
Faulting instruction address: 0xc0000000001024c0
Oops: Kernel access of bad area, sig: 7 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
Modules linked in:
Supported: Yes
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.4.0-150600.9-default #1
Hardware name: IBM,9043-MRX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NM1060_023) hv:phyp pSeries
NIP: c0000000001024c0 LR: c0000000001024b0 CTR: c000000000102450
REGS: c0000000037db5c0 TRAP: 0300 Not tainted (6.4.0-150600.9-default)
MSR: 8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 28000822 XER: 00000000
CFAR: c00000000010254c DAR: 00000000000000c8 DSISR: 00080000 IRQMASK: 0
...
NIP [c0000000001024c0] pci_dma_bus_setup_pSeriesLP+0x70/0x2a0
LR [c0000000001024b0] pci_dma_bus_setup_pSeriesLP+0x60/0x2a0
Call Trace:
pci_dma_bus_setup_pSeriesLP+0x60/0x2a0 (unreliable)
pcibios_setup_bus_self+0x1c0/0x370
__of_scan_bus+0x2f8/0x330
pcibios_scan_phb+0x280/0x3d0
pcibios_init+0x88/0x12c
do_one_initcall+0x60/0x320
kernel_init_freeable+0x344/0x3e4
kernel_init+0x34/0x1d0
ret_from_kernel_user_thread+0x14/0x1c
Fixes: b1fc44eaa9ba ("pseries/iommu/ddw: Fix kdump to work in absence of ibm,dma-window")
Signed-off-by: Gaurav Batra <gbatra@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240422205141.10662-1-gbatra@linux.ibm.com
|
|
Currently, plpks_confirm_object_flushed() function polls for 5msec in
total instead of 5sec.
Keep max polling time consistent for all the H_CALLs, which take longer
than expected, to be 5sec. Also, make use of fsleep() everywhere to
insert delay.
Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Fixes: 2454a7af0f2a ("powerpc/pseries: define driver for Platform KeyStore")
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240418031230.170954-1-nayna@linux.ibm.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add AT_HWCAP3 and AT_HWCAP4 aux vector entries for future use
by glibc
- Add support for recognising the Power11 architected and raw PVRs
- Add support for nr_cpus=n on the command line where the
boot CPU is >= n
- Add ppcxx_allmodconfig targets for all 32-bit sub-arches
- Other small features, cleanups and fixes
Thanks to Akanksha J N, Brian King, Christophe Leroy, Dawei Li, Geoff
Levand, Greg Kroah-Hartman, Jan-Benedict Glaw, Kajol Jain, Kunwu Chan,
Li zeming, Madhavan Srinivasan, Masahiro Yamada, Nathan Chancellor,
Nicholas Piggin, Peter Bergner, Qiheng Lin, Randy Dunlap, Ricardo B.
Marliere, Rob Herring, Sathvika Vasireddy, Shrikanth Hegde, Uwe
Kleine-König, Vaibhav Jain, and Wen Xiong.
* tag 'powerpc-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (71 commits)
powerpc/macio: Make remove callback of macio driver void returned
powerpc/83xx: Fix build failure with FPU=n
powerpc/64s: Fix get_hugepd_cache_index() build failure
powerpc/4xx: Fix warp_gpio_leds build failure
powerpc/amigaone: Make several functions static
powerpc/embedded6xx: Fix no previous prototype for avr_uart_send() etc.
macintosh/adb: make adb_dev_class constant
powerpc: xor_vmx: Add '-mhard-float' to CFLAGS
powerpc/fsl: Fix mfpmr() asm constraint error
powerpc: Remove cpu-as-y completely
powerpc/fsl: Modernise mt/mfpmr
powerpc/fsl: Fix mfpmr build errors with newer binutils
powerpc/64s: Use .machine power4 around dcbt
powerpc/64s: Move dcbt/dcbtst sequence into a macro
powerpc/mm: Code cleanup for __hash_page_thp
powerpc/hv-gpci: Fix the H_GET_PERF_COUNTER_INFO hcall return value checks
powerpc/irq: Allow softirq to hardirq stack transition
powerpc: Stop using of_root
powerpc/machdep: Define 'compatibles' property in ppc_md and use it
of: Reimplement of_machine_is_compatible() using of_machine_compatible_match()
...
|
|
Replace all usages of of_root by of_find_node_by_path("/")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231214103152.12269-5-mpe@ellerman.id.au
|
|
`buf` is allocated in papr_get_attr(), and krealloc() of `buf`
could fail. We need to free the original `buf` in the case of failure.
Fixes: 3c14b73454cf ("powerpc/pseries: Interface to represent PAPR firmware attributes")
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20221208133449.16284-1-linqiheng@huawei.com
|
|
Some devices are not capable of addressing 64 bits
via DMA, which includes MSI-X vectors. This allows
us to ensure these devices use MSI-X vectors in
32 bit space.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240117214632.134539-1-brking@linux.vnet.ibm.com
|
|
When kdump kernel tries to copy dump data over SR-IOV, LPAR panics due
to NULL pointer exception:
Kernel attempted to read user page (0) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x00000000
Faulting instruction address: 0xc000000020847ad4
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: mlx5_core(+) vmx_crypto pseries_wdt papr_scm libnvdimm mlxfw tls psample sunrpc fuse overlay squashfs loop
CPU: 12 PID: 315 Comm: systemd-udevd Not tainted 6.4.0-Test102+ #12
Hardware name: IBM,9080-HEX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_008) hv:phyp pSeries
NIP: c000000020847ad4 LR: c00000002083b2dc CTR: 00000000006cd18c
REGS: c000000029162ca0 TRAP: 0300 Not tainted (6.4.0-Test102+)
MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 48288244 XER: 00000008
CFAR: c00000002083b2d8 DAR: 0000000000000000 DSISR: 40000000 IRQMASK: 1
...
NIP _find_next_zero_bit+0x24/0x110
LR bitmap_find_next_zero_area_off+0x5c/0xe0
Call Trace:
dev_printk_emit+0x38/0x48 (unreliable)
iommu_area_alloc+0xc4/0x180
iommu_range_alloc+0x1e8/0x580
iommu_alloc+0x60/0x130
iommu_alloc_coherent+0x158/0x2b0
dma_iommu_alloc_coherent+0x3c/0x50
dma_alloc_attrs+0x170/0x1f0
mlx5_cmd_init+0xc0/0x760 [mlx5_core]
mlx5_function_setup+0xf0/0x510 [mlx5_core]
mlx5_init_one+0x84/0x210 [mlx5_core]
probe_one+0x118/0x2c0 [mlx5_core]
local_pci_probe+0x68/0x110
pci_call_probe+0x68/0x200
pci_device_probe+0xbc/0x1a0
really_probe+0x104/0x540
__driver_probe_device+0xb4/0x230
driver_probe_device+0x54/0x130
__driver_attach+0x158/0x2b0
bus_for_each_dev+0xa8/0x130
driver_attach+0x34/0x50
bus_add_driver+0x16c/0x300
driver_register+0xa4/0x1b0
__pci_register_driver+0x68/0x80
mlx5_init+0xb8/0x100 [mlx5_core]
do_one_initcall+0x60/0x300
do_init_module+0x7c/0x2b0
At the time of LPAR dump, before kexec hands over control to kdump
kernel, DDWs (Dynamic DMA Windows) are scanned and added to the FDT.
For the SR-IOV case, default DMA window "ibm,dma-window" is removed from
the FDT and DDW added, for the device.
Now, kexec hands over control to the kdump kernel.
When the kdump kernel initializes, PCI busses are scanned and IOMMU
group/tables created, in pci_dma_bus_setup_pSeriesLP(). For the SR-IOV
case, there is no "ibm,dma-window". The original commit: b1fc44eaa9ba,
fixes the path where memory is pre-mapped (direct mapped) to the DDW.
When TCEs are direct mapped, there is no need to initialize IOMMU
tables.
iommu_table_setparms_lpar() only considers "ibm,dma-window" property
when initiallizing IOMMU table. In the scenario where TCEs are
dynamically allocated for SR-IOV, newly created IOMMU table is not
initialized. Later, when the device driver tries to enter TCEs for the
SR-IOV device, NULL pointer execption is thrown from iommu_area_alloc().
The fix is to initialize the IOMMU table with DDW property stored in the
FDT. There are 2 points to remember:
1. For the dedicated adapter, kdump kernel would encounter both
default and DDW in FDT. In this case, DDW property is used to
initialize the IOMMU table.
2. A DDW could be direct or dynamic mapped. kdump kernel would
initialize IOMMU table and mark the existing DDW as
"dynamic". This works fine since, at the time of table
initialization, iommu_table_clear() makes some space in the
DDW, for some predefined number of TCEs which are needed for
kdump to succeed.
Fixes: b1fc44eaa9ba ("pseries/iommu/ddw: Fix kdump to work in absence of ibm,dma-window")
Signed-off-by: Gaurav Batra <gbatra@linux.vnet.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240125203017.61014-1-gbatra@linux.ibm.com
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/34847d756453af2e85e5944a8cc2e2c21aacc905.1708529736.git.u.kleine-koenig@pengutronix.de
|
|
When a PCI device is dynamically added, the kernel oopses with a NULL
pointer dereference:
BUG: Kernel NULL pointer dereference on read at 0x00000030
Faulting instruction address: 0xc0000000006bbe5c
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: rpadlpar_io rpaphp rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs xsk_diag bonding nft_compat nf_tables nfnetlink rfkill binfmt_misc dm_multipath rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_core_mod ib_umad ib_iser libiscsi scsi_transport_iscsi ib_ipoib rdma_cm iw_cm ib_cm mlx5_ib ib_uverbs ib_core pseries_rng drm drm_panel_orientation_quirks xfs libcrc32c mlx5_core mlxfw sd_mod t10_pi sg tls ibmvscsi ibmveth scsi_transport_srp vmx_crypto pseries_wdt psample dm_mirror dm_region_hash dm_log dm_mod fuse
CPU: 17 PID: 2685 Comm: drmgr Not tainted 6.7.0-203405+ #66
Hardware name: IBM,9080-HEX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_008) hv:phyp pSeries
NIP: c0000000006bbe5c LR: c000000000a13e68 CTR: c0000000000579f8
REGS: c00000009924f240 TRAP: 0300 Not tainted (6.7.0-203405+)
MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 24002220 XER: 20040006
CFAR: c000000000a13e64 DAR: 0000000000000030 DSISR: 40000000 IRQMASK: 0
...
NIP sysfs_add_link_to_group+0x34/0x94
LR iommu_device_link+0x5c/0x118
Call Trace:
iommu_init_device+0x26c/0x318 (unreliable)
iommu_device_link+0x5c/0x118
iommu_init_device+0xa8/0x318
iommu_probe_device+0xc0/0x134
iommu_bus_notifier+0x44/0x104
notifier_call_chain+0xb8/0x19c
blocking_notifier_call_chain+0x64/0x98
bus_notify+0x50/0x7c
device_add+0x640/0x918
pci_device_add+0x23c/0x298
of_create_pci_dev+0x400/0x884
of_scan_pci_dev+0x124/0x1b0
__of_scan_bus+0x78/0x18c
pcibios_scan_phb+0x2a4/0x3b0
init_phb_dynamic+0xb8/0x110
dlpar_add_slot+0x170/0x3b8 [rpadlpar_io]
add_slot_store.part.0+0xb4/0x130 [rpadlpar_io]
kobj_attr_store+0x2c/0x48
sysfs_kf_write+0x64/0x78
kernfs_fop_write_iter+0x1b0/0x290
vfs_write+0x350/0x4a0
ksys_write+0x84/0x140
system_call_exception+0x124/0x330
system_call_vectored_common+0x15c/0x2ec
Commit a940904443e4 ("powerpc/iommu: Add iommu_ops to report capabilities
and allow blocking domains") broke DLPAR add of PCI devices.
The above added iommu_device structure to pci_controller. During
system boot, PCI devices are discovered and this newly added iommu_device
structure is initialized by a call to iommu_device_register().
During DLPAR add of a PCI device, a new pci_controller structure is
allocated but there are no calls made to iommu_device_register()
interface.
Fix is to register the iommu device during DLPAR add as well.
Fixes: a940904443e4 ("powerpc/iommu: Add iommu_ops to report capabilities and allow blocking domains")
Signed-off-by: Gaurav Batra <gbatra@linux.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240215221833.4817-1-gbatra@linux.ibm.com
|
|
Since commit d492cc2573a0 ("driver core: device.h: make struct
bus_type a const *"), the driver core can properly handle constant
struct bus_type, move the ibmebus_bus_type variable to be a constant
structure as well, placing it into read-only memory which can not be
modified at runtime.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240212-bus_cleanup-powerpc2-v2-5-8441b3f77827@marliere.net
|
|
Since commit d492cc2573a0 ("driver core: device.h: make struct
bus_type a const *"), the driver core can properly handle constant
struct bus_type, move the vio_bus_type variable to be a constant
structure as well, placing it into read-only memory which can not be
modified at runtime.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240212-bus_cleanup-powerpc2-v2-2-8441b3f77827@marliere.net
|
|
In order to make the distinction of the vio_bus_type variable based on
CONFIG_PPC_SMLPAR more explicit, move the required structs into a new
ifdef block. This is needed in order to make vio_bus_type const and
because the distinction is made explicit, there is no need to set the
fields within the vio_cmo_sysfs_init function.
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240212-bus_cleanup-powerpc2-v2-1-8441b3f77827@marliere.net
|
|
powerVM hypervisor updates the VPA fields with stolen time data.
It currently reports enqueue_dispatch_tb and ready_enqueue_tb for
this purpose. In linux these two fields are used to report the stolen time.
The VPA fields are updated at the TB frequency. On powerPC its mostly
set at 512Mhz. Hence this needs a conversion to ns when reporting it
back as rest of the kernel timings are in ns. This conversion is already
handled in tb_to_ns function. So use that function to report accurate
stolen time.
Observed this issue and used an Capped Shared Processor LPAR(SPLPAR) to
simplify the experiments. In all these cases, 100% VP Load is run using
stress-ng workload. Values of stolen time is in percentages as reported
by mpstat. With the patch values are close to expected.
6.8.rc1 +Patch
12EC/12VP 0.0 0.0
12EC/24VP 25.7 50.2
12EC/36VP 37.3 69.2
12EC/48VP 38.5 78.3
Fixes: 0e8a63132800 ("powerpc/pseries: Implement CONFIG_PARAVIRT_TIME_ACCOUNTING")
Cc: stable@vger.kernel.org # v6.1+
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240213052635.231597-1-sshegde@linux.ibm.com
|
|
This reverts commit ed8b94f6e0acd652ce69bd69d678a0c769172df8.
Gaurav reported that there are still problems with the patch and it
should be reverted pending a fuller fix.
Link: https://lore.kernel.org/all/4f6fc1ac-7a76-4447-9d0e-f55c0be373f8@linux.ibm.com/
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
When a PCI device is dynamically added, the kernel oopses with a NULL
pointer dereference:
BUG: Kernel NULL pointer dereference on read at 0x00000030
Faulting instruction address: 0xc0000000006bbe5c
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: rpadlpar_io rpaphp rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs xsk_diag bonding nft_compat nf_tables nfnetlink rfkill binfmt_misc dm_multipath rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_core_mod ib_umad ib_iser libiscsi scsi_transport_iscsi ib_ipoib rdma_cm iw_cm ib_cm mlx5_ib ib_uverbs ib_core pseries_rng drm drm_panel_orientation_quirks xfs libcrc32c mlx5_core mlxfw sd_mod t10_pi sg tls ibmvscsi ibmveth scsi_transport_srp vmx_crypto pseries_wdt psample dm_mirror dm_region_hash dm_log dm_mod fuse
CPU: 17 PID: 2685 Comm: drmgr Not tainted 6.7.0-203405+ #66
Hardware name: IBM,9080-HEX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_008) hv:phyp pSeries
NIP: c0000000006bbe5c LR: c000000000a13e68 CTR: c0000000000579f8
REGS: c00000009924f240 TRAP: 0300 Not tainted (6.7.0-203405+)
MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 24002220 XER: 20040006
CFAR: c000000000a13e64 DAR: 0000000000000030 DSISR: 40000000 IRQMASK: 0
...
NIP sysfs_add_link_to_group+0x34/0x94
LR iommu_device_link+0x5c/0x118
Call Trace:
iommu_init_device+0x26c/0x318 (unreliable)
iommu_device_link+0x5c/0x118
iommu_init_device+0xa8/0x318
iommu_probe_device+0xc0/0x134
iommu_bus_notifier+0x44/0x104
notifier_call_chain+0xb8/0x19c
blocking_notifier_call_chain+0x64/0x98
bus_notify+0x50/0x7c
device_add+0x640/0x918
pci_device_add+0x23c/0x298
of_create_pci_dev+0x400/0x884
of_scan_pci_dev+0x124/0x1b0
__of_scan_bus+0x78/0x18c
pcibios_scan_phb+0x2a4/0x3b0
init_phb_dynamic+0xb8/0x110
dlpar_add_slot+0x170/0x3b8 [rpadlpar_io]
add_slot_store.part.0+0xb4/0x130 [rpadlpar_io]
kobj_attr_store+0x2c/0x48
sysfs_kf_write+0x64/0x78
kernfs_fop_write_iter+0x1b0/0x290
vfs_write+0x350/0x4a0
ksys_write+0x84/0x140
system_call_exception+0x124/0x330
system_call_vectored_common+0x15c/0x2ec
Commit a940904443e4 ("powerpc/iommu: Add iommu_ops to report capabilities
and allow blocking domains") broke DLPAR add of PCI devices.
The above added iommu_device structure to pci_controller. During
system boot, PCI devices are discovered and this newly added iommu_device
structure is initialized by a call to iommu_device_register().
During DLPAR add of a PCI device, a new pci_controller structure is
allocated but there are no calls made to iommu_device_register()
interface.
Fix is to register the iommu device during DLPAR add as well.
Fixes: a940904443e4 ("powerpc/iommu: Add iommu_ops to report capabilities and allow blocking domains")
Signed-off-by: Gaurav Batra <gbatra@linux.ibm.com>
[mpe: Trim oops and tweak some change log wording]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240122222407.39603-1-gbatra@linux.ibm.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH:
"Here is the big set of tty and serial driver changes for 6.8-rc1.
As usual, Jiri has a bunch of refactoring and cleanups for the tty
core and drivers in here, along with the usual set of rs485 updates
(someday this might work properly...)
Along with those, in here are changes for:
- sc16is7xx serial driver updates
- platform driver removal api updates
- amba-pl011 driver updates
- tty driver binding updates
- other small tty/serial driver updates and changes
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (197 commits)
serial: sc16is7xx: refactor EFR lock
serial: sc16is7xx: reorder code to remove prototype declarations
serial: sc16is7xx: refactor FIFO access functions to increase commonality
serial: sc16is7xx: drop unneeded MODULE_ALIAS
serial: sc16is7xx: replace hardcoded divisor value with BIT() macro
serial: sc16is7xx: add explicit return for some switch default cases
serial: sc16is7xx: add macro for max number of UART ports
serial: sc16is7xx: add driver name to struct uart_driver
serial: sc16is7xx: use i2c_get_match_data()
serial: sc16is7xx: use spi_get_device_match_data()
serial: sc16is7xx: use DECLARE_BITMAP for sc16is7xx_lines bitfield
serial: sc16is7xx: improve do/while loop in sc16is7xx_irq()
serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq()
serial: sc16is7xx: set safe default SPI clock frequency
serial: sc16is7xx: add check for unsupported SPI modes during probe
serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in case of probe error
serial: 8250_exar: Set missing rs485_supported flag
serial: omap: do not override settings for RS485 support
serial: core, imx: do not set RS485 enabled if it is not supported
serial: core: make sure RS485 cannot be enabled when it is not supported
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add initial support to recognise the HeXin C2000 processor.
- Add papr-vpd and papr-sysparm character device drivers for VPD &
sysparm retrieval, so userspace tools can be adapted to avoid doing
raw firmware calls from userspace.
- Sched domains optimisations for shared processor partitions on
P9/P10.
- A series of optimisations for KVM running as a nested HV under
PowerVM.
- Other small features and fixes.
Thanks to Aditya Gupta, Aneesh Kumar K.V, Arnd Bergmann, Christophe
Leroy, Colin Ian King, Dario Binacchi, David Heidelberg, Geoff Levand,
Gustavo A. R. Silva, Haoran Liu, Jordan Niethe, Kajol Jain, Kevin Hao,
Kunwu Chan, Li kunyu, Li zeming, Masahiro Yamada, Michal Suchánek,
Nathan Lynch, Naveen N Rao, Nicholas Piggin, Randy Dunlap, Sathvika
Vasireddy, Srikar Dronamraju, Stephen Rothwell, Vaibhav Jain, and
Zhao Ke.
* tag 'powerpc-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (96 commits)
powerpc/ps3_defconfig: Disable PPC64_BIG_ENDIAN_ELF_ABI_V2
powerpc/86xx: Drop unused CONFIG_MPC8610
powerpc/powernv: Add error handling to opal_prd_range_is_valid
selftests/powerpc: Fix spelling mistake "EACCESS" -> "EACCES"
powerpc/hvcall: Reorder Nestedv2 hcall opcodes
powerpc/ps3: Add missing set_freezable() for ps3_probe_thread()
powerpc/mpc83xx: Use wait_event_freezable() for freezable kthread
powerpc/mpc83xx: Add the missing set_freezable() for agent_thread_fn()
powerpc/fsl: Fix fsl,tmu-calibration to match the schema
powerpc/smp: Dynamically build Powerpc topology
powerpc/smp: Avoid asym packing within thread_group of a core
powerpc/smp: Add __ro_after_init attribute
powerpc/smp: Disable MC domain for shared processor
powerpc/smp: Enable Asym packing for cores on shared processor
powerpc/sched: Cleanup vcpu_is_preempted()
powerpc: add cpu_spec.cpu_features to vmcoreinfo
powerpc/imc-pmu: Add a null pointer check in update_events_in_group()
powerpc/powernv: Add a null pointer check in opal_powercap_init()
powerpc/powernv: Add a null pointer check in opal_event_init()
powerpc/powernv: Add a null pointer check to scom_debug_init_one()
...
|
|
The hypervisor returns migration failure if all VAS windows are not
closed. During pre-migration stage, vas_migration_handler() sets
migration_in_progress flag and closes all windows from the list.
The allocate VAS window routine checks the migration flag, setup
the window and then add it to the list. So there is possibility of
the migration handler missing the window that is still in the
process of setup.
t1: Allocate and open VAS t2: Migration event
window
lock vas_pseries_mutex
If migration_in_progress set
unlock vas_pseries_mutex
return
open window HCALL
unlock vas_pseries_mutex
Modify window HCALL lock vas_pseries_mutex
setup window migration_in_progress=true
Closes all windows from the list
// May miss windows that are
// not in the list
unlock vas_pseries_mutex
lock vas_pseries_mutex return
if nr_closed_windows == 0
// No DLPAR CPU or migration
add window to the list
// Window will be added to the
// list after the setup is completed
unlock vas_pseries_mutex
return
unlock vas_pseries_mutex
Close VAS window
// due to DLPAR CPU or migration
return -EBUSY
This patch resolves the issue with the following steps:
- Set the migration_in_progress flag without holding mutex.
- Introduce nr_open_wins_progress counter in VAS capabilities
struct
- This counter tracks the number of open windows are still in
progress
- The allocate setup window thread closes windows if the migration
is set and decrements nr_open_window_progress counter
- The migration handler waits for no in-progress open windows.
The code flow with the fix is as follows:
t1: Allocate and open VAS t2: Migration event
window
lock vas_pseries_mutex
If migration_in_progress set
unlock vas_pseries_mutex
return
open window HCALL
nr_open_wins_progress++
// Window opened, but not
// added to the list yet
unlock vas_pseries_mutex
Modify window HCALL migration_in_progress=true
setup window lock vas_pseries_mutex
Closes all windows from the list
While nr_open_wins_progress {
unlock vas_pseries_mutex
lock vas_pseries_mutex sleep
if nr_closed_windows == 0 // Wait if any open window in
or migration is not started // progress. The open window
// No DLPAR CPU or migration // thread closes the window without
add window to the list // adding to the list and return if
nr_open_wins_progress-- // the migration is in progress.
unlock vas_pseries_mutex
return
Close VAS window
nr_open_wins_progress--
unlock vas_pseries_mutex
return -EBUSY lock vas_pseries_mutex
}
unlock vas_pseries_mutex
return
Fixes: 37e6764895ef ("powerpc/pseries/vas: Add VAS migration handler")
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231125235104.3405008-1-haren@linux.ibm.com
|
|
Until now the papr_sysparm APIs have been kernel-internal. But user
space needs access to PAPR system parameters too. The only method
available to user space today to get or set system parameters is using
sys_rtas() and /dev/mem to pass RTAS-addressable buffers between user
space and firmware. This is incompatible with lockdown and should be
deprecated.
So provide an alternative ABI to user space in the form of a
/dev/papr-sysparm character device with just two ioctl commands (get
and set). The data payloads involved are small enough to fit in the
ioctl argument buffer, making the code relatively simple.
Exposing the system parameters through sysfs has been considered but
it would be too awkward:
* The kernel currently does not have to contain an exhaustive list of
defined system parameters. This is a convenient property to maintain
because we don't have to update the kernel whenever a new parameter
is added to PAPR. Exporting a named attribute in sysfs for each
parameter would negate this.
* Some system parameters are text-based and some are not.
* Retrieval of at least one system parameter requires input data,
which a simple read-oriented interface can't support.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231212-papr-sys_rtas-vs-lockdown-v6-11-e9eafd0c8c6c@linux.ibm.com
|
|
The ability to get and set system parameters will be exposed to user
space, so let's get a little more strict about malformed
papr_sysparm_buf objects.
* Create accessors for the length field of struct papr_sysparm_buf.
The length is always stored in MSB order and this is better than
spreading the necessary conversions all over.
* Reject attempts to submit invalid buffers to RTAS.
* Warn if RTAS returns a buffer with an invalid length, clamping the
returned length to a safe value that won't overrun the buffer.
These are meant as precautionary measures to mitigate both firmware
and kernel bugs in this area, should they arise, but I am not aware of
any.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231212-papr-sys_rtas-vs-lockdown-v6-10-e9eafd0c8c6c@linux.ibm.com
|
|
PowerVM LPARs may retrieve Vital Product Data (VPD) for system
components using the ibm,get-vpd RTAS function.
We can expose this to user space with a /dev/papr-vpd character
device, where the programming model is:
struct papr_location_code plc = { .str = "", }; /* obtain all VPD */
int devfd = open("/dev/papr-vpd", O_RDONLY);
int vpdfd = ioctl(devfd, PAPR_VPD_CREATE_HANDLE, &plc);
size_t size = lseek(vpdfd, 0, SEEK_END);
char *buf = malloc(size);
pread(devfd, buf, size, 0);
When a file descriptor is obtained from ioctl(PAPR_VPD_CREATE_HANDLE),
the file contains the result of a complete ibm,get-vpd sequence. The
file contents are immutable from the POV of user space. To get a new
view of the VPD, the client must create a new handle.
This design choice insulates user space from most of the complexities
that ibm,get-vpd brings:
* ibm,get-vpd must be called more than once to obtain complete
results.
* Only one ibm,get-vpd call sequence should be in progress at a time;
interleaved sequences will disrupt each other. Callers must have a
protocol for serializing their use of the function.
* A call sequence in progress may receive a "VPD changed, try again"
status, requiring the client to abandon the sequence and start
over.
The memory required for the VPD buffers seems acceptable, around 20KB
for all VPD on one of my systems. And the value of the
/rtas/ibm,vpd-size DT property (the estimated maximum size of VPD) is
consistently 300KB across various systems I've checked.
I've implemented support for this new ABI in the rtas_get_vpd()
function in librtas, which the vpdupdate command currently uses to
populate its VPD database. I've verified that an unmodified vpdupdate
binary generates an identical database when using a librtas.so that
prefers the new ABI.
Along with the papr-vpd.h header exposed to user space, this
introduces a common papr-miscdev.h uapi header to share a base ioctl
ID with similar drivers to come.
Tested-by: Michal Suchánek <msuchanek@suse.de>
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231212-papr-sys_rtas-vs-lockdown-v6-9-e9eafd0c8c6c@linux.ibm.com
|
|
Switch character types to u8 and sizes to size_t. To conform to
characters/sizes in the rest of the tty layer.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Amit Shah <amit@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: virtualization@lists.linux.dev
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20231206073712.17776-13-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When an add operation for multiple LMBs fails, there is currently
little indication from the kernel of what went wrong. Be a little more
verbose about error conditions in the add paths.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231114-pseries-memhp-fixes-v1-3-fb8f2bb7c557@linux.ibm.com
|
|
dlpar_memory_remove_by_index() may access beyond the bounds of the
drmem lmb array when the LMB lookup fails to match an entry with the
given DRC index. When the search fails, the cursor is left pointing to
&drmem_info->lmbs[drmem_info->n_lmbs], which is one element past the
last valid entry in the array. The debug message at the end of the
function then dereferences this pointer:
pr_debug("Failed to hot-remove memory at %llx\n",
lmb->base_addr);
This was found by inspection and confirmed with KASAN:
pseries-hotplug-mem: Attempting to hot-remove LMB, drc index 1234
==================================================================
BUG: KASAN: slab-out-of-bounds in dlpar_memory+0x298/0x1658
Read of size 8 at addr c000000364e97fd0 by task bash/949
dump_stack_lvl+0xa4/0xfc (unreliable)
print_report+0x214/0x63c
kasan_report+0x140/0x2e0
__asan_load8+0xa8/0xe0
dlpar_memory+0x298/0x1658
handle_dlpar_errorlog+0x130/0x1d0
dlpar_store+0x18c/0x3e0
kobj_attr_store+0x68/0xa0
sysfs_kf_write+0xc4/0x110
kernfs_fop_write_iter+0x26c/0x390
vfs_write+0x2d4/0x4e0
ksys_write+0xac/0x1a0
system_call_exception+0x268/0x530
system_call_vectored_common+0x15c/0x2ec
Allocated by task 1:
kasan_save_stack+0x48/0x80
kasan_set_track+0x34/0x50
kasan_save_alloc_info+0x34/0x50
__kasan_kmalloc+0xd0/0x120
__kmalloc+0x8c/0x320
kmalloc_array.constprop.0+0x48/0x5c
drmem_init+0x2a0/0x41c
do_one_initcall+0xe0/0x5c0
kernel_init_freeable+0x4ec/0x5a0
kernel_init+0x30/0x1e0
ret_from_kernel_user_thread+0x14/0x1c
The buggy address belongs to the object at c000000364e80000
which belongs to the cache kmalloc-128k of size 131072
The buggy address is located 0 bytes to the right of
allocated 98256-byte region [c000000364e80000, c000000364e97fd0)
==================================================================
pseries-hotplug-mem: Failed to hot-remove memory at 0
Log failed lookups with a separate message and dereference the
cursor only when it points to a valid entry.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: 51925fb3c5c9 ("powerpc/pseries: Implement memory hotplug remove in the kernel")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231114-pseries-memhp-fixes-v1-1-fb8f2bb7c557@linux.ibm.com
|
|
The rtas_read_config() and rtas_write_config() functions in
kernel/rtas_pci.c have external linkage and two users in arch/powerpc:
the rtas_pci code itself and the pseries platform's "enhanced error
handling" (EEH) support code.
The prototypes for these functions in asm/ppc-pci.h have until now
been guarded by CONFIG_EEH since the only external caller is the
pseries EEH code. However, this presumably has always generated
warnings when built with !CONFIG_EEH and -Wmissing-prototypes:
arch/powerpc/kernel/rtas_pci.c:46:5: error: no previous prototype for
function 'rtas_read_config' [-Werror,-Wmissing-prototypes]
46 | int rtas_read_config(struct pci_dn *pdn, int where,
int size, u32 *val)
arch/powerpc/kernel/rtas_pci.c:98:5: error: no previous prototype for
function 'rtas_write_config' [-Werror,-Wmissing-prototypes]
98 | int rtas_write_config(struct pci_dn *pdn, int where,
int size, u32 val)
The introduction of commit c6345dfa6e3e ("Makefile.extrawarn: turn on
missing-prototypes globally") forces the issue.
The efika and chrp platform code have (static) functions with the same
names but different signatures. We may as well eliminate the potential
for conflicts and confusion by renaming the globally visible versions
as their prototypes get moved out of the CONFIG_EEH-guarded region;
their current names are too generic anyway. Since they operate on
objects of the type 'struct pci_dn *', give them the slightly more
verbose prefix "rtas_pci_dn_" and fix up all the call sites.
Fixes: c6345dfa6e3e ("Makefile.extrawarn: turn on missing-prototypes globally")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/linuxppc-dev/CA+G9fYt0LLXtjSz+Hkf3Fhm-kf0ZQanrhUS+zVZGa3O+Wt2+vg@mail.gmail.com/
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231127-rtas-pci-rw-config-v1-1-385d29ace3df@linux.ibm.com
|
|
This is a pseries-specific function declaration that doesn't belong in
rtas.h. Move it to the pseries platform code and adjust
pseries/suspend.c accordingly.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231106-rtas-trivial-v1-5-61847655c51f@linux.ibm.com
|
|
>From a W=1 build:
>> arch/powerpc/platforms/pseries/rtas-work-area.c:189: warning: Function parameter or member 'limit' not
>> described in 'rtas_work_area_reserve_arena'
Add the missing description of the limit parameter.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309131221.Bm1pg96n-lkp@intel.com/
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231106-rtas-trivial-v1-1-61847655c51f@linux.ibm.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add support for KVM running as a nested hypervisor under development
versions of PowerVM, using the new PAPR nested virtualisation API
- Add support for the BPF prog pack allocator
- A rework of the non-server MMU handling to support execute-only on
all platforms
- Some optimisations & cleanups for the powerpc qspinlock code
- Various other small features and fixes
Thanks to Aboorva Devarajan, Aditya Gupta, Amit Machhiwal, Benjamin
Gray, Christophe Leroy, Dr. David Alan Gilbert, Gaurav Batra, Gautam
Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Joel Stanley,
Jordan Niethe, Julia Lawall, Kautuk Consul, Kuan-Wei Chiu, Michael
Neuling, Minjie Du, Muhammad Muzammil, Naveen N Rao, Nicholas Piggin,
Nick Child, Nysal Jan K.A, Peter Lafreniere, Rob Herring, Sachin Sant,
Sebastian Andrzej Siewior, Shrikanth Hegde, Srikar Dronamraju, Stanislav
Kinsburskii, Vaibhav Jain, Wang Yufen, Yang Yingliang, and Yuan Tan.
* tag 'powerpc-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (100 commits)
powerpc/vmcore: Add MMU information to vmcoreinfo
Revert "powerpc: add `cur_cpu_spec` symbol to vmcoreinfo"
powerpc/bpf: use bpf_jit_binary_pack_[alloc|finalize|free]
powerpc/bpf: rename powerpc64_jit_data to powerpc_jit_data
powerpc/bpf: implement bpf_arch_text_invalidate for bpf_prog_pack
powerpc/bpf: implement bpf_arch_text_copy
powerpc/code-patching: introduce patch_instructions()
powerpc/32s: Implement local_flush_tlb_page_psize()
powerpc/pseries: use kfree_sensitive() in plpks_gen_password()
powerpc/code-patching: Perform hwsync in __patch_instruction() in case of failure
powerpc/fsl_msi: Use device_get_match_data()
powerpc: Remove cpm_dp...() macros
powerpc/qspinlock: Rename yield_propagate_owner tunable
powerpc/qspinlock: Propagate sleepy if previous waiter is preempted
powerpc/qspinlock: don't propagate the not-sleepy state
powerpc/qspinlock: propagate owner preemptedness rather than CPU number
powerpc/qspinlock: stop queued waiters trying to set lock sleepy
powerpc/perf: Fix disabling BHRB and instruction sampling
powerpc/trace: Add support for HAVE_FUNCTION_ARG_ACCESS_API
powerpc/tools: Pass -mabi=elfv2 to gcc-check-mprofile-kernel.sh
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"To help make the move of sysctls out of kernel/sysctl.c not incur a
size penalty sysctl has been changed to allow us to not require the
sentinel, the final empty element on the sysctl array. Joel Granados
has been doing all this work. On the v6.6 kernel we got the major
infrastructure changes required to support this. For v6.7-rc1 we have
all arch/ and drivers/ modified to remove the sentinel. Both arch and
driver changes have been on linux-next for a bit less than a month. It
is worth re-iterating the value:
- this helps reduce the overall build time size of the kernel and run
time memory consumed by the kernel by about ~64 bytes per array
- the extra 64-byte penalty is no longer inncurred now when we move
sysctls out from kernel/sysctl.c to their own files
For v6.8-rc1 expect removal of all the sentinels and also then the
unneeded check for procname == NULL.
The last two patches are fixes recently merged by Krister Johansen
which allow us again to use softlockup_panic early on boot. This used
to work but the alias work broke it. This is useful for folks who want
to detect softlockups super early rather than wait and spend money on
cloud solutions with nothing but an eventual hung kernel. Although
this hadn't gone through linux-next it's also a stable fix, so we
might as well roll through the fixes now"
* tag 'sysctl-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (23 commits)
watchdog: move softlockup_panic back to early_param
proc: sysctl: prevent aliased sysctls from getting passed to init
intel drm: Remove now superfluous sentinel element from ctl_table array
Drivers: hv: Remove now superfluous sentinel element from ctl_table array
raid: Remove now superfluous sentinel element from ctl_table array
fw loader: Remove the now superfluous sentinel element from ctl_table array
sgi-xp: Remove the now superfluous sentinel element from ctl_table array
vrf: Remove the now superfluous sentinel element from ctl_table array
char-misc: Remove the now superfluous sentinel element from ctl_table array
infiniband: Remove the now superfluous sentinel element from ctl_table array
macintosh: Remove the now superfluous sentinel element from ctl_table array
parport: Remove the now superfluous sentinel element from ctl_table array
scsi: Remove now superfluous sentinel element from ctl_table array
tty: Remove now superfluous sentinel element from ctl_table array
xen: Remove now superfluous sentinel element from ctl_table array
hpet: Remove now superfluous sentinel element from ctl_table array
c-sky: Remove now superfluous sentinel element from ctl_talbe array
powerpc: Remove now superfluous sentinel element from ctl_table arrays
riscv: Remove now superfluous sentinel element from ctl_table array
x86/vdso: Remove now superfluous sentinel element from ctl_table array
...
|
|
Pull block updates from Jens Axboe:
- Improvements to the queue_rqs() support, and adding null_blk support
for that as well (Chengming)
- Series improving badblocks support (Coly)
- Key store support for sed-opal (Greg)
- IBM partition string handling improvements (Jan)
- Make number of ublk devices supported configurable (Mike)
- Cancelation improvements for ublk (Ming)
- MD pull requests via Song:
- Handle timeout in md-cluster, by Denis Plotnikov
- Cleanup pers->prepare_suspend, by Yu Kuai
- Rewrite mddev_suspend(), by Yu Kuai
- Simplify md_seq_ops, by Yu Kuai
- Reduce unnecessary locking array_state_store(), by Mariusz
Tkaczyk
- Make rdev add/remove independent from daemon thread, by Yu Kuai
- Refactor code around quiesce() and mddev_suspend(), by Yu Kuai
- NVMe pull request via Keith:
- nvme-auth updates (Mark)
- nvme-tcp tls (Hannes)
- nvme-fc annotaions (Kees)
- Misc cleanups and improvements (Jiapeng, Joel)
* tag 'for-6.7/block-2023-10-30' of git://git.kernel.dk/linux: (95 commits)
block: ublk_drv: Remove unused function
md: cleanup pers->prepare_suspend()
nvme-auth: allow mixing of secret and hash lengths
nvme-auth: use transformed key size to create resp
nvme-auth: alloc nvme_dhchap_key as single buffer
nvmet-tcp: use 'spin_lock_bh' for state_lock()
powerpc/pseries: PLPKS SED Opal keystore support
block: sed-opal: keystore access for SED Opal keys
block:sed-opal: SED Opal keystore
ublk: simplify aborting request
ublk: replace monitor with cancelable uring_cmd
ublk: quiesce request queue when aborting queue
ublk: rename mm_lock as lock
ublk: move ublk_cancel_dev() out of ub->mutex
ublk: make sure io cmd handled in submitter task context
ublk: don't get ublk device reference in ublk_abort_queue()
ublk: Make ublks_max configurable
ublk: Limit dev_id/ub_number values
md-cluster: check for timeout while a new disk adding
nvme: rework NVME_AUTH Kconfig selection
...
|
|
password might contain private information, so better use
kfree_sensitive to free it.
In plpks_gen_password() use kfree_sensitive().
Signed-off-by: Minjie Du <duminjie@vivo.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230717092648.9752-1-duminjie@vivo.com
|
|
If the vcpu_associativity alloc memory successfully but the
pcpu_associativity fails to alloc memory, the vcpu_associativity
memory leaks.
Fixes: d62c8deeb6e6 ("powerpc/pseries: Provide vcpu dispatch statistics")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Reviewed-by: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/1671003983-10794-1-git-send-email-wangyufen@huawei.com
|
|
The VAS open window call prints error message and returns -EBUSY
after the migration suspend event initiated and until the resume
event completed on the destination system. It can cause the log
buffer filled with these error messages if the user space issues
continuous open window calls. Similar case even for DLPAR CPU
remove event when no credits are available until the credits are
freed or with the other DLPAR CPU add event.
So changes in the patch to use pr_err_ratelimited() instead of
pr_err() to display open window failure and not-available credits
error messages.
Use pr_fmt() and make the corresponding changes to have the
consistencein prefix all pr_*() messages (vas-api.c).
Fixes: 37e6764895ef ("powerpc/pseries/vas: Add VAS migration handler")
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
[mpe: Use "vas-api" as the prefix to match the file name.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231019215033.1335251-1-haren@linux.ibm.com
|
|
SR-IOV device
When a device is initialized, the driver invokes dma_supported() twice -
first for streaming mappings followed by coherent mappings. For an
SR-IOV device, default window is deleted and DDW created. With vPMEM
enabled, TCE mappings are dynamically created for both vPMEM and SR-IOV
device. There are no direct mappings.
First time when dma_supported() is called with 64 bit mask, DDW is created
and marked as dynamic window. The second time dma_supported() is called,
enable_ddw() finds existing window for the device and incorrectly returns
it as "direct mapping".
This only happens when size of DDW is big enough to map max LPAR memory.
This results in streaming TCEs to not get dynamically mapped, since code
incorrently assumes these are already pre-mapped. The adapter initially
comes up but goes down due to EEH.
Fixes: 381ceda88c4c ("powerpc/pseries/iommu: Make use of DDW for indirect mapping")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Gaurav Batra <gbatra@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231003030802.47914-1-gbatra@linux.vnet.ibm.com
|
|
Sparse reports several endianness warnings on variables and functions
that are consistently treated as big endian. There are no
multi-endianness shenanigans going on here so fix these low hanging
fruit up in one patch.
All changes are just type annotations; no endianness switching
operations are introduced by this patch.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231011053711.93427-7-bgray@linux.ibm.com
|
|
Sparse reports several uses of 0 for pointer arguments and comparisons.
Replace with NULL to better convey the intent. Remove entirely if a
comparison to follow the kernel style of implicit boolean conversions.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231011053711.93427-5-bgray@linux.ibm.com
|
|
Define operations for SED Opal to read/write keys
from POWER LPAR Platform KeyStore(PLPKS). This allows
non-volatile storage of SED Opal keys.
Signed-off-by: Greg Joyce <gjoyce@linux.vnet.ibm.com>
Reviewed-by: Jonathan Derrick <jonathan.derrick@linux.dev>
Link: https://lore.kernel.org/r/20231004201957.1451669-4-gjoyce@linux.vnet.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
Remove sentinel from powersave_nap_ctl_table and nmi_wd_lpm_factor_ctl_table.
This removal is safe because register_sysctl implicitly uses ARRAY_SIZE()
in addition to checking for the sentinel.
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
In the plpar_hcall trace code, currently we use r0
to store the value of r4. But this value is not
used subsequently in the code. Hence remove this unused
save to r0 in plpar_hcall and plpar_hcall9
Suggested-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230929172337.7906-2-atrajeev@linux.vnet.ibm.com
|
|
In powerpc pseries system, below behaviour is observed while
enabling tracing on hcall:
# cd /sys/kernel/debug/tracing/
# cat events/powerpc/hcall_exit/enable
0
# echo 1 > events/powerpc/hcall_exit/enable
# ls
-bash: fork: Bad address
Above is from power9 lpar with latest kernel. Past this, softlockup
is observed. Initially while attempting via perf_event_open to
use "PERF_TYPE_TRACEPOINT", kernel panic was observed.
perf config used:
================
memset(&pe[1],0,sizeof(struct perf_event_attr));
pe[1].type=PERF_TYPE_TRACEPOINT;
pe[1].size=96;
pe[1].config=0x26ULL; /* 38 raw_syscalls/sys_exit */
pe[1].sample_type=0; /* 0 */
pe[1].read_format=PERF_FORMAT_TOTAL_TIME_ENABLED|PERF_FORMAT_TOTAL_TIME_RUNNING|PERF_FORMAT_ID|PERF_FORMAT_GROUP|0x10ULL; /* 1f */
pe[1].inherit=1;
pe[1].precise_ip=0; /* arbitrary skid */
pe[1].wakeup_events=0;
pe[1].bp_type=HW_BREAKPOINT_EMPTY;
pe[1].config1=0x1ULL;
Kernel panic logs:
==================
Kernel attempted to read user page (8) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x00000008
Faulting instruction address: 0xc0000000004c2814
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: nfnetlink bonding tls rfkill sunrpc dm_service_time dm_multipath pseries_rng xts vmx_crypto xfs libcrc32c sd_mod t10_pi crc64_rocksoft crc64 sg ibmvfc scsi_transport_fc ibmveth dm_mirror dm_region_hash dm_log dm_mod fuse
CPU: 0 PID: 1431 Comm: login Not tainted 6.4.0+ #1
Hardware name: IBM,8375-42A POWER9 (raw) 0x4e0202 0xf000005 of:IBM,FW950.30 (VL950_892) hv:phyp pSeries
NIP page_remove_rmap+0x44/0x320
LR wp_page_copy+0x384/0xec0
Call Trace:
0xc00000001416e400 (unreliable)
wp_page_copy+0x384/0xec0
__handle_mm_fault+0x9d4/0xfb0
handle_mm_fault+0xf0/0x350
___do_page_fault+0x48c/0xc90
hash__do_page_fault+0x30/0x70
do_hash_fault+0x1a4/0x330
data_access_common_virt+0x198/0x1f0
--- interrupt: 300 at 0x7fffae971abc
git bisect tracked this down to below commit:
'commit baa49d81a94b ("powerpc/pseries: hvcall stack frame overhead")'
This commit changed STACK_FRAME_OVERHEAD (112 ) to
STACK_FRAME_MIN_SIZE (32 ) since 32 bytes is the minimum size
for ELFv2 stack. With the latest kernel, when running on ELFv2,
STACK_FRAME_MIN_SIZE is used to allocate stack size.
During plpar_hcall_trace, first call is made to HCALL_INST_PRECALL
which saves the registers and allocates new stack frame. In the
plpar_hcall_trace code, STK_PARAM is accessed at two places.
1. To save r4: std r4,STK_PARAM(R4)(r1)
2. To access r4 back: ld r12,STK_PARAM(R4)(r1)
HCALL_INST_PRECALL precall allocates a new stack frame. So all
the stack parameter access after the precall, needs to be accessed
with +STACK_FRAME_MIN_SIZE. So the store instruction should be:
std r4,STACK_FRAME_MIN_SIZE+STK_PARAM(R4)(r1)
If the "std" is not updated with STACK_FRAME_MIN_SIZE, we will
end up with overwriting stack contents and cause corruption.
But instead of updating 'std', we can instead remove it since
HCALL_INST_PRECALL already saves it to the correct location.
similarly load instruction should be:
ld r12,STACK_FRAME_MIN_SIZE+STK_PARAM(R4)(r1)
Fix the load instruction to correctly access the stack parameter
with +STACK_FRAME_MIN_SIZE and remove the store of r4 since the
precall saves it correctly.
Cc: stable@vger.kernel.org # v6.2+
Fixes: baa49d81a94b ("powerpc/pseries: hvcall stack frame overhead")
Co-developed-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230929172337.7906-1-atrajeev@linux.vnet.ibm.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add HOTPLUG_SMT support (/sys/devices/system/cpu/smt) and honour the
configured SMT state when hotplugging CPUs into the system
- Combine final TLB flush and lazy TLB mm shootdown IPIs when using the
Radix MMU to avoid a broadcast TLBIE flush on exit
- Drop the exclusion between ptrace/perf watchpoints, and drop the now
unused associated arch hooks
- Add support for the "nohlt" command line option to disable CPU idle
- Add support for -fpatchable-function-entry for ftrace, with GCC >=
13.1
- Rework memory block size determination, and support 256MB size on
systems with GPUs that have hotpluggable memory
- Various other small features and fixes
Thanks to Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira
Rajeev, Benjamin Gray, Christophe Leroy, Frederic Barrat, Gautam
Menghani, Geoff Levand, Hari Bathini, Immad Mir, Jialin Zhang, Joel
Stanley, Jordan Niethe, Justin Stitt, Kajol Jain, Kees Cook, Krzysztof
Kozlowski, Laurent Dufour, Liang He, Linus Walleij, Mahesh Salgaonkar,
Masahiro Yamada, Michal Suchanek, Nageswara R Sastry, Nathan Chancellor,
Nathan Lynch, Naveen N Rao, Nicholas Piggin, Nick Desaulniers, Omar
Sandoval, Randy Dunlap, Reza Arbab, Rob Herring, Russell Currey, Sourabh
Jain, Thomas Gleixner, Trevor Woerner, Uwe Kleine-König, Vaibhav Jain,
Xiongfeng Wang, Yuan Tan, Zhang Rui, and Zheng Zengkai.
* tag 'powerpc-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (135 commits)
macintosh/ams: linux/platform_device.h is needed
powerpc/xmon: Reapply "Relax frame size for clang"
powerpc/mm/book3s64: Use 256M as the upper limit with coherent device memory attached
powerpc/mm/book3s64: Fix build error with SPARSEMEM disabled
powerpc/iommu: Fix notifiers being shared by PCI and VIO buses
powerpc/mpc5xxx: Add missing fwnode_handle_put()
powerpc/config: Disable SLAB_DEBUG_ON in skiroot
powerpc/pseries: Remove unused hcall tracing instruction
powerpc/pseries: Fix hcall tracepoints with JUMP_LABEL=n
powerpc: dts: add missing space before {
powerpc/eeh: Use pci_dev_id() to simplify the code
powerpc/64s: Move CPU -mtune options into Kconfig
powerpc/powermac: Fix unused function warning
powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT
powerpc: Don't include lppaca.h in paca.h
powerpc/pseries: Move hcall_vphn() prototype into vphn.h
powerpc/pseries: Move VPHN constants into vphn.h
cxl: Drop unused detach_spa()
powerpc: Drop zalloc_maybe_bootmem()
powerpc/powernv: Use struct opal_prd_msg in more places
...
|
|
When JUMP_LABEL=n, the tracepoint refcount test in the pre-call stores
the refcount value to the stack, so the same value can be used for the
post-call (presumably to avoid racing with the value concurrently
changing).
On little-endian (ELFv2) that might have just worked by luck, because
32(r1) is STK_PARAM(R3) there and so the value save gets clobbered by
the tracing code when it's non-zero, but fortunately r3 is the hcall
number and 0 is an invalid hcall number so it should get clobbered by
another non-zero value. In any case, commit cc1adb5f32557
("powerpc/pseries: Use jump labels for hcall tracepoints") removed the
code that actually used the value stored, so now it's just dead code.
It's fragile to be storing to the stack like this, and confusing. Better
remove it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230509091600.70994-2-npiggin@gmail.com
|
|
With JUMP_LABEL=n, hcall_tracepoint_refcount's address is being tested
instead of its value. This results in the tracing slowpath always being
taken unnecessarily.
Fixes: 9a10ccb29c0a2 ("powerpc/pseries: move hcall_tracepoint_refcount out of .toc")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230509091600.70994-1-npiggin@gmail.com
|
|
lppaca_shared_proc() takes a pointer to the lppaca which is typically
accessed through get_lppaca(). With DEBUG_PREEMPT enabled, this leads
to checking if preemption is enabled, for example:
BUG: using smp_processor_id() in preemptible [00000000] code: grep/10693
caller is lparcfg_data+0x408/0x19a0
CPU: 4 PID: 10693 Comm: grep Not tainted 6.5.0-rc3 #2
Call Trace:
dump_stack_lvl+0x154/0x200 (unreliable)
check_preemption_disabled+0x214/0x220
lparcfg_data+0x408/0x19a0
...
This isn't actually a problem however, as it does not matter which
lppaca is accessed, the shared proc state will be the same.
vcpudispatch_stats_procfs_init() already works around this by disabling
preemption, but the lparcfg code does not, erroring any time
/proc/powerpc/lparcfg is accessed with DEBUG_PREEMPT enabled.
Instead of disabling preemption on the caller side, rework
lppaca_shared_proc() to not take a pointer and instead directly access
the lppaca, bypassing any potential preemption checks.
Fixes: f13c13a00512 ("powerpc: Stop using non-architected shared_proc field in lppaca")
Signed-off-by: Russell Currey <ruscur@russell.cc>
[mpe: Rework to avoid needing a definition in paca.h and lppaca.h]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230823055317.751786-4-mpe@ellerman.id.au
|
|
These don't have any particularly good reason to belong in lppaca.h,
move them into their own header.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230823055317.751786-1-mpe@ellerman.id.au
|
|
Radix vmemmap mapping can map things correctly at the PMD level or PTE
level based on different device boundary checks. Hence we skip the
restrictions w.r.t vmemmap size to be multiple of PMD_SIZE. This also
makes the feature widely useful because to use PMD_SIZE vmemmap area we
require a memory block size of 2GiB
We can also use MHP_RESERVE_PAGES_MEMMAP_ON_MEMORY to that the feature can
work with a memory block size of 256MB. Using altmap.reserve feature to
align things correctly at pageblock granularity. We can end up losing
some pages in memory with this. For ex: with a 256MiB memory block size,
we require 4 pages to map vmemmap pages, In order to align things
correctly we end up adding a reserve of 28 pages. ie, for every 4096
pages 28 pages get reserved.
Link: https://lkml.kernel.org/r/20230808091501.287660-6-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Avoid redefining the same value in multiple source.
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230817162411.429-1-msuchanek@suse.de
|
|
Parse the device tree in early init to find the memory block size to be
used by the kernel. Consolidate the memory block size device tree parsing
to one helper and use that on both powernv and pseries. We still want to
use machine-specific callback because on all machine types other than
powernv and pseries we continue to return MIN_MEMORY_BLOCK_SIZE.
pseries_memory_block_size used to look for the second memory
block (memory@x) to determine the memory_block_size value. This patch
changed that to look at all memory blocks and make sure we can map them all
correctly using the computed memory block size value.
Add workaround to force 256MB memory block size if device driver managed
memory such as GPU memory is present. This helps to add GPU memory
that is not aligned to 1G.
Co-developed-by: Reza Arbab <arbab@linux.ibm.com>
Signed-off-by: Reza Arbab <arbab@linux.ibm.com>
Signed-off-by: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230801044447.11275-1-aneesh.kumar@linux.ibm.com
|
