| Age | Commit message (Collapse) | Author |
|---|
|
Move, rename, and merge the fpu and vx header files. This way fpu header
files have a consistent naming scheme (fpu*.h).
Also get rid of the fpu subdirectory and move header files to asm
directory, so that all fpu and vx header files can be found at the same
location.
Merge internal.h header file into other header files, since the internal
helpers are used at many locations. so those helper functions are really
not internal.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Address various checkpatch warnings, adjust whitespace, and try to increase
readability. This is just preparation, in order to avoid that subsequent
patches contain any distracting drive-by coding style changes.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Add machine variable capacity information to /proc/sysinfo.
- Limit the waste of page tables and always align vmalloc area size and
base address on segment boundary.
- Fix a memory leak when an attempt to register interruption sub class
(ISC) for the adjunct-processor (AP) guest failed.
- Reset response code AP_RESPONSE_INVALID_GISA to understandable by
guest AP_RESPONSE_INVALID_ADDRESS in response to a failed
interruption sub class (ISC) registration attempt.
- Improve reaction to adjunct-processor (AP)
AP_RESPONSE_OTHERWISE_CHANGED response code when enabling interrupts
on behalf of a guest.
- Fix incorrect sysfs 'status' attribute of adjunct-processor (AP)
queue device bound to the vfio_ap device driver when the mediated
device is attached to a guest, but the queue device is not passed
through.
- Rework struct ap_card to hold the whole adjunct-processor (AP) card
hardware information. As result, all the ugly bit checks are replaced
by simple evaluations of the required bit fields.
- Improve handling of some weird scenarios between service element (SE)
host and SE guest with adjunct-processor (AP) pass-through support.
- Change local_ctl_set_bit() and local_ctl_clear_bit() so they return
the previous value of the to be changed control register. This is
useful if a bit is only changed temporarily and the previous content
needs to be restored.
- The kernel starts with machine checks disabled and is expected to
enable it once trap_init() is called. However the implementation
allows machine checks early. Consistently enable it in trap_init()
only.
- local_mcck_disable() and local_mcck_enable() assume that machine
checks are always enabled. Instead implement and use
local_mcck_save() and local_mcck_restore() to disable machine checks
and restore the previous state.
- Modification of floating point control (FPC) register of a traced
process using ptrace interface may lead to corruption of the FPC
register of the tracing process. Fix this.
- kvm_arch_vcpu_ioctl_set_fpu() allows to set the floating point
control (FPC) register in vCPU, but may lead to corruption of the FPC
register of the host process. Fix this.
- Use READ_ONCE() to read a vCPU floating point register value from the
memory mapped area. This avoids that, depending on code generation, a
different value is tested for validity than the one that is used.
- Get rid of test_fp_ctl(), since it is quite subtle to use it
correctly. Instead copy a new floating point control register value
into its save area and test the validity of the new value when
loading it.
- Remove superfluous save_fpu_regs() call.
- Remove s390 support for ARCH_WANTS_DYNAMIC_TASK_STRUCT. All machines
provide the vector facility since many years and the need to make the
task structure size dependent on the vector facility does not exist.
- Remove the "novx" kernel command line option, as the vector code runs
without any problems since many years.
- Add the vector facility to the z13 architecture level set (ALS). All
hypervisors support the vector facility since many years. This allows
compile time optimizations of the kernel.
- Get rid of MACHINE_HAS_VX and replace it with cpu_has_vx(). As
result, the compiled code will have less runtime checks and less
code.
- Convert pgste_get_lock() and pgste_set_unlock() ASM inlines to C.
- Convert the struct subchannel spinlock from pointer to member.
* tag 's390-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (24 commits)
Revert "s390: update defconfigs"
s390/cio: make sch->lock spinlock pointer a member
s390: update defconfigs
s390/mm: convert pgste locking functions to C
s390/fpu: get rid of MACHINE_HAS_VX
s390/als: add vector facility to z13 architecture level set
s390/fpu: remove "novx" option
s390/fpu: remove ARCH_WANTS_DYNAMIC_TASK_STRUCT support
KVM: s390: remove superfluous save_fpu_regs() call
s390/fpu: get rid of test_fp_ctl()
KVM: s390: use READ_ONCE() to read fpc register value
KVM: s390: fix setting of fpc register
s390/ptrace: handle setting of fpc register correctly
s390/nmi: implement and use local_mcck_save() / local_mcck_restore()
s390/nmi: consistently enable machine checks in trap_init()
s390/ctlreg: return old register contents when changing bits
s390/ap: handle outband SE bind state change
s390/ap: store TAPQ hwinfo in struct ap_card
s390/vfio-ap: fix sysfs status attribute for AP queue devices
s390/vfio-ap: improve reaction to response code 07 from PQAP(AQIC) command
...
|
|
The KERNEL_FPR mask only contains a flag for the first eight vector
registers. However floating point registers overlay parts of the first
sixteen vector registers.
This could lead to vector register corruption if a kernel fpu context uses
any of the vector registers 8 to 15 and is interrupted or calls a
KERNEL_FPR context. If that context uses also vector registers 8 to 15,
their contents will be corrupted on return.
Luckily this is currently not a real bug, since the kernel has only one
KERNEL_FPR user with s390_adjust_jiffies() and it is only using floating
point registers 0 to 2.
Fix this by using the correct bits for KERNEL_FPR.
Fixes: 7f79695cc1b6 ("s390/fpu: improve kernel_fpu_[begin|end]")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Get rid of MACHINE_HAS_VX and replace it with cpu_has_vx() which is a
short readable wrapper for "test_facility(129)".
Facility bit 129 is set if the vector facility is present. test_facility()
returns also true for all bits which are set in the architecture level set
of the cpu that the kernel is compiled for. This means that
test_facility(129) is a compile time constant which returns true for z13
and later, since the vector facility bit is part of the z13 kernel ALS.
In result the compiled code will have less runtime checks, and less code.
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
It is quite subtle to use test_fp_ctl() correctly. Therefore remove it -
instead copy whatever new floating point control (fpc) register values are
supposed to be used into its save area.
Test the validity of the new value when loading it. If the new value is
invalid, load the fpc register with zero.
This seems to be a the best way to approach this problem. Even though this
changes behavior:
- sigreturn with an invalid fpc value on the stack will succeed, and
continue with zero value, instead of returning with SIGSEGV
- ptraced processes will also use a zero value instead of letting the
request fail with -EINVAL
However all of this seems to acceptable. After all testing of the value was
only implemented to avoid that user space can crash the kernel. It is not
there to test values for validity; and the assumption is that there is no
existing user space which is doing this.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Follow arm64 and riscv and move the EX_TABLE define to asm-extable.h
which is a lot less generic than the current linkage.h.
Also make sure that all files which contain EX_TABLE usages actually
include the new header file. This should make sure that the files
always compile and there won't be any random compile breakage due to
other header file dependencies.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
This patch converts s390 to use the generic entry infrastructure from
kernel/entry/*.
There are a few special things on s390:
- PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't
know about our PIF flags in exit_to_user_mode_loop().
- The old code had several ways to restart syscalls:
a) PIF_SYSCALL_RESTART, which was only set during execve to force a
restart after upgrading a process (usually qemu-kvm) to pgste page
table extensions.
b) PIF_SYSCALL, which is set by do_signal() to indicate that the
current syscall should be restarted. This is changed so that
do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use
PIF_SYSCALL doesn't work with the generic code, and changing it
to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART
more unique.
- On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by
executing a svc instruction on the process stack which causes a fault.
While handling that fault the fault code sets PIF_SYSCALL to hand over
processing to the syscall code on exit to usermode.
The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets
a return value for a syscall. The s390x ptrace ABI uses r2 both for the
syscall number and return value, so ptrace cannot set the syscall number +
return value at the same time. The flag makes handling that a bit easier.
do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET
is set.
CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY.
CR1/7/13 will be checked both on kernel entry and exit to contain the
correct asces.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In case of nested user of the FPU or vector registers in the kernel
the current code uses the mask of the FPU/vector registers of the
previous contexts to decide which registers to save and restore.
E.g. if the previous context used KERNEL_VXR_V0V7 and the next
context wants to use KERNEL_VXR_V24V31 the first 8 vector registers
are stored to the FPU state structure. But this is not necessary
as the next context does not use these registers.
Rework the FPU/vector register save and restore code. The new code
does a few things differently:
1) A lowcore field is used instead of a per-cpu variable.
2) The kernel_fpu_end function now has two parameters just like
kernel_fpu_begin. The register flags are required by both
functions to save / restore the minimal register set.
3) The inline functions kernel_fpu_begin/kernel_fpu_end now do the
update of the register masks. If the user space FPU registers
have already been stored neither save_fpu_regs nor the
__kernel_fpu_begin/__kernel_fpu_end functions have to be called
for the first context. In this case kernel_fpu_begin adds 7
instructions and kernel_fpu_end adds 4 instructions.
3) The inline assemblies in __kernel_fpu_begin / __kernel_fpu_end
to save / restore the vector registers are simplified a bit.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:
"There are a couple of new things for s390 with this merge request:
- a new scheduling domain "drawer" is added to reflect the unusual
topology found on z13 machines. Performance tests showed up to 8
percent gain with the additional domain.
- the new crc-32 checksum crypto module uses the vector-galois-field
multiply and sum SIMD instruction to speed up crc-32 and crc-32c.
- proper __ro_after_init support, this requires RO_AFTER_INIT_DATA in
the generic vmlinux.lds linker script definitions.
- kcov instrumentation support. A prerequisite for that is the
inline assembly basic block cleanup, which is the reason for the
net/iucv/iucv.c change.
- support for 2GB pages is added to the hugetlbfs backend.
Then there are two removals:
- the oprofile hardware sampling support is dead code and is removed.
The oprofile user space uses the perf interface nowadays.
- the ETR clock synchronization is removed, this has been superseeded
be the STP clock synchronization. And it always has been
"interesting" code..
And the usual bug fixes and cleanups"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (82 commits)
s390/pci: Delete an unnecessary check before the function call "pci_dev_put"
s390/smp: clean up a condition
s390/cio/chp : Remove deprecated create_singlethread_workqueue
s390/chsc: improve channel path descriptor determination
s390/chsc: sanitize fmt check for chp_desc determination
s390/cio: make fmt1 channel path descriptor optional
s390/chsc: fix ioctl CHSC_INFO_CU command
s390/cio/device_ops: fix kernel doc
s390/cio: allow to reset channel measurement block
s390/console: Make preferred console handling more consistent
s390/mm: fix gmap tlb flush issues
s390/mm: add support for 2GB hugepages
s390: have unique symbol for __switch_to address
s390/cpuinfo: show maximum thread id
s390/ptrace: clarify bits in the per_struct
s390: stack address vs thread_info
s390: remove pointless load within __switch_to
s390: enable kcov support
s390/cpumf: use basic block for ecctr inline assembly
s390/hypfs: use basic block for diag inline assembly
...
|
|
The test_fp_ctl function is used to test if a given value is a valid
floating-point control. The inline assembly in test_fp_ctl uses an
incorrect constraint for the 'orig_fpc' variable. If the compiler
chooses the same register for 'fpc' and 'orig_fpc' the test_fp_ctl()
function always returns true. This allows user space to trigger
kernel oopses with invalid floating-point control values on the
signal stack.
This problem has been introduced with git commit 4725c86055f5bbdcdf
"s390: fix save and restore of the floating-point-control register"
Cc: stable@vger.kernel.org # v3.13+
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Introduce the kernel_fpu_begin() and kernel_fpu_end() function
to enclose any in-kernel use of FPU instructions and registers.
In enclosed sections, you can perform floating-point or vector
(SIMD) computations. The functions take care of saving and
restoring FPU register contents and controls.
For usage details, see the guidelines in arch/s390/include/asm/fpu/api.h
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Split the API and FPU type definitions into separate header files
similar to "x86/fpu: Rename fpu-internal.h to fpu/internal.h" (78f7f1e54b).
The new header files and their meaning are:
asm/fpu/types.h:
FPU related data types, needed for 'struct thread_struct' and
'struct task_struct'.
asm/fpu/api.h:
FPU related 'public' functions for other subsystems and device
drivers.
asm/fpu/internal.h:
FPU internal functions mainly used to convert
FPU register contents in signal handling.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
