| Age | Commit message (Collapse) | Author |
|---|
|
Use flag output macros in inline asm to allow for better code generation if
the compiler has support for the flag output constraint.
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Replace all S390_lowcore usages in arch/s390/ by get_lowcore().
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The PMU for PAI NNPA counters enforces the following restriction:
- No per-task context for PAI sampling event NNPA_ALL
- No multiple system-wide PAI sampling event NNPA_ALL
Both restrictions are removed. One or more per-task sampling events
are supported. Also one or more system-wide sampling events are
supported.
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The PMU for PAI crypto counters enforces the following restriction:
- No per-task context for PAI crypto counters events.
This restriction is removed. One or more per-task/system-wide counting
events can now be active at the same time while at most one system
wide sampling event is active.
Example for per-task context of a PAI crypto counter event:
# perf stat -e pai_crypto/KM_AES_128/ -- true
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Adjust whitespace indentation. No functional change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
When the PAI events ALL_CRYPTO or ALL_NNPA are created
for system wide sampling, all PAI counters are monitored.
On each process schedule out, the values of all PAI counters
are investigated. Non-zero values are saved in the event's ring
buffer as raw data. This scheme expects the start value of each counter
to be reset to zero after each read operation performed by the PAI
PMU device driver. This allows for only one active event at any one
time as it relies on the start value of counters to be reset to zero.
Create a save area for each installed PAI XXXX_ALL event and save all
PAI counter values in this save area. Instead of clearing the
PAI counter lowcore area to zero after each read operation,
copy them from the lowcore area to the event's save area at process
schedule out time.
The delta of each PAI counter is calculated by subtracting the
old counter's value stored in the event's save area from the current
value stored in the lowcore area.
With this scheme, mulitple events of the PAI counters XXXX_ALL
can be handled at the same time. This will be addressed in a
follow-on patch.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Move enum definition to header file. This is done in preparation
for a follow on patch where this enum will be used in another source
file.
Also change the enum name from paiext_mode to paievt_mode
to indicate this enum is now used for several events.
Make naming consistent and rename PAI_MODE_COUNTER to PAI_MODE_COUNTING.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
PMU device driver perf_paiext supports Processor Activity
Instrumentation Extension (PAIE1), available with IBM z16:
- maps a 512 byte block to lowcore address 0x1508 called PAIE1 control
block.
- maps a 1024 byte block at PAIE1 control block entry with index 2.
- uses control register bit 14 to enable PAIE1 control block lookup.
- turn PAIE1 nnpa counting on and off by setting bit 63 in
PAIE1 control block entry with index 2.
- creates a sample with raw data on each context switch out when
at context switch some mapped counters have a value of nonzero.
This device driver only supports CPU wide context, no task context
is allowed.
Support for counting:
- one or more counters can be specified using
perf stat -e pai_ext/xxx/
where xxx stands for the counter event name. Multiple invocation
of this command is possible. The counter names are listed in
/sys/devices/pai_ext/events directory.
- one special counters can be specified using
perf stat -e pai_ext/NNPA_ALL/
which returns the sum of all incremented nnpa counters.
- multiple counting events can run in parallel.
Support for Sampling:
- one event pai_ext/NNPA_ALL/ is reserved for sampling.
The event collects data at context switch out and saves them in
the ring buffer.
- no multiple invocations are possible.
The PAIE1 nnpa counter events are system wide. No task context is
supported. Therefore some restrictions documented in function
paiext_busy() apply.
Extend qpaci assembly instruction to query supported memory mapped nnpa
counters. It returns the number of counters (no holes allowed in that
range).
PAIE1 nnpa counter events can not be created when a CPU hot plug
add is processed. This means a CPU hot plug add does not get
the necessary PAIE1 event to record PAIE1 nnpa counter increments
on the newly added CPU. CPU hot plug remove removes the event and
terminates the counting of PAIE1 counters immediately.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
PMU device driver perf_pai_crypto supports Processor Activity
Instrumentation (PAI), available with IBM z16:
- maps a full page to lowcore address 0x1500.
- uses CR0 bit 13 to turn PAI crypto counting on and off.
- creates a sample with raw data on each context switch out when
at context switch some mapped counters have a value of nonzero.
This device driver only supports CPU wide context, no task context
is allowed.
Support for counting:
- one or more counters can be specified using
perf stat -e pai_crypto/xxx/
where xxx stands for the counter event name. Multiple invocation
of this command is possible. The counter names are listed in
/sys/devices/pai_crypto/events directory.
- one special counters can be specified using
perf stat -e pai_crypto/CRYPTO_ALL/
which returns the sum of all incremented crypto counters.
- one event pai_crypto/CRYPTO_ALL/ is reserved for sampling.
No multiple invocations are possible. The event collects data at
context switch out and saves them in the ring buffer.
Add qpaci assembly instruction to query supported memory mapped crypto
counters. It returns the number of counters (no holes allowed in that
range).
The PAI crypto counter events are system wide and can not be executed
in parallel. Therefore some restrictions documented in function
paicrypt_busy apply.
In particular event CRYPTO_ALL for sampling must run exclusive.
Only counting events can run in parallel.
PAI crypto counter events can not be created when a CPU hot plug
add is processed. This means a CPU hot plug add does not get
the necessary PAI event to record PAI cryptography counter increments
on the newly added CPU. CPU hot plug remove removes the event and
terminates the counting of PAI counters immediately.
Co-developed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20220504062351.2954280-3-tmricht@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
