summaryrefslogtreecommitdiff
path: root/drivers/block
AgeCommit message (Collapse)Author
2019-12-15Merge tag 'for-linus-5.5b-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Two fixes: one for a resource accounting bug in some configurations and a fix for another patch which went into rc1" * tag 'for-linus-5.5b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: fix ballooned page accounting without hotplug enabled xen-blkback: prevent premature module unload
2019-12-13xen-blkback: prevent premature module unloadPaul Durrant
Objects allocated by xen_blkif_alloc come from the 'blkif_cache' kmem cache. This cache is destoyed when xen-blkif is unloaded so it is necessary to wait for the deferred free routine used for such objects to complete. This necessity was missed in commit 14855954f636 "xen-blkback: allow module to be cleanly unloaded". This patch fixes the problem by taking/releasing extra module references in xen_blkif_alloc/free() respectively. Signed-off-by: Paul Durrant <pdurrant@amazon.com> Reviewed-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-12-07Merge tag 'for-linus-5.5b-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull more xen updates from Juergen Gross: - a patch to fix a build warning - a cleanup of no longer needed code in the Xen event handling - a small series for the Xen grant driver avoiding high order allocations and replacing an insane global limit by a per-call one - a small series fixing Xen frontend/backend module referencing * tag 'for-linus-5.5b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen-blkback: allow module to be cleanly unloaded xen/xenbus: reference count registered modules xen/gntdev: switch from kcalloc() to kvcalloc() xen/gntdev: replace global limit of mapped pages by limit per call xen/gntdev: remove redundant non-zero check on ret xen/events: remove event handling recursion detection
2019-12-06Merge tag 'for-linus-20191205' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull more block and io_uring updates from Jens Axboe: "I wasn't expecting this to be so big, and if I was, I would have used separate branches for this. Going forward I'll be doing separate branches for the current tree, just like for the next kernel version tree. In any case, this contains: - Series from Christoph that fixes an inherent race condition with zoned devices and revalidation. - null_blk zone size fix (Damien) - Fix for a regression in this merge window that caused busy spins by sending empty disk uevents (Eric) - Fix for a regression in this merge window for bfq stats (Hou) - Fix for io_uring creds allocation failure handling (me) - io_uring -ERESTARTSYS send/recvmsg fix (me) - Series that fixes the need for applications to retain state across async request punts for io_uring. This one is a bit larger than I would have hoped, but I think it's important we get this fixed for 5.5. - connect(2) improvement for io_uring, handling EINPROGRESS instead of having applications needing to poll for it (me) - Have io_uring use a hash for poll requests instead of an rbtree. This turned out to work much better in practice, so I think we should make the switch now. For some workloads, even with a fair amount of cancellations, the insertion sort is just too expensive. (me) - Various little io_uring fixes (me, Jackie, Pavel, LimingWu) - Fix for brd unaligned IO, and a warning for the future (Ming) - Fix for a bio integrity data leak (Justin) - bvec_iter_advance() improvement (Pavel) - Xen blkback page unmap fix (SeongJae) The major items in here are all well tested, and on the liburing side we continue to add regression and feature test cases. We're up to 50 topic cases now, each with anywhere from 1 to more than 10 cases in each" * tag 'for-linus-20191205' of git://git.kernel.dk/linux-block: (33 commits) block: fix memleak of bio integrity data io_uring: fix a typo in a comment bfq-iosched: Ensure bio->bi_blkg is valid before using it io_uring: hook all linked requests via link_list io_uring: fix error handling in io_queue_link_head io_uring: use hash table for poll command lookups io-wq: clear node->next on list deletion io_uring: ensure deferred timeouts copy necessary data io_uring: allow IO_SQE_* flags on IORING_OP_TIMEOUT null_blk: remove unused variable warning on !CONFIG_BLK_DEV_ZONED brd: warn on un-aligned buffer brd: remove max_hw_sectors queue limit xen/blkback: Avoid unmapping unmapped grant pages io_uring: handle connect -EINPROGRESS like -EAGAIN block: set the zone size in blk_revalidate_disk_zones atomically block: don't handle bio based drivers in blk_revalidate_disk_zones block: allocate the zone bitmaps lazily block: replace seq_zones_bitmap with conv_zones_bitmap block: simplify blkdev_nr_zones block: remove the empty line at the end of blk-zoned.c ...
2019-12-05Merge tag 'ceph-for-5.5-rc1' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph updates from Ilya Dryomov: "The two highlights are a set of improvements to how rbd read-only mappings are handled and a conversion to the new mount API (slightly complicated by the fact that we had a common option parsing framework that called out into rbd and the filesystem instead of them calling into it). Also included a few scattered fixes and a MAINTAINERS update for rbd, adding Dongsheng as a reviewer" * tag 'ceph-for-5.5-rc1' of git://github.com/ceph/ceph-client: libceph, rbd, ceph: convert to use the new mount API rbd: ask for a weaker incompat mask for read-only mappings rbd: don't query snapshot features rbd: remove snapshot existence validation code rbd: don't establish watch for read-only mappings rbd: don't acquire exclusive lock for read-only mappings rbd: disallow read-write partitions on images mapped read-only rbd: treat images mapped read-only seriously rbd: introduce RBD_DEV_FLAG_READONLY rbd: introduce rbd_is_snap() ceph: don't leave ino field in ceph_mds_request_head uninitialized ceph: tone down loglevel on ceph_mdsc_build_path warning rbd: update MAINTAINERS info ceph: fix geting random mds from mdsmap rbd: fix spelling mistake "requeueing" -> "requeuing" ceph: make several helper accessors take const pointers libceph: drop unnecessary check from dispatch() in mon_client.c
2019-12-04null_blk: remove unused variable warning on !CONFIG_BLK_DEV_ZONEDJens Axboe
If BLK_DEV_ZONED isn't set, 'ret' isn't used. This makes gcc complain, rightfully. Move ret where it is used. Fixes: 979d54475e0b ("null_blk: cleanup null_gendisk_register") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-04brd: warn on un-aligned bufferMing Lei
Queue dma alignment limit requires users(fs, target, ...) of block layer to pass aligned buffer. So far brd doesn't support un-aligned buffer, even though it is easy to support it. However, given brd is often used for debug purpose, and there are other drivers which can't support un-aligned buffer too. So add warning so that brd users know what to fix. Reported-by: Stephen Rust <srust@blockbridge.com> Cc: Stephen Rust <srust@blockbridge.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-04brd: remove max_hw_sectors queue limitMing Lei
Now we depend on blk_queue_split() to respect most of queue limit (the only one exception could be dma alignment), however blk_queue_split() isn't used for brd, so this limit isn't respected since v4.3. Also max_hw_sectors limit doesn't play a big role for brd, which is added since brd is added to tree for unknown reason. So remove it. Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-04xen-blkback: allow module to be cleanly unloadedPaul Durrant
Add a module_exit() to perform the necessary clean-up. Signed-off-by: Paul Durrant <pdurrant@amazon.com> Reviewed-by: "Roger Pau Monné" <roger.pau@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-12-03xen/blkback: Avoid unmapping unmapped grant pagesSeongJae Park
For each I/O request, blkback first maps the foreign pages for the request to its local pages. If an allocation of a local page for the mapping fails, it should unmap every mapping already made for the request. However, blkback's handling mechanism for the allocation failure does not mark the remaining foreign pages as unmapped. Therefore, the unmap function merely tries to unmap every valid grant page for the request, including the pages not mapped due to the allocation failure. On a system that fails the allocation frequently, this problem leads to following kernel crash. [ 372.012538] BUG: unable to handle kernel NULL pointer dereference at 0000000000000001 [ 372.012546] IP: [<ffffffff814071ac>] gnttab_unmap_refs.part.7+0x1c/0x40 [ 372.012557] PGD 16f3e9067 PUD 16426e067 PMD 0 [ 372.012562] Oops: 0002 [#1] SMP [ 372.012566] Modules linked in: act_police sch_ingress cls_u32 ... [ 372.012746] Call Trace: [ 372.012752] [<ffffffff81407204>] gnttab_unmap_refs+0x34/0x40 [ 372.012759] [<ffffffffa0335ae3>] xen_blkbk_unmap+0x83/0x150 [xen_blkback] ... [ 372.012802] [<ffffffffa0336c50>] dispatch_rw_block_io+0x970/0x980 [xen_blkback] ... Decompressing Linux... Parsing ELF... done. Booting the kernel. [ 0.000000] Initializing cgroup subsys cpuset This commit fixes this problem by marking the grant pages of the given request that didn't mapped due to the allocation failure as invalid. Fixes: c6cc142dac52 ("xen-blkback: use balloon pages for all mappings") Reviewed-by: David Woodhouse <dwmw@amazon.de> Reviewed-by: Maximilian Heyne <mheyne@amazon.de> Reviewed-by: Paul Durrant <pdurrant@amazon.co.uk> Reviewed-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: SeongJae Park <sjpark@amazon.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-03block: set the zone size in blk_revalidate_disk_zones atomicallyChristoph Hellwig
The current zone revalidation code has a major problem in that it doesn't update the zone size and q->nr_zones atomically, leading to a short window where an out of bounds access to the zone arrays is possible. To fix this move the setting of the zone size into the crticial sections blk_revalidate_disk_zones so that it gets updated together with the zone bitmaps and q->nr_zones. This also slightly simplifies the caller as it deducts the zone size from the report_zones. This change also allows to check for a power of two zone size in generic code. Reported-by: Hans Holmberg <hans@owltronix.com> Reviewed-by: Javier González <javier@javigon.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-03block: don't handle bio based drivers in blk_revalidate_disk_zonesChristoph Hellwig
bio based drivers only need to update q->nr_zones. Do that manually instead of overloading blk_revalidate_disk_zones to keep that function simpler for the next round of changes that will rely even more on the request based functionality. Reviewed-by: Javier González <javier@javigon.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-03null_blk: cleanup null_gendisk_registerChristoph Hellwig
Use a saner size calculation, and do a trivial cleanup on the zone revalidation to prepare to future changes. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-03null_blk: fix zone size paramter checkDamien Le Moal
For zoned=1 mode, the zone size must be a power of 2. Check this not only when the zone size is specified during modprobe, but also when creating a zoned null_blk device using configfs. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-01Merge tag 'for-linus-20191129' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "I wasn't going to send this one off so soon, but unfortunately one of the fixes from the previous pull broke the build on some archs. So I'm sending this sooner rather than later. This contains: - Add highmem.h include for io_uring, because of the kmap() additions from last round. For some reason the build bot didn't spot this even though it sat for days. - Three minor ';' removals - Add support for the Beurer CD-on-a-chip device - Make io_uring work on MMU-less archs" * tag 'for-linus-20191129' of git://git.kernel.dk/linux-block: io_uring: fix missing kmap() declaration on powerpc ataflop: Remove unneeded semicolon block: sunvdc: Remove unneeded semicolon drbd: Remove unneeded semicolon io_uring: add mapping support for NOMMU archs sr_vendor: support Beurer GL50 evo CD-on-a-chip devices. cdrom: respect device capabilities during opening action
2019-12-01Merge tag 'compat-ioctl-5.5' of ↵Linus Torvalds
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann: "As part of the cleanup of some remaining y2038 issues, I came to fs/compat_ioctl.c, which still has a couple of commands that need support for time64_t. In completely unrelated work, I spent time on cleaning up parts of this file in the past, moving things out into drivers instead. After Al Viro reviewed an earlier version of this series and did a lot more of that cleanup, I decided to try to completely eliminate the rest of it and move it all into drivers. This series incorporates some of Al's work and many patches of my own, but in the end stops short of actually removing the last part, which is the scsi ioctl handlers. I have patches for those as well, but they need more testing or possibly a rewrite" * tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits) scsi: sd: enable compat ioctls for sed-opal pktcdvd: add compat_ioctl handler compat_ioctl: move SG_GET_REQUEST_TABLE handling compat_ioctl: ppp: move simple commands into ppp_generic.c compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic compat_ioctl: unify copy-in of ppp filters tty: handle compat PPP ioctls compat_ioctl: move SIOCOUTQ out of compat_ioctl.c compat_ioctl: handle SIOCOUTQNSD af_unix: add compat_ioctl support compat_ioctl: reimplement SG_IO handling compat_ioctl: move WDIOC handling into wdt drivers fs: compat_ioctl: move FITRIM emulation into file systems gfs2: add compat_ioctl support compat_ioctl: remove unused convert_in_user macro compat_ioctl: remove last RAID handling code compat_ioctl: remove /dev/raw ioctl translation compat_ioctl: remove PCI ioctl translation compat_ioctl: remove joystick ioctl translation ...
2019-11-28ataflop: Remove unneeded semicolonzhengbin
Fixes coccicheck warning: drivers/block/ataflop.c:860:53-54: Unneeded semicolon Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-28block: sunvdc: Remove unneeded semicolonzhengbin
Fixes coccicheck warning: drivers/block/sunvdc.c:637:2-3: Unneeded semicolon Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-28drbd: Remove unneeded semicolonzhengbin
Fixes coccicheck warning: drivers/block/drbd/drbd_req.c:887:2-3: Unneeded semicolon Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-27libceph, rbd, ceph: convert to use the new mount APIDavid Howells
Convert the ceph filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. [ Numerous string handling, leak and regression fixes; rbd conversion was particularly broken and had to be redone almost from scratch. ] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-11-25Merge tag 'printk-for-5.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk updates from Petr Mladek: - Allow to print symbolic error names via new %pe modifier. - Use pr_warn() instead of the remaining pr_warning() calls. Fix formatting of the related lines. - Add VSPRINTF entry to MAINTAINERS. * tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (32 commits) checkpatch: don't warn about new vsprintf pointer extension '%pe' MAINTAINERS: Add VSPRINTF tools lib api: Renaming pr_warning to pr_warn ASoC: samsung: Use pr_warn instead of pr_warning lib: cpu_rmap: Use pr_warn instead of pr_warning trace: Use pr_warn instead of pr_warning dma-debug: Use pr_warn instead of pr_warning vgacon: Use pr_warn instead of pr_warning fs: afs: Use pr_warn instead of pr_warning sh/intc: Use pr_warn instead of pr_warning scsi: Use pr_warn instead of pr_warning platform/x86: intel_oaktrail: Use pr_warn instead of pr_warning platform/x86: asus-laptop: Use pr_warn instead of pr_warning platform/x86: eeepc-laptop: Use pr_warn instead of pr_warning oprofile: Use pr_warn instead of pr_warning of: Use pr_warn instead of pr_warning macintosh: Use pr_warn instead of pr_warning idsn: Use pr_warn instead of pr_warning ide: Use pr_warn instead of pr_warning crypto: n2: Use pr_warn instead of pr_warning ...
2019-11-25Merge tag 'for-5.5/disk-revalidate-20191122' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull disk revalidation updates from Jens Axboe: "This continues the work that Jan Kara started to thoroughly cleanup and consolidate how we handle rescans and revalidations" * tag 'for-5.5/disk-revalidate-20191122' of git://git.kernel.dk/linux-block: block: move clearing bd_invalidated into check_disk_size_change block: remove (__)blkdev_reread_part as an exported API block: fix bdev_disk_changed for non-partitioned devices block: move rescan_partitions to fs/block_dev.c block: merge invalidate_partitions into rescan_partitions block: refactor rescan_partitions
2019-11-25Merge tag 'for-5.5/zoned-20191122' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull zoned block device update from Jens Axboe: "Enhancements and improvements to the zoned device support" * tag 'for-5.5/zoned-20191122' of git://git.kernel.dk/linux-block: scsi: sd_zbc: Remove set but not used variable 'buflen' block: rework zone reporting scsi: sd_zbc: Cleanup sd_zbc_alloc_report_buffer() null_blk: Add zone_nr_conv to features null_blk: clean up report zones null_blk: clean up the block device operations block: Remove partition support for zoned block devices block: Simplify report zones execution block: cleanup the !zoned case in blk_revalidate_disk_zones block: Enhance blk_revalidate_disk_zones()
2019-11-25Merge tag 'for-5.5/drivers-post-20191122' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull additional block driver updates from Jens Axboe: "Here's another block driver update, done to avoid conflicts with the zoned changes coming next. This contains: - Prepare SCSI sd for zone open/close/finish support - Small NVMe pull request - hwmon support (Akinobu) - add new co-maintainer (Christoph) - work-around for a discard issue on non-conformant drives (Eduard) - Small nbd leak fix" * tag 'for-5.5/drivers-post-20191122' of git://git.kernel.dk/linux-block: nbd: prevent memory leak nvme: hwmon: add quirk to avoid changing temperature threshold nvme: hwmon: provide temperature min and max values for each sensor nvmet: add another maintainer nvme: Discard workaround for non-conformant devices nvme: Add hardware monitoring support scsi: sd_zbc: add zone open, close, and finish support
2019-11-25Merge tag 'for-5.5/drivers-20191121' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block driver updates from Jens Axboe: "Here are the main block driver updates for 5.5. Nothing major in here, mostly just fixes. This contains: - a set of bcache changes via Coly - MD changes from Song - loop unmap write-zeroes fix (Darrick) - spelling fixes (Geert) - zoned additions cleanups to null_blk/dm (Ajay) - allow null_blk online submit queue changes (Bart) - NVMe changes via Keith, nothing major here either" * tag 'for-5.5/drivers-20191121' of git://git.kernel.dk/linux-block: (56 commits) Revert "bcache: fix fifo index swapping condition in journal_pin_cmp()" drivers/md/raid5-ppl.c: use the new spelling of RWH_WRITE_LIFE_NOT_SET drivers/md/raid5.c: use the new spelling of RWH_WRITE_LIFE_NOT_SET bcache: don't export symbols bcache: remove the extra cflags for request.o bcache: at least try to shrink 1 node in bch_mca_scan() bcache: add idle_max_writeback_rate sysfs interface bcache: add code comments in bch_btree_leaf_dirty() bcache: fix deadlock in bcache_allocator bcache: add code comment bch_keylist_pop() and bch_keylist_pop_front() bcache: deleted code comments for dead code in bch_data_insert_keys() bcache: add more accurate error messages in read_super() bcache: fix static checker warning in bcache_device_free() bcache: fix a lost wake-up problem caused by mca_cannibalize_lock bcache: fix fifo index swapping condition in journal_pin_cmp() md/raid10: prevent access of uninitialized resync_pages offset md: avoid invalid memory access for array sb->dev_roles md/raid1: avoid soft lockup under high load null_blk: add zone open, close, and finish support dm: add zone open, close and finish support ...
2019-11-25rbd: ask for a weaker incompat mask for read-only mappingsIlya Dryomov
For a read-only mapping, ask for a set of features that make the image only unwritable rather than both unreadable and unwritable by a client that doesn't understand them. As of today, the difference between them for krbd is journaling (JOURNALING) and live migration (MIGRATING). get_features method supports read_only parameter since hammer, ceph.git commit 6176ec5fde2a ("librbd: differentiate between R/O vs R/W RBD features"). Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jason Dillaman <dillaman@redhat.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
2019-11-25rbd: don't query snapshot featuresIlya Dryomov
Since infernalis, ceph.git commit 281f87f9ee52 ("cls_rbd: get_features on snapshots returns HEAD image features"), querying and checking that is pointless. Userspace support for manipulating image features after image creation came also in infernalis, so a snapshot with a different set of features wasn't ever possible. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jason Dillaman <dillaman@redhat.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
2019-11-25rbd: remove snapshot existence validation codeIlya Dryomov
RBD_DEV_FLAG_EXISTS check in rbd_queue_workfn() is racy and leads to inconsistent behaviour. If the object (or its snapshot) isn't there, the OSD returns ENOENT. A read submitted before the snapshot removal notification is processed would be zero-filled and ended with status OK, while future reads would be failed with IOERR. It also doesn't handle a case when an image that is mapped read-only is removed. On top of this, because watch is no longer established for read-only mappings, we no longer get notifications, so rbd_exists_validate() is effectively dead code. While failing requests rather than returning zeros is a good thing, RBD_DEV_FLAG_EXISTS is not it. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jason Dillaman <dillaman@redhat.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
2019-11-25rbd: don't establish watch for read-only mappingsIlya Dryomov
With exclusive lock out of the way, watch is the only thing left that prevents a read-only mapping from being used with read-only OSD caps. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jason Dillaman <dillaman@redhat.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
2019-11-25rbd: don't acquire exclusive lock for read-only mappingsIlya Dryomov
A read-only mapping should be usable with read-only OSD caps, so neither the header lock nor the object map lock can be acquired. Unfortunately, this means that images mapped read-only lose the advantage of the object map. Snapshots, however, can take advantage of the object map without any exclusionary locks, so if the object map is desired, snapshot the image and map the snapshot instead of the image. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jason Dillaman <dillaman@redhat.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
2019-11-25rbd: disallow read-write partitions on images mapped read-onlyIlya Dryomov
If an image is mapped read-only, don't allow setting its partition(s) to read-write via BLKROSET: with the previous patch all writes to such images are failed anyway. If an image is mapped read-write, its partition(s) can be set to read-only (and back to read-write) as before. Note that at the rbd level the image will remain writeable: anything sent down by the block layer will be executed, including any write from internal kernel users. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jason Dillaman <dillaman@redhat.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
2019-11-25rbd: treat images mapped read-only seriouslyIlya Dryomov
Even though -o ro/-o read_only/--read-only options are very old, we have never really treated them seriously (on par with snapshots). As a first step, fail writes to images mapped read-only just like we do for snapshots. We need this check in rbd because the block layer basically ignores read-only setting, see commit a32e236eb93e ("Partially revert "block: fail op_is_write() requests to read-only partitions""). Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jason Dillaman <dillaman@redhat.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
2019-11-25rbd: introduce RBD_DEV_FLAG_READONLYIlya Dryomov
rbd_dev->opts is not available for parent images, making checking rbd_dev->opts->read_only in various places (rbd_dev_image_probe(), need_exclusive_lock(), use_object_map() in the following patches) harder than it needs to be. Keeping rbd_dev_image_probe() in mind, move the initialization in do_rbd_add() up. snap_id isn't filled in at that point, so replace rbd_is_snap() with a snap_name comparison. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jason Dillaman <dillaman@redhat.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
2019-11-25rbd: introduce rbd_is_snap()Ilya Dryomov
Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jason Dillaman <dillaman@redhat.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
2019-11-25rbd: fix spelling mistake "requeueing" -> "requeuing"Colin Ian King
There is a spelling mistake in a debug message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-11-21Merge tag 'for-linus-20191121' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fix from Jens Axboe: "Just a single fix for an issue in nbd introduced in this cycle" * tag 'for-linus-20191121' of git://git.kernel.dk/linux-block: nbd:fix memory leak in nbd_get_socket()
2019-11-21nbd: prevent memory leakNavid Emamdoost
In nbd_add_socket when krealloc succeeds, if nsock's allocation fail the reallocted memory is leak. The correct behaviour should be assigning the reallocted memory to config->socks right after success. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-19nbd:fix memory leak in nbd_get_socket()Sun Ke
Before returning NULL, put the sock first. Cc: stable@vger.kernel.org Fixes: cf1b2326b734 ("nbd: verify socket is supported during setup") Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Sun Ke <sunke32@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-15Merge tag 'for-linus-20191115' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "A few fixes that should make it into this release. This contains: - io_uring: - The timeout command assumes sequence == 0 means that we want one completion, but this kind of overloading is unfortunate as it prevents users from doing a pure time based wait. Since this operation was introduced in this cycle, let's correct it now, while we can. (me) - One-liner to fix an issue with dependent links and fixed buffer reads. The actual IO completed fine, but the link got severed since we stored the wrong expected value. (me) - Add TIMEOUT to list of opcodes that don't need a file. (Pavel) - rsxx missing workqueue destry calls. Old bug. (Chuhong) - Fix blk-iocost active list check (Jiufei) - Fix impossible-to-hit overflow merge condition, that still hit some folks very rarely (Junichi) - Fix bfq hang issue from 5.3. This didn't get marked for stable, but will go into stable post this merge (Paolo)" * tag 'for-linus-20191115' of git://git.kernel.dk/linux-block: rsxx: add missed destroy_workqueue calls in remove iocost: check active_list of all the ancestors in iocg_activate() block, bfq: deschedule empty bfq_queues not referred by any process io_uring: ensure registered buffer import returns the IO length io_uring: Fix getting file for timeout block: check bi_size overflow before merge io_uring: make timeout sequence == 0 mean no sequence
2019-11-14rsxx: add missed destroy_workqueue calls in removeChuhong Yuan
The driver misses calling destroy_workqueue in remove like what is done when probe fails. Add the missed calls to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-14rbd: silence bogus uninitialized warning in rbd_object_map_update_finish()Ilya Dryomov
Some versions of gcc (so far 6.3 and 7.4) throw a warning: drivers/block/rbd.c: In function 'rbd_object_map_callback': drivers/block/rbd.c:2124:21: warning: 'current_state' may be used uninitialized in this function [-Wmaybe-uninitialized] (current_state == OBJECT_EXISTS && state == OBJECT_EXISTS_CLEAN)) drivers/block/rbd.c:2092:23: note: 'current_state' was declared here u8 state, new_state, current_state; ^~~~~~~~~~~~~ It's bogus because all current_state accesses are guarded by has_current_state. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
2019-11-14block: remove (__)blkdev_reread_part as an exported APIChristoph Hellwig
In general drivers should never mess with partition tables directly. Unfortunately s390 and loop do for somewhat historic reasons, but they can use bdev_disk_changed directly instead when we export it as they satisfy the sanity checks we have in __blkdev_reread_part. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> [dasd] Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-12block: rework zone reportingChristoph Hellwig
Avoid the need to allocate a potentially large array of struct blk_zone in the block layer by switching the ->report_zones method interface to a callback model. Now the caller simply supplies a callback that is executed on each reported zone, and private data for it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-12null_blk: Add zone_nr_conv to featuresDamien Le Moal
For a null_blk device with zoned mode enabled, the number of conventional zones can be configured through configfs with the zone_nr_conv parameter. Add this missing parameter in the features string. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-12null_blk: clean up report zonesChristoph Hellwig
Make the instance name match the method name and define the name to NULL instead of providing an inline stub, which is rather pointless for a method call. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-12null_blk: clean up the block device operationsChristoph Hellwig
Remove the pointless stub open and release methods, give the operations vector a slightly less confusing name, and use normal alignment for the assignment operators. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-12Merge branch 'for-5.5/drivers' into for-5.5/zonedJens Axboe
* for-5.5/drivers: (38 commits) null_blk: add zone open, close, and finish support dm: add zone open, close and finish support nvme: Fix parsing of ANA log page nvmet: stop using bio_set_op_attrs nvmet: add plugging for read/write when ns is bdev nvmet: clean up command parsing a bit nvme-pci: Spelling s/resdicovered/rediscovered/ nvmet: fill discovery controller sn, fr and mn correctly nvmet: Open code nvmet_req_execute() nvmet: Remove the data_len field from the nvmet_req struct nvmet: Introduce nvmet_dsm_len() helper nvmet: Cleanup discovery execute handlers nvmet: Introduce common execute function for get_log_page and identify nvmet-tcp: Don't set the request's data_len nvmet-tcp: Don't check data_len in nvmet_tcp_map_data() nvme: Introduce nvme_lba_to_sect() nvme: Cleanup and rename nvme_block_nr() nvme: resync include/linux/nvme.h with nvmecli nvme: move common call to nvme_cleanup_cmd to core layer nvme: introduce "Command Aborted By host" status code ...
2019-11-08block: drbd: remove a stray unlock in __drbd_send_protocol()Dan Carpenter
There are two callers of this function and they both unlock the mutex so this ends up being a double unlock. Fixes: 44ed167da748 ("drbd: rcu_read_lock() and rcu_dereference() for tconn->net_conf") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-07null_blk: add zone open, close, and finish supportAjay Joshi
Implement REQ_OP_ZONE_OPEN, REQ_OP_ZONE_CLOSE and REQ_OP_ZONE_FINISH support to allow explicit control of zone states. Contains contributions from Matias Bjorling, Hans Holmberg, Keith Busch and Damien Le Moal. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com> Signed-off-by: Matias Bjorling <matias.bjorling@wdc.com> Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-01loop: fix no-unmap write-zeroes request behaviorDarrick J. Wong
Currently, if the loop device receives a WRITE_ZEROES request, it asks the underlying filesystem to punch out the range. This behavior is correct if unmapping is allowed. However, a NOUNMAP request means that the caller doesn't want us to free the storage backing the range, so punching out the range is incorrect behavior. To satisfy a NOUNMAP | WRITE_ZEROES request, loop should ask the underlying filesystem to FALLOC_FL_ZERO_RANGE, which is (according to the fallocate documentation) required to ensure that the entire range is backed by real storage, which suffices for our purposes. Fixes: 19372e2769179dd ("loop: implement REQ_OP_WRITE_ZEROES") Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>