| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "Add folio_mk_pte()" from Matthew Wilcox simplifies the act of
creating a pte which addresses the first page in a folio and reduces
the amount of plumbing which architecture must implement to provide
this.
- "Misc folio patches for 6.16" from Matthew Wilcox is a shower of
largely unrelated folio infrastructure changes which clean things up
and better prepare us for future work.
- "memory,x86,acpi: hotplug memory alignment advisement" from Gregory
Price adds early-init code to prevent x86 from leaving physical
memory unused when physical address regions are not aligned to memory
block size.
- "mm/compaction: allow more aggressive proactive compaction" from
Michal Clapinski provides some tuning of the (sadly, hard-coded (more
sadly, not auto-tuned)) thresholds for our invokation of proactive
compaction. In a simple test case, the reduction of a guest VM's
memory consumption was dramatic.
- "Minor cleanups and improvements to swap freeing code" from Kemeng
Shi provides some code cleaups and a small efficiency improvement to
this part of our swap handling code.
- "ptrace: introduce PTRACE_SET_SYSCALL_INFO API" from Dmitry Levin
adds the ability for a ptracer to modify syscalls arguments. At this
time we can alter only "system call information that are used by
strace system call tampering, namely, syscall number, syscall
arguments, and syscall return value.
This series should have been incorporated into mm.git's "non-MM"
branch, but I goofed.
- "fs/proc: extend the PAGEMAP_SCAN ioctl to report guard regions" from
Andrei Vagin extends the info returned by the PAGEMAP_SCAN ioctl
against /proc/pid/pagemap. This permits CRIU to more efficiently get
at the info about guard regions.
- "Fix parameter passed to page_mapcount_is_type()" from Gavin Shan
implements that fix. No runtime effect is expected because
validate_page_before_insert() happens to fix up this error.
- "kernel/events/uprobes: uprobe_write_opcode() rewrite" from David
Hildenbrand basically brings uprobe text poking into the current
decade. Remove a bunch of hand-rolled implementation in favor of
using more current facilities.
- "mm/ptdump: Drop assumption that pxd_val() is u64" from Anshuman
Khandual provides enhancements and generalizations to the pte dumping
code. This might be needed when 128-bit Page Table Descriptors are
enabled for ARM.
- "Always call constructor for kernel page tables" from Kevin Brodsky
ensures that the ctor/dtor is always called for kernel pgtables, as
it already is for user pgtables.
This permits the addition of more functionality such as "insert hooks
to protect page tables". This change does result in various
architectures performing unnecesary work, but this is fixed up where
it is anticipated to occur.
- "Rust support for mm_struct, vm_area_struct, and mmap" from Alice
Ryhl adds plumbing to permit Rust access to core MM structures.
- "fix incorrectly disallowed anonymous VMA merges" from Lorenzo
Stoakes takes advantage of some VMA merging opportunities which we've
been missing for 15 years.
- "mm/madvise: batch tlb flushes for MADV_DONTNEED and MADV_FREE" from
SeongJae Park optimizes process_madvise()'s TLB flushing.
Instead of flushing each address range in the provided iovec, we
batch the flushing across all the iovec entries. The syscall's cost
was approximately halved with a microbenchmark which was designed to
load this particular operation.
- "Track node vacancy to reduce worst case allocation counts" from
Sidhartha Kumar makes the maple tree smarter about its node
preallocation.
stress-ng mmap performance increased by single-digit percentages and
the amount of unnecessarily preallocated memory was dramaticelly
reduced.
- "mm/gup: Minor fix, cleanup and improvements" from Baoquan He removes
a few unnecessary things which Baoquan noted when reading the code.
- ""Enhance sysfs handling for memory hotplug in weighted interleave"
from Rakie Kim "enhances the weighted interleave policy in the memory
management subsystem by improving sysfs handling, fixing memory
leaks, and introducing dynamic sysfs updates for memory hotplug
support". Fixes things on error paths which we are unlikely to hit.
- "mm/damon: auto-tune DAMOS for NUMA setups including tiered memory"
from SeongJae Park introduces new DAMOS quota goal metrics which
eliminate the manual tuning which is required when utilizing DAMON
for memory tiering.
- "mm/vmalloc.c: code cleanup and improvements" from Baoquan He
provides cleanups and small efficiency improvements which Baoquan
found via code inspection.
- "vmscan: enforce mems_effective during demotion" from Gregory Price
changes reclaim to respect cpuset.mems_effective during demotion when
possible. because presently, reclaim explicitly ignores
cpuset.mems_effective when demoting, which may cause the cpuset
settings to violated.
This is useful for isolating workloads on a multi-tenant system from
certain classes of memory more consistently.
- "Clean up split_huge_pmd_locked() and remove unnecessary folio
pointers" from Gavin Guo provides minor cleanups and efficiency gains
in in the huge page splitting and migrating code.
- "Use kmem_cache for memcg alloc" from Huan Yang creates a slab cache
for `struct mem_cgroup', yielding improved memory utilization.
- "add max arg to swappiness in memory.reclaim and lru_gen" from
Zhongkun He adds a new "max" argument to the "swappiness=" argument
for memory.reclaim MGLRU's lru_gen.
This directs proactive reclaim to reclaim from only anon folios
rather than file-backed folios.
- "kexec: introduce Kexec HandOver (KHO)" from Mike Rapoport is the
first step on the path to permitting the kernel to maintain existing
VMs while replacing the host kernel via file-based kexec. At this
time only memblock's reserve_mem is preserved.
- "mm: Introduce for_each_valid_pfn()" from David Woodhouse provides
and uses a smarter way of looping over a pfn range. By skipping
ranges of invalid pfns.
- "sched/numa: Skip VMA scanning on memory pinned to one NUMA node via
cpuset.mems" from Libo Chen removes a lot of pointless VMA scanning
when a task is pinned a single NUMA mode.
Dramatic performance benefits were seen in some real world cases.
- "JFS: Implement migrate_folio for jfs_metapage_aops" from Shivank
Garg addresses a warning which occurs during memory compaction when
using JFS.
- "move all VMA allocation, freeing and duplication logic to mm" from
Lorenzo Stoakes moves some VMA code from kernel/fork.c into the more
appropriate mm/vma.c.
- "mm, swap: clean up swap cache mapping helper" from Kairui Song
provides code consolidation and cleanups related to the folio_index()
function.
- "mm/gup: Cleanup memfd_pin_folios()" from Vishal Moola does that.
- "memcg: Fix test_memcg_min/low test failures" from Waiman Long
addresses some bogus failures which are being reported by the
test_memcontrol selftest.
- "eliminate mmap() retry merge, add .mmap_prepare hook" from Lorenzo
Stoakes commences the deprecation of file_operations.mmap() in favor
of the new file_operations.mmap_prepare().
The latter is more restrictive and prevents drivers from messing with
things in ways which, amongst other problems, may defeat VMA merging.
- "memcg: decouple memcg and objcg stocks"" from Shakeel Butt decouples
the per-cpu memcg charge cache from the objcg's one.
This is a step along the way to making memcg and objcg charging
NMI-safe, which is a BPF requirement.
- "mm/damon: minor fixups and improvements for code, tests, and
documents" from SeongJae Park is yet another batch of miscellaneous
DAMON changes. Fix and improve minor problems in code, tests and
documents.
- "memcg: make memcg stats irq safe" from Shakeel Butt converts memcg
stats to be irq safe. Another step along the way to making memcg
charging and stats updates NMI-safe, a BPF requirement.
- "Let unmap_hugepage_range() and several related functions take folio
instead of page" from Fan Ni provides folio conversions in the
hugetlb code.
* tag 'mm-stable-2025-05-31-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (285 commits)
mm: pcp: increase pcp->free_count threshold to trigger free_high
mm/hugetlb: convert use of struct page to folio in __unmap_hugepage_range()
mm/hugetlb: refactor __unmap_hugepage_range() to take folio instead of page
mm/hugetlb: refactor unmap_hugepage_range() to take folio instead of page
mm/hugetlb: pass folio instead of page to unmap_ref_private()
memcg: objcg stock trylock without irq disabling
memcg: no stock lock for cpu hot-unplug
memcg: make __mod_memcg_lruvec_state re-entrant safe against irqs
memcg: make count_memcg_events re-entrant safe against irqs
memcg: make mod_memcg_state re-entrant safe against irqs
memcg: move preempt disable to callers of memcg_rstat_updated
memcg: memcg_rstat_updated re-entrant safe against irqs
mm: khugepaged: decouple SHMEM and file folios' collapse
selftests/eventfd: correct test name and improve messages
alloc_tag: check mem_profiling_support in alloc_tag_init
Docs/damon: update titles and brief introductions to explain DAMOS
selftests/damon/_damon_sysfs: read tried regions directories in order
mm/damon/tests/core-kunit: add a test for damos_set_filters_default_reject()
mm/damon/paddr: remove unused variable, folio_list, in damon_pa_stat()
mm/damon/sysfs-schemes: fix wrong comment on damons_sysfs_quota_goal_metric_strs
...
|
|
Pull block updates from Jens Axboe:
- ublk updates:
- Add support for updating the size of a ublk instance
- Zero-copy improvements
- Auto-registering of buffers for zero-copy
- Series simplifying and improving GET_DATA and request lookup
- Series adding quiesce support
- Lots of selftests additions
- Various cleanups
- NVMe updates via Christoph:
- add per-node DMA pools and use them for PRP/SGL allocations
(Caleb Sander Mateos, Keith Busch)
- nvme-fcloop refcounting fixes (Daniel Wagner)
- support delayed removal of the multipath node and optionally
support the multipath node for private namespaces (Nilay Shroff)
- support shared CQs in the PCI endpoint target code (Wilfred
Mallawa)
- support admin-queue only authentication (Hannes Reinecke)
- use the crc32c library instead of the crypto API (Eric Biggers)
- misc cleanups (Christoph Hellwig, Marcelo Moreira, Hannes
Reinecke, Leon Romanovsky, Gustavo A. R. Silva)
- MD updates via Yu:
- Fix that normal IO can be starved by sync IO, found by mkfs on
newly created large raid5, with some clean up patches for bdev
inflight counters
- Clean up brd, getting rid of atomic kmaps and bvec poking
- Add loop driver specifically for zoned IO testing
- Eliminate blk-rq-qos calls with a static key, if not enabled
- Improve hctx locking for when a plug has IO for multiple queues
pending
- Remove block layer bouncing support, which in turn means we can
remove the per-node bounce stat as well
- Improve blk-throttle support
- Improve delay support for blk-throttle
- Improve brd discard support
- Unify IO scheduler switching. This should also fix a bunch of lockdep
warnings we've been seeing, after enabling lockdep support for queue
freezing/unfreezeing
- Add support for block write streams via FDP (flexible data placement)
on NVMe
- Add a bunch of block helpers, facilitating the removal of a bunch of
duplicated boilerplate code
- Remove obsolete BLK_MQ pci and virtio Kconfig options
- Add atomic/untorn write support to blktrace
- Various little cleanups and fixes
* tag 'for-6.16/block-20250523' of git://git.kernel.dk/linux: (186 commits)
selftests: ublk: add test for UBLK_F_QUIESCE
ublk: add feature UBLK_F_QUIESCE
selftests: ublk: add test case for UBLK_U_CMD_UPDATE_SIZE
traceevent/block: Add REQ_ATOMIC flag to block trace events
ublk: run auto buf unregisgering in same io_ring_ctx with registering
io_uring: add helper io_uring_cmd_ctx_handle()
ublk: remove io argument from ublk_auto_buf_reg_fallback()
ublk: handle ublk_set_auto_buf_reg() failure correctly in ublk_fetch()
selftests: ublk: add test for covering UBLK_AUTO_BUF_REG_FALLBACK
selftests: ublk: support UBLK_F_AUTO_BUF_REG
ublk: support UBLK_AUTO_BUF_REG_FALLBACK
ublk: register buffer to local io_uring with provided buf index via UBLK_F_AUTO_BUF_REG
ublk: prepare for supporting to register request buffer automatically
ublk: convert to refcount_t
selftests: ublk: make IO & device removal test more stressful
nvme: rename nvme_mpath_shutdown_disk to nvme_mpath_remove_disk
nvme: introduce multipath_always_on module param
nvme-multipath: introduce delayed removal of the multipath head node
nvme-pci: derive and better document max segments limits
nvme-pci: use struct_size for allocation struct nvme_dev
...
|
|
Add feature UBLK_F_QUIESCE, which adds control command `UBLK_U_CMD_QUIESCE_DEV`
for quiescing device, then device state can become `UBLK_S_DEV_QUIESCED`
or `UBLK_S_DEV_FAIL_IO` finally from ublk_ch_release() with ublk server
cooperation.
This feature can help to support to upgrade ublk server application by
shutting down ublk server gracefully, meantime keep ublk block device
persistent during the upgrading period.
The feature is only available for UBLK_F_USER_RECOVERY.
Suggested-by: Yoav Cohen <yoav@nvidia.com>
Link: https://lore.kernel.org/linux-block/DM4PR12MB632807AB7CDCE77D1E5AB7D0A9B92@DM4PR12MB6328.namprd12.prod.outlook.com/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250522163523.406289-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block fixes from Jens Axboe:
- Fix for a regression with setting up loop on a file system
without ->write_iter()
- Fix for an nvme sysfs regression
* tag 'block-6.15-20250522' of git://git.kernel.dk/linux:
nvme: avoid creating multipath sysfs group under namespace path devices
loop: don't require ->write_iter for writable files in loop_configure
|
|
UBLK_F_AUTO_BUF_REG requires that the buffer registered automatically
is unregistered in same `io_ring_ctx`, so check it explicitly.
Document this requirement for UBLK_F_AUTO_BUF_REG.
Drop WARN_ON_ONCE() which is triggered from userspace code path.
Fixes: 99c1e4eb6a3f ("ublk: register buffer to local io_uring with provided buf index via UBLK_F_AUTO_BUF_REG")
Reported-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250522152043.399824-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The argument has been unused since the function was added, so remove it.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250521160720.1893326-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If ublk_set_auto_buf_reg() fails, we need to unlock and return,
otherwise `ub->mutex` is leaked.
Fixes: 99c1e4eb6a3f ("ublk: register buffer to local io_uring with provided buf index via UBLK_F_AUTO_BUF_REG")
Reported-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250521025502.71041-2-ming.lei@redhat.com
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For UBLK_F_AUTO_BUF_REG, buffer is registered to uring_cmd context
automatically with the provided buffer index. User may provide one wrong
buffer index, or the specified buffer is registered by application already.
Add UBLK_AUTO_BUF_REG_FALLBACK for supporting to auto buffer registering
fallback by completing the uring_cmd and telling ublk server the
register failure via UBLK_AUTO_BUF_REG_FALLBACK, then ublk server still
can register the buffer from userspace.
So we can provide reliable way for supporting auto buffer register.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250520045455.515691-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
UBLK_F_AUTO_BUF_REG
Add UBLK_F_AUTO_BUF_REG for supporting to register buffer automatically
to local io_uring context with provided buffer index.
Add UAPI structure `struct ublk_auto_buf_reg` for holding user parameter
to register request buffer automatically, one 'flags' field is defined, and
there is still 32bit available for future extension, such as, adding one
io_ring FD field for registering buffer to external io_uring.
`struct ublk_auto_buf_reg` is populated from ublk uring_cmd's sqe->addr,
and all existing ublk commands are data-less, so it is just fine to reuse
sqe->addr for this purpose.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250520045455.515691-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
UBLK_F_SUPPORT_ZERO_COPY requires ublk server to issue explicit buffer
register/unregister uring_cmd for each IO, this way is not only inefficient,
but also introduce dependency between buffer consumer and buffer register/
unregister uring_cmd, please see tools/testing/selftests/ublk/stripe.c
in which backing file IO has to be issued one by one by IOSQE_IO_LINK.
Prepare for adding feature UBLK_F_AUTO_BUF_REG for addressing the existing
zero copy limitation:
- register request buffer automatically to ublk uring_cmd's io_uring
context before delivering io command to ublk server
- unregister request buffer automatically from the ublk uring_cmd's
io_uring context when completing the request
- io_uring will unregister the buffer automatically when uring is
exiting, so we needn't worry about accident exit
For using this feature, ublk server has to create one sparse buffer table
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250520045455.515691-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Convert to refcount_t and prepare for supporting to register bvec buffer
automatically, which needs to initialize reference counter as 2, and
kref doesn't provide this interface, so convert to refcount_t.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Suggested-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250520045455.515691-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Block devices can be opened read-write even if they can't be written to
for historic reasons. Remove the check requiring file->f_op->write_iter
when the block devices was opened in loop_configure. The call to
loop_check_backing_file just below ensures the ->write_iter is present
for backing files opened for writing, which is the only check that is
actually needed.
Fixes: f5c84eff634b ("loop: Add sanity check for read/write_iter")
Reported-by: Christian Hesse <mail@eworm.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250520135420.1177312-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- fixes for atomic writes (Alan Adamson)
- fixes for polled CQs in nvmet-epf (Damien Le Moal)
- fix for polled CQs in nvme-pci (Keith Busch)
- fix compile on odd configs that need to be forced to inline
(Kees Cook)
- one more quirk (Ilya Guterman)
- Fix for missing allocation of an integrity buffer for some cases
- Fix for a regression with ublk command cancelation
* tag 'block-6.15-20250515' of git://git.kernel.dk/linux:
ublk: fix dead loop when canceling io command
nvme-pci: add NVME_QUIRK_NO_DEEPEST_PS quirk for SOLIDIGM P44 Pro
nvme: all namespaces in a subsystem must adhere to a common atomic write size
nvme: multipath: enable BLK_FEAT_ATOMIC_WRITES for multipathing
nvmet: pci-epf: remove NVMET_PCI_EPF_Q_IS_SQ
nvmet: pci-epf: improve debug message
nvmet: pci-epf: cleanup nvmet_pci_epf_raise_irq()
nvmet: pci-epf: do not fall back to using INTX if not supported
nvmet: pci-epf: clear completion queue IRQ flag on delete
nvme-pci: acquire cq_poll_lock in nvme_poll_irqdisable
nvme-pci: make nvme_pci_npages_prp() __always_inline
block: always allocate integrity buffer when required
|
|
Commit:
f40139fde527 ("ublk: fix race between io_uring_cmd_complete_in_task and
ublk_cancel_cmd")
adds a request state check in ublk_cancel_cmd(), and if the request is
started, skips canceling this uring_cmd.
However, the current uring_cmd may be in ACTIVE state, without block
request coming to the uring command. Meantime, if the cached request in
tag_set.tags[tag] has been delivered to ublk server and reycycled, then
this uring_cmd can't be canceled.
ublk requests are aborted in ublk char device release handler, which
depends on canceling all ACTIVE uring_cmd. So it causes a dead loop.
Fix this issue by not taking a stale request into account when canceling
uring_cmd in ublk_cancel_cmd().
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Closes: https://lore.kernel.org/linux-block/mruqwpf4tqenkbtgezv5oxwq7ngyq24jzeyqy4ixzvivatbbxv@4oh2wzz4e6qn/
Fixes: f40139fde527 ("ublk: fix race between io_uring_cmd_complete_in_task and ublk_cancel_cmd")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250515162601.77346-1-ming.lei@redhat.com
[axboe: rewording of commit message]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The xarray can return the previous entry at a location. Use this
fact to simplify the brd code when there is no existing page at
a location. This also slighly improves the handling of racy
discards as we now always have a page under RCU protection by the
time we are ready to copy the data.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250507060700.3929430-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The writeback interface supports a page_index=N parameter which performs
writeback of the given page. Since we rarely need to writeback just one
single page, the typical use case involves a number of writeback calls,
each performing writeback of one page:
echo page_index=100 > zram0/writeback
...
echo page_index=200 > zram0/writeback
echo page_index=500 > zram0/writeback
...
echo page_index=700 > zram0/writeback
One obvious downside of this is that it increases the number of syscalls.
Less obvious, but a significantly more important downside, is that when
given only one page to post-process zram cannot perform an optimal target
selection. This becomes a critical limitation when writeback_limit is
enabled, because under writeback_limit we want to guarantee the highest
memory savings hence we first need to writeback pages that release the
highest amount of zsmalloc pool memory.
This patch adds page_indexes=LOW-HIGH parameter to the writeback
interface:
echo page_indexes=100-200 page_indexes=500-700 > zram0/writeback
This gives zram a chance to apply an optimal target selection strategy on
each iteration of the writeback loop.
We also now permit multiple page_index parameters per call (previously
zram would recognize only one page_index) and a mix or single pages and
page ranges:
echo page_index=42 page_index=99 page_indexes=100-200 \
page_indexes=500-700 > zram0/writeback
Apart from that the patch also unifies parameters passing and resembles
other "modern" zram device attributes (e.g. recompression), while the old
interface used a mixed scheme: values-less parameters for mode and a
key=value format for page_index. We still support the "old" value-less
format for compatibility reasons.
[senozhatsky@chromium.org: simplify parse_page_index() range checks, per Brian]
nk: https://lkml.kernel.org/r/20250404015327.2427684-1-senozhatsky@chromium.org
[sozhatsky@chromium.org: fix uninitialized variable in zram_writeback_slots(), per Dan]
nk: https://lkml.kernel.org/r/20250409112611.1154282-1-senozhatsky@chromium.org
Link: https://lkml.kernel.org/r/20250327015818.4148660-1-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Brian Geffon <bgeffon@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Richard Chang <richardycc@google.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, zsmalloc, zswap's and zram's backend memory allocator, does not
enforce any policy for the allocation of memory for the compressed data,
instead just adopting the memory policy of the task entering reclaim, or
the default policy (prefer local node) if no such policy is specified.
This can lead to several pathological behaviors in multi-node NUMA
systems:
1. Systems with CXL-based memory tiering can encounter the following
inversion with zswap/zram: the coldest pages demoted to the CXL tier
can return to the high tier when they are reclaimed to compressed swap,
creating memory pressure on the high tier.
2. Consider a direct reclaimer scanning nodes in order of allocation
preference. If it ventures into remote nodes, the memory it compresses
there should stay there. Trying to shift those contents over to the
reclaiming thread's preferred node further *increases* its local
pressure, and provoking more spills. The remote node is also the most
likely to refault this data again. This undesirable behavior was
pointed out by Johannes Weiner in [1].
3. For zswap writeback, the zswap entries are organized in
node-specific LRUs, based on the node placement of the original pages,
allowing for targeted zswap writeback for specific nodes.
However, the compressed data of a zswap entry can be placed on a
different node from the LRU it is placed on. This means that reclaim
targeted at one node might not free up memory used for zswap entries in
that node, but instead reclaiming memory in a different node.
All of these issues will be resolved if the compressed data go to the same
node as the original page. This patch encourages this behavior by having
zswap and zram pass the node of the original page to zsmalloc, and have
zsmalloc prefer the specified node if we need to allocate new (zs)pages
for the compressed data.
Note that we are not strictly binding the allocation to the preferred
node. We still allow the allocation to fall back to other nodes when the
preferred node is full, or if we have zspages with slots available on a
different node. This is OK, and still a strict improvement over the
status quo:
1. On a system with demotion enabled, we will generally prefer
demotions over compressed swapping, and only swap when pages have
already gone to the lowest tier. This patch should achieve the desired
effect for the most part.
2. If the preferred node is out of memory, letting the compressed data
going to other nodes can be better than the alternative (OOMs, keeping
cold memory unreclaimed, disk swapping, etc.).
3. If the allocation go to a separate node because we have a zspage
with slots available, at least we're not creating extra immediate
memory pressure (since the space is already allocated).
3. While there can be mixings, we generally reclaim pages in same-node
batches, which encourage zspage grouping that is more likely to go to
the right node.
4. A strict binding would require partitioning zsmalloc by node, which
is more complicated, and more prone to regression, since it reduces the
storage density of zsmalloc. We need to evaluate the tradeoff and
benchmark carefully before adopting such an involved solution.
[1]: https://lore.kernel.org/linux-mm/20250331165306.GC2110528@cmpxchg.org/
[senozhatsky@chromium.org: coding-style fixes]
Link: https://lkml.kernel.org/r/mnvexa7kseswglcqbhlot4zg3b3la2ypv2rimdl5mh5glbmhvz@wi6bgqn47hge
Link: https://lkml.kernel.org/r/20250402204416.3435994-1-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Suggested-by: Gregory Price <gourry@gourry.net>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Acked-by: Sergey Senozhatsky <senozhatsky@chromium.org> [zram, zsmalloc]
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Yosry Ahmed <yosry.ahmed@linux.dev> [zswap/zsmalloc]
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pull block fixes from Jens Axboe:
- Fix for a regression in this series for loop and read/write iterator
handling
- zone append block update tweak
- remove a broken IO priority test
- NVMe pull request via Christoph:
- unblock ctrl state transition for firmware update (Daniel
Wagner)
* tag 'block-6.15-20250509' of git://git.kernel.dk/linux:
block: remove test of incorrect io priority level
nvme: unblock ctrl state transition for firmware update
block: only update request sector if needed
loop: Add sanity check for read/write_iter
|
|
Use the bio_add_virt_nofail to add a single kernel virtual address
to a bio as that can't fail.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250507120451.4000627-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove the q argument from blk_rq_map_kern and the internal helpers
called by it as the queue can trivially be derived from the request.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250507120451.4000627-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
brd_do_discard() just aligned start sector to page, this can only work
if the discard size if at least one page. For example:
blkdiscard /dev/ram0 -o 5120 -l 1024
In this case, size = (1024 - (8192 - 5120)), which is a huge value.
Fix the problem by round_down() the end sector.
Fixes: 9ead7efc6f3f ("brd: implement discard support")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250506061756.2970934-4-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The calculation is just wrong, fix it by round_up().
Fixes: 9ead7efc6f3f ("brd: implement discard support")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250506061756.2970934-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently, after fetching the page by xa_load() in IO path, there is no
protection and page can be freed concurrently by discard:
cpu0
brd_submit_bio
brd_do_bvec
page = brd_lookup_page
cpu1
brd_submit_bio
brd_do_discard
page = __xa_erase()
__free_page()
// page UAF
Fix the problem by protecting page with rcu.
Meanwhile, if page is already freed, also prevent BUG_ON() by skipping
the write, and user will get zero data later if there is no page.
Fixes: 9ead7efc6f3f ("brd: implement discard support")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250506061756.2970934-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Every ublk I/O command except UBLK_IO_FETCH_REQ checks that the ublk_io
has UBLK_IO_FLAG_OWNED_BY_SRV set. Consolidate the separate checks into
a single one in __ublk_ch_uring_cmd(), analogous to those for
UBLK_IO_FLAG_ACTIVE and UBLK_IO_FLAG_NEED_GET_DATA.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250505172624.1121839-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Some file systems do not support read_iter/write_iter, such as selinuxfs
in this issue.
So before calling them, first confirm that the interface is supported and
then call it.
It is releavant in that vfs_iter_read/write have the check, and removal
of their used caused szybot to be able to hit this issue.
Fixes: f2fed441c69b ("loop: stop using vfs_iter__{read,write} for buffered I/O")
Reported-by: syzbot+6af973a3b8dfd2faefdc@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=6af973a3b8dfd2faefdc
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250428143626.3318717-1-lizhi.xu@windriver.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Merge 6.15 block fixes in, once again, to resolve conflicts with the
fixes for ublk that went into mainline and the 6.16 ublk updates.
* block-6.15:
nvmet-auth: always free derived key data
nvmet-tcp: don't restore null sk_state_change
nvmet-tcp: select CONFIG_TLS from CONFIG_NVME_TARGET_TCP_TLS
nvme-tcp: select CONFIG_TLS from CONFIG_NVME_TCP_TLS
nvme-tcp: fix premature queue removal and I/O failover
nvme-pci: add quirks for WDC Blue SN550 15b7:5009
nvme-pci: add quirks for device 126f:1001
nvme-pci: fix queue unquiesce check on slot_reset
ublk: remove the check of ublk_need_req_ref() from __ublk_check_and_get_req
ublk: enhance check for register/unregister io buffer command
ublk: decouple zero copy from user copy
selftests: ublk: fix UBLK_F_NEED_GET_DATA
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- fix queue unquiesce check on PCI slot_reset (Keith Busch)
- fix premature queue removal and I/O failover in nvme-tcp (Michael
Liang)
- don't restore null sk_state_change (Alistair Francis)
- select CONFIG_TLS where needed (Alistair Francis)
- always free derived key data (Hannes Reinecke)
- more quirks (Wentao Guan)
- ublk zero copy fix
- ublk selftest fix for UBLK_F_NEED_GET_DATA
* tag 'block-6.15-20250502' of git://git.kernel.dk/linux:
nvmet-auth: always free derived key data
nvmet-tcp: don't restore null sk_state_change
nvmet-tcp: select CONFIG_TLS from CONFIG_NVME_TARGET_TCP_TLS
nvme-tcp: select CONFIG_TLS from CONFIG_NVME_TCP_TLS
nvme-tcp: fix premature queue removal and I/O failover
nvme-pci: add quirks for WDC Blue SN550 15b7:5009
nvme-pci: add quirks for device 126f:1001
nvme-pci: fix queue unquiesce check on slot_reset
ublk: remove the check of ublk_need_req_ref() from __ublk_check_and_get_req
ublk: enhance check for register/unregister io buffer command
ublk: decouple zero copy from user copy
selftests: ublk: fix UBLK_F_NEED_GET_DATA
|
|
A ublk_io is converted to a request in several places in the I/O path by
using blk_mq_tag_to_rq() to look up the (qid, tag) on the ublk device's
tagset. This involves a bunch of dereferences and a tag bounds check.
To make this conversion cheaper, store the request pointer in ublk_io.
Overlap this storage with the io_uring_cmd pointer. This is safe because
the io_uring_cmd pointer is only valid if UBLK_IO_FLAG_ACTIVE is set on
the ublk_io, the request pointer is valid if UBLK_IO_FLAG_OWNED_BY_SRV,
and these flags are mutually exclusive.
Suggested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250430225234.2676781-10-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ublk_abort_queue() currently checks whether the UBLK_IO_FLAG_ACTIVE flag
is cleared to tell whether to abort each ublk_io in the queue. But it's
possible for a ublk_io to not be ACTIVE but also not have a request in
flight, such as when no fetch request has yet been submitted for a tag
or when a fetch request is cancelled. So ublk_abort_queue() must
additionally check for an inflight request.
Simplify this code by checking for UBLK_IO_FLAG_OWNED_BY_SRV instead,
which indicates precisely whether a request is currently inflight.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250430225234.2676781-9-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ublk_dispatch_req() currently handles 3 different cases: incoming ublk
requests that don't need to wait for a data buffer, incoming requests
that do need to wait for a buffer, and resuming those requests once the
buffer is provided. But the call site that provides a data buffer
(UBLK_IO_NEED_GET_DATA) is separate from those for incoming requests.
So simplify the function by splitting the UBLK_IO_NEED_GET_DATA case
into its own function ublk_get_data(). This avoids several redundant
checks in the UBLK_IO_NEED_GET_DATA case, and streamlines the incoming
request cases.
Don't call ublk_fill_io_cmd() for UBLK_IO_NEED_GET_DATA, as it's no
longer necessary to set io->cmd or the UBLK_IO_FLAG_ACTIVE flag for
ublk_dispatch_req().
Since UBLK_IO_NEED_GET_DATA no longer relies on ublk_dispatch_req()
calling io_uring_cmd_done(), return the UBLK_IO_RES_OK status directly
from the ->uring_cmd() handler. If ublk_start_io() fails, don't complete
the UBLK_IO_NEED_GET_DATA command, matching the existing behavior.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250430225234.2676781-8-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In preparation for calling it from outside ublk_dispatch_req(), factor
out the code responsible for setting up an incoming ublk I/O request.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250430225234.2676781-7-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
cmd_op is either UBLK_U_IO_FETCH_REQ, UBLK_U_IO_COMMIT_AND_FETCH_REQ,
or UBLK_U_IO_NEED_GET_DATA. Which one isn't particularly interesting
and is already recorded by the log line in __ublk_ch_uring_cmd().
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250430225234.2676781-6-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ublk_get_iod() doesn't modify the struct ublk_queue it is passed.
Clarify that by making the argument a const pointer.
Move the function definition earlier in the file so it doesn't need a
forward declaration.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250430225234.2676781-5-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ubq_complete_io_cmd() doesn't interact with a ublk queue, so "ubq" in
the name is confusing. Most likely "ubq" was meant to be "ublk".
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250430225234.2676781-4-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Looks like "immediately" was intended.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250430225234.2676781-3-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move the logic for the UBLK_IO_COMMIT_AND_FETCH_REQ opcode into its own
function. This also allows us to mark ublk_queue pointers as const for
that operation, which can help prevent data races since we may allow
concurrent operation on one ublk_queue in the future. Also open code
ublk_commit_completion in ublk_commit_and_fetch to reduce the number of
parameters/avoid a redundant lookup.
[Restore __ublk_ch_uring_cmd() req variable used in commit d6aa0c178bf8
("ublk: call ublk_dispatch_req() for handling UBLK_U_IO_NEED_GET_DATA")]
Suggested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://lore.kernel.org/r/20250430225234.2676781-2-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Introduce the zoned_loop.rst documentation file under
admin-guide/blockdev to document the zoned loop block device driver.
An overview of the driver is provided and its usage to create and delete
zoned devices described.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250407075222.170336-3-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The zoned loop block device driver allows a user to create emulated
zoned block devices using one regular file per zone as backing storage.
Compared to null_blk or scsi_debug, it has the advantage of allowing
emulating large zoned devices without requiring the same amount of
memory as the capacity of the emulated device. Furthermore, zoned
devices emulated with this driver can be re-started after a host reboot
without any loss of the state of the device zones, which is something
that null_blk and scsi_debug do not support.
This initial implementation is simple and does not support zone resource
limits. That is, a zoned loop block device limits for the maximum number
of open zones and maximum number of active zones is always 0.
This driver can be either compiled in-kernel or as a module, named
"zloop". Compilation of this driver depends on the block layer support
for zoned block device (CONFIG_BLK_DEV_ZONED must be set).
Using the zloop driver to create and delete zoned block devices is
done by writing commands to the zoned loop control character device file
(/dev/zloop-control). Creating a device is done with:
$ echo "add [options]" > /dev/zloop-control
The options available for the "add" operation cat be listed by reading
the zloop-control device file:
$ cat /dev/zloop-control
add id=%d,capacity_mb=%u,zone_size_mb=%u,zone_capacity_mb=%u,conv_zones=%u,base_dir=%s,nr_queues=%u,queue_depth=%u
remove id=%d
The options available allow controlling the zoned device total
capacity, zone size, zone capactity of sequential zones, total number
of conventional zones, base directory for the zones backing file, number
of I/O queues and the maximum queue depth of I/O queues.
Deleting a device is done using the "remove" command:
$ echo "remove id=0" > /dev/zloop-control
This implementation passes various tests using zonefs and fio (t/zbd
tests) and provides a state machine for zone conditions that is
compliant with the T10 ZBC and NVMe ZNS specifications.
Co-developed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250407075222.170336-2-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
__ublk_check_and_get_req() is only called from ublk_check_and_get_req()
and ublk_register_io_buf(), the same check has been covered in the two
calling sites.
So remove the check from __ublk_check_and_get_req().
Suggested-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250429022941.1718671-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The simple check of UBLK_IO_FLAG_OWNED_BY_SRV can avoid incorrect
register/unregister io buffer easily, so check it before calling
starting to register/un-register io buffer.
Also only allow io buffer register/unregister uring_cmd in case of
UBLK_F_SUPPORT_ZERO_COPY.
Also mark argument 'ublk_queue *' of ublk_register_io_buf as const.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: 1f6540e2aabb ("ublk: zc register/unregister bvec")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250429022941.1718671-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
UBLK_F_USER_COPY and UBLK_F_SUPPORT_ZERO_COPY are two different
features, and shouldn't be coupled together.
Commit 1f6540e2aabb ("ublk: zc register/unregister bvec") enables
user copy automatically in case of UBLK_F_SUPPORT_ZERO_COPY, this way
isn't correct.
So decouple zero copy from user copy, and use independent helper to
check each one.
Fixes: 1f6540e2aabb ("ublk: zc register/unregister bvec")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250429022941.1718671-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use the proper helpers to copy to/from potential highmem pages, which
do a local instead of atomic kmap underneath, and perform
flush_dcache_page where needed. This also simplifies the code so much
that the separate read write helpers are not required any more.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250428141014.2360063-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A lot of complexity in brd stems from the fact that it tries to handle
I/O spanning two backing pages. Instead limit the size of a single
bvec iteration so that it never crosses a page boundary and remove all
the now unneeded code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250428141014.2360063-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use the proper helper to kmap a bvec in brd_do_bvec instead of directly
accessing the bvec fields and use the deprecated kmap_atomic API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250428141014.2360063-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The bvec iter iterates over the sector already, no need to duplicate the
work.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250428141014.2360063-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pass the bvec to brd_do_bvec instead of marshalling the information into
individual arguments.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250428141014.2360063-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block fixes from Jens Axboe:
- Fix autoloading of drivers from stat*(2)
- Fix losing read-ahead setting one suspend/resume, when a device is
re-probed.
- Fix race between setting the block size and page cache updates.
Includes a helper that a coming XFS fix will use as well.
- ublk cancelation fixes.
- ublk selftest additions and fixes.
- NVMe pull via Christoph:
- fix an out-of-bounds access in nvmet_enable_port (Richard
Weinberger)
* tag 'block-6.15-20250424' of git://git.kernel.dk/linux:
ublk: fix race between io_uring_cmd_complete_in_task and ublk_cancel_cmd
ublk: call ublk_dispatch_req() for handling UBLK_U_IO_NEED_GET_DATA
block: don't autoload drivers on blk-cgroup configuration
block: don't autoload drivers on stat
block: remove the backing_inode variable in bdev_statx
block: move blkdev_{get,put} _no_open prototypes out of blkdev.h
block: never reduce ra_pages in blk_apply_bdi_limits
selftests: ublk: common: fix _get_disk_dev_t for pre-9.0 coreutils
selftests: ublk: remove useless 'delay_us' from 'struct dev_ctx'
selftests: ublk: fix recover test
block: hoist block size validation code to a separate function
block: fix race between set_blocksize and read paths
nvmet: fix out-of-bounds access in nvmet_enable_port
|
|
Merge 6.15 block fixes - both to get the fixes causing issues with
XFS testing, but also to make it easier for 6.16 ublk patches to avoid
conflicts.
* block-6.15:
ublk: fix race between io_uring_cmd_complete_in_task and ublk_cancel_cmd
ublk: call ublk_dispatch_req() for handling UBLK_U_IO_NEED_GET_DATA
block: don't autoload drivers on blk-cgroup configuration
block: don't autoload drivers on stat
block: remove the backing_inode variable in bdev_statx
block: move blkdev_{get,put} _no_open prototypes out of blkdev.h
block: never reduce ra_pages in blk_apply_bdi_limits
selftests: ublk: common: fix _get_disk_dev_t for pre-9.0 coreutils
selftests: ublk: remove useless 'delay_us' from 'struct dev_ctx'
selftests: ublk: fix recover test
block: hoist block size validation code to a separate function
block: fix race between set_blocksize and read paths
nvmet: fix out-of-bounds access in nvmet_enable_port
|
|
ublk_cancel_cmd() calls io_uring_cmd_done() to complete uring_cmd, but
we may have scheduled task work via io_uring_cmd_complete_in_task() for
dispatching request, then kernel crash can be triggered.
Fix it by not trying to canceling the command if ublk block request is
started.
Fixes: 216c8f5ef0f2 ("ublk: replace monitor with cancelable uring_cmd")
Reported-by: Jared Holzman <jholzman@nvidia.com>
Tested-by: Jared Holzman <jholzman@nvidia.com>
Closes: https://lore.kernel.org/linux-block/d2179120-171b-47ba-b664-23242981ef19@nvidia.com/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250425013742.1079549-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We call io_uring_cmd_complete_in_task() to schedule task_work for handling
UBLK_U_IO_NEED_GET_DATA.
This way is really not necessary because the current context is exactly
the ublk queue context, so call ublk_dispatch_req() directly for handling
UBLK_U_IO_NEED_GET_DATA.
Fixes: 216c8f5ef0f2 ("ublk: replace monitor with cancelable uring_cmd")
Tested-by: Jared Holzman <jholzman@nvidia.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250425013742.1079549-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
