summaryrefslogtreecommitdiff
path: root/drivers/bluetooth/btintel.h
AgeCommit message (Collapse)Author
2025-05-21Bluetooth: btintel_pcie: Do not generate coredump for diagnostic eventsKiran K
All Intel diagnostic events are part of HCI traces and there is no need to generate coredump for the same. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25t blameBluetooth: btintel: Fix leading white spaceKiran K
Remove the unwanted leading whitespace. Fixes: 6ed83047389c ("Bluetooth: btintel_pcie: Setup buffers for firmware traces") Fixes: bb3569ac3604 ("Bluetooth: btintel: Add DSBR support for ScP") Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btintel: Add support to configure TX powerVijay Satija
BRDS - Bluetooth Regulatory Domain Specific absorption rate Bluetooth has regulatory limitations which prohibit or allow usage of certain bands or channels as well as limiting Tx power. The Tx power values can be configured in ACPI table. This patch reads from ACPI entry configures the controller accordingly. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Vijay Satija <vijay.satija@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btintel_pcie: Add support for device coredumpKiran K
1. Driver registers device coredump callback 2. Dumps firmware traces as part of coredump Co-developed-by: Vijay Satija <vijay.satija@intel.com> Signed-off-by: Vijay Satija <vijay.satija@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btintel_pcie: Read hardware exception dataKiran K
On hardware error, controller writes hardware error event and optional vendor specific hci events in device memory in TLV format and raises MSIX interrupt. Driver reads the device memory and passes the events to the stack for further processing. Co-developed-by: Vijay Satija <vijay.satija@intel.com> Signed-off-by: Vijay Satija <vijay.satija@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-03-25Bluetooth: btintel: Add DSBR support for ScPKiran K
Add DSBR support for Scorpious Peak cores. Refer commit eb9e749c0182 ("Bluetooth: btintel: Allow configuring drive strength of BRI") for details about DSBR. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btintel: Add DSBR support for BlazarIW, BlazarU and GaPKiran K
Add DSBR support for BlazarIW, BlazarU and Gale Peak2 cores. Refer commit eb9e749c0182 ("Bluetooth: btintel: Allow configuring drive strength of BRI") for details about DSBR. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: btintel_pcie: Add handshake between driver and firmwareKiran K
The following handshake mechanism needs be followed after firmware download is completed to bring the firmware to running state. After firmware fragments of Operational image are downloaded and secure sends result of the image succeeds, 1. Driver sends HCI Intel reset with boot option #1 to switch FW image. 2. FW sends Alive GP[0] MSIx 3. Driver enables data path (doorbell 0x460 for RBDs, etc...) 4. Driver gets Bootup event from firmware 5. Driver performs D0 entry to device (WRITE to IPC_Sleep_Control =0x0) 6. FW sends Alive GP[0] MSIx 7. Device host interface is fully set for BT protocol stack operation. 8. Driver may optionally get debug event with ID 0x97 which can be dropped For Intermediate loadger image, all the above steps are applicable expcept #5 and #6. On HCI_OP_RESET, firmware raises alive interrupt. Driver needs to wait for it before passing control over to bluetooth stack. Co-developed-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com> Signed-off-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-14Bluetooth: btintel: Add firmware ID to firmware nameKiran K
From BlazarI onwards, driver shall append the firmware ID (usually represents transport type) while constructing the firmware name. Firmware ID is returned on Intel Read Version command. The new firmware file name for operational image and ddc file shall be, ibt-<cnvi_top type+cnvi_top step>-<cnvr_top type+cnvr_top step-fw_id>.[sfi|ddc] dmesg snippet from BlazarI pcie product: ...... [17.098858] Bluetooth: hci0: Found device firmware: intel/ibt-0190-0291-pci.sfi [17.098871] Bluetooth: hci0: Boot Address: 0x10000800 [17.098872] Bluetooth: hci0: Firmware Version: 214-25.24 [17.158229] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [17.158236] Bluetooth: BNEP filters: protocol multicast [17.158241] Bluetooth: BNEP socket layer initialized [17.468789] Bluetooth: hci0: Waiting for firmware download to complete [17.468793] Bluetooth: hci0: Firmware loaded in 361262 usecs [17.468872] Bluetooth: hci0: Waiting for device to boot [17.504148] Bluetooth: hci0: Device booted in 34512 usecs [17.504148] Bluetooth: hci0: Malformed MSFT vendor event: 0x02 [17.504682] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0190-0291-pci.ddc [17.505380] Bluetooth: hci0: Applying Intel DDC parameters completed [17.505622] Bluetooth: hci0: Firmware timestamp 2024.25 buildtype 3 build 64726 [17.505624] Bluetooth: hci0: Firmware SHA1: 0x9f4adddc [17.505838] Bluetooth: hci0: Fseq status: Success (0x00) [17.505839] Bluetooth: hci0: Fseq executed: 00.00.04.183 [17.505840] Bluetooth: hci0: Fseq BT Top: 00.00.04.183 dmesg snippet from BlazarI usb product: ....... [14.212072] Bluetooth: hci0: Found device firmware: intel/ibt-0190-0291-usb.sfi [14.212091] Bluetooth: hci0: Boot Address: 0x10000800 [14.212093] Bluetooth: hci0: Firmware Version: 79-21.24 [14.262125] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [14.262129] Bluetooth: BNEP filters: protocol multicast [14.262133] Bluetooth: BNEP socket layer initialized [15.865421] Bluetooth: hci0: Waiting for firmware download to complete [15.865991] Bluetooth: hci0: Firmware loaded in 1615150 usecs [15.866017] Bluetooth: hci0: Waiting for device to boot [15.899934] Bluetooth: hci0: Malformed MSFT vendor event: 0x02 [15.899942] Bluetooth: hci0: Device booted in 33139 usecs [15.900172] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0190-0291-usb.ddc [15.901928] Bluetooth: hci0: Applying Intel DDC parameters completed [15.904993] Bluetooth: hci0: Firmware timestamp 2024.21 buildtype 3 build 63311 [15.904996] Bluetooth: hci0: Firmware SHA1: 0x8b217cf7 [15.908929] Bluetooth: hci0: Fseq status: Success (0x00) [15.908934] Bluetooth: hci0: Fseq executed: 00.00.04.180 [15.908935] Bluetooth: hci0: Fseq BT Top: 00.00.04.180 Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-14Bluetooth: btintel_pcie: Print Firmware Sequencer informationKiran K
Firmware sequencer (FSEQ) is a common code shared across Bluetooth and Wifi. Printing FSEQ will help to debug if there is any mismatch between Bluetooth and Wifi FSEQ. Make 'btintel_print_fseq_info' public and use it in btintel_pcie.c. dmesg: .... [ 5335.695740] Bluetooth: hci0: Device booted in 33872 usecs [ 5335.695918] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0190-0291.ddc [ 5335.697011] Bluetooth: hci0: Applying Intel DDC parameters completed [ 5335.697837] Bluetooth: hci0: Firmware timestamp 2024.20 buildtype 0 build 62871 [ 5335.697848] Bluetooth: hci0: Firmware SHA1: 0xeffdce06 [ 5335.698655] Bluetooth: hci0: Fseq status: Success (0x00) [ 5335.698666] Bluetooth: hci0: Fseq executed: 00.00.04.176 [ 5335.698670] Bluetooth: hci0: Fseq BT Top: 00.00.04.176 [ 5335.750204] Bluetooth: MGMT ver 1.22 Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-05-14Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig configKiran K
Fix the following compiler warning reported for ARCH=arm multi_v7_defconfig. In file included from drivers/bluetooth/hci_ldisc.c:34: drivers/bluetooth/btintel.h:373:13: warning: 'btintel_hw_error' defined but not used [-Wunused-function] 373 | static void btintel_hw_error(struct hci_dev *hdev, u8 code) | ^~~~~~~~~~~~~~~~ cc: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 67d4dbac3b8c ("Bluetooth: btintel: Export few static functions") Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-05-14Bluetooth: btintel_pcie: Add support for PCIe transportTedd Ho-Jeong An
Add initial code to support Intel bluetooth devices based on PCIe transport. Allocate memory for TX & RX buffers, internal structures, initialize interrupts for TX & RX and PCIe device. Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Suggested-by: Bjorn Helgaas <helgaas@kernel.org> Suggested-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-05-14Bluetooth: btintel: Export few static functionsKiran K
Some of the functions used in btintel.c is made global so that they can be reused in other transport drivers apart from USB. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-05-14Bluetooth: btintel: Add support to download intermediate loaderKiran K
Some variants of Intel controllers like BlazarI supports downloading of Intermediate bootloader (IML) image. IML gives flexibility to fix issues as its not possible to fix issue in Primary bootloader once flashed to ROM. This patch adds the support to download IML before downloading operational firmware image. dmesg logs: [13.399003] Bluetooth: Core ver 2.22 [13.399006] Bluetooth: Starting self testing [13.401194] Bluetooth: ECDH test passed in 2135 usecs [13.421175] Bluetooth: SMP test passed in 597 usecs [13.421184] Bluetooth: Finished self testing [13.422919] Bluetooth: HCI device and connection manager initialized [13.422923] Bluetooth: HCI socket layer initialized [13.422925] Bluetooth: L2CAP socket layer initialized [13.422930] Bluetooth: SCO socket layer initialized [13.458065] Bluetooth: hci0: Device revision is 0 [13.458071] Bluetooth: hci0: Secure boot is disabled [13.458072] Bluetooth: hci0: OTP lock is disabled [13.458072] Bluetooth: hci0: API lock is enabled [13.458073] Bluetooth: hci0: Debug lock is disabled [13.458073] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [13.458075] Bluetooth: hci0: Bootloader timestamp 2022.46 buildtype 1 build 26590 [13.458324] Bluetooth: hci0: DSM reset method type: 0x00 [13.460678] Bluetooth: hci0: Found device firmware: intel/ibt-0090-0291-iml.sfi [13.460684] Bluetooth: hci0: Boot Address: 0x30099000 [13.460685] Bluetooth: hci0: Firmware Version: 227-11.24 [13.562554] Bluetooth: hci0: Waiting for firmware download to complete [13.563023] Bluetooth: hci0: Firmware loaded in 99941 usecs [13.563057] Bluetooth: hci0: Waiting for device to boot [13.565029] Bluetooth: hci0: Malformed MSFT vendor event: 0x02 [13.565148] Bluetooth: hci0: Device booted in 2064 usecs [13.567065] Bluetooth: hci0: No device address configured [13.569010] Bluetooth: hci0: Found device firmware: intel/ibt-0090-0291.sfi [13.569061] Bluetooth: hci0: Boot Address: 0x10000800 [13.569062] Bluetooth: hci0: Firmware Version: 227-11.24 [13.788891] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [13.788897] Bluetooth: BNEP filters: protocol multicast [13.788902] Bluetooth: BNEP socket layer initialized [15.435905] Bluetooth: hci0: Waiting for firmware download to complete [15.436016] Bluetooth: hci0: Firmware loaded in 1823233 usecs [15.436258] Bluetooth: hci0: Waiting for device to boot [15.471140] Bluetooth: hci0: Device booted in 34277 usecs [15.471201] Bluetooth: hci0: Malformed MSFT vendor event: 0x02 [15.471487] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0090-0291.ddc [15.474353] Bluetooth: hci0: Applying Intel DDC parameters completed [15.474486] Bluetooth: hci0: Found Intel DDC parameters: intel/bdaddress.cfg [15.475299] Bluetooth: hci0: Applying Intel DDC parameters completed [15.479381] Bluetooth: hci0: Firmware timestamp 2024.10 buildtype 3 build 58595 [15.479385] Bluetooth: hci0: Firmware SHA1: 0xb4f3cc46 [15.483243] Bluetooth: hci0: Fseq status: Success (0x00) [15.483246] Bluetooth: hci0: Fseq executed: 00.00.00.00 [15.483247] Bluetooth: hci0: Fseq BT Top: 00.00.00.00 [15.578712] Bluetooth: MGMT ver 1.22 [15.822682] Bluetooth: RFCOMM TTY layer initialized [15.822690] Bluetooth: RFCOMM socket layer initialized [15.822695] Bluetooth: RFCOMM ver 1.11 Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-05-14Bluetooth: btintel: Define macros for image typesKiran K
Use macro for image type instead of using hard code number. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-12-22Bluetooth: btintel: Print firmware SHA1Kiran K
Intel Read Version event contains a TLV(0x32) having firmware sha1 in operational image. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-24Bluetooth: btintel: Send new command for PPAGLokendra Singh
Added support for the new command opcode FE0B (HCI Intel PPAG Enable). btmon log: < HCI Command: Intel PPAG Enable (0x3f|0x020b) plen 4 Enable: 0x00000002 > HCI Event: Command Complete (0x0e) plen 4 Intel PPAG Enable (0x3f|0x020b) ncmd 1 Status: Success (0x00) Signed-off-by: Seema Sreemantha <seema.sreemantha@intel.com> Signed-off-by: Lokendra Singh <lokendra.singh@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-11Bluetooth: btusb: Move btusb_recv_event_intel to btintelLuiz Augusto von Dentz
btusb_recv_event_intel is specific to Intel controllers therefore it shall be placed inside btintel.c so btusb don't have a mix of vendor specific code with the generic parts. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-08-11Bluetooth: btintel: Add support to reset bluetooth via ACPI DSMKiran K
New Intel platforms supports reset of Bluetooth device via ACPI DSM methods. The legacy reset mechanism via GPIO will be deprecated in future. This patch checks the platform support for reset methods and if supported uses the same instead of legacy GPIO toggling method. ACPI firmware supports two types of reset method based on NIC card. (Discrete or Integrated). 1. VSEC Type - Vendor Specific Extended Capability. Here BT_EN and BT_IF_SELECT lines are driven by a register in PCH cluster. This interface is supported on discrete BT solution. 2. WDISABLE2 - In this soluton, W_DISABLE2 pin in M.2 is connected to physical GPIO from PCH. The DSM interface shall toggle this to recover from error. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: btintel: Add Intel devcoredump supportAbhishek Pandit-Subedi
Intercept debug exception events from the controller and put them into a devcoredump using hci devcoredump APIs. The debug exception contains data in a TLV format and it will be parsed in userspace. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Chethan Tumkur Narayan <chethan.tumkur.narayan@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-03-22Bluetooth: btintel: Iterate only bluetooth device ACPI entriesKiran K
Current flow interates over entire ACPI table entries looking for Bluetooth Per Platform Antenna Gain(PPAG) entry. This patch iterates over ACPI entries relvant to Bluetooth device only. Fixes: c585a92b2f9c ("Bluetooth: btintel: Set Per Platform Antenna Gain(PPAG)") Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-02-09Bluetooth: btintel: Set Per Platform Antenna Gain(PPAG)Seema Sreemantha
Antenna gain is defined as the antenna’s ability to increase the Tx power in a given direction. Intel is certifying its products with fixed reference antenna peak gain values (3/5dBi). The feature takes into account the actual antenna gain, and increases output power values, which results in a performance improvement. After firmware download is completed, driver reads from ACPI table and configures PPAG as required. ACPI table entry for PPAG is defined as below. Name (PPAG, Package (0x02) { 0x00000001, Package (0x02) { 0x00000012, /* Bluetooth Domain */ 0x00000001 /* 1 - Enable PPAG, 0 - Disable PPAG */ } }) btmon log: < HCI Command: Intel Configure Per Platform Antenna Gain (0x3f|0x0219) plen 12 Mcc: 0x00000000 Selector: Enable Delta: 0x00000000 > HCI Event: Command Complete (0x0e) plen 4 Intel Configure Per Platform Antenna Gain (0x3f|0x0219) ncmd 1 Status: Success (0x00) Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Seema Sreemantha <seema.sreemantha@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-01-21Bluetooth: btintel: Fix WBS setting for Intel legacy ROM productsTedd Ho-Jeong An
This patch adds the flag to identify the Intel legacy ROM products that don't support WBS like WP and StP. Fixes: 3df4dfbec0f29 ("Bluetooth: btintel: Move hci quirks to setup routine") Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-07Bluetooth: btintel: Fix broken LED quirk for legacy ROM devicesTedd Ho-Jeong An
This patch fixes the broken LED quirk for Intel legacy ROM devices. To fix the LED issue that doesn't turn off immediately, the host sends the SW RFKILL command while shutting down the interface and it puts the devices in SW RFKILL state. Once the device is in SW RFKILL state, it can only accept HCI_Reset to exit from the SW RFKILL state. This patch checks the quirk for broken LED and sends the HCI_Reset before sending the HCI_Intel_Read_Version command. The affected legacy ROM devices are - 8087:07dc - 8087:0a2a - 8087:0aa7 Fixes: ffcba827c0a1d ("Bluetooth: btintel: Fix the LED is not turning off immediately") Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-07Bluetooth: btintel: Read supported offload use casesKiran K
Read offload use cases supported by controller. Signed-off-by: Kiran K <kiran.k@intel.com> Reviewed-by: Chethan T N <chethan.tumkur.narayan@intel.com> Reviewed-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-08-30Bluetooth: set quality report callback for IntelJoseph Hwang
This patch sets up set_quality_report callback for Intel to set and reset the debug features. Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Joseph Hwang <josephsih@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-08-05Bluetooth: btintel: Clean the exported function to staticTedd Ho-Jeong An
This patch changes the exported functions to static if they are no longer used by others. Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-08-05Bluetooth: btintel: Refactoring setup routine for bootloader devicesTedd Ho-Jeong An
This patch refactors the setup routines for legacy and TLV based bootloader devices to the combined setup, and move the related functions from btusb to btintel. Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-08-05Bluetooth: btintel: Add combined set_diag functionsTedd Ho-Jeong An
This patch adds a combined set_diag functions. It also changes the btintel_set_diag_mfg() to static since it is no longer used by others. Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-08-05Bluetooth: btintel: Fix the LED is not turning off immediatelyTedd Ho-Jeong An
Some platforms have an issue with BT LED when the interface is down or BT radio is turned off, which takes 5 seconds to BT LED goes off. This command turns off the BT LED immediately. This patch sends the Intel vendor command to turn off the LED. Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-08-05Bluetooth: btintel: Fix the first HCI command not work with ROM deviceTedd Ho-Jeong An
The some legacy ROM controllers have a bug with the first HCI command sent to it returning number of completed commands as zero, which would stall the command processing in the Bluetooth core. As a workaround, send HCI Rest command first which will reset the controller to fix the issue. Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-08-05Bluetooth: btintel: Add btintel data structTedd Ho-Jeong An
This patch adds a data structure for btintel for btintel object, and the definition of bootloder states. It also adds macros to set/test/clear the flags. Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-08-05Bluetooth: btintel: Refactoring setup routine for legacy ROM skuTedd Ho-Jeong An
This patch refactors the setup routines for legacy ROM product into combined setup, and move the related functions from btusb to btintel. Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-08-05Bluetooth: btintel: Add combined setup and shutdown functionsTedd Ho-Jeong An
There are multiple setup and shutdown functions for Intel device and the setup function to be used is depends on the USB PID/VID, which makes difficult to maintain the code and increases the code size. This patch adds combined setup and shutdown functions to provide a single entry point for all Intel devices and choose the setup functions based on the information read with HCI_Intel_Read_Version command. Starting from TyP device, the command and response parameters for HCI_Intel_Read_Version command are changed even though OCF remains same. However, the legacy devices still can handle the command without error even if it has a extra parameter, so to simplify the flow, the new command format is used to read the version information for both legacy and new (tlv based) format. Also, it also adds a routine to setup the hdev callbacks in btintel. Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-03-25Bluetooth: btintel: Consolidate intel_version parsingLuiz Augusto von Dentz
This moves version checks of intel_version() to btintel_version_info(). Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-03-25Bluetooth: btintel: Consolidate intel_version_tlv parsingLuiz Augusto von Dentz
This moves version checks of intel_version_tlv() to btintel_version_info_tlv(). Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-03-25Bluetooth: btintel: Check firmware version before downloadLuiz Augusto von Dentz
This checks the firmware build number, week and year against the repective loaded version. If details are a match, skip the download process. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-12-07Bluetooth: btusb: Define a function to construct firmware filenameKiran K
Define a new function to construct firmware/ddc filename for new generation Intel controllers Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-10-30Bluetooth: btintel: Replace zero-length array with flexible-array memberGustavo A. R. Silva
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.9/process/deprecated.html#zero-length-and-one-element-arrays Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-09-14Bluetooth: btintel: Functions to send firmware header / payloadKiran K
New generation controllers supports ECDSA secure boot engine. This patch adds, 1) function to send ECDSA header 2) function to download complete firmware for new generation Intel controllers Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Amit K Bag <amit.k.bag@intel.com> Signed-off-by: Raghuram Hegde <raghuram.hegde@intel.com> Reviewed-by: Chethan T N <chethan.tumkur.narayan@intel.com> Reviewed-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-14Bluetooth: btintel: Add infrastructure to read controller informationKiran K
New generation Intel controllers returns version information in TLV format. This patch adds, 1) Enums, structures for TLV 2) function to read controller information, parse TLV data and populate intel_version_tlv structure 3) function to print version information Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Amit K Bag <amit.k.bag@intel.com> Signed-off-by: Raghuram Hegde <raghuram.hegde@intel.com> Reviewed-by: Chethan T N <chethan.tumkur.narayan@intel.com> Reviewed-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-06-10Bluetooth: btusb: Configure Intel debug feature based on available supportChethan T N
This patch shall enable the Intel telemetry exception format based on the supported features Signed-off-by: Chethan T N <chethan.tumkur.narayan@intel.com> Signed-off-by: Ps AyappadasX <AyappadasX.Ps@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-06-10Bluetooth: btusb: Add support to read Intel debug featureChethan T N
The command shall read the Intel controller supported debug feature. Based on the supported features additional debug configuration shall be enabled. Signed-off-by: Chethan T N <chethan.tumkur.narayan@intel.com> Signed-off-by: Ps AyappadasX <AyappadasX.Ps@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-10-19Bluetooth: btusb: Remove return statement in btintel_reset_to_bootloaderNathan Chancellor
When building with Clang and CONFIG_BT_INTEL unset, the following error occurs: In file included from drivers/bluetooth/hci_ldisc.c:34: drivers/bluetooth/btintel.h:188:2: error: void function 'btintel_reset_to_bootloader' should not return a value [-Wreturn-type] return -EOPNOTSUPP; ^ ~~~~~~~~~~~ 1 error generated. Remove the unneeded return statement to fix this. Fixes: b9a2562f4918 ("Bluetooth: btusb: Trigger Intel FW download error recovery") Link: https://github.com/ClangBuiltLinux/linux/issues/743 Reported-by: <ci_notify@linaro.org> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-10-17Bluetooth: btusb: Trigger Intel FW download error recoveryAmit K Bag
Sometimes during FW data download stage, in case of an error is encountered the controller device could not be recovered. To recover from such failures send Intel hard Reset to re-trigger FW download in following error scenarios: 1. Intel Read version command error 2. Firmware download timeout 3. Failure in Intel Soft Reset for switching to operational FW 4. Boot timeout for switching to operaional FW Signed-off-by: Raghuram Hegde <raghuram.hegde@intel.com> Signed-off-by: Chethan T N <chethan.tumkur.narayan@intel.com> Signed-off-by: Amit K Bag <amit.k.bag@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-25Bluetooth: btintel: Create common function for firmware downloadTedd Ho-Jeong An
The firmware download flow for RAM SKU is same for both USB and UART and this patch creates a common function for both driver. Signed-off-by: Tedd Ho-Jeong An <tedd.an@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-01-24Bluetooth: btintel: Create common Intel Read Boot Params functionTedd Ho-Jeong An
The Intel_Read_Boot_Params command is used to read boot parameters from the bootloader and this is Intel generic command used in USB and UART drivers. Signed-off-by: Tedd Ho-Jeong An <tedd.an@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-01-24Bluetooth: btintel: Create common function for Intel ResetTedd Ho-Jeong An
The Intel_Reset command is used to reset the device after downloading the firmware and this is Intel generic command used in both USB and UART. Signed-off-by: Tedd Ho-Jeong An <tedd.an@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: btintel: Create common Intel Version Read functionLoic Poulain
The Intel Version Read command is used to retrieve information about hardware and firmware version/revision of Intel Bluetooth controllers. This is an Intel generic command used in USB and UART drivers. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit (git 2.34.1) at 2025-06-14 05:28:57 +0000