summaryrefslogtreecommitdiff
path: root/drivers/clk
AgeCommit message (Collapse)Author
2020-12-15Merge tag 'pm-5.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These update cpufreq (core and drivers), cpuidle (polling state implementation and the PSCI driver), the OPP (operating performance points) framework, devfreq (core and drivers), the power capping RAPL (Running Average Power Limit) driver, the Energy Model support, the generic power domains (genpd) framework, the ACPI device power management, the core system-wide suspend code and power management utilities. Specifics: - Use local_clock() instead of jiffies in the cpufreq statistics to improve accuracy (Viresh Kumar). - Fix up OPP usage in the cpufreq-dt and qcom-cpufreq-nvmem cpufreq drivers (Viresh Kumar). - Clean up the cpufreq core, the intel_pstate driver and the schedutil cpufreq governor (Rafael Wysocki). - Fix up error code paths in the sti-cpufreq and mediatek cpufreq drivers (Yangtao Li, Qinglang Miao). - Fix cpufreq_online() to return error codes instead of success (0) in all cases when it fails (Wang ShaoBo). - Add mt8167 support to the mediatek cpufreq driver and blacklist mt8516 in the cpufreq-dt-platdev driver (Fabien Parent). - Modify the tegra194 cpufreq driver to always return values from the frequency table as the current frequency and clean up that driver (Sumit Gupta, Jon Hunter). - Modify the arm_scmi cpufreq driver to allow it to discover the power scale present in the performance protocol and provide this information to the Energy Model (Lukasz Luba). - Add missing MODULE_DEVICE_TABLE to several cpufreq drivers (Pali Rohár). - Clean up the CPPC cpufreq driver (Ionela Voinescu). - Fix NVMEM_IMX_OCOTP dependency in the imx cpufreq driver (Arnd Bergmann). - Rework the poling interval selection for the polling state in cpuidle (Mel Gorman). - Enable suspend-to-idle for PSCI OSI mode in the PSCI cpuidle driver (Ulf Hansson). - Modify the OPP framework to support empty (node-less) OPP tables in DT for passing dependency information (Nicola Mazzucato). - Fix potential lockdep issue in the OPP core and clean up the OPP core (Viresh Kumar). - Modify dev_pm_opp_put_regulators() to accept a NULL argument and update its users accordingly (Viresh Kumar). - Add frequency changes tracepoint to devfreq (Matthias Kaehlcke). - Add support for governor feature flags to devfreq, make devfreq sysfs file permissions depend on the governor and clean up the devfreq core (Chanwoo Choi). - Clean up the tegra20 devfreq driver and deprecate it to allow another driver based on EMC_STAT to be used instead of it (Dmitry Osipenko). - Add interconnect support to the tegra30 devfreq driver, allow it to take the interconnect and OPP information from DT and clean it up (Dmitry Osipenko). - Add interconnect support to the exynos-bus devfreq driver along with interconnect properties documentation (Sylwester Nawrocki). - Add suport for AMD Fam17h and Fam19h processors to the RAPL power capping driver (Victor Ding, Kim Phillips). - Fix handling of overly long constraint names in the powercap framework (Lukasz Luba). - Fix the wakeup configuration handling for bridges in the ACPI device power management core (Rafael Wysocki). - Add support for using an abstract scale for power units in the Energy Model (EM) and document it (Lukasz Luba). - Add em_cpu_energy() micro-optimization to the EM (Pavankumar Kondeti). - Modify the generic power domains (genpd) framwework to support suspend-to-idle (Ulf Hansson). - Fix creation of debugfs nodes in genpd (Thierry Strudel). - Clean up genpd (Lina Iyer). - Clean up the core system-wide suspend code and make it print driver flags for devices with debug enabled (Alex Shi, Patrice Chotard, Chen Yu). - Modify the ACPI system reboot code to make it prepare for system power off to avoid confusing the platform firmware (Kai-Heng Feng). - Update the pm-graph (multiple changes, mostly usability-related) and cpupower (online and offline CPU information support) PM utilities (Todd Brandt, Brahadambal Srinivasan)" * tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (86 commits) cpufreq: Fix cpufreq_online() return value on errors cpufreq: Fix up several kerneldoc comments cpufreq: stats: Use local_clock() instead of jiffies cpufreq: schedutil: Simplify sugov_update_next_freq() cpufreq: intel_pstate: Simplify intel_cpufreq_update_pstate() PM: domains: create debugfs nodes when adding power domains opp: of: Allow empty opp-table with opp-shared dt-bindings: opp: Allow empty OPP tables media: venus: dev_pm_opp_put_*() accepts NULL argument drm/panfrost: dev_pm_opp_put_*() accepts NULL argument drm/lima: dev_pm_opp_put_*() accepts NULL argument PM / devfreq: exynos: dev_pm_opp_put_*() accepts NULL argument cpufreq: qcom-cpufreq-nvmem: dev_pm_opp_put_*() accepts NULL argument cpufreq: dt: dev_pm_opp_put_regulators() accepts NULL argument opp: Allow dev_pm_opp_put_*() APIs to accept NULL opp_table opp: Don't create an OPP table from dev_pm_opp_get_opp_table() cpufreq: dt: Don't (ab)use dev_pm_opp_get_opp_table() to create OPP table opp: Reduce the size of critical section in _opp_kref_release() PM / EM: Micro optimization in em_cpu_energy cpufreq: arm_scmi: Discover the power scale in performance protocol ...
2020-12-11Merge tag 'devfreq-next-for-5.11' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux Pull devfreq updates for 5.11 from Chanwoo Choi: 1. Update devfreq core - Add new devfreq_frequency tracepoint to show the frequency change information. - Add governor feature flag. The devfreq governor is able to set the specific flag in order to support a non-common feature. For example, if the governor supports the 'immutable' feature, don't allow user space to change the governor via sysfs. - Add governor sysfs attribute flag for each sysfs file. Prior to that the devfreq subsystem allowed all of the sysfs files to be accessed regardless of the governor type. But some sysfs fils are not supported by specific devfreq governors. In order to only allow the sysfs files supported by the governor to be accessed, clarify the access permissions of sysfs attributes according to the governor. When adding the devfreq governor, specify the available attribute information by using DEVFREQ_GOV_ATTR_* symbols. The user can read or write the sysfs attributes in accordance to the specified access permissions. - Clean-up the code to reduce duplication for the devfreq tracepoint and to remove redundant governor_name field from struct devfreq. 2. Update exynos-bus.c devfreq driver - Add interconnect API support to the Samsung Exynos Bus Frequency driver, exynos-bus.c. Complementing the devfreq driver with interconnect functionality allows to ensure that the QoS requirements regarding devices accessing the system memory (e.g. video processing devices) will be met and allows to avoid issues like DMA underrun. 3. Update tegra devfreq driver - Add interconnect support and OPP interface to tegra30-devfreq.c. Also, it is to guarantee the QoS requirement of some devices like the display controller. - Move tegra20-devfreq.c from drivers/devfreq/ into drivers/memory/tegra/ in order to use the more proper monitoring feature such as EMC_STAT which is located in drivers/memory/tegra/. - Separate the configuration information for different SoCs in tegra30-devfrqe.c. The tegra30-devfreq.c had been supporting both tegra30-actmon and tegra124-actmon devices. In order to use the more correct configuration data, separate them. - Use dev_err_probe() to handle the deferred probe error in tegra30-devfreq.c. 4. Pull the request of 'Tegra SoC and clock controller changes for v5.11' sent by Krzysztof Kozlowski <krzk@kernel.org> in order to avoid a build error." * tag 'devfreq-next-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux: PM / devfreq: tegra30: Separate configurations per-SoC generation PM / devfreq: tegra30: Support interconnect and OPPs from device-tree PM / devfreq: tegra20: Deprecate in a favor of emc-stat based driver PM / devfreq: exynos-bus: Add registration of interconnect child device dt-bindings: devfreq: Add documentation for the interconnect properties soc/tegra: fuse: Add stub for tegra_sku_info soc/tegra: fuse: Export tegra_read_ram_code() clk: tegra: Export Tegra20 EMC kernel symbols PM / devfreq: tegra30: Silence deferred probe error PM / devfreq: tegra20: Relax Kconfig dependency PM / devfreq: tegra20: Silence deferred probe error PM / devfreq: Remove redundant governor_name from struct devfreq PM / devfreq: Add governor attribute flag for specifc sysfs nodes PM / devfreq: Add governor feature flag PM / devfreq: Add tracepoint for frequency changes PM / devfreq: Unify frequency change to devfreq_update_target func trace: events: devfreq: Use fixed indentation size to improve readability
2020-12-10clk: tegra: Fix duplicated SE clock entryDmitry Osipenko
The periph_clks[] array contains duplicated entry for Security Engine clock which was meant to be defined for T210, but it wasn't added properly. This patch corrects the T210 SE entry and fixes the following error message on T114/T124: "Tegra clk 127: register failed with -17". Fixes: dc37fec48314 ("clk: tegra: periph: Add new periph clks and muxes for Tegra210") Tested-by Nicolas Chauvet <kwizart@gmail.com> Reported-by Nicolas Chauvet <kwizart@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20201025224212.7790-1-digetx@gmail.com Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-10clk: qcom: rpmh: add support for SM8350 rpmh clocksVinod Koul
This adds the RPMH clocks present in SM8350 SoC Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20201208064702.3654324-3-vkoul@kernel.org [sboyd@kernel.org: Move sdx55 to the right place] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-10clk: qcom: lpasscc: Introduce pm autosuspend for SC7180Taniya Das
The LPASSCC driver's suspend/resume is invoked multiple number of times and thus allow the device to autosuspend for 500ms. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lore.kernel.org/r/1605890417-721-1-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-10clk: qcom: gcc-sc7180: Add 50 MHz clock rate for SDC2Douglas Anderson
50 MHz is an incredibly common clock rate for SD cards to run at. It's "high speed" mode in SD (not very fast these days, but it used to be) or: #define HIGH_SPEED_MAX_DTR 50000000 If we don't support this then older "high speed" cards can only run at 25 MHz or at half their normal speed. There doesn't seem to be any reason to skip this clock rate, so add it. Fixes: 17269568f726 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180") Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20201210102234.2.I26dcc0cee374f5571d9929c9985f463773167e68@changeid Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-10clk: qcom: gcc-sc7180: Use floor ops for sdcc clksDouglas Anderson
I would repeat the same commit message that was in commit 5e4b7e82d497 ("clk: qcom: gcc-sdm845: Use floor ops for sdcc clks") but it seems silly to do so when you could just go read that commit. NOTE: this is actually extra terrible because we're missing the 50 MHz rate in the table (see the next patch AKA ("clk: qcom: gcc-sc7180: Add 50 MHz clock rate for SDC2")). That means then when you run an older SD card it'll try to clock it at 100 MHz when it's only specced to run at 50 MHz max. As you can probably guess that doesn't work super well. Signed-off-by: Douglas Anderson <dianders@chromium.org> Fixes: 17269568f726 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180") Link: https://lore.kernel.org/r/20201210102234.1.I096779f219625148900fc984dd0084ed1ba87c7f@changeid Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-10clk: scpi: mark scpi_clk_match as maybe unusedKrzysztof Kozlowski
The scpi_clk_match (struct of_device_id) is referenced only with CONFIG_OF builds thus mark it as __maybe_unused: drivers/clk/clk-scpi.c:132:34: warning: ‘scpi_clk_match’ defined but not used [-Wunused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201103162435.13689-8-krzk@kernel.org Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-10clk: pwm: drop of_match_ptr from of_device_id tableKrzysztof Kozlowski
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might be not relevant here). This fixes compile warning (!CONFIG_OF && !CONFIG_MODULES): drivers/clk/clk-pwm.c:139:34: warning: ‘clk_pwm_dt_ids’ defined but not used [-Wunused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201103162435.13689-1-krzk@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-10clk: renesas: sh73a0: Stop using __raw_*() I/O accessorsGeert Uytterhoeven
There is no reason to keep on using the __raw_{read,write}l() I/O accessors in Renesas ARM driver code. Switch to using the plain {read,write}l() I/O accessors, to have a chance that this works on big-endian. Suggested-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20201119125053.4065746-1-geert+renesas@glider.be
2020-12-10clk: renesas: r8a774c0: Add RPC clocksLad Prabhakar
Describe the RPCSRC internal clock and the RPC[D2] clocks derived from it, as well as the RPC-IF module clock, in the RZ/G2E (R8A774C0) CPG/MSSR driver. Add new clk type CLK_TYPE_GEN3_E3_RPCSRC to register rpcsrc as a fixed clock on R-Car Gen3 E3 (and also RZ/G2E which is identical to E3 SoC), parent and the divider is set based on the register value CPG_RPCCKCR[4:3] which has been set prior to booting the kernel. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20201116101002.5986-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-12-10clk: renesas: r8a779a0: Fix R and OSC clocksGeert Uytterhoeven
The R-Car V3U clock driver defines the R and OSC clocks using R-Car Gen3 clock types. However, The R-Car V3U clock driver does not use the R-Car Gen3 clock driver core, hence registering the R and OSC clocks fails: renesas-cpg-mssr e6150000.clock-controller: Failed to register core clock osc: -22 renesas-cpg-mssr e6150000.clock-controller: Failed to register core clock r: -22 Fix this by introducing clock definition macros specific to R-Car V3U. Note that rcar_r8a779a0_cpg_clk_register() already handled the related clock types. Drop the now unneeded include of rcar-gen3-cpg.h. Fixes: 17bcc8035d2d19fc ("clk: renesas: cpg-mssr: Add support for R-Car V3U") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20201109152614.2465483-1-geert+renesas@glider.be
2020-12-10clk: renesas: cpg-mssr: fix kerneldoc of cpg_mssr_privKrzysztof Kozlowski
The struct cpg_mssr_priv missed proper formatting: drivers/clk/renesas/renesas-cpg-mssr.c:142: warning: cannot understand function prototype: 'struct cpg_mssr_priv ' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201103162435.13689-7-krzk@kernel.org Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-12-10clk: renesas: rcar-usb2-clock-sel: Replace devm_reset_control_array_get()Yejune Deng
devm_reset_control_array_get_shared() looks more readable Signed-off-by: Yejune Deng <yejune.deng@gmail.com> Link: https://lore.kernel.org/r/1604375093-6451-1-git-send-email-yejune.deng@gmail.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-12-10clk: renesas: r8a774b1: Add RPC clocksBiju Das
Describe the RPCSRC internal clock and the RPC[D2] clocks derived from it, as well as the RPC-IF module clock, in the RZ/G2N (R8A774B1) CPG/MSSR driver. Inspired by commit 94e3935b5756 ("clk: renesas: r8a77980: Add RPC clocks"). Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20201016121709.8447-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-12-10clk: renesas: r8a774a1: Add RPC clocksBiju Das
Describe the RPCSRC internal clock and the RPC[D2] clocks derived from it, as well as the RPC-IF module clock, in the RZ/G2M (R8A774A1) CPG/MSSR driver. Inspired by commit 94e3935b5756 ("clk: renesas: r8a77980: Add RPC clocks"). Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20201016121709.8447-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-12-10clk: renesas: r8a779a0: Add VIN clocksJacopo Mondi
Add definitions of the VIN instance clocks for R-Car V3U. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Link: https://lore.kernel.org/r/20201016111158.17521-5-jacopo+renesas@jmondi.org Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-12-10clk: renesas: r8a779a0: Add CSI4[0-3] clocksJacopo Mondi
Add definitions of the CSI-2 receiver clocks for R-Car V3U. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Link: https://lore.kernel.org/r/20201016111158.17521-2-jacopo+renesas@jmondi.org Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-12-10clk: renesas: r8a779a0: Make rcar_r8a779a0_cpg_clk_register() staticGeert Uytterhoeven
When compiling with clang: drivers/clk/renesas/r8a779a0-cpg-mssr.c:156:21: warning: no previous prototype for function 'rcar_r8a779a0_cpg_clk_register' [-Wmissing-prototypes] struct clk * __init rcar_r8a779a0_cpg_clk_register(struct device *dev, ^ drivers/clk/renesas/r8a779a0-cpg-mssr.c:156:1: note: declare 'static' if the function is not intended to be used outside of this translation unit struct clk * __init rcar_r8a779a0_cpg_clk_register(struct device *dev, ^ static Similarly, with sparse: drivers/clk/renesas/r8a779a0-cpg-mssr.c:156:12: warning: symbol 'rcar_r8a779a0_cpg_clk_register' was not declared. Should it be static? There are no users of rcar_r8a779a0_cpg_clk_register() outside this file, so it should be static. Fixes: 17bcc8035d2d19fc ("clk: renesas: cpg-mssr: Add support for R-Car V3U") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20200924111808.15358-1-geert+renesas@glider.be
2020-12-09Merge tag 'samsung-drivers-5.11-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/drivers Samsung SoC drivers changes for v5.11, part two 1. Mark PM functions of newly added clkout module as unused to silence !CONFIG_PM warnings. 2. Initialize ChipID driver later - in arch initcall. * tag 'samsung-drivers-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: clk: samsung: mark PM functions as __maybe_unused soc: samsung: exynos-chipid: initialize later - with arch_initcall soc: samsung: exynos-chipid: order list of SoCs by name Link: https://lore.kernel.org/r/20201207074528.4475-1-krzk@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09Merge tag 'omap-for-v5.11/genpd-drivers-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/drivers Driver changes for omaps for genpd for v5.11 merge window This series of changes allows booting am335x with genpd and device tree data without the legacy platform data. Also at least am437x can be booted with gendp with power domain and dts data. The SoC specific dts changes will be a separate pull request. We need the following driver changes merged before the dts changes can be done: - platform code needs a few improvments to probe l4_wkup first for clocks, and to bail out when there is no platform data - ti-sysc driver needs a non-urgent fix for asserting rstctrl reset only after disabling the clocks, to probe modules with no known control registers, and added quirk handling for gpmc devices - omap-prm driver needs a non-urgent fix for reset status bit, support added for pm_clk, and then we add the rest of am335x power domain data - clock driver for am335x needs to keep l3_main clock enabled with genpd for suspend and resume to work - wkup_m3 remoteproc driver needs support added for reset control if available instead of the legacy pdata callbacks - pm33xx driver needs PM runtime support added for genpd The am335x specific driver changes for the clock, wkup_m3, pm33xx and remoteproc drivers are quite trivial and have not caused merge conflicts in Linux next. I did not get acks for these changes except from Santosh but had already pushed out the branch already at that point. So I've added the related driver maintainers to Cc. * tag 'omap-for-v5.11/genpd-drivers-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: remoteproc/wkup_m3: Use reset control driver if available soc: ti: pm33xx: Enable basic PM runtime support for genpd soc: ti: omap-prm: am3: add genpd support for remaining PRM instances soc: ti: omap-prm: Add pm_clk for genpd clk: ti: am33xx: Keep am3 l3 main clock always on for genpd bus: ti-sysc: Implement GPMC debug quirk to drop platform data bus: ti-sysc: Support modules without control registers ARM: OMAP2+: Probe PRCM first to probe l4_wkup with simple-pm-bus ARM: OMAP2+: Check for inited flag bus: ti-sysc: Assert reset only after disabling clocks soc: ti: omap-prm: Do not check rstst bit on deassert if already deasserted bus: ti-sysc: Fix bogus resetdone warning on enable for cpsw bus: ti-sysc: Fix reset status check for modules with quirks ARM: OMAP2+: Fix missing select PM_GENERIC_DOMAINS_OF ARM: OMAP2+: Fix location for select PM_GENERIC_DOMAINS Link: https://lore.kernel.org/r/pull-1606806458-694517@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-07clk: qcom: Add GDSC support for SDX55 GCCManivannan Sadhasivam
Add GDSC support to control the power supply of power domains in SDX55 GCC. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20201126072844.35370-7-manivannan.sadhasivam@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-07clk: qcom: Add support for SDX55 RPMh clocksManivannan Sadhasivam
Add support for following clocks maintained by RPMh in SDX55 SoCs. * BI TCXO * RF_CLK1 * RF_CLK1_AO * RF_CLK2 * RF_CLK2_AO * QPIC (Qualcomm Technologies, Inc. Parallel Interface Controller) Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20201126072844.35370-5-manivannan.sadhasivam@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-07clk: qcom: Add SDX55 GCC supportNaveen Yadav
Add Global Clock Controller (GCC) support for SDX55 SoCs from Qualcomm. Signed-off-by: Naveen Yadav <naveenky@codeaurora.org> [mani: converted to parent_data, commented critical clocks, cleanups] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20201126072844.35370-3-manivannan.sadhasivam@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-07clk: fsl-flexspi: new driverMichael Walle
Add support for the FlexSPI clock on Freescale Layerscape SoCs. The clock is a simple divider based one and is located inside the device configuration space (DCFG). This will allow switching the SCK frequencies for the FlexSPI interface on the LS1028A and the LX2160A. Signed-off-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20201108185113.31377-8-michael@walle.cc [sboyd@kernel.org: Drop modalias, add module table] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-07clk: divider: add devm_clk_hw_register_divider_table()Michael Walle
This will simplify drivers which would only unregister the clk in their remove() op. Signed-off-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20201108185113.31377-6-michael@walle.cc Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-07clk: qoriq: provide constants for the typeMichael Walle
To avoid future mistakes in the device tree for the clockgen module, add constants for the clockgen subtype as well as a macro for the PLL divider. Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201108185113.31377-4-michael@walle.cc Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-07clk: fsl-sai: use devm_clk_hw_register_composite_pdata()Michael Walle
Simplify the driver by using that helper and drop the remove() function. Signed-off-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20201105192746.19564-4-michael@walle.cc Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-07clk: composite: add devm_clk_hw_register_composite_pdata()Michael Walle
This will simplify drivers which would only unregister the clk in their remove() op. Signed-off-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20201105192746.19564-3-michael@walle.cc Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-07clk: fsl-sai: fix memory leakMichael Walle
If the device is removed we don't unregister the composite clock. Fix that. Fixes: 9cd10205227c ("clk: fsl-sai: new driver") Signed-off-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20201105192746.19564-2-michael@walle.cc Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-07clk: qoriq: Add platform dependenciesGeert Uytterhoeven
The Freescale QorIQ clock controller is only present on Freescale E500MC and Layerscape SoCs. Add platform dependencies to the CLK_QORIQ config symbol, to avoid asking the user about it when configuring a kernel without E500MC or Layerscape support. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Li Yang <leoyang.li@nxp.com> Link: https://lore.kernel.org/r/20201110154750.3285411-1-geert+renesas@glider.be Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-07clk: renesas: r9a06g032: Drop __packed for portabilityGeert Uytterhoeven
The R9A06G032 clock driver uses an array of packed structures to reduce kernel size. However, this array contains pointers, which are no longer aligned naturally, and cannot be relocated on PPC64. Hence when compile-testing this driver on PPC64 with CONFIG_RELOCATABLE=y (e.g. PowerPC allyesconfig), the following warnings are produced: WARNING: 136 bad relocations c000000000616be3 R_PPC64_UADDR64 .rodata+0x00000000000cf338 c000000000616bfe R_PPC64_UADDR64 .rodata+0x00000000000cf370 ... Fix this by dropping the __packed attribute from the r9a06g032_clkdesc definition, trading a small size increase for portability. This increases the 156-entry clock table by 1 byte per entry, but due to the compiler generating more efficient code for unpacked accesses, the net size increase is only 76 bytes (gcc 9.3.0 on arm32). Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 4c3d88526eba2143 ("clk: renesas: Renesas R9A06G032 clock driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20201130085743.1656317-1-geert+renesas@glider.be Tested-by: Stephen Rothwell <sfr@canb.auug.org.au> # PowerPC allyesconfig build Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-07clk: imx: scu: fix MXC_CLK_SCU module build breakDong Aisheng
This issue can be reproduced by having a kernel config with CONFIG_IMX_MBOX=m and CONFIG_MXC_CLK_SCU=m. It's caused by the Makefile wanting to build clk-scu.o and clk-imx8qxp.o as different targets but that doesn't work (e.g. MXC_CLK_SCU = y while CLK_IMX8QXP = n) "obj-$(CONFIG_MXC_CLK_SCU) += clk-imx-scu.o clk-imx-lpcg-scu.o clk-imx-scu-$(CONFIG_CLK_IMX8QXP) += clk-scu.o clk-imx8qxp.o" Having MXC_CLK_SCU=y/m while CLK_IMX8QXP=n will cause a linker problem like below: LD [M] drivers/clk/imx/clk-imx-scu.o arm-poky-linux-gnueabi-ld: no input files Make MXC_CLK_SCU be un-selectable by users so it can only be selected by the CLK_IMX8QXP option, ensuring the two symbols are built together. Drop COMPILE_TEST too because this option isn't selectable anymore. We can remove it from MXC_CLK_SCU because CLK_IMX8QXP selects MXC_CLK_SCU which already has COMPILE_TEST. Fixes: e0d0d4d86c766 ("clk: imx8qxp: Support building i.MX8QXP clock driver as module") Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Link: https://lore.kernel.org/r/20201130084624.21113-1-aisheng.dong@nxp.com [sboyd@kernel.org: Rework commit text] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-05clk: samsung: mark PM functions as __maybe_unusedArnd Bergmann
The use of SIMPLE_DEV_PM_OPS() means that the suspend/resume functions are now unused when CONFIG_PM is disabled: drivers/clk/samsung/clk-exynos-clkout.c:219:12: error: 'exynos_clkout_resume' defined but not used [-Werror=unused-function] 219 | static int exynos_clkout_resume(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~ drivers/clk/samsung/clk-exynos-clkout.c:210:12: error: 'exynos_clkout_suspend' defined but not used [-Werror=unused-function] 210 | static int exynos_clkout_suspend(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~~ Mark them as __maybe_unused to shut up the otherwise harmless warning. Fixes: 9484f2cb8332 ("clk: samsung: exynos-clkout: convert to module driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20201204091616.4128366-1-arnd@kernel.org Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-11-30clk: imx: scu: remove the calling of device_is_boundDong Aisheng
The device_is_bound() is invisible to drivers when built as modules. It's also not aimed to be used by drivers according to Greg K.H. Let's remove it from clk-scu driver and find another way to do proper driver loading sequence. Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Stephen Boyd <sboyd@kernel.org> Fixes: 77d8f3068c63 ("clk: imx: scu: add two cells binding support") Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-29clk: rockchip: fix i2s gate bits on rk3066 and rk3188Johan Jonker
The Rockchip PX2/RK3066 uses these bits in CRU_CLKGATE7_CON: hclk_i2s_8ch_gate_en bit 4 (dtsi: i2s0) hclk_i2s0_2ch_gate_en bit 2 (dtsi: i2s1) hclk_i2s1_2ch_gate_en bit 3 (dtsi: i2s2) The Rockchip PX3/RK3188 uses this bit in CRU_CLKGATE7_CON: hclk_i2s_2ch_gate_en bit 2 (dtsi: i2s0) The bits got somehow mixed up in the clk-rk3188.c file. The labels in the dtsi files are not suppose to change. The sclk and hclk names should match for "trace_event=clk_disable,clk_enable", so remove GATE HCLK_I2S0 from the common clock tree and fix the bits in the rk3066 and rk3188 clock tree. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20201118135822.9582-3-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-11-29clk: rockchip: add CLK_SET_RATE_PARENT to sclk for rk3066a i2s and uart clocksJohan Jonker
Add CLK_SET_RATE_PARENT to sclk for rk3066a i2s and uart clocks, so that the parent COMPOSITE_FRACMUX and COMPOSITE_NOMUX also update. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20201118135822.9582-2-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-11-29clk: rockchip: Remove redundant null check before clk_prepare_enableXu Wang
Because clk_prepare_enable() already checked NULL clock parameter, so the additional check is unnecessary, just remove it. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20201127090551.50254-1-vulab@iscas.ac.cn Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-11-27clk: qcom: Kconfig: Fix spelling mistake "dyanmic" -> "dynamic"Colin Ian King
There is a spelling mistake in the Kconfig help text. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20201126232400.15011-1-colin.king@canonical.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-11-26Merge tag 'memory-controller-drv-tegra-5.11-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers Memory controller drivers for v5.11 - Tegra SoC There is a bigger work from Dmitry Osipenko around Tegra SoC memory controller drivers, mostly towards adding interconnect support and integration with devfreq. This work touches all Tegra memory controller drivers and also few other SoC-related parts. It's not yet finished but the intermediate stage seems ready to merge. Beside that Tegra 210 memory controller got few fixes and received new swgroups (work of Nicolin Chen). * tag 'memory-controller-drv-tegra-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl: (38 commits) memory: tegra30-emc: Remove unnecessary of_node_put in tegra_emc_probe memory: tegra: Complete tegra210_swgroups memory: tegra30-emc: Continue probing if timings are missing in device-tree memory: tegra30-emc: Make driver modular memory: tegra30: Add FIFO sizes to memory clients memory: tegra20-emc: Add devfreq support memory: tegra20-emc: Remove IRQ number from error message memory: tegra20-emc: Factor out clk initialization memory: tegra20-emc: Use dev_pm_opp_set_clkname() memory: tegra: Correct stub of devm_tegra_memory_controller_get() memory: tegra20: Support interconnect framework memory: tegra20-emc: Continue probing if timings are missing in device-tree memory: tegra20-emc: Make driver modular memory: tegra-mc: Add interconnect framework memory: tegra: Add missing latency allowness entry for Page Table Cache memory: tegra: Remove superfluous error messages around platform_get_irq() memory: tegra: Use devm_platform_ioremap_resource() memory: tegra: Add and use devm_tegra_memory_controller_get() dt-bindings: host1x: Document new interconnect properties dt-bindings: tegra30-actmon: Document OPP and interconnect properties ... Link: https://lore.kernel.org/r/20201126191241.23302-1-krzk@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-26clk: tegra: bpmp: Clamp clock rates on requestsSivaram Nair
BPMP firmware ABI expects the rate inputs in int64_t. However, tegra_bpmp_clk_round_rate() and tegra_bpmp_clk_set_rate() functions directly assign 'unsigned long' inputs to a int64_t value causing unexpected rounding errors. Fix this by clipping the input rate to S64_MAX. Signed-off-by: Sivaram Nair <sivaramn@nvidia.com> [mperttunen: slight cleanup] Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by: Sivaram Nair <sivaramn@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26clk: meson: g12a: add MIPI DSI Host Pixel ClockNeil Armstrong
This adds the MIPI DSI Host Pixel Clock, unlike AXG, the pixel clock can be different from the VPU ENCL output clock to feed the DSI Host controller with a different clock rate. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20201126141600.2084586-3-narmstrong@baylibre.com
2020-11-24clk: qcom: rpmh: Add CE clock on sdm845.Thara Gopinath
Qualcomm CE clock resource that is managed by BCM is required by crypto driver to access the core clock. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> Link: https://lore.kernel.org/r/20201119155233.3974286-3-thara.gopinath@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-11-23clk: samsung: Prevent potential endless loop in the PLL opsSylwester Nawrocki
The PLL status polling loops in the set_rate callbacks of some PLLs have no timeout detection and may become endless loops when something goes wrong with the PLL. For some PLLs there is already the ktime API based timeout detection, but it will not work in all conditions when .set_rate gets called. In particular, before the clocksource is initialized or when the timekeeping is suspended. This patch adds a common helper with the PLL status bit polling and timeout detection. For conditions where the timekeeping API should not be used a simple readl_relaxed/cpu_relax() busy loop is added with the iterations limit derived from measurements of readl_relaxed() execution time for various PLL types and Exynos SoCs variants. Actual PLL lock time depends on the P divider value, the VCO frequency and a constant PLL type specific LOCK_FACTOR and can be calculated as lock_time = Pdiv * LOCK_FACTOR / VCO_freq For the ktime API use cases a common timeout value of 20 ms is applied for all the PLLs with an assumption that maximum possible value of Pdiv is 64, maximum possible LOCK_FACTOR value is 3000 and minimum VCO frequency is 24 MHz. Link: https://lore.kernel.org/r/20201120155731.26898-1-s.nawrocki@samsung.com Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2020-11-23clk: samsung: Allow compile testing of Exynos, S3C64xx and S5Pv210Krzysztof Kozlowski
So far all Exynos, S3C64xx and S5Pv210 clock units were selected by respective SOC/ARCH Kconfig option. On a kernel built for selected SoCs, this allowed to build only limited set of matching clock drivers. However compile testing was not possible in such case as Makefile object depends on SOC/ARCH option. Add separate Kconfig options for each of them to be able to compile test. Link: https://lore.kernel.org/r/20201119164509.754851-1-krzk@kernel.org Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2020-11-23clk: meson: enable building as modulesKevin Hilman
Make it possible to build all clk drivers as modules, but default remains built-in. No functional changes. Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20201118191405.36798-1-khilman@baylibre.com
2020-11-23clk: meson: Kconfig: fix dependency for G12AKevin Hilman
When building only G12A, ensure that VID_PLL_DIV clock driver is selected, otherwise results in this build error: ERROR: modpost: "meson_vid_pll_div_ro_ops" [drivers/clk/meson/g12a.ko] undefined! Fixes: 085a4ea93d54 ("clk: meson: g12a: add peripheral clock controller") Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20201118190930.34352-1-khilman@baylibre.com
2020-11-23clk: meson: axg: add MIPI DSI Host clockNeil Armstrong
This adds the MIPI DSI Host clock, used to measure the signal timings (ENC VSYNC or DW-MIPI-DSI eDPI timings). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20200915124553.8056-5-narmstrong@baylibre.com
2020-11-23clk: meson: axg: add Video ClocksNeil Armstrong
Add the clocks entries used in the video clock path, the clock path is doubled to permit having different synchronized clocks for different parts of the video pipeline. The AXG only has a single ENCL CTS clock and even if VCLK exist along VCLK2, only VCLK2 is used since it clocks the MIPI DSI IP directly. All dividers are flagged with CLK_GET_RATE_NOCACHE, and all gates are flagged with CLK_IGNORE_UNUSED since they are currently directly handled by the Meson DRM Driver. Once the DRM Driver is fully migrated to using the Common Clock Framework to handle the video clock tree, the CLK_GET_RATE_NOCACHE and CLK_IGNORE_UNUSED will be dropped. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20200915124553.8056-4-narmstrong@baylibre.com
2020-11-20clk: tegra: Do not return 0 on failureNicolin Chen
Return values from read_dt_param() will be either TRUE (1) or FALSE (0), while dfll_fetch_pwm_params() returns 0 on success or an ERR code on failure. So this patch fixes the bug of returning 0 on failure. Fixes: 36541f0499fe ("clk: tegra: dfll: support PWM regulator control") Cc: <stable@vger.kernel.org> Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
generated by cgit (git 2.34.1) at 2025-04-30 19:16:00 +0000