summaryrefslogtreecommitdiff
path: root/drivers/dma/Makefile
AgeCommit message (Collapse)Author
2024-12-02dmaengine: Move AMD PTDMA driver to amd directoryBasavaraj Natikar
PTDMA driver is the AMD DMA driver, and newer AMD platforms support newer DMA engines. Hence, move the current drivers to the AMD directory. This would also mean that future driver submissions to the AMD DMA driver will also land in the AMD-specific directory. Reviewed-by: Raju Rangoju <Raju.Rangoju@amd.com> Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Link: https://lore.kernel.org/r/20241025095931.726018-2-Basavaraj.Natikar@amd.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-10-23dmaengine: loongson2-apb: Rename the prefix ls2x to loongson2Binbin Zhou
Since commit e06c43231214 ("dmaengine: Loongson1: Add Loongson-1 APB DMA driver"), the Loongson-1 dma controller was added. Unfortunately their naming has not been standardized, as CPUs belonging to the same Loongson family, we expect to standardize the naming for ease of understanding. Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Link: https://lore.kernel.org/r/20240924064241.2414629-1-zhoubinbin@loongson.cn Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-29dmaengine: Add dma router for pl08x in LPC32XX SoCPiotr Wojtaszczyk
LPC32XX connects few of its peripherals to pl08x DMA thru a multiplexer, this driver allows to route a signal request line thru the multiplexer for given peripheral. Signed-off-by: Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com> Link: https://lore.kernel.org/r/20240628152022.274405-1-piotr.wojtaszczyk@timesys.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-29dmaengine: Loongson1: Add Loongson-1 APB DMA driverKeguang Zhang
Add APB DMA driver for Loongson-1 SoCs. Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com> Link: https://lore.kernel.org/r/20240809-loongson1-dma-v12-2-d9469a4a6b85@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-28dmaengine: amd: qdma: Add AMD QDMA driverNishad Saraf
Adds driver to enable PCIe board which uses AMD QDMA (the Queue-based Direct Memory Access) subsystem. For example, Xilinx Alveo V70 AI Accelerator devices. https://www.xilinx.com/applications/data-center/v70.html The QDMA subsystem is used in conjunction with the PCI Express IP block to provide high performance data transfer between host memory and the card's DMA subsystem. +-------+ +-------+ +-----------+ PCIe | | | | | | Tx/Rx | | | | AXI | | <=======> | PCIE | <===> | QDMA | <====>| User Logic| | | | | | | +-------+ +-------+ +-----------+ The primary mechanism to transfer data using the QDMA is for the QDMA engine to operate on instructions (descriptors) provided by the host operating system. Using the descriptors, the QDMA can move data in both the Host to Card (H2C) direction, or the Card to Host (C2H) direction. The QDMA provides a per-queue basis option whether DMA traffic goes to an AXI4 memory map (MM) interface or to an AXI4-Stream interface. The hardware detail is provided by https://docs.xilinx.com/r/en-US/pg302-qdma Implements dmaengine APIs to support MM DMA transfers. - probe the available DMA channels - use dma_slave_map for channel lookup - use virtual channel to manage dmaengine tx descriptors - implement device_prep_slave_sg callback to handle host scatter gather list Signed-off-by: Nishad Saraf <nishads@amd.com> Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Link: https://lore.kernel.org/r/20240819211948.688786-2-lizhi.hou@amd.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-06-11dmaengine: stm32: New directory for STM32 DMA controllers driversAmelie Delaunay
Gather the STM32 DMA controllers under drivers/dma/stm32/ Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20240531150712.2503554-3-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-05-04dmaengine: fsl-edma: add trace event supportFrank Li
Implement trace event support to enhance logging functionality for register access and the transfer control descriptor (TCD) context. This will enable more comprehensive monitoring and analysis of system activities Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20240425205947.3436501-1-Frank.Li@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-12-21dmaengine: ls2x-apb: New driver for the Loongson LS2X APB DMA controllerBinbin Zhou
The Loongson LS2X APB DMA controller is available on Loongson-2K chips. It is a single-channel, configurable DMA controller IP core based on the AXI bus, whose main function is to integrate DMA functionality on a chip dedicated to carrying data between memory and peripherals in APB bus (e.g. nand). Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Signed-off-by: Yingkun Meng <mengyingkun@loongson.cn> Link: https://lore.kernel.org/r/8df2a0199434fba3535831082966c2442ecf1cae.1702365725.git.zhoubinbin@loongson.cn Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-22dmaengine: fsl-edma: clean up EXPORT_SYMBOL_GPL in fsl-edma-common.cFrank Li
Exported functions in fsl-edma-common.c are only used within fsl-edma.c and mcf-edma.c. Global export is unnecessary. This commit removes all EXPORT_SYMBOL_GPL in fsl-edma-common.c, and renames fsl-edma.c and mcf-edma.c to maintain the same final module names as before, thereby simplifying the codebase. Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20230821161617.2142561-3-Frank.Li@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-01dmaengine: ipu: Remove the driverFabio Estevam
The i.MX3 IPU driver does not support devicetree and i.MX has been converted to a DT-only platform since kernel 5.10. As there is no user for this driver anymore, just remove it. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230729192945.1217206-1-festevam@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-16dmaengine: remove s3c24xx driverArnd Bergmann
The s3c24xx platform was removed and this driver is no longer needed. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-12-02dmaengine: Revert "dmaengine: remove s3c24xx driver"Vinod Koul
This reverts cccc46ae3623 ("dmaengine: remove s3c24xx driver") as it causes regression due to missing header Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-04dmaengine: remove s3c24xx driverArnd Bergmann
The s3c24xx platform was removed and this driver is no longer needed. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221021203329.4143397-14-arnd@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-10-19dmaengine: remove iop-adma driverArnd Bergmann
The iop32x platform was removed, so this driver is no longer needed. Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/20221019150410.3851944-10-arnd@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-09dmaengine: apple-admac: Add Apple ADMAC driverMartin Povišer
Add driver for Audio DMA Controller present on Apple SoCs from the "Apple Silicon" family. Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20220531213615.7822-3-povik+lin@cutebit.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-11dmaengine: tegra: Add tegra gpcdma driverAkhil R
Adding GPC DMA controller driver for Tegra. The driver supports dma transfers between memory to memory, IO peripheral to memory and memory to IO peripheral. Co-developed-by: Pavan Kunapuli <pkunapuli@nvidia.com> Signed-off-by: Pavan Kunapuli <pkunapuli@nvidia.com> Co-developed-by: Rajesh Gumasta <rgumasta@nvidia.com> Signed-off-by: Rajesh Gumasta <rgumasta@nvidia.com> Signed-off-by: Akhil R <akhilrajeev@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20220225132044.14478-3-akhilrajeev@nvidia.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-08-29dmaengine: ptdma: Initial driver for the AMD PTDMASanjay R Mehta
Add support for AMD PTDMA controller. It performs high-bandwidth memory to memory and IO copy operation. Device commands are managed via a circular queue of 'descriptors', each of which specifies source and destination addresses for copying a single buffer of data. Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com> Link: https://lore.kernel.org/r/1629208559-51964-2-git-send-email-Sanju.Mehta@amd.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-07-21dmaengine: dsa: move dsa_bus_type out of idxd driver to standaloneDave Jiang
In preparation for dsa_drv compat support to be built-in, move the bus code to its own compilation unit. A follow-on patch adds the compat implementation. Recall that the compat implementation allows for the deprecated / omnibus dsa_drv binding scheme rather than the idiomatic organization of a full fledged bus driver per driver type. Reviewed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/162637468142.744545.2811632736881720857.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-26dmaengine: remove coh901318 driverArnd Bergmann
The ST-Ericsson U300 platform is getting removed, so this driver is no longer needed. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210120131859.2056308-4-arnd@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-26dmaengine: remove zte zx driverArnd Bergmann
The zte zx platform is getting removed, so this driver is no longer needed. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Jun Nie <jun.nie@linaro.org> Cc: Shawn Guo <shawnguo@kernel.org> Link: https://lore.kernel.org/r/20210120131859.2056308-3-arnd@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-26dmaengine: remove sirfsoc driverArnd Bergmann
The CSR SiRF prima2/atlas platforms are getting removed, so this driver is no longer needed. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Barry Song <baohua@kernel.org> Cc: Barry Song <baohua@kernel.org> Link: https://lore.kernel.org/r/20210120131859.2056308-2-arnd@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-12dmaengine: Add Intel LGM SoC DMA support.Amireddy Mallikarjuna reddy
Add DMA controller driver for Lightning Mountain (LGM) family of SoCs. The main function of the DMA controller is the transfer of data from/to any peripheral to/from the memory. A memory to memory copy capability can also be configured. This ldma driver is used for configure the device and channnels for data and control paths. Signed-off-by: Amireddy Mallikarjuna reddy <mallikarjunax.reddy@linux.intel.com> Link: https://lore.kernel.org/r/5fc54eb7ccfad4f8dd812b66b884054fc55cf050.1606905330.git.mallikarjunax.reddy@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-10-28misc: mic: remove the MIC driversSudeep Dutt
This patch removes the MIC drivers from the kernel tree since the corresponding devices have been discontinued. Removing the dma and char-misc changes in one patch and merging via the char-misc tree is best to avoid any potential build breakage. Cc: Nikhil Rao <nikhil.rao@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Acked-By: Vinod Koul <vkoul@kernel.org> Reviewed-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/8c1443136563de34699d2c084df478181c205db4.1603854416.git.sudeep.dutt@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-02dmaengine: uniphier-xdmac: Add UniPhier external DMA controller driverKunihiko Hayashi
This adds external DMA controller driver implemented in Socionext UniPhier SoCs. This driver supports DMA_MEMCPY and DMA_SLAVE modes. Since this driver does not support the the way to transfer size unaligned to burst width, 'src_maxburst' or 'dst_maxburst' of dma_slave_config must be 1 to transfer arbitrary size. If transfer size is unaligned to burst size, the transfer isn't started and the driver displays an error message. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1582271550-3403-3-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-24dmaengine: hisilicon: Add Kunpeng DMA engine supportZhou Wang
This patch adds a driver for HiSilicon Kunpeng DMA engine. This DMA engine which is an PCIe iEP offers 30 channels, each channel has a send queue, a complete queue and an interrupt to help to do tasks. This DMA engine can do memory copy between memory blocks or between memory and device buffer. Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Zhenfa Qiu <qiuzhenfa@hisilicon.com> Link: https://lore.kernel.org/r/1579155057-80523-1-git-send-email-wangzhou1@hisilicon.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-24dmaengine: idxd: Init and probe for Intel data acceleratorsDave Jiang
The idxd driver introduces the Intel Data Stream Accelerator [1] that will be available on future Intel Xeon CPUs. One of the kernel access point for the driver is through the dmaengine subsystem. It will initially provide the DMA copy service to the kernel. Some of the main functionality introduced with this accelerator are: shared virtual memory (SVM) support, and descriptor submission using Intel CPU instructions movdir64b and enqcmds. There will be additional accelerator devices that share the same driver with variations to capabilities. This commit introduces the probe and initialization component of the driver. [1]: https://software.intel.com/en-us/download/intel-data-streaming-accelerator-preliminary-architecture-specification Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/157965023991.73301.6186843973135311580.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-15dmaengine: plx-dma: Introduce PLX DMA engine PCI driver skeletonLogan Gunthorpe
Some PLX Switches can expose DMA engines via extra PCI functions on the upstream port. Each function will have one DMA channel. This patch is just the core PCI driver skeleton and dma engine registration. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Link: https://lore.kernel.org/r/20200103212021.2881-2-logang@deltatee.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-14dmaengine: sf-pdma: add platform DMA support for HiFive Unleashed A00Green Wan
Add PDMA driver, sf-pdma, to enable DMA engine on HiFive Unleashed Rev A00 board. - Implement dmaengine APIs, support MEM_TO_MEM async copy. - Tested by DMA Test client - Supports 4 channels DMA, each channel has 1 done and 1 err interrupt connected to platform-level interrupt controller (PLIC). - Depends on DMA_ENGINE and DMA_VIRTUAL_CHANNELS The datasheet is here: https://static.dev.sifive.com/FU540-C000-v1.0.pdf Follow the DMAengine controller doc, "./Documentation/driver-api/dmaengine/provider.rst" to implement DMA engine. And use the dma test client in doc, "./Documentation/driver-api/dmaengine/dmatest.rst", to test. Each DMA channel has separate HW regs and support done and error ISRs. 4 channels share 1 done and 1 err ISRs. There's no expander/arbitrator in DMA HW. ------ ------ | |--< done 23 >--|ch 0| | |--< err 24 >--| | (dma0chan0) | | ------ | | ------ | |--< done 25 >--|ch 1| | |--< err 26 >--| | (dma0chan1) |PLIC| ------ | | ------ | |--< done 27 >--|ch 2| | |--< err 28 >--| | (dma0chan2) | | ------ | | ------ | |--< done 29 >--|ch 3| | |--< err 30 >--| | (dma0chan3) ------ ------ Signed-off-by: Green Wan <green.wan@sifive.com> Link: https://lore.kernel.org/r/20191107084955.7580-4-green.wan@sifive.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-18dmaengine: milbeaut-xdmac: Add XDMAC driver for Milbeaut platformsJassi Brar
Driver for Socionext Milbeaut XDMAC controller. The controller only supports Mem-To-Mem transfers over upto 8 configurable channels. Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> Link: https://lore.kernel.org/r/20191015033219.14713-1-jassisinghbrar@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-18dmaengine: milbeaut-hdmac: Add HDMAC driver for Milbeaut platformsJassi Brar
Driver for Socionext Milbeaut HDMAC controller. The controller has upto 8 floating channels, that need a predefined slave-id to work from a set of slaves. Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> Link: https://lore.kernel.org/r/20191015033359.14925-1-jassisinghbrar@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-17dmaengine: fsl-dpaa2-qdma: Add NXP dpaa2 qDMA controller driver for ↵Peng Ma
Layerscape SoCs DPPA2(Data Path Acceleration Architecture 2) qDMA supports virtualized channel by allowing DMA jobs to be enqueued into different work queues. Core can initiate a DMA transaction by preparing a frame descriptor(FD) for each DMA job and enqueuing this job through a hardware portal. DPAA2 components can also prepare a FD and enqueue a DMA job through a hardware portal. The qDMA prefetches DMA jobs through DPAA2 hardware portal. It then schedules and dispatches to internal DMA hardware engines, which generate read and write requests. Both qDMA source data and destination data can be either contiguous or non-contiguous using one or more scatter/gather tables. The qDMA supports global bandwidth flow control where all DMA transactions are stalled if the bandwidth threshold has been reached. Also supported are transaction based read throttling. Add NXP dppa2 qDMA to support some of Layerscape SoCs. such as: LS1088A, LS208xA, LX2, etc. Signed-off-by: Peng Ma <peng.ma@nxp.com> Link: https://lore.kernel.org/r/20190930020440.7754-2-peng.ma@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-30dma: Drop JZ4740 driverPaul Cercueil
The newer and better JZ4780 driver is now used to provide DMA functionality on the JZ4740. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Artur Rojek <contact@artur-rojek.eu> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Paul Burton <paul.burton@mips.com>
2019-06-10dmaengine: Add Synopsys eDMA IP core driverGustavo Pimentel
Add Synopsys PCIe Endpoint eDMA IP core driver to kernel. This IP is generally distributed with Synopsys PCIe Endpoint IP (depends of the use and licensing agreement). This core driver, initializes and configures the eDMA IP using vma-helpers functions and dma-engine subsystem. This driver can be compile as built-in or external module in kernel. To enable this driver just select DW_EDMA option in kernel configuration, however it requires and selects automatically DMA_ENGINE and DMA_VIRTUAL_CHANNELS option too. In order to transfer data from point A to B as fast as possible this IP requires a dedicated memory space containing linked list of elements. All elements of this linked list are continuous and each one describes a data transfer (source and destination addresses, length and a control variable). For the sake of simplicity, lets assume a memory space for channel write 0 which allows about 42 elements. +---------+ | Desc #0 |-+ +---------+ | V +----------+ | Chunk #0 |-+ | CB = 1 | | +----------+ +-----+ +-----------+ +-----+ +----------+ +->| Burst #0 |->| ... |->| Burst #41 |->| llp | | +----------+ +-----+ +-----------+ +-----+ V +----------+ | Chunk #1 |-+ | CB = 0 | | +-----------+ +-----+ +-----------+ +-----+ +----------+ +->| Burst #42 |->| ... |->| Burst #83 |->| llp | | +-----------+ +-----+ +-----------+ +-----+ V +----------+ | Chunk #2 |-+ | CB = 1 | | +-----------+ +-----+ +------------+ +-----+ +----------+ +->| Burst #84 |->| ... |->| Burst #125 |->| llp | | +-----------+ +-----+ +------------+ +-----+ V +----------+ | Chunk #3 |-+ | CB = 0 | | +------------+ +-----+ +------------+ +-----+ +----------+ +->| Burst #126 |->| ... |->| Burst #129 |->| llp | +------------+ +-----+ +------------+ +-----+ Legend: - Linked list, also know as Chunk - Linked list element*, also know as Burst *CB*, also know as Change Bit, it's a control bit (and typically is toggled) that allows to easily identify and differentiate between the current linked list and the previous or the next one. - LLP, is a special element that indicates the end of the linked list element stream also informs that the next CB should be toggle On every last Burst of the Chunk (Burst #41, Burst #83, Burst #125 or even Burst #129) is set some flags on their control variable (RIE and LIE bits) that will trigger the send of "done" interruption. On the interruptions callback, is decided whether to recycle the linked list memory space by writing a new set of Bursts elements (if still exists Chunks to transfer) or is considered completed (if there is no Chunks available to transfer). On scatter-gather transfer mode, the client will submit a scatter-gather list of n (on this case 130) elements, that will be divide in multiple Chunks, each Chunk will have (on this case 42) a limited number of Bursts and after transferring all Bursts, an interrupt will be triggered, which will allow to recycle the all linked list dedicated memory again with the new information relative to the next Chunk and respective Burst associated and repeat the whole cycle again. On cyclic transfer mode, the client will submit a buffer pointer, length of it and number of repetitions, in this case each burst will correspond directly to each repetition. Each Burst can describes a data transfer from point A(source) to point B(destination) with a length that can be from 1 byte up to 4 GB. Since dedicated the memory space where the linked list will reside is limited, the whole n burst elements will be organized in several Chunks, that will be used later to recycle the dedicated memory space to initiate a new sequence of data transfers. The whole transfer is considered has completed when it was transferred all bursts. Currently this IP has a set well-known register map, which includes support for legacy and unroll modes. Legacy mode is version of this register map that has multiplexer register that allows to switch registers between all write and read channels and the unroll modes repeats all write and read channels registers with an offset between them. This register map is called v0. The IP team is creating a new register map more suitable to the latest PCIe features, that very likely will change the map register, which this version will be called v1. As soon as this new version is released by the IP team the support for this version in be included on this driver. According to the logic, patches 1, 2 and 3 should be squashed into 1 unique patch, but for the sake of simplicity of review, it was divided in this 3 patches files. Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCsPeng Ma
NXP Queue DMA controller(qDMA) on Layerscape SoCs supports channel virtuallization by allowing DMA jobs to be enqueued into different command queues. Signed-off-by: Wen He <wen.he_1@nxp.com> Signed-off-by: Jiaheng Fan <jiaheng.fan@nxp.com> Signed-off-by: Peng Ma <peng.ma@nxp.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-11-24dmaengine: uniphier-mdmac: add UniPhier MIO DMAC driverMasahiro Yamada
The MIO DMAC (Media IO DMA Controller) is used in UniPhier LD4, Pro4, and sLD8 SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-09-11dmaengine: fsl-edma: add ColdFire mcf5441x edma supportAngelo Dureghello
This patch adds support for ColdFire mcf5441x-family edma module. The ColdFire edma module is slightly different from fsl-edma, so a new driver is added. But most of the code is common between fsl-edma and mcf-edma so it has been collected into a separate common module fsl-edma-common (patch 1/3). Signed-off-by: Angelo Dureghello <angelo@sysam.it> Tested-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-09-11dmaengine: fsl-edma: extract common fsl-edma code (no changes in behavior ↵Angelo Dureghello
intended) This patch adds a new fsl-edma-common module to allow new mcf-edma module code to use most of the fsl-edma code. Signed-off-by: Angelo Dureghello <angelo@sysam.it> Tested-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-08-09dmaengine: Add Actions Semi Owl family S900 DMA driverManivannan Sadhasivam
Add Actions Semi Owl family S900 DMA driver. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-04-25dmaengine: ti: New directory for Texas Instruments DMA driversPeter Ujfalusi
Collect the Texas Instruments DMA drivers under drivers/dma/ti/ Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-04-10Merge branch 'topic/mtek' into for-linusVinod Koul
2018-03-27dmaengine: mediatek: Add MediaTek High-Speed DMA controller for MT7622 and ↵Sean Wang
MT7623 SoC MediaTek High-Speed DMA controller (HSDMA) on MT7622 and MT7623 SoC has a single ring is dedicated to memory-to-memory transfer through ring based descriptor management. Even though there is only one physical ring available inside HSDMA, the driver can be easily extended to the support of multiple virtual channels processing simultaneously by means of DMA_VIRTUAL_CHANNELS effort. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-03-19dmaengine: Introduce DW AXI DMAC driverEugeniy Paltsev
This patch adds support for the DW AXI DMAC controller. DW AXI DMAC is a part of HSDK development board from Synopsys. In this driver implementation only DMA_MEMCPY transfers are supported. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-11-14Merge tag 'dmaengine-4.15-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: "Updates for this cycle include: - new driver for Spreadtrum dma controller, ST MDMA and DMAMUX controllers - PM support for IMG MDC drivers - updates to bcm-sba-raid driver and improvements to sun6i driver - subsystem conversion for: - timers to use timer_setup() - remove usage of PCI pool API - usage of %p format specifier - minor updates to bunch of drivers" * tag 'dmaengine-4.15-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (49 commits) dmaengine: ti-dma-crossbar: Correct am335x/am43xx mux value type dmaengine: dmatest: warn user when dma test times out dmaengine: Revert "rcar-dmac: use TCRB instead of TCR for residue" dmaengine: stm32_mdma: activate pack/unpack feature dmaengine: at_hdmac: Remove unnecessary 0x prefixes before %pad dmaengine: coh901318: Remove unnecessary 0x prefixes before %pad MAINTAINERS: Step down from a co-maintaner of DW DMAC driver dmaengine: pch_dma: Replace PCI pool old API dmaengine: Convert timers to use timer_setup() dmaengine: sprd: Add Spreadtrum DMA driver dt-bindings: dmaengine: Add Spreadtrum SC9860 DMA controller dmaengine: sun6i: Retrieve channel count/max request from devicetree dmaengine: Build bcm-sba-raid driver as loadable module for iProc SoCs dmaengine: bcm-sba-raid: Use common GPL comment header dmaengine: bcm-sba-raid: Use only single mailbox channel dmaengine: bcm-sba-raid: serialize dma_cookie_complete() using reqs_lock dmaengine: pl330: fix descriptor allocation fail dmaengine: rcar-dmac: use TCRB instead of TCR for residue dmaengine: sun6i: Add support for Allwinner A64 and compatibles arm64: allwinner: a64: Add devicetree binding for DMA controller ...
2017-11-14Merge branch 'topic/sprd' into for-linusVinod Koul
Kconfig and Makefile conflicts so put them in right order (sprd ones after stm ones) Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-24dmaengine: sprd: Add Spreadtrum DMA driverBaolin Wang
This patch adds the DMA controller driver for Spreadtrum SC9860 platform. Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-10-08dmaengine: Add STM32 MDMA driverPierre-Yves MORDRET
This patch adds the driver for the STM32 MDMA controller. Master Direct memory access (MDMA) is used in order to provide high-speed data transfer between memory and memory or between peripherals and memory. MDMA controller provides a master AXI interface for main memory and peripheral registers access (system access port) and a master AHB interface only for Cortex-M7 TCM memory access (TCM access port). MDMA works in conjunction with the standard DMA controllers (DMA1 or DMA2). It offers up to 64 channels, each dedicated to managing memory access requests from one of the DMA stream memory buffer or other peripherals (w/ integrated FIFO). Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-09-27dmaengine: Add STM32 DMAMUX driverPierre-Yves MORDRET
This patch implements the STM32 DMAMUX driver. The DMAMUX request multiplexer allows routing a DMA request line between the peripherals and the DMA controllers of the product. The routing function is ensured by a programmable multi-channel DMA request line multiplexer. Each channel selects a unique DMA request line, unconditionally or synchronously with events from its DMAMUX synchronization inputs. The DMAMUX may also be used as a DMA request generator from programmable events on its input trigger signals Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-07-18dmaengine: Add driver for Altera / Intel mSGDMA IP coreStefan Roese
This driver adds support for the Altera / Intel modular Scatter-Gather Direct Memory Access (mSGDMA) intellectual property (IP) to the Linux DMAengine subsystem. Currently it supports the following op modes: - DMA_MEMCPY - DMA_SG - DMA_SLAVE This implementation has been tested on an Altera Cyclone FPGA connected via PCIe, both on an ARM and an x86 platform. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-05-16dmaengine: Add Broadcom SBA RAID driverAnup Patel
The Broadcom stream buffer accelerator (SBA) provides offloading capabilities for RAID operations. This SBA offload engine is accessible via Broadcom SoC specific ring manager. This patch adds Broadcom SBA RAID driver which provides one DMA device with RAID capabilities using one or more Broadcom SoC specific ring manager channels. The SBA RAID driver in its current shape implements memcpy, xor, and pq operations. Signed-off-by: Anup Patel <anup.patel@broadcom.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
generated by cgit (git 2.34.1) at 2025-04-18 01:50:49 +0000