summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/amdgpu_dm
AgeCommit message (Collapse)Author
2024-05-15Merge tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm updates from Dave Airlie: "This is the main pull request for the drm subsystems for 6.10. In drivers the main thing is a new driver for ARM Mali firmware based GPUs, otherwise there are a lot of changes to amdgpu/xe/i915/msm and scattered changes to everything else. In the core a bunch of headers and Kconfig was refactored, along with the addition of a new panic handler which is meant to provide a user friendly message when a panic happens and graphical display is enabled. New drivers: - panthor: ARM Mali/Immortalis CSF-based GPU driver Core: - add a CONFIG_DRM_WERROR option - make more headers self-contained - grab resv lock in pin/unpin - fix vmap resv locking - EDID/eDP panel matching - Kconfig cleanups - DT sound bindings - Add SIZE_HINTS property for cursor planes - Add struct drm_edid_product_id and helpers. - Use drm device based logging in more drm functions. - drop seq_file.h from a bunch of places - use drm_edid driver conversions dp: - DP Tunnel documentation - MST read sideband cap - Adaptive sync SDP prep work ttm: - improve placement for TTM BOs in idle/busy handling panic: - Fixes for drm-panic, and option to test it. - Add drm panic to simpledrm, mgag200, imx, ast bridge: - improve init ordering - adv7511: allow GPIO pin sharing - tc358775: add tc358675 support panel: - AUO B120XAN01.0 - Samsung s6e3fa7 - BOE NT116WHM-N44 - CMN N116BCA-EA1, - CrystalClear CMT430B19N00 - Startek KD050HDFIA020-C020A - powertip PH128800T006-ZHC01 - Innolux G121X1-L03 - LG sw43408 - Khadas TS050 V2 - EDO RM69380 OLED - CSOT MNB601LS1-1 amdgpu: - HDCP/ODM/RAS fixes - Devcoredump improvements - Expose VCN activity via sysfs - SMY 13.0.x updates - Enable fast updates on DCN 3.1.4 - Add dclk and vclk reporting on additional devices - Add ACA RAS infrastructure - Implement TLB flush fence - EEPROM handling fixes - SMUIO 14.0.2 support - SMU 14.0.1 Updates - SMU 14.0.2 support - Sync page table freeing with TLB flushes - DML2 refactor - DC debug improvements - DCN 3.5.x Updates - GPU reset fixes - HDP fix for second GFX pipe on GC 10.x - Enable secondary GFX pipe on GC 10.3 - Refactor and clean up BACO/BOCO/BAMACO handling - Remove invalid TTM resource start check - UAF fix in VA IOCTL - GPUVM page fault redirection to secondary IH rings for IH 6.x - Initial support for mapping kernel queues via MES - Fix VRAM memory accounting amdkfd: - MQD handling cleanup - Preemption handling fixes for XCDs - TLB flush fix for GC 9.4.2 - Properly clean up workqueue during module unload - Fix memory leak process create failure - Range check CP bad op exception targets to avoid reporting invalid exceptions to userspace - Fix eviction fence handling - Fix leak in GPU memory allocation failure case - DMABuf import handling fix - Enable SQ watchpoint for gfx10 i915: - Adding new DG2 PCI ID - add context hints for GT frequency - enable only one CCS for compute workloads - new workarounds - Fix UAF on destroy against retire race and remove two earlier partial fixes - Limit the reserved VM space to only the platforms that need it - Fix gt reset with GuC submission is disable - Add and use gt_to_guc() wrapper i915/xe display: - Lunar Lake display enabling, including cdclk and other refactors - BIOS/VBT/opregion related refactor - Digital port related refactor/clean-up - Fix 2s boot time regression on DP panel replay init - Remove duplication on audio enable/disable on SDVO and g4x+ DP - Disable AuxCCS framebuffers if built for Xe - Make crtc disable more atomic - Increase DP idle pattern wait timeout to 2ms - Start using container_of_const() for some extra const safety - Fix Jasper Lake boot freeze - Enable MST mode for 128b/132b single-stream sideband - Enable Adaptive Sync SDP Support for DP - Fix MTL supported DP rates - removal of UHBR13.5 - PLL refactoring - Limit eDP MSO pipe only for display version 20 - More display refactor towards independence from i915 dev_priv - Convert i915/xe fbdev to DRM client - More initial work to make display code more independent from i915 xe: - improved error capture - clean up some uAPI leftovers - devcoredump update - Add BMG mocs table - Handle GSCCS ER interrupt - Implement xe2- and GuC workarounds - struct xe_device cleanup - Hwmon updates - Add LRC parsing for more GPU instruction - Increase VM_BIND number of per-ioctl Ops - drm/xe: Add XE_BO_GGTT_INVALIDATE flag - Initial development for SR-IOV support - Add new PCI IDs to DG2 platform - Move userptr over to start using hmm_range_fault msm: - Switched to generating register header files during build process instead of shipping pre-generated headers - Merged DPU and MDP4 format databases. - DP: - Stop using compat string to distinguish DP and eDP cases - Added support for X Elite platform (X1E80100) - Reworked DP aux/audio support - Added SM6350 DP to the bindings - GPU: - a7xx perfcntr reg fixes - MAINTAINERS updates - a750 devcoredump support radeon: - Silence UBSAN warnings related to flexible arrays nouveau: - move some uAPI objects to uapi headers omapdrm: - console fix ast: - add i2c polling qaic: - add debugfs entries exynos: - fix platform_driver .owner - drop cleanup code mediatek: - Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe() - Add GAMMA 12-bit LUT support for MT8188 - Rename mtk_drm_* to mtk_* - Drop driver owner initialization - Correct calculation formula of PHY Timing" * tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel: (1477 commits) drm/xe/ads: Use flexible-array drm/xe: Use ordered WQ for G2H handler drm/msm/gen_header: allow skipping the validation drm/msm/a6xx: Cleanup indexed regs const'ness drm/msm: Add devcoredump support for a750 drm/msm: Adjust a7xx GBIF debugbus dumping drm/msm: Update a6xx registers XML drm/msm: Fix imported a750 snapshot header for upstream drm/msm: Import a750 snapshot registers from kgsl MAINTAINERS: Add Konrad Dybcio as a reviewer for the Adreno driver MAINTAINERS: Add a separate entry for Qualcomm Adreno GPU drivers drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails drm/msm/adreno: fix CP cycles stat retrieval on a7xx drm/msm/a7xx: allow writing to CP_BV counter selection registers drm: zynqmp_dpsub: Always register bridge Revert "drm/bridge: ti-sn65dsi83: Fix enable error path" drm/fb_dma: Add checks in drm_fb_dma_get_scanout_buffer() drm/fbdev-generic: Do not set physical framebuffer address drm/panthor: Fix the FW reset logic drm/panthor: Make sure we handle 'unknown group state' case properly ...
2024-05-08drm/amd/display: MST DSC check for older devicesAgustin Gutierrez
[Why] Some older MST hubs do not report DPCD registers according to specification. [How] This change re-applies commit c53655545141 ("drm/amd/display: dsc mst re-compute pbn for changes on hub"). With an additional check for these older MST devices. Reviewed-by: Swapnil Patel <swapnil.patel@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-08drm/amd/display: Fix DSC-re-computingAgustin Gutierrez
[Why] This fixes a bug introduced by commit c53655545141 ("drm/amd/display: dsc mst re-compute pbn for changes on hub"). The change caused light-up issues with a second display that required DSC on some MST docks. [How] Use Virtual DPCD for DSC caps in MST case. [Limitations] This change only affects MST DSC devices that follow specifications additional changes are required to check for old MST DSC devices such as ones which do not check for Virtual DPCD registers. Reviewed-by: Swapnil Patel <swapnil.patel@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-01drm/amd/display: Disable panel replay by default for nowMario Limonciello
Panel replay was enabled by default in commit 5950efe25ee0 ("drm/amd/display: Enable Panel Replay for static screen use case"), but it isn't working properly at least on some BOE and AUO panels. Instead of being static the screen is solid black when active. As it's a new feature that was just introduced that regressed VRR disable it for now so that problem can be properly root caused. Cc: Tom Chung <chiahsuan.chung@amd.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3344 Fixes: 5950efe25ee0 ("drm/amd/display: Enable Panel Replay for static screen use case") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Fix incorrect DSC instance for MSTHersen Wu
[Why] DSC debugfs, such as dp_dsc_clock_en_read, use aconnector->dc_link to find pipe_ctx for display. Displays connected to MST hub share the same dc_link. DSC instance is from pipe_ctx. This causes incorrect DSC instance for display connected to MST hub. [How] Add aconnector->sink check to find pipe_ctx. CC: stable@vger.kernel.org Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-26drm/amd/display: Fix uninitialized variables in DMAlex Hung
This fixes 11 UNINIT issues reported by Coverity. Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-26drm/amdgpu: add protype for print ip stateSunil Khatri
Add the protoype for print ip state to be used to print the registers in devcoredump during a gpu reset. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-26drm/amdgpu: add prototype for ip dumpSunil Khatri
Add the prototype to dump ip registers for all ips of different asics and set them to NULL for now. Based on the requirement add a function pointer for each of them. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-23drm/amd/display: Set color_mgmt_changed to true on unsuspendJoshua Ashton
Otherwise we can end up with a frame on unsuspend where color management is not applied when userspace has not committed themselves. Fixes re-applying color management on Steam Deck/Gamescope on S3 resume. Signed-off-by: Joshua Ashton <joshua@froggi.es> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-18drm/amd/display: Set color_mgmt_changed to true on unsuspendJoshua Ashton
Otherwise we can end up with a frame on unsuspend where color management is not applied when userspace has not committed themselves. Fixes re-applying color management on Steam Deck/Gamescope on S3 resume. Signed-off-by: Joshua Ashton <joshua@froggi.es> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-16drm/amd/display: Pass sequential ONO bit to DMCUB boot optionsNicholas Kazlauskas
[Why] IPS ono sequence ordering differs based on the ASIC. [How] Detect the ASIC ID revision and set the boot option accordingly. Feed it through the DCN35 DMUB functions. Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amd/display: Set VSC SDP Colorimetry same way for MST and SSTHarry Wentland
The previous check for the is_vsc_sdp_colorimetry_supported flag for MST sink signals did nothing. Simplify the code and use the same check for MST and SST. Cc: stable@vger.kernel.org Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amd/display: Program VSC SDP colorimetry for all DP sinks >= 1.4Harry Wentland
In order for display colorimetry to work correctly on DP displays we need to send the VSC SDP packet. We should only do so for panels with DPCD revision greater or equal to 1.4 as older receivers might have problems with it. Cc: stable@vger.kernel.org Cc: Joshua Ashton <joshua@froggi.es> Cc: Xaver Hugl <xaver.hugl@gmail.com> Cc: Melissa Wen <mwen@igalia.com> Cc: Agustin Gutierrez <Agustin.Gutierrez@amd.com> Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amd/display: Return max resolution supported by DWBAlex Hung
mode_config's max width x height is 4096x2160 and is higher than DWB's max resolution 3840x2160 which is returned instead. Cc: stable@vger.kernel.org Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amd/display: Skip on writeback when it's not applicableAlex Hung
[WHY] dynamic memory safety error detector (KASAN) catches and generates error messages "BUG: KASAN: slab-out-of-bounds" as writeback connector does not support certain features which are not initialized. [HOW] Skip them when connector type is DRM_MODE_CONNECTOR_WRITEBACK. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3199 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amd/display: add DCN 351 version for microcode loadLi Ma
There is a new DCN veriosn 3.5.1 need to load Signed-off-by: Li Ma <li.ma@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amd/display: Set VSC SDP Colorimetry same way for MST and SSTHarry Wentland
The previous check for the is_vsc_sdp_colorimetry_supported flag for MST sink signals did nothing. Simplify the code and use the same check for MST and SST. Cc: stable@vger.kernel.org Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amd/display: Program VSC SDP colorimetry for all DP sinks >= 1.4Harry Wentland
In order for display colorimetry to work correctly on DP displays we need to send the VSC SDP packet. We should only do so for panels with DPCD revision greater or equal to 1.4 as older receivers might have problems with it. Cc: stable@vger.kernel.org Cc: Joshua Ashton <joshua@froggi.es> Cc: Xaver Hugl <xaver.hugl@gmail.com> Cc: Melissa Wen <mwen@igalia.com> Cc: Agustin Gutierrez <Agustin.Gutierrez@amd.com> Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amd/display: Return max resolution supported by DWBAlex Hung
mode_config's max width x height is 4096x2160 and is higher than DWB's max resolution 3840x2160 which is returned instead. Cc: stable@vger.kernel.org Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amd/display: Allow RCG for Static Screen + LVP for DCN35Roman Li
[Why] We want to block IPS2 for static screen but allow it for power state transitions. [How] Set DalDisableIPS=6 for DCN35 which allows: 1. RCG during static screen 2. RCG during LVP 3. IPS2 for display off / S0i3 Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amd/display: Add handling for DC power modeJoshua Aberback
[Why] Future implementations will require a distinction between AC power and DC power (wall power and battery power, respectively). To accomplish this, adding a power mode parameter to certain dc interfaces, and adding a separate DML2 instance for DC mode validation. Default behaviour unchanged. Reviewed-by: Jun Lei <jun.lei@amd.com> Reviewed-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amd/display: Skip on writeback when it's not applicableAlex Hung
[WHY] dynamic memory safety error detector (KASAN) catches and generates error messages "BUG: KASAN: slab-out-of-bounds" as writeback connector does not support certain features which are not initialized. [HOW] Skip them when connector type is DRM_MODE_CONNECTOR_WRITEBACK. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3199 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amd/display: Add dummy interface for tracing DCN32 SMU messagesGeorge Shen
[Why/How] Some issues may require a trace of the previous SMU messages from DC to understand the context and aid in debugging. Actual logging to be implemented when needed. Reviewed-by: Josip Pavic <josip.pavic@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amd/display: FEC overhead should be checked once for mst slot numsHersen Wu
[Why] Mst slot nums equals to pbn / pbn_div. Today, pbn_div refers to dm_mst_get_pbn_divider -> dc_link_bandwidth_kbps. In dp_link_bandwidth_kbps, which includes effect of FEC overhead already. As result, we should not include effect of FEC overhead again while calculating pbn by kpbs_to_peak_pbn (stream_kbps). [How] Include FEC overhead within dp_link_bandwidth_kbps. Remove FEC overhead from kbps_to_peak_pbn. Reviewed-by: Wayne Lin <wayne.lin@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amd/display: Add timing pixel encoding for mst mode validationHersen Wu
[Why] Mode pbn is not calculated correctly because timing pixel encoding is not checked within convert_dc_color_depth_into_bpc. [How] Get mode kbps from dc_bandwidth_in_kbps_from_timing, then calculate pbn by kbps_to_peak_pbn. Reviewed-by: Wayne Lin <wayne.lin@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amd/display: add DCN 351 version for microcode loadLi Ma
There is a new DCN veriosn 3.5.1 need to load Signed-off-by: Li Ma <li.ma@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-27drm/amd/display: fix IPX enablementHamza Mahfooz
We need to re-enable idle power optimizations after entering PSR. Since, we get kicked out of idle power optimizations before entering PSR (entering PSR requires us to write to DCN registers, which isn't allowed while we are in IPS). Fixes: a9b1a4f684b3 ("drm/amd/display: Add more checks for exiting idle in DC") Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-27Revert "drm/amd/display: Fix sending VSC (+ colorimetry) packets for DP/eDP ↵Harry Wentland
displays without PSR" This causes flicker on a bunch of eDP panels. The info_packet code also caused regressions on other OSes that we haven't' seen on Linux yet, but that is likely due to the fact that we haven't had a chance to test those environments on Linux. We'll need to revisit this. This reverts commit 202260f64519e591b5cd99626e441b6559f571a3. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3207 Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3151 Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-03-27drm/amd/display: Remove plane and stream pointers from dc scratchAlvin Lee
[Why&How] Remove several plane and stream pointers from dc for code refactoring. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-27drm/amd/display: fix IPX enablementHamza Mahfooz
We need to re-enable idle power optimizations after entering PSR. Since, we get kicked out of idle power optimizations before entering PSR (entering PSR requires us to write to DCN registers, which isn't allowed while we are in IPS). Fixes: a9b1a4f684b3 ("drm/amd/display: Add more checks for exiting idle in DC") Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-22Revert "drm/amd/display: Fix sending VSC (+ colorimetry) packets for DP/eDP ↵Harry Wentland
displays without PSR" This causes flicker on a bunch of eDP panels. The info_packet code also caused regressions on other OSes that we haven't' seen on Linux yet, but that is likely due to the fact that we haven't had a chance to test those environments on Linux. We'll need to revisit this. This reverts commit 202260f64519e591b5cd99626e441b6559f571a3. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3207 Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3151 Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Fix function banner for amdgpu_dm_psr_disable_all()Roman Li
[WHY] Incorrect function name in function banner. [HOW] Correct name and brief description. Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Add monitor patch for specific eDPRyan Lin
[WHY] Some eDP panels' ext caps don't write initial values. The value of dpcd_addr (0x317) can be random and the backlight control interface will be incorrect. [HOW] Add new panel patches to remove sink ext caps. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.5.x Cc: Tsung-hua Lin <tsung-hua.lin@amd.com> Cc: Chris Chi <moukong.chi@amd.com> Reviewed-by: Wayne Lin <wayne.lin@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Ryan Lin <tsung-hua.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Enable DML2 debug flagsAurabindo Pillai
[WHY & HOW] Enable DML2 related debug config options in DM for testing purposes. Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Use freesync when `DRM_EDID_FEATURE_CONTINUOUS_FREQ` foundMario Limonciello
The monitor shipped with the Framework 16 supports VRR [1], but it's not being advertised. This is because the detailed timing block doesn't contain `EDID_DETAIL_MONITOR_RANGE` which amdgpu looks for to find min and max frequencies. This check however is superfluous for this case because update_display_info() calls drm_get_monitor_range() to get these ranges already. So if the `DRM_EDID_FEATURE_CONTINUOUS_FREQ` EDID feature is found then turn on freesync without extra checks. v2: squash in fix from Harry Closes: https://www.reddit.com/r/framework/comments/1b4y2i5/no_variable_refresh_rate_on_the_framework_16_on/ Closes: https://www.reddit.com/r/framework/comments/1b6vzcy/framework_16_variable_refresh_rate/ Closes: https://community.frame.work/t/resolved-no-vrr-freesync-with-amd-version/42338 Link: https://gist.github.com/superm1/e8fbacfa4d0f53150231d3a3e0a13faf Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-11Merge tag 'amd-drm-next-6.9-2024-03-08-1' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.9-2024-03-08-1: amdgpu: - DCN 3.5.1 support - Fixes for IOMMUv2 removal - UAF fix - Misc small fixes and cleanups - SR-IOV fixes - MCBP cleanup - devcoredump update - NBIF 6.3.1 support - VPE 6.1.1 support amdkfd: - Misc fixes and cleanups - GFX10.1 trap fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240308170741.3691166-1-alexander.deucher@amd.com
2024-03-08Merge tag 'amd-drm-next-6.9-2024-03-01' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.9-2024-03-01: amdgpu: - GC 11.5.1 updates - Misc display cleanups - NBIO 7.9 updates - Backlight fixes - DMUB fixes - MPO fixes - atomfirmware table updates - SR-IOV fixes - VCN 4.x updates - use RMW accessors for pci config registers - PSR fixes - Suspend/resume fixes - RAS fixes - ABM fixes - Misc code cleanups - SI DPM fix - Revert freesync video amdkfd: - Misc cleanups - Error handling fixes radeon: - use RMW accessors for pci config registers From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240301204857.13960-1-alexander.deucher@amd.com Signed-off-by: Dave Airlie <airlied@redhat.com>
2024-03-04drm/amd/display: handle range offsets in VRR rangesAlex Deucher
Need to check the offset bits for values greater than 255. v2: also update amdgpu_dm_connector values. Suggested-by: Mano Ségransan <mano.segransan@protonmail.com> Tested-by: Mano Ségransan <mano.segransan@protonmail.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3203 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-04drm/amd/display: add amdgpu_dm support for DCN351Hamza Mahfooz
Add Display Manager specific changes for DCN3.5.1. Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-29Reapply "Revert drm/amd/display: Enable Freesync Video Mode by default"Alex Deucher
This reverts commit 11b92df8a2f7f4605ccc764ce6ae4a72760674df. This conflicts with how compositors want to handle VRR. Now that compositors actually handle VRR, we probably don't need freesync video. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2985 Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-29drm/amd/display: check dc_link before dereferencingMelissa Wen
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:6683 amdgpu_dm_connector_funcs_force() warn: variable dereferenced before check 'dc_link' (see line 6663) Fixes: 967176179215 ("drm/amd/display: fix null-pointer dereference on edid reading") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-27drm/amd: Drop abm_level propertyMario Limonciello
This vendor specific property has never been used by userspace software and conflicts with the panel_power_savings sysfs file. That is a compositor and user could fight over the same data. Fixes: 63d0b87213a0 ("drm/amd/display: add panel_power_savings sysfs entry to eDP connectors") Suggested-by: Harry Wentland <Harry.Wentland@amd.com> Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com> Cc: "Sun peng Li (Leo)" <Sunpeng.Li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-26Merge v6.8-rc6 into drm-nextDaniel Vetter
Thomas Zimmermann asked to backmerge -rc6 for drm-misc branches, there's a few same-area-changed conflicts (xe and amdgpu mostly) that are getting a bit too annoying. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2024-02-22drm/amd/display: fix null-pointer dereference on edid readingMelissa Wen
Use i2c adapter when there isn't aux_mode in dc_link to fix a null-pointer derefence that happens when running igt@kms_force_connector_basic in a system with DCN2.1 and HDMI connector detected as below: [ +0.178146] BUG: kernel NULL pointer dereference, address: 00000000000004c0 [ +0.000010] #PF: supervisor read access in kernel mode [ +0.000005] #PF: error_code(0x0000) - not-present page [ +0.000004] PGD 0 P4D 0 [ +0.000006] Oops: 0000 [#1] PREEMPT SMP NOPTI [ +0.000006] CPU: 15 PID: 2368 Comm: kms_force_conne Not tainted 6.5.0-asdn+ #152 [ +0.000005] Hardware name: HP HP ENVY x360 Convertible 13-ay1xxx/8929, BIOS F.01 07/14/2021 [ +0.000004] RIP: 0010:i2c_transfer+0xd/0x100 [ +0.000011] Code: ea fc ff ff 66 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 55 53 <48> 8b 47 10 48 89 fb 48 83 38 00 0f 84 b3 00 00 00 83 3d 2f 80 16 [ +0.000004] RSP: 0018:ffff9c4f89c0fad0 EFLAGS: 00010246 [ +0.000005] RAX: 0000000000000000 RBX: 0000000000000005 RCX: 0000000000000080 [ +0.000003] RDX: 0000000000000002 RSI: ffff9c4f89c0fb20 RDI: 00000000000004b0 [ +0.000003] RBP: ffff9c4f89c0fb80 R08: 0000000000000080 R09: ffff8d8e0b15b980 [ +0.000003] R10: 00000000000380e0 R11: 0000000000000000 R12: 0000000000000080 [ +0.000002] R13: 0000000000000002 R14: ffff9c4f89c0fb0e R15: ffff9c4f89c0fb0f [ +0.000004] FS: 00007f9ad2176c40(0000) GS:ffff8d90fe9c0000(0000) knlGS:0000000000000000 [ +0.000003] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000004] CR2: 00000000000004c0 CR3: 0000000121bc4000 CR4: 0000000000750ee0 [ +0.000003] PKRU: 55555554 [ +0.000003] Call Trace: [ +0.000006] <TASK> [ +0.000006] ? __die+0x23/0x70 [ +0.000011] ? page_fault_oops+0x17d/0x4c0 [ +0.000008] ? preempt_count_add+0x6e/0xa0 [ +0.000008] ? srso_alias_return_thunk+0x5/0x7f [ +0.000011] ? exc_page_fault+0x7f/0x180 [ +0.000009] ? asm_exc_page_fault+0x26/0x30 [ +0.000013] ? i2c_transfer+0xd/0x100 [ +0.000010] drm_do_probe_ddc_edid+0xc2/0x140 [drm] [ +0.000067] ? srso_alias_return_thunk+0x5/0x7f [ +0.000006] ? _drm_do_get_edid+0x97/0x3c0 [drm] [ +0.000043] ? __pfx_drm_do_probe_ddc_edid+0x10/0x10 [drm] [ +0.000042] edid_block_read+0x3b/0xd0 [drm] [ +0.000043] _drm_do_get_edid+0xb6/0x3c0 [drm] [ +0.000041] ? __pfx_drm_do_probe_ddc_edid+0x10/0x10 [drm] [ +0.000043] drm_edid_read_custom+0x37/0xd0 [drm] [ +0.000044] amdgpu_dm_connector_mode_valid+0x129/0x1d0 [amdgpu] [ +0.000153] drm_connector_mode_valid+0x3b/0x60 [drm_kms_helper] [ +0.000000] __drm_helper_update_and_validate+0xfe/0x3c0 [drm_kms_helper] [ +0.000000] ? amdgpu_dm_connector_get_modes+0xb6/0x520 [amdgpu] [ +0.000000] ? srso_alias_return_thunk+0x5/0x7f [ +0.000000] drm_helper_probe_single_connector_modes+0x2ab/0x540 [drm_kms_helper] [ +0.000000] status_store+0xb2/0x1f0 [drm] [ +0.000000] kernfs_fop_write_iter+0x136/0x1d0 [ +0.000000] vfs_write+0x24d/0x440 [ +0.000000] ksys_write+0x6f/0xf0 [ +0.000000] do_syscall_64+0x60/0xc0 [ +0.000000] ? srso_alias_return_thunk+0x5/0x7f [ +0.000000] ? syscall_exit_to_user_mode+0x2b/0x40 [ +0.000000] ? srso_alias_return_thunk+0x5/0x7f [ +0.000000] ? do_syscall_64+0x6c/0xc0 [ +0.000000] ? do_syscall_64+0x6c/0xc0 [ +0.000000] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ +0.000000] RIP: 0033:0x7f9ad46b4b00 [ +0.000000] Code: 40 00 48 8b 15 19 b3 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 80 3d e1 3a 0e 00 00 74 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 48 89 [ +0.000000] RSP: 002b:00007ffcbd3bd6d8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 [ +0.000000] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9ad46b4b00 [ +0.000000] RDX: 0000000000000002 RSI: 00007f9ad48a7417 RDI: 0000000000000009 [ +0.000000] RBP: 0000000000000002 R08: 0000000000000064 R09: 0000000000000000 [ +0.000000] R10: 0000000000000000 R11: 0000000000000202 R12: 00007f9ad48a7417 [ +0.000000] R13: 0000000000000009 R14: 00007ffcbd3bd760 R15: 0000000000000001 [ +0.000000] </TASK> [ +0.000000] Modules linked in: ctr ccm rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device cmac algif_hash algif_skcipher af_alg bnep btusb btrtl btbcm btintel btmtk bluetooth uvcvideo videobuf2_vmalloc sha3_generic videobuf2_memops uvc jitterentropy_rng videobuf2_v4l2 videodev drbg videobuf2_common ansi_cprng mc ecdh_generic ecc qrtr binfmt_misc hid_sensor_accel_3d hid_sensor_magn_3d hid_sensor_gyro_3d hid_sensor_trigger industrialio_triggered_buffer kfifo_buf industrialio snd_ctl_led joydev hid_sensor_iio_common rtw89_8852ae rtw89_8852a rtw89_pci snd_hda_codec_realtek rtw89_core snd_hda_codec_generic intel_rapl_msr ledtrig_audio intel_rapl_common snd_hda_codec_hdmi mac80211 snd_hda_intel snd_intel_dspcfg kvm_amd snd_hda_codec snd_soc_dmic snd_acp3x_rn snd_acp3x_pdm_dma libarc4 snd_hwdep snd_soc_core kvm snd_hda_core cfg80211 snd_pci_acp6x snd_pcm nls_ascii snd_timer hp_wmi snd_pci_acp5x nls_cp437 snd_rn_pci_acp3x ucsi_acpi sparse_keymap ccp snd platform_profile snd_acp_config typec_ucsi irqbypass vfat sp5100_tco [ +0.000000] snd_soc_acpi fat rapl pcspkr wmi_bmof roles rfkill rng_core snd_pci_acp3x soundcore k10temp watchdog typec battery ac amd_pmc acpi_tad button hid_sensor_hub hid_multitouch evdev serio_raw msr parport_pc ppdev lp parport fuse loop efi_pstore configfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 btrfs blake2b_generic dm_crypt dm_mod efivarfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx libcrc32c crc32c_generic xor raid6_pq raid1 raid0 multipath linear md_mod amdgpu amdxcp i2c_algo_bit drm_ttm_helper ttm crc32_pclmul crc32c_intel drm_exec gpu_sched drm_suballoc_helper nvme ghash_clmulni_intel drm_buddy drm_display_helper sha512_ssse3 nvme_core ahci xhci_pci sha512_generic hid_generic xhci_hcd libahci rtsx_pci_sdmmc t10_pi i2c_hid_acpi drm_kms_helper i2c_hid mmc_core libata aesni_intel crc64_rocksoft_generic crypto_simd amd_sfh crc64_rocksoft scsi_mod usbcore cryptd crc_t10dif cec drm crct10dif_generic hid rtsx_pci crct10dif_pclmul scsi_common rc_core crc64 i2c_piix4 [ +0.000000] usb_common crct10dif_common video wmi [ +0.000000] CR2: 00000000000004c0 [ +0.000000] ---[ end trace 0000000000000000 ]--- Fixes: 0e859faf8670 ("drm/amd/display: Remove unwanted drm edid references") Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-22drm/amd/display: Fix memory leak in dm_sw_fini()Armin Wolf
After destroying dmub_srv, the memory associated with it is not freed, causing a memory leak: unreferenced object 0xffff896302b45800 (size 1024): comm "(udev-worker)", pid 222, jiffies 4294894636 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 6265fd77): [<ffffffff993495ed>] kmalloc_trace+0x29d/0x340 [<ffffffffc0ea4a94>] dm_dmub_sw_init+0xb4/0x450 [amdgpu] [<ffffffffc0ea4e55>] dm_sw_init+0x15/0x2b0 [amdgpu] [<ffffffffc0ba8557>] amdgpu_device_init+0x1417/0x24e0 [amdgpu] [<ffffffffc0bab285>] amdgpu_driver_load_kms+0x15/0x190 [amdgpu] [<ffffffffc0ba09c7>] amdgpu_pci_probe+0x187/0x4e0 [amdgpu] [<ffffffff9968fd1e>] local_pci_probe+0x3e/0x90 [<ffffffff996918a3>] pci_device_probe+0xc3/0x230 [<ffffffff99805872>] really_probe+0xe2/0x480 [<ffffffff99805c98>] __driver_probe_device+0x78/0x160 [<ffffffff99805daf>] driver_probe_device+0x1f/0x90 [<ffffffff9980601e>] __driver_attach+0xce/0x1c0 [<ffffffff99803170>] bus_for_each_dev+0x70/0xc0 [<ffffffff99804822>] bus_add_driver+0x112/0x210 [<ffffffff99807245>] driver_register+0x55/0x100 [<ffffffff990012d1>] do_one_initcall+0x41/0x300 Fix this by freeing dmub_srv after destroying it. Fixes: 743b9786b14a ("drm/amd/display: Hook up the DMUB service in DM") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-22drm/amd/display: adjust few initialization order in dmWayne Lin
[Why] Observe error message "Can't retrieve aconnector in hpd_rx_irq_offload_work" when boot up with a mst tbt4 dock connected. After analyzing, there are few parts needed to be adjusted: 1. hpd_rx_offload_wq[].aconnector is not initialzed before the dmub outbox hpd_irq handler get registered which causes the error message. 2. registeration of hpd and hpd_rx_irq event for usb4 dp tunneling is not aligned with legacy interface sequence [How] Put DMUB_NOTIFICATION_HPD and DMUB_NOTIFICATION_HPD_IRQ handler registration into register_hpd_handlers() to align other interfaces and get hpd_rx_offload_wq[].aconnector initialized earlier than that. Leave DMUB_NOTIFICATION_AUX_REPLY registered as it was since we need that while calling dc_link_detect(). USB4 connection status will be proactively detected by dc_link_detect_connection_type() in amdgpu_dm_initialize_drm_device() Cc: Stable <stable@vger.kernel.org> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-22drm/amd/display: fix null-pointer dereference on edid readingMelissa Wen
Use i2c adapter when there isn't aux_mode in dc_link to fix a null-pointer derefence that happens when running igt@kms_force_connector_basic in a system with DCN2.1 and HDMI connector detected as below: [ +0.178146] BUG: kernel NULL pointer dereference, address: 00000000000004c0 [ +0.000010] #PF: supervisor read access in kernel mode [ +0.000005] #PF: error_code(0x0000) - not-present page [ +0.000004] PGD 0 P4D 0 [ +0.000006] Oops: 0000 [#1] PREEMPT SMP NOPTI [ +0.000006] CPU: 15 PID: 2368 Comm: kms_force_conne Not tainted 6.5.0-asdn+ #152 [ +0.000005] Hardware name: HP HP ENVY x360 Convertible 13-ay1xxx/8929, BIOS F.01 07/14/2021 [ +0.000004] RIP: 0010:i2c_transfer+0xd/0x100 [ +0.000011] Code: ea fc ff ff 66 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 55 53 <48> 8b 47 10 48 89 fb 48 83 38 00 0f 84 b3 00 00 00 83 3d 2f 80 16 [ +0.000004] RSP: 0018:ffff9c4f89c0fad0 EFLAGS: 00010246 [ +0.000005] RAX: 0000000000000000 RBX: 0000000000000005 RCX: 0000000000000080 [ +0.000003] RDX: 0000000000000002 RSI: ffff9c4f89c0fb20 RDI: 00000000000004b0 [ +0.000003] RBP: ffff9c4f89c0fb80 R08: 0000000000000080 R09: ffff8d8e0b15b980 [ +0.000003] R10: 00000000000380e0 R11: 0000000000000000 R12: 0000000000000080 [ +0.000002] R13: 0000000000000002 R14: ffff9c4f89c0fb0e R15: ffff9c4f89c0fb0f [ +0.000004] FS: 00007f9ad2176c40(0000) GS:ffff8d90fe9c0000(0000) knlGS:0000000000000000 [ +0.000003] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000004] CR2: 00000000000004c0 CR3: 0000000121bc4000 CR4: 0000000000750ee0 [ +0.000003] PKRU: 55555554 [ +0.000003] Call Trace: [ +0.000006] <TASK> [ +0.000006] ? __die+0x23/0x70 [ +0.000011] ? page_fault_oops+0x17d/0x4c0 [ +0.000008] ? preempt_count_add+0x6e/0xa0 [ +0.000008] ? srso_alias_return_thunk+0x5/0x7f [ +0.000011] ? exc_page_fault+0x7f/0x180 [ +0.000009] ? asm_exc_page_fault+0x26/0x30 [ +0.000013] ? i2c_transfer+0xd/0x100 [ +0.000010] drm_do_probe_ddc_edid+0xc2/0x140 [drm] [ +0.000067] ? srso_alias_return_thunk+0x5/0x7f [ +0.000006] ? _drm_do_get_edid+0x97/0x3c0 [drm] [ +0.000043] ? __pfx_drm_do_probe_ddc_edid+0x10/0x10 [drm] [ +0.000042] edid_block_read+0x3b/0xd0 [drm] [ +0.000043] _drm_do_get_edid+0xb6/0x3c0 [drm] [ +0.000041] ? __pfx_drm_do_probe_ddc_edid+0x10/0x10 [drm] [ +0.000043] drm_edid_read_custom+0x37/0xd0 [drm] [ +0.000044] amdgpu_dm_connector_mode_valid+0x129/0x1d0 [amdgpu] [ +0.000153] drm_connector_mode_valid+0x3b/0x60 [drm_kms_helper] [ +0.000000] __drm_helper_update_and_validate+0xfe/0x3c0 [drm_kms_helper] [ +0.000000] ? amdgpu_dm_connector_get_modes+0xb6/0x520 [amdgpu] [ +0.000000] ? srso_alias_return_thunk+0x5/0x7f [ +0.000000] drm_helper_probe_single_connector_modes+0x2ab/0x540 [drm_kms_helper] [ +0.000000] status_store+0xb2/0x1f0 [drm] [ +0.000000] kernfs_fop_write_iter+0x136/0x1d0 [ +0.000000] vfs_write+0x24d/0x440 [ +0.000000] ksys_write+0x6f/0xf0 [ +0.000000] do_syscall_64+0x60/0xc0 [ +0.000000] ? srso_alias_return_thunk+0x5/0x7f [ +0.000000] ? syscall_exit_to_user_mode+0x2b/0x40 [ +0.000000] ? srso_alias_return_thunk+0x5/0x7f [ +0.000000] ? do_syscall_64+0x6c/0xc0 [ +0.000000] ? do_syscall_64+0x6c/0xc0 [ +0.000000] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ +0.000000] RIP: 0033:0x7f9ad46b4b00 [ +0.000000] Code: 40 00 48 8b 15 19 b3 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 80 3d e1 3a 0e 00 00 74 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 48 89 [ +0.000000] RSP: 002b:00007ffcbd3bd6d8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 [ +0.000000] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9ad46b4b00 [ +0.000000] RDX: 0000000000000002 RSI: 00007f9ad48a7417 RDI: 0000000000000009 [ +0.000000] RBP: 0000000000000002 R08: 0000000000000064 R09: 0000000000000000 [ +0.000000] R10: 0000000000000000 R11: 0000000000000202 R12: 00007f9ad48a7417 [ +0.000000] R13: 0000000000000009 R14: 00007ffcbd3bd760 R15: 0000000000000001 [ +0.000000] </TASK> [ +0.000000] Modules linked in: ctr ccm rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device cmac algif_hash algif_skcipher af_alg bnep btusb btrtl btbcm btintel btmtk bluetooth uvcvideo videobuf2_vmalloc sha3_generic videobuf2_memops uvc jitterentropy_rng videobuf2_v4l2 videodev drbg videobuf2_common ansi_cprng mc ecdh_generic ecc qrtr binfmt_misc hid_sensor_accel_3d hid_sensor_magn_3d hid_sensor_gyro_3d hid_sensor_trigger industrialio_triggered_buffer kfifo_buf industrialio snd_ctl_led joydev hid_sensor_iio_common rtw89_8852ae rtw89_8852a rtw89_pci snd_hda_codec_realtek rtw89_core snd_hda_codec_generic intel_rapl_msr ledtrig_audio intel_rapl_common snd_hda_codec_hdmi mac80211 snd_hda_intel snd_intel_dspcfg kvm_amd snd_hda_codec snd_soc_dmic snd_acp3x_rn snd_acp3x_pdm_dma libarc4 snd_hwdep snd_soc_core kvm snd_hda_core cfg80211 snd_pci_acp6x snd_pcm nls_ascii snd_timer hp_wmi snd_pci_acp5x nls_cp437 snd_rn_pci_acp3x ucsi_acpi sparse_keymap ccp snd platform_profile snd_acp_config typec_ucsi irqbypass vfat sp5100_tco [ +0.000000] snd_soc_acpi fat rapl pcspkr wmi_bmof roles rfkill rng_core snd_pci_acp3x soundcore k10temp watchdog typec battery ac amd_pmc acpi_tad button hid_sensor_hub hid_multitouch evdev serio_raw msr parport_pc ppdev lp parport fuse loop efi_pstore configfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 btrfs blake2b_generic dm_crypt dm_mod efivarfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx libcrc32c crc32c_generic xor raid6_pq raid1 raid0 multipath linear md_mod amdgpu amdxcp i2c_algo_bit drm_ttm_helper ttm crc32_pclmul crc32c_intel drm_exec gpu_sched drm_suballoc_helper nvme ghash_clmulni_intel drm_buddy drm_display_helper sha512_ssse3 nvme_core ahci xhci_pci sha512_generic hid_generic xhci_hcd libahci rtsx_pci_sdmmc t10_pi i2c_hid_acpi drm_kms_helper i2c_hid mmc_core libata aesni_intel crc64_rocksoft_generic crypto_simd amd_sfh crc64_rocksoft scsi_mod usbcore cryptd crc_t10dif cec drm crct10dif_generic hid rtsx_pci crct10dif_pclmul scsi_common rc_core crc64 i2c_piix4 [ +0.000000] usb_common crct10dif_common video wmi [ +0.000000] CR2: 00000000000004c0 [ +0.000000] ---[ end trace 0000000000000000 ]--- Fixes: 0e859faf8670 ("drm/amd/display: Remove unwanted drm edid references") Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-22drm/amdgpu/display: Address kdoc for 'is_psr_su' in 'fill_dc_dirty_rects'Srinivasan Shanmugam
The is_psr_su parameter is a boolean flag indicating whether the Panel Self Refresh Selective Update (PSR SU) feature is enabled which is a power-saving feature that allows only the updated regions of the screen to be refreshed, reducing the amount of data that needs to be sent to the display. Fixes the below with gcc W=1: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:5257: warning: Function parameter or member 'is_psr_su' not described in 'fill_dc_dirty_rects' Fixes: d16df040c8da ("drm/amdgpu: make damage clips support configurable") Cc: stable@vger.kernel.org Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-22drm/amd/display: Fix memory leak in dm_sw_fini()Armin Wolf
After destroying dmub_srv, the memory associated with it is not freed, causing a memory leak: unreferenced object 0xffff896302b45800 (size 1024): comm "(udev-worker)", pid 222, jiffies 4294894636 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 6265fd77): [<ffffffff993495ed>] kmalloc_trace+0x29d/0x340 [<ffffffffc0ea4a94>] dm_dmub_sw_init+0xb4/0x450 [amdgpu] [<ffffffffc0ea4e55>] dm_sw_init+0x15/0x2b0 [amdgpu] [<ffffffffc0ba8557>] amdgpu_device_init+0x1417/0x24e0 [amdgpu] [<ffffffffc0bab285>] amdgpu_driver_load_kms+0x15/0x190 [amdgpu] [<ffffffffc0ba09c7>] amdgpu_pci_probe+0x187/0x4e0 [amdgpu] [<ffffffff9968fd1e>] local_pci_probe+0x3e/0x90 [<ffffffff996918a3>] pci_device_probe+0xc3/0x230 [<ffffffff99805872>] really_probe+0xe2/0x480 [<ffffffff99805c98>] __driver_probe_device+0x78/0x160 [<ffffffff99805daf>] driver_probe_device+0x1f/0x90 [<ffffffff9980601e>] __driver_attach+0xce/0x1c0 [<ffffffff99803170>] bus_for_each_dev+0x70/0xc0 [<ffffffff99804822>] bus_add_driver+0x112/0x210 [<ffffffff99807245>] driver_register+0x55/0x100 [<ffffffff990012d1>] do_one_initcall+0x41/0x300 Fix this by freeing dmub_srv after destroying it. Fixes: 743b9786b14a ("drm/amd/display: Hook up the DMUB service in DM") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-22drm/amd/display: adjust few initialization order in dmWayne Lin
[Why] Observe error message "Can't retrieve aconnector in hpd_rx_irq_offload_work" when boot up with a mst tbt4 dock connected. After analyzing, there are few parts needed to be adjusted: 1. hpd_rx_offload_wq[].aconnector is not initialzed before the dmub outbox hpd_irq handler get registered which causes the error message. 2. registeration of hpd and hpd_rx_irq event for usb4 dp tunneling is not aligned with legacy interface sequence [How] Put DMUB_NOTIFICATION_HPD and DMUB_NOTIFICATION_HPD_IRQ handler registration into register_hpd_handlers() to align other interfaces and get hpd_rx_offload_wq[].aconnector initialized earlier than that. Leave DMUB_NOTIFICATION_AUX_REPLY registered as it was since we need that while calling dc_link_detect(). USB4 connection status will be proactively detected by dc_link_detect_connection_type() in amdgpu_dm_initialize_drm_device() Cc: Stable <stable@vger.kernel.org> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2024-06-07 11:30:34 +0000